TH-C550M.NA1UTT_RH0074C_ENG
DVD/VCR
Home Theater System
SD-V57HTSU
OWNER’S MANUAL
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
©2005 Toshiba Corporation
This device does not tape-record copy protected DVD Video Discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. - All these safety and oper-
ating instructions should be read before the product is
operated.
11. Only use attachments/accessories specified by
the manufacturer.
2. Keep these instructions. - The safety, operating and
use instructions should be retained for future refer-
ence.
3. Heed all warnings. - All warnings on the product and
in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use
instructions should be followed.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution
when moving the cart/product combination to
avoid injury from tip-over.
5. Do not use this product near water. – For example:
near a bath tub, wash bowl, kitchen sink, laundry tub,
in a wet basement; or near a swimming pool; and
other areas located near water.
13. Unplug this product during lightning storms or
when unused for long periods of time.
6. Clean only with dry cloth. – Unplug this product from
the wall outlet before cleaning. Do not use liquid
cleaners.
14. Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the product, the product
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over-heating. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in instal-
lation such as a bookcase or rack unless proper ven-
tilation is provided or the manufacturer’s instructions
have been adhered to.
8. Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A ground-
ing type plug has two blades and a third ground-
ing prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Still Picture and Frame-by-Frame Playback . . . 30
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Random. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Marker Search . . . . . . . . . . . . . . . . . . . . . . . . . 32
Changing Video Mode . . . . . . . . . . . . . . . . . . . 32
Introduction
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . 3
Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes on Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Selecting the Viewing Source. . . . . . . . . . . . . . . . . . 6
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Display Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Special DVD Features . . . . . . . . . . . . . . . . . . . . . . 32
ꢀ
Checking the contents of
DVD Video discs: Menus . . . . . . . . . . . . . . . . . 32
ꢀ
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
ꢀ
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Preparation
ꢀ
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . 32
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14
Connecting Antenna/Cable TV to a
ꢀ
Changing the Audio Language . . . . . . . . . . . . . 32
ꢀ
Changing the Audio Channel . . . . . . . . . . . . . . 32
DVD/VCR Receiver . . . . . . . . . . . . . . . . . . . . . . . . 11
Basic TV Connections . . . . . . . . . . . . . . . . . . . . . . 12
Optional TV Connections . . . . . . . . . . . . . . . . . . . . 12
Speaker System Connections. . . . . . . . . . . . . . . . . 13
Speaker Positioning . . . . . . . . . . . . . . . . . . . . . . . . 13
Radio Antenna Connections . . . . . . . . . . . . . . . . . . 14
Accessory Audio/Video (A/V) Connections to
ꢀ
Subtitle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
ꢀ
Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Audio CD and MP3/WMA Disc Operation. . . . . . . 33-34
Playing an Audio CD and MP3/WMA Discs. . . . . . . 33
Notes on MP3 Recordings . . . . . . . . . . . . . . . . . . . 33
ꢀ
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
ꢀ
Moving to another Tracks . . . . . . . . . . . . . . . . . 34
DVD/VCR Receiver . . . . . . . . . . . . . . . . . . . . . . . . 14
Digital Device Connections. . . . . . . . . . . . . . . . . . . 14
Selecting the Input/Output Source . . . . . . . . . . . . . . 15
Before Operation - Sound Mode Descriptions . . . . . 16
Mini Glossary for Audio Stream & Surround Mode . 16
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
VCR Operation Setup . . . . . . . . . . . . . . . . . . . . . . 17-19
On-Screen Display(OSD) . . . . . . . . . . . . . . . . . . . . 17
On-Screen Menus Setup . . . . . . . . . . . . . . . . . . . . 17
VCR Setup Menu Options . . . . . . . . . . . . . . . . . . . 18
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . 19
DVD Operation Setup . . . . . . . . . . . . . . . . . . . . . . 20-23
General Explanation. . . . . . . . . . . . . . . . . . . . . . . . 20
On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . 20
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 21-23
ꢀ
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
ꢀ
Random. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
ꢀ
Repeat Track/ All/ Off . . . . . . . . . . . . . . . . . . . . 34
ꢀ
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
ꢀ
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . . . 34
ꢀ
Changing the Audio Channel . . . . . . . . . . . . . . 34
JPEG File Operation . . . . . . . . . . . . . . . . . . . . . . . . . 35
Viewing JPEG Files on a Disc . . . . . . . . . . . . . . . . 35
ꢀ
Selecting other Files. . . . . . . . . . . . . . . . . . . . . 35
ꢀ
Still Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
ꢀ
To flip the picture . . . . . . . . . . . . . . . . . . . . . . . 35
ꢀ
To rotate picture . . . . . . . . . . . . . . . . . . . . . . . . 35
Notes on JPEG Files . . . . . . . . . . . . . . . . . . . . . . . 35
Programmed Playback. . . . . . . . . . . . . . . . . . . . . . . . 36
Programmed Playback with Audio CDs
and MP3/WMA Discs . . . . . . . . . . . . . . . . . . . . . . . 36
Programmed Playback with Video CD . . . . . . . . . . 36
ꢀ
Repeat Programmed Tracks. . . . . . . . . . . . . . . 36
ꢀ
General Operation . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ
Erasing a Track from Program List . . . . . . . . . . 36
ꢀ
Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ
Erasing the whole Program List . . . . . . . . . . . . 36
ꢀ
Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39
Presetting the Radio Stations . . . . . . . . . . . . . . . . . 38
Listening to the Radio . . . . . . . . . . . . . . . . . . . . . . 38
To Clear the Stored Radio Stations. . . . . . . . . . . . . 38
Tuning into a Station Manually . . . . . . . . . . . . . . . . 39
For your reference . . . . . . . . . . . . . . . . . . . . . . . . . 39
Tuning into a Station Automatically. . . . . . . . . . . . . 39
Labeling Stations . . . . . . . . . . . . . . . . . . . . . . . . . . 39
ꢀ
Progressive Scan. . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ
Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . 22
ꢀ
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ꢀ
Parental Control . . . . . . . . . . . . . . . . . . . . . . . . 23
Operation
VCR Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-29
Normal Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Special Effect Playbacks . . . . . . . . . . . . . . . . . . . . 24
ꢀ
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Reference
ꢀ
Still Picture and Frame-by-Frame Playback . . . 24
Controlling Your TV with the Supplied Remote . 40-41
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 42-43
Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . 44
Area Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-47
Limited United States Warranty. . . . . . . . . . . . . . . . . 48
ꢀ
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Variable playback speed control . . . . . . . . . . . . 24
ꢀ
Normal Recording . . . . . . . . . . . . . . . . . . . . . . . . . 25
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . 25-26
Instant Timer Recording . . . . . . . . . . . . . . . . . . . . . 27
Dubbing and Editing. . . . . . . . . . . . . . . . . . . . . . . . 27
Copying from DVD to VCR. . . . . . . . . . . . . . . . . . . 27
VHS Hi-Fi Stereo System/MTS Broadcast . . . . . . . 28
Tape Counter Memory Feature. . . . . . . . . . . . . . . . 29
Additional Information. . . . . . . . . . . . . . . . . . . . . . . 29
DVD and Video CD Operation. . . . . . . . . . . . . . . . 30-32
Playing DVD and Video CD . . . . . . . . . . . . . . . . . . 30
General Features . . . . . . . . . . . . . . . . . . . . . . . 30-32
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Note: Indicates special operating features of this unit.
ꢀ
Moving to another TITLE . . . . . . . . . . . . . . . . . 30
Moving to another CHAPTER/TRACK . . . . . . . 30
Tip:
Indicates tips and hints for making the task easier.
ꢀ
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Note on DTS-encoded CDs
Playable Discs
When playing DTS-encoded CDs, excessive noise may
be exhibited from the analog stereo output. To avoid
possible damage to the audio system, turn down the
volume before playing back such discs, adjust the vol-
ume gradually, and keep the volume level low. To enjoy
DTS Digital Surround® playback, an external 5.1 chan-
nel DTS Digital Surround® decoder system must be con-
nected to the digital output of the unit.
DVD
(8 cm/12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
Audio CD
(8 cm/12 cm disc)
Disc-related Terms
In addition, this unit can play a DVD-R/ RW, SVCD and
CD-R or CD-RW that contains audio titles, MP3, WMA
or JPEG files.
Title (DVD only)
The main film content or accompanying feature content
or additional feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
Notes
ꢀ Depending on the conditions of the recording equip-
ment or the CD-R/RW (or DVD-R/ RW) disc itself,
some CD-R/RW (or DVD-R/ RW) discs cannot be
played on the unit.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chap-
ters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
ꢀ Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
ꢀ Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal). It may result in malfunctions.
Track (Video CD and Audio CD only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Notes on DVDs and Video CDs
Because of problems and errors that can occur during
the creation of DVD and Video CD software and/or the
manufacture of DVD and Video CD discs, Toshiba can-
not guarantee that this DVD/VCR Receiver will play
every feature of every DVD bearing the DVD logo
and/or every Video CD bearing the CD logo. As one of
the creators of DVD technology, Toshiba DVD players
are manufactured using the highest standards of quality,
and as a result, such incompatibilities are rare. If you
happen to experience any difficulty playing a DVD or a
Video CD on this DVD/VCR Receiver, please feel free
to call our Consumer Solution Center (see page 49).
Scene
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into sec-
tions called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
A scene is composed of one or several tracks.
Types of Video CDs
There are two types of Video CDs:
Notes on copyright
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc.
The unauthorized recording, use, distribution, or revi-
sion of television programs, videotapes, DVDs and
other materials, is prohibited under the Copyright Laws
of the United States and other countries, and may sub-
ject you to civil and/or criminal liability.
This product incorporates copyright protection technolo-
gy that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be author-
ized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless other-
wise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Regional code of the DVD/VCR Receiver and DVDs
This DVD/VCR Receiver is designed and man-
ufactured for playback of region “1” encoded
DVD software. The region code on the labels of
1
some DVDs indicates which type of player can
play those discs. This unit can only play DVDs labelled
“1” or “ALL”. If you try to play any other discs, the mes-
sage “Check Regional Code” will appear on the TV
screen. Some DVDs that have no region code label
may still be subject to area restrictions and therefore
not playable.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Continued)
Cleaning discs
Precautions
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
Handling the unit
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
To keep the surface clean
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Cleaning the unit
About Symbols
To clean the cabinet
About the
symbol display
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
“
” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not available at that moment or with that spe-
cific DVD video disc.
To obtain a clear picture
About the disc symbols for instructions
The DVD/VCR Receiver is a high-tech, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
A section whose title has one of the following symbols are
applicable only to those discs represented by the symbol.
DVD DVDs.
CD
Audio CDs.
For details, please contact your nearest dealer.
VCD2.0
Video CDs with the PBC (playback control)
function.
Moisture Condensation
VCD1.1
Video CDs without the PBC (playback control)
function.
Never operate the DVD/VCR Receiver immediately after
moving it from a cold location to a warm location. Leave
it for two or three hours without operating it. If you use
the DVD/VCR Receiver in such a situation, it may dam-
age discs/tapes and internal parts.
MP3 MP3 Discs.
WMA Discs.
JPEG Files.
WMA
JPEG
Notes on Discs
Selecting the Viewing Source
You must select one of your output sources (DVD or
Handling discs
VCR) to view on the TV screen.
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
• If you want to view DVD deck output source:
Press DVD/CD until DVD indicator in the display window lights
and output source of DVD deck is viewed on the TV screen.
• If you want to view VCR deck output source:
Press VCR until VCR indicator in the display window lights and
output source of VCR deck is viewed on the TV screen.
• If you want to listen to AM/FM radio broadcasts:
Press FM/AM until RADIO indicator in the display window lights
and the frequency band appears on the TV screen.
Do not stick paper or tape on the disc.
Notes
• If you insert a disc while the DVD/VCR Receiver is in
the VCR mode, the DVD/VCR Receiver will switch to
DVD mode automatically.
• If you insert a cassette tape without an erasure pre-
vention tab intact while the DVD/VCR Receiver is in
the DVD mode, the DVD/VCR Receiver will switch to
VCR mode automatically.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature
increase inside the car.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
0Front Panel
EJECT
ON/STANBY I/1
Switches the DVD/VCR Receiver ON and OFF.
Ejects the tape in the VCR deck.
VOLUME
Adjusts volume of speakers.
LINE IN 2 (VIDEO / AUDIO (L/R) input
Connect the audio/video output of an
external source (Audio system, TV/ Monitor,
another VCR).
N (PLAY)
To play back a recorded
tape or disc.
Disc Tray (DVD deck)
Insert a disc here.
TUNING (
/
)
Selects FM and AM band.
COPY/MEMORY
Press to copy a DVD in the DVD deck to a VHS tape
in the VCR deck.
Memorizes currently tuned Radio frequency (station).
OPEN/CLOSE
Opens or closes the disc tray.
Cassette Compartment (VCR deck)
Insert a video cassette here.
DVD/VCR
Toggles control between
the DVD deck and the
VCR deck.
RADIO
Selects Radio operation
mode.
zREC
CH/PRESET (
/
)
To record normally or to activate
Scans up or down through
memorized channels or radio
frequencies (stations).
Instant Timer Recording.
X (PAUSE/STEP)
Pause playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
Remote Sensor
Point the DVD/VCR Receiver remote
control here.
Display window
Shows the current status of the
DVD/VCR Receiver.
x (STOP)
Stops playback of a disc or tape.
./m
DVD: Go to beginning of current chapter/track or Press two times in quick successions to go
to previous chapter/track. Press and hold for a fast reverse search.
VCR: Rewinds the tape during the STOP mode or for fast reverse picture search.
M/>
DVD: Go to NEXT chapter/track. Press and hold for two seconds for a fast forward search.
VCR: Advances the tape during the STOP mode or for fast forward picture search.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Window
Indicates encoding format of the current disc.
A cassette is in the VCR deck.
RADIO Indicates RADIO mode is active
MUTE The speaker sound is muted.
Indicates sound mode is
DOLBY PRO LOGIC or DOLBY PRO LOGIC II.
SAP Indicates when a SAP BILINGUAL
broadcast is being received.
HI-FI Indicates the unit is playing
back a tape recorded in Hi-Fi.
REC DVD/VCR Receiver is Recording.
COPY DVD to VCR copy
is in progress.
TIMER DVD/VCR
Receiver is in timer
recording or a timer
recording is programmed.
Lights when a disc
is in the DVD deck
PROG Indicates
when programmed
playback is in
progress.
Indicates clock, total playing time, elapsed time, remaining time, title
number, chapter/track number, channel, radio frequency, level, volume,
channel or current deck status (Playback, Pause, Mode, etc).
Lights when TV mode is active.
The VCR deck is selected.
Indicates repeat mode
DVD DVD inserted.
PHOTO Photo disc inserted.
VCD Video CD inserted.
MP3 MP3 disc inserted.
ST Indicates a stereo broadcast is being received.
Indicates when the Progressive scan playback is in progress.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
TV POWER
Switches TV ON and OFF.
POWER
(
)
I/1
Switches DVD/VCR Receiver ON and OFF.
INPUT ꢀ
- Selects the VCR deck’s source
ꢀ TV
To control multi-brand TV.
(Tuner, LINE 1, or LINE 2) in VCR mode.
- Selects the TV external source in TV mode.
ꢀ DVD/CD
To control DVD/CD operating.
AUX ꢀ
To listen to an audio source connected to the
DIGITAL AUDIO IN (OPTICAL) jack with
video from LINE 1.
ꢀ VCR
To control VCR operating.
ꢀ FM/AM
Selects the DVD/VCR Receiver’s tuner as
the listening choice (FM and AM bands).
SOUND MODE ꢀ
Selects sound mode between BYPASS, PRO
LOGIC, PRO LOGIC II (MOVIE, MUSIC,
MATRIX) and 3D SURROUND.
PROGRAM
Accesses or removes Program menu.
COUNT RESET, CLEAR
- Resets tape counter to 0:00:00
- Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
OPEN/CLOSE, EJECT
(
)
ꢀ
- Opens and closes the disc tray.
- Ejects the tape in the VCR deck.
0-9 numerical buttons
Selects numbered options in a menu.
TOP MENU
Displays the disc’s Title menu, if available.
ZOOM
Enlarges DVD/VCD video image.
DISC MENU
Accesses menu on a DVD disc.
ANGLE ꢀ
Selects a DVD camera angle if
available.
RETURN
- Removes the setup menu.
- Displays the menu of a video CD with
PBC.
SUBTITLE ꢀ
Selects a subtitle language.
AUDIO ꢀ
Selects an audio language (DVD) or an audio
channel (CD).
TUNING (v/V)
To tune in the desired station.
MARKER
Marks any point during playback.
SLOW ꢀ
Forward slow playback of tape.
SEARCH
Displays MARKER SEARCH menu.
STOP ꢀ
Stops playback.
VOLUME (v
/V)
PAUSE/STEP ꢀ
Pause playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
-
Adjusts volume of speaker.
-Adjusts volume of TV in TV mode.
DISPLAY, CLK/CNT
Accesses On-Screen display.
Switches among the clock, tape counter and
tape remaining modes on the display.
PLAY ꢀ
Starts playback.
REW ꢀ
- For fast reverse picture search.
- Rewinds the tape during the STOP mode.
b/B/v/V (left/right/up/down)
- Selects an option in the menu.
- CH/TRK (v/V): Selects VCR channels in
VCR mode ; Selects TV channels in TV
mode.
- Manually adjusts the tape’s picture
onscreen in VCR mode.
- b/B can also change the speed of VCR
playback. For example, slow, still, 2x play,
3x play, review and cue.
FWD ꢀ
- For fast forward picture search.
- Advances the tape during the STOP mode.
SKIP
(
)
ꢀ
.
- Skip to beginning of current DVD/CD chap-
ter or track, press twice in quick succession
to go to previous DVD/CD chapter or track.
- Press and hold for a fast reverse picture
search in DVD mode.
TV/VCR
To view channels selected by the VCR tuner
or by the TV tuner.
SKIP
(
)
ꢀ
>
- Skip to next DVD/CD chapter or track.
- Press and hold for a fast forward picture
search in DVD mode.
ENTER, MEMORY
- Acknowledges menu selection.
- Displays functions on the TV screen.
Note
REC/ITR (z)
ꢀ
SETUP, MENU
Records normally or activates Instant Timer
Recording.
This remote control uses the
same buttons for VCR and
DVD functions (ex. PLAY).
To use the VCR, first press
the VCR button.
Accesses or removes DVD Setup menu and
VCR menu.
REPEAT A-B, SP/SLP ꢀ
- Repeats sequence.
- Selects recording speed.
MUTE
Turns off sound from speaker connectors.
REPEAT ꢀ
Repeat chapter, track, title, all.
To use the DVD, first press
the DVD/CD button.
RANDOM ꢀ
Plays tracks in random order.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
VCR IN LINE 1 (VIDEO IN/AUDIO IN
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
(Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor, Another
VCR).
Connect to a TV with video and audio inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs. FOR DVD
VIEWING ONLY.
AC Power Cord
Plug into the power source.
ANT.IN
Connect the VHF/UHF/CATV
antenna to this terminal.
RF.OUT
Connect to a TV with RF coaxial inputs.
S-VIDEO OUT (DVD OUT)
Connect to a S-Video Input on TV. FOR DVD VIEWING ONLY.
SPEAKER Connectors
Connect the six supplied speakers to these terminals.
DIGITAL AUDIO IN (OPTICAL)
Connect to a digital audio output on a digital device.
AM Antenna Connectors
Connect the AM antenna to this terminal.
Do not touch the inner pins of the jacks on the rear
panel.
FM Antenna Connectors
Connect the FM antenna to this terminal.
Electrostatic discharge may cause permanent dam-
age to the unit.
Caution
Never throw batteries into a fire.
Remote Control Operation Range
Point the remote control at the remote sensor and
press the buttons.
ꢀ Distance: About 7m (23ft) from the front of the
remote sensor
ꢀ Angle: About 30° in each direction of the front of the
remote sensor
Notes
ꢀ Be sure to use AAA size batteries.
ꢀ Dispose of batteries in a designated disposal area.
ꢀ Batteries should always be disposed of with the environment
in mind. Always dispose of batteries in accordance with
applicable laws and regulations.
ꢀ If the remote control does not operate correctly, or if the
operating range becomes reduced, replace batteries with
new ones.
ꢀ When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix bat-
tery types or use new and used batteries in combination.
ꢀ Always remove batteries from remote control if they are dead
or if the remote control is not to be used for an extended
period of time. This will prevent battery acid from leaking into
the battery compartment.
Remote control battery installation
Detach the battery cover on the rear of
the remote control, and insert two R03
(size AAA) batteries with
aligned correctly.
and
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Tips
Without Cable Box
If your cable wire is connected to your TV without a converter
or descrambler box, unscrew the wire from your TV and attach
it to the ANT.IN jack on the DVD/VCR Receiver. Use the sup-
plied round coaxial cable to connect between the DVD/VCR
Receiver’s RF.OUT jack and the 75 ohm antenna input jack on
the TV. With this connection, you can receive all midband,
super band, and hyperband channels.
ꢀ
Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
DVD/VCR Receiver. Use connections described on pages
11-14.
ꢀ
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the best
connections.
With Cable Box
If a converter is required in your cable system, follow the
instruction below:
The cable hookup permits both TV and DVD/VCR Receiver
operation.
To view or record a CATV channel
Caution
ꢀ
ꢀ
Make sure the DVD/VCR Receiver is connected directly to
the TV. Tune the TV to the correct video input channel.
Do not connect the DVD/VCR Receiver’s DVD/VCR AUDIO
OUT jack to the phono in jack (record deck) of your audio
system.
ꢀ
ꢀ
Do not connect your DVD/VCR Receiver via your VCR. The
DVD image could be distorted by the copy protection sys-
tem.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materials,
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and/or
criminal liability.
1 Tune the TV to the DVD/VCR Receiver output channel (CH
3 or 4).
2 Set the DVD/VCR Receiver channel selector to the output
channel of the Cable Converter box using CH/TRK (v/V) or
number (0-9) of your DVD/VCR Receiver. (Example: CH3)
3 Select the channel to view at the Cable Converter Box.
Notes
ꢀ With this connection, you CANNOT record one program
while viewing another.
Connecting Antenna/Cable TV to
DVD/VCR Receiver
ꢀ If you are using a cable box to tune channels, it is not nec-
essary to do Auto Channel Programming, (Auto Channel
Search) as indicated on page 18.
1. Disconnect the antenna leads from the rear of the
TV.
Cable TV
Wall Jack
2. Identify the type of cable from your antenna. If it is a
round cable as illustrated, it is a 75 ohm coaxial
antenna cable. This cable will connect directly to the
jack marked ANT.IN on your DVD/VCR Receiver.
Back Panel of
Typical Cable Box
Tip
If your antenna lead wire is a flat type antenna cable,
connect it to an Antenna Adaptor (300-ohm to 75-ohm)
(not supplied) and slip the Adaptor onto the ANT.IN
jack. The Adaptor does not screw on to the DVD/VCR
Receiver, it just slips over the jack.
Antenna
Antenna
Cable TV
Wall Jack
Flat Wire
(300 ohm)
Rear of DVD/VCR Receiver
300/75 ohm
Adaptor
(Not supplied)
OR
OR
Rear of DVD/VCR Receiver
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Basic TV Connections
Optional TV Connections
Note
Make one of the following connections, depending on
the capabilities of your TV.
DVD playback can also be done using the S-VIDEO OUT
and COMPONENT/PROGRESSIVE SCAN VIDEO OUT
connection options below. The tuner and VCR ONLY
output through the RF.OUT (R) or DVD/VCR OUT (A,
V) jack. (See left)
RF coaxial connection
Connect the RF.OUT jack on the DVD/VCR Receiver to
the antenna in jack on the TV using the 75-ohm Coaxial
Cable supplied (R).
Note
S-Video Connection
If you use this connection, tune the TV to the
DVD/VCR Receiver’s RF output channel (CH 3 or 4).
1. Connect the S-VIDEO OUT jack on the DVD/VCR
Receiver to the S-Video in jack on the TV using the
S-Video cable (S).
How to set the DVD/VCR Receiver’s RF output chan-
nel
When the DVD/VCR Receiver is turned off, press and
2. Connect the Left and Right AUDIO OUT jacks on
the DVD/VCR Receiver to the audio left/right in
jacks on the TV using the supplied audio cables (A).
hold CH/PRESET (
/
) on the front panel for about
five seconds to change the RF output channel (CH 03
or CH 04). “RF-03” or “RF-04” appears in the display
window.
Component Video (ColorStream®) connection
1. Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the DVD/VCR Receiver to the
corresponding in jacks on the TV using Y Pb Pr
cables (C).
Audio/Video connection
1. Connect the DVD/VCR VIDEO OUT jack on the
DVD/VCR Receiver to the video in jack on the TV
using the supplied video cable (V).
2. Connect the Left and Right AUDIO OUT jacks of the
DVD/VCR Receiver to the audio left/right in jacks on
the TV (A) using the supplied audio cables.
2. Connect the Left and Right DVD/VCR AUDIO OUT
jacks on the DVD/VCR Receiver to the audio
left/right in jacks on the TV (A) using the supplied
audio cables.
Progressive Scan (ColorStreamPro®) connection
ꢀ If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD/VCR
Receiver’s progressive scan output for the highest
video resolution.
Note
If you use this connection, set the TV’s source selector
to VIDEO.
ꢀ If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD/VCR Receiver.
Rear of TV
ANTENNA
INPUT
COMPONENT/PROGRESSIVE
SCAN VIDEO INPUT
S-VIDEO
INPUT
VIDEO
INPUT
AUDIO INPUT
Y
Pr
Pb
R
L
L
1. Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the DVD/VCR Receiver to the
corresponding in jacks on the TV using Y Pb Pr
cable (C).
A
V
C
2. Connect the Left and Right AUDIO OUT jacks of the
DVD/VCR Receiver to the audio left/right in jacks on
the TV (A) using the supplied audio cables.
R
S
Notes
ꢀ Set the Progressive Scan to “On” on the DVD setup
menu for progressive signal, see page 21.
ꢀ Progressive scan does not work with the analog video
connections (yellow VIDEO OUT and S-VIDEO OUT
jack).
Rear of DVD/VCR Receiver
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Speaker System Connections
Speaker Positioning
For a normal setup use 6 speakers (2 front speakers,
Connect the speakers using the supplied speaker cords
by matching the colors of the terminals and those of the
cords. To obtain the best possible surround sound,
adjust the speaker parameters (distance, level, etc.).
center speaker, 2 rear speakers and subwoofer).
• Front Speakers
Based on your listening position, set up the speakers
at equal distance. And by hearing position, set up an
interval between speakers of 45 degree.
Notes
ꢀ Be sure to match the speaker cord to the appropriate
terminal on the components: 3 to 3 and # to #. If
the cords are reversed, the sound will be distorted
and lack bass.
ꢀ If you use front speakers with low maximum input rat-
ing, adjust the volume carefully to avoid excessive
volume output to the speakers.
• Center Speaker
It is ideal that the center speakers and front speakers
are same height. But normally place it above or below
the television as shown below.
• Rear Speakers
Place the rear surround speakers to the left and right
behind the primary listening area. These speakers
recreate sound motion and atmosphere required for
surround playback. For best results, do not install the
rear speakers too far behind the listening position,
install them at or above the level of the listener’s ears.
It is also effective to direct the rear speakers towards
a wall or ceiling to further disperse the sound.
In the case of a smaller room size, if the audience is
near to the rear wall set the rear speakers opposite
each other, and set the rear speakers 60 - 90 cm
above the listener’s ears.
ꢀ
Do not disassemble the front covers of supplied speakers.
Front Speaker
(Right)
Front Speaker
(Left)
Center
Speaker
• Subwoofer
This can be placed in any front position.
Center Speaker
Subwoofer
Front
Front
Speaker
(Left)
Speaker
(Right)
Rear
Rear
Speaker
(Left)
Speaker
(Right)
Rear speaker
(Right surround)
Rear speaker
(Left surround)
Speaker Positioning Example
Subwoofer
About Ferrite Core
Be sure to attach the ferrite core to
the speaker cables (for connecting to
this unit).
1
This ferrite core can reduce noises.
2
3
How to attach the ferrite core.
1 Push the stopper [a] of the ferrite core
to open.
2
3
Wind the Center and Subwoofer Speaker
cables once on the ferrite core.
Pass the others straight on the ferrite core.
Close the ferrite core until it clicks.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Radio Antenna Connections
Connect the supplied FM/AM antennas for radio listen-
Digital Device Connections
Connect the DIGITAL AUDIO IN (OPTICAL) jacks on
the DVD/VCR Receiver to the digital audio out (optical)
jacks on your digital device (Game device, Digital Set
Top Box, etc.), using optional optical audio cable.
To select source of DVD/VCR Receiver to OPTICAL IN,
press AUX on the remote control.
ing.
1. Connect the AM loop antenna to the AM antenna
connectors.
2. Connect the FM wire antenna to the FM antenna
connectors.
Notes
ꢀ If the audio format of the digital output does not
match the capabilities of your DVD/VCR Receiver, the
DVD/VCR Receiver will produce a strong, distorted
sound or no sound at all.
Notes
ꢀ To prevent noise pickup, keep the AM loop antenna
away from the DVD/VCR Receiver and other compo-
nents.
ꢀ The Optical input function is available only when the
other unit’s Sampling Frequency is 32 - 48kHz.
ꢀ Be sure to fully extend the FM wire antenna.
ꢀ After connecting the FM wire antenna, keep it as hori-
zontal as possible.
Game Device
Digital Set Top Box
AM loop antenna (supplied)
OR
Rear of DVD/VCR Receiver
Accessory Audio/Video (A/V)
Connections to DVD/VCR
Receiver
Rear of DVD/VCR Receiver
Connect the VCR IN LINE1 or LINE in 2 jacks on the
DVD/VCR Receiver to the audio/video out jacks on your
accessory component, using optional audio/video
cables.
AUDIO
OUTPUT
R
L
VIDEO
OUTPUT
OR
Front of DVD/VCR Receiver
Rear of DVD/VCR Receiver
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Input/Output Source
Follow these guidelines to select and switch among the
various DVD/VCR Receiver input and output sources:
AUX
DVD/CD
VCR
FM/AM
• DVD/CD
To view output from the DVD deck:
Press DVD/CD on the remote or DVD/VCR on the
front panel until the DVD indicator on the front panel
lights and output from the DVD deck is viewed on the
TV screen.
• VCR
To view output from the VCR deck:
INPUT
Press VCR on the remote or DVD/VCR on the front
panel until the VCR indicator on the front panel lights
and output from the VCR deck is viewed on the TV
screen.
• FM/AM
To listen to AM/FM radio broadcasts:
Press FM/AM on the remote to toggle between AM
and FM radio. The selected frequency appears on
the front panel display.
• AUX
To listen to an audio source connected to the
DIGITAL AUDIO IN (OPTICAL) jack with video
from LINE 1:
Press AUX on the remote control once. L1 OPT will
appear on the front panel display. Audio will come
from an external source connected to the DIGITAL
AUDIO IN (OPTICAL) jack and video will come from
an external source connected to the VIDEO IN jack
of LINE 1 (for rear panel).
To listen to an audio source connected to the
AUDIO IN jack of LINE1 with video from LINE 1:
Press AUX on the remote control a second time.
L1 will appear on the front panel display. Audio will
come from an external source connected to the
AUDIO IN jacks of LINE1 (for rear panel) and video
will come from an external source connected to the
VIDEO IN jack of LINE 1 (for rear panel).
• INPUT
To view a source connected to the front or rear
LINE inputs:
First, press VCR to select the VCR deck, and then
press INPUT to select LINE1 (L1) (for rear panel) or
LINE2 (L2) (for front panel).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation - Sound Mode Descriptions
BYPASS
Mini Glossary for Audio Stream &
Software with multichannel surround audio signals is played
Surround mode
according to the way it was recorded.
(DTS)
Sound Mode
You can enjoy surround sound simply by selecting one
of the pre-programmed sound fields according to the
program you want to listen to.
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
means identical to the original masters) and results in excep-
tional clarity throughout a true 360 degree sound field. The
term DTS is a trademark of DTS Technology, LLC.
Press SOUND MODE repeatedly until the sound mode
you want appears in the display window as below.
Manufactured under license from DTS Technology, LLC.
Each time you press SOUND MODE button, the sound
mode is changed in the following order;
(Dolby Digital)
BYPASS → PRO LOGIC → MOVIE → MUSIC → MATRIX →
3D SURR
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital pro-
gram source. If you play DVDs with “
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
” mark, you can
When DVD is inserted.
You can change the sound mode of DVD (Dolby Digital, DTS,
PCM, etc) by pressing the AUDIO button on the remote
during playback.
(Dolby Pro Logic)
Although the DVD contents differ from disc to disc, the follow-
ing explains the basic operation when this feature is used.
Use this mode when playing movie or Dolby Digital 2 channel
which carries the “
” mark. This mode provides the effect
Each time you press AUDIO button, the sound mode of DVD is
changed as the following order;
of being in a movie theater or live concert house-an effect with
an intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynam-
ic than before.
→
→
→
Note
Depending on discs format, you may not be able to change the
sound mode.
(Dolby Pro Logic II)
Dolby Pro Logic II creates five full-bandwidth output channels
from two-channel sources. This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds or tonal colorations.
For your reference
•
The DVD/VCR Receiver memorizes the last mode
settings for each source individually.
•
You can identify the encoding format of program
software by looking at its packaging.
MOVIE mode:
The Movie mode is for use with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
- Dolby Digital discs are labelled with the
- Dolby Surround encoded programs are labelled with
logo.
the
logo.
MUSIC mode:
- DTS Digital Surround discs are marked with
.
The Music mode is for use with any stereo music recordings, and
provides a wide and deep sound space. The Music mode
includes controls that allow the sound to be tailored to individual
listening tastes.
Note
When you play sound tracks with 96kHz sampling frequency,
the output signals will be converted to 48kHz (sampling
frequency).
MATRIX mode:
The Matrix mode is the same as the Music mode except that the
directional enhancement logic is turned off. It may be used to
enhance mono signals by making them seem “larger.” The Matrix
mode may also find use in auto systems, where the fluctuations
from poor FM stereo reception can otherwise cause disturbing
surround signals from a logic decoder. The ultimate “cure” for
poor FM stereo reception may be simply to force the audio to
mono.
Volume Control
You can adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME (v/V) on the
remote control repeatedly.
3D SURROUND
Muting
This unit can produce a 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio play-
back from two conventional stereo speakers instead of the five
or more speakers normally required to listen to multi-channel
audio from a home theater. This feature works with DVD discs
encoded with Dolby Pro Logic and Dolby Digital audio tracks.
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, “MUTE” indicator in the display window
will light up. To exit mute mode, press MUTE again.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation Setup
EASY INFORMATION
On-Screen Display (OSD)
Set the Output Source to VCR as shown in “Selecting
the Input/Output Source” on page 15.
If the Extended Data Service (XDS) signals are provided
along with normal TV signal in your area or during play-
back of a tape recorded with Extended Data Service
(XDS) signals, the station ID, program title, and program
details are shown on the TV screen.
Some of these functions appear during VCR operated.
When viewing a channel with Extended Data Service (XDS)
signals, press ENTER and the station ID will appear on the
TV screen. Press ENTER again and the program details will
appear on the TV screen.
❶
❷
❸
❹
❺
PLAY
SP
HI-FI
CH 4
STEREO
When viewing a tape recorded with Extended Data
Service (XDS) signals, press ENTER twice and the pro-
gram title and program details will appear on the TV
screen.
OCT 8 , SAT
2:15 PM
PROGRAM DETAILS
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are not
applicable to this program.
❻
❼
❶ TAPE SPEED DISPLAY
Shows the current tape speed.
❷ FUNCTION DISPLAY
Indicates the current function.
❸ HI-FI DISPLAY
Indicates the unit is playing back tape recorded in Hi-Fi.
CH 4
WABC STEREO
PROGRAM DETAILS
“Home video”
SP
❹ CHANNEL DISPLAY
I
ndicates the selected channel (or LINE1(L1), LINE2(L2)).
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
❺ STEREO/SAP DISPLAY (MONO is not displayed)
Shows the type of audio signal received by the VCR tuner.
❻ DATE DISPLAY
“Home video”
OCT 8 , SAT
2:15 PM
Shows the current date. (Month/Date/Day of the week
format)
Easy Information Screen
(Program details)
Easy Information Screen
(Station ID)
❼ CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, the tape counter and remaining time
on the tape.
On-Screen Menus Setup
The SETUP, clock setting (CLOCK), and timer
recordings (PROGRAM) are accessed conveniently with
the on-screen menus, that lead you through each step.
The following pages describe the on-screen menu
selections available.
Each press of the ENTER changes the TV
on-screen displays in the following sequence.
STOP
SP
CH
STEREO
4
Menu Selection
Your VCR allows remote control adjustment of several
features.
OCT 8 , SAT
2:15 PM
1. Press MENU and the MAIN menu will appear.
2:15 PM
0:35:40
2. Select the desired menu with v/V button and
then press ENTER.
REM 1:58
Note
Menus remain on-screen for 3 minutes.
Notes
MAIN MENU
ꢀ The function displays remain on the TV screen for 5
seconds.
CLOCK SET (page 19)
PROGRAM (page 25)
TUNING (page 18)
SETUP (page 18)
ꢀ The clock (or tape counter, tape remaining) mode will remain
on the screen until you press ENTER.
ꢀ The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remaining
tape length indicator appears after any tape operation.
3. Press MENU when finished.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation Setup (Continued)
VCR Setup Menu Options
Channel Selection
This DVD/VCR Receiver is equipped with a
1. Press MENU and the MAIN menu will appear.
frequency synthesized tuner capable of receiving up to
181 channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
2. Use v/V to select the SETUP menu, then press
ENTER.
The SETUP menu will appear.
Preparation:
Connect the DVD/VCR Receiver to the desired type of antenna
or cable TV system, as shown in Connecting Antenna/Cable
TV to DVD/VCR Receiver on page 11.
AUTO CHANNEL PROGRAMMING
1. Press MENU and the MAIN menu will appear.
2. Use v/V to select the TUNING menu, then press
ENTER.
3. Use v/V to choose a desired option on the
SETUP menu. Then use b/B to choose a desired
setting.
The TUNING menu will appear.
FUNCTION OSD
The on-screen display of this DVD/VCR Receiver can be turned
on or off.
ꢀ FUNCTION OSD can be switched between ON and OFF
using b/B.
AUDIO MODE
The DVD/VCR Receiver has two separate audio playback sys-
tems, the high quality VHS Hi-Fi system and standard NOR-
MAL mono system. The same audio is generally recorded on
both systems. The VHS Hi-Fi system plays on separate (left
and right) channels, and the NORMAL system plays monaural
sound. The normal track is always played so the cassette can
be played on a DVD/VCR Receiver that does not have VHS
Hi-Fi.
3. Use V to choose the SOURCE SELECT option,
then use b/B to select TUNER.
Press b/B repeatedly to switch between TUNER,
LINE1(L1) and LINE2(L2).
4. Use v/V to choose the AUTO CHANNEL SET option,
then use b/B to search for channels.
ꢀ AUDIO MODE can be switched between HI-FI and
NORMAL using b/B.
The tuner will automatically cycle through all
available channels in the area and place them in the
tuner’s memory.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display to
the desired position when both MTS stereo and SAP signals are
received. When only one of the MTS signal is received, the
DVD/VCR Receiver automatically selects the corresponding
receiving mode (Stereo or SAP) regardless of the selected posi-
tion. For normal operation, the display should be in the STEREO
position. The DVD/VCR Receiver will then record a STEREO pro-
gram when available, and record a mono program IF the program is
NOT IN STEREO.
5. After the AUTO CHANNEL SET PROCEEDING is
complete, make sure the TUNING BAND is set
appropriately (TV or CATV) using v/V and
choosing the correct TUNING BAND (TV or
CATV) by using b/B while in the TUNING menu.
Remember, TV is for the air antenna reception,
CATV is for cable or wireless cable connection.
For weak STEREO and/or SAP broadcasts, changing the dis-
play to mono may give clearer sound.
6. Press MENU to return to the TV screen.
ꢀ BROADCAST TYPE can be switched between STEREO,
SAP, and MONO using b/B.
7. Use CH/TRK (v/V) on the remote control or
CH/PRESET (
/
) on the front panel to cycle
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
the DVD/VCR Receiver through the channels in
Used during playback [when AUDIO MODE (HI-FI/NORMAL) is
in HI-FI position] for selecting the audio output signals from the
AUDIO OUT terminals (L ch and R ch), and RF.OUT.
This display setting should normally be left in the stereo posi-
tion, so that when a stereo tape is played, the stereo sound will
be heard through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
ꢀ AUDIO OUTPUT can be switched between STEREO, LEFT,
and RIGHT using b/B.
memory.
TO ADD OR ERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels in
memory manually.
1
Press V to choose the CH. ADD/DEL option on the
TUNING menu. Use b/B to select a channel to add
or erase.
4. Press MENU when finished.
2
3
Press ENTER to add or erase the channel.
Repeat steps 1 and 2 to add or erase channels.
Press MENU to return to the TV screen.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation Setup (Continued)
Setting the Clock
The DVD/VCR Receiver gives you two ways to set the
time and date: the Auto Clock Feature or manually. The
Auto Clock feature enables the DVD/VCR Receiver to
set up the clock while the DVD/VCR Receiver is turned
off.
Note
There are cases where the TV station does not send or sends
the wrong time. Therefore, the incorrect time will be set. If this
happens we recommend that you set the clock manually.
Manual Clock Set
Things to know before starting
The clock uses the 12-hour system. (Be sure to set AM
1. Press MENU and the MAIN menu will appear.
ꢀ
2. Use v/V to choose the CLOCK menu.
and PM correctly.)
Press ENTER and the CLOCK menu will appear.
ꢀ
The initial Clock Setting is JANUARY 1, 2005, 12:00 AM.
Auto Clock Set
The Auto Clock Set feature is set to ON at the factory. In the
ON setting, the DVD/VCR Receiver looks for a channel carry-
ing XDS (Extended Data Services) information. XDS updates
the clock using the Coordinated Universal Time.
The Auto Clock feature enables the DVD/VCR Receiver
to set up the clock while the DVD/VCR Receiver is
turned off.
3. Use b/B to choose the month.
4. Use V to choose the DAY option.
Use b/B to choose the date.
The day of the week will display automatically.
1. Press MENU and the MAIN menu will appear.
2. Use v/V to choose the CLOCK menu.
5. Use V to choose the YEAR option.
Press ENTER and the CLOCK menu will appear.
Use b/B to choose the year.
6. Use V to choose the TIME option.
Use b/B to choose the time.
Press and hold b/B to advance clock
continuously.
7. Use E to choose the DAYLIGHT SAVINGS option.
Use F or G to choose AUTO, ON, or OFF.
If you choose AUTO, the VCR sets the clock using the
DST information broadcast in the signal (channel).
If you choose ON, the VCR adjusts the clock for Daylight
Saving Time automatically.
3. Use V to choose the AUTO CLOCK SET option.
Use b/B to choose ON.
4. Use E to choose the DAYLIGHT SAVINGS option.
Use F or G to choose AUTO, ON, or OFF.
If you choose AUTO, the DVD/VCR Receiver sets the
clock using the DST information broadcast in the signal
(channel). If you choose ON, the DVD/VCR Receiver
adjusts the clock for Daylight Saving Time automatically.
5. Use E to choose the TIME ZONE option.
Use F or G to choose the correct time zone
(AUTO, EASTERN, CENTRAL, MOUNTAIN,
8. Press MENU when finished.
PACIFIC, ALASKA or HAWAII).
Note
If “AUTO” is selected as the time zone, the DVD/VCR
Receiver sets the clock using the first Coordinated
Universal Time information it finds in a broadcast signal.
If setting the clock manually, “AUTO CLOCK SET” must
set to “OFF”.
If set to “ON”, an incorrect date and/or time will be
entered again when the DVD/VCR Receiver is turned
off.
6. Press MENU when finished.
7. Turn off the DVD/VCR Receiver and the auto
clock set feature sets the time.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation Setup
General Explanation
Temporary Feedback Field Icons
This manual gives basic instructions for operating the
DVD/VCR Receiver. Some DVDs require specific opera-
tion or allow only limited operation during playback.
TITLE
Repeat Title
CHAPT
Repeat Chapter
When this occurs, the symbol
appears on the TV
TRACK
Repeat Track (non-PBC Video CDs
screen, indicating that the operation is not permitted by
the DVD/VCR Receiver or is not available on the disc.
and Audio CD only)
ALL
Repeat Disc (non-PBC Video CDs
and Audio CD only)
On-Screen Display
Set the Output Source to DVD as shown in “Selecting
the Input/Output Source” on page 15.
A
B
Repeat A-B
OFF
Repeat Off
Resume play from this point
Action prohibited or not available
General playback status can be displayed on the TV
screen. Some items can be changed on the menu.
Notes
On-screen display operation
ꢀ Some discs may not provide all of the features on the
on-screen display example shown below.
ꢀ If no button is pressed for 10 seconds, the on-screen
display disappears.
1. Press DISPLAY during playback.
2. Press 3/4to select an item.
The selected item will be highlighted.
3. Press 1/2to change the setting of an item.
The number buttons can be also used for setting
numbers (e.g., title number). For some functions,
press ENTER to execute the setting.
DVD
Items
Function (Press 3/4to select desired item)
Selection Method
Title Number
Shows the current title number and total number of
titles, and skips to the desired title number.
1
/
2
, or Numbers,
ENTER
1/3
1/12
-:--:--
Chapter Number
Time search
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
1
/
2
, or Numbers,
ENTER
Shows the elapsed playing time, and
searches the point directly from the elapsed time.
Numbers, ENTER
, or
Audio language
and Digital Audio
Output mode
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1
ENG
D
5.1 CH
1
/
2
AUDIO
Subtitle language
Shows the current subtitles language, and
changes the setting.
1 2
, or
SUBTITLE
/
OFF
Angle
Shows the current angle number and total number of
angles, and changes the angle number.
1
/
2
, or
1/1
ANGLE
Sound
Shows the current sound mode, and
changes the setting.
1
/
2
, or
BYPASS
SOUND MODE
VCD1.1
VCD2.0
Items
Function (Press 3/4to select desired item)
Selection Method
Track Number
Shows the PBC On mode or current track number, total
number of tracks and skips to the desired track number.
1
/
2
, or Numbers,
ENTER
1/4
Time
Shows the elapsed playing time (Display only)
–
0:16:57
Audio Channel
Shows the audio channel, and
changes the audio channel.
1
/
2
, or
STER.
AUDIO
Shows the current sound mode, and
changes the setting.
Sound
1
/
2
, or
BYPASS
SOUND MODE
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation Setup (Continued)
Initial Settings
Picture
You can set your personal preferences on the DVD/VCR
Receiver.
TV Aspect DVD
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays pictures with masking bars above and
below the picture.
General Operation
1. Press SETUP.
4:3 Panscan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
The Setup menu appears.
Original
English
Disc Audio
Disc Subtitle
Disc Menu
Rating
16:9 Wide: Select when a 16:9 wide TV is connected.
French
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Disc Subtitle
Disc Menu
Rating
German
Spanish
Italian
Area Code
TV Aspect
Menu Language
Chinese
Polish
Area Code
TV Aspect
Progressive Scan
Hungarian
Other — — — —
Menu Language
5.1 Speaker Setup
Others
Progressive Scan
5.1 Speaker Setup
Others
2. Use v/V to select the desired option.
The screen will show the current setting for the
selected option, as well as alternate setting(s).
Progressive Scan DVD
Progressive Scan Video provides the highest resolution
pictures with less flicker and line structure.
3. While the desired option is selected, press B,
then v/V to select the desired setting.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
DVD/VCR Receiver to a standard (analog) television,
set Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
4. Press ENTER to confirm your selection.
Some options require additional steps.
5. Press SETUP, RETURN, or PLAY to exit the setup
menu.
Language
Off
On
Disc Audio
Disc Subtitle
Disc Menu
Disc Language DVD
Select a language for the disc’s Menu, Audio, and
Subtitle features.
Original : The original language set for the disc is selected.
Other : To select another language, use number buttons to
enter the corresponding 4-digit number according to the
language code list on page 44. If you enter the wrong
language code, press CLEAR.
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Note
Disc Language selection may not work for some DVDs.
Original
English
Disc Audio
Disc Subtitle
Disc Menu
Rating
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
French
German
Spanish
Italian
Area Code
TV Aspect
1) Remove any disc from the unit and close the disc
tray. See that “NO DISC” is displayed on the display
window.
2) Press STOP (9) and hold it for more then five
seconds before releasing it. The video output will be
restored to the standard setting and a picture will
once again be visible on a conventional analog TV or
monitor.
Menu Language
Chinese
Polish
Progressive Scan
Hungarian
Other — — — —
5.1 Speaker Setup
Others
Menu Language
Select a language for the VCR and DVD Setup menu.
This is the menu you see when you press SETUP.
English
Spanish
French
Disc Audio
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation Setup (Continued)
Speaker setup
DVD
Auto Play
You can set up the DVD/VCR Receiver so a DVD disc
automatically starts playing whenever the DVD is insert-
ed.
If Auto Play mode is set to On, this DVD/VCR Receiver
will search a title where playback time is longest and
then play back the title automatically.
5.1 Speaker settings DVD
Select speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog Multi-
Channel Output. (See “Speaker Setup”, page 37.)
On: Auto Play function is activated.
Disc Audio
Off: Auto Play function is not activated.
Disc Subtitle
R
R
Disc Menu
Rating
Note
Front
L
Volume
Size
0 dB
Small
1 ft
The Auto Play function may not work for some DVDs.
Area Code
TV Aspect
Distance
Test
Menu Language
Progressive Scan
B.L.E. (Black Level Expansion)
Return
VCD2.0
VCD1.1
DVD
5.1 Speaker Setup
Others
To select the black level of playback pictures. Set your
preference and monitor’s ability.
Others
On: Expanded grey scale. (0 IRE cut off)
The DRC, Vocal, PBC, Auto Play, B.L.E., Pluge and
DNR settings can be changed.
Off: Standard grey scale. (7.5 IRE cut off)
ꢀ Use 3/4to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
Pluge (Blacker than Black) DVD
For proper adjustment of your television brightness
settings utilizing a commercially available test disc.
Disc Audio
Disc Subtitle
Disc Menu
Rating
On: Select when you adjust the level of your TV using a
commercially available test disc that contains pluge sig-
nals.
Area Code
TV Aspect
Off: For normal use.
Menu Language
Progressive Scan
DNR (Digital Noise Reduction)
VCD2.0
VCD1.1
DVD
5.1 Speaker Setup
Others
You can reduce ambient noise in the picture.
DNR1: Normal level
Dynamic Range Control (DRC) DVD
DNR2: Expanded level.
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
Off:
Off.
Notes
ꢀ Actual picture enhancement may vary depending on the
quality of the disc.
ꢀ While the DNR2 (expanded level) can provide additional
improvement in the reduction of noise in the video signal, it
may produce undesirable picture artifacts on some discs.
Should this occur, select a more appropriate DNR level (nor-
mal or off).
Vocal DVD
ꢀ Depending on the disc, some picture detail may be lost by
the picture enhancement.
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
VCD2.0
VCD1.1
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio
CDs.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation Setup (Continued)
Parental Control
DVD
Area Code
Rating DVD
Enter the code of a area whose standards were used to
rate the DVD video disc, referring to the list (See “Area
Code List”, page 45).
Movies on DVDs may contain scenes not suitable for chil-
dren. Therefore, discs may contain Parental Control infor-
mation that applies to the complete disc or to certain
scenes on the disc. These scenes are rated from 1 to 8,
and alternatively, more suitable scenes are available for
selection on some discs. Ratings are area dependent.
DVD video discs may or may not respond to the parental
control setting if the Area code of the disc is set wrongly.
The Parental Control feature allows you to prevent discs
from being played by your children or to have certain discs
played with alternative scenes.
Code Set
Disc Audio
Disc Subtitle
Disc Menu
Rating
U
S
Area Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
8
Disc Audio
Disc Subtitle
Disc Menu
Rating
7
6
1. Select Area Code using the v/V buttons on the
5
setup menu.
Area Code
TV Aspect
4
3
2. While Area Code is selected, press B.
3. Follow step 3 of “Rating” on left.
Menu Language
2
Progressive Scan
1
Unlock
Change
5.1 Speaker Setup
Others
4. Select the first character using the v/V buttons.
5. Press 2 to shift to second character and select
1. Select Rating on the Setup menu using v/V
the second character using v/V buttons.
buttons in stop mode.
6. Press ENTER to confirm your Area code
selection, then press SETUP to exit the menu.
2. While Rating is selected, press B.
3. When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
tons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify.
Note
Confirmation of the 4-digit password is necessary when
the password is changed (see Changing the 4-digit
password below ).
When you have already entered a password;
Enter a 4-digit password using the numerical
buttons to confirm the personal 4-digit security pass-
word, then press ENTER.
Changing the 4-digit password
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old password, then press ENTER.
3 Select Change using v/V buttons then press
ENTER.
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
4. Select a rating from 1 to 8 using v/V buttons.
One (1) has the most playback restrictions. Eight
(8) has the least playback restrictions.
The limitation will be more severe as the level
number decreases.
4 Enter the new 4-digit password, then press
ENTER.
5 Enter exactly the same password a second time and
verify by pressing ENTER.
6 Press SETUP to exit the menu.
Unlock: If you select Unlock, Parental Control is not
active. The disc will play in full.
If you forget your 4-digit password
Ratings 1 to 8: Some discs contain scenes not suit-
able for children. If you set a rating for the DVD, all
disc scenes with the same rating or lower will be
played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found, play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
If you forget your password, to clear the current pass-
word follow the procedure below.
1 Press SETUP to display the setup menu.
2 Enter the 6-digit number 210499.
The 4-digit password is cleared.
3 Enter a new password as shown above to the left
(Rating).
5. Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
6. Press OPEN/CLOSE to activate the Parental
Control. If the rating set is lower than the disc
rating, a message will appear. Select “YES” if
you want to continue playback and input the
password followed by ENTER.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation
Normal Playback
Special Effect Playbacks
Preparation:
Special effects playback notes
ꢀ Turn on the TV.
ꢀ Horizontal lines (noise bars) will appear on the TV screen.
This is normal.
ꢀ The audio is automatically muted during special effect modes,
so there is no sound during search.
ꢀ During high-speed picture search mode, a short period is
needed to stabilize tape speed when re-entering the PLAY
mode. Slight interference may be observed during this period.
ꢀ Tune the TV to the DVD/VCR Receiver output channel (CH
3 or 4) or set the TV’s source selector to VIDEO.
ꢀ If a direct VIDEO/AUDIO connection is made between the
DVD/VCR Receiver and the TV, set the TV’s source selector
to VIDEO.
ꢀ Set the Output Source to VCR as shown in “Selecting the
Input/Output Source” on page 15.
Search
1. Insert a prerecorded video cassette.
This function lets you quickly and visually search for a
desired tape section in either direction: forward or
reverse.
The
indicator will light and the DVD/VCR Receiver
will power-up automatically.
ꢀ Make sure that the
window is not lighted. If it is, press POWER once.
indicator in the display
1 Press REW (m) or FWD (M) during playback. The
DVD/VCR Receiver will be activated in the SEARCH
mode.
ꢀ If a tape without a safety tab is inserted, the unit will
2 To return to playback, press PLAY.
start playback automatically.
2. Press PLAY once.
Still Picture and Frame-by-Frame
Playback
1 Press PAUSE/STEP during playback.
Still picture will appear on the TV screen.
PLAY appears on the TV screen .
ꢀ It is not necessary to select the tape speed for
playback. It will be automatically selected by the
DVD/VCR Receiver.
ꢀ If a still picture vibrates vertically, stabilize it using
ꢀ In playback, the TV/VCR selector switches to VCR
CH/TRK(v/V) on the remote control.
mode automatically.
ꢀ If the DVD/VCR Receiver is left in the STILL mode for
more than 5 minutes, the DVD/VCR Receiver will auto-
matically enter the STOP mode to protect the tape and
video heads.
3. Press STOP to stop playback.
STOP appears on the TV screen.
ꢀ If the tape reaches the end before STOP is pressed, the
DVD/VCR Receiver will automatically stop, rewind and
eject the tape, and it will turn itself off.
2 Press PAUSE/STEP repeatedly to advance the
video picture one frame at a time while viewing a still
picture.
Tracking Control
3 To return to playback, press PLAY.
Auto Tracking
Slow Motion
1 Press SLOW.
The automatic tracking function adjusts the picture to
remove snow or streaks.
The tape will be played back at a speed 1/19 times
slower than the normal speed.
The AUTO TRACKING function works in the following
cases:
ꢀ During slow playback, use CH/TRK (v/V) on the Remote
Control to minimize noise bands.
ꢀ A tape is played back for the first time.
ꢀ Tape speed (SP, SLP) changes.
ꢀ If slow motion mode continues for more than 3 minutes,
the DVD/VCR Receiver will automatically change to play-
back mode.
ꢀ Streaks or snow appear because of scratches on the tape.
Manual Tracking
2 To return to playback, press PLAY.
If noise appears on the screen during playback, press
either CH/TRK (v/V) on the remote control or CH/PRE-
SET (
screen is reduced.
/
) on the front panel until the noise on the
Variable playback speed control
During Playback use b/B, you can reach the follow-
ing playback speeds.
(-7xplay (REV), -3xplay (-3PLY), -play (-PLAY), still
(STILL), 1/19 slow (SLOW), play (PLAY), 2xplay (2PLY),
7xplay(CUE)).
During slow motion and shuttle, the noise bars may
appear on the picture according to the status of tape.
If distortions can be seen in the picture, reduce them
with CH/TRK (v/V) on the remote control.
ꢀ If vertical jitter is present, adjust tracking controls very
carefully.
ꢀ Tracking is automatically reset to normal when the tape is
ejected or the power cord is unplugged for more than 3
seconds.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation (Continued)
Normal Recording
Timer Recording
Preparation:
This DVD/VCR Receiver can be programmed to record
up to 8 programs within a period of 1 year. For unattend-
ed recording, the timer needs to know the channels to be
recorded and the starting and ending times.
ꢀ Turn on the power of both the DVD/VCR Receiver and TV.
ꢀ Tune the TV to the DVD/VCR Receiver output channel (CH 3
or 4) or set the TV’s source selector to VIDEO.
ꢀ If a direct VIDEO/AUDIO connection is made between the
DVD/VCR Receiver and the TV, set the TV’s source selector
to VIDEO.
Things to know before starting
ꢀ
If you try to set the program timer before setting the clock,
ꢀ The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materials,
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and/or
criminal liability.
PLEASE SET THE CLOCK appears for a moment and
then CLOCK menu appears on the TV screen. Set the time
and date before proceeding.
Make sure a tape is in the DVD/VCR Receiver and the
safety tab is in place or the tape will be automatically
ejected.
ꢀ
1. Insert a video cassette with the safety tab intact.
Preparation:
2. Select the desired channel with CH/TRK (v/V) or
ꢀ Turn on the power of both the DVD/VCR Receiver and the
TV.
number (0-9) buttons.
If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select LINE1(L1)
or LINE2(L2) with INPUT.
ꢀ
Be sure the TV is set to the DVD/VCR Receiver output channel
(CH3 or CH4).
ꢀ Make sure the TUNING BAND in the TUNING menu is set
appropriately (TV or CATV).
3. Set the desired recording speed (SP or SLP) with
the SP/SLP button.
1. Press MENU and the MAIN menu will appear.
4. Set the MTS mode as desired (See page 18, 28).
2. Use v/V to choose the PROGRAM menu.
5. Press REC/ITR (z) once.
3. Press ENTER to go to the PROGRAM menu.
Recording will start. (The REC indicator will light in
the display window.)
The PROGRAM menu will appear.
ꢀ If all 8 programs have been entered, FULLY
PROGRAMMED message will appear for a moment
and then PROGRAM 1 will appear on the TV screen.
ꢀ REC indicator appears only when the Output Source is
set to VCR.
ꢀ If a cassette with no safety tab is loaded, the cassette
will be ejected automatically.
6. Press STOP to stop recording.
If the tape reaches the end before STOP is pressed, the
DVD/VCR Receiver will automatically stop, rewind, eject
the tape and turn itself off.
4. Use b/B to choose the PROGRAM No. (1-8).
To pause recording
5. Use V to choose the MONTH option.
1 Press PAUSE/STEP to pause the tape during
recording.
Use b/B to choose the desired month.
6. Use V to choose the DAY option.
The REC indicator will flash in the display window.
Use b/B to choose the desired day.
2 When you want to continue recording, press
PAUSE/STEP or REC/ITR (z).
ꢀ After 5 minutes in Pause mode, the tape will be stopped
automatically to protect the tape and the video heads.
7. Use V to choose the START option.
Use b/B to choose the desired start time.
8. Use V to choose the STOP option.
Use b/B to choose the desired stop time.
To record one TV program while
watching another
1 Use TV/VCR to select the TV mode during recording.
“TV” appears in the display window.
9. Use V to choose the CHANNEL option.
Use b/B to choose the desired channel
(Channel, LINE1(L1) or LINE2(L2)).
2 Using the TV, select the channel to be viewed.
Cable Users: If you have CABLE TV and used Cable Box
in Connecting Antenna/Cable TV to DVD/VCR Receiver
(page 11), using a cable box converter, you must set the
channel in this step to match the cable box output channel
(usually CH 3 or 4). Change channels on the cable box
instead of with the DVD/VCR Receiver.
Tips
Always use PAUSE/STEP for best results when making
changes during recording.
For example: To change channels during recording, first press
PAUSE/STEP to put the unit in pause mode. Select the desired
channel on the DVD/VCR Receiver, then press PAUSE/STEP
again to resume recording.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation (Continued)
Notes
10. Use V to choose the SPEED option.
Use b/B to choose the desired recording speed
(AUTO, SP or SLP).
ꢀ If the power fails or the DVD/VCR Receiver is unplugged
from the AC outlet, the correct clock time and timer settings
are kept in memory for approximately 3 seconds. After 3
seconds, the clock and program timer must be reset when
power is restored. Reset the clock according to instructions.
AUTO mode determines how much tape is left and switch-
es speed from SP to SLP, if necessary, to complete record-
ing the program. There will be some picture and sound dis-
tortion at the point of the speed change.
ꢀ After setting up a timer recording, recording will start if no
other timer recordings are scheduled to occur at the same
time (see “Program Priority” at right).
11. Use V to choose the REPEAT option.
Use b/B to choose the desired repeat (ONCE,
WEEKLY or DAILY).
ꢀ The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materials,
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and/or
criminal liability.
ONCE event....for recording up to 8 programs on a single
day or over the days within a period of 1 year.
WEEKLY event....for recording up to 8 programs on a cer-
tain day of every week.
Checking (Erasing) Timer Record
Programming
Programming can be checked whenever the DVD/VCR
Receiver is turned on.
DAILY event....for recording up to 8 programs at the same
time(s) Monday through Friday.
1 Press MENU and the MAIN menu will appear.
2 Use v/V to choose the PROGRAM menu.
Press ENTER and the PROGRAM menu will appear.
Tip
If the input data is wrong, use v to select the data and cor-
rect it using b/B.
3 Use b/B to select a program you want to check or
erase. If you want to erase the program, press
CLEAR.
12. Press MENU, the program will be memorized by
the DVD/VCR Receiver.
4 Press MENU to return to the TV screen.
ꢀ
indicator lights in the display window.
ꢀ If the program preset time has past, the PAST TIME
PROGRAMMED message will appear on the TV screen.
Return to the incorrect program and program it with the
correct time.
ꢀ If you had entered a past date, timer recording will be
performed on that date of the next year.
ꢀ Additional programs may be entered by repeating steps
1-12.
Program Priority
If the starting and ending times of two or more timer
recordings overlap on the
same day, priority is given to
the earliest recording. For
example, in the diagram at
left PROGRAM 2 will not be
recorded until PROGRAM 1
is finished. The first part of
Cable Users: If your cable hookup is via a TV
converter box, you can program multiple recordings only on
the converter box output channel. This is because the con-
verter determines what channel you view through your
DVD/VCR Receiver.
PROGRAM 2 will not be recorded. Likewise, PRO-
GRAM 3 will not be recorded until PROGRAM 2 is fin-
ished, and so on.
Tip
If you have finished programming and you want to set the
DVD/VCR Receiver to record the programs you have entered,
MAKE SURE YOU HAVE INSERTED A TAPE INTO THE
DVD/VCR Receiver. The DVD/VCR Receiver is now set to
record the preset programs.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation (Continued)
Instant Timer Recording
Dubbing and Editing
Instant Timer Recording allows you to make a recording
easily of a preset length without using the programma-
ble timer.
If you wish to edit or dub your camcorder (or another
VCR) recordings to this DVD/VCR Receiver, the rear
(or Front) panel mounted Audio and Video (A/V) input
jacks make the connections quick and easy. These
direct A/V jacks will also provide better picture results
than using the RF jack on the rear panel.
Preparation:
ꢀ Turn on the power of both the DVD/VCR Receiver and the TV.
ꢀ Be sure the TV is tuned to the DVD/VCR Receiver output channel
(CH3 or 4).
1. Connect the camcorder’s (or another VCR’s) A/V
outputs to your DVD/VCR Receiver as illustrated on
page 14.
ꢀ If a direct VIDEO/AUDIO connection is made between the
DVD/VCR Receiver and the TV, set the TV’s source selector to
VIDEO.
2. Select the input channel “LINE2” (Use INPUT to
select LINE2(L2)).
1. Insert a video cassette with the safety tab intact.
2. Select the desired channel with CH/TRK (v/V) or
number (0-9) buttons.
If you have connected your DVD/VCR Receiver to the A/V
input jacks on the rear of DVD/VCR Receiver, you should
select the input channel LINE1(L1) by pressing INPUT
twice.
The channel number appears on the TV screen.
ꢀ If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select
LINE1(L1) or LINE2(L2).
3. Play the tape in the camcorder (or another VCR).
If you have a TV attached to your DVD/VCR
Receiver, you can see the video playing.
3. Select the desired recording speed (SP or SLP)
with the SP/SLP button.
4. When you desire the recording to begin, press
DVD/VCR Receiver’s REC/ITR (z) once to start.
You can stop the recording by pressing STOP.
The tape speed will appear on the TV screen.
4. Press REC/ITR (z) twice.
The menu as illustrated, will appear on the TV screen.
Note
Before recording, please confirm the recording start position.
ꢀ Recording will start. (The
indicator will light)
5. Press REC/ITR (z) repeatedly to select the
recording time length.
Copying from DVD to VCR
This unit allows you to copy the contents of a DVD to a
VHS tape.
At the end of the recording, the DVD/VCR Receiver
will stop recording and shut off.
Press DVD/CD to select DVD mode.
ꢀ During Instant Timer Recording, changing the channel
on the DVD/VCR Receiver will not be possible.
ꢀ You can stop the recording by pressing STOP.
ꢀ Each additional press or REC/ITR(z) increases record-
ing time by 30 minutes until you reach a maximum of 9
hours.
1. Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
2. Insert VHS Tape
Insert a blank VHS video tape into the VCR deck.
Checking the Recording Time
Press REC/ITR (z) once to check the recording time.
The recalled setting will automatically return to the TV
screen after 6 seconds.
3. Press COPY button on the unit front panel or
press REC/ITR (z) button on the remote control.
The DVD will go into Play mode and the VCR will go
into Record mode.
To extend the Recording Time
The recording time can be extended anytime by press-
ing REC/ITR (z).
Subsequent presses result in advancing the recording
time by 30-minute increments.
ꢀ If the DVD disc menu appears, you may need to press
PLAY manually to begin copying.
ꢀ “COPY” indicator will light.
4. Stopping the Copy Process
When the DVD is finished playing, press STOP to end
copying.
Notes
ꢀ If you press PAUSE/STEP during instant timer recording, the
DVD/VCR Receiver will enter the recording pause mode.
Instant timer recording is cancelled.
ꢀ If the DVD/VCR Receiver is set to “0H00M”, the DVD/VCR
Receiver goes to normal recording mode.
You must stop the Copy process manually when the DVD
movie ends, or the unit may replay and record over and
over again.
Notes
ꢀ If the DVD you are attempting to copy is copy protected, you
will not be able to copy the disc. It is not permitted to copy
Macrovision encoded DVDs. “LOCK” is displayed in the dis-
play window.
ꢀ When you stop the DVD playback during copying, VCR
recording mode also stops automatically.
ꢀ You must set Progressive Scan to Off to copy process.
ꢀ The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materials,
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and/or
criminal liability.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation (Continued)
VHS Hi-Fi Stereo System/
MTS Broadcast
MTS (Multi-Channel TV Sound)
This DVD/VCR Receiver will decode MTS stereo and
bilingual (SAP) off-the-air broadcast sound signals. It
also decodes stereo TV sound from local cable compa-
nies, as long as they operate on assigned cable fre-
quencies and use the EIA-recommended MTS
This DVD/VCR Receiver is equipped with the VHS Hi-Fi
audio sound system for recording and playback. The
information below gives a brief description of Hi-Fi audio
and how to record and play a tape in the Hi-Fi audio
mode.
stereo/bilingual TV sound system.
Multichannel TV Sound Indicator (MTS)
Playback with Hi-Fi Stereo Audio Sound
Shows onscreen as illustrated below when ENTER is
A stereo TV with AUDIO/VIDEO input jacks or a stereo
audio system is required for true stereo playback. To
experience the full and rich stereo sound available with
Hi-Fi recorded tapes, we recommend the connection of
this unit to a home stereo audio system.
pressed.
ꢀ
One or both of the indicators will light, depending on the
MTS broadcast.
TV screen
STEREO
Lights up when a stereo broadcast
is being received.
CH 4
STEREO/SAP
1. Set the AUDIO MODE option to HI-FI on the
SETUP menu .
SAP
Lights up when a SAP BILINGUAL
broadcast is being received.
If only STEREO appears on the TV screen.
The DVD/VCR Receiver can record in stereo onto the VHS Hi-
Fi audio tracks when the BROADCAST TYPE option is in the
STEREO position. The DVD/VCR Receiver will also record
mono audio onto the mono audio track.
If only SAP appears on the TV screen.
Set the BROADCAST TYPE option to SAP.
2. Set the AUDIO OUTPUT option to STEREO
position.
If STEREO/SAP appears on the TV screen
Use the BROADCAST TYPE option to select the desired
recording mode (STEREO or SAP).
STEREO: The left channel sound (L) is heard from the left
speaker and the right channel sound (R) is heard from the
right speaker.
LEFT: The left channel sound (L) is heard from both
speakers.
SAP (Second Audio Program) Recording
Some stations transmit a Second Audio Program, which
is used for a second language or additional information.
When the station broadcasts a Second Audio Program,
follow the procedure below to record the SAP.
RIGHT: The right channel sound (R) is heard from both
speakers.
1. Insert a video cassette with the safety tab intact.
2. Set the BROADCAST TYPE option to SAP
(SETUP menu).
Do this if only the SAP appears on the TV screen or you
know the program will use the SAP.
3. Press MENU.
4. Insert a cassette and press PLAY.
Adjust volume at your stereo system.
3. Press MENU.
4. Select the desired recording speed (SP or SLP)
with the SP/SLP button.
5. Select the desired channel. SAP should appear
on the TV screen.
6. Press REC/ITR (z) once
You are now recording the program you see and hear on the
TV.
7. Press STOP to stop recording.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation (Continued)
Tape Counter Memory Feature
Additional Information
ꢀ
In manual recording, Timer recording, Instant Timer
Recording, playback, or fast forward modes, the DVD/VCR
Receiver automatically starts rewinding the tape at the end
of the tape. The cassette will stop at the beginning of the
tape and be ejected, and the DVD/VCR Receiver will turn
itself off.
Real-Time Counter
Shows length of tape run in hours, minutes, and
seconds. Press CLK/CNT to select the real-time
counter display.
Every press of CLK/CNT changes the TV screen as
illustrated below.
ꢀ
ꢀ
After you have finished using the DVD/VCR Receiver,
rewind, eject, and remove the cassette. Place the cassette
in its protective sleeve to protect it from dust. It is not nec-
essary to rewind the cassette before removing it, but if you
do, it will be ready to play or record the next time you use it.
2:15 AM
CLOCK
0:05:25
COUNTER
REM 1:07
REMAINING TIME
Be sure the DVD/VCR Receiver Channel Selector is on the
correct channel you wish to record. The channel that is
being recorded can always be checked by tuning the televi-
sion to the DVD/VCR Receiver channel (3 or 4) and press-
ing the VCR button to set the DVD/VCR Receiver to VCR
mode (VCR appears in the display window).
ꢀ
ꢀ
ꢀ
Counter changes to “0:00:00” when the cassette is
ejected.
The real-time counter does not operate if nothing is
recorded on the tape.
The real-time counter will not work unless a tape is
inserted.
ꢀ
Do not attempt to hook up more than one television set to
the DVD/VCR Receiver for either recording or playback.
Note
During the “L1 OPT” mode, the OSD(On Screen
Display) can not be changed.
Auto Play System
This DVD/VCR Receiver features automatic playback.
Load a cassette (with the safety tab removed).
Counter Memory Feature
This is useful if there is a section of tape you want to
view immediately after recording or if you want to return
to the same point several times.
ꢀ
ꢀ
ꢀ
The Output Source is changed to VCR mode automatically.
The power turns on automatically and playback begins.
At the end of the tape, the DVD/VCR Receiver stops and
rewinds the tape.
ꢀ
The cassette is ejected after rewinding and the VCR turns
itself off automatically.
1. Begin recording or playing a tape.
2. Press CLK/CNT repeatedly to display the
real-time counter on the TV screen.
3. At the point that you want to locate later, reset
the real-time counter to “0:00:00” by pressing
CLEAR.
4. Continue to play or record.
Note
Auto power off does not function during regular DVD play
mode. (DVD/VCR Receiver power stays on.)
5. Press STOP when recording or playback
finishes.
6. Press REW (
).
m
S-VHS Quasi Playback (SQPB)
The tape automatically stops when the tape counter
returns to about “0:00:00”.
ꢀ
This DVD/VCR Receiver can also play back a tape which is
recorded in S-VHS playback picture.
ꢀ
ꢀ
This DVD/VCR Receiver cannot record in S-VHS format
SQPB is an abbreviation for S-VHS Quasi Playback.
Tape Remaining
This function shows the remaining time on the tape
during recording or playback.
Press CLK/CNT repeatedly until the REM indicator
displays on the TV screen during recording or playback.
Note
The remaining tape length indicator may not be displayed
correctly depending on the condition of the tape and the kind of
the tape (T-140, T-160, or T-210 etc)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD and Video CD Operation
Playing DVD and Video CD
General Features
Note
Playback Setup DVD
ꢀ Turn on the TV and select the video input source connected
to the DVD/VCR Receiver.
ꢀ Audio system: Turn on the audio system and select the input
source connected to the DVD/VCR Receiver.
ꢀ Set the Output Source to DVD as shown in “Selecting the
Input/Output Source” on page 15.
VCD2.0
VCD1.1
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
Moving to another TITLE
1/3
DVD
1. Press OPEN/CLOSE ( ) to open the disc tray.
If a disc has more than one title, you can move to
another title as follows:
2. Load your chosen disc in the tray, with the label
facing up.
ꢀ
Press DISPLAY, then press the appropriate number
buttons (0-9) to select a title number.
When a double-sided DVD is inserted, make sure
the side you want to play is facing down.
Moving to another CHAPTER/TRACK
3. Press OPEN/CLOSE ( ) to close the tray.
“READING” appears in the display window, and
playback starts automatically. If playback does not
start, press PLAY.
1/12
1/3
VCD1.1
DVD
VCD2.0
If a title on a disc has more than one chapter or a disc
has more than one track, you can move to another
chapter/track as follows:
In some cases, the disc menu might appear instead.
ꢀ Press SKIP (.) or (>) briefly during playback to
return to the beginning of the current chapter/track or
to select the next chapter/track.
ꢀ Press SKIP (.) twice in quick succession to step
back to the previous chapter/track.
If a menu screen is displayed
A menu screen may appear automatically after loading a
DVD.
DVD
ꢀ To go directly to any chapter/track during playback,
press DISPLAY. Use v/V to select Chapter/track icon.
Then, enter the chapter/track number with the number
buttons (0-9).
Use b/B/v/V buttons to select the title/chapter you
want to view, then press ENTER to start
playback.
Press TOP MENU or DISC MENU to return to the menu
screen.
Note
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.
VCD2.0
ꢀ Use the number buttons to select the track you want
to view.
VCD2.0
VCD1.1
DVD
Slow Motion
Press RETURN to return to the menu screen.
ꢀ Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
22.
1 Press SLOW during playback or still mode.
The player will enter SLOW mode.
2 Use REW or FWD (or SLOW) to select the required
speed:
t 1/16, t 1/8, t 1/4, t 1/2 (backward), or
T 1/16, T 1/8, T 1/4, T 1/2 (forward).
Notes
3 To return to playback, press PLAY.
ꢀ If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit password
must be entered and/or the disc must be authorized
(see Parental Control, on page 23).
Note
Slow motion playback in reverse is not applicable for
Video CD.
ꢀ DVDs may have a Region Code.
Still Picture and Frame-by-Frame
Your DVD/VCR Receiver will not play discs that have
a Region Code different from your DVD/VCR
Receiver. The Region Code for this DVD/VCR
Receiver is 1 (one).
ꢀ Do not keep a fixed image displayed on the screen
for a long time.
VCD2.0
VCD1.1
DVD
Playback
1 Press PAUSE/STEP during playback.
The DVD/VCR Receiver will go into PAUSE mode.
2 You can advance the picture frame by frame by
pressing PAUSE/STEP repeatedly on the remote con-
trol.
3 To return to playback, press PLAY.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD and Video CD Operation (Continued)
Repeat A-B
General Features (Continued)
A
B
A
*
OFF
VCD2.0
VCD1.1
DVD
VCD2.0
VCD1.1
DVD
Search
To repeat a sequence in a title:
1 Press REW (m) or FWD (M) during playback.
The DVD/VCR Receiver will now go into SEARCH mode.
2 Each press of the REW (m) or FWD (M) button
will increase the speed of the search mX2, mX4,
mX16, mX100 (backward) or MX2, MX4,
MX16, MX100 (forward).
1 Press REPEAT A-B at your chosen start point.
“ A * ” appears briefly on the TV screen.
2 Press REPEAT A-B again at your chosen end point.
“A B” appears briefly on the TV screen, and the repeat
sequence begins.
3 To cancel the sequence, press REPEAT A-B.
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
3D Surround
3 To return to playback, press PLAY.
BYPASS
3D SUR
VCD2.0 VCD1.1
DVD
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
VCD2.0
VCD1.1
Karaoke DVD
Random
1 Press RANDOM during playback or in Stop mode.
The unit automatically begins Random Playback and
“RANDOM” appears on the TV screen.
2 To return to normal playback, press RANDOM until
“NORMAL” appears on the TV screen.
1 Press SOUND MODE to select “3D SUR” during
playback.
2 To turn off the 3D Surround effect,
press SOUND MODE again to select “BYPASS”.
Tips
By pressing SKIP (. or >) during Random play-
back, the unit selects another title (track) and resumes
Random playback.
0:16:57
- : - - : - -
DVD
Time Search
Notes
The Time Search function allows you to start playing at
any chosen time on the disc.
ꢀ This function only works with DVD Karaoke discs and
Video CD without PBC.
ꢀ On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Random function. See
page 22.
1 Press DISPLAY during playback. The on-screen dis-
play appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
2 Within 10 seconds, use v/V to select the Time
Search icon in the on-screen display.
VCD2.0
VCD1.1
DVD
Repeat
The “-:--:--” appears in the Time Search box.
3 Within 10 seconds, use the numbered buttons to
enter the required start time. Enter hours, minutes
and seconds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4 Within 10 seconds, press ENTER.
Playback starts from the selected time on the disc. If you
enter an invalid time, playback will continue from the current
point.
CHAPT
TRACK
ALL
TITLE
OFF
DVD Video Discs - Repeat Chapter/Title/Off
1 To repeat the currently playing chapter, press
REPEAT.
The Repeat Chapter icon appears on the TV screen.
2 To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
VCD2.0
VCD1.1
DVD
Zoom
Video CDs - Repeat Track/All/Off
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
2 To repeat the disc currently playing, press REPEAT a
second time.
The Repeat All icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
1 Press ZOOM during playback or still playback to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increases up to six steps.
2 Use b/B/v/V buttons to move through the zoomed
picture.
3 Press CLEAR to resume normal playback or return to
the paused image.
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 22.
Notes
ꢀ The Zoom function may not work with some DVDs.
ꢀ The Zoom function may not work with some
multi-angle scenes.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD and Video CD Operation (Continued)
General Features (Continued) Special DVD Features
Checking the contents of DVD Video
VCD2.0
VCD1.1
DVD
Marker Search
MARKER SEARCH
discs: Menus
1/9
DVDs may contain menus that allow you to access spe-
cial features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select an
option. Or, use b/B/v/V buttons to highlight your selec-
tion, then press ENTER.
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER when playback
reaches the spot that you want to memorize.
The Marker icon will appear on the TV screen briefly.
2 Repeat step 1 to enter up to nine Marker points on a
disc.
DVD
Title Menu
1 Press TOP MENU.
To Recall a Marked Scene
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Within 10 seconds, use 1/2 or number button to
select a Marker number that you want to recall.
3 Press ENTER.
Playback will start from the Marked scene.
4 To remove the MARKER SEARCH menu, press
SEARCH.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3 To remove the title menu, press TOP MENU again.
DVD
Disc Menu
To Clear a Marked Scene
1 Press DISC MENU.
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Within 10 seconds, use 1/2 or number button to
select a Marker number that you want to erase.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
The disc menu is displayed.
2 To remove the disc menu, press DISC MENU again.
1/1
DVD
Camera Angle
If the disc contains sequences recorded from different
camera angles, the angle icon appears for a short while
on the TV screen. You can then change the camera
angle if you wish.
5 To remove the MARKER SEARCH menu, press
SEARCH.
ꢀ All markers are erased when the disc is ejected.
ꢀ
Press ANGLE repeatedly during playback to select a
desired angle.
DVD
The number of the current angle appears on the display.
Changing Video Mode
ꢀ With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
ꢀ To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback. The
new video mode selected is displayed on the TV
screen. Check whether the video quality has
improved. If not, repeat the above procedure until pic-
ture quality is improved.
Changing the Audio Language
1
ENG
D
DVD
5.1 CH
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
Changing the Audio Channel
STER.
RIGHT
LEFT
VCD2.0
VCD1.1
ꢀ Video mode sequence:
Press AUDIO repeatedly during playback to hear a dif-
ferent audio channel (STER., LEFT or RIGHT).
Auto
Film
Video
Auto
→
→
→
ꢀ If you turn off the power, the video mode will return to
initial default state (Auto).
1
ENG
DVD
Subtitles
Detailed Description of each Video Mode
Auto : The source material of the DVD video (film material or
video material) is determined from disc information.
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
Film : Suitable for playing film based content or video based
material recorded by the progressive scan method.
Video : Suitable for playing video based content with
comparatively little motion.
Note
If
appears, the feature is not available on the disc.
Screen Saver
The screen saver picture appears when you leave the
DVD/VCR Receiver in Stop mode for about five min-
utes.
Note
The video mode setting only works when the Progressive Scan
mode is set to “On” in the Setup menu.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio CD and MP3/WMA Disc Operation
Playing an Audio CD and MP3/WMA
Notes on MP3/WMA Recordings
CD
MP3
About MP3
WMA
Discs
ꢀ An MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call
files that have the “.mp3” file extension “MP3 files”.
ꢀ The DVD/VCR Receiver can not read an MP3 file
that has a file extension other than “.mp3”.
The DVD/VCR Receiver can play MP3/WMA formatted
recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA discs, read the notes on
MP3/WMA Recordings on right.
1. Insert a disc and close the tray.
Audio CD: Audio CD menu appears on the TV
screen. Go to step 4.
About WMA (Windows Media Audio) Files
ꢀ An WMA file is a Microsoft audio compression
technology.
ꢀ WMA(Windows Media Audio) offers double audio
compression of the MP3 format.
MP3/WMA disc: The MP3/WMA-JPEG choice menu
appears on the TV screen. Go to step 2.
MP3 WMA
MP3/WMA Disc compatibility with this player is
limited as follows:
JPEG
1. Sampling Frequency / only at 44.1kHz (MP3),
22.05 - 44.1kHz (WMA)
2. Bit rate / within 32 - 320kbps (MP3),
32 - 128kbps (WMA)
2. Use 3/4to select the MP3/WMA then press
ENTER.
The MP3/WMA menu appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
3. CD-R physical format should be “ISO 9660”
4. If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
“Direct-CD” etc., it is impossible to playback
MP3/WMA files. We recommend that you use “Easy-
CD Creator”, which creates an ISO9660 file system.
5. A single session disc requires MP3/WMA files in the
first track. If there is no MP3/WMA file in the 1st
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
the disc or use a new one.
6. File names should be named using 8 letters or less
and must incorporate “.mp3” or “.wma” extension
e.g. “********.MP3” or “********.WMA”.
7. Do not use special letters such as “/ : * ? “ < > ” etc.
8. Total number of files on the disc should be less than
650.
Program
MP3 WMA
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
Clear All
OFF
00:00
3. Use 3/4 to select a folder then press ENTER.
A list of files in the folder appears.
4. Use 3/4to select a track then press PLAY or
ENTER.
Playback starts.
During playback, the current track’s elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Press TOP MENU to move to the next page.
Press DISC MENU to move to the previous page.
This DVD/VCR Receiver requires discs/recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are auto-
matically set to these standards. There are many differ-
ent types of recordable disc formats (including CD-R
containing MP3/WMA files). Because this area of tech-
nology is still evolving, Toshiba cannot guarantee that
all recordable discs will produce optimal playback quali-
ty. The technical criteria set forth in this owner's manual
are meant only as a guide.
Program
Program
CD
MP3 WMA
TRACK01
FILE 1
FILE 2
FILE 3
FILE 4
FILE 5
FILE 6
FILE 7
FILE 8
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
TRACK08
Clear All
BYPASS
Clear All
OFF
0: 56: 18
STER.
00:00
1
Please be advised that you must obtain permission
from the applicable copyright owners to download
copyrighted content, including music files, in any
format, including the MP3 and WMA formats, prior
to the downloading thereof. Toshiba has no right to
grant and does not grant permission top download
any copyrighted content.
Audio CD Menu
MP3/WMA Menu
Tip
If you are in a File List and want to return to the Folder
List, use the 3/4to highlight and press ENTER to
return to the previous menu screen.
Microsoft, Windows Media, and the
Windows Logo are trademarks or
registered trademarks of Microsoft
Corporation in both the United States
and other countries
5. To stop playback at any other time, press
STOP.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio CD and MP3/WMA Disc Operation (Continued)
CD
MP3
CD
WMA
Pause
Repeat A-B
1 Press PAUSE/STEP during playback.
To repeat a sequence.
2 To return to playback, press PLAY or press
PAUSE/STEP again.
1 During disc playback, press REPEAT A-B at your cho-
sen starting point.
The Repeat icon and “ * ” appears on the menu screen.
A
CD
MP3
2 Press REPEAT A-B again at your chosen end point.
The Repeat icon and “A B” appears on the menu screen,
and the sequence begins to play repeatedly.
WMA
Moving to another Tracks
ꢀ Press SKIP (. or >) briefly during playback to
go to the next track or to return to the beginning of
the current track.
3 To exit the sequence and return to normal play, press
REPEAT A-B again.
The Repeat icon and “OFF” appears on the menu screen.
ꢀ Press SKIP (.) twice in quick succession to step
back to the previous track.
ꢀ On Audio CDs, to go directly to any track, enter the
track number using the numbered buttons (0-9) dur-
ing playback.
CD
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
CD
MP3
WMA
Search
1 Press REW (m) or FWD (M) during playback.
The player will now go into SEARCH mode.
1 Press SOUND MODE to select “3D SUR”
during playback.
2 Each press of the REW (m) or FWD (M) button
will increase the speed of the search mX2, mX4,
mX8 (backward) or MX2, MX4, MX8 (for-
ward).
2 To turn off the 3D Surround effect,
press SOUND MODE again to select “BYPASS”.
Search speed and direction are indicated on the menu
screen.
CD
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
3 To exit SEARCH mode, press PLAY.
CD
MP3
WMA
Random
1 Press RANDOM during playback or in Stop mode.
The unit automatically begins Random Playback and
“RAND.” appears on the menu screen.
2 To return to normal playback, press RANDOM repeat-
edly until “RAND.” disappears from the menu screen.
Note
RANDOM only works in File List of MP3 and WMA
discs.
CD
MP3
WMA
Repeat Track/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu
screen.
2 To repeat all tracks on a disc, press REPEAT a sec-
ond time.
The Repeat icon and “ALL” appears on the menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG File Operation
JPEG
Selecting other Files
Viewing JPEG Files on a Disc
Press SKIP (> or .) once while viewing a picture
This DVD/VCR Receiver can play discs with JPEG files.
Before playing JPEG files, read the notes on JPEG
Files on right.
to advance to the next file or to the previous file.
Still Picture
1 Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
1. Insert a disc and close the tray.
The MP3/WMA-JPEG choice menu appears on the
TV screen.
MP3 WMA
JPEG
To flip the picture
Press 3/4while showing a picture to flip the
picture horizontally or a vertically.
2. Use 3/4to select the JPEG then press ENTER.
The JPEG menu appears on the TV screen.
To rotate picture
Press 1/2 while showing a picture to rotate the
picture clockwise or counter clockwise.
JPEG
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
Notes on JPEG Files
Off
Slide Speed
ꢀ Depending upon the size and number of the JPEG
files, it could take a long time for the DVD player to
read the disc’s contents. If you don’t see an on-
screen display after several minutes, some of the files
are too big — reduce the resolution of the JPEG files
to less than 3072x2048 pixels and burn another disc.
3. Use 3/4 to select a folder, and ENTER.
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
Tip
If you are in a file list and want to return to the Folder
list, use the 34 buttons on the remote to highlight
ꢀ Total number of files and folders on the disc should
be less than 650.
“
and press ENTER to return to the
”
ꢀ Some disc may be incompatible due to different
recording format or condition of disc.
previous menu screen.
ꢀ When you are using software such as “Easy CD
Creator” to burn the jpeg files into the CD-R, ensure
that all the selected files have the “.jpg” extensions
when copying into the CD layout.
4. If you want to view a particular file, use 3/4to
highlight the file and press ENTER or PLAY.
Viewing the file function starts.
While viewing a file, press RETURN to move to the
previous menu (JPEG menu).
Press TOP MENU to move to the next page.
Press DISC MENU to move to the previous page.
ꢀ If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” files.
ꢀ File names without “.jpg” extension will not be able to
be read by this DVD/VCR Receiver, even though the
files are shown as JPEG image files in windows
explorer.
Folder1
JPEG
Picture1
Picture2
Picture3
Picture4
Picture5
Picture6
Picture7
Off
5/32
1024X768
Slide Speed
5/32
1024X768 Picture5.jpg
Tip
There are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Use 1/2 to highlight the Slide
Speed then use 3/4 to select the option you want to
use, and press ENTER.
5. To stop viewing at any other time, press STOP.
The JPEG menu appears.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD2.0
VCD1.1
CD
MP3
WMA
Programmed Playback
Programmed Playback with Audio CDs Programmed Playback with Video CD
and MP3/WMA Discs
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 22.
The Program function enables you to store your
favourite tracks from any disc in the player memory.
1. Insert Video CD and close the tray.
Program can contain 30 tracks.
2. Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
1. Press PROGRAM during playback or in the Stop
Program
E
VCD
mode to enter the Program Edit mode.
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
E
The
mark will appear to the right of the word Program
on the right side of the menu screen.
Clear All
Note
Press PROGRAM to exit the Program Edit mode;
E
Note
the
mark will disappear.
Press RETURN, PROGRAM or PLAY to exit the Program menu.
2. Select a track, then press ENTER to place the
selected track on the Program list.
3. Follow steps 2-6 of “Programmed Playback with
Audio CD and MP3/WMA disc” on left.
4. Press PLAY (N) or ENTER to start.
Playback begins in the order in which you programmed the
tracks. “PROGRAM” indicator will appear briefly on the TV
screen.
3. Repeat step 2 to place additional tracks on the
Program list.
E
Program
Playback stops after all of the tracks on the Program list
have played once.
MP3 WMA
E
Program
CD
FILE 8
FILE 2
FILE 4
FILE 3
TRACK 1
TRACK 12
TRACK 8
TRACK 10
TRACK 3
FILE 1
FILE 2
FILE 3
FILE 4
FILE 5
FILE 6
FILE 7
FILE 8
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
5. To resume normal playback from
programmed playback, press PROGRAM.
“NORMAL” indicator will appear briefly on the TV screen.
Clear All
OFF
Clear All
BYPASS
00:00
3
0: 56: 18
STER.
Repeat Programmed Tracks
ꢀ To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu screen.
ꢀ To repeat all tracks on the program list, press
REPEAT a second time.
Audio CD menu
MP3/WMA menu
4. Press 2.
The programmed track you selected last is highlighted on
the program list.
The Repeat icon and “ALL” appears on the menu screen.
ꢀ To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
5. Use 3/4to select the track you want to start
playing.
Note
Press TOP MENU to move to the next page.
Press DISC MENU to move to the previous page.
For Video CD, the Repeat icon will only appear briefly on the
screen.
6. Press PLAY or ENTER to start.
Playback begins in the order in which you programmed the
tracks and “PROG.” appears on the menu screen.
Playback stops after all of the tracks on the Program list
have played once.
Erasing a Track from Program List
1 Press PROGRAM during playback (Audio CD and
MP3/WMA disc only) or stop to enter the Program
Edit mode.
E
The
mark will appear.
2 Press 2 to move to the Program list.
3 Use 3/4to select the track that you wish to erase
from the Program list.
7. To resume normal playback from programmed
playback, press PROGRAM.
4 Press CLEAR.
Select a track of CD (or MP3/WMA) list and then
The track will be erased from the Program list.
press ENTER or PLAY.
“PROG” indicator disappears from the display window.
Erasing the whole Program List
1 Follow steps 1-2 of “Erasing a Track from Program
List” as above.
2 Use 3/4to select “Clear All”, then press ENTER.
The complete Program for the disc will be erased.
Notes
ꢀ The programs are cleared when the disc is removed.
ꢀ The programs are cleared when another function mode
(VCR, radio etc.) is selected.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Setup
Adjust the following settings for the built-in 5.1 channel
surround decoder.
Distance
If you connected speakers to your DVD/VCR Receiver ,
setting the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the same time. (1~20 ft, 1 ft = 0.30 m)
Disc Audio
Disc Subtitle
R
R
Disc Menu
Rating
Front
L
Volume
Size
0 dB
Small
1 ft
Area Code
TV Aspect
Distance
Test
Note
Menu Language
You can not set the distance of subwoofer speaker.
Progressive Scan
Return
5.1 Speaker Setup
Others
Test
1. Select “5.1 Speaker Setup” using the 3/4
Press ENTER to test the signals of each speaker.
Adjust the volume to match the volume of test signals
memorized in the system.
ꢀ Front Left (L) → Centre → Front Right (R) →
Rear Right (R) → Rear Left (L) → Subwoofer
buttons on the setup menu.
2. While “5.1 Speaker Setup” is selected, press 2
button.
3. Press 2buttons to select the desired speaker.
4. Adjust options by using 341 2buttons.
Return
Press ENTER to return to the previous menu.
Speaker selection
Select a speaker that you want to adjust. ((Front speak-
ers (Left), Centre Speaker, Front speakers (Right), Rear
speakers (Left), Rear speakers (Right), or Subwoofer))
Note
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Volume
Press 1/ 2to adjust the output level of the selected
speaker. (-6dB ~ 6dB)
Size
Since the speaker settings are fixed, you cannot
change the settings.
ꢀ Subwoofer’s size is fixed “Large” and the other
speaker’s size are fixed “small”.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
Presetting the Radio Stations
Listening to the Radio
You can preset 50 stations for FM and AM. Before tun-
ing, make sure that you have turned down the volume.
Preset radio stations in the DVD/VCR Receiver memory
first (see “Presetting Radio Stations” on the left).
1. Press FM/AM on the remote control or RADIO on
the front panel until the frequency band appears
on the display and TV screen.
1. Press FM/AM on the remote control or RADIO on
the front panel until the frequency band appears
on the display and TV screen.
The last received station is tuned in.
- - - - - - - RADIO - - - - - - - 1/10
2. Use 3/4on the remote control repeatedly to
AM
AM 1720kHz
AM 600kHz
AM 1400kHz
AM 1000kHz
530kHz
select the preset station you want.
Each time you press the button, the DVD/VCR Receiver
tunes in one preset station at a time.
FM/AM
MEMORY/CLEAR
TUNING
3. Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME (3or 4) on
the remote control repeatedly.
2. Use 3/4on the remote control or
CH/PRESET (
desired Station.
If you select a blank column, R-SKIP appears in the
display window.
/
) front panel to select the
To Clear the Stored Radio Stations
1. Press FM/AM on the remote control or on the
front panel until the frequency band appears on
the display and TV screen.
- - - - - - - RADIO - - - - - - - 2/10
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
- - - - - - - RADIO - - - - - - - 1/10
AM
AM 1720kHz
AM 600kHz
530kHz
AM 1400kHz
AM 1000kHz
FM/AM
TUNING
MEMORY/CLEAR
FM/AM
MEMORY/CLEAR
TUNING
3. Press FM/AM on the remote control or front
panel to select the desired band.
2. Use 3/4on the remote control to select your
desired station.
4. Hold down TUNING (
/
) on the front panel or
TUNING (3/4) remote control for 1 or 2 seconds,
- - - - - - - RADIO - - - - - - - 2/10
and a station is searched for automatically.
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
5. Press MEMORY on the remote control.
The station is stored.
FM/AM
TUNING
MEMORY/CLEAR
3. Press CLEAR the remote control to clear the
stored radio station.
6. Repeat steps 2 to 5 to store other stations.
- - - - - - - RADIO - - - - - - - 6/10
FM 87 . 0MHz
FM/AM
TUNING
Note
While record or record pause mode, the CLEAR
function may not be operated.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation (Continued)
Tuning into a Station Manually
1. Press FM/AM on the remote control until the fre-
quency band appears on the display and TV
screen.
2. Press FM/AM on the remote control to select the
desired band.
3. Press TUNING (3/4) on the remote control to
tune in the desired station.
For your reference
Weak FM stations
“ST” may flash when a weak FM stereo signal is
received, select another station or realign the antenna.
To turn off the radio
Press POWER (I/1) to turn the DVD/VCR Receiver off
or select another function mode (DVD or VCR).
Tuning into a Station Automatically
Hold down TUNING (3/4) on the remote control for 1
or 2 seconds, and a station is searched for automatical-
ly.
Note
The search may not stop at a station with a very weak
signal.
Labeling Stations
1. Press 2 to move to the station name column.
- - - - - - - RADIO - - - - - - - 6/10
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
FM/AM
TUNING
MEMORY/CLEAR
2. Use the 3/4buttons to select the character then
use the 1/2buttons to shift to the next or previ-
ous character.
3. Press ENTER to confirm the station name.
4. Press ENTER on the remote control.
The station name is stored.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Your TV with the Supplied Remote
The remote control can be compatible with various
brands of TV by setting their control codes. The TOSHI-
BA code has initially been set to control TOSHIBA TVs.
TV POWER
Setting TV Control Codes
INPUT
1. Press TV to set the remote control operating
your TV.
2. While holding down PROGRAM button, enter
the two digits of your TV’s brand code (listed on
page 41) using number buttons.
PROGRAM
3. Release PROGRAM.
By pressing
TV POWER
CH/TRK (4/3)
You can
Turn the TV on or off.
To select TV channels in the upper
or lower direction.
VOLUME
CH/TRK
VOLUME (4/3)
Adjust the volume of the TV.
INPUT
Switch the TV’s input source
between the TV and other input
sources.
Important
Some TV’s may not respond to all the operations
above, or may not be operated at all with this
remote control. In this case, operate your TV with
its own remote control.
Notes
ꢀ For some brands, several control codes (brand
codes) are allocated. Try each of them until the but-
tons work on your TV.
ꢀ If you replace the remote control’s batteries, set the
brand code again.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Your TV with the Supplied Remote (Continued)
Table of TV Brand Codes
Brand name of your TV
Toshiba
Bell & Howell
Carver
Brand Code
Brand name of your TV
Runco (NEC)
Samsung
Sanyo
Brand Code
14
01
11,12
09
09
10
Scotch
11
Celebrity
Citizen
03
Scott
11
12
Curtis Mathes
Dumont
Electro band
Emerson
Fisher
09, 12
Sears
01, 02, 09, 10, 11
14
Sharp
08, 13
03
Sony
03
09, 11
Soundesign
Supreme
Sylvania
Tandy
11
09
03
GE
02, 07, 11
10
Gibraiter
Goldstar
Hallmark
Hitachi
14
08
11
Technics
Techwood
Teknika
TMK
07, 15
11
07
06
04, 10, 12
Infinity
10
JBL
10
11
JCB
03
Victor
05
JVC
05
Vidikron
Vidtech
Wards
10
LXI
01, 02, 09, 10, 11
11
Magnavox
Marantz
Megatron
Memorex
MGA
10
10, 11, 13
14
10
Zenith
06, 11
04, 09, 11
04, 11
Midland
Mitsubishi
Motorola
MTC
02, 07, 14
04, 11
08
12
NAD
01, 11
Nikko
11
Optimus
Optonica
Panasonic
Penney
Philco
09
08
07, 10, 15
01, 02, 07, 11, 12
10
Philips
10
Pioneer
Princeclub
Prism
16
12
07
Proscan
Proton
02
11
Pulser
14
Quasar
Radio Shack
RCA
07, 15
13
02
Realistic
09, 11, 13
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Solution
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall outlet
securely.
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
The power is on, but the
DVD/VCR Receiver
does not work.
ꢀ The TV is not set to receive DVD/VCR
Receiver signal output.
ꢀ Select the appropriate video input mode
on the TV so the picture from the
DVD/VCR Receiver appears on the TV
screen.
No picture.
ꢀ Press the TV/VCR button on the remote
control repeatedly to choose VCR
mode. VCR MODE appears in the dis-
play window.
ꢀ TV/VCR mode for DVD/VCR Receiver is
set to TV MODE.
ꢀ The video cable is not connected
securely.
ꢀ Connect the video cable securely.
ꢀ The connected TV power is turned off.
ꢀ Turn on the TV.
No sound.
ꢀ The equipment connected with the
audio cable is not set to receive
DVD/VCR Receiver signal output.
ꢀ Select the correct input mode on the
audio receiver so you can listen to the
sound from the DVD/VCR Receiver.
ꢀ The audio cables are not connected
securely.
ꢀ Connect the audio cable securely.
ꢀ The power of the equipment connected
with the audio cable is turned off.
ꢀ Turn on the equipment connected with
the audio cable.
ꢀ The audio connecting cord is damaged.
ꢀ The disc is dirty.
ꢀ Replace it with new one.
ꢀ Clean the disc.
The playback picture is
poor.
ꢀ Tape heads are dirty.
ꢀ Clean video heads.
ꢀ Tape is a rental or was recorded on
another VCR.
ꢀ Use CH/TRK (v/V) for manual tracking
adjustment while tape is playing.
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
The DVD/VCR Receiver
does not start playback.
ꢀ An unplayable disc is inserted.
ꢀ Insert a playable disc. (Check the disc
type, color system, and Regional code.)
ꢀ The disc is placed upside down.
ꢀ
Place the disc with the playback side down.
ꢀ The disc is not placed within the guide.
ꢀ Place the disc on the disc tray correctly
inside the guide.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ The Rating level is set.
ꢀ Cancel the Rating function or change
the rating level.
The remote control
does not work properly.
ꢀ The remote control is not pointed at the
remote sensor of the DVD/VCR Receiver.
ꢀ Point the remote control at the remote
sensor of the DVD/VCR Receiver.
ꢀ The remote control is too far from the
DVD/VCR Receiver.
ꢀ Operate the remote control within 23 ft
(7 m).
ꢀ There is an obstacle in the path of the
remote control and the DVD/VCR
Receiver.
ꢀ Remove the obstacle.
ꢀ The batteries in the remote control are
exhausted.
ꢀ Replace the batteries with new ones.
ꢀ This remote control use the same
buttons for VCR and DVD functions
(ex. PLAY).
ꢀ When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Cause
Solution
Symptom
ꢀ Incorrect mode (e.g. Remote control in
TV mode).
ꢀ Press DVD/CD, VCR or FM/AM to
select the correct mode on the remote
control.
INPUT, VOLUME (v/V)
and b/B/v/V buttons on
remote control cannot
operate.
ꢀ Those channels were deleted with the
CH. ADD/DEL option.
ꢀ Use CH. ADD/DEL to restore channels.
See “Channel Selection” on page 18.
Some channels are
skipped over when using
CH/TRK (v/V)
ꢀ Antenna or cables are loose.
ꢀ Tighten connections or replace cable.
Picture and sound of
broadcasting channel are
weak or missing.
ꢀ Wrong CHANNEL SOURCE option is
being used.
ꢀ Try all CHANNEL SOURCE options.
See “Channel Selection” on page 18 for
details.
ꢀ Camcorder is off.
ꢀ Turn camcorder on and operate
properly.
Camcorder image is not
shown.
ꢀ DVD/VCR Receiver INPUT SELECT is
not set to LINE1(L1) or LINE2(L2).
ꢀ Press INPUT to select LINE input chan-
nel (LINE1(L1) or LINE2(L2)).
Camcorder image via
A/V input to DVD/VCR
Receiver is not shown on
TV screen.
ꢀ Clock in DVD/VCR Receiver is not set
to correct time.
ꢀ Set clock to correct time. See “Setting
the Clock” on page 19.
Timer recording is not
possible.
ꢀ Timer has been programmed
incorrectly.
ꢀ Reprogram Timer. See “Timer
Recording” on pages 25 and 26.
ꢀ
indicator light does not appear after
programming timer.
ꢀ Reprogram Timer.
ꢀ TV is not Stereo-compatible.
ꢀ No action is possible.
Stereo Audio Record
and/or Playback is not
present.
ꢀ Broadcast program is not in stereo for-
mat.
ꢀ No action is possible.
ꢀ DVD/VCR Receiver A/V Out jacks are
not connected to TV A/V In jacks.
ꢀ Make A/V connections. Stereo is
available only via A/V output from
DVD/VCR Receiver.
ꢀ DVD/VCR Receiver Audio/Video Out is
ꢀ Select AUX or A/V source as TV input.
not selected for viewing at the TV.
ꢀ DVD/VCR Receiver BROADCAST
TYPE mode is set to SAP or MONO.
ꢀ Set BROADCAST TYPE mode to
STEREO. See “VCR Setup Menu
Option” on page 18.
ꢀ The plugs and jacks are dirty.
ꢀ Wipe them with a cloth slightly mois-
tened with alcohol.
Severe hum or noise is
heard.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ The speakers and components are
connected poorly.
ꢀ Connect the speakers and components
securely.
ꢀ The DVD/VCR Receiver is located too
close to the TV.
ꢀ Move your TV away from the audio
components.
ꢀ The antenna is positioned or connected ꢀ Connect the antenna securely.
poorly.
Radio stations cannot be
tuned in.
ꢀ Adjust the antennas and connect an
external antenna if necessary.
ꢀ The signal strength of the stations is too ꢀ Tune in the station manually.
weak (when tuning in with automatic
tuning).
ꢀ No stations have been preset or preset
stations have been cleared (when
tuning by scanning preset stations).
ꢀ Preset the stations (page 38).
No sound from DIGITAL ꢀ DVD/VCR Receiver source is not set to
AUDIO IN (OPTICAL).
DIGITAL AUDIO IN (OPTICAL).
ꢀ Select OPTICAL by pressing AUX once.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
(See page 21).
Code Language
Code Language
Code Language
Code Language
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Abkhazian
Afar
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Fiji
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Lingala
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Finnish
Lithuanian
Macedonian
Malagasy
Malay
Afrikaans
Albanian
Amharic
Arabic
French
Frisian
Galician
Georgian
German
Greek
Malayalam
Maltese
Armenian
Assamese
Aymara
Maori
Greenlandic
Guarani
Gujarati
Hausa
Marathi
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Tamil
Basque
Tatar
Bengali; Bangla
Bhutani
Hebrew
Hindi
Nepali
Telugu
Thai
Norwegian
Oriya
Bihari
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Tibetan
Tigrinya
Tonga
Breton
Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Pashto, Pushto
Persian
Turkish
Turkmen
Twi
Polish
Italian
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Ukrainian
Urdu
Chinese
Corsican
Croatian
Czech
Uzbek
Vietnamese
Volapük
Welsh
Samoan
Sanskrit
Danish
Dutch
Korean
Scots Gaelic
Serbian
Wolof
English
Kurdish
Laothian
Latin
Xhosa
Esperanto
Estonian
Faeroese
Serbo-Croatian
Shona
Yiddish
Yoruba
Zulu
Latvian, Lettish
Sindhi
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Area Code List
Enter the appropriate code number for the initial setting “Area Code List” (See page 23).
Code Area
Code Area
Code Area
Code Area
AD
AE
AF
AG
AI
Andorra
ER
ES
ET
FI
Eritrea
Spain
Ethiopia
Finland
LC
LI
LK
LR
LS
LT
LU
LV
Saint Lucia
SC
SD
SE
SG
SH
SI
Seychelles
Sudan
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Islands
Slovak Republic
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Saint Tome and Principe
Former USSR
El Salvador
Syria
Swaziland
Turks and Caicos Islands
Chad
French Southern
Territories
Togo
Thailand
Tadjikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
Turkey
Trinidad and Tobago
Tuvalu
Taiwan
Tanzania
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libya
Morocco
Monaco
FJ
Fiji
AL
FK
FM
FO
FR
FX
Falkland Islands
Micronesia
Faroe Islands
France
France (European
Territory)
Gabon
Great Britain
Grenada
Georgia
French Guyana
Ghana
Gibraltar
Greenland
Gambia
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
SJ
LY
SK
SL
SM
SN
SO
SR
ST
SU
SV
SY
SZ
TC
TD
TF
MA
MC
MD
MG
MH
MK
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
Moldavia
Madagascar
Marshall Islands
Macedonia
Mali
Myanmar
Mongolia
Australia
Aruba
Azerbaidjan
Bosnia-Herzegovina
Barbados
Bangladesh
Belgium
Burkina Faso
Bulgaria
Bahrain
Burundi
Benin
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Belarus
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
Switzerland
Ivory Coast
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Former Czechoslovakia
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
Western Sahara
Macau
Northern Mariana Islands
Martinique (French)
Mauritania
Montserrat
Malta
Guinea
Guadeloupe (French)
Equatorial Guinea
Greece
S. Georgia & S. Sandwich
Isls.
Guatemala
Guam (USA)
Guinea Bissau
Guyana
Hong Kong
Heard and McDonald
Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
Israel
India
British Indian Ocean
Territory
Iraq
Iran
Iceland
Italy
Jamaica
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UK
UM
BJ
Mauritius
Maldives
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CS
CU
CV
CX
CY
CZ
DE
DJ
GT
GU
GW
GY
HK
HM
MW Malawi
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
Mexico
Malaysia
Mozambique
Namibia
New Caledonia (French)
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
HN
HR
HT
HU
ID
IE
IL
IN
IO
Ukraine
Uganda
United Kingdom
USA Minor Outlying
Islands
United States
Uruguay
Uzbekistan
Vatican City State
Saint Vincent &
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (USA)
Vietnam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbabwe
US
UY
UZ
VA
VC
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
KM
KN
KP
KR
KW
KY
KZ
LA
LB
VE
VG
VI
Jordan
Japan
Kenya
Poland
Saint Pierre and Miquelon
Pitcairn Island
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Reunion (French)
Romania
Russian Federation
Rwanda
Saudi Arabia
Solomon Islands
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Kyrgyzstan
Cambodia6
Kiribati
Comoros
Saint Kitts & Nevis Anguilla
North Korea
South Korea
Kuwait
DK
DM
DO
DZ
EC
EE
EG
EH
Cayman Islands
Kazakhstan
Laos
Lebanon
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
AC 120V, 60 Hz
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Signal system
110 W
430 X 81 X 360 mm (17 x 3.2 x 14.2 inches) (w x h x d)
7.2 kg (15.8 lbs)
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
NTSC
Inputs
ANTENNA IN
VCR VIDEO IN
VCR AUDIO IN
Antenna or CATV input, 75 ohms
1 V (p-p) 75 ohms, sync negative, RCA jack x 2
-6.0 dBm more than 47 kohms, RCA jack (L, R) x 2
FM antenna input, 75 ohms
AM antenna input, 300 ohms
Optical connector x 1
FM ANTENNA IN
AM ANTENNA IN
DIGITAL AUDIO IN
Outputs
VIDEO OUT
1 V (p-p) 75 ohms, sync negative
S-VIDEO OUT
(Y) 1.0 V (p-p), 75 ohms, sync negative, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 ohms
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Audio output (analog audio)
RF OUT
(Y) 1.0 V (p-p), 75 ohms, sync negative, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2
2.0 Vrms (1 KHz, 0 dB), 330 ohms, RCA jack (L, R) x 1
Channel 3 or 4 (Adjustable)
VCR Specifications
Head system
Timer
Tape speed
4 head helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
12.7 mm
Tape width
Maximum recording time
Rewind time
SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
About 180 seconds (T-120)
Antenna
75 ohms (VHF/UHF)
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
Channel separation
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
20Hz to 20kHz
More than 43dB
More than 85 dB (AUDIO OUT jacks)
More than 55 dB (AUDIO OUT jacks)
DVD Specifications
Laser system
Frequency response
Signal-to-noise ratio
Harmonic distortion
Dynamic range
Semiconductor laser, wavelength 650 nm
DVD (PCM 48 kHz): 20 Hz to 20 kHz, CD: 20 Hz to 20 kHz
More than 80 dB (AUDIO OUT jacks)
Less than 0.4%
More than 80 dB (AUDIO OUT jacks)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (Continued)
FM Tuner
Tuning Range
87.5 - 108.0 MHz
Intermediate Frequency
10.7 MHz
AM Tuner
Tuning Range
Intermediate Frequency
530 - 1,720 kHz
450 kHz
Amplifier
Stereo mode
70W + 70W (6Ω at 1 kHz, THD 10 %)
Surround mode
Front: 70W + 70W (6Ω at 1 kHz, THD 10 %)
Center*: 70W (6Ω at 1 kHz, THD 10 %)
Surround*: 70W + 70W (6Ω at 1 kHz, THD 10 %)
Subwoofer*: 150W (4Ω at 30 Hz, THD 10 %)
*Depending on the sound mode settings and the source, there may be no sound output.
Inputs
LINE 1, LINE 2, OPTICAL IN
Speakers
Satellite Speaker
2 Way 2 Speaker
6 Ω
Center Speaker
2 Way 2 Speaker
6 Ω
Passive Subwoofer
1 Way 1 Speaker
4 Ω
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
110 - 40,000 Hz
83 dB/W (1m)
90 W
110 - 40,000 Hz
83 dB/W (1m)
90 W
40 - 1,500 Hz
82 dB/W (1m)
150 W
Max. Input Power
180 W
180 W
300 W
Net Dimensions (W x H x D)
Net Weight
120 x 170 x 107 mm
0.94 kg
120 x 252 x 107 mm
1.07 kg
200 x 400 x 381 mm
7.0 kg
Accessories:
Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Ferrite core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
RF 75-ohm Coaxial Cable . . . . . . . . . . . . . . . . . . . . . . . .1
Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Speaker cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
ꢀ This model complies with the above specifications.
ꢀ Designs and specifications are subject to change without notice.
ꢀ This model may not be compatible with features and/or specifications that may be added in the future.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited United States Warranty
for DVD/VCR Home Theater System
Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original consumers
in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER
OR ANY PERSON RECEIVING THIS DVD/VCR HOME THEATER SYSTEM AS A GIFT FROM THE ORIGINAL
CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
DVD/VCR HOME THEATER SYSTEMS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE
U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
DVD/VCR HOME THEATER SYSTEMS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING,
WITHOUT LIMITATION, CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE
WARRANTIES.
Limited Ninety (90) Day Warranty on Labor
TACP warrants this DVD/VCR Home Theater System
and its parts against defects in materials or workman-
ship for a period of ninety (90) days after the date of
original retail purchase. DURING THIS PERIOD, TACP
WILL, AT TACP'S OPTION, REPAIR OR REPLACE A
DEFECTIVE PART WITH A NEW OR REFURBISHED
PART WITHOUT CHARGE TO YOU FOR PARTS OR
LABOR.
Owner's Manual and Product Registration Card
Read this owner’s manual thoroughly before operating
this DVD/VCR Home Theater System.
Complete and mail the enclosed product registration
card or register your DVD/VCR Home Theater System
sible. By registering your DVD/VCR Home Theater
System you will enable TACP to bring you new products
specifically designed to meet your needs and help us to
contact you in the unlikely event a safety notification is
required under the U.S. Consumer Product Safety Act.
Failure to complete and return the product registration
card does not diminish your warranty rights.
Limited One (1) Year Warranty on Parts
TACP further warrants the parts in this DVD/VCR Home
Theater System against defects in materials or work-
manship for a period of one (1) year after the date of
original retail purchase. DURING THIS PERIOD, TACP
WILL, AT TACP'S OPTION, REPAIR OR REPLACE A
DEFECTIVE PART WITH A NEW OR REFURBISHED
PART WITHOUT CHARGE TO YOU FOR THE PART,
PROVIDED THAT IF A DEFECTIVE PART IS
REPAIRED OR REPLACED AFTER NINETY (90) DAYS
AFTER THE DATE OF ORIGINAL RETAIL PURCHASE,
YOU MUST PAY ALL LABOR CHARGES IN CONNEC-
TION WITH THE REPAIR OR REPLACEMENT
THEREOF.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must retain your original bill of sale or provide
other proof of purchase.
(2) All warranty servicing of this DVD/VCR Home
Theater System must be performed by an
Authorized TACP Service Station.
(3) The warranties from TACP are effective only if this
DVD/VCR Home Theater System is purchased and
operated in the Continental U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup,
adjustment of customer controls and installation or
repair of antenna systems are not covered by this
warranty. Reception problems caused by inadequate
antenna systems are your responsibility.
*Rental Units
The warranty for DVD/VCR Home Theater System
rental units begins on the date of the first rental or thirty
(30) days after the date of shipment to the rental firm,
whichever comes first.
*Limited Warranty for Commercial Units
(5) Warranties extend only to defects in materials or
workmanship as limited above, and do not extend to
any DVD/VCR Home Theater System or parts that
have been lost or discarded by you or to damage to
the DVD/VCR Home Theater System or parts
caused by fires, misuse, accident, Acts of God (such
as lightning or fluctuations in electric power),
improper installation, improper maintenance, or use
in violation of instructions furnished by TACP; use or
malfunction through simultaneous use of this
DVD/VCR Home Theater System and connected
equipment; or to units that have been modified or
had the serial number removed, altered, defaced, or
rendered illegible.
TACP warrants DVD/VCR Home Theater Systems that
are sold and used for commercial purposes as follows:
all parts are warranted against defects in materials or
workmanship for a period of ninety (90) days after the
date of original retail purchase. DURING THIS PERIOD,
TACP WILL, AT TACP'S OPTION, REPAIR OR
REPLACE A DEFECTIVE PART WITH A NEW OR
REFURBISHED PART WITHOUT CHARGE TO YOU.
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Obtain Warranty Service
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH MAY VARY FROM STATE TO STATE IN THE
U.S.A. SOME STATES OF THE U.S.A. DO NOT
ALLOW LIMITATIONS ON THE DURATION OF AN
IMPLIED WARRANTY, WHEN AN ACTION MAY BE
BROUGHT, OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
THEREFORE, THE ABOVE PROVISIONS MAY NOT
APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
If, after following all of the operating instructions in this
manual and reviewing the section entitled
"Troubleshooting," you find that service is needed:
(1) To find the nearest TACP Authorized Service
Station, visit TACP's website at
Consumer Solution Center toll free at 1-800-631-
3811.
(2) You must present your original bill of sale or other
proof of purchase to the TACP Authorized Service
Station. You must deliver the entire DVD/VCR
Home Theater System to a TACP Authorized
Service Station. You must pay for all transportation
and insurance charges for the DVD/VCR Home
Theater System to and from the TACP Authorized
Service Station.
For additional information, visit TACP's website:
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A., INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
LIMITED TO THE DURATION OF THE LIMITED WAR-
RANTIES SET FORTH ABOVE. WITH THE EXCEP-
TION OF ANY WARRANTIES IMPLIED BY THE LAW
OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED,
THE FOREGOING WARRANTY IS EXCLUSIVE AND
IN LIEU OF ALL OTHER WARRANTIES, GUARAN-
TEES, AGREEMENTS, AND SIMILAR OBLIGATIONS
OF TACP WITH RESPECT TO THE REPAIR OR
REPLACEMENT OF ANY PARTS.
IN NO EVENT SHALL TACP BE LIABLE FOR CONSE-
QUENTIAL OR INCIDENTAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, LOST PROFITS, BUSINESS
INTERRUPTION, OR MODIFICATION OR ERASURE
OF RECORDED DATA CAUSED BY USE, MISUSE OR
INABILITY TO USE THIS DVD/VCR HOME THEATER
SYSTEM).
No person, agent, distributor, dealer or company is
authorized to change, modify or extend the terms of
these warranties in any manner whatsoever. The time
within which an action must be commenced to enforce
any obligation of TACP arising under the warranty or
under any statute, or law of the United States or any
state thereof, is hereby limited to ninety (90) days from
the date you discover or should have discovered, the
defect. This limitation does not apply to implied war-
ranties arising under the law of any state of the U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
ColorStream and ColorStream Pro
are registered trademarks of Toshiba
America Consumer Products, L.L.C.
P/NO : 3834RH0074C
Printed in Indonesia.
Download from Www.Somanuals.com. All Manuals Search And Download.
|