Toshiba Digital Camera IK 6410A User Manual

INSTRUCTION MANUAL  
EIM -4000086G A.1  
CCD COLOR CAMERA  
IK-6210A/IK-6410A  
Please read this manual thoroughly before use, and keep it handy  
for future reference.  
Record in space provided below the Model # and  
the Serial # as found on the label on the bottom of  
this unit.  
Model #  
Serial #  
Retain this information for future reference.  
TABLE OF CONTENTS  
IMPORTANT SAFEGUARDS........................................ 2  
1. FEATURES AND DESCRIPTION ................................. 4  
2. COMPONENTS ............................................................ 4  
3. PART NAMES AND FUNCTIONS ................................ 5  
4. CAMERA INSTALLATION............................................. 6  
5. CONNECTIONS AND OPERATIONS .......................... 7  
6. LENS ............................................................................ 9  
7. LINE-LOCK PHASE...................................................... 10  
8. AUTOMATIC ELECTRONIC SHUTTER (AES)............. 11  
9. BACKLIGHT COMPENSATION (BLC) ......................... 11  
10. NOTES ON USE AND INSTALLATION ........................ 12  
11. IN CASE OF PROBLEMS ............................................ 12  
12. SPECIFICATIONS ........................................................ 13  
13. EXTERIOR VIEW ......................................................... 15  
00_Cover  
1
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• The CAUTION label, shown on the left,  
is attached on the camera.  
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.  
DO NOT REMOVE COVER (OR BACK).  
NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
The lightening flash with arrowhead  
WARNING :  
symbol, within an equilateral triangle,  
is intended to alert the user to the  
presence of uninsulated “dangerous  
voltagewithin the product’s enclosure  
that may be of sufficient magnitude to  
constitute a risk of electric shock to  
persons.  
TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT EXPOSE  
THIS APPLIANCE TO RAIN OR  
MOISTURE.  
CAUTION :  
CONNECT 24V AC UL LISTED CLASS 2  
POWER SUPPLY.  
The exclamation point within an  
equilateral triangle is intended to alert  
the user to the presence of important  
operating and maintenance (servicing)  
instructions in the literature  
accompanying the appliance.  
FIELD INSTALLATION MARKING :  
THIS INSTALLATION SHOULD BE  
MADE BY A QUALIFIED SERVICE  
PERSON AND SHOULD CONFORMTO  
ALL LOCAL CODES.  
FCC (USA)-INFORMATION  
NOTE : This equipment has been tested and found to comply with the limits for a Class A  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference when the equipment is operated in a  
commercial environment. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instruction manual, may cause  
harmful interference to radio communications. Operation of this equipment in a residential  
area is likely to cause harmful interference in which case the user will be required to correct the  
interference at his own expense.  
USER-INSTALLER CAUTION : Your authority to operate this FCC verified equipment could  
be voided if you make changes or modifications not expressly approved by the party.  
- 3 -  
01_p2-p32  
3
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. FEATURES AND DESCRIPTION  
1. 24V AC/12V DC dual-voltage capable extends power choice.  
2. Camera has the ability to automatically switch the display to color in daylight or black and  
white at night.  
3. Camera synchronization mode is selectable between internal and line-lock.  
4. The shutter speed is automatically adjusted according to the subject brightness.  
5. Back Light Compensation (BLC) adjusts for strong backlight conditions.  
6. White balance is automatically adjusted depending on color temperature variations (AWB)  
7. Easy back focus adjustment for an easy installation.  
8. Built-in 1/3 inch high – resolution CCD. (IK-6410A)  
9. Minimum illumination of 0.2 lux at F1.2. (IK-6210A)  
Minimum illumination of 0.2 lux at F1.0. (IK-6410A)  
10. S/N ratio of 50dB.  
2. COMPONENTS  
(1) Camera .............................................  
(2) Accessories ......................................  
(a) Lens Connector (E.Y.C-221)........  
(b) Instruction Manual .......................  
(c) Lens Cap .....................................  
1
1
1
1
1
- 4 -  
01_p2-p32  
4
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. PART NAMES AND FUNCTIONS  
- 5 -  
01_p2-p32  
5
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. CAMERA INSTALLATION  
Wall  
9.5 (0.37)  
Installation Example  
1/4"-20UNC  
112 (4.41)  
15 (0.59)  
The Installation example is for reference only.  
Mounting bracket is not included.  
Dimensions : mm (inch)  
- 6 -  
01_p2-p32  
6
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. CONNECTIONS AND OPERATIONS  
Notes on connecting  
• Power plugs of connected equipment must be disconnected before camera  
installation.  
• A 75-ohm coaxial cable with connector (3C-2V or 5C-2V) is required for standard  
connection.  
• For details of wiring and operation of equipment to be connected, refer to their  
operation manuals.  
• Lens, power supply with cable, connectors and coaxial cable are not supplied with  
the camera.  
5-1. Basic connection Single system configuration  
MONITOR TV  
CAMERA  
24V AC UL Listed Class 2 power supply  
or  
12V DC power supply  
120V AC  
(*) Recommend power cord is twisted pair line  
with a minimum wire size of 18 AWG.  
CAUTION: Never input 24V AC and 12V DC at the same time.  
Do not overload power supply  
The recommended power supplies for this camera are 6 watt minimum for each 24V  
AC UL Listed Class 2 power supply or 12V DC power supply.  
- 7 -  
01_p2-p32  
7
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-2. Line-Lock Control  
• Matching the vertical synchronization with the power frequency is called the Line-Lock.  
• This function is activated when the LL switch is set to ON.  
ON  
OFF  
LL  
• When two or more cameras are switched by the video switcher for viewing by a monitor TV, the  
vertical sync.phase can be locked to the power frequency, and a stable vertical sync. is obtained  
without being disturbed at the time of switching.  
MONITOR TV  
CAMERA1  
CAMERA2  
VIDEO SWITCHER  
TO 24V AC UL Listed  
Class 2 power supply  
Note:  
• The camera is synchronized to the power frequency of 60 1 Hz covering a normal fluctuation of  
the power frequency. However, the camera may not cover a large fluctuation caused from the  
power generated by an engine generator, etc.  
• It takes about 10 seconds or more until a stable synchronization is obtained after the power is  
turned on.This is normal, because several seconds are required to stabilize the camera against  
power noise.  
• Refer to "7. LINE-LOCK PHASE" for adjustment.  
5-3. Operation  
1. Mount the lens to the camera.  
2. Mount the camera to the camera mount.  
Caution: If the lens weight is more than 2.2 lbs (1 kg) mount the lens to the camera mount.  
Refer to section 6 for lens types and connection.  
3. Connect the cables and support equipment to obtain a picture.  
4. Adjust the lens aperture (if applicable).  
- 8 -  
01_p2-p32  
8
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. LENS  
Back-Focus Adjusment  
Back-Focus is adjusted at the factory to accommodate most standard lenses.  
Sometimes, slight adjustment to the camera back-focus is  
necessary.  
Focus Lock Screw  
Loosen the Focus Lock Screw. Achieve a clear image by  
rotating the focus ring.  
Tighten the Focus Lock Screw.  
Focus ring  
IRIS  
Auto-iris Lens  
This camera supports two types of auto-iris lens: Video  
and DC (direct drive) types. Connect the auto-iris  
connector plug to the IRIS terminal on the side of the  
camera. Refer to the chart below for correct wiring and  
Auto-iris lens  
2
4
1
Video IRIS  
Lens  
Direct Drive  
IRIS Lens  
1
2
3
4
+12V  
Damp – (y)  
IRIS terminal  
pin  
NC  
Damp + (γ)  
Driver + (wh)  
Driver – (g)  
VIDEO  
GND  
3
Camera Side  
IRIS Switch  
VIDEO position DC position  
- 9 -  
01_p2-p32  
9
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. LINE-LOCK PHASE  
If two or more cameras within a system have  
different AC line phases are switched by the video  
switcher, the picture on the monitor TV will fluctuate  
vertically.  
Connect 24V AC input lines of all cameras so that  
they all share the same phase.  
If you still have vertical fluctuation, adjust the  
V.PHASE controller.  
V. PHASE CONTROLLER  
Note:  
• Refer to “5-2. Line-Lock Control”.  
- 10 -  
01_p2-p32  
10  
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. AUTOMATIC ELECTRONIC SHUTTER (AES)  
Exposure time is controlled automatically within a range of 1/60 sec. to 1/100000 sec. to obtain an  
adequate signal when the IRIS switch is moved to AES.  
When the back panel switch is turned to VIDEO or DC, the exposure time is fixed 1/60 sec.  
9. BACKLIGHT COMPENSATION (BLC)  
To activate backlight compensation, set the BLC switch to ON.  
ON  
OFF  
BLC  
When the automatic electronic iris feature is used with an auto iris lens, the exposure adjustment  
is automatically performed so that a best picture is obtained at a monitor zone of about 50% in  
horizontal and about 50% in vertical direction.  
This function is effective when a strong light enters the portion other than this zone and auto iris  
lens closes and darkens the area to view.  
(Monitor screen)  
50%  
50%  
- 11 -  
01_p2-p32  
11  
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. NOTES ON USE AND INSTALLATION  
• Do not aim the camera at the sun  
Never aim the camera at the sun even with the camera power off.  
• Do not shoot intense light  
Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on  
the screen. However, this is not a malfunction.  
• Treat the camera with care  
Do not drop the camera or subject it to intense vibration.  
• Never touch internal parts  
Do not touch the internal parts of the camera other than the parts specified.  
• Do not splash water on the camera  
Install the camera where the camera can be kept dry. If the camera gets wet, turn off the power  
and contact your dealer.  
• Keep the camera installation away from video noise  
If cables are wired near electric lighting wires or a TV set, noise may appear in images. In this  
event, relocate cables or reinstall equipment.  
• Check the ambient temperature and humidity  
Avoid using the camera where the temperature is hotter or colder than the specified operating  
range. Doing so could affect the internal parts or cause the image quality to deteriorate. Special  
care is required to use the camera at high temperature and humidity.  
• Should you notice any trouble  
If any trouble occurs while you are using the camera, turn off the power and contact your dealer.  
If you continue to use the camera when there is something wrong with it, the trouble may get  
much worse and an unpredictable problem may occur.  
11. IN CASE OF PROBLEMS  
Condition  
Check Point  
Are the camera and connected equipment turned on?  
Is the iris of the lens adjusted properly?  
Are cables connected correctly?  
No image  
Is the monitor TV adjusted correctly?  
Is the lighting too dim?  
Unnatural color  
- 12 -  
01_p2-p32  
12  
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. SPECIFICATIONS  
IK-6210A  
24V AC ~ 10% 60Hz / 12V DC  
Power  
10%  
Power consumption  
Image sensor  
3.5W with Al lens  
1/3 inch CCD image sensor  
Image pickup area  
Effective picture element  
Scanning system  
Scanning frequency  
Synchronization  
Resolution  
0.194 inch (4.92 mm) horizontal x 0.145 inch (3.69 mm) vertical  
510 horizontal x 492 vertical  
2:1 interlace NTSC Standard TV system  
15.75 KHz horizontal 60 Hz vertical  
Line-Lock, Internal manually switchable  
350 Horizontal TV lines  
Minimum illuminance of subject 0.2 lux (F1.2, More than 10% of image output γ = 0.45)  
S/N  
50 dB or more (weight ON)  
Video output  
VBS 1.0 V p-p / 75 ohms, composite  
75 ohms unbalanced  
Output impedance  
White balance  
Iris control  
Automatic (2500 K to 10,000 K)  
Video Out / Iris Driver Circuit Built in  
Average AGC (26 dB)  
Gain control  
Backlight compensation  
Lens mount  
Manual ON/OFF switching, center zone light measuring system  
CS mount  
Ambient temperature  
Ambient humidity  
Weight  
14˚F to 122˚F (-10˚C to +50˚C)  
20% to 80%  
0.77 lbs (350 g)  
External dimensions  
Automatic electronic shutter  
2.48(W) x 1.97(H) x 4.57(D) inches (63(W) x 50(H) x 116(D) mm)  
ON (1/60 s to 1/100000 s) /OFF (1/60 s)  
- 13 -  
01_p2-p32  
13  
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IK-6410A  
24V AC ~ 10% 60Hz / 12V DC  
Power  
10%  
Power consumption  
Image sensor  
3.5W with Al lens  
1/3 inch CCD image sensor  
Image pickup area  
Effective picture element  
Scanning system  
Scanning frequency  
Synchronization  
Resolution  
0.194 inch (4.92 mm) horizontal x 0.145 inch (3.69 mm) vertical  
771 horizontal x 492 vertical  
2:1 interlace NTSC Standard TV system  
15.75 KHz horizontal 60 Hz vertical  
Line-Lock, Internal manually switchable  
480 Horizontal TV lines  
Minimum illuminance of subject 0.2 lux (F1.0, More than 10% of image output γ = 0.45)  
S/N  
50 dB or more (weight ON)  
Video output  
VBS 1.0 V p-p / 75 ohms, composite  
75 ohms unbalanced  
Output impedance  
White balance  
Iris control  
Automatic (2500 K to 10,000 K)  
Video Out / Iris Driver Circuit Built in  
Average AGC (26 dB)  
Gain control  
Backlight compensation  
Lens mount  
Manual ON/OFF switching, center zone light measuring system  
CS mount  
Ambient temperature  
Ambient humidity  
Weight  
14˚F to 122˚F (-10˚C to +50˚C)  
20% to 80%  
0.77 lbs (350 g)  
External dimensions  
Automatic electronic shutter  
2.48(W) x 1.97(H) x 4.57(D) inches (63(W) x 50(H) x 116(D) mm)  
ON (1/60 s to 1/100000 s) /OFF (1/60 s)  
- 14 -  
01_p2-p32  
14  
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. EXTERIOR VIEW  
Dimensions : mm (inch)  
- 15 -  
01_p2-p32  
15  
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
CCD SECURITY CAMERA IK-6210A/IK-6410A  
The Imaging System Division ("ISD") of Toshiba America Information Systems, Inc. makes the following limited warranties with regard to  
this CCD Camera Model IK-6210A/IK-6410A ("Product"). These limited warranties extend to the Original End-User ("You[r]").  
Three (3)Year Limited Warranty of Labor and Parts ISD warrants that this Product will perform in accordance with specifications for a  
period of three (3) years from the date of purchase by the Original End-User.During this three (3) year period, ISD will repair or replace the  
Product, if it does not perform as warranted. In order to take advantage of this Limited Warranty. You must: (a) call (877) 855-1349 to  
receive a RMA number: and (b) pay all transportation and insurance charges for shipment of the Product to the ASP or Toshiba Exchange  
Center. ISD reserves the right to substitute factory refurbished parts in place of those in need of repair.  
Instruction Manual (Owner's Manual): You should read the Instruction Manual (Owner's Manual) thoroughly before operating this  
Product. Before seeking warranty service, you should check the troubleshooting guide in the Instruction Manual (Owner's Manual) and  
follow the instructions to correct the problem.  
How to Obtain Warranty Service Step-by-step Procedures: To obtain warranty service.You should:  
1. Contact Toshiba at (877) 855-1349 to first verify operation or installation assistance. (877) 855-1FIX  
2. If technical support determines that the unit is defective, an RMA will be issued with return instructions for repair.  
3. Securely pack the Product in the original carton and external shipping pack, include a letter explaining the problem with a copy of the  
bill of sale or proof of purchase.  
4. Prepay all transportation and insurance costs.  
Your Responsibilities: This Limited Warranty is subject to the following conditions:  
1. You must provide the bill of sale or proof of purchase at the time that warranty service is required.  
2. You must notify (877) 855 1349 within (30) days after you discover that the product does not perform in accordance with specifications  
during the Limited Warranty period.  
3. You must pack the Product in its original carton using the original packing material. Then insert the original carton containing the  
Product into another carton with additional packing material before shipping the Product to an ASP or Toshiba Exchange Center.  
DISCLAIMERS: ALL OTHER EXPRESS OR IMPLIEDWARRANTIES ONTHIS PRODUCT, INCLUDINGTHE IMPLIEDWARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. SOME STATES DO NOT  
ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS. SO  
THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.  
IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE AND EXCLUSIVE REMEDY  
SHALL BETHE REPAIR OF REPLACEMENT OFTHE PRODUCT. IN NO EVENTWILL ISD OR ITS PARENT COMPANY OR ANY ASP  
BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT.  
THIS LIMITATION APPLIES TO DAMAGES OF ANY KIND, INCLUDING ANY DIRECT OR INDIRECT DAMAGES, LOST PROFITS,  
LOST SAVINGS OR OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, WHETHER FOR BREACH  
OF CONTRACT,TORT OR OTHERWISE, OR WHETHER ARISING OUT OF THE USE OF OR INABILITY TO USE SUCH PRODUCT,  
EVEN IFTAIS, ITS PARENT COMPANY, OR AN ASP HAS BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES OR OF ANY  
CLAIM BY ANY OTHER PARTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES FOR SOME PRODUCTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO  
YOU.  
THIS WARRANTY GIVESYOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM  
STATE TO STATE.  
THIS LIMITED WARRANTY SHALL BE VOID IF THE PRODUCT OR PARTS HAVE BEEN SUBJECTED TO MISUSE, ABUSE,  
ACCIDENT, IMPROPER INSTALLATION, IMPROPER MAINTENANCE, OR USE INVIOLATION OF ISD'SWRITTEN INSTRUCTIONS,  
OR WHERE THE PRODUCT HAS BEEN ALTERED OR MODIFIED WITHOUT ISD'S PRIOR AUTHORIZATION, OR UPON THE  
REMOVAL OR ALTERATION OF ISD'S FACTORY SERIAL NUMBER.LABOR SERVICE CHARGES FOR PRODUCT INSTALLATION,  
SET UP AND ADJUSTMENT OF CONTROLS ARE NOT COVERED BY THIS LIMITED WARRANTY  
No person, agent, distributor, dealer, authorized service provider, or company is authorized to change, modify, or extend the terms of this  
Limited Warranty in any manner whatsoever.The time within which an action must be commenced to enforce any obligation of ISD arising  
under this Limited Warranty or under any statute, or law of the United States or any state thereof, is herby limited to one (1) year from the  
date You discovered or should have discovered the problem. This limitation does not apply to implied warranties arising under state law.  
Some states do not permit limitation of the time within whichYou may bring an action beyond the limits provided by state law, so the above  
provision may not apply to You. This Limited Warranty gives You specific legal rights and You may also have other rights which vary from  
state to state.  
TOSHIBA AMERICA INFORMATION SYSTEMS, INC.  
Imaging Systems Division  
01_p2-p32  
16  
06.8.7, 11:08 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Taylor Blender BW11 User Manual
Toshiba DVD Player DKR40 User Manual
Toshiba Personal Computer PSA20 User Manual
TP Link Network Router TL R460 User Manual
Vector Air Compressor 90551961 User Manual
Velodyne Acoustics Speaker DPS 10 User Manual
Viking Oven F20941B User Manual
VTech Cell Phone LS5105 User Manual
VTech Cordless Telephone DS6151 User Manual
VXI Switch EX7000 User Manual