DVD PLAYER
OWNER’S MANUAL
MODEL : SD-K615
Surround
3D
Sound
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE
MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
15. Attachments
Only use attachments/accessories specified by the manufacturer.
16. Accessories
Use only with the cart, stand, tripod, bracket, or
This set has been designed and manufactured to assure personal safety.
Improper use can result in electric shock or fire hazard. The safeguards
incorporated in this unit will protect you if you observe the following proce-
dures for installation, use, and servicing.
This unit does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE
EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
table specified by the manufacturer or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
PORTABLE CART
WARNING
17. Disc Tray
Keep your fingers well clear of the disc tray as it is closing. It can
cause personal injury.
18. Burden
Do not place a heavy object on or step on the product. The object
may fall, causing serious personal injury and serious damage to the
product.
1. Read These Instructions
All safety and operating instructions should be read before the
product is operated.
19. Connecting
2. Follow All Instructions
All operating and use instructions should be followed.
3. Keep These Instructions
The safety and operating instructions should be retained for future
reference.
4. Heed All Warnings
When you connect the product to other equipment, turn off the
power and unplug all of the equipment from the wall outlet. Failure
to do so may cause an electric shock and serious personal injury.
Read the owner’s manual of the other equipment carefully and fol-
low the instructions when making any connections.
20. Sound Volume
All warnings on the product and in the operating instructions should
be adhered to.
5. Power Sources
Reduce the volume to the minimum level before you turn on the
product. Otherwise, sudden high volume sound may cause hearing
or speaker damage.
This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supply in your home, consult your product dealer or
local power company. For products intended to operate from bat-
tery power, or other sources, refer to the operating instructions.
6. Grounding or Polarization
21. Sound Distortion
Do not allow the product to output distorted sound for a longtime. It
may cause speaker overheating and fire.
22. Earphone
When you use the earphone, keep the volume at a moderate level.
If you use the earphone continuously with high volume sound, it
may cause hearing damage.
Do not defeat the safety purpose of the polarized plug has two
blades with one wider than the other. A grounding-type plug has
two blades and a third grounding prong. The wide blade or the
prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obso-
lete outlet.
23. Laser Beam
Do not look into the opening of the disc tray or ventilation opening
of the product to see the source of the laser beam. It may cause
sight damage.
24. Disc
7. Ventilation
Do not use a cracked, deformed, or repaired disc. These discs are
easily broken and may cause serious personal injury and product
malfunction.
Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from over-
heating. These openings must not be blocked or covered. The open-
ings should never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless proper ventila-
tion is provided or the manufacturer’s instructions have been adhered
to.
25. Damage Requiring Service
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normal, or has been dropped.
8. Heat
Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that produce
heat.
26. Servicing
Do not attempt to service this product yourself as opening or
removing the cover may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
9. Water and Moisture
Do not use this apparatus near water. For example: near a bath
tub, wash bowl, kitchen sink, Laundry tub, in a wet basement; or
near a swimming pool.
27. Replacement parts
10. Cleaning
When replacement parts are required, be sure the service techni-
cian has used replacement parts specified by the manufacturer or
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Clean only with dry cloth.
11. Power-Cord Protection
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
28. Safety Check
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
12. Overloading
Do not overload wall outlets, extension cords, or integral conven-
ience receptacles, this can result in a risk of fire or electric shock.
13. Lightning
Unplug this apparatus apparatus during lightning storms or when
unused for long periods of time. This will prevent damage to the
product due to lightning and power-line surges.
14. Object and Liquid Entry
Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of any kind
on the product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Programmed Playback with Video CD
and Audio CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Programmed Playback with Video CD
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel and Display Window . . . . . . . . . . . . . . 7
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
and Audio CD . . . . . . . . . . . . . . . . . . . . . . . . . . 20
ꢀ Repeat Programmed Tracks/All . . . . . . . . . . 20
ꢀ Erasing a Track from Program List. . . . . . . . 20
ꢀ Erasing the Complete Program List . . . . . . . 20
Operation with MP3 Disc. . . . . . . . . . . . . . . . . . . . 21
Playing an MP3 Disc . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Moving to another Track . . . . . . . . . . . . . . . 21
ꢀ Repeat Track/All/Off. . . . . . . . . . . . . . . . . . . 21
Notes on MP3 Discs . . . . . . . . . . . . . . . . . . . . . 21
Programmed Playback with MP3 Disc . . . . . . . . . 22
Programmed Playback with MP3 Disc . . . . . . . . 22
ꢀ Repeat Programmed Tracks/All . . . . . . . . . . 22
ꢀ Erasing a Track from Program List. . . . . . . . 22
ꢀ Erasing the Complete Program List . . . . . . . 22
Additional Information . . . . . . . . . . . . . . . . . . . . . 23
Last Condition Memory . . . . . . . . . . . . . . . . . . . 23
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 23
Dimmer Function . . . . . . . . . . . . . . . . . . . . . . . . 23
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . 10
Connecting to Optional Equipment . . . . . . . . . . . 11
Before Operation . . . . . . . . . . . . . . . . . . . . . . . 12-15
General Explanation. . . . . . . . . . . . . . . . . . . . . . 12
On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 12
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 13-15
ꢀ Initial Settings General Operation. . . . . . . . . 13
ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ꢀ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ꢀ Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 15
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 25
Area Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Operation
Operation with DVD, Video CD and Audio CD. 16-19
Playing a DVD, Video CD and Audio CD . . . . . . 16
ꢀ Exchanging discs during playback . . . . . . . . 16
ꢀ Skipping discs . . . . . . . . . . . . . . . . . . . . . . . 16
ꢀ Exchanging the disc and starting playback. . 16
General Features. . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Moving to another TITLE . . . . . . . . . . . . . . . 17
ꢀ Moving to another CHAPTER/TRACK . . . . . 17
ꢀ Still Picture and Frame-by-Frame Playback . 17
ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Selecting the sound enhancement . . . . . . . 18
ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Marker Search. . . . . . . . . . . . . . . . . . . . . . . 19
Special DVD Features . . . . . . . . . . . . . . . . . . . . 19
ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Changing the Audio Language. . . . . . . . . . . 19
ꢀ Changing the Audio Channel . . . . . . . . . . . . 19
ꢀ Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Others
LIMITED WARRANTY DVD VIDEO PLAYER. . . 28-29
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Disc-related terms
Title (DVD only)
Playable Discs
The main film content or accompanying feature content
or additional feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
DVD Video
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles.
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a CD-R or CD-RW that
contains audio titles or MP3 files.
A title is composed of one or several chapters. Each
chapter is assigned a chapter number, enabling you to
locate the chapter you want. Chapter numbers may not
be recorded on all discs.
Notes
– Depending on the conditions of the recording equip-
ment or the CD-R/RW disc itself, some CD-R/RW
discs cannot be played on this unit.
– This unit cannot play CD-R/RW discs that do not con-
tain any data, or contain different kinds of formatted
data other than MP3 and CD-DA data.
– Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
– Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal). It may result in malfunctions.
Track (Video CD and audio CD only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Scene
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into sec-
tions called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
A scene is composed of one or several tracks.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be avail-
able, or other functions may be added.
Refer also to the instructions supplied with the DVDs
and Video CDs. Some DVDs made for business pur-
poses may not be playable on this unit.
Types of video CDs
There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc.
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured
for playback of region “1” encoded DVD soft-
ware. The region code on the labels of some DVD discs
indicates which type of player can play those discs. This
unit can play only DVD discs labeled “1” or “ALL”. If you
try to play any other discs, the message “Check Regional
Code” will appear on the TV screen. Some DVD discs
may not have a region code label even though their
playback is prohibited by area limits.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
1
Note on DTS-encoded CDs
To avoid possible damage to the audio system, turn
down the volume before playing back such discs. Adjust
the volume gradually to personal preference. To enjoy
DTS Digital SurroundTM playback, an external 5.1 chan-
nel DTS Digital SurroundTM decoder system must be
connected to the digital output of the player.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Cont’d)
Precautions
Storing discs
After playing, store the disc in its case.
Handling the unit
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature build-
up inside the car.
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
Cleaning discs
When setting up the unit
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, and turn off
the unit after removing the disc.
To keep the exterior surfaces clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not allow rubber or plastic products to
contact the unit for a long period of time. They will leave
marks on the surface.
To move the unit
When you move the player, take out any discs. If you
don’t, the discs may be damaged or drop into the inter-
nal workings of the DVD player.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
Cleaning the unit
About Symbols
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents, such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
About the
symbol display
“
” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not available on that specific DVD video disc.
To obtain a clear picture
About the disc symbols for instructions
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
When a section in this manual includes the following
icons, the data provided herein is applicable only to the
software represented by that icon.
DVD DVD
VCD2.0
VCD1.1
CD
Video CDs with the PBC (playback control)
function.
For details, please contact your nearest dealer.
Video CDs without the PBC (playback control)
function.
Notes on Discs
Audio CDs.
Handling discs
MP3 MP3 disc.
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel and Display Window
ON/STANDBY indicator
Lights red when the player is in Standby mode (off).
PLAY ( 2)
Starts playback.
STOP ( 9)
Stops playback.
CLEAR
REPEAT
Repeat chapter,
track, title, Disc,
all.
Removes a track number
in the program menu or
a mark on the MARKER
SEARCH menu.
PAUSE ( ; )
Pauses playback temporarily /
press repeatedly for frame-by-frame playback.
RANDOM
Plays tracks
in random
order.
Remote Sensor
Point the DVD Player
remote control here.
ZOOM
Enlarges video image.
DISC SKIP
Moves to the next available disc tray.
Display window
Shows the current status of the player.
EX-CHANGE
Changes a disc (other than the one playing) during playback
Disc Tray
Insert a disc here.
E.A.M.
Select sound mode during disc playback.
Disc number (1 - 5)
Selects a disc tray for playback.
Reverse Skip ( S)
Returns to beginning of current chapter/track or to
PREVIOUS chapter/track.
Press and hold for two seconds for fast reverse
search.
Forward Skip ( T)
Advances to NEXT chapter/track.
Press and hold for two seconds for fast forward search.
ON/STANDBY
Switches the player ON and OFF.
OPEN/CLOSE ( /)
Opens or closes the disc tray.
ANGLE Lights when multi angles
TITLE Indicates current title number
are present.
CHP/TRK Indicates current chapter or track number
Indicates total playing time/elapsed time
PROG. Programmed playback active
A light will appear if a disc is in the disc
tray. The current disc tray flashes.
DVD
DVD inserted
CD Audio CD inserted
VCD Video CD inserted
MP3 MP3 disc inserted
RANDOM RANDOM play-
back active
Indicates repeat
mode
Indicates current player function:
Playback, Pause, etc.
MP3 VCD
CD DVD
TITLE
CHP/TRK
PROG.
RANDOM ALL
A
B
1
2
3
4
5
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
OPEN/CLOSE
POWER
Opens and closes the disc tray.
Switches DVD Player ON and OFF.
ZOOM
GUI DISPLAY
Enlarges video image.
Accesses on-screen display
E.A.M.
SETUP
Selects sound mode during disc
playback.
Accesses or closes setup menu.
TOP MENU
Displays the Title menu of the disc if
available.
MENU
Accesses menu on a DVD disc.
ENTER
Confirms menu selection.
1 2 3 4 (left/right/up/down)
Selects an item in the menu.
RETURN
CLEAR
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
- Removes the setup menu.
- Displays the menu of a video CD
with PBC.
• Reverse SCAN ( Q )
Search backward.
PAUSE/STEP ( X / C) •
Pauses playback temporarily / press
repeatedly for frame-by-frame
playback.
• PLAY ( 2)
Starts playback.
• Forward SCAN ( R )
STOP ( 9) •
Stops playback.
Search forward.
PROGRAM
Accesses or removes Program
menu.
Forward SKIP ( T ) •
Advances to next chapter or track.
Reverse SKIP ( S ) •
Returns to beginning of current
chapter or track or go to previous
chapter or track.
SEARCH
Displays MARKER SEARCH menu.
0-9 number buttons
Selects numbered items in a menu.
ANGLE •
Selects a DVD camera angle if
available
• Reverse SLOW ( , )
Reverse slow playback.
• Forward SLOW ( . )
Forward slow playback.
SUBTITLE •
Selects a subtitle language.
• DISC SKIP
AUDIO •
Selects an audio language (DVD) or
an audio channel (CD).
Moves to the next available disc tray.
• RANDOM
Plays tracks in random order.
FL DIM •
Controls the Display Window’s light.
• MARKER
Marks any point during playback.
• REPEAT
Repeat chapter, track, title, all.
• A-B RPT
Repeat sequence.
Remote Control Operation Range
Remote control battery installation
Point the remote control at the remote sensor and press
the buttons.
Detach the battery cover on the rear of
the remote control, and insert two R03
ꢀ Distance: About 23 ft (7 m) from the front of the
remote sensor
(size AAA) batteries with
aligned correctly.
and
ꢀ Angle: About 30° in each direction of the front of the
remote sensor
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
VIDEO OUTPUT Switch
Select either S-VIDEO or COMPONENT, depending on
how you connect DVD Player to the TV.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
COMPONENT VIDEO OUT (Y PB PR)
Connect to a TV with Y PB PR inputs.
VIDEO OUT
Connect to a TV with video inputs.
AC Power Cord
Plug into the power source.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
ANALOG AUDIO OUT (Left/Right) 1, 2
Connect to an amplifier, receiver or stereo system.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
Dust protection cap
Remove the dust protection cap from the OPTICAL
DIGITAL OUT jack and connect the optical digital cable
(not supplied) securely so that the configurations of
both the cable and the connector match. Keep the dust
protection cap and always reattach the cap when not
using the connector to protect against dust intrusion.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
Dust protection cap
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Rear of TV
Tips
ꢀ Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
described below.
S-VIDEO
INPUT
VIDEO
INPUT
AUDIO INPUT
COMPONENT VIDEO INPUT
P
R
Y
PB
R
L
ꢀ Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
ꢀ For better sound reproduction, connect the player’s
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See “Connecting to optional equipment” on page 11.
A
V
C
S
Caution
–
Make sure the DVD Player is connected directly to the
TV. Select the TV to the corresponding video input.
– Do not connect the DVD Player’s AUDIO OUT jack to
the phono in jack (Turntable) of your audio system.
– Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
system.
Connecting to a TV
ꢀ Make one of the following connections, depending on
the capabilities of your existing equipment.
ꢀ When using the COMPONENT VIDEO OUT jacks,
set the VIDEO OUTPUT switch to COMPONENT.
When using the S-VIDEO OUT jack, set the VIDEO
OUTPUT switch to S-VIDEO.
Rear of DVD player
Note
If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable,
do not connect the yellow video cable.
Video connection (Good)
Connect the VIDEO OUT jack on the DVD Player to
1
the video in jack on the TV using the video cable
supplied (V).
Connect the Left and Right AUDIO OUT jacks of
2
the DVD Player to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
S-Video connection (Better)
Connect the S-VIDEO OUT jack on the DVD Player
1
to the S-Video in jack on the TV using an optional
S-Video cable (S).
Connect the Left and Right AUDIO OUT jacks of
2
the DVD Player to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
®
Component Video (Color Stream ) connection (Best)
Connect the COMPONENT VIDEO OUT jacks on
1
the DVD Player to the corresponding in jacks on
the TV using an optional Y PB PR cable (C).
Connect the Left and Right AUDIO OUT jacks of
2
the DVD Player to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Cont’d)
Rear of DVD player
Connecting to Optional Equipment
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver or stereo system, using the supplied
audio cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 or DTS)
O
A
X
Connect one of the DVD Player’s DIGITAL AUDIO
1
OUT jacks (OPTICAL O or COAXIAL X) to the cor-
responding in jack on your amplifier. Use an option-
al digital (optical O or coaxial X) audio cable.
R
L
OPTICAL
COAXIAL
You will need to activate the player’s digital output.
DIGITAL INPUT
AUDIO INPUT
DIGITAL INPUT
2
(See “Digital Audio Output” on page 14).
Amplifier (Receiver)
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Note
This player does not perform internal (2 channel)
decoding of a DTS sound track. To enjoy DTS
multi channel surround, you must connect this player to
a DTS compatible receiver via one of this player’s
digital audio outputs.
Notes
–
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound can only be
obtained if your receiver is equipped with a Digital
Multi-channel surround sound decoder.
– To confirm the audio format of the current DVD
selection display, press AUDIO.
– Repeated pressing of the AUDIO button may allow
you to select between various audio formats available
on the disc.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
Repeat mode Icons
General Explanation
This manual gives basic instructions for operating the
DVD Player. Some DVDs require specific operation or
allow only limited operation during playback. When this
TITLE
Repeat Title
CHAPT
Repeat Chapter
TRACK
Repeat Track (non-PBC Video CDs
occurs, the symbol
appears on the TV screen, indi-
and Audio CD only)
cating that the operation is not permitted by the DVD
Player or is not available on the disc.
ALL
Repeat All Tracks (non-PBC Video CDs
and Audio CD only)
On-Screen Display
General playback status can be displayed on the TV
A
B
Repeat A-B
OFF
Repeat Off
screen. Some items can be changed on the menu.
Resume play from this point
Action prohibited or not available
On-screen display operation
Press GUI DISPLAY during playback.
Notes
1
2
ꢀ Some discs may not provide all of the features includ-
ed on the on-screen display example shown below.
ꢀ If no button is pressed for 10 seconds, the on-screen
display disappears.
Press 3or 4to select an item.
The selected item will be highlighted.
Press 1or 2to change the setting of an item.
3
The number buttons can be also be used for setting
numbers (e.g., title number). For some functions,
press ENTER to execute the setting.
DVD
Items
Function (Press 3
/
4to select desired item)
Selection Method
Title Number
Displays the current title number and total number of
1 / 2, or
Numbers, ENTER
1/3
1/12
available titles, and skips to a desired title number.
Chapter Number
Time search
Displays the current chapter number and total number of
available chapters, and skips to a desired chapter number.
1 / 2, or
Numbers, ENTER
Displays the elapsed playing time, and
searches a point identified by its elapsed time.
Numbers, ENTER
0:16:57
Audio language
and Digital Audio
Output mode
Displays the current audio soundtrack language,
encoding method and channel number, and
any changes you make to the setting.
1
ENG
D
6 CH
1
/
2
Subtitle language
Displays the current subtitles language, and
OFF
1/1
1
1
/
/
2
2
any changes you make to the setting.
Angle
Displays the current angle number and total number of
angles, and any changes you make to the angle number.
Sound
Displays the current sound mode, and
any changes you make to the setting.
NORM.
1
/
2
VCD1.1
VCD2.0
CD
Items
Function (Press 3
/
4to select desired item)
Selection Method
Track Number
Displays the current track number, total number of tracks
and PBC On mode, and skips to the desired track number.
1
/
2
, or
1/4
Numbers, ENTER
Time
Displays the elapsed playing time (Display only)
0:16:57
–
Audio Channel
Sound
Displays the audio channel, and
STER.
1
1
/
/
2
2
changes you make to the audio channel.
Displays the current sound mode, and
changes you make to the setting.
NORM.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Cont’d)
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SETUP.
Initial Settings
You can install your own Personal Preferences.
Initial Settings General Operation
English
Spanish
French
Disc Audio
Disc Subtitle
Disc Menu
Press SETUP.
1
The setup menu appears.
Rating
Area Code
TV Aspect
Original
English
Disc Audio
Menu Language
Digital Audio Output
Disc Subtitle
Disc Menu
French
Rating
German
Spanish
Italian
Area Code
TV Aspect
Others
Menu Language
Digital Audio Output
Chinese
Polish
Hungarian
Russian
Other — — — —
Picture
Others
TV Aspect DVD
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both side of the original picture may be cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.
Press 3/4to select the desired item.
The screen will display the current setting for the
selected item, as well as alternate setting(s).
2
While the desired item is displayed, press 2,
then 3/4to select the desired setting.
3
4
5
Press ENTER to confirm your selection.
Some items require additional steps.
Press SETUP, RETURN or PLAY to exit the
setup menu.
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Disc Subtitle
Disc Menu
Rating
Language
Area Code
TV Aspect
Menu Language
Digital Audio Output
Disc Language DVD
Select a language for the disc’s Menu, Audio and
Subtitle.
Original : The original language included on the disc is select-
ed.
Others
Other : To select another language, enter the 4-digit number
corresponding to the language code list on page 25. If you
enter the wrong language code, press CLEAR.
Original
English
Disc Audio
Disc Subtitle
Disc Menu
French
Rating
German
Spanish
Italian
Area Code
TV Aspect
Menu Language
Digital Audio Output
Chinese
Polish
Hungarian
Russian
Other — — — —
Others
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Cont’d)
Dynamic Range Control (DRC)
Sound
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
Digital Audio Output
Each DVD disc may have a variety of audio output
options. Set the player’s Digital Audio Output according
to the type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”
if you connect the DVD Player’s DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equip-
ment with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if you connect the
DVD Player’s DIGITAL OUT jack to an amplifier or other
equipment with a DTS decoder, Dolby Digital decoder
or MPEG decoder.
PCM: Select when connected to a 2 channel digital
stereo amplifier. The DVD player outputs sounds in the
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1 or MPEG2
recording system.
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio
CDs.
DOLBY
DIGITAL /PCM
Stream/PCM
PCM
Disc Audio
Disc Subtitle
Disc Menu
Rating
B.L.E. (Black Level Expansion)
Area Code
Sample Freq.
48 KHz
TV Aspect
To select the black level of playback pictures. Set your
preference and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
Menu Language
Digital Audio Output
96KHz
Others
Pluge (Blacker than Black)
Sample Frequency
For proper adjustment of your television brightness
settings utilizing a commercially available test disc.
On: Select when you adjust the level of your TV using a
commercially available test disc that contains pluge
signals.
To change the Sample Frequency setting, first select
the desired Digital Audio Output as indicated above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass all signals through without
down conversion, or processing.
Off: For normal use.
DNR (Digital Noise Reduction)
You can reduce ambient noise in the picture.
DNR1: Normal level
DNR2: Expanded level.
Off:
Off.
Others
The DRC, Vocal, PBC, B.L.E., Pluge and DNR settings
can be changed.
ꢀ Press 3/4to select the desired item and press
ENTER. The setting of the selected item alternates
between On and Off.
Notes
– Actual picture enhancement may vary depending on the
quality of the disc.
– While the DNR2 (expanded level) can provide additional
improvement in the reduction of noise in the video signal, it
may produce undesirable picture artifacts on some discs.
Should this occur, select a more appropriate DNR level (nor-
mal or off).
– Depending on the disc, some picture detail may be lost by
the picture enhancement.
– A DVD audio disc with Dolby Digital or DTS soundtrack may
be played, some DVD audio discs include moving pictures
which may be modified by the above processes.
DRC On
Vocal On
PBC On
B.L.E. Off
Pluge Off
DNR Off
Disc Audio
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Digital Audio Output
Others
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Cont’d)
Parental Control
DVD
Area Code
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Area Code List”, page 26.).
Rating DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated
from 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are
country-dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code Set
Disc Audio
Disc Subtitle
Disc Menu
U
S
Rating
Area Code
TV Aspect
Menu Language
Digital Audio Output
Others
8
Disc Audio
Disc Subtitle
Disc Menu
7
6
Select Area Code using the 3/4buttons on the
setup menu.
Rating
5
1
Area Code
4
TV Aspect
3
2 While Area Code is selected, press 2.
Menu Language
Digital Audio Output
2
1
Unlock
Change
3 Follow step 3 of “Rating” on left.
Others
4 Select the first character using the 3/4buttons.
Select “Rating” on the Setup menu using the 3
and 4buttons.
1
Shift the cursor using /2 buttons and select
1
5
6
the second character using 3/4buttons.
2 While “Rating” is displayed, press 2.
Press ENTER to confirm your area code selec-
tion, then press SETUP to exit the menu.
When you have not entered a password yet;
3
Install a 4-digit password using the number buttons
Note
to create a personal 4-digit security password, then
press ENTER. Enter the 4-digit password again and
press ENTER to verify.
When you have already entered a password;
Install your 4-digit password using the number
buttons to confirm the personal 4-digit security
password, then press ENTER.
Confirmation of your 4-digit password is necessary
when the code is changed (see “Changing the 4-digit
code” below ).
Changing the 4-digit code
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Install your old code, then press ENTER.
3 Select Change using the 3/4buttons then press
ENTER.
4 Install the new 4-digit code, then press ENTER.
5 Install exactly the same code a second time and veri-
fy by pressing ENTER.
If you make a mistake before pressing ENTER, press
CLEAR and install your 4-digit security password again.
Select a rating from 1 to 8 using the 3/4but-
tons. One (1) has the least playback restrictions.
4
Eight (8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is
not active. The disc will play without restrictions.
Ratings 1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the play-
er, all disc scenes with the same rating or lower will
be played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found,
playback will stop. You must enter your 4-digit
password or change the rating level in order to play
the disc.
6 Press SETUP to exit the menu.
If you forget your 4-digit code
If you forget your password, to clear the current pass-
word, follow the procedure below.
1 Press SETUP to display the setup menu.
2 Use the Number buttons to enter the 6-digit number
“210499.”
The 4-digit password is cleared. “P CLr” appears on the dis-
play. The message will appear if the disc tray is closed. It
will be on the display until you try another feature.
3 Enter a new code as shown above to the left (Rating).
Press ENTER to confirm your rating selection,
5
then press SETUP to exit the menu.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD, Video CD and Audio CD
Exchanging discs during playback
Playing a DVD, Video CD and Audio CD
ꢀ Press EX-CHANGE on the front panel during play-
back to open the disc tray.
VCD2.0
VCD1.1
Playback Setup
DVD
CD
ꢀ Press DISC SKIP to rotate the disc trays to the
desired position. The carousel will rotate clockwise by
one disc increments.
ꢀ Exchange the discs and press EX-CHANGE or
OPEN/CLOSE to close the disc tray.
ꢀ Turn on the TV and select the video input source
corresponding to the DVD player.
ꢀ Audio system: Turn on the audio system and select
the input source connected to the DVD player.
Press OPEN/CLOSE to open the disc tray.
Note
1
– The disc tray presently loaded in the play position can
not be exchanged.
Load your disc in the tray, with the label facing
2
up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing up.
Skipping discs
Press DISC SKIP during play or when playback is
stopped.
• Discs can be loaded one at a time by pressing
DISC SKIP to rotate the carousel.
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu may appear instead.
Notes
3
– When DISC SKIP is pressed, the disc tray rotates and
playback begins from the beginning of the next disc.
– If there is no disc on the next disc tray, the following
disc tray will be selected.
– When DISC SKIP is pressed during playback of disc
5, playback of disc 1 will start.
If a disc menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD that contains a menu.
Exchanging the disc and starting playback
DVD
1.Press OPEN/CLOSE during playback or when play-
back is stopped.
Play stops (if pressed during playback), the disc tray opens
and the disc that was in the play position comes to the front.
2.Exchange the disc.
3.Press OPEN/CLOSE or PLAY again.
The tray closes and playback begins (with the disc
that was in front).
Use the 1 2 3 4 buttons to select the title/chapter
and additional selections you want, then press ENTER
to start playback.
Press TOP MENU or MENU to return to the disc menu
screen.
VCD2.0
ꢀ Use the number buttons to select the track you want
to view.
Press RETURN to return to the disc menu screen.
ꢀ Menu setting and the exact operating procedures for
using the disc menu may differ depending on the disc.
Follow the instructions on each menu screen.
You also may set PBC to Off under setup. See page
14.
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 15).
– DVDs may have a region code.
– Your player will not play discs that have a region code
different from your player. The region code for this
player is 1 (one).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD, Video CD and Audio CD (Cont’d)
VCD2.0
VCD1.1
Slow Motion DVD
General Features
1 Press SLOW t or T during playback.
The player will enter SLOW mode.
Note
2 Use the SLOW t or T to select the required speed:
t 1/16, t 1/8, t 1/4 or t 1/2 (reverse), or T
1/16, T 1/8, T 1/4 or T 1/2 (forward).
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available from the Setup menu.
3 To exit slow motion mode, press PLAY.
1/3
Moving to another TITLE DVD
Note
Slow motion playback in reverse is not available from a
Video CD.
When a disc has more than one title, you can select to
another title as follows:
ꢀ Press GUI DISPLAY when playback is stopped.
From the title function, press the appropriate num-
bered button (0-9) to select a title number.
VCD2.0
VCD1.1
Search DVD
CD
1 Press REV m or FWD M during playback.
The player will now go into SEARCH mode.
Moving to another CHAPTER/TRACK
2 Press REV m or FWD M repeatedly to select the
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD and Audio CD, the Search speed
changes: mX2, mX4, mX8 (backward) or
MX2, MX4, MX8 (forward).
1/12
1/3
VCD1.1
DVD
CD
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
ꢀ Press SKIP . or > briefly during playback to
select the next chapter/track or to return to the begin-
ning of the current chapter/track.
3 To exit SEARCH mode, press PLAY.
VCD1.1
Random Karaoke DVD
CD
ꢀ Press . twice briefly to step back to the previous
chapter/track.
1 Press RANDOM during playback or in stop mode.
The unit automatically begins Random Playback and
“RANDOM (1-3)” appears on the TV screen.
ꢀ To go directly to any chapter during DVD playback,
press GUI DISPLAY. Then, press 3/4to select C
(chapter) (or for a Video CD and Audio CD, select T
for track). Then, enter the chapter/track number using
the numbered buttons (0-9).
• RANDOM1: Plays all the tracks on a single disc in random
order and then stops.
• RANDOM2: Plays all the tracks on current disc in
random order and then plays all the tracks on each suc-
ceeding disc in random order and then stops.
• RANDOM3: Plays 2 tracks randomly from a disc and then
plays 2 tracks randomly from a different disc until all
tracks on all discs have been played.
Note
For two-digit numbers, press the buttons in rapid
succession.
2 To return to normal playback, press RANDOM until
“RANDOM” disappears on the display window.
Still Picture and Frame-by-frame playback
VCD2.0
VCD1.1
DVD
1 Press PAUSE/STEP during playback.
The player will now go into PAUSE mode.
2 You can advance the picture frame by frame by
pressing PAUSE/STEP repeatedly on the remote
control.
Tip
By pressing SKIP . or > during Random play-
back, the unit selects another title (track) and resumes
Random playback.
Note
CD
Pause
This function works only with Compact Discs, DVD
Karaoke discs and video CD without PBC.
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY or press
PAUSE/STEP again.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD, Video CD and Audio CD (Cont’d)
General Features (cont’d)
0:16:57
- : - - : - -
Time Search DVD
VCD2.0
VCD1.1
Repeat DVD
CD
The Time Search function allows you to start playing at
any elapsed time location on the disc.
DISC
ALL
TRACK
OFF
CHAPT
TITLE
1 Press GUI DISPLAY during playback. The on-screen
DVD Video Discs - Repeat Chapter/Title/Off
display appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
1
To repeat the chapter currently playing, press REPEAT.
The Repeat Chapter icon appears on the TV screen.
2 Within 10 seconds, press 3/4to select the Time
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
2 To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes and sec-
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
onds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
Video CDs and Audio CDs - Repeat Track/Disc/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
4
Within 10 seconds, press ENTER to confirm the start time.
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
2 To repeat the disc currently playing, press REPEAT a
second time.
The Repeat Disc icon appears on the TV screen.
Selecting the sound enhancement
3 To Repeat of entire all disc contents, press REPEAT a
third time.
The Repeat All icon appears on the TV screen.
3D SUR
DIALOGUE
NORM.
DVD
VCD
CD
Press E.A.M. to select the sound enhancement during
playback.
4 To exit Repeat mode, press REPEAT a fourth time.
The Repeat Off icon appears on the TV screen.
NORM. : Normal sound
3D SUR: This player can produce a 3D Surround effect, which
simulates multi-channel audio playback from two conventional
stereo speakers, instead of the five or more speakers normally
required to listen to multi-channel audio from a home theater
system.
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 14.
DIALOGUE: Enhances critical center channel information to
make dialogue more intelligible (only when playing a DVD
video disc recorded on the Dolby Digital recording system).
• To use this enhancement on audio output from the
DIGITAL AUDIO OUT jack, be sure to set “Digital Audio
Output” to “PCM”. See page 14.
VCD2.0
VCD1.1
Repeat A-B DVD
CD
A
*
A
B
OFF
To repeat a sequence in a title:
1 Press A-B RPT at your chosen starting point.
A- appears briefly on the TV screen.
VCD2.0
VCD1.1
Zoom DVD
2 Press A-B RPT again at your chosen end point.
A-B appears briefly on the TV screen, and the repeat sequence
begins (a-b repeat appears on the player’s display).
The Zoom function allows you to expand the video
image and to move the focus point of zoomed image.
3 To cancel the sequence, press A-B RPT.
1 Press ZOOM during playback or still playback to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increases up to six times.
2 Use the 1/2/3/4buttons to move the focus point off
the zoomed image.
3 Press CLEAR to resume normal playback or return to
the paused image.
Notes
ꢀ The zoom function may not work for some DVDs.
ꢀ The zoom function may not work on multi-angle
scenes.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD, Video CD and Audio CD (Cont’d)
General Features (cont’d) Special DVD Features
DVD
VCD2.0
VCD1.1
DVD
CD
Marker Search
Checking the contents of DVD Video
discs: Menus
MARKER SEARCH
1/9
DVDs may contain menus that allow you to access spe-
cial features. To access the disc menu, press MENU.
Then, press the appropriate number button to select an
option. Or, use the 1/2/3/4 buttons to highlight your
selection, then press ENTER.
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER at the location
you want to memorize.
The Marker icon will appear on the TV screen briefly.
DVD
Title Menu
2
Repeat step 1 to enter up to nine Marker points on a disc.
1 Press TOP MENU.
To Recall a Marked Scene
If the current title has a menu, that menu will appear on the
screen. Otherwise, the disc menu may appear.
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
2 Within 10 seconds, press 1/2 to select a Marker num-
3 To remove the title menu, press TOP MENU again.
ber that you want to recall.
3 Press ENTER.
Playback will start from the Marked scene.
DVD
Disc Menu
4 To remove the MARKER SEARCH menu, press
SEARCH.
1 Press MENU.
The disc menu is displayed.
2 To exit the disc menu, press MENU again.
To clear a Marked Scene
1 During disc playback, press SEARCH.
1/1
DVD
The MARKER SEARCH menu will appear on the screen.
Camera Angle
2 Press 1/2 to select the Marker number that you want
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
ꢀ Press ANGLE repeatedly during playback to select a
desired angle.
to erase.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
The number of the current angle appears on the display.
5
To remove the MARKER SEARCH menu, press SEARCH.
DVD
Changing the Audio Language
Note
1
ENG
D
All disc markers are cleared when the power is turned
6
CH
off or the disc is removed.
Press AUDIO repeatedly during playback to hear different
audio languages or audio tracks available on the disc.
Changing the Audio Channel
RIGHT
STER.
LEFT
VCD
CD
Press AUDIO repeatedly during playback to hear a dif-
ferent audio channel (STEREO, LEFT or RIGHT).
1
ENG
DVD
Subtitles
Press SUBTITLE repeatedly during playback to view
the different subtitle languages available on the disc.
Note
If
appears, the feature is not available on the disc.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmed Playback with Video CD and Audio CD
Programmed Playback with Video CD
and Audio CD
Repeat Programmed Tracks/All
ꢀ To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the menu screen.
ꢀ To repeat all tracks on the program list, press
REPEAT a second time.
The Repeat All icon appears on the menu screen.
ꢀ To cancel Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the menu screen.
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 14.
Insert a Video CD or Audio CD and close the
1
2
tray.
To resume normal playback from programmed
playback
Press and hold PROGRAM until “PROG.” indicator dis-
appears in the display window.
Press PROGRAM while playback is stopped.
The Program menu will appear.
Program
Step
1
1
Erasing a Track from Program List
1 Press PROGRAM while playback is stopped.
The Program menu will appear.
Clear All
2 Use 1/2/3/4 to select the track that you wish to erase
from the Program list.
3 Press CLEAR.
The track will be erased from the Program list.
Note
Press PROGRAM or RETURN to exit the Program
menu.
Erasing the Complete Program List
Enter the disc number using the numerical keys
(1-5) and then press ENTER.
1 Press PROGRAM while playback is stopped.
The Program menu will appear.
2 Use 1/2/3/4 to select “Clear All”, then press ENTER.
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
3
4
Enter the track number using the numerical
keys (0-9) and then press ENTER.
The next area is selected.
Repeat steps 3 to 4.
Up to 20 tracks can be programmed.
5
Press PLAY to exit the menu.
The selected tracks are stored in the player memory and
playback begins with the first programmed sequence.
6
After playback of all programmed tracks is com-
pleted, playback is stopped
7
Tips
After playback of all programmed tracks is completed,
playback is stopped.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with MP3 Disc
Playing an MP3 disc
Notes on MP3 Discs
About MP3
The DVD Player can play MP3 formatted recordings on
CD-ROM, CD-R or CD-RW discs.
ꢀ An MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call
files that have the “.mp3” file extension “MP3 files”.
ꢀ The player can not read an MP3 file that has a file
extension other than “.mp3”.
Before playing MP3 recordings, read the notes on MP3
Recordings on right.
Insert a disc and close the tray.
1
The menu appears on the TV screen.
ꢀ The player can not read a non MP3 encoded file that
has a file extension “.mp3”.
MP3
Program
TRACK 1.MP3
TRACK 2.MP3
TRACK 3.MP3
TRACK 4.MP3
TRACK 5.MP3
TRACK 6.MP3
TRACK 7.MP3
TRACK 8.MP3
MP3 Disc compatibility with this player is limit-
ed as follows:
1. Sampling Frequency / only at 44.1kHz
2. Bit rate / within 32 - 320kbps
Clear All
OFF
56:35
1
3. CD-R physical format should be “ISO 9660”
4. If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example “Direct-
CD” etc., it is impossible to playback MP3 files. We
recommend that you use “Easy-CD Creator”, which
creates an ISO9660 file system.
5. A single session disc requires MP3 files in the first
track. If there is no MP3 file in the 1st track, it can-
not playback MP3 files. If you wish to playback MP3
files, format all the data in the disc or use a new
one.
6. We do not recommend using CD-RW discs. Please
use finished CD-R discs only.
7. File names should be named using 8 letters or less
and must incorporate “.mp3” extension
e.g. “********.MP3”.
MP3 menu
Press 3/4to select a track then press PLAY.
Playback starts.
During playback, the current track’s elapsed playing
time will appear on the display.
2
Playback will stop at the end of the disc.
3 To stop playback at any other time, press STOP.
MP3
Pause
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY or press
PAUSE/STEP again.
MP3
8. Do not use special letters such as “_?!><+*}{`[@
]:;\/.,” etc.
9. Total number of files on the disc should be less than
200.
10. Use 74 minute CD-R discs (650M), Do not use 80
minute CD-R (700M) software
Moving to another Track
ꢀ Press SKIP . or > once during playback to
advance to the next track or to return to the beginning
of the current track.
ꢀ Press SKIP . twice briefly to step back to the pre-
vious track.
This DVD player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3 files). That require certain pre-existing conditions
(see above) to insure compatible playback.
MP3
Repeat Track/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the menu screen.
2 To repeat all tracks on a disc, press REPEAT a sec-
ond time.
The Repeat All icon appears on the menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the menu screen.
Customers should also note that permission is
required in order to download MP3 files and music
from the Internet. TOSHIBA cannot grant such
permission. Permission should always be sought
from the copyright owner.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmed Playback with MP3 Disc
Repeat Programmed Tracks/All
Programmed Playback with MP3 Disc
ꢀ To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the menu screen.
ꢀ To repeat all tracks on the program list, press
REPEAT a second time.
Program allows you to store your favorite tracks for a
particular disc in the player memory.
Program can contain 60 tracks.
The Repeat All icon appears on the menu screen.
ꢀ To cancel Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the menu screen.
Insert the disc and close the tray.
The menu is displayed on the TV screen.
1
2
Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
Erasing a Track from Program List
1 Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
E
The
mark will appear to the right of the word Program
on the right side of the menu screen.
E
The
mark will appear.
2 Press 2 to move to the Program list.
3 Use 3/4to select the track that you wish to erase
from the Program list.
4 Press CLEAR.
The track will be erased from the Program list.
Note
Press PROGRAM to exit the Program Edit mode;
E
the
mark will disappear.
Press 3/4to select a track then press ENTER to
3
4
place the selected track on the Program list.
Erasing the Complete Program List
1 Follow steps 1-2 of “Erasing a Track from Program
List” as above.
2 Use 3/4to select “Clear All”, then press ENTER.
The complete Program for the disc will be erased.
Repeat step 3 to place additional tracks on the
Program list.
MP3
Program
E
The programs are also cleared when the disc is removed.
TRACK 1.MP3
TRACK 8.MP3
TRACK 2.MP3
TRACK 4.MP3
TRACK 3.MP3
TRACK 2.MP3
TRACK 3.MP3
TRACK 4.MP3
TRACK 5.MP3
TRACK 6.MP3
TRACK 7.MP3
TRACK 8.MP3
To resume normal playback from programmed
playback
Press and hold PROGRAM for 3 seconds until “PROG.”
indicator disappears in the display window.
Clear All
OFF
56:35
1
MP3 menu
Press 2.
The programmed track you selected last is highlighted on
the program list.
5
6
Press 3/4to select the track you want to start
playing.
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
Press PLAY to start.
Playback begins in the order in which you programmed the
tracks and “PROGRAM” appears in the display window.
Playback stops after all of the tracks on the Program list have
played once.
7
Note
The programmed tracks are cleared when the power is
turned off or the disc is removed.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Last Condition Memory
Dimmer Function
VCD1.1
DVD
CD
You can adjust the Display Window’s brightness in
3 steps. Each press of the FL DIM button modifies the
Display Window’s brightness in the following order:
This player memorizes the last condition for the last
disc you have watched. Settings remain in memory
even if you remove the disc from the player or switch off
the player. If you load a disc that has its settings memo-
rized, the latest stop position is automatically recalled.
Normal → Dim → Display Off → Normal
Notes
– Settings are stored in memory for use any time.
– This player does not memorize settings of a disc if
you switch off the player before commencing playback.
Screen Saver
A screen saver image appears when you leave the DVD
Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five
minutes, the DVD Player will automatically turn itself off.
VCD2.0
VCD1.1
Video Mode Setting DVD
ꢀ With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
ꢀ To change the video mode, press and hold
GUI DISPLAY about 3 seconds during disc playback.
The new video mode number selected is displayed on
the TV screen. Check whether the video quality has
improved. If not, repeat the above procedure until pic-
ture quality is improved.
ꢀ Video mode sequence:
Video1 → Video2 → Film → Adapt → Auto.
ꢀ If you turn off the power, the video mode will return to
initial default state (Auto).
Detailed Description of each Video Mode
Auto : The source material of the DVD video (film material or
video material) is determined from disc information.
Video1 : Suitable for playing video based content with
comparatively little motion.
Video2 : Suitable for playing video based content with
comparatively more motion.
Film : Suitable for playing film based content or video based
material recorded by the progressive scan method.
Adapt : Determines the appropriate mode (film or video)
during disc playback, and automatically selects the proper
mode. Suitable for playing a disc comprised of film and
video based content.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall outlet
securely.
ꢀ No disc is inserted.
ꢀ Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
The power is on, but
the DVD player does
not work.
ꢀ The TV is not set to receive DVD signal ꢀ Select the appropriate video input mode
No picture.
output.
on the TV so the picture from the DVD
player appears on the TV screen.
ꢀ The video cable is not connected
securely.
ꢀ Connect the video cable into the jacks
securely.
ꢀ The connected TV power is turned off.
ꢀ Turn on the TV.
No sound.
ꢀ The equipment connected with the
audio cable is not set to receive DVD
signal output.
ꢀ Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
ꢀ The audio cables are not connected
securely.
ꢀ Connect the audio cable into the jacks
securely.
ꢀ The power of the equipment connected
with the audio cable is turned off.
ꢀ Turn on the equipment connected with
the audio cable.
ꢀ The Digital Audio Output is set to the
wrong position.
ꢀ Set the Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
The playback picture is ꢀ The disc is dirty.
ꢀ Clean the disc.
poor.
ꢀ No disc is inserted.
ꢀ Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
The DVD player does
not start playback.
ꢀ An unplayable disc is inserted.
ꢀ Insert a playable disc. (Check the disc
type, color system and Regional code.)
ꢀ The disc is placed upside down.
ꢀ The disc is not placed within the guide.
ꢀ Place the disc with the playback side
down.
ꢀ Place the disc on the disc tray correctly
inside the guide.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ The Rating level is set.
ꢀ Cancel the Rating function or change
the rating level.
The remote control
does not work properly.
ꢀ The remote control is not pointed at the
remote sensor of the DVD player.
ꢀ Point the remote control at the remote
sensor of the DVD player.
ꢀ The remote control is too far from the
DVD player.
ꢀ Operate the remote control within about
23 ft (7 m).
ꢀ There is an obstacle in the path of the
ꢀ Remove the obstacle.
remote control and the DVD player.
ꢀ The batteries in the remote control are
ꢀ Replace the batteries with new ones.
exhausted.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
(See page 13).
Code Language
6565 Afar
Code Language
7079 Faroese
7082 French
7089 Frisian
Code Language
7678 Lingala
Code Language
8375 Slovak
8376 Slovenian
8377 Samoan
8378 Shona
8379 Somali
8381 Albanian
8382 Serbian
8385 Sudanese
8386 Swedish
8387 Swahili
8465 Tamil
6566 Abkhazian
6570 Afrikaans
6577 Ameharic
6582 Arabic
7679 Laothian
7684 Lithuanian
7686 Latvian, Lettish
7771 Malagasy
7773 Maori
7165 Irish
7168 Scots Gaelic
7176 Galician
7178 Guarani
7185 Gujarati
7265 Hausa
6583 Assamese
6588 Aymara
6590 Azerbaijani
6665 Bashkir
6669 Byelorussian
6671 Bulgarian
6672 Bihari
7775 Macedonian
7776 Malayalam
7778 Mongolian
7779 Moldavian
7782 Marathi
7273 Hindi
7282 Croatian
7285 Hungarian
7289 Armenian
7365 Interlingua
7378 Indonesian
7383 Icelandic
7384 Italian
7783 Malay
8469 Telugu
8471 Tajik
6678 Bengali; Bangla
6679 Tibetan
6682 Breton
7784 Maltese
7789 Burmese
7865 Nauru
8472 Thai
8473 Tigrinya
8475 Turkmen
8476 Tagalog
8479 Tonga
8482 Turkish
8484 Tatar
6765 Catalan
6779 Corsican
6783 Czech
7869 Nepali
7876 Dutch
7387 Hebrew
7465 Japanese
7473 Yiddish
7487 Javanese
7565 Georgian
7575 Kazakh
7576 Greenlandic
7577 Cambodian
7578 Kannada
7579 Korean
7583 Kashmiri
7585 Kurdish
7589 Kirghiz
7879 Norwegian
7982 Oriya
6789 Welsh
6865 Danish
6869 German
6890 Bhutani
6976 Greek
8065 Panjabi
8076 Polish
8487 Twi
8083 Pashto, Pushto
8084 Portuguese
8185 Quechua
8277 Rhaeto-Romance
8279 Rumanian
8285 Russian
8365 Sanskrit
8368 Sindhi
8575 Ukrainian
8582 Urdu
6978 English
6979 Esperanto
6983 Spanish
6984 Estonian
6985 Basque
7065 Persian
7073 Finnish
7074 Fiji
8590 Uzbek
8673 Vietnamese
8679 Volapük
8779 Wolof
8872 Xhosa
8979 Yoruba
9072 Chinese
9085 Zulu
8372 Serbo-Croatian
8373 Singhalese
7665 Latin
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Area Code List
Enter the appropriate code number for the initial setting “Area Code” (See page 15).
Code Area
Code Area
Code Area
Code Area
AD
AE
AF
AG
AI
Andorra
ER
ES
ET
FI
Eritrea
Spain
Ethiopia
Finland
LC
LI
LK
LR
LS
LT
LU
LV
Saint Lucia
SC
SD
SE
SG
SH
SI
Seychelles
Sudan
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Islands
Slovak Republic
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Saint Tome and Principe
Former USSR
El Salvador
Syria
Swaziland
Turks and Caicos Islands
Chad
French Southern
Territories
Togo
Thailand
Tadjikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
Turkey
Trinidad and Tobago
Tuvalu
Taiwan
Tanzania
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libya
Morocco
Monaco
FJ
Fiji
AL
FK
FM
FO
FR
FX
Falkland Islands
Micronesia
Faroe Islands
France
France (European
Territory)
Gabon
Great Britain
Grenada
Georgia
French Guyana
Ghana
Gibraltar
Greenland
Gambia
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
SJ
LY
SK
SL
SM
SN
SO
SR
ST
SU
SV
SY
SZ
TC
TD
TF
MA
MC
MD
MG
MH
MK
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
Moldavia
Madagascar
Marshall Islands
Macedonia
Mali
Myanmar
Mongolia
Australia
Aruba
Azerbaidjan
Bosnia-Herzegovina
Barbados
Bangladesh
Belgium
Burkina Faso
Bulgaria
Bahrain
Burundi
Benin
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Belarus
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
Switzerland
Ivory Coast
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Former Czechoslovakia
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
Western Sahara
Macau
Northern Mariana Islands
Martinique (French)
Mauritania
Montserrat
Malta
Guinea
Guadeloupe (French)
Equatorial Guinea
Greece
S. Georgia & S. Sandwich
Isls.
Guatemala
Guam (USA)
Guinea Bissau
Guyana
Hong Kong
Heard and McDonald
Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
Israel
India
British Indian Ocean
Territory
Iraq
Iran
Iceland
Italy
Jamaica
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UK
UM
BJ
Mauritius
Maldives
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CS
CU
CV
CX
CY
CZ
DE
DJ
GT
GU
GW
GY
HK
HM
MW Malawi
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
Mexico
Malaysia
Mozambique
Namibia
New Caledonia (French)
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
HN
HR
HT
HU
ID
IE
IL
IN
IO
Ukraine
Uganda
United Kingdom
USA Minor Outlying
Islands
United States
Uruguay
Uzbekistan
Vatican City State
Saint Vincent &
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (USA)
Vietnam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbabwe
US
UY
UZ
VA
VC
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
KM
KN
KP
KR
KW
KY
KZ
LA
LB
VE
VG
VI
Jordan
Japan
Kenya
Poland
Saint Pierre and Miquelon
Pitcairn Island
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Reunion (French)
Romania
Russian Federation
Rwanda
Saudi Arabia
Solomon Islands
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Kyrgyzstan
Cambodia6
Kiribati
Comoros
Saint Kitts & Nevis Anguilla
North Korea
South Korea
Kuwait
DK
DM
DO
DZ
EC
EE
EG
EH
Cayman Islands
Kazakhstan
Laos
Lebanon
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
AC 120V , 60 Hz
16W
430 X 118 X 408 mm (16.9 x 4.7 x 16.1 inches) (w x h x d)
5.7 kg (12.6 lbs)
Operating temperature
Operating humidity
5˚C to 40˚C (41˚F to 104˚F)
5 % to 90 %
System
Laser
Semiconductor laser, wavelength 650 nm
NTSC
Signal system
Frequency response
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100dB (ANALOG OUT connectors only)
Less than 0.008%
More than 100 dB (DVD)
More than 95 dB (CD)
Outputs
VIDEO OUT
S-VIDEO OUT
1 Vp-p 75 ohms, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 ohms
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, RCA jack x 2
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
0.5 V (p-p), 75 Ω, RCA jack x 1
5 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 330 Ω, RCA jack (L, R) x 2
Accessory
Video cable . . . . . . . . . . . . . . . . . . . . . . .1
Audio cable . . . . . . . . . . . . . . . . . . . . . . .1
Remote control . . . . . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . . . .2
ꢀ Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. “Dolby”, and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY DVD VIDEO PLAYER
Toshiba America Consumer Products, Inc. (“TACP”), Toshiba Hawaii (“THI”) and Toshiba Canada Limited (“TCL”) make the follow-
ing limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift from the orig-
inal purchaser and to no other purchaser or transferee.
Limited Ninety (90) Day Warranty
Commercial Units
TACP/THI warrant this product against defects in materials or
workmanship for a period of ninety (90) days after the date of
original retail purchase. During this period, TACP/ THI will
repair or replace a defective product or part, at their option,
with a new or refurbished product or part without charge to
you. You must deliver the entire product to a TACP/THI
Authorized Service Station. You are responsible for all trans-
portation and insurance charges for the unit to and from the
Authorized Service Station. If you live in the
U.S.A. you may, at your option, return your DVD Unit to:
Toshiba America Consumer Products Inc.
Products sold and used for commercial use have a limited
ninety (90) day warranty for all parts and labor.
Owner’s Manual
You should read the owner’s manual thoroughly before operat-
ing this product. You should complete and mail the enclosed
Demographic card within ten (10) days after you, or the person
who has given you this product as a gift, purchased this prod-
uct. This is one way to enable TACP to provide you with better
customer service and improved products. Failure to return the
card will not affect your rights under this warranty.
Returns Center
1420C Toshiba Dr.
Your Responsibility
Lebanon, TN 37087
The above warranties are subject to the following conditions:
(1) You must retain your bill of sale or provide other proof of
purchase.
(2) You must notify a TACP/THI/TCL /Authorized Service
Station within thirty (30) days after you discover a defective
product or part.
Upon receipt we will, at our option, exchange the DVD Unit
with a new or refurbished unit. Canadian consumers are
requested to contact TCL. In Hawaii consumers are
requested to contact THI.
Limited One (1) Year Warranty
(3) All warranty servicing of this product must be made by a
TACP/THI/TCL Authorized Service Station.
(4) U.S.A. warranties are effective only if the product is pur-
chased and operated in the Continental U.S.A. or Puerto
Rico.
TACP/THI further warrant the parts in this product against
defects in materials or workmanship for a period of one (1)
year after the date of original retail purchase. During this peri-
od, TACP/THI will repair or replace a defective product or part,
at their option, with a new or refurbished product or part with-
out charge to you, except that if a defective part is replaced
after ninety (90) days from the date of the original retail pur-
chase you pay labor charges involved in the replacement. You
must also deliver the entire product to a TACP/THI Authorized
Service Station. You are responsible for all transportation and
insurance charges for the unit to and from the Authorized
Service Station. If you live in the U.S.A. you may, at your
option, return your DVD Unit to:
(5) Labor service charges for set installation. Set up, adjust-
ment of customer controls and installation or repair of
antenna systems are not covered by this warranty.
Reception problems caused by inadequate antenna sys-
tems are your responsibility.
(6) Warranties extend only to defects in materials or workman-
ship as limited above and do not extend to any product or
parts which have been lost or discarded by you or to dam-
age to products or parts caused by misuse, accident, dam-
age caused by Acts of God, such as lighting or fluctuations
in electric power, improper installation, improper mainte-
nance or use in violation of instructions furnished by us; or
to units which have been altered or modified without
authorization of TACP/THI/TCL or to damage to products
or part thereof which have had the serial number removed,
altered, defaced or rendered illegible.
Toshiba America Consumer Products Inc.
Returns Center
1420C Toshiba Dr.
Lebanon, TN 37087
Upon receipt we will, at our option, exchange the DVD Unit
with a new or refurbished unit. Canadian Consumers are
requested to contact TCL. In Hawaii consumers are
requested to contact THI.
(7) Should you elect to return your DVD Unit to TACP after the
ninety (90) days and within one (1) year, or after the war-
ranty period has expired: Call (800)-631-3811 to receive
information concerning an exchange price. Payment must
be enclosed with product in the form of a certified check or
money order including reason for return.
Rental Units
The warranty for rental units begin with the first rental or thirty
(30) days from the date of shipment to the rental firm, whichev-
er comes first.
(8) Physically damaged DVD Units are not acceptable for
repair or exchange whether in or out of warranty and will
be returned as received.
(Continued)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY DVD VIDEO PLAYER (Continued)
How to Obtain Warranty Service
(1) Refer to the troubleshooting guide in your owner’s manual. This check list may solve your problem.
(2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30) days
after you find a defective product or part.
(3) Arrange for the delivery of the product to the TACP/THI/TCL Authorized Service Station or TACP Return Center. Products
shipped to the Service Station must be insured and safely and securely packed, preferably in the original shipping carton,
and a letter explaining the defect and also a copy of the bill of sale or other proof of purchase must be enclosed.
In the Continental United States contact: In Hawaii contact:
Toshiba Hawaii Inc.
In Canada contact:
Consumer Electronics Group
191 McNabb Street
Markham, Ontario L3R 8H2
(905)-470-5400
Consumer Electronics Group
22171 Fraserwood Way
Richmond, B.C. V6W 1J5
(604)-303-2500
327 Kamakee Street
Honolulu, HA 96814
(808)-521-5377
Toll Free
800-631-3811
Consumer Electronics Group
1643 North Service Road
Droval, QC H9P 1J1
(514)-856-4100
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are
expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state law
as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar obli-
gations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall TACP/THI be liable for
consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any
manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP/THI arising under the
warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days from the date
you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states
do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of inci-
dental or consequential damages, so the above provisions may not apply to you.
ATTENTION CANADIAN CONSUMERS:
Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and forward this
completed form with a copy of bill of sale to TOSHIBA OF CANADA to “Register and Validate” their warranty. Product must be
purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada are not covered by
these warranties.
IMPORTANT: PACKING AND SHIPPING INSTRUCTION
When you send the product to a Service Station, you must use the original carton box and packing material, then insert the
original carton box containing the unit into another carton using more packing material.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
P/NO: 3834RS0033L
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|