Toshiba DVD Player SD 6100KU User Manual

Introduction  
Connections  
2
11  
16  
19  
29  
36  
DIGITAL VIDEO  
Basic playback  
Advanced playback  
Function setup  
Others  
DVD PLAYER  
S D-6 1 0 0 KU  
S D-K9 8 0 KU  
OWNER’S MANUAL  
Owner’s Record  
The model number and serial number are on the back of  
your DVD Player. Record these numbers in the spaces  
below.Refer to these numbers whenever you communicate  
with your Toshiba dealer about this DVD Player.  
Model number:  
Serial number:  
© 2008 Toshiba Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)  
that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider  
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is  
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the  
obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or  
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
Portable Cart Warning  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any  
way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,  
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  
ADDITIONALSAFETYINSTRUCTIONS  
15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or  
electric shock.  
16. Never expose the apparatus to dripping or splashing or place items such as vases, aquariums, any other item filled with  
liquid, or candles on top of the unit.  
17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.  
18. Do not place anything on top of this unit.  
19. Do not place the apparatus on amplifiers or equipment that may produce heat.  
20. Never block or cover the slots or openings in the unit.  
Never place the unit:  
• on a bed, sofa, rug or similar surface;  
• too close to drapes, curtains, or walls; or  
• in a confined space such as a bookcase, buit-in cabinet, or any other place with poor ventilation.  
The slots and openings are provided to protect the unit from overheating and to help maintain reliable operation.  
21. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury  
and apparatus malfunction.  
22. If the apparatus should emit smoke or an unusual odor, immediately disconnect the power cord from the wall outlet. Wait  
until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.  
23. During thunderstorms, do not touch the connecting cables or the apparatus.  
24. Warning: To prevent spread of fire, keep candles or other open flames away from this product at all times.  
Location of the required label  
The rating plate and the safety caution are  
on the rear of the unit.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Precautions  
Notes on handling  
Notes on moisture condensation  
When shipping the DVD player, the original shipping  
carton and packing materials come in handy. For  
maximum protection, repack the unit as it was originally  
packed at the factory. Take care not to give it a shock  
or shake when carrying.  
Do not use volatile liquids, such as insect spray, near  
the DVD player.Do not leave rubber or plastic products  
in contact with the DVD player for a long time.They will  
leave marks on the finish.  
Moisture condensation damages the DVD player. Please  
read the following carefully.  
Moisture condensation occurs, for example, when you pour  
a cold drink into a glass on a warm day. Drops of water  
form on the outside of the glass. In the same way, moisture  
may condense on the optical pick-up lens inside this unit,  
one of the most crucial internal parts of the DVD player.  
The top and rear panels of the DVD player may become  
warm after a long period of use. This is not a  
malfunction.  
When the DVD player is not in use, be sure to remove  
the disc and turn off the power.  
If you do not use the DVD player for a long period, the  
unit may not function properly in the future. Turn on  
and use the DVD player occasionally.  
Moisture condensation occurs during the following  
cases.  
Notes on locating  
When you bring the DVD player directly from a cold  
place to a warm place.  
Place the DVD player on a level surface. Do not use it  
on a shaky or unstable surface such as a wobbling  
table or inclined stand. The loaded disc may come off  
the proper position and cause damage to the DVD  
player.  
When you place this DVD player near a TV, radio, or  
VCR, the playback picture may become poor and the  
sound may be distorted. In this case, place the DVD  
player away from the TV, radio, or VCR.  
When you use the DVD player in a room where you  
just turned on the heater, or a place where the cold  
wind from the air conditioner directly hits the unit.  
In summer, when you use the DVD player in a hot and  
humid place just after you move the unit from an air  
conditioned room.  
When you use the DVD player in a humid place.  
Notes on cleaning  
Use a soft, dry cloth for cleaning.  
For stubborn dirt, soak the cloth in a weak detergent  
solution, wring well and wipe. Use a dry cloth to wipe it  
dry.  
Do not use any type of solvent, such as thinners and  
benzene, as they may damage the surface of the DVD  
player.  
Do not use the DVD player when moisture condensation  
may occur.  
If you use a chemical saturated cloth to clean the unit,  
follow that product’s instructions.  
If you use the DVD player in such a situation, it may  
damage discs and internal parts. Remove the disc,  
connect the power cord of the DVD player to the wall  
outlet, turn on the DVD player, and leave it for two or  
three hours. After two or three hours, the DVD player  
will have warmed up and evaporated any moisture.Keep  
the DVD player connected to the wall outlet and  
moisture condensation will seldom occur.  
Inspection and Maintenance  
This DVD player is a high technology, precision device. If  
the optical pick-up lens and disc drive parts become dirty  
or worn down, the picture quality may be reduced. To  
avoid reduction in picture quality, it is recommended that  
regular inspection and maintenance (cleaning or parts  
replacement) be performed every 1,000 hours of use. For  
further details, contact your nearest consumer electronics  
dealer.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on Discs  
On handling discs  
Structure of disc contents  
Do not touch the playback side of the disc.  
Normally, DVDs are divided into titles, and the titles are  
sub-divided into chapters.VIDEO CDs and audio CDs are  
divided into tracks.  
DVD  
DVD  
Title 1  
Title 2  
Chapter 1 Chapter 2  
Chapter 1 Chapter 2 Chapter 3  
Playback side  
Do not attach paper or tape to discs.  
VIDEO CD/audio CD  
VIDEO CD/audio CD  
Track 2 Track 3 Track 4  
Track 1  
Track 5  
On cleaning discs  
Fingerprints and dust on the disc cause picture and  
sound deterioration. Wipe the disc from the center  
outwards with a soft cloth. Always keep the disc clean.  
Each title, chapter or track is assigned a number, which is  
called “title number”, “chapter number” or “track number”  
respectively.  
There may be discs that do not have these numbers.  
Notes on copyright  
The unauthorized recording, use, distribution, or revision  
of copyrighted materials including, without limitation,  
television programs, videotapes, and DVDs, is prohibited  
under the Copyright Laws of the United States and other  
countries, and may subject you to civil and criminal liability.  
If you cannot wipe off the dust with a soft cloth, wipe  
the disc lightly with a slightly moistened soft cloth and  
finish with a dry cloth.  
Do not use any type of solvent such as thinner, benzine,  
commercially available cleaners or antistatic spray for  
vinyl LPs. It may damage the disc.  
This product incorporates copyright protection technology  
that is protected by method claims of certain U.S. patents  
and other intellectual property rights owned by  
Macrovision Corporation and other rights owners. Use of  
this copyright protection technology must be authorized  
by Macrovision Corporation, and is intended for home  
and other limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
On storing discs  
Do not store discs in a place subject to direct sunlight  
or near heat sources.  
Do not store discs in places subject to moisture and  
dust such as a bathroom or near a humidifier.  
Store discs vertically in a case. Stacking or placing  
objects on discs outside of their case may cause  
warping.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Notes on Discs (continued)  
About this owner’s manual  
Playable discs  
This owner’s manual explains the basic instructions of this  
DVD player. Some DVDs are produced in a manner that  
allows specific or limited operation during playback. As  
such, the DVD player may not respond to all operating  
commands. This is not a defect in the DVD player. Refer  
to instruction notes of discs.  
This DVD player can play the following discs.  
Maximum  
playback time  
Disc  
Size  
Disc Mark  
Contents  
Approx. 4 hours  
(single sided disc)  
12 cm  
Audio  
+
video  
Approx. 8 hours  
(double sided disc)  
” may appear on the TV screen during operation.  
” means that the operation is not permitted by the  
DVDs  
A “  
(moving  
pictures)  
Approx. 80 minutes  
(single sided disc)  
DVD player or the disc.  
8 cm  
Approx. 160 minutes  
(double sided disc)  
Notes on region numbers  
Audio  
+
video  
(moving  
pictures)  
Approx. 74 minutes  
Approx. 20 minutes  
12 cm  
8 cm  
The region number of this DVD player is 1. If region  
numbers, which stand for their playable area, are printed  
VIDEO  
CDs  
DIGITAL VIDEO  
on your DVD and you do not find  
or  
, disc  
playback will not be allowed by the player. (In this case,  
the DVD player will display a message on-screen).  
Approx. 74 minutes  
Approx. 20 minutes  
12 cm  
Audio  
CDs  
Audio  
8 cm  
(CD  
single)  
On VIDEO CDs  
This DVD player supports VIDEO CDs equipped with the  
PBC (Version 2.0) function. (PBC is the abbreviation of  
Playback Control.) You can enjoy two playback variations  
depending on types of discs.  
Audio  
+
video  
(moving  
pictures)  
35 min.  
10 min.  
12 cm  
8 cm  
SUPER  
VIDEO  
CDs  
SUPER VIDEO  
• VIDEO CD not equipped with PBC function (Version 1.1)  
Sound and movie can be played on this DVD player in  
the same way as an audio CD.  
• VIDEO CD equipped with PBC function (Version 2.0)  
In addition to operation of a VIDEO CD not equipped  
with the PBC function, you can enjoy playback of  
interactive software with search function by using the  
menu displayed on the TV screen (Menu Playback).  
Some of the functions described in this owner’s manual  
may not work with some discs.  
Audio  
+
video  
(moving  
pictures)  
12 cm  
8 cm  
It depends on DivX®  
quality  
DivX®  
The following discs are also available.  
DVD±R/±RW and DVD-ROM discs of DVD format  
CD-R/CD-RW discs of CD-DA,Video CD, MP3, WMA or  
JPEG format  
Official DivX® Certified product  
Plays all versions of DivX® video (including DivX® 6) with  
standard playback of DivX® media files  
Some of these discs may be incompatible.  
You cannot play discs other than those listed above.  
You cannot play DVD-RAM discs or non-standardized discs,  
etc., even if they may be labeled as above.  
• This DVD player uses the NTSC color system, and cannot  
play DVDs recorded in any other color system (PAL, SECAM,  
etc.).  
Because of problems and errors that can occur during the  
creation of DVD and CD software and/or the manufacture of  
DVD and CD discs,Toshiba cannot assure that this DVD player  
will successfully play every disc bearing the DVD and CD logos.  
If you happen to experience any difficulty playing a DVD and/  
or CD disc on this DVD player, please contactToshiba Customer  
Service.  
is a trademark of DVD Format/Logo Licensing Corporation.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Introduction  
Advanced playback  
SAFETY PRECAUTIONS ........................... 2  
IMPORTANT SAFETY INSTRUCTIONS .... 3  
Precautions ............................................... 4  
Accessing a Specific Location Directly ........... 19  
Locating a specific title/chapter/time ................... 19  
Repeating a Specific Segment................. 20  
Repeating a specific segment ............................ 20  
Notes on Discs .......................................... 5  
Notes on region numbers ................................... 6  
Playing in a Varied Order......................... 20  
Playing titles, chapters or tracks in a varied  
order .................................................................. 20  
Table of Contents...................................... 7  
Identification of Controls ......................... 8  
Front panel .......................................................... 8  
Rear panel .......................................................... 8  
DVD display ........................................................ 8  
Remote control .................................................... 9  
Loading batteries ............................................... 10  
Operating with the remote control ...................... 10  
Playing in a Favorite Order ...................... 21  
Setting titles, chapters or tracks in a favorite  
order .................................................................. 21  
Zooming a Picture ..................................... 22  
Zooming a picture ............................................. 22  
Selecting the Sound Enhancement  
(E.A.M.) ...................................................... 22  
Selecting the sound enhancement................... 22  
Connections  
Selecting the Picture Enhancement  
(E.P.M.) ....................................................... 23  
Selecting the picture enhancement .................. 23  
Connecting to a TV .................................. 11  
Connecting to aTV............................................. 11  
Connecting to aTV (Using the component video  
jacks) ................................................................. 11  
Connecting to a display (Using a HDMITM cable) ......... 12  
Selecting Subtitles .................................... 23  
Selecting a subtitle language ........................... 23  
Connecting to Optional Equipment ....... 13  
Selecting the Camera Angle...................... 24  
Connecting to an amplifier equipped with a  
Dolby® Digital decoder ......................................... 14  
Connecting to an amplifier equipped with  
Dolby Surround Pro Logic .............................. 14  
Changing the camera angle ............................. 24  
Selecting a Language................................ 24  
Selecting a playback audio setting................... 24  
On-screen Display Operation .................... 25  
On-screen display operation ............................ 25  
Connecting to an amplifier equipped with a  
DTS® decoder .................................................. 15  
Connecting to an amplifier equipped with an MPEG2  
audio decoder .................................................. 15  
Playing MP3/WMA Files ........................... 26  
Playing MP3/WMA files ...................................... 26  
Connecting to an amplifier equipped with a  
digital audio input ........................................... 15  
Viewing JPEG Files .................................. 27  
Viewing JPEG files ............................................ 27  
Viewing a thumbnail view ................................... 27  
Basic playback  
Playing a Disc .......................................... 16  
Playing DivX®/MPEG-4 Files .................... 28  
Playing DivX®/MPEG-4 files ............................... 28  
Basic playback ................................................ 16  
Variable Speed Playback......................... 17  
Playing in fast reverse or fast forward  
directions ...................................................... 17  
Playing frame by frame ................................... 17  
Playing in slow-motion.................................... 17  
Resuming playback from the same location .. 17  
Function setup  
Customizing the Function Settings ........ 29  
Setting procedure ............................................... 29  
Setting details..................................................... 29  
Table of Languages................................... 35  
Locating a Desired Section ..................... 18  
Locating a title using the top menu.................. 18  
Locating a specific chapter or track ................ 18  
Others  
Before Calling Service Personnel ........... 36  
Specifications ........................................... 37  
Limited Warranty ...................................... 38  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Identification of Controls  
See the page in  
for details.  
Front panel  
16  
16  
8
HDMI SELECT  
10  
12  
HDMI indicator  
12  
16  
16  
16  
Rear panel  
11  
HDMI OUT  
12  
jack  
11  
Power Cord  
S-VIDEO  
S-VIDEO OUT  
jack  
14  
15  
11  
11  
DVD display  
Chapter/Track number Indicator  
The indicators vary depending on the kinds of discs you  
play.  
Bad disc  
No disc  
Multifunctional indicator (indicates  
operating status or messages, etc.)  
DVD VIDEO  
VIDEO CD  
Audio CD  
OPEN  
LOAD/CLOSE  
• During playback:  
Example  
• During playback:  
Example  
• During playback:  
Example  
Some discs may only  
display track numbers.  
Some discs may only  
display track numbers.  
Some discs may only  
display chapter numbers.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
The instructions in this manual describe the functions on the remote control. See the page in  
for details.  
16  
16  
19  
19  
22  
23  
17  
23  
24  
24  
16  
16  
17  
18  
17  
18  
17  
18  
18  
25  
16  
18  
20  
25  
16  
16  
19  
21  
29  
20  
22  
HDMI button 12  
12  
* RETURN button  
Return to menu display forVCD (2.0) discs with menu.  
* MENU button  
Use the MENU button to display the menu included on  
many DVDs.To operate a menu, follow the instructions  
in “Locating a title using the top menu.”  
18  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Identification of Controls (continued)  
Loading batteries  
Operating with the remote control  
Point the remote control at the remote  
sensor and press the buttons.  
Open the cover.  
1
Insert batteries (R03/AAA size).  
2
Distance: About 7 m (23 feet) from the front of the remote  
sensor  
Angle:  
About 30° in each direction of the front of  
the remote sensor  
* Do not expose the remote sensor of the DVD player  
to a strong light source such as direct sunlight or  
other illumination. If you do so, you may not be able  
to operate the DVD player via the remote control.  
Make sure to match the + and – on the batteries  
to the marks inside the battery compartment.  
Notes on the remote control  
Caution  
• Direct the remote control at the remote sensor of the DVD  
player.  
• Never throw batteries into a fire.  
• When using the remote control, press the buttons at intervals  
of about 1 second to ensure the correct mode of operation.  
• Do not drop or give the remote control a shock.  
• Do not leave the remote control near an extremely hot or  
humid place.  
• Do not spill water or put anything wet on the remote control.  
• Do not open the remote control.  
• If the remote control is not going to be used for a long  
time, remove the battery to avoid damage caused by  
battery leakage corrosion.  
Notes  
• Be sure to use R03/AAA size batteries.  
• Dispose of batteries in a designated disposal area.  
• Attention should be drawn to the environmental aspects of  
battery disposal.  
• Do not mix different battery types or combine used batteries  
with new ones.  
• If the remote control does not operate correctly, or if the  
operating range becomes reduced, replace both batteries  
with new ones.  
• If the batteries are dead or if you will not be using the remote  
control for a long time, remove the batteries to prevent  
battery acid from leaking into the battery compartment.  
CAUTIONS:  
• Danger of explosion if battery is incorrectly replaced.  
Replace only with the same or equivalent type.  
• Batteries shall not be exposed to excessive heat such as  
sunshine, fire or the like.  
• Do not dispose of battery in fire; battery may explode or leak.  
• When discarding batteries, environmental problems must be  
considered and local rules or laws governing the disposal of  
these batteries must be strictly followed.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
onnections  
Connecting to a TV  
Connect the DVD player to your TV.  
Connecting to aTV  
To VIDEO  
OUT  
To 2ch AUDIO OUT  
(R: red, L: white)  
Normal TV  
(yellow)  
S-Video cable (not supplied)  
• Make the following setting.  
On-screen display Select:  
Page  
If theTV has a S-video input, connect the DVD player  
with an S-video cable.When using an S-video cable,  
do not connect the yellow video cable and component  
video cables (Y/PB/PR).  
“Off”,  
“Digital Output”  
32  
“PCM” or  
To audio  
input  
To video  
input  
(yellow)  
“Raw”  
S-VIDEO  
Component  
“Video Output”  
31  
P-Scan  
HDMI  
Audio/Video cables (supplied)  
Notes  
• Refer to the owner’s manual of the connected TV as well.  
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any  
connections.  
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to aY cable adapter (not supplied) and  
then connect to yourTV.  
• Connect the DVD player directly to yourTV. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the playback  
picture may be distorted as DVDs are copy protected.  
• Analog audio out will not have sound if DTS playback is selected.  
Connecting to aTV (Using the component video jacks)  
Interlaced outputs (ColorStream®)  
Some TVs or monitors are equipped with component video inputs.  
Connecting to these inputs allows you to enjoy higher quality  
picture playback.  
Actual labels for component video inputs may vary depending on  
the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CB)  
In some TVs or monitors, the color levels of the playback picture  
may be reduced slightly or the tint may change. In such a case,  
adjust the TV or monitor for optimum performance.  
Progressive outputs (ColorStream Pro®)  
Some TVs or monitors are equipped with component video inputs  
that are capable of reproducing a progressively scanned video  
signal. Connecting to these inputs allows you to view the highest  
quality pictures with less flicker.  
Consumers should note that not all high definition television sets  
are fully compatible with this product and may cause artifacts to  
be displayed in the picture. In case of 480 progressive scan picture  
problems, it is recommended that the user switch the connection to  
the “standard definition” output. If there are questions regarding our  
TV set compatibility with this model 480p DVD player, please contact  
our Customer Service Center.  
ToY video  
input  
To PB video  
input  
iRnput  
To  
P
video  
To 2ch AUDIO OUT  
(R: red, L:white)  
To audio input  
Audio cable  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Switching the output signal (interlaced / progressive)  
using the remote control  
You can temporarily switch the output signal for better picture quality.  
Press PROGRESSIVE button repeatedly on the remote control to  
select Video Output to P-Scan mode during stop.  
• Make the following setting.  
On-screen display  
“Digital Output”  
Page  
Select:  
“PCM” or  
“Raw”  
32  
Component  
*P-Scan  
(Progressive)  
If yourTV does not support the progressive scan format, the picture  
will appear scrambled or blank.To return to normal picture, press  
PROGRESSIVE button repeatedly to select the Component mode.  
“Video Output”  
31  
*
Only for TV equipped with component video  
input jacks which support the progressive scan.  
Notes  
• Refer to the owner’s manual of the connected equipment as well.  
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet  
before making any connections.  
• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted.In this case, place the DVD player away from  
the tuner and radio.  
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level.  
Otherwise, high volume sound may damage your hearing as well as the speakers.  
Turn off the amplifier before you connect or disconnect the DVD player’s power cord.If you leave the amplifier power on, the speakers may  
be damaged.  
• Analog audio out will not have sound if DTS playback is selected.  
• ColorStream® and ColorStream Pro® are registered trademarks ofToshiba America Cousumer Products L.L.C.  
Connecting to a display (Using a HDMITM cable)  
To HDMI  
Output  
Available output signals are below:  
Auto  
480p (progressive)  
720p (progressive)  
1080i (interlaced)  
1080p (progressive)  
HDMI Cable  
HDMI-compatible display  
Switching the video quality (HDMI mode) using HDMI  
button on the remote control or HDMI SELECT button  
• Make the following setting.  
on the front panel.  
Press HDMI button on the remote control or HDMI SELECT button  
on the front panel to receive a suitable video quality in STOP mode.  
The video quality is required to match yourTV having HDMI feature  
and suitable quality. Please also check your TV owner’s manual.  
Press this button to change the output signals as below. See the  
HDMI indicator and select the appropriate output signal.  
On-screen display  
“Digital Output”  
Page  
Select:  
“PCM”  
32  
“Video Output”  
HDMI  
31  
HDMI indicator  
illuminates “ • 1080p”  
Press  
Video output signal  
1080p (progressive)  
About HDMI  
HDMI (High Definition Multimedia Interface) supports both video  
and audio on a single digital connection for use with DVD players,  
DTV, set-top boxes, and other AV devices.HDMI was developed  
to provide the technologies of High Bandwidth Digital Content  
Protection (HDCP) as well as Digital Visual Interface (DVI) in  
one specification. HDCP is used to protect digital content  
transmitted and received by DVI-compliant or HDMI-compliant  
displays.  
illuminates “ • 1080i”  
1080i (interlaced)  
720p (progressive)  
480p (progressive)  
Press  
illuminates “ • 720p”  
Press  
illuminates “ • 480p”  
Press  
HDMI has the capability to support standard, enhanced, or high-  
definition video plus standard to multi-channel surround-sound  
audio. HDMI features included uncompressed digital video, a  
bandwidth of up to 2.2 gigabytes per second (with HDTV) signals),  
one connector (instead of several cables and connectors), and  
communication between the AV source and AV devices such as  
illuminates “ • 480p, • 720p,  
• 1080i and • 1080p”  
Auto  
Press  
480p, 720p, 1080i and 1080p are signals created with this DTVs.  
DVD Player from original 480i signal. The resolution of the  
picture may not be increased even if they are selected.  
HDMI, the HDMI logo and High-Definition Multimedia Interface are  
trademarks or registered trademarks of HDMI licensing LLC.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Content of the output for each output jack is shown in the following table  
and differ depending on the On-Screen Display Setting:  
On-Screen Display Setting  
Content of output for each output jack  
"Video Output" HDMI Output HDMI  
Video  
Component S-Video  
Setting  
S-Video  
Setting *  
Invalid  
Output  
Output  
Output  
-
Output  
S-Video  
-
-
-
Composite  
Composite  
Component  
(Interlaced)  
P-Scan  
Invalid  
480i  
Invalid  
-
Composite  
480p  
-
(Progressive)  
480p  
720p  
480p Composite  
480p  
-
-
-
-
HDMI  
720p  
1080i  
1080p  
-
-
-
-
-
-
1080i  
1080p  
HDMI  
* Settings for HDMI output format are performed using the  
button  
button on the front panel.  
HDMI SELECT  
on the remote control or  
Notes  
• Refer to the owner’s manual of the connected TV as well.  
• When you connect the DVD player to yourTV, be sure to turn off the power and unplug both units from the wall outlet before making  
any connections.  
• If you have a HDMI (with HDCP) equipped monitor or display, you can connect it to this player using a HDMI cable.  
• The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio that the player is compatible  
with, including DVD-Video, Video CD/SuperVCD, CD, WMA and MP3.  
• This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) depending on the component you  
have connected. Using a HDMI connection may result in unreliable signal transfers.  
• Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate properly with this  
DVD player.  
• When using HDMI cable, do not connect to other analog video outputs.  
• No sound will be output from the HDMI cable if the digital out is not set to PCM.  
• HDMI output is only available when the Video Output is set to “HDMI”. Otherwise the HDMI button is invalid.  
Connecting to Optional Equipment  
You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.  
• For connection to yourTV, see “Connecting to aTV.  
• This section uses the following reference marks.  
Warning  
• When you are connecting (via the COAXIAL DIGITAL  
AUDIO OUT jack) an AV decoder that does not have Dolby  
Digital, DigitalTheater Systems (DTS) or MPEG2 decoding  
function, be sure to set “Digital Output” to “PCM” from the  
on-screen displays. Otherwise, high volume sound may  
damage your hearing as well as the speakers.  
• When playing DTS-encoded discs (DVDs and audio CDs),  
excessive noise may be output from the analog audio output  
jacks. To avoid possible damage to the audio system, you  
should take proper precautions when the analog audio output  
jacks of the DVD player are connected to an amplification  
system. To enjoy DTS Digital Surround™ playback, an  
external 5.1 channel DTS Digital Surround™ decoder  
system must be connected to the COAXIAL DIGITAL  
AUDIO OUT jack of the DVD player.  
: Front speaker  
: Rear speaker  
: Sub woofer  
: Center speaker  
: Signal flow  
Notes  
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver. This  
input on your A/V Receiver is reserved for Laser disc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack  
of the DVD player.  
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to theDIGITAL (COAXIAL)input of a Receiver or Processor.  
• Refer to the owner’s manual of the connected equipment as well.  
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall  
outlet before making any connections.  
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening  
level. Otherwise, the speakers may be damaged by a sudden high volume sound.  
Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the  
speakers may be damaged.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to Optional Equipment (Continued)  
Connecting to an amplifier equipped with a Dolby® Digital decoder  
Dolby Digital  
Dolby Digital is the surround sound technology used in theaters showing the latest  
Manufactured under license from Dolby  
movies, and is now available to reproduce this realistic effect in the home.You can  
enjoy motion picture and live concert DVDs with this dynamic realistic sound by  
connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital  
decoder or Dolby Digital processor.If you have a Dolby Surround Pro Logic decoder,  
you will obtain the full benefit of Pro Logic from the same DVD movies that provide  
full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby  
Surround mark.  
Laboratories. Dolby and the double-D  
symbol are trademarks of Dolby  
Laboratories.  
• Use DVDs encoded via the Dolby  
Digital recording system.  
• Make the following setting.  
On-screen display  
“Digital Output”  
Select:  
Page  
Amplifier equipped with a  
Dolby Digital decoder  
“PCM” or  
“Raw”  
32  
To COAXIAL  
type digital  
audio input  
To COAXIAL  
DIGITAL  
AUDIO OUT  
To wall  
outlet  
75 coaxial cable (not supplied)  
Connecting to an amplifier equipped with Dolby Surround Pro Logic  
Dolby Surround Pro Logic  
• Make the following setting.  
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting  
an amplifier and speaker system (right and left front speakers, a center speaker,  
and one or two rear speakers).  
On-screen display  
Select:  
Page  
“PCM” or  
“Raw”  
“Digital Output”  
32  
With an amplifier equipped with Dolby Digital  
Connect the equipment the same way as described in “Connecting to an amplifier  
equipped with a Dolby® Digital decoder. Refer to that amplifier’s owner’s manual  
and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.  
With an amplifier not equipped with Dolby Digital  
Connect the equipment as follows.  
* Connect one or two rear speakers.  
The output sound from the rear speakers will  
be monaural even if you connect two rear  
speakers.  
Amplifier equipped with  
Dolby Surround Pro Logic  
To audio  
input  
To ANALOG  
AUDIO OUT  
To wall  
outlet  
Audio cable (not supplied)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an amplifier equipped with a DTS® decoder  
Digital Theater Systems (DTS)  
DTS is a high quality surround technology used in theaters and now available for  
home use, on DVDs or audio CDs.  
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1  
channel DTS encoded sound tracks on DVDs or audio CDs.  
Manufactured under license under U.S.  
Patent #: 5,451,942 & other U.S. and  
worldwide patents issued & pending. DTS  
and DTS Digital Out are registered  
trademarks and the DTS logos and  
Symbol are trademarks of DTS, Inc. ©  
1996-2007 DTS, Inc. All Rights Reserved.  
Amplifier equipped with a  
DTS decoder  
• Use DVDs or audio CDs encoded  
via the DTS recording system.  
• Make the following setting.  
To COAXIAL  
type digital  
audio input  
To COAXIAL  
DIGITAL  
AUDIO OUT  
To wall  
outlet  
On-screen display  
“Digital Output”  
Select:  
“Raw”  
Page  
32  
75 coaxial cable (not supplied)  
Connecting to an amplifier equipped with an MPEG2 audio decoder  
MPEG2 sound  
You can enjoy motion picture and live concert DVDs with dynamic realistic sound  
by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2  
audio processor.  
• Use DVDs encoded via the MPEG2  
recording system.  
• Make the following setting.  
On-screen display  
“Digital Output”  
Select:  
Page  
Amplifier equipped with an  
MEPG2 audio decoder  
“PCM” or  
“Raw”  
32  
To COAXIAL  
type digital  
audio input  
To COAXIAL  
DIGITAL  
AUDIO OUT  
To wall  
outlet  
75 coaxial cable (not supplied)  
Connecting to an amplifier equipped with a digital audio input  
2 channel digital stereo  
• Make the following setting.  
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an  
amplifier equipped with a digital audio input and speaker system (right and left front  
speakers).  
On-screen display  
Select:  
Page  
32  
“Digital Output”  
“PCM”  
Amplifier equipped with  
a digital audio input  
To COAXIAL  
To COAXIAL  
type digital  
DIGITAL  
AUDIO OUT  
To wall  
audio input  
outlet  
75 coaxial cable (not supplied)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
CAUTION  
Playing a Disc  
Keep your fingers well clear of the disc tray as it is closing.  
Neglecting to do so may cause serious personal injury.  
This section shows you the basics on how to play a disc.  
Basic playback  
Preparations  
To obtain a higher quality picture  
• When you want to view a disc, turn on the TV and select the  
video input connected to the DVD player.  
• When you want to enjoy the sound of discs from the audio  
system, turn on the audio system and select the input  
connected to the DVD player.  
Occasionally, some picture noise not usually visible during  
a normal broadcast may appear on the TV screen while  
playing a DVD because the high resolution pictures on these  
discs include a lot of information. While the amount of noise  
depends on the TV you use with this DVD player, you should  
generally reduce the sharpness adjustment on yourTV when  
viewing DVDs.  
Press ON/STANDBY.  
ON/STANDBY  
1
To start playback in the stop mode  
Press PLAY.  
The DVD player turns on.  
Press OPEN/CLOSE.  
2
To pause playback (still mode)  
Press PAUSE/STEP during playback.  
The disc tray opens.  
To resume normal playback, press the  
PLAY button.  
• The sound is muted during still mode.  
Place the disc on the disc tray.  
3
To stop playback  
Press STOP.  
With the playback side  
down  
• There are two different disc sizes. Place the disc in  
the correct guide on the disc tray. If the disc is out of  
the guide, it may damage the disc and cause the DVD  
player to malfunction.  
• Do not place a disc which is unplayable in this DVD  
player.  
To remove the disc  
Press OPEN/CLOSE.  
Remove the disc after the disc tray  
opens completely.  
Press OPEN/CLOSE to close the disc tray.  
4
Playback starts.  
If you insert a DVD that contains a top menu, a  
menu may appear. Use  
title you want to view, then press ENTER to start  
playback.  
/
/
/
to select the  
Be sure to press the OPEN/CLOSE button to close the  
disc tray after you remove the disc.  
To turn the power off  
Press ON/STANDBY to turn the unit off.  
You may need to press the TOP MENU or MENU  
button to display disc menu (depending on the actual  
DVD.)  
Notes  
• Do not move the DVD player during playback.Doing so may damage  
the disc.  
• Use the OPEN/CLOSE button to open and close the disc tray.  
Do not push the disc tray while it is moving. Doing so may cause  
the DVD player to malfunction.  
• Do not push up on the disc tray or put any objects other than  
discs on the disc tray. Doing so may cause the DVD player to  
malfunction.  
• In many instances, a menu screen will appear after playback of  
a movie is completed. Prolonged display of an on-screen menu  
may damage your television set, permanently etching that image  
onto its screen. To avoid this, be sure to press the STOP button  
on your remote control once the movie is completed.  
Notes  
• If the disc tray is holding a disc you have already played,  
playback will begin from the location where you last stopped.  
For resuming playback, see  
.
17  
• Some video CD are recorded with PBC (Playback Control), a  
menu with recorded contents may appear on the TV if you  
have turned the PBC on. You can make your selection  
according to its PBC menu. Press the PBC button on the  
remote control to turn PBC on or off anytime during Video CD  
playback. When switching from PBC off to PBC on mode,  
playback will start from the beginning of the disc. To turn on the  
menu display again, press the RETURN button.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Variable Speed Playback  
You can play discs at various speeds, and resume playback from the location where you stopped playback.  
Playing in fast reverse or fast forward directions  
To resume normal playback  
Press PLAY.  
Press REV or FWD during playback.  
REV: Fast reverse playback  
FWD: Fast forward playback  
Notes  
Each time you press the REV or FWD  
button, the playback speed changes.  
• The DVD player mutes sound and subtitles during reverse  
and forward scan of DVDs.  
• The playback speed may differ depending on the disc.  
Playing frame by frame  
To resume normal playback  
Press PLAY.  
Press PAUSE/STEP during still playback.  
Each time you press the PAUSE/STEP  
button, the picture advances one  
frame.  
Note: The sound is muted during frame by frame playback.  
Playing in slow-motion  
To resume normal playback  
Press PLAY.  
Press SLOW during playback.  
Each time you press the SLOW  
button, the slow-motion speed  
changes in the following sequence:  
Notes  
• The sound is muted during slow-motion playback.  
• 3 speeds are available.  
Resuming playback from the same location  
Notes  
Press STOP at the location where you  
want to interrupt playback.  
• There may be a difference in the location where playback  
resumes depending on the disc.  
• Settings you changed using the on-screen displays while  
the DVD player keeps a location in the memory may function  
only after the memory is cleared.  
1
2
The DVD player memorizes the  
location where playback is stopped.  
Press PLAY.  
The DVD player resumes playback  
from the location where you stopped  
playback.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
To start playback from the beginning regardless of the location where you stopped playback.  
1
Press STOP twice.  
If you want to return to the  
beginning of a DVD, open  
and close the disc tray once  
with the OPEN/CLOSE  
button before pressing the  
PLAY button.  
The DVD player deletes the memory of the location.  
2
Press PLAY.  
Playback starts from the beginning of the current title.  
Playback starts from the beginning of the disc.  
Playback starts from the beginning of the current track.  
Locating a Desired Section  
Normally, DVDs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into  
tracks.You can quickly locate any specific title, chapter, or track.  
Locating a title using the top menu  
PressTOP MENU.  
Press ENTER.  
1
2
3
The top menu appears on the TV  
screen.  
Playback starts from chapter 1 of the  
selected title.  
e.g.  
Notes  
• The instructions above describe basic procedures which may  
vary depending on the contents of the DVD. If different  
instructions appear on theTV screen, follow those instructions.  
• If you display the top menu during playback and press theTOP  
MENU button again without selecting any title, the DVD player  
may resume playback from the point where you first pressed  
theTOP MENU button (depending on the actual DVD.)  
• This method of locating a title is available only on a disc that  
contains a top menu.  
Press  
want.  
/
/
/
to select the title you  
If the titles in the top menu are assigned  
a number, you can directly locate a  
specific title by pressing its designated  
number with the number buttons.  
• Instruction notes of discs may refer to the button that displays  
the top menu as TITLE button.  
Locating a specific chapter or track  
Note  
Press SKIP  
the chapter or track number you want.  
or  
repeatedly to access  
• Some titles may not display chapter numbers.  
Playback starts from the selected chapter or track.  
To locate succeeding chapters or tracks.  
Playback starts from the beginning of the  
current chapter or track.  
When you press twice in quick  
successions, playback starts from the  
beginning of the preceding chapter or track.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Accessing a Specific Location Directly  
Locating a specific title/chapter/time  
Accessing chapters/tracks using number  
buttons:  
PressT.  
For chapter/track numbers 10 to 19, press +10 once  
and the number 10 appears then enter one digit.  
Press ENTER.  
For chapter/track numbers 20 to 29, press +10 twice  
and the number 20 appears then enter one digit.  
Press ENTER.  
For example, if you want to select chapter/track 25,  
first press +10 twice then press the number button  
“5”.Then press ENTER.  
1Press  
SEARCH  
/
to highlight the Title/Chapter/  
Track/Time.  
e.g.  
T
1
2
00 : 11 : 42  
Accessing the time using number buttons:  
Just enter 2 digits in order.  
Track  
2
Time  
00 : 01 : 05  
The first two numbers you entered represent  
Disc Time  
seconds.  
The second two numbers you entered represent  
minutes.  
The third two numbers you entered represent hours.  
Press  
/
to select a section you want to  
locate.  
2
To set and play favorite bookmark during playback  
1.PressT twice, the display of Bookmark appears, then  
press ENTER to mark the desired scene.  
SEARCH  
e.g. When you want to locate a chapter.  
T
1
3
Bookmark  
00 : 31 : 42  
Or  
Press the number buttons to enter title,  
chapter (track) number or time.  
2. Press ENTER to play the favorite bookmark.  
To set other bookmarks.  
Follow step 1 and move through the menu by pressing  
the or button.  
Press T again to remove this display.  
Press ENTER.  
3
To cancel the Bookmark  
Playback starts from the selected  
section.  
Follow step 1, then press the CLEAR button to cancel the  
bookmark. Move through the menu by pressing the or  
button to cancel other bookmarks.  
Notes  
• Some discs may not work with marking operation.  
• The marking is canceled when you open the disc tray or turn  
the power off.  
• Some subtitles recorded around the marker may fail to  
appear.  
Notes  
• Pressing the CLEAR button resets the numbers. To clear  
the display, press the T button several times.  
• For VCD with PBC on, accessing tracks using number  
buttons does not work.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Repeating a Specific Segment  
You can specify a desired segment and repeat it.  
Repeating a specific segment  
To resume normal playback  
Press A-B RPT until Rep AB Off is displayed.  
Press A-B RPT at the beginning of the  
segment (point A) you want to play  
1
A-B RPT  
repeatedly.  
A-B RPT  
RepAB Off  
Rep A-  
Notes  
• Some discs may not permit A-B repeat operation.  
You cannot set the A-B repeat function for a segment that  
includes multiple camera angles.  
You can specify a segment only within the current title or  
track (VIDEO CD).  
• There may be a slight difference between point A and the  
location where playback actually resumes depending on the  
disc.  
Press A-B RPT again at the end of the  
segment (point B).  
2
A-B RPT  
The DVD player automatically returns to  
point A and starts repeat playback of the  
selected segment (A-B).  
Rep A-B  
Playing in a Varied Order  
You can play titles, chapters within a title, or tracks in a varied order.  
For Audio CD, please see “Playing MP3/WMA files”  
.
26  
Playing titles, chapters or tracks in a varied order  
Press PLAY MODE.  
Press PLAY.  
1
2
PLAY MODE  
Press  
/
button to select desired  
Press the PLAY button, the DVD  
player starts playback in the selected  
mode.  
features and then press ENTER button  
to toggle desired mode.  
e.g.  
Play Mode  
Mode  
Normal  
: Off  
Repeat  
To resume normal playback  
Press ENTER until the Off/Normal is displayed.  
Normal  
Shuffle  
PBC  
Repeat Chapter  
Single  
Repeat Title  
(VCD only)  
Note  
Some discs may not permit these operations.  
Shuffle: Playbacks in random order.  
PBC: Playbacks in PBC On mode (VCD only).  
Repeat Chapter: Repeats the current chapter.  
RepeatTitle: Repeats the current title.  
Single: Repeats the current track.  
All: Repeats the entire disc.  
Off: Resumes normal playback.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing in a Favorite Order  
You can combine your favorite titles, chapters, or tracks and play them in the order you determine.You can program up  
to 12 selections into the memory (Memory playback).  
Setting titles, chapters or tracks in a favorite order  
To change the programmed selections  
1. While the display appears on the TV screen, press  
Insert a disc and press MEMORY during  
stop.  
1
/
/
/
to move the highlighted bar to the item  
The following display appears.  
e.g. DVD  
you want to change, then press CLEAR.  
2. Press number buttons to input the new title/chapter/  
track number.  
MEMORY  
Memory  
To cancel the programmed selections  
1. While the display appears on the TV screen, press  
Play  
/
/
/
to move the highlighted bar to the item  
All  
you want to cancel.  
2. Press CLEAR.  
Chapter number  
Title number  
To resume normal playback from memory  
playback  
Press MEMORY button.  
e.g. VCD  
Press  
/
/
/
to move the highlighted bar to Clear  
Memory  
All, then press ENTER. All the input programs will be  
cleared.  
Play  
Press PLAY button to resume normal playback.  
ALL  
Normal playback will start from first location.  
Track number  
Select the items in the order you want by  
pressing the number buttons.  
To program during playback  
If you press the MEMORY button during playback, a  
programming display appears.  
2
3
Each time you press the  
/
/
/
button, the  
space is highlighted in turn.Highlight where you want  
to enter, then press the corresponding number  
buttons.  
Follow steps 2 and 3.  
Notes  
To select another chapter in the same title, you need  
to select the title number.  
• Some discs may not permit memory playback operation.  
• If you select repeat during memory playback, the DVD player  
repeats the current memory playback.  
• If you press the MEMORY button while the display appears  
on the TV screen, the display disappears.  
To select tracks from aVIDEO CD/audio CD in order,  
press the number buttons for the track.  
• The programmed selections will be cleared when you open  
the disc tray or turn off the DVD player.  
Press  
/
/
/
to move the highlighted  
bar to Play, then press the ENTER.  
The DVD player starts memory  
playback.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Zooming a Picture  
You can magnify areas within a picture.  
Zooming a picture  
To resume normal playback  
Press ZOOM during normal, slow or still  
playback.  
Press ZOOM repeatedly until the  
Original picture is restored.  
Off is displayed.  
The centre part of the image will be  
ZOOM  
ZOOM  
zoomed in.  
e.g.  
2
Notes  
• Some discs may not respond to zoom feature.  
• During some scenes, the buttons may not work as described.  
• Zooming does not work on subtitles or menus included on  
DVDs.  
Each time you press the ZOOM button, the magnification  
level changes as follows:  
• The magnification level varies depending on the picture size  
you select.  
1
2
3
Off  
Press the ZOOM button to select the magnification level.  
Press the buttons to view a different part of the  
/
/
/
image.You may move the image from the centre position to  
UP, DOWN, LEFT and RIGHT direction.  
When you reach the edge of the image, the display will not  
shift anymore in that direction.  
Selecting the Sound Enhancement (E.A.M.*)  
You can easily switch a preferred audio enhancement.  
*E.A.M.: Enhanced Audio Mode  
Selecting the sound enhancement  
To exit the audio enhancement selection  
Press E.A.M.  
E.A.M.  
1
Leave the DVD player unattended for about a few  
seconds after having made a selection.  
The sound enhancement will appear:  
3D effect  
Press the E.A.M. button again, the sound enhancement Notes  
• Actual effects to sounds may vary depending on the speaker  
change to Off.  
system. Make selection according to your preference.  
• Actual effects to sounds may vary depending on the disc.  
• When the DVD player is connected to an amplifier equipped  
with Dolby Surround Pro Logic, select “3D effect”. Otherwise,  
Dolby Surround Pro Logic may function differently than usual.  
3D*:  
To obtain expansive virtual surround sound effects  
from two speakers.  
To use this enhancement on sounds output from the  
ANALOG AUDIO OUT jacks, be sure to set “Digital  
Output” to “PCM”.  
* Effective in playback of a DVD or a VIDEO CD.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the Picture Enhancement (E.P.M.*)  
You can easily select a preferred picture enhancement.  
*E.P.M.: Enhanced Picture Mode  
Selecting the picture enhancement  
To exit the picture enhancement selection  
Press E.P.M. again.  
Press E.P.M.  
1
2
E.P.M  
E.P.M  
The picture enhancement menu  
appears.  
16  
16  
1
1
32  
32  
Contrast  
Note  
Actual effect to picture may vary depending on the TV. Make  
selection according to your preference.  
Select the picture enhancement by  
pressing , then press to make  
/
/
your selections.  
Each time you press the  
enhancement changes.  
/
button, the picture  
Selecting Subtitles  
You can display subtitles on the TV screen and  
select a subtitle language from those included on  
the DVD.  
Selecting a subtitle language  
Press SUBTITLE during playback.  
SUBTITLE  
Press SUBTITLE while the subtitle setting  
is displayed on the TV screen.  
2
1
The current subtitle setting is  
displayed.  
Each time you press the SUBTITLE  
button, the subtitle languages included  
on the DVD change.  
e.g.  
e.g.  
To turn subtitles on or off  
To turn off the subtitle setting display,  
press the SUBTITLE button repeatedly  
Off  
1. Press SUBTITLE during playback.  
2. Press SUBTITLE repeatedly until the  
displayed.  
Off  
is  
until  
is displayed.  
Notes  
Notes  
• Some DVDs are set to display subtitles automatically, and  
you cannot turn them off even if you set the subtitle function  
to off.  
• During some scenes, the subtitles may not appear  
immediately after you select your desired.  
• When you turn on the DVD player or replace a disc, the player  
returns to the initial default setting.  
When you select a subtitle language which is not included  
on the disc, the DVD player plays a prior language programmed  
on the disc.  
• During some scenes, the subtitles may not appear  
immediately after you change the subtitle language.  
• Some DVDs will allow you to make subtitle selections and  
turn subtitles on or off only via the disc menu.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Selecting the Camera Angle  
If the scene was recorded from multiple angles,  
you can easily change the camera angle of the  
scene you are watching.  
Changing the camera angle  
Press ANGLE while the angle number  
is displayed on theTV screen.  
Press ANGLE while playing a scene  
recorded with multiple angles.  
2
1
ANGLE  
ANGLE  
Press the ANGLE button repeatedly  
While playing a scene recorded with  
to change the scene to the next angle  
in those recorded.  
multiple angles, press the ANGLE  
button.  
e.g.  
About two seconds later, playback  
continues from the new angle you  
selected.  
If no button is pressed within 10  
seconds, playback continues  
without changing the current angle.  
Number changes to show the number  
of the current angle. (The maximum  
number of possible angles is 9)  
To resume normal playback  
Press ANGLE repeatedly until the “  
1/3 ” is displayed.  
Notes:  
This function can only be used for discs on which scenes shot from multiple angles have been recorded.  
If only one angle is recorded, “ ” is displayed.  
1/1  
Selecting a Language  
You can select a preferred language and sound  
recording system from those included on the DVD.  
Selecting a playback audio setting  
Notes  
Press AUDIO during playback.  
• When you turn on the DVD player or replace a disc, player  
returns to the initial default setting.  
If you select a sound track which is not included on the disc,  
the DVD player plays a prior sound track programmed on the  
disc.  
• Some discs allow you to change audio selections only via  
the disc menu. If this is the case, press the MENU button  
and choose the appropriate language from the selections  
on the disc menu.  
1
2
AUDIO  
The current audio setting is displayed.  
e.g.  
Recorded audio format number  
changes sequentially. (The maximum  
number of possible audio formats is 8.)  
Selecting sound channels ofVIDEO CDs  
The abbreviation of the language appears instead of  
the language name. Refer to the list of languages and  
their abbreviations.  
Press AUDIO repeatedly during  
AUDIO  
playback to hear a different audio  
channel (stereo, Left or Right).  
Press AUDIO while the audio setting is  
displayed on theTV screen.  
AUDIO  
Each time you press the AUDIO  
button, the audio settings included on  
the DVD change.  
The audio setting display will disappear after a few  
seconds.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-screen Display Operation  
When you turn on the on-screen display, you can view information on operational status and access features and settings.  
On-screen display operation  
Press NAVI.  
NAVI  
The following display appears.  
e.g. When playing a DVD.  
Select by pressing  
then press ENTER to  
access the feature.  
/
Chapter number  
00:30:34/01:00:52 1/1 5/12  
Elapsed time  
Remaining time  
Title number  
Features  
Title number (Track number)  
:
To start playback.  
To pause playback.  
To stop playback.  
Playback starts from the beginning of the current  
chapter or track.  
:
Chapter number  
:
Elapsed time of the current title or track  
:
Remaining time of the current title or track  
:
To locate succeeding chapters or tracks.  
Viewing the operational status  
1. Press DISPLAY.  
The following display appears.  
Time counter  
Elapsed time / remaining time of the current track  
Time  
“PBC On” will  
be displayed  
when PBC is  
on.  
Elapsed time / remaining time of the current title  
Time  
00:01:12 / 01:52:46  
3. To turn off the display, press DISPLAY  
Title number  
again.  
Chapter number  
Bit rate (Mbit/s)  
Amount of picture, sound and subtitle  
2. Press DISPLAY again.  
data in the DVD transferred per  
second.  
The larger the value is, the more data  
processed, but this does not  
necessarily insure better picture  
quality.  
Audio setting  
Angle setting  
2 Ch Eng  
Subtitle setting  
Bit rate  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Playing MP3/WMA Files  
You can play MP3/WMA files that have been recorded on a CD-R or CD-RW on the DVD player.  
Playing MP3/WMA files  
Play modes for MP3/WMA/CD/DivX®  
Preparations  
When you play MP3/WMA/CD/DivX®, user are able to modify the  
Play modes through the Toolkit which appears on the right of  
Make sure that a disc you want to play is compatible  
with this DVD player.  
below picture on the screen. Press  
/
buttons to navigate  
between the windows and buttons to select files/tracks or  
/
Place a CD that contains MP3/WMA files  
on the disc tray.  
play mode items.Then press ENTER button.Please refer to below  
steps to playback files/tracks in the Program view list:  
1. Select Edit mode in the Toolkit then press ENTER button to  
start edit mode.  
2. Select a file/track or more files/tracks you want in the original  
view list with the ENTER button.  
1
2
Press OPEN/CLOSE to load the disc.  
3. Select Add to program in theToolkit then press ENTER.“  
will disappear from the screen. It means that the files/tracks  
you have selected already added into the program view list.  
4. Select Program view in the  
To stop playback, press STOP.  
T01_Divx1.5Mbp  
1
/3  
Toolkit then press ENTER to  
open the files/tracks in the  
Program view list that you  
already selected in step 2.  
5. Press PLAY to playback all  
files/tracks in the Program  
view list.  
3
T01_Divx1.5Mbp  
Repeat  
Mode  
:
:
Off  
Normal  
T02_Divx3Mbps  
T03_Divx4Mbps  
Selecting a specific time of the current track  
JPEG Preview  
1. Press T.  
2. Enter the time to select a specific time you want to play.  
3. Press ENTER to begin playback of the selected time.  
The Toolkit has the following play mode items:  
Filter (Audio/Photo/Video): Sets file filters.  
Repeat (Off/Track/All):  
Off: Resumes normal playback.  
Track:Repeats the current track.  
All: Repeats all files on the current folder or all tracks on the disc.  
Mode (Normal/Shuffle/Music Intro):  
Notes  
• Letter of a file/folder name overflowing the given space are  
not displayed.  
You can play in fast reverse or fast forward during MP3/WMA  
playback.  
Normal: Resumes normal playback.  
Shuffle: Playbacks track/file in random order.  
To pause playback  
Press PAUSE/STEP during playback.  
Music Intro: Only playbacks the first 10 seconds of all the  
files on the current folder or all tracks on the disc.  
Edit mode: Memory operation works only when Edit mode is  
selected. After finish storing the files/tracks you want into  
the Program view list, select “Edit mode” again and press  
ENTER to release edit mode.  
Program view:To view tracks/files in the Program view list.  
It is disabled when the Program view list is empty.  
Add to program: Add files/tracks to the Program view list. It  
is disabled if the Edit mode is not selected.  
To resume normal playback, press  
the PLAY button.  
Notes  
• Some discs may not permit this operation.  
• The COAXIAL DIGITAL AUDIO OUT jack outputs MP3/WMA  
sounds in the linear PCM format regardless of the current “Digital  
Output” selection.  
• The SKIP function is also available.  
Browser view:To view files/tracks in the original view list.  
Clear program: Delete the files/tracks in the Program view  
list. Select a file/track or more you want to delete in stop  
mode. “ “ will appear besides the deleted file/track. Select  
Clear program and then press ENTER. It is disabled if the  
Edit mode is not selected.  
Playable files  
MP3/WMA disc compatibility with this player is limited as follows:  
• Playable discs:  
CD-R (650MB / 74 min. only)  
CD-RW may not be compatible.  
44.1 kHz only  
• Sampling Frequency:  
• Bit rate:  
MP3: 32 kbps - 320 kbps (CBR*)  
WMA: 48 kbps - 192 kbps (CBR*)  
Mode 1, Mode 2 XA Form 1  
ISO9660 Level 1, 2 or Joliet  
A file name should be in alphabet and  
numerals only, and must incorporate  
“MP3” or “WMA” extension. e.g.  
“********.MP3”, “********.WMA”.  
This DVD player requires discs/recordings to meet certain technical  
standards in order to achieve optimal playback quality. Pre-  
recorded DVDs are automatically set to these standards. There  
are many different types of recordable disc formats (including  
CD-R containing MP3/WMA files). Because this area of technology  
is still evolving,Toshiba cannot guarantee that all recordable discs  
will produce optimal playback quality. The technical criteria set  
forth in this owner’s manual are meant only as a guide.  
• CD physical format:  
• File system:  
• File name:  
Total number of folders: Less than 256  
Total number of files:  
• WMA codec version:  
* CBR = Constant Bit Rate  
Less than 1000  
V7 orV8 (Stereo sound only)  
Please be advised that you must obtain permission from the  
applicable copyright owners to download copyrighted content,  
including music files, in any format, including the MP3 formats,  
prior to the downloading thereof.Toshiba has no right to grant and  
does not grant permission to download any copyrighted content.  
Note:When the MP3/WMA file is out of the above specifications,  
the song may be skipped or muted with counter moving.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing JPEG Files  
You can play JPEG files that have been recorded on a CD-R or CD-RW on the DVD player.You can select a preferred view:  
a page of 9 thumbnail images or a single image view. Also, rotating, enlarging and shifting of each image can be possible.  
Viewing JPEG files  
Preparations  
Prepare a disc that contains JPEG files you want to view (see next page for Jpeg files compatibility). In Setup  
Menu, it is preferred to select “Original” for “View Mode”.  
Make your TV shape conform to the 4:3 picture size. Only 4:3 pictures can be played regardless of the function  
settings via the on-screen displays of the DVD player. If the TV is adjusted to other sizes, e.g. “16:9”, images will  
appear to be horizontally expanded. For details, refer to the owner’s manual of your TV.  
Press the  
/
/
/
buttons to view a different part of the  
Press OPEN/CLOSE to open the disc tray,  
place a disc that contains JPEG files.  
image.You may move the image from the centre position to  
UP, DOWN, LEFT and RIGHT direction. When you reach  
the edge of the image, the display will not shift anymore in  
that direction.  
1
Press OPEN/CLOSE to close the disc  
tray. A list of folders/files will appear on  
the screen.  
To rotate an image  
Press the ANGLE button repeatedly.The image will rotate in  
the clockwise direction as follows:  
ANGLE  
A list of files in the  
disc appears.  
(Selection mode)  
Repeat : Off  
Mode : Normal  
e.g.  
To resume normal playback  
W: 515 H:770  
Press the ZOOM repeatedly until the  
Off is displayed.  
Press  
/
button to select your  
Original picture is restored when the  
Off appears.  
Depending on the file size, some files  
may not display the entire image.  
ZOOM  
desired file, and then press ENTER or  
PLAY button to start playback.  
Press STOP to display a folder list.  
Note: When you press  
/
button to  
select the left file, the selected picture  
will appear at the lower right corner.  
Viewing a thumbnail view  
To quit the JPEG playback, press STOP.  
• Pressing the OPEN/CLOSE button to open  
the disc tray can also quit the playback.  
PressTOP MENU in full-screen review.  
1
e.g.  
To pause playback  
Press PAUSE/STEP during playback  
To resume normal playback, press  
PLAY.  
To change the image  
To view the succeeding image, press SKIP  
.
Press the  
/
/
/
to select an  
image, press PLAY to view one  
image in full-screen and automatically  
images will be displayed one by one  
again in a few seconds.  
To view the previous image, press SKIP  
.
To magnify image  
Press ZOOM repeatedly.  
Turn the page if necessary  
Press SKIP to review other thumbnail screen.  
/
ZOOM  
Each time you press the ZOOM button, the  
magnification level changes as follows:  
1
2
3
Off  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Playing DivX®/MPEG-4 Files  
You can play DivX® and MPEG-4 files that have been recorded on a CD-R or CD-RW on the DVD player.  
Playing DivX®/MPEG-4 files  
Playable files  
DivX® / MPEG-4 disc compatibility with this player is limited as  
follows:  
Press OPEN/CLOSE to open the disc  
tray, place a disc that contains DivX® or  
MPEG-4 files.  
1
• Playable discs:  
CD-R (650MB / 74 min. only)  
CD-RW may not be compatible.  
DivX® 3.11, 4.12, 5.0, 5.1  
CBR MP3, VBR MP3, Mono MP3,  
DivX® AC3  
Press OPEN/CLOSE to close  
the disc tray, after completion of  
reading, a list of folders in the  
disc will appear.  
• DivX® versions:  
• Audio format:  
• Enhance video:  
• Frame rate:  
GMC, Qpel, Progressive B-frames  
8 to 25 fps  
• CD physical format:  
• File system:  
• File name:  
Mode 1, Mode 2 X A Form 1  
ISO9660 Level 1, 2 or Joliet  
A file name should be in alphabet  
and numerals only, and must  
incorporate “MPG” or “AVI”  
extension.  
A list of folders in the disc  
appears.  
Repeat : Off  
Mode : Normal  
e.g.  
e.g. “ *******.MPG ”, “ *******.AVI ”  
Total number of folders: Less than 256  
Total number of files”  
Less than 1000  
Press  
/
to select your desired  
Notes  
file, and then press ENTER or  
PLAY button to start playback.  
• It is recommended you record same kind of files in a CD-R or  
CD-RW.  
• Some DivX® Video-On-Demand files may require registration  
code of your DVD player, you may get the code in Default  
settings.  
Press STOP to display a folder  
list.  
DivX, DivX Certified, and associated logos are trademarks  
of DivX, Inc. and are used under license.  
JPEG files compatibility  
Discs whose compatibility with this DVD player has been confirmed by TOSHIBA are as follows.  
CANON QuickCD  
Kodak Picture CD  
FUJICOLOR CD  
NORITSU QSS CD  
JPEG disc compatibility with this DVD player is limited as follows:  
• Playable discs:  
CD-R (650MB / 74 min. only)  
CD-RW may not be compatible.  
• CD physical format:  
• File system:  
Mode 1, Mode 2 XA Form 1  
ISO9660 Level 1, 2 or Joliet  
• File name:  
A file name should be in alphabet and numerals only, and must incorporate “JPG”  
extension.  
e.g.“********.JPG” (Do not name the file with “JPE” or “JPEG” extension.)  
Total number of folders:  
Total number of files:  
Less than 256  
Less than 1000  
Depending on the file size, some files may not display the entire image.  
Some discs may not permit this operation.Especially, the following conditions of included files will increase the disc’s disability.  
1. Pixels over 3072 x 2048 in height and/or width  
2. File format except Exif  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings  
You can change the default settings to customize performance to your preference.  
Setting procedure  
Setting details  
Press SETUP during stop.  
OSD language  
DVD menu  
: English  
: Off  
1
2
Language  
The following on-screen display  
appears.  
: English  
: English  
OSD language  
DVD menu  
: English  
: Off  
: English  
: English  
OSD Language  
English: To view on-screen displays in English.  
Français: To view on-screen displays in French.  
Español: To view on-screen displays in Spanish.  
Press  
/
to select an option for the  
setting you want to change, then press  
.
1) Press SETUP button.  
2) Press button to select OSD Language.  
3) Press ENTER button, then use the  
select a preferred  
Language settings  
Video settings  
Audio settings  
Rating settings  
Misc settings  
/
button to  
OSD language  
language.  
4) Press ENTER  
button.  
Español  
5) Press SETUP  
DVD menu  
button to exit the  
menu.  
Press  
/
to select the setting you want  
3
4
to change, then press ENTER.  
DVD  
Subtitle  
English: To display subtitles in English.  
French: To display subtitles in French.  
Spanish: To display subtitles in Spanish.  
Change the selection by  
/
buttons, by  
Auto:  
To display subtitles in different languages other  
than you selected.  
To disable subtitles.  
referring to the corresponding pages, then  
press ENTER.  
Off:  
1) Press SETUP button.  
2) Press button then use the  
Subtitle.  
3) Press ENTER button, then use the  
select a preferred  
/
button to select  
button to  
/
language.  
OSD language  
4) Press ENTER  
button.  
5) Press SETUP  
button to exit the  
menu.  
Repeat steps 3 and 4 to change other  
settings.  
To select another option, press to go back to step 2.  
French  
Spanish  
5
DVD menu  
Press SETUP.  
6
Notes  
The on-screen display disappears.  
Some DVDs may be set to display subtitles in a different  
language other than you selected. A prior subtitle language  
may be programmed on the disc.  
Note  
Some DVDs allow you to change subtitle selections only via  
the disc menu. If this is the case, press the MENU button and  
choose the appropriate subtitle language from the selection  
on the disc menu.  
To quit the procedure, press the SETUP button to turn off  
the on-screen display.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings (continued)  
Setting details  
Audio  
: 4 : 3  
Aspect Ratio  
Video out  
Video  
: Auto Fit  
English: To play sound tracks in English.  
French: To play sound tracks in French.  
Spanish: To play sound tracks in Spanish.  
: HDMI  
HDMI Resolution : 480p/576p  
JPEG Interval  
: 5 seconds  
1) Press SETUP button.  
2) Press  
Audio.  
3) Press ENTER button, then use the  
a preferred language.  
button, then use the  
/
button to select  
button to select  
/
4) Press ENTER button.  
5) Press SETUP button to exit the menu.  
DVD  
Aspect Ratio  
1) Press SETUP button.  
2) Press  
3) Press  
Aspect Ratio.  
4) Press ENTER button, then use the  
and change the TV type.  
/
button to select Video.  
OSD language  
button, then use the  
/
button to select  
/ button to shift  
: Off  
French  
DVD menu  
Spanish  
5) Press ENTER button.  
6) Press SETUP button to exit the menu.  
Aspect Ratio  
Note  
Some DVDs may not be played in a different language than  
you selected. A prior language may be programmed on the  
disc.  
Video out  
HDMI Resolution : 480p/576p  
JPEG Interval  
: 5 seconds  
DVD  
DVD Menu  
English: To display DVD Menus in English.  
French: To display DVD Menus in French.  
Spanish: To display DVD Menus in Spanish.  
4:3  
Select when a standard 4:3 TV is  
connected.  
Displays pictures cropped to fill your TV  
screen. Either or both sides of the picture  
are cut off.  
1) Press SETUP button.  
2) Press  
button, then use the  
/
button to select  
button to select a  
DVD Menu.  
3) Press ENTER button, then the  
preferred language.  
/
16:9  
Select when a 16:9 TV is connected.  
4) Press ENTER button.  
5) Press SETUP button to exit the menu.  
OSD language  
Notes  
: Off  
The displayable picture size is preset on the DVD.  
Therefore, the playback picture of some DVDs may not  
conform to the picture size you select.  
DVD menu  
French  
When you play DVDs recorded in the 4:3 picture size  
only, the playback picture always appears in the 4:3 picture  
size regardless of the TV shape setting. But, if Video  
Output is set to HDMI 720p/1080i/1080p, then picture  
will be 16:9 only.  
Spanish  
Note  
Some DVDs may not include your pre-selected language. In  
this case, the DVD player automatically displays disc menus  
consistent with the disc’s initial language setting.  
If you select “16:9” and you own a 4:3 TV set, the DVD  
playback picture will be horizontally distorted during  
playback. Images will appear to be horizontally  
compressed. Always be sure that your TV shape  
conforms to the actual TV in use.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
View Mode  
HDMI Resolution  
The user may select one of the following options:  
Fill: Fill the screen with decoded image.  
Original: Display image as it original size. “Original” is  
preferred for Jpeg viewing.  
Auto Fit: Automatically fit the decoded image on screen  
without distortion.  
1) Press SETUP button.  
2) Press  
3) Press  
/
button to select Video.  
button, then use the  
/
button to select  
button to  
HDMI Resolution.  
4) Press ENTER button, then use the  
select the options  
/
Pan Scan: Automatically display decoded image on full  
(Auto, 480p/576p,  
720p, 1080i or  
1080p).  
5) Press ENTER  
button.  
6) Press SETUP  
button to exit the  
menu.  
Aspect Ratio  
: 4 : 3  
screen without distortion.  
: Auto Fit  
Auto  
480p/576p  
1) Press SETUP button.  
Video out  
2) Press  
/
button to select Video.  
HDMI Resolution  
720p  
3) Press  
button, then use the  
/
button to select  
1080i  
1080p  
JPEG Interval  
View Mode.  
4) Press ENTER  
button, then use  
the button to  
select the options  
(Fill, Original, Auto  
Fit or Pan Scan).  
Aspect Ratio  
: 4 : 3  
/
Notes  
Video out  
Supported HDMI JPEG Mode:  
Auto, 480p/576p, 720p, 1080i and 1080p.  
If the Video Output is not set to “HDMI”, you cannot select  
the “HDMI Resolution”.  
HDMI Resolution  
JPEG Interval  
5) Press  
ENTER  
button.  
6) Press  
button to exit the menu.  
SETUP  
JPEG Interval  
Pan Scan  
1) Press SETUP button.  
Select when a standard 4:3 TV is  
connected. Displays pictures cropped  
to fill yourTV screen.Either or both sides  
of the picture are cut off.  
2) Press  
3) Press  
/
button to select Video.  
button, then use the  
/
button to select  
/ button to shift  
JPEG Interval.  
4) Press ENTER button, then use the  
and change the JPEG Interval.  
5) Press ENTER button.  
Auto Fit  
Automatically fit the decoded image on  
screen without distortion. Black bars will  
be present on top/bottom or left/right of  
screen.  
6) Press SETUP button to exit the menu.  
Off: Plays back one file at a time.  
5 seconds: Plays back images in the form of a slide  
show at 5 seconds interval.  
10 seconds: Plays back images in the form of a slide  
show at 10 seconds interval.  
Note:Depending on the DVDs, you may not be able to view  
the mode as selected.  
15 seconds: Plays back images in the form of a slide  
show at 15 seconds interval.  
Video Output  
1) Press SETUP button.  
Aspect Ratio  
: 4 : 3  
2) Press  
/
button to select Video.  
: Auto Fit  
: 480P/576P  
3) Press  
Video Out.  
button, then use the  
/
button to select  
button to select  
Video out  
4) Press ENTER button, then use the  
the output mode (Component, S-VIDEO, P-Scan or HDMI).  
5) Press  
button.  
6) Press  
button to exit the  
menu.  
/
Off  
HDMI Resolution  
5 seconds  
JPEG Interval  
ENTER  
10 seconds  
15 seconds  
Aspect Ratio  
: 4 : 3  
SETUP  
: Auto Fit  
Video out  
S-VIDEO  
Component:Select if  
you connect the DVD to  
your TV which has  
HDMI Resolution  
JPEG Interval  
P-Scan  
HDMI  
: PCM  
: Off  
Audio  
component  
inputs.  
video  
S-VIDEO: Select if you  
connect the DVD to yourTV via S-video input.  
P-Scan: Select if you connect the DVD to your TV which has  
component video inputs that support progressive scan.  
HDMI: High Definition Multimedia Interface. Select if you connect  
the DVD toTV via HDMI input.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings (continued)  
Setting details  
Rating  
Digital Output  
Parental control  
:
8. Adault  
Set Password  
Selects the output sound format corresponding to your  
system connection.  
1) Press SETUP button.  
2) Press  
3) Press  
/
button to select Audio.  
button, then use the  
/
button to select  
Digital Output.  
4) Press ENTER  
button, then use  
Off  
PCM  
Raw  
the  
/
button  
DVD  
Parental Control  
to select the  
output sound  
format (Off, PCM  
or Raw).  
DVDs equipped with the password function are rated according  
to their content. The contents allowed by a parental lock level  
and the way a DVD can be controlled may vary from disc to disc.  
5) Press ENTER  
button.  
6) Press SETUP button to exit the menu.  
For example, if the disc allowed, you could edit out violent scenes  
unsuitable for children and replace them with more suitable  
scenes, or you could lock out playback of the disc altogether.  
DVDs may or may not respond to the parental lock settings.  
This is not a defect in the DVD player.Make sure this function  
works with your DVDs.  
PCM: Select when connected to a Multi-channel digital  
stereo amplifier.The DVD player outputs sound in the PCM  
Multi-channel format when you play a DVD recorded on the  
Dolby Digital, MPEG1 OR MPEG2 recording system.  
Raw: Disc audio raw data will be output. Select “Raw” if  
your amplifier supports “DTS”.  
1) Press SETUP button.  
2) Press  
3) Press  
/
to select Rating.  
button to  
select Parental  
control, then press  
ENTER button.  
“Enter Password”  
screen will appear.  
Parental control  
Set Password  
Enter Password:  
:
8. Adault  
Off: To disable Digital Output.  
Notes  
When you make a connection to a TV, Dolby Surround  
Pro Logic or stereo system via the analog audio jacks,  
select “PCM” or “Raw”.  
If this DVD player is connected to a TV using HDMI,  
make sure to select “PCM”.  
4) Press “8888” using number buttons. (Please note, this  
is presetting password of this unit).Then press ENTER.  
Press ENTER again to list the parental level.  
Night Mode  
Night mode is equivalent to Dynamic Range Compress.  
When it is On, it reduces the variations between loud and  
soft sounds in audio output.You can still hear softer sounds  
and dialog even in very low volume.  
The parental lock level is equivalent to the following ratings:  
Level 5: PG-R  
Level 6: R  
Level 1: Kid Safe  
Level 2: G  
Level 7: NC-17  
Level 8: Adult  
Level 3: PG  
Level 4: PG-13  
1) Press SETUP button.  
2) Press  
3) Press  
/
button to select Audio.  
button, then use the  
/
button to select  
button to  
5) Press  
/
to select the rating from 1 to 8. Rating one (1)  
has the most restrictions while rating eight (8) can virtually  
playback all DVD software.  
Night Mode.  
4) Press ENTER button, then use the  
select On or Off mode.  
5) Press ENTER  
button.  
6) Press SETUP  
button to exit the  
/
6) Press OPEN/CLOSE button to activate the Parental Level  
setting.  
If the DVD has been designed to temporarily cancel the  
Parental Level, the screen will change depending on which  
disc is played. If you select “YES” with the ENTER button,  
“Enter Password” screen will appear. Input the 4-digit  
password as you have set then followed by ENTER button  
and playback will start. If “NO” is selected, press the OPEN/  
CLOSE” to remove the disc.  
: PCM  
Off  
On  
menu.  
Notes  
• If you input a wrong password, press CLEAR button and  
re-enter your 4-digit password again.  
You cannot play DVDs rated higher than the level you  
selected unless you cancel the parental lock function.  
Note  
Night mode is Dynamic Range Control (DRC) option for  
analog audio output.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DivX® Registration  
DVD  
Set Password  
Some DivX® Video-On-Demand files required registration  
code, please get the code of your DVD player as follow:  
New Password can be set to replace the default password.  
1) Press SETUP button.  
2) Press  
3) Press button, then use the  
/
button to select Rating.  
/
button to select Set  
1) Press SETUP button.  
Password.  
2) Press  
/
button to select Misc.  
4) Press ENTER button. “Enter Password” screen will  
appear.  
3) Press button, then use the  
DivX Registration.  
4) Press ENTER button, your registration code will be  
shown.  
5) Press ENTER button.  
/
button to select  
5) Press the number buttons to input the current  
password (If the password has not been set yet after  
you purchase this unit, it is “8888”). Then press  
ENTER.  
6) Press ENTER button again, “New Passwordscreen will  
appear. Press the number buttons to input the new  
password.  
6) Press SETUP button to exit the menu.  
7) Press ENTER button. Now your new password has been  
set. Be sure to remember this number!  
Screen saver  
DivX R Video On Demand  
:
On  
If you forget the password, you can erase  
your current password by pressing number  
button 8 on the remote control four times,  
then press ENTER button to confirm the  
setting.  
Your registration code is  
:
PASSWORD: 8888  
Note  
This registration code is for DivX® Video-On-Demand only.  
Do not apply this code for other applications or websites.  
Misc  
Screen Saver  
Screen saver  
HDMI Control  
:
On  
On  
:
To turn on or off the screen saver (screen protection  
to prevent image burn).  
1) Press SETUP button.  
2) Press  
/
button to select Misc.  
3) Press button, then use the  
Screen saver.  
4) Press ENTER button, then use the  
select the On or Off mode.  
6) Press SETUP button to exit the menu.  
/
button to select  
button to  
Use Default Settings  
/
If you want to return the initial language setting such as  
Language, Video, Audio and etc. to the factory default, do  
the following:  
1) Press SETUP button.  
2) Press  
/
button to select Misc.  
3) Press button to select Use Default Settings, then  
press ENTER button.  
Off  
On  
Screen saver  
HDMI Control  
4) Press  
/
button to select  
Yes”, then press  
ENTER button.  
Screen saver  
:
On  
The  
setting will be  
restored.  
original  
Do you want to use default setting?  
Note  
5) Press SETUP  
button to exit the  
menu.  
When you leave the unit in DVD stop mode for approximately  
5 minutes, the screen saver of the DVD player automatically  
appears if you set the Screen saver to On mode.To turn off  
the screen saver, press the PLAY button.  
Note  
When you reset the DVD player to the factory default, the  
DVD player will take 3-5 seconds to reset.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings (continued)  
Setting details  
Functions available for the HDMI Control  
HDMI Control  
One touch play  
You can control this DVD unit from TV’s remote which is  
connected via HDMI cable.  
When the operations with following buttons of this  
unit’s remote control are performed, the TV will  
automatically turned on and switch to appropriate  
input channel.  
1) Press SETUP button.  
2) Press  
/
button to select Misc.  
Buttons for one touch play: [PLAY], [POWER].  
3) Press button, then use the  
HDMI Control.  
4) Press ENTER button, then use the  
select the On or Off mode.  
6) Press SETUP button to exit the menu.  
/
button to select  
button to  
System information  
/
Get & Set Menu Language:  
This unit recognizes the OSD languages set for the  
TV and automatically set the same language as the  
player menu language (OSD menu language) for this  
unit.  
Power off:  
Screen saver  
HDMI Control  
:
On  
When you turn the TV off, this unit will automatically  
turns off.  
Off  
On  
Receiving operational signal from TV’s Remote:  
You can operate this unit with TV’s remote control.  
Check your TV owner’s manual for details.  
Note: This function may not work properly depending  
on the TV you are connecting.  
Off: To deactivate HDMI Control.  
On: To activate HDMI Control.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Languages  
Table of languages and their abbreviations  
Abbreviation  
Language  
Abbreviation  
Language  
Abbreviation  
Language  
– – –  
No alternate  
language  
Chinese  
Dutch  
English  
French  
German  
Italian  
Japanese  
Korean  
GN  
GU  
HA  
HI  
HR  
HU  
HY  
IA  
IE  
IK  
IN  
IS  
Guarani  
Gujarati  
Hausa  
PT  
QU  
RM  
RN  
RO  
RU  
RW  
SA  
SD  
SG  
SH  
SI  
Portuguese  
Quechua  
Rhaeto-Romance  
Kirundi  
Rumanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
CHI (ZH)  
DUT (NL)  
ENG (EN)  
FRE (FR)  
GER (DE)  
ITA (IT)  
JPN (JA)  
KOR (KO)  
MAY (MS)  
SPA (ES)  
AA  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
BG  
BH  
BI  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DA  
DZ  
EL  
EO  
ET  
Hindi  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
Inupiak  
Indonesian  
Icelandic  
Hebrew  
Sango  
Malay  
Spanish  
Afar  
Serbo-Croatian  
Singhalese  
Slovak  
Slovenian  
Samoan  
Shona  
IW  
JI  
SK  
SL  
Abkhazian  
Afrikaans  
Amharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Belorussian  
Bulgarian  
Bihari  
Bislama  
Bengali, Bangla  
Tibetan  
Breton  
Catalan  
Corsican  
Czech  
Welsh  
Danish  
Bhutani  
Greek  
Esperanto  
Estonian  
Basque  
Persian  
Finnish  
Fiji  
Faroese  
Frisian  
Yiddish  
JW  
KA  
KK  
KL  
KM  
KN  
KS  
KU  
KY  
LA  
LN  
LO  
LT  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Kashmiri  
Kurdish  
Kirghiz  
Latin  
Lingala  
Laotian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Maltese  
Burmese  
Nauru  
Nepali  
Norwegian  
Occitan  
SM  
SN  
SO  
SQ  
SR  
SS  
ST  
SU  
SV  
SW  
TA  
TE  
TG  
TH  
TI  
TK  
TL  
TN  
TO  
TR  
TS  
TT  
TW  
UK  
UR  
UZ  
VI  
VO  
WO  
XH  
YO  
ZU  
Somali  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swedish  
Swahili  
Tamil  
Telugu  
Tajik  
Thai  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tongan  
Turkish  
Tsonga  
Tatar  
Twi  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapük  
Wolof  
LV  
MG  
MI  
MK  
ML  
MN  
MO  
MR  
MT  
MY  
NA  
NE  
NO  
OC  
OM  
OR  
PA  
PL  
PS  
EU  
FA  
FI  
FJ  
FO  
FY  
GA  
GD  
(Afan) Oromo  
Oriya  
Panjabi  
Polish  
Pashto, Pushto  
Irish  
Scottish Gaelic  
Galician  
Xhosa  
Yoruba  
Zulu  
GL  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Before Calling Service Personnel  
Check the following guide for the possible cause of a problem before contacting service.  
Symptoms and correction  
Symptom  
Cause  
Correction  
Page  
11-12  
No power.  
• The power plug is disconnected.  
• Connect the power plug securely into the  
wall outlet.  
The DVD player turned off by  
itself.  
• The automatic power off function turned the  
unit off.  
• Press the PLAY button.  
16  
16  
No picture or abnormal color  
(pinkish, greenish, etc.).  
• The TV is not set to receive DVD signal  
output.  
• Select the appropriate video input mode on  
theTV so the picture from the DVD player  
appears on theTV screen.  
• The video/HDMI cable is not connected  
securely.  
• Connect the video/HDMI cable securely into  
the appropriate jacks.  
11-12  
• Mismatch setting between TV and this unit.  
• Wrong connection.  
• Select the correctVideo Output setting.  
• Check the connection.  
31  
11-12  
12  
• PROGRESSIVE button is pressed on a TV  
equipped with component video input jacks but  
does not support progressive scan.  
Toggle PROGRESSIVE button to turn off  
progressive mode.  
No sound.  
• The equipment connected with the audio cable • Select the correct input mode of the audio  
16  
is not set to receive DVD signal output.  
• The audio cable is not connected securely.  
• The audio receiver or TV is turned off.  
receiver so you can listen to the sound from  
the DVD player.  
• Connect the audio cable securely into the  
appropriate jacks.  
11-15  
16  
Turn on the equipment connected with the  
audio cable.  
• The setting of output sound format is  
incorrect.  
• Select the proper audio setting.  
32  
The playback picture has  
occasional distortion.  
• The disc is dirty.  
• Remove the disc and clean it.  
5
-
• It is in fast forward or fast reverse playback.  
• Sometimes a small amount of picture  
distortion may appear.This is not a  
malfunction.  
Brightness is unstable or noises  
are present in the playback  
pictures.  
• The effect of copy protection.  
• Connect the DVD player directly to theTV.  
Avoid connecting the DVD player to aVCR or  
TV/VCRcombination.  
11  
The DVD player does not start  
playback.  
• No disc is inserted.  
• Insert a disc.  
16  
6
• An unplayable disc is inserted.  
• Insert a playable disc. (Check the disc type  
and color system.)  
• The disc is placed upside down.  
• Place the disc with the playback side down.  
16  
16  
• The disc is not placed within the guide.  
• Place the disc correctly inside the guide on  
the disc tray.  
• The disc is dirty.  
• Clean the disc.  
5
• The parental lock function is set.  
• Cancel the parental lock function or change  
the parental lock level.  
32  
Playback does not follow the  
course of the disc’s program.  
• It is in the mode of repeat playback, memory  
playback, etc.  
• These operations may prevent a proper  
progress of the contents.  
-
-
Buttons do not work.  
• Power supply fluctuations or other  
abnormalities such as static electricity may  
interrupt correct operations.  
• Press and hold the ON/STANDBY button on  
the front panel for more than about 3  
seconds.The DVD player turns off.Press the  
button again to turn it on. If the buttons still do  
not work, disconnect the power plug and insert  
it into the wall outlet again.  
The remote control does not  
work properly.  
• The remote control is not pointed at the  
remote sensor of the DVD player.  
• Point the remote control at the remote sensor of  
the DVD player.  
10  
• The remote control is too far from the DVD player. • Operate the remote control within about 7 m.  
10  
10  
• The batteries in the remote control are  
exhausted.  
• Replace the batteries with new ones.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
DVD player / outputs / supplied accessories  
DVD Player  
Power supply  
Power consumption  
Mass  
120 V AC, 60 Hz  
8 W  
1.41 kg  
External dimensions  
Signal system  
Laser  
430 x 42 x 197 mm (W/H/D)  
NTSC  
Semiconductor laser, wavelength 650/780 nm  
Frequency range  
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz  
96 kHz sampling 4 Hz to 44 kHz  
Signal-to-noise ratio  
Audio dynamic range  
Harmonic distortion  
Wow and flutter  
More than 93 dB  
More than 80 dB  
Less than 0.05 %  
Below measurable level (less than ±0.001 % (W.PEAK))  
Temperature: 5 °C to 35 °C, Operation status: Horizontal  
Operating conditions  
Outputs  
Video output  
1.0 V (p-p), 75 , negative sync., pin jack x 1  
S-Video output  
(Y) 1.0V (p-p), 75 , negative sync., Mini DIN 4-pin x 1  
(C) 0.286V (p-p), 75 Ω  
Component video output  
(Y) 1.0V (p-p), 75 , negative sync., pin jack x 1  
(PB)/(PR) 0.7 V (p-p), 75 , pin jack x 2  
Audio output (COAXIAL DIGITAL)  
Audio output (ANALOG)  
HDMI output  
0.5V (p-p), 75 , pin jack x 1  
2.0 V (rms), 680 , pin jacks (L, R) x 1  
19 pin  
Supplied Accessories  
Audio/video cable....................................................1  
Remote control (SE-R0313) ................................. 1  
Batteries (R03/AAA) ............................................. 2  
HDMI cable (for SD-K980KU model only) ............ 1  
This model complies with the above specifications.  
• Designs and specifications are subject to change without notice.  
This model may not be compatible with features and/or specifications that may be added in the future.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Limited United StatesWarranty  
Digital AudioVideo (“DAV”) Product - ExchangeWarranty  
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United  
States.  
THESE LIMITED WARRANTIES EXTENDTOTHE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVINGTHIS  
DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR  
TRANSFEREE.  
DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT  
LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BYTHESE WARRANTIES.  
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND  
MEXICO, AND USED INTHE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.  
fires, misuse, accident, Acts of God ( such as lightning or  
fluctuations in electric power), improper installation, improper  
maintenance, or use in violation of instructions furnished by  
TACP; use or malfunction through simultaneous use of this  
DAV Product and connected equipment; or to units that have  
been modified or had the serial number removed, altered,  
defaced, or rendered illegible.  
LimitedWarranty  
TACP warrants this DAV Product and its parts against defects  
in materials or workmanship for a period of ninety (90) days  
after the date of original retail purchase.  
DURING THIS PERIOD, TACP WILL EXCHANGE  
DEFECTIVE DAV PRODUCT WITH NEW OR  
REFURBISHED DAV PRODUCTWITHOUT CHARGETOYOU.  
DURING THE PERIODTHAT COMMENCES ONTHE DATE  
THAT IS NINETY ONE (91) DAYS AFTER THE DATE OF  
ORIGINAL RETAIL PURCHASE AND ENDS ONTHE DATE  
THAT ISTHREE HUNDRED SIXTY FIVE (365) DAYS AFTER  
THE DATE OF ORIGINAL RETAIL PURCHASE,TACPWILL  
EXCHANGE A DEFECTIVE DAV PRODUCT WITH A NEW  
OR REFURBISHED DAV PRODUCT FOR A FEE.  
A
A
How to ObtainWarranty Services  
If, after following all of the operating instructions in this manual  
and checking the section “Before Calling Service Personnel,” you  
find that service is needed:  
(1) For instructions on how to obtain warranty service for your  
DAV Product under theTACP DAV ProductWarranty Exchange  
Program, contactTACP’s Consumer Solutions Center toll free  
at 1-800-631-3811.  
Rental Units  
(2) You must include the original bill of sale (or a copy of the  
original bill of sale) or other proof of purchase along with the  
entire DAV Product when sending the DAV Product to theTACP  
Warranty Exchange Center specified by TACP’s Consumer  
Solutions Center. You are responsible for all inbound  
transportation and insurance charges for the DAV Product to  
theTACPWarranty Exchange Center.  
The warranty for DAV Product rental units begins on the date  
of the first rental or thirty (30) days after the date of shipment  
to the rental firm, whichever comes first.  
Commercial Units  
DAV Products sold and used for commercial purposes have a  
limited warranty for all parts and labor, which warranty begins  
on the date of original retail purchase and ends on the date  
that is ninety (90) days thereafter.  
For additional information, visit TACP’s website:  
Owner’s Manual and Product Registration Card  
Read this owner’s manual thoroughly before operating this  
DAV Product. Complete and mail the enclosed product  
registration card or register your DAV Product on-line at  
registering your DAV Product you will enable TACP to bring  
you new products specifically designed to meet your needs  
and help us to contact you in the unlikely event a safety  
notification is required under the U.S.Consumer Product Safety  
Act. Failure to complete and return the product registration  
card does not diminish your warranty rights.  
ALLWARRANTIES IMPLIED BYTHE LAW OF ANY STATE OFTHE  
U.S.A., INCLUDING THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR  
A
PARTICULAR  
PURPOSE, ARE EXPRESSLY LIMITEDTOTHE DURATION OFTHE  
LIMITEDWARRANTIES SET FORTH ABOVE.WITHTHE EXCEPTION  
OF ANYWARRANTIES IMPLIED BYTHE LAW OF ANY STATE OF  
THE U.S.A.AS HEREBY LIMITED,THE FOREGOINGWARRANTY IS  
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,  
GUARANTEES, AGREEMENTS, AND OF ALL OTHER  
WARRANTIES, GUARANTEES, AGREEMENTS, AND OR  
REPLACEMENT OF ANY PARTS. IN NO EVENT SHALLTACP BE  
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES  
(INCLUDING, BUT NOT LIMITEDTO, LOST PROFITS, BUSINESS  
INTERRUPTION,OR MODIFICATION OR ERASURE OF RECORDED  
DATA CAUSED BY USE, MISUSE OR INABILITYTO USETHIS DAV  
PRODUCT).  
Your Responsibility  
THE ABOVE WARRANTIES ARE SUBJECTTO FOLLOWING  
CONDITIONS:  
(1) You must retain your bill of sale or provide other proof of  
purchase.  
(2) All warranty servicing of this DAV Product must be made  
pursuant to the TACP DAV Product Warranty Exchange  
Program.  
(3) The warranties from TACP are effective only if the DAV  
Product is purchased and operated in the Continental U.S.A.  
or Puerto Rico.  
(4) Labor service charges for set installation, setup, adjustment  
of customer controls, and installation or repair of antenna  
systems are not covered by this warranty. Reception  
problems caused by inadequate antenna systems are your  
responsibility.  
No person, agent, distributor, dealer, or company is authorized to  
change, modify, or extend the terms of these warranties in any manner  
whatsoever.The time within which an action must be commenced to  
enforce any obligation of TACP arising under the warranty or under  
any statute or law of the United States or any state thereof is hereby  
limited to ninety (90) days from the date you discover, or should have  
discovered, the defect. This limitation does not apply to implied  
warranties arising under state law.  
THISWARRANTY GIVESYOU SPECIFIC LEGAL RIGHTS ANDYOU  
MAY ALSO HAVE OTHER RIGHTSWHICH MAYVARY FROM STATE  
TO STATE INTHE U.S.A. SOME STATES OFTHE U.S.A. DO NOT  
ALLOW LIMITATIONS ON HOW LONG AN IMPLIEDWARRANTY  
LASTS,WHEN AN ACTION MAY BE BROUGHT,ORTHE EXCLUSION  
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,  
SOTHE ABOVE PROVISIONS MAY NOT APPLYTOYOU UNDER  
SUCH CIRCUMSTANCES.  
(5) Warranties extend only to defects in materials or  
workmanship as limited above, and do not extend to any  
DAV Product or parts that have been lost or discarded by  
you or to damage to the DAV Product or parts caused by  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited CanadianWarranty  
ForToshiba Brand Digital Audio/Video Products  
Toshiba of Canada Limited (“TCL) makes the following limited warranties to original consumers in Canada. THESE LIMITED  
WARRANTIES EXTENDTOTHE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVINGTHISTOSHIBA BRAND  
DIGITAL AUDIO/VIDEO PRODUCT (theDAV PRODUCT(S)orDAV Product (s)AS A GIFT FROMTHE ORIGINAL CONSUMER  
PURCHASER ANDTO NO OTHER PURCHASER ORTRANSFEREE.  
DAV PRODUCTS PURCHASED IN CANADA,AND USED ANYWHERE OUTSIDE OF CANADA INCLUDING,WITHOUT LIMITATION,  
THE UNITED STATES AND MEXICO, ARE NOT COVERED BYTHESEWARRANTIES.  
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF CANADA, INCLUDING,WITHOUT LIMITATION,THE UNITED STATES  
AND MEXICO, AND USED IN CANADA, ARE NOT COVERED BYTHESEWARRANTIES.  
control ofTCL, including fire, theft, acts of God, alteration,  
power failures, power surges or power shortages, lightning,  
other electrical faults, or repairs, modifications or  
replacements by persons other than those authorized by  
TCL to service the DAV Product;  
Limited One (1)YearWarranty on Parts and Labour  
Subject to the more limited warranty if the DAV Product is  
used for any commercial or business purposes as set out  
below, TCL warrants the DAV Product and its parts against  
material defects in materials or workmanship that result in  
the DAV Product failing for a period of one (1) year after the  
date of original retail purchase. DURINGTHIS PERIOD,TCL  
WILL, AT TCLS OPTION, REPAIR OR REPLACE A  
DEFECTIVE PARTWITH A NEW OR REFURBISHED PART,  
WITHOUT CHARGETOYOU FOR PARTS OR LABOUR.YOU  
MUST DELIVER THE ENTIRE DAV PRODUCT TO A TCL  
DAV PRODUCT AUTHORIZED SERVICE PROVIDER  
(“ASP”).YOU MUST PAY FOR ALLTRANSPORTATION AND  
INSURANCE CHARGES FORTHE DAV PRODUCTTO AND  
FROMTHE ASP.  
b. Replacement of missing, discarded or lost parts, the  
provision of retrofits, or preventive maintenance;  
c. Repair of damage that is cosmetic only or does not affect  
the DAV Product functionality, such as wear and tear,  
scratches and dents;  
d. Service on Toshiba-branded accessory items (such  
accessory items may be covered by their own warranty);  
e. Service on third party products or service made necessary  
by use of incompatible third party products;  
f. Service made necessary by the simultaneous use of this  
DAV Product and connected equipment;  
Rental Units  
g. Modifications to the DAV Product not approved in writing  
by TCL, and service made necessary by the use or  
installation of non-Toshiba modifications to the DAV  
Product;  
The warranty for DAV Product rental units begins with the  
date of first rental or thirty (30) days from the date of shipment  
to the rental firm, whichever comes first.  
LimitedWarranty for Commercial Units  
h. Service of a DAV Product on which the TOSHIBA label or  
logo, rating label or serial number have been defaced or  
removed;  
TCL warrants DAV Products that are used for any commercial  
or business purposes as follows: all parts are warranted  
against material defects in materials or workmanship that  
result in the DAV Product failing for a period of ninety (90)  
days after the date of original retail purchase. DURINGTHIS  
PERIOD, TCL WILL, AT TCLS OPTION, REPAIR OR  
i. On-site service and repair of the DAV Product;  
j. Damage to the DAV Product caused by failure to follow the  
specifications, User manuals or guides as to usage and/or  
storage.  
REPLACE  
A
DEFECTIVE PART WITH  
A
NEW OR  
REFURBISHED PART, WITHOUT CHARGE TO YOU FOR  
PARTS OR LABOUR. YOU MUST DELIVER THE ENTIRE  
DAV PRODUCT TO AN ASP. YOU MUST PAY FOR ALL  
TRANSPORTATION AND INSURANCE CHARGES FORTHE  
DAV PRODUCTTO AND FROMTHE ASP.  
Disclaimer and Limitation of Remedy  
TO THE EXTENT NOT PRECLUDED BY LAW, ALL OTHER  
EXPRESS AND IMPLIED WARRANTIES, CONDITIONS AND  
REPRESENTATIONS FORTHIS DAV PRODUCT, INCLUDING  
THE IMPLIED WARRANTIES AND CONDITIONS OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED. IF  
THE APPLICABLE LAW, STATUTORY OR OTHERWISE,  
PRECLUDES THE EXCLUSION OF ANY IMPLIED  
WARRANTIES,CONDITIONS AND REPRESENTATIONSTHEN  
SUCH IMPLIED WARRANTIES, CONDITIONS AND  
REPRESENTATIONS ARE OTHERWISE LIMITED IN  
DURATION TO THE TEAM OF THIS EXPRESS WRITTEN  
LIMITEDWARRANTY.TOTHE EXTENT NOT PRECLUDED BY  
LAW, STATUTORY OR OTHERWISE, THIS WRITTEN  
WARRANTY SUPERCEDES AND SPECIFICALLY DISCLAIMS  
ANY OTHERWARRANTY,CONDITION OR REPRESENTATION  
NOT STATED INTHISWARRANTY,WHETHER MADE BYTCL,  
TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs AND  
ASPs AND WHETHER MADE ORALLY OR IN WRITING  
(INCLUDING ANY STATEMENT IN ANY BROCHURE, PRESS  
RELEASE, ANNOUNCEMENT, ADVERTISEMENT, POINT OF  
SALE DISPLAY, ETC.).  
Your Responsibility  
THE ABOVE WARRANTIES ARE SUBJECT TO THE  
FOLLOWING CONDITIONS:  
(1) You must provide your bill of sale or other proof of purchase.  
(2) All warranty servicing of this DAV Product must be performed  
by an ASP.  
(3) The warranties fromTCL are effective only if the DAV Product  
is (i) purchased as new and unopened from TCL or from  
TCLs authorized distributors, dealers or resellers (“ADR’s”)  
and (ii) located/operated in Canada.  
(4) Warranties extend only to material defects in materials or  
workmanship as limited above, and do not extend to:  
a. Service, repairs or replacement made necessary by  
accident, misuse, abuse, moisture, liquids, dust, dirt,  
neglect, accident, damage, 24/7 applications, improper  
installation, improper operation, improper cleaning,  
improper maintenance, normal wear and tear, or any other  
external cause or event, act or omission outside the  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YOU MUST READ AND FOLLOW ALL SET-UP AND USAGE  
INSTRUCTIONS INTHE APPLICABLE USER GUIDES AND/OR  
MANUALS.IFYOU FAIL TO DO SO,THIS DAV PRODUCT MAY  
NOT FUNCTION PROPERLY ANDYOU MAY SUFFER DAMAGE.  
THIS WARRANTY WILL NOT COVER ANY SERVICE THAT IS  
REQUIRED, IN PART OR IN WHOLE, AS A RESULT OF ANY  
FAILURE TO FOLLOW THE SET-UP AND USAGE  
INSTRUCTIONS. THIS WARRANTY DOES NOT APPLY AND  
SHALL BE VOID AND UNENFORCEABLE IF THE DAV  
PRODUCT IS OPENED, SERVICED, OR REPAIRED BY  
PERSONS OTHER THAN THOSE AUTHORIZED BY TCL TO  
SERVICE OR REPAIRTHE DAV PRODUCT.  
Critical Applications  
The DAV Product you have purchased is not designed for any  
“critical applications.Critical applications” means life support  
systems, medical applications, connections to implanted  
medical devices, commercial transportation, nuclear facilities  
or systems or any other applications where DAV Product failure  
could lead to injury to persons or loss of life or catastrophic  
property damage.  
IF THE CUSTOMER USES THE DAV PRODUCT IN ANY  
CRITICAL APPLICATION, THE CUSTOMER-AND NOTTCL,  
ITS AFFILIATES, ADRs OR ASPs - ASSUME SOLE AND  
FULL RESPONSIBILITY FOR SUCH USE.TCL RESERVES  
THE RIGHTTO REFUSETO SERVICE ANY DAV PRODUCT  
USED IN A CRITICAL APPLICATION.TCL, ITS AFFILIATES,  
ADRs and ASPs HEREBY DISCLAIM ANY AND ALL  
LIABILITY, DAMAGES AND CONSEQUENCES ARISING  
OUT OF THE SERVICE OR REFUSAL TO SERVICE SUCH  
DAV PRODUCT AND FURTHER DISCLAIM ANY AND ALL  
LIABILITY, CONSEQUENCES AND DAMAGES THAT MAY  
ARISE OR RESULT FROMTHE USE OFTHE DAV PRODUCT  
IN ANY CRITICAL APPLICATIONS.  
IF THE DAV PRODUCT FAILS TO WORK AS WARRANTED  
ABOVE, YOUR SOLE AND EXCLUSIVE REMEDY SHALL BE  
REPAIR OR REPLACEMENT OF THE DEFECTIVE PART. IN  
NO EVENT WILL TCL, TOSHIBA CORPORATION, THEIR  
AFFILIATES, ADRs OR ASPs (THE “RELATED PARTIES”) BE  
LIABLETOYOU OR ANYTHIRD PARTY FOR ANY DAMAGES.  
MONEY, REIMBURSEMENT, COSTS OR EXPENSES. THIS  
LIMITATION APPLIES TO DAMAGES, MONEY,  
REIMBURSEMENT, COSTS OR EXPENSES OF ANY KIND  
WHATSOEVER INCLUDING ANY DIRECT OR INDIRECT  
DAMAGES, DAMAGE TO PROPERTY OR PERSON, LOST  
PROFITS, LOST SAVINGS, INCONVENIENCE OR OTHER  
SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL  
DAMAGES, WHETHER FOR BREACH OF WARRANTY,  
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE),  
UNDER A STATUTE OR UNDER ANY OTHER LAW OR FORM  
OR ACTION, OR WHETHER ARISING OUT OF THE USE OF  
OR INABILITYTO USETHE DAV PRODUCT, EVEN IF ANY OF  
THE RELATED PARTIES HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY  
ANY OTHER PARTY.  
General Provisions  
If and to the extent that any provision of this limited warranty  
should generally be found to be unenforceable, the  
unenforceable provision shall be severed from the warranty  
and deemed not to form part of the warranty. The remaining  
provisions of this warranty shall be and remain valid and  
enforceable. If and to the extent that any provision of this  
limited warranty as it relates to any of the Related Parties is  
found to be invalid or unenforceable in respect of that party  
(the “Excluded Party”), the Excluded Party shall be deemed  
to be severed or excluded from the provision, and the provision  
shall remain valid, enforceable and applicable in respect of  
the other or remaining Related Parties.  
No person, agent, distributor, dealer or company is authorized to  
change, modify or extend the terms of these warranties in any  
manner whatsoever.  
Arbitration and Dispute Resolution  
To the extent not precluded by law, any claim, dispute,  
controversy or disagreement (whether for breach of warranty,  
breach of contract, tort (including negligence), under a statute  
or under any other law or form of action) against any of the  
Related Parties arising out of , or otherwise relating to: (i) this  
warranty; (ii) the DAV Product; (iii) any oral or written  
representations, statements, brochures, press releases,  
advertising, announcement, point of sale display, or promotional  
material relating to the DAV Product; (iv) the relationships that  
result from this warranty, (the foregoing claims, disputes  
controversies and disagreements are collectively referred to as  
the “Dispute”), shall be referred to and resolved by final and  
binding arbitration (to the exclusion of the courts).To the extent  
not precluded by law, you agree to waive any right that you may  
have to commence or participate in any representative or class  
proceeding against the Related Parties relating to any Dispute.  
If and where applicable and to the extent not precluded by law,  
you further agree to opt out of any such representative or class  
proceedings. Arbitration of any Dispute will be conducted in the  
forum and in the manner as agreed to between you and TCL.  
Failing such agreement, the arbitration will be conducted by one  
arbitrator pursuant to the laws and rules relating to arbitration  
generally in force in the jurisdiction in which you reside at the  
time that the Dispute arises.To the extent not precluded by law,  
no claim, dispute, controversy or disagreement of any other  
person may be joined or combined with any Dispute by you,  
without the prior written consent of TCL.  
To the extent permitted by law, this limited warranty shall be  
governed and construed in accordance with the laws of Ontario.  
If there is any inconsistency between this limited warranty, on  
the one hand, and any statement in the packaging of the DAV  
Product or in any other document enclosed with, or used in  
the context of the promotion or sale of, the DAV Product, on  
the other hand, the provisions of this limited warranty shall  
prevail.  
How to ObtainWarranty Services  
If, after following all of the operating instructions in this manual  
and checking the “Before Calling Service Personnel” section,  
you find that service is needed:  
(1) To find the nearest ASP, visit TCLs web site at  
(2) Present your bill of sale or other proof of purchase to the  
ASP.  
For additional information, visitTCLs website: www.toshiba.ca  
811-SD6191W010  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tekram Technology CRT Television CaptureTV M205 User Manual
Tiger Games 6247160200 User Manual
Timex Heart Rate Monitor M515 User Manual
TIMEX Weather Products Thermometer TX3070 User Manual
TOA Electronics Digital Camera C CV14 2 NTSC User Manual
Toshiba Laptop Z10T A1111 User Manual
Triax Satellite TV System SR 26 User Manual
Velodyne Acoustics Car Amplifier SC 602 User Manual
Victory Refrigeration Refrigerator ACRS 1D S7 SST User Manual
ViewSonic Computer Monitor A90F+ User Manual