Toshiba DVD Player SD 4205 User Manual

OWNER'S MANUAL  
DIGITAL VIDEO  
DVD VIDEO PLAYER  
SD-4205  
Aug., 2000 s  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
SAFETY PRECAUTIONS  
The lightning flash with arrowhead symbol, within an equilat-  
WARNING  
eral triangle, is intended to alert the user to the presence of  
uninsulated “dangerous voltage” within the product’s enclo-  
sure that may be of sufficient magnitude to constitute a risk  
of electric shock to persons.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
RISQUE DE CHOC ELECTRIQUE NE  
AVIS  
PAS OUVRIR  
WARNING :  
TO REDUCE THE RISK OF  
The exclamation point within an equilateral triangle is in-  
tended to alert the user to the presence of important operat-  
ing and maintenance (servicing) instructions in the literature  
accompanying the appliance.  
ELECTRIC SHOCK, DO NOT REMOVE  
COVER (OR BACK). NO USERSERVICEABLE  
PARTS INSIDE. REFER SERVICING TO  
QUALIFIED SERVICE PERSONNEL.  
WARNING:  
CAUTION:  
TO REDUCETHE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSETHIS APPLIANCE  
TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE  
ENCLOSURE. DO NOT OPENTHE CABINET. REFER SERVICINGTO QUALIFIED PERSONNEL  
ONLY.  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY  
INSERT.  
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA  
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.  
CAUTION:  
This Digital Video Disc Player employs a Laser System.  
To ensure proper use of this product, please read this owner’s manual carefully and retain for  
future reference. Should the unit require maintenance, contact an authorized service location -  
see service procedure.  
Use of controls or adjustments or performance of procedures other than those specified herein  
may result in hazardous radiation exposure.  
To prevent direct exposure to laser beam, do not try to open the enclosure.  
Visible and invisible laser radiation when open and interlocks defeated.  
DO NOT STARE INTO BEAM.  
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications.  
However, there is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
WARNING:  
Changes or modifications made to this equipment, not expressly approved by Toshiba, or  
parties authorized by Toshiba, could void the user’s authority to operate the equipment.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video  
player.  
Model No.  
Serial No.  
Retain this information for future reference.  
Location of the required label  
THIS DEVICE COMPLIES WITH PART 15 OF  
THE FCC RULES. OPERATION IS SUBJECT  
TO THE FOLLOWING TWO CONDITIONS:  
(1)THISDEVICEMAYNOTCAUSEHARMFUL  
INTERFERENCE,AND(2)THISDEVICEMUST  
ACCEPT ANY INTERFERENCE RECEIVED,  
INCLUDINGINTERFERENCETHATMAYCAUSE  
UNDESIRED OPERATION.  
MANUFACTURED:  
TOS HIBA CORP ORATION  
1-1, SHIBAURA 1-CHOME, MINATO-KU, TOKYO 105-01, JAPAN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS  
OWNERS MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR  
FUTURE REFERENCE.  
This set has been designed and manufactured to assure personal safety. Improper use can result in electric  
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following  
procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that  
can be repaired by the user.  
DO NOT REMOVE THE CABINET COVER, ORYOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.  
1. Read owner’s manual  
After unpacking this product, read the owner’s manual carefully, and follow  
all the operating and other instructions.  
2. Power Sources  
This product should be operated only from the type of power source indicated  
on the label. If you are not sure of the type of power supply to your home,  
consult your product dealer or local power company. For products intended  
to operate from battery power, or other sources, refer to the operating  
instructions.  
3. Grounding or Polarization  
This product may be equipped with a polarized alternating current line plug  
(a plug having one blade wider than the other). This plug will fit into the  
power outlet only one way. This is a safety feature. If you are unable to insert  
the plug fully into the outlet, try reversing the plug. If the plug should still fail  
to fit, contact your electrician to replace your obsolete outlet. Do not defeat  
the safety purpose of the polarized plug.  
4. Ventilation  
Slots and openings in the cabinet are provided for ventilation and to ensure  
reliable operation of the product and to protect it from overheating, and these  
openings must not be blocked or covered. The openings should never be  
blocked by placing the product on a bed, sofa, rug or other similar surface.  
This product should not be placed in a built-in installation such as a bookcase  
or rack unless proper ventilation is provided or the manufacturer’s instructions  
have been adhered to.  
5. Heat  
The product should be situated away from heat sources such as radiators,  
heat registers, stoves, or other products (including amplifiers) that produce  
heat.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Water and Moisture  
Do not use this product near water - for example, near a bath tub, wash bowl,  
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool and  
the like.  
7. Cleaning  
Unplug this product from the wall outlet before cleaning. Do not use liquid  
cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
8. Power-Cord Protection  
Power-supply cords should be routed so that they are not likely to be walked  
on or pinched by items placed upon or against them, paying particular attention  
to cords at plugs, convenience receptacles, and the point where they exit  
from the product.  
9. Overloading  
Do not overload wall outlets; extension cords, or integral convenience  
receptacles as this can result in a risk of fire or electric shock.  
10.Lightning  
For added protection for this product during storm, or when it is left unattended  
and unused for long periods of time, unplug it from the wall outlet. This will  
prevent damage to the product due to lightning and power-line surges.  
11. Object and Liquid Entry  
Never insert objects of any kind into this product through openings as they  
may touch dangerous voltage points or short-out parts that could result in a  
fire or electric shock. Never spill liquid of any kind on the product.  
12.Attachments  
Do not use attachments not recommended by the product manufacturer as they may cause hazards.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
IMPORTANT SAFETY INSTRUCTIONS  
13.Accessories  
Do not place this product on an unstable cart, stand, tripod, bracket, or table.  
The product may fall, causing serious injury to a child or adult, and serious  
damage to the product. Use only with a cart, stand, tripod, bracket, or table  
recommended by the manufacturer, or sold with the product. Any mounting  
of the product should follow the manufacturer’s instructions, and should use  
a mounting accessory recommended by the manufacturer.  
A product and cart combination should be moved with care. Quick stops,  
S3125A  
excessive force, and uneven surfaces may cause the product and cart  
combination to overturn.  
14.Disc Tray  
Keep your fingers well clear of the disc tray as it is closing. Neglecting to do  
so may cause serious personal injury.  
15.Burden  
Do not place a heavy object on or step on the product. The object may fall,  
causing serious personal injury and serious damage to the product.  
16.Headphones  
When you use headphones, keep the volume at a moderate level. If you use  
the headphones continuously with high volume sound, it may cause hearing  
damage.  
17.Disc  
Do not use a cracked, deformed, or repaired disc. These discs are easily  
broken and may cause serious personal injury and product malfunction.  
18.Damage Requiring Service  
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following  
conditions:  
a) When the power-supply cord or plug is damaged.  
b) If liquid has been spilled, or objects have fallen into the product.  
c) If the product has been exposed to rain or water.  
d) If the product does not operate normally by following the operating instructions. Adjust only those  
controls that are covered by the operating instructions as an improper adjustment of other controls may  
result in damage and will often require extensive work by a qualified technician to restore the product  
to its normal operation.  
e) If the product has been dropped or damaged in any way.  
f) When the product exhibits a distinct change in performance - this indicates a need for service.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
19.Servicing  
Do not attempt to service this product yourself as opening or removing covers  
may expose you to dangerous voltage or other hazards. Refer all servicing  
to qualified service personnel.  
20.Replacement Parts  
When replacement parts are required, be sure the service technician has used replacement parts specified  
by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may  
result in fire, electric shock, or other hazards.  
21.Safety Check  
Upon completion of any service or repairs to this product, ask the service  
technician to perform safety checks to determine that the product is in proper  
operating condition.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Precautions  
Notes on handling  
Notes on moisture condensation  
When shipping the DVD video player, the original  
shipping carton and packing materials come in handy.  
For maximum protection, repack the unit as it was  
originally packed at the factory.  
Do not use volatile liquids, such as insect spray, near  
the DVD video player. Do not leave rubber or plastic  
products in contact with the DVD video player for a  
long time. They will leave marks on the finish.  
The top and rear panels of the DVD video player may  
become warm after a long period of use. This is not a  
malfunction.  
Moisture condensation damages the DVD video  
player. Please read the following carefully.  
Moisture condensation occurs, for example, when you  
pour a cold drink into a glass on a warm day. Drops of  
water form on the outside of the glass. In the same way,  
moisture may condense on the optical pick-up lens  
inside this unit, one of the most crucial internal parts of  
the DVD video player.  
o
f
n
s
When the DVD video player is not in use, be sure to  
remove the disc and turn off the power.  
If you do not use the DVD video player for a long  
period, the unit may not function properly in the  
future. Turn on and use the DVD video player  
occasionally.  
Optical pick-up  
lens  
Moisture condensation occurs during the  
following cases.  
When you bring the DVD video player directly from a  
cold place to a warm place.  
Notes on locating  
When you use the DVD video player in a room where  
you just turned on the heater, or a place where the  
cold wind from the air conditioner directly hits the unit.  
In summer, when you use the DVD video player in a  
hot and humid place just after you move the unit from  
an air conditioned room.  
Place the DVD video player on a level surface. Do not  
use it on a shaky or unstable surface such as a  
wobbling table or inclined stand. The loaded disc may  
come off the proper position and cause damage to  
the DVD video player.  
When you place this DVD video player near a TV,  
radio, or VCR, the playback picture may become poor  
and the sound may be distorted. In this case, place  
the DVD video player away from the TV, radio, or  
VCR.  
When you use the DVD video player in a humid place.  
Notes on cleaning  
Use a soft, dry cloth for cleaning.  
For stubborn dirt, soak the cloth in a weak detergent  
solution, wring well and wipe. Use a dry cloth to wipe  
it dry.  
Do not use the DVD video player when moisture  
condensation may occur.  
Do not use any type of solvent, such as thinner and  
benzine, as they may damage the surface of the DVD  
video player.  
If you use a chemical saturated cloth to clean the unit,  
follow that products instructions.  
If you use the DVD video player in such a situation, it  
may damage discs and internal parts. Remove the  
disc, connect the power cord of the DVD video player  
to the wall outlet, turn on the DVD video player, and  
leave it for two or three hours. After two or three  
hours, the DVD video player will have warmed up and  
evaporated any moisture. Keep the DVD video player  
connected to the wall outlet and moisture  
To obtain a clear picture  
condensation will seldom occur.  
The DVD video player is a high technology, precision  
device. If the optical pick-up lens and disc drive parts  
are dirty or worn down, the picture quality becomes  
poor. To obtain a clear picture, we recommend regular  
inspection and maintenance (cleaning or parts  
replacement) every 1,000 hours of use depending on  
the operating environment. For details, contact your  
nearest dealer.  
Wall outlet  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on Discs  
On handling discs  
Structure of disc contents  
Do not touch the playback side of the disc.  
Normally, DVD video discs are divided into titles, and  
the titles are sub-divided into chapters. VIDEO CDs/  
audio CDs are divided into tracks.  
DVD video disc  
DVD video disc  
Title 1  
Title 2  
Chapter 1 Chapter 2  
Chapter 1 Chapter 2 Chapter 3  
Playback side  
Do not attach paper or tape to discs.  
VIDEO CD/Audio CD  
VIDEO CD/Audio CD  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
On cleaning discs  
Fingerprints and dust on the disc cause picture and  
sound deterioration. Wipe the disc from the center  
outwards with a soft cloth. Always keep the disc  
clean.  
Each title, chapter or track is assigned a number, which  
is called title number, chapter numberor track  
numberrespectively.  
There may be discs that do not have these numbers.  
Notes on copyright  
It is forbidden by law to copy, broadcast, show,  
broadcast on cable, play in public, and rent copyrighted  
material without permission.  
If you cannot wipe off the dust with a soft cloth, wipe  
the disc lightly with a slightly moistened soft cloth and  
finish with a dry cloth.  
Do not use any type of solvent such as thinner,  
benzine, commercially available cleaners or antistatic  
spray for vinyl LPs. It may damage the disc.  
DVD video discs are copy protected, and any recordings  
made from these discs will be distorted.  
This product incorporates copyright protection  
technology that is protected by method claims of certain  
U.S. patents and other intellectual property rights owned  
by Macrovision Corporation and other rights owners.  
Use of this copyright protection technology must be  
authorized by Macrovision Corporation, and is intended  
for home and other limited viewing uses only unless  
otherwise authorized by Macrovision Corporation.  
Reverse engineering or disassembly is prohibited.  
On storing discs  
Do not store discs in a place subject to direct sunlight  
or near heat sources.  
Do not store discs in places subject to moisture and  
dust such as a bathroom or near a humidifier.  
Store discs vertically in a case. Stacking or placing  
objects on discs outside of their case may cause  
warping.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Notes on Discs (continued)  
About this owners manual  
Playable discs  
This owners manual explains the basic instructions of  
this DVD video player. Some DVD video discs are  
produced in a manner that allows specific or limited  
operation during playback. As such, the DVD video  
player may not respond to all operating commands. This  
is not a defect in the DVD video player. Refer to  
instruction notes of discs.  
This DVD video player can play the following discs.  
Maximum  
playback time  
Disc  
Size  
Disc Mark Contents  
Approx. 4 hours  
(single sided disc)  
12 cm  
Audio  
+
video  
(moving  
pictures)  
Approx. 8 hours  
(double sided disc)  
DVD  
video  
discs  
may appear on the TV screen during operation.  
A “ ” means that the operation is not permitted by the  
DVD video player or the disc.  
Approx. 80 minutes  
(single sided disc)  
8 cm  
Notes on region numbers  
Approx. 160 minutes  
(double sided disc)  
The region number of this DVD video player is 1. If  
region numbers, which stand for their playable area, are  
1
Approx. 74 minutes  
Approx. 20 minutes  
printed on your DVD video disc and you do not find  
12 cm  
Audio  
+
video  
(moving  
pictures)  
ALL  
or  
, disc playback will not be allowed by the player.  
VIDEO  
CDs  
(In this case, the DVD video player will display a  
message on-screen.)  
DIGITAL VIDEO  
8 cm  
On VIDEO CDs  
This DVD video player supports VIDEO CDs equipped  
with the PBC (Version 2.0) function. (PBC is the  
abbreviation of Playback Control.) You can enjoy two  
playback variations depending on types of discs.  
Approx. 74 minutes  
Approx. 20 minutes  
12 cm  
Audio  
CDs  
Audio  
8 cm  
(CD  
single)  
VIDEO CD not equipped with PBC function  
(Version 1.1)  
The following discs are also available.  
Sound and movie can be played on this DVD video  
player in the same way as an audio CD.  
VIDEO CD equipped with PBC function  
(Version 2.0)  
CD-R  
CD-RW  
CD-R/RW discs recorded by CD-DA method can be  
played. Some CD-R/RW discs may be incompatible.  
In addition to operation of a VIDEO CD not equipped  
with the PBC function, you can enjoy playback of  
interactive software with search function by using the  
menu displayed on the TV screen (Menu Playback).  
Some of the functions described in this owners  
manual may not work with some discs.  
You cannot play discs other than those listed above.  
You cannot play discs of DVD-RAM, DVD-RW, etc.,  
even if they may be labeled marks listed above.  
This DVD video player uses the NTSC color system,  
and cannot play DVD video discs recorded in any  
other color system (PAL, SECAM, etc.).  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Introduction  
Advanced playback  
SAFETY PRECAUTIONS ..........................2  
IMPORTANT SAFETY INSTRUCTIONS ...4  
Precautions ...............................................8  
Notes on Discs..........................................9  
Notes on region numbers ............................... 10  
Accessing a Specific Location Directly .. 34  
Entering the time of the desired location ........ 34  
Playing Repeatedly.................................35  
Repeating a title, chapter, or track .................. 35  
Repeating a specific segment ........................ 35  
Playing in a Favorite Order ....................36  
Setting titles, chapters, or tracks in a favorite  
order ............................................................. 36  
Table of Contents ................................... 11  
Identification of Controls .......................12  
Front panel ..................................................... 12  
Rear panel ...................................................... 12  
DVD display .................................................... 13  
Remote control ............................................... 14  
Loading batteries ............................................ 15  
Operating with the remote control .................. 15  
Playing in Random Order.......................37  
Playing titles, chapters or tracks in random  
order ............................................................. 37  
Zooming a Picture ..................................38  
Zooming a picture........................................... 38  
Selecting DNR Picture Enhancement ...39  
Selecting DNR picture enhancement ............. 39  
Connections  
Connecting to a TV .................................18  
Selecting 3-D (N-2-2) Sound Enhancement .. 39  
Selecting 3-D (N-2-2) sound enhancement .... 39  
Connecting to a TV ......................................... 18  
Selecting the Camera Angle ..................40  
Changing the camera angle ........................... 40  
Connecting to an audio system and TV  
equipped with ColorStream® (Component  
video) inputs................................................. 19  
Selecting Subtitles .................................41  
Selecting a subtitle language ......................... 41  
Connecting to Optional Equipment ......20  
Connecting to an amplifier equipped with a  
Dolby Digital decoder ................................... 21  
Selecting a Language.............................42  
Selecting a playback audio setting ................. 42  
Connecting to an amplifier equipped with  
Dolby Pro Logic Surround ............................ 21  
Connecting to an amplifier equipped with a  
DTS decoder ................................................ 22  
Connecting to an amplifier equipped with an  
MPEG2 audio decoder ................................. 22  
Connecting to an amplifier equipped with  
5.1ch audio inputs ........................................ 23  
Connecting to an amplifier equipped with a  
digital audio input ......................................... 23  
Quick control  
Using the Graphic Remote Control  
- V-REMOTE - ...........................................46  
Selecting the Playback Function  
- QUICK -..................................................47  
Accessing Features  
- NAVI - .....................................................48  
Function setup  
Basic playback  
Customizing the Function Settings ......54  
Setting procedure ........................................... 54  
Setting details ................................................. 56  
Playing a Disc .........................................26  
Basic playback ............................................... 26  
Playing in fast reverse or  
fast forward directions .................................. 28  
Playing frame by frame................................... 28  
Playing in slow-motion .................................... 29  
Resuming playback from the same location ... 29  
Table of Languages ................................64  
Operating a TV with the Remote  
Control .....................................................65  
Others  
Locating a Specific Title, Chapter, or  
Track ........................................................30  
Locating a title using the top menu................. 30  
Locating a title by entering the title number.... 30  
Locating a specific chapter or track directly ... 31  
Locating a specific chapter or track ................ 31  
Before Calling Service Personnel .........68  
Specifications .........................................69  
LIMITED WARRANTY DVD VIDEO  
PLAYER ...................................................70  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Identification of Controls  
See the page in  
for details.  
Front panel  
POWER indicator  
PAUSE button  
26  
DISC SKIP (UP/DOWN) buttons  
27  
26  
MENU button  
TOP MENU button  
STOP button  
27  
DVD display  
26  
PLAY button  
26  
30  
DISC SKIP  
DOWN UP  
PAUSE  
STOP  
PLAY  
TOP MENU  
MENU  
ENTER  
SKIP  
1
2
3
4
5
RETURN  
DISC SELECT  
OPEN/CLOSE  
POWER  
Disc tray  
RETURN button  
SKIP buttons  
26  
54  
31  
OPEN/CLOSE button  
26  
DISC SELECT buttons  
26  
Cursor control/ENTER button  
54  
POWER button  
26  
Rear panel  
ColorStream® (Component video) VIDEO OUT jacks (Y/PB/PR  
)
19  
S VIDEO OUT jack  
18  
18  
VIDEO OUT jack  
AC IN  
Y
PB  
PR  
S
VIDEO COAXIAL OPTICAL  
BITSTREAM/PCM  
VIDEO OUT  
AUDIO OUT  
AUDIO OUT  
2CH  
5.1CH SURROUND  
FRONT SURROUND CENTER  
L
R
SUBWOOFER  
BITSTREAM/PCM OPTICAL  
AUDIO OUT jack  
Power cord  
21 22 23  
When connecting the optical digital  
cable, remove the cap and fit the  
connector into the jack firmly.  
When not using the jack, keep the  
cap inserted to protect it from dust  
intrusion.  
BITSTREAM/PCM COAXIAL  
AUDIO OUT jack  
21 22 23  
5.1CH SURROUND AUDIO OUT jacks 23  
2CH AUDIO OUT jacks 18 19  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeated pressing of the FL DIMMER button on  
the remote control changes the brightness of the  
display.  
DVD display  
Normal  
Dimmed  
Off  
FL DIMMER  
Memory playback indicator  
Random playback indicator  
Total playing time/remaining time/  
elapsed time indicators  
Repeat playback indicator  
Angle icon indicator  
Chapter number indicator  
VIDEO CD/CD indicator  
Title/track number indicator  
HDCD indicator  
DVD indicator  
Disc number  
indicator  
MEMORY A-B  
TOTAL REMAIN RANDOM REPEAT  
SVCD  
HDCD  
DVD-AUDIO  
Play mode  
indicator  
DISC  
TITLE GROUP  
CHP TRK  
1 2 3 4 5  
Disc indicator  
Multifunctional indicator  
(Indicates operating status or message, etc.)  
The indicators vary depending on the kinds of discs you play.  
DVD video disc  
VIDEO CD  
Audio CD  
During playback:  
During playback:  
During playback:  
Example  
Example  
Example  
MEMORY A-B  
TOTAL REMAIN RANDOM REPEAT  
SVCD  
MEMORY A-B  
TOTAL REMAIN RANDOM REPEAT  
SVCD  
MEMORY A-B  
TOTAL REMAIN RANDOM REPEAT  
SVCD  
DVD  
-
AUDIO  
DVD-AUDIO  
DVD-AUDIO  
DISC  
TITLE GROUP  
CHP TRK  
DISC  
TITLE GROUP  
CHP TRK  
DISC  
TITLE GROUP  
CHP TRK  
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
Playing track 6 Elapsed time of  
the current track  
Playing track 6 Elapsed time of  
the current track  
Playing chapter 3 Elapsed time of  
of title 2  
the current title  
Some discs may not display  
chapter numbers.  
Some discs may not display track  
numbers or elapsed time.  
A time indication not accompanied  
with a chapter number shows  
elapsed time of a segment within  
the current title.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Identification of Controls (continued)  
The instructions in this manual describe the functions on the remote control. See the page in  
for details.  
Remote control  
POWER button 26  
NAVI button 48  
OPEN/CLOSE button 26  
POWER  
OPEN/CLOSE  
QUICK  
ANGLE  
SETUP  
NAVI  
QUICK button 47  
SETUP button 54  
SUBTITLE  
AUDIO  
ANGLE button 40  
AUDIO button 42  
V-REMOTE button 46  
SUBTITLE button 41  
TOP MENU button 30  
MENU button*  
54  
Cursor control/ENTER button  
Cursor control to move the cursor  
Push toward the direction  
you want.  
ENTER  
Jog control 27 28  
CLEAR  
RETURN  
ENTER button to enter your  
selection  
RETURN button 54  
SLOW  
SKIP  
Press the center vertically.  
SKIP buttons 31  
STOP  
ZOOM  
PLAY  
PAUSE/STEP  
CLEAR button 31  
PLAY button 26  
SLOW buttons 29  
STOP button 27  
PAUSE/STEP button 27  
ZOOM buttons 38  
DNR  
3D  
1
4
7
DNR button 39  
3D button 39  
T button 30  
FL DIMMER  
2
5
8
13  
FL DIMMER button  
SEARCH  
T
3
6
+10  
Number buttons 30  
9
0
RANDOM MEMORY  
REPEAT  
A-B RPT  
A-B RPT button 35  
REPEAT button 35  
MEMORY button 36  
RANDOM button 37  
DISC SKIP  
Lift to open the cover.  
DISC SELECT  
1
TV  
POWER TV/VIDEO  
2
3
CH  
VOL  
DISC SKIP buttons 26  
4
5
DISC SELECT buttons 26  
* MENU button  
TV/VIDEO button 65  
POWER button 65  
VOL buttons 65  
CH buttons 65  
Use the MENU button to display the  
menu included on many DVD video  
discs. To operate a menu, follow the  
instructions in Locating a title using  
30  
the top menu.”  
When closed  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading batteries  
Operating with the remote control  
Open the cover.  
Point the remote control at the remote  
sensor and press the buttons.  
1
30°  
30°  
Within about 7 m (23 feet)  
Insert batteries (AAA size).  
2
Distance: About 7 m (23 feet) from the front of the  
remote sensor  
Angle: About 30° in each direction of the front of  
the remote sensor  
Make sure to match the + and on the batteries  
to the marks inside the battery compartment.  
* Do not expose the remote sensor of the DVD video  
player to a strong light source such as direct  
sunlight or other illumination. If you do so, you may  
not be able to operate the DVD video player via the  
remote control.  
Close the cover.  
3
Notes on the remote control  
Direct the remote control at the remote sensor of the DVD  
video player.  
Do not drop or give the remote control a shock.  
Do not leave the remote control near an extremely hot or  
humid place.  
Do not spill water or put anything wet on the remote  
control.  
Do not open the remote control.  
Notes on batteries  
Improper use of batteries may cause battery leakage and  
corrosion. To operate the remote control correctly, follow the  
instructions below.  
Do not insert batteries into the remote control in the wrong  
direction.  
Do not charge, heat, open, or short-circuit the batteries.  
Do not throw batteries into a fire.  
Do not leave dead or exhausted batteries in the remote  
control.  
Do not use different types of batteries together, or mix old  
and new batteries.  
If you do not use the remote control for a long period of  
time, remove the batteries to avoid possible damage from  
battery corrosion.  
If the remote control does not function correctly or if the  
operating range becomes reduced, replace all batteries  
with new ones.  
If battery leakage occurs, wipe the battery liquid from the  
battery compartment, then insert new batteries.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Read this chapter first to make all necessary  
preparations.  
Connecting to a TV  
Connecting to an audio system  
and TV equipped with  
component video inputs  
Connecting to an amplifier  
equipped with a Dolby Digital  
decoder  
Connecting to an amplifier  
equipped with Dolby Pro Logic  
Surround  
Connecting to an amplifier  
equipped with a DTS decoder  
Connecting to an amplifier  
equipped with an MPEG2 audio  
decoder  
Connecting to an amplifier  
equipped with 5.1ch audio  
inputs  
Connecting to an amplifier  
equipped with a digital audio  
input  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to a TV  
Connect the DVD video player to your TV.  
For details of output sound, see 43  
.
Connecting to a TV  
Signal flow  
AC IN  
Y
P
B
P
R
S
VIDEO COAXIAL OPTICAL  
BITSTREAM/PCM  
VIDEO OUT  
AUDIO OUT  
AUDIO OUT  
2CH  
5.1CH SURROUND  
FRONT SURROUND CENTER  
L
R
SUBWOOFER  
To S  
(red)  
(white)  
(yellow)  
VIDEO  
OUT  
To VIDEO OUT  
To wall outlet  
To 2CH  
AUDIO OUT  
Audio/video cable  
(supplied)  
To audio inputs  
To video input  
(yellow)  
(red) (white)  
To S video input  
S video cable (not supplied)  
If the TV has an S video input, connect the  
DVD video player with an S video cable.  
When using an S video cable, do not  
connect the yellow video cable.  
TV or monitor with  
audio/video inputs  
• Make the following setting.  
On-screen display  
Select:  
Page  
54  
57  
“Audio Out Select” “Analog 2ch”  
Notes  
• Refer to the owner’s manual of the connected TV as well.  
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet  
before making any connections.  
• If your television set has one audio input, connect the DVD video player to a Y cable adapter (not supplied) and then connect  
to your TV.  
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or  
video selector, the playback picture may be distorted as DVD video discs are copy protected.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an audio system and TV equipped with ColorStream® (Component video) inputs  
Signal flow  
AC IN  
Y
PB  
P
R
S
VIDEO COAXIAL OPTICAL  
BITSTREAM/PCM  
VIDEO OUT  
AUDIO OUT  
AUDIO OUT  
2CH  
5.1CH SURROUND  
FRONT SURROUND CENTER  
L
R
SUBWOOFER  
To Y  
To PB  
To PR  
(red)  
(white)  
VIDEO VIDEO VIDEO  
OUT  
OUT OUT  
To 2CH  
AUDIO  
OUT  
To wall outlet  
To PB (CB) video input  
To PR (CR) video input  
To Y video input  
(white)  
To audio inputs of the amplifier  
(red)  
Audio system  
TV or monitor with  
component video inputs  
ColorStream® (Component video) outputs/inputs  
Make the following setting.  
Some TVs or monitors are equipped with component video inputs. Connecting  
to these inputs allows you to enjoy higher quality picture playback.  
Actual labels for component video inputs may vary depending on the TV  
manufacturer. (ex.Y, R-Y, B-Y or Y, CB, CR)  
On-screen display  
Select:  
Page  
54  
57  
Audio Out Select” “Analog 2ch”  
In some TVs or monitors, the color levels of the playback picture may be  
reduced slightly or the tint may change. In such a case, adjust the TV or  
monitor for optimum performance.  
Notes  
Refer to the owners manual of the connected equipment as well.  
When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment  
from the wall outlet before making any connections.  
If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the  
DVD video player away from the tuner and radio.  
The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receivers volume to a moderate  
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.  
Turn off the amplifier before you connect or disconnect the DVD video players power cord. If you leave the amplifier power  
on, the speakers may be damaged.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to Optional Equipment  
You can enjoy high quality dynamic sounds by connecting the DVD video player  
to optional audio equipment.  
For connection to your TV, see Connecting to a TV”  
Warning  
18 19  
.
When you are connecting (via the BITSTREAM/PCM  
AUDIO OUT jack) an AV decoder that does not have  
Dolby Digital, Digital Theater Systems (DTS) or MPEG2  
decoding function, be sure to set Audio Out Selectto  
PCMfrom the on-screen displays 54 57 . Otherwise,  
high volume sound may damage your hearing as well as  
the speakers.  
When playing DTS-encoded discs (DVD video discs  
and audio CDs), excessive noise may be output from  
the analog stereo jacks. To avoid possible damage to  
the audio system, you should take proper precautions  
when the 2CH AUDIO OUT jacks of the DVD video  
player are connected to an amplification system. To  
enjoy DTS Digital Surroundplayback, an external 5.1  
channel DTS Digital Surrounddecoder system must  
be connected to the BITSTREAM/PCM AUDIO OUT  
jack of the DVD video player.  
For details of output sound, see 43  
This section uses the following reference marks.  
.
: Front speaker  
: Rear speaker  
: Sub woofer  
: Center speaker  
: Signal flow  
Notes  
DO NOT connect the BITSTREAM/PCM AUDIO OUT jack  
of the DVD video player to the AC-3 RF input of a Dolby  
Digital Receiver. This input on your A/V Receiver is  
reserved for Laserdisc use only and is incompatible with  
the BITSTREAM/PCM AUDIO OUT jack of the DVD video  
player.  
Connect the BITSTREAM/PCM AUDIO OUT jack of the  
DVD video player to the OPTICALor COAXIALinput of  
a Receiver or Processor.  
Refer to the owners manual of the connected equipment  
as well.  
When you connect the DVD video player to other  
equipment, be sure to turn off the power and unplug all of  
the equipment from the wall outlet before making any  
connections.  
The output sound of the DVD video player has a wide  
dynamic range. Be sure to adjust the receivers volume to  
a moderate listening level. Otherwise, the speakers may  
be damaged by a sudden high volume sound.  
Turn off the amplifier before you connect or disconnect the  
DVD video players power cord. If you leave the amplifier  
power on, the speakers may be damaged.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an amplifier equipped with a Dolby Digital decoder  
Manufactured under license from Dolby  
Laboratories. Dolby, Pro Logicand  
Dolby Digital is the surround sound technology used in theaters showing the  
the double-D symbol are trademarks of  
Dolby Digital  
latest movies, and is now available to reproduce this realistic effect in the home.  
You can enjoy motion picture and live concert DVD video discs with this dynamic  
realistic sound by connecting the DVD video player to a 6 channel amplifier  
equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a  
Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic  
from the same DVD movies that provide full 5.1-channel Dolby Digital  
soundtracks, as well as from titles with the Dolby Surround mark.  
Dolby Laboratories. Confidential  
unpublished works. ©1992-1997 Dolby  
Laboratories. All rights reserved.  
Use DVD video discs encoded via  
the Dolby Digital recording  
system.  
Make the following setting.  
On-screen display  
Audio Out Select” “Bitstream”  
Recording system  
Select:  
Page  
54  
Amplifier equipped with a  
Dolby Digital decoder  
Y
P
B
P
R
S
VIDEO COAXIAL OPTICAL  
ITSTREAM/P
AUDIO OUT  
VIDEO OUT  
AUDIO OUT  
2CH  
5.1CH SURROUND  
FRONT SURROUND CENTER  
L
57  
R
SUBWOOFER  
To OPTICAL  
type digital  
audio input  
To COAXIAL  
type digital  
audio input  
42  
D
Connect either.  
75 coaxial cable  
Optical digital cable  
To  
BITSTREAM  
/PCM  
AUDIO OUT  
Connecting to an amplifier equipped with Dolby Pro Logic Surround  
Make the following setting.  
Dolby Pro Logic Surround  
You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by  
connecting an amplifier and speaker system (right and left front speakers, a  
center speaker, and one or two rear speakers).  
On-screen display  
Select:  
Page  
54  
57  
Audio Out Select” “Analog 2ch”  
With an amplifier equipped with Dolby Digital  
Connect the equipment the same way as described in Connecting to an  
amplifier equipped with a Dolby Digital decoder.Refer to that amplifiers  
owners manual and set the amplifier so you can enjoy Dolby Pro Logic  
Surround sound.  
Be sure to set Audio Out Select”  
to Analog 2chwhen you enjoy  
sounds of Dolby Pro Logic  
Surround using this connection.  
With an amplifier not equipped with Dolby Digital  
Connect the equipment as follows.  
* Connect one or two rear speakers.  
The output sound from the rear speakers  
will be monaural even if you connect two  
rear speakers.  
Amplifier equipped with  
*
Y
P
B
P
R
S
VIDEO COAXIAL OPTICAL  
BITSTREAM/PCM  
AUDIO OUT  
Dolby Pro Logic Surround  
To audio input  
VIDEO OUT  
AUDIO OUT  
2CH  
5.1CH SURROUND  
FRONT SURROUND CENTER  
L
R
SUBWOOFER  
To 2CH AUDIO OUT  
Audio cable  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to Optional Equipment (Continued)  
Connecting to an amplifier equipped with a DTS decoder  
DTSand DTS Digital Surroundare  
trademarks of Digital Theater Systems,  
Inc.  
Digital Theater Systems (DTS)  
DTS is a high quality surround technology used in theaters and now available for  
home use, on DVD video discs or audio CDs.  
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1  
channel DTS encoded sound tracks on DVD video discs or audio CDs.  
Use DVD video discs or audio  
CDs encoded via the DTS  
recording system.  
Make the following setting.  
On-screen display  
Select:  
Page  
Amplifier equipped with  
a DTS decoder  
Y
P
B
P
R
S
VIDEO COXIAL OPTICAL  
BSTREAM/PCM  
AUDIO OUT  
VIDEO OUT  
54  
57  
AUDIO OUT  
2CH  
5.1CH SURROUND  
FRONT SURROUND CENTER  
Audio Out Select” “Bitstream”  
Recording system DTS  
L
R
SUBWOOFER  
To OPTICAL  
type digital  
audio input  
To COAXIAL  
type digital  
audio input  
42  
To  
Connect either.  
75 coaxial cable  
Optical digital cable  
BITSTREAM  
/PCM  
AUDIO OUT  
Connecting to an amplifier equipped with an MPEG2 audio decoder  
MPEG2 sound  
You can enjoy motion picture and live concert DVD video discs with dynamic  
realistic sound by connecting an amplifier equipped with an MPEG2 audio  
decoder or MPEG2 audio processor.  
Use DVD video discs encoded via  
the MPEG2 recording system.  
Make the following setting.  
On-screen display  
Select:  
Page  
Amplifier equipped with an  
MPEG2 audio decoder  
54  
57  
Y
P
B
P
R
S
VIDEO COAXIAL OPTICAL  
TSTREAM/P
AUDIO OUT  
VIDEO OUT  
Audio Out Select” “Bitstream”  
Recording system MPEG  
AUDIO OUT  
2CH  
5.1CH SURROUND  
FRONT SURROUND CENTER  
L
R
SUBWOOFER  
To OPTICAL  
type digital  
audio input  
To COAXIAL  
type digital  
audio input  
42  
To  
Connect either.  
BITSTREAM  
/PCM  
AUDIO OUT  
75 coaxial cable  
Optical digital cable  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an amplifier equipped with 5.1ch audio inputs  
Use DVD video discs encoded via  
the Dolby Digital or DTS recording  
system.  
5.1ch surround sound  
The Dolby Digital and DTS decoder equipped with this DVD video player enables  
you to obtain the full benefit of 5.1 channel sound tracks when you connect the  
DVD video player to an amplifier equipped with 5.1 channel audio inputs.  
Make the following setting.  
On-screen display  
Select:  
Page  
54  
57  
Audio Out Select” “Analog 6ch”  
Amplifier equipped with  
Y
P
B
P
R
S
VIDEO COAXIAL OPTICAL  
BITSTREAM/PCM  
5.1ch audio inputs  
VIDEO OUT  
AUDIO OUT  
D
AUDIO OUT  
5.1CH SURROUND  
FRONT SURROUND CENTER  
2CH  
42  
Recording system  
DTS  
L
R
SUBWOOER  
To 5.1ch audio  
inputs  
MPEG  
To 5.1CH SURROUND  
AUDIO OUT  
2 channel sound (except DTS) is output in  
the Dolby Pro Logic format. To obtain the  
original 2 channel sound, select Analog  
2ch.”  
Audio cable  
Connecting to an amplifier equipped with a digital audio input  
2 channel digital stereo  
Make the following setting.  
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an  
amplifier equipped with a digital audio input and speaker system (right and left  
front speakers).  
On-screen display  
Select:  
Page  
54  
57  
Audio Out Select”  
PCM”  
Amplifier equipped with  
a digital audio input  
Y
P
B
P
R
S
VIDEO COAXIAL OPTICAL  
BTREAM/PCM  
AUDIO OUT  
VIDEO OUT  
AUDIO OUT  
2CH  
5.1CH SURROUND  
FRONT SURROUND CENTER  
L
R
SUBWOOFER  
To OPTICAL  
type digital  
audio input  
To COAXIAL  
type digital  
audio input  
Connect either.  
75 coaxial cable  
To  
BITSTREAM  
/PCM  
AUDIO OUT  
Optical digital cable  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
Begin your operation.  
Playing a Disc  
Locating a SpecificTitle,  
Chapter, or Track  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
CAUTION  
Keep your fingers well clear of the disc tray as it is closing.  
Neglecting to do so may cause serious personal injury.  
Playing a Disc  
This section shows you the basics on how to play a disc.  
PAUSE  
1POWER indicator  
4
STOP  
DISC SKIP  
DISC SKIP  
DOWN UP  
PAUSE  
STOP  
PLAY  
TOP MENU  
MENU  
ENTER  
SKIP  
1
2
3
4
5
RETURN  
DISC SELECT  
OPEN/CLOSE  
POWER  
DISC SELECT  
ENTER  
3
2
DVD  
VCD  
CD  
Basic playback  
Preparations  
• When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.  
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected  
to the DVD video player.  
Press POWER.  
Press PLAY.  
PLAY  
4
1
The DVD video player turns on and  
the POWER indicator on the player  
illuminates.  
Playback starts.  
POWER  
If you insert a DVD video disc that contains a top  
menu, a menu may appear. See “Locating a title  
using the top menu.” 30  
You may need to press the TOP MENU or MENU  
button to display disc menu (depending on the  
actual DVD video disc.)  
When the DVD video player is turned on for  
the first time, a message appears. Press  
ENTER, and make the proper settings before  
proceeding to step 2.  
63  
Press OPEN/CLOSE.  
2
3
The disc tray opens.  
OPEN/CLOSE  
Selecting the desired disc for playback  
Press one of the DISC SELECT 1 – 5 buttons. The DVD  
video player starts playing the first title of the selected  
disc. There is no need to press the PLAY button.  
1
2
3
4
5
Place a disc in the front disc holder.  
(DISC 1)  
DISC SELECT  
Notes  
With the  
playback  
side down.  
• If you select the desired disc using one of the DISC SELECT  
1 – 5 buttons while the DVD video player is playing back a  
title of another disc, playback starts with the first title of the  
newly selected disc.  
DISC SKIP  
DOWN UP  
PLAY  
SKIP  
1
2
3
4
5
DISC SELECT  
OPEN/CLOSE  
POWER  
DISC 2  
DISC 1  
You can also press the DISC SKIP button to jump to the disc  
in the next holder (or from holder #5 to holder #1 if the disc  
in holder #5 is currently being played back). In that case  
playback will start with the first title of the disc in the newly  
selected holder.  
• There are two different disc sizes. Place the disc in  
the correct guide on the disc tray. If the disc is out  
of the guide, it may damage the disc and cause the  
DVD video player to malfunction.  
• Do not place a disc which is unplayable in this  
DVD video player.  
Placing discs in the remaining disc holders  
DISC SKIP  
Repeatedly press the DISC SKIP  
DOWN  
UP  
button on the DVD video player to  
rotate the disc tray, and place a disc  
in each desired holder (1 – 5).  
• After inserting a disc, you can start playback of the  
disc in the front holder simply by pressing the PLAY  
button. In that case, the tray closes automatically.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To obtain a higher quality picture  
1
2
Occasionally, some picture noise not usually visible during a normal broadcast may  
appear on the TV screen while playing a DVD video disc because the high resolution  
pictures on these discs include a lot of information. While the amount of noise depends  
on the TV you use with this DVD video player, you should generally reduce the  
sharpness adjustment on your TV when viewing DVD video discs.  
TOP MENU  
MENU  
Jog control  
Cursor control/  
ENTER  
PAUSE/  
STEP  
DVD VCD  
CD  
About  
DVD VCD  
CD  
The  
icons on the heading bar show the playable discs for the  
PLAY  
STOP  
function described under that heading.  
DVD  
DISC SKIP  
:You can use this function with DVD video discs.  
:You can use this function with VIDEO CDs.  
:You can use this function with audio CDs.  
VCD  
DISC SELECT  
CD  
To pause playback (still mode)  
Press PAUSE/STEP during playback.  
PAUSE/STEP  
About the screen saver  
If you pause a picture of a DVD video disc and leave it  
still for a long while, the screen saver of the DVD video  
player automatically appears (when Screen Saveris  
To resume normal playback, press  
the PLAY button.  
set to On”  
). To turn off the screen saver, press the  
60  
PLAY button.  
Alternatively press the jog control during normal  
playback.  
Automatic Power Off function  
If the DVD video player is stopped, or the screen saver  
is engaged for approximately 20 minutes, the DVD  
video player will automatically turn itself off.  
To resume normal playback, press  
the jog control again.  
HDCD (High Definition Compatible Digital®)  
Sound is muted during still mode.  
HDCD® (High Definition Compatible Digital®) is a  
recording system that has improved audio CD sound in  
dynamic range, sound field reproducibility and vocal  
acoustics.  
To stop playback  
Press STOP.  
STOP  
This DVD video player is equipped with an HDCD  
decoder. The HDCD indicator illuminates when playing  
an HDCD-encoded audio CD.  
® , HDCD®, High Definition Compatible Digital® and  
Pacific Microsonicsare either registered trademarks or  
trademarks of Pacific Microsonics, Inc. in the United States  
and/or other countries. HDCD system manufactured under  
license from Pacific Microsonics, Inc. This product is  
covered by one or more of the following patents: United  
States: 5,479,168, 5,638,074, 5,640,161, 5,808,574,  
5,838,274, 5,854,600, 5,872,531 and 5,864,311. Australia  
669114. Other patents pending.  
Notes  
Do not press against the tray when it is opening. This can cause damage to the players transport  
and disc holder.  
DISC SKIP  
DOWN UP  
P
AUSE  
STOP  
PLAY  
TOP MENU  
MENU  
ENTER  
SKIP  
1
2
3
4
5
RETURN  
DISC SELECT  
OPEN/CLOSE  
POWER  
For your safety, if the disc holder is restrained during opening or closing, the tray operation will  
stop automatically. Do not push on the disc tray to close it. Always use the OPEN/CLOSE button.  
Do not move the DVD video player when discs are loaded in the player. Damage may occur to the  
discs as well as the players transport and disc holder.  
In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen  
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the  
STOP button on your remote control once the movie is completed.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
Playing a Disc (continued)  
You can play discs at various speeds, and resume playback from the location  
where you stopped playback.  
Jog control  
SLOW  
PLAY  
STOP  
PAUSE/STEP  
DVD  
VCD  
CD  
Playing in fast reverse or fast forward directions  
To resume normal playback  
Press PLAY or press the jog control.  
During normal playback, move the jog  
control toward  
or  
.
PLAY  
: Fast reverse playback  
: Fast forward playback  
Each time you move the jog control  
up or down, the playback speed  
changes.  
Notes  
The DVD video player mutes sound and omits subtitles  
during reverse and forward scan of DVD video discs.  
However, the DVD video player plays sound during fast  
forward or fast reverse play of audio CDs.  
The playback speed may differ depending on the disc.  
DVD  
VCD  
Playing frame by frame  
To resume normal playback  
Press PLAY.  
Press PAUSE/STEP during still playback.  
PAUSE/STEP  
Each time you press the PAUSE/  
STEP button, the picture advances  
one frame.  
PLAY  
Note  
The sound is muted during frame by frame playback.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
VCD  
Playing in slow-motion  
To resume normal playback  
Press PLAY.  
Press SLOW during playback.  
Each time you press the SLOW  
SLOW  
PLAY  
button, the slow-motion speed  
changes.  
SLOW  
If you press the SLOW  
button  
Notes  
during playback, you can view the  
picture in reverse slow-motion. (Only  
when using a DVD video disc.)  
The sound is muted during slow-motion playback.  
The playback speed may differ depending on the disc.  
Each time you press the SLOW  
button, the slow-motion speed  
changes.  
DVD  
VCD  
CD  
Resuming playback from the same location  
2 Press PLAY.  
Press STOP at the location where you  
want to interrupt playback.  
DVD  
PLAY  
Playback starts from the  
1
2
beginning of the current title.  
STOP  
The DVD video player memorizes  
the location where playback is  
stopped.  
VCD  
CD  
Playback starts from the  
beginning of the disc.  
If you want to return to the beginning of a DVD video  
disc, open and close the disc tray once with the  
OPEN/CLOSE button before pressing the PLAY  
button.  
Press PLAY.  
PLAY  
The DVD video player resumes  
playback from the location where  
you stopped playback.  
Notes  
The DVD video players memory is also cleared when:  
you unplug the DVD video player from the wall outlet after  
you stop playback.  
To start playback from the beginning regardless  
of the location where you stopped playback  
1 Press STOP twice.  
you change the parental lock setting  
or select a disc  
61  
menu language  
.
59  
you open the disc tray.  
you switch the discs by pressing the DISC SELECT 1 5  
button.  
STOP  
The DVD video players memory is  
cleared.  
There may be a difference in the location where playback  
resumes depending on the disc.  
Settings you changed using the on-screen displays while the  
DVD video player keeps a location in the memory may  
function only after the memory is cleared.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
Locating a Specific Title, Chapter, or Track  
Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs  
are divided into tracks. You can quickly locate any specific title, chapter, or track.  
DVD video disc  
Title 1  
Title 2  
VIDEO CD/Audio CD  
Chapter 1 Chapter 2  
Chapter 1 Chapter 2 Chapter 3  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
DVD  
Locating a title using the top menu  
Press TOP MENU.  
Press ENTER.  
1
3
The top menu appears on the TV  
screen.  
Playback starts from chapter 1 of the  
selected title.  
ENTER  
TITLE 1  
TITLE 2  
e.g.  
Notes  
The instructions above describe basic procedures which  
may vary depending on the contents of the DVD video disc.  
If different instructions appear on the TV screen, follow those  
instructions.  
TITLE 3  
TITLE 4  
If you display the top menu during playback and press the  
TOP MENU button again without selecting any title, the DVD  
video player may resume playback from the point where you  
first pressed the TOP MENU button (depending on the  
actual DVD video disc.)  
This method of locating a title is available only on a disc that  
contains a top menu.  
Instruction notes of discs may refer to the button that  
displays the top menu as TITLE button.  
Select the title you want moving the  
cursor control.  
2
If the titles in the top menu are  
assigned a number, you can directly  
locate a specific title by pressing its  
ENTER  
designated number with the number  
buttons.  
DVD  
Locating a title by entering the title number  
Notes  
Press T.  
Pressing the CLEAR button resets the title and chapter  
numbers. To clear the Titleand Chapterdisplay, press  
the T button several times.  
This method of locating a title is available only on a disc that  
contains title numbers.  
SEARCH  
1
Make sure that the space next to  
Titleis highlighted.  
(You can shift the highlight moving  
T
the cursor control (  
/
).)  
:
Title  
hapter  
1
:
C
1
Press the corresponding number  
buttons for the title you want.  
2
3
e.g. To select title 2  
To select title 12  
2
1
2
Press PLAY.  
PLAY  
Playback starts from chapter 1 of the  
selected title.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOP MENU  
Cursor control/  
ENTER  
SKIP  
PLAY  
CLEAR  
T
Number buttons  
DVD  
VCD  
CD  
Locating a specific chapter or track directly  
Press T.  
Press PLAY.  
PLAY  
1Skip steps 1 and 2 if you are using a VIDEO CD/  
4
Playback starts from the selected  
chapter or track.  
audio CD.  
SEARCH  
:
Title  
hapter  
1
T
:
C
1
To select a title and chapter number at the same  
time  
Perform step 1, and enter a title number you want in the  
space next to Titleusing the number buttons, then  
perform steps 2 to 4.  
Move the cursor control ( ) to highlight  
the space next to Chapter.”  
2
:
Title  
C
1
:
hapter  
1
ENTER  
Note  
Pressing the CLEAR button resets the title and chapter  
numbers. To clear the Titleand Chapterdisplay, press the  
T button several times.  
Press the corresponding number  
3buttons for the chapter or track you  
want.  
You can use the +10 button to select numbers  
from 10 through 99.  
e.g. To select chapter or track 25  
2
5
+10  
+10  
5
or  
DVD  
VCD  
CD  
Locating a specific chapter or track  
Notes  
Press SKIP  
or  
repeatedly to display  
Some titles may not display chapter numbers.  
62  
When you set Title Stopto Off”  
chapters in another title. If you go back to the preceding title  
by pressing the SKIP button, the DVD video player  
, you can access  
the chapter or track number you want.  
Playback starts from the selected chapter or track.  
SKIP  
To locate succeeding chapters or tracks  
locates the first chapter of the title. When Title Stopis set  
to On,you can access chapters only within the current title.  
If you press and hold the SKIP  
or  
button on the front  
SKIP  
Playback starts from the beginning of the  
current chapter or track.  
When you press twice, playback starts  
from the beginning of the preceding  
chapter or track.  
panel during playback, the DVD video player performs fast  
reverse or fast forward playback. You can vary the speed by  
pressing the button further.  
To locate chapters or tracks during fast reverse or fast  
forward playback, first press the PLAY button to resume  
normal playback, then use the SKIP  
or  
button.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Customizing the performance of your DVD video player.  
Accessing a Specific Location  
Directly  
Playing Repeatedly  
Playing in a Favorite Order  
Playing in Random Order  
Zooming a Picture  
Selecting DNR Picture  
Enhancement  
Selecting 3-D (N-2-2) Sound  
Enhancement  
Selecting the Camera Angle  
Selecting Subtitles  
Selecting a Language  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Accessing a Specific Location Directly  
You can access a specific location by entering its corresponding time (hours,  
minutes, seconds).  
3
1
2
DVD  
VCD  
CD  
Entering the time of the desired location  
Notes  
Press T twice.  
• Some discs may not respond to this process.  
• Some scenes may not be located precisely as you  
specified.  
• This method for accessing specific locations is available  
only within the current title of the DVD video disc or within  
the current track of the VIDEO CD/audio CD.  
1
SEARCH  
You may have to press further  
T
depending on the disc. Press the  
button repeatedly until the following  
display appears.  
:
Time -:- - - -  
Press the number buttons to enter the  
time.  
2
3
e.g.  
1
2
5
3
0
:
:
Time 1 25 30  
Press PLAY.  
Playback starts from the desired  
location.  
PLAY  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Repeatedly  
You can play a specific title, chapter, track, or segment repeatedly.  
CLEAR  
PLAY  
REPEAT  
A-B RPT  
DVD  
VCD  
CD  
Repeating a title, chapter, or track  
Press PLAY.  
Press REPEAT.  
1
2
PLAY  
The DVD video player starts repeat  
playback.  
Press the PLAY button within about  
5 seconds after you press the  
REPEAT button.  
REPEAT  
Each time you press the REPEAT  
button, the repeat mode changes as  
follows.  
Chapter Repeat  
To resume normal playback  
Press CLEAR.  
DVD  
Chapter Repeat Repeats the current  
chapter.  
CLEAR  
DVD  
Title Repeat  
Repeats the current  
title.  
Repeats the current  
track.  
VCD  
CD  
Track Repeat  
Notes  
DVD  
VCD  
CD  
Some discs may not permit repeat operation.  
When using a DVD video disc, All Repeatmay be canceled  
when the DVD video player switches the discs.  
Disc Repeat  
All Repeat  
Repeat Off  
Repeats the current  
disc.  
DVD  
VCD  
CD  
Repeats all the discs.  
Resumes normal  
playback.  
DVD  
VCD  
CD  
Repeating a specific segment  
To resume normal playback  
Press CLEAR.  
Press A-B RPT at the beginning of the  
segment (point A) you want to play  
repeatedly.  
1
2
CLEAR  
A-B RPT  
A–  
Notes  
Some discs may not permit A-B repeat operation.  
You cannot set the A-B repeat function for a segment that  
includes multiple camera angles 40  
You can specify a segment only within the current title or  
track.  
There may be a slight difference between point A and the  
location where playback actually resumes depending on the  
disc.  
Press A-B RPT again at the end of the  
segment (point B).  
.
The DVD video player automatically  
A-B RPT  
returns to point A and starts repeat  
playback of the selected segment  
(A-B).  
AB  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Playing in a Favorite Order  
You can combine your favorite titles, chapters, or tracks and play them in the  
order you determine. You can program up to 30 selections into the memory.  
(Memory playback)  
Cursor contro/  
ENTER  
CLEAR  
Title:  
2
Title:  
2
Title:  
1
3
Chapter: 25  
Chapter: 12  
Chapter:  
1
2
1
DVD  
VCD  
CD  
Setting titles, chapters, or tracks in a favorite order  
To change the programmed selections  
1 While the Memory Listdisplay appears on the TV  
Insert a disc and press MEMORY during  
stop.  
1
2
screen, move the cursor control (  
the item you want to change.  
/
) to highlight  
The following display appears.  
MEMORY  
2 Change the selection following the instructions in  
step 2.  
Memory List  
:
:
:
:
:
:
:
:
:
CT  
:
CT  
:
CT  
:
CT  
:
CT  
:
CT  
:
CT  
-
-
-
-
-
-
-
1
2
3
4
5
6
7
D
D
D
D
D
D
D
T --  
--  
--  
--  
--  
--  
--  
--  
:
T --  
To cancel the programmed selections  
1 While the Memory Listdisplay appears on the TV  
screen, move the cursor control (  
the item you want to cancel.  
2 Press CLEAR.  
:
T --  
:
T --  
:
D: Disc number  
T: Title number  
CT: Chapter number  
or track number  
T --  
:
/
) to highlight  
T --  
:
T --  
To resume normal playback from memory  
playback  
Press CLEAR.  
Select the items in the order you want  
by pressing the number buttons, then  
ENTER for each item.  
The memory playback indicator  
CLEAR  
disappears.  
Each time you move the cursor control (  
/
), the  
spaces of D, Tand CTare highlighted in turn.  
Highlight where you want to enter, then press the  
corresponding number buttons.  
To program during playback  
If you press the MEMORY button during playback, a  
programming display appears.  
To select tracks from a VIDEO CD/audio CD in  
order, press the number buttons for the track,  
then press the ENTER button for each selection  
you want.  
Follow steps 2 and 3.  
Notes  
Some discs may not permit memory playback operation.  
If you press the REPEAT button during memory playback,  
the DVD video player repeats the current memory playback.  
If you press the MEMORY or RETURN button while the  
Memory Listdisplay appears on the TV screen, the  
Memory Listdisplay disappears.  
To select another title, chapter or track in the  
same disc, you do not need to select the disc  
number.  
To select another chapter in the same title, you do  
not need to select the title number.  
The programmed selections will be cleared when you turn off  
the DVD video player.  
When using a DVD video disc, the memory playback may be  
canceled when the DVD video player switches discs.  
Press PLAY while the “Memory List”  
display appears on the TV screen.  
3
PLAY  
The DVD video player starts  
memory playback.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing in Random Order  
You can play titles, chapters within a title, or tracks in random order.  
(Random playback)  
CLEAR  
2
Title:  
1
Chapter:  
3
Title:  
2
Title:  
3
Chapter:  
2
Chapter:  
1
1
DVD  
VCD  
CD  
Playing titles, chapters or tracks in random order  
To resume normal playback  
Press CLEAR.  
Press RANDOM.  
1
RANDOM  
Each time you press the RANDOM  
CLEAR  
button, the random playback mode  
changes as follows.  
Chapter Random  
Notes  
Some discs may not permit random playback operation.  
You cannot use the random playback function in conjunction  
with the memory playback function.  
DVD  
DVD  
Chapter Random Plays chapters within  
the current title in  
random order.  
Title Random  
Plays titles within the  
current disc in random  
order.  
VCD  
CD  
Track Random  
Plays tracks within the  
current disc in random  
order.  
DVD  
VCD  
CD  
All Random  
Plays titles or tracks  
within all discs in  
random order.  
Random Off  
Resumes normal  
playback.  
If you press the RANDOM button  
during playback, the DVD video  
player automatically starts random  
playback after finishing the current  
title, chapter or track.  
Press PLAY.  
2
PLAY  
The DVD video player starts random  
playback.  
Press the PLAY button within about  
5 seconds after you press the  
RANDOM button.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Zooming a Picture  
You can magnify areas within a picture.  
Cursor control  
CLEAR  
+
ZOOM/ /  
DVD  
Zooming a picture  
To resume normal playback  
Press ZOOM repeatedly so that Zoom Offappears.  
Press ZOOM during normal, slow or  
still playback.  
1
ZOOM  
Zoom playback starts.  
ZOOM  
Notes  
Some discs may not respond to zoom feature.  
During some scenes, the buttons may not work as  
described.  
Zooming does not work on subtitles or menus included on  
DVD video discs.  
During zoom playback, the cursor control cannot work on  
menus included on DVD video discs. If you want to view the  
menus, cancel the zoom playback.  
The magnification level varies depending on the picture size  
you select. 56  
Select the zoom point and  
magnification level.  
2
To increase the magnification level.  
To reduce the magnification level.  
As you move the cursor control, the  
zoom point shifts.  
ENTER  
Pressing the CLEAR button restores  
the zoom point to the center of the  
picture.  
CLEAR  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting DNR Picture Enhancement  
You can view a picture with less video noise.  
DNR  
DVD  
VCD  
Selecting DNR picture enhancement  
Notes  
Press DNR during playback.  
Actual picture enhancement may vary depending on the  
quality of the disc.  
The current setting is displayed.  
DNR  
While the DNR2 level can provide additional improvement in  
the reduction of noise in the video signal, it may produce  
undesireble picture artifacts on some discs. Should this  
occur, select a more appropriate DNR level (DNR1 or off).  
Depending on the disc, some kinds of picture details may be  
lost by the picture enhancement.  
Each time you press the DNR  
button, the setting changes as  
follows.  
Off  
DN  
R
O
ff  
To reduce minute video  
noise  
DNR1  
DNR2  
To increase the DNR1  
effect  
Edge Enhance  
To enhance picture edges  
DNR: Digital Noise Reduction  
Selecting 3-D (N-2-2) Sound Enhancement  
You can enjoy expansive virtual surround sound effects from just two speakers.  
3D  
DVD  
VCD  
CD  
Selecting 3-D (N-2-2) sound enhancement  
Notes  
Press 3D during playback.  
You may sense a difference in volume between normal and  
3-D (N-2-2) enhanced sound.  
3-D (N-2-2) sound enhancement may not function (or may  
not be realized) depending on the sound output setting or  
3D  
The current setting is displayed.  
Each time you press the 3D button,  
the setting changes as follows.  
disc recording system  
.
43  
If 3-D (N-2-2) sound enhancement is on, Dolby Pro Logic  
Surround may not function on output sounds at all, or may  
function differently than usual.  
(
(
):  
3
3
D
D
N
N
2
2
2
2
O
O
ff  
Off  
):  
n
On  
Spatializer® 3-Dimensional Sound Processing provided by Desper  
Products. Inc.  
Certain audio features of this product manufactured under a license  
from Desper Products, Inc., Spatializer® and the circle-in-square  
device are trademarks owned by Desper Products, Inc.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Selecting the Camera Angle  
1, 2  
2
If the scene was recorded from multiple angles, you can easily change  
the camera angle of the scene you are watching.  
CLEAR  
DVD  
Changing the camera angle  
To turn off the angle number display  
Press CLEAR.  
Press ANGLE while playing a scene  
recorded with multiple angles.  
1
2
CLEAR  
ANGLE  
While playing a scene recorded with  
multiple angles, the angle icon (  
appears in the DVD display and on  
the TV screen.  
Press the ANGLE button while the  
angle icon is displayed.  
)
To disable the angle icon display on the TV  
From the on-screen displays, set On-Screen Displays”  
60  
to Off.”  
Monitor the DVD display when you want to change the  
camera angle.  
e.g.  
Current angle number  
Angle icon  
Notes  
:
Angle  
1
/
5
You can change the camera angle during still playback. The  
camera angle changes to the new setting when you resume  
normal playback.  
If you pause a picture immediately after changing a camera  
angle, the resumed playback picture may not display the  
new camera angle.  
Press ANGLE or move the cursor  
control ( ) while the angle number is  
displayed on the TV screen.  
ANGLE  
Each time you press the ANGLE  
button or move the cursor control  
( ), the camera angle changes.  
e.g.  
:
:
:
Angle  
Angle  
Angle  
1
2
3
/
/
/
5
5
5
ENTER  
: Cycles backwards  
You can change the camera angle directly by  
pressing the number buttons corresponding to its  
angle number instead of moving the cursor control  
(
/
).  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting Subtitles  
SUBTITLE  
You can display subtitles on the TV screen and select a subtitle language  
from those included on the DVD video disc.  
Cursor control  
CLEAR  
Good evening!  
Bonsoir!  
¡Buenas tardes!  
DVD  
Selecting a subtitle language  
To turn subtitles on or off  
1 Press SUBTITLE during playback.  
Press SUBTITLE during playback.  
1
The current subtitle setting is  
SUBTITLE  
SUBTITLE  
displayed for about 3 seconds.  
:
Subtitle  
ENG  
On  
2 Move the cursor control (  
/
) while the subtitle  
setting is displayed on the TV screen, to select On”  
or Off.”  
Language  
The abbreviation of the language appears instead  
of the language name. Refer to the list of  
languages and their abbreviations. 64  
Displayed for about 3 seconds.  
:
Subtitle  
ENG  
On  
ENTER  
Press SUBTITLE or move the cursor  
control ( ) while the subtitle setting is  
displayed on the TV screen.  
2
Each time you press the SUBTITLE  
SUBTITLE  
button or move the cursor control  
( ), the subtitle languages included  
on the DVD video disc change.  
Good evening!  
Subtitles  
:
Subtitle  
ENG  
O
ff  
e.g.  
Subtitles are  
not displayed.  
ENTER  
:
Subtitle  
ENG  
O
O
O
n
n
n
:
Subtitle FRE  
:
Subtitle SPA  
Notes  
Some DVD video discs are set to display subtitles  
automatically, and you cannot turn them off even if you set  
the subtitle function to off.  
During some scenes, the subtitles may not appear  
immediately after you select On.”  
:
Subtitle – –  
O
ff  
Some DVD video discs will allow you to make subtitle  
selections and turn subtitles on or off only via the disc menu.  
: Cycles backwards  
To turn off the subtitle setting  
display, press the CLEAR button.  
Notes  
59  
When you turn on the DVD video player or replace a disc, the player returns to the initial default setting  
.
When you select a subtitle language which is not included on the disc, the DVD video player plays a prior language  
programmed on the disc.  
During some scenes, the subtitles may not appear immediately after you change the subtitle language by moving the cursor  
control (  
/
).  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Selecting a Language  
1, 2  
2
You can select a preferred language and sound recording system from those  
included on the DVD video disc.  
CLEAR  
Good morning!  
¡Buenos días!  
Bonjour!  
DVD  
Selecting a playback audio setting  
Selecting sound channels of VIDEO CDs  
You can switch left and right channels by pressing the  
AUDIO button repeatedly during playback.  
Press AUDIO during playback.  
AUDIO  
1
The current audio setting is  
displayed for about 3 seconds.  
AUDIO  
Language  
Recording system  
Audio channel  
:
O
Audio  
Audio  
E
NG  
P
CM  
2CH  
:
ut Select Bitstream  
54 57  
Output sound format  
Notes  
When you turn on the DVD video player or replace a disc,  
59  
If you select a sound track which is not included on the disc,  
the DVD video player plays a prior sound track programmed  
on the disc.  
player returns to the initial default setting  
.
The abbreviation of the language appears instead  
of the language name. Refer to the list of  
languages and their abbreviations. 64  
Some discs allow you to change audio selections only via  
the disc menu. If this is the case, press the MENU button  
and choose the appropriate language from the selections on  
the disc menu.  
Press AUDIO or move the cursor  
control ( ) while the audio setting is  
displayed on the TV screen.  
2
AUDIO  
Each time you press the AUDIO  
button or move the cursor control  
( ), the audio settings included on  
the DVD video disc change.  
e.g.  
:
Audio  
ENG  
2
CH  
PCM  
ENTER  
:
Audio FRE  
D
2
CH  
:
Audio SPA  
PCM  
2CH  
: Cycles backwards  
If you move the cursor control  
), you can select output sound  
format. 57  
(
/
To turn off the audio setting display, press the  
CLEAR button.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Output sound conversion table (sampling frequency/quantization bit)  
Audio selection from the menu  
Analog 6ch  
and output jacks on the rear panel  
Analog 2ch  
54 57  
Discs  
Sound recording system  
Bitstream  
PCM  
5.1CH SURROUND  
AUDIO OUT jacks  
2CH AUDIO  
OUT jacks  
2CH AUDIO  
OUT jacks  
2CH AUDIO  
OUT jacks  
BITSTREAM/PCM  
BITSTREAM/PCM  
jack  
BITSTREAM/PCM  
BITSTREAM/PCM  
jack  
jack  
jack  
Dolby Digital  
48 kHz/16 bit  
48 kHz/20 bit  
Bitstream  
Bitstream  
48 kHz/16 bit  
48 kHz/16 bit  
48 kHz/16 bit  
48 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit  
48 kHz/20 bit  
48 kHz/20 bit  
48 kHz/16 bit  
48 kHz/20 bit  
48 kHz/24 bit  
96 kHz/16 bit  
96 kHz/20 bit  
96 kHz/24 bit  
48 kHz/20 bit  
48 kHz/16 bit  
48 kHz/16 bit  
48 kHz/20 bit  
48 kHz/24 bit  
48 kHz/16 bit  
48 kHz/20 bit  
48 kHz/24 bit  
48 kHz/20 bit  
48 kHz/16 bit  
44.1 kHz/16 bit  
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit  
48 kHz/16 bit 48 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit  
48 kHz/16 bit 48 kHz/24 bit 48 kHz/16 bit 48 kHz/20 bit  
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit  
48 kHz/16 bit 48 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit  
48 kHz/16 bit 48 kHz/24 bit 48 kHz/16 bit 48 kHz/20 bit  
48 kHz/16 bit  
48 kHz/16 bit  
48 kHz/16 bit  
48 kHz/16 bit  
48 kHz/16 bit  
48 kHz/16 bit  
48 kHz/16 bit  
48 kHz/16 bit  
44.1 kHz/16 bit  
DVD  
video discs  
Linear  
PCM  
48 kHz/24 bit  
96 kHz/16 bit  
96 kHz/20 bit  
96 kHz/24 bit  
DTS  
MPEG2  
MPEG1  
Bitstream  
Bitstream  
44.1 kHz/16 bit 44.1 kHz/16 bit  
48 kHz/20 bit 48 kHz/16 bit  
Bitstream  
48 kHz/16 bit  
48 kHz/16 bit  
44.1 kHz/16 bit  
44.1 kHz/16 bit 44.1 kHz/16 bit  
VIDEO CDs  
Audio CDs  
Linear PCM 44.1 kHz/16 bit 44.1 kHz/16 bit  
44.1 kHz/16 bit  
44.1 kHz/16 bit  
44.1 kHz/16 bit 44.1 kHz/16 bit  
44.1 kHz/16 bit  
44.1 kHz/16 bit 44.1 kHz/16 bit  
HDCD  
DTS  
44.1 kHz/16 bit 44.1 kHz/20 bit  
44.1 kHz/16 bit  
44.1 kHz/20 bit  
44.1 kHz/20 bit  
44.1 kHz/16 bit 44.1 kHz/16 bit  
44.1 kHz/20 bit 44.1 kHz/16 bit  
44.1 kHz/20 bit 44.1 kHz/16 bit 44.1 kHz/20 bit  
44.1 kHz/16 bit  
Bitstream  
: 3-D (N-2-2) sound enhancement can function.  
HDCD sound via the 2CH AUDIO OUT jacks and the 5.1CH SURROUND AUDIO OUT jacks is output in a normal audio CD format when 3-D  
(N-2-2) sound enhancement is on or when Analog 6chis selected.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick control  
Simple use of a single button and the cursor control  
enables you to direct your playback, without manipulating  
many actual buttons.  
Using the Graphic Remote  
Control - V-REMOTE -  
Selecting the Playback Function  
- QUICK -  
Accessing Features  
- NAVI -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick control  
Using the Graphic Remote Control  
- V-REMOTE -  
1
2
Pressing one button can display a graphics based on-screen remote control that  
allows you to control playback as if you were doing it from the actual remote  
control.  
DVD  
VCD  
CD  
Using the graphic remote control  
During playback, press V-REMOTE.  
B: Move the cursor control ( / ) to  
1
The graphic remote control (Virtual  
Remote) appears.  
M
DVD  
select “Audio,Subtitle,or  
“Angle,and press ENTER.  
:
:
:
:
0 12 34  
1
:
Title  
hapt.  
:
C
0 01 23  
2
Audio  
Subtitle  
Angle  
ENTER  
Navi  
ENTER  
Speed control  
Proceed to 2-A.  
Audio: Move the cursor control (  
/
) to select  
Stream selection  
Proceed to 2-B.  
a desired audio language, and press  
ENTER.  
For details, see page 42  
Selecting the output sound format is not  
possible here.  
.
Proceed to A or B.  
2A: Move the cursor control to select  
DVD  
VCD  
CD  
the speed control, and press  
ENTER.  
Subtitle: Move the cursor control (  
/
) to select  
a desired subtitle language, and press  
ENTER.  
For details, see page  
41  
.
ENTER  
Angle: Move the cursor control (  
/
) to select  
a desired camera angle, and press  
ENTER.  
For details, see page 40  
.
ENTER  
To turn off the Virtual Remote  
Press V-REMOTE.  
27  
28  
/ Frame by frame  
: Pause  
: Normal playback 26  
: Slow 29  
M
31  
: Forward skip  
: Fast forward 28  
: Reverse slow 29  
31  
: Reverse skip  
Note  
Some discs may not permit this operation.  
: Fast reverse 28  
Navi : Accesses the Navi menu  
48  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Selecting the Playback Function - QUICK -  
Pressing one button can display a list of playback functions which are relevant to  
your current playback mode.You can check and modify them from the list.  
2, 3, 4  
DVD  
VCD  
CD  
Selecting the playback function  
During playback, press QUICK.  
Press ENTER.  
1
4
The following on-screen display  
appears.  
(The actual display will vary  
depending on the playback status.)  
The on-screen display disappears  
and playback will resume according  
to your selection.  
QUICK  
ENTER  
e.g.  
Quick  
Memory  
Memory List  
Repeat  
Quick menu  
For details, see the respective pages.  
Random  
Bit Rate  
Text  
Disc Select  
Exit  
36  
To program memory playback.  
Memory List : To list memory settings.  
Memory :  
36  
35  
37  
Repeat :  
Random :  
Bitrate :  
To select the repeat playback mode.  
To select the random playback mode.  
To activate/disable the bitrate display.  
48  
To activate/disable the Text display.  
Text display:  
Move the cursor control ( / ) to select  
a desired item, and press ENTER.  
2
3
48  
Text :  
Displays DVD-Text data or CD-Text data  
if included on the disc.  
(Some content on the disc may not be  
displayed properly depending on the  
disc.)  
e.g. To change the repeat mode:  
ENTER  
Quick  
Memory  
Memory List  
Repeat  
A-B (Set A)  
Chapter  
Title  
Disc Select : To change disc selection for playback.  
Exit : To quit the on-screen display.  
Random  
Bit Rate  
Text  
Disc  
All  
ENTER  
Disc Select  
Exit  
Note  
Pressing the QUICK button again also exits the on-screen  
display.  
Move the cursor control ( / ) to  
change the setting.  
e.g. To select the chapter repeat  
mode:  
ENTER  
Quick  
Memory  
Memory List  
Repeat  
A-B (Set A)  
Chapter  
Title  
Random  
Bit Rate  
Text  
Disc  
All  
Disc Select  
Exit  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick control  
1
Accessing Features - NAVI -  
The NAVI menu provides an icon based display from which you can easily  
access key playback function.  
2, 3  
DVD  
VCD  
CD  
NAVI menu items  
Press NAVI.  
Press ENTER.  
1
3
The NAVI menu appears.  
Selection details appears.  
NAVI  
Feature icon  
ENTER  
V-Remote  
Angle Viewer  
Capture  
Navi  
Title:  
Chapt.:  
Audio  
Subtitle  
Angle  
Zoom  
Refer to the list on the next page and  
follow the instructions detailed on  
subsequent pages.  
DNR  
4
Bit Rate:  
Preview  
Strobe Viewer  
3D  
Each time you press the NAVI button, the display  
changes.  
Notes  
• The NAVI menu will disappear by pressing the NAVI button  
several times.  
• The number of feature icons on the display will vary  
depending on the disc.  
Title/Chapt.: Elapsed time and remainig time of  
the current title/chapter.  
Audio:  
Current audio setting  
Subtitle:  
Angle:  
Current subtitle setting  
Current angle setting  
Bit Rate:  
Data transfer rate (Mbit/s)  
Amount of picture, sound and subtitle  
data in the DVD video disc  
transferred per second.  
The larger the value, the more data  
processed, but this does not  
necessarily insure better picture  
quality.  
Status display (playback mode, current DNR  
setting, current zoom status, etc.)  
Move the cursor control to select a  
desired feature icon.  
2
For details on each feature, refer to  
the list on the next page.  
ENTER  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Navi menu selections  
You can control key playback functions using the graphics based  
on-screen remote control.  
V-Remote  
46  
50  
38  
Navi  
Angle Viewer  
You can display all camera angles simultaneously and select your  
preferred one from them.  
Zoom  
You can magnify areas within a picture.  
Z
M
You can divide a desired scene into stop action frames for careful  
analysis.  
50  
51  
Strobe Viewer  
3D  
You can enjoy expansive virtual surround sound effects from just  
two speakers.  
You can display thumbnail views of the first scenes of titles or  
chapters and select a preferred one.  
51  
52  
52  
Preview  
You can view a picture with less video noise.  
DNR  
Capture  
You can sample a scene from a playback picture and transform it  
into a background picture.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick control  
Accessing Features - NAVI - (continued)  
NAVI menu items  
You can display all camera  
You can divide a desired  
scene into stop action  
frames for careful analysis.  
Angle Viewer  
angles simultaneously and  
select your preferred one  
from them.  
Strobe Viewer  
After selecting this icon and pressing ENTER, the  
following on-screen display appears:  
After selecting this icon and pressing ENTER, the  
following on-screen display appears:  
e.g.  
e.g.  
1
2
5
8
3
4
6
7
9
Slow  
Normal  
>>  
Fast  
Angle Viewer  
Navi  
Exit  
Strobe Viewer  
Navi  
Exit  
When the scene contains 9 camera angles:  
1 Move the cursor control to select.  
1 Move the cursor control to select.  
ENTER  
ENTER  
1-9 : To select the camera angle.  
Navi: To return to the NAVI menu.  
Exit : To quit the on-screen display.  
Slow: Still pictures at shorter intervals.  
Normal: Still pictures at normal intervals.  
Fast: Still pictures at longer intervals.  
>>:  
To view the next series of 6 pictures.  
2 Press ENTER.  
Navi: To return to the NAVI menu.  
Exit : To quit the on-screen display.  
ENTER  
2 Press ENTER.  
ENTER  
Note  
Some discs or scenes may not permit this operation.  
Note  
Some discs or scenes may not permit this operation.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You can enjoy expansive  
virtual surround effects  
from just two speakers.  
You can display thumbnail  
views of the first scenes of  
titles or chapters and  
select a preferred one.  
Preview  
3D  
After selecting this icon and pressing ENTER, the  
following on-screen display appears:  
After selecting this icon and pressing ENTER, the  
following on-screen display appears:  
e.g.  
e.g.  
1
4
2
3
3D (N-2-2)  
On  
Off  
5
6
Title  
Preview  
Chapter  
>>  
Interval  
Navi Exit  
<<  
1 Move the cursor control to select.  
1 Move the cursor control to select.  
ENTER  
ENTER  
On: This function works.  
Off: This function does not work.  
1 - 6:  
Title:  
To locate the scene.  
To display the first scenes of titles (1 to 6).  
Chapter:To display the first scenes of chapters  
(1 to 6).  
2 Press ENTER.  
Interval: To display scenes at intervals of about 10  
minutes apart.  
ENTER  
<< :  
To go to the previous page.  
To go to the next page.  
>> :  
Navi:  
Exit :  
To return to the NAVI menu.  
To quit the on-screen display.  
Note  
For details and notes on 3-D (N-2-2), see page  
.
39  
2 Press ENTER.  
ENTER  
Notes  
• Some discs or scenes may not permit this operation.  
• Some items may not be selected depending on the  
disc or scene.  
• Some of the first scenes may not picked up depending  
on the disc.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick control  
Accessing Features - NAVI - (continued)  
NAVI menu items  
You can view a picture  
with less video noise.  
You can sample a scene  
from a playback picture  
and transform it into a  
background picture.  
Capture  
DNR  
After selecting this icon and pressing ENTER, the  
following on-screen display appears:  
After selecting this icon and pressing ENTER, the  
following on-screen display appears:  
e.g.  
e.g.  
DNR  
DNR2  
Capture  
Storing  
Navi  
DNR1  
DNR Off  
Edge Enhance  
Exit  
1 Move the cursor control to select.  
1 Pause playback at a scene you want to capture.  
2 Move the cursor control to select.  
ENTER  
ENTER  
DNR2:  
DNR1:  
DNR Off:  
To increase the DNR1 effect.  
To reduce minute video noise.  
Off.  
Storing: To sample and store the current picture  
in the player memory.  
Edge Enhance : To sharpen picture edges.  
Navi:  
Exit :  
To return to the NAVI menu.  
To quit the on-screen display.  
2 Press ENTER.  
3 Press ENTER.  
ENTER  
ENTER  
Note  
For details and notes on the DNR picture enhancement,  
see page 39  
.
The stored picture will be displayed as a  
background picture when the player is in the stop  
mode. It is necessary to confirm this process via  
the setup menu 61  
.
Notes  
You can store only one picture. Storing a new picture  
will erase the old one.  
• No operations are permitted in process of sampling  
and storage of background picture.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function Setup  
You can change the default settings to customize  
performance to your preference.  
Customizing the Function  
Settings  
Table of Languages  
Operating a TV with the remote  
control  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
1, 6  
Customizing the Function Settings  
You can change the default settings to customize performance to your  
preference.  
2, 3, 4  
RETURN  
DVD  
VCD  
CD  
Setting procedure  
Move the cursor control (  
/
) to select  
Press SETUP during stop.  
the setting you want to change, then  
press ENTER.  
1
2
3
4
SETUP  
The following on-screen display  
appears.  
Pictu re  
TV Sh a p e  
4 :3 LB  
O ff  
ENTER  
Bla ck e r th a n Bla ck  
Se ttin g  
:
In te rla ce d  
1
Change the selection by the cursor  
control (  
/
) or other buttons, by  
Move the cursor control (  
a symbol for the setting you want to  
change.  
/
) to select  
referring to the corresponding pages  
56 , then press ENTER.  
(See the next page.)  
ENTER  
ENTER  
Repeat steps 3 and 4 to change other  
settings.  
To select another operation, go back to step 2.  
5
6
Picture performance settings  
Output sound settings  
Language settings  
Display settings  
Press SETUP.  
SETUP  
The on-screen display disappears.  
To return to the previous display  
Press RETURN.  
RETURN  
Operational settings  
Initial settings  
Notes  
• The on-screen display disappears when you press the  
SETUP button.  
• The SETUP button can function even during normal  
playback, however some operations may be inaccessible,  
and a message will appear. In this case, try again after  
playback is stopped.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Details  
Page  
DVD  
TV Shape  
To select a picture size according to the aspect  
ratio of your TV.  
56  
56  
DVD  
VCD  
Blacker than Black  
To make an adjustment of the black level on  
your TV using a commercially available test disc  
that contains adjustment signals.  
DVD  
VCD  
Setting: Interlaced  
To adjust the picture quality.  
56  
DVD  
VCD  
CD  
Audio Out Select  
To select an output sound format  
corresponding to your system connection.  
57  
58  
DVD  
Dynamic Range Control  
To turn on or off a function that makes faint  
sounds easier to hear even if you lower the  
volume during late hours playback.  
Karaoke Vocal  
CD Attenuation  
DVD  
CD  
To turn on or off the vocal output during DVD  
KARAOKE disc playback.  
58  
58  
To attenuate sound distortion incurred during  
playback of an audio CD.  
DVD  
VCD  
CD  
On-Screen Language  
Disc Menu Language  
Audio Language  
To select a preferred language for on-screen  
displays.  
59  
59  
59  
59  
DVD  
To select a preferred language for disc menus.  
DVD  
To select a preferred language for the sound  
track.  
DVD  
Subtitle Language  
To select a preferred language for subtitles.  
DVD  
VCD  
CD  
On-Screen Displays  
Background  
To turn on or de-activate the operational status  
display on the TV screen.  
60  
60  
60  
DVD  
VCD  
CD  
To select the background color or background  
picture.  
Screen Saver  
DVD  
To turn the screen saver on or off.  
Pause/Still  
To select the resolution of still pictures.  
(Field/Frame)  
61  
61  
62  
DVD  
DVD  
Parental Lock  
To turn the parental lock function on or off.  
DVD  
VCD  
CD  
Remote Confirmation  
To turn on or off the confirmation beeper  
announcing when each remote command  
received.  
DVD  
VCD  
Title Stop  
PBC  
To turn on or off a feature that automatically  
stops playback after a title has been viewed.  
62  
62  
To use the menu screen when playing a PBC-  
controllable VIDEO CD.  
On-screen Language  
TV Shape  
DVD  
VCD  
CD  
To install the initial system setting.  
63  
Audio Out Select  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings (continued)  
Setting details  
DVD VCD  
Setting : Interlaced  
Pictu re  
You can fine adjust picture quality and store up to 3  
custom picture settings in the memory of the DVD  
video player.  
TV Sh a p e  
Bla ck e r th a n Bla ck  
Se ttin g In te rla ce d  
4 :3 LB  
O ff  
:
1
To select a preset memory setting:  
1) Move the cursor control (  
/
) to select a  
memory number (1 to 3), and press the ENTER  
button.  
DVD  
TV Shape  
Pictu re  
4:3 Letterbox:  
Select when a standard 4:3 TV is  
connected.  
Displays theatrical images with  
masking bars above and below the  
picture.  
TV Sh a p e  
4 :3 LB  
O ff  
1
2
3
Bla ck e r th a n Bla ck  
Se ttin g  
:
In te rla ce d  
1
4:3 Normal:  
Select when a standard 4:3 TV is  
connected.  
Displays pictures cropped to fill  
your TV screen. Either or both  
sides of the picture are cut off.  
2) Move the cursor control (  
/
) to select the  
element, and press the ENTER button.  
Se ttin g  
Co n tra st  
:
In te rla ce d  
0
0
0
0
0
16:9 Widescreen: Select when a 16:9 wide TV is  
connected.  
Brig h tn e ss  
Co lo r  
Tin t  
Sh a rp n e ss  
Bla ck Le ve l  
Ga m m a  
N RML  
Notes  
0
The displayable picture size is preset on the DVD video  
disc. Therefore, the playback picture of some DVD  
video discs may not conform to the picture size you  
select.  
When you play DVD video discs recorded in the 4:3  
picture size only, the playback picture always appears  
in the 4:3 picture size regardless of the TV shape  
setting.  
If you select 16:9 Widescreenand you own a 4:3 TV  
set, the DVD playback picture will be horizontally  
distorted during playback. Images will appear to be  
horizontally compressed. Always be sure that your TV  
shape conforms to the actual TV in use.  
Y/  
C
Tim e Co rre ctio n  
3) Move the cursor control (  
/
) to adjust the  
value, and press the ENTER button.  
(-7) Lower  
(-7) Darker  
(-7) Duller  
(-7) Redder  
(-7) Softer  
Normal  
Contrast  
Brightness  
Color  
Higher (+7)  
Brighter (+7)  
Brighter (+7)  
Greener (+7)  
Sharper (+7)  
Enhanced  
(+)  
Tint  
Sharpness  
Black Level  
Gamma*1  
()  
DVD VCD  
(-3)  
Y/C Time Correction*2  
(+3)  
Blacker than Black  
Off: For normal use.  
*1: Adjust when playback pictures are too dark or too  
whitish.  
*2: Adjust horizontal color deviations. Pictures may  
shift horizontally during the adjustment.  
On: Select when you adjust the black level of your  
TV using a commercially available test disc that  
contains adjustment signals.  
Notes  
These adjustments are not available when connecting  
to a PROGRESSIVE TV.  
The Tint adjustment is not available when connecting to  
a TV via the component video jacks (Y, PB, PR).  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When you select “Analog 6ch”:  
Make the following settings for the built-in 5.1ch  
surround decoder.  
Au d io  
Au d io O u t Se le ct  
Dy n a m ic Ra n g e Co n tro l O n  
Bitstre a m  
Ka ra o k e Vo ca l  
CD Atte n u a tio n  
O ff  
O ff  
C
An a lo g 6 ch  
C. S. Sp e a k e r Size  
La rg e  
O n  
C
S
(Ce n te r) Sp e a k e r  
(Su rro u n d ) Sp e a k e r  
O n  
Su b w o o fe r  
O n  
Ce n te r Ch a n n e l De la y  
0 m se c  
Su rro u n d Ch a n n e l De la y 5 m se c  
Te st To n e  
DVD VCD  
CD  
Audio Out Select  
Select the output sound format corresponding to your  
system connection.  
1) Select an item by moving the cursor control  
(
/
), and press the ENTER button.  
For details of sound recording systems, see 43  
.
2) Make the settings (see below) by moving the  
Bitstream:  
Select when connected to an amplifier  
equipped with a Dolby Digital, DTS,  
21 22  
cursor control (  
ENTER button.  
/
/
/
), and press the  
MPEG1 or MPEG2 decoder.  
The DVD video player outputs digital  
audio information in the bitstream  
format when you play a DVD video disc  
recorded on the Dolby Digital, DTS,  
MPEG1 or MPEG2 recording system.  
C.S.Speaker Size  
Small: When the center speaker or surround  
speakers cannot reproduce low frequency  
signals below 120 Hz.  
Large: When the center speaker and surround  
speakers can reproduce low frequency  
signals below 120 Hz.  
Analog 6ch: Select when connected to an AV  
amplifier equipped with 5.1ch audio  
inputs. 23  
C(Center) Speaker  
Off: When center speaker is not connected.  
On: When you connect center speaker.  
This DVD video player is equipped with  
a Dolby Digital and MPEG decoder.  
The next screen will detail the  
appropriate settings.  
S(Surround) Speaker  
Off: When surround speakers are not connected.  
On: When you connect surround speakers.  
Analog 2ch: Select when connected to a TV, or  
Dolby Pro Logic or stereo system via  
the analog audio jacks. 18 19 21  
Subwoofer  
Off: When a sub woofer is not connected.  
On: When you connect a sub woofer.  
PCM:  
Select when connected to a 2 channel  
digital stereo amplifier. 23  
The DVD video player outputs sounds  
in the PCM 2ch format when you play a  
DVD video disc recorded on the Dolby  
Digital, MPEG1 or MPEG2 recording  
system.  
(Continued)  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings (continued)  
Setting details  
Note  
(Continued)  
Adjusting the delay time:  
Depending on the disc, 6 channel sounds may not be  
output via the 5.1 CH SURROUND AUDIO OUT jacks.  
When enjoying 5.1ch surround playback, it is ideal  
to choose a listening position that is the same  
distance from each speaker. By adjusting the  
delay time of the center/surround speakers, you  
can virtually create an ideal listening environment  
(as if the center/surround speakers were at their  
ideal locations respectively as below.)  
DVD  
Dynamic Range Control  
Off: Full dynamic range is maintained.  
On: Dynamic range is reduced.  
Notes  
Ideal location of a  
center speaker  
This function works only during playback of Dolby  
Digital recorded discs.  
The level of Dynamic Range Reduction may differ  
depending on the DVD video disc.  
(A)  
FL  
FR  
Df  
Dc  
All speakers should  
be located within a  
circle with a radius  
of Df.  
SW  
DVD  
Karaoke Vocal  
Ds  
Off: The primary vocal is not output.  
On: The primary vocal is output when it is recorded  
on the disc.  
(B)  
SR  
SL  
Ideal location of a  
surround speaker  
Notes  
The vocal output feature is used during playback of  
Dolby Digital (multi-channel) recorded DVD KARAOKE  
discs. This feature allows you to turn off vocal audio  
tracks, or restore them for background accompaniment.  
When playing KARAOKE, connect appropriate audio  
equipment such as an amplifier to the DVD video  
player.  
Center Channel Delay  
0msec: When Df equals Dc.  
1msec: When (A) is approx. 34 cm (13 inch)  
2msec: When (A) is approx. 68 cm (27 inch)  
3msec: When (A) is approx. 102 cm (40 inch) . . .  
*(A) = Df Dc  
Get your optimum value (0, 1, 2 . . . 5)  
dividing (A) by 34.  
CD  
CD Attenuation  
HDCD enhances the output sound level of audio CD  
by approximately 6 dB. As such, distortion may occur  
in some connected products that are unable to  
compensate for a wide range of input signal levels.  
(e.g. TV, stereo receivers)  
Surround Channel Delay  
0msec: When Df equals Ds.  
1msec: When (B) is approx. 34 cm (13 inch)  
2msec: When (B) is approx. 68 cm (27 inch)  
3msec: When (B) is approx. 102 cm (40 inch) . . .  
*(B) = Df Ds  
Off: For normal use.  
On: Select when an audio CD sound is distorted.  
Sound volume of an audio CD is lessened.  
Get your optimum value (0, 1, 2 . . . 15)  
dividing (B) by 34.  
3) Select Test Toneand press the ENTER  
button.  
The DVD video player outputs a test signal to  
each speaker when it is in stop mode. When  
playing a DVD video disc, it substitutes the  
current sound for the test signal.  
Move the cursor control (  
/
) to select the  
receiving speakers, and adjust the volume of  
each speaker at the same level by moving the  
cursor control (  
/
).  
If all the volume levels cannot be equalized,  
adjust them on the amplifier.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C
DVD  
Audio Language  
La n g u a g e  
O n -Scre e n La n g u a g e EN G  
Disc Me n u La n g u a g e EN G  
English: To play sound tracks in English.  
French: To play sound tracks in French.  
Spanish: To play sound tracks in Spanish.  
Others: To make a further choice.  
After pressing the ENTER button, follow  
steps 1) - 4) below.  
Au d io La n g u a g e  
Su b title La n g u a g e  
EN G  
– – –  
1) Obtain the abbreviation of the preferred  
language from the list 64  
2) Select the first character by moving the cursor  
control ( ).  
3) Move the cursor control (  
select the second character by moving the  
cursor control ( ).  
.
DVD VCD  
CD  
On-Screen Language  
/
English: To view on-screen displays in English.  
Français:To view on-screen displays in French.  
Español: To view on-screen displays in Spanish.  
/
) to shift and  
/
DVD  
Disc Menu Language  
C
La n g u a g e  
English: To display disc menus in English.  
French: To display disc menus in French.  
Spanish To display disc menus in Spanish.  
Others: To make a further choice.  
After pressing the ENTER button, follow  
steps 1) - 4) below.  
O n -Scre e n La n g u a g e EN G  
Disc Me n u La n g u a g e EN G  
En g lish  
Fre n ch  
Sp a n ish  
O th e rs  
Au d io La n g u a g e  
Su b title La n g u a g e  
EN G  
– – –  
Co d e  
S
E
1) Obtain the abbreviation of the preferred  
language from the list 64  
2) Select the first character by moving the cursor  
control ( ).  
3) Move the cursor control (  
select the second character by moving the  
cursor control ( ).  
.
4) Press the ENTER button.  
Note  
/
Some DVD video discs may be played in a different  
language than you selected. A prior language may be  
programmed on the disc.  
/
) to shift and  
/
DVD  
La n g u a g e  
Subtitle Language  
O n -Scre e n La n g u a g e EN G  
Disc Me n u La n g u a g e EN G  
En g lish  
Fre n ch  
Sp a n ish  
O th e rs  
English:  
French:  
Spanish:  
To display subtitles in English.  
To display subtitles in French.  
To display subtitles in Spanish.  
Au d io La n g u a g e  
Su b title La n g u a g e  
EN G  
– – –  
Co d e  
S
E
No Subtitle: To disable subtitles.  
Others:  
To make a further choice.  
After pressing the ENTER button,  
follow steps 1) - 4) below.  
4) Press the ENTER button.  
1) Obtain the abbreviation of the preferred  
64  
Note  
language from the list  
2) Select the first character by moving the cursor  
control ( ).  
.
Some DVD video discs may not include your pre-  
selected language. In this case, the DVD video player  
automatically displays disc menus consistent with the  
discs initial language setting.  
/
(Continued)  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings (continued)  
Setting details  
(Continued)  
Disp la y  
3) Move the cursor control (  
select the second character by moving the  
cursor control ( ).  
/
) to shift and  
O n -Scre e n Disp la y s O n  
Ba ck g ro u n d  
Scre e n Sa ve r  
Gra y  
O n  
/
La n g u a g e  
O n -Scre e n La n g u a g e EN G  
Disc Me n u La n g u a g e EN G  
En g lish  
Fre n ch  
Au d io La n g u a g e  
Su b title La n g u a g e  
EN G  
Sp a n ish  
N o Su b title  
O th e rs  
DVD VCD  
CD  
On-Screen Displays  
– – –  
Co d e  
A
A
Off: Operational modes (e.g. Play, “  
displayed.  
On: Operational modes (e.g. Play, “  
displayed on-screen.  
) are not  
) are  
4) Press the ENTER button.  
Notes  
DVD VCD  
CD  
Background  
Some DVD video discs may be set to display subtitles  
in a different language than you selected. A prior  
subtitle language may be programmed on the disc.  
Some DVD video discs allow you to change subtitle  
selections only via the disc menu. If this is the case,  
press the MENU button and choose the appropriate  
subtitle language from the selection on the disc menu.  
Blue:  
Gray:  
Blue background.  
Gray background.  
Capture: To use a picture you sampled and stored in  
the memory using the Capture feature 52  
as a background.  
Jacket: To use the jacket picture included on some  
discs as a background. If it is not included,  
a gray background will be substituted.  
DVD  
Screen Saver  
Off: The screen saver is disengaged.  
On: The screen saver operates.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1) Press the number buttons to create a personal  
4-digit security code, then press the ENTER  
button.  
O p e ra tio n  
Pa u se / Still  
Pa re n ta l Lo ck  
Au to  
O ff  
If you make a mistake before pressing the  
ENTER button, press the CLEAR button and  
enter your 4-digit security code again.  
Re m o te Co n firm a tio n O n  
Title Sto p  
PBC  
O ff  
O n  
2) Enter the code of a country/area whose  
standards were used to rate the DVD video  
disc, referring to the list below.  
DVD  
Pause/Still  
Country/Area  
AUSTRALIA  
BELGIUM  
CANADA  
CHINA  
CHINA HONG KONG  
DENMARK  
FINLAND  
Code  
AU  
BE  
CA  
CN  
HK  
DK  
FI  
Auto:  
For normal use. Still and fast motion images  
can be paused.  
Frame: The resolution of still pictures is improved,  
so that you can make a motionless picture  
more clearer when you pause it.  
DVD  
Parental Lock  
FRANCE  
FR  
DE  
ID  
GERMANY  
INDONESIA  
ITALY  
DVD video discs equipped with the parental lock  
function are rated according to their content. The  
contents allowed by a parental lock level and the way  
a DVD video disc can be controlled may vary from  
disc to disc. For example, if the disc allowed you  
could edit out violent scenes unsuitable for children  
and replace them with more suitable scenes, or lock  
out playback of the disc altogether.  
IT  
JAPAN  
JP  
MALAYSIA  
NETHERLANDS  
NORWAY  
PHILIPPINES  
RUSSIAN FEDERATION  
SINGAPORE  
SPAIN  
SWEDEN  
SWITZERLAND  
TAIWAN  
THAILAND  
UNITED KINGDOM  
UNITED STATES  
MY  
NL  
NO  
PH  
RU  
SG  
ES  
SE  
CH  
TW  
TH  
GB  
US  
• DVD video discs may or may not respond to the  
parental lock settings. This is not a defect in the DVD  
video player. Make sure this function works with your  
DVD video discs.  
Off: The parental lock feature does not function.  
After pressing the ENTER button, follow step 1)  
below.  
On: To activate the parental lock feature or change  
the settings.  
a) Select the first character by moving the  
cursor control ( ).  
b) Move the cursor control (  
select the second character by moving the  
cursor control ( ).  
c) Press the ENTER button.  
/
After pressing the ENTER button, follow steps  
1) - 3) below.  
/
) to shift and  
/
O p e ra tio n  
Pa u se / Still  
Au to  
O ff  
O ff  
O n  
Pa re n ta l Lo ck  
(Continued)  
Re m o te Co n firm a tio n O n  
Se cu rity Co d e  
– – – –  
Title Sto p  
PBC  
O ff  
O n  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings (continued)  
Setting details  
(Continued)  
DVD VCD  
CD  
Remote Confirmation  
3) Move the cursor control (  
/
) to select the  
Off: The beeper does not sound.  
On: The beeper sounds with each remote operation.  
parental lock level, then press the ENTER  
button.  
DVD  
Title Stop  
O p e ra tio n  
Off: The DVD video player continues after playback  
of a title is completed.  
On: The DVD video player stops after playback of a  
title is completed.  
Pa u se / Still  
Au to  
O ff  
Pa re n ta l Lo ck  
Re m o te Co n firm a tio n O n  
Are a Co d e  
Le ve l  
S
U
7
Title Sto p  
PBC  
O ff  
O n  
VCD  
PBC  
You cannot play DVD video discs rated higher than  
the level you selected unless you cancel the parental  
lock function.  
For example, when you select level 7, discs rated  
higher than level 7 are locked out and cannot be  
played.  
Off: When playing a VIDEO CD without using the  
menu.  
On: To use the menu when playing a PBC-featured  
VIDEO CD.  
The parental lock level is equivalent to the following  
USA movie ratings.  
Level 7: NC-17  
Level 6: R  
Level 4: PG 13  
Level 3: PG  
Level 1: G  
The parental lock levels for other countries/areas  
than U.S. are included for future use. Check the  
appropriate parental lock level when you buy a DVD  
video disc equipped with the parental lock feature in  
the future.  
To change the parental lock level  
Follow steps 1) - 3).  
To change your 4-digit security code  
1) After selecting Onor Off,press the STOP  
button four times, then press the ENTER  
button.  
STOP  
STOP  
STOP  
STOP  
ENTER  
The 4-digit security code is cleared.  
2) Press the number buttons to create a new  
4-digit security code.  
3) Press the ENTER button.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S
In itia l Se tu p  
O n -Scre e n La n g u a g e EN G  
TV Sh a p e  
4 :3 LB  
Bitstre a m  
Au d io O u t Se le ct  
DVD VCD  
CD  
Initial Setup  
1) Move the cursor control (  
/
) to select On-  
Screen Language,and press the ENTER  
button.  
ENTER  
ENTER  
2) Select a language moving the cursor control  
(
/
), and press the ENTER button.  
59  
See page  
, On-screen Language.”  
ENTER  
ENTER  
3) Make your selection in the same manner as  
step 1) then step 2).  
56  
See page  
See page  
, TV Shape.”  
, Audio Out Select.”  
57  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Table of Languages  
Table of languages and their abbreviations  
Abbreviation  
Language  
Abbreviation  
Language  
Abbreviation  
Language  
– – –  
No alternate  
language  
Chinese  
Dutch  
English  
French  
German  
Italian  
Japanese  
Korean  
GN  
GU  
HA  
HI  
HR  
HU  
HY  
IA  
IE  
IK  
IN  
IS  
Guarani  
Gujarati  
Hausa  
Hindi  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
Inupiak  
Indonesian  
Icelandic  
Hebrew  
PT  
QU  
RM  
RN  
RO  
RU  
RW  
SA  
SD  
SG  
SH  
SI  
Portuguese  
Quechua  
Rhaeto-Romance  
Kirundi  
Rumanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
CHI (ZH)  
DUT (NL)  
ENG (EN)  
FRE (FR)  
GER (DE)  
ITA (IT)  
JPN (JA)  
KOR (KO)  
MAY (MS)  
SPA (ES)  
AA  
Sango  
Malay  
Spanish  
Afar  
Serbo-Croatian  
Singhalese  
Slovak  
Slovenian  
Samoan  
Shona  
IW  
JI  
SK  
SL  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
BG  
BH  
BI  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DA  
DZ  
EL  
EO  
ET  
EU  
FA  
FI  
FJ  
FO  
FY  
GA  
GD  
Abkhazian  
Afrikaans  
Amharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Belorussian  
Bulgarian  
Bihari  
Bislama  
Bengali, Bangla  
Tibetan  
Breton  
Catalan  
Corsican  
Czech  
Welsh  
Danish  
Bhutani  
Greek  
Esperanto  
Estonian  
Basque  
Persian  
Finnish  
Fiji  
Faroese  
Frisian  
Yiddish  
JW  
KA  
KK  
KL  
KM  
KN  
KS  
KU  
KY  
LA  
LN  
LO  
LT  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Kashmiri  
Kurdish  
Kirghiz  
Latin  
Lingala  
Laotian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Maltese  
Burmese  
Nauru  
Nepali  
Norwegian  
Occitan  
SM  
SN  
SO  
SQ  
SR  
SS  
ST  
SU  
SV  
SW  
TA  
TE  
TG  
TH  
TI  
TK  
TL  
TN  
TO  
TR  
TS  
TT  
TW  
UK  
UR  
UZ  
VI  
VO  
WO  
XH  
YO  
ZU  
Somali  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swedish  
Swahili  
Tamil  
Telugu  
Tajik  
Thai  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tongan  
Turkish  
Tsonga  
Tatar  
Twi  
Ukrainian  
Urdu  
LV  
MG  
MI  
MK  
ML  
MN  
MO  
MR  
MT  
MY  
NA  
NE  
NO  
OC  
OM  
OR  
PA  
PL  
PS  
Uzbek  
Vietnamese  
Volapük  
Wolof  
Xhosa  
Yoruba  
(Afan) Oromo  
Oriya  
Panjabi  
Polish  
Pashto, Pushto  
Irish  
Scottish Gaelic  
Galician  
GL  
Zulu  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating a TV with the remote  
control  
ENTER  
You can operate the basic functions of selected TVs  
using the supplied remote control.  
POWER  
TV/VIDEO  
VOL  
CH  
Number buttons  
Operating a TV with the remote control  
Preparation  
Follow the instruction of To program the remote controlto set the brand code.  
To program the remote control  
Point the remote control at your TV, and  
use buttons as follows.  
1 While holding down ENTER, press the number  
buttons that correspond to your TVs brand code  
referring to the list on the next page.  
POWER  
TV/VIDEO  
To turn the power on and off.  
To select a video input.  
To adjust the volume.  
To select a channel.  
e.g. To Program brand code 0071.  
VOL  
CH  
/
/
ENTER  
0
0
7
1
Hold down.  
2 Release ENTER.  
The DVD remote control memorizes the selected  
brand code.  
Notes  
The remote control is programmed at the factory to operate  
TOSHIBA TVs.  
A single brand may use different codes depending on the  
particular model. Enter the correct number referring to the  
brand code table.  
For some brands, several brand codes are provided. Try  
each of them until the remote control operates your TV.  
Some TVs may not respond to all of the functions in the  
table above, or may not be operated at all with this remote  
control. In this case, operate that TV with its own remote  
control.  
POWER  
TV/VIDEO  
VOL  
CH  
Close the cover to  
use these buttons.  
If you replace the remote controls batteries, remember to  
reprogram the brand codes for TV.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Brand code table  
Brand name  
Brand code  
Brand name  
RCA  
Brand code  
TOSHIBA  
BELL & HOWELL  
CARVER  
CITIZEN  
CURTIS MATHES  
0001 0071 0211 0571  
0471 0651 0071 0281 0441  
0201 0251 0281 0411 0501  
0201 0251  
0471 0651 0071 0281 0441  
0311 0431 0521 0571  
0201 0231 0471 0481 0571  
0581 0651  
0041 0121 0181 0201 0281  
0471 0571 0651  
0941 0951 0961 0971 0981  
0991 1041  
0201 0251 0281 0411 0501  
0001 0511 0201 0231 0471  
0481 0571 0581 0651  
0021 0221 0251 0351 0371  
0381 0431 0571 0641 0751  
0501  
0971 1071 1081 1091 0201  
1041 0501  
REALISTIC  
0631 1001 1011 1021 1031  
0851 0201 0501 0481 0321  
0331 0501 0651 0771  
0071 0091 0281 0291 0341  
0471 0651  
0171 0181 0251 0281 0411  
0491 0501 0631 0661 0791  
0021 0041 0081 0121 0171  
0181 0201 0231 0241 0451  
0571 0651 0671 0701 0711  
0721  
0001 0191 0491 0201 0501  
0071 0211 0571 0041 0121  
0181 0201 0281 0471 0651  
0851 0511 0571 0201 0501  
0441 0451 0571 0681  
0201 0481  
0501 0071 0191 0221 0461  
0471 0591 0611 0651 0371  
0511 0531 0841  
RUNCO  
EMERSON  
FISHER  
GE  
SAMSUNG  
SANYO  
GOLDSTAR  
HALLMARK  
SEARS  
HITACHI  
SHARP  
SONY  
SOUNDESIGN  
SYLVANIA  
INFINITY  
JBL  
JVC  
LXI  
MAGNAVOX  
0501  
0311 0431 0521 0571  
0001 0511 0851  
0501 0071 0191 0221 0461  
0471 0591 0611 0651  
0201 0501  
TANDY  
0171 0511 0851 0571 0201  
0501  
0371 0501 0511 0531 0761  
0841 0911  
MARANTZ  
MEMOREX  
MGA  
0411  
0201  
TECHNICS  
MITSUBISHI  
0201 0321 0331 0451 0501  
0511 0571 0651 0771  
0201 0251  
TEKNIKA  
TMK  
VIDTECH  
0201 0251 0481 0501  
0201 0251  
0201 0501 0401 0411 0851  
0511  
MTC  
NAD  
0001 0511  
OPTONICA  
PANASONIC  
0511 0851 0571 0201 0501  
0371 0501 0511 0531 0761  
0841 0911 1061  
0071 0111 0181 0201 0271  
0301 0461 0501 0651  
0071 0191 0221 0461 0471  
0501 0591 0611 0651  
0201  
WARDS  
ZENITH  
0201 0501 0001 0191 0481  
0491 0851 0511 0571 0071  
0281 0441  
PHILCO  
PHILIPS  
0931  
PROTON  
PULSAR  
0931 0071 0091 0281 0291  
0341 0471 0651  
QUASAR  
0371 0501 0511 0531 0761  
0841 0911  
RADIO SHACK  
0631 1001 1011 1021 1031  
0851 0201 0501 0481 0321  
0331 0501 0651 0771  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Before Calling Service  
Personnel  
Specifications  
LIMITED WARRANTY DVD  
VIDEO PLAYER  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Before Calling Service Personnel  
Check the following guide for the possible cause of a problem before contacting service.  
Symptoms and correction  
Symptom  
Cause  
Correction  
Page  
No power.  
• The power plug is disconnected.  
• Connect the power plug securely into the  
wall outlet.  
18  
The DVD video player turned • The automatic power off function turned  
• Press the PLAY button.  
27  
26  
off by itself.  
the unit off.  
No picture.  
• The TV is not set to receive DVD signal  
output.  
• Select the appropriate video input mode  
on the TV so the picture from the DVD  
video player appears on the TV screen.  
• The video cable is not connected securely. Connect the video cable securely into the 18, 19  
appropriate jacks.  
No sound.  
• The equipment connected with the audio  
cable is not set to receive DVD signal  
output.  
• Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD video player.  
26  
• The audio cable is not connected securely. Connect the audio cable securely into  
the appropriate jacks.  
18-23  
26  
• The audio receiver or TV is turned off.  
Turn on the equipment connected with  
the audio cable.  
• The setting of output sound format is  
incorrect.  
• Select the proper audio setting.  
42, 54  
57  
The playback picture has  
occasional distortion.  
• The disc is dirty.  
• Eject the disc and clean it.  
9
• It is in fast forward or fast reverse  
playback.  
• Sometimes a small amount of picture  
distortion may appear. This is not a  
malfunction.  
Brightness is unstable or  
noises are present in the  
playback pictures.  
• The effect of copy protection.  
• Connect the DVD video player directly to  
the TV. Avoid connecting the DVD video  
player to a VCR or TV/VCR combination.  
18  
The DVD video player does  
not start playback.  
• No disc is inserted.  
• Insert a disc.  
26  
10  
• An unplayable disc is inserted.  
• Insert a playable disc. (Check the disc  
type and color system.)  
• The disc is placed upside down.  
• Place the disc with the playback side  
down.  
26  
26  
• The disc is not placed within the guide.  
• Place the disc correctly inside the guide  
on the disc tray.  
• The disc is dirty.  
• Clean the disc.  
9
• The parental lock function is set.  
• Cancel the parental lock function or  
change the parental lock level.  
54, 61  
Playback does not follow the  
course of the disc’s program.  
• It is in the mode of repeat playback,  
memory playback, etc.  
• These operations may prevent a proper  
progress of the contents.  
Buttons do not work.  
• Power supply fluctuations or other  
abnormalities such as static electricity may  
interrupt correct operations.  
Turn the power on or off with the POWER  
button. Or disconnect the power plug and  
insert it into the wall outlet again.  
The remote control does not  
work properly.  
• The remote control is not pointed at the  
remote sensor of the DVD video player.  
• Point the remote control at the remote  
sensor of the DVD video player.  
15  
15  
15  
• The remote control is too far from the DVD • Operate the remote control within about  
video player.  
7 m.  
• The batteries in the remote control are  
exhausted.  
• Replace the batteries with new ones.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
DVD video player / outputs / supplied accessories  
DVD Video Player  
Power supply  
Power consumption  
Mass  
120 V AC, 60 Hz  
19 W  
6.5 kg  
External dimensions  
Signal system  
Laser  
435 × 120 × 400 mm (W/H/D)  
Standard NTSC  
Semiconductor laser, wavelength 650 nm / 780 nm  
Frequency range  
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz  
96 kHz sampling 4 Hz to 44 kHz  
Signal-to-noise ratio  
Audio dynamic range  
Harmonic distortion  
Wow and flutter  
More than 112 dB  
More than 106 dB  
Less than 0.001 %  
Below measurable level (less than ±0.001 % (W.PEAK))  
Temperature: 5 °C to 35 °C, Operation status: Horizontal  
Operating conditions  
Outputs  
Video output  
1.0 V (p-p), 75 , negative sync., pin jack × 1  
S video output  
(Y) 1.0 V (p-p), 75 , negative sync., Mini DIN 4-pin × 1  
(C) 0.286 V (p-p), 75 Ω  
Component video output  
(Y) 1.0 V (p-p), 75 , negative sync., pin jack × 1  
(PB)/(PR) 0.7 V (p-p), 75 , pin jack × 2  
Audio output (BITSTREAM/PCM  
OPTICAL)  
Optical connector × 1  
Audio output (BITSTREAM/PCM  
COAXIAL)  
0.5 V (p-p), 75 , pin jack × 1  
Audio output (2CH AUDIO)  
2.0 V (rms), 220 , pin jacks (L, R) × 1  
Audio output (5.1CH SURROUND)  
2.0 V (rms), 220 , pin jacks × 6  
Supplied Accessories  
Audio/video cable ................................................. 1  
Remote control (SE-R0033) ................................. 1  
Batteries (AAA) ..................................................... 2  
Power cord ........................................................... 1  
• Designs and specifications are subject to change without notice.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
LIMITED WARRANTY DVD VIDEO PLAYER  
Toshiba America Consumer Products, Inc. (“TACP”), Toshiba Hawaii (“THI”) and Toshiba Canada Limited (“TCL) make the  
following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift  
from the original purchaser and to no other purchaser or transferee.  
Limited Ninety (90) Day Warranty  
Commercial Units  
TACP/THI warrant this product against defects in materials  
or workmanship for a period of ninety (90) days after the  
date of original retail purchase. During this period, TACP/  
THI will repair or replace a defective product or part, at their  
option, with a new or refurbished product or part without  
charge to you. You must deliver the entire product to a  
TACP/THI Authorized Service Station. You are responsible  
for all transportation and insurance charges for the unit to  
and from the Authorized Service Station. If you live in the  
U.S.A. you may, at your option, return your DVD Unit to:  
Toshiba America Consumer Products Inc.  
Products sold and used for commercial use have a limited  
ninety (90) day warranty for all parts and labor.  
Owner’s Manual  
You should read the owner’s manual thoroughly before  
operating this product.You should complete and mail the  
enclosed Demographic card within ten (10) days after you,  
or the person who has given you this product as a gift,  
purchased this product. This is one way to enable TACP to  
provide you with better customer service and improved  
products. Failure to return the card will not affect your rights  
under this warranty.  
Returns Center  
1420C Toshiba Dr.  
Lebanon, TN 37087  
Your Responsibility  
Upon receipt we will, at our option, exchange the DVD Unit  
with a new or refurbished unit. Canadian consumers are  
requested to contact TCL. In Hawaii consumers are  
requested to contact THI.  
The above warranties are subject to the following  
conditions:  
(1) You must retain your bill of sale or provide other proof of  
purchase.  
(2) You must notify a TACP/THI/TCL /Authorized Service  
Station within thirty (30) days after you discover a  
defective product or part.  
(3) All warranty servicing of this product must be made by a  
TACP/THI/TCL Authorized Service Station.  
(4) U.S.A. warranties are effective only if the product is  
purchased and operated in the Continental U.S.A. or  
Puerto Rico.  
(5) Labor service charges for set installation. Set up,  
adjustment of customer controls and installation or  
repair of antenna systems are not covered by this  
warranty. Reception problems caused by inadequate  
antenna systems are your responsibility.  
(6) Warranties extend only to defects in materials or  
workmanship as limited above and do not extend to any  
product or parts which have been lost or discarded by  
you or to damage to products or parts caused by  
misuse, accident, damage caused by Acts of God, such  
as lighting or fluctuations in electric power, improper  
installation, improper maintenance or use in violation of  
instructions furnished by us; or to units which have  
been altered or modified without authorization of TACP/  
THI/TCL or to damage to products or part thereof which  
have had the serial number removed, altered, defaced  
or rendered illegible.  
Limited One (1)Year Warranty  
TACP/THI further warrant the parts in this product against  
defects in materials or workmanship for a period of one (1)  
year after the date of original retail purchase. During this  
period, TACP/THI will repair or replace a defective product  
or part, at their option, with a new or refurbished product or  
part without charge to you, except that if a defective part is  
replaced after ninety (90) days from the date of the original  
retail purchase you pay labor charges involved in the  
replacement.You must also deliver the entire product to a  
TACP/THI Authorized Service Station. You are responsible  
for all transportation and insurance charges for the unit to  
and from the Authorized Service Station. If you live in the  
U.S.A. you may, at your option, return your DVD Unit to:  
Toshiba America Consumer Products Inc.  
Returns Center  
1420C Toshiba Dr.  
Lebanon, TN 37087  
Upon receipt we will, at our option, exchange the DVD Unit  
with a new or refurbished unit. Canadian Consumers are  
requested to contact TCL. In Hawaii consumers are  
requested to contact THI.  
Rental Units  
The warranty for rental units begin with the first rental or  
thirty (30) days from the date of shipment to the rental firm,  
whichever comes first.  
(7) Should you elect to return your DVD Unit to TACP after  
the ninety (90) days and within one (1) year, or after the  
warranty period has expired: Call (800)-631-3811 to  
receive information concerning an exchange price.  
Payment must be enclosed with product in the form of a  
certified check or money order including reason for  
return.  
(8) Physically damaged DVD Units are not acceptable for  
repair or exchange whether in or out of warranty and  
will be returned as received.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Obtain Warranty Service  
(1) Refer to the troubleshooting guide in your owner’s manual. This check list may solve your problem.  
(2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30)  
days after you find a defective product or part.  
(3) Arrange for the delivery of the product to the TACP/THI/TCL Authorized Service Station or TACP Return Center.  
Products shipped to the Service Station must be insured and safely and securely packed, preferably in the original  
shipping carton, and a letter explaining the defect and also a copy of the bill of sale or other proof of purchase must be  
enclosed.  
In Canada contact:  
Consumer Electronics Group  
191 McNabb Street  
Markham, Ontario L3R 8H2  
(905)-470-5400  
In the Continental United States contact:  
In Hawaii contact:  
Toshiba Hawaii Inc.  
327 Kamakee Street  
Honolulu, HA 96814  
(808)-521-5377  
Consumer Electronics Group  
22171 Fraserwood Way  
Richmond, B.C. V6W 1J5  
(604)-303-2500  
Toll Free  
800-631-3811  
Consumer Electronics Group  
1643 North Service Road  
Droval, QC H9P 1J1  
(514)-856-4100  
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are  
expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state  
law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and  
similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall TACP/THI  
be liable for consequential or incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in  
any manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP/THI arising  
under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days  
from the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising  
under state law.  
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some  
states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or  
limitation of incidental or consequential damages, so the above provisions may not apply to you.  
ATTENTION CANADIAN CONSUMERS:  
Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and forward  
this completed form with a copy of bill of sale to TOSHIBA OF CANADA to “Register and Validate” their warranty. Product  
must be purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada are not  
covered by these warranties.  
IMPORTANT: PACKING AND SHIPPING INSTRUCTION  
When you send the product to a Service Station, you must use the original carton box and packing material, then insert the  
original carton box containing the unit into another carton using more packing material.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed in Malaysia  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. LOCATION OF MAIN PARTS AND MECHANISM PARTS  
2-1. Location of Main Parts  
Fig. 1-2-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tech Craft TV Video Accessories NCL62 User Manual
TiVo DVR R24008A User Manual
Toshiba CD Player C6609 1201M1 User Manual
TRENDnet Network Card TEG MGBSX User Manual
Ultra Start Automobile Alarm 4500 User Manual
Uniden Cordless Telephone DCX 770 User Manual
Uniden Cordless Telephone EXP 2900 User Manual
Uniden Scanner BC250D User Manual
Vivitar Digital Camera 8690 User Manual
VocoPro CD Player CDG X3P User Manual