Toshiba DVD Player P200 Series User Manual

User’s Manual  
P200 Series  
computers.toshiba-europe.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P200 Series  
Manufactured under license from Dolby Laboratories. "Dolby" and the  
double-D symbol are trademarks of Dolby Laboratories. Confidential  
unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights  
reserved.  
Manufactured under license from Digital Theater Systems, Inc. U.S. Pat.  
No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535  
and other U.S. and world-wide patents issued and pending. "DTS" and  
"DTS Digital Surround" are registered trademarks of Digital Theater  
Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights  
Reserved.  
Bluetooth is a registered trademark owned by its proprietor and used by  
TOSHIBA under license.  
iLINK is a trademark of Sony Corporation.  
Other trademarks and registered trademarks not listed above may be used  
in this manual.  
Macrovision License of Notice  
This product incorporates copyright protection technology that is protected  
by U.S. patents and other intellectual property rights. Use of this copyright  
protection technology must be authorized by Macrovision, and is intended  
for home and other limited viewing uses only unless otherwise authorized  
by Macrovision. Reverse engineering or disassembly is prohibited.  
Safety Instructions  
Use the following safety guidelines to help protect yourself and your  
computer.  
When Using Your Computer  
Do not operate your portable computer for an extended period of time with  
the base resting directly on your body. With extended operation, heat can  
potentially build up in the base. Allowing sustained contact with the skin  
could cause discomfort or, eventually, a burn.  
Do not attempt to service the computer yourself. Always follow  
installation instructions closely.  
Do not carry a battery in your pocket, purse, or other container where  
metal objects (such as car keys) could short-circuit the battery  
terminals. The resulting excessive current follow can cause extremely  
high temperatures and may result in damage from burns.  
Be sure that nothing rests on your AC adapter's power cable and that  
the cable is not located where it can be tripped over or stepped on.  
Place the AC adapter in a ventilated area, such as a desk top or on the  
floor, when you use it to run the computer or to charge the battery. Do  
not cover the AC adapter with papers or other items that will reduce  
cooling; also, do not use the AC adapter while it is inside a carrying  
case.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iii  
P200 Series  
Use only the AC adapter and batteries that are approved for use with  
this computer. Use of another type of battery or AC adapter may risk fire  
or explosion.  
Before you connect the computer to a power source, ensure that the  
voltage rating of the AC adapter matches that of the available power  
source.  
115V/60 Hz in most of North and South America and some Far Eastern  
countries such as Taiwan.  
100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan.  
230 V/50 Hz in most of Europe, the Middle East, and the Far East.  
If you use an extension cable with your AC adapter, ensure that the total  
ampere rating of the products that are plugged into it do not exceed the  
ampere rating of the extension cable itself.  
To help avoid the potential hazard of electric shock, do not connect or  
disconnect any cables or perform maintenance or reconfiguration of this  
product during an electrical storm.  
When setting up the computer for work, place it on a level surface.  
Do not dispose of batteries in a fire. They may explode. Check with  
local authorities for disposal instructions.  
When travelling, do not check the computer as baggage. You can put  
your computer through an X-ray security machine, but never put your  
computer through a metal detector. If you have the computer checked  
by hand, be sure to have a charged battery available in case you are  
asked to turn on the computer.  
When travelling with the hard drive removed from the computer, wrap  
the drive in a non-conducting material, such as cloth or paper. If you  
have the drive checked by hand, be ready to install the drive in the  
computer. Your can put the hard drive through an X-ray security  
machine, but never put it through a metal detector.  
When travelling, do not place the computer in overhead storage  
compartments where it could slide around. Do not drop your computer  
or subject it to other mechanical shocks.  
Protect your computer, battery, and hard drive from environmental  
hazards such as dirt, dust, food, liquids, temperature extremes, and  
overexposure to sunlight.  
When you move your computer between environments with very  
different temperature and/or humidity ranges, condensation may form  
on or within the computer. To avoid damaging the computer, allow  
sufficient time for the moisture to evaporate before using the computer.  
When you disconnect a cable, pull on its connector or on its strain relief  
loop, not on the cable itself. As you pull out the connector, keep it  
evenly aligned to avoid bending any connector pins. Also, before you  
connect a cable make sure both connectors are correctly oriented and  
aligned.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iv  
P200 Series  
Before you clean your computer, turn if off, unplug it from its power  
source, and remove the battery.  
Handle components with care. Hold a component such as a memory  
module by its edges, not its pins.  
When using telephone equipment in conjunction with your computer, basic  
safety precautions should always be followed to reduce the risk of fire,  
electric shock and injury to persons, including the following:  
Do not use this product near water, for example, near a bathtub,  
washing bowl, kitchen sink or laundry tub, in a wet basement or near a  
swimming pool.  
Avoid using a telephone (other than a cordless type) during an electrical  
storm. There may be a remote risk of electric shock from lightning.  
Do not use the telephone to report a gas leak in the vicinity of the leak.  
Use only the power cord indicated in this manual.  
Replace only with the same or equivalent type battery recommended by  
the manufacturer.  
Dispose of used batteries according to the manufacturer's instructions.  
To reduce the risk of fire, use only No. 26 AWG or larger  
telecommunication line cord.  
Use only the battery pack that came with the computer or an optional  
battery pack. Use of the wrong battery could damage your computer.  
TOSHIBA assumes no liability for any damage in such case.  
EU Declaration of Conformity  
This product is carrying the CE-Mark in accordance with the related  
European Directives. The party responsible for CE-Marking is TOSHIBA  
Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany.  
The complete and official EU Declaration of Conformity can be found on  
TOSHIBA’s web site http://epps.toshiba-teg.com on the Internet.  
GOST  
User’s Manual  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
P200 Series  
Following information is only for EU-member states:  
The symbol indicates that this product may not be treated as  
household waste. Please ensure this product is properly  
disposed as inappropriate waste handling of this product may  
cause potential hazards to the environment and human health.  
For more detailed information about recycling of this product,  
please contact your local city office, your household waste  
disposal service or the shop where you purchased the product.  
This symbol may not stick depending on the country and region where you  
purchased.  
Optical Disc Drive Safety Instruction  
Be sure to check the international precautions at the end of this  
section.  
The optical drive that is used in this computer is equipped with a laser  
device. A classification label with the following sentence is affixed to the  
surface of the drive.  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1  
LUOKAN 1 LASERLAITE  
APPAREIL A LASER DE CLASSE 1  
KLASS 1 LASER APPARAT  
The drive with the above label is certified by the manufacturer that the drive  
complies with the requirement for laser product on the date of  
manufacturing pursuant to article 21 of Code of Federal Regulations by the  
United States of America, Department of Health & Human Services, Food  
and Drug Administration.  
In other countries, the drive is certified to comply with the requirement  
pursant to IEC 825 and EN60825 on class 1 laser product.  
This computer is equipped with one of the optical drive in the following list  
according to the model.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vi  
P200 Series  
Pioneer  
DVD Super Multi DVR-K17  
The DVD Super Multi drive employs a laser system. To ensure proper  
use of this product, please read this instruction manual carefully and  
retain for future reference. Should the unit ever require maintenance,  
contact an authorized service location.  
Use of controls, adjustments or the performance of procedures other  
than those specified may result in hazardous radiation exposure.  
To prevent direct exposure to the laser beam, do not try to open the  
enclosure.  
Location of the required label  
SERIAL NO.  
MANUFACTURED:  
COMPLIES WITH FDA RADIATION  
PERFORMANCE STANDARDS, 21 CFR  
SUBCHAPTER J.  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1  
PIONEER CORPORATION  
4-1, MEGURO 1-CHOME  
MEGURO-KU, TOKYO, 153-8654  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vii  
P200 Series  
TOSHIBA Samsung Storage Technology  
TS-L632D  
The drive employs a laser system. To ensure proper use of this  
product, please read this instruction manual carefully and retain for  
future reference. Should the unit ever require maintenance, contact an  
authorized service location.  
Use of controls, adjustments or the performance of procedures other  
than those specified may result in hazardous radiation exposure.  
To prevent direct exposure to the laser beam, do not try to open the  
enclosure.  
Location of the required label  
SERIAL NO.  
MANUFACTURED:  
COMPLIES WITH FDA RADIATION  
PERFORMANCE STANDARDS, 21 CFR  
SUBCHAPTER J.  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1  
TOSHIBA Samsung Storage Technology  
Korea Corporation  
416, Maetan-3Dong, Yeongtong-Gu, Suwon City,  
Gyeonggi-Do, 443-742, Korea  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
viii  
P200 Series  
Hitachi-LG Data Storage  
DVD Super Multi GSA-T20N  
The DVD Super Multi drive employs a laser system. To ensure proper  
use of this product, please read this instruction manual carefully and  
retain for future reference. Should the unit ever require maintenance,  
contact an authorized service location.  
Use of controls, adjustments or the performance of procedures other  
than those specified may result in hazardous radiation exposure.  
To prevent direct exposure to the laser beam, do not try to open the  
enclosure.  
Location of the required label  
SERIAL NO.  
MANUFACTURED:  
COMPLIES WITH FDA RADIATION  
PERFORMANCE STANDARDS, 21 CFR  
SUBCHAPTER J.  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1  
Hitachi-LG Data Storage, Inc.  
22-23, Kaigan 3-chome, Minato-ku,  
Yokyo, 108-0022 Japan  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ix  
P200 Series  
Panasonic  
DVD Super Multi UJ-850U  
The DVD Super Multi drive employs a laser system. To ensure proper  
use of this product, please read this instruction manual carefully and  
retain for future reference. Should the unit ever require maintenance,  
contact an authorized service location.  
Use of controls, adjustments or the performance of procedures other  
than those specified may result in hazardous radiation exposure.  
To prevent direct exposure to the laser beam, do not try to open the  
enclosure.  
Location of the required label  
SERIAL NO.  
MANUFACTURED:  
COMPLIES WITH FDA RADIATION  
PERFORMANCE STANDARDS, 21 CFR  
SUBCHAPTER J.  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1  
Panasonic Communications Co., Ltd.  
1-62, 4-Chome Minoshima, Hakata-Ku  
Fukuoka, Japan  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
x
P200 Series  
TEAC  
DV-W28EC  
The drive employs a laser system. To ensure proper use of this  
product, please read this instruction manual carefully and retain for  
future reference. Should the unit ever require maintenance, contact an  
authorized service location.  
Use of controls, adjustments or the performance of procedures other  
than those specified may result in hazardous radiation exposure.  
To prevent direct exposure to the laser beam, do not try to open the  
enclosure.  
Location of the required label  
SERIAL NO.  
MANUFACTURED:  
COMPLIES WITH FDA RADIATION  
PERFORMANCE STANDARDS, 21 CFR  
SUBCHAPTER J.  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1  
TEAC CORPORATION  
3-7-3 NAKA-CHO, MUSASHINO-SHI  
TOKYO, JAPAN  
User’s Manual  
xi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P200 Series  
TOSHIBA  
HD DVD-ROM TS-L802A  
The HD DVD-ROM drive employs a laser system. To ensure proper  
use of this product, please read this instruction manual carefully and  
retain for future reference. Should the unit ever require maintenance,  
contact an authorized service location.  
Use of controls, adjustments or the performance of procedures other  
than those specified may result in hazardous radiation exposure.  
To prevent direct exposure to the laser beam, do not try to open the  
enclosure.  
Location of the required label  
SERIAL NO.  
MANUFACTURED:  
COMPLIES WITH FDA RADIATION  
PERFORMANCE STANDARDS, 21 CFR  
SUBCHAPTER J.  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1  
TOSHIBA CORPORATION 1-1-1,  
SHIBAURA, MINATO-KU,  
TOKYO 105-8001, JAPAN  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xii  
P200 Series  
International Precautions  
CAUTION: This appliance contains a laser  
system and is classified as a "CLASS 1 LASER  
PRODUCT." To use this model properly, read the  
instruction manual carefully and keep this manual  
for your future reference. In case of any trouble  
with this model, please contact your nearest  
"AUTHORIZED service station." To prevent direct  
exposure to the laser beam, do not try to open the  
enclosure.  
CAUTION: USE OF CONTROLS OR  
ADJUSTMENTS OR PERFORMANCE OF  
PROCEDURES OTHER THAN THOSE  
SPECIFIED IN THE OWNER'S MANUAL MAY  
RESULT IN HAZARDOUS RADIATION  
EXPOSURE.  
Modem warning notice  
Conformity Statement  
The equipment has been approved to [Commission Decision "CTR21"] for  
pan- European single terminal connection to the Public Switched  
Telephone Network (PSTN).  
However, due to differences between the individual PSTNs provided in  
different countries/regions the approval does not, of itself, give an  
unconditional assurance of successful operation on every PSTN network  
termination point.  
In the event of problems, you should contact your equipment supplier in the  
first instance.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xiii  
P200 Series  
Network Compatibility Statement  
This product is designed to work with, and is compatible with the following  
networks. It has been tested to and found to confirm with the additional  
requirements conditional in EG 201 121.  
Germany  
ATAAB AN005, AN006, AN007, AN009, AN010  
and DE03, 04, 05, 08, 09, 12, 14, 17  
Greece  
ATAAB AN005, AN006 and GR01, 02, 03, 04  
Portugal  
ATAAB AN001, 005, 006, 007, 011 and P03, 04,  
08, 10  
Spain  
ATAAB AN005, 007, 012, and ES01  
ATAAB AN002  
Switzerland  
Norway  
ATAAB AN002, 005, 007 and NO 01, 02  
ATAAB AN003, 004  
All other countries/  
regions  
Specific switch settings or software setup are required for each network,  
please refer to the relevant sections of the user guide for more details.  
The hookflash (timed break register recall) function is subject to separate  
national type approvals. It has not been tested for conformity to national  
type regulations, and no guarantee of successful operation of that specific  
function on specific national networks can be given.  
Important Notice  
Copyrighted works including, but not limited to music, video, computer  
program, databases are protected by copyright laws. Unless specifically  
permitted under applicable copyright laws, you cannot copy, modify, assign,  
transmit or otherwise dispose of any copyrighted work with the consent of  
the owner of the copyright.  
Please take notice that unauthorized copying, modification, assignment,  
transmission and disposition may be subject to claims for damages and  
penalties.  
General Precautions  
TOSHIBA computers are designed to optimize safety, minimize strain and  
withstand the rigors of portability. However, certain precautions should be  
observed to further reduce the risk of personal injury or damage to the  
computer.  
Be certain to read the general precautions below and to note the cautions  
included in the text of the manual.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xiv  
P200 Series  
Creating a computer-friendly environment  
Place the computer on a flat surface that is large enough for the computer  
and any other items you are using, such as a printer.  
Leave enough space around the computer and other equipment to provide  
adequate ventilation. Otherwise, they may overheat.  
To keep your computer in prime operating condition, protect your work area  
from:  
Dust, moisture, and direct sunlight.  
Equipment that generates a strong electromagnetic field, such as  
stereo speakers (other than speakers that are connected to the  
computer) or speakerphones.  
Rapid changes in temperature or humidity and sources of temperature  
change such as air conditioner vents or heaters.  
Extreme heat, cold, or humidity.  
Liquids and corrosive chemicals.  
Stress injury  
Carefully read the Instruction Manual for Safety and Comfort. It contains  
information on the prevention of stress injuries to your hands and wrists  
that can be caused by extensive keyboard use. Chapter 3, Getting Started,  
also includes information on work space design, posture and lighting that  
can help reduce physical stress.  
Heat injury  
Avoid prolonged physical contact with the computer. If the computer is  
used for long periods, its surface can become very warm. While the  
temperature will not feel hot to the touch, if you maintain physical  
contact with the computer for a long time, for example if you rest the  
computer on your lap or if you keep your hands on the palm rest, your  
skin might suffer a low-heat injury.  
If the computer has been used for a long time, avoid direct contact with  
the metal plate supporting the various interface ports as this can  
become hot.  
The surface of the AC adaptor can become hot when in use but this  
condition does not indicate a malfunction. If you need to transport the  
AC adaptor, you should disconnect it and let it cool before moving it.  
Do not lay the AC adaptor on a material that is sensitive to heat as the  
material could become damaged.  
Pressure or impact damage  
Do not apply heavy pressure to the computer or subject it to any form of  
strong impact as this can damage the computer's components or otherwise  
cause it to malfunction.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xv  
P200 Series  
PC Card overheating  
Some PC Cards can become hot during prolonged use which may result in  
errors or instability in the operation of the device in question. In addition,  
you should also be careful when you remove a PC Card that has been  
used for a long time.  
Mobile phones  
Please be aware that the use of mobile phones can interfere with the audio  
system. The operation of the computer will not be impaired in any way, but  
it is recommended that a minimum distance of 30 cm is maintained  
between the computer and a mobile phone that is in use.  
Instruction Manual for Safety and Comfort  
All important information on the safe and proper use of this computer is  
described in the enclosed Instruction Manual for Safety and Comfort. Be  
sure to read it before using the computer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xvi  
P200 Series  
Chapter 1 P200 Series Features  
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12  
Chapter 2 The Grand Tour  
Chapter 3 Getting Started  
Connecting the AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1  
Opening the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3  
Turning on the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3  
Starting up for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4  
Turning off the power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4  
Restarting the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8  
System Recovery Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8  
Restoring the pre-installed software from the Product  
Recovery disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xvii  
Chapter 4 Operating Basics  
TV-Out & HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17  
Cleaning the computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18  
Chapter 5 About the HD DVD  
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1  
(depending on the model you purchased). . . . . . . . . . . . . . . . . . . . 5-18  
When Using Ulead DVD MovieFactory® for TOSHIBA . . . . . . . . . . 5-22  
Chapter 6 The Keyboard  
Typewriter keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1  
F1 … F12 function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2  
Soft keys: Fn key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2  
Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3  
Windows special keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4  
Number Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4  
Generating ASCII characters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xviii  
Battery types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3  
Replacing the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10  
TOSHIBA Password Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12  
Power-up modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13  
Panel power off/on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14  
System automatic Sleep/Hibernation . . . . . . . . . . . . . . . . . . . . . . . . 7-14  
Chapter 8 HW Setup  
Chapter 9 Optional Devices  
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11  
Remote Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-14  
Using the Remote Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16  
Installing/Removing batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18  
i.LINK (IEEE1394a) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-21  
Security lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-22  
Chapter 10 Troubleshooting  
Problem solving process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1  
Hardware and system checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3  
TOSHIBA support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-17  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xix  
Chapter 11 Disclaimers  
Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-2  
Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-3  
Copy Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4  
Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4  
LCD Brightness and Eye Strain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4  
Appendix A Specifications  
Appendix B Display Modes  
Appendix C AC Power Cord and Connectors  
Appendix D If your computer is stolen  
Glossary  
User’s Manual  
xx  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P200 Series  
Preface  
Congratulations on your purchase of the P200 Series computer. This  
powerful notebook computer provides excellent expansion capability,  
including multimedia devices, and it is designed to provide years of reliable,  
high-performance computing.  
This manual tells how to set up and begin using your P200 Series  
computer. It also provides detailed information on configuring your  
computer, basic operations and care, using optional devices and  
troubleshooting.  
If you are a new user of computers or if you're new to portable computing,  
first read over the P200 Series Features and The Grand Tour chapters to  
familiarize yourself with the computer's features, components and  
accessory devices. Then read Getting Started for step-by-step instructions  
on setting up your computer.  
If you are an experienced computer user, please continue reading the  
preface to learn how this manual is organized, then become acquainted  
with this manual by browsing through its pages. Be sure to look over the  
Special features section of the P200 Series Features, to learn about  
features that are unique to the computer.  
Manual contents  
This manual has eleven chapters, four appendixes and a glossary.  
Chapter 1, P200 Series Features, is an overview of the computer's special  
features, utilities, and options.  
Chapter 2, The Grand Tour, identifies the components of the computer and  
briefly explains how they function.  
Chapter 3, Getting Started, provides a quick overview of how to begin  
operating your computer and gives tips on safety and designing your work  
area. Be sure to read the sections on setting up the operating system and  
on restoring the pre-installed software.  
Chapter 4, Operating Basics, includes instructions on using the following  
devices: TouchPad/Dual Mode Pad, the optical disc drives, the internal  
modem, LAN and wireless LAN. It also provides tips on care of the  
computer, disks and DVD/CD-ROMs.  
Chapter 5, About the HD DVD, describes the features, use of HD DVD and  
HD DVD Media.  
Chapter 6, The Keyboard, describes special keyboard functions including  
hotkeys.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xxi  
P200 Series  
Chapter 7, Power and Power-Up Modes, gives details on the computer's  
power resources.  
Chapter 8, HW Setup, introduces you to the TOSHIBA Hardware Setup  
program.  
Chapter 9, Optional Devices, describes the optional hardware available.  
Chapter 10, Troubleshooting, provides helpful information on how to  
perform some diagnostic tests, and suggests courses of action if the  
computer doesn't seem to be working properly.  
Chapter 11, Disclaimers, provides disclaimer information related to your  
computer.  
The Appendices provide technical information about your computer.  
The Glossary defines general computer terminology and includes a list of  
acronyms used in the text.  
Conventions  
This manual uses the following formats to describe, identify, and highlight  
terms and operating procedures.  
Abbreviations  
On first appearance, and whenever necessary for clarity, abbreviations are  
enclosed in parentheses following their definition. For example: Read Only  
Memory (ROM). Acronyms are also defined in the Glossary.  
Icons  
Keys  
Icons identify ports, dials, and other parts of your computer. The indicator  
panel also uses icons to identify the components it is providing information  
on.  
The keyboard keys are used in the text to describe many computer  
operations. A distinctive typeface identifies the key top symbols as they  
appear on the keyboard. For example, Enter identifies the Enter key.  
Key operation  
Some operations require you to simultaneously use two or more keys. We  
identify such operations by the key top symbols separated by a plus sign  
(+). For example, Ctrl + C means you must hold down Ctrl and at the same  
time press C. If three keys are used, hold down the first two and at the  
same time press the third.  
DISKCOPY A: B:  
When procedures require an action such as  
clicking an icon or entering text, the icon's name  
or the text you are to type in is represented in the  
type face you see to the left.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xxii  
P200 Series  
Display  
Names of windows or icons or text generated by  
the computer that appears on its display screen is  
presented in the type face you see to the left.  
ABC  
Messages  
Messages are used in this manual to bring important information to your  
attention. Each type of message is identified as shown below.  
Pay attention! A caution informs you that improper use of equipment or  
failure to follow instructions may cause data loss or damage your  
equipment.  
Please read. A note is a hint or advice that helps you make best use of  
your equipment.  
Terminology  
This term is defined in this document as follows:  
Start  
The word "Start" refers to the  
Microsoft Windows Vista™.  
button in  
®
Equipment checklist  
Carefully unpack your computer. Save the box and packing materials for  
future use. Check to make sure you have all the following items:  
Hardware  
P200 Series Portable Personal Computer  
Universal AC Adapter and Power Cord  
USB Floppy Disk Drive (provided with some models)  
Modular cable for modem (provided with some models)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xxiii  
P200 Series  
Software  
®
Microsoft Windows Vista™ Home Basic/Home Premium/Business Edition/  
Ultimate Edition  
The following software which is pre-installed on your hard disk:  
®
Microsoft Windows Vista™ Home Basic/Home Premium/Business  
Edition/Ultimate Edition  
DVD Video Player  
TOSHIBA Disc Creator  
TOSHIBA ConfigFree  
TOSHIBA Assist  
TOSHIBA SD Memory Card Format*  
TOSHIBA HW Setup  
TOSHIBA Value Added Package Utility  
TOSHIBA Supervisor Password Utility  
®
Ulead DVD MovieFactory  
Online Manual  
Product Recovery disc (provided with some models)  
* The availability of this software is dependent on the model you  
purchased.  
The system may not function properly if you use drivers that are not pre-  
installed or distributed by TOSHIBA.  
SD Memory Card Format Utility and other SD functions are packaged into  
TOSHIBA SD Memoory Utilities. When uninstalling the SD utilities, click  
Start Control Panel Programs, and select TOSHIBA SD Memory  
Utilities.  
Documentation  
Your computer's documentation:  
P200 Series Personal Computer User's Manual  
P200 Series Quickstart  
®
Microsoft Windows Vista™ Quick Start Guide  
Warranty Information  
Instruction Manual for Safety and Comfort  
If any of the items are missing or damaged, contact your dealer  
immediately.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xxiv  
P200 Series Features  
Chapter 1  
P200 Series Features  
This chapter identifies the computer's special features, options and  
accessories.  
Some of the features described in this manual may not function properly if  
you use an operating system that was not pre-installed by TOSHIBA.  
Features  
Please visit your region's web site for the configuration details of the model  
that you have purchased.  
Processor  
®
Intel Core™ 2 Duo Processor  
Disclaimer (CPU)  
For more information on the Disclaimer regarding CPU, please refer to the  
Disclaimers section in Chapter 11.  
Chipset  
®
Mobile Intel PM965 Express Chipset  
TEXAS INSTRUMENTS CardReader &  
1394a Controller PCI8402  
Realtek High Definition Audio Codec ALC268  
Realtek 10M/100M/1Gbps LAN Controller  
RTL8111B, 10M/100M LAN Controller  
RTL8101E  
(Depending on the model you purchased)  
User’s Manual  
1-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
P200 Series Features  
Memory  
The graphics system in your computer may use part of the main system  
memory for graphics performance and therefore reduce the amount of  
system memory available for other computing activities. The amount of  
system memory allocated to support graphics may vary depending on the  
graphics system, applications utilized, system memory size and other  
factors.  
Slot  
Two DDRII SO-DIMM, up to 4 GB with Mobile  
Intel PM965 Express Chipset; can be upgraded  
®
through the memory expansion slot.  
You need to remove existing SO-DIMM if SO-DIMM  
is Maximum upgradable system memory size is  
depending on the system you purchased.  
L2 Cache  
Depending on the model you purchased.  
4 MB, 2 MB, or 1 MB L2 Cache  
Video RAM  
Depending on the model you purchased:  
ATI Mobility. Radeon™ HD2400, up to  
256 MB VRAM (GDDR2)  
ATI Mobility. Radeon™ HD2600, up to  
512 MB VRAM (GDDR2)  
BIOS  
1 MB Flash ROM for system BIOS  
Suspend to memory or hard disk drive  
Various Hotkey functions for system control  
Complete ACPI 1.0b functionality  
Power  
Battery Pack  
6-cell Lithium Ion smart battery pack with  
10.8 V*4000 mAh.  
Approximately 12 hours or longer charging time to  
100% battery capacity with system switched on.  
Approximately 4 hours charge time to 100%  
battery capacity with system switched off.  
Approximately 1.5 days discharging time in Sleep  
Mode for the 9-cell battery, 1 day for the 6-cell  
battery.  
Discharge time in shutdown mode is  
approximately 1 month.  
* The availability of this battery is dependent on  
the model you purchased.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-2  
P200 Series Features  
Disclaimer (Battery Life)  
For more information on the Disclaimer regarding Battery Life, please refer  
to the Disclaimers section in Chapter 11.  
RTC Battery  
The computer has an internal battery to back up  
its Real Time Clock (RTC), calender and setup  
information. This battery will last for an average of  
one month with no external power source.  
AC adapter  
The universal AC adapter provides power to the  
system and recharges the batteries when they  
are low. It comes with a detachable power cord.  
Floppy Disk Drive devices  
External USB Floppy Disk Drive (depends on the  
model purchased).  
TouchPad  
The TouchPad control buttons in the palm rest  
enable control of the on-screen pointer.  
The volume control on the right side of the TouchPad and print button may  
not function with some applications.  
Display  
17" TFT screen with a resolution of  
1440 horizontal × 900 vertical pixels.  
Disclaimer (LCD)  
For more information on the Disclaimer regarding LCD, please refer to the  
Disclaimers section in Chapter 11.  
Graphics controller  
ATI Mobility. Radeon™ HD2400/HD2600  
(Graphics controller chipset depends on the  
model purchased)  
The graphics controller maximizes display  
performance. Refer to Display Modes section in  
Appendix B for more information.  
Disclaimer (Graphics Processor Unit ("GPU")  
For more information on the Disclaimer regarding Graphic Processor Unit  
("GPU"), please refer to the Disclaimers section in Chapter 11.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-3  
P200 Series Features  
Disks  
Fixed hard disk  
9.5 mm 2.5" hard disk drive  
(60/80/100/120/160/200 GB)  
12.5 mm 2.5" hard disk drive  
(160/200/250/300 GB)  
Serial ATA 2.5 Gb/s  
Disclaimer (HDD Drive Capacity)  
For more information on the Disclaimer regarding HDD Drive Capacity,  
please refer to the Disclaimers section in Chapter 11.  
DVD Super Multi drive Some models are equipped with a full-size DVD  
supporting R Double Super Multi drive supporting ±R Double Layer  
Layer  
module with dual layer support that lets you  
record data to rewritable CD/DVDs as well as run  
either 12 cm (4.72") or 8 cm (3.15") CD/DVDs  
without using an adapter. It reads DVD-ROMs at  
maximum 8x speed and CD-ROMs at maximum  
24x speed. It writes CD-Rs at up to 24x speed,  
CD-RWs at up to 16x speed, DVD-Rs at  
maximum 8x speed, DVD-RWs at maximum  
6x speed, DVD+RWs at maximum 8x speed,  
DVD+Rs at maximum 8x speed, DVD+R (double  
layer) at maximum 4x speed, DVD-R (dual layer)  
at maximum 4x speed and DVD-RAM at  
maximum 5x speed. This drive supports the  
following:  
DVD-ROM  
DVD-R  
DVD-Video  
DVD-RW  
DVD+R  
DVD+RW  
DVD-RAM  
CD-R  
DVD+R (double layer)  
CD-RW  
CD-DA  
CD-Text  
DVD-R (dual layer)  
Photo CD (single/multi-session)  
CD-ROM Mode1, Mode2  
CD-ROM XA Mode2 (Form1, Form2)  
Enhanced CD (CD-EXTRA)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-4  
P200 Series Features  
HD DVD-ROM drive  
HD DVD-ROM reads HD DVD-ROMs at  
maximum 1x speed DVD-ROMs at maximum  
8x speed and CD-ROMs at maximum 24x speed.  
It writes CD-Rs at up to 16x speed, CD-RWs at up  
to 10x speed, DVD-Rs at maximum 4x speed,  
DVD-RWs at maximum 6x speed, DVD+RWs at  
maximum 4x speed, DVD+Rs at maximum  
4x speed, DVD+R (double layer) at maximum  
2.4x speed, DVD-R (dual layer) at maximum  
2x speed and DVD-RAM at maximum 3x speed.  
This drive supports the following:  
HD DVD-ROM  
DVD-R  
DVD-ROM  
DVD-RW  
DVD+RW  
DVD-Video  
CD-RW  
DVD+R  
DVD-RAM  
CD-R  
CD-DA  
CD-Text  
DVD+R (double layer)  
Photo CD (single/multi-session)  
CD-ROM Mode1, Mode2  
CD-ROM XA Mode2 (Form1, Form2)  
Enhanced CD (CD-EXTRA)  
Computers in this series can be configured with multiple types of optical  
disc drive. For more information on the optical disc drives available, talk to  
your dealer. More information on using the optical disc drive can be found  
in Chapter 4, Operating Basics.  
Slots (depending on configuration)  
Multiple Digital Media This slot lets you easily transfer data from  
Card (SD/SDHC/MMC/ devices, such as digital cameras and Personal  
MS/MS Pro/xD)  
Digital Assistants, that use flash-memory.  
You can use a memory module in this slot.  
Express Card  
The Express Card expansion slot that can  
accommodate two standard module formats; an  
Express Card/34 module and an Express Card/  
54 module. An Express Card module is a small  
addin card technology based on the PCI Express  
and Universal Serial Bus (USB) interfaces.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-5  
P200 Series Features  
Ports (depending on configuration)  
External monitor  
15-pin analog VGA port supports VESA DDC2B  
compatible functions.  
Universal Serial Bus The computer has Six Universal Serial Bus (USB)  
ports that comply with the USB 2.0 standard,  
which enables data transfer speeds more than  
40 times faster than USB 1.1 (which this  
computer also supports).  
i.LINK (IEEE1394a)  
TV Out  
This port enables high-speed data transfer  
directly from external devices such as digital  
video cameras.  
The 4-pin S-Video port is compatible with PAL or  
NTSC TV standard, supporting Macrovision 7.02  
copy protection.  
HDMI  
High Definition Multimedia Interface allows the  
connection of other High Definition Devices such  
as Televisions and DVD Players.  
Multimedia  
®
Sound system  
The integrated Windows compatible sound  
system provides support for internal speakers as  
well as jacks for an external microphone and  
headphones.  
Line In Jack  
S/PDIF Jack  
Insert standard 3.5 mm jack to listen to audio.  
Insert standard 3.5 mm jack to listen to audio  
onspeakers or other external devices.  
Headphone jack  
Microphone jack  
Web Camera  
A standard 3.5 mm stereo jack is provided for the  
connection of external headphones or speakers.  
A standard 3.5 mm mini microphone jack enables  
connection of monaural microphone input.  
Record/Send still or video images with this  
integrated Web Camera.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-6  
P200 Series Features  
Communications (depending on configuration)  
Modem  
An internal modem provides capability for data  
and fax communication. It supports the V.90 or  
V.92 standards depending on the region and  
provides a modem jack for connection to a  
telephone line. The speed of data and fax transfer  
depends on the analog telephone line conditions.  
LAN  
The computer has built-in support for Ethernet  
LAN (10 Mbps, 10BASE-T) and Fast Ethernet  
LAN (100 Mbps 100BASE-TX).  
Wireless LAN  
The computer has a built-in wireless LAN mini-  
PCI card that is compatible with other LAN  
systems that support the following: 802.11a/b/g/n  
wireless LAN module/ 802.11a/b/g wireless LAN  
module/ 802.11b/g wireless LAN module. It has a  
Frequency Channel Selection (2.4 or 5 GHz) and  
allows roaming over multiple channels.  
Bluetooth  
Bluetooth is a short-range wireless technology  
used to create PANs (Personal Area Networks)  
among your devices, and with other nearby  
devices like mobile computers, mobile phones,  
and digital cameras.  
Security  
Power-on password protection.  
Two level password architecture.  
Security Lock Slot  
Receives an optional security lock in order to  
anchor the computer to a desk or other large,  
heavy object.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-7  
P200 Series Features  
Special features  
The following features are either unique to TOSHIBA computers or are  
advanced features, which make the computer more convenient to use.  
Hotkeys  
Key combinations that let you quickly modify the  
system configuration directly from the keyboard  
without running a system configuration program.  
Display Automatic  
Power off  
This feature automatically cuts off power to the  
internal display when there is no input from the  
keyboard or pointing device for a specified time  
period. Power is restored when any key is  
pressed or when there is input from a pointing  
device. You can specify the time period in the  
TOSHIBA Power Saver utility.  
Hard Disk Drive  
This feature automatically cuts off power to the  
Automatic Power Off hard disk drive when it is not accessed for a  
specified time period. Power is restored when the  
hard disk is accessed. You can specify the time  
period in the TOSHIBA Power Saver utility.  
System Automatic  
Sleep/Hibernation  
This feature automatically places the system into  
either Sleep Mode or Hibernation Mode when  
there is no input or hardware access for a  
specified time period. You can specify the time  
period and select either System Sleep or System  
Hibernate in the TOSHIBA Power Saver utility.  
Power-on Password Two levels of password security are available,  
Supervisor and User, which can prevent  
unauthorized access to your computer.  
Battery Save Mode  
Instant Security  
This feature lets you save battery power. You can  
specify the level of system power management in  
the TOSHIBA Power Saver utility.  
A Hotkey function which blanks the screen and  
activates password security to provide quick and  
easy data security.  
Panel Power Off/On  
This feature turns power to the computer off when  
the display panel is closed and turns it back on  
when the panel is opened. You can specify the  
setting in the TOSHIBA Power Saver utility.  
Low Battery  
Automatic  
Hibernation  
When battery power is exhausted to the point that  
computer operation cannot be continued, the  
system automatically enters Hibernation Mode  
and shuts itself down. You can specify the setting  
in the TOSHIBA Power Saver utility.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-8  
   
P200 Series Features  
Hibernation  
This feature lets you turn off the power without  
exiting from your software. The contents of main  
memory are saved to the hard disk. When you  
turn on the power again, you can continue  
working right where you left off. Refer to the  
Turning off the power section in Chapter 3,  
Getting Started, for details.  
Sleep  
In Sleep Mode, power to the system remains on,  
but the processor and all other devices are  
effectively in 'sleep mode'. When the computer is  
in Sleep Mode, the Power LED flashes amber.  
The computer enters Sleep Mode regardless of  
the Hibernate Mode setting. Refer to the Turning  
off the power section in Chapter 3, Getting  
Started, for details.  
Before entering Sleep mode, be sure to save your data.  
Do not install or remove a memory module while the computer is in  
Sleep mode. The computer or the module could be damaged.  
Do not remove the battery pack while the computer is in Sleep mode.  
Data in memory will be lost.  
TOSHIBA Value Added Package  
This section describes the TOSHIBA Component features pre-installed on  
the computer.  
TOSHIBA Power  
Saver  
TOSHIBA Power Saver provides you with the  
features of more various power supply  
managements.  
TOSHIBA Button  
Support  
This utility controls the buttom operation of the  
computer. The starting application from the  
buttom can be changed.  
TOSHIBA PC  
Diagnostic Tool  
The TOSHIBA PC Diagnostic Tool will display  
basic system configuration information and allow  
the functionality of some of the computer’s builtin  
hardware devices to be tested.  
TOSHIBA Flash Cards The TOSHIBA Flash Cards provide a quick way  
to modify selected system functions and to launch  
applications.  
Hot key function  
TOSHIBA utility launcher function  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-9  
 
P200 Series Features  
When you start or resume your computer, the TOSHIBA Flash Cards may  
take a moment to become available and may display several times before  
completely activating. The hot key functions will be available once the  
TOSHIBA Cards are completely active.  
If your system is busy and you see a "Not Responding" message, allow  
TOSHIBA Cards to completely activate before you continue to use the  
utility and hot keys.  
TOSHIBA  
Components  
Common Driver  
TOSHIBA Components Common Driver contains  
the module required for the utility which TOSHIBA  
offers.  
TOSHIBA  
Accessibility  
The TOSHIBA Accessibility utility provides  
support to movement impaireed users when they  
need to use the TOSHIBA Hot-key functions. In  
use, the utility allows you to make the Fn key  
‘sticky’, that is you can press it once, release it,  
and they press one of the "F" keys in order to  
access its specific function. When set, the Fn key  
will remain active until another key is pressed.  
TOSHIBA Zooming  
Utility  
This utility allows you to enlarge or reduce the  
icon size on Windows Desktop or the zoom factor  
associated with specific supported applications.  
Utilities and Applications  
This section describes preinstalled utilities and tells how to start them. For  
details on operations, refer to each utility’s online manual, help files or  
readme.txt files.  
TOSHIBA Assist  
TOSHIBA Assist is a graphical user interface that  
provides easy access to help and services.  
DVD Video Player  
The DVD player is used to play DVD Video media  
through an on-screen interface and functions.  
Frame dropping, audio skipping or out of synch audio and video may occur  
during playback of some DVD Video titles. Make sure to connect the  
computer’s AC adaptor when playing a DVD Video. Power-saving features  
may interfere with smooth playback.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-10  
 
P200 Series Features  
TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy  
control of communication devices and network  
connections. ConfigFree also allows you to find  
communication problems and create profiles for  
easy switching between location and  
communication networks.  
To start ConfigFree, click Start ꢀ  
All Programs TOSHIBA Networking ꢀ  
ConfigFree.  
TOSHIBA Disc  
Creator  
You can create discs in several formats including  
audio CDs that can be played on a standard  
stereo CD player and data discs to store the files  
and folders on your hard disk drive. This software  
can be used on a model with a CD-RW/  
DVD-ROM drive, DVD Super Multi drive, or  
HD DVD drive.  
TOSHIBA Hardware  
Setup  
This program lets you customize your hardware  
settings according to the way you work with your  
computer and the peripherals you use. To access  
this utility, click Start Button All Programs ꢀ  
TOSHIBA Utilities HWsetup.  
CD/DVD Drive  
Acoustic Silencer  
This utility allows you to configure the read speed  
of CD drive. You can either configure Normal  
Mode, which operates the drive at its maximum  
speed for quick data access, or Quiet Mode,  
whcih runs at single speed for CD audio and  
which can lessen operational noise. It is  
ineffective in DVD.  
Ulead DVD  
MovieFactory for  
You can edit digital video and make a DVD-Video  
and support Labelflash™ function.  
®
TOSHIBA  
The availability of Labelflashfunction depends on the model you  
purchased.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-11  
P200 Series Features  
Windows Mobility  
Center  
Mobility Center is a utility for accessing several  
mobile PC settings quickly in one window. A  
default maximum of eight tiles are provided by the  
operating system, and the additional two titles are  
added to your Mobility Center  
Lock Computer:  
This can be used to lock your computer  
without turning it off. This has the same  
function as the Lock button at the bottom of  
the right pane in the start menu.  
TOSHIBA Assist:  
This can be used to open TOSHIBA Assist if  
it is already installed in your computer.  
Options  
You can add a number of options to make your computer even more  
powerful and convenient to use. The following options are available:  
Memory Modules  
Two memory module can be installed in this  
computer.  
Use only PC5300* compatible DDRII memory modules. See your  
TOSHIBA dealer for details.  
* The availability of DDRII is dependent on the model you purchased.  
Battery Pack  
An additional battery pack can be purchased from  
your TOSHIBA dealer. Use it as a spare to  
increase your computer operating time.  
High capacity battery An additional battery pack can be purchased from  
pack  
your TOSHIBA dealer. Use it as a spare to  
increase your computer operating time.  
AC adapter  
If you use your computer at more than one site  
frequently, it may be convenient to purchase an  
additional AC adapter for each site so you will not  
have to carry the adapter with you.  
USB Floppy Disk  
Drive  
Lets you attach a floppy disk drive to your  
computer by means of a USB cable.  
User’s Manual  
1-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Grand Tour  
Chapter 2  
The Grand Tour  
This chapter identifies the various components of your computer. Become  
familiar with each component before you operate the computer.  
Certain types of notebook chassis are designed to accommodate all  
possible configurations for an entire product series. Your selected model  
may not have all the features and specifications corresponding to all of the  
icons or switches shown on the notebook chassis, unless you have  
selected all those features.  
Front with the display closed  
The following figure shows the computer front with its display panel in the  
closed position.  
1
2
3
4
5
6
11 12  
7
8
9
10  
13  
1. Front Edge Logo*  
2. DC IN LED  
3. Power LED  
8. Line In Jack  
9. Microphone Jack  
10. S/PDIF Jack  
4. Battery LED  
5. Hard Disk Drive LED  
11. Headphone Jack  
12. Volume Control  
6. Multiple Digital Media Card Slot  
13. Multiple Digital Media Card Slot*  
Access LED*  
7. Wireless Communication Switch  
and LED*  
* The availability of this feature is dependent on the model you purchased.  
Front of the computer with display closed  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-1  
       
The Grand Tour  
Front Edge Logo*  
Front Edge Logo indicates the computer series  
you bought.  
(The avaliability of this function is dependent on  
the model you purchased.)  
DC IN LED  
Power LED  
The DC IN LED indicates the computer is  
connected to the AC adapter and it is plugged into  
an AC power source.  
In normal operating mode, the Power LED is blue  
(depending on the model you purchased). If the  
system is in SleepSleep Mode the LED will flash  
amber, while the LED will be off when the  
computer is turned off or is in Hibernation Mode.  
Battery LED  
The Battery LED indicates the battery's current  
charge/discharge status. It lights blue (depending  
on the model you purchased) when the battery is  
fully charged. It lights amber while the battery is  
being charged from the AC adapter. It flashes  
amber when the battery capacity is low.  
Hard Disk Drive LED The Hard Disk Drive LED indicates that the hard  
disk drive is being accessed. Every time your  
computer runs a program, opens a file, or  
performs some other function in which it must  
access the hard disk drive, this light will go on.  
Multiple Digital Media The Multiple Digital Media Card Slot Access LED  
Card Slot Access  
LED*  
lights up when the Multiple Digital Media Card is  
accessed.  
(The avaliability of this function is dependent on  
the model you purchased.)  
Wireless  
Communication  
Switch and LED*  
The wireless communication switch turns on the  
wireless networking transceiver. The Wireless  
Communication LED beside it indicates that  
wireless networking is turned on. Indicates  
whether the Wireless devices is active or not.  
(The avaliability of this function is dependent on  
the model you purchased.)  
Line In Jack  
Insert standard 3.5 mm jack to listen to audio.  
Microphone Jack  
The standard 3.5 mm mini microphone jack  
enables connection of a three conductive type  
mini-jack for a monaural microphone.  
S/PDIF Jack  
Insert standard 3.5 mm jack to listen to audio on  
speakers or other external devices.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-2  
The Grand Tour  
Headphone Jack  
Volume Control  
The headphone jack lets you connect stereo  
headphones or other audio-output devices such  
as external speakers. Connecting headphones or  
other devices to this jack automatically disables  
the internal speakers.  
Use this dial to adjust the volume of the stereo  
speakers or headphones.  
Multiple Digital Media The Multiple Digital Media Card Slot allows you to  
Card Slot*  
use media cards from digital still cameras and  
various forms of portable information equipment.  
(The availability of this function depends on the  
model you purchased.)  
Right side  
The following figure shows the computer's right side.  
1
2
3
4
5
1. Universal Serial Bus (USB) Port  
2. Modem Jack  
4
5
Fan Vents*  
Security Lock  
3. Optical Disc Drive and LED  
* The availability of this feature is dependent on the model you purchased.  
The right side of the computer  
Universal Serial Bus The Universal Serial Bus (USB 2.0 and  
(USB) Port  
1.1 compatible) port enables USB-equipped  
devices such as keyboards, mice, hard drives,  
scanners, and printers to be connected to the  
computer.  
Modem Jack  
In regions where an internal modem is installed  
as standard equipment, this jack lets you use a  
modular cable to connect the modem directly to a  
telephone line.  
User’s Manual  
2-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Grand Tour  
Optical Disc Drive and The computer is configured with a full-size optical  
LED  
disc drive module that lets you run either 12 cm  
(4.72") or 8 cm (3.15") discs without using an  
adapter. See the Drives section in this chapter for  
technical specifications on each drive and  
Chapter 4, Operating Basics, for information on  
using the drive and caring for discs.The LED lets  
you know when the Optical Disc Drive is being  
accessed.  
Fan Vents*  
The fan vents help prevent the GPU from  
overheating.  
(The avaliability of this function is dependent on  
the model you purchased.)  
To prevent possible over heating of the GPU, never block the fan vents.  
Security Lock  
An optional security cable attaches to this port in  
order to anchor your computer to a desk or other  
large object to deter theft.  
Left side  
The following figure shows the computer's left side.  
7
1
2
3
4
5
6
8
9
1. DC IN 19V Jack  
2. RGB Monitor Port  
3. Fan Vents  
6. TV Out Port  
7. HDMI Port  
8. i.LINK (IEEE1394a) Port*  
9. Express Card Slot  
4. Lan Jack  
5. Universal Serial Bus (USB) Port  
* The availability of this feature is dependent on the model you purchased.  
The left side of the computer  
DC IN 19V Jack  
RGB Monitor Port  
Fan Vents  
The DC IN jack is where you plug in the AC  
adapter.  
This 15-pin port lets you connect an external  
video display to the computer.  
The fan vents help prevent the CPU from  
overheating.  
User’s Manual  
2-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Grand Tour  
To prevent possible over heating of the CPU, never block the fan vents.  
LAN Jack  
This jack lets you connect to a LAN. The adapter  
has built-in support for Ethernet LAN  
(10 megabits per second, 10BASE-T), Fast  
Ethernet LAN (100 megabits per second,  
100BASE-TX) and Gigabit Ethernet LAN  
(1000 megabits per second, 1000BASE-T).  
Two indicators built into the jack let you see the  
LAN status.  
Universal Serial Bus The Universal Serial Bus (USB 2.0 and  
(USB) Port  
1.1 compatible) port enables USB-equipped  
devices such as keyboards, mice, hard drives,  
scanners, and printers to be connected to the  
computer.  
TV Out Port  
HDMI Port  
Connect a 4-pin S- video cable into this connector  
in order to output either an NTSC or PAL  
television signal.  
This port allows you to connect an HDMI device  
such as a Televison.  
i.LINK (IEEE1394a)  
Port  
This port allows you to connect an external  
device, such as a digital video camera, for high-  
speed data transfer.  
Express Card Slot  
This slot allows you to insert an Express Card. An  
Express Card module is a small, modular add-in  
card technology based on PCI Express and  
Universal Serial Bus (USB) interface. The max.  
transmission rate at 2.5 Gbps. Both 34 mm type  
and 54 mm type are supported.  
Back side  
The following figure shows the computer's back side.  
The back side of the computer  
User’s Manual  
2-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Grand Tour  
Underside  
The following figure shows the underside of the computer. Make sure the  
display is closed before turning over your computer.  
6
5
4
3
2
7
8
9
1
1. Battery Pack  
2. Fan Vent  
3. Battery Pack Lock  
4. Subwoofer  
5. HDD1  
6. HDD2*  
7. Expansion Memory Socket  
8. Fan Vent  
9. Battery Pack Latch  
* The availability of this feature is dependent on the model you purchased.  
The bottom of the computer  
Battery Pack  
The battery pack powers the computer when the  
AC adapter is not connected. For detailed  
information on the battery pack, refer to  
Chapter 7, Power and Power-Up Modes.  
Fan VentS  
The fan vents help prevent the CPU from  
overheating.  
Battery Pack Lock  
When you slide this into its locked position, the  
battery pack cannot be released even if you  
attempt to slide the battery pack latch into its open  
position.  
Subwoofer  
A subwoofer dedicate to the reproduction of bass  
frequencies.  
HDD1  
Hard Disk Drives store data, files and programs.  
Hard Disk Drives store data, files and programs.  
HDD2*  
(The availability of this function depends on the  
model you purchased.)  
User’s Manual  
2-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Grand Tour  
Expansion Memory  
Socket  
Use this socket to install a memory module to  
increase your computer's memory. Refer to the  
Memory expansion section in Chapter 9, Optional  
Devices.  
To prevent possible overheating of the CPU, never block the fan vents.  
Battery Pack Latch  
With the Battery Pack Lock in its unlocked  
position, you can slide this latch in order to  
remove the battery pack.  
Front with the display open  
The following figure shows the front of the computer with the display open.  
To open the display, slide the latch on the front of the display and lift it up.  
Position the display at a comfortable viewing angle.  
13  
14  
5
6
1
2
7
8
9
10  
11  
12  
3
4
1. Display Screen  
9. Stop*  
2. Left and Right Speakers  
3. TouchPad  
4. TouchPad Control Buttons  
5. Power Button  
10. Previous Button*  
11. Next Button*  
12. Number Pad  
13. Web Camera*  
14. Microphone*  
6. Internet Button*  
7. CD/DVD Button*  
8. Play/Pause Button*  
* The availability of this feature is dependent on the model you purchased.  
The front with the display open  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-7  
 
The Grand Tour  
Display Screen  
The LCD displays high-contrast text and graphics  
at a resolution up to 1440 × 900 pixels. Refer to  
Appendix B - Display Modes for further  
information. When the computer operates from  
the AC adapter, the display screen's image will be  
somewhat brighter than when it operates on  
battery power - this is normal and is designed to  
conserve battery power.  
To prolong the life of your display screen, use a screen saver when you're  
not using the computer and it is idle.  
Left and Right  
Speakers  
The computer provides two speakers for stereo  
sound reproduction.  
TouchPad  
The TouchPad pointing device is located in the  
centre of the palm rest and is used to control the  
on-screen pointer.  
TouchPad Control  
Buttons  
Control buttons below the TouchPad let you  
select menu items or manipulate text and  
graphics designated by the on-screen pointer.  
Power Button  
Press the power button to turn the computer's  
power on and off. There is an LED inside the  
power button which shines in blue (depending on  
the model you purchased) when the system is on.  
Internet Button*  
Press this button to launch an Internet browser.If  
the computer’s power is off, you can press this  
button to turn on the computer’s power and  
launch the browser automatically in one step.  
(The availability of this function depends on the  
model you purchased.)  
CD/DVD Button*  
Pressing this button will launch an application  
program that allows for watching CD/DVD.  
An application that is launched differs by a model:  
Windows Media Player/DVD Video Player.  
(The availability of this function depends on the  
model you purchased.)  
Play/Pause Button*  
Press this button to begin playing an audio CD, a  
DVD movie or digital audio files. This button also  
acts as a Pause button.  
(The availability of this function depends on the  
model you purchased.)  
Stop*  
Stops playing the CD, DVD or digital audio.  
(The availability of this function depends on the  
model you purchased.)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-8  
The Grand Tour  
Previous Button*  
Next Button*  
Skips backwards to the previous track, chapter or  
digital file. Refer to Chapter 4, Operating Basics,  
for details.  
(The availability of this function depends on the  
model you purchased.)  
Skips forward to the next track, chapter or digital  
file. Refer to Chapter 4, Operating Basics, for  
details.  
(The availability of this function depends on the  
model you purchased.)  
®
If Random or Shuffle is selected in Windows Media Player, selecting Next  
or Previous advances to a random selection.  
Number Pad  
Press the Number Lock button to activate the  
number pad. Use the number pad instead of the  
number buttons on the keyboard to enter  
numbers and ASCII codes.  
Web Camera*  
Take your picture or send your image to web  
contacts.  
(The availability of this function depends on the  
model you purchased.)  
Microphone*  
The Microphone is used with the Web Camera to  
talk to other Web Camera users and to record  
messages on windows media.  
(The availability of this function depends on the  
model you purchased.)  
Keyboard Indicators  
CAPS  
LOCK  
Numeric  
Mode  
Caps Lock  
Numeric Mode  
You can use the numeric pad for numeric input  
when the Numeric mode icon lights green. Refer  
to the Number Pad section in Chapter 6, The  
Keyboard.  
Caps Lock  
The Caps Lock LED lights when you press the  
Caps Lock key. When this light is on, pressing a  
letter key on the keyboard produces an  
uppercase (capital) letter.  
CAPS  
LOCK  
User’s Manual  
2-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Grand Tour  
Optical Disc drive  
The computer will have a single layer or dual layer DVD Super Multi drive  
or HD DVD drive supporting ±R Double Layer depending on its  
configuration. An ATAPI interface controller is used for the operation of  
these optical drives. When the computer is accessing a disc, an indicator  
on the drive glows.  
Region codes for DVD drives and media  
The disc drive and its media are manufactured according to the  
specifications of six marketing regions. When you purchase DVD-Video,  
make sure it matches your drive, otherwise it will not play properly.  
Code  
Code  
1
2
3
4
Canada, United States  
Japan, Europe, South Africa, Middle East  
Southeast Asia, East Asia  
Australia, New Zealand, Pacific Islands, Central  
America, South America, Caribbean  
5
6
Russia, Indian Subcontinent, Africa, North Korea,  
Mongolia  
China  
Writable discs  
This section describes the types of writable discs. Check the specifications  
for your drive to for the type of discs it can write. Use TOSHIBA Disc  
Creator to write compact discs. Refer to Chapter 4, Operating Basics.  
CDs  
CD-R discs can be written only once. The recorded data cannot be  
erased or changed.  
CD-RW discs can be recorded more than once. Use either 1x, 2x, or  
4x multi-speed CD-RW discs or high-speed 4x to 10x discs. The write  
speed of ultra-speed CD-RW discs is a maximum of 24x speed.  
DVDs  
DVD-R and DVD+R discs can be written only once. The recorded data  
cannot be erased or changed.  
DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than  
once.  
User’s Manual  
2-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Grand Tour  
DVD Super Multi drive supporting ±R Double Layer  
The full-size DVD Super Multi drive supporting ±R Double Layer module  
lets you record data to rewritable discs as well as run either 12 cm (4.72")  
or 8 cm (3.15") discs without using an adapter.  
The read speed is slower at the centre of a disc and faster at the outer  
edge.  
DVD read  
8 speed (maximum)  
DVD-R write  
DVD-RW write  
DVD+R write  
DVD+RW write  
DVD-RAM write  
CD read  
8 speed (maximum)  
6 speed (maximum)  
8 speed (maximum)  
8 speed (maximum)  
5 speed (maximum)  
24 speed (maximum)  
24 speed (maximum)  
16 speed (maximum, Ultra-speed media)  
4 speed (maximum)  
CD-R write  
CD-RW write  
DVD+R (DL) write  
DVD-R (DL) write  
4 speed (maximum)  
This drive cannot use discs that allow writing faster than 8x speed or faster  
(DVD-R and DVD+R with Single Layer), 6x speed or faster (DVD-RW),  
8x speed or faster (DVD+RW), 5x speed (DVD-RAM) or ultra-speed or  
faster (CD-RW).  
HD DVD-ROM drive  
The HD DVD-ROM supporting ±R Double Layer module lets you record  
data to rewritable discs as well as run either 12 cm (4.72") or 8 cm (3.15")  
discs without using an adapter.  
The read speed is slower at the centre of a disc and faster at the outer  
edge.  
HD DVD read  
DVD read  
1 speed (maximum)  
8 speed (maximum)  
DVD-R write  
DVD-RW write  
DVD+R write  
DVD+RW write  
DVD-RAM write  
CD read  
4 speed (maximum)  
4 speed (maximum)  
4 speed (maximum)  
4 speed (maximum)  
3 speed (maximum)  
24 speed (maximum)  
16 speed (maximum, Ultra-speed media)  
CD-R write  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-11  
   
The Grand Tour  
CD-RW write  
10 speed (maximum)  
2.4 speed (maximum)  
2 speed (maximum)  
DVD+R (DL) write  
DVD-R (DL) write  
This drive cannot use discs that allow writing faster than 4x speed or faster  
(DVD-R and DVD+R with Single Layer), 4x speed or faster (DVD-RW and  
DVD+RW), 3x speed (DVD-RAM) or ultra-speed or faster (CD-RW).  
AC adapter  
The AC adapter converts AC power to DC power and reduces the voltage  
supplied to the computer. It can automatically adjust to any voltage from  
100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to  
use the computer in almost any country/region.  
To recharge the battery, simply connect the AC adapter to a power source  
and the computer. See Chapter 7, Power and Power-Up Modes, for details.  
The AC adapter  
Use of the wrong adapter could damage your computer. TOSHIBA  
assumes no liability for any damage in such case. The output rating for the  
computer is 19 volts DC.  
Please use only the AC Adapter supplied with the computer or an AC  
adapter certified by TOSHIBA.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-12  
Getting Started  
Chapter 3  
Getting Started  
This chapter provides basic information to get you started using your  
computer. It covers the following topics:  
Be sure also to read Instruction Manual for Safety & Comfort. This guide,  
which is included with the computer, explains product liability.  
Connecting the AC adapter  
Opening the display  
Turning on the power  
Starting up for the first time  
Turning off the power  
Restarting the computer  
Restoring the pre-installed software from the Product Recovery media.  
All users should be sure to carefully read the section Starting up for the first  
time, which describes the actions to take when you turn on the power for  
the first time.  
Connecting the AC adapter  
Attach the AC adapter when you need to charge the battery or you want to  
operate from AC power. It is also the fastest way to get started, because  
the battery pack will need to be charged before you can operate from  
battery power. The AC adapter can be connected to any power source  
supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the  
AC adapter to charge the battery pack, refer to Chapter 7, Power and  
Power-Up Modes.  
Use of the wrong adapter could damage your computer. TOSHIBA  
assumes no liability for any damage in such case. The output rating for the  
computer is 19 volts DC.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-1  
       
Getting Started  
1. Connect the power cord to the AC adapter.  
Connecting the power cord to the AC adapter  
2. Connect the DC output plug on the AC adapter to the DC IN input port  
on the back of the computer.  
Connecting the adapter to the computer  
3. Plug the power cord into a live wall outlet. The Battery and DC IN  
indicators on the front of the computer should glow.  
To disconnect AC adaptor, you can follow the reversed procedure of  
Connecting AC adaptor. Please hold the DC output plug portion by your  
fingers and then plug it out when you disconnect the DC output plug.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-2  
Getting Started  
Opening the display  
The display panel can be rotated in a wide range of angles for optimal  
viewing.  
1. Slide the display latch on the front of the computer.  
Opening the display  
2. Lift the panel up and adjust it to the best viewing angle for you.  
Use reasonable care when opening and closing the display panel. Opening  
it vigorously or slamming it shut could damage the computer.  
Turning on the power  
This section describes how to turn on the power.  
After you turn on the power for the first time, do not turn it off until you have  
set up the operating system. Refer to the section Starting up for the first  
time in this chapter.  
1. If a USB floppy disk drive is connected, make sure the drive is empty - if a  
disk is in the drive, press the eject button to remove it.  
2. Open the display panel.  
3. Press the computer's power button and then release it.  
Turning on the power  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-3  
     
Getting Started  
Starting up for the first time  
When you first turn on the power, the computer's initial screen is the  
®
Windows Vista Startup Screen Logo. Follow the on-screen directions for  
each screen. During setup, you can click the Back button to return to the  
previous screen.  
®
Be sure to read the Windows Operating System End User License  
Agreement carefully.  
Turning off the power  
The power can be turned off in one of three modes, either Shutdown (Boot)  
Mode, Hibernation Mode or Sleep Mode.  
Shut Down mode (Boot mode)  
When you turn off the power in Shut Down mode no data will be saved and  
the computer will boot to the operating system's main screen the next time  
it is turned on.  
1. If you have entered data, either save it to the hard disk, drive or to other  
storage media.  
2. Make sure all disk/disks activity has stopped before removing the  
CD/DVD or floppy diskette.  
Make sure the Hard Disk Drive indicators is off. If you turn off the  
power while a disk (disks) is being accessed, you can lose data or  
damage the disk.  
Never turn off the power while an application is running. Doing so could  
cause loss data.  
Never turn off the power, disconnect an external storage device or  
remove storage media during data read/write. Doing so can cause data  
loss.  
3. Click Start then click the arrow button (  
) located in the power  
management buttons (  
menu.  
) and select Shut Down from the  
4. Turn off any peripheral devices connected to your computer.  
Do not turn the computer or peripheral devices back on immediately - wait  
a short period to avoid and peripheral damage.  
Sleep Mode  
If you do have to interrupt your work, you are able to turn off the power  
without exiting from your software by placing the computer into Sleep  
Mode. In this mode data is maintained in the computer’s main memory so  
that, when you turn on the power again, you can continue working right  
where you left off  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-4  
     
Getting Started  
When the AC adaptor is connected, the computer will go into Sleep  
Mode according to the settings in the Power Options.  
To restore the operation from the computer from Sleep Mode, press the  
power button or press any key. Please be aware that this latter action  
only works on the internal keyboard if the. Wake-up on Keyboard  
option is enabled within the HW Setup utility.  
If the computer enters Sleep Mode while a network application is  
active, the application might not be restored when the computer is next  
turned on and the system returns from Sleep Mode.  
To prevent the computer from automatically entering Sleep Mode,  
disable Sleep Mode within the Power Options. However, please be  
aware that this configuration will nullify the computer’s Energy Star  
compliance.  
Before entering Sleep Mode, be sure to save your data.  
Do not install or remove a memory module while the computer is in  
Sleep Mode. The Computer or the module could be damaged.  
Do not remove the battery pack while the computer is in Sleep Mode  
(unless the computer is connected to an AC power source). Data in  
memory will be lost.  
Benefits of Sleep Mode  
The Sleep Mode feature provides the following benefits:  
Restore the previous working enviroment more rapidly than does the  
Hibernation Mode feature.  
Saves power by shutting down the system when the computer receives  
no input or hardware access for the time period set by the System  
Sleep Mode feature.  
Allows the use of the panel power off feature.  
Executing Sleep Mode  
You can enter also Sleep Mode by pressing Fn + F3 - please refer to  
Chapter 6, The Keyboard, for further details.  
Youu can enter Sleep Mode in one of three ways:  
1. Click Start then click the sleep button (  
) located in the power  
management buttons (  
), or click the arrow button (  
)
and select Sleep from the menu.  
2. Close the computer’s LCD display panel. Please note that this feature  
must be enabled - please refer to the Power Options (to access it, click  
Start Control Panel System and Maintenance Power  
Options).  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-5  
Getting Started  
3. Press the power button. Please note that this feature must be enabled  
- please refer to the Power Options (to access it, click Start ꢀ  
Control Panel System and Maintenance Power Options ꢀ  
Choose what the power button do).  
When you turn the power back on, you can continue where you left when  
you shutdown the computer.  
When the computer is in Sleep Mode, the power indicator will blink  
orange.  
If you are operating the computer on battery power, you can lengthen  
the overall operating time by turning it off into Hibernation Mode - Sleep  
Mode will consume more power while the computer is off.  
Sleep Mode limitations  
Sleep Mode will not function under the following conditions:  
Power is turned back on immediately after shutting down.  
Memory circuits are exposed to static electricity or electrical noise.  
Hibernation mode  
The Hibernation Mode feature saves the contents of memory to the hard  
disk drive when the computer is turned off so that, the next time it is turned  
on, the previous state is restored. Please note that the Hibernation Mode  
feature does not save the status of any peripheral devices connected to the  
computer.  
Save your data. While entering Hibernation Mode, the computer saves  
the contents of memory to the hard disk drive. However, for safety  
sake, it is best to save your data manually.  
Data will be lost if you remove the battery or disconnect the AC adaptor  
before the save is completed. Wait for the Hard Disk Drive indicator to  
go out.  
Do not install or remove a memory module while the computer is in  
Hibernation Mode. Data will be lost.  
Benefits of Hibernation Mode  
The Hibernation Mode feature provides the following benefits:  
Saves Data to the hard disk drive when the computer automatically  
shutsdown because of a low battery condition.  
You can return to your previous working environment immediately when  
you turn on the computer.  
Saves power by shutting down the system when the computer receives  
no input or hardware access for the time period set by the System  
Hibernate feature.  
Allows the use of the panel power off feature.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-6  
Getting Started  
Starting Hibernation Mode  
You can also enable Hibernation Mode by pressing Fn + F4 - please refer  
to Chapter 6, The Keyboard, for further details.  
To enter Hibernation Mode, follow the steps below.  
1. Click Start.  
2. Click the arrow button (  
).  
) in the power management buttons  
(
3. Select Hibernate from the menu.  
Automatic Hibernation Mode  
The computer can be configured to enter Hibernate Mode automatically  
when you press the power button or close the lid. In order to define these  
settings, you can follow the steps as described below:  
1. Click Start and click the Control Panel.  
2. Click System and Maintenance and click Power Options.  
3. Click Choose what the Power Button do or Choose what closing  
the lid does.  
4. Enable the desired Hibernation Mode settings for When I press the  
power button or When I close the lid.  
5. Click the Save Changes button.  
Data save in Hibernation Mode  
When you turn off the power in Hibernation Mode, the computer takes a  
moment to save the current data in memory to the hard disk drive. During  
this time, the Hard Disk Drive indicator will glow.  
After you turn off the computer, and the content of memory has been saved  
to the hard disk drive, turn off the power to any peripheral devices.  
Do not turn the computer or devices back on immediately. Wait a moment  
to let all capacitors fully discharge.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-7  
Getting Started  
Restarting the computer  
Certain conditions require that you reset the computer, for example if:  
You change certain computer settings.  
An errors and the computer does not respond you your keyboard  
commands.  
If you need to restart the computer, there are three ways this can be  
achieved:  
1. Click Start then click the arrow button (  
) in the power management  
buttons ( ) and select Restart from the menu.  
2. Press Ctrl + Alt + Del to display the menu window, then select Restart  
from the Shutdown options.  
3. Press the power button and hold it down for five seconds. Once the  
computer has turned itself off, wait between ten and fifteen seconds  
before turning the power on again by pressing the power button.  
System Recovery Options  
About 1.5 GB hidden partition is allocated on the hard disk drive for the  
System Recovery Options.This partition stores files which can be used to  
repair the system in the event of a problem.  
The System Recovery Options feature will be unusable if this partition is  
deleted.  
System Recovery Options  
The System Recovery Options feature is installed on the hard disk when  
shipped from the factory. In the event that an error occurs between the time  
power is turned ON and login, and the error is repairable, the Windows  
Recovery Enviroment will automatically repair the error.  
The Window Recovery Environment can also be run manually to repair  
errors.  
The procedure is as follows. Follow the instructions shown on the on-  
screen menu.  
1. Turn off the computer.  
2. While holding the F8 key, turn the computer again.  
3. The Advanced Boot Options menu will be displayed.  
Use the arrow keys to select Repair Your Computer and press Enter.  
4. Follow the on-screen instructions.  
The Windows VistaComplete PC Backup feature can be used on  
Windows VistaBusiness Edition and Ultimate Edition.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-8  
   
Getting Started  
Restoring the pre-installed software from the Product  
Recovery disc  
If preinstalled files are damaged, use the Product Recovery disc to restore  
them. To restore the operating system and all preinstalled software, follow  
the steps below.  
When you reinstall the Windows operating system, the hard disk will be  
reformatted and all data will be lost. You can not use System Recovery  
Options if restoring the pre-installed software without System Recovery  
options.  
1. Load the Product Recovery disc in the drive and turn off the computer's  
power.  
2. Switch on the computer and, when the In Touch with Tomorrow  
TOSHIBA prompt appears, press the F12 key to display the Boot Menu.  
For 2HDD Model, If HDD1 is first, go to step 3. If HDD1 is not first, do as  
follows:  
Select <Enter Setup>  
Press the F9 key to set to default settings, and select the [Yes].  
When the "In Touch with Tomorrow TOSHIBA "prompt appears,  
press the F12 key to display the Boot menu. Continue with step 3.  
3. Use the up or down cursor key to select the CD-ROM/DVD drive in the  
display menu.  
4. Follow the on-screen instructions.  
5. If your computer came with additional software installed, this software  
can not be recovered from the Product Recovery disk. Re-install these  
applications (e.g. Works Suite, DVD Player, Games, etc.) separately  
from other media.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-9  
 
Operating Basics  
Chapter 4  
Operating Basics  
This chapter gives information on basic operations including using the  
TouchPad, optical disc drives, the internal modem, LAN and wireless LAN.  
It also provides tips on caring for your computer and on heat dispersal.  
Using the TouchPad  
To use the TouchPad, simply move your finger tip across it in the direction  
you want the on-screen pointer to go.  
2
1
1. TouchPad control buttons  
2. TouchPad/Dual Mode Pad  
TouchPad and control buttons  
The two buttons below the TouchPad are used like the buttons on a  
standard mouse.  
Press the left button to select a menu item or to manipulate text or graphics  
designated by the pointer. Press the right button to display a menu or other  
function depending on the software you are using.  
Do not press on the TouchPad too hard or press a sharp object such as a  
ball point pen against it. The TouchPad could be damaged.  
The TouchPad has similar functions to a two-button mouse with a scroll  
wheel. For some functions, you can tap it instead of pressing a button.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-1  
       
Operating Basics  
You can customize pointing device actions in Mouse Properties. Open the  
Control Panel, select the Mouse icon and press Enter to open the Mouse  
Properties window.  
Click:  
Click the left control button or tap the TouchPad once.  
Double-click: Click the left control button twice or tap the TouchPad twice.  
Scroll  
Vertical: Move your finger up or down the right edge of the  
TouchPad.  
Horizontal: Move your finger left or right along the bottom  
edge of the TouchPad.  
Using the Web Camera  
This section describes the bundled Web Camera utility, which can  
Snapshot and video images. The Web Camera will auto-run when  
Windows starts.  
1
2
1. Web Camera Led  
2. Web Camera Lens  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-2  
   
Operating Basics  
Using the software  
The Web Camera software is pre-configured to start when you turn on  
Windows Vista; if you need to restart it go to Start Programs Camera  
Assistant Software Camera Assistant Software.  
1
3
2
4
5
6
8
7
1. Capture still images  
2. Video Recording  
3. Audio Recording  
4. Function  
5. Display Window  
6. Camera Resolution  
7. Mute  
8. Effects  
Snapshot  
Click to see a preview of the Snapshot image; you  
can also e-mail the image.  
Video Recording  
Audio Recording  
Functions  
Click to start recording, click again to stop  
recording and see a preview of the video.  
Click to start recording, click again to stop and  
listen to a preview of the audio.  
Access additional functions: About, Player,  
Effects, Properties, Settings and Help.  
About  
Player  
Effects  
Displays software manufacturer details.  
Play video files.  
Choose images to be displayed on the capture  
screen.  
Properties  
Choose from the Options tab to flip, zoom, flicker  
rate, night mode and backlight compensation; in  
the Image tab change the colour settings; in the  
profile tab change the lighting conditions.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-3  
Operating Basics  
Settings  
Choose from the: Options tab to change the tool  
position; the Picture tab to select picture output  
options such as size, export file and saving  
location; the Video tab to choose output settings  
such as Frame Rate, Size, Compression and the  
file save path; the Audio tab to chnage the Audio  
Device, Compression, Volume and file save path.  
Help  
Displays the help files for the software.  
Using the internal modem  
This section describes how to setup the modem and use it to connect to  
other computer systems. Refer to the computer's online help files and the  
online help files for your modem software, for more information.  
The internal modem does not support the voice functions described in the  
help files. All data and fax functions are supported.  
In case of a lightning storm, unplug the modem cable from the  
telephone jack.  
Do not connect the modem to a digital telephone line. A digital line will  
damage the modem.  
IMPORTANT SAFETY INSTRUCTIONS  
When using your telephone equipment, basic safety precautions should  
always be followed to reduce the risk of fire, electric shock and injury to  
persons, including the following:  
1. Do not use this product near water, for example, near a bathtub, wash  
bowl, kitchen sink or laundry tub, in a wet basement or near a  
swimming pool.  
2. Avoid using a telephone (other than a cordless type) during an  
electrical storm. There may be a remote risk of electric shock from  
lightning.  
3. Do not use the telephone to report a gas leak in the vicinity of the leak.  
4. Use only the power cord indicated in this manual.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-4  
 
Operating Basics  
Region selection  
Telecommunication regulations vary from one country/region to another, so  
you will need to make sure the internal modem's settings are correct for the  
country/region in which it will be used.  
1. Open the Modem Region Select application. It is located on the  
Programs menu at TOSHIBA Networking Modem Region  
Select.  
Do not use the Country/Region Select function in the Modem setup utility  
in the Control Panel if the function is available. If you change the Country/  
Region in the Control Panel, the change may not take effect.  
2. The Region Selection icon appears on the Windows Task Bar.  
The Region Selection icon  
3. Click the icon with the primary mouse button to display a list of regions  
that the modem supports. A sub menu for telephony location  
information will also be displayed. A check will appear next to the  
currently selected region and telephony location.  
4. Select a region from the region menu or a telephony location from the  
submenu.  
When you click a region it becomes the modem's region selection,  
and the New Location for telephony will be set automatically.  
When you select a telephony location, the corresponding region is  
automatically selected and it becomes the modem's current region  
setting.  
Properties menu  
Click the icon with the secondary mouse button to display the following  
menu.  
The properties menu  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-5  
Operating Basics  
Settings  
You can enable or disable the following settings:  
AutoRun Mode  
Region Select Utility starts automatically when you start up the operating  
system.  
Open the Dialling Properties dialogue box after selecting  
region  
The dialling properties dialogue box will be displayed automatically after  
you select the region.  
Location list for region selection  
A submenu appears displaying location information for telephony.  
Open dialogue box, if the modem and Telephony Current  
Location region code do not match  
A warning dialogue box is displayed if current settings for region code and  
telephony location are incorrect.  
Modem Selection  
If the computer cannot recognize the internal modem, a dialogue box is  
displayed. Select the COM port for your modem to use.  
Dialing Properties  
Select this item to display the dialling properties.  
If you are using the computer in Japan, technical regulations described in  
the Telecommunications Business Law require that you select Japan  
region mode. It is illegal to use the modem in Japan with any other  
selection.  
Connecting  
To connect the internal modem cable, follow the steps below.  
In case of a lightning storm, unplug the modem cable from the  
telephone jack.  
Do not connect the modem to a digital telephone line. A digital line will  
damage the modem.  
1. Plug one end of the modular cable into the modem jack.  
2. Plug the other end of the modular cable into a telephone jack  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-6  
Operating Basics  
Connecting the internal modem  
Do not pull on the cable or move the computer while the cable is  
connected.  
If you find that the modem speed is low or communication is interrupted  
when you are using the modem, please set the CPU speed to Maximum  
within the TOSHIBA Power Saver utility.  
Disconnecting  
To disconnect the internal modem cable, follow the steps below.  
1. Pinch the lever on the connector in the telephone jack and pull out the  
connector.  
2. Disconnect the cable from the computer in the same manner.  
LAN  
The computer is equipped with networking hardware that supports Ethernet  
LAN (10 megabits per second, 10BASE-T) or Fast Ethernet LAN  
(100 megabits per second, 100BASE-T).  
Do not install or remove an optional memory module while the Wake-up on  
LAN feature is enabled.  
The Wake-up on LAN feature does not work on battery power. In  
Hibernate/Power off mode you should always leave the computer  
connected to the AC adapter if you are using this feature.  
Connecting the LAN cable  
The computer must be configured properly before connecting to a LAN.  
Logging onto a LAN using the computer's default settings could cause a  
malfunction in LAN operation. Check with your LAN administrator  
regarding set-up procedures.  
If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you  
can connect using either a CAT5 or a CAT3 cable.  
If you are using 100BASE-TX Fast Ethernet you must connect using a  
CAT5 cable.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-7  
 
Operating Basics  
To connect the LAN cable, follow the steps below.  
1. Turn off the power to the computer and to all external devices  
connected to the computer.  
2. Plug one end of the cable into the LAN jack. Press gently until you hear  
the latch click into place.  
Connecting the LAN cable  
3. Plug the other end of the cable into a LAN hub connector. Check with  
your LAN administrator before connecting to a hub.  
Disconnecting the LAN cable  
To disconnect the LAN cable, follow the steps below.  
1. Pinch the lever on the connector in the computer's LAN jack and pull  
out the connector.  
2. Disconnect the cable from the LAN hub in the same manner. Check  
with your LAN administrator before disconnecting from the hub.  
Wireless LAN  
The wireless LAN is compatible with other LAN systems that comply with  
the IEEE802.11a, 11b, 11g and Draft 11n wireless LAN standards.  
It supports the following:  
Automatic Transmit Rate Select mechanism in the transmit range of 54,  
48, 36, 24, 18, 9, 6 Mbps for 802.11a/b/g and 802.11b/g wireless LAN  
module.  
Advanced Encryption Standard (AES) data encryption, based on 256 bit  
encryption algorithm.  
Wake-up on Wireless LAN is supported on certain Wireless LAN model  
from Sleep/Hibernate mode in AC adaptor mode.  
(depending on the model you purchased.)  
Frequency Channel Selection (5 GHz and 2.4 GHz)  
Roaming over multiple channels  
Card Power Management  
Wi-Fi Protected Access (WPA) data encryption  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-8  
 
Operating Basics  
11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b,  
802.11g and 802.11n respectively. The IEEE 802.11n specification has not  
been finalized and is currently in draft release. The TOSHIBA 11a/b/g/n  
Wireless LAN Adapters are based on the Draft Release, Version 1.0, of the  
IEEE 802.11n specification. An Adapter with 11a/b, 11a/b/g or 11a/b/g/n  
can communicate on any of its supported formats; the actual connection  
will be based on the access point to which it connects.  
Connection compatibility with the wireless equipment in Draft 11n mode is  
not guaranteed.  
The Draft 11n function cannot be used with WEP/TKIP. Draft 11n mode can  
be used only with WPA-PSK (AES) mode or no security mode.  
Security  
1. TOSHIBA strongly recommends that you enable the WPA encryption  
function otherwise your computer could be left open to illicit access via  
the wireless LAN connection which may result in an intrusion that can  
lead to the theft or loss of stored data among other things. In addition,  
the owner of an Internet connection is responsible for all browsing,  
downloading, and uploading activities on that connection. Therefore, an  
unsecured wireless network connected directly to the Internet is an  
open invitation for outsiders to abuse your ISP account and privileges.  
2. TOSHIBA is not liable for the eavesdropping on your data due to the  
use of the wireless LAN connection and any damage that may occur  
thereof.  
Bluetooth wireless technology  
®
Bluetooth wireless technology eliminates the need for cables between  
electronic devices such as desktop computers, printers and mobile phones.  
Bluetooth wireless technology has the following features:  
Worldwide operation  
The Bluetooth radio transmitter and receiver operate in the 2.4 GHz band,  
which is license-free and compatible with radio systems in most countries  
in the world.  
Radio links  
You can easily establish links between two or more devices. The link is  
maintained even if the devices are not within line of sight.  
Security  
Two advanced security mechanisms ensure a high level of security:  
Authentication prevents access to critical data and makes it impossible  
to falsify the origin of a message.  
Encryption prevents eavesdropping and maintains link privacy.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-9  
Operating Basics  
Bluetooth® Stack for Windows® by TOSHIBA  
Please note that this software is specifically designed for the following  
operating systems:  
®
Microsoft Windows Vista™  
Detailed information regarding the use with these operating systems is  
listed below. Please refer also to the electronic information which is  
included with each software.  
®
®
This Bluetooth Stack is based on Bluetooth Version 1.1/1.2/2.0+EDR  
specification. TOSHIBA cannot confirm compatibility between any PC  
products and/or other electronic devices that use Bluetooth™ other than  
TOSHIBA mobile PCs.  
®
Release Notes related to the Bluetooth Stack for  
®
Windows by TOSHIBA  
1. Fax application software:  
Regarding FAX application software, there are some software that you  
®
cannot use on this Bluetooth Stack.  
2. Multi User:  
On Windows Vista, the use of Bluetooth is not supported in a multi-user  
environment. This means that, when you use Bluetooth, other users  
logged onto the same computer will not be able to use its Bluetooth  
functionality.  
Product Support:  
The latest information regarding Operating System support, Language  
Support or available upgrades can be found on our web site  
Wireless communications  
It may not be possible to make a network connection to a specified network  
name using the ad hoc network function. If this occurs, the new network(*)  
will have to be configured for all computers connected to the same network  
in order to re-enable network connections.  
* Please be sure to use new network name.  
Wireless communication switch  
You can enable or disable the Wireless devices function with the on/off  
switch. No transmissions are sent or received when the switch is off. Slide  
the switch forward to turn it on and backward to turn it off.  
Turn the switch off in airplanes and hospitals. Check the LED, it stops  
glowing when the wireless communication function is off.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-10  
Operating Basics  
Wireless communication LED  
The LED indicates the status of the wireless communication functions.  
LED status  
LED off  
Indication  
Wireless communication switch is set to off.  
Wireless communication switch is on.  
LED glows  
Using optical disc drives  
The illustrations in this section might differ slightly from your drive, but  
operation is the same for all optical disc drives. The full-size drive provides  
high-performance execution of disc-based programs. You can run either  
12 cm (4.72") or 8 cm (3.15") discs without an adapter. An ATAPI interface  
controller is used for disc drive operation. When the computer is accessing  
a disc, an indicator on the drive illuminates.  
Use the DVD Video Player to view DVD-Video discs.  
If you have a DVD Super Multi drive or HD DVD drive, refer also to the  
Writing CD/DVDs on DVD Super Multi drive section or HD DVD section for  
precautions on writing to CDs.  
Loading optical disc media  
To load a disc, follow the steps below.  
1. Turn on the power.  
2. a. Press the eject button to open the drawer slightly.  
Eject button  
Pressing the eject button  
b. Pressing the eject button will not open the drawer when the  
computer's power is off. If the power is off, you can open the drawer by  
inserting a slender object (about 15 mm) such as a straightened paper  
clip into the eject hole just to the right of the eject button.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-11  
 
Operating Basics  
Manual release with the eject hole  
3. Grasp the drawer gently and pull until it is fully open.  
Pulling the drawer open  
4. Lay the disc, label side up, in the drawer.  
Inserting a disc  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-12  
Operating Basics  
Be careful not to touch the lens or the area around it. Doing so could cause  
the drive to malfunction.  
5. Press gently at the centre of the disc until you feel it click into place. The  
disc should lie below the top of the spindle, flush with its base.  
6. Push the centre of the drawer to close it. Press gently until it locks in  
place.  
If the disc is not seated properly when the drawer is closed, it might be  
damaged. Also, the drawer might not open fully when you press the eject  
button.  
Closing the drive drawer  
Removing optical disc media  
To remove the disc, follow the steps below.  
Do not press the eject button while the computer is accessing the disc  
drive. Wait for the optical disc indicator to go out before you open the  
drawer. Also, if the disc is spinning when you open it, wait for it to stop  
before you remove it.  
1. To pop the drawer partially open, press the eject button. Gently pull the  
drawer out until it is fully opened.  
When the drawer pops open slightly, wait a moment to make sure the  
disc has stopped spinning before pulling the drawer fully open.  
Turn off the power before you use the eject hole. If the disc is spinning  
when you open the drawer, it could fly off the spindle and cause injury.  
2. The disc extends slightly over the sides of the drawer so you can grasp  
it. Hold it gently and lift it out.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-13  
Operating Basics  
Removing a disc  
3. Push the centre of the drawer to close it. Press gently until it locks into  
place.  
Buttons  
The Internet button and the CD/DVD button can be assigned functions and  
applications in the TOSHIBA Controls Properties.  
1. Move mouse cursor and reach the top of desktop screen. The back  
cards and white cards appear. Click "Button support" white card.  
2. "Button Support" white card fully appears. After double click this card,  
the dialog for changing button function is displayed.  
3. Change function of Buttons. Or you can go to:  
1. Start All programs TOSHIBA Utilities Toshiba Assist.  
2. Choose optimize from left panel then select TOSHIBA Button  
Controls.  
TOSHIBA Button Support  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-14  
Operating Basics  
CD/DVD play control buttons  
In addition to the power button, the following four buttons control functions  
relating to the playback of optical media and digital audio data:  
Play/Pause  
Stop  
Starts or pauses play  
Stops play  
Next  
Advances to the next track, chapter or data  
Returns to the previous track, chapter or data  
Previous  
If Random or Shuffle is selected in Windows Media Player, selecting Next  
or Previous advances to a random selection.  
TOSHIBA Disc Creator  
Note the following limitations when you use TOSHIBA Disc Creator:  
DVD-Video cannot be created using TOSHIBA Disc Creator.  
DVD-Audio cannot be created using TOSHIBA Disc Creator.  
You cannot use the TOSHIBA Disc Creator "Audio CD" function to  
record music to the DVD-R/-RW or DVD+R/+RW media.  
Do not use the "Disc Backup" function of TOSHIBA Disc Creator to  
copy DVD-Video and DVD-ROM with copyright protection.  
DVD-RAM media cannot be backed up with the "Disc Backup" function  
of TOSHIBA Disc Creator.  
You cannot back up a CD-ROM or CD-R/RW to DVD-R/-RW or DVD+R/  
+RW using the "Disc Backup" function of TOSHIBA Disc Creator.  
You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW or DVD+R/  
+RW to CD-R/RW using TOSHIBA Disc Creator.  
TOSHIBA Disc Creator cannot record in packet format.  
You might not be able to use the "Disc Backup" function of TOSHIBA  
Disc Creator to backup a DVD-R/-RW or DVD+R/+RW disc that was  
made with other software on a different DVD-R/-RW or DVD+R/+RW  
recorder.  
If you add data to a DVD-R and DVD+R disc that you have already  
recorded to, you might not be able to read the added data under some  
circumstances. It cannot be read in 16-bit operating systems, such as  
Windows 98SE and Windows ME, in Windows NT4 you will need  
Service Pack 6 or later to read the data, and in Windows 2000 you will  
need Service Pack 2 or later to read it. Some optical media drives  
cannot read added data regardless of the operating system.  
TOSHIBA Disc Creator does not support recording to DVD-RAM discs.  
To record to a DVD-RAM, use Explorer or other similar utility.  
When you back up a DVD disc, be sure the source drive supports  
recording to DVD-R/-RW or DVD+R/+RW discs. If the source drive  
does not support recording to DVD-R/-RW or DVD+R/+RW discs, it  
might not be backed up correctly.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-15  
 
Operating Basics  
When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW, be sure to  
use the same type of disc.  
You cannot partially delete any data written to a CD-RW, DVD-RW or  
DVD+RW disc.  
Data Verification  
To verify that data is written or rewritten correctly, follow the steps below  
before you write or rewrite a Data CD/DVD.  
1. Display the setting dialog box by one of the following two steps:  
Click the setting button (  
) for writing on the main toolbar in the  
Data CD/DVD mode.  
Select Setting for writing Data CD/DVD in the Setting menu.  
2. Mark the Verify written data check box.  
3. Select File Open or Full Compare mode.  
4. Click the OK button.  
Media Care  
This section provides tips on protecting data stored on your discs and  
disks.  
Handle your media with care. The following simple precautions will  
increase the lifetime of your media and protect the data stored on it:  
1. Store your discs in the container they came in to protect them and keep  
them clean.  
2. Do not bend the disc.  
3. Do not write on, apply a sticker to, or otherwise mar the surface of the  
disc that contains data.  
4. Hold the disc by its outside edge or the edge on the center hole.  
Fingerprints on the surface can prevent the drive from properly reading  
data.  
5. Do not expose to direct sunlight, or extreme heat or cold, and do not  
place heavy objects on your discs.  
6. If your discs become dusty or dirty, wipe them with a clean dry cloth.  
Wipe from the center out, do not wipe in a circular direction around the  
disc. If necessary, use a cloth dampened in water or a neutral cleaner.  
Do not use benzine, thinner or similar cleaner.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-16  
   
Operating Basics  
Discs  
1. Store your disks in the container they came in to protect them and keep  
them clean. If a disk is dirty, do not use cleaning fluid. Clean it with a  
soft damp cloth.  
2. Do not slide back the disk's protective metal covering or touch the disk's  
magnetic surface. Fingerprints may prevent the disk drive from reading  
data from the disk.  
3. Data may be lost if the disk is twisted, bent, or exposed to direct  
sunlight, or extreme heat or cold.  
4. Do not place heavy objects on your disks.  
5. Do not eat, smoke, or use erasers near your disks. Foreign particles  
inside the disk's jacket can damage the magnetic surface.  
6. Magnetic energy can destroy data on disks. Keep your disks away from  
speakers, radios, television sets and other sources of magnetic fields.  
TV-Out & HDMI  
Use the TV-Out port to connect to a television. Be sure to use a 4 pin type  
S-video cable. Use the HDMI port to connect to an HDTV. For more details,  
see Appendix B.  
TV Out Port  
HDMI  
Setting up more than one display  
You can set up your computer to utilize more than one display, effectively  
spreading a single desktop screen across two monitors.  
The Display settings window allows you to adjust more precisely the  
relative positioning of the two displays when they are configured as an  
extended desktop. On the Display Settings window, the two displays can be  
positioned horizontally, vertically or in any diagonal configuration you wish,  
as shown below.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-17  
     
Operating Basics  
If an external display will not be connected next time you use your  
computer, you should cancel any extended desktop or clone display  
settings before shutting down your computer.  
Clone display settings are those where more than one device has been  
selected and is simultaneously applicable.  
Cleaning the computer  
To help ensure long, trouble-free operation, keep the computer free of dust  
and use care with liquids around the computer.  
Be careful not to spill liquids into the computer. If the computer does get  
wet, turn the power off immediately and let the computer dry completely  
before you turn it on again.  
Clean the computer using a slightly damp (with water) cloth. You can  
use glass cleaner on the display. Spray a small amount of cleaner on a  
soft, clean cloth and wipe the screen gently with the cloth.  
Never spray cleaner directly onto the computer or let liquid run into any  
part of it. Never use harsh or caustic chemical products to clean the  
computer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-18  
 
Operating Basics  
Moving the computer  
The computer is designed for rugged durability. However, a few simple  
precautions taken when moving the computer will help ensure trouble-free  
operation.  
Make sure all disk activity has ended before moving the computer.  
Check the Built-in Hard Disk Drive and optical disc drive indicators  
on the computer.  
If a disk is in the disk drive, remove it.  
If a disc is in the optical disc drive, remove it. Also make sure the optical  
disc drive drawer is securely closed.  
Turn off the power to the computer.  
Disconnect all peripherals before moving the computer.  
Close the display. Do not pick up the computer by its display panel or  
back (where the interface ports are located).  
Disconnect the AC adapter if it is connected.  
Use the carrying case when transporting the computer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-19  
 
About the HD DVD  
Chapter 5  
About the HD DVD  
This chapter describes the features, use of HD DVD and HD DVD Media.  
HD DVD is provided with some models.  
Summary  
HD DVD allows users to enjoy video, concerts and other packaged content  
by taking advantage of its large amount of storage space and high-quality  
audio and video. HD DVD also allows for the storage of long video when  
combined with the latest video compression technologies.  
The storage capacity and data transfer rate of HD DVD is superior to  
standard DVD, with two types of playback-only discs in single-sided single-  
layer 15 GB and single-sided dual-layer 30 GB (Gigabyte) formats.  
1. Unfinalized DVDs created on home DVD recorders may not be  
playable on the computer.  
2. When inserting an unfinalized DVD-R DL disc into the computer,  
Windows Vista™ may automatically finalize the disc and prevent  
further writing.  
Important information on use  
Because HD DVD is a new format there is a possibility of new features  
being added at a later date. As such, it is important that the purchaser  
understands that software and other updates may be necessary after  
purchase. Please be sure to complete user registration in order to  
receive timely product updates.  
This product can play existing DVD and CD formats, however, playback  
may not be possible with some software. This product cannot play  
Blu-ray DISC™ format software.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-1  
       
About the HD DVD  
HD DVD is a new standard which makes use of new technologies. As  
such, there is a possibility of problems occurring related to connection,  
compatibility or operation with some discs and other digital devices. The  
HD DVD-ROM logo signifies that this drive complies with the HD DVD  
physical standard, and does not signify compliance with the HD DVD  
Video standard. This device does not support advanced features of the  
HD DVD Video standard as defined by the DVD Forum, including  
picture-in-picture and network download features. Screen movement  
may not be smooth, and performance may be lowered with some  
HD DVD content.  
Playback of high bit rate content may cause frame dropping, audio  
skipping or decrease in computer performance.  
Viewing of HD DVD content on an external display requires an HDCP  
capable HDMI™ or DVI input on the external display.  
Make sure to connect the computer's AC adaptor when playing an  
HD DVD.  
CPU power is concentrated on HD DVD playback when playing an  
HD DVD, so make sure to exit all other applications.  
®
Dolby Digital audio enhancements are only supported by Microsoft  
Windows operating system. Content with high sample rates of 48 kHz  
or more are downsampled when output through either the built-in  
speakers or headphone jack.  
generation copy protection technology. Renewal of the AACS key  
integrated into this device is required for uninterrupted enjoyment of  
HD DVD. An Internet connection is required when renewing the key.  
For more information on AACS keys, visit the AACS website  
HD DVD Media  
Like CD and DVD, HD DVD is divided into the read-only and  
recordableformats listed below.  
Some media cannot be used with this product. Be sure to thoroughly  
read section DVD Super Multi drive supporting ±R Double Layer,  
HD DVD-ROM drive or HD DVD-R drive of chapter 2 before using this  
product.  
HD DVD-Video: For video playback. Used to store movies and other  
video.  
HD DVD-ROM: Read-only media.  
HD DVD-R: A recordable media which can be written to only once.  
HD DVD (Twin format disc): Has both HD DVD and DVD recordable  
layers.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-2  
About the HD DVD  
Media Structures and Capacity  
HD DVD  
Recordable Surface  
Recordable Layer Structure  
HD DVD Recordable Layer Only 15 GB  
HD DVD Recordable Layer Only 30 GB  
Capacity  
Single-sided Single-Layer  
Single-sided Dual-Layer  
Double-sided Single-Layer HD DVD Recordable Layer Only 30 GB  
Double-sided Dual-Layer  
HD DVD Recordable Layer Only 60 GB  
HD DVD (Twin format disc)  
Recordable Surface  
Recordable Layer Structure  
HD DVD Recordable Layer  
DVD Recordable Layer  
Capacity  
Single-sided Dual-Layer  
15 GB  
4.7 GB  
Using TOSHIBA HD DVD PLAYER to enjoy HD DVDs  
HD DVD Playback Restrictions  
HD DVD-ROM drive and HD DVD-R drive allow users to enjoy the strong  
visuals of HD DVD-Video.  
"TOSHIBA HD DVD PLAYER" software is provided for playback of  
HD DVD-Video.  
Important information on use  
HD DVD Playback  
HD DVD is a new standard which makes use of new technologies. As  
such, there is a possibility of problems occurring related to connection,  
compatibility or operation with some discs and other digital devices. The  
HD DVD-ROM logo signifies that this drive complies with the HD DVD  
physical standard, and does not signify compliance with the HD DVD  
Video standard. This device might not support advanced features of the  
HD DVD Video standard as defined by the DVD Forum, including  
picture-in-picture and network download features. Screen movement  
may not be smooth, and performance may be lowered with some  
HD DVD content.  
This device supports AACS (Advanced Access Content System) next-  
generation copy protection technology. Renewal of the AACS key  
integrated into this device is required for uninterrupted enjoyment of  
HD DVD. An Internet connection is required when renewing the key.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-3  
 
About the HD DVD  
Because HD DVD playback operates according to programs built-into  
the content, operation methods, operation screens, sound effects, icons  
and other features may vary from disc to disc. For more information on  
these items refer to instructions included with content or contact the  
content manufacturers directly.  
Important information on playing HD DVD Video discs  
HD DVD Video discs  
Please use "TOSHIBA HD DVD PLAYER" for HD DVD Video playback.  
"Windows Media Player" and other commercially available software  
cannot be used for HD DVD Video playback.  
HD DVD Video playback may take several moments to begin.  
When playing an HD DVD (Twin format disc), run it from the "TOSHIBA  
HD DVD Launcher Menu".  
When Using  
Frame dropping, audio skipping or out of synch audio and video may  
occur during playback of some HD DVD Video titles.  
Close all other applications when using the "TOSHIBA HD DVD  
PLAYER". Do not open any other applications or carry out any other  
operations during HD DVD Video playback. Playback may stop or not  
function properly in some situations.  
If windows or icons of memory-resident programs flicker during  
playback, maximize the "TOSHIBA HD DVD PLAYER" window.  
Do not playback HD DVD discs Video while watching or recording  
television programs using other applications. Doing so may cause  
HD DVD Video playback or television program recording errors. In  
addition, if pre-scheduled recording starts during HD DVD Video  
playback it may cause HD DVD Video playback or television program  
recording errors. Please view HD DVD Video during times when there  
is no recording pre-scheduled.  
The resume function cannot be used with some discs on the "TOSHIBA  
HD DVD PLAYER".  
Make sure to connect the computer's AC adaptor when using the  
"TOSHIBA HD DVD PLAYER". Power-saving features may interfere  
with smooth playback.  
Set the "Power option" profile to "High Performance" when using the  
"TOSHIBA HD DVD PLAYER".  
Screen savers will not display while playing a movie in the "TOSHIBA  
HD DVD PLAYER". The computer will also not go into Sleep Mode,  
Hibernation Mode or shutdown while using "TOSHIBA HD DVD  
PLAYER".  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-4  
About the HD DVD  
Do not configure the Display automatic power off function to run while  
the "TOSHIBA HD DVD PLAYER" is running.  
The Windows Aero function is disabled while the "TOSHIBA HD DVD  
PLAYER" is running.  
Display Devices & Audio  
"TOSHIBA HD DVD PLAYER" will only run when "Colors" is set to  
"Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor"  
tab in the "Display Settings". To open the Display Settings, click Start ꢀ  
Control Panel Appearance and Personalization ꢀ  
Personalization Display Settings.  
If the HD DVD Video image is not displayed on an external display or  
television, stop the "TOSHIBA HD DVD PLAYER", and change the  
screen resolution in "Resolution" on the "Monitor" tab in the "Display  
Settings". However, video cannot be output to some external displays  
and televisions due to output or playback conditions.  
An HDCP compatible HDMI input is required on external displays or  
televisions to view video being played in the "TOSHIBA HD DVD  
PLAYER" on an external display or television.  
When viewing on an external display or television, use an HDMI cable  
to connect the external device to the HDMI out port and change the  
display device before playing. The display device cannot be changed  
during playback.  
HD DVD Video can only be displayed on the computer's display panel  
or televisions connected to the computer's HDMI out port. HD DVD  
Video cannot be displayed on televisions connected to the S-Video  
output connector or external displays connected to the RGB connector.  
In addition, HD DVD Video cannot be displayed simultaneously (in  
clone or Dualview modes) on the computer's display panel and an  
external display or television.  
Do not change the screen resolution while running the "TOSHIBA  
HD DVD PLAYER".  
Audio output through the S/PDIF cannot be recorded when playing an  
HD DVD in the "TOSHIBA HD DVD PLAYER".  
Audio data of more than 48 kHz/16 bit will be down sampled to  
48 kHz/16 bit.  
TOSHIBA HD DVD PLAYER  
"TOSHIBA HD DVD PLAYER" software is supported for playback of  
HD DVD Video, DVD-Video and DVD-VR.  
The "TOSHIBA HD DVD PLAYER" does not have a parental control  
function.  
In order to protect copyrights, the Windows Print Screen function is  
disabled when "TOSHIBA HD DVD PLAYER" is running.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-5  
About the HD DVD  
Print Screen functions are disabled even when running other applications  
besides "TOSHIBA HD DVD PLAYER" and when "TOSHIBA HD DVD  
PLAYER" is minimized.  
Please close the "TOSHIBA HD DVD PLAYER" to use the Print Screen  
function.  
Carry out the installation/uninstallation of the "TOSHIBA HD DVD  
PLAYER" under a user account with administrator rights.  
Do not change Windows Users while "TOSHIBA HD DVD PLAYER" is  
running.  
Some HD DVD Video disc titles may return to the title before the  
playback time (playback position) displayed in the control window  
reaches the end time.  
For some HD DVD Video discs, using the control window to change the  
audio track will also change the subtitle track.  
Periodic updates will be necessary to continue using the "TOSHIBA  
HD DVD PLAYER".  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-6  
About the HD DVD  
Using TOSHIBA HD DVD PLAYER  
Starting TOSHIBA HD DVD PLAYER  
Use the following procedure to start "TOSHIBA HD DVD PLAYER".  
1. Insert an HD DVD-Video in the HD DVD drive while Windows Vista™. is  
running.  
When an HD DVD-Video disc and an HD DVD (Twin format disc) are  
set in the HD DVD drive, the following application selection screen may  
appear.  
If this occurs, select Play HD DVD movie or Run the HD DVD  
Launcher, then click OK to launch the TOSHIBA HD DVD PLAYER.  
Application selection screen  
2. Touch the CD/DVD panel on the Front operation panel. Or select  
Start All Programs TOSHIBA HD DVD PLAYER to start  
"TOSHIBA HD DVD PLAYER".  
The TOSHIBA DVD PLAYER can also be started from the Media Center  
top menu.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-7  
 
About the HD DVD  
Operating TOSHIBA HD DVD PLAYER  
Important information on using "TOSHIBA HD DVD PLAYER".  
The HD DVD standard defines A, B, C and D buttons, and some  
software may display "Press the A button" or similar messages. If a  
message of this type appears, use the following corresponding  
keyboard keys.  
A button: keyboard A key  
B button: keyboard B key  
C button: keyboard C key  
D button: keyboard D key  
Screen display and available features may vary amongst HD DVD-  
Videos and scenes.  
Only operation buttons (including remote controller and Front operation  
panels) which correspond to currently available and active features will  
be useable during HD DVD playback.  
If the menu is opened in the Display Area using the Control window's  
Top Menu or Menu buttons, touch pad and mouse menu operations  
may not be able to be used.  
Display Area  
Help  
Maximize  
Setting  
Minimize  
Exit  
TOSHIBA HD DVD PLAYER Control Window  
TOSHIBA HD DVD PLAYER windows  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-8  
 
About the HD DVD  
Display Area  
Maximize  
Displays video. Double click on the Display Area to  
toggle full screen display mode on and off. Click the  
Display Area to display the Control window when it  
isn't displayed.  
Maximizes the window of TOSHIBA HD DVD  
PLAYER.  
Settings  
Help  
Displays the "Settings" screen.  
Opens help.  
Minimize  
Minimizes the window of TOSHIBA HD DVD  
PLAYER.  
Exit  
Closes TOSHIBA HD DVD PLAYER.  
TOSHIBA HD  
DVD PLAYER  
Control window  
The buttons on the panel are used to control  
playback of HD DVD-Video discs. Click the Display  
Area to display the Control window when it is  
hidden. Please refer to the following "TOSHIBA  
HD DVD PLAYER Control window" section for  
more information.  
Open TOSHIBA HD DVD PLAYER HELP  
TOSHIBA HD DVD PLAYER features and instructions are also explained in  
detail in "TOSHIBA HD DVD PLAYER Help".  
Use the following procedure to open "TOSHIBA HD DVD PLAYER Help".  
1. Click the "Help" button (  
) in the Display Area.  
TOSHIBA HD DVD PLAYER Control window  
The following are the main buttons used when playing HD DVD-Video.  
Please refer to Help for details on each button.  
Buttons may not be able to be used on some titles, even if the button is  
displayed.  
Counter  
Always on Top  
Exit  
Current position  
Volume Control  
Mute  
Multi Audio  
Channel Output  
TOSHIBA HD DVD PLAYER Control window (1)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-9  
About the HD DVD  
Counter  
Displays play time, title number and chapter  
number during disc playback.  
Always on top  
Sets the control window as always on top, so that it  
is not hidden by other windows or full screen  
display.  
Exit  
Closes TOSHIBA HD DVD PLAYER.  
Current position  
Displays the current position within the title on the  
bar icon.  
Volume control  
Mute  
Adjusts the volume to the level selected by  
dragging the slider bar.  
Mutes the sound when clicked. Clicking when the  
sound is muted returns the volume to the previous  
level.  
Multi Audio  
Channel Output  
Switches between available multi audio channel,  
during playback of a DVD-VR. This function can be  
used during playback of a DVD-VR only.  
Eject  
Previous Chapter Next Chapter  
One-touch Replay  
One-touch Skip  
Stop  
Fast Rewind  
Play  
Fast Forward  
Pause  
Slow Motion  
TOSHIBA HD DVD PLAYER Control window (2)  
Eject  
Opens the disc tray.  
Previous  
Chapter  
Jumps to the previous chapter.  
Next Chapter  
Jumps to the next chapter.  
One-touch  
Replay  
Rewinds by a specified amount of time and  
continues playback from that position.  
One-touch Skip  
Jumps forward by a specified amount of time and  
continues playback from that position.  
Stop  
Stops a HD DVD currently being run.  
Fast Rewind a HD DVD currently being run.  
Plays an HD DVD.  
Fast Rewind  
Play  
Fast Forward  
Pause  
Fast forwards a HD DVD currently being run.  
Temporally stops a HD DVD currently being run.  
Performs slow motion playback.  
Slow Motion  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-10  
About the HD DVD  
TWIN Format Disc  
TWIN Format Disc  
(HD DVD selected)  
Rewind  
*1  
*1  
(DVD selected)  
Rewind  
Subtitle  
Repeat  
Sound  
Angle Rewind  
Top Menu  
Title/Chapter  
Search  
Drive Specification  
Menu  
Return  
TOSHIBA HD DVD PLAYER Control window (3)  
Subtitle  
Sound  
Switches between available subtitles.  
Switches between audio tracks for titles which have  
more than 1 audio track.  
Angle  
Switches between angles for multi-angle  
compatible titles.  
Repeat  
Switches between repeat chapter, repeat title and  
normal playback modes.  
Title/Chapter  
Search  
Searches for chapters or titles.  
Drive  
Specification  
Specifies which drive to use when an external  
HD DVD drive is connected.  
Top Menu  
Menu  
Displays the HD DVD Top Menu.  
Displays the HD DVD Menu.  
Return  
Displays the HD DVD title selection screen.  
TWIN Format  
Disc (HD DVD  
selected)  
Reads the HD DVD layer of the HD DVD (Twin  
format disc). Click DVD button to switch to the DVD  
layer.  
*1  
TWIN Format  
Disc (DVD  
selected)  
Reads the DVD layer of the HD DVD (Twin format  
disc). Click HD DVD button to switch to the  
HD DVD layer.  
*1  
*1: Displayed when an HD DVD (Twin format disc) is placed in the optical  
disc drive.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-11  
About the HD DVD  
Using the Computer in place of an HD DVD Player  
Videos played using "TOSHIBA HD DVD PLAYER" included with the  
computer can be displayed on a television equipped with an HDMI input  
port.  
HD DVD-Video can only be displayed on the computer's display panel or  
on a television connected to the HDMI out port. HD DVD-Video cannot be  
displayed on televisions connected to the S-Video out port or external  
displays connected to the RGB connector.  
Before Connecting  
Please refer to the television's user manual as well as this chapter when  
connecting the computer to a television.  
Televisions Which Can Be Connected to the Computer.  
Televisions which are equipped with an HDMI input port can be  
connected to the computer.  
Please use a commercially available HDMI cable to connect the  
television and computer.  
Not all televisions equipped with an HDMI input port have been tested  
for compatibility with this product. As such, Toshiba cannot guarantee  
that HD DVD-Video content can be displayed on all televisions  
equipped with an HDMI input port. HD DVD-Video content may not  
display properly on some televisions.  
Connecting to the Computer  
Turn off the television and computer before connecting.  
1. Insert the HDMI cable plug into the HDMI out port on the computer.  
HDMI out port  
Connecting the HDMI out port  
2. Insert the remaining HDMI cable plug into the HDMI input port on the  
television.  
3. Turn on the television first, and then the computer. Audio will be output  
from both the television and the computer. The volume dial or Fn + ESC  
keys can be used to mute the computer audio. The volume level for  
both the television and computer can be adjusted using the WAVE item  
in "Volume Control".  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-12  
 
About the HD DVD  
Switching between Computer and Television Display  
The following method can be used to display HD DVD-Video. The display  
method can be changed by changing the display device setting.  
Configure the following settings to display HD DVD-Video on the  
television. If the following settings are not configured, HD DVD-Video will  
not be displayed on the television.  
Notes on Operation  
Change the display device setting before playing HD DVD-Video. Do  
not change the display device while playing HD DVD-Video.  
Do not change the display device at the following times.  
When reading or writing data  
When carrying out communications operations  
HD DVD-Video cannot be played when using Clone or Dualview  
(extended desktop) displays modes. Set either the computer's display  
panel or the television as the sole display device.  
The display device setting can be changed using the Fn + F5 keys.  
When you press these hot keys, a dialog box appears. Only selectable  
devices will be displayed. Hold down Fn and press F5 again to change the  
device. When you release Fn and F5, the selected device will change. If  
you hold down these hot keys for five seconds the selection will return to  
the computer’s display panel.  
HD DVD-R Disc writing Software (depending on the model  
you purchased)  
®
Ulead DVD MovieFactory for TOSHIBA and TOSHIBA Disc Creator are  
included with this computer for writing HD DVD-R discs.  
Ulead DVD MovieFactory can be used to write files in video format.  
TOSHIBA Disc Creator can be used to write data. Refer to the manuals or  
help files included with the software for detailed usage instructions.  
Methods for accessing the manuals and help files for the software are as  
follows.  
Opening the Ulead DVD MovieFactory Software Start ꢀ  
All Programs DVD MovieFactory for TOSHIBA Ulead DVD  
MovieFactory for TOSHIBA Launcher  
Opening the Ulead DVD MovieFactory Manual Start ꢀ  
All Programs DVD MovieFactory for TOSHIBA User Manual ꢀ  
DVD MovieFactory User Manual  
Opening the TOSHIBA Disc Creator Software Start All Programs ꢀ  
CD&DVD Applications Disc Creator  
Opening the TOSHIBA Disc Creator Manual Start All Programs ꢀ  
CD&DVD Applications Disc Creator Help  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-13  
 
About the HD DVD  
Display Compatibility  
Only the computer's display panel supports display with high definition  
processing. When displaying on a television connected to the computer the  
display on the television will only be ordinary display and not display with  
high definition processing. The following is an HD DVD-Video display  
compatibility list.  
O: The display of TOSHIBA HD DVD PLAYER is possible.  
X: The display of TOSHIBA HD DVD PLAYER is impossible.  
When using TOSHIBA HD DVD  
PLAYER  
Computer's Display Panel  
Television*  
O
O
O
X
External Display*  
Simultaneous Display  
* Can only display on devices equipped with an HDMI port.  
Writing CDs/DVDs on a DVD Super Multi drive or  
HD DVD-ROM drive supporting double layer disc recording  
You can use the DVD Super Multi drive or HD DVD drive to write data to  
either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM discs. The following  
applications for writing are preinstalled:  
®
TOSHIBA Disc Creator or Ulead DVD MovieFactory for TOSHIBA, which  
is a product of Ulead Systems, Inc.  
Important message  
Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM  
media, read and follow all set-up and operating instructions in this section.  
If you fail to do so, the DVD Super Multi drive or HD DVD drive may not  
function properly, and you may fail to write or rewrite, lose data or incur  
other damage.  
Disclaimer  
TOSHIBA does not bear responsibility for the following:  
Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may  
be caused by writing or rewriting with this product.  
Any change or loss of the recorded contents of CD-R/RW or DVD-  
R/-RW/+R/+RW /-RAM media that may be caused by writing or  
rewriting with this product, or for any business profit loss or business  
interruption that may be caused by the change or loss of the recorded  
contents.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-14  
 
About the HD DVD  
Damage that may be caused by using third party equipment or  
software.  
Given the technological limitations of current optical disc writing drives, you  
may experience unexpected writing or rewriting errors due to disc quality or  
problems with hardware devices. Also, it is a good idea to make two or  
more copies of important data, in case of undesired change or loss of the  
recorded contents.  
Before writing or rewriting  
Please observe the following points when you write or rewrite data.  
Based on TOSHIBA's limited compatibility testing, we suggest the  
following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM  
media. However, in no event does TOSHIBA guarantee the operation,  
quality or performance of any disc. Disc quality can affect write or  
rewrite success rates.  
CD-R:  
TAIYOYUDEN CO., LTD.  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
RICOH Co., Ltd.  
Hitachi Maxell Ltd.  
CD-RW:  
DVD-R:  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
RICOH Co., Ltd.  
DVD Specifications for Recordable Disc for  
General Version 2.0  
TAIYOYUDEN CO., LTD.  
Matsushita Electric Industrial Co., Ltd.  
DVD-RW:  
DVD Specifications for Re-recordable Disc for  
Version 1.1 or Version 1.2  
VICTOR COMPANY OF JAPAN, LIMITED.  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
RICOH Co., Ltd.  
DVD+R:  
DVD+RW:  
*DVD-RAM  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
RICOH Co., Ltd.  
DVD Specifications for DVD-RAM Disc for  
Version 2.0, Version 2.1 or Version 2.2  
Matsushita Electric Industrial Co., Ltd.  
Hitachi Maxell Ltd.  
* DVD Multi drive, DVD Super Multi, and HD DVD  
drive can use DVD-RAM.  
DVD+R  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
(Double Layer)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-15  
About the HD DVD  
DVD-R  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
(Dual Layer)  
DVD-R  
Labelflash™  
FUJIFILM Corporation.  
FUJIFILM Corporation.  
DVD+R  
Labelflash™  
If the disc is poor in quality, dirty or damaged, writing or rewriting errors  
may occur. Be careful to check the disc for dirt or damage before you  
use it.  
The actual number of rewrites to CD-RW or DVD-RW/+RW/-RAM is  
affected by the quality of the disc and the way it is used.  
There are two types of DVD-R: authoring and general use discs. Do not  
use authoring discs. Only general use discs can be written to by a  
computer drive.  
We can support only Format 1 of DVD-R DL. Therefore you can not do  
the additional writing. If your data is under DVD-R (SL) capacity, we  
suggest to use DVD-R (SL) media.  
You can use DVD-RAM discs that can be removed from a cartridge and  
DVD-RAM discs designed without a cartridge. You cannot use a disc  
with a 2.6 GB single-sided capacity or 5.2 GB double-sided capacity.  
Other DVD-ROM drives for computers or other DVD players may not be  
able to read DVD-R/+R/-RW/+RW/-RAM discs.  
Data written to a CD-R/DVD-R/+R disc cannot be deleted either in  
whole or in part.  
Data deleted (erased) from a CD-RW and DVD-RW/+RW/-RAM disc  
cannot be recovered. Check the content of the disc carefully before you  
delete it. If multiple drives that can write data to discs are connected, be  
careful not to delete data from the wrong drive.  
In writing to a DVD-R/+R/-RW/+RW disc, some disc space is required  
for file management, so you may not be able to write the full capacity of  
the disc.  
Since the disc is based on the DVD-R/-RW standard, it will be filled with  
dummy data if the written data is less than about 1 GB. Even if you write  
only a small amount of data, it might take time to fill in the dummy data.  
Two types of DVD-R/+R/-RW/+RW/-RAM discs are on the market: data  
and video. Use a video disc to store video data. You can use video  
discs on a DVD recorder as well as on your computer's DVD-ROM  
drive. You cannot use data discs on a DVD recorder.  
DVD-RAM formatted by FAT32 cannot be read in Windows 2000  
without DVD-RAM Driver Software.  
When multiple drives that can write data to discs are connected, be  
careful not to write to the wrong drive.  
Be sure to connect the universal AC adapter before you write or rewrite.  
Before you enter Sleep/Hibernation Mode, be sure to finish DVD-RAM  
writing. Writing is finished if you can eject DVD-RAM media.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-16  
About the HD DVD  
Be sure to close all other software programs except the writing  
software.  
Do not run software such as a screen saver, which can put a heavy load  
on the CPU.  
Operate the computer at full power. Do not use power-saving features.  
Do not write while virus check software is running. Wait for it to finish,  
then disable virus detection programs including any software that  
checks files automatically in the background.  
Do not use hard disk utilities, including those intended to enhance hard  
disk access speed, as they may cause unstable operation and damage  
data.  
Write from the computer's hard disk drive to the CD. Do not try to write  
from shared devices such as a LAN server or any other network device.  
Writing with software other than TOSHIBA Disc Creator or Ulead DVD  
®
MovieFactory for TOSHIBA has not been confirmed. Therefore,  
operation with other software cannot be guaranteed.  
When writing or rewriting  
Please observe/consider the following when you write or rewrite to a CD-  
R/RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.  
Do not perform any of the following actions when writing or rewriting:  
Change users in the Windows Vistaoperating system.  
Operate the computer for any other function, including using a  
mouse or TouchPad/Dual Mode Pad or closing/opening the LCD  
panel.  
Start a communication application such as a modem.  
Apply impact or vibration to the computer.  
Install, remove or connect external devices such as USB devices,  
an external display, i.Link devices or optical digital devices.  
Use the audio/video control button to reproduce music or voice.  
Open the drive.  
Do not use shut down/log off and Sleep/Hibernation while writing or  
rewriting.  
Make sure writing or rewriting is completed before going into  
Sleep/hibernation. Writing is completed if you can open the drive tray.  
Set the computer on a level surface and avoid places subject to  
vibration such as airplanes, trains or cars. Do not use an unstable  
surface such as a stand.  
Keep mobile phones and other wireless communication devices away  
from the computer.  
Always copy data from the hard disk drive to the CD. Do not use cut-  
and-paste as the original data will be lost if there is a write error.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-17  
About the HD DVD  
How to make a Labelflash™ DVD  
Simplified steps for making a Labelflash™ DVD:  
1. Insert a Labelflash™ disc in DVD drive.  
Set printable surface for underside.  
2. Click Start All Programs DVD MovieFactory for TOSHIBA ꢀ  
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD  
MovieFactory.  
3. Click Print Disc Label Label Printing. Ulead Label@Onece is  
started.  
4. Click the General tab.  
5. Choose DVD Drive for Printer. e.g. <E:> PIONEER DVD…  
6. Add and customize the look of your images and text.  
7. Click Labelflash™ setting and choose Draw Quality.  
8. Click Print.  
The availability of Labelflash™ function depends on the model you  
purchased.  
Writing CDs/DVDs/HD DVDs on a HD DVD-R drive (depending  
on the model you purchased)  
You can use the HD DVD-R drive to write data to either CD-R/RW or  
DVD-R/-RW/+R/+RW/-RAM or HD DVD-R discs. The following applications  
for writing are preinstalled:  
®
TOSHIBA Disc Creator or Ulead DVD MovieFactory for TOSHIBA, which  
is a product of Ulead Systems, Inc.  
Important message  
Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM or  
HD DVD-R media, read and follow all set-up and operating instructions in  
this section. If you fail to do so, the HD DVD-R drive may not function  
properly, and you may fail to write or rewrite, lose data or incur other  
damage.  
Disclaimer  
TOSHIBA does not bear responsibility for the following:  
Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM or HD DVD-R  
disc that may be caused by writing or rewriting with this product.  
Any change or loss of the recorded contents of CD-R/RW or DVD-  
R/-RW/+R/+RW /-RAM or HD DVD-R media that may be caused by  
writing or rewriting with this product, or for any business profit loss or  
business interruption that may be caused by the change or loss of the  
recorded contents.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-18  
 
About the HD DVD  
Damage that may be caused by using third party equipment or  
software.  
Given the technological limitations of current optical disc writing drives, you  
may experience unexpected writing or rewriting errors due to disc quality or  
problems with hardware devices. Also, it is a good idea to make two or  
more copies of important data, in case of undesired change or loss of the  
recorded contents.  
Before writing or rewriting  
Please observe the following points when you write or rewrite data.  
Based on TOSHIBA's limited compatibility testing, we suggest the  
following manufacturers of CD-R/RW, DVD-R/+R/-RW/+RW/-RAM and  
HD DVD-R media. However, in no event does TOSHIBA guarantee the  
operation, quality or performance of any disc. Disc quality can affect  
write or rewrite success rates.  
CD-R:  
TAIYOYUDEN CO., LTD.  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
RICOH Co., Ltd.  
Hitachi Maxell Ltd.  
CD-RW:  
DVD-R:  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
RICOH Co., Ltd.  
DVD Specifications for Recordable Disc for  
General Version 2.0  
TAIYOYUDEN CO., LTD.  
Matsushita Electric Industrial Co., Ltd.  
DVD-RW:  
DVD Specifications for Re-recordable Disc for  
Version 1.1 or Version 1.2  
VICTOR COMPANY OF JAPAN, LIMITED.  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
RICOH Co., Ltd.  
DVD+R:  
DVD+RW:  
*DVD-RAM  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
RICOH Co., Ltd.  
DVD Specifications for DVD-RAM Disc for  
Version 2.0, Version 2.1 or Version 2.2  
Matsushita Electric Industrial Co., Ltd.  
Hitachi Maxell Ltd.  
*DVD Multi drive and DVD Super Multi can use  
DVD-RAM.  
DVD+R  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
(Double Layer)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-19  
About the HD DVD  
DVD-R  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
(Dual Layer)  
HD DVD-R  
Hitachi Maxell Ltd.  
(Single Layer)  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
HD DVD-R  
(Dual Layer)  
If the disc is poor in quality, dirty or damaged, writing or rewriting errors  
may occur. Be careful to check the disc for dirt or damage before you  
use it.  
The actual number of rewrites to CD-RW or DVD-RW/+RW/-RAM or  
HD DVD-R is affected by the quality of the disc and the way it is used.  
There are two types of DVD-R: authoring and general use discs. Do not  
use authoring discs. Only general use discs can be written to by a  
computer drive.  
We can support only Format 1 of DVD-R DL. Therefore you can not do  
the additional writing. If your data is under DVD-R (SL) capacity, we  
suggest to use DVD-R (SL) media.  
You can use DVD-RAM discs that can be removed from a cartridge and  
DVD-RAM discs designed without a cartridge. You cannot use a disc  
with a 2.6 GB single-sided capacity or 5.2 GB double-sided capacity.  
Other DVD-ROM drives for computers or other DVD players may not be  
able to read DVD-R/+R/-RW/+RW/-RAM discs.  
Data written to a CD-R/DVD-R/+R disc cannot be deleted either in  
whole or in part.  
Data deleted (erased) from a CD-RW and DVD-RW/+RW/-RAM disc  
cannot be recovered. Check the content of the disc carefully before you  
delete it. If multiple drives that can write data to discs are connected, be  
careful not to delete data from the wrong drive.  
In writing to a DVD-R/+R/-RW/+RW disc, some disc space is required  
for file management, so you may not be able to write the full capacity of  
the disc.  
Since the disc is based on the DVD-R/-RW standard, it will be filled with  
dummy data if the written data is less than about 1 GB. Even if you write  
only a small amount of data, it might take time to fill in the dummy data.  
Two types of DVD-R/+R/-RW/+RW/-RAM discs are on the market: data  
and video. Use a video disc to store video data. You can use video  
discs on a DVD recorder as well as on your computer's DVD-ROM  
drive. You cannot use data discs on a DVD recorder.  
DVD-RAM formatted by FAT32 cannot be read in Windows 2000  
without DVD-RAM Driver Software.  
When multiple drives that can write data to discs are connected, be  
careful not to write to the wrong drive.  
Be sure to connect the universal AC adapter before you write or rewrite.  
Before you enter Sleep/Hibernation Mode, be sure to finish DVD-RAM  
writing. Writing is finished if you can eject DVD-RAM media.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-20  
About the HD DVD  
Be sure to close all other software programs except the writing  
software.  
Do not run software such as a screen saver, which can put a heavy load  
on the CPU.  
Operate the computer at full power. Do not use power-saving features.  
Do not write while virus check software is running. Wait for it to finish,  
then disable virus detection programs including any software that  
checks files automatically in the background.  
Do not use hard disk utilities, including those intended to enhance hard  
disk access speed, as they may cause unstable operation and damage  
data.  
Write from the computer's hard disk drive to the CD. Do not try to write  
from shared devices such as a LAN server or any other network device.  
Writing with software other than TOSHIBA Disc Creator or Ulead DVD  
®
MovieFactory for TOSHIBA has not been confirmed. Therefore,  
operation with other software cannot be guaranteed.  
When writing or rewriting  
Please observe/consider the following when you write or rewrite to a CD-  
R/RW, DVD-R/-RW/-RAM or DVD+R/+RW or HD DVD-R disc.  
Do not perform any of the following actions when writing or rewriting:  
Change users in the Windows Vistaoperating system.  
Operate the computer for any other function, including using a  
mouse or TouchPad/Dual Mode Pad or closing/opening the LCD  
panel.  
Start a communication application such as a modem.  
Apply impact or vibration to the computer.  
Install, remove or connect external devices such as USB devices,  
an external display, i.Link devices or optical digital devices.  
Use the audio/video control button to reproduce music or voice.  
Open the drive.  
Do not use shut down/log off and Sleep/Hibernation while writing or  
rewriting.  
Make sure writing or rewriting is completed before going into  
Sleep/hibernation. Writing is completed if you can open the drive tray.  
Set the computer on a level surface and avoid places subject to  
vibration such as airplanes, trains or cars. Do not use an unstable  
surface such as a stand.  
Keep mobile phones and other wireless communication devices away  
from the computer.  
Always copy data from the hard disk drive to the CD. Do not use cut-  
and-paste as the original data will be lost if there is a write error.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-21  
About the HD DVD  
When Using Ulead DVD MovieFactory® for TOSHIBA  
How to make a DVD-Video  
Simplified steps for making a DVD-Video from video data captured from a  
DV-Camcorder:  
1. Click Start All Programs DVD MovieFactory for TOSHIBA ꢀ  
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD  
MovieFactory.  
2. Insert a DVD-RW or DVD+RW disc in Burner.  
3. Click Video Disc Burn Video to Disc to launch Direct Recording  
dialog box, choose DVD-Video/+VR to invoke Straight Capture to  
Disc Page.  
4. Choose DVD-Video format.  
5. Confirm the capture source is DV.  
6. Press Capture button.  
Simplified steps for making a DVD-Video from adding a video source:  
1. Click Start All Programs DVD MovieFactory for TOSHIBA ꢀ  
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD  
MovieFactory.  
nd  
2. Click Video Disc New Project to invoke 2 Launcher, choose your  
project type, then invoke DVD MovieFactory.  
3. Add source from HD Disk by click Add Video files button to invoke  
browser dialog box.  
4. Choose the sourse video then go to the Next page to apply Menu.  
5. After choose the menu template, press Next button to go to Burning  
Page.  
6. Choose the output type then press Burn button.  
How to learn more about Ulead DVD MovieFactory®  
Please refer to the Help and Manul file for additional Ulead DVD  
MovieFactory information.  
Important information for use  
Note the following limitations when you write video DVD:  
1. Editing digital video  
Log in with Administrator rights to use DVD MovieFactory.  
Make sure that your computer is running on AC power when using DVD  
MovieFactory.  
Operate the computer at Full Power. Do not use power-saving features.  
While you are editing DVD, you can display previews. However, if  
another application is running, the preview might not display properly.  
DVD MovieFactory cannot edit or play copy protected content.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-22  
 
About the HD DVD  
Do not enter Sleep/Hibernation Mode while using DVD MovieFactory.  
Do not operate DVD MovieFactory immediately after turning on the  
computer. Please wait until all Disc Drive activity has stopped.  
When recording to a DV-Camcorder, to ensure you capture all of your  
data, let the camcorder record for a few seconds before you begin  
recording your actual data.  
CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD  
functions are not supported in this version.  
While recording video to DVD or tape, please close all other programs.  
Do not run software like a screen saver because it can put a heavy load  
on the CPU.  
Do not support MP3 decode and encode.  
2. Before recording the video to DVD  
When you record to DVD disc, please use only discs recommended by  
the Drive manufacturer.  
Do not set the working drive to a slow device like a USB 1.1 hard disk  
drive or it will fail to write DVD.  
Do not perform any of the following actions:  
Operate the computer for any other function, including using a  
mouse or TouchPad/Dual Mode Pad or closing/opening the LCD  
panel.  
Bump or cause vibration to the computer.  
Use the Mode control button and Audio/Video control button to  
reproduce music or voice.  
Open the DVD drive.  
Install, remove or connect external devices, including the following:  
SD card, USB devices, external display, i.LINK. devices, optical  
digital devices.  
Please verify your disc after recording important data.  
DVD-R/+R/-RW disc cannot be written in VR format.  
Not support to output VCD or SVCD format.  
3. About Straight to Disc  
Not support to record on DVD-R/+R disc.  
Not support to record DVD+VR format by HDV.  
HDV support to burn DVD-Video only.  
DVD-VR format not support to add Menu.  
4. About recorded DVDs  
Some DVD-ROM drives for personal computers or other DVD players  
may not be able to read DVD-R/+R/-RW/-RAM discs.  
When playing your recorded disc on your computer, please use the  
DVD Video Player.  
If you use an over-used rewritable disc, the full formatting might be  
locked. Please use a brand new disc.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-23  
The Keyboard  
Chapter 6  
The Keyboard  
The computer's keyboard layouts are compatible with a 104/105-key  
enhanced keyboard. By pressing some keys in combination, all the  
104/105-key keyboard functions can be executed on the computer.  
The number of keys on your keyboard depends on which country/region's  
keyboard layout your computer is configured with. Keyboards for numerous  
languages are available.  
There are five types of keys: typewriter keys, numeric keys, function keys,  
soft keys and cursor control keys.  
Typewriter keys  
The typewriter keys, produce the upper- and lower-case letters, numbers,  
punctuation marks, and special symbols that appear on the screen.  
There are some differences, however, between using a typewriter and  
using a computer keyboard:  
Letters and numbers produced in computer text vary in width. Spaces,  
which are created by a space character may also vary depending on  
line justification and other factors.  
The lowercase l (el) and the number 1 (one) are not interchangeable on  
computers as they are on a typewriter.  
The uppercase O (oh) and the 0 (zero) are not interchangeable.  
The Caps Lock function key locks only the alphabetic characters in  
uppercase while the shift lock on a typewriter places all keys in the  
shifted position.  
The Shift keys, the Tab key, and the Back Space key perform the  
same function as their typewriter counterparts but also have special  
computer functions.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-1  
       
The Keyboard  
F1 … F12 function keys  
The function keys, not to be confused with Fn, are the 12 keys at the top of  
your keyboard. These keys are dark gray, but function differently from the  
other dark gray keys.  
F1 through F12 are called function keys because they execute  
programmed functions when pressed. Used in combination with the Fn key,  
keys marked with icons execute specific functions on the computer. See  
the section, Soft keys: Fn key combinations, in this chapter. The function  
executed by individual keys depends on the software you are using.  
Soft keys: Fn key combinations  
The Fn (function) is unique to TOSHIBA computers and is used in  
combination with other keys to form soft keys. Soft keys are key  
combinations that enable, disable or configure specific features.  
Some software may disable or interfere with soft-key operations. Soft-key  
settings are not restored by the Sleep feature.  
Emulation keys  
Your software may require you to use keys that the keyboard does not  
have. Pressing the Fn key and one of the following keys simulates the  
enhanced keyboard's functions.  
Press Fn + Enter to simulate Enter on the enhanced keyboard's numeric  
keypad.  
Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-2  
   
The Keyboard  
Hotkeys  
Fn + ESC  
Volume Mute – Turns the volume on and off.  
Fn + F1  
Instant Security – Enters screen saver mode and  
blanks the screen. To restore your desktop, press  
any key or use the TouchPad/Dual Mode Pad.  
Fn + F2  
Fn + F3  
Fn + F4  
Fn + F5  
Power Save Modes – Displays the power save  
modes and lets you change the power settings  
Sleep – This hot key switches the system to  
Sleep mode.  
Hibernate – This hot key switches the system to  
Hibernate mode.  
Display Selection – Changes displays.  
Default resolution for simultaneous mode is set to WXGA+ (1440 × 900). If  
you connect an RGB (Monitor) that is not WXGA+, change it in "Control  
Panel/Personalization/Display settings".  
Fn + F6  
Fn + F7  
Fn + F8  
Brightness Down  
Brightness Up  
Wireless Device Controls – Pressing this hot  
key allows you to switch between active wireless  
devices if the wireless communication switch is  
switched on.  
Fn + F9  
TouchPad/Dual Mode Pad On/Off  
Fn + Space  
Change Resolution – Cycles sequentially from  
the current resolution to 800 × 600 to 1024 × 768  
and back again to the original resolution.  
Zoom Out To reduce the icon size on the  
desktop or the application window, press the 1 key  
while holding down the Fn key.  
Fn + 1  
Zoom In To enlarge the icon size on the  
desktop or the application window, press the 2 key  
while holding down the Fn key.  
Fn + 2  
Before using Fn + 1 and Fn + 2, you must install the TOSHIBA Zooming  
Utility. Please be aware that this 'zooming' function is only available within  
Microsoft Internet Explorer, Microsoft Office, Windows Media Player and  
Adobe Reader, and for the icons on the desktop.  
User’s Manual  
6-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Keyboard  
Windows special keys  
The keyboard provides two keys that have special functions in Windows  
Vista. One activates the Start menu and the other has the same function as  
the secondary mouse button.  
This key activates the Windows Vista™ Start menu  
This key has the same function as the Right mouse button.  
Number Pad  
The number pad is activated by pressing the Num Lock key, the LED will  
appear when active. Use the keypad to type numbers and generate ASCII  
charcters.  
Generating ASCII characters  
Not all ASCII characters can be generated using normal keyboard  
operation. But, you can generate these characters using their ASCII codes.  
With the Num lock on:  
1. Hold down Alt.  
2. Using the number pad keys, type the ASCII code.  
3. Release Alt, and the ASCII character appears on the display screen.  
With the Num Lock off:  
1. Hold Alt + Fn.  
2. Using the number pad keys, type the ASCII code.  
3. Release Alt + Fn, and the ASCII character appears on the display  
screen.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-4  
       
Power and Power-Up Modes  
Chapter 7  
Power and Power-Up Modes  
The computer's power resources include the AC adapter and internal  
batteries. This chapter gives details on making the most effective use of  
these resources including charging and changing batteries, tips for saving  
battery power, and power up modes.  
Power conditions  
The computer's operating capability and battery charge status are affected  
by the power conditions: whether an AC adapter is connected, whether a  
battery is installed and what the charge level is for the battery.  
Power on  
Power off (no operation)  
AC adapter Battery fully  
• Operates  
• No charge  
connected  
charged  
• No charge  
• LED: Battery blue  
DC IN blue  
• LED: Battery blue  
DC IN blue  
Battery partially • Operates  
• Charge  
charged  
• Charge  
• LED: Battery Amber  
DC IN blue  
• LED: Battery Amber  
DC IN blue  
• Operates  
No battery  
installed or no  
charge  
• No charge  
• No charge  
• LED: Battery off  
DC IN blue  
• LED: Battery off  
DC IN blue  
User’s Manual  
7-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Power and Power-Up Modes  
Power on  
Power off (no operation)  
AC adapter Battery capacity • Operates  
notconnected is above low  
• LED: Battery off  
battery trigger  
point  
DC IN off  
Battery capacity • Operates  
is below low  
• Alarm sounds (this  
function depends on how  
the computer is  
battery trigger  
point  
configured)  
• LED: Battery flashes  
Amber  
DC IN off  
Battery capacity Computer goes into  
exhausted  
Hibernation or shuts down  
(depending on the  
TOSHIBA Power Saver  
setting)  
No battery  
installed  
• No operation  
• LED: Battery off  
DC IN off  
* The LED is dependent on the model you purchased.  
Power indicators  
As shown in the above table, the Battery, DC IN and Power indicators alert  
you to the computer's operating capability and battery charge status  
Battery indicator  
Check the Battery indicator to determine the status of the battery. The  
following indicator lights indicate the battery status.  
Flashing Amber  
The battery charge is low. The AC adapter must  
be connected to recharge the battery  
Amber  
Indicates the AC adapter is connected and is  
charging the battery.  
Blue  
Indicates the AC adapter is connected and the  
battery is fully charged.  
No light  
Under any other conditions, the indicator does  
not light.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-2  
 
Power and Power-Up Modes  
DC IN indicator  
Check the DC IN indicator to determine the power status with the AC  
adapter connected:  
Blue  
Indicates the AC adapter is connected and is  
correctly supplying power to the computer.  
No light  
Indicates the AC adapter is not connected.  
Power indicator  
Check the Power indicator to determine the power status with the AC  
adapter connected:  
Blue  
Indicates power is being supplied and the  
computer is turned on.  
Power indicator is located inside of the Power  
Button (depending the model you purchased)  
and in the front of the computer.  
Blinking Amber  
No light  
Indicates power is being supplied to the  
computer while the computer is in Sleep mode.  
Under any other conditions, the indicator does  
not light.  
Battery types  
The computer has two types of batteries:  
Battery pack  
Real Time Clock (RTC) battery  
Battery pack  
When the AC adapter is not connected, the computer's main power source  
is a removable lithium ion battery pack, also referred to in this manual as  
the battery.  
You can purchase additional battery packs for extended use of the  
computer away from an AC power source.  
The battery is a disposable item. When its operation becomes short even  
when fully charged, replace it with a new one.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-3  
 
Power and Power-Up Modes  
The battery pack is a lithium ion battery, which can explode if not  
properly replaced, used, handled or disposed of. Dispose of the battery  
as required by local ordinances or regulations. Use only batteries  
recommended by TOSHIBA as replacements.  
Do not remove the battery pack while the computer is in Sleep Mode. In  
this mode data is stored in memory, so if the computer loses power, it  
will be lost.  
Battery type: 6 cell-PA3536U-1BRS,PA3536U-1BAS  
* The availability of this battery is dependent on the model you purchased.  
Real Time Clock battery  
The Real Time Clock (RTC) battery provides power for the internal real  
time clock and calendar. It also maintains the system configuration.  
If the RTC battery becomes completely discharged, the system loses this  
data and the real time clock and calendar stop working. The following  
message appears when you turn on the power:  
ERROR 0271:Check date and time settings.  
WARNING 0251:System CMOS checksum bad - Default  
configuration used.  
Press <F1> to resume, <F2> to Setup.  
The computer's RTC battery is a lithium battery and should be replaced  
only by your dealer or by a TOSHIBA service representative. The battery  
can explode if not properly replaced, used, handled or disposed of.  
Dispose of the battery as required by local ordinances or regulations.  
When this error appears, the following action is recommended.  
1. Connect the AC adapter and let the battery charge for 24-hours.  
2. Press F2 to enter BIOS setup menu.  
3. Set correct time and date.  
If you still see the error message after performing the above actions,  
please contact your TOSHIBA service representative.  
Care and use of the battery pack  
The battery pack is a vital component of portable computing. Taking proper  
care of it will help ensure longer operating time on battery power as well as  
a longer life for your battery pack. Follow the instructions in this section  
carefully to ensure safe operation and maximum performance.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-4  
 
Power and Power-Up Modes  
Safety precautions  
Mishandling of batteries can cause death, serious injury or property  
damage.  
Carefully observe the following advice:  
Danger: Indicates an imminently hazardous situation, which could result in  
death or serious injury, if you do not follow instructions.  
Warning: Indicates a potentially hazardous situation, which could result in  
death or serious injury, if you do not follow instructions.  
Caution: Indicates a potentially hazardous situation, which if not avoided,  
may result in moderate or minor injury or property damage.  
Note: Provides important information.  
Danger  
1. Never try to dispose of the battery pack by burning or expose it to a  
heating device such as a microwave oven. The battery pack could  
explode and cause bodily injury.  
2. Never try to disassemble, repair or otherwise tamper with a battery  
pack. The battery pack will overheat and ignite. Leakage of caustic  
alkaline solution or other electrolytic substances will cause fire or injury,  
possibly resulting in death or serious injury.  
3. Never short-circuit the battery pack by contacting the terminals with a  
metal object. A short-circuit can cause fire or otherwise damage the  
battery pack and possibly cause injury. To avoid accidental short-circuit,  
always wrap the battery pack in plastic and cover the terminals with  
electrical tape when storing or disposing of the battery pack.  
4. Never puncture the battery pack with a nail or other sharp object. Never  
strike it with a hammer or other object. Never step on it.  
5. Never try to charge the battery pack in any manner other than that  
described in the user's manual. Never connect the battery pack to a  
plug socket or to an automobile's cigarette lighter socket. It may rupture  
or ignite.  
6. Use only the battery pack supplied with the computer or other device or  
an battery pack approved by the computer or device's manufacturer.  
Battery packs have different voltages and terminal polarities. Use of an  
improper battery could cause smoke, fire or rupture of the battery pack.  
7. Never subject a battery pack to heat, such as storage near a heat  
source. Exposure to heat can cause the battery pack to ignite, explode  
or leak caustic liquid and cause death or serious injury. It could also fail  
or malfunction causing data loss.  
8. Never expose the battery pack to abnormal shock, vibration or  
pressure. The battery pack's internal protective device will fail, causing  
it to overheat, explode, ignite or leak caustic liquids possibly resulting in  
death or serious injury.  
9. Never let a battery pack become wet. A wet battery pack will overheat,  
ignite or rupture possibly resulting in death or serious injury.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-5  
Power and Power-Up Modes  
Warning  
1. Never allow caustic electrolyte fluid leaked from a battery pack to  
contact your eyes, skin or clothing. If caustic electrolyte fluid should  
contact your eyes, immediately wash your eyes with large amounts of  
running water and seek medical attention, to help prevent eye damage.  
It electrolyte fluid should contact your skin, immediately wash it under  
running water to prevent rash. If it contacts your clothes, promptly  
remove them to prevent the fluid from contacting your skin or eyes.  
2. Immediately turn off the power, disconnect the AC adapter and remove  
the battery if any of the following events are observed in the battery  
pack: offensive or unusual odor, excessive heat, discoloration or  
deformation. Never use the computer again until it has been checked  
by a TOSHIBA service provider. It might generate smoke or fire, or the  
battery pack might rupture.  
3. Make sure the battery is securely installed in the computer before  
attempting to charge the battery pack. Improper installation could  
generate smoke or fire, or cause the battery pack to rupture.  
4. Keep the battery pack out or reach of infants and children. It can cause  
injury.  
Caution  
1. Never continue to use a battery pack after its recharging capacity has  
become impaired, or after the display of a warning message indicating  
that the battery pack's power is exhausted. Continued use of an  
exhausted or impaired battery pack could cause the loss of data.  
2. Never dispose of battery packs with normal trash. Bring them to your  
TOSHIBA dealer or to another recycling centre to save resources and  
prevent environmental damage. Cover the terminals with electrical tape  
to prevent short-circuits, which could cause the battery pack to ignite or  
rupture.  
3. Use only battery packs recommended by TOSHIBA as replacements.  
4. Always make sure the battery pack is installed correctly and securely.  
Otherwise, a battery pack could fall out and possibly cause injury.  
5. Charge the battery pack only in an ambient temperature between 5 and  
30 degrees Celsius. Otherwise, the electrolyte solution might leak,  
battery pack performance might deteriorate and the battery life might be  
shortened.  
6. Be sure to monitor the remaining battery power. If the battery pack or  
real time clock battery discharge completely, Sleep Mode will not  
function, and data in memory will be lost, and the computer might  
register an incorrect time and date. In this case, connect the AC adapter  
to recharge the batteries.  
7. Never install or remove the battery pack without first turning off the  
power and disconnecting the AC adapter. Never remove the battery  
pack while the computer is in Sleep Mode as data will be lost.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-6  
Power and Power-Up Modes  
Note  
1. Never remove the battery pack while the Wake-up on LAN function is  
enabled. Data will be lost. Before you remove a battery pack, disable  
the Wake-up on LAN function.  
2. To ensure the battery pack maintains maximum capacity, operate the  
computer on battery power once a week until the battery pack is fully  
discharged. Refer to the section Extending battery life in this chapter for  
procedures. If the computer is continuously operated on AC power for  
an extended period, more than a week, the battery might fail to retain a  
charge. It might not function efficiently over the expected life of the  
battery pack and the Battery indicator might not indicate a low-battery  
condition.  
3. After the battery pack is charged, avoid leaving the AC adapter  
connected and the computer turned off for more than a few hours at a  
time. Continuing to charge a fully charged battery pack can damage the  
battery.  
Charging the batteries  
When the power in the battery pack becomes low, the Battery indicator  
flashes amber indicating that only a few minutes of battery power remain. If  
you continue to use the computer while the Battery indicator flashes, the  
computer enables Hibernation mode (so you don't lose data) and  
automatically turns off.  
You must recharge a battery pack when it becomes discharged.  
Procedures  
To recharge a battery pack while it is installed in the computer, connect the  
AC adapter to the DC IN socket and plug the other end into a working  
outlet.  
The Battery indicator glows amber when the battery is being charged.  
Use only the computer connected to an AC power source to charge the  
battery pack. Do not attempt to charge the battery pack with any other  
charger.  
Time  
The following table shows the time required to fully charge a discharged  
battery.  
Charging time (hours)  
Battery type  
Battery pack  
RTC battery  
Power on  
Power off  
about 12 or longer  
about 24  
about 4 or longer  
about 24 with AC or  
Battery pack  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-7  
Power and Power-Up Modes  
The charging time when the computer is on is affected by ambient  
temperature, the temperature of the computer and how you use the  
computer.  
If you make heavy use of external devices the battery might scarcely  
charge at all during operation. Refer also to the section Maximizing battery  
operating time.  
Battery charging notice  
The battery may not charge right away under the following conditions:  
The battery is extremely hot or cold. To make sure the battery charges  
to its full capacity, charge the battery at room temperature of 10°C to  
30°C (50°F to 86°F).  
The battery is nearly completely discharged. Leave the AC adapter  
connected for a few minutes and the battery should begin charging.  
Once a battery pack is fully charged, it is recommended that you operate  
the computer only on battery power until the battery pack completely  
discharges. Doing so extends battery life and helps ensure accurate  
monitoring of battery capacity.  
The Battery indicator may show a rapid decrease in battery operating time  
when you try to charge a battery under the following conditions:  
The battery has not been used for a long time.  
The battery has completely discharged and been left in the computer for  
a long time.  
A cool battery is installed in a warm computer.  
In such case, follow the steps below.  
1. Fully discharge the battery by leaving it in the computer with the power  
on until the power automatically shuts off.  
2. Plug in the AC adapter.  
3. Charge the battery until the Battery indicator glows blue (depending the  
model you purchased).  
Repeat these steps two or three times until the battery recovers normal  
capacity.  
Leaving the AC adapter connected will shorten battery life. At least once a  
week, run the computer on battery power until the battery is fully  
discharged, then recharge the battery.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-8  
Power and Power-Up Modes  
Monitoring battery capacity  
Remaining battery power can be monitored using the following methods.  
Clicking the battery icon on the task bar  
Via the Battery Stats in the Windows Mobility Center Window  
You should wait at least 16 seconds after turning on the computer  
before trying to monitor the remaining operating time. This is because  
the computer needs this time to check the battery’s remaining capacity  
and then calculate the remaining operating time, based on this together  
with the current power consumption.  
Please be aware that the actual remaining operation time may differ  
slightly from the calculated time.  
With repeated discharges and recharges, the battery's capacity will  
gradually decrease. In view of this it will be noted that an often used, older  
battery will not operate for as long as a new battery even when both are  
fully charged.  
Maximizing battery operating time  
A battery's usefulness depends on how long it can supply power on a  
single charge.  
How long the charge lasts in a battery depends on:  
How you configure the computer (for example, whether you enable  
battery power saving options). The computer provides a battery save  
mode to conserve battery power. This mode has the following options:  
Display auto off  
Hard Disk Drive auto off  
System auto off  
LCD brightness.  
How often and how long you use the hard disk, optical media drive and  
the disk drive (if one is connected).  
How much charge the battery contained to begin with.  
Enabling Sleep Mode or Hibernation Mode conserves battery power if  
you are frequently turning the computer off and on.  
Where you store your programs and data.  
Closing the display when you are not using the keyboard saves power.  
Operating time decreases at low temperatures.  
The condition of the battery terminals. Make sure the battery terminals  
stay clean by wiping them with a clean dry cloth before installing the  
battery pack.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-9  
Power and Power-Up Modes  
Retaining data with power off (sleep mode)  
When you turn off your computer with fully charged batteries, the batteries  
retain data/charge for the following approximate time periods:  
Battery  
Approximately 1 days (Sleep mode,6-cell)  
Approximately 1 month (Shut down mode, all  
type of battery packs)  
RTC battery  
Approximately 1 month  
* The availability of this battery is dependent on the model you purchased.  
Extending battery life  
To maximize the life of your battery pack:  
If you have extra battery packs, rotate their use.  
If you will not be using the system for an extended period, remove the  
battery pack.  
Store spare battery packs in a cool dry place out of direct sunlight.  
Replacing the battery pack  
When the battery pack reaches the end of its operating life you will need to  
install a new one. If the Battery indicator flashes amber shortly after the  
battery has been fully recharged, the battery pack needs to be replaced.  
You might also replace a discharged battery pack with a charged spare  
when you are operating your computer away from an AC power source.  
This section explains how to remove and install the battery pack.  
Removing the battery pack  
To replace a discharged battery pack, follow the steps below.  
When handling battery packs, be careful not to short circuit the  
terminals. Also do not drop, hit or otherwise apply impact; do not  
scratch or break the casing and do not twist or bend the battery pack.  
Do not remove the battery pack while the computer is in Sleep Mode as  
data in memory will be lost.  
1. Save your work.  
2. Turn the computer's power off. Make sure the Power indicator is off.  
3. Remove all cables connected to the computer.  
4. Turn the computer upside down.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-10  
   
Power and Power-Up Modes  
5. Unlock the Battery Pack Lock.  
1
Removing the battery pack-1  
6. Slide the battery pack latch to the left, then pull the battery out of the  
battery bay.  
3
2
Removing the battery pack-2  
Installing the battery pack  
To install a battery pack, follow the steps below.  
The battery pack is a lithium ion battery, which can explode if not properly  
replaced, used, handled or disposed of. Dispose of the battery as required  
by local ordinances or regulations. Use only batteries recommended by  
TOSHIBA as replacements.  
1. Turn the computer's power off.  
2. Disconnect all cables connected to the computer.  
3. Hold the battery pack so that the label faces down and the connectors  
on the battery face the connectors on the computer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-11  
Power and Power-Up Modes  
4. Gently slide the battery into the battery bay until the latch clicks into  
place.  
1
2
Installing the battery pack  
TOSHIBA Password Utility  
The TOSHIBA Supervisor Password Utility provides two levels of password  
security: User and Supervisor.  
Passwords set in TOSHIBA Supervisor Password Utility are different from  
®
the Windows login password.  
User Password  
To start the utility, point to or click the following items:  
Launch TOSHIBA AssistSECUREUser Password  
Registered  
Click to register a password of up to 8 characters. After a password is  
set, you will be prompted to enter it when you start the computer.  
Not Registered  
Click to delete a registered password. Before you can delete a  
password, you must first enter the current password correctly.  
Owner String (text box)  
You can use this box to associate text with the password. After you  
enter text, click Apply or OK, then, each time the computer is switched  
on, this text will be displayed along with the prompt for the password.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-12  
 
Power and Power-Up Modes  
Supervisor password  
If you set a supervisor password, some functions will be restricted when a  
user logs on with the user password. To set a supervisor password:  
TOSHIBA Assist SECURE Supervisor password  
This utility lets you do the following:  
Register or delete the supervisor password.  
Specify restrictions for general users.  
Starting the computer by password  
If you have already registered a password, there is one way to start the  
computer:  
Enter the password manually.  
The password is necessary only if the computer was shut down in boot  
mode, not in Hibernation or Sleep mode.  
To enter a password manually, follow these steps:  
1. Turn on the power as described in Chapter 3, Getting Started. The  
following message will appear in the LCD:  
Enter Password [xxxxxxxx]  
At this point, the hotkeys Fn + F1 to F9 do not work. They will function after  
you enter the password.  
2. Enter the Password.  
3. Press Enter.  
If you enter the password incorrectly three consecutive times, the  
computer shuts down. You must turn on the computer again and re-enter  
the password.  
Power-up modes  
The computer has three power-up modes:  
Hibernation (saves data in memory to the hard disk)  
Sleep (power remains on, maintaining the data in memory, but the CPU  
and all other devices effectively enter a 'sleep' mode)  
Boot (does not save data in memory)  
Refer also to the section Turning on the power in Chapter 3, Getting  
Started.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-13  
 
Power and Power-Up Modes  
Panel power off/on  
This feature makes the computer to enter Hibernation when the display  
panel is closed and turns it back on when the display panel is opened.  
If the panel power off function is enabled and you use Shut down  
Windows, do not close the display until the shut down function is  
completed.  
System automatic Sleep/Hibernation  
This feature automatically turns off the system in Sleep or Hibernation  
mode if the computer is not used for a set duration.  
Refer to Special features, in Chapter 1, P200 Series Features for an  
explanation of how to set the duration.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-14  
   
HW Setup  
Chapter 8  
HW Setup  
This chapter explains how to use the TOSHIBA HW Setup utility to  
configure your computer. TOSHIBA HW Setup lets you configure settings  
for various hardware devices through a number of tabs titled General,  
Password, Display, Boot Priority, Keyboard, CPU, LAN, and USB.  
Accessing HW Setup  
Start All Programs TOSHIBA Utilities HWSetup.  
HW Setup Window  
The HW Setup window contains the following tabs: General, Password,  
Display, Boot Priority, Keyboard, LAN, and USB.  
There are also these three buttons:  
OK  
Accepts your changes and closes the HW Setup  
window.  
Cancel  
Apply  
Closes the window without accepting your  
changes.  
Accepts all your changes without closing the  
HW Setup window.  
General  
This window displays the BIOS version and contains two buttons:  
Default  
Return all HW Setup values to the factory  
settings.  
About  
Display the HW Setup version.  
Setup  
This field displays BIOS Version and date.  
When finish BIOS update, please restart your computer and press F2 into  
BIOS setup manual and load BIOS default one time.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8-1  
         
HW Setup  
Password  
This tab allows you to set or reset the user password for power on.  
Display  
This tab lets you customize your computer's display settings for either the  
internal LCD screen or for an external monitor.  
Power On Display  
This option allows you to select the display to be used when the computer  
is switched on.  
Auto-Selected  
Selects an external monitor if one is connected.  
Otherwise, it selects the internal LCD (Default).  
LCD + Analog RGB  
Selects both the internal LCD and external  
monitor for simultaneous display.  
CPU  
This function lets you set the CPU operating mode.  
This option is displayed only for Core Duo/Solo processor based model.  
Dynamic CPU Frequency Mode  
This option lets you choose from the following settings:  
Dynamically  
Switchable  
CPU power consumption and clock speed  
automatic switching function is enabled. When  
the computer is in use, CPU operation is  
automatically switched when necessary (Default).  
Always Low  
CPU power consumption and clock speed  
automatic switching function is disabled. The  
CPU always runs at low power consumption and  
low speed.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8-2  
HW Setup  
Boot Priority  
Boot Priority Options  
This option sets the priority for booting the computer.  
Select the boot priority from the drop down list.  
You can override the settings and manually select a boot device by  
pressing one of the following keys while the computer is booting:  
U
N
C
Selects the USB floppy disk drive.  
Selects the Network.  
Selects optical device.  
To select the boot drive you want, follow the steps below.  
1. Boot-up your computer and press F12 to enter the boot menu.  
2. The boot select screen will be displayed: HDD1, HDD2, CD/DVD, and  
LAN.  
3. Use the upper/lower cursor keys to highlight the boot device you want  
and press Enter.  
Keyboard  
Wake-up on Keyboard  
When this feature is enabled and the computer is in Sleep mode, you can  
turn on the computer by pressing any key. It is effective only for the internal  
keyboard and only when the computer is in Sleep mode.  
Enabled  
Disabled  
Enables the Wake-up on Keyboard feature.  
Disables the Wake-up on Keyboard function  
(Default).  
USB  
Legacy USB Support  
Use this option to enable or disable legacy USB support. If your operating  
system does not support USB, you can still use a USB mouse, keyboard,  
and floppy disk drive by setting the Legacy USB Support option to enable.  
Enabled  
Disabled  
Enables Legacy USB Support.  
Disables Legacy USB Support.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8-3  
HW Setup  
LAN  
Wake-up on LAN  
This feature lets the computer's power be turned on when it receives a  
wake-up signal from the LAN.  
Enabled  
Disabled  
Enables Wake-up on LAN.  
Disables Wake-up on LAN (Default).  
The Wake-up LAN function is not supported on battery power in Hibernate/  
Power off mode, before you plan to use this function please make sure  
your AC power source is properly connected to the system.  
Do not install or remove an optional memory module while Wake-up on  
LAN is enabled.  
Built-in LAN  
This feature enables or disables the Built-in LAN.  
Enabled  
Disabled  
Enables Built-in LAN function (Default).  
Disables Built-in LAN function.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8-4  
Optional Devices  
Chapter 9  
Optional Devices  
Optional devices can expand the computer's capabilities and its versatility.  
This chapter describes connection or installation of the following types of  
devices, which are available from your TOSHIBA dealer:  
Cards/Memory  
Express Card  
SD (Secure Digital) / SDHC(Secure Digital High Capacity) / MMC  
(Multi Media Card) / MS (Memory Stick) /MS Pro (Memory Stick Pro) /  
xD (xD-Picture Card) cards  
Memory modules  
Power devices  
Battery pack  
AC adapter  
Peripheral devices  
External monitor  
Television  
i.LINK (IEEE1394a)  
Security lock  
HDMI V1.2  
Express Card  
The computer (depending on the model) is equipped with an Express Card  
expansion slot that can accommodate two standard module formats; an  
Express Card/34 module and an Express Card/54 module. An Express  
Card module is a small, modular add-in card technology based on PCI  
Express and Universal Serial Bus (USB) interfaces.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-1  
       
Optional Devices  
Installing an Express Card  
One Express Card connector is located on the right side of the computer.  
The computer's hot-install feature lets you install Express Card while the  
computer's power is on.  
To install an Express Card, follow the steps below.  
1. Insert the Express Card.  
2. Press gently to ensure a firm connection.  
Installing an Express Card  
After installing the card, refer to the card's documentation and check the  
configuration in Windows to make sure it is appropriate for your card.  
Removing an Express Card  
1. Click the Safety Remove Hardware icon on the Task Bar.  
2. Click the Express Card you want to remove.  
3. Press the Express Card once to extend it.  
4. Grasp the extended Express Card, and remove it.  
Removing an Express Card  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-2  
Optional Devices  
SD/SDHC/MMC/MS/MS Pro/xD Memory cards  
The computer is equipped with a multiple digital media card slot that can  
accommodate SD/SDHC/MMC/MS/MS Pro/xD memory cards. These  
memory cards let you easily transfer data from devices, such as digital  
cameras and Personal Digital Assistants, which use flash-memory.  
Card Type  
SD  
Capacities  
up to 2 GB  
SDHC  
MMC  
MS  
4 GB  
up to 1 GB  
up to 128 MB, 256 MB (128 MB × 2, selectable)  
MS Pro  
xD  
up to 2 GB  
up to 2 GB  
Keep foreign objects out of the memory card slot. A pin or similar object  
can damage the computer's circuitry.  
®
Do not format a memory card with Windows as it might result in that card  
not being able to be used with some peripheral devices.  
The Logo of SD memory card is  
.
The Logo of SDHC memory card is  
.
The card is designed so that it can be inserted only one way. Do not try to  
force the card into the slot.  
Memory Stick Duo/PRO Duo and the Memory Stick adaptor are not  
compatible with the Multiple Digital Media Card slot. Do not insert Memory  
Stick Duo/PRO Duo into the slot. Data may be lost or damaged if you use  
any card other than those supported.  
For more details on using memory cards, see manuals accompanying the  
cards.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-3  
 
Optional Devices  
Installing a memory card  
To install a memory card:  
1. Insert the memory card.  
2. Press gently to ensure a firm connection.  
Inserting a memory card  
Make sure the memory card is oriented properly before you insert it.  
®
If Windows fails to read the card, remove it then re-insert it.  
The multiple digital media card slot only accepts one type of card at a time.  
Do not attempt to install more than one card as you risk damaging either  
the cards themselves or the computer.  
Removing a memory card  
To remove a memory card, follow the steps below:  
1. Click the Safely Remove Hardware icon on the Taskbar.  
2. Select a device, then click the Stop button. A confirmation dialog may  
appear, depending on how the device is registered with the system; if  
so, confirm that you want to remove the device.  
3. Gently press the memory card inside the socket to eject it.  
4. Grasp the card and remove it.  
Removing a memory card  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-4  
Optional Devices  
Make sure the memory card indicator is out before you remove the  
card or turn off the computer's power. If you remove the card or turn off  
the power while the computer is accessing the card you may lose data  
or damage the card.  
Do not remove the card while the computer is in Sleep or Hibernation  
mode. The computer could become unstable or data in the memory  
card could be lost.  
Do not turn off or place the computer into either Sleep Mode or  
Hibernation Mode while data is being transferred to or from the memory  
card. The system may become unstable or data in the memory card  
may be lost.  
Memory card care  
Set the write-protect switch to the lock position, if you do not want to record  
data.  
1. Do not write to a memory card if the battery power is low. Low power  
could affect writing accuracy.  
2. Do not remove a memory card while read/write is in progress.  
3. The memory card is designed so that it can be inserted only one way.  
Do not try to force the card into the slot.  
4. Do not leave a memory card partially inserted in the slot. Press the  
memory card until you hear it click into place.  
5. Do not twist or bend memory cards.  
6. Do not expose memory cards to liquids or store in humid areas or lay  
media close to containers of liquid.  
7. After using a memory card, return it to its case.  
8. Do not touch the metal part or expose it to liquids or let it get dirty.  
Memory expansion  
You can install additional memory in the computer's memory module socket  
to increase the amount of RAM. This section describes how to install and  
remove a memory module.  
Before you install or remove a memory module, turn off the computer  
with the Shut Down option in the Windows Start menu. If you install or  
remove a memory module while the computer is in Sleep or  
Hibernation mode, data will be lost.  
Some memory modules can be physically installed but are not  
compatible with the computer. In this case the computer will issue a  
warning.  
CAUTION: If you want to upgrade system memory, you should only use  
certified modules. Ask your vendor or check the TOSHIBA web site for a  
list of approved memory products.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-5  
   
Optional Devices  
Insert the two memory modules of the same specifications and capacity  
into Slot A (Upper) and Slot B (Bottom) respectively. The computer will  
operate in dual channel mode.  
You can access the inserted memory modules efficiently in dual channel.  
Point to note about Memory Module Error  
If you install a memory module that is not compatible with the computer, the  
Power indicator will flashes (on for 0.5 seconds, off for 0.5 seconds) in the  
following ways:  
If there is only an error in Slot A: repeatedly flashes orange twice, then  
blue.  
If there is only an error in Slot B: repeatedly flashes orange, then blue  
twice.  
If there is an error in Slot A and in Slot B: repeatedly flashes orange  
twice, then blue twice.  
In all instances you should shut down the computer and remove the  
incompatible module(s).  
Installing Memory on Bottom Side  
If you use the computer for a long time, the memory modules will become  
hot. In this case, let the memory modules cool to room temperature before  
you replace them.  
Follow these steps to install a memory module:  
1. Set the computer to boot mode and turn off the power.  
Do not try to install a memory module under the following conditions. You  
can damage the computer and the module.  
a. The computer is turned on.  
b. The computer was shut down using the Stand by mode.  
c. Power to the optical disc drive has been turned on by the CD Power  
switch.  
2. Remove all cables connected to the computer.  
3. Turn the computer upside down and remove the battery, refer to  
Chapter 7, Power and Power-Up Modes.  
4. Loosen the one screw securing the memory module socket cover.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-6  
Optional Devices  
5. Slide your fingernail or a thin object under the cover and lift it off.  
Removing the memory module socket cover  
6. Fit the module's connectors into the computer's connectors at about a  
45 degree angle and press the module carefully to ensure a firm  
connection.  
Do not touch the connectors on the memory module or on the computer.  
Debris on the connectors may cause memory access problems.  
7. Push the module down so it lies flat. Latches on either side will click into  
place to secure the module.  
2
1
Installing a module  
8. Seat the cover and secure it with the screw.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-7  
Optional Devices  
9. Replace the battery pack as described in Chapter 7, Power and Power-  
Up Modes.  
10. Turn the power on and make sure the added memory is recognized.  
Removing Memory on Bottom Side  
The Slot A is reserved for main memory, the upper slot. Use the slot B for  
expanded memory, the bottom slot. If only one card is installed, use the  
slot A.  
B
A
If you use the computer for a long time, the memory modules will become  
hot. In this case, let the memory modules cool to room temperature before  
you replace them.  
To remove the memory module, make sure the computer is in boot mode  
then:  
1. Be sure the power is off and all cables are disconnected from the  
computer.  
Do not try to remove a memory module with the computer turned on. You  
can damage the computer and the module.  
2. Turn the computer upside down and remove the battery and loosen the  
screw securing the memory module socket cover.  
3. Slide your fingernail or a thin object under the cover and lift it off.  
4. Push the latches to the outside to release the module. A spring will  
force one end of the module up.  
5. Grasp the module and pull it out.  
Do not touch the connectors on the memory module or on the computer.  
Debris on the connectors may cause memory access problems.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-8  
Optional Devices  
1
Latch  
3
2
Removing the memory module  
6. Seat the cover and secure its screw.  
7. Replace the battery.  
Additional battery pack  
You can increase the portability of the computer with additional battery  
packs. If you're away from an AC power source and your battery runs low,  
you can replace it with a freshly charged battery. See Chapter 7, Power and  
Power-Up Modes.  
Additional AC adapter  
If you frequently carry the computer to different sites such as your home  
and office, having an AC adapter at each location reduces the weight and  
bulk of your load.  
External monitor  
An external analog monitor can be connected to the external monitor port  
on the computer.  
To connect a monitor, follow the steps below.  
1. Turn the computer off.  
2. Connect the monitor to the external monitor port.  
3. Turn the monitor's power on.  
4. Turn the computer on.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-9  
     
Optional Devices  
When you turn on the power, the computer automatically recognizes the  
monitor.  
To change the display settings, press Fn + F5. If you disconnect the  
monitor before you turn the computer off, be sure to press Fn + F5 to  
switch to the internal display. Refer to Chapter 6, The Keyboard, for details  
on using hot keys to change the display settings.  
Television  
A television can be connected to the video out port on the computer.  
To connect a television, follow the steps below.  
1. Turn the computer off.  
2. Use a video cable (not supplied) to connect the television to the video  
out port.  
3. Turn the television on.  
4. Turn the computer on.  
You can use the hotkeys Fn + F5 or use the TV-Out button to change the  
display device. Refer to Chapter 6, The Keyboard.  
If a television is connected to the computer, set the TV type in Display  
Properties. Follow the steps below, based on the configuration of your  
computer:  
For ATI Mobility Radeon™ HD2400/HD2600*  
1. Click Start Control Panel Personalization.  
2. Choose Display Settings to change resolution and colors.  
3. Click Start and All Programs.  
4. Click Catalyst Control Center  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-10  
 
Optional Devices  
5. Select CCC.  
6. In Catalyst Control Center window, setup your television or CRT and  
Notebook displays.  
* The availability of this feature is dependent on the model you purchased.  
HDMI  
A HDMI monitor can be connected to the HDMI out put on the computer. To  
connect monitor, follow the steps as detailed below:  
As the port operation of all HDMI (High-Definition Multimedia Interface)  
monitors has not be confirmed, some HDMI monitors may not function  
properly.  
1. Click Start and click All Programs.  
2. Click Catalyst Control Center.  
3. Select CCC.  
4. If you find Catalyst Control Center - Basic View, select Advanced then  
click Next.  
5. At Catalyst Control Center windows, select Displays Manager from left  
select panel.  
User’s Manual  
9-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Optional Devices  
6. Click Desktop Area and Refresh Rate to select the one of below  
format which is supported on this platform.  
Country/Region  
Signal Format*  
1080i HDTV  
720p HDTV  
576p EDTV  
480p EDTV  
Any  
Any  
Any  
Any  
* Lists the actual Signal Formats supported by the HDMI monitor you are  
using.  
7. Click Apply button.  
Above operation is the way to select Desktop Area and Refresh Rate  
format directly. The resolution also can be selected on Display Manager  
Tab.  
Connecting the HDMI out port  
1. Plug one end of the HDMI out cable into the HDMI out port of the HDMI  
device.  
2. Plug one end of the HDMI out cable into the HDMI out port on your  
computer.  
HDMI out port  
Connecting the HDMI out port  
Settings for display video on HDMI  
To view video on the HDMI device, be sure to configure the following  
settings otherwise you may find that nothing is displayed.  
End user refer page 8-9 and Appendix B-6, for more detail, to out put HDMI  
device.  
Be sure to use the Fn + F5 HotKey to select the display device before  
starting to play video. Do not change the display device while playing  
video.  
Do not change the display device under the following conditions.  
While data is being read or written.  
While communication is being carried out.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-12  
Optional Devices  
Settings for audio on HDMI  
To set the audio device to use the HDMI, follow the steps below.  
1. Go to Start then select Control Panel.  
2. Click Hardware and Sound then select Sound. If you are in control  
panel classic view, select Sound directly.  
3. In Sound window, select Digital Output Device (HDMI) then click Set  
Default once.  
Selecting Audio HDMI output  
Please follow above steps to change back to speakers after you plug out  
HDMI connector.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-13  
Optional Devices  
Remote Controller  
Pause  
Record  
Play  
Access indictor  
Power  
Stop  
Fast Forward  
Rewind  
Replay  
Back  
Skip  
Start  
More Info  
OK  
Arrows  
Mute  
Volume +  
Volume -  
Guide  
Channel/Page  
Live TV  
DVD Menu  
Numbers  
Recorded TV  
Clear  
Teletext  
Red  
Enter  
Blue  
Yellow  
Green  
Remote Cotroller  
User’s Manual  
9-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Optional Devices  
Power  
Starts or terminates the operating system.  
This button functions like the Power button of your  
computer. By default, the Sleep Mode is  
equivalent to the Power Off state of your  
computer. To change the setting, click Start ꢀ  
Control Panel System and Maintenance ꢀ  
Power Options. The following 4 options are  
available: Do nothing, Sleep, Hibernation, and  
Shut down.  
Access indicator  
Record  
This indicator will glow while the Remote  
Controller is sending signals to the computer.  
Please note that this indicator will not light after  
the battery has been completely discharged.  
Records the selected television program and  
store it on your hand disk drive.  
Stop  
Stops the media currently playing.  
Pause  
Pauses an audio or video track, and live or  
recorded TV programs.  
Play  
Plays the selected media.  
REW (Rewind)  
Moves the media (video, DVD, music, and so on)  
backwards.  
FWD (Fast Foward)  
Replay  
Moves the media (video, DVD, music, and so on)  
forwards.  
Moves the media backwards (seven seconds for  
videos and live TV, one music track or one DVD  
chapter at a time).  
Skip  
Moves the media forwards (30 seconds for videos  
and live TV, one music track or one DVD chapter).  
Back  
Displays the previous window.  
More Info  
The button provides more details on a TV  
program than is listed in the Guide.  
Arrows  
OK  
Moves the cursor to navigate within Media Center  
windows.  
Selects the desired action or window option. It  
acts like the ENTER Key. if watching TV in full  
screen mode, pressing OK switches back to the  
previous viewed channel. Press again to toggle  
back. It acts the same way as a Jump button on  
some TV remote controls.  
OK  
Volume +  
Increases the volume while watching TV, viewing  
DVD’s or replaying CD’s.  
User’s Manual  
9-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Devices  
Volume -  
Start  
Decreases the volume while watching TV, viewing  
DVD’s or replaying CD’s.  
Opens Media Center to the main window.  
Channel/Page up (+) Changes the TV channel or moves a page up and  
and down (-)  
down, depending on the available options.  
Mute  
Turns your computer sound off.  
Recorded TV  
Guide  
Allows you to start recording of TV programs. The  
Recorded TV feature of Media Center will be  
activated.  
Opens the Television Program Guide to display  
available TV channels and programs to watch  
and record.  
Live TV  
A shortcut to the full screen view. It also takes you  
to the current point in a live TV program after  
pausing live TV.  
DVD Menu  
Numbers  
Opens the main menu on a DVD movies, if  
avaiable.  
Allows you to select a channel or chapter number  
while watching TV, or CD/DVD replay.  
Numbers, letters or symbols can be entered.  
To select a channel or chapter number of two or  
more digits, press the number sequentially. For  
example, press the "1" button and then the "0"  
button to select the number 10.  
Clear  
Enter  
Deletes entered numbers, letters or symbols.  
The OK button on the Remote Controller has the  
same functions.  
Red, Green, Yellow  
and Blue buttons  
It jumps to a registration link.  
These buttons are not provided with some  
models.  
Teletext  
Starts or terminates the Teletext mode.  
This button is not provided with some models.  
Using the Remote Controller  
This computer includes a remote control unit, which allows you to control  
some of your computers from distant location.  
The Remote Controller is designed specially for this computer.  
Some application programs may not support remote control functions.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-16  
 
Optional Devices  
Operational range of the Remote Controller  
Point the Remote controller at your computer and press a button. The  
operational angle and distance are described below.  
Distance  
Angle  
Within 5 m from the infrared receiver window.  
Within a 30 degree horizontal and 15 degree  
vertical range oof the infrared receiver window.  
30 degrees  
Infrared receiver  
window  
15 degrees  
(vertically)  
30 degrees  
15 degrees  
(vertically)  
5 m  
Remote Controller  
* The appearance of the provided Remote Controller may vary from model  
to model.  
Operation range of the remote control  
Even if within the effective scope as described above, the remote control  
may malfunction or not work correctly in the following cases.  
When an obstacle stands between the infrared receiver window or your  
computer and the Remote Controller.  
When direct sunlight or strong fluorescent light strikes the infrared  
receiver window.  
When the infrared receiver window or the infrared emission part of the  
Remote Controller is dirty.  
When other computers which use an infrared remote controller are  
used near to your computer.  
When a low battery condition is present.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-17  
Optional Devices  
Installing/Removing batteries  
Be sure to install the dry batteries provided with this product using the  
Remote Controller.  
The procedures for installing and removing the bateries vary depending on  
the type of the Remote Controller. Check the type and then install or  
remove the bateries as instructed.  
Store the battery for the remote control beyond the reach of children.  
If a child swallows a battery, this might result in chocking. If it happens,  
contact a doctor immediately.  
Observe the following precautions when using the battery of the Remote  
Controller.  
Do not use batteries other than those specified.  
Ensure that you insert the batteries with their polarities correctly  
aligned (+ or -).  
Do not recharge, heat, disassemble or shot the battery, or put it into a  
fire or flame.  
Do not use a battery whose ‘recommended expiration date’ has been  
reached, or is completely discharged.  
Do not use different type of battery or old and new batteries at the  
same time.  
Do not carry the battery together with metal necklaces, hairpins or  
other metal accessories.  
When storing or disposing of used batteries, make sure to put some  
insulation tape on their terminal (+ and -) to avoid short-circuits.  
If these precausions are not followed, heating, fluid leakage or explosion  
may occur. This may cause bums or personal injury. If battery fluid gets on  
your skin or clothes, wash immediately with clean water. If battery fluid  
gets in your eyes, rinse your eyes with clean water immediately and see a  
doctor. Do not touch the battery fluid on instruments or devices with bare  
hands. Wipe off with a cloth or paper towel.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-18  
 
Optional Devices  
Type of battery that can be used for the Remote Controller  
When batteries shipped with the Remote Controller are discharged, replace  
them with commercially available AA manganese batteries or AA alkaline  
batteries. Other types or battery should not be used.  
Installing the batteries  
1. open the battery cover on the back of the Remote Controller. Slide the  
Cover in the direction of the arrow to remove the cover.  
Battery cover  
Opening the battery cover  
2. Insert the batteries in place. Be sure to place the batteries with their  
polarities (+ and -) in the correct position.  
Batteries  
+
-
Inserting the batteries  
3. Close the battery cover. Close the cover securely until it clicks.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-19  
Optional Devices  
Battery cover  
Closing the battery cover  
Replacing the batteries  
When the batteries in ther Remote Controller reach the end of their life, the  
Remote Controller may not operate correctly or work only within a short  
distance from your computer. In this instance, you should purchase new  
batteries and replace the discharged ones.  
1. Open the battery cover on the back of the Remote Controller.  
2. Replace the batteries. Be sure to place the batteries with their polarities  
(+ and -) in the correct position.  
Batteries  
+
-
Removing the batteries  
3. Close the battery cover. Close the cover securely until it clicks.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-20  
Optional Devices  
i.LINK (IEEE1394a)  
i.LINK (IEEE1394a) is used for high-speed data transfer for a range of  
compatible devices such as:  
Digital video cameras  
Hard disk drives  
MO drives  
Optical disc drives  
i.LINK uses a four-pin connector, which does not carry electric current.  
External devices will need their own power supply.  
Precautions  
Make a back-up of your data before transferring it to the computer.  
There is a possibility that the original data will be damaged. There is a  
particular risk that some frames will be deleted in the case of digital  
video transfer.  
Do not transfer data in areas where static electricity is easily generated  
or in areas subjected to electronic noise. Data can be destroyed.  
If you are transferring data through an IEEE1394a hub, do not connect  
or disconnect other devices from the hub during data transfer. There is  
a likelihood that data will be damaged. Connect all devices to the hub  
before you turn on the computer's power.  
Connecting  
1. Make sure the connectors are properly aligned and plug the i.LINK  
(IEEE1394a) cable into the computer.  
2. Plug the other end of the cable into the device.  
Note the following when you use i.LINK:  
You may need to install drivers for your i.LINK devices.  
Not all i.LINK devices have been tested. Therefore, compatibility with all  
i.LINK devices cannot be guaranteed.  
Use S100, S200 or S400 cables no longer than three meters.  
Some devices might not support Sleep or automatic off functions.  
Do not connect or disconnect an i.LINK device while it is using an  
application or when the computer is automatically shutting it down to  
save power. Data might be destroyed.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-21  
 
Optional Devices  
Disconnecting  
1. Click the Safely Remove Hardware icon on the Task Bar.  
2. Point to i.LINK (IEEE1394a) device and click.  
3. Disconnect the cable from the computer then from the i.LINK device.  
Refer also to the documentation that came with your i.LINK device.  
Security lock  
A security lock enables you to anchor your computer to a desk or other  
heavy object to help prevent unauthorized removal of the computer.  
Attach one end of a cable to the desk and the other end to the security lock  
slot on the right side of the computer.  
Security lock  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-22  
 
Troubleshooting  
Chapter 10  
Troubleshooting  
TOSHIBA designed the computer for durability. However, should problems  
occur, following the procedures in this chapter can help to determine the  
cause.  
All readers should become familiar with this chapter. Knowing what might  
go wrong can help prevent problems from occurring.  
Problem solving process  
Resolving problems will be much easier if you observe the following  
guidelines:  
Stop immediately when you recognize a problem exists. Further action  
may result in data loss or damage. You may destroy valuable problem-  
related information that can help solve the problem.  
Observe what is happening. Write down what the system is doing and  
what actions you performed immediately before the problem occurred.  
If you have a printer attached, print a copy of the screen using PRTSC.  
Isolate the problem. Using the tools available to you, such as the  
troubleshooting tips in this chapter, try to discover the specific actions  
that caused the problem.  
The questions and procedures offered in this chapter are meant as a guide,  
they are not definitive problem solving techniques. Many problems can be  
solved simply, but a few may require help from your dealer. If you find you  
need to consult your dealer or others, be prepared to describe the problem  
in as much detail as possible.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-1  
       
Troubleshooting  
Preliminary checklist  
Consider the simplest solution first. The items in this checklist are easy to  
fix and yet can cause what appears to be a serious problem.  
Make sure you turn on all peripheral devices before you turn on the  
computer. This includes your printer and any other external device you  
are using.  
Before you attach an external device, turn the computer off. When you  
turn the computer back on it recognizes the new device.  
Make sure all options are set properly in the setup program.  
Check all cables. Are they correctly and firmly attached? Loose cables  
can cause signal errors.  
Inspect all connecting cables for loose wires and all connectors for  
loose pins.  
Check that the optical disc drive is correctly inserted.  
Make notes of your observations and keep them in a permanent error log.  
This will help you describe your problems to your dealer. If a problem  
recurs, the log will help you identify the problem faster.  
Analyzing the problem  
Sometimes the system gives clues that can help you identify why it is  
malfunctioning. Keep the following questions in mind:  
Which part of the system is not operating properly: keyboard, disk  
drives, hard disk drive, printer, display. Each device produces different  
symptoms.  
Is the operating system configuration set properly? Check the  
configuration options.  
What appears on the display screen? Does it display any messages or  
random characters? Print a copy of the screen if you have a printer  
attached. Look up the messages in the software and operating system  
documentation. Check that all connecting cables are correctly and  
firmly attached. Loose cables can cause erroneous or intermittent  
signals.  
Do any indicators light? Which ones? What color are they? Do they stay  
on or blink? Write down what you see.  
Do you hear any beeps? How many? Are they long or short? Are they  
high pitched or low? Is the computer making any unusual noises? Write  
down what you hear.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-2  
Troubleshooting  
Record your observations so you can describe them to your dealer.  
Software  
The problems may be caused by your software. If  
you cannot load a software package, the media  
may be damaged or the program might be  
corrupted. Try loading another copy of the  
software.  
If an error message appears while you are using  
a software package, check the software  
documentation. These documents usually include  
a problem solving section or a summary of error  
messages.  
Next, check any error messages in the operating  
system documentation.  
Hardware  
If you cannot find a software problem, check your  
hardware. First run through the items in the  
preliminary checklist above. If you still cannot  
correct the problem, try to identify the source. The  
next section provides checklists for individual  
components and peripherals.  
Hardware and system checklist  
This section discusses problems caused by your computer’s hardware or  
attached peripherals. Basic problems may occur in the following areas:  
System start-up  
Self test  
TV output signal  
LAN  
Power  
Sleep/Hibernation  
Memory expansion  
Modem  
Battery  
Keyboard  
LCD panel  
Hard disk drive  
Password  
i.LINK (IEEE1394)  
Wireless LAN  
Monitor  
DVD Super Multi drive supporting  
double layer disc recording  
HD DVD drive supporting disc  
recording  
Disk drive  
Real Time Clock  
HDMI  
Sound system  
Pointing Device  
USB  
Web Camera  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-3  
 
Troubleshooting  
System start-up  
When the computer does not start properly, check the following items:  
Self Test  
Power Sources  
Power-on Password  
Self test  
When the computer starts up, the self test will be run automatically, and the  
following will be displayed:  
(This screen image is  
one of the examples.  
You may see the  
different screen image  
depending on the  
model you  
purchased.)  
This message remains on the screen for a few seconds.  
If the self test is successful, the computer tries to load the operating system  
based around how the Boot Priority option is set within the computer’s  
BIOS setup.  
If any of the following conditions are present, the self test failed:  
The computer stops and does not proceed to display information or  
messages except the TOSHIBA logo.  
Random characters appear on the screen, and the system does not  
function normally.  
The screen displays an error message.  
Turn off the computer and check all cable connections as well as memory  
module connections. If the test fails again, contact your dealer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-4  
Troubleshooting  
Power  
When the computer is not plugged into an AC outlet, the battery pack is the  
primary power source. However, your computer has a number of other  
power resources, including an intelligent power supply and Real Time  
Clock battery. These resources are interrelated and any one could affect  
apparent power problems. This section provides check lists for AC power  
and the battery. If you cannot resolve a problem after following them, the  
cause could lie with another power resource. In such cases you should  
contact your dealer.  
Overheating power down  
If the computer’s internal temperature becomes too high, the computer will  
automatically shut down  
AC power  
If you have trouble turning on the computer with the AC adapter connected,  
check the DC IN indicator. Refer to Chapter7, Power and Power-Up Modes,  
for more information.  
Problem  
Procedure  
AC adapter doesn't  
power the computer  
Check the connections. Make sure the cord is  
firmly connected to the computer and a power  
(DC IN indicator does outlet.  
not glow blue).  
Check the condition of the cord and terminals. If  
the cord is frayed or damaged, replace it. If the  
terminals are soiled, wipe them with cotton or a  
clean cloth.  
If the AC adapter still does not power the  
computer, contact your dealer.  
User’s Manual  
10-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Battery  
If you suspect a problem with the battery, check the DC IN indicator as well  
as the indicators for the battery. For information on indicators and battery  
operation see Chapter 7, Power and Power-Up Modes.  
Problem  
Battery doesn't power The battery may be discharged. Connect the AC  
the computer. power cord to charge the battery.  
Battery doesn't charge If the battery is completely discharged, it will not  
Procedure  
when the AC power  
cord is attached.  
(Battery indicator does  
not glow amber.)  
begin charging at once. Wait a few minutes.  
If the battery still does not charge, make sure the  
outlet is supplying power. Plug in an appliance  
and see if it works. If it doesn't, try another power  
source.  
Check whether the battery is hot or cold. If the  
battery is too hot or too cold, it will not charge  
properly. Let it reach room temperature.  
Unplug the AC adapter and remove the battery to  
make sure the terminals are clean. If necessary  
wipe them with a soft dry cloth dipped in alcohol.  
Connect the AC adapter and replace the battery.  
Check the Battery indicator. If it does not glow,  
let the computer charge the battery for at least  
20 minutes. If the Battery indicator glows after  
20 minutes, let the battery continue to charge for  
at least another 20 minutes before turning on the  
computer.  
If the indicator still does not glow, the battery may  
be at the end of its operating life.  
Replace it.  
If you do not think the battery is at the end of its  
operating life, see your dealer.  
Battery doesn't power Check the power consumption settings in the  
the computer as long as Power Options. Consider using a power saving  
expected.  
mode.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-6  
Troubleshooting  
Keyboard  
Keyboard problems can be caused by your setup configuration. For more  
information refer to Chapter 6, The Keyboard.  
Problem  
Procedure  
Output to screen is  
garbled.  
Make sure the software you are using is not  
remapping the keyboard. Remapping involves  
reassigning the meaning of each key. See your  
software's documentation.  
If you are still unable to use the keyboard, consult  
your dealer.  
LCD panel  
Problem  
Procedure  
Lines appear broken.  
Check if you are in DOS mode. In DOS, lines  
may appear broken, because of the LCD screen's  
higher resolution. The Windows display should  
appear normal.  
No display.  
Press the Hotkey Fn + F5 to change the display  
priority and ensure it is not set for an external  
monitor.  
Make sure instant security was not activated. Try  
entering your password, if you have one  
registered. Or, turn the power off and back on to  
clear instant security.  
Problems above remain Refer to your software's documentation to  
unresolved or other  
determine if the software is causing the difficulty.  
problems occur.  
Contact your dealer if the problems continue.  
Hard disk drive  
Problem  
Procedure  
Computer does not boot Insert a system disk and reboot.  
from hard drive.  
There may be a problem with your operating  
system files. Refer to your operating system  
documentation.  
Slow performance  
Your files may be fragmented. Run SCANDISK  
and defragmenter to check the condition of your  
files and disk. Refer to your operating system  
documentation or online HELP for information on  
running SCANDISK and the defragmenter.  
Contact your dealer if the problems continue.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-7  
Troubleshooting  
Password  
Problem  
Procedure  
Cannot enter password Refer to Chapter 7, Power and Power-Up Modes.  
i.LINK (IEEE1394)  
Problem  
Procedure  
i.LINK device does not Make sure the cable is securely connected to the  
function  
computer and to the device.  
Make sure the device's power is turned on.  
Reinstall the drivers. Open the Windows Control  
Panel and double-click the Add New Hardware  
icon. Follow the on-screen directions.  
Restart Windows.  
If problems persist, contact your dealer.  
Wireless LAN  
If the following procedures do not restore LAN access, consult your LAN  
administrator. For more information on wireless communication, refer to  
Chapter 4, Operating Basics.  
Problem  
Procedure  
Cannot access Wireless Make sure the computer's wireless  
LAN  
communication switch is set to on.  
Use the ConfigFree program that comes pre-  
installed in your computer to see LAN status.  
If problems persist, consult your LAN  
administrator.  
Monitor  
Refer also to Chapter 9, Optional Devices, and to your monitor’s  
documentation.  
Problem  
Procedure  
Monitor does not turn on Make sure that the external monitor's power  
switch is on. Confirm that the external monitor's  
power cable is plugged into a working power  
outlet.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-8  
Troubleshooting  
Problem  
Procedure  
No display  
Try adjusting the contrast and brightness controls  
on the external monitor.  
Press hotkeys Fn + F5 to change the display  
priority and make sure it is not set for the internal  
display.  
Display error occurs  
Check that the cable connecting the external  
monitor to the computer is attached firmly.  
If problems persist, contact your dealer.  
Monitor goes into  
panning mode  
Check your monitor specification. It might not  
support the selected resolution and refresh rate.  
The resolution on the monitor might go into  
panning mode when wide screen resolution is  
selected. Refer to Appendix B, Display Modes.  
Sound system  
Problem  
Procedure  
No sound is heard  
Adjust the volume control dial.  
Check the software volume settings.  
If appropriate, make sure the headphone  
connection is secure. Check Windows Device  
Manager and ensure the sound function is  
enabled and that settings for I/O address,  
interrupt level and DMA are correct for your  
software and do not conflict with other hardware  
devices that you have connected to the  
computer.  
If problems persist, contact your dealer.  
Pointing device  
If you are using a USB mouse, also refer to the USB section in this chapter  
and to your mouse documentation.  
TouchPad  
Problem  
Procedure  
On-screen pointer does The system might be busy. If the pointer is  
not respond to Pad  
operation  
shaped as an hourglass, wait for it to resume its  
normal shape and try again to move it. You may  
also press Fn + F9 to enable the TouchPad and  
then try again to move it.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-9  
Troubleshooting  
Problem  
Procedure  
Double-tapping does  
not work  
Try changing the double-click speed setting in the  
mouse control utility.  
1. Open the Control Panel, select the Mouse  
icon and press Enter.  
2. Click the Buttons tab.  
3. Set the double-click speed as instructed and  
click OK.  
The mouse pointer  
moves too fast or too  
slow  
Try changing the speed setting in the mouse  
control utility.  
1. Open the Control Panel, select the Mouse  
icon and press Enter.  
2. Click the Pointer Options tab.  
3. Set the speed as instructed and click OK.  
If problems persist, contact your dealer.  
USB mouse  
Problem  
Procedure  
On-screen pointer does The system might be busy. If the pointer is  
not respond to mouse shaped as an hourglass, wait for it to resume its  
movement  
normal shape and try again to move it.  
Make sure the mouse is properly connected to  
the USB port.  
Double-clicking does  
not work  
Try changing the double-click speed setting in the  
mouse control utility.  
1. Open the Control Panel, select the Mouse  
icon and press Enter.  
2. Click the Buttons tab.  
3. Set the double-click speed as instructed and  
click OK.  
The mouse pointer  
moves too fast or too  
slow  
Try changing the speed setting in the mouse  
control utility.  
1. Open the Control Panel, select the Mouse  
icon and press Enter.  
2. Click the Pointer Options tab.  
3. Set the speed as instructed and click OK.  
The mouse pointer  
moves erratically  
The mouse might be dirty. Refer to your mouse  
documentations for instructions on cleaning.  
If problems persist, contact your dealer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-10  
Troubleshooting  
USB  
Refer also to your USB device’s documentation.  
Problem  
Procedure  
USB device does not  
work  
Check for a firm cable connection between the  
USB ports on the computer and the USB device.  
Make sure the USB device drivers are properly  
installed. Refer to your Windows documentation  
for information on checking the drivers.  
If problems persist, contact your dealer.  
TV output signal  
Problem  
Procedure  
Display on TV is poor  
Make sure the TV type is correct for your area:  
NTSC (US) or PAL (Europe).  
No display  
Try adjusting the contrast and brightness controls  
on the external monitor.  
Press hotkeys Fn + F5 to change the display.  
Refer to Chapter 6, The Keyboard.  
If problems persist, contact your dealer.  
If you turn the computer off in Sleep Mode while the display is on a TV, the  
computer will select either the internal LCD or an external computer CRT  
as the display device the next time it is switched on.  
LAN  
Problem  
Procedure  
Cannot access LAN or Check for a firm cable connection between the  
the Wake up on LAN  
feature does not work  
LAN hub.  
Make sure the AC adapter is connected. You  
cannot access a LAN using the computer's  
battery power.  
If problems persist, consult your LAN  
administrator.  
User’s Manual  
10-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Sleep/Hibernation  
Problem  
Procedure  
Is Windows Media Player open? The system  
The system will not  
enter Sleep/Hibernation might not enter Sleep/Hibernation, if Windows  
Media Player is either playing a selection or  
finished playing a selection. Close Windows  
Media Player before you select Sleep/  
Hibernation.  
If problems persist, contact your dealer.  
Memory expansion  
Refer also to Chapter 9, Optional Devices, for information on installing  
memory modules.  
Problem  
Procedure  
The computer hangs up Make sure the memory module installed in the  
and issues beep  
expansion slot is compatible with the computer.  
sounds. (A long beep,  
three short beeps, three  
short beeps, and then a  
long beep.)  
If an incompatible module has been installed,  
follow the steps below.  
1. Turn off the power.  
2. Disconnect the AC adapter and all peripheral  
devices.  
3. Remove the battery pack.  
4. Remove the memory module.  
5. Replace the battery pack and/or connect the  
AC adapter.  
6. Turn on the power.  
If problems persist, contact your dealer.  
Modem  
Problem  
Procedure  
Communication  
Make sure the computer's internal modem  
software can't initialize settings are correct. Refer to Phone and Modem  
the modem Options Properties in the Control Panel.  
You can hear a dial tone If the call is going through a PBX machine, make  
but can't make a call  
sure the communication application's tone dial  
detection feature is disabled.  
You place a call, but a Make sure the settings are correct in your  
connection can't be  
made  
communications application.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-12  
Troubleshooting  
Problem  
After making a call you Make sure the tone or pulse selection in your  
can't hear a ring communications application is set correctly.  
Communication is cut The computer will automatically cut off  
Procedure  
off unexpectedly  
communication when connection with the carrier  
is not successful for a set time interval. Try  
lengthening this time interval.  
A CONNECT display is Check the error control setting in your  
quickly replaced by NO communications application.  
CARRIER  
Character display  
In data transmission, make sure the parity bit and  
becomes garbled during stop bit settings correspond with those of the  
a communication  
remote computer.  
Check the flow control and communication  
protocol.  
You cannot receive an Check the "rings before auto answer" setting in  
incoming call  
your communications application.  
If problems persist, contact your dealer.  
DVD Super Multi drive supporting double layer disc recording  
For more information, refer to Chapter 5, About the HD DVD.  
Problem  
Procedure  
You cannot access a  
disc in the drive  
Make sure the drive's drawer is securely closed.  
Press gently until it clicks into place.  
Open the drawer and make sure the disc is  
properly seated. It should lie flat with the label  
facing up.  
A foreign object in the drawer could block laser  
light from reading the disc. Make sure there is no  
obstruction. Remove any foreign object.  
Check whether the disc is dirty. If it is, wipe it with  
a clean cloth dipped in water or a neutral cleaner.  
See the Media Care section in Chapter 4 for  
details on cleaning.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-13  
Troubleshooting  
Problem  
Procedure  
The software or hardware configuration may be  
Some discs run  
correctly, but others do causing a problem. Make sure the hardware  
not  
configuration matches your software's needs.  
Check the disc's documentation.  
Check the type of disc you are using. The drive  
supports:  
DVD: DVD-ROM, DVD-Video, DVD-R,  
DVD-RW, DVD+R, DVD+RW, DVD-RAM,  
DVD+R (Double Layer), DVD-R (dual  
Layer)  
CD: CD-DA, CD-Text, Photo CD (single/multi-  
session), CD-ROM Mode 1, Mode 2,  
CD-ROM XA Mode 2 (Form1, Form2),  
Enhanced CD (CD-EXTRA), CD-G (Audio  
CD only)  
Check the region code on the DVD. It must match  
that on the DVD Super Multi drive.  
Cannot write correctly If you have trouble writing, make sure you are  
observing the following precautions:  
Use only media recommended by TOSHIBA.  
Do not use the mouse or keyboard during  
writing.  
Use only the software supplied with the  
computer for recording.  
Do not run or start other software during  
writing.  
Do not jar the computer during writing.  
Do not connect/ disconnect external devices  
or install/remove internal cards during writing.  
If problems persist, contact your dealer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-14  
Troubleshooting  
HD DVD-R or HD DVD-ROM drive supporting disc recording  
For more information, refer to Chapter 5, About the HD DVD.  
Problem  
Procedure  
You cannot access a  
Make sure the drive's drawer is securely closed.  
CD/DVD/HD DVD in the Press gently until it clicks into place.  
drive  
Open the drawer and make sure the disc is  
properly seated. It should lie flat with the label  
facing up.  
A foreign object in the drawer could block laser  
light from reading the disc. Make sure there is no  
obstruction. Remove any foreign object.  
Check whether the CD, DVD, or HD DVD is dirty.  
If it is, wipe it with a clean cloth dipped in water or  
a neutral cleaner. See the Media Care section in  
Chapter 4 for details on cleaning.  
Some CD/DVD/  
The computer's software or hardware  
HD DVDs run correctly, configuration may be causing a problem - ensure  
but others do not  
that these configurations match the requirements  
of the CD/DVD/HD DVD media (refer to the CD's,  
DVD's, or HD DVD's documentation if available).  
HD DVD: HD DVD-ROM (Single-sided Single-  
Layer), HD DVD-ROM (Single-sided  
Dual-Layer), HD DVD-R (Single-sided  
Single-Layer), HD DVD-R (Single-  
sided Dual-Layer), HD DVD-Video,  
HD DVD (Twin format disc)  
DVD:  
DVD-ROM, DVD-Video, DVD-R/-R  
Layer), DVD-RW, DVD+RW,  
DVD-RAM  
CD:  
CD-DA, CD-Text, Photo CD. (single/  
multi-session), CD-ROM Mode 1,  
Mode 2, CD-ROM XA Mode 2 (Form1,  
Form2), Enhanced CD (CD-EXTRA),  
Addressing Method 2  
For DVD Videos, you should check the region  
coding on the DVD to ensure that it matches that  
on the HD DVD-ROM drive. For reference, region  
codes are listed in the Optical disc drives section  
in Chapter 2, The Grand Tour in the Online  
manual.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-15  
Troubleshooting  
Problem  
Procedure  
Cannot write correctly If you have trouble writing, make sure you are  
observing the following precautions:  
Use only media recommended by TOSHIBA.  
Do not use the mouse or keyboard during  
writing.  
Use only the software supplied with the  
computer for recording.  
Do not run or start other software during  
writing.  
Do not jar the computer during writing.  
Do not connect/ disconnect external devices  
or install/remove internal cards during writing.  
If problems persist, contact your dealer.  
Disk drive  
For information on disk care refer to Chapter 4, Operating Basics.  
Problem  
Procedure  
Some programs run  
The software or hardware configuration may be  
correctly, but others do causing a problem. Make sure the hardware  
not configuration match's your software's needs.  
You cannot access the Try another disk. If you can access this disk, the  
disk drive  
original disk (not the disk drive) is problem.  
If problems persist, contact your dealer.  
Real Time Clock  
Problem  
Procedure  
The following message The RTC battery charge has become exhausted,  
is displayed on the LCD: you should set the date and time in within the  
BIOS setup screen through the following steps:  
RTC battery is  
low or CMOS  
checksum is  
inconsistent.  
Press [F2] key  
to set Date/  
Time.  
1. Press [F1] key. BIOS setup will boot up.  
2. Press [F2] to set the date in [System Date].  
3. Press [F2] to set the time in [System Time].  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-16  
Troubleshooting  
Web Camera  
Problem  
Procedure  
Refer to Chapter 4, Using the Web Camera.  
Cannot use the Web  
Camera  
TOSHIBA support  
If you require any additional help using your computer or if you are having  
problems operating the computer, you may need to contact TOSHIBA for  
additional technical assistance.  
Before you call  
Some problems you experience may be related to software or the operating  
system, it is important to investigate other sources of assistance first.  
Before contacting TOSHIBA, try the following:  
Review troubleshooting sections in the documentation for software and  
peripheral devices.  
If a problem occurs when you are running software applications, consult  
the software documentation for troubleshooting suggestions. Call the  
software company’s technical support for assistance.  
Consult the dealer you purchased your computer and/or software from.  
They are your best sources for current information and support.  
Where to write  
If you are still unable to solve the problem and suspect that it is hardware  
related, write to TOSHIBA at the location listed in the accompanying  
warranty booklet or visit http://www.toshiba-europe.com on the Internet.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10-17  
   
Disclaimers  
Chapter 11  
Disclaimers  
This chapter states the Disclaimer(s) information applicable to TOSHIBA  
computers.  
CPU  
Central Processing Unit ("CPU") Performance Disclaimer.  
CPU performance in your computer product may vary from specifications  
under the following conditions:  
use of certain external peripheral products  
use of battery power instead of AC power  
use of certain multimedia, computer generated graphics or video  
applications  
use of standard telephone lines or low speed network connections  
use of complex modeling software, such as high end computer aided  
design applications  
use of several applications or functionalities simultaneously  
use of computer in areas with low air pressure (high altitude  
>1,000 meters or >3,280 feet above sea level)  
use of computer at temperatures outside the range of 5°C to 30°C  
(41°F to 86°F) or >25°C (77°F) at high altitude (all temperature  
references are approximate and may vary depending on the specific  
computer model - please refer to your PC documentation or visit the  
Toshiba website at http://www.pcsupport.toshiba.com for details).  
CPU performance may also vary from specifications due to design  
configuration.  
Under some conditions, your computer product may automatically  
shutdown. This is a normal protective feature designed to reduce the risk of  
lost data or damage to the product when used outside recommended  
conditions. To avoid risk of lost data, always make back-up copies of data  
by periodically storing it on an external storage medium. For optimum  
performance, use your computer product only under recommended  
conditions. Read additional restrictions in your product documentation.  
Contact Toshiba technical service and support, refer to TOSHIBA support  
section in Chapter 10 Troubleshooting for more information.  
User’s Manual  
11-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Disclaimers  
64-Bit Computing.  
64-bit processors are designed to take advantage of 32 and 64 bit  
computing.  
64-bit computing requires that the following hardware and software  
requirements are met:  
64-bit Operating System  
64-bit CPU, Chipset and BIOS (Basic Input/Output System)  
64-bit Device drivers  
64-bit applications  
Certain device drivers and/or applications may not be compatible with a  
64-bit CPU and therefore may not function properly. A 32-bit version of the  
operating system is preinstalled on your computer unless explicitly stated  
that the operating system is 64-bit.  
Memory (Main System)  
Part of the main system memory may be used by the graphics system for  
graphics performance and therefore reduce the amount of main system  
memory available for other computing activities. The amount of main  
system memory allocated to support graphics may vary depending on the  
graphics system, applications utilized, system memory size and other  
factors. For PC's configured with 4 GB of system memory, the full system  
memory space for computing activities will be considerably less and will  
vary bay model and system configuration.  
Battery Life  
Battery life may vary considerably depending on product model,  
configuration, applications, power management settings and features  
utilized, as well as the natural performance variations produced by the  
design of individual components. Published battery life numbers are  
achieved on select models and configurations tested by Toshiba at the time  
of publication. Recharge time varies depending on usage. Battery may not  
charge while computer is consuming full power.  
After going through many charge and discharge cycles, the battery will lose  
its ability to perform at maximum capacity and will need to be replaced.  
This is a normal phenomenon for all batteries. To purchase a new battery  
pack, see the accessories information that is shipped with your computer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11-2  
   
Disclaimers  
HDD Drive Capacity  
9
1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10.  
The computer operating system, however, reports storage capacity using  
powers of 2 for the definition of 1 GB = 2 = 1,073,741,824 bytes, and  
30  
therefore shows less storage capacity. Available storage capacity will also  
be less if the product includes one or more pre-installed operating systems,  
such as Microsoft Operating System and/or pre-installed software  
applications, or media content. Actual formatted capacity may vary.  
LCD  
Over a period of time, and depending on the usage of the computer, the  
brightness of the LCD screen will deteriorate. This is an intrinsic  
characteristic of LCD technology.  
Maximum brightness is only available when operating in AC power mode.  
The screen will dim when the computer is operated on battery power and  
you will not be able to increase the brightness of the screen.  
Graphics Processor Unit ("GPU")  
Graphics processor unit ("GPU") performance may vary depending on  
product model, design configuration, applications, power management  
settings and features utilized. GPU performance is only optimized when  
operating in AC power mode and may decrease considerably when  
operating in battery power mode.  
Wireless LAN  
The transmission speed over the wireless LAN and the distance over which  
wireless LAN can reach may vary depending on surrounding  
electromagnetic environment, obstacles, access point design and  
configuration, and client design and software/hardware configurations.  
[54 Mbps is the theoretical maximum speed under the IEEE802.11 (a/b/g)  
standard.] The actual transmission speed will be lower than the theoretical  
maximum speed.  
Non-applicable Icons  
Certain notebook chassis are designed to accommodate all possible  
configurations for an entire product series. Therefore, please be aware that  
your selected model may not have all the features and specifications  
corresponding to all of the icons or switches shown on the notebook  
chassis.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11-3  
         
Disclaimers  
Copy Protection  
Copy protection technology included in certain media may prevent or limit  
recording or viewing of the media.  
Images  
All images are simulated for purposes of illustration.  
LCD Brightness and Eye Strain  
Your LCD display has a brightness approaching that of a TV device. We  
recommend that you adjust the brightness of your LCD to a comfortable  
level to prevent possible strain on your eyes.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11-4  
     
Specifications  
Appendix A  
Specifications  
This appendix summarizes the computer's technical specifications.  
Dimensions  
399 mm (W) × 288 mm (D) × 46.5 mm (H. Max.)  
288mm  
36mm  
46.5mm  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A-1  
     
Specifications  
Weight  
Starting at 7.2 lbs / 3.27 kg  
* Weight may vary depending on product configuration, vendor  
components, manufacturing variability and options selected.  
Environmental Requirements  
Conditions  
Operating  
Ambient temperature  
Relative humidity  
5°C to 35°C  
20% to 80%  
Non-operating  
Conditions  
Operating  
-20°C to 65°C  
Altitude (from sea level)  
-30 to 10,000 feet  
-30 to 40,000 feet  
Non-operating  
Built-in Modem  
Network control unit (NCU)  
Type of NCU  
Type of line  
AA  
Telephone line (analog only)  
Type of dialling  
Pulse  
Tone  
Control command  
Monitor function  
AT commands  
EIA-578 commands  
Computer's speaker  
Communication specifications  
Communication  
System  
Data:  
Fax:  
Full duplex  
Half duplex  
Communication  
Protocol  
Data:  
ITU-T-Rec  
(Former CCITT)  
V.21/V.22/V.22bis/V.32/  
V.32bis/V.34/V.90/ V.92  
(only for USA and  
Canada)  
Bell  
103/212A  
Fax:  
ITU-T-Rec  
(Former CCITT)  
V.17/V.29/V.27ter /  
V.21 ch2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A-2  
Specifications  
Communication  
Speed  
Data transmission and reception  
300/1200/2400/4800/7200/9600/12000/14400/  
16800/19200/21600/24000/26400/28800/31200/  
33600 bps  
Data reception only with V.90/V.92  
28000/29333/30666/32000/33333/34666/36000/  
37333/38666/40000/41333/42666/44000/45333/  
46666/48000/49333/50666/52000/53333/54666/  
56000 bps  
Fax:  
2400/4800/7200/9600/12000/14400 bps  
Error correcting  
MNP class 4 and ITU-T V.42  
Data compression  
MNP class 5 and ITU-T V.42bis  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A-3  
Display Modes  
Appendix B  
Display Modes  
This appendix contains a table listing all the display modes when the  
display is set to an external monitor.  
If you are running some applications (for example a 3D application or video  
playback and so on), you may see some disturbance, flickering or frame  
dropping on your screen. If that occurs, adjust the resolution of display,  
lowering it until the screen is displayed properly. You could also disable  
Windows Aero™. to help correct this situation.  
CRT Display  
Resolution  
Color Depth  
(bit)  
Refresh Rate  
(Hz)  
800 × 600  
16 bit  
32 bit  
16 bit  
32 bit  
16 bit  
32 bit  
16 bit  
32 bit  
16 bit  
32 bit  
16 bit  
32 bit  
16 bit  
32 bit  
16 bit  
32 bit  
60, 75, 85, 100  
60, 75, 85, 100  
60, 75, 85, 100  
60, 75, 85, 100  
60  
1024 × 768  
1280 × 800  
1280 × 1024  
1440 × 900  
1600 × 1200  
1920 × 1440  
2048 × 1536  
60  
60, 75, 85, 100  
60, 75, 85, 100  
60  
60  
60, 75, 85, 100  
60, 75, 85, 100  
60, 75  
60, 75  
60  
60  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B-1  
     
Display Modes  
Some of display mode might not be supported depending on the external  
monitor which you use.  
Displaying movies on a TV or CRT  
This section describes how to set up your system to display movies  
simultaneously on your computer's LCD and on an external TV or CRT  
monitor.  
To connect a television, follow the steps below.  
1. Turn the computer off.  
2. Use a video cable (not supplied) to connect the television to the video  
out port.  
3. Turn the television on.  
4. Turn the computer on.  
You can use the hotkeys Fn + F5 or use the TV-Out button to change the  
display device. Refer to Chapter 6, The Keyboard.  
If a television is connected to the computer, set the TV type in Display  
Properties. Follow the steps below, based on the configuration of your  
computer:  
For ATI Mobility RadeonHD2400/HD2600*  
1. Click Start Control Panel Personalization.  
2. Choose Display Settings to change resolution and colors.  
3. Click Start and All Programs.  
4. Click Catalyst Control Center  
5. Select CCC.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B-2  
Display Modes  
6. In Catalyst Control Center window, setup your television or CRT and  
Notebook displays.  
* The availability of this feature is dependent on the model you purchased.  
Displaying movies on a HDMI Monitor  
This section describes how to set up your system to display movies a HDMI  
monitor.  
To connect a HDMI monitor, follow the steps below.  
1. Turn the computer off.  
2. Use a HDMI cable (not supplied) to connect the HDMI monitor to the  
HDMI out port on your computer.  
3. Turn the HDMI monitor on.  
4. Turn the computer on.  
If a HDMI monitor is connected to the computer, follow the steps below,  
based on the configuration of your computer:  
1. Click Start and All Programs.  
2. Click Catalyst Control Center.  
3. Select CCC.  
4. In Catalyst Control Center window, select Display manager from left  
select panel.  
5. You can see a HDMI monitor that connected in the list (If not, you can  
click Detect Monitor once)  
6. Drag HDMI monitor icon to "Main:" then select Swap Devices.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B-3  
Display Modes  
7. After system applying the display mode to HDMI, click Force then  
select Desktop area to select the HDMI mode.  
* The availability of this feature is dependent on the model you purchased.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B-4  
AC Power Cord and Connectors  
Appendix C  
AC Power Cord and Connectors  
The power cord's AC input plug must be compatible with the various  
international AC power outlets and the cord must meet the standards for  
the country/region in which it is used. All cords must meet the following  
specifications:  
Length:  
Minimum 1.7 meters  
2
Wire size:  
Minimum 0.75 mm  
Current rating:  
Voltage rating:  
Minimum 2.5 amperes  
125 or 250 VAC  
(depending on country/region's power standards)  
Certification agencies  
U.S. and Canada:  
UL listed and CSA certified  
No. 18 AWG, Type SVT or SPT-2  
Australia:  
AS  
Europe:  
Austria:  
Italy:  
OVE  
IMQ  
Belgium:  
The  
Netherlands:  
CEBEC  
KEMA  
Denmark:  
Finland:  
France:  
Norway:  
DEMKO  
FIMKO  
LCIE  
NEMKO  
SEMKO  
SEV  
Sweden:  
Switzerland:  
Germany:  
United  
Kingdom:  
VDE  
BSI  
In Europe, two conductors power cord must be VDE type, H05VVH2-F or  
H03VVH2-F and for three conductors power cord must be VDE type,  
H05VV-F.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C-1  
   
AC Power Cord and Connectors  
For the United States and Canada, two pin plug configuration must be a  
2-15P (250V) or 1-15P (125 V) and three pin plug coniguration must be  
6-15P (250V) or 5-15P (125V) as designated in the U. S. National Electrical  
code handbook and the Canadian Electrical Code Part II.  
The following illustrations show the plug shapes for the U. S. A. and  
Canada, the United Kingdom, Australia and Europe.  
USA  
United Kingdom  
UL approved  
BS approved  
Australia  
Europe  
AS approved  
Approved by the  
appropriate agency  
Canada  
China  
CSA approved  
CCC approved  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C-2  
If your computer is stolen  
Appendix D  
If your computer is stolen  
Always take care of your computer and try to prevent it from being stolen.  
You are the owner of a valuable technical device, which may be highly  
attractive to thieves, so please do not leave it unattended in a public place.  
To further help protect against theft, security cables can be bought for use  
with your notebook when it is being used at home or in the office.  
Make a note of your computer’s machine type, model number, and serial  
number, and put it in a safe place. You will find this information on the  
underside of your notebook. Please also keep the receipt of the computer  
you purchased.  
Should your computer be stolen, however, we’ll help you try to find it.  
Before contacting TOSHIBA, please prepare the following information  
which is necessary to uniquely identify your computer:  
In which country was your computer stolen?  
What type of machine do you have?  
What was the model number (PA number)?  
What was the serial number (8 digits)?  
When was it stolen, i.e. date?  
What is your address, phone, and fax number?  
To register the theft on paper, please follow these procedures:  
Fill in the TOSHIBA Theft Registration form (or a copy of it) below.  
Attach a copy of your receipt showing where your computer was  
purchased.  
Either fax or send the receipt and registration form to the address  
below.  
To register the theft online, please follow these procedures:  
Visit http://www.toshiba-europe.com on the Internet. In the product  
area, choose Computer Systems.  
In the Computer Systems page, open the Support & Downloads menu  
and choose the Stolen Units Database option.  
Your entries are used to track your computer at our service points.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-1  
   
If your computer is stolen  
TOSHIBA Theft Registration  
Send to:  
TOSHIBA Europe GmbH  
Technical Service and Support  
Leibnizstr. 2  
93055 Regensburg  
Germany  
Fax number:  
+49 (0) 941 7807 921  
Country stolen:  
Machine type:  
(e.g. P200 Series)  
Model number:  
(e.g. PSA50 YXT)  
Serial number:  
(e.g. 12345678G)  
Date stolen:  
Year  
Month  
Day  
Owner’s details  
Last name, first name:  
Company:  
Street:  
Postal Code/City:  
Country:  
Phone:  
Fax:  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-2  
Glossary  
Glossary  
The terms in this glossary cover topics related to this manual. Alternate  
naming is included for reference.  
Abbreviations  
AC: alternating current  
AGP: accelerated graphics port  
BIOS: basic input output system  
CD-ROM: Compact Disc-Read Only Memory  
CD-RW: Compact Disc-Read/Write  
CMOS: complementary metal-oxide semiconductor  
CPU: central processing unit  
CRT: cathode ray tube  
DC: direct current  
DDC: display data channel  
DMA: direct memory access  
DOS: disk operating system  
DVD: digital versatile disc  
ECP: extended capabilities port  
FDD: floppy disk drive  
HDD: hard disk drive  
IDE: integrated drive electronics  
I/O: input/output  
IRQ: interrupt request  
KB: kilobyte  
LCD: liquid crystal display  
LED: light emitting diode  
LSI: large scale integration  
MS-DOS: Microsoft Disk Operating System  
PCI: peripheral component interconnect  
RAM: random access memory  
ROM: read only memory  
RTC: real time clock  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary-1  
   
Glossary  
SCSI: small computer system interface  
TFT: thin-film transistor  
USB: Universal Serial Bus  
VESA: Video Electronic Standards Association  
VGA: video graphics array  
WXGA+: wide extended graphics array  
A
adaptor: A device that provides an interface between two dissimilar  
electronic devices. For example, the AC adaptor modifies the power  
from a wall outlet for use by the computer. This term also refers to  
the add-in circuit cards that control external devices, such as video  
monitors and magnetic tape devices.  
application: A group of programs that together are used for a specific task  
such as accounting, financial planning, spreadsheets, word  
processing and games.  
B
BIOS: Basic Input Output System. The firmware that controls data flow  
within the computer. See also firmware.  
bit: Derived from "binary digit," the basic unit of information used by the  
computer. It is either zero or one. Eight bits is one byte. See also  
byte.  
boot: Short for bootstrap. A program that starts or restarts the computer.  
The program reads instructions from a storage device into the  
computer’s memory.  
bps: Bits per second. Typically used to describe the data transmission  
speed of a modem.  
buffer: The portion of the computer’s memory where data is temporarily  
stored. Buffers often compensate for differences in the rate of flow  
from one device to another.  
bus: An interface for transmission of signals, data or electric power.  
byte: The representation of a single character. A sequence of eight bits  
treated as a single unit; also the smallest addressable unit within the  
system.  
C
cache memory: High speed memory which stores data that increases  
processor speed and data transfer rate. When the CPU reads data  
from main memory, it stores a copy of this data in cache memory.  
The next time the CPU needs that same data, it looks for it in the  
cache memory rather than the main memory, which saves time. The  
computer has two cache levels. Level one is incorporated into the  
processor and level two resides in external memory.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary-2  
Glossary  
capacity: The amount of data that can be stored on a magnetic storage  
device such as a floppy disk or hard disk. It is usually described in  
terms of kilobytes (KB), where one KB = 1024 bytes and megabytes  
(MB), where one MB = 1024 KB.  
CD-ROM: A Compact Disc-Read Only Memory is a high capacity disc that  
can be read from but not written to. The CD-ROM drive uses a laser,  
rather than magnetic heads, to read data from the disc.  
CD-R: A Compact Disc-Recordable disc can be written once and read  
many times. See also CD-ROM.  
CD-RW: A Compact Disc-Read/Write disc can be rewritten many times.  
See also CD-ROM.  
character: Any letter, number, punctuation mark, or symbol used by the  
computer. Also synonymous with byte.  
chip: A small semiconductor containing computer logic and circuitry for  
processing, memory, input/output functions and controlling other  
chips.  
CMOS: Complementary Metal-Oxide Semiconductor. An electronic circuit  
fabricated on a silicon wafer that requires very little power.  
Integrated circuits implemented in CMOS technology can be tightly  
packaged and are highly reliable.  
compatibility: 1) The ability of one computer to accept and process data in  
the same manner as another computer without modifying the data or  
the media upon which it is being transferred.  
2) the ability of one device to connect to or communicate with  
another system or component.  
components: Elements or parts (of a system) which make up the whole  
(system).  
configuration: The specific components in your system (such as the  
terminal, printer, and disk drives) and the settings that define how  
your system works. You use the HW Setup program to control your  
system configuration.  
control keys: A key or sequence of keys you enter from the keyboard to  
initiate a particular function within a program.  
controller: Built-in hardware and software that controls the functions of a  
specific internal or peripheral device (e.g. keyboard controller).  
CPU: Central Processing Unit. The portion of the computer that interprets  
and executes instructions.  
CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a  
fluorescent screen-producing luminous spots. An example is the  
television set.  
cursor: A small, blinking rectangle or line that indicates the current position  
on the display screen.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary-3  
Glossary  
D
DC: Direct Current. Electric current that flows in one direction. This type of  
power is usually supplied by batteries.  
default: The parameter value automatically selected by the system when  
you or the program do not provide instructions. Also called a preset  
value.  
device driver: A program that controls communication between a specific  
peripheral device and the computer. The CONFIG.SYS file contains  
device drivers that MS-DOS loads when you turn the computer on.  
dialog box: A window that accepts user input to make system settings or  
record other information.  
disk drive: The device that randomly accesses information on a disk and  
copies it to the computer’s memory. It also writes data from memory  
to the disk. To accomplish these tasks, the unit physically rotates the  
disk at high speed past a read-write head.  
display: A CRT, LCD, or other image producing device used to view  
computer output.  
DOS: Disk Operating System. See operating system.  
driver: A software program, generally part of the operating system, that  
controls a specific piece of hardware (frequently a peripheral device  
such as a printer or mouse).  
DVD-RAM: A Digital Versatile Disc Random Access Memory is a high-  
capacity, high performance disc that lets you store large volumes of  
data. The DVD-ROM drive uses a laser to read data from the disc.  
DVD-ROM: A Digital Versatile Disc Read Only Memory is a high capacity,  
high performance disc suitable for play back of video and other high-  
density files. The DVD-ROM drive uses a laser to read data from the  
disc.  
E
execute: To interpret and execute an instruction.  
F
floppy disk: A removable disk that stores magnetically encoded data.  
floppy disk drive (FDD): An electromechanical device that reads and  
writes to floppy disks.  
folder: An icon in Windows used to store documents or other folders.  
format: The process of readying a blank disk for its first use. Formatting  
establishes the structure of the disk that the operating system  
expects before it writes files or programs onto the disk.  
function keys: The keys labeled F1 through F12 that tell the computer to  
perform certain functions.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary-4  
Glossary  
G
gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also  
megabyte.  
graphics: Drawings, pictures, or other images, such as charts or graphs, to  
present information.  
H
hard disk: A non-removable disk usually referred to as drive C. The factory  
installs this disk and only a trained engineer can remove it for  
servicing. Also called fixed disk.  
hard disk drive (HDD): An electromechanical device that reads and writes  
a hard disk. See also hard disk.  
hertz: A unit of wave frequency that equals one cycle per second.  
hot key: The computer’s feature in which certain keys in combination with  
the extended function key, Fn, can be used to set system  
parameters, such as speaker volume.  
I
input: The data or instructions you provide to a computer, communication  
device or other peripheral device from the keyboard or external or  
internal storage devices. The data sent (or output) by the sending  
computer is input for the receiving computer.  
I/O: Input/output. Refers to acceptance and transfer of data to and from a  
computer.  
I/O devices: Equipment used to communicate with the computer and  
transfer data to and from it.  
J
jumper: A small clip or wire that allows you to change the hardware  
characteristics by electrically connecting two points of a circuit.  
K
K: Taken from the Greek word kilo, meaning 1000; often used as equivalent  
th  
to 1024, or 2 raised to the 10 power. See also byte and kilobyte.  
KB: See kilobyte.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary-5  
Glossary  
L
Light Emitting Diode (LED): A semiconductor device that emits light when  
a current is applied.  
Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of  
glass coated with transparent conducting material. The viewing-side  
coating is etched into character forming segments with leads that  
extend to the edge of the glass. Applying a voltage between the  
glass sheets alters the brightness of the liquid crystal.  
LSI: Large Scale Integration.  
1) A technology that allows the inclusion of up to 100,000 simple  
logic gates on a single chip.  
2) An integrated circuit that uses large scale integration.  
M
megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also  
kilobyte.  
mode: A method of operation, for example, the boot mode, Sleep mode or  
the hibernation mode.  
modem: Derived from modulator/demodulator, a device that converts  
(modulates) digital data for transmission over telephone lines and  
then converts modulated data (demodulates) to digital format where  
received.  
monitor: A device that uses rows and columns of pixels to display  
alphanumeric characters or graphic images. See also CRT.  
MP3: An audio compression standard that enables high-quality  
transmission and real-time playback of sound files.  
N
numeric pad: A feature that allows you to perform numeric entry, or to  
control cursor and page movement.  
O
operating system: A group of programs that controls the basic operation  
of a computer. Operating system functions include interpreting  
programs, creating data files, and controlling the transmission and  
receipt (input/output) of data to and from memory and peripheral  
devices.  
output: The results of a computer operation. Output commonly indicates  
data.  
1) printed on paper, 2) displayed at a terminal, 3) sent through the  
serial port of internal modem, or 4) stored on some magnetic media.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary-6  
Glossary  
P
parity: 1) The symmetrical relationship between two parameter values  
(integers) both of which are either on or off; odd or even; 0 or 1.  
2) In serial communications, an error detection bit that is added to a  
group of data bits making the sum of the bits even or odd. Parity can  
be set to none, odd, or even.  
peripheral device: An I/O device that is external to the central processor  
and/or main memory such as a printer or a mouse.  
pixel: A picture element. The smallest dot that can be made on a display or  
printer. Also called a pel.  
plug and play: A capability with Windows that enables the system to  
automatically recognize connections of external devices and make  
the necessary configurations in the computer.  
port: The electrical connection through which the computer sends and  
receives data to and from devices or other computers.  
prompt: A message the computer provides indicating it is ready for or  
requires information or an action from you.  
R
Random Access Memory (RAM): High speed memory within the  
computer circuitry that can be read or written to.  
restart: Resetting a computer without turning it off (also called "warm boot"  
or "soft reset"). See also boot.  
RJ11: A modular telephone jack.  
RJ45: A modular LAN jack.  
ROM: Read Only Memory: A nonvolatile memory chip manufactured to  
contain information that controls the computer’s basic operation.  
You cannot access or change information stored in ROM.  
S
SCSI: Small Computer System Interface is an industry standard interface  
for connection of a variety of peripheral devices.  
soft key: Key combinations that emulate keys on the IBM keyboard,  
change some configuration options, stop program execution, and  
access the numeric pad.  
stop bit: One or more bits of a byte that follow the transmitted character or  
group codes in asynchronous serial communications.  
system disk: A disk that has been formatted with an operating system. For  
MS-DOS the operating system is contained in two hidden files and  
the COMMAND.COM file. You can boot a computer using a system  
disk. Also called an operating system disk.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary-7  
Glossary  
T
terminal: A typewriter-like keyboard and CRT display screen connected to  
the computer for data input/output.  
TFT display: A liquid crystal display (LCD) made from an array of liquid  
crystal cells using active-matrix technology with thin film transistor  
(TFT) to drive each cell.  
TouchPad/Dual Mode Pad: A pointing device integrated into the TOSHIBA  
computer palm rest.  
U
Universal Serial Bus: This serial interface lets you communicate with  
several devices connected in a chain to a single port on the  
computer.  
V
VGA: Video Graphics Array is an industry standard video adaptor that lets  
you run any popular software.  
W
warm start: Restarting or resetting a computer without turning it off.  
write protection: A method for protecting a floppy disk from accidental  
erasure.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary-8  

Taurus Group Vacuum Cleaner EXEO 2000 User Manual
Topcon Inflatable Bouncy Toy FC 200 with Windows CE50 User Manual
Toshiba Air Conditioner RAV SM1106BT E User Manual
Toshiba Projection Television TLP260 User Manual
Universal Smoke Alarm SS 770 SS 771 User Manual
Universal Smoke Alarm SS 770 User Manual
Vanguard Managed Solutions Gas Heater VP1000B User Manual
ViewSonic Stepper Machine VS12663 User Manual
VistaQuest Camcorder VQ DV7 User Manual
Vulcan Hart Carpet Cleaner VHX10G User Manual