Toshiba Car Satellite Radio System U500 User Manual

User’s Manual  
Satellite U500/U500D  
Satellite Pro U500/U500D  
PORTÉGÉ M900/M900D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5: The Keyboard  
User’s Manual  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7: HW Setup  
iv  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A: Specifications  
Appendix C: Wireless LAN  
Appendix F: Legal Footnotes  
User’s Manual  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright  
© 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws,  
this manual cannot be reproduced in any form without the prior written permission  
of TOSHIBA. No patent liability is assumed, with respect to the use of the  
information contained herein.  
TOSHIBA Satellite U500/U500D, Satellite Pro U500/U500D, PORTÉGÉ M900/  
M900D Series Portable Personal Computer User’s Manual  
First edition May 2009  
Copyright authority for music, movies, computer programs, databases, and  
other intellectual property covered by copyright laws belongs to the author or the  
copyright owner. Copyrighted material can be reproduced only for personal use  
or use within the home. Any other use beyond that stipulated above (including  
conversion to digital format, alteration, transfer of copied material and distribution  
on a network) without the permission of the copyright owner is a violation of  
copyright or author’s rights and is subject to civil damages or criminal action.  
Please comply with copyright laws in making any reproduction from this manual.  
Disclaimer  
This manual has been validated and reviewed for accuracy. The instructions  
and descriptions it contains are accurate for the TOSHIBA Satellite U500/  
U500D, Satellite Pro U500/U500D, PORTÉGÉ M900/M900D Series Portable  
Personal Computer at the time of this manual’s production. However, succeeding  
computers and manuals are subject to change without notice. TOSHIBA assumes  
no liability for damages incurred directly or indirectly from errors, omissions or  
discrepancies between the computer and the manual.  
Trademarks  
Microsoft, Windows® and Windows Vista are either registered trademarks or  
trademarks of Microsoft Corporation in the United States and/or other countries.  
DirectX, AcriveDesktop, DirectShow, and Windows Media are registerd  
trademarks of Microsoft Corporation.  
Intel, Intel Core, Celeron, Centrino and Pentium are trademarks or registered  
trademarks of Intel Corporation or its subsidiaries in the United States and other  
countries.  
Adobe and Photoshop are either registered trademarks or trademarks of Adobe  
Systems Incorporated in the United States and/or other countries.  
Bluetooth™ is a registered trademark owned by its proprietor and used by  
TOSHIBA under license.  
ConfigFree is a trademark of TOSHIBA Corporation.  
DVD MovieFactory is trademarks of the Corel Systems. Inc.  
vi  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dolby is a registered trademark of Dolby Laboratories.  
ExpressCard is a trade mark of PCMCIA.  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing LLC.  
Labelflash™ is a trademark of YAMAHA CORPORATION.  
Memory Stick and Memory Stick PRO are registered trademarks of  
SonyCorporation.  
MultiMediaCard and MMC are trademarks of MultiMediaCard Association.  
Photo CD is a trademark of Eastman Kodak.  
Secure Digital and SD are trademarks of SD Card Association.  
xD-Picture Card is a trademark of Fuji Photo Film, Co., Ltd.  
Wi-Fi is as registered trademark of the Wi-Fi Alliance.  
Other trademarks and registered trademarks not listed above may be used in this  
manual.  
FCC information  
FCC notice “Declaration of Conformity  
Information”  
This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to part 15 of the FCC rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to  
try to correct the interference by one or more of the following measures:  
n
n
n
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
n
Consult the dealer or an experienced radio/TV technician for help.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vii  
Only peripherals complying with the FCC class B limits may be attached to  
this equipment. Operation with non-compliant peripherals or peripherals not  
recommended by TOSHIBA is likely to result in interference to radio and TV  
reception. Shielded cables must be used between the external devices and  
the computer’s external monitor port, USB port, serial port, parallel port, PS/2  
mouse/keyboard port and microphone jack. Changes or modifications made to  
this equipment, not expressly approved by TOSHIBA or parties authorized by  
TOSHIBA could void the user’s authority to operate the equipment.  
FCC conditions  
This device complies with part 15 of the FCC Rules. Operation is subject to the  
following two conditions:  
1. This device may not cause harmful interference.  
2. This device must accept any interference received, including interference that  
may cause undesired operation.  
Contact  
Address:  
TOSHIBA America Information Systems, Inc.  
9740 Irvine Boulevard  
Irvine, California 92618-1697  
(949) 583-3000  
Telephone:  
viii  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EU Conformity of Statement  
This product and - if applicable - the supplied accessories too are marked with  
‘CE’ and comply therefore with the applicable harmonized European standards  
listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/  
EC and/or R&TTE Directive 1999/5/EC.  
Responsible for CE- TOSHIBA EUROPE GMBH, Hammfelddamm 8,  
marking:  
41460 Neuss, Germany.  
Manufacturer:  
Toshiba Corporation, 1-1 Shibaura 1-chome,  
Minato-ku, Tokyo, 105-8001, Japan.  
The complete official EU CE Declaration can be obtained on following internet  
page:  
http://epps.toshiba-teg.com/  
VCCI Class B Information  
この装置は情  
ラスB 報技術装置ですの装置は庭環境で使用すことを目的し  
ていますがの装置がラジオやテレビ機に近て使用されると、  
障害を引き起こす扱説明書にって正しい取り扱いをし  
て下さい。  
報処理装置等電波障害自主規制協議VCCI)の基 準に基  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ix  
Canadian Regulatory Information (Canada Only)  
This digital apparatus does not exceed the Class B limits for radio noise emissions  
from digital apparatus as set out in the Radio Interference Regulation of the  
Canadian Department of Communications.  
Note that Canadian Department of Communications (DOC) regulations provide,  
that changes or modifications not expressly approved by TOSHIBA Corporation  
could void your authority to operate this equipment.  
This Class B digital apparatus meets all requirements of the Canadian  
Interference-Causing Equipment Regulations.  
Cet appareil numérique de la class B respecte toutes les exgences du Règlement  
sur le matériel brouileur du Canada.  
Modem warning notice  
Conformity Statement  
The equipment has been approved to [Council Decision 98/482/EC - “TBR 21”]  
for pan-European single terminal connection to the Public Switched Telephone  
Network (PSTN).  
However, due to differences between the individual PSTNs provided in different  
countries/regions the approval does not, of itself, give an unconditional assurance  
of successful operation on every PSTN network termination point.  
In the event of problems, you should contact your equipment supplier in the first  
instance.  
Network Compatibility Statement  
This product is designed to work with, and is compatible with the following  
networks. It has been tested to and found to conform with the additional  
requirements conditional in EG 201 121.  
Germany  
ATAAB AN005,AN006,AN007,AN009,AN010 and  
DE03,04,05,08,09,12,14,17  
Greece  
ATAAB AN005,AN006 and GR01,02,03,04  
ATAAB AN001,005,006,007,011 and  
Portugal  
P03,04,08,10  
Spain  
ATAAB AN005,007,012, and ES01  
ATAAB AN002  
Switzerland  
All other countries/  
ATAAB AN003,004  
regions  
x
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specific switch settings or software setup are required for each network. Refer to  
the relevant sections of the user guide for more details.  
The hookflash (timed break register recall) function is subject to separate national  
type approvals. It has not been tested for conformity to national type regulations,  
and no guarantee of successful operation of that specific function on specific  
national networks can be given.  
Japan regulations  
Region selection  
If you are using the computer in Japan, technical regulations described in the  
Telecommunications Business Law require that you select the Japan country  
mode. It is illegal to use the modem in Japan with any other selection.  
Redial  
Up to two redial attempts can be made. If more than two redial attempts are  
made, the modem will return Black Listed. If you are experiencing problems with  
the Black Listed code, set the interval between redials at one minute or longer.  
Japan’s Telecommunications Business Law permits up to two redials on analogue  
telephones, but the redials must be made within a total of three minutes.  
The internal modem is approved by Japan Approvals Institute for  
Telecommunications Equipment.  
A05-0413001  
This label is located on the module.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xi  
A05-0025001  
This label is located on the module.  
xii  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pursuant to FCC CFR 47, Part 68:  
When you are ready to install or use the modem, call your local telephone  
company and give them the following information:  
n
n
The telephone number of the line to which you will connect the modem.  
The registration number that is located on the device  
LSI US : AGSMD01BDELPHI  
MOTOROLA US: S56MD01B13054  
The FCC registration number of the modem will be found on either the device  
which is to be installed, or, if already installed, on the bottom of the computer  
outside of the main system label.  
n
The Ringer Equivalence Number (REN) of the modem, which can vary.  
For the REN of your modem, refer to your modem’s label.  
The modem connects to the telephone line by means of a standard jack called  
the USOC RJ11C.  
Type of service  
Your modem is designed to be used on standard-device telephone lines.  
Connection to telephone company-provided coin service (central office  
implemented systems) is prohibited. Connection to party lines service is subject to  
state tariffs.  
If you have any questions about your telephone line, such as how many pieces  
of equipment you can connect to it, the telephone company will provide this  
information upon request.  
Telephone company procedures  
The goal of the telephone company is to provide you with the best service it can.  
In order to do this, it may occasionally be necessary for them to make changes  
in their equipment, operations, or procedures. If these changes might affect your  
service or the operation of your equipment, the telephone company will give  
you notice in writing to allow you to make any changes necessary to maintain  
uninterrupted service.  
If problems arise  
If any of your telephone equipment is not operating properly, you should  
immediately remove it from your telephone line, as it may cause harm to the  
telephone network. If the telephone company notes a problem, they may  
temporarily discontinue service. When practical, they will notify you in advance of  
this disconnection.  
If advance notice is not feasible, you will be notified as soon as possible. When  
you are notified, you will be given the opportunity to correct the problem and  
informed of your right to file a complaint with the FCC. In the event repairs are  
ever needed on your modem, they should be performed by TOSHIBA Corporation  
or an authorized representative of TOSHIBA Corporation.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xiii  
Disconnection  
If you should ever decide to permanently disconnect your modem from its present  
line, call the telephone company and let them know of this change.  
Fax branding  
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person  
to use a computer or other electronic device to send any message via a telephone  
fax machine unless such message clearly contains in a margin at the top or  
bottom of each transmitted page or on the first page of the transmission, the date  
and time it is sent and an identification of the business, other entity or individual  
sending the message and the telephone number of the sending machine or such  
business, other entity or individual. In order to program this information into your  
fax modem, you should complete the setup of your fax software before sending  
messages.  
n
Use only No.26AWG or larger UL listed or CSA certified  
telecommunication line cord.  
Instructions for IC CS-03 certified equipment  
1. NOTICE: The Industry Canada label identifies certified equipment. This  
certification means that the equipment meets certain telecommunications  
network protective, operational and safety requirements as prescribed in  
the appropriate Terminal Equipment Technical Requirements document(s).  
The Department does not guarantee the equipment will operate to the user’s  
satisfaction.  
Before installing this equipment, users should ensure that it is permissible to  
be connected to the facilities of the local telecommunications company. The  
equipment must also be installed using an acceptable method of connection.  
The customer should be aware that compliance with the above conditions may  
not prevent degradation of service in some situations.  
Repairs to certified equipment should be coordinated by a representative  
designated by the supplier. Any repairs or alterations made by the user to  
this equipment, or equipment malfunctions, may give the telecommunications  
company cause to request the user to disconnect the equipment.  
Users should ensure, for their own protection, that the electrical ground  
connections of the power utility, telephone lines and internal metallic water  
pipe system, if present, are connected together. This precaution may be  
particularly important in rural areas.  
Users should not attempt to make such connections themselves, but should  
contact the appropriate electric inspection authority, or electrician, as  
appropriate.  
xiv  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. The user manual of analog equipment must contain the equipment’s Ringer  
Equivalence Number (REN) and an explanation notice similar to the following:  
The Ringer Equivalence Number (REN) of the modem, which can vary. For  
the REN of your modem, refer to your computer’s user’s manual.  
The Ringer Equivalence Number (REN) assigned to each terminal device  
provides an indication of the maximum number of terminals allowed to be  
connected to a telephone interface. The termination on an interface may  
consist of any combination of devices subject only to the requirement that the  
sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.  
3. The standard connecting arrangement (telephone jack type) for this  
equipment is jack type(s): USOC RJ11C  
The IC registration number of the modem is shown below:  
LSI Canada: 4005B-DELPHI  
MOTOROLA Canada: 109AH-ML3054  
Notes for Users in Australia and New Zealand  
Modem warning notice for Australia  
Modems connected to the Australian telecoms network must have a valid Austel  
permit. This modem has been designed to specifically configure to ensure  
compliance with Austel standards when the country/region selection is set to  
Australia. The use of other country/region setting while the modem is attached  
to the Australian PSTN would result in you modem being operated in a non-  
compliant manner. To verify that the country/region is correctly set, enter the  
command ATI9 which displays the currently active setting.  
To set the country/region permanently to Australia, enter the following command  
sequence:  
AT+GCI=09  
Failure to set the modem to the Australia country/region setting as shown above  
will result in the modem being operated in a non-compliant manner. Consequently,  
there would be no permit in force for this equipment and the Telecoms Act 1991  
prescribes a penalty of $12,000 for the connection of non-permitted equipment.  
Notes for use of this device in New Zealand  
n
The grant of a Telepermit for a device in no way indicates Telecom acceptance  
of responsibility for the correct operation of that device under all operating  
conditions. In particular the higher speeds at which this modem is capable of  
operating depend on a specific network implementation which is only one of  
many ways of delivering high quality voice telephony to customers. Failure to  
operate should not be reported as a fault to Telecom.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xv  
n
In addition to satisfactory line conditions a modem can only work properly if:  
a/ it is compatible with the modem at the other end of the call; and  
b/ the application using the modem is compatible with the application at the  
other end of the call such as accessing the Internet requires suitable  
software in addition to a modem.  
n
n
This equipment shall not be used in any manner which could constitute a  
nuisance to other Telecom customers.  
Some parameters required for compliance with Telecom’s PTC Specifications  
are dependent on the equipment (PC) associated with this modem. The  
associated equipment shall be set to operate within the following limits for  
compliance with Telecom Specifications:  
a/ There shall be no more than 10 call attempts to the same number  
within any 30 minute period for any single manual call initiation;  
b/ The equipment shall go on-hook for a period of not less than 30 seconds  
between the end of one attempt and the beginning of the next; and  
c/ Automatic calls to different numbers shall be not less than 5 seconds  
apart.  
n
n
Immediately disconnect this equipment should it become physically damaged,  
and arrange for its disposal or repair.  
The correct settings for use with this modem in New Zealand are as follows:  
ATB0 (CCITT operation)  
AT&G2 (1800 Hz guard tone)  
AT&P1 (Decadic dialling make-break ratio = 33%/67%)  
ATS0=0 (not auto answer)  
ATS10=less than 150 (loss of carrier to hang up delay, factory default of 15  
recommended)  
ATS11=90 (DTMF dialling on/off duration=90 ms)  
ATX2 (Dial tone detect, but not (U.S.A.) call progress detect)  
n
n
When used in the Auto Answer mode, the S0 register must be set with a value  
of 3 or 4. This ensures:  
n
a person calling your modem will hear a short burst of ringing before the  
modem answers. This confirms that the call has been successfully  
switched through the network.  
n
caller identification information (which occurs between the first and  
second ring cadences) is not destroyed.  
The preferred method of dialing is to use DTMF tones (ATDT...) as this is  
faster and more reliable than pulse (decadic) dialing. If for some reason you  
must use decadic dialing, your communications program must be set up to  
record numbers using the following translation table as this modem does not  
implement the New Zealand “Reverse Dialing” standard.  
Number to be dialed: 0 1 2 3 4 5 6 7 8 9  
xvi  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Number to program into computer: 0 9 8 7 6 5 4 3 2 1  
Note that where DTMF dialing is used, the numbers should be entered  
normally.  
n
The transmit level from this device is set at a fixed level and because of this  
there may be circumstances where the performance is less than optimal.  
Before reporting such occurrences as faults, please check the line with  
a standard Telepermitted telephone, and only report a fault if the phone  
performance is impaired.  
n
n
n
It is recommended that this equipment be disconnected from the Telecom line  
during electrical storms.  
When relocating the equipment, always disconnect the Telecom line  
connection before the power connection, and reconnect the power first.  
This equipment may not be compatible with Telecom Distinctive Alert  
cadences and services such as FaxAbility.  
NOTE THAT FAULT CALLOUTS CAUSED BY ANY OF THE ABOVE  
CAUSES MAY INCUR A CHARGE FROM TELECOM  
General conditions  
As required by PTC 100, ensure that this office is advised of any changes to the  
specifications of these products which might affect compliance with the relevant  
PTC Specifications.  
The grant of this Telepermit is specific to the above products with the marketing  
description as stated on the Telepermit label artwork. The Telepermit may not be  
assigned to other parties or other products without Telecom approval.  
A Telepermit artwork for each device is included from which you may prepare any  
number of Telepermit labels subject to the general instructions on format, size,  
and colour on the attached sheet.  
The Telepermit label must be displayed on the product at all times as proof to  
purchasers and service personnel that the product is able to be legitimately  
connected to the Telecom network.  
The Telepermit label may also be shown on the packaging of the product and in  
the sales literature, as required in PTC 100.  
The charge for a Telepermit assessment is $337.50. An additional charge of  
$337.50 is payable where an assessment is based on reports against non-  
Telecom New Zealand Specifications. $112.50 is charged for each variation when  
submitted at the same time as the original.  
An invoice for $NZ1237.50 will be sent under separate cover.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xvii  
Following information is only for EU-member states:  
Disposal of products  
The crossed out wheeled dust bin symbol indicates that products  
must be collected and disposed of separately from household waste.  
Integrated batteries and accumulators can be disposed of with the  
product. They will be separated at the recycling centres.  
The black bar indicates that the product was placed on the market after  
August 13, 2005.  
By participating in separate collection of products and batteries, you will  
help to assure the proper disposal of products and batteries and thus  
help to prevent potential negative consequences for the environment  
and human health.  
For more detailed information about the collection and recycling  
programmes available in your country, please visit our website (http://  
eu.computers.toshiba-europe.com) or contact your local city office or  
the shop where you purchased the product.  
Disposal of batteries and/or accumulators  
The crossed out wheeled dust bin symbol indicates that batteries  
and/or accumulators must be collected and disposed of separately from  
household waste.  
If the battery or accumulator contains more than the specified values  
of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery  
Directive (2006/66/EC), then the chemical symbols for lead (Pb),  
mercury (Hg) and/or cadmium (Cd) will appear below the crossed out  
wheeled dust bin symbol.  
By participating in separate collection of batteries, you will help to  
assure the proper disposal of products and batteries and thus help  
to prevent potential negative consequences for the environment and  
human health.  
For more detailed information about the collection and recycling  
programmes available in your country, please visit our website (http://  
eu.computers.toshiba-europe.com) or contact your local city office or  
the shop where you purchased the product.  
This symbol may not be displayed depending on the country and region where  
you purchased  
xviii  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disposing of the computer and the computer’s  
batteries  
n
Discard this computer in accordance with applicable laws and regulations. For  
further information, contact your local government.  
n
This computer contains rechargeable batteries. After repeated use, the  
batteries will finally lose their ability to hold a charge and you will need to  
replace them. Under certain applicable laws and regulations, it may be illegal  
to dispose of old batteries by placing them in the trash.  
n
Please be kind to our shared environment. Check with your local government  
authority for details regarding where to recycle old batteries or how to  
dispose of them properly. Disposal of this material may be regulated due to  
environmental considerations. For disposal, reuse or recycling information,  
please contact your local government.  
EnergyStar® Program  
Your computer model may be Energy Star® Compliant.  
If the model you purchased is compliant, it is labeled  
with the ENERGY STAR logo on the computer and the  
following information applies. TOSHIBA. is a partner in  
the Environmental Protection Agency’s (EPA) Energy Star  
Program and has designed this computer to meet the latest  
Energy Star guidelines for energy efficiency. Your computer  
ships with the power management options preset to a  
configuration that will provide the most stable operating environment and optimum  
system performance for both AC power and battery modes.  
To conserve energy, your computer is set to enter the low-power Sleep Mode  
which shuts down the system and display within 15 minutes of inactivity in AC  
power mode. We recommend that you leave this and other energy saving features  
active, so that your computer will operate at its maximum energy efficiency. You  
can wake the computer from Sleep Mode by pressing the power button.  
According to the EPA, a computer meeting the new ENERGY STAR specifications  
will use between 20% and 50% less energy depending on how it is used. If all  
U.S. household and businesses replaced old computers with new ENERGY STAR  
qualified models, we would save more than $1.8 billion in energy costs over the  
next five years and avoid greenhouse gas emissions equivalent to more than 2.7  
million cars.  
If every computer purchased by businesses next year met the new ENERGY  
STAR requirements, businesses would save more than $210 million over the  
lifetime of those models. That is equivalent to lighting 120 million square feet of  
U.S. commercial building space each year.  
for more information regarding the ENERGY STAR Program.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xix  
 
Optical disc drive safety instructions  
Be sure to check the international precautions at the end of this section.  
Panasonic  
DVD Super Multi (+R Double Layer) UJ862A/VJ862E  
n
The DVD Super Multi Double Layer drive employs a laser system. To  
ensure proper use of this product, please read this instruction manual  
carefully and retain for future reference. Should the unit ever require  
maintenance, contact an authorized service location.  
n
n
Use of controls, adjustments or the performance of procedures other than  
those specified may result in hazardous radiation exposure.  
To prevent direct exposure to the laser beam, do not try to open  
enclosure.  
xx  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hitachi-LG Data Storage, Inc.  
DVD Super Multi (+R Double Layer) GU10N/GU10F  
n
The DVD Super Multi Double Layer drive employs a laser system. To  
ensure proper use of this product, please read this instruction manual  
carefully and retain for future reference. Should the unit ever require  
maintenance, contact an authorized service location.  
n
n
Use of controls, adjustments or the performance of procedures other than  
those specified may result in hazardous radiation exposure.  
To prevent direct exposure to the laser beam, do not try to open  
enclosure.  
User’s Manual  
xxi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hitachi-LG Data Storage, Inc.  
DVD Super Multi (+R Double Layer) GS20F  
n
The DVD Super Multi Double Layer drive employs a laser system. To  
ensure proper use of this product, please read this instruction manual  
carefully and retain for future reference. Should the unit ever require  
maintenance, contact an authorized service location.  
n
n
Use of controls, adjustments or the performance of procedures other than  
those specified may result in hazardous radiation exposure.  
To prevent direct exposure to the laser beam, do not try to open  
enclosure.  
xxii  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
International Precaution  
CAUTION: This appliance contains a laser system and  
is classified as a “CLASS 1 LASER PRODUCT.To  
use this model properly, read the manual carefully and  
keep it for your future reference. In case of any trouble  
with this model, contact your nearest AUTHORIZED  
service center.  
To prevent direct exposure to the laser beam, do not try  
to open the enclosure.  
VORSICHT: Dieses Gerät enthält ein Laser-System  
und ist als “LASERSCHUTZKLASSE 1 PRODUKT”  
klassifiziert. Für den richtigen Gebrauch dieses Modells  
lesen Sie bitte die Bedienungsanleitung sorgfältig  
durch und bewahren diese bitte als Referenz auf. Falls  
Probleme mit diesem Modell auftreten, benachrichtigen  
Sie bitte die nächste autorisierte Service-Vertretung.  
Um einen direkten Kontakt mit dem Laserstrahl zu  
vermeiden darf das Gerät nicht geöffnet werden.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xxiii  
ADVARSEL: Denne mærking er anbragt udvendigt  
på apparatet og indikerer, at apparatet arbejder  
med laserstråler af klasse 1, hviket betyder, at der  
anvendes laserstrlier af svageste klasse, og at man  
ikke på apparatets yderside kan bilve udsat for  
utilladellg kraftig stråling.  
APPARATET BOR KUN ÅBNES AF FAGFOLK  
MED SÆRLIGT KENDSKAB TIL APPARATER MED  
LASERSTRÅLER!  
Indvendigt i apparatet er anbragt den her gengivne  
advarselsmækning, som advarer imod at foretage  
sådanne indgreb i apparatet, at man kan komme til  
at udsætte sig for laserstråling.  
OBS! Apparaten innehåller laserkomponent som  
avger laserstråining överstigande gränsen för  
laserklass 1.  
VAROITUS. Suojakoteloa si saa avata. Laite  
sisältää laserdiodin, joka lähetää näkymätöntä  
silmilie vaarallista lasersäteilyä.  
CAUTION: USE OF CONTROLS, ADJUSTMENTS,  
OR PROCEDURES OTHER THAN THOSE  
SPECIFIED IN THIS MANUAL MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
VORSICHT: DIE VERWENDUNG VON  
ANDEREN STEURUNGEN ODER  
EINSTELLUNGEN ODER DAS DURCHFÜHREN  
VON ANDEREN VORGÄNGEN ALS  
IN DER BEDIENUNGSANLEITUNG  
BESCHRIEBEN KÖNNEN GEFÄHRLICHE  
STRAHLENEXPOSITIONEN ZUR FOLGE HABEN.  
xxiv  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Precautions  
TOSHIBA computers are designed to optimize safety, minimize strain and  
withstand the rigors of portability. However, certain precautions should be  
observed to further reduce the risk of personal injury or damage to thecomputer.  
Be certain to read the general precautions below and to note the cautions included  
in the text of the manual.  
Providing adequate ventilation  
n
Always make sure your computer and AC adaptor have adequate ventilation  
and protected from overheating when the power is turned on or when the  
AC adaptor is connected to a power outlet (even if your computer is in Sleep  
Mode). In this condition, observe the following:  
n
n
Never cover your computer or AC adaptor with any object.  
Never place your computer or AC adaptor near a heat source, such as an  
electric blanket or heater.  
n
n
Never cover or block the vents including those located at the base of the  
computer.  
Always operate your computer on a hard flat surface. Using your  
computer on a carpet or a soft material can block the vents.  
n
n
Always provide sufficient space around the computer.  
Overheating your computer or AC adaptor could cause system failure,  
computer or AC adaptor damage or fire, possibly resulting in a serious injury.  
Creating a computer-friendly environment  
Place the computer on a flat surface that is large enough for the computer and  
any other items you are using, such as a printer.  
Leave enough space around the computer and other equipment to provide  
adequate ventilation. Otherwise, they may overheat.  
To keep your computer in prime operating condition, protect your work area from:  
n
n
Dust, moisture, and direct sunlight.  
Equipment that generates a strong electromagnetic field, such as stereo  
speakers (other than speakers that are connected to the computer) or  
speakerphones.  
n
Rapid changes in temperature or humidity and sources of temperature change  
such as air conditioner vents or heaters.  
n
n
Extreme heat, cold, or humidity.  
Liquids and corrosive chemicals.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xxv  
Stress injury  
Carefully read the Instruction Manual for Safety and Comfort. It contains  
information on the prevention of stress injuries to your hands and wrists that can  
be caused by extensive keyboard use.  
Heat injury  
n
Avoid prolonged physical contact with the computer. If the computer is used  
for long periods, its surface can become very warm. While the temperature will  
not feel hot to the touch, if you maintain physical contact with the computer  
for a long time, for example if you rest the computer on your lap or if you keep  
your hands on the palm rest, your skin might suffer a low-heat injury.  
n
n
If the computer has been used for a long time, avoid direct contact withthe  
metal plate supporting the various interface ports as this can become hot.  
The surface of the AC adaptor can become hot when in use but this condition  
does not indicate a malfunction. If you need to transport the AC adaptor, you  
should disconnect it and let it cool before moving it.  
n
Do not lay the AC adaptor on a material that is sensitive to heat as the  
material could become damaged.  
Pressure or impact damage  
Do not apply heavy pressure to the computer or subject it to any form of strong  
impact as this can damage the computer’s components or otherwise cause it to  
malfunction.  
ExpressCard overheating  
Some ExpressCards can become hot during prolonged use which may result  
in errors or instability in the operation of the device in question. In addition, you  
should also be careful when you remove a PC or ExpressCard that has been used  
for a long time.  
Mobile phones  
Please be aware that the use of mobile phones can interfere with the audio  
system. The operation of the computer will not be impaired in any way, but it  
is recommended that a minimum distance of 30cm is maintained between the  
computer and a mobile phone that is in use.  
Instruction Manual for Safety and Comfort  
All important information on the safe and proper use of this computer is described  
in the enclosed Instruction Manual for Safety and Comfort. Be sure to read it  
before using the computer.  
xxvi  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Preface  
Congratulations on your purchase of the TOSHIBA Satellite U500/U500D, Satellite  
Pro U500/U500D, PORTÉGÉ M900/M900D Series computer. This powerful  
notebook computer provides excellent expansion capability, including multimedia  
devices, and it is designed to provide years of reliable, high-performance  
computing.  
This manual tells how to set up and begin using your TOSHIBA Satellite U500/  
U500D, Satellite Pro U500/U500D, PORTÉGÉ M900/M900D Series computer. It  
also provides detailed information on configuring your computer, basic operations  
and care, using optional devices and troubleshooting.  
If you are a new user of computers or if you’re new to portable computing, first  
read over the Introduction and The Grand Tour chapters to familiarize yourself  
with the computer’s features, components and accessory devices. Then read  
Getting Started for step-by-step instructions on setting up your computer.  
If you are an experienced computer user, please continue reading the preface  
to learn how this manual is organized, then become acquainted with this manual  
by browsing through its pages. Be sure to look over the Specifications section  
of the Introduction, to learn about features that are uncommon or unique to the  
computer. If you are going to install PC Cards or connect external devices such as  
a monitor, be sure to read Chapter 8, Optional Devices.  
Manual contents  
This manual is composed of the following nine chapters, five appendixes, a  
glossary and an index.  
Chapter 1, Introduction, is an overview of the computer’s features, capabilities,  
and options.  
Chapter 2, The Grand Tour, identifies the components of the computer and briefly  
explains how they function.  
Chapter 3, Getting Started, provides a quick overview of how to begin operating  
your computer and gives tips on safety and designing your work area.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xxvii  
 
Chapter 4, Operating Basics, includes instructions on using the following devices:  
TouchPad, Sound System, optical media drives, modem, wireless communication  
and LAN. It also provides tips on care of the computer, and CD/DVDs.  
Chapter 5, The Keyboard, describes special keyboard functions including the  
keypad overlay and hot keys.  
Chapter 6, Power and Power-Up Modes, gives details on the computer’s power  
resources and battery save modes.  
Chapter 7, HW Setup explains how to configure the computer using the HW Setup  
program.  
Chapter 8, Optional Devices, describes the optional hardware available.  
Chapter 9, Troubleshooting, provides helpful information on how to perform some  
diagnostic tests, and suggests courses of action if the computer doesn’t seem to  
be working properly.  
The Appendices provide technical information about your computer.  
The Glossary defines general computer terminology and includes a list of  
acronyms used in the text.  
The Index quickly directs you to the information contained in this manual.  
Conventions  
This manual uses the following formats to describe, identify, and highlight terms  
and operating procedures.  
Abbreviations  
On first appearance, and whenever necessary for clarity, abbreviations are  
enclosed in parentheses following their definition. For example: Read Only  
Memory (ROM). Acronyms are also defined in the Glossary.  
Icons  
Icons identify ports, dials, and other parts of your computer. The indicator panel  
also uses icons to identify the components it is providing information on.  
Keys  
The keyboard keys are used in the text to describe many computer operations. A  
distinctive typeface identifies the key top symbols as they appear on the keyboard.  
For example, Enter identifies the Enter key.  
xxviii  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Key operation  
Some operations require you to simultaneously use two or more keys. We  
identify such operations by the key top symbols separated by a plus sign (+). For  
example, Ctrl + C means you must hold down Ctrl and at the same time press  
C. If three keys are used, hold down the first two and at the same time press the  
third.  
ABC  
When procedures require an action such as clicking an icon or  
entering text, the icon’s name or the text you are to type in is  
represented in the type face you see to the left.  
Display  
Names of windows or icons or text generated by the computer  
that appears on its display screen is presented in the type face  
you see to the left.  
ABC  
Messages  
Messages are used in this manual to bring important information to your attention.  
Each type of message is identified as shown below.  
Pay attention! A caution informs you that improper use of equipment or failure  
to follow instructions may cause data loss or damage your equipment.  
Please read. A note is a hint or advice that helps you make best use of your  
equipment.  
Indicates a potentially hazardous situation, which could result in death or  
serious injury, if you do not follow instructions.  
Terminology  
This term is defined in this document as follows:  
” button in Microsoft®  
Start  
The word “Start” refers to the “  
Windows® Vista™.  
User’s Manual  
xxix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xxx  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Chapter 1  
Introduction  
This chapter provides an equipment checklist, and identifies the computer’s  
features, options, and accessories.  
Some of the features described in this manual may not function properly if you  
use an operating system that was not pre-installed by TOSHIBA.  
Equipment checklist  
Carefully unpack your computer. Save the box and packing materials for future  
use.  
Hardware  
Check to make sure you have all the following items:  
n
TOSHIBA Satellite U500/U500D, Satellite Pro U500/U500D, PORTÉGÉ M900/  
M900D Series Portable Personal Computer  
n
n
n
Universal AC adaptor and power cord  
Battery pack (is pre-installed in computer)  
Clearing cloth (is included with some models)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-1  
 
Introduction  
Software  
The following Windows® operating system and utility software are pre-installed:  
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Microsoft® Windows Vista™  
TOSHIBA Value Added Package  
TOSHIBA Recovery Disc Creator  
TOSHIBA DVD Player  
TOSHIBA SD Memory Utilites  
TOSHIBA Assist  
TOSHIBA ConfigFree™  
TOSHIBA HDD Protection  
TOSHIBA Disc Creator  
TOSHIBA Face Recognition*  
TOSHIBA USB Sleep and Charge Utility*  
Bluetooth Stack for Windows by TOSHIBA*  
TOSHIBA PC Health Monitor  
Fingerprint Utility (Can be used only for Fingerprint utility models.)  
Windows® Mobile Center  
Online Manual  
* The software is pre-installed with some models.  
Documentation  
n
Satellite U500/U500D, Satellite Pro U500/U500D, PORTÉGÉ M900/M900D  
Personal Computer User’s Manual  
n
Satellite U500/U500D, Satellite Pro U500/U500D, PORTÉGÉ M900/M900D  
Personal Computer Quickstart  
n
n
Instruction Manual for Safety and Control  
Warranty information  
If any of the items are missing or damaged, contact your dealer immediately.  
1-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction  
Features  
Please visit your region’s web site for the configuration details of the model that  
you have purchased.  
Processor  
Built-in  
Your computer is equipped with one processor  
and processor type varies depending on model.  
To check which type of processor is inclued in  
your model, open the TOSHIBA PC Diagnostic  
Tool Utility by clicking Start  
TOSHIBA Utilities  
All Programs  
PC Diagnostic Tool.  
Memory  
Slots  
PC2-6400 1GB, 2GB, or 4GB  
Up to 4GB memory module can be installed in  
the memory slot for a maximum of 8GB system  
memory.  
The actual amount of useable system memory will  
be less than the installed memory modules.  
Video RAM  
The memory in a computer’s graphics adaptor  
used to store the image displayed on a bitmap  
display.  
The amount of Video RAM available is dependent  
on the computer’s system memory.  
Start  
Personalization  
Display Settings.  
Control Panel  
Appearance and  
Personalization  
The amount of Video RAM can be verified by  
clicking the Advanced Settings... button in the  
Display Settings window.  
If your computer is configured with more than 3 GB memory, the memory  
might be displayed as approximately 3 GB only (depending on the computer’s  
hardware specifications).  
This is correct because the operating system usually displays the available  
memory instead of the physical memory (RAM) built into the computer.  
Various system components (like the video adapter’s GPU and PCI devices  
like Wireless LAN, etc.) require their own memory space. Since a 32-bit  
operating system cannot address more than 4 GB of memory, these system  
resources overlap the physical memory. It is a technical limitation that the  
overlapped memory is not available to the operating system. Even though  
some tools might display the actual physical memory built into your computer,  
the memory available to the operating system will still be approximately 3 GB  
only.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-3  
 
Introduction  
Power  
Battery Pack  
Your computer is powered by a rechargeable  
lithium-ion battery pack.  
RTC Battery  
AC Adaptor  
The internal RTC battery backs up the Real Time  
Clock and calendar.  
The AC adaptor provides power to the system  
and recharges the batteries when they are low.  
It comes with a detachable power cord that will  
either have a 2-pin or 3-pin plug enclosure.  
Because it is universal, it can receive a range of  
AC voltage from 100 to 240 volts. However, the  
output current varies among different models.  
Using the wrong model can damage your  
computer. Refer to the AC adaptor section in  
Chapter 2, The Grand Tour.  
Disks  
Hard Disk Drive  
(HDD) or Solid  
State Drive (SSD)  
This computer is equipped with one of the  
following hard disk drive (HDD) or solid state drive  
(SSD) types. The capacity of each HDD or SSD  
model is different.  
n
HDD  
120 GB  
n
n
n
n
n
n
n
160 GB  
200 GB  
250 GB  
320 GB  
400 GB  
500 GB  
n
SSD  
64 GB  
n
Please note that part of the hard disk or solid  
state drive’s overall capacity is reserved as  
administration space.  
Other hard disk drives may be introduced in the  
future.  
n
n
In this manual, the word “HDD” or “Hard disk drive” also refers to SSD  
unless otherwise stated.  
SSD is a large-capacity storage media which uses Solid-State Memory in  
place of a magnetic disk of the hard disk.  
Under certain unusual conditions of prolonged non-use and/or exposure to  
high temperatures, the SSD may be vulnerable to data retention errors.  
1-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction  
Optical disc drive  
DVD Super Multi  
(+-R DL) drive  
Some models are equipped with a full-size DVD  
Super Multi (+-R DL) drive module that allows you  
to record data to rewritable CD/DVDs as well as  
run CD/DVDs without using an adaptor. It reads  
DVD-ROMs at maximum 8 speed and CD-ROMs  
at maximum 24 speed. It writes CD-R at up to 24  
speed, CD-RW at up to 24 speed, DVD-R at up to 8  
speed, DVD-RW at up to 6 speed, DVD-RAM at up  
to 5 speed, DVD+R at up to 8 speed, DVD-RW at up  
to 8 speed, DVD+R DL at up to 6 speed and DVD_R  
DL at up to 6 speed. This drive supports the following  
formats:  
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
DVD-ROM  
DVD-Video  
DVD-R  
DVD-RW  
DVD+R  
DVD+RW  
DVD-RAM  
DVD+R DL  
DVD-R DL  
CD-DA  
CD-Text  
CD-R  
CD-RW  
CD-ROM Mode 1, Mode 2  
CD-ROMXA Mode 2 (Form 1, Form 2)  
CD-G (Audio CD only)  
Photo CD (single/multi-session)  
Enhanced CD (CD-EXTRA)  
Addressing Method 2  
2.6 GB and 5.2 GB DVD-RAM media cannot be read from or write to.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-5  
 
Introduction  
Display  
The computer’s LCD panel supports high-resolution video graphics.  
The screen can be set at a wide range of viewing angles for  
maximum comfort and readability.  
Display panel  
13.3” WXGA CSV with 1280 horizontal × 800  
vertical pixels.  
Graphics Controller  
Graphics controller maximizes display  
performance. Refer to Appendix B, Display  
Controller for more information.  
Keyboard  
Built-In  
TOSHIBA Vista keyboard, 86 keys or 87 keys,  
compatible with IBM enhanced keyboard,  
embedded numeric overlay, dedicated cursor  
control,  
and  
keys. Refer to Chapter 5, The  
Keyboard, for details.  
Pointing Device  
Built-In TouchPad  
A TouchPad and control buttons in the palm  
rest enable control of the on-screen pointer and  
scrolling of windows.  
Ports  
HDMI  
This HDMI jack allows you to connect external  
display/audio devices. (Provided with some  
models)  
External Monitor  
This 15-pin port lets you connect an external  
video display.  
Universal Serial  
Bus (USB 2.0)  
The computer has Universal Serial Bus ports that  
comply with the USB 2.0 standard, which enables  
data transfer speeds 40 times faster than the USB  
1.1 standard. (The ports also support USB 1.1.)  
eSATA/USB combo One eSATA/Universal Serial Bus (USB) combo  
port  
enables a chain connection of USB-equipped or  
eSATA-equipped devices to your computer through  
the port.  
1-6  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction  
Slots  
ExpressCard Slot  
The ExpressCard slot that can accommodate two  
standard module formats; an ExpressCard/34  
module and an ExpressCard/54 module. An  
ExpressCard module is a small add-in card  
technology based on the PCI Express and  
Universal Serial Bus (USB) interfaces.  
Bridge Media Card  
Slot  
Supports SD/miniSD/microSD/SDHC memory  
card, MMC, MEMORY STICK, MEMORY STICK  
PRO, MEMORY STICK PRO DUO and xD Picture  
card.  
Multimedia  
Web Camera  
Record/Send still or video images with this  
integrated webcam. (provided with some models)  
Sound System  
A Windows® Sound System that provides  
speakers as well as jacks for an external  
microphone and headphones.  
Special harman/kardon sound system (depending  
on the model you purchased).  
Headphone (S/P  
DIF) jack  
This jack outputs analog audio signals. This jack  
can be used also as S/P DIF jack and enables  
connection of optical digital correspondence  
apparatus.  
Microphone Jack  
SIM Card Slot  
A 3.5 mm mini microphone jack enables  
connection of a three-conductor mini jack for  
monaural microphone input.  
This slot (located underneath the battery pack)  
allows you to transfer information from a standard  
25mm Subscriber identity Module (SIM) card to  
your computer. The SIM card slot is only featured  
on some models.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-7  
Introduction  
Communications  
Modem  
Provides capability for data and fax  
communication. It supports V.90 (V.92). The speed  
of data transfer and fax communication depends  
on the analog telephone line conditions. The  
computer has a modem jack for connection to a  
telephone line. Both V.90 and V.92 are supported  
only in the USA, Canada, France and Germany.  
V.90 is available in other regions.  
Some models are equipped with the integrated  
modem.  
LAN  
The computer has built-in support for Ethernet  
LAN (10 megabits per second, 10BASE-T),  
Fast Ethernet LAN (100 megabits per second,  
100BASE-TX) and Gigabit Ethernet LAN (1000  
megabits per second, 1000BASE-T).  
It is pre-installed as a standard device in some  
markets.  
Wireless LAN  
Some computers in this series are equipped with  
a Wireless LAN module that is compatible with  
other LAN systems based on Direct Sequence  
Spread Spectrum/Orthogonal Frequency Division  
Multiplexing radio technology that complies with  
the IEEE 802.11 standard.  
The transmission speed over the wireless LAN, and the distance over  
which the wireless LAN can reach, may vary depending on surrounding  
electromagnetic environment, obstacles, access point design and  
configuration, client design and software/hardware configurations. The  
transmission rate described is the theoretical maximum speed as specified  
under the appropriate - the actual transmission speed will be lower than the  
theoretical maximum speed.  
Bluetooth  
Some computers in this series are equipped  
with Bluetooth functions. Bluetooth wireless  
technology eliminates the need for cables  
between electronic devices such as computers  
and printers. Bluetooth provides fast, reliable,  
and secure wireless communication in a small  
space. (Provided with some models)  
Wireless  
Communication  
Switch  
This switch turns the Wireless LAN and  
Bluetooth function on and off.  
1-8  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction  
Security  
Security lock slot  
Connects an optional security lock to anchor the  
computer to a desk or other large object.  
Password  
n
n
n
n
Power-on password protection  
Two level password architecture  
HDD password protection  
Fingerprint authentication (not available on  
all models)  
Special features  
The following features are either unique to TOSHIBA computers or are advanced  
features, which make the computer more convenient to use.  
Hot Keys  
Key combinations let you quickly modify the  
system configuration directly from the keyboard  
without running a system configuration program.  
Keypad Overlay  
A ten-key pad is integrated into the keyboard.  
Refer to the Keypad overlay section in Chapter  
5, The Keyboard, for instructions on using the  
keypad overlay.  
Instant Security  
The hot key function Fn + F1 blanks the screen  
and disables the computer, providing data  
security.  
Display Automatic  
Power Off *1  
This feature automatically cuts off power to the  
internal display when there is no keyboard input  
for a specified time. Power is restored when any  
key is pressed.  
This can be specified in the Power Options.  
HDD Automatic  
Power Off *1  
This feature automatically cuts off power to the  
hard disc drive when it is not accessed for a  
specified time. Power is restored when the hard  
disc is accessed.  
This can be specified in the Power Options.  
System Automatic  
Sleep Mode/  
This feature automatically shuts down the system  
into Sleep Mode or Hibernation Mode when there  
is no input or hardware access for a specified  
time.  
Hibernation*1  
This can be specified in the Power Options.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-9  
 
Introduction  
Intelligent Power  
Supply *1  
A microprocessor in the computer’s intelligent  
power supply detects the battery’s charge and  
calculates the remaining battery capacity. It also  
protects electronic components from abnormal  
conditions, such as voltage overload from an AC  
adaptor.  
This can be specified in the Power Options.  
This feature lets you save battery power.  
This can be specified in the Power Options.  
Battery Save Mode *1  
Panel Power On/  
Off*1  
This feature turns power to the computer off  
when the display panel is closed and turns it  
back on when the panel is opened.  
This can be specified in the Power Options.  
Low Battery  
Automatic  
Hibernation*1  
When battery power is exhausted to the point  
that computer operation cannot be continued,  
the system automatically enters Hibernation  
Mode and shuts down.  
This can be specified in the Power Options.  
TOSHIBA HDD  
Protection  
This feature uses the acceleration sensor built  
in the computer to detect vibration and shocks,  
and automatically moves the hard disk drive’s  
read/write head to a safe position in order to  
reduce the risk of damage that could be caused  
by head-to-disk contact. Refer to the Using the  
Chapter 4, Operating Basics, for details.  
n
n
The TOSHIBA HDD Protection function does not guarantee that the hard  
disk drive will not be damaged.  
TOSHIBA HDD Protection cannot be used in models that are equipped  
with SSD.  
1-10  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction  
Hibernation  
Sleep Mode  
This feature allows you to turn off the power  
without exiting from your software. The contents  
of main memory are saved to the hard disk,  
when you turn on the power again, you can  
continue working right where you left off. Refer  
to the Turning Off the Power section in Chapter  
3, Getting Started, for details  
If you have to interrupt your work, you can turn  
off the power without exiting from your software.  
Data is maintained in the computer’s main  
memory. When you turn on the power again, you  
can continue working right where you left off.  
*1 Click  
Options.  
, Control Panel, System and Maintenance, and then click Power  
USB Sleep and  
Charge function  
This feature allows you to charge USB-  
compatible external devices such as mobile  
phones or portable digital music players via the  
USB port when your computer is in Sleep Mode,  
Hibernation Mode, or in the shutdown state.  
This function is worked by the USB Sleep and  
Charge Utility. For more information, please refer  
USB Wakeup  
function  
This function restores the computer from Sleep  
Mode depending on the external devices  
connected to the USB ports.  
For example, if a mouse or USB keyboard is  
connected to a USB port, moving the mouse/  
keyboard will wake up the computer.  
The “USB Wakeup function” operates under  
Windows® Vista operating system and it works  
for all USB ports.  
TOSHIBA PC Health  
Monitor  
The TOSHIBA PC Health Monitor software  
program monitors computer system functions  
such as power consumption, the cooling system  
and HDD/SSD Alert. It alerts users of specific  
system conditions via pop-up messages. It  
also tracks the usage of the computer and  
related devices, logging the service relevant  
informationon the computer’s hard disk drive.  
Refer to Appendix E, TOSHIBA PC Health  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-11  
 
Introduction  
TOSHIBA Value Added Package  
This section describes the TOSHIBA Component features pre-installed on the  
computer.  
TOSHIBA Power  
Saver  
TOSHIBA Power Saver provides you with  
the features of more various power supply  
managements.  
TOSHIBA Zooming  
Utility  
This utility allows you to enlarge or reduce  
the icon size on the Windows Desktop, or the  
zoom factor associated with specific supported  
applications.  
TOSHIBA PC  
Diagnostic Tool  
The TOSHIBA PC Diagnostic Tool will display  
basic system configuration information and allow  
the functionality of some of the computer’s built-  
in hardware devices to be tested.  
TOSHIBA Flash  
Cards  
This utility supports the following functions.  
n
n
Hot key function  
TOSHIBA utility launcher function  
TOSHIBA  
Components  
Common Driver  
TOSHIBA Components Common Driver  
contains the module required for the utility which  
TOSHIBA offers.  
TOSHIBA  
Accessibility  
The TOSHIBA Accessibility utility provides  
support to movement impaired users when they  
need to use the TOSHIBA Hot-key functions. In  
use, the utility allows you to make the Fn key  
‘sticky’, that is you can press it once, release  
it, and then press one of the ‘F’ keys in order  
to access its specific function. When set, the  
Fn key will remain active until another key is  
pressed.  
TOSHIBA Button  
Support  
The computer includes the following buttons:  
n
n
CD/DVD button  
Mute button  
The starting application from the button can be  
changed.  
1-12  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction  
Utilities and Applications  
This section describes pre-installed utilities and tells how to start them. For details  
on operations, refer to each utility’s online manual, help files or readme.txt files.  
TOSHIBA Assist  
HW Setup  
TOSHIBA Assist is a graphical user interface that  
provides easy access to help and services.  
This program lets you customize your hardware  
settings according to the way you work with your  
computer and the peripherals you use. To start  
the utility, double click the TOSHIBA Assist on  
your desktop, select OPTIMIZE tab, and click  
TOSHIBA Hardware Settings.  
Power On Password  
Two levels of password security, supervisor  
and user, are available to prevent unauthorized  
access to your computer.  
To register a supervisor password, double click  
the TOSHIBA Assist on your desktop select  
the SECURE tab and start the Supervisor  
password utility.  
To set a user password, select the SECURE  
tab on TOSHIBA Assist, then start the User  
password utility. On the Password tab you can  
register a user password.  
Corel DVD  
MovieFactory for  
TOSHIBA  
You can edit digital video and make a DVD-  
Video and support Labelflash™ function.  
TOSHIBA DVD  
PLAYER  
The DVD PLAYER is used to play DVD Video. It  
has an on-screen interface and function.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-13  
 
Introduction  
Fingerprint Utility  
This product has a fingerprint utility installed  
for the purpose of enrolling and recognizing  
fingerprints which can then be linked to a  
username and password in order to remove the  
need to input these details from the keyboard.  
Just by swiping an enrolled finger against the  
fingerprint sensor, the following functions will be  
enabled:  
n
n
n
n
Logon to Windows and access a security  
enabled homepage through Internet  
Explorer.  
Files and folders can be encrypted  
decrypted and third party access to them is  
prevented.  
Disable the password-protected screen-  
saver when returning from a power-saving  
mode such as Sleep Mode.  
Authentication of the User Password (and,  
if applicable, the HDD(Hard Disk Drive)  
Password) when booting up the computer  
(Power-on Security).  
n
Single Sign-on feature  
n
Fingerprint security cannot be used in models that do not have a  
fingerprint module installed.  
n
The HDD (Hard Disk Drive) Password can be registered in the BIOS  
Setup. If you forget your HDD Password, TOSHIBA will NOT be able  
to assist you, and your HDD will be rendered COMPLETELY and  
PERMANENTLY INOPERABLE. TOSHIBA will NOT be held responsible  
for any loss of any data, any loss of use or access to your HDD, or for  
any other losses to you or any other person or organization that result  
from the loss of access to your HDD. If you can’t accept this risk, don’t  
register the HDD Password.  
TOSHIBA Face  
Recognition  
TOSHIBA Face Recognition uses a face  
verification library to verify the face data of users  
when they log in to Windows. If the verification is  
successful, the user will be logged into Windows  
automatically. The user can thus avoid having to  
enter a password or the like, which makes the  
login process easier.  
1-14  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction  
Bluetooth Stack  
for Windows® by  
Toshiba  
This software enables communication between  
the computer and external Bluetooth devices  
such as printers and mobile phones.  
Bluetooth functions cannot be used in models that do not have a Bluetooth  
module installed.  
TOSHIBA SD  
Memory Card  
Format  
This utility allows you to format an SD/SDHC  
memory card by the SD standard format.  
n
n
SD Memory Card Format Utility and other SD functions are packaged into  
TOSHIBA SD Memory Utilities.  
Only the SD Memory Boot Utility can create a bootable SD memory card.  
TOSHIBA DVD-RAM  
Utility  
TOSHIBA DVD-RAM Utility has a Physical  
Format function and Write-Protect function to  
DVD-RAM.  
This utility is contained in the TOSHIBA Disc  
Creator setup module.  
To run TOSHIBA DVD-RAM Utility, click  
then select All Programs, TOSHIBA, CD&DVD  
Applications, and then click DVD-RAM Utility.  
TOSHIBA Disc  
Creator  
You can create CD/DVDs in several formats  
including audio CDs that can be played on a  
standard stereo CD player and data CDs or  
DVDs to store multimedia and/or document files  
on your hard disk drive. This software can be  
used on a model with the CD-RW/DVD-ROM  
drive, DVD-R/-RW drive, DVD+R/+RW drive and  
DVD Super Multi Double Layer drive.  
To run TOSHIBA Disc Creator, click  
then  
select All Programs, TOSHIBA, CD&DVD  
Applications, and then click Disc Creator.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-15  
 
Introduction  
TOSHIBA ConfigFree  
ConfigFree is a suite of utilities to allow easy  
control of communication device and network  
connections. ConfigFree also allows you to  
find communication problems and create  
profiles for easy switching between location and  
communication networks.  
To run ConfigFree, click  
, select All  
Programs, TOSHIBA, Networking and then  
click ConfigFree.  
Windows Mobility  
Center  
This section describes the Windows Mobility  
Center. Mobility Center is a utility for accessing  
several mobile PC settings quickly in one  
window. A maximum of eight tiles are prepared  
as the operating system default. Two additional  
tiles are also added to your Mobility Center.  
Installing the “TOSHIBA Extended Tiles for  
Windows Mobility Center” package will add the  
following functions.  
n
Lock Computer: Lock your computer  
without turning it off. This has the same  
function as the Lock button at the bottom of  
the right pane of the start menu.  
n
TOSHIBA Assist: Open the TOSHIBA  
Assist if it is already installed in your  
computer.  
TOSHIBA USB Sleep  
and Charge Utility  
This utility is able to either enable or disable the  
USB Sleep and Charge function.  
This utility shows the positions of USB ports that  
support the USB Sleep and Charge function and  
displays the battery’s remaining capacity.  
To start this utility, click Start  
TOSHIBA Utilities  
Charge.  
All Programs  
USB Sleep and  
TOSHIBA HDD/SSD  
Alert  
The TOSHIBA HDD/SSD Alert includes wizard  
functions to monitor the Disk Drive operating  
status and execute the system backup.  
1-16  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction  
Options  
You can add a number of options to make your computer even more powerful and  
convenient to use. Refer to Chapter 8, Optional Devices, for details. The following  
options are available:  
Memory expansion  
A 1GB, 2GB, or 4GB memory module can be  
installed in the memory slot for a maximum of  
8GB system memory.  
Use only PC6400* compatible DDRII memory modules. See your TOSHIBA  
dealer for details.  
* The availability of DDRII depends on the model you purchased.  
Battery pack  
AC Adaptor  
An additional battery pack can be purchased  
from your TOSHIBA dealer. Use it as a spare to  
increase your computer operating time.  
If you use your computer at more than one site  
frequently, it may be convenient to purchase an  
additional AC adaptor for each site so you will  
not have to carry the adaptor with you.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-17  
 
Introduction  
1-18  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Chapter 2  
The Grand Tour  
This chapter identifies the various components of your computer. Become familiar  
with each component before you operate the computer.  
Front with the display closed  
The following figure shows the computer’s front with its display panel in the closed  
position.  
3
4
1
2
5
6
7
Front of the computer with display closed  
1.  
2.  
3.  
4.  
Multiple Digital Media Card Slot  
Wireless Communication Switch  
DC IN LED  
5.  
6.  
7.  
Battery LED  
Bridge Media Slot LED  
HDD/ODD/eSATA LED  
Power LED  
Multiple Digital Media Card Slot  
1
Supports SD/SDHC memory card, MMC, MEMORY STICK,  
MEMORY STICK PRO and xD Picture card  
User’s Manual  
2-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Wireless Communication Switch  
2
Slide this switch to the right of the computer to turn on the  
wireless communication. Slide it to the left to turn off the  
functions.  
n
Turn Wi-Fi and Bluetooth functionalities off when near a person who  
may have a cardiac pacemaker implant or other medical electric device.  
Radio waves may affect pacemaker or medical device operation, possibly  
resulting in serious injury. Follow the instruction of your medical device  
when using any Wi-Fi or Bluetooth functionality.  
n
n
Always turn off Wi-Fi or Bluetooth functionality if the computer is near  
automatic control equipment or appliances such as automatic doors or  
fire detectors. Radio waves can cause malfunction of such equipment,  
possibly resulting in serious injury.  
Do not use the Wi-Fi or Bluetooth functionalities near a microwave oven  
or in areas subject to radio interference or magnetic fields. Interference  
from a microwave oven or other source can disrupt Wi-Fi or Bluetooth  
operation.  
DC IN LED  
3
The DC IN LED indicates the computer is connected to the AC  
adaptor and it is plugged into an AC power source.  
Power LED  
4
The Power indicator glows white when the computer is on. If you  
select Sleep Mode from Turn Off Computer, this indicator flashes  
orange (one second on, two seconds off) while the computer  
enters Sleep Mode.  
Battery LED  
5
The Battery indicator shows the condition of the battery’s charge:  
White indicates a full charge, orange indicates that the battery  
is charging and flashing orange indicates a low battery charge.  
Refer to Chapter 6, Power and Power-Up Modes.  
Bridge Media Slot LED  
6
7
Multiple Digital Media Card Slot LED lights up when the Multiple  
Digital Media Card Slot is accessed.  
(Provided with some models)  
HDD/ODD/eSATA LED  
The HDD/ODD/eSATA indicator glows while the computer  
is accessing a hard disk drive, optical disk drive, or eSATA-  
equipped device.  
2-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Left side  
The following figure shows the computer’s left side.  
2
3
1
4
5
6
7
8
The left side of the computer  
1.  
2.  
3.  
4.  
External Monitor Port*  
Cooling Vents  
5.  
6.  
7.  
8.  
ExpressCard Slot  
Headphone (S/P DIF) Jack  
Microphone Jack  
HDMI*  
eSATA and USB Combo Port  
Universal Serial Bus (USB 2.0) port  
* Provided with some models.  
External Monitor Port  
1
This 15-pin port lets you connect an external video display.  
(Provided with some models.)  
Cooling Vents  
2
Cooling vents help prevent the CPU from overheating.  
Do not block the cooling vents. Keep foreign metal objects, such as screws,  
staples and paper clips, out of the cooling vents. Foreign metal objects can  
create a short circuit, which can cause damage and fire, possibly resulting in  
serious injury.  
HDMI  
3
A jack enables connection of the application of High Definition  
Multimedia Interface, such as DVD Player, LCD Monitor, LCD TV,  
HDTV, Settop- Box and projector.  
(Provided with some models)  
eSATA and USB Combo Port  
4
One eSATA/Universal Serial Bus (USB) combo port complies with  
USB 2.0 standards, which enables data transfer speeds 40 times  
faster than the USB 1.1 standards.  
This combo port also enables a chain connection of USB-  
equipped or eSATA-equipped devices to your computer through  
the port  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-3  
 
ExpressCard Slot  
5
This slot allows you to insert an ExpressCard. An ExpressCard is a  
small, modular add-in card technology based on PCI Express and the  
Universal Serial Bus (USB) interface. The max. transmission rate is  
2.5Gbps. ExpressCard/34 and ExpressCard/54 types are supported.  
Keep foreign metal objects, such as screws, staples and paper clips, out of the  
ExpressCard slot. Foreign metal objects can create a short circuit, which can  
cause damage and fire, possibly resulting in serious injury.  
Headphone (S/PDIF) Jack  
6
This jack outputs analog audio signals. This jack can be used also as  
S/P DIF jack and enables connection of optical digital correspondence  
apparatus.  
Microphone Jack  
7
8
A 3.5 mm mini microphone jack enables connection of a three-  
conductor mini jack for monaural microphone input.  
Universal Serial Bus (USB 2.0) port  
One Universal Serial Bus (USB) port complies with USB 2.0  
standards, which enables data transfer speeds 40 times faster than  
the USB 1.1 standards.  
2-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Right side  
The following figure shows the computer’s right side.  
4
3
2
1
5
6
7
8
9
10  
The right side of the computer  
1.  
2.  
3.  
4.  
5.  
ODD Indicator  
6.  
7.  
8.  
9.  
10  
LAN Jack  
Emergency Eject Hole  
Eject Button  
Modem Jack*  
DC IN Jack  
Optical Disk Drive  
Security Lock  
Slot-Loading ODD*  
Universal Serial Bus (USB 2.0)  
ports  
* Provided with some models.  
ODD Indicator  
1
2
The ODD indicator glows amber when the computer accesses the  
optical disc drive.  
Emergency Eject Hole  
In the event that the disc drive becomes inexplicably locked or  
stops responding press this button to force a manual ejection of the  
ODD tray.  
Eject Button  
3
4
Press this button to open the ODD tray.  
Optical Disc Drive (ODD)  
The computer is configured with a DVD Super Multi (+R DL). Some  
models are equipped with an optical disc drive.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-5  
 
Universal Serial Bus (USB 2.0) port  
5
6
Two Universal Serial Bus (USB) port comply with USB 2.0  
standards, which enables data transfer speeds 40 times faster than  
the USB 1.1 standards.  
LAN Jack  
This jack lets you connect to a LAN. The adaptor has built-in  
support for Ethernet LAN (10 megabits per second, 10BASE-T),  
Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and  
Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).  
The LAN has two indicators. Refer to Chapter 4, Operating Basics,  
for details.  
n
n
Do not connect any cable other than a LAN cable to the LAN jack. It could  
cause damage or malfunction.  
Do not connect the LAN cable to a power supply. It could cause damage  
or malfunction.  
Modem Jack  
7
The modem jack allows you to use a modular cable to connect the  
modem directly to a telephone line. (Depends on the model you  
purchased.)  
n
Connection to any communication line other than an analog  
phone could cause a computer system failure.  
n
Connect the built-in modem only to ordinary analog  
phone lines.  
n
n
Never connect the built-in modem to a digital line (ISDN).  
Never ever connect the built-in modem to the digital  
connector on a public telephone or to a digital private  
branch exchange (PBX).  
n
Never connect the built-in modem to a key telephone  
system for residences or offices.  
n
Avoid using your computer modem with the telephone  
cable connected during an electrical storm. There may be a  
remote risk of electric shock from lightning.  
(Provided with some models.)  
2-6  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DC IN Jack  
8
9
The AC adaptor connects to this socket. Use only the model  
of AC adaptor that comes with the computer. Using the wrong  
adaptor can damage your computer.  
Security Lock  
A security cable attaches to this port. The optional security cable  
anchors your computer to a desk or other large object to deter  
theft.  
Slot-Loading ODD  
10  
Insert your CD/DVD into this slot.  
(Provided with some models)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-7  
Underside  
The following figure shows the underside of the computer. Make sure the display  
is closed before turning over your computer.  
1
2
4
5
6
7
3
The underside of the computer  
1.  
2.  
3.  
4.  
Wireless LAN Module cover  
Cooling Vents  
5.  
6.  
7.  
Battery Pack Lock  
Battery Pack  
Battery Release Latch  
HDD/Memory Module cover  
SIM card slot* (Under the battery pack)  
Wireless LAN Module Cover  
1
2
3
This cover protects the Wireless LAN module.  
Cooling Vents  
Cooling vents help prevent the CPU from overheating.  
Battery Release Latch  
Slide and hold this latch to release the battery pack for removal.  
For detailed information on removing the battery pack, refer to  
Hard Disk and Memory Module Cover  
4
This cover protects the hard disk and the memory module. Refer  
to the Memory expansion section in Chapter 8, Optional Devices.  
2-8  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Battery Pack Lock  
5
6
Slide this lock to prepare the battery pack for removal.  
Battery Pack  
The battery pack powers the computer when the AC adaptor is  
not connected. For detailed information on the battery pack, refer  
to Chapter 6, Power and Power-Up Modes.  
SIM card slot  
7
Located under the battery pack, the SIM card slot allows you  
install a standard 25mm Subscriber Identity Module (SIM) into  
your computer.  
(Provided with some models)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-9  
 
Front with the display open  
This section shows the front of the computer with the display open. Refer to the  
appropriate illustration for details. To open the display, lift the front of the display.  
Position the display at a comfortable viewing angle.  
9
7
8
10  
11  
14  
15  
16  
13  
12  
17  
18  
6
5
5
4
3
2
1
The front of the computer with the display open  
1.  
TouchPad Control Buttons  
Fingerprint Sensor*  
TouchPad  
10.  
11.  
12.  
13.  
14.  
15.  
16.  
17.  
18.  
Built-in Microphone*  
Display Screen  
ECO Button  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
TouchPad On/Off button  
Speakers  
CD/DVD Button  
Play/Pause Button  
Previous Button  
Next Button  
Power Button  
Web Camera*  
Web Camera LED*  
Wireless Antenna* (not shown)  
Mute Button  
Volume Button  
* Provided with some models.  
Please handle your computer carefully to avoid scratching or damaging the  
surface.  
2-10  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TouchPad Control Buttons  
1
2
These let you select menu items or manipulate text and graphics  
designated by the on-screen pointer. Refer to the Using the  
TouchPad section in Chapter 4, Operating Basics.  
Fingerprint Sensor  
Just by swiping the finger against the fingerprint sensor, the  
following functions will be enabled: Log-on to Windows and  
access a security-enabled homepage through IE (Internet  
Explorer) Files and folders can be encrypted/decrypted and third  
party access to them prevented. Disable the password-protected  
screensaver when returning from power-saving (Sleep) mode.  
System boot authentication and Single Touch Boot feature.  
Authentication of the User Password and Hard Disk Drive  
Password when booting up the computer. Refer to the Using the  
fingerprint sensor section in Chapter 4, Operating Basics.  
(Provided with some models)  
TouchPad  
3
A TouchPad located in the centre of the palm rest is used to  
control the on-screen pointer.  
TouchPad On/Off button  
4
5
Turns the TouchPad ON/OFF.  
Speakers  
The speakers emit sound generated by your software as well as  
audio alarms, such as low battery condition, generated by the  
system.  
Power Button  
6
7
Turns the computer on and off and puts it into Hibernation mode  
and wakes it up from Sleep mode.  
Web Camera  
Takes your picture or sends your image to web contacts.  
(Provided with some models)  
Web Camera LED  
8
Web Camera LED indicates web camera is working or not.  
(Provided with some models)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-11  
 
Wireless Antenna (WLAN, 3G)  
9
Some computers in this series are equipped with a WLAN or 3G  
antenna.  
(Provided with some models)  
Built-in microphone  
10  
The Microphone is used with the Web Camera to talk to other  
Web Camera users and to record messages on windows media.  
(Provided with some models)  
Display Screen  
11  
The LCD displays high-contrast text and graphics. Refer to  
Appendix B, Display Controller. When the computer operates  
on the AC adaptor the display screen’s image will be somewhat  
brighter than when it operates on battery power. The lower  
brightness level is intended to save battery power.  
ECO Button  
12  
13  
Press this button to change the TOSHIBA ECO utility. This button  
changes “On” and “Off” of ECO Mode. When ECO Mode is “On”,  
the icon turns green. When ECO Mode is “Off”, the icon turns  
gray.  
CD/ DVD Button  
Pressing this button will launch an application program that  
allows for playing of CDs or DVDs.  
The application that is launched differs by model: Windows Media  
Player/TOSHIBA DVD PLAYER.  
(Provided with some models)  
Play/Pause Button  
14  
15  
16  
Press this button to begin playing an audio CD, a DVD movie or  
digital audio file. This button also acts as a Pause button.  
(Provided with some models)  
Previous Button  
Skips backwards to the previous track, chapter or digital file.  
Refer to Chapter 4, Operating Basics, for details.  
(Provided with some models)  
Next Button  
Skips forward to the next track, chapter or digital file. Refer to  
Chapter 4, Operating Basics, for details.  
(Provided with some models)  
2-12  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Mute Button  
17  
18  
Press this button to Mute volume.  
(Provided with some models)  
Volume Button  
Press (+} to increase or (-) to decrease the volume.  
Optical Disc Drive  
An ATAPI interface controller is used for optical disc operation. When the  
computer is accessing an optical disc, an indicator on the drive glows.  
Region codes for DVD drive and media  
Optical disc drive and their associated media are manufactured according to the  
specifications of six marketing regions. When you purchase DVDVideo, make sure  
it matches your drive, otherwise it will not play properly.  
Code  
Region  
1
2
3
4
Canada, United States  
Japan, Europe, South Africa, Middle East  
Southeast Asia, East Asia  
Australia, New Zealand, Pacific Islands, Central  
America, South America, Caribbean  
5
6
Russia, Indian Subcontinent, Africa, North Korea,  
Mongolia  
China  
Writable discs  
This section describes the types of writable CD discs. Check the specifications of  
your drive for the type of discs it can write. Refer to Chapter 4, Operating Basics.  
CDs  
n
CD-R discs can be written only once. The recorded data cannot be erased or  
changed.  
n
CD-RW discs can be recorded more than once. Use either 1, 2, or 4 multi  
speed CD-RW discs or high-speed 4- to 10-speed discs. The write speed of  
the ultra-speed CD-RW discs is a maximum of 24-speed.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-13  
 
DVD Super Multi Double Layer drive  
The full-size DVD Super Multi (+-R DL) drive module lets you record data to  
rewritable CD/DVDs as well as run either 12 cm (4.72”) or 8cm (3.15”) CD/DVDs  
at Tray ODD and 12 cm (4.72”) CD/DVDs at slot ODD without using an adaptor.  
The read speed is slower at the center of a disc and faster at the outer edge.  
DVD read  
8 speed (maximum)  
DVD-R write  
DVD-R DL write  
DVD-RW write  
DVD+R write  
DVD+R DL write  
DVD+RW write  
DVD-RAM write  
CD read  
8 speed (maximum)  
4 speed (maximum)  
6 speed (maximum)  
8 speed (maximum)  
4 speed (maximum)  
8 speed (maximum)  
5 speed (maximum)  
24 speed (maximum)  
24 speed (maximum)  
16 speed (maximum, high-speed media)  
CD-R write  
CD-RW write  
Use only round standard (12 cm) discs with this slot-loading optical drive. Any  
other size or shape disc may not be able to be removed from the slot and may  
damage the system as well as the disc.  
AC adaptor  
The AC adaptor converts AC power to DC power and reduces the voltage supplied  
to the computer. It can automatically adjust to any voltage from 100 to 240 volts  
and to a frequency of either 50 or 60 hertz, enabling you to use the computer in  
almost any country/region.  
To recharge the battery, simply connect the AC adaptor to a power source and the  
computer. Refer to Chapter 6, Power and Power-Up Modes, for details.  
2-14  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The AC adaptor  
n
Use Depending on the model in question, either a 2-pin or 3-pin adaptor/  
power lead will be bundled with the computer.  
n
n
Do not use a 3-pin to 2-pin conversion plug.  
The supplied power cord conforms to safety rules and regulations in the  
region the product is bought and should not be used outside of this region.  
In order to use the adaptor/computer in other regions, you should please  
buy a power cord that conforms to the safety rules and regulations in that  
particular region.  
Always use the TOSHIBA AC adaptor that was included with your computer,  
or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other  
damage to the computer. Use of an incompatible AC adaptor could cause  
fire or damage to the computer possibly resulting in serious injury. TOSHIBA  
assumes no liability for any damage caused by use of an incompatible  
adaptor.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-15  
 
2-16  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Chapter 3  
Getting Started  
This chapter provides basic information to get you started using your computer. It  
covers the following topics:  
n
n
All users should be sure to read the section Starting up for the first time.  
Be sure to read the enclosed Instruction Manual for Safety and Comfort  
for information on the safe and proper use of this computer. It is intended  
to help you be more comfortable and productive while using a notebook  
computer. By following the recommendations in it you may reduce your  
chance of developing a painful or disabling injury to your hand, arms,  
shoulders or neck.  
n
n
n
n
n
n
n
n
n
n
Connecting the AC adaptor  
Opening the display  
Turning on the power  
Windows Vista™ setup  
Turning off the power  
Restarting the computer  
System Recovery Options  
Create Optical Recovery Discs  
Restoring the preinstalled Software from the Recovery HDD  
Restoring the Preinstalled Software from Recovery Media  
n
Use a virus-check program and make sure it is updated regularly.  
n
Never format storage media without checking its content - formatting  
destroys all stored data.  
n
It is a good idea to periodically back up the internal hard disk drive or  
other main storage device to external media. General storage media is not  
durable or stable over long periods of time and under certain conditions  
may result in data loss.  
n
Before you install a device or application, save any data in memory to the  
hard disk drive or other storage media. Failure to do so may result in the  
loss of data.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-1  
 
Getting Started  
Connecting the AC adaptor  
Attach the AC adaptor when you need to charge the battery or you want to  
operate from AC power. It is also the fastest way to get started, because the  
battery pack will need to be charged before you can operate from battery power.  
The AC adaptor can be connected to any power source supplying from 100 to 240  
volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery  
pack, refer to Chapter 6, Power and Power-Up Modes.  
n
Always use the TOSHIBA AC adaptor that was included with your  
computer or use AC adaptors specified by TOSHIBA to avoid any risk of  
fire or other damage to the computer. Use of an incompatible AC adaptor  
could cause fire or damage to the computer possibly resulting in serious  
injury. TOSHIBA assumes no liability for any damage caused by use of an  
incompatible adaptor.  
n
n
n
Never plug the AC adaptor into a power source that does not correspond  
to both the voltage and the frequency specified on the regulatory label of  
the unit. Failure to do so could result in a fire or electric shock, possibly  
resulting in serious injury.  
Always use or purchase power cables that comply with the legal voltage  
and frequency specifications and requirements in the country of use.  
Failure to do so could result in a fire or electric shock, possibly resulting in  
serious injury.  
The supplied power cord conforms to safety rules and regulations in the  
region the product is bought and should not be used outside this region.  
For use in other regions, please buy power cords that conform to safety  
rules and regulations in the particular region.  
n
n
Do not use a 3-pin to 2-pin conversion plug.  
When you connect the AC adaptor to the computer, always follow the  
steps in the exact order as described in the User’s Manual. Connecting  
the power cable to a live electrical outlet should be the last step otherwise  
the adaptor DC output plug could hold an electrical charge and cause an  
electrical shock or minor bodily injury when touched. As a general safety  
precaution, avoid touching any metal parts.  
n
n
Never place your computer or AC adaptor on a wooden surface, furniture,  
or any other surface that could be marred by exposure to heat since the  
computer base and AC adaptor’s surface increase in temperature during  
normal use.  
Always place your computer or AC adaptor on a flat and hard surface that  
is resistant to heat damage.Refer to the enclosed Instruction Manual for  
Safety and Comfort for detailed precautions and handling instructions.  
3-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started  
1
Connect the power cord to the AC adaptor.  
Connecting the power cord to the AC adaptor  
Enter a 2-pin or 3-pin adaptor/cord will be included with the computer  
depending on the model.  
2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the  
right side of the computer.  
Connecting the adaptor to the  
3. Plug the power cord into a live wall outlet.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-3  
Getting Started  
Opening the display  
The display panel can be rotated in a wide range of angles for optimal viewing.  
Lift the panel up and adjust it to the best viewing angle for you.  
Use reasonable care when opening and closing the display panel. Opening it  
vigorously or slamming it shut could damage the computer.  
Opening the display  
n
n
When opening the panel, please be careful not to force it beyond the  
point where it moves easily.  
Be careful not to open the display panel too far as this could put stress on  
the display panel’s hinges and cause damage.  
n
n
n
Do not press or push on the display panel.  
Do not lift the computer by the display panel.  
Do not close the display panel with pens or any other objects left in  
between the display panel and the keyboard.  
n
When opening or closing the display panel, place one hand on the palm  
rest to hold the computer in place and use the other hand to slowly open  
or close the display panel (Do not use excessive force when opening or  
closing the display panel).  
3-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started  
Turning on the power  
This section describes how to turn on the power.  
After you turn on the power for the first time, do not turn it off until you have set  
up the operating system. Refer to the section Windows Vista™ setup.  
Press and hold the computer’s power button for two or three seconds.  
Turning on the power  
Windows Vista™ setup  
When you first turn on the power, the computer’s initial screen is the Microsoft®  
Windows Vista™ Startup Screen Logo.  
Follow the on-screen directions.  
Be sure to read the Windows End User License Agreement display  
carefully.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-5  
 
Getting Started  
Turning off the power  
The power can be turned off in one of the following modes: Shut down (Boot),  
Hibernation or Sleep Mode.  
Shut Down mode (Boot mode)  
When you turn off the power in Shut Down mode no data is saved and the  
computer will boot to the operating system’s main screen.  
1. If you have entered data, save it to the hard disk.  
2. Make sure all disk (disc) activity has stopped, then remove the CD/DVDs.  
Make sure the Disk LED indicator is off. If you turn off the power while a disk  
(disc) is being accessed, you can lose data or damage the disk (disc).  
3. Click  
button  
then click the arrow icon  
located in the power management  
. From the pull down menu, choose Shut Down.  
4. Turn off the power to any peripheral devices.  
Do not turn the computer or devices back on immediately. Wait a moment to  
let all capacitors fully discharge.  
Sleep Mode  
If you have to interrupt your work, you can turn off the power without exiting from  
your software. Data is maintained in the computer’s main memory. When you turn  
on the power again, you can continue working right where you left off.  
When you have to turn off your computer aboard an aircraft or in places where  
electronic devices are regulated or controlled, always completely shut down  
the computer. This includes turning off any wireless communication switches  
or devices, and canceling settings that reactivate the computer automatically,  
such as a timer recording function. Failure to completely shut down the  
computer in this way could allow the operating system to reactivate and run  
pre-programmed tasks or preserve unsaved data, which could interfere with  
aviation or other systems, possibly causing serious injury.  
3-6  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started  
n
n
When the AC adaptor is connected, the computer will go into Sleep Mode  
according to the settings in the Power Options.  
To restore operation from Sleep Mode, press the power button or press  
any key. The latter action works only if Wake-up on Keyboard is enabled  
in HW Setup.  
n
n
If the computer automatically enters Sleep Mode while a network  
application is active, the application might not be restored when the  
computer wakes up from Sleep Mode.  
To prevent the computer from automatically entering Sleep Mode, disable  
Sleep Mode in the Power Options. That action, however, will nullify the  
computer’s Energy Star compliance.  
n
n
Before entering Sleep Mode, be sure to save your data.  
Do not install or remove a memory module while the computer is in Sleep  
Mode. The computer or the module could be damaged.  
n
Do not remove the battery pack while the computer is in Sleep Mode  
(unless the computer is connected to an AC power source). Data in  
memory will be lost.  
Benefits of Sleep Mode  
The Sleep Mode feature provides the following benefits:  
n
n
Restores the previous working environment more rapidly than does  
Hibernation Mode.  
Saves power by shutting down the system when the computer receives no  
input or hardware access for the duration set by the System Sleep Mode  
feature.  
n
You can use the panel power off feature.  
Entering Sleep Mode  
You can enter Sleep Mode in one of three ways:  
n
Click Start then click the power button (  
management buttons ( ).  
Please note that this feature must be enabled within the Power Options  
) located in the power  
(to access it, click  
Control Panel  
System and Maintenance  
Power Options).  
n
Click  
, click power button  
located in the power management  
and select Sleep from the  
buttons  
menu.  
, or click arrow button  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-7  
Getting Started  
n
Close the display panel. This feature must be enabled. Please refer to  
the Power Options (to access it, click Control Panel System  
and Maintenance Power Options).  
When you turn the power back on, you can continue where you left when you shut  
down the computer.  
You can also enable Sleep Mode by pressing Fn + F3. Refer to Chapter 5,  
The Keyboard, for details.  
n
n
When the computer is shut down in Sleep Mode, the power indicator  
flashes orange.  
If you are operating the computer on battery power, you can lengthen  
the operating time by turning it off into Hibernation Mode, as Sleep Mode  
consumes more power.  
Sleep Mode limitations  
Sleep Mode will not function under the following conditions:  
n
n
Power is turned back on immediately after shutting down.  
Memory circuits are exposed to static electricity or electrical noise.  
Hibernation Mode  
The hibernation feature saves the contents of memory to the hard disk when the  
computer is turned off. The next time the computer is turned on, the previous state  
is restored. The hibernation feature does not save the status of peripheral devices.  
n
Save your data. While entering Hibernation Mode, the computer saves  
the contents of memory to the HDD. However, for safety sake, it is best to  
save your data manually.  
n
n
Data will be lost if you remove the battery or disconnect the AC adaptor  
before the save is completed. Wait for the disk indicator to go out.  
Do not install or remove a memory module while the computer is in  
Hibernation Mode. Data will be lost.  
3-8  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started  
Benefits of Hibernation Mode  
The Hibernation Mode feature provides the following benefits:  
n
n
n
Saves data to the hard disk when the computer automatically shuts down  
because of a low battery.  
You can return to your previous working environment immediately when  
you turn on the computer.  
Saves power by shutting down the system when the computer receives  
no input or hardware access for the duration set by the System hibernate  
feature.  
n
You can use the panel power off feature.  
Starting Hibernation Mode  
You can also enable Hibernation Mode by pressing Fn + F4. Refer to Chapter  
5, The Keyboard, for details.  
To enter Hibernation Mode, follow the steps below.  
1. Click  
.
2. Click the arrow icon  
.
located in the power management button  
3. From the pull down menu, select Hibernate.  
Automatic Hibernation Mode  
The computer will enter Hibernation mode automatically when you press the  
power button or close the Display Screen. First, however, make the appropriate  
settings according to the steps below.  
1. Open the Control Panel.  
2. Open System and Maintenance and open Power Options.  
3. Select the Choose what the power button does.  
4. Enable the desired Hibernation settings for When I press the power button  
and When I close the lid.  
5. Click the Save changes button.  
Data saving in Hibernation Mode  
When you turn off the power in Hibernation Mode, the computer takes a moment  
to save current memory data to the hard disk. During this time, the disk indicator  
will light.  
After you turn off the computer and memory is saved to the hard disk, turn off the  
power to any peripheral devices.  
Do not turn the computer or devices back on immediately. Wait a moment to  
let all capacitors fully discharge.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-9  
Getting Started  
Restarting the computer  
Certain conditions require that you reset the system. For example, if:  
n
n
You change certain computer settings.  
An error occurs and the computer does not respond to your keyboard  
commands.  
n
There are three ways to reset the computer system:  
1. Click  
button  
then click the arrow icon  
located in the power management  
, and select Restart from pull down menu.  
2. Press Ctrl + Alt + Del to display the menu window, then select Restart from  
the Shut down options.  
3. Press the power button and hold it down for five seconds. Once the  
computer has turned itself off, wait between ten and fifteen seconds before  
turning it on again with the power button.  
System Recovery Options  
About 1.5GB hidden partition is allocated on the hard drive for the System  
Recovery Options.  
The System Recovery Options feature will be unusable if this partition is  
deleted.  
System Recovery Options  
The System Recovery Options feature is installed on the hard disk when shipped  
from the factory. The System Recovery Options menu includes some tools to  
repair startup problems, run diagnostics or restore the system.  
You can see the more information about “Startup Repair” in “Windows Help and  
Support” content.  
The System Recovery Options can also be run manually to repair problems.  
The procedure is as follows. Follow the instructions shown on the onscreen menu.  
1. Turn off the computer.  
2. While holding the F8 key, turn the computer on.  
3. The Advanced Boot Options menu will be displayed.  
Use the arrow keys to select Repair Your Computer and press Enter.  
4. Follow the on-screen instructions.  
The Windows Vista CompletePC Backup feature can be used on Windows  
Vista™ Business Edition and Ultimate Edition.  
3-10  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started  
Create Optical Recovery Discs  
A recovery image of your computer is stored on the hard disk. You may use this  
image to create DVD recovery discs using the following steps:  
1. Select DVD media.  
2. The application will allow you to choose a type of media to create recovery  
DVD including: DVD-R, DVD-RW, DVD+R and DVD+RW.  
Some media may not be compatible with the Optical Drive of your computer.  
Please verify your Optical Drive supports the blank media you choose.  
3. Turn on your computer to open Windows Vista.  
4. Insert the (first) blank media into the tray of the Optical Drive.  
5. Double-click the Recovery Disc Creator icon on the Windows Vista desktop,  
or select the application from Start menu.  
6. After TOSHIBA Recovery Disc Creator starts, select the type of media and the  
title you wish to copy to the media then click the Create button.  
Restoring the preinstalled software from  
the Recovery HDD  
Part of the space on the hard disk drive is reserved as recovery partition for  
restoring the pre-installed software from the hard disk drive.  
When re-setting up your hard disk, do not change, delete or add partitions in a  
manner other than specified in the manual. Otherwise, space for software may be  
destroyed.  
In addition, if you use a third-party partitioning program to reconfigure partitions on  
your hard disk, it may become impossible to re-setup your computer.  
1. Turn off your computer.  
2. Hold down the 0 (zero) key on the keyboard and turn on your computer. When  
“TOSHIBA Leading Innovation >>>” appears, release the 0 (zero) key on the  
keyboard.  
3. A menu appears. Follow the on-screen instructions.  
You can not use System Recovery Options if restoring the pre-installed  
software without System Recovery Options.  
When you reinstall the Windows operating system, the hard disk will be  
reformatted and all data will be lost.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-11  
 
Getting Started  
Restoring the preinstalled software from  
Recovery Media  
If the preinstalled files are damaged, use the Recovery Media you created, or  
HDD recovery to restore them. To restore the operating system and all preinstalled  
software, follow the steps below.  
When you reinstall the Windows operating system, the hard disk will be  
reformatted and all data will be lost.  
1. Load the Recovery Media in the optional optical media drive and turn off the  
computer’s power.  
2. Hold down the F12 key and turn on the power. When TOSHIBA Leading  
Innovation >>> appears, release the F12 key.  
3. Use the upper or lower cursor key to select the CD/DVD in the display menu.  
For details, refer to the Boot Priority section in Chapter 7, HW Setup.  
4. A menu appears. Follow the on-screen instructions.  
When you removed pre-installed drivers/ utilities or when installing, you can  
setup the respective drivers/ utilities from “TOSHIBA Applications and Drivers”  
on desktop.  
3-12  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Chapter 4  
Operating Basics  
This chapter gives information on basic operations including using the TouchPad,  
optical media drives, sound system, modem, the wireless LAN and LAN. It also  
provides tips on caring for your computer.  
Using the TouchPad  
To use the TouchPad, simply touch and move your finger tip across it in the  
direction you want the on-screen pointer to go.  
2
1
TouchPad and TouchPad control buttons  
1.  
TouchPad Control Buttons  
2.  
TouchPad  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-1  
 
Operating Basics  
Two buttons below the keyboard are used like the buttons on a mouse pointer.  
Press the left button to select a menu item or to manipulate text or graphics  
designated by the pointer. Press the right button to display a menu or other  
function depending on the software you are using.  
Do not press on the TouchPad too hard or press a sharp object such as a ball  
point pen against the TouchPad. The TouchPad could be damaged.  
For some functions, you can tap the TouchPad instead of pressing a control  
button.  
Click: Tap the TouchPad once  
Double-click: Tap the TouchPad twice  
Drag and drop:  
1. Hold down the left control button and move the cursor to drag the item  
you want to move.  
2. Lift your finger to drop the item where you want it.  
Scroll:  
Vertical: Move your finger up or down the right edge of the TouchPad.  
Horizontal: Move your finger left or right along the bottom edge of the  
TouchPad.  
Using the fingerprint sensor  
This product has a fingerprint utility installed for the purpose of enrolling and  
recognizing fingerprints. By enrolling the ID and password to the fingerprint  
authentication device, it is no longer necessary to input the password from the  
keyboard. Just by swiping the finger against the fingerprint sensor, the following  
functions will be enabled:  
n
n
n
Logon to Windows and access a security-enabled homepage through IE  
(Internet Explorer).  
Files and folders can be encrypted/decrypted and third party access to them  
prevented.  
Disable the password-protected screen-saver when returning from power-  
saving (Sleep) mode.  
n
n
Pre-OS feature and Single Sign-On feature.  
Authentication of the User Password and Hard Disk Password when booting  
up the computer.  
To swipe” refers to the action of reading a fingerprint using the fingerprint  
sensor.  
4-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
How to swipe the finger  
Using the following steps when swiping fingers for fingerprint registration or  
authentication will help to minimize authentication failures:  
1. Align the first joint of the finger to the center of the sensor. Lightly touch the  
sensor and swipe finger levelly towards you.  
2. While lightly touching the sensor, swipe the finger towards you until the sensor  
surface becomes visible.  
3. Ensure the center of the fingerprint is on the sensor when swiping the finger.  
Slide the finger over the recognition sensor  
n
n
Avoid swiping with the finger stiff or pressed-on too hard:  
Fingerprint reading may fail if the center of the fingerprint is not touching  
on the sensor, or when finger is swiped while pressing hard. Make sure  
that the center of the fingerprint is touching the sensor before swiping.  
Confirm the center of the fingerprint whirl before swiping:  
The thumb’s fingerprint has a bigger whirl, which is prone to misalignment  
and distortions. This will cause difficulty in registration and a drop in the  
authentication success rate. Always confirm the center of the fingerprint  
whirl so that it is swiped along the centerline of the sensor.  
n
When fingerprint reading is not successful:  
There is a possibility of authentication failures if the finger is swiped too  
quickly or too slowly. Follow the onscreen instructions to adjust the speed  
of the swipe.  
User’s Manual  
4-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
Points to note about the fingerprint sensor  
Failure to follow these guidelines might result in (1) damage to the sensor or  
cause sensor failure, (2) finger recognition problems, or lower finger recognition  
success rate.  
n
n
n
Do not scratch or poke the sensor with your nails or any hard or sharp objects.  
Do not press the sensor strongly.  
Do not touch the sensor with a wet finger or any wet objects. Keep sensor  
surface dry and free of water vapor.  
n
Do not touch the sensor with a soiled finger. Minute foreign particles on a  
soiled or dirty finger may scratch the sensor.  
n
n
Do not paste stickers or write on the sensor.  
Do not touch the sensor with a finger or any object with built-up static  
electricity.  
Observe the following before you place your finger on the sensor whether for  
fingerprint enrollment/registration or recognition.  
n
n
Wash and dry your hands thoroughly.  
Remove static electricity from your fingers by touching any metal surface.  
Static electricity is a common cause of sensor failures, especially when the  
weather is dry.  
n
n
Clean the sensor with a lint-free cloth. Do not use detergent to clean the  
sensor.  
Avoid the following finger conditions for enrollment or recognition as they may  
result in fingerprint enrollment errors or a drop in the fingerprint recognition  
success rate  
n
n
n
n
n
Soaked or swollen finger (e.g. after taking bath)  
Injured finger  
Wet finger  
Soiled or oily finger  
Extremely dry skin condition on finger  
Observe the following to improve the fingerprint recognition success rate.  
n
n
Enroll two or more fingers.  
Enroll additional fingers if recognition failure occurs often using enrolled  
fingers.  
n
Check your finger condition. Changed conditions, such as injured, rough,  
extremely dry, wet, soiled, dirty, oily, soaked, swollen fingers, may lower the  
recognition success rate. Also if the fingerprint is worn down or the finger  
becomes thinner or fatter, the recognition success rate may be lowered.  
4-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
n
The fingerprint for each finger is different and unique. Please ensure that only  
the registered or enrolled fingerprint or fingerprints are used for identification.  
n
n
Check sliding position and speed.  
The fingerprint sensor compares and analyzes the unique characteristics in a  
fingerprint. However, there may be instances where certain users are unable  
to register their fingerprints due to insufficient unique characteristics in their  
fingerprints.  
n
The recognition success rate may differ from user to user.  
Fingerprint sensor limitations  
n
The fingerprint sensor compares and analyzes the unique characteristics in a  
fingerprint.  
n
A warning message will be displayed when recognition is abnormal or  
recognition is not successful within a fixed duration.  
n
n
The recognition success rate may differ from user to user.  
Toshiba does not guarantee that this fingerprint recognition technology will be  
error-free.  
n
Toshiba does not guarantee that the fingerprint sensor will recognize the  
enrolled user or accurately screen out unauthorized users at all times. Toshiba  
is not liable for any failure or damage that might arise out of the use of this  
fingerprint recognition software or utility.  
Points to note about the fingerprint utility  
n
If Windows Vista™’s file encryption function EFS (Encryption File System) is  
used to encrypt a file, the file cannot be further encrypted using the encryption  
function of this software.  
n
You can back up the fingerprint data or the information registered to Automatic  
password input in IE.  
n
n
Please use Import/Export on TOSHIBA Fingerprint Utility main menu.  
Please also refer to the fingerprint utility Help file for more information.  
You can start it using the following method:  
n
Click Start, point to All Programs, point to TOSHIBA, point to Utilities,  
point to TOSHIBA Fingerprint Utility and click it. The main screen is  
displayed. Click “?” in the lower left corner of the screen.  
Set up procedure  
Please use the following procedure when first using fingerprint authentication.  
Fingerprint registration  
Enroll the required authentication data using the Fingerprints Enrollment Wizard.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-5  
Operating Basics  
n
n
The fingerprint authentication uses the same Windows logon ID and  
password. If the Windows logon password has not been setup, please do  
so before registration.  
This sensor has memory space for at least 20 fingerprint patterns. You  
might be able to register more fingerprint patterns depending on the  
sensor memory usage.  
1. Click Start, point to All Programs, point to TOSHIBA, point to Utilities, point  
to TOSHIBA Fingerprint Utility and click it. Or double click the icon in the  
Task Bar.  
2. The Enter Windows Password screen is displayed. Enter a password into the  
Enter Windows Password field. Click Next.  
3. The Enroll screen is displayed. Click the non-enrolled finger icon above the  
finger and click Next.  
4. The note for enrollment operation screen is displayed. Confirm the message  
and click Next.  
5. The Scanning Practice screen is displayed. You can practice swiping your  
finger. When you have finished practicing swiping your finger, click Next.  
6. The last step for enrollment screen is displayed. Swipe three times with the  
same finger. If scan of fingerprint succeeds, “ Enrollment succeed. Do  
you want to save this template?” will show, click “OK”.  
7. In case of finger injury or authentication failure, it is recommended that  
another fingerprint also be enrolled. The following message will be displayed:  
[Strongly recommended to do one more enroll.]Click OK and  
repeat steps 3, 4, 5 and 6 with another finger.  
How to delete the fingerprint data  
Saved fingerprint data is stored in the Non-volatile memory inside the fingerprint  
sensor. If you hand over the PC to others, or dispose of it, the following operations  
are recommended.  
1. Click Start, point to All Programs, point to TOSHIBA, point to Utilities, point  
to TOSHIBA Fingerprint Utility and click it. .  
2. The TOSHIBA Fingerprint Utility main menu is displayed.  
3. “Are you sure you want to delete this template?” will  
be displayed on screen, click OK button. If you want to delete the other  
fingerprints, repeat step 2, 3.  
n
To delete for all user’s fingerprints:  
1. Click “Run as administrator” in lower left. If UAC setting for Windows  
is off, this button will not appear.  
4-6  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
2. User Account Control window is displayed when you click a Run as  
administrator. Select Allow on User Account Control window.  
3. Swipe your enrolled finger.  
4. Click Fingerprint control.  
5. Click Delete All button in the lower right.  
6. “Are you sure you want to delete all fingerprints?”  
will be displayed on screen, click OK button.  
Windows logon via fingerprint authentication  
In place of the usual Windows logon by ID and password, fingerprint  
authentication also allows logon to Windows.  
This is useful especially when many users are using the PCs, as user selection  
can be skipped.  
Fingerprint authentication procedure  
1. Start up the computer.  
2. The Logon Authorization screen is displayed. Choose any of the enrolled  
fingers and swipe the fingerprint on the sensor. If authentication is successful,  
the user will be logged on to Windows.  
n
n
If the fingerprint authentication fails, please logon using the Windows  
logon password.  
Please logon using the Windows logon password if the fingerprint  
authentication failed for five times. To logon using the Windows logon  
password, enter the Windows logon password at the [Welcome] screen as  
normal.  
n
A warning message will be displayed when authentication is abnormal or  
authentication is not successful within a fixed duration.  
Fingerprint system boot authentication  
General  
The fingerprint authentication system can be used to replace the keyboard based  
User Password authentication system when booting up  
If you do not want to use the fingerprint authentication system for password  
authentication when booting up, but prefer to use the keyboard-based system  
instead, press the ESC key or click Switch User button when the Fingerprint  
System Authentication screen is displayed. This will switch the password input  
screen to the keyboard-based one.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-7  
Operating Basics  
n
n
It is necessary to register the User Password before using the fingerprint  
Pre-OS feature and its extended function, the fingerprint Single Sign-On  
feature. Please use TOSHIBA HW Setup to register the User Password.  
If you fail fingerprint authentication more than five times, you must  
enter the User Password or Supervisor Password manually to start the  
computer.  
n
n
When swiping, please do it slowly and at a constant speed. If this does  
not improve the authentication rate, please adjust the speed.  
If there are any changes in the environment or settings related to  
authorization, you will be required to provide authorization information  
such as a User Password and HDD password.  
Fingerprint Single Sign-On feature  
General  
This is a feature that allows the user to complete the authentication for both the  
User Password (and optionally, the HDD user and Supervisor passwords) and  
logging on to Windows using only one fingerprint authentication when booting  
up. It is necessary to register the User Password and Windows Logon password  
before using the fingerprint Pre- OS feature and this fingerprint Single Sign-On  
feature. Please use TOSHIBA HW Setup to register your User Password.  
Only one fingerprint authentication is required to replace the User Password  
(and, if selected, the HDD user and Supervisor passwords) and Windows Logon  
password.  
How to enable fingerprint system boot  
authentication settings and Single Sign-on feature  
It is necessary to first enroll your fingerprint with the TOSHIBA Fingerprint Utility  
and Single Sign-on feature prior to enabling and configuring the fingerprint Pre-  
OS feature.  
Check that your fingerprint is enrolled before configuring the settings.  
1. Logon as Administrator means a user has administrator privileges.  
2. Click Start, point to All Programs, point to TOSHIBA, point to Utilities, point  
to TOSHIBA Fingerprint Utility and click it.  
3. Swipe your finger across the fingerprint sensor.  
4. Click Run As Administrator. If UAC setting for windows is off, this button  
won’t appear.  
4-8  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
5. User Account Control window is displayed when you click a Run as  
administrator. Select Allow on User Account Control window.  
6. Swipe your finger across the fingerprint sensor.  
7. Click Setting.  
8. Place a check mark in Boot authentication if you want to use the Single  
Sign-on feature, also check on Single Sign-on.  
9. Click Apply”.  
10. “Save succeeded” is displayed. Click “OK”.  
11. Click Close.  
12. “Are you sure to close this window?” is displayed. Click “OK”.  
13. Click Close.  
14. “Are you sure to close this window?” is displayed. Click “OK”.  
The modified configuration for fingerprint Pre-OS feature becomes effective the next  
time the system is booted up.  
Fingerprint utility limitations  
TOSHIBA does not guarantee that the fingerprint utility technology will be  
completely secure or error-free. TOSHIBA does not guarantee that the fingerprint  
utility will accurately screen out unauthorized users at all times. TOSHIBA is not  
liable for any failure or damage that might arise out of the use of the fingerprint  
software or utility.  
n
The fingerprint sensor compares and analyzes the unique characteristics  
in a fingerprint. However, there may be instances where certain users  
are unable to register their fingerprints due to insufficient unique  
characteristics in their fingerprints.  
n
The recognition success rate may differ from user to user.  
USB Sleep and Charge function  
Your computer can supply USB bus power (DC5V) to the USB port even when  
the power of the computer is turned OFF. Power OFF” includes Sleep Mode,  
Hibernation Mode or shutdown state.  
This function can only be used for ports that support the USB Sleep and Charge  
function (hereinafter called “compatible ports”).  
Compatible ports are USB ports that have the ( ) symbol icon.  
You can use the “USB Sleep and Charge function” to charge certain USB-  
compatible external devices such as mobile phones or portable digital music  
players.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-9  
 
Operating Basics  
However, the “USB Sleep and Charge function” may not work with certain external  
devices even if they are compliant with the USB specification. In those cases, turn  
the power of the computer ON to charge the device.  
n
n
The “USB Sleep and Charge function” only works for compatible ports.  
This function is disabled in the default setting. To enable it, you must  
change [Disabled] to [Enabled] in the BIOS Setup.  
When “USB Sleep and Charge function” is set to [Enabled] in BIOS Setup,  
USB bus power (DC5V) will be supplied to compatible ports even when  
the power of the computer is turned OFF.  
USB bus power (DC5V) is similarly supplied to the external devices which  
are connected to the compatible ports. However, some external devices  
cannot be charged solely by supplying USB bus power (DC5V).  
As for the specifications of the external devices, please contact the  
device manufacturer or check the specifications of the external devices  
thoroughly before use.  
n
n
Using the USB sleep and charge function to charge external devices will  
take longer than charging the devices with their own chargers.  
If external devices are connected to compatible ports when the AC  
adaptor is not connected to the computer, the battery of the computer will  
be depleted even when the power of the computer is turned OFF.  
As such, we recommend that you connect the AC adaptor to the computer  
when using the USB sleep and charge function.  
n
n
External devices connected to the USB bus power (DC5V) function that  
interfaces with the power ON/OFF of the computer may always be in an  
operational state.  
When there is a current overflow of the external devices connected to  
the compatible ports, USB bus power (DC5V) supply may be stopped for  
safety reasons.  
n
Metal paper clips or hair pins/clips will generate heat if they come into  
contact with USB ports. Do not allow USB ports to come into contact with  
metal products, for example when carrying the computer in your bag.  
Starting the USB Sleep and Charge Utility  
To start the utility, click Start  
All Programs  
TOSHIBA  
Utilities USB  
Sleep and Charge.  
4-10  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
Enabling USB Sleep and Charge  
This utility can be used to enable and disable the USB Sleep and Charge function.  
Check the “USB Sleep and Charge” checkbox. In the default state, this function is  
disabled.Power supply mode settings  
There are several USB Sleep and Charge function modes. “Mode 4 (Default)”  
should normally be used. Set one of the other modes (try from “Mode 3” to “Mode  
1”)*1 if the charge function cannot be used in “Mode 4 (Default)”. This function  
may not be able to be used with some connected external devices even if the  
appropriate mode is selected. In this situation, uncheck the “USB Sleep and  
Charge” checkbox and stop using this function.  
*1 Some mode may not be displayed in the list.  
Battery Settings  
This utility can be used to specify the lower limit of remaining battery life for USB  
Sleep and Charge. Move the slider bar to specify the lower limit. If the remaining  
battery life falls before the setting, the “USB Sleep and Charge” function will be  
stopped. Unchecking the “Enable under Battery Mode” checkbox sets the utility to  
only charge when the AC adaptor is connected.  
Using the Function buttons  
This section describes the Function buttons.  
Seven buttons are provided with some models.  
Icon  
Function button  
DVD  
*CD/None  
ECO  
CD/DVD  
Launch TOSHIBA  
DVD PLAYER  
Launch Windows  
Media Player  
Play/Pause  
Previous  
Next  
Play/Pause  
Previous chapter  
Next chapter  
Mute  
Play/Pause  
Previous track  
Next track  
Mute  
Mute  
Volume UP and  
DOWN  
Volume UP/DOWN Volume UP/Down  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-11  
 
Operating Basics  
Using the Web Camera  
This section describes the bundled webcam utility, which can capture still and  
video images. The web camera will auto-run when Windows starts.  
Please unstick the protective plastic-film before using the Web Camera.  
2
1
3
1.  
Web Camera LED*  
2.  
Web Camera*  
3.  
Built-in Microphone*  
* Provided with some models  
4-12  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
Using TOSHIBA Web Camera Application  
TOSHIBA Web Camera Application is pre-configured to start when you turn  
on Windows Vista; if you need to restart it go to Start  
TOSHIBA Utilities Web Camera Application.  
All Programs  
1
2
5
6
3
4
1.  
4.  
Capture Still Image  
Video Recording  
2.  
5.  
Open/Close Preview Area  
Camera Resolution  
3.  
6.  
Delete Recorded File  
Capture Settings  
Capture Still Image  
1
Click to capture a still image, and see a preview of the captured image in  
preview area.  
Open/Close Preview Area  
Click to open Preview Area. One more to close Preview Area.  
2
3
Delete Recorded File  
Choose a thumbnail of recorded file and click this button to delete this file  
from hard disk.  
Video Recording  
4
Click to start recording. One moree to stop recording and see preview of the  
video in Preview Area.  
Camera Resolution  
Choose resolution for Preview, Capture, and Record.  
5
6
Capture Settings  
Open Capture Settings dialog box.  
Chooses from the Basic tab to select photo and video saving location,  
select Capture Format and Video Quality.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-13  
Operating Basics  
Using the microphone  
Your computer has a built-in microphone that can be used to record monaural  
sounds into your applications. It can also be used to issue voice commands to  
applications that support such functions.(Built-in microphone is provided with  
some models)  
Since your computer has a built-in microphone and speaker, “feedback” may be  
heard under certain conditions. Feedback occurs when sound from the speaker is  
picked up in the microphone and amplified back to the speaker, which amplifies it  
again to the microphone.  
This feedback occurs repeatedly and causes a very loud, high-pitched noise. It is  
a common phenomenon that occurs in any sound system when the microphone  
input is output to the speaker (throughput) and the speaker volume is too loud or  
too close to the microphone. You can control throughput by adjusting the volume  
of your speaker or through the Mute function in the Master Volume panel. Refer to  
your Windows documentation for details on using the Master Volume panel.  
Using the TOSHIBA Face Recognition  
TOSHIBA Face Recognition uses a face verification library to verify the face data  
of users when they log in to Windows. The user can thus avoid having to enter a  
password or the like, which makes the login process easier. This software is pre-  
installed with some models.  
Note on Use  
n
TOSHIBA Face Recognition does not guarantee the correct identification of  
a user. Changes to the likeness of a registrant, such as hair style changes,  
wearing a cap, or wearing glasses may affect the recognition rates when such  
changes occur after the registrant had registered.  
n
n
TOSHIBA Face Recognition may incorrectly recognize faces that are similar to  
a registrant.  
For high security purposes, TOSHIBA Face Recognition is not a suitable  
substitute for Windows passwords. When security is a high priority, use your  
established Windows passwords to log in.  
n
Bright background light and/or shadows may prevent a registrant from being  
recognized correctly. In that case, log in using your Windows password.  
If recognition of a registrant fails repeatedly, refer to your computer  
documentation to learn ways to improve recognition performance.  
Disclaimer  
TOSHIBA does not guarantee that the face recognition utility technology willbe  
completely secure or error-free. TOSHIBA does not guarantee that the face  
recognition utility will accurately screen out unauthorized users at all times.  
Toshiba is not liable for any failure or damage that might arise out of the use of the  
face recognition software or utility.  
4-14  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO  
RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS,  
PROGRAMS, DATA, NETWORK SYSTEMS OR REMOVABLE STORAGE MEDIA  
ARISING OUT OF OR RESULTING FROM THE USE OF THE PRODUCT, EVEN  
IF ADVISED OF THE POSSIBILITY THEREOF.  
How to register the Face Recognition Data  
Take a picture for facial verification purposes, and register the data needed  
when you log in. To register the data needed when you log in, follow the steps as  
described below:  
1. To launch this utility, click Start  
All Programs  
TOSHIBA  
Utilities  
TOSHIBA Face Recognition.  
n
n
The Registration screen is displayed for a logged-in user whose face has  
not been registered.  
The Management screen is displayed for a logged-in user whose face  
has already been registered.  
2. Click the Register face button in the Management screen. The Registration  
screen is displayed.  
n
n
If you wish to practice, click on the Next button in the Registration screen.  
If you do not wish to practice, click on the Next button in the Registration  
screen.  
3. Click the Next button to start the guide.  
4. First, take a picture while moving your neck slightly to the left and right.  
5. Now take a picture while moving your neck down and up.  
n
Click the Back button to practice the guide once more.  
6. Click the Next button to start image-capturing process. Adjust the position of  
your face so that it fits within the face-shaped frame.  
7. Once your face has been positioned properly, the recording will commence.  
Start moving your neck very slightly to the left and right, and then move your  
neck down and up.  
8. Registration will end after you have repeatedly moved your neck left, right,  
down and up. When the register succeeds, below message will be displayed  
on the screen:  
Registration successful. Now we’ll do the verification  
test. Click the Next button.  
Click the Next button to perform the verification test.  
9. Perform the verification test. Face the screen as you do when you register.  
n
If verification fails, click the Back button and re-register. Please refer from  
step 6 to step 8.  
10. If verification is successful, click the Next button and register an account.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-15  
Operating Basics  
11. Register the account. Fill in the account registration fields.  
Fill in all fields.  
n
When you have finished it, click the Next button.  
12. The Management screen is displayed. The registered account name will  
be displayed. Clicking on it will cause the captured image of your face to be  
displayed on the left.  
How to Delete the Face Recognition Data  
Delete image data, account information, and personal record data created during  
registration. To delete the Face Recognition Data, follow the steps as described  
below:  
1. To launch this utility, click Start  
All Programs  
TOSHIBA  
Utilities  
TOSHIBA Face Recognition. The Management screen is displayed.  
2. Select a user which is deleted in the Management screen.  
3. Click the Delete button. “You are about to delete the user data.  
Would you like to continue?” will be displayed on the screen.  
n
If you do not want the data to be deleted, click the No button and you will  
then be returned to the Management screen.  
n
Clicking on the Yes button will remove the selected user from the  
Management screen.  
How to launch the help file  
For further information on this utility, please refer to help file.  
1. To launch the help file, click Start  
All Programs  
TOSHIBA  
Utilities  
TOSHIBA Face Recognition Help.  
Windows Logon via TOSHIBA Face Recognition  
This section explains how to login to Windows with TOSHIBA Face Recognition.  
Two authentication modes are provided.  
n
n
AUTO Mode Login screen: If the face authentication tile is selected by  
default, you can log in without using the keyboard or mouse.  
1:1 Mode Login screen: This mode is essentially the same as AUTO mode,  
but the Select Account screen will appear before the Display Captured Image  
screen, and you will need to select the user account to be authenticated in  
order to start the authentication process.  
AUTO Mode Login screen  
1. Turn on the computer.  
2. The Select Tiles screen will be displayed.  
3. Select Start face recognition.  
4. “Please face to the camera” will be displayed.  
4-16  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
5. Verification will be performed. If the authentication is successful, the image  
data taken in step 4 will be faded in and placed over one another.  
n
If an error occurs during authentication, you will be returned to the Select  
Tiles screen.  
6. Windows Welcome screen will be displayed, and will be logged in  
automatically to Windows.  
1.1 Mode Login screen  
1. Turn on the computer.  
2. The Select Tiles screen will be displayed.  
3. Select Start face recognition.  
4. The Select Account screen will be displayed.  
5. Select the account, and click the arrow button.  
6. “Please face to the camera” will be displayed.  
7. Verification will be performed. If the authentication is successful, the image  
data taken in step 6 will be faded in and placed over one another.  
n
If an error occurs during authentication, you will be returned to the Select  
Tiles screen.  
8. Windows Welcome screen will be displayed, and will be logged in  
automatically to Windows.  
n
If authentication was successful, but an authentication error subsequently  
occurred during the login to Windows, you will be asked to provide your  
account information.  
Using the optical disc drive  
The text and illustrations in this section refer primarily to the optical disk drive.  
However, operation is the same for all other optical media drives. The full-size  
drive provides high-performance execution of CD/DVD/HD DVDbased programs.  
You can run either 12 cm (4.72”) or 8 cm (3.15”) CDs/DVDs at tray ODD and  
12 cm (4.72”) CDs/DVDs at slot ODD without an adaptor. An ATAPI interface  
controller is used for CD/DVD/HD DVD operation. When the computer is  
accessing a CD/DVD/HD DVD, an indicator on the drive glows (Only tray ODD).  
section for precautions on writing to CD/DVD.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-17  
 
Operating Basics  
Loading discs  
To load a disc, follow the steps below and refer to the figures.  
1. a. When the power is on, press the eject button to open the drawer slightly.  
Eject button  
Pressing the eject button  
b. Pressing the eject button will not open the drawer when the disc drive’s  
power is off. If the power is off, you can open the drawer by inserting a  
slender object (about 15 mm) such as a straightened paper clip into the  
eject hole just to the right of the eject button.  
Manual release with the eject hole  
4-18  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
2. Grasp the drawer gently and pull until it is fully opened.  
Pulling the drawer open  
3. Place the disc, label side up, in the drawer.  
Inserting a disc  
When the drawer is fully opened, the edge of the computer will extend slightly  
over the disc tray. Therefore, you will need to turn the disc at an angle when  
you place it in the tray. After seating the disc, however, make sure it lies flat, as  
shown in the figure above.  
n
n
Do not touch the laser lens. Doing so could cause misalignment.  
Keep foreign matter from entering the drive. Check the back edge of the  
tray to make sure it carries no debris before closing the drive.  
User’s Manual  
4-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
4. Press gently at the centre of the disc until you feel it click into place. The disc  
should lie below the top of the spindle, flush with the spindle base.  
5. Push the center of the drawer to close it. Press gently until it locks into place.  
If the disc is not seated properly when the drawer is closed, the disc might  
be damaged. Also, the drawer might not open fully when you press the eject  
button.  
Closing the disc drawer  
4-20  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
Slot-loading optical disc drive  
For computer with slot-loading optical drive, to load CD/DVD, please follow the  
steps below and refer to figures.  
1. Turn your computer on.  
2. Gently hold the CD/DVD by the edges with label side facing up, and insert it  
into the optical disc drive slot straight on slowly.  
n
n
Use only round standard (12 cm) discs with this slot-loading optical drive.  
Any other size or shape disc may not be able to be removed from the slot  
and may damage the system as well as the disc.  
Gently push the CD/DVD until it is loaded automatically. Do not push  
it forcibly or at an angle to the optical disc drive slot. This may cause  
damage or adhesion of foreign matter on the surface of the CD/DVD.  
These imperfections may prevent the drive from reading from or writing to  
it.  
Inserting a disc  
Removing discs  
To remove the disc, follow the steps below and refer to the figure.  
Do not press the eject button while the computer is accessing the disc drive.  
Wait for the optical media drive indicator to go out before you open the drawer.  
Also, if the disc is spinning when you open the drawer, wait for it to stop before  
you remove it.  
1. To pop the drawer partially open, press the eject button. Gently pull the drawer  
out until it is fully opened.  
n
n
When the drawer pops open slightly, wait a moment to make sure the disc  
has stopped spinning before pulling the drawer fully open.  
Turn off the power before you use the eject hole. If the disc is spinning  
when you open the drawer, the disc could fly off the spindle and cause  
injury.  
User’s Manual  
4-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
2. The disc extends slightly over the sides of the drawer so you can hold it. Hold  
the disc gently by its edges and lift it out.  
Removing a disc  
3. Push the centre of the drawer to close it. Press gently until it locks into place.  
Slot-loading optical disc drive  
For computer with slot-loading optical drive, please follow the steps below and  
refer to figures.  
1. Make sure that your computer is on.  
2. Press the Eject button. The CD/DVD will be ejected about halfway.  
Do not place your hand or another object near the optical disc drive slot.  
Eject button  
Pressing the eject button  
4-22  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
3. Gently hold the CD/DVD by the edges and pull it horizontally.  
n
Use only round standard (12 cm) discs with this slot-loading optical drive.  
Any other size or shape disc may not be able to be removed from the slot  
and may damage the system as well as the disc.  
Writing CD/DVDs on DVD Super Multi Double Layer  
drives  
DVD Super Multi Double Layer drive  
You can use the DVD Super Multi Double Layer drive to write data to either  
CD-R,CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double  
Layer), DVD+RW or DVD-RAM discs. The TOSHIBA Disc Creator is provided as  
writing software with this computer.  
n
n
n
n
Please refer to the Writable discs, Chapter 2 for details about the types of  
writable CD and DVD discs that can be supported by this computer.  
Do not turn off the power to the optical disc drive while the computer is  
accessing it as this may cause you to lose data.  
To write data to CD-R/-RW media, use the TOSHIBA Disc Creator  
feature that is installed on your computer.  
When the power of the optical disc drive is off, the disc tray will not open  
even if the eject button is pushed. Use the ODD to turn the power of the  
optical disc drive on. Please refer to Chapter 5, The Keyboard.  
User’s Manual  
4-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
n
n
Use only round standard (12 cm) discs with this slot-loading optical drive.  
Any other size or shape disc may not be able to be removed from the slot  
and may damage the system as well as the disc.  
When writing information to media using an optical drive, you should  
always ensure that you connect the AC adaptor to a live power socket.  
It is possible that, if data is written while powered by the battery pack,  
the write process may sometimes fail due to low battery power - in these  
instances data loss may occur.  
Important message  
Before you write or rewrite to any of the media supported by the DVD Super  
Multi Double Layer drive, please read and follow all of the setup and operating  
instructions in this section. If you fail to do so, you may find that the DVD Super  
Multi Double Layer drive may not function properly, and you may fail to write or  
rewrite information successfully - this may cause you to either lose data or incur  
other damage to the drive or media.  
Disclaimer  
TOSHIBA does not bear responsibility for the following:  
n
n
Damage to any CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW,  
DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM disc that may be  
caused by writing or rewriting with this product.  
Any change or loss of the recorded contents of CD-R, CD-RW, DVD-R,  
DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or  
DVD-RAM media that may be caused by writing or rewriting with this product,  
or for any business profit loss or business interruption that may be caused by  
the change or loss of the recorded contents.  
n
Damage that may be caused by using third party equipment or software.  
Given the technological limitations of current optical disc writing drives, you may  
experience unexpected writing or rewriting errors due to disc quality or problems  
with hardware devices. In view of this, it is good practice to make two or more  
copies of important data, in case of any undesired change or loss of the recorded  
contents.  
4-24  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
Before writing or rewriting  
n
Based on TOSHIBA’s limited compatibility testing, we suggest the following  
manufacturers of CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW,  
DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM media, however,  
it must be noted that disc quality can affect write or rewrite success rates.  
Please also be aware that in no event does TOSHIBA guarantee the  
operation, quality or performance of any disc.  
CD-R:  
TAIYO YUDEN CO., Ltd.  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
CD-RW: (High-Speed, Multi-Speed)  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
CD-RW: (Ultra-Speed)  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
DVD-R:  
DVD Specifications for DVD-R Disc for General Version 2.0  
HITACHI MAXELL, LTD.  
PANASONIC COMMUNICATIONS CO., LTD.  
TAIYO YUDEN Co., LTD.  
DVD+R:  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
DVD-RW:  
DVD Specifications for DVD-RW Disc for General Version 1.2  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
VICTOR COMPANY OF JAPAN, LTD.  
DVD+RW:  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
DVD-RAM:  
DVD Specifications for DVD-RAM Disc for Version 2.0, 2.1, or 2.2  
PANASONIC COMMUNICATIONS CO., LTD.  
HITACHI MAXELL., LTD.  
DVD+R DL:  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
DVD-R DL:  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
DVD-R for Labelflash™:  
FUJIFILM CORPORATION.  
DVD+R for Labelflash™:  
FUJIFILM CORPORATION.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-25  
Operating Basics  
n
DVD Super Multi Double Layer drive cannot use discs that allow writing  
faster than 16x speed (DVD-R and DVD+R media), 8x speed (DVD-R  
(Dual Layer), DVD+RW and DVD+R (Double Layer) media), 6x speed  
(DVD-RW media), 5x speed (DVD-RAM media).  
n
Some types and formats of DVD-R (Dual Layer) and DVD+R (Double  
Layer) discs may be unreadable.  
n
n
2.6 GB and 5.2 GB DVD-RAM media cannot be read from or written to.  
DISC created in DVD-R (Dual Layer) format4 (Layer Jump Recording)  
cannot be read.  
n
n
n
If the disc is poor in quality, or is dirty or damaged, writing or rewriting errors  
may be noted - ensure that you check all discs for dirt or damage before you  
use them.  
The actual number of rewrites to CD-RW, DVD-RW, DVD+RW or DVD-RAM  
media will be affected by the quality of the disc itself and the way in which it is  
used.  
There are two types of DVD-R media available, authoring discs and general  
use discs. Do not attempt to use authoring discs as only general use discs can  
be written to by a computer drive.  
n
n
You can use both DVD-RAM discs that can be removed from a cartridge and  
DVD-RAM discs designed without a cartridge.  
You may find that other computer DVD-ROM drives or other DVD players may  
not be able to read DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R  
(Double Layer) or DVD+RW discs.  
n
n
Data written to a CD-R, DVD-R, DVD-R (Dual Layer), DVD+R or DVD+R  
(Double Layer) discs cannot be deleted either in whole or in part.  
Data deleted/erased from a CD-RW, DVD-RW, DVD+RW or DVD-RAM disc  
cannot be recovered. You must check the content of the disc carefully before  
you delete it, taking care that, if multiple drives that can write data to discs are  
connected, you do not delete data from the wrong one.  
n
n
In writing to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double  
Layer), DVD+RW or DVD-RAM media, some space is required for file  
management, so you may not be able to write to the full capacity of the disc.  
Since the disc is based on the DVD standard, it might be filled with  
dummy data if the written data is less than about 1 GB. Therefore, in these  
circumstance, even if you write only a small amount of data, it might take  
additional time to fill in the dummy data.  
n
When multiple drives that can write data to discs are connected, be sure that  
you do not write to or delete data from the wrong drive.  
4-26  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
n
n
Be sure to connect the AC adaptor to the computer before you write or rewrite  
any information.  
Before you enter either Sleep Mode or Hibernation Mode, take care to ensure  
that any DVD-RAM writing has been completed. In this instance, writing is  
finished if you can eject the DVD-RAM media.  
n
n
n
n
Be sure to close all other software programs except for the writing software  
itself.  
Do not run software such as a screen saver which can put a heavy load on the  
processor.  
Operate the computer at its full power settings - do not use any powersaving  
features.  
Do not write information while virus checking software is running, instead wait  
for it to finish, then disable the virus protection applications, including any  
software that checks files automatically in the background.  
n
Do not use any hard disk utilities, including those that are intended to enhance  
hard disk drive access speeds, as they may cause unstable operation and  
damage data.  
n
n
CD-RW (Ultra Speed +) media should not be used as data may be lost or  
damaged.  
You should always write from the computer’s hard disk drive onto the CD/DVD  
- do not try to write from shared devices such as a server or any other network  
device.  
n
Writing with software other than TOSHIBA Disc Creator has not been  
confirmed, therefore operation with other software applications cannot be  
guaranteed.  
When writing or rewriting  
Please observe the following points while you write or rewrite data to CD-R, CD-  
RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer),  
DVD+RW or DVD-RAM media:  
n
Always copy data from the hard disk drive to the optical media - do not use the  
cut-and-paste function as the original data will be lost if there is a write error.  
n
n
n
Do not perform any of the following actions:  
Change users in the Windows Vista operating system.  
Operate the computer for any other function, including such tasks as using a  
mouse or Touch Pad, or closing/opening the display panel.  
n
n
Start a communication application such as a modem.  
Apply impact or vibration to the computer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-27  
Operating Basics  
n
Install, remove or connect external devices, including such items as an  
ExpressCard, SD/SDHC memory card, USB device, external monitor, i.LINK  
device, or an optical digital device.  
n
n
n
Use the audio/video control button to reproduce music or voice.  
Open the optical disc drive.  
Do not use shut down, log off, Sleep Mode or Hibernation Mode functions  
while writing or rewriting.  
n
Make sure that the write/rewrite operation is completed before going into  
either Sleep Mode or Hibernation Mode (writing is completed if you can  
remove an optical media on the optical disc drive).  
n
n
If the media is of poor quality, or is dirty or damaged, writing or rewriting errors  
may occur.  
Set the computer on a level surface and avoid places subject to vibration  
such as airplanes, trains or cars. In addition, do not use the computer on an  
unstable surface such as a stand.  
n
Keep mobile phones and other wireless communication devices away from  
the computer.  
TOSHIBA Disc Creator  
Please be aware of the following limitations when you use the TOSHIBA Disc  
Creator:  
n
n
n
DVD Video cannot be created using TOSHIBA Disc Creator.  
DVD Audio cannot be created using TOSHIBA Disc Creator.  
You cannot use TOSHIBA Disc Creator’s ‘Audio CD for Car or Home CD  
Player’ function to record music to DVD-R, DVD-R (Dual Layer), DVD-RW,  
DVD+R, DVD+R (Double Layer) or DVD+RW media.  
n
n
n
Do not use the “Disc Backup” function of TOSHIBA Disc Creator in order to  
copy DVD Video or DVD-ROM material that has copyright protection.  
DVD-RAM discs cannot be backed up using the “Disc Backup” function of  
TOSHIBA Disc Creator.  
You cannot back up CD-ROM, CD-R or CD-RW media to DVD-R, DVD-R  
(Dual Layer) or DVD-RW media using the “Disc Backup” function of TOSHIBA  
Disc Creator.  
n
n
You cannot back up CD-ROM, CD-R or CD-RW media to DVD+R, DVD+R  
(Double Layer) or DVD+RW media using the “Disc Backup” function of  
TOSHIBA Disc Creator.  
You cannot back up DVD-ROM, DVD Video, DVD-R, DVD-R (Dual Layer),  
DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW to CD-R or CD-RW  
media using the ‘Disc Backup’ function of TOSHIBA Disc Creator.  
4-28  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
n
n
TOSHIBA Disc Creator cannot record in packet format.  
You might not be able to use the “Disc Backup” function of TOSHIBA Disc  
Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R  
(Double Layer) or DVD+RW disc that was made with other software on a  
different optical media recorder.  
n
If you add data to a DVD-R, DVD-R (Dual Layer), DVD+R or DVD+R (Double  
Layer) disc that you have already recorded to, you might not be able to read  
the added data under some circumstances. For example, it cannot be read  
under 16-bit operating systems, such as Windows 98SE and Windows Me,  
while in Windows NT4 you will need Service Pack 6 or later, and in Windows  
2000, you will need Service Pack 2. In addition to this, some DVD-ROM and  
DVD-ROM/CD-R/RW drives cannot read this added data regardless of the  
operating system.  
n
n
TOSHIBA Disc Creator does not support recording to DVD-RAM discs - to  
achieve this you should use Windows Explorer or another similar utility.  
When you back up a DVD disc, be sure that the source drive supports  
recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double  
Layer) or DVD+RW media - if this is not the case then the source disc might  
not be backed up correctly.  
n
n
When you back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R  
(Double Layer) or DVD+RW disc, be sure to use the same type of disc.  
You cannot partially delete any data written to a CD-RW, DVD-RW or  
DVD+RW disc.  
Data Verification  
To verify that data has been written or rewritten correctly to a data CD/DVD you  
should follow the steps below before you begin the write/rewrite process:  
1. Display the setting dialog box by one of the following two steps:  
n
Click the Recording settings button (  
in the Data Disc mode.  
) for writing on the main toolbar  
n
Select Settings for Each Mode  
Data CD/DVD in the Settings menu.  
2. Mark the Verify Written Data check box.  
3. Select File Open or Full Compare mode.  
4. Click the OK button.  
How to learn more about TOSHIBA Disc Creator  
Please refer to the Help files for additional TOSHIBA Disc Creator information.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-29  
Operating Basics  
Video  
You can record using Corel DVD MovieFactory for TOSHIBA.  
When Using Corel DVD MovieFactory for  
TOSHIBA  
How to make a Labelflash DVD  
Simplified steps for making a Labelflash DVD:  
1. Insert a Labelflash disc in DVD drive.  
Set PRINTING SIDE surface for underside.  
2. Click Start  
All Programs  
DVD MovieFactory for TOSHIBA  
DVD  
Movie Factory Launcher to launch DVD Movie Factory.  
3. Click Create Disc Label. Corel Label@Once is started.  
4. Click the General tab.  
5. Choose DVD Drive for Printer. e.g. <E:> PIONEER DVD…  
6. Add and customize the look of your images and text.  
7. Click Label Flash setting and choose Draw Quality.  
8. Click Print.  
How to make a DVD-Video  
Simplified steps for making a DVD-Video from video data captured from a DV-  
Camcorder:  
1. Click Start  
All Programs  
DVD MovieFactory for TOSHIBA  
DVD  
Movie Factory Launcher to launch DVD MovieFactory.  
2. Insert a DVD-RW or DVD+RW disc in Burner.  
3. Click Video Disc  
Burn Video to Disc to launch Direct Recording dialog  
box, choose DVD-Video/+VR to invoke Straight Capture to Disc Page.  
4. Choose DVD-Video format.  
5. Confirm the capture source is DV.  
6. Press Capture button.  
Simplified steps for making a DVD-Video from adding video source:  
1. Click Start  
All Programs  
DVD MovieFactory for TOSHIBA  
DVD  
Movie Factory Launcherto launch DVD MovieFactory.  
2. Click Video Disc  
New Project to invoke 2nd Launcher ,choose your  
project type, then invoke DVD MovieFactory.  
4-30  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
3. Add source from HD Disk by click Add video files button to invoke browser  
dialog box.  
4. Choose the source video then go to Next page to apply Menu.  
5. After choose the menu template, press Next button to go to Burning Page.  
6. Choose the output type then press Burn button.  
How to learn more about Corel DVD MovieFactory  
Please refer to the Help and Manual files for additional Corel DVD MovieFactory  
information.  
Important information for use  
Note the following limitations when you write Video DVD:  
1. Editing digital video  
n
n
Log in with Administrator rights to use DVD MovieFactory.  
Make sure that your computer is running on AC power when using DVD  
MovieFactory.  
n
n
Operate the computer at Full Power. Do not use power-saving features.  
While you are editing DVD, you can display preview. However, if another  
application is running the preview might not display properly.  
n
n
n
DVD MovieFactory cannot edit or play copy protected content.  
Do not enter sleep or hibernation mode while using DVD MovieFactory.  
Do not operate DVD MovieFactory immediately after turning on the  
computer. Please wait until all Disc Drive activity has stopped.  
n
n
When recording to a DV-Camcorder, to ensure you capture all of your  
data, let the camcorder record for a few seconds before you begin  
recording your actual data.  
CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD  
functions are not supported in this version.  
n
n
While recording video to DVD, please close all other programs.  
Do not run software like a screen saver because it can put a heavy load  
on the CPU.  
n
Do not support mp3 decode and encode.  
2. Before recording the video to DVD  
n
When you record DVD disc, please use only discs recommended by the  
Drive manufacturer.  
n
Do not set the working drive to a slow device like a USB1.1 hard disk  
drive or it will fail to write DVD.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-31  
Operating Basics  
n
Do not perform any of the following actions:  
n
Operate the computer for any other function, including using a mouse  
to TouchPad or closing/Opening the LCD panel.  
n
n
Bump or cause vibration to the computer.  
Use the Mode control button and Audio/Video control button to  
reproduce music or voice.  
n
n
Open the DVD drive.  
Install, remove or connect external devices, including the following:  
PC card, SD card, USB device, external display, i.LINK. devices,  
optical digital devices.  
n
n
n
Please verify your disc after recording important data.  
DVD-R/+R/+RW disc cannot be written in VR format.  
Not support to output VCD and SVCD format.  
3. About Straight to Disc  
n
n
n
n
Not support to record on DVD-R/+R disc  
Not support to record DVD+VR format by HDV  
HDV support to burn DVD-Video only  
DVD-VR format not support to add Menu  
4. About recorded DVDs  
n
n
n
Some DVD-ROM drives for personal computers or other DVD players  
may not be able to read DVD-R/+R/-RW/-RAM discs.  
When playing your recorded disc on your computer, please use WinDVD  
software application.  
If you use an over-used rewritable disc, the full formatting might be  
locked. Please use a brand new disc.  
TOSHIBA DVD PLAYER  
This software is provided for playback of DVD Video.  
It has an on-screen interface and functions. Click Start  
All Programs  
TOSHIBA DVD PLAYER TOSHIBA DVD PLAYER.  
For details on how to use TOSHIBA DVD PLAYER, see the help file.  
Please be aware of the following limitations when you use the TOSHIBA DVD  
PLAYER:  
4-32  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
Notes on use  
n
Frame dropping, audio skipping or out of synch audio and video may occur  
during playback of some DVD Video titles.  
n
Close all other applications when using the “TOSHIBA DVD PLAYER”. Do not  
open any other applications or do not carry out any other operations during  
DVD Video playback. Playback may stop or not function properly in some  
situations.  
n
n
n
Unfinalized DVDs created on home DVD recorders may not be playable on  
the computer.  
Use DVD-Video discs with a region code which is either “the same as the  
factory default setting” or “ALL”.  
Do not playback DVD discs Video while watching or recording television  
programs using other applications. Doing so may cause DVD Video playback  
or television program recording errors. In addition, if prescheduled recording  
starts during DVD Video playback it may cause DVD Video playback or  
television program recording errors. Please view DVD Video during times  
when there is no recording prescheduled.  
n
n
The resume function cannot be used with some discs on the “TOSHIBA DVD  
PLAYER”.  
It is recommended the AC adaptor be connected when playing DVD-Video.  
Power saving features may interfere with smooth playback. When playing  
DVD-Video using battery power, set the Power Options to “High performance”.  
n
Screen savers will not display while playing a movie in the “TOSHIBA DVD  
PLAYER”. The computer will also not go into Sleep Mode, Hibernation Mode  
or shutdown while using “TOSHIBA DVD PLAYER”.  
n
n
n
Do not configure the Display automatic power off function to run while the  
“TOSHIBA DVD PLAYER” is running.  
Do not switch to Hibernation or Sleep Mode when running the “TOSHIBA DVD  
PLAYER”.  
Do not lock the computer using the Windows logo ( ) + L keys or the Fn + F1  
keys when running the “TOSHIBA DVD PLAYER”.  
Media care  
This section provides tips on protecting data stored on your CD’s, DVD’s and  
floppy diskettes. Handle your media with care. Following the simple precautions  
listed below will increase the lifetime of your media and protect the data stored on  
it.  
CD/DVDs  
1. Store your CD’s and DVD’s in the containers they originally came in to protect  
them and keep them clean.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-33  
 
Operating Basics  
2. Do not bend the CD’s or DVD’s.  
3. Do not write on, apply a sticker to, or otherwise mar the surface of the CD or  
DVD that contains the data.  
4. Hold the CD or DVD by its outside edge or the edge on the center hole - any  
fingerprints on the surface of the disc can prevent the drive from properly  
reading data.  
5. Do not expose the CD or DVD to direct sunlight, extreme heat or cold.  
6. Do not place heavy objects on your CD’s or DVD’s.  
7. If your CD’s or DVD’s become dusty or dirty, wipe them with a clean dry  
cloth from the center hole outwards - do not wipe in a circular direction. If  
necessary, you can use a cloth that has been lightly dampened in water or a  
neutral cleaner but you must not use benzine, thinner or any similar cleaning  
solution.  
Floppy diskettes  
1. Store your floppy diskettes in the container they came in to protect them and  
keep them clean. If a floppy diskette becomes dirty, clean it with a soft, lightly  
dampened cloth - do not use cleaning fluid.  
2. Never open the shutter or touch the magnetic surface of your floppy diskette  
- doing this could permanently damage it and lose data.  
3. Always handle floppy diskettes with care to prevent the loss of stored data.  
4. Always apply the floppy diskette label in the correct location and never apply  
a new label on top of an existing one - in this instance the label could come  
loose and damage the floppy diskette drive.  
5. Never use a pencil for writing on a floppy diskette label as the dust from the  
pencil lead could cause a system malfunction if it found its way onto the  
computer’s components. In this instance, always use a felt-tipped pen and  
write the label first before applying it to the floppy diskette.  
6. Never put a floppy diskette in a location where water or other liquid may make  
contact with it, or where it is excessively damp - either of these conditions  
could cause data loss.  
7. Never use a wet or damp floppy diskette - this could damage the floppy  
diskette drive or other devices within the computer.  
8. Data may be lost if the floppy diskette is twisted, bent, or exposed to direct  
sunlight, extreme heat or cold.  
9. Do not place heavy objects on your floppy diskettes.  
10. Do not eat, smoke, or use items such as erasers near your floppy diskettes  
as foreign particles inside the jacket of the floppy diskette can damage the  
magnetic surface.  
11. Magnetic energy can destroy the data on your floppy diskettes. In view of this  
you should keep your floppy diskettes away from speakers, radios, televisions  
and other sources of magnetic fields.  
4-34  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
Sound system  
This section describes some of the audio control functions.  
Adjusting System Volume  
You can control the overall level of sound using Windows Volume Mixer.  
To launch Volume Mixer, follow the steps below.  
1. Locate the Speaker icon on the task tray.  
2. Right-click the Speaker icon on the task tray.  
3. Select Open Volume Mixer from the menu.  
Click the Device button to display available playback devices. Select Speakers to  
use the internal speakers for listening. Adjust speaker volume by moving the slider  
up or down to raise or lower the volume. Click the Mute button to mute the sound.  
You may see another control under Applications in Volume Mixer. It is the  
control for an application which is currently running. The Windows Sounds is  
always displayed since it controls the system sounds’ volume.Changing System  
Sounds  
System sounds are assigned to inform you when certain events happen. This  
section explains how select an existing scheme or save one you have modified.  
To launch the configuration dialog window for system sounds, follow the steps  
below:  
1. Right-click the Speaker icon on the task tray.  
2. Select Sounds from the memu.  
Realtek HD Audio Manager  
You can confirm and change the audio configuration using the Realtek Audio  
Manager. To launch the Realtek Audio Manager, Click Start  
Control Panel  
Hardware and Sound Realtek HD Audio Manager. When you first  
launch the Realtek Audio Manager, you will see following device tabs. Speakers  
is the default output device. Microphone is the default input device. To change  
the default device, click the Set Default Device button under the chosen device  
tab.  
n
n
Speakers is the default output device. Select it when using the internal  
speakers or headphones.  
Digital Output should be selected when connecting the optical cable to the  
Headphone, S/PDIF and Line out jack for playing digital sound on digital audio  
equipment. Digital Output can only be used by connecting an optical audio  
cable.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-35  
 
Operating Basics  
n
Microphone is the default input device. It should be selected when using the  
computer’s internal microphone or an external microphone connected the  
Microphone to record sound.  
Information  
Click the Information button to view hardware information, software information,  
and language setting.  
Speaker Configuration  
Click the playback button to confirm the internal speakers or the headphone  
sound is coming from the right direction.  
Sound Effects  
This section explains how to select various sound effects.  
n
n
n
Environment - simulates reverberations of sound for familiar environments  
around us. You can select an existing preset in the menu.  
Equalizer- raises or lowers a frequency of sound to simulate a popular genre  
of music. You can select an existing preset in the menu.  
Karaoke - Cancels the specific frequency of sound and results in the Vocal  
Cancellation. Clicking the Karaoke icon, lowers the vocal sound within  
music. Using the arrow buttons will adjust the musical key of the sound.  
Microphone Effects  
Microphone Effects are only found within the Microphone window.  
n
n
Noise Suppression reduces background noise and fan noise.  
Accoustic Echo Cancellation reduces feedback and feedback echo.  
Default Format  
You can change the sample rate and bit depth of sound.  
Dolby Sound Room®  
Dolby Sound Room provides stunning personal surround sound from any pair  
of speakers or headphones. Ideal when using surround sound speakers is not  
practical. Dolby Sound Room enables an enveloping entertainment experience.  
Dolby Sound Room technologies  
n
n
n
Dolby Headphone - Personal surround sound using any set of headphones  
so that listeners feel like the action is happening all around them.  
Sound Space Expander - Widens the sound experience to “wrap” around the  
listener.  
Natural Bass - Extends the bass response of any speakers by up to an  
octave.  
4-36  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
To open the user interface of Dolby Sound Room, steps as detailed below:  
1. Click the right button of a mouse on the speaker icon on the Windows Taskbar,  
and select Playback Devices in the submenu.  
2. On the Playback tab, select Speakers, and click Properties.  
3. Click the Dolby tab.  
Modem  
This section describes how to connect and disconnect the internal modem to and  
from a telephone jack.  
The internal modem does not support voice functions. All data and fax  
functions are supported.  
n
n
In case of a lightning storm, unplug the modem cable from the telephone  
jack.  
Do not connect the modem to a digital telephone line. A digital line will  
damage the modem.  
Region selection  
Telecommunication regulations vary from one region to another, so you will need  
to make sure the internal modem’s settings are correct for the region in which it  
will be used.  
To select a region, follow the steps below.  
1. Click start, point to All Programs, TOSHIBA, Networking, and click Modem  
Region Select.  
Do not use the Country/Region Select function in the Modem setup utility  
in the Control Panel if the function is available. If you change the Country/  
Region in the Control Panel, the change may not take effect.  
2. The Region Selection icon will appear in the Task Bar. Click the icon with the  
primary mouse button to display a list of regions that the modem supports. A  
sub menu for telephony location information will also be displayed. A check  
will appear next to the currently selected region and telephony location.  
3. Select a region from the region menu or a telephony location from the  
submenu.  
n
When you click a region it becomes the modem’s region selection, and  
the New Location for telephony will be set automatically.  
n
When you select a telephony location, the corresponding region is  
automatically selected and it becomes the modem’s current region  
setting.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-37  
 
Operating Basics  
Properties menu  
Click the icon with the secondary mouse button to display properties menu on the  
screen.  
Settings  
You can enable or disable the following settings:  
AutoRun Mode  
The Region Select utility starts automatically when you start up the operating  
system.  
Open the Dialling Properties dialog box after  
selecting region.  
The dialing properties dialog box will be displayed automatically after you select  
the region.  
Location list for region selection.  
A submenu appears displaying location information for telephony.  
Open dialog box, if the modem and Telephony  
Current Location region code do not match.  
A warning dialog box is displayed if current settings for region code and telephony  
location are incorrect.  
Modem Selection  
If the computer cannot recognize the internal modem, a dialog box is displayed.  
Select the COM port for your modem to use.  
Dialing Properties  
Select this item to display the dialing properties.  
If you are using the computer in Japan, the Telecommunications Business Law  
requires that you select Japan region mode. It is illegal to use the modem in  
Japan with any other selection.  
4-38  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
Connecting  
To connect the modem cable, follow the steps below.  
n
The modular cable that comes with the computer must be used to connect  
a modem. Connect the end of the modular cable with the core to the  
computer.  
n
n
In case of a lightning storm, unplug the modem cable from the telephone  
jack.  
Do not connect the modem to a digital telephone line. A digital line will  
damage the modem.  
1. Plug one end of the modular cable into the modem jack.  
2. Plug the other end of the modular cable into a telephone jack.  
Connecting the internal modem  
Do not pull on the cable or move the computer while the cable is connected.  
Disconnecting  
To disconnect the internal modem cable, follow the steps below.  
1. Pinch the lever on the connector in the telephone jack and pull out the  
connector.  
2. In the same way, pull the cable’s other connector out of the computer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-39  
 
Operating Basics  
Wireless communications  
The computer’s wireless communication function supports both Wireless LAN and  
Bluetooth devices.  
Only some models are equipped with both Wireless LAN and Bluetooth functions.  
n
n
Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near  
a microwave oven or in areas subject to radio interference or magnetic  
fields. Interference from a microwave oven or other source can disrupt  
Wi-Fi or Bluetooth operation.  
Turn Wi-Fi and Bluetooth functionalities off when near a person who  
may have a cardiac pacemaker implant or other medical electric device.  
Radio waves may affect pacemaker or medical device operation, possibly  
resulting in serious injury. Follow the instruction of your medical device  
when using any Wi-Fi or Bluetooth functionality.  
n
n
Always turn off Wi-Fi or Bluetooth functionality if the computer is near  
automatic control equipment or appliances such as automatic doors or  
fire detectors. Radio waves can cause malfunction of such equipment,  
possibly resulting in serious injury.  
It may not be possible to make a network connection to a specified  
network name using the ad hoc network function. If this occurs, the new  
network(*) will have to be configured for all computers connected to the  
same network in order to re-enable network connections.  
* Please be sure to use new network name.  
Wireless LAN  
The Wireless LAN feature is not available on all models. Where present, it  
supports the A,B, G and draft N standards but it is compatible with other LAN  
systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency  
Division Multiplexing radio technology that complies with IEEE802.11 Wireless  
LAN standard.  
n
n
n
Automatic Transmit Rate Select mechanism in the transmit range of 54, 48,  
36, 24, 18, 12, 9 and 6 Mbit/s. (IEEE 802.11a/g)  
Automatic Transmit Rate Select mechanism in the transmit range of 11, 5.5, 2  
and 1 Mbit/s. (IEEE 802.11b)  
Roaming over multiple channels  
4-40  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
n
n
Card Power Management  
Wired Equivalent Privacy (WEP) data encryption, based on the 128 bit  
encryption algorithm.  
n
Advanced Encryption Standard (AES) data encryption, based on 128 bit  
encryption algorithm.  
Security  
n
Be sure to enable the encryption function otherwise you may expose your  
computer to illegal access by an outsider across the Wireless LAN which  
may cause intrusion, eavesdropping, and the loss or destruction of stored  
data. TOSHIBA strongly recommend the customer to enable the encryption  
function.  
n
TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless  
LAN and the damage thereof.  
Bluetooth Stack for Windows by TOSHIBA  
(depends on the model purchased)  
Please note that this software is specifically designed for the following operating  
systems:  
n
Microsoft® Windows Vista™  
Detailed information regarding the use with these operating systems is listed  
below. Please refer also to the electronic information which is included with  
each software.  
This Bluetooth Stack is based on Bluetooth Version 1.1/1.2/2.0/2.1+EDR  
specification. TOSHIBA cannot confirm compatibility between any PC products  
and/or other electronic devices that use Bluetooth other than TOSHIBA  
notebook computers.  
Release Notes related to the Bluetooth Stack for  
Windows by TOSHIBA  
1. Fax application software:  
Regarding FAX application software, there are some software that you cannot  
use on this Bluetooth Stack.  
2. Multi User:  
On Windows Vista™, the use of Bluetooth is not supported in a multiuser  
environment. This means that, when you use Bluetooth, other users logged  
onto the same computer will not be able to use its Bluetooth functionality.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-41  
 
Operating Basics  
Product Support  
The latest information regarding Operating System support, Language Support  
or available upgrades can be found on our web site http://www.toshiba-europe.  
com/computers/tnt/bluetooth.htm in Europe or www.pcsupport.toshiba.com in the  
United States.  
Wireless communication switch  
You can enable or disable the Wireless LAN function, with the on/off switch. No  
transmissions are sent or received when the switch is off. Slid the Switch to turn it  
on and turn it off.  
Set the switch to off in airplanes and hospitals. Check the indicator. It will stop  
glowing when the wireless communication function is off.  
Wireless activity LED  
The wireless activity LED indicates the status of the wireless communication  
functions.  
Indicator status  
Indication  
LED off  
Wireless communication switch is set to off.  
Automatic power down because of overheating.  
Power malfunction.  
LED glows  
Wireless communication switch is on. Wireless  
LAN is turned on by an application.  
If you used the Task Bar to disable Wireless LAN, you will need to restart the  
computer to re-enable it. Alternatively, you can also follow this procedure:  
1. In the Control Panel, click System and Maintenance.  
2. Click the Device Manager. The Device Manager window opens. Click Network  
adaptors.  
3. Select your preferred Network adaptor, then click the Enable button in the tool  
bar.  
LAN  
The computer has built-in support for Fast Ethernet LAN (10 megabits per second,  
10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and  
Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).  
This section describes how to connect disconnect to a LAN.  
Do not install or remove a memory module while Wake-up on LAN is enabled.  
4-42  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
n
n
The Wake-up on LAN function consumes power even when the system is  
off. Leave the AC adaptor connected while using this feature.  
The Link speed (10/100/1000 megabits per second) changes  
automatically depending on the network conditions (connected device,  
cable or nose and so on).  
LAN cable types  
The computer must be configured properly before connecting to a LAN.  
Logging onto a LAN using the computer’s default settings could cause a  
malfunction in LAN operation. Check with your LAN administrator regarding  
set-up procedures.  
If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-TX), be  
sure to connect with a CAT5 cable or higher. You cannot use a CAT3 cable.  
If you are using Giga bit Ethernet LAN, be sure to connect with a CAT5-E cable or  
higher. You cannot use a CAT5 or a CAT3 cable.  
If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you can  
connect with a CAT3 or higher cable.  
Connecting LAN cable  
To connect the LAN cable, follow the steps below.  
1. Turn off the power to the computer and to all external devices connected to  
the computer.  
2. Plug one end of the cable into the LAN jack. Press gently until you hear the  
latch click into place.  
Connecting the LAN cable  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-43  
 
Operating Basics  
3. Plug the other end of the cable into a LAN hub connector. Check with your  
LAN administrator before connecting to a hub.  
Disconnecting LAN cable  
To disconnect the LAN cable, follow the steps below.  
1. Pinch the lever on the connector in the computer’s LAN jack and pull out the  
connector.  
2. Disconnect the cable from the LAN hub in the same manner. Check with your  
LAN administrator before disconnecting from the hub.  
Cleaning the computer  
To help ensure long, trouble-free operation, keep the computer free of dust and  
use care with liquids around the computer.  
n
Be careful not to spill liquids into the computer. If the computer does get wet,  
turn the power off immediately and let the computer dry completely before you  
turn it on again.  
n
Clean the computer using a slightly damp (with water) cloth. You can use  
glass cleaner on the display. Spray a small amount of cleaner on a soft, clean  
cloth and wipe the screen gently with the cloth.  
Never spray cleaner directly onto the computer or let liquid run into any part of  
it. Never use harsh or caustic chemical products to clean the computer.  
n
Remove the dust from the cooling vents on the Left side of the computer  
regularly with a vacuum cleaner. Refer to Chapter 2, The Grand Tour, Left  
side.  
Moving the computer  
The computer is designed for rugged durability. However, a few simple  
precautions taken when moving the computer will help ensure trouble-free  
operation.  
n
Before moving the computer, it recommends changing the function of  
TOSHIBA HDD Protection. Refer to the section, Using the Hard Disk Drive  
(HDD) Protection, in this chapter.  
n
n
Make sure all disk activity has ended before moving the computer. Check the  
HDD indicator on the computer.  
If a CD/DVD is in the drive, remove it. Also make sure the disc tray is securely  
closed.  
4-44  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Basics  
n
n
n
n
Turn off (shut down) the computer.  
Disconnect the AC adaptor and all peripherals before moving the computer.  
Close the LCD display panel. Do not pick up the computer by its display panel  
Before carrying your computer, shut down the computer, disconnect the power  
cable and wait until the PC cools down. Failure to follow this instruction could  
result in minor injury.  
n
Always turn off the power when you move the computer. If the power button  
has a lock, set it to the lock position. Also be careful not to subject the  
computer to impact. Failure to follow this instruction could result in damage to  
computer, computer failure or loss of data.  
n
Never transport your computer with PC cards installed. This could cause  
damage to your computer and/or PC card, resulting in product failure.  
n
n
Use the carrying case when transporting the computer.  
When carrying your computer, be sure to hold it securely so that it does not  
fall or hit anything.  
n
Do not carry your computer by holding protruded portions.  
Using the Hard Disk Drive (HDD) Protection  
This computer has a function for reducing the risk of damage on the hard disk  
drive.  
Using an acceleration sensor built into the computer, TOSHIBA HDD Protection  
detects vibration shocks and similar signs of movement of the computer, and  
automatically moves the Hard Disk Drive head to a safe position to reduce the risk  
of damage that could be caused by head-to-disk contact.  
The TOSHIBA HDD Protection function does not guarantee that the hard disk  
drive will not be damaged.  
When vibration is detected, a message will be displayed on the screen, and the  
icon in the Taskbar notification area will changed to the protection state. This  
message is displayed until the OK button is pressed or 30 seconds pass. When  
vibration subsides, the icon returns to the normal state.  
Taskbar icon  
State  
Icon  
Description  
Normal  
TOSHIBA HDD Protection is enabled.  
Protection  
OFF  
TOSHIBA HDD Protection is active. The hard  
disk drive head is in a safe position  
TOSHIBA HDD Protection is disabled.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-45  
 
Operating Basics  
TOSHIBA HDD Protection Properties  
You can change the TOSHIBA HDD Protection settings by using the TOSHIBA  
HDD Protection window. To open the window, click Start All Programs  
TOSHIBA HDD Protection Settings. The window can also be started from  
the icon on the Taskbar or from the Control Panel.  
HDD Protection  
You can choose whether to enable or disable TOSHIBA HDD Protection.  
Detection Level  
This function can be set to four levels. The sensitivity levels in which vibrations,  
impacts and their similar signs are detected can be set to OFF, 1, 2 and 3 in  
ascending order. Level 3 is recommended for better protection of the computer.  
However, when the computer is used in a mobile environment or in other unstable  
conditions, setting the detection level to 3 could result in frequent execution of  
TOSHIBA HDD Protection, which will slow Hard Disk Drive reading and writing.  
Set a lower detection level when the speed of Hard Disk Drive reading and writing  
is a priority.  
Different detection levels can be set depending on whether the computer is used  
as handheld or mobile usages, or whether it is used in a stable environment such  
as on a table in the workplace or at home. By setting different detection levels for  
the computer depending on whether it runs with the AC power (desktop) or with  
batteries (handheld or mobile usage), the detection level automatically switches  
according to the power connection mode.  
3D Viewer  
This feature displays a 3D object on the screen which moves in according to  
tilting or vibration of the computer. When the TOSHIBA HDD Protection detects  
computer vibration the Hard Disk Drive head is parked and the 3D object disk  
rotation will stop. When the head is un-parked the disk will begin to rotate again.  
The 3D Viewer can be started from the icon in the task tray.  
n
n
n
This 3D object virtually represents the Computer’s internal Hard Disk Drive.  
This representation may vary from the actual number of disks, disk rotation,  
head movement, part size, shape and direction.  
This feature may use a large amount of CPU and memory on some models.  
The computer may become slow or sluggish when attempting to run other  
applications while the 3D Viewer is displayed.  
Intensely shaking the computer or other subjecting it to strong impacts may  
cause damage to the computer.  
4-46  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Basics  
Details  
To open the Details window, click the Setup Detail button in the TOSHIBA HDD  
Protection Properties window.  
Detection Level Amplification  
When the AC adaptor is disconnected or the lid is closed, HDD Detection  
assumes that the computer will be carried and sets the detection level to the  
maximum for 10 seconds.  
TOSHIBA HDD Protection Message  
Specify whether to display a message when TOSHIBA HDD Protection is active.  
This function does not work when the computer is starting, in sleep mode,  
in hibernation mode, in transition to hibernation mode, recovering from  
hibernation mode, or power off. Be sure to not subject the computer to  
vibration or impact while the function is disabled.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-47  
Operating Basics  
4-48  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Chapter 5  
The Keyboard  
The computer’s keyboard layouts are compatible with a 101/102-key enhanced  
keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard  
functions can be executed on the computer.  
The number of keys on your keyboard depends on which country/region’s  
keyboard layout your computer is configured with. Keyboards for numerous  
languages are available.  
There are six types of keys: typewriter keys, keypad overlay, function keys, soft  
keys, Windows® special keys, and cursor control keys.  
Typewriter keys  
The typewriter keys produce the upper- and lower-case letters, numbers,  
punctuation marks, and special symbols that appear on the screen.  
There are some differences, however, between using a typewriter and using a  
computer keyboard:  
n
Letters and numbers produced in computer text vary in width. Spaces,  
which are created by a “space character,” may also vary depending on line  
justification and other factors.  
n
The lowercase l (el) and the number 1 (one) are not interchangeable on  
computers as they are on a typewriter.  
n
n
The uppercase O (oh) and the 0 (zero) are not interchangeable.  
The Caps Lock function key locks only the alphabetic characters in  
uppercase while the shift lock on a typewriter places all keys in the shifted  
position.  
n
The Shift keys, the Tab key, and the BackSpace key perform the same  
function as their typewriter counterparts but also have special computer  
functions.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-1  
 
The Keyboard  
F1 ... F12 function keys  
The function keys (not to be confused with Fn) are the 12 keys at the top of your  
keyboard. These keys function differently from other keys.  
F1 through F12 are called function keys because they execute programmed  
functions when pressed. Used in combination with the Fn key, keys marked with  
icons execute specific functions on the computer. Refer to the section, Soft keys:  
Fn key combinations, in this chapter. The function executed by individual keys  
depends on the software you are using.  
Soft keys: Fn key combinations  
The Fn (function) is used in combination with other keys to form soft keys. Soft  
keys are key combinations that enable, disable or configure specific features.  
Some software may disable or interfere with soft-key operations. Soft-key  
settings are not restored by the Sleep Mode feature.  
Emulating keys on enhanced keyboard  
PRTSC  
SYSRQ  
PAUSE  
BREAK  
DEL  
INS  
BACK  
HOME  
PGUP  
PGDN  
END  
SPACE  
CAPS  
LOCK  
ENTER  
SHIFT  
SHIFT  
FN  
ALT  
CTRL  
ALT  
CTRL  
A 101-key enhanced keyboard layout  
The keyboard is designed to provide all the features of the 101-key enhanced  
keyboard, shown in figure above. The 101/102-key enhanced keyboard has a  
numeric keypad and scroll lock key. It also has additional Enter and Ctrl keys to  
the right of the main keyboard. Since the keyboard is smaller and has fewer keys,  
some of the enhanced keyboard functions must be simulated using two keys  
instead of one on the larger keyboard.  
Your software may require you to use keys that the keyboard does not have.  
Pressing the Fn key and one of the following keys simulates the enhanced  
keyboard’s functions.  
5-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Keyboard  
Press Fn + F11 to access the integrated keypad. When activated, the keys with  
gray markings on the bottom edge become numeric keypad keys. Refer to the  
Keypad overlay section in this chapter for more information on how to operate  
these keys. The power on default for both settings is off. Press Fn + F12 to lock  
the cursor on a specific line. The power on default is off.  
Hot keys  
+
Mute: Turns the volume on and off.  
+
Lock: Enters “Lock computer” mode. To restore your desktop, you need to log on  
again.  
+
Power plan: Displays the power save modes and lets you change the power  
settings.  
+
Sleep: This hot key switches the system to Sleep Mode.  
+
Hibernate: This hot key switches the system to Hibernate mode.  
+
Output: Changes the active display device.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-3  
 
The Keyboard  
+
Brightness (decreases): Turns the monitor brightness down.  
+
Brightness (increases): Turns the monitor brightness up.  
+
Wireless: Switches the active wireless devices if the wireless communication  
switch is switched on.  
+
TouchPad: Enables or disables the Touch Pad function.  
+
Enable Keypad: Enables or disables the Key Pad function.  
+
Number Lock: Enables or disables the Number Lock function.  
+
Scroll Lock: Enables or disables the Scroll Lock function.  
+
Zoom: Changes the display resolution.  
+
TOSHIBA Zooming Utility (reduce): Reduces the icon size on the desktop or the  
font size within one of the supported application windows.  
5-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Keyboard  
+
TOSHIBA Zooming Utility (enlarge): Increases the icon size on the desktop or  
the font size within one of the supported application windows.  
Before using Fn+1 and Fn+2, you must install the TOSHIBA Zooming Utility.  
The Utility only supports the following application windows: Microsoft Internet  
Explorer, Microsoft Office, Windows Media Player, Adobe Reader and the  
icons on the desktop.  
+
Keyboard Backlight (On/Off)*: Turns the backlight of the keyboard on and off.  
* This function is provided with some models.  
Fn Sticky key (Depends on the model you  
purchased)  
You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that  
is, you can press it once, release it, and then press an “F number” key. To start  
the TOSHIBA Accessibility Utility, click Start, point to All Programs, point to  
TOSHIBA, point to Utilities and click Accessibility.  
Windows® special keys  
The keyboard provides two keys that have special functions in Windows® :  
Windows® logo key activates the start menu and the other, the application key, has  
the same function as the secondary mouse button.  
This key activates the Windows® start menu.  
This key has the same function as the secondary mouse button.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-5  
 
The Keyboard  
Keypad overlay  
Your computer’s keyboard does not have an independent numeric keypad, but its  
numeric keypad overlay functions like one.  
The keys in the centre of the keyboard with gray letters make up the numeric  
keypad overlay. The overlay provides the same functions as the numeric keypad  
on the 101/102-key enhanced keyboard described previously.  
Turning on the overlays  
The numeric keypad overlay can be used for numeric data input.  
Numeric mode  
To turn on the Numeric mode, press Fn + F11. Now try numeric data entry using  
the keys in the following figure. Press Fn + F11 again to turn off the overlay.  
PRTSC  
SYSRQ  
PAUSE  
BREAK  
DEL  
INS  
BACK  
HOME  
PGUP  
PGDN  
END  
SPACE  
CAPS  
LOCK  
ENTER  
SHIFT  
SHIFT  
FN  
ALT  
CTRL  
ALT  
CTRL  
The numeric keypad overlay  
5-6  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Keyboard  
Temporarily using normal keyboard (overlay on)  
While using the overlay, you can temporarily access the normal keyboard without  
turning off the overlay:  
1. Hold Fn and press any other key. All keys will operate as if the overlay were  
off.  
2. Type upper-case characters by holding Fn + Shift and pressing a character  
key.  
3. Release Fn to continue using the overlay.  
Generating ASCII characters  
Not all ASCII characters can be generated using normal keyboard operation. But,  
you can generate these characters using their ASCII codes.  
With the overlay on:  
1
Hold down Alt.  
2. Using the overlay keys, type the ASCII code.  
3. Release Alt, and the ASCII character appears on the display screen.  
With the overlay off:  
1. Hold down Alt + Fn.  
2. Using the overlay keys, type the ASCII code.  
3. Release Alt + Fn, and the ASCII character appears on the display screen.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-7  
 
The Keyboard  
5-8  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Chapter 6  
Power and Power-Up Modes  
The computer’s power resources include the AC adaptor and internal batteries.  
This chapter gives details on making the most effective use of these resources  
including charging and changing batteries, tips for saving battery power, and  
power up modes.  
Power conditions  
The computer’s operating capability and battery charge status are affected by  
the power conditions: whether an AC adaptor is connected, whether a battery is  
installed, and what the charge level is for the battery.  
Table Power conditions  
Power On  
Power off  
(no operation)  
AC adaptor Battery fully  
• Operates  
• LED: Battery white  
connected  
charged  
• LED: Battery white  
Battery partially • Operates  
charged or no  
• Quick charge  
• Quick Charge  
• LED: Battery orange  
charge  
• LED: Battery orange  
• Operates  
No battery  
installed  
• No charge  
• No charge  
• LED: Battery off  
• LED: Battery off  
User’s Manual  
6-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Power and Power-Up Modes  
Table Power conditions  
Power On  
Power off  
(no operation)  
Universal AC Battery charge is  
• Operates  
adaptor not  
connected  
above low battery  
trigger point  
• LED: Battery off  
Battery charge is  
below low battery  
trigger point  
• Operates  
• LED: Battery flashes orange  
Battery charge is  
exhausted  
Computer shuts down  
No Battery installed • Cannot operates  
• LED: Battery off  
Power indicators  
As shown in the above table, the Battery Power indicators on the system  
indicator alert you to the computer’s operating capability and battery charge  
status.  
Battery indicator  
Check the Battery indicator to determine the status of the battery pack. The  
following indicator lights indicate the battery status:  
Flashing orange  
Orange  
The battery charge is low. The AC adaptor must  
be connected to recharge the battery.  
Indicates the AC adaptor is connected and  
charging the battery.  
White  
Indicates the AC adaptor is connected and the  
battery is fully charged.  
No light  
Under any other conditions, the indicator does not  
light.  
If the battery becomes too hot while it is being charged, the charge will stop  
and the battery indicator will go out. When the battery’s temperature falls to a  
normal range, charge will resume. This occurs whether the computer’s power  
is on or off.  
6-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Power and Power-Up Modes  
Power indicator  
Check the Power indicator to determine the power status:  
White  
Indicates power is being supplied to the computer  
and the computer is turned on.  
Blinking orange  
Indicates power is being supplied to the computer  
while the computer is in Sleep Mode. The  
indicator turns on for one second and off for two  
seconds.  
No light  
Under any other conditions, the indicator does not  
light.  
Battery types  
The computer has the following batteries:  
n
n
Battery pack ( 6cell or 12cell depending on the model.)  
Real Time Clock (RTC) battery  
n
The battery pack is a lithium ion battery, which can explode if not properly  
replaced, used, handled or disposed of. Dispose of the battery as required  
by local ordinances or regulations. Use only batteries recommended by  
TOSHIBA as replacements.  
n
Do not remove the battery pack while the computer is in Sleep Mode.  
Data is stored in RAM, so if the computer loses power it will be lost. When  
the computer is powered off in Sleep Mode, and the AC adaptor is not  
connected, the main battery pack supplies power to maintain data and  
programs in memory. If the battery pack is completely discharged, Sleep  
Mode does not function and the computer loses all data in memory.  
Battery pack  
When the AC adaptor is not connected, the computer’s main power source is a  
removable lithium ion battery pack, also referred to in this manual as the main  
battery. You can purchase additional battery packs for extended use of the  
computer away from an AC power source.  
Before you remove the battery pack, set the computer to Hibernation Mode or  
save your data and shut down the computer. Do not change the battery pack while  
the AC adaptor is connected.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-3  
 
Power and Power-Up Modes  
Battery pack  
To ensure that the battery pack maintains its maximum capacity, operate the  
computer on battery power at least once a month until the battery pack is fully  
discharged. Refer to Extending battery life in this chapter for procedures. If the  
computer is continuously operated on AC power through an AC adaptor for an  
extended period, more than a month, the battery may fail to retain a charge. It  
may not function efficiently over the expected life of the battery and the Battery  
indicator may not indicate a low-battery condition.  
Real Time Clock battery  
The Real Time Clock (RTC) battery provides power for the internal real time clock  
and calendar. It also maintains the system configuration.  
If the RTC battery becomes completely discharged, the system loses this data and  
the real time clock and calendar stop working.  
The computer’s RTC battery is a lithium ion battery and should be replaced  
only by your dealer or by a TOSHIBA service representative. The battery can  
explode if not properly replaced, used, handled or disposed of. Dispose of the  
battery as required by local ordinances or regulations  
n
n
You can change the settings of the Real Time Clock by pressing F2 in  
POST.  
After configuring the time and date for the Real Time Clock battery, we  
recommend that you turn the power status of your computer to “ON”  
so that the Real Time Clock battery is charged. Refer to Chapter 9  
Troubleshooting, for details.  
If the following message is displayed on the LCD:  
ERROR 0271: Check date and time settings.  
WARNING 0251: System CMOS checksum bad-Default  
configuration used.  
Press [F1] to resume, [F2] to setup.  
6-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Power and Power-Up Modes  
The charge in the RTC battery is getting low or has been exhausted. You will need  
to set the date and time within the BIOS setup using the following steps:  
1. Press F2 key - the BIOS setup screen will be displayed.  
2. Set the date in System Date.  
3. Set the time in System Time.  
4. Press F10 key. Confirmation message will appear.  
Press Enter key. BIOS setup will terminate and the computer will be rebooted.  
After configuring the date and time it is recommended that you switch the  
computer on and then leave it in this state so that the Real Time Clock battery  
can be charged.  
Care and use of the battery pack  
This section provides the important safety precautions in order to handle your  
battery pack properly.  
Refer to the enclosed Instruction Manual for Safety and Comfort for detailed  
precautions and handling instructions.  
n
n
Make sure the battery is securely installed in the computer before  
attempting to charge the battery pack. Improper installation could  
generate smoke or fire, or cause the battery pack to rupture.  
Keep the battery pack out of reach of infants and children. It can cause  
injury.  
n
n
n
The battery pack is lithium ion battery, which can explode if not replaced,  
used, handled or disposed of properly. Dispose of the battery as required  
by local ordinances or regulations. Use only batteries recommended by  
TOSHIBA as replacements.  
Charge the battery pack only in an ambient temperature between 5  
and 35 degrees Celsius. Otherwise, the electrolyte solution might leak,  
battery pack performance might deteriorate and the battery life might be  
shortened.  
Never install or remove the battery pack without first turning off the power  
and disconnecting the AC adaptor. Never remove the battery pack while  
the computer is in Sleep Mode. Data could be lost.  
Never remove the battery pack while the Wake-up on LAN function is  
enabled. Data will be lost. Before you remove a battery pack, disable the  
Wake-up on LAN function.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-5  
 
Power and Power-Up Modes  
Charging the batteries  
When the power in the battery pack becomes low, the Battery indicator flashes  
orange indicating that only a few minutes of battery power remain. If you continue  
to use the computer while the Battery indicator flashes, the computer enables  
Hibernation Mode (so you don’t lose data) and automatically turns off.  
You must recharge a battery pack when it becomes discharged.  
Procedures  
To recharge a battery pack while it is installed in the computer, connect the AC  
adaptor to the DC IN 19V jack and plug the other end into a working outlet.  
The Battery indicator glows orange when the battery is being charged.  
Use only the computer connected to an AC power source to charge the battery  
pack. Never attempt to charge the battery pack with any other charger.  
Time  
The following table shows the approximate time required to fully charge a  
discharged battery.  
Charging time (hours)  
Battery type  
Power on  
Power off  
Battery pack  
(6cell, 12cell)  
4-10 hours  
4 hours max  
RTC Battery  
About 24 hours  
About 24 hours  
The charging time when the computer is on is affected by ambient  
temperature, the temperature of the computer and how you use the computer.  
If you make heavy use of external devices, for example, the battery might  
scarcely charge at all during operation. Refer also to the section Maximizing  
Battery charging notice  
The battery may not charge right away under the following conditions:  
n
n
The battery is extremely hot or cold. If the battery is extremely hot, it might  
not charge at all. To ensure the battery charges to its full capacity, charge the  
battery at room temperature of 10° to 30°C (50° to 88°F).  
The battery is nearly completely discharged. Leave the AC adaptor connected  
for a few minutes and the battery should begin charging.  
6-6  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Power and Power-Up Modes  
The Battery indicator may show a rapid decrease in battery operating time when  
you try to charge a battery under the following conditions:  
n
n
The battery has not been used for a long time.  
The battery has completely discharged and been left in the computer for a  
long time.  
n
A cool battery is installed in a warm computer.  
In such case, follow the steps below.  
1. Fully discharge the battery by leaving it in the computer with the power on until  
the power automatically shuts off.  
2. Plug in the AC adaptor.  
3. Charge the battery until the Battery indicator glows blue.  
Repeat these steps two or three times until the battery recovers normal capacity.  
Leaving the AC adaptor connected will shorten battery life. At least once a  
month, run the computer on battery power until the battery is fully discharged,  
then recharge the battery.  
Monitoring battery capacity  
Remaining battery power can be monitored using the following methods.  
n
n
Clicking the battery icon on the task bar  
Via the Windows Mobility Center window  
n
Wait at least 16 seconds after turning on the computer before trying to  
monitor the remaining operating time. The computer needs this time to  
check the battery’s remaining capacity and to calculate the remaining  
operating time, based on the current power consumption rate and  
remaining battery capacity. The actual remaining operating time may differ  
slightly from the calculated time.  
n
With repeated discharges and recharges, the battery’s capacity will  
gradually decrease. Therefore, an often used, older battery will not  
operate for as long as a new battery even when both are fully charged.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-7  
 
Power and Power-Up Modes  
Maximizing battery operating time  
A battery’s usefulness depends on how long it can supply power on a single  
charge. How long the charge lasts in a battery depends on:  
n
n
n
n
n
n
n
n
n
CPU processing speed (Depends on the model you purchased)  
Screen brightness  
Cooling method (Depends on the model you purchased)  
System Sleep Mode  
System Hibernation  
Monitor power off  
How often and how long you use the hard disk, optical disc.  
How much charge the battery contained to begin with.  
How you use optional devices, such as a PC Card, to which the battery  
supplies power.  
n
Enabling Sleep Mode conserves battery power if you are frequently turning  
the computer off and on.  
n
n
n
n
Where you store your programs and data.  
Closing the display when you are not using the keyboard saves power.  
Operating time decreases at low temperatures.  
The condition of the battery terminals. Make sure the battery terminals stay  
clean by wiping them with a clean dry cloth before installing the battery pack.  
Retaining data with power off  
When you turn off your computer with fully charged batteries, the batteries retain  
data for the following approximate time periods.  
Battery pack  
(6cell, 12cell)  
Approximately 2 days  
(Sleep mode, 6cell)  
Approximately 4 days  
(Sleep mode, 12cell)  
Approximately 5 days  
(Shutdown mode, 6cell)  
Approximately 10 days  
(Shutdown mode, 12cell)  
RTC battery  
Approximately 3 months  
6-8  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Power and Power-Up Modes  
Extending battery life  
To maximize the life of your battery pack:  
n
At least once a month, disconnect the computer from a power source and  
operate it on battery power until the battery pack fully discharges. Before  
doing so, follow the steps below.  
1. Turn off the computer’s power.  
2. Disconnect the AC adaptor and turn on the computer’s power. If it does not  
turn on go to step 4.  
3. Operate the computer on battery power for five minutes. If the battery pack  
has at least five minutes of operating time, continue operating until the battery  
pack is fully discharged. If the Battery indicator flashes or there is some other  
warning to indicate a low battery, go to step 4.  
4. Connect the AC adaptor to the computer and the power cord to a power outlet.  
The Battery indicator should glow orange to indicate that the battery pack  
is being charged. If the Battery indicator does not glow, power is not being  
supplied. Check the connections for the AC adaptor and power cord.  
5. Charge the battery pack until the Battery indicator glows white.  
n
n
If you have extra battery packs, rotate their use.  
If you will not be using the system for an extended period, more than one  
month, remove the battery pack.  
n
Store spare battery packs in a cool dry place out of direct sunlight.  
Replacing the battery pack  
When the battery pack reaches the end of its operating life you will need to install  
a new one. The life of the battery pack is generally about 500 recharges. If the  
Battery indicator flashes orange shortly after fully recharging the battery, the  
battery pack needs to be replaced.  
You might also replace a discharged battery pack with a charged spare when  
you are operating your computer away from an AC power source. This section  
explains how to remove and install the battery pack.  
Removing the battery pack  
To replace a discharged battery, follow the steps below.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-9  
 
Power and Power-Up Modes  
n
When handling battery packs, do not short-circuit the terminals. Also do  
not drop, hit or otherwise apply impact; do not scratch or break the casing  
and do not twist or bend the battery pack.  
n
n
Do not remove the battery pack while the computer is in Sleep Mode.  
Data is stored in RAM, so if the computer loses power it will be lost.  
In Hibernation Mode, data will be lost if you remove the battery or  
disconnect the AC adaptor before the save is completed. Wait for the  
Built-in HDD indicator to go out.  
n
Do not touch the latch while holding the computer. Or you may get injured  
by the dropped battery by unintentional release of the latch.  
1. Save your work.  
2. Turn the computer’s power off. Make sure the Power indicator is off.  
3. Remove all cables connected to the computer.  
4. Turn the computer upside down.  
5. Slide and hold the battery release latch to free the battery pack after moving  
the battery pack lock into its unlock position - then slide the battery pack out of  
the computer.  
2
3
1
Releasing the battery pack  
1. Battery Pack Lock  
2. Battery Pack  
3. Battery Release Latch  
6-10  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power and Power-Up Modes  
Installing the battery pack  
To install a battery, follow the steps below.  
n
The battery pack is a lithium ion battery, which can explode if not properly  
replaced, used, handled or disposed of. Dispose of the battery as required  
by local ordinances or regulations. Use only batteries recommended by  
TOSHIBA as replacements.  
n
Do not touch the battery release latch while holding the computer or the  
battery pack might fall out due to the unintentional release of the battery  
release latch and cause injuries.  
1. Turn the computer’s power off.  
2. Disconnect all cables connected to the computer.  
3. Insert the battery pack.  
4. Ensure the battery pack lock is moved into its locked position.  
2
1
Securing the battery pack  
1.  
Battery Pack Lock  
2.  
Battery Pack  
Starting the computer by password  
To start up the computer with the user password, follow these steps:  
1. Turn on the power as described in Chapter 3, Getting Started. The following  
message appears:  
Password=  
At this point, the hotkeys Fn + F1 to F9 do not work. They will function after  
you enter the password.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-11  
 
Power and Power-Up Modes  
2. Enter the password.  
3. Press Enter.  
If you enter the password incorrectly three times in a row, the computer shuts  
off. In this case, you must turn the computer back on to retry password entry.  
or if available  
Swipe your fingerprint on the sensor if you have already registered the fingerprint  
with the Fingerprint utility and enabled Fingerprint Power on Security. If you  
would not like to swipe your finger or cannot authenticate the fingerprint for some  
reasons, push the BkSp key to skip the fingerprint authentication screen. You can  
try to swipe the fingerprint up to five times. If you failed fingerprint authentication  
more than five times, you must enter the password manually to start the computer.  
Power-up modes  
The computer has the following power-up modes:  
n
Boot Mode: Computer shuts down without saving data. Always save your work  
before you turn the computer off in boot mode.  
n
n
Hibernation Mode: Data in memory is saved to the hard disk.  
Sleep Mode: Data is maintained in the computer’s main memory.  
Refer also to the sections Turning on the power and Turning off the power in  
Chapter 3, Getting Started.  
Hot keys  
You can use hot keys Fn + F3 to enter Sleep Mode and Fn + F4 to enter  
Hibernation Mode. Refer to Chapter 5, The Keyboard for details.  
Panel power off/on  
You can set up your computer so that power turns off automatically when you  
close the display panel. When you open the panel, power turns on in Sleep Mode  
or Hibernation Mode but not in boot mode.  
If the panel power off function is enabled and you use Shut down Windows®,  
do not close the display until the shut down function is completed.  
System Auto Off  
This feature turns the system off automatically if it is not used for a set duration.  
The system shuts down in Sleep Mode or Hibernation Mode in Windows®.  
6-12  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TOSHIBA  
Chapter 7  
HW Setup  
This chapter explains how to use TOSHIBA HW Setup program to configure your  
computer. TOSHIBA HW Setup lets you configure settings for General, Password,  
Display, Boot Priority, Keyboard, LAN, and USB.  
Accessing HW Setup  
To run HW Setup, click  
, All Programs, TOSHIBA, Utilities, HWSetup.  
HW Setup Window  
The HW Setup window contains the following tabs: General, Password, Display,  
Boot Priority, Keyboard, USB and LAN . There are also these three buttons:  
OK  
Accepts your changes and closes the HW Setup  
window.  
Cancel  
Apply  
Closes the window without accepting your changes.  
Accepts all your changes without closing the HW  
Setup window.  
General  
This window displays the BIOS version and contains two buttons:  
Default  
About  
Return all HW Setup values to the factory settings.  
Display the HW Setup version.  
Setup  
This field displays BIOS Version and date.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-1  
 
HW Setup  
Password  
This tab allows you to set or reset the user password for power on.  
User Password  
Lets you register a new password or un-register an existing password.  
Not Registered  
Registered  
Un-registers an existing password  
Register a new password by following the on screen  
instructions  
Owner String  
This blank field is used to display a message when the password field is displayed  
on startup. If a password is not registered the message will not be shown. The  
maximum length is 256 characters.  
Display  
This tab lets you select the internal LCD and/or external monitor when the  
computer boots up.  
Power On Display  
Lets you select the display to be used when the computer is booted (This setting  
is only available on Standard VGA mode and not available on Windows® Desktop).  
Auto-Selected  
If any external display is connected, the power  
on display will be in external display only mode.  
otherwise it will be in LCD only mode.  
System LCD only  
Irrespective of external display connection, the power  
on display will be in integrated LCD only mode.  
Boot Priority  
Boot Priority Options  
This option sets the priority for booting the computer.  
To select the boot drive you want, follow the steps below.  
1. Boot-up your computer and press F12 to enter the boot menu.  
2. The boot select screen will be displayed: Hard disk Drive, CD/DVD, FDD and  
LAN.  
3. Use the upper/lower cursor keys to highlight the boot device you want and  
apply.  
7-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
HW Setup  
Keyboard  
Wake-up on Keyboard  
When this feature is enabled and the computer is in Sleep Mode, you can turn on  
the computer by pressing any key. It is effective only for the internal keyboard and  
only when the computer is in Sleep Mode.  
Enabled  
Disabled  
Enables the Wake-up on Keyboard function.  
Disables the Wake-up on Keyboard function  
(Default).  
USB  
Legacy USB Support  
Use this option to enable or disable Legacy USB support. If your operating system  
does not support USB, you can still use a USB mouse, keyboard, and FDD by  
setting the Legacy USB Support to enable.  
LAN  
Wake-up on LAN  
This feature lets the computer’s power be turned on from shutdown when it  
receives a wake-up packet (Magic packet) from the LAN.  
Regarding Wake-up on LAN from Sleep or Hibernation mode, you must check  
the “Allow the device to wake the computer” checkbox within the LAN Device  
properties.  
(This feature does not affect the Wake-up on LAN from Sleep or Hibernation  
mode.)  
Enabled  
Disabled  
Enables Wake-up on LAN  
Disables Wake-up on LAN (Default).  
Built-in LAN  
This feature enables or disables the Built-in LAN.  
Enabled  
Disabled  
Enables Built-in LAN function (Default).  
Disables Built-in LAN function.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-3  
 
HW Setup  
Illumination  
Illumination ON/OFF  
This feature allows you to set the conditions around the illumination LED.  
On  
Off  
On (Default).  
Off.  
Keyboard Backlight  
This feature allows you to set the conditions around the keyboard backlight LED.  
Auto  
Keyboard backlight will be on when hit any key.  
After [Backlight Lighting Time], backlight will be off.  
[Backlight Lighting Time] is 15 sec by default.  
On  
On. (Pressing FN + Z or FN + z switches the  
keyboard backlight on or off.)  
OFF  
Off. (Pressing FN + Z or FN + z switches the  
keyboard backlight on or off.)  
Button Setting  
Function Button  
This feature allows you to set the conditions for the power button and/or other  
buttons.  
Enabled  
Disabled  
Enable the function button (Default).  
Disable the function button.  
7-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Chapter 8  
Optional Devices  
Optional devices can expand the computer’s capabilities and its versatility. This  
chapter describes connection or installation of the following devices, which are  
available from your TOSHIBA dealer:  
Cards/memory  
n
n
ExpressCard  
SD (Secure Digital) / SDHC (Secure Digital High Capacity) / MMC (Multi  
Media Card) / MEMORY STICK / MEMORY STICK PRO / xD (xDPicture  
Card) cards  
n
Memory expansion  
Power devices  
n
n
Additional battery pack  
Additional AC adaptor  
Peripheral devices  
n
External monitor  
Other  
n
Security lock  
User’s Manual  
8-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Optional Devices  
ExpressCard Slot  
The computer is equipped with an ExpressCard slot that can accommodate one  
ExpressCard.  
Inserting an ExpressCard  
One ExpressCard connector is located on the left side of the computer. The  
computer’s hot-install feature lets you install ExpressCard while the computer’s  
power is on.  
To install an ExpressCard, follow the steps below.  
1. Insert the ExpressCard.  
2. Press gently to ensure a firm connection.  
Windows® hot-install feature lets you insert an ExpressCard while the computer’s  
power is on.  
Inserting the ExpressCard  
After inserting the card, refer to the card’s documentation and check the  
configuration in Windows® to make sure it is appropriate for your card.  
8-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Optional Devices  
Removing an ExpressCard  
n
n
Before removing an ExpressCard, make sure that any applications or  
system services do not use the card.  
Be sure to disable the ExpressCard prior to removing it. Otherwise, the  
system may be fatally damaged.  
To remove the ExpressCard, follow the steps below.  
1. Click the Safety Remove Hardware icon on the Task Bar.  
2. Click the ExpressCard you want to remove.  
3. Press the ExpressCard once to extend it.  
4. Grasp the extended ExpressCard, and remove it.  
Removing the ExpressCard  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8-3  
 
Optional Devices  
SD/SDHC/MMC/MEMORY STICK / MEMORY STICK  
PRO/xD Memory cards  
The computer is equipped with a multiple digital media card slot that can  
accommodate SD/SDHC/MMC/MEMORY STICK/ MEMORY STICK PRO/xD  
memory cards. These memory cards let you easily transfer data from devices,  
such as digital cameras and Personal Digital Assistants, which use flash-memory.  
Card Type  
Capacities  
SD  
up to 2GB  
SDHC  
up to 16GB  
MMC  
up to 2GB  
MEMORY STICK  
MEMORY STICK PRO  
xD  
up to 128MB, 256MB (128MB x 2)  
up to 4GB  
up to 2GB  
Keep foreign objects out of the memory card slot. A pin or similar object can  
damage the computer’s circuitry.  
Do not format a memory card with Windows® as it might result in that card not  
being able to be used with some peripheral devices.  
Do not insert Memory Stick Duo/PRO Duo into the slot without the MEMORY  
STICK adapter. Data may be lost or damaged if you use any card other than  
those supported.  
The card is designed so that it can be inserted only one way. Do not try to  
force the card into the slot.  
For more details on using memory cards, see manuals accompanying the  
cards.  
The Logo of SD memory card is  
.
The Logo of SDHC memory card is  
.
8-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Optional Devices  
Installing a memory card  
To install a memory card:  
1. Insert the memory card.  
2. Press gently to ensure a firm connection.  
Inserting a memory card  
Be sure the memory card is oriented properly before you insert it. If Windows®  
fails to read the card, remove it then re-insert it.  
The multiple digital media card slot only accepts one type of card at a time. Do  
not attempt to install more than one card as you risk damaging either the cards  
themselves or the computer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8-5  
 
Optional Devices  
Removing a memory card  
To remove a memory card, follow the steps below:  
1. Click the Safely Remove Hardware icon on the Taskbar.  
2. Select a device, then click the Stop button. A confirmation dialog may appear,  
depending on how the device is registered with the system; if so, confirm that  
you want to remove the device.  
3. Gently press the memory card inside the socket to eject it.  
4. Grasp the card and remove it.  
Removing a memory card  
n
Make sure the memory card indicator is out before you remove the card or  
turn off the computer’s power. If you remove the card or turn off the power  
while the computer is accessing the card you may lose data or damage  
the card.  
n
n
Do not remove the card while the computer is in Sleep or Hibernation  
mode. The computer could become unstable or data in the memory card  
could be lost.  
Do not turn off or place the computer into either Sleep Mode or  
Hibernation Mode while data is being transferred to or from the memory  
card. The system may become unstable or data in the memory card may  
be lost.  
8-6  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Optional Devices  
Memory card care  
Set the write-protect switch to the lock position, if you do not want to record  
data.  
1. Do not write to a memory card if the battery power is low. Low power could  
affect writing accuracy.  
2. Do not remove a memory card while read/write is in progress.  
3. The memory card is designed so that it can be inserted only one way. Do not  
try to force the card into the slot.  
4. Do not leave a memory card partially inserted in the slot. Press the memory  
card until you hear it click into place.  
5. Do not twist or bend memory cards.  
6. Do not expose memory cards to liquids or store in humid areas or lay media  
close to containers of liquid.  
7. After using a memory card, return it to its case.  
8. Do not touch the metal part or expose it to liquids or let it get dirty.  
Memory expansion  
You can install additional memory in the computer’s memory module socket to  
increase the amount of RAM. This section describes how to install and remove a  
memory module.  
n
n
Use only memory modules approved by TOSHIBA.  
Do not try to install or remove a memory module under the following  
conditions. You can damage the computer and the module. Also, data will  
be lost.  
a. The computer is turned on.  
b. The computer was shut down using the Sleep Mode or Hibernation Mode.  
n
When incorrect memory is inserted, please refer to Memory expansion  
section in Chapter 9, Troubleshooting, for details.  
n
Expansion memory is a precision electronic component that may be fatally  
damaged by static electricity. Since the human body has slight static  
electricity, be sure to discharge static electricity from your body before  
installing an expansion memory module. To discharge your body’s static  
electricity, simply touch any metal close to you with bare hands.  
Use a point size 1 Phillips screwdriver to remove and fasten the screws. Use  
of an incorrect screwdriver can damage the screw heads.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8-7  
 
Optional Devices  
Installing a memory module  
Follow the steps below to install a memory module.  
1. Set the computer to boot mode and turn off the power.  
2. Remove all cables connected to the computer.  
3. Turn the computer upside down and remove the battery pack (refer to Chapter  
4. Loosen the screws securing the memory module cover.  
5. Slide your fingernail or a thin object under the cover and lift it off.  
Hard Disk  
and Mem-  
ory Module  
Cover  
Removing the memory module cover  
6. Lift one side of the insulator sheet and fit the module’s connectors into the  
computer’s connectors at about a 45 degree angle. Press the module carefully  
to ensure a firm connection.  
Do not touch the connectors on the memory module or on the computer.  
Debris on the connectors may cause memory access problems.  
Slot A is reserved for main memory. Slot B is for expanded memory. If only one  
memory module is installed, use Slot A. Slot A is lower than slot B.  
8-8  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Devices  
7. Push the module down so it lies flat. Latches on either side will click into place  
to secure the module.  
2
1
Installing the memory module  
8. Seat the cover and secure it with the screws.  
9. Replace the battery pack as described in Chapter 6, Power and Power- Up  
Modes.  
10. Turn the power on and make sure the added memory is recognized. Open  
System in the Control Panel and click the General tab.  
Points to note about memory module error  
If you install a memory module that is not compatible with the computer, the Power  
indicator will flash (on for 0.5 seconds, off for 0.5 seconds) in the following ways:  
n
n
n
If there is only an error in Slot A: repeatedly flashes orange twice, then blue.  
If there is only an error in Slot B: repeatedly flashes orange, then blue twice.  
If there is an error in Slot A and in Slot B: repeatedly flashes orange twice,  
then blue twice.  
In all instances you should shut down the computer and remove the incompatible  
module(s)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8-9  
Optional Devices  
Removing a memory module  
To remove the memory module, make sure the computer is in boot mode then:  
1. Be sure the power is off and all cables are disconnected from thecomputer.  
2. Turn the computer upside down and remove the battery and the screws  
securing the memory module cover.  
3. Slide your fingernail or a thin object under the cover and lift it off.  
4. Lift one side of the insulator and push the latches to the outside to release the  
module. A spring will force one end of the module up.  
5. Grasp the module by the sides and pull it out.  
n
If you use the computer for a long time, the memory modules will become  
hot. In this case, let the memory modules cool to room temperature before  
you replace them. Or you will get burnt if you touch any of them.  
n
Do not touch the connectors on the memory module or on the computer.  
Debris on the connectors may cause memory access problems.  
2
1
3
Removing the memory module  
6. Seat the cover and secure it with screws and replace the battery pack.  
8-10  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Devices  
Additional battery pack  
You can increase the portability of the computer with additional battery packs. If  
you’re away from an AC power source and your battery runs low, you can replace  
it with a freshly charged battery. Refer to Chapter 6, Power and Power-Up Modes.  
Additional AC adaptor  
If you frequently transport the computer between different sites such as your home  
and office, purchasing an AC adaptor for each location will reduce the weight and  
bulk of your carrying load.  
External monitor  
An external analog monitor can be connected to the external monitor port on the  
computer. The computer supports several video modes. Refer to Appendix B,  
Display Controller. To connect a monitor, follow the steps below.  
1. Turn the computer off.  
2. Connect the monitor to the external monitor port.  
3. Turn the monitor’s power on.  
4. Turn the computer on.  
When you turn on the power, the Windows® Bootup screen (Windows® Logo)  
appears on the display device.  
However, the Windows® Desktop appears on a display device that you used  
last time to shut down your PC, if the display device exists when you turn on the  
power.  
To change the display settings, press Fn+F5. If you disconnect the monitor before  
you turn the computer off, be sure to press Fn+F5 to switch to the internal display.  
Refer to Chapter 5, The Keyboard, for details on using hot keys to change the  
display setting.  
HDMI  
A HDMI monitor can be connected to the HDMI out port on the computer. 1080p,  
1080i, 720p, 576p and 480p signal formats can be supported. But actual signal  
format you can use depends on HDMI monitor. To connect monitor, follow the  
steps as detailed below:  
As the port operation of all HDMI (High-Definition Multimedia Interface)  
monitors has not been confirmed, some HDMI monitors may not function  
properly.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8-11  
 
Optional Devices  
1. Plug one end of the HDMI cable into the HDMI port of the HDMI device.  
HDMI  
Connecting a HDMI cable  
2. Plug the other end of the HDMI cable into the HDMI out port on your  
computer.  
Setting for display video on HDMI  
To view video on the HDMI device, be sure to configure the following settings  
otherwise you may find that nothing is displayed.  
n
Be Sure to use the FN + F5 hot keys to select the display device before  
starting to play video. Do not change the display device while playing  
video.  
n
n
n
Do not change the display device under the following conditions.  
While data is being read or written.  
While communication is being carried out.  
8-12  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Devices  
Settings for audio on HDMI  
To set the audio device to use the HDMI, follow the steps below.  
1. Click Start.  
2. Click Control Panel.  
3. Click Hardware and Sound.  
4. Click Sound.  
5. Click Digital Output Device (HDMI).  
6. Click the Set Default Device button.  
To set the audio device to use internal speaker, follow the steps below.  
1. Click Start.  
2. Click Control Panel.  
3. Click Hardware and Sound.  
4. Click Sound.  
5. Click Speakers.  
6. Click the Set Default Device button.  
Security lock  
Security locks enable you to anchor your computer to a desk or other heavy object  
to help prevent unauthorized removal of the computer.  
The computer has a security lock slot on the left side. Attach one end of the cable  
to a desk and the other end to the security lock slot.  
1. Turn the computer so the left side faces you.  
2. Align the holes for the security lock and attach the lock.  
Security lock  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8-13  
 
Optional Devices  
8-14  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Chapter 9  
Troubleshooting  
TOSHIBA designed the computer for durability. However, should problems occur,  
following the procedures in this chapter can help to determine the cause.  
All readers should become familiar with this chapter. Knowing what might go  
wrong can help prevent problems from occurring.  
Problem solving process  
Resolving problems will be much easier if you observe the following  
guidelines:  
n
Stop immediately when you recognize a problem exists. Further action may  
result in data loss or damage. You may destroy valuable problem related  
information that can help solve the problem.  
n
Observe what is happening. Write down what the system is doing and what  
actions you performed immediately before the problem occurred. If you have a  
printer attached, print a copy of the screen using PrtSc.  
The questions and procedures offered in this chapter are meant as a guide, they  
are not definitive problem solving techniques. Many problems can be solved  
simply, but a few may require help from your dealer. If you find you need to consult  
your dealer or others, be prepared to describe the problem in as much detail as  
possible.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-1  
 
Troubleshooting  
Preliminary checklist  
Consider the simplest solution first. The items in this checklist are easy to fix and  
yet can cause what appears to be a serious problem.  
n
n
Make sure you turn on all peripheral devices before you turn on the computer.  
This includes your printer and any other external device you are using.  
Before you attach an external device, turn the computer off. When you turn  
the computer back on it recognizes the new device.  
n
n
Make sure all options are set properly in the setup program.  
Check all cables. Are they correctly and firmly attached? Loose cables can  
cause signal errors.  
n
n
Inspect all connecting cables for loose wires and all connectors for loose pins.  
Check that your CD/DVD/CD-RW is correctly inserted.  
Make notes of your observations and keep them in a permanent error log. This will  
help you describe your problems to your dealer. If a problem recurs, the log will  
help you identify the problem faster.  
Analyzing the problem  
Sometimes the system gives clues that can help you identify why it is  
malfunctioning. Keep the following questions in mind:  
n
n
n
Which part of the system is not operating properly: keyboard, hard disk drive,  
optical media drive, display. Each device produces different symptoms.  
Is the operating system configuration set properly? Check the configuration  
options.  
What appears on the display screen? Does it display any messages or  
random characters? Print a copy of the screen if you have a printer attached.  
Look up the messages in the software and operating system documentation.  
Check that all connecting cables are correctly and firmly attached. Loose  
cables can cause erroneous or intermittent signals.  
n
n
Do any indicators light? Which ones? What color are they? Do they stay on or  
blink? Write down what you see.  
Do you hear any beeps? How many? Are they long or short? Are they high  
pitched or low? Is the computer making any unusual noises? Write down what  
you hear.  
Record your observations so you can describe them to your dealer.  
9-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Software  
The problems may be caused by your software  
or disc. If you cannot load a software package,  
the media may be damaged or the program might  
be corrupted. Try loading another copy of the  
software.  
If an error message appears while you are  
using a software package, check the software  
documentation. These documents usually include  
a problem solving section or a summary of error  
messages.  
Next, check any error messages in the operating  
system documentation.  
Hardware  
If you cannot find a software problem, check your  
hardware.  
First run through the items in the preliminary  
checklist above. If you still cannot correct  
the problem, try to identify the source. The  
next section provides checklists for individual  
components and peripherals.  
Before using a peripheral device or application software that is not an  
authorized Toshiba part or product, make sure the device or software can be  
used with your computer. Use of incompatible devices may cause injury or  
may damage your computer.  
Hardware and system checklist  
This section discusses problems caused by your computer’s hardware or attached  
peripherals. Basic problems may occur in the following areas:  
n
n
n
n
n
n
n
n
n
n
n
n
System start-up  
Self test  
n
n
n
n
n
n
n
n
n
n
n
n
Fingerprint Sensor  
USB device  
Power  
eSATA device  
Additional memory module  
Sound system  
Volume control dial  
External monitor  
Modem  
Password  
Keyboard  
Internal display panel  
Hard disk drive  
DVD Super Multi Double Layer drive  
USB floppy diskette drive  
ExpressCard  
LAN  
Wireless LAN  
Bluetooth  
SD/SDHC memory card  
Pointing Device  
Recovery Discs  
User’s Manual  
9-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
System start-up  
When the computer does not start properly, check the following items:  
n
n
n
Self Test  
Power Sources  
Power-on Password  
Self test  
When the computer starts up, the self test will be run automatically, and the  
following will be displayed:  
TOSHIBA  
Leading Innovation >>>  
This message remains on the screen for a few seconds.  
If the self test is successful, the computer tries to load the operating system,  
depending on how the Boot Priority is set in the TOSHIBA HW Setup program.  
If any of the following conditions are present, the self test failed:  
n
n
n
The computer stops and does not proceed to display information or messages  
except the TOSHIBA logo.  
Random characters appear on the screen, and the system does not function  
normally.  
The screen displays an error message.  
Turn off the computer and check all cable connections. If the test fails again,  
contact your dealer.  
Power  
When the computer is not plugged into an AC outlet, the battery pack is the  
primary power source. However, your computer has a number of other power  
resources, including an intelligent power supply and a Real Time Clock battery.  
These resources are interrelated and any one could affect apparent power  
problems. This section provides checklists for AC power and the battery. If you  
cannot resolve a problem after following them, the cause could lie with another  
power resource. In such a case, contact your dealer.  
Overheating power down  
If the computer’s internal temperature becomes too high, the computer will  
automatically enter Hibernation Mode or Sleep Mode and shut down. If the  
computer has reached room temperature and still does not start, or if it starts but  
shuts down quickly contact your dealer.  
9-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Procedure  
Computer shuts down  
and DC IN indicator  
blinks orange.  
Leave the computer off until the DC IN indicator  
stops blinking.  
It is recommended to leave the computer off until the interior reaches room  
temperature even though the DC IN indicator stops blinking.  
If the computer has reached room temperature and  
it still does not start, or if it starts but shuts down  
quickly, contact your reseller, dealer or service  
provider.  
Computer shuts down  
and its DC IN indicator  
is flashing white.  
This indicates a problem with the heat dispersal  
system - you should contact your reseller, dealer or  
service provider.  
AC power  
If you have trouble turning on the computer with the AC adaptor connected, check  
the Battery indicator. Refer to Chapter 6, Power and Power-Up Modes for more  
information.  
Problem  
Procedure  
AC adaptor doesn’t  
power the computer  
Check the connections. Make sure the cord is  
firmly connected to the computer and a power  
outlet.  
Check the condition of the cord and terminals. If  
the cord is frayed or damaged, replace it. If the  
terminals are soiled, wipe them with cotton or a  
clean cloth.  
If the AC adaptor still does not power the  
computer, contact your dealer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-5  
 
Troubleshooting  
Battery  
If you suspect a problem with the battery, check the Battery indicator. For  
information on indicator and battery operation refer to Chapter 6, Power and  
Problem  
Procedure  
Battery doesn’t  
power the computer  
The battery may be discharged. Connect the AC  
adaptor to charge the battery.  
Battery doesn’t  
charge when the AC  
adaptor is attached  
(Battery indicator  
does not glow  
If the battery is completely discharged, it will not  
begin charging immediately. Wait a few minutes.  
If the battery still does not charge, make sure the  
outlet of the AC adaptor is supplying power.  
Test it by plugging in an appliance.  
orange.)  
Check whether the battery is hot or cold to the  
touch. If the battery is too hot or too cold, it will not  
charge properly. Let it reach room temperature.  
Unplug the AC adaptor and remove the battery to  
make sure the terminals are clean. If necessary  
wipe them with a soft dry cloth dipped in alcohol.  
Connect the AC adaptor and replace the battery.  
Make sure it is securely seated.  
Check the Battery indicator. If it does not glow,  
let the computer charge the battery for at least  
20 minutes. If the Battery indicator glows after  
20 minutes, let the battery continue to charge at  
least another 20 minutes before turning on the  
computer.  
If the indicator still does not glow, the battery may  
be at the end of its operating life. Replace it.  
If you do not think the battery is at the end of its  
operating life, see your dealer.  
Battery doesn’t  
power the computer  
as long as expected  
If you frequently recharge a partially charged  
battery, the battery might not charge to its full  
potential. Fully discharge the battery, then try to  
charge it again.  
Check the power consumption settings in the  
Power Options. Consider using a power saving  
feature.  
9-6  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Disposing of PC and PC batteries  
n
Discard this PC in accordance with applicable laws and regulations. For  
further information, contact your local government.  
n
This PC contains rechargeable batteries. After repeated use, the batteries will  
finally lose their ability to hold a charge and you will need to replace them.  
Under certain applicable laws and regulation, it may be illegal to dispose of old  
batteries by placing them in the trash.  
n
n
Please be kind to our shared environment. Check with your local government  
authority for details regarding where to recycle old batteries or how to dispose  
of them properly. This product contains mercury. Disposal of this material  
may be regulated due to environmental considerations. For disposal, reuse or  
recycling information, please contact your local government.  
If your hard disk or other storage media contains sensitive data, you should be  
aware that standard deletion procedures do not remove data from the media.  
These standard deletion procedures include:  
n
n
n
n
Selecting Delete for a target file  
Putting files in the Recycle Bin and emptying the Recycle Bin  
Reformatting the media  
Reinstalling an operating system from the recovery CD-ROM  
The procedures above delete only the initial part of the data used for file  
management. This makes the file invisible to the operating system, but the  
data can still be read by specialized utilities. If you dispose of the PC, please  
delete all the data on its hard disk drive. Doing so prevents unauthorized use  
of such data. To ensure your data is not used for unauthorized purposes, you  
can:  
n
n
n
Physically destroy the hard disk drive  
Use a proven specialized utility to overwrite all data  
Take the hard disk drive to a professional deletion service  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-7  
 
Troubleshooting  
Real Time Clock  
Problem  
Procedure  
The BIOS setting and  
system date/time are  
lost.  
Charge in the RTC battery is exhausted or getting  
low. You will need to set the date and time in the  
BIOS setup screen using the following procedure  
1. Press F2 key. BIOS setup will boot up.  
2. Set the date in System Date.  
3. Set the time in System Time.  
4. Press F10 key. Confirmation message will appear.  
5. Press Enter key. BIOS setup will terminate and  
the computer will be rebooted.  
After configuring the time and date for the Real Time Clock battery, we  
recommend that you turn the power status of your computer to “ON” so that  
the Real Time Clock battery is charged.  
Keyboard  
Keyboard problems can be caused by your setup configuration. For more  
information refer to Chapter 5, The Keyboard.  
Problem  
Procedure  
Some letter keys  
produce numbers  
Check that the numeric keypad overlay is not  
selected. Press Fn + F11 and try typing again.  
Output to screen is  
garbled  
Make sure the software you are using is not  
remapping the keyboard. Remapping involves  
reassigning the meaning of each key. Refer to your  
software’s documentation.  
If you are still unable to use the keyboard, consult  
your dealer.  
9-8  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
LCD panel  
Apparent LCD problems may be related to the computer’s setup.  
Problem  
Procedure  
No display  
Press hot keys Fn + F5 to change the display  
priority, to make sure it is not set for an external  
monitor.  
Problems above  
remain unresolved or  
other problems occur  
Refer to your software’s documentation to  
determine if the software is causing the difficulty.  
Run the diagnostic test.  
Contact your dealer if the problems continue.  
Hard disk drive  
Problem  
Procedure  
Computer does not  
boot from hard disk  
drive  
There may be a problem with your operating  
system files. Refer to your operating system  
documentation.  
Slow performance  
Your files may be fragmented. Run disk  
Defragmenter to check the condition of your  
files and disk. Refer to your operating system  
documentation or online help for information on  
running disk Defragmenter.  
As a last resort, reformat the hard disk. Then,  
reload the operating system and other files.  
If problems persist, contact your dealer.  
Solid State Drive  
Problem  
Procedure  
Computer does not  
boot from solid state  
drive  
There may be a problem with your operating  
system files. Refer to your operating system  
documentation.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-9  
 
Troubleshooting  
Recovery Discs  
Problem  
Procedure  
The following message  
You will see this message if you have previously  
appears when executing chosen to remove the partition and are trying to  
Recovery Disc Creator.  
create “Recovery Media”. When there is no recovery  
partition, the Recovery Disc Creator cannot make  
Recovery Media. However, if you have already  
created a “Recovery Media”, you can use it to restore  
the recovery partition.  
“The Recovery Disc  
Creator can not be  
launched because there  
is no recovery partition.”  
Simply follow the instructions in “Restoring the  
preinstall software from your creating Recovery  
Media” section in this manual. You will be directed  
to select “Restore Original Factory Image” from the  
drop-down menu. If you have not created “Recovery  
Media”, please contact TOSHIBA support for  
assistance.  
DVD Super Multi Double Layer drive  
For more information, refer to Chapter 4, Operating Basics.  
Problem  
Procedure  
You cannot access a  
CD/DVD in the drive  
Make sure the drive’s drawer is securely closed.  
Press gently until it clicks into place.  
Open the drawer and make sure the CD/DVD is  
properly seated. It should lie flat with the label facing  
up.  
A foreign object in the drawer could block laser light  
from reading the CD/DVD. Make sure there is no  
obstruction. Remove any foreign object.  
Check whether the CD/DVD is dirty. If it is, wipe  
it with a clean cloth dipped in water or a neutral  
cleaner. Refer to the Media care section in Chapter  
4, Operating Basics, for details on cleaning.  
9-10  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Problem  
Procedure  
Some CD/DVDs run The software or hardware configuration may  
correctly, but others  
do not.  
be causing a problem. Make sure the hardware  
configuration matches your software’s needs. Check  
the CD/DVD documentation.  
Check the type of CD/DVD you are using. The drive  
supports:  
DVD-ROM: DVD-ROM, DVD-Video  
CD-ROM:  
CD-DA, CD-Text, Photo  
CD (single/multi-session),  
CD-ROM Mode 1, Mode  
2, CD-ROM XA Mode 2  
(Form1, Form2), Enhanced  
CD (CD-EXTRA), Addressing  
Method 2  
n
DVD Super Multi Double Layer drive  
Recordable DVD-R/-R DL, DVD+R/+R  
DVD:  
DL, DVD-RW, DVD+RW,  
DVD-RAM  
Check the region code on the DVD. It must match  
that on the DVD Super Multi Double Layer drive.  
Region codes are listed in the Optical Disc Drive  
section in Chapter 2, The Grand Tour.  
Cannot write  
correctly  
If you have trouble writing, make sure you are  
observing the following precautions:  
Use only media recommended by TOSHIBA Do not  
use the mouse or keyboard during writing.  
Use only the software supplied with the computer for  
recording.  
Do not run or start other software during writing.  
Do not jar the computer during writing.  
Do not connect/disconnect external devices or install/  
remove internal cards during writing. If problems  
persist, contact your dealer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-11  
Troubleshooting  
USB floppy diskette drive  
For more information, refer to Chapter 8, Optional devices.  
Problem  
Procedure  
Drive does not operate  
Check the connection between the computer and the  
drive to ensure that it is properly attached.  
Some programs run  
correctly but others do  
not  
The computer’s software or hardware configuration  
may be causing a problem - ensure that these  
configurations match your requirements (refer to any  
relevant documentation, for example that supplied  
with any software in use, for further information).  
You cannot access the  
external floppy diskette  
drive  
Try another floppy diskette in the drive - if you are  
able to access this disk then it indicates the original  
disk and not the drive is probably causing the  
problem.  
If you are still unable to resolve the problem, contact  
your reseller, dealer or service provider.  
Memory card: Secure Digital (SD), Secure Digital  
High Capacity (SDHC), Memory Stick (MS),  
Memory Stick Pro (MS Pro), MultiMediaCard  
(MMC), and xD-Picture Card (xD)  
For more information, refer to Chapter 8, Optional devices.  
Problem  
Procedure  
Memory card error  
occurs  
Restart the memory card to make sure it is firmly  
connected.  
Check the card’s documentation.  
You cannot write to the  
Make sure the card is not write protected.  
memory card  
You cannot read a file  
Make sure the target file is on the memory card  
inserted in the slot.  
If problems persist, contact your dealer.  
9-12  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Pointing device  
If you are using a USB mouse, also refer to the USB section in this chapter and to  
your mouse documentation.  
TouchPad  
Problem  
Procedure  
On-screen pointer  
does not respond to  
Pad operation  
The system might be busy. If the pointer is  
shaped as an hourglass, wait for it to return to its  
normal shape and try again to move it.  
Double-tapping does  
not work  
Try changing the double-click speed setting in the  
mouse control utility.  
1. To access this utility, click  
, Control Panel,  
Hardware and Sound, then Mouse icon.  
2. Within the Mouse Properties window, click the  
Buttons tab.  
3. Set the double-click speed as required and  
click OK.  
The mouse pointer  
moves too fast or too  
slow  
Try changing the speed setting in the mouse  
control utility.  
1. To access this utility, click  
, Control Panel,  
Hardware and Sound, then Mouse icon.  
2. Within the Mouse Properties window, click the  
Pointer Options tab.  
3. Set the pointer speed as required and click OK.  
The response of  
the TouchPad is too  
sensitive  
Adjust the touch sensitivity.  
1. Click Start  
Control Panel  
Hardware  
and Sound  
Mouse icon.  
2. Within the Mouse Properties window, click the  
Advanced tab.  
3. Click the Advanced feature settings... button.  
4. Advanced feature settings is displayed.  
5. Within the Pointer speed and tapping settings,  
click Settings... button.  
6. Detailed TouchPad settings window is  
displayed.  
7. Move the slider bar to adjust the sensitivity in  
the Touch Sensitivity.  
8. Click the OK button.  
9. Click the OK button on Advanced feature  
setting screen.  
If you are still unable to resolve the problem,  
contact your reseller, dealer, or service provider.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-13  
 
Troubleshooting  
USB  
Also refer to your USB device’s documentation.  
Problem  
Procedure  
USB device does not  
work  
Check for a firm cable connection between the  
USB port on the computer and the USB device.  
Make sure the USB device drivers are properly  
installed. Refer to your Windows® Vista  
documentation for information on checking the  
drivers.  
If problems persist, contact your dealer.  
USB mouse  
Problem  
Procedure  
On-screen pointer  
does not respond to  
mouse operation  
The system might be busy. If the pointer is  
shaped as an hourglass, wait for it to resume its  
normal shape and try again to move it.  
Make sure the mouse is properly connected to the  
USB port.  
Double-clicking does  
not work  
Try changing the double-click speed setting in the  
mouse control utility.  
1. To access this utility, click  
, Control Panel,  
Hardware and Sound, then Mouse icon.  
2. Within the Mouse Properties window, click the  
Buttons tab.  
3. Set the double-click speed as required and  
click OK.  
The mouse pointer  
moves too fast or too  
slow  
Try changing the speed setting in the mouse  
control utility.  
1. To access this utility, click  
, Control Panel,  
Hardware and Sound, then Mouse icon.  
2. Within the Mouse Properties window, click the  
Pointer Options tab.  
3. Set the pointer speed as required and click OK.  
The mouse pointer  
moves erratically  
The mouse might be dirty. Refer to your mouse  
documentation for instructions on cleaning.  
If problems persist, contact your dealer.  
9-14  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
USB Sleep and Charge function  
Problem  
Procedure  
I cannot use the  
“USB Sleep and  
Charge function”.  
The setting of “USB Sleep and Charge function”  
may be [Disabled]. Change the setting to  
[Enabled] in the TOSHIBA USB Sleep and Charge  
utility..  
When there is a current overflow of the external  
device connected to the compatible port, USB  
bus power (DC5V) supply may be stopped for  
safety reasons. When this happens, disconnect  
an external device if some external devices  
are connected. After that, turn the power of the  
computer ON/OFF to restore the function. If this  
function can not be still used even if only one  
external device is connected, stop using the  
external device because its current is over the  
acceptable value of this computer.  
Some external devices may not be able to use the  
“USB Sleep and Charge function”. In this case,  
please try one or more of the following methods.  
n
n
n
Change a mode setting of [Enabled] by the  
BIOS Setup.  
Turn OFF the computer while external devices  
are connected.  
Connect external devices after turning OFF of  
the computer.  
If this function can not be still used, change the  
setting to [Disabled] in the BIOS Setup and stop  
using this function.  
The battery depletes  
quickly even when  
I turned OFF  
the power of the  
computer.  
When “USB Sleep and Charge function” is set  
to [Enabled] in the BIOS Setup, USB bus power  
(DC5V) will be supplied to the external device  
connected to the compatible port. If external  
device is connected to the compatible port when  
the AC adaptor is not connected to the computer,  
the battery of the computer will be depleted even  
when the power of the computer is turned OFF.  
Connect the AC adaptor to the computer or  
change the “USB Sleep and Charge function”  
setting to [Disabled] in the BIOS Setup.  
Instead use and USB port that does not have the  
USB Sleep and Charge function-compatible icon  
(
).  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-15  
 
Troubleshooting  
Problem  
Procedure  
External devices  
connected to the  
compatible ports  
do not work when  
connected to a  
Some external devices may not work when  
connected to a compatible port when the “USB  
Sleep and Charge function” is [Enabled] in the  
BIOS Setup.  
Reconnect the external device after turning ON  
the computer.  
compatible port.  
If the external device still doest not work, connect  
device to an USB port that does not have the USB  
Sleep and Charge function-compatible icon (  
or change the “USB Sleep and Charge function”  
setting to [Disabled] in the BIOS Setup.  
)
The “USB WakeUp  
function” does not  
work.  
When “USB Sleep and Charge function” is set to  
[Enabled] in the HW Setup, the “USB WakeUp  
function” does not work for ports that support the  
USB Sleep and Charge function.  
In that case, use an USB port that does not have  
the USB Sleep and Charge function-compatible  
icon ( ) or change the “USB Sleep and Charge  
function” setting to [Disabled] in the BIOS Setup.  
Memory expansion  
Refer also to Chapter 8, Optional Devices, for information on installing memory  
modules.  
Problem  
Procedure  
The computer hangs  
up  
Make sure the memory module installed in the  
expansion slot is compatible with the computer.  
If an incompatible module has been installed,  
follow the steps below.  
1. Turn off the power.  
2. Disconnect the AC adaptor and all peripheral  
devices.  
3. Remove the battery pack.  
4. Remove the memory module.  
5. Replace the battery pack and/or connect the  
AC adaptor.  
6. Turn on the power.  
If problems persist, contact your dealer.  
9-16  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Sound system  
Refer also to documentation for your audio devices.  
Problem  
Procedure  
No sound is heard  
Check the software volume settings.  
Make sure the headphone connection is secure.  
If problems persist, contact your dealer.  
External Monitor  
Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation.  
Problem  
Procedure  
Monitor does not  
turn on  
Make sure that the external monitor’s power  
switch is on. Confirm that the external monitor’s  
power cable is plugged into a working power  
outlet.  
No display  
Try adjusting the contrast and brightness controls  
on the external monitor.  
Press hot keys Fn + F5 to change the display  
priority and make sure it is not set for the internal  
display.  
Display error occurs  
Check that the cable connecting the external  
monitor to the computer is attached firmly.  
If problems persist, contact your dealer.  
Modem  
Problem  
Procedure  
Communication  
software can’t  
initialize modem  
Make sure the computer’s internal modem  
settings are correct. Refer to Phone and Modem  
Properties in the Control Panel.  
You can hear a dial  
tone but can’t make  
a call  
If the call is going through a PBX machine, make  
sure the communication application’s tone dial  
detection feature is disabled.  
You can also use the ATX command.  
You place a call, but  
a connection can’t  
be made  
Make sure the settings are correct in your  
communications application.  
After making a call  
you can’t hear a ring  
Make sure the tone or pulse selection in your  
communications application is set correctly.  
You can also use the ATD command.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-17  
 
Troubleshooting  
Problem  
Procedure  
Communication is  
cut off unexpectedly  
The computer will automatically cut off  
communication when connection with the carrier  
is not successful for a set time interval. Try  
lengthening this time interval.  
A CONNECT display  
is quickly replaced  
by NO CARRIER  
Check the error control setting in your  
communications application.  
You can also use the AT\N command.  
Character  
In data transmission, make sure the parity bit  
and stop bit settings correspond with those of the  
remote computer.  
display becomes  
garbled during a  
communication  
Check the flow control and communication  
protocol.  
You cannot receive  
an incoming call  
Check the rings before auto answer setting in  
your communications application.  
You can also use the ATS0 command.  
If problems persist, contact your dealer.  
LAN  
Problem  
Procedure  
Cannot access LAN  
Check for a firm cable connection between the  
LAN jack and the LAN hub.  
If problems persist, consult your LAN  
administrator.  
Wireless LAN  
If the following procedures do not restore LAN access, consult your LAN  
administrator. For more information on wireless communication, refer to Chapter  
Problem  
Procedure  
Cannot access  
Wireless LAN  
Make sure the computer’s wireless  
communication switch is set to on.  
If problems persist, contact your LAN  
administrator.  
The Wireless LAN feature is not available on all models.  
9-18  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Fingerprint Sensor  
Problem  
Procedure  
Reading of the  
fingerprint was not  
successful  
Please try again using the correct posture. Refer  
Try the recognition process again using another  
enrolled finger.  
The fingerprint  
cannot be read due  
to injuries to the  
finger  
Try the recognition process again using another  
enrolled finger.  
If fingerprints from all the enrolled fingers cannot  
be read, please logon by using the keyboard to  
input the password for the time being.  
If problems persist, contact your dealer.  
Fingerprint Pre-OS  
feature or Single  
Sign On feature  
Please use TOSHIBA HW Setup to register the  
User Password if it was not registered.  
cannot be enabled  
Fingerprint Pre-OS  
feature does not  
work  
Make sure you have enroll finger in windows  
account.  
Set the User Password by using TOSHIBA HW  
Setup and restart the system.  
Make sure place a checkmark in “Enable Pre-OS  
Fingerprint Authentication” on the TrueSuite  
Access Manager setting.  
ExpressCard  
Refer also to Chapter 8, Optional Devices.  
Problem  
Procedure  
ExpressCard error  
occurs  
Reseat the ExpressCard to make sure it is firmly  
connected.  
Make sure the connection between the external  
device and the card is firm.  
Check the card’s documentation.  
If problems persist, contact your dealer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-19  
 
Troubleshooting  
TOSHIBA support  
If you require any additional help using your computer or if you are having  
problems operating the computer, you may need to contact TOSHIBA for  
additional technical assistance.  
Before you call  
Some problems you experience may be related to software or the operating  
system, it is important to investigate other sources of assistance first. Before  
contacting TOSHIBA, try the following:  
n
n
Review troubleshooting sections in the documentation for software and  
peripheral devices.  
If a problem occurs when you are running software applications, consult the  
software documentation for troubleshooting suggestions. Call the software  
company’s technical support for assistance.  
n
Consult the dealer you purchased your computer and/or software from. They  
are your best sources for current information and support.  
Where to write  
If you are still unable to solve the problem and suspect that it is hardware related,  
write to TOSHIBA at the nearest location listed on the below.  
Outside of Europe  
Australia  
In Europe  
Germany & Austria  
TOSHIBA Australia Pty. Ltd.  
Information Systems Division  
84-92 Talavera Road  
TOSHIBA Europe (I.E.) GmbH  
Geschäftsbereich, Deutschland-  
Österreich  
North Ryde N.S.W. 2113 Sydney  
Hammfelddamm8,  
D-41460 Neuss, Germany  
Canada  
France  
TOSHIBA of Canada Ltd.  
191 McNabb Street,  
Markham, Ontario  
L3R 8H2  
TOSHIBA Systèms France S.A.  
7, Rue Ampère B.P. 131,  
92804 Puteaux Cedex  
China  
Netherlands  
TOSHIBA Personal Computer &  
Network (Shanghai) Co. Ltd.  
10F, BEA Finance Tower,  
No. 66 Hua Yuan Shi Qiao Road,  
Pudong, Shanghai  
TOSHIBA Information Systems,  
Benelux B.V.  
Rivium Boulevard  
41 2909 LK Capelle a/d IJssel  
People’s Republic of China  
200120  
9-20  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Outside of Europe  
Singapore  
In Europe  
Spain  
TOSHIBA Singapore Pte. Ltd.  
438B Alexandra Road #06-01  
Alexandra Technopark  
TOSHIBA Information Systems,  
ESPAÑA  
Parque Empresarial San Fernando  
Edificio Europa, la Planta,  
Escalera A 28830 Madrid  
Singapore 119968  
United States of America  
United Kingdom  
TOSHIBA America Information  
Systems, Inc.  
9740 Irvine Boulevard  
Irvine, California 92618  
USA  
TOSHIBA Information Systems  
(U.K.) Ltd.  
TOSHIBA Court  
Weybridge Business Park  
Addlestone Road  
Weybridge, Surrey KT15 2UL  
India  
The Rest of Europe  
TOSHIBA India Pvt Ltd.  
PC Division  
6th Floor, DR Gopal Das Bhawan  
Barakhamba Road, Delhi-110001,  
India  
TOSHIBA Europe (I.E.) GmbH  
Geschäftsbereich,  
Deutschland-Österreich  
Hammfelddamm 8,  
D-41460 Neuss, Germany  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-21  
Troubleshooting  
9-22  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Appendix A  
Specifications  
This appendix summarizes the computer’s technical specifications.  
Environmental Requirements  
Conditions  
Operating  
Ambient temperature  
Relative humidity  
5°C (41°F) to 35°C (95°F)  
20% to 80%  
(noncondensing)  
Non-operating  
-20°C (-4°F) to 65°C (149°F) 10% to 90%  
(noncondensing)  
Wet-bulb  
26°C maximum  
temperature  
Conditions  
Operating  
Altitude (from sea level)  
0 to 3,000 meters  
Non-operating  
0 to 10,000 meters maximum  
Power Requirements  
AC adaptor  
Computer  
100-240 volts AC  
50 or 60 hertz (cycles per second)  
19 V DC  
Built-in Modem  
This information is applicable to the models equipped with a built-in modem.  
Network control unit (NCU)  
Type of NCU  
Type of line  
AA  
Telephone line (analog only)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A-1  
 
Specifications  
Type of dialling  
Pulse  
Tone  
Control command  
Monitor function  
AT commands  
EIA-578 commands  
Computer’s speaker  
Communication specifications  
Communication  
System  
Data: Full duplex  
Fax: Half duplex  
Communication  
protocol  
Data  
V.21/V.22/V.22bis/V.32/  
V.32bis/V.34/V.90/V.92  
103/212A  
ITU-T-Rec  
(Former CCITT)  
Bell  
Fax:  
ITU-T-Rec  
(Former CCITT)  
V.17/V.29/V.27ter/V.21 ch2  
Communication Speed Data transmission and reception  
300/1200/2400/4800/7200/9600/12000/14400/  
16800/19200/21600/24000/26400/28800/31200/  
33600 bps  
Data reception only with V.90  
28000/29333/30666/32000/33333/34666/36000/  
37333/38666/40000/41333/42666/44000/45333/  
46666/48000/49333/50666/52000/53333/54666/  
56000 bps  
Fax  
2400/4800/7200/9600/12000/14400 bps  
Transmitting level  
Receiving level  
-10 dBm  
-10 to -40 dBm  
600 ohms ±30%  
Input/output  
impedance  
Error correcting  
Data compression  
Power supply  
MNP class 4 and ITU-T V.42  
MNP class 5 and ITU-T V.42bis  
+3.3V (supplied by computer)  
A-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Appendix B  
Display Controller  
Display Controller  
The display controller interprets software commands into hardware commands  
that turn particular pels on or off.  
The controller is an advanced Video Graphics Array (VGA) that provides Super  
VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD  
and external monitors.  
A high-resolution external monitor connected to the computer can display up to  
2048 horizontal and 1536 vertical pixels at up to 16M colors.  
The display controller also controls the video mode, which uses industry standard  
rules to govern the screen resolution and the maximum number of colors that can  
be displayed on screen.  
Software written for a given video mode will run on any computer that supports the  
mode.  
The computer’s display controller supports all SVGA and XGA modes, the most  
widely used industry standards.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B-1  
 
Display Controller  
B-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C  
Wireless LAN  
Card Specifications  
Form Factor  
Compatibility  
PCI Express Mini Card  
n
n
IEEE 802.11 Standard for Wireless LANs  
Wi-Fi (Wireless Fidelity) certified by the Wi-Fi  
Alliance.  
The “Wi-Fi CERTIFIED” logo is a certification  
mark of the Wi-Fi Alliance.  
Network Operating  
System  
n
n
Microsoft® Windows® Networking  
Media Access  
Protocol  
CSMA/CA (Collision Avoidance) with  
Acknowledgement (ACK)  
Data Rate  
n
n
54/48/36/24/18/12/9/6 Mb/s (IEEE 802.11a/g)  
11/5.5/2/1 Mb/s (IEEE 802.11 b)  
The Wireless LAN feature is not available on all models.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C-1  
 
Wireless LAN  
Radio Characteristics  
Radio Characteristics of Wireless LAN Cards may vary according to:  
n
n
Country/region where the product was purchased  
Type of product  
Wireless communication is often subject to local radio regulations. Although  
Wireless LAN wireless networking products have been designed for operation in  
the license-free 2.4GHz and 5GHz band, local radio regulations may impose a  
number of limitations to the use of wireless communication equipment.  
Refer to the sheet “Information to the User” for regulatory information that may  
apply in your country/region.  
R-F Frequency  
n
n
n
n
Band 2.4GHz (2400~2497 MHz) for  
802.11b/g/n (draft version)  
Band gGHz (5150~5850 MHz) for  
802.11a/n (draft version)  
Modulation  
Technique  
DSSS-CCK, DSSS-DQPSK, DSSS-DBPSK  
(IEEE 802.11b)  
OFDM-BPSK, OFDM-QPSK, OFDM-  
16QAMOFDM-16QAM (IEEE 802.11a/g)  
The range of the wireless signal is related to the transmit rate of the wireless  
communication device. Communications at a lower transmission rate may travel  
larger distances.  
n
n
The range of your wireless devices can be affected when the antennas are  
placed near metal surfaces and solid high-density materials.  
Range is also impacted due to “obstacles” in the path of the transmission that  
may either absorb or reflect the radio signal.  
C-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless LAN  
Supported Frequency Sub-bands  
Subject to the radio regulations that apply in the countries/regions, your Wireless  
LAN card may support a different set of 2.4 GHz channels. Consult your  
Authorized Wireless LAN or TOSHIBA Sales office for information about the radio  
regulations that apply in the countries/regions.  
Wireless IEEE 802.11 Channels Sets (Revision B,  
G and draft N)  
Frequency Range  
Channel ID  
2400-2483.5 MHz  
1
2412  
2417  
2422  
2427  
2432  
2437  
2442  
2447  
2452  
2457  
2462  
2467*1  
2472*1  
2
3
4
5
6
7
8
9
10  
11  
12  
13  
*1  
Refer to the sheet Approved Countries/Regions for use for the countries/regions  
that in which these channels can be used.  
When installing Wireless LAN cards, the channel configuration is managed as  
follows:  
n
For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless  
LAN card will automatically start operation at the channel identified by the  
Wireless LAN Access Point. When roaming between different access points  
the station can dynamically switch to another channel if required.  
n
In a Wireless LAN Access Point, the Wireless LAN card will use the factory-  
set default channel (printed in bold), unless the LAN Administrator selected a  
different channel when configuring the Wireless LAN Access Point device.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C-3  
Wireless LAN  
C-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D  
AC Power Cord and Connectors  
The power cord’s AC input plug must be compatible with the various international  
AC power outlets and the cord must meet the standards for the country/region in  
which it is used. All cords must meet the following specifications:  
Length:  
Minimum 1.7 meters  
Minimum 0.75 mm2  
Minimum 2.5 amperes  
Wire size:  
Current rating:  
Voltage rating:  
125 or 250 VAC (depending on country/region’s  
power standards)  
Certification agencies  
U.S. and Canada:  
UL listed and CSA certified  
No. 18 AWG, Type SVT or SPT-2 two conductor  
Australia:  
Japan:  
AS  
DENANHO  
Europe:  
Austria:  
Belgium:  
Denmark:  
Finland:  
France:  
OVE  
Italy:  
IMQ  
CEBEC  
DEMKO  
SETI  
The Netherlands:  
Norway:  
KEMA  
NEMKO  
SEMKO  
SEV  
Sweden:  
UTE  
Switzerland:  
United Kingdom:  
Germany:  
VDE  
BSI  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-1  
 
AC Power Cord and Connectors  
In Europe, power cords must be VDE type, H05VVH2-F and two conductor.  
For the United States and Canada, plug configuration must be a 2-15P (250 V) or  
1-15P (125 V) as designated in the U.S. National Electrical code handbook and  
the Canadian Electrical Code Part II.  
The following illustrations show the plug shapes for the U.S.A. and Canada, the  
United Kingdom, Australia and Europe.  
USA and Canada  
United Kingdom  
UL approved  
CSA approved  
BS approved  
Australia  
Europe  
Approved by the appropriate  
agency  
AS approved  
D-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Appendix E  
TOSHIBA PC Health Monitor  
The TOSHIBA PC Health Monitor software program monitors computer system  
functions such as power consumption, the cooling system and HDD/SSD Alert.  
It alerts users of specific system conditions via pop-up messages. It also tracks  
the usage of the computer and related devices, logging the service relevant  
information on the computer’s hard disk drive.  
n
The collected information includes device operation time and number of  
actuations or status changes (i.e.: number of power button and Fn key  
combination uses, AC adaptor, battery, LCD, fan, HDD, sound volume,  
wireless communication switch, TOSHIBA Express Port Replicator and USB  
information), date of initial system use, and also computer and device usage  
(i.e.: power settings, battery temperature and recharging, CPU, memory,  
backlight illumination time, and temperatures for various devices), property  
(e.g., product name, model number, part number, serial number, BIOS  
version, FW version) of the system and components (e.g., Video device,  
Sound device, Network device, Hard Disk drive, Solid State drive, Optical Disc  
drive), operating system and software information (e.g., OS version, OS install  
date, Direct X version, Internet Explorer version, installed update program and  
driver lists). The stored data uses a very small portion of the total hard disk  
capacity, approximately 10MB or less per year.  
n
This information is used to identify and provide a notification of system  
conditions which may effect the performance of your Toshiba computer. It may  
also be used to help diagnose problems should the computer require service  
by Toshiba or Toshiba’s authorized service providers. Additionally, Toshiba  
may also use this information for quality assurance analysis. Subject to the  
use restrictions above, the HDD data logged may be transferred to entities  
located outside of your country or region of residence (e.g., European Union).  
Those countries may or may not have the same data protection laws or data  
protection levels as required by your home country or region.  
n
n
Once enabled, you may disable the TOSHIBA PC Health Monitor at any time  
by uninstalling the software via Uninstall a program in the Control Panel.  
Doing so will automatically delete all collected information from the HDD.  
The TOSHIBA PC Health Monitor software does not extend or modify  
Toshiba’s obligations under its standard limited warranty in any way. Toshiba’s  
standard limited warranty terms and limitations apply.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E-1  
 
TOSHIBA PC Health Monitor  
Starting the TOSHIBA PC Health Monitor  
The TOSHIBA PC Health Monitor can be started using the following methods:  
n
n
Double click TOSHIBA PC Health Monitor in the Welcome Center.  
Click Start  
All Programs  
TOSHIBA  
Utilities  
PC Health  
Monitor.  
n
Click the icon in the notification area, then click the “TOSHIBA PC Health  
Monitor is not enabled. Please click here for more details.” message  
when it is displayed. (*)  
No matter which method is used, the TOSHIBA PC Health Monitor explanation  
screen will be displayed.  
Clicking “Next” will display the “TOSHIBA PC Health Monitor Software Notice &  
Acceptance” screen. Please carefully read the information displayed. Selecting  
Accept” and clicking “OK” will enable the program. By enabling the TOSHIBA  
PC Health Monitor software, you agree with these terms and conditions and to  
the use and sharing of the collected information. Once the program is enabled,  
the TOSHIBA PC Health Monitor screen is displayed, and the program will begin  
monitoring system functions and collecting information.  
(*) This message will no longer be displayed after clicking “Enable this software  
program now” or “Disable this software program now” on the “TOSHIBA PC Health  
Monitor Software Notice & Acceptance” screen.  
If a TOSHIBA PC Health Monitor message is displayed  
A message will be displayed if any changes which may interfere with the operation  
of the program are detected. If the following special message is displayed, carry  
out the procedures listed below.  
If the “It is possible that the PC cooling performance has decreased. Please  
click [OK] to run the TOSHIBA Colling Performance Diagnostic Tool to check the  
cooling performance of your PC“, message is displayed.  
1. Click “OK” to start the “TOSHIBA Cooling Performance Diagnostic Tool”.  
2. It is possible that the PC cooling performance has decreased. We strongly  
recommend you have your PC checked by a Toshiba Authorized Service  
Provider.  
If you must use the PC for a short period of time before taking it to the Toshiba  
Authorized Service Provider, we recommend you change the cooling method  
setting.  
E-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA PC Health Monitor  
Click Start  
Change advanced power settings  
Cooling Method Battery Optimized.  
Control Panel  
Power Options  
Change plan settings  
TOSHIBA Power Saver Settings  
This PC Cooling Performance Diagnostic Tool does not in any way expand  
or modify Toshiba’s obligations under its standard limited warranty. Toshiba’s  
standard limited warranty terms and limitations apply.  
* If another message is displayed, follow the instructions displayed on screen.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E-3  
TOSHIBA PC Health Monitor  
E-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Appendix F  
Legal Footnotes  
This chapter states the Legal Footnotes information applicable to TOSHIBA  
computers. In the text in this manual, *XX is used to show which Legal Footnotes  
description is related to TOSHIBA computers. Description(s) related to this  
computer are marked with a blue *XX in this manual. Clicking on *XX will display  
the related description.  
CPU  
Central Processing Unit (“CPU”) Performance Legal Footnotes. CPU performance  
in your computer product may vary from specifications under the following  
conditions:  
n
n
n
n
n
use of certain external peripheral products  
use of battery power instead of AC power  
use of certain multimedia, computer generated graphics or video applications  
use of standard telephone lines or low speed network connections  
use of complex modeling software, such as high end computer aided design  
applications  
n
n
use of several applications or functionalities simultaneously  
use of computer in areas with low air pressure (high altitude >1,000 meters or  
>3,280 feet above sea level)  
n
use of computer at temperatures outside the range of 5°C to 30°C (41°F  
to 86°F) or >25°C (77°F) at high altitude (all temperature references are  
approximate and may vary depending on the specific computer model - please  
refer to your computer documentation or visit the TOSHIBA website at  
CPU performance may also vary from specifications due to design configuration.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F-1  
 
Legal Footnotes  
Under some conditions, your computer product may automatically shutdown.  
This is a normal protective feature designed to reduce the risk of lost data or  
damage to the product when used outside recommended conditions. To avoid  
risk of lost data, always make back-up copies of data by periodically storing it  
on an external storage medium. For optimum performance, use your computer  
product only under recommended conditions. Read additional restrictions in your  
product documentation. Contact TOSHIBA technical service and support, refer to  
TOSHIBA support section in Chapter 9, Troubleshooting for more information.  
64-Bit Computing.  
64-bit processors are designed to take advantage of 32 and 64 bit computing.  
64-bit computing requires that the following hardware and software requirements  
are met:  
n
n
n
n
64-bit Operating System  
64-bit CPU, Chipset and BIOS (Basic Input/Output System)  
64-bit Device drivers  
64-bit applications  
Certain device drivers and/or applications may not be compatible with a 64- bit  
CPU and therefore may not function properly. A 32-bit version of the operating  
system is preinstalled on your computer unless explicitly stated that the operating  
system is 64-bit.  
Memory (Main System)  
Part of the main system memory may be used by the graphics system for graphics  
performance and therefore reduce the amount of main system memory available  
for other computing activities. The amount of main system memory allocated  
to support graphics may vary depending on the graphics system, applications  
utilized, system memory size and other factors. For computer’s configured with 4  
GB of system memory, the full system memory space for computing activities will  
be considerably less and will vary by model and system configuration.  
Battery Life  
Battery life may vary considerably depending on product model, configuration,  
applications, power management settings and features utilized, as well as the  
natural performance variations produced by the design of individual components.  
Published battery life numbers are achieved on select models and configurations  
tested by TOSHIBA at the time of publication. Recharge time varies depending on  
usage. Battery may not charge while computer is consuming full power.  
After going through many charge and discharge cycles, the battery will lose its  
ability to perform at maximum capacity and will need to be replaced. This is a  
normal phenomenon for all batteries. To purchase a new battery pack, see the  
accessories information that is shipped with your computer.  
F-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Legal Footnotes  
Hard Disk Drive (HDD) Capacity  
1 Gigabyte (GB) means 109 = 1,000,000,000 bytes using powers of 10. The  
computer operating system, however, reports storage capacity using powers of  
2 for the definition of 1 GB = 230 = 1,073,741,824 bytes, and therefore shows  
less storage capacity. Available storage capacity will also be less if the product  
includes one or more pre-installed operating systems, such as Microsoft Windows  
and/or pre-installed software applications, or media content. Actual formatted  
capacity may vary.  
LCD  
Over a period of time, and depending on the usage of the computer, the  
brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of  
LCD technology.  
Maximum brightness is only available when operating in AC power mode. The  
screen will dim when the computer is operated on battery power and you may not  
be able to increase the brightness of the screen.  
Graphics Processor Unit (“GPU”)  
Graphics processor unit (“GPU”) performance may vary depending on product  
model, design configuration, applications, power management settings and  
features utilized. GPU performance is only optimized when operating in AC power  
mode and may decrease considerably when operating in battery power mode.  
Total Available Graphics Memory is the total of, as applicable, Dedicated Video  
Memory, System Video Memory and Shared System Memory. Shared System  
Memory will vary depending on system memory size and other factors.  
Wireless LAN  
The transmission speed over the wireless LAN and the distance over which  
wireless LAN can reach may vary depending on surrounding electromagnetic  
environment, obstacles, access point design and configuration, and client design  
and software/hardware configurations. The actual transmission speed will be  
lower than the theoretical maximum speed.  
The wireless adapter is based on a draft 2.0 release version of the IEEE 802.11n  
specification and; may not be full compatible with, or support some feature (e.g.,  
security) of, certain Wi-Fi equipment.  
Copy Protection  
Applicable copy protection standards included in certain media may prevent or  
limit recording or viewing of the media.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F-3  
Legal Footnotes  
Images  
All images are simulated for purposes of illustration.  
Non-applicable Icons  
Certain computer chassis are designed to accommodate all possible  
configurations for an entire product series. Therefore, please be aware that your  
selected model may not have all the features and specifications corresponding to  
all of the icons or switches shown on the computer chassis.  
USB Sleep & Charge  
The “USB Sleep & Charge function” may not work with certain external devices  
even if they are compliant with the USB specification. In those cases, turn the  
power of the computer ON to charge the device.  
F-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Glossary  
The terms in this glossary cover topics related to this manual. Alternate naming is  
included for reference.  
Abbreviations  
AC: Alternating current  
ACPI: Advanced Configuration and Power Interface  
AMT: Intel Active Management Technology  
ASCII: American Standard Code for Information Interchange  
BIOS: basic input/output system  
bps: bits per second  
CD: compact disc  
CD-ROM: Compact Disc Read-Only Memory  
CD-RW: Compact Disc-ReWritable  
CMOS: complementary metal-oxide semiconductor  
CPU: central processing unit  
CRT: cathode ray tube  
DC: direct current  
DDC: display data channel  
DDR: double data rate  
DIMM: dual inline memory module  
DVD: digital versatile disc  
DVD-R: Digital Versatile Disc-Recordable  
DVD-RAM: Digital Versatile Disc-Random Access Memory  
DVD-R (Dual Layer): Digital Versatile Disc Recordable Dual Layer  
DVD-ROM: Digital Versatile Disc-Read Only Memory  
DVD-RW: Digital Versatile Disc-ReWritable  
DVD+R (Double Layer): Digital Versatile Disc Recordable Double Layer  
FDD: floppy diskette drive  
GB: gigabyte  
HDD: hard disk drive  
HDCP: high-bandwidth digital content protection  
User’s Manual  
Glossary-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Glossary  
HDMI: high definition multimedia interface  
HDMI-CEC: high definition multimedia interface consumer electronics control  
IDE: integrated drive electronics  
IEEE: Institute of Electrical and Electronics Engineers  
IMSM: Intel Matrix Storage Manager  
I/O: input/output  
KB: kilobyte  
LAN: local area network  
LCD: liquid crystal display  
LED: light emitting diode  
MB: megabyte  
MMC: multi media card  
OCR: optical character recognition (reader)  
PC: personal computer  
PCI: peripheral component interconnect  
RAM: random access memory  
RGB: red, green, and blue  
ROM: read only memory  
RTC: real time clock  
S/P DIF: Sony/Philips Digital Interface Format  
SDRAM: synchronous dynamic random access memory  
SLI: Scalable Link Interface  
SO-DIMM: small-outline dual in line memory module  
SSD: Solid state drive  
TFT: thin-film transistor  
USB: Universal Serial Bus  
UXGA: ultra extended graphics array  
VGA: video graphics array  
WAN: wide area network  
WSXGA: wide super extended graphics array  
WSXGA+: wide super extended graphics array plus  
WUXGA: Wide Ultra Extended Graphics Array  
WXGA: wide extended graphics array  
WXGA+: wide extended graphics array plus  
XGA: extended graphics array  
A
adaptor: A device that provides a compatible connection between two units. For  
example, the computer’s internal display adapter receives information from  
the software and translates it into images on the screen. An adapter can take  
a number of forms, from a microprocessor to a simple connector: An intelligent  
adapter (one that is capable of doing some processing) may also be called a  
controller.  
alphanumeric: Keyboard characters including letters, numbers and other  
symbols, such as punctuation marks or mathematical symbols.  
Glossary-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
alternating current (AC): Electric current that reverses its direction of flow at  
regular intervals.  
analog signal: A signal whose characteristics such as amplitude and frequency  
vary in proportion to (are an analog of) the value to be transmitted. Voice  
communications are analog signals.  
application: A group of programs that together are used for a specific task such  
as accounting, financial planning, spreadsheets, word processing and games.  
ASCII: American Standard Code for Information Interchange. ASCII code is a set  
of 256 binary codes that represent the most commonly used letters, numbers,  
and symbols.  
B
backup: A copy of a file, usually on a removable disk, kept in case the original file  
is lost or damaged.  
binary: The base two number system composed of zeros and ones (off or on),  
used by most digital computers. The right-most digit of a binary number has  
a value of 1, the next a value of 2, then 4, 8, 16, and so on. For example, the  
binary number 101 has a value of 5. See also ASCII.  
BIOS: Basic Input/Output System. The firmware that controls data flow within the  
computer. See also firmware.  
bit: Derived from “binary digit”, the basic unit of information used by the computer.  
It is either zero or one. Eight bits is one byte. See also byte.  
Bluetooth: A short-range radio technology designed to simplify wireless  
communication among computers, communication devices and the Internet.  
board: A circuit board. An internal card containing electronic components, called  
chips, which perform a specific function or increase the capabilities of the  
system.  
boot: Short for bootstrap. A program that starts or restarts the computer. The  
program reads instructions from a storage device into the computer’s memory.  
boot disk: See system disk.  
bootable disk: See system disk.  
bps: Bits per second. Typically used to describe the data transmission speed of a  
modem.  
buffer: The portion of the computer’s memory where data is temporarily stored.  
Buffers often compensate for differences in the rate of flow from one device to  
another.  
User’s Manual  
Glossary-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
bus: An interface for transmission of signals, data or electric power.  
byte: The representation of a single character. A sequence of eight bits treated as  
a single unit; also the smallest addressable unit within the system.  
C
cache memory: A section of very fast memory in which frequently used  
information is duplicated for quick access. Accessing data from cache is faster  
than accessing it from the computer’s main memory. See also L1 cache, L2  
cache.  
capacity: The amount of data that can be stored on a magnetic storage device  
such as a floppy diskette or hard disk drive. It is usually described in terms of  
kilobytes (KB), where one KB = 1024 bytes, megabytes (MB), where one MB  
= 1024 KB and gigabytes (GB), where one GB = 1024 MB.  
CardBus: An industry standard bus for 32-bit PC Cards.  
CD: An individual compact disc. See also CD-ROM.  
CD-R: A Compact Disc-Recordable disc can be written once and read many  
times. See also CD-ROM.  
CD-ROM: A Compact Disc Read-Only Memory is a high capacity disc that can  
be read from but not written to. The CD-ROM drive uses a laser, rather than  
magnetic heads, to read data from the disc.  
CD-RW: A Compact Disc-ReWritable disc can be rewritten many times. See also  
CD-ROM.  
character: Any letter, number, punctuation mark, or symbol used by the computer.  
Also synonymous with byte.  
chassis: The frame containing the computer.  
chip: A small semiconductor containing computer logic and circuitry for  
processing, memory, input/output functions and controlling other chips.  
Click: To press and release the pointing device’s primary button without moving  
the pointing device. In the Windows® operating system, this refers to the  
pointing device’s left button, unless otherwise stated. See also double-click.  
CMOS: Complementary Metal-Oxide Semiconductor. An electronic circuit  
fabricated on a silicon wafer that requires very little power. Integrated circuits  
implemented in CMOS technology can be tightly packaged and are highly  
reliable.  
cold start: Starting a computer that is currently off (turning on the power).  
COM1, COM2, COM3 and COM4: The names assigned to the serial and  
communication ports.  
commands: Instructions you enter at the terminal keyboard that direct the actions  
of the computer or its peripheral devices.  
Glossary-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
compatibility: 1) The ability of one computer to accept and process data in the  
same manner as another computer without modifying the data or the media  
upon which it is being transferred. 2) the ability of one device to connect to or  
communicate with another system or component.  
components: Elements or parts (of a system) which make up the whole (system).  
computer program: A set of instructions written for a computer that enable it to  
achieve a desired result.  
computer system: A combination of hardware, software, firmware, and peripheral  
components assembled to process data into useful information.  
configuration: The specific components in your system (such as the terminal,  
printer, and disk drives) and the settings that define how your system works.  
You use the HW Setup program to control your system configuration.  
controller: Built-in hardware and software that controls the functions of a specific  
internal or peripheral device (e.g. keyboard controller).  
CPU: Central Processing Unit. The portion of the computer that interprets and  
executes instructions.  
CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a  
fluorescent screen-producing luminous spots. An example is the television set.  
cursor: A small, blinking rectangle or line that indicates the current position on the  
display screen.  
D
data: Information that is factual, measurable or statistical that a computer can  
process, store, or retrieve.  
data bits: A data communications parameter controlling the number of bits (binary  
digits) used to make up a byte. If data bits = 7 the computer can generate  
128 unique characters. If data bits = 8 the computer can generate 256 unique  
characters.  
DC: Direct Current. Electric current that flows in one direction. This type of power  
is usually supplied by batteries.  
default: The parameter value automatically selected by the system when you or  
the program do not provide instructions. Also called a preset value.  
delete: To remove data from a disk or other data storage device. Synonymous  
with erase.  
device driver: A program (called a “driver”) that permits a computer to  
communicate with a device.  
dialog box: A window that accepts user input to make system settings or record  
other information.  
disable: To turn a computer option off. See also enable.  
User’s Manual  
Glossary-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
disk drive: The device that randomly accesses information on a disk and copies  
it to the computer’s memory. It also writes data from memory to the disk. To  
accomplish these tasks, the unit physically rotates the disk at high speed past  
a read-write head.  
disk storage: Storing data on magnetic disk. Data is arranged on concentric  
tracks much like a phonograph record.  
display: A CRT, LCD, or other image producing device used to view computer  
output.  
documentation: The set of manuals and/or other instructions written for the  
users of a computer system or application. Computer system documentation  
typically includes procedural and tutorial information as well as system  
functions.  
double click: To press and release the pointing device’s primary button rapidly  
twice without moving the pointing device. In the Windows® operating system,  
this refers to the pointing device’s left button, unless otherwise stated.  
driver: A software program, generally part of the operating system, that controls a  
specific piece of hardware (frequently a peripheral device such as a printer or  
mouse).  
DVD: An individual digital versatile (or video) disc. See also DVD-ROM.  
DVD-R (+R, -R): A Digital Versatile Disc-Recordable disk can be written once and  
read many times. The DVD-R drive uses a laser to read data from the disc.  
DVD-RAM: A Digital Versatile Disc-Random Access Memory is a high capacity,  
high performance disc that lets you store large volumes of data. The DVD-  
ROM drive uses a laser to read data from the disc.  
DVD-ROM: A Digital Versatile Disc-Read Only Memory is a high capacity, high  
performance disc suitable for play back of video and other high-density files.  
The DVD-ROM drive uses a laser to read data from the disc.  
DVD-RW (+RW, -RW): A Digital Versatile Disc-ReWritable disc can be rewritten  
many times.  
E
echo: To send back a reflection of the transmitted data to the sending device.  
You can display the information on the screen, or output it to the printer, or  
both. When a computer receives back data it transmitted to a CRT (or other  
peripheral device) and then transmits the data to printer, the printer is said to  
echo the CRT.  
enable: To turn on a computer option. See also disable.  
erase: See delete.  
escape: 1) A code (ASCII code 27), signaling the computer that what follows are  
commands; used with peripheral devices such as printers and modems.  
2) A means of aborting the task currently in progress.  
Glossary-6  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
escape guard time: A time before and after an escape code is sent to the modem  
which distinguishes between escapes that are part of the transmitted data,  
and escapes that are intended as a command to the modem.  
execute: To interpret and execute an instruction.  
F
file: A collection of related information; a file can contain data, programs, or both.  
fingerprint sensor: The fingerprint sensor compares and analyzes the unique  
characteristics in a fingerprint.  
firmware: A set of instructions built into the hardware which controls and directs a  
microprocessor’s activities.  
flash memory: Non-volatile memory that can be written to as well as read.  
Information in flash memory remains whether or not the computer is receiving  
power. This type of memory is used to retain your  
fingerprint data: See also memory. Compare RAM and ROM.  
floppy diskette: A removable disk that stores magnetically encoded data.  
floppy diskette drive (FDD): An electromechanical device that reads and writes  
to floppy diskettes.  
folder: An icon in Windows used to store documents or other folders.  
format: The process of readying a blank disk for its first use. Formatting  
establishes the structure of the disk that the operating system expects before  
it writes files or programs onto the disk.  
function keys: The keys labeled F1 through F12 that tell the computer to perform  
certain functions.  
G
gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also  
megabyte.  
graphics: Drawings, pictures, or other images, such as charts or graphs, to  
present information.  
H
hard disk: A storage device composed of a rigid platter or platters that can be  
magnetically coded with data. Hard disks hold much more information than  
diskettes and are used for long-term storage of programs and data. The  
primary (or only) hard disk in a computer is usually fixed, but some computers  
have secondary hard disks that are removable. By default, the hard disk is  
referred to as drive C.  
User’s Manual  
Glossary-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
hard disk drive (HDD): An electromechanical device that reads and writes a hard  
disk. See also hard disk.  
hardware: The physical electronic and mechanical components of a computer  
system: typically, the computer itself, external disk drives, etc. See also  
software and firmware.  
hertz: A unit of wave frequency that equals one cycle per second.  
host computer: The computer that controls, regulates, and transmits information  
to a device or another computer.  
hot key: The computer’s feature in which certain keys in combination with the  
extended function key, FN, can be used to set system parameters, such as  
speaker volume.  
HW Setup: A TOSHIBA utility that lets you set the parameters for various  
hardware components.  
I
icon: A small graphic image displayed on the screen or in the indicator panel. In  
Windows, an icon represents an object that the user can manipulate.  
input: The data or instructions you provide to a computer, communication device  
or other peripheral device from the keyboard or external or internal storage  
devices. The data sent (or output) by the sending computer is input for the  
receiving computer.  
instruction: Statements or commands that specify how to perform a particular  
task.  
interface: 1) Hardware and/or software components of a system used specifically  
to connect one system or device to another.  
2) To physically connect one system or device to another to exchange  
information.  
3) The point of contact between user, the computer, and the program, for  
example, the keyboard or a menu.  
I/O: Input/output. Refers to acceptance and transfer of data to and from a  
computer.  
I/O devices: Equipment used to communicate with the computer and transfer  
data to and from it.  
K
K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to  
1024, or 2 raised to the 10th power. See also byte and kilobyte.  
keyboard: An input device containing switches that are activated by manually  
pressing marked keys. Each keystroke activates a switch that transmits a  
specific code to the computer. For each key, the transmitted code is, in turn,  
representative of the (ASCII) character marked on the key.  
kilobyte (KB): A unit of data storage equal to 1024 bytes. See also byte and  
megabyte.  
Glossary-8  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
L
L1 cache: Level one cache. Memory cache built into the processor to help  
improve processing speed. See also cache memory, L2 cache.  
L2 cache: Memory cache installed on the motherboard to help improve  
processing speed. It is slower than L1 cache and faster than main memory.  
See also cache memory, L1 cache.  
LAN: A group of computers or other devices dispersed over a relatively limited  
area and connected by a communications link that enables any device to  
interact with any other on the network.  
Light Emitting Diode (LED): A semiconductor device that emits light when a  
current is applied.  
Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass  
coated with transparent conducting material. The viewing-side coating is  
etched into character forming segments with leads that extend to the edge of  
the glass. Applying a voltage between the glass sheets.  
M
main board: See motherboard.  
megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte.  
megahertz: A unit of wave frequency that equals 1 million cycles per second. See  
also hertz.  
memory: Typically refers to the computer’s main memory, where programs are  
run and data is temporarily stored and processed. Memory can be volatile and  
hold data temporarily, such as RAM, or it can be nonvolatile and hold data  
permanently, such as ROM. A computer’s main memory is RAM. See RAM,  
ROM.  
menu: A software interface that displays a list of options on the screen. Also  
called a screen.  
microprocessor: A hardware component contained in a single integrated circuit  
that carries out instructions. Also called the central processing unit (CPU), one  
of the main parts of the computer.  
mode: A method of operation, for example, the Boot Mode, Sleep Mode or the  
Hibernation Mode.  
modem: Derived from modulator/demodulator, a device that converts (modulates)  
digital data for transmission over telephone lines and then converts modulated  
data (demodulates) to digital format where received.  
monitor: A device that uses rows and columns of pixels to display alphanumeric  
characters or graphic images. See also CRT.  
User’s Manual  
Glossary-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
motherboard: A name sometimes used to refer to the main printed circuit board in  
processing equipment. It usually contains integrated circuits that perform the  
processor’s basic functions and provides connectors for adding other boards  
that perform special functions.  
N
network: A collection of computers and associated devices that are connected by  
communications facilities. A network allows you to share data and peripheral  
devices, such as printers, with other users and to exchange electronic mail.  
non-system disk: A disk for storing programs and data that cannot be used to  
start the computer. Compare system disk.  
nonvolatile memory: Memory that is capable of permanently storing information.  
Turning the computer’s power off does not alter data stored in nonvolatile  
memory.  
numeric keypad overlay: A feature that allows you to use certain keys on the  
keyboard to perform numeric entry, or to control cursor and page movement.  
O
OCR: Optical Character Recognition (reader). A technique or device that uses  
laser or visible light to identify characters and input them into a storage device.  
online state: A functional state of a peripheral device when it is ready to receive  
or transmit data.  
operating system: A group of programs that controls the basic operation of a  
computer. Operating system functions include interpreting programs, creating  
data files, and controlling the transmission and receipt (input/output) of data to  
and from memory and peripheral device.  
output: The results of a computer operation. Output commonly indicates data.  
1) printed on paper, 2) displayed at a terminal, 3) sent through the serial port  
of internal modem, or 4) stored on some magnetic media.  
P
parallel: Processes that occur simultaneously. In communications, it means the  
transmission of more than one bit of information at a time. On your computer,  
the parallel port provides a parallel communications interface between the  
computer and an appropriate device. Compare serial.  
parity: 1) The symmetrical relationship between two parameter values  
(integers) both of which are either on or off; odd or even; 0 or 1. 2) In serial  
communications, an error detection bit that is added to a group of data bits  
making the sum of the bits even or odd. Parity can be set to none, odd, or  
even.  
Glossary-10  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
password: A unique string of characters used to identify a specific user. The  
computer provides various levels of password protection such as user and  
supervisor.  
PC card: A credit-card-sized expansion card designed to increase the capabilities  
of notebook computers. PC Cards provide functions such as modem, fax/  
modem, hard disk drive, network adapter, sound card, or SCSI adapter.  
PCI: Peripheral Component Interconnect. An industry standard 32-bit bus.  
peripheral: Any device, such as a printer or joystick, that is attached to the  
computer and controlled by the computer’s CPU.  
pixel: A picture element. The smallest dot that can be made on a display or  
printer. Also called a pel.  
plug and play: A capability with Windows that enables the system to  
automatically recognize connections of external devices and make the  
necessary configurations in the computer.  
pointing device: Any device, such as the TouchPad or a mouse, that enables you  
to move the cursor on the screen.  
port: The electrical connection through which the computer sends and receives  
data to and from devices or other computers.  
Power Saver: A TOSHIBA utility that lets you set the parameters for various  
power-saving functions.  
program: A set of instructions a computer can execute that enables it to achieve  
a desired result. See also application.  
prompt: A message the computer provides indicating it is ready for or requires  
information or an action from you.  
R
Radio frequency interference (RFI) shield: A metal shield enclosing the  
printed circuit boards of the printer or computer to prevent radio and TV  
interference. All computer equipment generates radio frequency signals. The  
FCC regulates the amount of signals a computing device can allow past its  
shielding. A Class A device is sufficient for office use. Class B provides a more  
stringent classification for home equipment use. TOSHIBA portable computers  
comply with Class B computing device regulations.  
Random Access Memory (RAM): Volatile memory that can be written to as well  
as read. Volatile here means that information in RAM is lost when you turn  
off your computer. This type of memory is used for your computer’s main  
memory. See also memory. Compare ROM.  
User’s Manual  
Glossary-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
resolution: A measure of the sharpness of the images that can be produced by a  
printer or displayed on a screen. For a printer, resolution is expressed in dots  
per inch (dpi). For a screen, it is expressed as the number of pixels available  
horizontally and vertically  
restart: Resetting a computer without turning it off (also called “warm boot”, “soft  
reset” or “reboot”). See also boot.  
RGB: Red, green, and blue. A device that uses three input signals, each activating  
an electron gun for a primary additive color (red, green, and blue) or port for  
using such a device. See also CRT.  
RJ45: A modular LAN jack.  
Read Only Memory (ROM): Non-volatile memory that can be read but not written  
to. Non-volatile here means that information in ROM remains whether or not  
the computer is receiving power. This type of memory is used to store your  
computer’s BIOS, which is essential instructions the computer reads when you  
start it up. See also BIOS, memory. Compare RAM.  
S
S/P DIF: A standard of digital interface for audio.  
SCSI: Small Computer System Interface is an industry standard interface for  
connection of a variety of peripheral devices.  
SD/SDHC Card: Secure Digital cards are flash memory widely used in a variety of  
digital devices such as digital cameras and Personal Digital Assistants.  
serial: Processes that occur one at a time. In communications, it means the  
transmission of one bit at a time sequentially over a single channel. On your  
computer, the serial port provides a serial interface between the computer and  
an appropriate device. Compare parallel.  
SIO: Serial Input/Output. The electronic methodology used in serial data  
transmission.  
soft key: Key combinations that emulate keys on the IBM keyboard, change  
some configuration options, stop program execution, and access the numeric  
keypad overlay.  
software: The set of programs, procedures and related documentation associated  
with a computer system. Specifically refers to computer programs that direct  
and control the computer system’s activities. See also hardware.  
stop bit: One or more bits of a byte that follow the transmitted character or group  
codes in asynchronous serial communications.  
system disk: A diskette that contains the operating system files needed to start  
the computer. Any diskette can be formatted as a system disk. A system disk  
is also called a “bootable disk”, “boot disk” or a “startup disk.” Compare non-  
system disk.  
Glossary-12  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
T
terminal: A typewriter-like keyboard and CRT display screen connected to the  
computer for data input/output.  
TFT display: A liquid crystal display (LCD) made from an array of liquid crystal  
cells using active-matrix technology with thin film transistor (TFT) to drive each  
cell.  
Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest.  
U
USB: Universal Serial Bus. This serial interface lets you communicate with several  
devices connected in a chain to a single port on the computer.  
V
VGA: Video Graphics Array is an industry standard video adaptor that lets you run  
any popular software.  
volatile memory: Random access memory (RAM) that stores information as long  
as power is supplied to the computer.  
W
warm start: Restarting or resetting a computer without turning it off.  
Wi-Fi®: A registered trademark term of the Wi-Fi Alliance that stands for Wireless  
Fidelity, and is another term for the communication protocol to permit an  
Ethernet connection using wireless communication components.  
window: A portion of the screen that can display its own application, document or  
dialog box. Often used to mean a Microsoft Windows window.  
Wireless LAN: Local Area Network (LAN) through wireless communication.  
Wireless WAN: Wide Area Network (WAN) through wireless communication.  
write protection: A method for protecting a floppy diskette from accidental  
erasure.  
User’s Manual  
Glossary-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Glossary-14  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOSHIBA  
Index  
Corel DVD MovieFactory for  
TOSHIBA  
A
AC adaptor, 2-14  
additional, 8-11  
using, 4-30  
connecting, 3-2  
ASCII characters, 5-7  
D
Display, 1-6  
automatic power off, 1-9  
controller, 1-6  
opening, 3-4  
B
Battery, 6-3  
charging, 6-6  
Display Controller, B-1  
Documentation list, 1-2  
DVD Super Multi Double Layer drive  
problems, 9-10  
disposal, xviii, xix, 9-7  
extending life, 6-9  
monitoring capacity, 6-7  
problems, 9-6  
using, 4-17  
Real Time Clock, 1-4, 6-4, 9-8  
save mode, 1-10  
types, 6-3  
E
Battery Pack, 2-9, 6-3  
additional, 8-11  
Equipment checklist, 1-1  
eSATA/USB Combo Port, 2-3  
ExpressCard, 8-2  
replacing, 6-9  
Bluetooth, 1-8  
inserting, 8-2  
Bluetooth Stack for Windows by  
TOSHIBA, 4-41  
problems, 9-19  
removing, 8-3  
Boot Priority, 7-2  
External monitor, 1-6, 2-3, 8-11  
problems, 9-17  
C
F
Cleaning the computer, 4-44  
Cooling Vents, 2-3  
Fingerprint Sensor, 2-11  
problems, 9-19  
User’s Manual  
Index-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
using, 4-2  
Number Lock, 5-4  
Output, 5-3  
Power plan, 5-3  
Scroll Lock, 5-4  
Sleep, 5-3  
TOSHIBA Zooming  
Utility (enlarge), 5-5  
TOSHIBA Zooming  
Utility (reduce), 5-4  
TouchPad, 5-4  
Wireless, 5-4  
Floppy diskette care, 4-34  
Fn+1(TOSHIBA Zooming  
Utility reduce), 5-4  
Fn+2 (TOSHIBA Zooming  
Utility enlarge), 5-5  
Fn+ESC(Mute), 5-3  
Fn+F1(Lock), 5-3  
Fn+F10 (Enable Keypad), 5-4  
Fn+F11 (Number Lock), 5-4  
Fn+F12 (Scroll Lock), 5-4  
Fn+F2(Power plan), 5-3  
Fn+F3 (Sleep), 5-3  
Zoom, 5-4  
HW Setup, 1-13, 7-1  
accessing, 7-1  
Boot Priority, 7-2  
display, 7-2  
Fn+F4 (Hibernate), 5-3  
Fn+F5 (Output), 5-3  
Fn+F6 (Brightness decreases), 5-4  
Fn+F7 (Brightness increases), 5-4  
Fn+F8 (Wireless), 5-4  
Fn+F9 (TouchPad), 5-4  
Fn+space (Zoom), 5-4  
Fn+Z (Keyboard Backlight), 5-5  
Fn Sticky key, 5-5  
general, 7-1  
keyboard, 7-3  
LAN, 7-3  
password, 7-2  
USB, 7-3  
Function keys, 5-2  
K
Keyboard, 5-1  
G
emulating enhanced keyboard, 5-2  
F1 ... F12 function keys, 5-2  
Fn Sticky key, 5-5  
Graphics Controller, 1-6  
hot keys, 5-3  
problems, 9-8  
typewriter keys, 5-1  
H
Hard disk drive, 1-4  
automatic power off, 1-9  
HDD Protection, 1-10, 4-45  
Hibernation Mode, 1-11, 3-8  
Hot keys, 1-9, 5-3  
Windows® special keys, 5-5  
Keypad overlay, 5-6  
Numeric mode, 5-6  
temporarily using normal keyboard  
(overlay on), 5-7  
Brightness decreases, 5-4  
Brightness increases, 5-4  
Enable Keypad, 5-4  
Hibernate, 5-3  
Keyboard Backlight, 5-5  
Lock, 5-3  
turning on the overlays, 5-6  
L
LAN, 4-42  
Mute, 5-3  
cable types, 4-43  
Index-2  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
connecting, 4-43  
disconnecting, 4-44  
jack, 2-5  
panel power off/on, 6-12  
Shut Down mode (Boot mode),  
problems, 9-18  
Sleep Mode, 3-6  
system auto off, 6-12  
turning off, 3-6  
M
turning on, 3-5  
Media care, 4-33  
Power-up modes, 6-12  
Problems  
CD/DVDs, 4-33  
Floppy diskettes, 4-34  
Memory card care, 8-7  
Memory, 1-3  
AC power, 9-5  
analyzing, 9-2  
battery, 9-6  
expansion, 8-7  
installing, 8-5  
DVD Super Multi Double Layer  
drive, 9-10  
removing, 8-6  
Memory cards, 8-4  
Modem, 4-37  
ExpressCard, 9-19  
Fingerprint Sensor, 9-19  
Hard disk drive, 9-9  
Keyboard, 9-8  
connecting, 4-39  
disconnecting, 4-39  
properties menu, 4-38  
region selection, 4-37  
Monitor, external, 1-6, 2-3, 8-11  
Moving the computer, 4-44  
LAN, 9-18  
LCD panel, 9-9  
Memory expansion, 9-16  
Modem, 9-17  
Monitor, 9-17  
Pointing device, 9-13  
Real Time Clock, 9-8  
Recovery Discs, 9-10  
SD/SDHC memory card, 9-12  
Sound system, 9-17  
USB, 9-14  
O
Optical Disc Drive, 1-5, 2-5, 2-13  
using, 4-17  
USB floppy diskette drive, 9-12  
Wireless LAN, 9-18  
P
Password  
power on, 1-9  
R
Starting the computer by, 6-11  
Pointing device, 1-6, 9-13  
TouchPad, 2-10, 4-1, 9-13  
TouchPad control buttons, 2-10  
Ports, 1-6  
Recovery Discs, 3-11  
problems, 9-10  
Recovery HDD, 3-11  
Restarting the computer, 3-10  
Power  
conditions, 6-1  
Hibernation Mode, 3-8  
indicators, 6-2  
User’s Manual  
Index-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
TOSHIBA Zooming Utility, 1-12  
TouchPad  
S
location, 2-10  
using, 4-1  
Security lock, 8-13  
Sleep Mode  
setting, 3-6  
system automatic, 1-9  
Slot-Loading ODD, 2-5  
inserting, 4-21  
U
USB devices  
problems, 9-14  
removing, 4-22  
Soft keys, 5-2  
Sound system, 4-35  
headphone jack, 2-3  
microphone, 2-12, 4-14  
microphone jack, 2-3  
problems, 9-17  
V
Video RAM, 1-3  
Volume Button, 2-10  
Volume Button, 2-10  
W
Web Camera, 2-10  
using, 4-12  
T
Wireless Communication Switch,  
TOSHIBA Accessibility, 1-12  
TOSHIBA Assist, 1-13  
Wireless LAN, 1-8, 4-40, 9-18  
TOSHIBA Button Support, 1-12  
TOSHIBA Components Common  
Driver, 1-12  
TOSHIBA ConfigFree, 1-16  
TOSHIBA Disc Creator, 1-15  
TOSHIBA DVD-RAM Utility, 1-15  
TOSHIBA DVD PLAYER, 1-13, 4-32  
TOSHIBA Face Recognition, 1-14  
TOSHIBA Flash Cards, 1-12  
TOSHIBA HDD Protection, 4-45  
TOSHIBA PC Diagnostic Tool, 1-12  
TOSHIBA PC Health Monitor, 1-11,  
TOSHIBA Power Saver, 1-12  
TOSHIBA support, 9-20  
TOSHIBA USB Sleep and Charge  
Utility, 1-16, 4-9  
problems, 9-15  
TOSHIBA Value Added Package,  
Index-4  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tascam Music Mixer DP 008 User Manual
Taylor Electric Grill AG 1360 BL User Manual
Texas Instruments Calculator Calculator User Manual
Toshiba Network Card TOPAS900 User Manual
Toshiba Switch IPE002Z User Manual
Transcend Information Network Card TS2GSD133 User Manual
Tyco Electronics Radio MM23016 User Manual
Unitech Barcode Reader MSR102 User Manual
Universal Electronics Universal Remote ATLAS OCAP 5 Device User Manual
VTech Telephone 5873 User Manual