00566A-D-R3_Cover 8/31/04 10:27 AM Page 1
DVD RECORDER
D-R3
OWNER’S MANUAL
Read this booklet first.
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_2~13 8/31/04 10:27 AM Page 2
IMPORTANT NOTE
The mains lead on this equipment is supplied with a
moulded plug incorporating a fuse. The value of the
fuse is indicated on the pin face of the plug. If it
requires replacing, a fuse approved to BS1362 of the
same rating must be used.
Warning
Never use the plug with the fuse cover omitted if the
cover is detachable. If a replacement fuse cover is
required, it must be of the same colour as the pin face
of the plug. Replacement covers are available from
your dealer.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
If the fitted plug is not suitable for the power points in
your house or the cable is not long enough to reach a
power point, you should obtain a suitable safety
approved extension lead or consult your dealer for
assistance.
However, if there is no alternative to cutting off the
plug, remove the fuse and then safely dispose of the
plug. Do not connect the plug to a mains socket, as
there is a risk of shock hazard from the bared flexible
cord.
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
IMPORTANT
This symbol indicates important instruc-
tions accompanying the product.
The wires in the mains lead are coloured in accor-
dance with the following code: -
Do not install this equipment in a confined space such
as a bookcase or similar unit.
BLUE = NEUTRAL BROWN = LIVE
WARNING : To prevent damage which may result in fire
or electric shock hazard, do not expose this
appliance to rain or moisture.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, pro-
ceed as follows: -
The wire coloured BLUE must be connected to the ter-
minal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connect-
ed to the terminal marked with the letter L or coloured
BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E OR BY THE EARTH SYMBOL, OR
COLOURED GREEN OR GREEN AND YELLOW.
CAUTION : DVD Recorder-VCRS USE AN INVISIBLE
LASER BEAM WHICH CAN CAUSE HAZ-
ARDOUS RADIATION EXPOSURE IF
DIRECTED.
BE SURE TO OPERATE RECORDER
CORRECTLY AS INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PER-
FOR-MANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZ-
ARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOUR-SELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
The product unit accompanying this user manual is
licensed under certain intellectual property rights of
certain third parties. This license is limited to private
non-commercial use by end-user consumers for
licensed contents. No rights are granted for commer-
cial use. The license does not cover any product unit
other than this product unit and the license does not
extend to any unlicensed product unit or process con-
forming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used
or sold in combination with this product unit. The
license only covers the use of this product unit to
encode and/or decode audio files conforming to the
ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are
granted under this license for product features or func-
tions that do not conform to the ISO/IEC 11172-3 or
ISO/IEC 13818-3.
CAUTIONS
Caution: To prevent electric shock, match wide blade of
plug to wide slot, fully insert.
Attention: Pour éviter les chocs électriques, introduíre la
lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu
au fond.
This product satisfies FCC regulations when shielded
cables and connectors are used to connect the unit to
other equipment. To prevent electromagnetic interfer-
ence with electric appliances, such as radios and televi-
sions, use shielded cables and connectors for connec-
tions.
2
- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_2~13 8/31/04 10:27 AM Page 3
• Be sure to remove the disc and turn off the recorder
after use.
• Disconnect the AC power cord from the AC outlet
when you don’t intend to use the recorder for long
periods of time.
Precaution
• Clean the disc by wiping in a straight line from the
inside to the outside of the disc.
Important Safety Instructions
Maintenance of Cabinet
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future refer-
ence.
For safety reasons, be sure to disconnect the AC
power cord from the AC outlet.
Do not use benzene, thinner, or other solvents for
cleaning.
●
1) Read these instructions.
2) Keep these instructions.
●
Wipe the cabinet with a soft cloth.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
Disc Handling
●
Use discs with regular
shapes. If an irregular disc
(a disc with a special
shape) is used, this DVD
recorder may be damaged.
7) Do not block any ventilation openings, Install in accor-
dance with the manufacturer's instructions.
8) Do not install near any heat sources such as radia-
tors, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The
wide blade or the third prong are provided for your
safety. if the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
Holding discs
●
Avoid touching the surface of a
disc where recording is per-
formed.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience recepta-
cles, and the point where they exit from the appara-
tus.
11) Only use attachments/accessories specified by the
manufacturer.
Cartridge
●
This is used to prevent damage by dirt, scratches,
ets. when using a DVD-RAM/RW/R disc.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the appa-
ratus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from
tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
DVD-RAM, DVD-RW and DVD-R
●
Clean with an optional DVD-
RAM/PD disc cleaner .
Do not use cleaners or cloths
for CDs to clean DVD-
RAM/DVD-RW/DVD-R discs.
DVD-Video, CD
●
Wipe off dirt or contamination on the disc with a
soft cloth.
Handling Cautions
• Before connecting other components to this recorder,
be sure to turn them all off.
Cautions on handling discs
• Do not move the recorder while a disc is being played,
or the disc may be scratched or broken, and the
recorder’s internal parts may be damaged.
• Do not put a flower vase filled with water or any small
metal objects on the recorder.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc
tray.
●
Do not write on the printed side with a ball-point
pen or pencil.
Do not use record cleaning sprays or antistatic.
Also, do not use volatile chemicals, such as ben-
zene or thinner.
●
• Exterior interference such as lightning and static elec-
tricity can affect normal operation of this recorder. If
this occurs, turn the recorder off and on again with the
STANDBY/ON button, or disconnect and then recon-
nect the AC power cord to the AC power outlet. The
recorder will operate normally.
English -
3
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_2~13 8/31/04 10:27 AM Page 4
• Do not apply labels or stickers to discs. (Do not
use discs fixed with exposed tape adhesive or left-
over peeled-off stickers.)
• Do not use scratch-proof protectors or covers.
• Do not use discs printed with label printers avail-
able on the market.
JPEG CD-R/-RW
• Only JPEG files with the ".jpg", ".JPG" extension
can be used.
• The unit can handle a maximum of 1000 files and
folders.
• Maximum size of progressive JPEG is 3M pixels.
• MOTION JPEG is not supported.
• Do not load warped or cracked discs.
Disc Storage
Using CD-R/-RW
Be careful not to harm the disc because the data on
these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Use a 700MB(80 minutes) CD-R/-RW disc.
If possible, do not use a 800MB(90 minutes) or
above disc, as the disc may not play back.
• If the CD-R/-RW disc was not recorded as a
closed ses-sion, you may experience a delay in
the early play-back time, and all recorded files may
not play.
• Some CD-R/-RW discs may not be playable with
this unit, depending on the device which was used
to burn them.
• Keep in a clean protection jacket.
• If you move your DVD Recorder-VCR suddenly
from a cold place to a warm place, condensation
may generate on the operating parts and lens and
cause abnormal disc playback. If this occurs,
remove the disc and wait for one to two hours with
the power on before attempting playback.
For contents recorded on CD-R/-RW media from
CDs for your personal use, playability may vary
depending on contents and discs.
Disc Specifications
DVD-Video
DVD-R Disc Playback and Recording
• A digital versatile disc (DVD) can contain up to
135-minutes of images, 8-language audio and 32
subtitle languages. It is equipped with MPEG-2 pic-
ture compression and Dolby 3D surround, allowing
you to enjoy vivid and clear theater quality images
in the comfort of your own home.
• Once a DVD-RW/DVD-R recorded in Video Mode
is finalized, it becomes DVD-Video.
• You can record onto the available space on the
disc and perform editing functions such as giving
titles to discs and programs and erasing programs
before finalizing.
• When switching from the first layer to the second
layer of a double-layered DVD Video disc, there
may be momentary distortion in the image and
sound.
• When programming is erased from a DVD-R, that
space does not become available. Once an area
on a DVD-R is recorded on, that area is no longer
available for recording, whether the recording is
erased or not.
This is not a malfunction of the unit.
• It takes about 30 seconds for the unit to complete
recording management information after recording
finishes.
• Once a DVD-RW/DVD-R recorded in Video Mode
is finalized, it becomes DVD-Video.
• This product optimizes the DVD-R for each record-
ing. Optimizing is carried out when you start
recording after inserting the disc or turn on the
unit. Recording onto the disc may become impos-
sible if optimizing is carried out too many times.
• Playback may be impossible in some cases due to
the condition of recording.
• This unit can play back DVD-R discs recorded and
finalized with a Thoshiba DVD recorder. It may not
be able to play some DVD-R discs depending on
the disc and the condition of the recording.
Audio CD
• An audio disc on which 44.1kHz PCM Audio is
recorded.
• Plays CDDA format audio CD-R and CD-RW discs.
This unit may not be able to play some CD-R or
CD-RW discs due to the condition of the recording.
CD-R/-RW
MP3 CD-R/-RW
• Only CD-R discs with MP3 files recorded with
ISO9660 or JOLIET format can be played back
• Only MP3 files with the "mp3", and "MP3" exten-
sion can be used.
• For MP3 files recorded with a VBR(Variable Bit
Rates), from 32 Kbps to 320 Kbps, the sound may
cut in out.
• Playable bitrate range is from 56Kbps to 320Kbps.
• The unit can handle a maximum of 1000 files and
folders.
4
- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_2~13 8/31/04 10:27 AM Page 5
Protection
DVD-RW Disc Playback and Recording
This DVD Recorder
can allow you to pro-
tect the contents of
your discs,
• Recording and playback can be performed on
DVD-RW discs in both Video and VR Modes.
• Once a DVD-RW recorded in VR Mode is finalized,
you cannot perform additional recording.
• Once a DVD-RW recorded in Video Mode is final-
ized, it becomes DVD-Video.
• In both modes, playback can be performed before
and after finalization, but additional recording,
deleting and editing can not be performed after
finalization.
• If you want to record the disc in VR Mode and then
record in V Mode, be sure to execute Format. Be
careful when executing Format because all the
recorded data may be lost.
• A DVD-RW blank disc is initialized to VR Mode
when first initialized.
as described below.
●
Cartridge-protected:
With the Write Protect
tab located in the protect position, the contents of the
disc cannot be recorded, edited, or erased.
Program-protected: See page 69 “Locking a Title”
Disc-protected: See page 81 “Disc Protection”
●
●
● DVD-RAM/DVD-RW/DVD-R discs that are
incompatible with VR/V format can not be played
with this product.
● For more information on recording a DVD, consult
your DVD-RAM/DVD-RW/DVD-R manufacturer.
● If poor quality DVD-RAM/DVD-RW/DVD-R discs are
used, your recordings may fail.
• DVD-RW (VR mode)
- This is a format that is used for recording data on a
DVD-RAM or DVD-RW disc. You can repeat
recording, editing, deleting, partial deletion, cre-
ation of playlist, and etc.
- A disc that is recorded in this mode may not be
played by existing DVD players.
Do not use the following discs!
• DVD-RW (Video mode)
• LD, CD-G, CD-I, CD-ROM, DVD-ROM, VCD,
DVD+R and DVD+RW discs should not be used in
this product.
- This is a format that is used for recording data on a
DVD-RW or DVD-R disc. The disc can be played
by an existing DVD player once it has been final-
ized.
[Note]
- If a disc that has been recorded in Video mode by
a different manufacturer's recorder but has not
been finalized it cannot be played or additionally be
recorded by this recorder.
Disc types that can be played : CD/CD-R/CD-
RW/MP3/ JPEG/DVD-Video/DVD-RAM/ DVD-RW/
DVD-R. However, if your DVD-RW disc was record-
ed with another device, it can be played only if it
was recorded and finalized in video mode.
• Some commercial discs and DVD discs purchased
outside your region may not be playable with this
product. When these discs are played, either “No
disc.” or “Please check the regional code.” will be
displayed.
DVD-RAM Disc Playback and Recording
• DVD-RAM discs come with or without a cartridge.
For this product, we recommend DVD-RAM discs
that come with cartridges.
• Some cartridges are able to eject the disc inside.
Even if you are able to eject the disc, always use
the disc with the cartridge to ensure correct opera-
tion.
• If your DVD-RW disc is an illegal copy or is not in
DVD video format, it may also not be playable.
• DVD-RAM discs have a Write Protect tab in order
to avoid accidental erasure of recorded data. With
the Write Protect tab set to PROTECT, you can
play the disc, but recording or erasing will not
work. Set the Write Protect tab to UNPROTECT to
format the disc or erase data.
• Ensure that the recording mode is set to VR mode.
Otherwise, this product will not be able to play the
recording.
• You cannot play a DVD-RAM in most DVD players
due to compatibility issues.
• Only DVD-RAM standard Version 2.0 discs can be
played in this unit.
• DVD-RAM recorded on this unit may not work with
other DVD Players. To determine compatibility with
these DVD-RAM discs, refer to the user’s manual
for the player.
• This unit is compatible with both non-cartridge and
cartridge DVD-RAM, but the write-protect tabs on car-
tridge-type discs give better protection to your record-
ings.
COPY PROTECTION
•
•
Many DVD discs are encoded with copy protection.
Because of this, you should only connect your DVD
Recorder-VCR directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection technol-
ogy that is protected by methods claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
•
It is permissible to record television programs, film,
video tapes and other material only in the event that
third party copyrights and other rights are not violated.
English -
5
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_2~13 8/31/04 10:27 AM Page 6
Step 4 : Other type of connecting the Audio
output cable ..........................................................18
Method 1 : Connecting to your TV..................................18
Method 2 : Connecting to a stereo amplifier with
Contents
analogue output jacks......................................................19
Method 3: Connecting to an AV amplifier with a
Getting Started
digital output jack ............................................................19
Step 5 : Connecting to AV3, AV4, DV input jack ....19
Method 1 : Connecting a VCR, Set-Top Box(STB) or
DVD player to the AV3 Input jacks..................................19
Method 2 : Connecting a Camcorder to the AV4 Input
jacks..................................................................................20
Method 3 : Connecting a Camcorder to the DV IN jack ...20
Step 6 : Preparing the Remote Control................21
Setting the Remote Control.............................................21
Warning........................................................................2
Precaution...................................................................3
Important Safety Instructions.............................................3
Handling Cautions..............................................................3
Maintenance of Cabinet.....................................................3
Disc Handling .....................................................................3
Disc Storage.......................................................................4
Disc Specifications.............................................................6
General Features........................................................8
Before reading the user’s manual .........................9
How to use the DVD Recorder ................................9
Description................................................................11
Front Panel .......................................................................11
Front Panel Display..........................................................11
Rear Panel........................................................................12
Tour of the Remote Control.............................................13
System Setup
On-Screen Menu Navigation..................................23
Plug & Auto Set up .................................................24
Clock Set ...................................................................25
Auto Setup ................................................................26
Manual Setup............................................................27
CM Skip Time Setting..............................................28
Setting Up the NICAM Options..............................29
Setting Up Scart Jack Options..............................29
Setting Up the Language Features.......................30
Setting Up the Audio Options................................31
Audio Options...................................................................31
Setting Up the Display(Video) Options................32
Display(Video) Options....................................................32
Setting Up the Parental Control ............................33
About the Change Password;.........................................33
Connecting & Setting UP
Quick Overview........................................................14
Step 1 : Unpacking ..................................................15
Accessory.........................................................................15
Step 2 : Connecting SCART Cable ........................15
Method 1 : Antenna + DVD Recorder + TV...................15
Method 2 : Antenna + VCR/satellite receiver/cable box +
DVD Recorder + TV .......................................................16
Method 3 : Antenna + DVD recorder + external decoder
box + TV...........................................................................17
Step 3 : Other type of connecting the Video
output cable ..........................................................17
Method 1 : Connecting to a Composite Video output
jack....................................................................................17
Method 2 : Connecting to an S-video output jack..........17
6
- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_2~13 8/31/04 10:27 AM Page 7
Changing the Camera Angle...........................................55
Zooming-In .......................................................................55
Using PIP(Picture in Picture)...........................................56
Using Last Mark...............................................................56
Using Bookmarks.............................................................57
Using Markers..................................................................58
Playing an Audio CD/MP3 .....................................59
Playing an Audio CD (CD-DA)/MP3...............................59
Playing a Picture CD ...............................................62
Playing the Title List................................................63
Recording
Before Recording.....................................................34
Recordable discs..............................................................34
Recording Formats ..........................................................35
Recording Mode...............................................................35
Unrecordable pictures......................................................35
About DISPLAY Key........................................................36
Checking the available disc space
(Disc Information).............................................................36
Recording the current TV program you are
watching....................................................................36
Recording from external equipment you are
watching....................................................................38
Reviewing Images Being Recorded (Time Slip).39
Making a One Touch Recording (OTR)................40
Making a Standard Timer .......................................41
Flexible Recording (for Timer recording only) ...42
Editing a Standard Timer........................................42
Deleting a Standard Timer......................................43
Using the Video Plus+ Feature..............................44
Video Plus+ Extended.............................................45
Recording the Standard Timer List ......................46
Editing
Basic Editing (Title List)...................................................66
Renaming(Labeling) a Title .............................................66
Locking(Protecting) a Title...............................................67
Deleting a Title .................................................................67
Deleting a Section of a Title ...........................................68
Advanced Editing (Play List)...........................................70
Creating a Playlist ...........................................................70
Playing Entries in the Playlist .........................................71
Renaming a Playlist Entry ...............................................72
Editing a Scene for the Playlist .......................................73
Copying a Playlist Entry to the Playlist ...........................76
Deleting a Playlist Entry from the Playlist.......................77
Disc Manager ..............................................................78
Editing the Disc Name.....................................................78
Disc Protection .................................................................79
Formatting a Disc.............................................................79
Delete All Title Lists..........................................................80
Cartridge Protect Info.......................................................81
Finalizing a disc................................................................81
Unfinalizing a disc (V/VR mode) ....................................82
Playback
Before Playing..........................................................47
Region code (DVD-Video only).......................................47
Disc types that can be played.........................................47
Discs that cannot be played............................................47
Playing a Disc...........................................................48
Using the Disc & Title Menu............................................49
Using the Search Functions............................................49
Slow Motion Play .............................................................50
Step Motion Play..............................................................50
About ANYKEY ................................................................50
Using the Repeat Function..............................................51
Selecting the Subtitle .......................................................54
Selecting the Audio language..........................................54
Additional Information
Troubleshooting.......................................................84
Specifications...........................................................88
English -
7
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_2~13 8/31/04 10:27 AM Page 8
A variety of functions with an easy-to-use user
interface
General Features
The integrated menu system and the messaging
function allow you to perform desired operations both
easily and conveniently. With a DVD-RAM or DVD-RW
disc, you can edit recorded images, create a playlist,
and edit images in a specific sequence according to
your requirements.
The DVD-D-R3 allows you to record and play high qual-
ity digital images on DVD-RAM/DVD-RW/DVD-R discs.
You can record and edit digital images on DVD-
RAM/DVD-RW/DVD-R discs as if they were VCR tapes.
High quality digital audio and video recording
and playback
Record up to 12-hours of images with a double sided
9.4 GB DVD-RAM disc, and up to 6-hours of images
with a 4.7 GB DVD-RAM/DVD-RW/DVD-R disc,
depending on the recording mode.
Selectable Recording Mode
You can set your recorder to one of five different
recording speeds, each varying in recording quality and
length. EP mode yields the most recording time, LP &
SP modes provide less recording time with higher
quality recording, and XP mode gives you the highest
quality recording. There's also the FR (Flexible
Recording) mode that lets you record with the best
picture quality possible for the recording time and
remaining space on the disc in timer recording.
Automated Quality Adjustment for Timer Recording
If FR mode is selected, the video quality is adjusted
automatically so that all images for the scheduled time
can be recorded onto the free disc space.
(See page 42.)
Time Slip and Picture In Picture (PIP)
Use the Time Slip function to review the recorded
images while a recording is underway.
Use the PIP function to view both the playback and
recording screens simultaneously.
(See page 39 and 56.)
Creating a DVD video title using DVD-RW/DVD-R
disc
With a DVD-R100E, create your own DVD video title on
4.7 GB DVD-RW/DVD-R discs.
Copying data from a digital camcorder using a DV
input jack
Record digital camcorder images onto DVD-RAM or
DVD-RW, DVD-R discs using the DV input jack
(IEEE 1394-4pin/4pin). (See pages 20 and 38.)
8
- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_2~13 8/31/04 10:27 AM Page 9
Before reading the user’s
manual
How to use the DVD
Recorder
Make sure to check the following matters before
reading the user’s manual.
Select the disc type
Step 1
Icons that will be used in manual
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc or
you want to edit the disc after recording, select a
rewritable DVD-RW or DVD-RAM type disc.
If you want to save recording without any change,
choose a non-rewritable DVD-R.
Icon
Term
DVD
Definition
This involves a function available
in DVD or DVD-R/DVD-RWdiscs
that have been recorded and
finalised in Video Mode.
This involves a function available
in DVD-RAM.
RAM
RW
R
This involves a function available
in DVD-RW.
This involves a function available
in DVD-R.
This involves a function available
in a data CD (CD-R or CD-RW).
CD
This involves a function available
in a data picture CD (CD-R or
CD-RW).
JPEG
MP3
Step 2
Format the disc to start recording
This involves a function available
in a data CD (CD-R or CD-RW
on which MP3 is recorded).
Unlike a VCR, the recorder automatically starts format-
ting when an unused disc is inserted. This is required
for the preparation of recording on a disc.
This involves a case where a
Caution function does not operate or
settings may be cancelled.
Using a DVD-RAM
This involves tips or instructions
on the page that help each
function operate.
This type of disc can be formatted in DVD-Video
Recording format (VR mode). You can edit recorded
image and create a playlist and edit images in a
specific sequence according to your requirements.
NOTE
One-Touch A function that can be operat
button by using only one button.
Using a DVD-RW
This type of disc can be formatted in either DVD-Video
format (Video mode) or DVD-Video Recording format
(VR mode). For an unused disc, a message that asks
whether to format in VR Mode or not is displayed.
You can play a Video mode disc on various DVD com-
ponents. A VR mode disc allows more varied editing.
About the use of this user’s manual
Using a DVD-R
This type of disc can be formatted in DVD Video
format. After formatting is complete, you can record on
the disc. You can play this type of discs on various
DVD components only when they have been finalised.
1) Be sure to be familiar with Safety Instructions before
using this product. (See pages 4~3)
2) If a problem occurs, check for Troubleshooting.
(See pages 84~87)
●●
You can only use one format on a
DVD-RW.
Copyright
NOTE
●●
You can change the DVD-RW for-
©2004 Tashiba Corporation
mat to another format. It should be
noted that the data of the disc may
be lost when changing formats.
All rights reserved; No part or whole of this user’s
manual may be reproduced or copied without the prior
written permission of Tashiba Corporation.
English -
9
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_2~13 8/31/04 10:28 AM Page 10
Recording
Finalizing & Playing on other DVD components
Step 3
Step 6
There are two different recording methods, Direct
Recording and Timer Recording. Timer recording is
classified as recording type : Once, Daily or Weekly or
recording mode : XP (high quality mode), SP (standard
quality mode), LP (long recording mode), and EP
(extended mode) according to the recording mode.
When recording is set in the FR mode, the best quality
picture is recorded with regards to the remaining time
on the disc.
To play your DVD on other DVD components, finaliz-
ing may be necessary. First, finish all editing and
recording operations, then finalise the disc.
When using a DVD-RW disc in VR Mode
Although finalizing is generally unnecessary when
playing the disc on a VR Mode compatible component,
a finalised disc should be used for playback on that
type of component.
When using a DVD-RW disc in Video Mode
The disc should be finalised first to enable playback on
anything other than this recorder. No more editing or
recording can be made on the disc once it has been
finalised.
Playing
Step 4
When using a DVD-R disc
You can select the title you want to play in a displayed
menu and then immediately start playback.
A DVD consists of sections, called titles, and sub
sections, called chapters.
You should finalise the disc to play it on a component
other than this recorder. You cannot edit or record on
the disc once it has been finalised.
During recording, a title is created between two points
where you start and stop recording. DVD-R/DVD-RW
discs (in Video mode) can automatically create chap-
ters according to the recording mode when finalised.
Editing a recorded disc
Step 5
Editing on discs is easier than conventional video
tapes. The recorder supports many different edit
functions, possible only with DVDs.
With a simple and easy edit menu, you can operate
various edit functions, such as delete, copy, rename,
lock, etc., on a recorded title.
Creating a playlist (DVD-RAM/-RW in VR mode)
With this recorder, you can create a new playlist on the
same disc and edit it without the change of the original
recording.
1 0 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_2~13 8/31/04 10:28 AM Page 11
Description
Front Panel
1. STANDBY/ON
Turns the recorder on and off.
11. REC
Starts recording.
12. PR (
2. DV-IN
)
Connects external digital equipment with a DV jack.
3. AV4 IN
Connects external equipment.
Select TV preset channels.
Same as PROG buttons in remote control.
13. REC PAUSE
Pauses recording.
4. DISC TRAY
Opens to accept a disc.
14. TIME SLIP
The Time Slip function allows you to view a
recorded program through the PIP window at least
10 seconds after recording starts. Playback and
recording can be done at the same time.
5. DISPLAY
Displays the playing status, title/ chapter/ time, etc.
6. OPEN/CLOSE
Opens and closes the disc tray.
15. INPUT
7. STOP
Stops disc playback.
Selects equipment connected to the line inputs.
16. PIP
8. PLAY/PAUSE
Plays a disc or pauses playback.
To watch an external source on the PIP(sub) pic-
ture or to monitor Time Slip.
9. SEARCH
17. LAST MARK
Goes to the last bookmarked position.
18. TIME SLIP LED
Goes to the next title/chapter/track, or goes back to
the previous title/chapter/track.
10. RECORD MODE
The LED indicator lights up green when the Time
Slip function operates.
Selects the recording mode.
Front Panel Display
T
C
PL
AM PM
REC
1. This lights to indicate the names of the sections of
the disc being played.
2. Lights to indicate the timer recording mode.
3. Lights in the record mode.
4. Lights in the playback/pause mode.
5. Displays the title, chapter, title list or playlist number
and displays the message during playback.
English -1 1
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_2~13 8/31/04 10:28 AM Page 12
Rear Panel
Fan
The fan always revolves when the power is on.
Ensure a minimum of 10cm clear space on all sides of
the fan when installing the product.
1. DIGITAL AUDIO OUT
4. AV1(TV) OUTPUT SCART
Connects to an amplifier having a digital input jack.
5. AV2(EXT) INPUT SCART
2. ANALOGUE AUDIO OUT
Connects to the audio input of external equipment
using audio cables.
6. AV3 IN(AUDIO/VIDEO)
Connects the output of external equipment using an
audio/video or S-Video cable.
3. VIDEO OUT
Connects the input of external equipment using a
Video or S-Video cable.
7. VHF/UHF
Connects antenna cables.
1 2 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_2~13 8/31/04 10:28 AM Page 13
10. MENU Button
Tour of the Remote Control
Brings up the DVD Recorder’s setup menu.
11. TITLE LIST/DISC MENU Button
Use this to enter the View Recording list/Disc menu.
12. OK/DIRECTION Buttons
(UP/DOWN or LEFT/RIGHT Buttons)
This button functions as a toggle switch.
1
2
19
13. RETURN Button
Returns to a previous menu.
14. REPEAT Button
Allows you to repeat a title, chapter, track or disc.
15. DISPLAY. Button
3
4
5
6
20
21
This will display current setting or disc status.
16. REC Button
22
Use to make a recording on DVD-RAM/-RW/-R
discs.
23
24
7
8
17. REVERSE STEP Button
Each press of this button will play one-frame
reverse.
9
18. PIP Button
Use to watch a sub program on the PIP screen
while watching the main program on the main
screen.
10
25
26
11
12
19. TV STANDBY/ON Button
20. AUDIO/TV MUTE Button
Use this to access various audio functions on a
disc.(DVD mode)
This operates as Sound Mute. (TV mode)
27
28
29
13
14
15
16
17
18
21. CM SKIP Button
When a program recorded on a DVD-RAM, a
DVD-RW, a DVD-R or DVD-Video is played, the unit
can be set to automatically skip a portion of the
program.
30
31
32
22. INPUT SEL Button
Select line input signal in external input mode(Tuner
or Line input)
23. TIME SLIP Button
The Time Slip function allows you to view a
recorded program through the PIP window at least
10 seconds after recording starts. Playback and
recording can be done at the same time.
1. DVD STANDBY/ON Button
2. Number Buttons
24. MARKER Button
Use this to bookmark a position while playing a disc.
3. TV/DVD Button
25. QUICK Button
4. TV Button
Use this to view the status of the disc that is being
played.
Press this to operate TV.
5. DVD Button
Press this when you use a DVD.
26. PLAY LIST/TITLE MENU Button
Use this to return to the Title menu, or to view the
recorded files list.
6. TV Control Buttons
• TV VOL Button
27. CANCEL Button
TV volume adjustment
• PROG Button
Allows you to program a specific order.
Same as PR buttons in Front panel.
28. REPEAT(A-B) Button
Press to repeat between A-B disc.
29. SUBTITLE Button
7. OPEN/CLOSE Button
Press this to switch the DVD’s subtitle language.
To open and close the disc tray.
30. REC PAUSE Button
8. VIDEO Plus+ Button
Use this to pause during recording.
Press to make a timer recoding of a programme by
entering the programmes VIDEO Plus+ number.
31. FORWARD STEP Button
Each press of this button will play one-frame for-
ward
9. Playback-related buttons
Search, Skip, Stop, Play/Pause
32. REC SPEED Button
English -1 3
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 14
Quick Overview
Connecting
& Setting Up
A Quick Overview presented in this guide will give you
enough imformation to start using the recorder.
This section involves various methods of
connecting the DVD player to other external
components and required initial setting modes.
Step 1 : Unpacking
†
Step 2 : Connecting SCART Cable
†
Step 3 : Other type of connecting the Video output cable
†
Step 4 : Other type of connecting the Audio output cable
†
Step 5 : Connecting to AV 3, AV 4, DV input jack
†
Step 6 : Preparing the Remote Control
Quick Overview ................................................14
Step 1 : Unpacking...........................................15
Step 2 : Connecting SCART Cable .................15
Step 3 : Other type of connecting the
Video output cable..............................17
G
Note to CATV system installer: This reminder is
provided to call CATV system installer’s attention to
Article 820-40 of the National Electrical Code (Section
54 of Canadian Electrical Code, Part I), that provides
guidelines for proper grounding and, in
Step 4 : Other type of connecting the
Audio output cable .............................18
Step 5 : Connecting to AV 3, AV 4, DV input jack .20
Step 6 : Preparing the Remote Control ..........21
particular, specifies that the cable ground shall be
connected to the grounding system of the building as
close to the point of cable entry as practical.
14- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 15
Step 2: Connecting SCART
Cable
Step 1: Unpacking
There are several ways to connect your DVD Recorder
using scart cables.
Accessory
Check for the supplied accessories below.
Select one of the following connections that best suits you.
G
G
Method 1 : Antenna + DVD Recorder + TV
Method 2 : Antenna + VCR/satellite receiver/cable
box + DVD Recorder + TV
GG
If you are using an off-air antenna that
has 300-ohm twin flat leads, use an
NOTE
external antenna connector (300-75 ohm
adaptor : not supplied) to connect the
antenna to the DVD Recorder.
Video/Audio Cable
RF Cable for TV
Batteries for Remote
Control (AAA Size)
GG
If you have two separate antennas (one
VHF and the other UHF), use a UHF/VHF
combiner-adaptor (available at most
electronics shops) to connect the antenna
to the DVD Recorder.
Remote Control
Instruction Manual
GG
The VHF/UHF RF OUT jack of this
product sends only signals received
through the antenna. It does not output
Audio/ video signals. You must connect
audio/video cables to view Video from the
unit. (i.e. DVD playback)
English -15
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 16
Method 1 : Antenna + DVD
Recorder + TV
Method 2 : Antenna +
VCR/satellite receiver/cable box
+ DVD Recorder + TV
You can connect your DVD Recorder to the television
using the SCART cable if the appropriate input is
available on the television. You thus:
G
Obtain better quality sound and pictures
Simplify the setting up procedure of your DVD
Recorder
G
1. Connect the RF cable as shown.
1
2. Connect one end of the SCART cable to the AV1
socket on the rear of the DVD Recorder.
5
3. Plug the other end into the appropriate connector
on the television.
2
external device
(VCR/satellite receiver/cable box)
3
4
2
3
Before making or changing any rear panel connections,
make sure that all components are switched off and
unplugged from the wall outlet.
1. Connect the cable from the antenna/cable TV outlet
to the antenna input on your VCR/satellite
receiver/cable box.
2. Connect the antenna output of your VCR/satellite
receiver/cable box to the ANTENNA IN of DVD
Recorder using antenna cable.
3. Use another RF antenna cable to connect the
ANTENNA OUT of DVD Recorder to the antenna
input on your TV.
4. Connect the AV1 connector on DVD Recorder to the
SCART AV connector on TV using a SCART cable.
GG
Regardless of the type of connection
chosen, you must always connect the RF
cable supplied. Otherwise, no
picture will be visible on the screen when
the DVD Recorder is switched off.
NOTE
5. Connect the AV2 connector to a SCART AV
connector on VCR/satellite receiver/cable box.
6. Setup “AV1 Out option” using on-screen menu.
GG
GG
Refer to page 29.
Make sure that both the television and the
DVD Recorder is switched off before
connecting the cables.
If you want to record one channel while
watching another channel on TV screen,
press TV/DVD button.
16- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 17
Method 2 : Connecting to an
S-video output jack
Step3 : Other type of
connecting the Video
output cable
Connect an S-video cable(not supplied) between the
S-VIDEO OUT jack on DVD Recorder and S-VIDEO IN
jack on the TV (or AV amplifier).
You will enjoy high quality images. S-Video separates
the picture element into black and white (Y) and color
(C) signals to present clearer images than regular
video input mode.
G
There are several ways to output video signal not using
scart cables. Select one of the following video
connecting that best suits you below.
G
G
Method 1 : Connecting to a Composite Video output
jack
Method 2 : Connecting to an S-video output jack
S-Video Output Modes
G
S-Video output are available only if your TV supports
S-Video input. If S-Video output does not work, check
the TV connections and the TV input selection
settings. (For information on how to connect to a TV,
see pages 15 to 16.)
Method 1 : Connecting to a
Composite Video output jack
Connect a video(yellow) cable between the VIDEO
(yellow) OUT jack on DVD Recorder and VIDEO
(yellow) IN jack on the TV (or AV amplifier).
G
You will enjoy regular quality images.
Connect audio cables( white and red) between the
ANALOGUE AUDIO OUT jacks on the DVD Recorder
and AUDIO IN jacks on TV( or AV amplifier).
(See page 18)
G
English -17
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 18
Method 2 : Connecting to a
stereo amplifier with analogue
output jacks
Step 4 : Other type of
connecting the Audio
output cable
If your stereo amplifier only has audio input jacks
(L and R), use the analogue audio out jacks.
There are several ways to output audio signal not using
scart cables. Select the audio connection that best suits
you below.
G
G
Method 1 : Connecting to your TV
Method 2 : Connecting to a stereo amplifier
(analogue audio out / digital audio out)
Method 3 : Connecting to an AV amplifier with a
digital output jack
G
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Method 1 : Connecting to your
TV
This connection will use your TV’s speakers.
18- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 19
Method 3: Connecting to an AV
amplifier with a digital
output jack
Step 5 : Connecting to
AV3, AV4, DV input jack
If your AV amplifier only has a Dolby Digital, MPEG-2 or
DTS decoder and a digital input jack, use this
connection. To enjoy Dolby Digital, MPEG-2 or DTS
sound, you will set up the audio settings. (See page 31)
This allows you to connect your DVD Recorder to other
external devices and view or record their outputs.
G
G
G
Method 1 : Connecting a VCR, Set-Top Box(STB) or
DVD player to the AV3 Input jacks
Method 2 : Connecting a Camcorder to the AV4 Input
jacks
Method 3 : Connecting a Camcorder to the DV IN
jack
Method 1 : Connecting a VCR,
Set-Top Box(STB) or DVD play-
er to the AV3 Input jacks
Connecting a VCR or external device to AV3 IN jacks of
the DVD Recorder.
You can record from connected equipment (VCR, STB
or DVD).
GG
You can also use the AV4 IN jacks on the
front panel of the DVD Recorder.
NOTE
GG
When the S-Video jack and Video jack
are both connected, the S-Video jack will
have priority.
GG
AV IN Selection will be automatically
done.
GG
Copy protected content cannot be
recorded.
English -19
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 20
Method 2 : Connecting a
Camcorder to the AV 4 Input
jacks
Method 3 : Connecting a
Camcorder to the DV IN jack
If your camcorder has a DV output jack, connect it to
the DV input jack of your DVD Recorder.
DVs can be used as only input jack, not output jack.
You can also use the AV 4 IN jacks on the front panel of
the DVD Recorder. You can record from connected
equipment.
When an input source is inserted into AV 4 while
viewing TV, the input will be switched to AV 4
automatically.
20- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 21
Setting the Remote Control
Your DVD Recorder remote control will work with
Samsung televisions and compatible brands.
Step 6 : Preparing the
Remote Control
Install Batteries in the Remote Control
G
Open the battery cover on the back of the remote.
Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
G
G
Replace the battery cover.
If remote does not operate properly:
G
G
G
G
Check the polarity + - of the batteries (Dry-Cell)
Check if the batteries are drained.
Check if remote sensor is blocked by obstacles.
Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local
environmental regulations. Do not put them in the
household trash.
English -21
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 22
To determine whether your television is
compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Hold down the TV STANDBY/ON button and enter
the two-figure code corresponding to the brand of
your television, by pressing the appropriate numeric
buttons.
SABA
0281
0641
0231
0351
0651
0411
0241
0181
0661
0041
0241
0721
0051
0381
0661
0441
0351
0251
0791
0081
0451
0421
0671
0451
0431
0551
0411
0471
0491
0541
0501
SAISHO
SALORA
SAMSUNG
0231
0171
0631
0021
0231
0711
0011
0591
0091
0031
0851
0071
0091
0001
0471
0441
0041
0091
0371
1061
0071
0621
0041
0281
0521
0041
0601
0021
0201
0651
0031
0931
0281
SANYO
0121
0571
0171
0651
0181
0671
0201
0701
SCHNEIDER
0061
0281
0461
0501
0561
0581
Controllable TV Codes
Brand name
TOSHIBA
AIWA
AKAI
BAIRD
BANG & OLUFSEN
BEKO
BLAUPUNKT
BRIONVEGA
BUSH
CROWN
DANSAI
DEAWOO
DECCA
FERGUSON
Brand code
0071
SEG
SELECO
SHARP
SIEMENS
SINGER
SINUDYNE
0121
0051
0511
0321
0471
0091
0501
0451
0301
0141
0501
0151
0061
0571
0331
0651
0101
0551
0571
0351
0171
0511
0001
0921
0201
0171
0471
0181
0071
0461
0071
0111
0501
0401
0091
0031
0541
0021
0281
0041
0651
0001
0171
0201
0171
0171
0011
0241
0021
0571
0171
0231
0231
0311
0471
0241
0501
0611
0201
0001
0501
0041
0201
0651
0371
1061
0231
0281
0541
0481
0001
0501
0371
1061
0071
0211
0311
0571
0431
0351
0201
0571
0501
0501
0631
0241
0241
0501
0501
0521
0661
0641
0131
0581
0681
0431
0441
0531
0191
0651
0231
0361
0321
0471
0501
0131
0331
0651
0551
0411
SONY
TANDBERG
TATUNG
TECHNICS
0461
0451
0761
0571
0501
0841
0651
0911
0601
0571
0491
0411
0141
0071
0601
0041
0291
0121
0501
0171
0131
TELEFUNKEN
0281
0671
0381
0421
0431
0521
0441
0191
0451
0291
0501
0311
0381
0271
0571
TENSAI
THOMSON
0351
0541
0071
0671
0491
0501
0771
0051
0371
0641
0281
0381
0971
0291
0391
1041
0341
0421
0421
0461
0491
FINLUX
FISHER
0071
0301
0181
0081
0341
0201
0091
0471
0281
0111
0471
THORN
UNIVERSUM
YAMAHA
FUNAI
GEC
0191
0221
0251
0281
0241
0071
0411
0221
0641
0281
0241
0241
0431
0501
0261
0071
0651
0501
0171
0551
0331
0321
0771
0501
0481
0491
0891
0501
0321
0061
0331
0351
0451
0501
0511
0561
0571
GOLDSTAR
GOODMANS
GRANADA
GRUNDIG
HINARI
0281
0501
0271
0271
0571
0251
0751
0411
0261
0261
0521
0571
0271
0191
0411
0571
0501
0321
0631
0351
ZANUSSI
ZENITH
0571
0331
0651
0381
0671
0431
Result: If your television is compatible with the remote
control, it will switch off.
HITACHI
0371
INNO HIT
ITT
ITT-NOKIA
JVC
LOEWE OPTA
LUXOR
MAGNAVOX
0501
0271
0271
0571
0651
0281
0221
0631
0401
0401
0661
0611
0611
It is now programmed to operate with the
remote control.
GG
If several codes are indicated for your
television brand, try each one in turn until
you find one that works.
0351
0461
NOTE
0471
0441
0591
0451
GG
MARANTZ
MATSUI
If you replace the remote control’s
batteries, set the brand code again.
0191
0571
0361
0331
0231
0411
METZ
MITSUBISHI
0461
0451
0471
0501
0651
0511
0571
0911
NATIONAL
0511
0531
0761
0841
You can then control the television using the
following buttons.
NOKIA
NORDMENDE
0241
0351
0641
0261
0381
0671
0271
0421
0401
0431
0611
0461
0521
Button
Function
OCEANIC
ORION
TV STANDBY/ON Used to switch the television on and off.
0191
0551
0501
0231
0611
0511
0361
0531
0201
0461
0411
0761
0271
0471
1051
0441
0841
0301
0501
0451
0911
0461
0591
INPUT
Used to select an external source.
Used to adjust the volume of the television.
Used to select the required channel.
Used to toggle the sound on and off.
PANASONIC
PHILCO
TV VOL + or -
PROG ( or
TV MUTE
)
0111
0181
0501
0651
0191
0651
0431
1041
1071
1001
0481
PHILIPS
0071
0611
0381
0971
0971
0631
0501
0221
PIONEER
PROSCAN-THOMSON
RCA
0501
0201
1081
1011
0321
0831
0501
1091
1021
0331
GG
The various functions will not necessarily
work on all televisions. If you encounter
problems, operate the television directly.
0201
1031
0501
1041
0851
0651
0501
0201
0771
NOTE
REALISTIC
22- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 23
On-Screen Menu
Navigation
System
Setup
The on-screen menus allow you to enable or disable
various functions on your DVD Recorder.
Use the following buttons to open and navigate through
the on-screen menus.
Setup
No Disc
System
√
√
√
√
√
Language
Audio
Video
Parental Control
MOVE
OK
RETURN
EXIT
MENU Button
1
Press this button on the remote control while the DVD
Recoder is in Stop or Play mode to open the on-screen
MAIN MENU. And you can exit the on-screen MENU all
together.
Up/Down and Left/Right
2
3
4
Use these buttons to move the selection bar up/down
and left/right to cycle through the menu options.
OK Button
Press this button on the remote control to confirm any
new settings.
RETURN Button
Press this button on the remote control to return to the
last MENU screen displayed.
On-Screen Menu Navigation......................23
Plug & Auto Set up.....................................24
Clock Set .........................................................25
Auto Setup..................................................26
Manual Setup .............................................27
CM Skip Time Setting.................................28
Setting Up NICAM Options ........................29
Setting Up Scart Jack Options...................29
Setting Up the Language Features............30
Setting Up the Audio Options.....................31
Setting Up the Display(Video) Options.......32
Setting Up the Parental Control .................33
English -23
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 24
After Auto Channel Scan is completed,
Auto Clock Setting will be started
automatically in 10 seconds. If you want
to start Auto Clock Setting immediately,
press OK button. If you do not want to
do Auto Clock Setting, press CANCEL or
MENU button.
6
Plug & Auto Set up
Your DVD Recorder will automatically set itself up when
it is plugged in for the first time. TV stations and clock
will be stored in memory. The process takes a few
minutes. Your DVD Recorder will then be ready for use.
Auto channel scan completed successfully.
Press [OK] button to auto clock set.
Cancel
OK
Connect the RF cable as indicated on
1
page 15.
(Connecting Your DVD Recorder to the TV Using the RF
cable)
Wait until current date and time are
displayed automatically. If you want to
exit Auto clock setting, press MENU
button.
Plug the DVD Recorder in.
7
8
2
3
Press a Number button to select the
language.
Please wait. Now setting the clock.
If you want to exit clock setting,
press the [MENU] button.
Check the date and time.
Start the auto setup.
Clock Set
THU
No Disc
4
5
Time
12
Date
00 01 JAN
Year
2004
:
Auto setup will be started.
Auto Clock :
Off
Check antenna and TV cable connection.
OK
Cancel
MOVE
OK
RETURN
EXIT
• if it is : Correct, Press OK button then the date and time will
be saved.
• if it is : Incorrect, input correct Time, Date, Year using
†…œ √ buttons or number buttons.
Auto Channel scan will be started.
Press OK button then the date and time will be saved.
When you need to change clock setting, you can set
up it manually. (see page 25)
Channel scan
Now, Scanning.
5%
GG
Now, DVD Recorder is ready for use.
Function for “Plug & Auto Set Up” is fixed
NOTE
already. So if you want to change this
fixed one, you can change it by Presetting
the Stations in OSD “Manual Setup”
menu. (see page 27)
•
The number of stations automatically stored by the DVD
Recorder depends on the number of stations that it has found.
24- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 25
Set Auto clock tap “On” or “Off” using
6
the …† buttons.
Clock Set
Clock Set
THU
DVD-RAM(VR)
Time
12
Date
00 01 JAN
Year
2004
:
Auto Clock :
Off
This menu is used to set the current time.
You need to set the time to use timer recording.
MOVE
OK
RETURN
EXIT
With the unit in Stop mode, press the
1
2
MENU button.
Press OK button, then the date and time
will be saved.
If you don’t press OK button, it will not be saved.
7
Using the †… buttons, move the
selection bar to “Setup” then press OK
button to select.
Setup
DVD-RAM(VR)
System
√
√
√
√
√
GG
You must have the antenna connected to
Language
Audio
set the Auto Clock.
NOTE
Video
See page 15 Connections.
Parental Control
GG
Auto Clock : The recorder sets the clock
automatically by searching for a channel
that carries a time signal.
MOVE
OK
RETURN
EXIT
Select “System” the †… buttons, then
3
4
5
press the √ or OK button.
System
DVD-RAM(VR)
System
√
√
√
√
√
Language
Audio
Video
Parental Control
MOVE
OK
RETURN
EXIT
Select “Clock Set” using the †…
buttons, then press the √ or OK button.
System
DVD-RAM(VR)
Clock Set
Install
√
√
√
√
√
CM Skip Time
AV1 Output
NICAM
: 15 Sec
: Video
: On
MOVE
OK
RETURN
EXIT
Use navigation †…œ √ buttons to input
Time, Date, Year. Use number button to
input clock data directly.
English -25
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 26
Press OK button to continue.
6
7
If you want to exit, press MENU button.
Auto Setup
Install
DVD-RAM(VR)
Auto Setup
√
√
Your data will be lost.
Press [OK] to continue, Menu to exit.
This feature allows you to manually set the DVD
Recorder tuner band to Antenna or Cable, whichever
you connected to the Antenna In jack during initial
setup.
OK
MOVE
OK
RETURN
EXIT
Channel scan will be started.
Select “Stop” using OK button to exit.
With the unit in Stop mode, press the
1
2
MENU button on the remote.
Auto Setup
DVD-RAM(VR)
Please wait.
Scanning...
Using the †… buttons, move the
selection bar to “Setup” then press OK
button to select.
11%
Stop
OK
RETURN
EXIT
Using the †… buttons, move the
selection bar to “System” then press OK
button to select.
3
Setup
DVD-RAM(VR)
System
√
√
√
√
√
Language
Audio
Video
Parental Control
MOVE
OK
RETURN
EXIT
Using the †… buttons, move the
selection bar to “Install”, then press OK
button to select.
4
System
DVD-RAM(VR)
Clock Set
Install
√
√
√
√
√
CM Skip Time
AV1 Output
NICAM
: 15 Sec
: Video
: On
MOVE
OK
RETURN
EXIT
Move the selection arrow to “Auto
Setup” then press √ button to select
from the following options:
5
Install
DVD-RAM(VR)
Auto Setup
√
√
Manual Setup
MOVE
OK
RETURN
EXIT
26- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 27
Press the †… buttons to select a PR
(program) you wish to edit, delete, or
swap. And then press OK button.
Manual Setup
6
7
Select Edit, Delete, or Swap.
You can add preset channel that Auto Channel Search
missed. And you can delete a channel you wish to
remove.
Manual Setup
Edit
DVD-RAM(VR)
PR
01
CH
5
Name
----
Edit
Delete
02
03
04
05
06
07
---
---
---
---
---
---
----
----
----
----
----
----
Swap
√
√
√
√
√
With the unit in Stop mode, press the
MOVE
OK
RETURN
EXIT
1
2
MENU button on the remote.
• In case of Edit : you can add or edit PR(program)
Using the †… buttons, move the
selection bar to “Setup” then press OK
button to select.
Manual Setup
PR
01
CH
- - -
- - - -
Name
MFT
Setup
DVD-RAM(VR)
System
√
√
√
√
√
Done
OK
Language
Audio
MOVE
Video
Parental Control
- CH : Tune the channel using œ √ buttons or number
buttons.
MOVE
OK
RETURN
EXIT
- MFT : You can tune up the channel frequency better
using œ √ buttons.
Using the †… buttons, move the
selection bar to “System” then press OK
button to select.
- Name : Display station name automatically detected in
broadcasting signal. If not detected, you can
edit name by using †…œ √ buttons.
3
4
• In case of Delete : the channel information of selected
PR(program) will be removed.
Using the †… buttons, move the
selection bar to “Install”, then press OK
button to select.
• In case of Swap : You can swap the channel
information of two PR(program). For example, if you
wish to swap PR2 and PR5, select swap at PR2, then
press OK button or √ button at PR5.
System
DVD-RAM(VR)
Clock Set
Install
√
√
√
√
√
CM Skip Time
AV1 Output
NICAM
: 15 Sec
: Video
: On
MOVE
OK
RETURN
EXIT
Move the selection bar to “Manual
Setup”, then press OK button to select.
5
Install
DVD-RAM(VR)
Auto Setup
√
√
Manual Setup
MOVE
OK
RETURN
EXIT
English -27
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 28
Select the desired time using the …†
buttons, then press the √ or OK
button.
CM Skip Time Setting
5
6
System
DVD-RAM(VR)
Clock Set
Install
√
√
√
√
√
CM Skip Time
AV1 Output
NICAM
:
15 Sec
30 Sec
:
When a program recorded on a DVD-RAM, a DVD-RW,
or a DVD-R is played, the unit can be set to automati-
cally skip a portion of the program corresponding to a
CM(commercial) Skip Time set by the user.
The program can then be played from a point after the
CM Skip Time. If the CM Skip button is pressed while a
DVD disc is played, an instant skip function is
performed for the set CM Skip Time.
60 Sec
:
MOVE
OK
RETURN
EXIT
If you press the CM SKIP button, the
section corresponding to the set time is
skipped, and then the next section is
played.
With the unit in Stop mode, press the
1
2
MENU button on the remote control.
CM Skip
Select Setup using the …† buttons, then
press the √ or OK button.
You can't use the Setup functions while playing a
disc.
Setup
DVD-RAM(VR)
System
√
√
√
√
√
Language
Audio
Video
Parental Control
GG
CM Skip can be performed only during
normal playback.
NOTE
MOVE
OK
RETURN
EXIT
GG
When the time set is less than a
remaining time of a current title: The next
title is played from the beginning.
Select System using the …† buttons,
then press the √ or OK button.
System menu will be displayed.
GG
When the time set is less than a
remaining time of a play list, the next
scene is played.
3
4
Setup
DVD-RAM(VR)
GG
CM Skip is not performed with respect to
a still picture.
System
√
√
√
√
√
Language
Audio
GG
When a set time is less than a remaining
Video
time of a scene, a last title, or a last track
that is displayed currently, a prohibition
mark appears.
Parental Control
MOVE
OK
RETURN
EXIT
GG
When the time set is less than the
remaining time of the currently displayed
track, title or scene, a prohibition mark
appears.
GG
CM Skip releases Repeat (including
Repeat A-B, Chapter, and Title).
Select CM Skip Time using the …† but-
tons, then press the √ or OK button.
GG
This may not operate with some
DVD-Video discs.
System
DVD-RAM(VR)
Clock Set
Install
√
√
√
√
√
CM Skip Time
AV1 Output
NICAM
: 15 Sec
: Video
: On
MOVE
OK
RETURN
EXIT
28- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 29
Setting Up NICAM Options
Setting Up Scart Jack
Options
NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language). NICAM programmes are always
accompanied by a standard mono sound broadcast and
you can select the desired sound by setting NICAM on
or off.
If you connect external device (VCR/satellite receiver/
cable box) or TV to DVD Recoder with Scart
Jack(21pin), you need to set this options.
With the unit in Stop mode, press the
1
2
3
MENU button on the remote.
With the unit in Stop mode, press the
Select “Setup” using †… buttons, then
press the √ or OK button.
1
2
MENU button on the remote.
Select “Setup” using †… buttons, then
press the √ or OK button.
Using the †… buttons, move the
selection bar to “System” then press √
or OK button to select.
Setup
DVD-RAM(VR)
System
√
√
√
√
√
Setup
DVD-RAM(VR)
Language
Audio
System
√
√
√
√
√
Language
Audio
Video
Parental Control
Video
Parental Control
MOVE
OK
RETURN
EXIT
MOVE
OK
RETURN
EXIT
Using the †… buttons, move the
selection bar to “System” then press √
or OK button to select.
3
Using the †… buttons, move the
selection bar to “AV1 Output” then press
√ or OK button to select.
4
5
System
DVD-RAM(VR)
Clock Set
Install
√
√
√
√
√
System
DVD-RAM(VR)
Clock Set
Install
√
√
√
√
√
CM Skip Time
AV 1 Output
NICAM
: 15 Sec
: Video
: On
CM Skip Time
AV 1 Output
NICAM
: 15 Sec
: Video
: On
MOVE
OK
RETURN
EXIT
MOVE
OK
RETURN
EXIT
Using the †… buttons, move the
selection bar to “NICAM” then press √
or OK button to select.
4
5
Using the †… and OK buttons, select
“Video” or “RGB” to suit the AV terminal
of TV.
• AV2 input option will be set automatically according to
the signal of external device (VCR/satellite
receiver/cable box).
Using the †… and OK buttons, select
“On” or “Off”.
• Off: Only set at this position to record the standard
mono sound during a NICAM broadcast if the stereo
sound is distorted due to inferior reception conditions.
• On: NICAM mode
English -29
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 30
Use the …† buttons to select the
desired sub menu and press the OK or
√ button.
Setting Up the Language
Features
4
5
GGG Audio Language: For the speaker sound.
GGG Subtitle Language: For the disc subtitles.
GGG Disc Menu Language: For the disc menu
contained on the disc
If you set the player menu, disc menu, audio and
subtitle language in advance, they will come up
automatically every time you watch a movie.
If the selected language is not recorded on the disc,
the original pre-recorded language is selected.
GGG On-Screen Menu: For the on-screen menu of
your DVD Recorder
Select the desired Language using the
…† buttons, then press the √ or OK
button.
With the unit in Stop mode, press the
1
2
MENU button on the remote control.
Language
DVD-RAM(VR)
Audio
:
Original
Subtitle
: English
Français
:
Deutsch
Disc Menu
Select “Setup” using the …† buttons,
then press the √ or OK button.
You can't use the Setup functions during disc
playback.
On-Screen Menu :
Español
Italiano
Nederlands
Korean
MOVE
OK
RETURN
EXIT
Setup
DVD-RAM(VR)
System
√
√
√
√
√
Language
Audio
GG
GG
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
Video
NOTE
Parental Control
The selected language will only appear if
it is supported on the disc.
MOVE
OK
RETURN
EXIT
Select “Language’ using the …†
buttons, then press the √ or OK button.
Language setup menu will be displayed.
3
Setup
DVD-RAM(VR)
System
√
√
√
√
√
Language
Audio
Video
Parental Control
MOVE
OK
RETURN
EXIT
Language
DVD-RAM(VR)
Audio
: Original
√
Subtitle
Disc Menu
: Automatic
: English
√
√
√
On-Screen Menu : English
MOVE
OK
RETURN
EXIT
30- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 31
Audio Options
Setting Up the Audio
Options
Digital Output
1. PCM : Select this when you have no equipment that
can decode Dolby Digital (or MPEG-2) signal.
When you play Dolby Digital (or MPEG-2)
sound track, the digital output are
Allow you to setup the Audio device and sound status
depending on the audio system in use.
converted to PCM Stereo.
2. Bitstream : Output Dolby Digital (or MPEG-2) audio as
bitstream. Select this when your AV
receiver or AV amplifier have Dolby Digital
(or MPEG-2) Decoder.
With the unit in Stop mode, press the
1
2
3
MENU button on the remote.
GG
Digital output setting is equally applied to
both Dolby Digital and MPEG-2 audio.
NOTE
LPCM sound track is always outputted as
PCM. It has no relation with Digital Output
setting.
Select “Setup” using †… buttons, then
press the √ or OK button.
GG
Be sure to select the correct Digital
Output or you will hear no sound or loud
noise.
Select “Audio” using †… buttons, then
press the √ or OK button. Audio setup
menu will be displayed.
DTS
Setup
DVD-RAM(VR)
System
√
√
√
√
√
1. Off :
Doesn’t output DTS signal.
Language
Audio
Select this when your AV receiver or AV
amplifier does not have DTS decoder.
Outputs DTS Bitstream via digital output
when you play DTS track.
Video
Parental Control
2. On :
Select this only when your AV receiver (or
AV amplifier) have DTS decoder.
MOVE
OK
RETURN
EXIT
GG
When DTS soundtrack is played, sound
does not output from Analogue Audio
Output.
Use †… buttons to select the desired
NOTE
4
sub menu and press the OK or √ button.
Audio
DVD-RAM(VR)
Digital Output
DTS
PCM
√
Dynamic Compression
Bitstream
Dynamic Compression : On
Dynamic Range Compression : This is only active
when a Dolby Digital signal is detected.
- On : When the Movie-soundtracks are played at low
volume or from smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
- Off : You can enjoy the movie with standard Dynamic
Range.
MOVE
OK
RETURN
EXIT
Use the †… buttons to select the
desired item. Then press the √ or OK
button.
5
GG
Press the RETURN or œ button to return
to the previous menu. Press the MENU
button to exit the menu.
NOTE
English -31
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 32
Display(Video) Options
Setting Up the
Display(Video) Options
This function depends on disc type. It may not work for
some disc types.
TV Aspect
This function allows you to setup the TV screen
settings.
Depending on the type of television you have, you may
want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box : Select when you want to see the
total 16:9 ratio screen DVD
supplies, even though you have a
TV with a 4:3 ratio screen.
Black bars will appear at the top
and bottom of the screen.
With the unit in Stop mode, press the
• 4:3 Pan - Scan : Select this for conventional size TV
when you want to see the central
portion of the 16:9 screen. (Extreme
left and right side of movie picture
will be cut off.)
1
2
MENU button on the remote.
You can’t use the Setup functions during playback.
Select “Setup” using †… buttons, then
• 16:9 Wide :
You can view the full 16:9 picture on
your widescreen TV.
press the √ or OK button.
Setup
DVD-RAM(VR)
System
√
√
√
√
√
3D Noise Reduction (motion adaptive noise
reduction)
Language
Audio
Video
Parental Control
Video
DVD-RAM(VR)
TV Aspect
:
4:3 Letter Box
√
3D Noise Reduction
Front Display
Off
On
MOVE
OK
RETURN
EXIT
Select “Video” using †… buttons, then
press the √ or OK button.
MOVE
OK
RETURN
EXIT
3
4
Video setup menu will be displayed.
GG On : Provides a cleaner picture through noise
reduction (for recording).
GG Off : Normal
Use †… buttons to select the desired
sub menu and press the OK or √ button.
Video
DVD-RAM(VR)
Front Display
Adjust the brightness of the unit’s front panel display.
TV Aspect
:
4:3 Letter Box
√
√
√
3D Noise Reduction
Front Display
: Off
: Auto Dim
Video
DVD-RAM(VR)
TV Aspect
:
4:3 Letter Box
√
√
3D Noise Reduction
Front Display
: Off
Bright
MOVE
OK
RETURN
EXIT
Dim
Auto Dim
Use the †… buttons to select the
desired item. Then press the √ or OK
button.
MOVE
OK
RETURN
EXIT
5
GGGGG
Auto Dim : Makes the Front Panel Display dim
automatically when playing a DVD.
GGG Dim : Makes the Front Panel Display dim.
GGG Bright : Makes the Front Panel Display bright.
GG
Press the RETURN or œ button to return
to the previous menu. Press the MENU
button to exit the menu.
NOTE
32- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 33
Select “Rating Level” you want using
†… buttons, then press the √ or OK
button.
• For example, if you select up to Level 6, discs that
contain Level 7, 8 will not play. Larger number indicates
the program is more intended to adult use only.
6
Setting Up the Parental
Control
Parental Control
DVD-RAM(VR)
The Parental Control function works in conjunction with
DVDs that have been assigned a rating which helps
you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
Level 8 Adults
Password
Level 7
Rating Level
Change Password
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids
MOVE
OK
RETURN
EXIT
With the unit in Stop mode, press the
1
2
3
MENU button on the remote.
GG
GG
Press the RETURN or √ button to return
to the previous menu. Press the MENU
button to exit the menu.
Select “Setup” using †… buttons, then
press the √ or OK button.
NOTE
Refer to Troubleshooting if you forget
your password.
Select “Parental Control” using †…
buttons, then press the √ or OK button.
Setup
DVD-RAM(VR)
System
√
√
√
√
√
Language
Audio
About the Change Password;
Video
Parental Control
Select “Change Password” using †…
MOVE
OK
RETURN
EXIT
1
buttons, then press the √ or OK button.
• The ‘Enter the password.’ message will be displayed.
Enter the 4-digit password using the 0 to
9 buttons on the remote.
Enter the 4-digit password using the 0 to
9 buttons on the remote.
• The ‘Confirm the password.’ message will be dis-
played.
4
5
2
• The ‘Confirm the password.’ message will be displayed.
Enter your password again.
Parental Control
DVD-RAM(VR)
Enter your password again using the 0
to 9 buttons on the remote.
3
Create the password
GG
Press the RETURN or œ button to return
to the previous menu. Press the MENU
button to exit the menu.
NOTE
OK
RETURN
EXIT
NUMBER
Select “Password On/Off” using √ and
†… buttons.
Parental Control
DVD-RAM(VR)
Password
Off
On
MOVE
OK
RETURN
EXIT
English -33
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 34
Before Recording
This unit can record on various types of discs. Before
recording, read the following instructions and select the
disc type according to your preference.
Recording
Recordable discs
This recorder can record on the following discs.
This section shows various DVD recording
methods.
DVD-RAM
DVD-RW
DVD-R
G
G
DVD-RWs and DVD-RAMs are rewritable.
DVD-Rs are non-rewritable
Compatibility between Samsung Recorder and
Other Company’s Recorder
Disc Types Recording Recording Device Finalizing Additional Recording
format
in Thoshiba Recorder
Recordable
Thoshiba
X
X
DVD-RAM
DVD-RW
VR Mode
Recordable
Other Company
finalized
not finalized
finalized
Not recordable
Recordable
Not recordable
Recordable
Thoshiba
VR Mode
Other Company
not finalized
finalized
not finalized
Not recordable
Recordable
Thoshiba
V Mode
V Mode
Not recordable
Not recordable
finalized
not finalized
finalized
Other Company
Thoshiba
Not recordable
Recordable
not finalized
DVD-R
Not recordable
finalized
Other Company
Not recordable
not finalized
Before Recording ...........................................34
Recording the current TV program
you are watching............................................35
GG
Finalise
- This closes the DVD-R/RW so no
additional recording can be done.
NOTE
Recording from external equipment
you are watching............................................38
GG
Unfinalise
- This allows additional recording on a
finalised DVD-RW disc.
- A DVD-RW disc that has been recorded
by DAO (Disc At Once) mode in a PC
cannot be unfinalised.
- A DVD-RW disc that has been recorded
in Video Mode of a different maker’s
recorder cannot be unfinalised.
- A DVD-R disc cannot be unfinalised.
Reviewing Images Being Recorded(Time Slip)..39
Making a One Touch Recording (OTR)..........40
Making a Standard Timer...............................41
Flexible Recording (only for Timer recording) ..42
Editing a Standard Timer................................42
Deleting a Timer Recording Entry..................43
Using the Video Plus+ Feature .....................44
Video Plus+ Extend........................................45
Recording the Scheduled Record List ...........46
34- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_14~35 8/31/04 10:28 AM Page 35
Recording Formats
Recording Mode
When you insert an unused disc, the following message
Select one of four recording modes by pressing the
REC MODE button repeatedly while the unit is in Stop
mode for the desired recording time and picture quality.
In general, picture quality improves as the recording
time decreases.
appears; Since available functions differ depending on
the disc type, select a disc that best fits your prefer-
ences.
DVD-RAM: Use after formatting the disc.
In FR Mode, picture quality is adjusted automatically so
that all images for the scheduled time can be recorded
onto the free disc space.
Unformatted Disc
Mode
Characteristic
Recording Times
Data Rates
Do you want to format this disc?
Yes
No
XP
Select when the
Approx. 1 hour
(high quality mode) video quality is
important.
about 8 Mbps
SP
Select to record in
Approx. 2 hours
about 4 Mbps
DVD-RW: When a blank disc is first inserted, the
message “Do you want to initialize this disc?” will
appear.
(standard quality mode) standard quality.
Select when a long
Approx. 4 hours
LP
recording time is
(long recording mode)
required.
When YES is selected, the mode will be formatted
in VR Mode.
about 2 Mbps
Select when a longer
recording time is
(extended mode)
required.
Approx. 6 hours
EP
about 1.2 Mbps
FR
for timer recording only Approx. 1 to 6 hours
Uninitialized Disc
Do you want to initialize this disc?
(Flexible Recording) see page 42.
about 1.2 to 8 Mbps
Yes
No
Unrecordable pictures
Pictures with copy protection cannot be recorded on
this DVD Recorder.
If you want to format in either VR Mode or Video
Mode, refer to Formatting a Disc on page 82.
When the DVD Recorder receives a copy guard signal
while recording, recording stops and the following
message appears on the screen.
Disc Manager
DVD-RW(VR)
Disc Name
:
√
Disc Protection
: Not protected
√
√
√
√
Choose the recording format fot DVD-RW.
DVD-VR
DVD-V
You cannot record copy protected movie.
MOVE
OK
RETURN
EXIT
DVD-R: Formatting DVD is unnecessary and only Video
Mode Recording is supported
Concerning Copy Control Signals
Broadcasts that contain copy control signals may have
one of the following three signal types, COPY-Free,
Copy-Once and Copy-Never. If you want to record a
copy-once type program, use DVD-RW with CPRM in
VR Mode and DVD-RAM.
DVD-RW( Video mode)/-R
G
This mode automatically creates chapters at specified
intervals during finalization.
Copy-Free
O
Copy-Once
-
Copy-Never
G
Simple editing (erasing titles/changing title name)
DVD-RW(Ver.1.1)
DVD-RW(Ver.1.1)
with CPRM
DVD-RW(VR mode)/-RAM
O*
-
G
This mode allows multiple editing functions (such as
deletion of the whole of a title, partial deletion of a
title, etc.)
O
O
O
O
VR mode
Video mode
-
DVD-R
G
Various editing options using a created Playlist
O*
DVD-RAM (Ver. 2.0)
Once “Copy Once” has been recorded, additional
recording cannot be performed.
This * marked parts are compatible with CPRM.
English -35
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_36~46 8/31/04 10:29 AM Page 36
About DISPLAY Key
Recording the current TV
program you are watching
Before you start
The DISPLAY function allows you to view the current
status and progress of playback and recording.
Depending on the kind of disc and status, the displayed
screen may be different.
Check that the disc has enough available space for the
recording. Adjust the recording picture quality mode.
Checking the available disc
space (Disc Information)
When recording on an used disc, make sure that there
is enough disc space for recording. With DVD-RWs or
DVD-RAMs, you can free up disc space by erasing
titles.
G
Press the DISPLAY button.
The disc information display window appears.
Items in the display differ depending on the disc type
or recording format.
2
1
3
DVD-RAM(VR)
Disc Name
Disc Info
Disc
Press the OPEN/CLOSE button and
Total Title
11
None
01:48 SP
Not Protected
PR 1 [Mono]
- -
4
5
6
Total Playlist
Recordable Time
Protection
Main Screen
PIP Screen
1
2
place a recordable disc on the disc tray.
7
8
Press the OPEN/CLOSE button to close
the disc tray.
Wait until “LOADING” disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to
format or not will be asked first. Make your selection,
then press OK.(See page 35)
01 JAN 2004 THU
12:00
9
1. Disc Type
2. Current information display status
3. Disc Name
4. Total Titles : Total number of titles
5. Total Playlist : Total number of Playlists
6. Recordable Time : The longest continuous
recording time in each of the recording
modes(approximate)
Unformatted Disc
Do you want to format this disc?
7. Main picture window: the name of the program in
the main picture
Yes
No
8. PIP window: the name of the program in the PIP
window
9. Date : Current date and time
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. Make your selection,
then press OK.(See page 35)
Uninitialized Disc
Do you want to initialize this disc?
Yes
No
36- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_36~46 8/31/04 10:29 AM Page 37
To pause recording
Press the PROG (
/
) or number
3
4
(
~
) buttons to select the current
Press the REC PAUSE button to pause a recording in
progress.
program you want to record.
G
Press the REC PAUSE button again to resume
recording.
You can switch channels by pressing the PROG
Press the REC MODE button repeatedly,
(or Press the REC MODE button and
then press the …† button) to select the
recording speed(quality).
G
(
/
) buttons while recording pauses.
To stop recording
GGSP GGLP GGEP GGXP
Press the STOP ( ) button to stop or finish a
recording in progress.
G
When using DVD-RAM/DVD-RW/DVD-R discs, the
message ‘Updating the information of disc.
Please wait for a moment’ is displayed.
Record Mode
SP
GG
You can not change the recording mode
and the PROG while recording.
NOTE
GG
GG
GG
GG
Recording will stop automatically if there
is no free space left for recording.
Press the REC button.
Up to 99 titles can be recorded onto a
disc.
5
Information concerning the channel is displayed on
the screen and then recording begins.
Recording will stop automatically if a copy
protected image is selected.
Recording
:
PR
1
[Mono]
DVD-RAM/DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.
GG
Do not use DVD-R authoring discs with
this unit.
To view the current status of the disc and progress of
recording : Press the DISPLAY button, and the
information about the disc will appear.
DVD-RAM(VR)
Disc Name
Disc Info
Total Title
15
2
Total Playlist
Recordable Time
Protection
03:00 SP
Not Protected
Main Screen
PIP Screen
24 APR 2004 SAT
Recording: PR 1 [Mono]
- -
12:00
Press the DISPLAY button once again.
Then you can check the information about the title
under recording.
DVD-RAM(VR)
Name
Recording Info
04/APR/2004 12:00
Recording Title
Created Time
Recording Time
24 APR 2004 SAT
15
04/APR/2004 12:00
00:02:05
12:00
English -37
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_36~46 8/31/04 10:29 AM Page 38
Press the REC button.
5
Recording from external
equipment you are
watching
To pause recording
Press the REC PAUSE button to pause a recording in
progress.
G
G
Press the REC PAUSE button again to resume
recording.
You can switch channels by pressing the PROG
Before you start
(
/
) buttons while recording pauses.
Check that the disc has enough available space for the
recording. Adjust the recording mode.
To stop recording
Press the STOP ( ) button to stop or finish a record-
ing in progress.
Press the OPEN/CLOSE button, and
place a recordable disc on the disc tray.
G
When using DVD-RAM/DVD-RW/DVD-R discs, the
message ‘Updating the information of disc.
Please wait for a moment’ is displayed.
1
2
Press the OPEN/CLOSE button to close
the disc tray.
Wait until “LOADING” disappears from the front panel
display.
GG
You can not change the recording mode
If an unused DVD-RAM disc is used, whether to
format or not will be asked first. (See page 35)
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 35)
and input source while recording.
NOTE
GG
GG
GG
GG
Recording will stop automatically if
there is no free space left for recording.
Up to 99 titles can be recorded onto a
disc.
Press the INPUT button to select the
input source according to the
connection you made.
The front panel display changes in the following
sequence:
Recording will stop automatically if a
copy protected image is selected.
3
4
DVD-RAM/DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.
GGPROG Number GGAV1 GGAV2 GGAV3 GGAV4 GGDV
GG
Do not use DVD-R authoring discs with
this unit.
If you connect a digital camcorder, press
the INPUT button to select DV.
Press the REC MODE button repeatedly,
(or Press the REC MODE button and
then press the …† button) to select the
recording speed(quality).
GGSP GGLP GGEP GGXP
Record Mode SP
38- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_36~46 8/31/04 10:29 AM Page 39
Reviewing Images Being
Recorded (Time Slip)
When the DISPLAY button is pressed again:
Information about playback will appear.
DVD-RAM(VR)
Name
Playing Info
04/APR/2004 12:00
PR7
15/15
Title
Created Time
04/APR/2004 12:00
- --:--:-- -
00:02:05
Length
Playing Time
Title Protection
24 APR 2004 SAT
Not Protected
12:00
This function lets you watch recently recorded
10-second images on the PIP screen while a recording
is in progress.
When the DISPLAY button is pressed once
again: Information about recording will
appear.
Press the TIME SLIP button during
1
DVD-RAM recording.
The time slip lamp on your DVD Recorder lights. The
recently recorded 10-second images are played back
on the PIP screen.
DVD-RAM(VR)
Name
Recording Info
04/APR/2004 12:00
Recording Title
Created Time
Recording Time
24 APR 2004 SAT
15
04/APR/2004 12:00
00:02:05
12:00
Press the STOP button to clear the time
slip function.
To stop a recording while the Time Slip function is
in process, press the STOP button twice. The first
press will stop playback of the Time Slip funtion.
The second press will stop recording.
2
G
The Time Slip function allows you to view a recorded
program through the PIP window at least 10 seconds
after recording starts. Playback and recording can be
done at the same time.
During the operation of Time Slip, playback related
buttons control the PIP window.
On the time slip screen, you can play, scan, or
perform other operations for the recorded program using
the playback related buttons.
G
G
GG
The Time Slip function operates only with
DVD-RAM.
NOTE
GG
The Time Slip function is not supported in
the DV recording mode.
- Press the
button to scan the recording in reverse
order, from end to the start.
- Press the
button to scan recently recorded 10-
second images.
When the DISPLAY button is pressed, cur-
rent
information about the disc will appear.
DVD-RAM(VR)
Disc Name
Disc Info
Total Title
15
2
Total Playlist
Recordable Time
Protection
03:00 SP
Not Protected
Main Screen
PIP Screen
24 APR 2004 SAT
Recording: PR 1 [Mono]
Playback
12:00
English -39
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_36~46 8/31/04 10:29 AM Page 40
To view the current status of the disc and progress
of recording : Press the DISPLAY button, and the
information about the disc will appear.
Making a One Touch
Recording (OTR)
DVD-RAM(VR)
Disc Name
Disc Info
Total Title
15
2
Total Playlist
Recordable Time
Protection
03:00 SP
Not Protected
Main Screen
PIP Screen
24 APR 2004 SAT
Recording: PR 1 [Mono]
- -
You can set the DVD Recorder to record in 30-minute
increments by pressing the REC button.
12:00
Press the DISPLAY button once again.
Then you can check the information about the title
under recording.
If you want to record a TV channel,
1
2
use the PROG (
/
) buttons or
DVD-RAM(VR)
Name
Recording Info
04/APR/2004 12:00
number buttons to select a desired
channel.
Recording Title
Created Time
Recording Time
24 APR 2004 SAT
15
If you want to record through a
connected external component, press
the INPUT button to select an
appropriate external input
(AV1, AV2, AV3, AV4 or DV).
04/APR/2004 12:00
00:02:05
12:00
G
TV PROGRAM: 1 to 99
30 seconds before the recording is done,the
message,which asks whether you want the
recorder to power off when the recording is done,
will appear on your screen.
Press the REC button, and then press
the button once again during recording.
“OTR” appears on the front panel display.
OTR Mode
0:30
OTR is going to be ended soon
and power will be turned off automatically.
Press [OK] button to continue to use DVD Recorder.
OK
Press the REC button to adjust the
recording time.
To stop recording
3
Press the STOP ( ) button. The message “Do you
want to stop recording?” is displayed.
GG0:30 GG1:00 GG...5:30 GG6:00 GG0:00
GG
The timer counter decreases minute 6:00
to 0:00, then the DVD Recorder stops
recording.
NOTE
Do you want to stop recording?
Yes
No
G
Press the œ √ buttons to select Yes, and then press
the OK button.
40- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_36~46 8/31/04 10:29 AM Page 41
Set timer recording option.
• The Timer Recording screen is displayed.
Fill the input items using the arrow buttons and
number buttons.
5
Making a Standard Timer
œ √ : Moves to the previous/next item,
…† : Sets a value.
• Source : The video input source (AV1, AV2, AV3
AV4 or DV), or the broadcasting
channel you want to make a timer
recording from.
• Date : Set the recording day. (day/month)
• Start/End Time : Start and end time of the timer
recording.
Before you start
1. Check the antenna cable is connected.
2. Check the remaining time of the disc.
3. Check the date and time are correct.
Make sure the Clock has been set (Setup - System
Setting) before you proceed with a timer recording.
• Type (Recording cycle).
Once : Records once.
Weekly : Records at a set time every week.
Daily : Records at a set time every day.
• V/P : VPS(Video Programme System) or
PDC(Programme Delivery Control) function.
Press the MENU button.
1
- If you set this function on, you can control the
starting and ending time of recording by special
signal included in the broadcasting signal.
If a TV programme is shortened or starts earlier or
later than scheduled, this function synchronizes
the starting and ending time of recording with the
actual broadcasting time automatically.
- Set up the start-time EXACTLY according to the
published TV schedule. Otherwise the timer
recording will not take place.
Press the †… buttons to select
2
“Programme” and then press the OK or
√ button.
Programme
DVD-RAM(VR)
Video Plus+ Record
Standard Timer
√
√
Video Plus+ Record Extended : Off
√
- Do not select PDC or VPS unless you are sure
the programme you wish to record is broadcast
with PDC or VPS.
MOVE
OK
RETURN
EXIT
Press the †… buttons to select
“Standard Timer” and then press the OK
or √ button.
Mode (Recording Mode)
3
4
- FR : Select when you want to set video quality
automatically. It depends on the remaining time on
the DVD.
Press the †… buttons to select
“Scheduled Record List”, and then
press the OK or √ button.
- XP (high quality) : Select when video quality is important.
(Approx. 1 hour)
- SP (standard quality) : Select to record in standard
quality. (Approx. 2 hours)
Scheduled Record List
DVD-RAM(VR)
Remaining Recording Time 02:12 SP
- LP (low quality) : Select when a long recording time is
required.(Approx. 4 hours)
No. Source
Date
Start
End
Type
Mode V/P Edit
01 ---- ----- --:-- --:-- -- -- --
√
- EP (extended mode) : Select when a longer recording
time is required. (Approx.6 hours
about 1.2 Mbps)
MOVE
OK
RETURN
EXIT
Scheduled Record List
Remaining Recording Time 02:12 SP
DVD-RAM(VR)
No.
No. 01
it
01
Source
PR 01
JAN
√
02 Date01
√
Start
Type
V/P
12
:
00
End 14
:
00
Once
Off
Mode SP
MOVE
OK
RETURN
EXIT
English -41
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_36~46 8/31/04 10:29 AM Page 42
Press the OK button.
6
G
will appear on the front panel. It means that a
timer recording is registered.
Editing a Standard Timer
If you make a mistake
Press the œ √ button to select the item you want
to change.
If the timer settings overlap
The programs are recorded in order of priority.
If timer recording is set for the first program and
then again for the second program and both
programs overlap, the following message will
appear on the screen: “This setting is identical
with 1”The message shows that the first program
has priority. After recording of the first program is
complete, the second program starts being
recorded.
Follow these directions to edit the timer record list.
Press the MENU button.
1
To exit without saving the current setting
Press the MENU button.
To return to the previous menu
Press the RETURN button if you don’t want to set
a timer recording.
Press the †… buttons to select
2
“Programme” and then press the OK or
√ button.
Programme
DVD-RAM(VR)
Video Plus+ Record
Standard Timer
√
√
Turn the power off to finish the Timer
Recording setting. Timer Recording
will not work when the power is on.
7
Video Plus+ Record Extended : Off
√
G
will blink if disc is not inserted.
MOVE
OK
RETURN
EXIT
GG
The timer recording time may differ from
the set time depending on disc status
and overall timer recording status (for
example, recording times overlapping, or
when the previous recording ends within
2 minutes before the start time of the next
recording.)
NOTE
Press the †… buttons to select
“Standard Timer”, and then press the
OK or √ button.
3
4
GG
You can make the Timer Recording up to
12 programmes.
Scheduled Record List
DVD-RAM(VR)
Remaining Recording Time 02:12 SP
No. Source
01 PR 01
Date
01/ 01
Start
End
Type
Mode V/P Edit
12:00
14:00
Once
SP
Off
√
02 ---- ----- --:-- --:-- -- -- --
√
MOVE
OK
RETURN
EXIT
Flexible Recording
(for Timer recording only)
Press the †… buttons to select the num-
ber of the timer recording you want to
edit, and then press the OK or √ button.
G
The Edit and Delete items are displayed.
Scheduled Record List
DVD-RAM(VR)
Remaining Recording Time 02:12 SP
No. Source
01 PR 01
Date
01/ 01
Start
End
Type
Mode V/P Edit
Edit
In FR mode, the timer recording’s the video quality is
adjusted automatically so that all images for the
scheduled time can be recorded onto the free disc
space.
12:00
14:00
Once
SP
Delete
02 ---- ----- --:-- --:-- -- --
√
The FR mode recording setup is the same as Timer
Recording. When setting the mode in step5, set FR
mode.
MOVE
OK
RETURN
EXIT
42- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_36~46 8/31/04 10:29 AM Page 43
Press the †… buttons to select ‘Edit”,
and then press the OK button.
Deleting a Standard Timer
5
6
G
The Timer Recording screen is displayed.
Edit the items you want to modify.
See the “Making a Standard Timer” section for
more information on Timer Recording Input items.
Scheduled Record List
DVD-RAM(VR)
Remaining Recording Time 02:12 SP
No.
01
No. 01
it
Follow these directions to delete an entry from the timer
record list.
Date 01 JAN
√
Source PR 01
02
Start
00
End 14
√
12
:
:
00
Type
V/P
Once
Off
Mode SP
Press the MENU button.
1
MOVE
OK
RETURN
EXIT
Press the †… buttons to select “Programme”
Press the OK button to confirm the
edited setting.
2
3
and then press the OK or √ button.
Press the †… buttons to select
“Standard Timer”, and then press the
OK or √ button.
Scheduled Record List
DVD-RAM(VR)
Remaining Recording Time 02:12 SP
No. Source
01 PR 01
Date
01/ 01
Start
End
Type
Mode V/P Edit
12:00
14:00
Once
SP
Off
√
02 ---- ----- --:-- --:-- -- -- --
√
MOVE
OK
RETURN
EXIT
Press the †… buttons to select the num-
ber of the timer recording you want to
delete, and then press the OK button.
4
5
G
The Edit and Delete items are displayed.
Scheduled Record List
DVD-RAM(VR)
Remaining Recording Time 02:12 SP
No. Source
01 PR 01
Date
01/ 01
Start
End
Type
Mode V/P Edit
Edit
12:00
14:00
Once
SP
Delete
02 ---- ----- --:-- --:-- -- --
√
MOVE
OK
RETURN
EXIT
Press the †… buttons to select “Delete”,
and then press the OK button.
G
You will be prompted with the delete confirm
message such as ‘Do you want to delete
No.02?’.
Press the œ √ buttons to select “Yes”,
6
7
and then press the OK button.
G
The selected entry will be deleted from the list.
Press the MENU button after finishing
the operation. The menu screen will
disappear.
English -43
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_36~46 8/31/04 10:29 AM Page 44
Press the OK button.
3
G
The information concerning the programme is
displayed.
Using the Video Plus+
Feature
G
When using the Video Plus+ function for the
first time with stored stations, the programme
number flashes. This one time, you must enter
the PR number manually by pressing the
†… buttons.
Before presetting your DVD Recoder:
• Switch on both the television and your DVD
Recoder.
Scheduled Record List
DVD-RAM(VR)
Remaining Recording Time 02:12 SP
• Check that the date and time are correct.
Up to twelve programmes can be preset.
No.
No. 01
01
it
√
Source PR 01
Date 01 JAN
Start
Type
V/P
12
:
00
End 14
Mode SP
:
00
Once
Off
Press the Video Plus+ button.
- A message is displayed to allow you to enter the
Video Plus+ code.
1
MOVE
OK
RETURN
EXIT
Scheduled Record List
Remaining Recording Time 02:12 SP
DVD-RAM(VR)
Programme
DVD-RAM(VR)
No. Source
01 PR 01
Date
01/ 01
Start
End
Type
Mode V/P Edit
12:00
14:00
Once
SP
Off
√
02 ---- ----- --:-- --:-- -- -- --
√
Enter Video Plus+ Code number. [0~9]
MOVE
OK
RETURN
EXIT
OK
RETURN
EXIT
Using the MENU button.
If the programme and times are correct,
press the OK button.
G
Press the MENU button when the disc has
stopped.
4
5
G
Press the …† buttons to select “Programme”, and
then press the OK or √ button twice.
Turn the power off by pressing the
STANDBY/ON button to activate the
Timer Recoding setting.
Press the numeric buttons to enter the
code of the programme that you wish
to record in your television magazine.
2
Refer to page 41~43 if you wish to:
G
G
G
If you wish to correct the Video Plus+ code that
you are entering:
Press the œ button until the digit to be corrected
is cleared
6
G
Check whether the timer Recording has set
correctly or not.
G
Cancel a preset recording
Enter the correct digit
GG
The numbers next to each TV programme
listing in the magazines or newspapers
are Video Plus+ code numbers, which
allow you to programme your video-
recorder instantly with the remote control.
Enter the Video Plus+ code for the
programme you wish to record.
NOTE
GG
Video Plus+ is a trademark of Gemstar
Development Corporation. The Video
Plus+ system is manufactured under
licence from Gemstar Development
Corporation.
44- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_36~46 8/31/04 10:29 AM Page 45
Press the OK or √ button to set the
“Video Plus+ Record Extended” time by
increments of 10 minutes.
Video Plus+ Extended
4
5
Programme
DVD-RAM(VR)
Video Plus+ Record
Standard Timer
√
Off
Video Plus+ Record Extended
10
To prevent delays or overruns, DVD Recorder has a
function called Video Plus+ Extened allowing you to
extend the recording time by up to 60 minutes.
20
30
40
50
60
MOVE
OK
RETURN
EXIT
Press the MENU button in Stop Mode.
1
Press the MENU button after finishing
the operation.
Press the †… buttons to select
2
“Programme” and then press the OK or √
button.
Programme
DVD-RAM(VR)
Video Plus+ Record
Standard Timer
√
√
Video Plus+ Record Extended : Off
√
MOVE
OK
RETURN
EXIT
Press the †… buttons to select “Video
Plus+ Record Extended”.
3
Programme
DVD-RAM(VR)
Video Plus+ Record
Standard Timer
√
√
Video Plus+ Record Extended : Off
√
MOVE
OK
RETURN
EXIT
English -45
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_36~46 8/31/04 10:29 AM Page 46
Recording the Standard
Timer List
When the start time in the Scheduled record list
reaches while the set is in power off, the set will be
powered on and start the recording automatically.
When the scheduled recording is
1
operating, the programme being
recorded will not display on TV.
G
Press TV/DVD button if you want to see the
programmed being recorded on TV.
G
Press TV/DVD button again if you don’t want to see
the programmed being recorded on TV.
To stop Recording
Press the STOP( ) button, and the message that asks
whether to end recording or not will be displayed.
Do you want to stop recording?
Yes
No
G
G
When “Yes” is selected: Recording stops
When “No” is selected: Recording continues
GG
If disc space lacks or a signal for the
prevention of copy is received during
recording, recording will stop.
NOTE
You cannot record copy protected movie.
GG
If there is no free disc space even though
the start time arrives or the disc is not
recordable, recording will not operate.
(You can record after replacing the disc.)
46- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:29 AM Page 47
Before Playing
Read the following information before playing a disc.
Playback
Region code (DVD-Video only)
Both the DVD recorder and the discs are
coded by region. These regional codes must
match in order for the disc to play. If the codes
do not match, the disc will not play. The
Region Number for this recorder is described
on the rear panel of the recorder.
This section introduces basic functions of playback
and playback by disc type.
Disc types that can be played
Disc Types
Disc Logo Recorded content
Disc Shape
Max. Playing Time
Single sided(12cm)
Double sided(12cm)
Single sided(8cm)
Double sided(8cm)
Single sided(12cm)
Single sided(8cm)
Single sided(12cm)
Single sided(8cm)
Single sided(12cm)
Single sided(8cm)
240
480
80
160
74
20
-
-
-
-
DVD-VIDEO
AUDIO + VIDEO
AUDIO-CD
AUDIO
JPEG CD-R/RW
MP3 CD-R/RW
JPEG Images
MP3 Audio
1
(XP: Excellent Quality)
2 (SP: Standard Quality)
4 (LP: Long Playback)
6 (EP:Extended)
2 (XP: Excellent Quality)
4 (SP: Standard Quality)
Single-sided(12cm)
DVD-RAM
AUDIO + VIDEO
Double-sided(12cm) 8 (LP: Long Playback)
12 (EP:Extended)
1
2
(XP: Excellent Quality)
(SP: Standard Quality)
DVD-RW
DVD-R
AUDIO + VIDEO
AUDIO + VIDEO
12cm (4.7GB)
12cm (4.7GB)
4 (LP: Long Playback)
6 (EP:Extended)
1
2
(XP: Excellent Quality)
(SP: Standard Quality)
4 (LP: Long Playback)
DIGITAL OUT
D I G I T A L
Dolby Digital
6 (EP:Extended
)
DTS
Digital Audio
MP3
Discs that cannot be played
DVD-Video with a region number other than “2” or
“ALL”
12cm 2.6 GB and 5.2 GB DVD-RAM
3.9 GB DVD-R Disc for Authoring.
DVD-RAM, DVD-RW(VR mode) not recorded
following the Video Recording Standard
Unfinalised DVD-R,unfinalised DVD-RW(V mode)
recorded on other equipment.
●
Stereo
PAL broadcast
system in U.K,
France, Germany, etc.
●
●
●
●
●
●
Before Playing ..................................................47
Playing a Disc...................................................48
Playing an Audio CD/MP3 ..............................59
Playing a Picture CD........................................62
Playing the Title List .........................................63
DVD-ROM/DVD+RW/PD/MV-Disc/DivX Video Disc,
etc
CVD/SVCD/CD-ROM/CDV/CD-G/CD-I
English -47
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:29 AM Page 48
Place a disc gently into the tray with the
disc’s label facing up.
●●
This DVD recorder can only operate with
discs that are compatible with DVD-RAM
Standard Version 2.0.
2
3
NOTE
For DVD-RAM discs, insert the printed side facing up.
●●
Playback and/or recording may not work
for some types of discs, or when specific
operations, such as aspect ratio
adjustment, are being performed.
Information about the discs is written in
detail on the box. Please refer to this if
necessary.
Press the OPEN/CLOSE button to close
the disc tray.
●●●Your DVD Recorder closes the disc tray and plays
the disc automatically.
●●●The recorder does not play discs automatically after
the initial power on.
●●
Do not allow the disc to become dirty or
scratched. Fingerprints, dirt, dust,
scratches or deposits of cigarette smoke
on the recording surface may make it
impossible to use the disc for recording.
●●●
When the recorder is powered on and a disc is in
the tray, the unit will be activated and wait in stop
status.
●●●Press PLAY button to start playback.
●●●
If you insert a MP3 Disc, your DVD Recorder will
display the file list on the screen and start playing.
●●
●●
To protect a DVD-RAM/RW/R disc, from
damage, use a cartridge.
●●●When a JPEG disc is inserted, folders and a file list
are displayed.
DVD-RAM/RW/R discs may not be able to
play on some DVD players, depending on
the player, disc and the condition of the
recording.
●●●
To play automatically at the initial power on, power
on with PLAY button. Since then, the disc plays
automatically when you open and close the disc
tray.
Press the STOP button to stop playback.
4
●●
When you stop playing disc, the recorder
Playing a Disc
remembers where you stopped. So when
you press PLAY button again, it will pick
up where you left off. (unless the disc is
removed or the recorder is unplugged, or
if you press the STOP button twice.)
This function is only applicable to DVD-
VIDEO, DVD-RAM, DVD-RW, DVD-R or
audio CDs (CD-DA).
NOTE
●●
Do not move your DVD Recorder while
playing, as this may cause damage to the
disc.
CAUTION
●●
Make sure to press the OPEN/CLOSE
button to open or close the disc tray.
●●
Do not push the disc tray while it is being
opened or closed, as this may cause a
product malfunction.
●●
Do not place foreign materials on or in the
disc tray.
●●
Some functions may perform differently or
be disabled depending on the disc type.
If this occurs, refer to the instructions
written on the disc case.
Press the OPEN/CLOSE button.
The tray opens.
1
●●
Be especially careful that children's
fingers are not caught between the disc
tray and the tray chassis when it closes.
48- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:29 AM Page 49
Using the Search Functions
Using the Disc & Title Menu
Some type of discs contain a dedicated menu system
that allows you to select special functions for the title,
such as chapters, audio tracks, subtitles, film previews,
information on characters, etc.
For DVD-VIDEO discs
Press the DISC MENU button to enter
1
2
the disc menu of the disc.
Searching through a Chapter or Track
During play, press the SEARCH (
●● Move to the setup menu related to the playback
operation.
●●●You can select the audio languages and the
subtitles provided by the disc.
Press the TITLE MENU button to move
to the title menu of the disc.
)
●●●Use this button if the disc contains more than one
1
button on the remote control.
title. Some type of discs may not support the title
menu function.
Fast X 2 ●
Fast X 8 ●
Fast X 32 ●
Fast X 2 ●
Fast X 8
Fast X 4 ●
DVD-VIDEO/
DVD-RAM/
DVD-RW/DVD-R
AUDIO
Fast X 16 ●
Fast X 128
Fast X 4 ●
For DVD-RAM/RW/R discs
CD(CDDA)
Press the TITLE LIST button to move to
●
●
You can scan the program in reverse.
1
the Title List.
To return to normal speed playback, press the
button.
When you press and hold the SEARCH button
●●●●●●
Title List: Title refers to a recorded video
(
), playback is done at the default speed of 4X.
stream. Title List shows a list to
help you select a title. Since the
title list consists of the informa-
tion on stream that is actually
recorded, if one title is deleted,
that title cannot be played
again.
NOTE
If you release the SEARCH button, playback is
performed at a normal speed.
●
The speed marked in this function may be different
from the actual speed of playback.
●●●●●●●
●●
Play List: This refers to a unit of play-
back, which is made by select-
ing a desired scene in the entire
Title List. When one playlist is
played, only the scene selected
by the user will play and then
stop. Since only the information
necessary for playing a desired
scene is included in a playlist,
even if that playlist is deleted,
the original stream will not be
No sound is heard during Scan(Search)
mode.
NOTE
English -49
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:29 AM Page 50
About QUICK
Skipping Chapters or Tracks
●
During play, you can search quickly
through a chapter or track.
During play, press the SKIP (
button on the remote control.
)
1
●
If you press the ●œœ button,
The QUICK function allows you to easily search for a
desired scene by accessing title, chapter, track, and
time. You can also change the subtitle and audio
settings and set some features including Repeat, Angle,
and Zoom.
it moves to the beginning of the chapter or track or
marker(DVD-RAM, DVD-RW(VR mode)).
Pressing the button once again within 3 seconds
returns to the beginning of the previous chapter or
track or marker(DVD-RAM, DVD-RW(VR mode)).
●
If you press the √√●●●button,
Moving to a scene directly using QUICK
it moves to the next chapter or track or marker
(DVD-RAM,DVD-RW(VR mode)).
●
If you want to move to a title, a chapter
or a track to find a desired scene.
Slow Motion Play
In pause or step mode, press the SEARCH
Press the QUICK button during
1
(
) button on the remote control.
1
2
3
playback.
●
●
●
If you press the √√ button,
DVD-VIDEO
1/10
Slow 1/8 ●
Slow 1/4 ●
Slow 1/2
1/40
00:01:45
Off
If you press the œœ button,
ENG
Off
D
5.1CH
Slow 1/8 ●
Slow 1/4 ●
Slow 1/2
1/1
Off
MOVE
CHANGE
To return to normal speed playback,
press the button.
Press and hold the SEARCH (
) button during
pause, and the disc will play slowly at a 1/4 speed. If
the button is released, the pause operation will resume.
Press the …† buttons to select the
“Title, Chapter or Track”.
●●
The speed marked in this function may be
DVD-VIDEO
1/10
different from the actual speed of
playback.
NOTE
1/40
00:01:45
Off
ENG
Off
D
5.1CH
1/1
Off
MOVE
CHANGE
Step Motion Play
Press the
control.
button on the remote
1
Press the œ √ buttons or numerical
(0~9) buttons to select the desired
scene.
●
Each time the button is pressed, a new frame will
appear.
Then, press the OK button.
When
is pressed, the previous frame will be
activated.
When
is pressed, the next frame will be
activated.
●
To return to normal speed playback, press the
button.
50- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:29 AM Page 51
●
If you want to move to a desired time to
help you find a scene.
Using the Repeat Function
Press the QUICK button during
1
2
playback.
DVD-VIDEO
1/10
1/40
00:01:45
Off
ENG
Off
D
5.1CH
Playing Repeatedly(Repeat Playback)
1/1
Off
MOVE
CHANGE
Using the REPEAT button
Press the REPEAT button.
Press the …† buttons to select the
“Time”.
1
DVD-VIDEO
1/10
1/40
00:01:45
Off
Repeat
Off
ENG
Off
D
5.1CH
1/1
Off
MOVE
NUMBER
Enter the time in the sequence of hours,
minutes, and seconds using the number
buttons and then press the OK button.
3
Press the REPEAT button or press the
…† buttons to select the “Title or
Chapter” you want to play repeatedly.
Press the OK button.
2
●●
This may not work for some discs.
When an audio CD(CD-DA) or a MP3
disc is inserted, according to a disc type,
the information display may not be
appear.
NOTE
Repeat
Title
●●
The Time Search function does not
operate in some discs.
●●
To make the screen disappear, press the
QUICK again
Chapter : Repeats the chapter that is playing.
Title : Repeats the title that is playing.
- To return to normal playback -
Press the …† buttons to select “Off”
3
and press the OK button or press the
REPEAT button.
Press the CANCEL button to return to normal
playback.
English -51
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 52
Press the REPEAT button repeatedly to
select the “Track or Disc” you want to
play repeatedly.
2
Using the QUICK button
Music
CD
Press the QUICK button.
Repeat
01. TRACK
:
Track
Play Option
:
Normal
1
1
00 52
:
01. TRACK
02. TRACK
03. TRACK
04. TRACK
05. TRACK
06. TRACK
1
2
3
4
5
6
4:39
4:31
4:30
3:53
4:23
4:24
DVD-VIDEO
1/10
1/40
01/12
00:01:45
Off
ENG
Off
D
5.1CH
MOVE
OK
1/1
Off
MOVE
CHANGE
To return to normal playback
Press the REPEAT button repeatedly to
select “Off”.
Press the CANCEL button to return to normal
playback.
Press the …† buttons to select “Repeat”
and press the œ √ buttons to select the
“Title or Chapter” you want to play
repeatedly.
3
2
DVD-VIDEO
1/10
1/40
00:01:45
Off
ENG
Title
1/1
D
5.1CH
Using the QUICK button
Press the QUICK button.
Off
MOVE
CHANGE
1
2
3
Repeat is highlighted.
Music
CD
Repeat
01. TRACK
:
Off
Play Option
:
Normal
Press the OK button.
1
00 : 52
3
To make the screen disappear, press the QUICK or
RETURN button. Repeat play allows you to repeat a
title or chapter.
01. TRACK
02. TRACK
03. TRACK
04. TRACK
05. TRACK
06. TRACK
1
2
3
4
5
6
4:39
4:31
4:30
3:53
4:23
4:24
01/12
●●
DVD-RAM, DVD-RW(VR mode), unfi-
nalised DVD-R and unfinalised DVD-RW
(Video mode) do not repeat a chapter.
MOVE
OK
RETURN
NOTE
Press the OK button.
Playing Repeatedly(Repeat Playback)
Repeat
Track
Using the REPEAT button
Press the REPEAT button.
1
Press the REPEAT button or …† but-
tons to select the “Track or Disc” you
want to play repeatedly. Press the OK
button.
For MP3 discs, you can select “Track,
Folder or Disc”.
Music
CD
Repeat
01. TRACK
:
Off
Play Option
:
Normal
1
00 : 52
01. TRACK
02. TRACK
03. TRACK
04. TRACK
05. TRACK
06. TRACK
1
2
3
4
5
6
4:39
4:31
4:30
3:53
4:23
4:24
01/12
MOVE
OK
52- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 53
- To return to normal playback -
- To return to normal playback -
Press the REPEAT(A-B) button
4
Press the REPEAT button repeatedly to
4
select “Off”.
repeatedly to select “Off”.
Press the CANCEL button to return to normal
playback.
Using the QUICK button
Playing a Certain section Repeatedly(A-B Repeat Playback)
Press the QUICK button.
1
DVD-VIDEO
1/10
1/40
00:01:45
Off
ENG
Off
D
5.1CH
Using the REPEAT A-B button
Press the REPEAT A-B button.
1/1
Off
MOVE
CHANGE
1
Repeat A-B
Off
Press the …† buttons to select “Repeat”
and press the √ button to select the “A-B”.
2
DVD-VIDEO
1/10
1/40
00:01:45
Off
ENG
A-B
1/1
D
5.1CH
Off
MOVE
OK
Press the REPEAT A-B button repeated-
ly to set start point A.
2
3
Repeat A-B
A-
Press the OK button.
3
4
Press the OK or REPEAT A-B button at
the point where you want the repeat play
to start (A) and press it again at the
point where you want the repeat play to
stop (B).
Repeat playback of the A-B section starts.
Press the OK button again to set end
point B.
Repeat playback of the A-B section starts.
- To return to normal playback -
Select “Off” on the Repeat item.
Press the CANCEL button to return to normal
playback.
Repeat A-B
A-B
●●
If you set point (B) before five seconds
has lapsed, the prohibition mark ( ) will
appear.
NOTE
●●
CDs do not support the Repeat A-B
function.
English -53
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 54
Selecting the Subtitle
Selecting the Audio language
Subtitle languages may not work depending on the disc
type. This is only available during playback.
Audio languages may not work depending on the disc
type. This is only available during playback.
Using the SUBTITLE button
Press the SUBTITLE button during
Using the AUDIO button
Press the AUDIO button during play-
back.
1
2
playback.
1
2
Subtitle
Off
Audio
ENG Dolby Digital 5.1CH
Press the SUBTITLE button or …†
buttons to select the desired subtitle
language.
Press the AUDIO button or …† buttons
to select the desired audio language.
Using the QUICK button
Press the QUICK button during
Using the QUICK button
Press the QUICK button during
1
playback.
1
playback.
DVD-VIDEO
1/10
DVD-VIDEO
1/10
1/40
00:01:45
Off
1/40
00:01:45
Off
ENG
Off
D
5.1CH
ENG
Off
D
5.1CH
1/1
Off
1/1
MOVE
CHANGE
Off
MOVE
CHANGE
Press the …† buttons to select
Press the …† buttons to select “Audio”
and press the œ √ buttons to select the
desired audio language.
2
“Subtitle” and press the œ √ buttons to
select the desired subtitle language.
2
DVD-VIDEO
1/10
1/40
DVD-VIDEO
1/10
00:01:45
ENG
1/40
ENG
Off
D
5.1CH
00:01:45
Off
1/1
ENG
Off
D
5.1CH
Off
MOVE
CHANGE
1/1
Off
MOVE
CHANGE
●●
●●
●●
The subtitle display may be different
depending on the disc type.
NOTE
●●
●●
Audio languages may be different
because they are disc-specific.
If the subtitles overlap, disable the caption
function on your TV.
NOTE
Some discs allow you to select the audio
language for the disc menu only.
Some discs allow you to select the lan-
guage for the disc menu only.
54- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 55
Changing the Camera Angle
Zooming-In
When a DVD-VIDEO contains multiple angles of a
particular scene, you can select the Angle function.
This is only available during playback.
Press the QUICK button during
playback or pause.
1
DVD-VIDEO
1/10
1/40
Press the QUICK button during play-
back.
00:01:45
Off
1
2
ENG
Off
D
5.1CH
1/1
DVD-VIDEO
1/10
Off
MOVE
CHANGE
1/40
00:01:45
Off
ENG
Off
D
5.1CH
1/3
Off
Press the …† buttons to select “Zoom”,
and then press the OK button. ( ) will
be displayed.
MOVE
CHANGE
2
3
DVD-VIDEO
1/10
Press the …† buttons to select “Angle”
and press the œ √ buttons or number
buttons to select the desired angle.
1/40
00:01:45
Off
ENG
Off
D
5.1CH
1/1
DVD-VIDEO
1/10
Off
MOVE
CHANGE
1/40
00:01:45
Off
ENG
Off
D
5.1CH
1/3
Press the …† œ √ buttons to move to
the area you want to enlarge.
Off
MOVE
CHANGE
●●
●●
This function is disc-dependent, and may
not work on all DVDs.
NOTE
This function does not work when a DVD
has not been recorded with a multi-cam-
era angle system.
Press the OK button. The screen will be
enlarged to twice the normal size.
If you press the OK button again after the screen was
enlarged to twice the normal size, the screen size will
be enlarged to four times the normal size.
4
●●normal size ●●2X ●●4X ●●2X
●●
When recording is done in the EP mode,
the Zoom function will not be supported.
NOTE
English -55
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 56
To view the current status and progress of playback :
Press the DISPLAY button.
Using PIP(Picture in Picture)
The PIP function allows you to view a sub screen
together with the main screen.
You can view TV while playing a DVD disc.
DVD-VIDEO
Title
Chapter
Info
1/10
1/40
Playing Time
Main Screen
PIP Screen
24 APR 2004 SAT
00:01:10
Playback
PR 1 [Mono]
Press the PIP button.
The current disc is played in the PIP screen located at
the bottom right of the screen.
12:00
1
Deactivating PIP
Press the PIP button repeatedly to select
Off.
3
●●Playback ●●Input ●●Off
PIP Mode
Playback
PIP Mode
Off
Input
Playback
Playback
To view the current status and progress of playback :
Press the DISPLAY button.
●●
●●
You can not use PIP function, when you
play MP3 files and CDs.
NOTE
DVD-VIDEO
Title
Chapter
Playing Time
Main Screen
PIP Screen
24 APR 2004 SAT
Info
1/10
1/40
00:01:10
PR 1 [Mono]
Playback
You cannot use PIP function when the
screen has highlight information, and PIP
will go off automatically.
12:00
Using Last Mark
Press LAST MARK key on Front Panel during playback.
Current scene will be memorized to the disc.
Switching between the PIP and the main screens
Press the PIP button again.
(VR mode)
2
The main and PIP screen will be switched.
The input source is played in the PIP screen located
at the bottom right of the screen.
Last Mark
PIP Mode
Input
When the Power is back On from Power Off status or
disc tray is closed from open status, the recorder is
going to be in Resume Stop status at the memorized
position. Press the PLAY button. The Recorder will
resume playing from the memorized scene, and the
memorized position will be deleted. Each time LAST
MARK is pressed, the recorder erases the old Last
Mark information and records the new Last Mark
information to the disc.
Playback
Input
●●
When disc protect or cartridge protect is
on, this function cannot be used.
NOTE
56- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 57
Using Bookmarks
Playing Back a Bookmark
Press the MARKER button.
(V mode)
1
Press the MARKER button during
playback.
1
2
Press the œ √ buttons to select a
2
bookmarked scene.
Bookmark
1
2
Bookmark
MOVE
OK
RETURN
MOVE
PLAY
CANCEL
RETURN
Press the OK button when the desired
scene appears.
The number 1 is displayed and the scene is
memorized.
Press the OK or
button to start
3
playing from the selected scene.
Clearing a Bookmark
1
Bookmark
Press the MARKER button.
1
MOVE
PLAY
CANCEL
RETURN
Press the œ √ buttons to select a
2
bookmarked scene.
Press the œ √ button to move to the
1
2
3
4
next position.
Bookmark
Press the OK button when the desired
scene appears.
The number 2 is displayed and the scene is
memorized.
MOVE
PLAY
CANCEL
RETURN
1
2
Bookmark
Press the CANCEL button to delete the
selected bookmark.
3
1
Bookmark
MOVE
PLAY
CANCEL
RETURN
●
●
Repeat above to bookmark other positions.
You can bookmark up to 10 scenes.
MOVE
OK
RETURN
●●
When the disc tray is opened and then
closed, bookmarks will disappear.
NOTE
English -57
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 58
Using Markers
Playing Back a Marker
(VR mode)
Press the MARKER button.
1
Press the MARKER button.
1
Press the œ √ buttons to select a
2
bookmarked scene.
Marker
N:0
Marker
01 02
N:2
OK
RETURN
MOVE
PLAY
CANCEL
RETURN
Press the OK or
button to start
Press the OK button when the desired
scene appears.
3
playing from the selected scene.
2
The number 1 is displayed and the scene is
memorized.
●
If you press the NEXT SKIP ( )button or the
PREVIOUS SKIP( )button in marker mode, when
the next or current marked point plays for shorter
than three seconds, playback starts from the previous
Marker
01
N:1
marked point.
Clearing a Marker
MOVE
PLAY
CANCEL
RETURN
Press the MARKER button.
1
2
Press the œ √ button to move to the
3
4
next position.
Press the œ √ buttons to select a
bookmarked scene.
Press the CANCEL button to delete the
selected bookmark.
Press the OK button when the desired
scene appears.
The number 2 is displayed and the scene is
memorized.
Marker
01 02 03 04 05 06 07 08 09 10 N:10
Marker
01 02
N:2
Marker
01 02 03 04 05 06 07 08 09
N:9
MOVE
PLAY
CANCEL
RETURN
MOVE
PLAY
CANCEL
RETURN
●
DVD-RAM or DVD-RW (VR Mode) discs have the
Marker function instead of the Bookmark function.
The Marker function allows you to mark up to 99
scenes. Since the scenes may be displayed as many
different pages, numbering is necessary. If a disc in
use is encoded with Cartridge Protection or Disc
Protection, Markers cannot be set or deleted.
●●
When a marker is cleared while DVD-RAM/-RW (VR
mode) is playing, marker numbers will change.
For example, if the 7th marker is cleared after ten
markers are registered, the marker numbers after
the eighth will automatically move ahead by one.
Only playback is available.
58- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 59
The Buttons on the Remote Control
Playing an Audio CD/MP3
Playing an Audio CD (CD-DA)/MP3
Each disc has a variety of menu functions available.
Playing an Audio CD(CD-DA)
Insert an audio CD (CD-DA) into the disc
1
tray.
The audio CD menu appears and the tracks (songs)
are played automatically.
Music
CD
Repeat
01. TRACK
:
Off
Play Option
:
Normal
1
00 52
:
01. TRACK
02. TRACK
03. TRACK
04. TRACK
05. TRACK
06. TRACK
1
2
3
4
5
6
4:39
4:31
4:30
3:53
4:23
4:24
01/12
MOVE
OK
1. …†, 0~9: Selects a track (song).
2. √ : Plays the selected track (song).
3. OK button: Plays the selected track (song).
4. ( ) button: Plays the next track.
-1 Press the …† buttons to select the
2
track you want to hear, and then press
the OK button or √ button.
5. ( ) button: Returns to the beginning of the current
track when pressed during playback. If pressed
again, your DVD recorder moves to and plays the
previous track.
If you press this button within three seconds after
playback starts, the previous track will be played.
If you press this button after three seconds, the
current track will be replayed from the beginning.
-2 Press the number buttons to select the
2
track (song) and the track (song) is
played automatically.
Audio CD(CD-DA) Screen Elements
6. Press the (
/
) button: Fast Play (X2, X4, X8)
7.
8.
: Stops a track(song).
: Plays a track(song) or pauses playback.
Music
CD
Repeat
01. TRACK
:
Off
Play Option
:
Normal
1
2
7
4
1
00 52
:
01. TRACK
02. TRACK
03. TRACK
04. TRACK
05. TRACK
06. TRACK
1
2
3
4
5
6
4:39
4:31
4:30
3:53
4:23
4:24
5
6
01/12
3
MOVE
OK
1. Repeat mode: Repeat off/Repeat Track/Repeat Disc
2. Current track (song): Displays the number of the
track currently being played.
3. Displays the current play index and total track
number.
4. This shows the operating state of a disc and a
playback time corresponding to a portion that is
currently played.
5. Displays the track list (song list) and the playing time
of each track.
6. Button display.
7. Play Option: Normal, Random, Intro or Playlist
English -59
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 60
Playing a MP3 Disc
The Buttons on the Remote Control
Insert a MP3 Disc into the disc tray.
The MP3 menu appears and the tracks(songs) are
played automatically.
1
Music
MP3
Repeat
:
Off
Play Option
:
Normal
Straight from the heart
00 :22
ROOT
Bryan Adams
Bryan Adams_2
Straight from the heart
Run to you
ROOT
03/06
Heaven
MOVE
OK
RETURN
-1 Press the …† buttons to select the
2
track (song) you want to hear, and
then press the OK button or √ button.
-2 Press the number buttons to select the
2
track (song) and the track (song) is
played automatically.
1. …†,0~9: Selects a track (song).
2. √ : Plays the selected track (song).
3. OK button: Plays back the selected track (song) or
displays the files in the selected folder.
4. RETURN button: Moves to the folder to which the
current song belongs.
MP3 Screen Elements
5. ( ) button: Plays the next track.
6. ( ) button: Returns to the beginning of the current
track when pressed while playing. If pressed again,
your DVD recorder moves to and plays the previous
track.
If you press this button within three seconds, the pre-
vious track will be played.
Music
MP3
Repeat
:
Off
Play Option
:
Normal
7
4
1
2
Straight from the heart
00 :22
ROOT
Bryan Adams
Bryan Adams_2
Straight from the heart
Run to you
5
6
ROOT
03/06
If you press this button after three seconds, the cur-
rent track will be replayed from the beginning.
Heaven
3
MOVE
OK
RETURN
7.
8.
: Stops a track(song).
: Plays a track(song) or pauses playback.
1. Repeat mode: Repeat off, Repeat Track, Repeat
Folder or Repeat Disc
2. Current track (song): Displays the name of the
track being played.
3. Displays the current folder and play index.
4. This shows the operating state of a disc and a
playback time corresponding to a portion that is
currently played.
5. Displays the information for the folder and its tracks.
6. Button display.
7. Play Option : Normal, Random, Intro or Playlist
60- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 61
Play Option Mode
To Program Tracks
The Play Option can be used with an audio CD or MP3
in the Play or Stop mode.
You can register a maximum 30 tracks in the playlist.
Press the QUICK button.
1
Repeat Mode will be highlighted.
Press the QUICK button.
Music
CD
1
Repeat Mode will be highlighted.
Repeat
01. TRACK
:
Off
Play Option
:
Normal
Music
CD
1
00 : 52
Repeat
01. TRACK
:
Off
Play Option
:
Normal
01. TRACK
02. TRACK
03. TRACK
04. TRACK
05. TRACK
06. TRACK
1
2
3
4
5
6
4:39
4:31
4:30
3:53
4:23
4:24
1
00 : 52
01. TRACK
02. TRACK
03. TRACK
04. TRACK
05. TRACK
06. TRACK
1
2
3
4
5
6
4:39
4:31
4:30
3:53
4:23
4:24
01/12
01/12
MOVE
OK
RETURN
MOVE
OK
RETURN
Select “Play Option” using the œ √
●
●
During Playback, Repeat Mode will be highlighted.
During Stop, Play Option will be highlighted.
2
3
buttons.
Music
CD
Repeat
01. TRACK
:
Off
Play Option
:
Normal
1
00 52
:
Select “Play Option” Mode using the œ
2
3
√ buttons and press the OK button.
The play option screen will appear.
Press the OK button.
The play option screen will appear.
Select Playlist using the …† buttons.
Music
CD
Repeat
01. TRACK
:
Off
Play Option
:
Normal
1
00 52
:
01. TRACK
02. TRACK
03. TRACK
04. TRACK
05. TRACK
06. TRACK
1
2
3
4
5
6
4:39
4:31
4:30
3:53
4:23
4:24
Play Option Playlist
01/12
MOVE
OK
RETURN
Press the OK button.
The Playlist screen will appear.
Select “Tracks” in the order in which
you want them to play using the …†
buttons. Press the OK button.
4
Select a desired play option(Normal,
Random, Intro or Playlist) using the …†
buttons.
Music
CD
Play Option Normal
Repeat
:
Off
Play Option
:
Playlist
00 : 00
01. TRACK
1
2
3
4
5
6
1. P_TRACK
2. P_TRACK
3. P_TRACK
4. P_TRACK
1
2
3
4
02. TRACK
03. TRACK
04. TRACK
05. TRACK
06. TRACK
●
●
Normal: Tracks on a disc are played in the order in
which they were recorded on the disc.
Random: The Random option plays a disc’s tracks in
random order. After a random list is generated and
played completely, another random list is generated
and played.
MOVE
OK
MENU
Press the PLAY button to playback playlist.
Random Play is continued until the play option is
changed.
Intro: The first 10 seconds of each track will be
played.
If you playlisted a wrong track, select the
wrong track using the …† buttons and
press the CANCEL button.
5
●
If you want to listen to the music that you have
The wrong track will be removed.
selected, press the OK button or
The play option will be changed to Normal Play.
If you Press button, the recorder will skip to next
track with play option of Intro.
When Intro Play is completed, Normal Play is
performed.
button.
Music
Playlist
CD
Repeat
1
:
Off
Play Option
:
P_TRACK
01 : 36
01. TRACK
02. TRACK
03. TRACK
04. TRACK
05. TRACK
06. TRACK
1
2
3
4
5
6
1. P_TRACK
2. P_TRACK
3. P_TRACK
1
2
3
●
Playlist: The Playlist playback option allows you to
select the order in which you want tracks to play.
MOVE
OK
CANCEL
MENU
English -61
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 62
Press the …† œ √ buttons to select a
Playing a Picture CD
3
picture.
Photo
JPEG
Index
6
/
73
Slide Show
ROOT / DSC01189
Page
OK
2
/
13
MOVE
RETURN
There are two types of Picture CD. One is a CD with
only JPEG files. The other one is a CD with JPEG files
and MP3 files.(mixed CD)
●
●
To see the next 6 pictures, press the button.
To see the previous 6 pictures, press the button.
1. When mixed CD is played, a menu will be shown in
order to have you choose which contents, either
JPEG or MP3, you want to play.
-1 If your press the PLAY( ) button, the
1-1. If you want to play MP3 files on a mixed CD,
choose Music on the menu, then it will take you to
MP3 playing back screen. See page 60.
4
Slide show screen will appear.
The picture interval (Slide show speed) must be
set.
1-2. If you want to play JPEG files on a mixed CD,
choose Photo on the menu, then it will take you
to photo playing back screen. See number 3 on
this page.
Slide Show Speed
2. When a Picture CD(CD with only JPEG files) is
played, the recorder will show Album screen, show-
ing thumbnail images. See number 3 on this page.
DSC01189
MOVE
OK
RETURN
Insert a Picture CD(JPEG only) or Mixed
1
2
CD(JPEG + MP3)into the disc tray.
-2 Use the œ √ buttons to select a picture
4
file in Album screen and then press
the OK button.
In case of playing a Mixed CD, press the
…† buttons to select Photo and press
the OK or √ button.
(In case of playing a Picture CD, see number 3 on
this page.)
Photo
JPEG+MP3
DSC01189
Press OK or Right button:
Photo
MOVE
PHOTO
OK
RETURN
: Returns to the Album screen.
MOVE
OK
RETURN
EXIT
: The unit enters slide show mode.
Before the slide show can begin, the picture
interval (Slide show speed) must be set.
: Each time the OK button is pressed, the
picture rotates 90 degrees clockwise.
: Each time the OK button is pressed, the
picture is enlarged up to 4X.
(Normal ● 2X ● 4X ● 2X ● Normal)
●
Press the QUICK button to clear or display menus.
62- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 63
Press the …† buttons to select Title List,
and then press the OK or √ button
twice.
Playing the Title List
2
3
The Title List screen is displayed.
Title List
Length Edit
DVD-RAM(VR)
No. Title
01 19/APR/2004
02 19/APR/2004
03 20/APR/2004
04 20/APR/2004
05 21/APR/2004
06 21/APR/2004
07 22/APR/2004
1
1
2
2
1
1
1
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
00:09:36
√
√
√
√
√
√
√
19/APR/2004 12:00 PR12
19/APR/2004
12:00
SP
Follow these instructions to play back a scene from the
Title List.
MOVE
OK
RETURN
EXIT
Using the TITLE LIST button
Press the …† buttons to select Title,
and then press the OK or √ button.
The Edit menu is displayed on the right.
Press the TITLE LIST button.
The Title List screen is displayed.
Title List
Length Edit
DVD-RAM(VR)
1
No. Title
01 19/APR/2004
02 19/APR/2004
03 20/APR/2004
04 20/APR/2004
05 21/APR/2004
06 21/APR/2004
07 22/APR/2004
1
1
2
2
1
1
1
00:00:21
00:00:03
√
√
Title List
DVD-RAM(VR)
Play
R
e
n
a
m
e
No. Title
Length Edit
21/APR/2004 11:50 PR11
Delete
01 19/APR/2004
02 19/APR/2004
03 20/APR/2004
04 20/APR/2004
05 21/APR/2004
06 21/APR/2004
07 22/APR/2004
1
1
2
2
1
1
1
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
00:09:36
√
√
√
√
√
√
√
21/APR/2004
11:50
Edit
SP
Protection
MOVE
OK
RETURN
EXIT
19/APR/2004 12:00 PR12
19/APR/2004
12:00
SP
MOVE
OK
RETURN
EXIT
(Play, Rename, Delete, Edit, Protection : See
pages 66~69)
Press the …† buttons to select an entry
Press the …† buttons to select “Play” to
2
3
you want to play from Title List, and then
4
play the title list and then press the OK
button.
press the PLAY
button.
The selected entry (title) will be played back.
The selected entry (title) will be played back.
√ Play
To stop title play, press the STOP button.
To return the title list screen, press the
TITLE LIST button.
Using the MENU button
To view the current status of the disc and progress of
playback : Press the DISPLAY button, and the infor-
mation about the disc will appear.
Press the MENU button.
1
DVD-RAM(VR)
Disc Name
Disc Info
Title List
DVD-RAM(VR)
Title List
√
Total Title
16
2
Total Playlist
Recordable Time
Protection
Main Screen
PIP Screen
03:00 SP
Not Protected
Playback
- -
21 APR 2004 WED
12:00
MOVE
OK
RETURN
EXIT
English -63
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 64
Press the DISPLAY button once again. Then you can
check the information about the title under playback.
Title List Screen Elements
DVD-RAM(VR)
Name
Playing Info
21/APR/2004 11:50
PR11
3
4
5
Title
Created Time
Length
1/16
21/APR/2004 12:00
00:07:43 LP
00:13:27
Title List
Title List
Length Edit
DVD-RAM(VR)
No. Title
6
Length Edit
Playing Time
01 19/APR/2004
1
1
2
2
1
1
1
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
√
00:00:21
00:00:03
√
√
Title Protection
21 APR 2004 WED
Not Protected
02 19/APR/2004
03 20/APR/2004
04 20/APR/2004
05 21/APR/2004
√
12:00
1
2
√
Play
√
Rename
19/APR/2004 12:00 PR12
Delete
Edit
√
19/APR/2004
12:00
06 21/APR/2004
√
SP
Protection
07 22/APR/2004
00:09:36
√
MOVE
OK
RETURN
EXIT
EXIT
To stop title play, press the STOP button.
To return the title list screen, press the TITLE LIST
button.
5
3
1. Playback screen for recorded entries.
2. Information window for the selected entry:
Title name, recording date, recording time, lock
status, recording mode
●●
You can also play a recorded program by
3. Recorded entry No.
pressing the QUICK button.
NOTE
4. Recorded entry title
5. Recording duration (i.e., the playing time)
6. Title list edit items
Play: Plays the selected entry.
Rename: Renames the title of a selected entry.
Delete: Deletes the selected entry from the list.
Edit: Deletes a section.
DVD-RAM(VR)
1/14
00:01:45
Off
ENG
Off
D
5.1CH
Off
MOVE
CHANGE
Protection: Locks or unlocks the selected entry.
7. Button display.
●●
●●
Press the …† buttons to select Title.
Press the œ √ buttons to select to play
●●
the title list and then press the OK button.
This may depend on the type of disc.
NOTE
●●
DVD-R/DVD-RW(Video) has limited
editing function.
64- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_47~65 8/31/04 10:30 AM Page 65
Editing
This section introduces basic functions of DVD
editing and explains both edit functions for the
recording on a disc and edit functions for the entire
disc.
●
Title List
Title refers to a recorded video and audio stream.
Title List shows a list to help you select a title.
Since the title list consists of the information on
stream that is actually recorded, if one title is deleted,
that title cannot be played again.
●
Play List
This refers to a unit of playback, which is made by
selecting a desired scene in the entire Title List.
When one playlist is played, only the scene selected
by the user will play and then stop. Since only the
information necessary for playing a desired scene is
included in a playlist, even if that playlist is deleted,
the original stream will not be deleted.
If recording or editing could have not been
finished properly because of any kinds of
error, such as sudden power failure, the
recording or editing might have not been
done.
Basic Editing (Title List) .....................................66
Advance Editing (Play List)................................70
Disc Manager.....................................................78
Please be aware that a material that has been
damaged is unable to be retrieved to its
original content.
English -65
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:31 AM Page 66
Rename
DVD-RAM(VR)
Basic Editing (Title List)
A
F
K
P
U
Z
B
G
L
C
H
D
I
E
J
a
f
k
p
b
g
c
h
m
r
d
i
n
s
x
e
j
o
t
M
R
N
S
X
O
T
Y
l
q
Q
V
u
z
n
w
y
W
Back Space
Space
Delete
Clear
Save
MOVE
OK
RETURN
EXIT
Renaming(Labeling) a Title
Follow these instructions to rename a title list entry, i.e.,
to edit the title of a recorded program.
Select the desired characters using the
arrow (…† œ √) buttons, press the OK
button.
4
Rename
DVD-RAM(VR)
Sports(A1)
Using the TITLE LIST button
Insert the recorded disc,
A
F
K
P
U
Z
B
G
L
C
H
D
I
E
J
a
f
k
p
b
g
c
h
m
r
d
i
n
s
x
e
j
o
t
M
R
N
S
X
O
T
Y
l
q
Q
V
u
z
n
w
y
W
1
2
Press the TITLE LIST button.
Back Space
Space
Delete
Clear
Save
The Title List screen is displayed
MOVE
OK
RETURN
EXIT
Using the MENU button
●
Press the MENU button.
●
●
●
Back Space: Moves the cursor one position
backwards.( Equivalent to the CANCEL button)
Space: Enters a blank and moves the cursor one
forward (to the right).
●
Press the …† buttons to select Title List, and then
press the OK or √ button twice.
Title List
DVD-RAM(VR)
Delete: Deletes the character at the cursor posi-
No. Title
Length Edit
01 19/APR/2004
02 19/APR/2004
03 20/APR/2004
04 20/APR/2004
05 21/APR/2004
06 21/APR/2004
1
1
2
2
1
1
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
√
√
√
√
√
√
tion.
●
Clear: Deletes all the character inputs.
Save: Registers the character inputs.
●
19/APR/2004 12:00 PR12
19/APR/2004
12:00
SP
MOVE
OK
RETURN
EXIT
Press the arrow buttons to select
“Save”, and then press the OK button.
The changed title name is displayed on the title item
of the selected entry.
5
Press the …† buttons to select an entry
you want to rename from the Title List,
and then press the OK or √ button.
Title List
Length Edit
DVD-RAM(VR)
No. Title
01 19/APR/2004
02 19/APR/2004
03 20/APR/2004
04 20/APR/2004
05 Sports(A1)
06 21/APR/2004
1
1
2
2
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
√
√
√
√
√
√
Title List
DVD-RAM(VR)
No. Title
Length Edit
01 19/APR/2004
02 19/APR/2004
03 20/APR/2004
04 20/APR/2004
05 21/APR/2004
06 21/APR/2004
1
1
2
2
1
1
00:00:21
00:00:03
√
√
Sports (A1)
19/APR/2004
12:00
1
Play
SP
R
e
n
a
m
e
21/APR/2004 12:00 PR12
Delete
MOVE
OK
RETURN
EXIT
21/APR/2004
12:00
Edit
SP
Protection
MOVE
OK
RETURN
EXIT
Press the …† buttons to select “Rename”,
and then press the OK button.
The Rename screen is displayed.
3
Title List
Length Edit
DVD-RAM(VR)
No. Title
01 19/APR/2004
02 19/APR/2004
03 20/APR/2004
04 20/APR/2004
05 21/APR/2004
06 21/APR/2004
1
1
2
2
1
1
00:00:21
00:00:03
√
√
Play
R
e
n
a
m
e
21/APR/2004 12:00 PR12
Delete
21/APR/2004
12:00
Edit
SP
Protection
MOVE
OK
RETURN
EXIT
66- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:31 AM Page 67
Press the œ √ buttons to select “On”,
and then press the OK button. The key
icon on the information window for the
selected entry changes to the locked
Locking(Protecting) a Title
Follow these instructions to lock an entry to protect it
4
from accidental deletion.
status.
(
●
)
Title List
Length Edit
DVD-RAM(VR)
Using the TITLE LIST button
Insert the recorded disc,
No. Title
01 Drama
02 Music
03 Sports
04 Movie
05 Sports(A1)
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
√
√
√
√
√
√
Sports(A1)
19/APR/2004
12:00
1
Press the TITLE LIST button.
06 Edu
1
SP
The Title List screen is displayed
MOVE
OK
RETURN
EXIT
Using the MENU button
●
Press the MENU button.
●
Press the …† buttons to select Title List, and then
press the OK or √ button twice.
Title List
Length Edit
DVD-RAM(VR)
Deleting a Title
Follow these instructions to delete an entry from the
No. Title
01 Drama
02 Music
03 Sports
04 Movie
05 Sports(A1)
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
√
√
√
√
√
√
Title List.
Drama
19/APR/2004
12:00
06 Edu
1
SP
MOVE
OK
RETURN
EXIT
Using the TITLE LIST button
Insert the recorded disc,
Press the …† buttons to select an entry
you want to protect in the Title List, and
then press the OK or √ button.
1
2
Press the TITLE LIST button.
2
3
The Title List screen is displayed
Using the MENU button
Title List
DVD-RAM(VR)
●
Press the MENU button.
No. Title
Length Edit
01 Drama
02 Music
03 Sports
04 Movie
05 Sports(A1)
00:00:21
00:00:03
√
√
●
Press the …† buttons to select Title List, and then
press the OK or √ button twice.
Play
R
e
n
a
m
e
19/APR/2004 12:00 PR12
Delete
Title List
DVD-RAM(VR)
19/APR/2004
12:00
Edit
06 Edu
1
SP
Protection
No. Title
Length Edit
01 Drama
02 Music
03 Sports
04 Movie
05 Sports(A1)
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
√
√
√
√
√
√
MOVE
OK
RETURN
EXIT
Drama
19/APR//2004
12:00
06 Edu
1
SP
Press the …† buttons to select
“Protection”, and then press the OK
button.
MOVE
OK
RETURN
EXIT
Title List
Length Edit
DVD-RAM(VR)
Press the …† buttons to select an entry
you want to delete in the Title List, and
then press the OK or √ button.
No. Title
01 Drama
02 Music
03 Sports
04 Movie
05 Sports(A1)
00:00:21
00:00:03
√
√
Play
R
e
n
a
m
e
Sports(A1)
19/APR/2004
12:00
Delete
Title List
Length Edit
DVD-RAM(VR)
Edit
06 Edu
1
SP
No. Title
Protection
01 Drama
02 Music
03 Sports
04 Movie
05 Sports(A1)
00:00:21
00:00:03
√
√
MOVE
OK
RETURN
EXIT
Play
R
e
n
a
m
e
Sports(A1)
19/APR/2004
12:00
Delete
Edit
06 Edu
1
Title List
DVD-RAM(VR)
SP
Protection
MOVE
OK
RETURN
EXIT
Title Protection:
On
Off
Sports(A1)
19/APR/2004
12:00
SP
MOVE
OK
RETURN
EXIT
English -67
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:31 AM Page 68
Press the …† buttons to select “Delete”,
and then press the OK button.
Deleting a Section of a Title
Follow these instructions to delete a section of a Title
3
List entry.
Title List
Length Edit
DVD-RAM(VR)
(VR mode)
No. Title
01 Drama
02 Music
03 Sports
04 Movie
05 Sports(A1)
00:00:21
00:00:03
√
√
Play
Using the TITLE LIST button
R
e
n
a
m
e
Sports(A1)
19/APR/2004
12:00
Delete
Edit
06 Edu
1
SP
Protection
Insert the recorded disc,
Press the TITLE LIST button.
The Title List screen is displayed
MOVE
OK
RETURN
EXIT
1
You will be prompted with the confirmation
message.
Using the MENU button
●
Press the MENU button.
Press the …† buttons to select Title List, and then
press the OK or √ button twice.
DVD-RAM(VR), DVD-RW(VR mode): Since
Playlist is present, the message ‘Do you want to
delete?( Related playlist may be deleted.)’ is
displayed.
●
DVD-RW(Video mode), DVD-R: Since Playlist is
not present, the message ‘Do you want to delete?’
is displayed.
Title List
Length Edit
DVD-RAM(VR)
No. Title
01 Drama
02 Music
03 Sports
04 Movie
05 Sports(A1)
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
√
√
√
√
√
√
Drama
Title List
DVD-RAM(VR)
19/APR/2004
12:00
06 Edu
1
SP
Do you want to delete?
MOVE
OK
RETURN
EXIT
(Related playlists
may be deleted.)
Sports(A1)
19/APR/2004
12:00
Yes
No
Press the …† buttons to select an entry
you want to edit from the Title List, and
then press the OK or √ button.
SP
2
3
MOVE
OK
RETURN
EXIT
●
This may depend on the type of disc.
Title List
Length Edit
DVD-RAM(VR)
No. Title
01 Drama
02 Music
03 Sports
04 Movie
05 Sports(A1)
00:00:21
00:00:03
√
√
Play
Press the œ √ buttons to select “Yes”,
and then press the OK button.
R
e
n
a
m
e
4
Sports(A1)
19/APR/2004
12:00
Delete
Edit
06 Edu
1
SP
Protection
MOVE
OK
RETURN
EXIT
●●
You cannot delete a protected entry.
If you want to delete a protected entry,
select “OFF” in the Title Protection menu.
NOTE
Press the …† buttons to select “Edit”,
and then press the OK button.
The Edit Title List screen is display
●●
Disc Protection: When Protected or
Cartridge Protection has been set when a
DVD-RAM is used, data cannot be delet-
ed from a disc.
Title List
DVD-RAM(VR)
No. Title
Length Edit
●●
Once an entry is deleted from the Title
List it cannot be recovered.
01 Drama
02 Music
03 Sports
04 Movie
05 Sports(A1)
00:00:21
00:00:03
√
√
Play
●●
R
e
n
a
m
e
Once DVD-R, DVD-RW is finalised, it
cannot be deleted.
Sports(A1)
19/APR/2004
12:00
Delete
Edit
06 Edu
1
SP
Protection
●●
With DVD-R, titles are only deleted from
MOVE
OK
RETURN
EXIT
the menu, however, the Title remains
physically on the disc.
68- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:31 AM Page 69
Press the OK button at the starting
Press the …† buttons to select “Delete”,
and then press the OK button.
The selected section has been deleted.
4
point.
6
The image and starting point time are displayed in the
section deletion starting point window.
Edit Title List
Title List No. 05
DVD-RAM(VR)
Edit Title List
Title List No. 05
DVD-RAM(VR)
Start
End
Start
End
Start
End
00:00:06
Start
End
00:00:06
00:10:15
Delete
Return
00:00:10
Delete
Finish
Sports(A1)
21/APR/2004 11:50
Sports(A1)
21/APR/2004 11:50
00:10:10
00:00:00
MOVE
OK
RETURN
EXIT
MOVE
OK
RETURN
EXIT
Edit Title List
Title List No. 05
DVD-RAM(VR)
tart
nd
Do you want to delete?
Edit Title List Screen Elements
(Deleted part will not be restored.)
elete
Return
Yes
No
S
21/APR/2004 11:50
Edit Title List
DVD-RAM(VR)
End
00:10:10
Title List No. 05
00:00:06
MOVE
OK
RETURN
EXIT
Start
End
Start
End
3
4
00:00:10
Delete
Return
1
2
To return to the Title List screen, press the …†
buttons to select Return.
Sports(A1)
21/APR/2004 11:50
00:00:00
MOVE
OK
RETURN
EXIT
Press the MENU button after the
operation has finished.
The Title List screen will disappear.
7
1. Playback bar
2. Playtime
3. Section deletion starting point window and time
4. Section deletion end point window and time
●●
The length of the section to be deleted
must be at least 5 seconds long.
NOTE
●●
If the length of the section to be deleted is
●
Select the start and end points of the section you
want to delete using the playback related but-
less than 5 seconds, you will be prompted
with the message 'The range is too
short.'.
tons.
Playback related buttons:
●
(
,
,
,
,
,
).
,
●●
If the end time precedes the starting time,
you will be prompted with the message
‘End point cannot be marked earlier than
start point’.
Press the OK button at the end point.
The image and end point time are displayed in the
Section deletion ending point window.
5
●●
The section cannot be deleted when it
includes a still picture.
Edit Title List
Title List No. 05
DVD-RAM(VR)
Start
End
Start
End
00:00:06
00:10:15
Delete
Return
Sports(A1)
21/APR/2004 11:50
00:10:10
MOVE
OK
RETURN
EXIT
English -69
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:31 AM Page 70
Press the OK button at the end point.
5
Advanced Editing
(Play List)
Make Scene
Scene No. 001
DVD-RAM(VR)
Start
End
Start
End
00:00:10
00:10:00
Make
Return
Creating a Playlist
Follow these instructions to create a new playlist entry
New Playlist
19/APR/04 12:00
00:10:00
MOVE
OK
RETURN
EXIT
from a recorded title.
●
●
The image and end point time are displayed in the
End window.
The yellow-colored selection bar moves to the
Make item.
(VR mode)
Press the MENU button with the disc
stopped.
1
2
- To make a new playlist -
Press the …† buttons to select “Playlist”,
and then press the OK or √ button.
Press the …† buttons to select “Make”,
6
and then press the OK button.
Playlist
DVD-RAM(VR)
A new Scene will be added to the current Playlist.
A new Make Scene screen is displayed.
New Playlist
Edit Playlist
√
√
Repeat the above steps to create further scenes.
●●
If you want to make a new playlist, go to
MENU ● new playlist.
MOVE
OK
RETURN
EXIT
NOTE
●●
You can check and see all the scenes on
Edit Playlist screen.
Press the …† buttons to select “New
Playlist”, and then press the OK or √
button.
3
4
The Make Scene screen is displayed.
- To return to Edit Playlist menu -
Make Scene
Scene No. 001
DVD-RAM(VR)
Press the …† buttons to select
7
“Return”, and then press the OK button.
Start
End
The Edit Playlist screen is displayed.
Start
End
00:00:00
00:00:10
Make
Return
Edit Playlist
DVD-RAM(VR)
New Playlist
No. Title
Length Edit
19/APR/04 12:00
00:00:00
01 23/APR/2004/0 00:00:21
02 23/APR/2004/0 00:00:03
03 24/APR/2004/1 00:00:15
04 24/APR/2004/1 00:00:16
05 25/APR/2004/2 00:06:32
√
√
√
√
√
MOVE
OK
RETURN
EXIT
25/APR/2004 06:03
7 Scenes
23/APR/2004 06:43
Press the OK button at the start point.
MOVE
OK
RETURN
EXIT
Make Scene
Scene No. 001
DVD-RAM(VR)
Start
End
Press the MENU or PLAY LIST button
after the operation has finished.
The Edit Playlist screen will disappear.
Start
End
00:00:10
00:00:00
8
00:00:10
Make
Return
New Playlist
19/APR/04 12:00
MOVE
OK
RETURN
EXIT
●
●
●
The image and time at the start point are
displayed on the Start window.
The yellow-colored selection bar moves to the
End item.
Select the starting point of the section from
which you want to create a new scene using the
●●
You can create up to 99 playlist entries.
●●
NOTE
Depending on the kind of disc, the
displayed screen may have a slight
difference.
playback related buttons (
).
,
,
,
,
,
,
70- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:31 AM Page 71
Press the …† buttons to select “Play”,
and then select the OK button.
The playlist entries will be played.
Playing Entries in the Playlist
Follow these instructions to play the playlist entries.
3
Edit Playlist
Length Edit
DVD-RAM(VR)
No. Title
(VR mode)
01 23/APR/2004/0 00:00:21
02 23/APR/2004/0 00:00:03
√
√
03 24/APR/2004/1
Play
Insert the recorded disc,
Press the PLAY LIST button.
The Edit Playlist screen is displayed.
04 24/APR/2004/1
Rename
23/APR/2004 06:43
Edit Scene
05 25/APR/2004/2
1
7 Scenes
Copy
23/APR/2004 06:43
Delete
MOVE
OK
RETURN
EXIT
Edit Playlist
DVD-RAM(VR)
No. Title
Length Edit
01 23/APR/2004/0 00:00:21
02 23/APR/2004/0 00:00:03
03 24/APR/2004/1 00:00:15
04 24/APR/2004/1 00:00:16
05 25/APR/2004/2 00:06:32
√
√
√
√
√
√ Play
23/APR/2004 06:43
7 Scenes
23/APR/2004 06:43
MOVE
OK
RETURN
EXIT
Using the MENU button
●
To view the current status of the disc and progress
of playback : Press the DISPLAY button, and the
information about the disc will appear.
●
●
●
Press the MENU button when the disc has
stopped.
Press the …† buttons to select Playlist, and
then press the OK or √ button.
Press the …† buttons to select Edit Playlist,
and then press the OK or √ button.
DVD-RAM(VR)
Disc Name
Disc Info
Total Title
14
5
Total Playlist
Recordable Time
Protection
Main Screen
PIP Screen
00:00:15 SP
Not Protected
Playback [Playlist]
- -
Playlist
DVD-RAM(VR)
New Playlist
Edit Playlist
√
√
24 APR 2004 SAT
06:43
●
Press the DISPLAY button once again. Then you
can
under play
check the information about the playlist
back.
MOVE
OK
RETURN
EXIT
DVD-RAM(VR)
Name
Playing Info
04/APR/2004 06:43
Playlist
Created Time
Length
Playing Time
Total Scene
24 APR 2004 SAT
3/5
Press the …† buttons to select the title
you want to edit from the Playlist, and
then press the OK or √ button.
The Edit Playlist menu is displayed : Play, Rename,
Edit Screen, Copy, Delete.
04/APR/2004 06:43
00:07:43 LP
00:00:05
2
1
12:00
●
The screen returns to the Edit Playlist screen when
the playback has finished.
Press the STOP button to stop playing.
The screen returns to the Edit Playlist screen.
4
English -71
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:31 AM Page 72
Enter the desired characters using the
Renaming a Playlist Entry
Follow these instructions to rename a playlist entry, i.e.
4
5
…† œ √ buttons.
to edit the title of a playlist entry.
Rename
DVD-RAM(VR)
Dolphin
A
F
K
P
U
Z
B
G
L
C
H
D
I
E
J
a
f
k
p
b
g
c
h
m
r
d
i
n
s
x
e
j
o
t
(VR mode)
M
R
N
S
X
O
T
Y
l
q
Q
V
u
z
n
w
y
W
Insert the recorded disc,
1
Press the PLAY LIST button.
Back Space
Space
Delete
Clear
Save
The Edit Playlist screen is displayed.
MOVE
OK
RETURN
EXIT
●
●
This function is the same as the Rename function
in the renaming the title list. (See page 66.)
The maximum number of characters that can be
entered is 31. All 31 characters can then be
displayed by pressing the DISPLAY button.
Edit Playlist
Length Edit
DVD-RAM(VR)
No. Title
01 23/APR/2004/0 00:00:21
02 23/APR/2004/0 00:00:03
03 24/APR/2004/1 00:00:15
04 24/APR/2004/1 00:00:16
05 25/APR/2004/2 00:06:32
√
√
√
√
√
23/APR/2004 06:43
7 Scenes
23/APR/2004 06:43
MOVE
OK
RETURN
EXIT
Press the arrow buttons to select
“Save”, and then press the OK button.
The changed title is displayed in the title field of the
selected playlist entry.
Using the MENU button
●
●
●
Press the MENU button when the disc has
stopped.
Press the …† buttons to select Playlist, and
then press the OK or √ button.
Press the …† buttons to select Edit Playlist,
and then press the OK or √ button.
Edit Playlist
Length Edit
DVD-RAM(VR)
No. Title
01 23/APR/2004/0 00:00:21
02 23/APR/2004/0 00:00:03
√
√
√
√
√
03 Dolphin
00:00:15
04 24/APR/2004/1 00:00:16
05 25/APR/2004/2 00:06:32
Dolphin
7 Scenes
23/APR/2004 06:43
Press the …† buttons to select the title
you want to edit from the Playlist, and
then press the OK or √ button.
The Edit Playlist menu is displayed :Play, Rename,
Edit Scene, Copy, Delete
MOVE OK
RETURN
EXIT
2
3
Edit Playlist
Length Edit
DVD-RAM(VR)
No. Title
01 23/APR/2004/0 00:00:21
02 23/APR/2004/0 00:00:03
√
√
03 24/APR/2004/1
Play
04 24/APR/2004/1
Rename
23/APR/2004 06:43
Edit Scene
05 25/APR/2004/2
7 Scenes
Copy
23/APR/2004 06:43
Delete
MOVE
OK
RETURN
EXIT
Press the …† buttons to select “Rename”,
and then press the OK button.
The Rename screen is displayed.
Edit Playlist
Length Edit
DVD-RAM(VR)
No. Title
01 23/APR/2004/0 00:00:21
02 23/APR/2004/0 00:00:03
√
√
03 24/APR/2004/1
Play
04 24/APR/2004/1
Rename
23/APR/2004 06:43
Edit Scene
05 25/APR/2004/2
7 Scenes
Copy
23/APR/2004 06:43
Delete
MOVE
OK
RETURN
EXIT
72- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:31 AM Page 73
Editing a Scene for the Playlist
Follow these instructions to edit scenes for a playlist.
Playing a Selected Scene
Press the arrow buttons to select the
4
scene you want to play, and then press
the OK button.
(VR mode)
The playlist entry to be played is selected.
Insert the recorded disc,
Press the PLAY LIST button.
The Edit Playlist screen is displayed.
1
Edit Scene
DVD-RAM(VR)
Scene No.
2/7
02
Playlist No.
2
Play
Modify
Move
Edit Playlist
Length Edit
DVD-RAM(VR)
01
00:00:26
00:00:07
00:00:11
03
06
00:00:04
No. Title
01 Science
02 Sky
00:00:17
00:00:06
00:00:06
00:00:37
√
√
√
√
Add
03 Dolphin
04 Natural
04
00:00:03
MOVE
05
00:00:04
Delete
OK
RETURN
EXIT
Science
7 Scenes
23/APR/2004 06:43
MOVE OK
RETURN
EXIT
Press the OK button.
5
The selected scene is played.
Using the MENU button
●
●
●
Press the MENU button when the disc has
stopped.
Press the …† buttons to select Playlist, and
then press the OK or √ button.
Press the …† buttons to select Edit Playlist,
and then press the OK or √ button.
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
2/7
02
2
Play
Modify
Move
01
00:00:26
00:00:07
00:00:11
03
06
00:00:04
Add
04
00:00:03
MOVE
05
00:00:04
Delete
OK
RETURN
EXIT
Press the …† buttons to select the title
you want to edit from the Playlist, and
then press the OK or √ button.
The Edit Playlist menu is displayed.:Play, Rename,
Edit Scene, Copy, Delete
2
3
√ Play
Edit Playlist
Length Edit
DVD-RAM(VR)
No. Title
01 Science
02 Sky
00:00:17
00:00:06
√
√
03 Dolphin
04 Natural
Play
R
e
n
a
m
e
Dolphin
Edit Scene
Copy
7 Scenes
23/APR/2004 06:43
Delete
●
●
To stop scene play, press the STOP button.
Select a desired scene by using the …† œ √
buttons and press the PLAY button.
Then playback will operate.
MOVE OK
RETURN
EXIT
Press the …† buttons to select “Edit
Scene”, and then press the OK button.
The Edit Scene screen is displayed.
Edit Playlist
Length Edit
DVD-RAM(VR)
No. Title
01 Science
02 Sky
00:00:17
00:00:06
√
√
03 Dolphin
04 Natural
Play
R
e
n
a
m
e
Dolphin
Edit Scene
Copy
7 Scenes
23/APR/2004 06:43
Delete
MOVE
OK
RETURN
EXIT
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
1/7
02
3
Play
Modify
Move
01
00:00:26
00:00:07
03
06
00:00:04
Add
04
00:00:03
05
00:00:11
00:00:04
Delete
MOVE
OK
RETURN
EXIT
English -73
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:31 AM Page 74
Press the OK button at the end point of
the scene.
Modifying a Scene (Replacing a Scene)
Press the arrow buttons to select the
7
8
Modify Scene
Scene No. 001
DVD-RAM(VR)
Start
End
4
5
6
scene you want to modify, and then
press the OK button.
Start
End
00:00:00
00:00:25
Change
Return
Natural
23/APR/2004 03:34:00
00:00:00
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
MOVE
OK
RETURN
EXIT
2/7
02
2
Play
Modify
Move
●
The image and ending point time are displayed in
the End window.
01
00:00:26
00:00:07
00:00:11
03
06
00:00:04
Add
04
00:00:03
05
00:00:04
Delete
Press the …† buttons to select “Change”,
and then press the OK button.
MOVE
OK
RETURN
EXIT
Modify Scene
Scene No. 001
DVD-RAM(VR)
Press the …† buttons to select ‘Modify”,
and then press the OK button.
The Modify Scene screen is displayed.
Start
End
Start
End
00:00:00
00:00:30
Change
Return
Natural
23/APR/2004 03:34:00
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
00:00:30
2/7
02
2
MOVE
OK
RETURN
EXIT
Play
Modify
Move
01
00:00:26
00:00:07
00:00:11
03
06
00:00:04
●
The scene you want to modify is changed with the
selected section.
Add
04
00:00:03
05
00:00:04
Delete
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
MOVE
OK
RETURN
EXIT
2/9
02
2
Play
Modify
Move
01
00:00:26
00:00:07
00:00:11
03
06
00:00:04
Press the OK button at the start point of
the scene.
Add
04
00:00:03
05
00:00:04
Delete
MOVE
OK
RETURN
EXIT
Modify Scene
Scene No. 001
DVD-RAM(VR)
Start
End
Start
End
00:00:00
00:00:20
Change
Return
Natural
23/APR/2004 03:34:00
00:00:00
MOVE
OK
RETURN
EXIT
●
●
The image and starting point time are displayed
on the Start window.
Select the starting or ending point of the section
you want to modify using the playback related
buttons (
,
,
,
,
,
).
,
74- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:32 AM Page 75
●●
●●
You cannot move the selected scene to the
position of the next scene, because the
selected scene should be inserted before
that position, which requires no action.
Moving a Scene (Changing the Position of a Scene)
NOTE
Press the …† œ √ buttons to select the
Depending on the kind of disc, the displayed
screen may have a slight difference.
4
scene you want to move (change the
position), and then press the OK button.
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
Adding a Scene
3/7
02
3
Play
Modify
Move
01
04
00:00:26
00:00:03
00:00:07
00:00:11
03
06
00:00:04
00:00:04
Press the …† œ √ buttons to select the
Add
4
scene that will have a new scene
inserted before it, and then press the OK
button.
05
Delete
MOVE
OK
RETURN
EXIT
A yellow selection window is displayed on the scene
to be added as the new scene.
Press the …† buttons to select “Move”,
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
5
and then press the OK button.
4/3
02
4
Play
Modify
Move
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
01
00:00:26
00:00:07
03
00:00:04
3/7
02
3
Play
Modify
Move
Add
Delete
01
04
00:00:26
00:00:03
00:00:07
00:00:11
03
06
00:00:04
00:00:04
MOVE
OK
RETURN
EXIT
Add
05
Delete
MOVE
OK
RETURN
EXIT
Press the OK button.
5
6
The Add Scene screen is displayed.
●
A yellow selection window is displayed on the
scene to be moved.
Add Scene
DVD-RAM(VR)
Scene No. 004
Start
End
Press the …† œ √ buttons to select the
position to which you want to move the
selected scene, and then select the OK
button.
6
Start
End
00:00:00
00:00:00
00:00:10
Add
Sclence
23/APR/2004 06:43
Cancel
MOVE
OK
RETURN
EXIT
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
6/7
6
Play
Modify
Move
01
00:00:26
02
00:00:07
00:00:11
03
00:00:04
Press the OK button at the starting point
of the scene.
Add
04
00:00:03
05
06
00:00:04
Delete
MOVE
OK
RETURN
EXIT
Add Scene
Scene No. 004
DVD-RAM(VR)
Start
End
●
The selected scene is moved to the selected
position.
Start
End
00:00:15
00:00:15
Add
Sclence
23/APR/2004 06:43
Cancel
00:00:00
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
MOVE
OK
RETURN
EXIT
5/7
02
5
Play
Modify
Move
01
00:00:26
00:00:07
00:00:11
03
06
00:00:04
●
●
The image and starting point time are displayed in
the Start window.
Select the end point of the section where you want
to add the new scene using the playback related
Add
04
00:00:03
05
00:00:04
Delete
MOVE
OK
RETURN
EXIT
buttons (
,
,
,
,
,
).
,
English -75
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:32 AM Page 76
Press the OK button at the end point of
the scene.
Copying a Playlist Entry to the
Playlist
7
8
Add Scene
Scene No. 004
DVD-RAM(VR)
Start
End
Using the PLAY LIST button
Insert the recorded disc,
Start
End
00:00:15
00:00:15
Add
Sclence
23/APR/2004 06:43
Cancel
00:00:35
1
Press the PLAY LIST button.
MOVE
OK
RETURN
EXIT
The Edit Playlist screen is displayed.
●
The image and time of the end point are displayed
in the End window.
Edit Playlist
Length Edit
DVD-RAM(VR)
No. Title
01 Science
02 Sky
00:00:17
00:00:06
00:00:06
00:00:37
√
√
√
√
03 Dolphin
04 Natural
Press the …† buttons to select “Add”,
and then press the OK button.
Science
7 Scenes
23/APR/2004 06:43
MOVE OK
RETURN
EXIT
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
4/4
02
4
Play
Modify
Move
Using the MENU button
01
00:00:26
00:00:07
03
00:00:04
●
●
●
Press the MENU button. When the disc has
stopped.
Press the …† buttons to select Playlist, and then
press the OK or √ button.
Press the …† buttons to select Edit Playlist, and
then press the OK or √ button.
Add
04
00:00:15
Delete
MOVE
OK
RETURN
EXIT
●
●
The section you want to add is inserted prior to the
scene selected in step 4 of Adding a Scene on the
previous page.
To cancel, press the …† buttons to select cancel
and then press the OK button.
Press the …† buttons to select the title
you want to edit from the Playlist, and
then press the OK or √ button.
The Edit Playlist menu is displayed.:Play, Rename,
Edit Scene, Copy, Delete
2
3
Edit Playlist
DVD-RAM(VR)
No. Title
Length Edit
Deleting a Scene
01 Science
02 Sky
00:00:17
00:00:06
√
√
03 Dolphin
04 Natural
Play
R
e
n
a
m
e
Press the arrow buttons to select the
scene you want to delete, and then
press the OK button.
Dolphin
Edit Scene
Copy
7 Scenes
4
23/APR/2004 06:43
Delete
MOVE OK
RETURN
EXIT
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
4/4
02
4
Play
Modify
Move
Press the …† buttons to select “Copy”,
and then press the OK button.
Playlist that has been selected at last will be copied.
01
00:00:26
00:00:07
03
00:00:04
Add
04
00:00:15
Delete
Edit Playlist
Length Edit
DVD-RAM(VR)
MOVE
OK
RETURN
EXIT
No. Title
01 Science
02 Sky
00:00:17
00:00:06
√
√
03 Dolphin
04 Natural
Play
Press the …† buttons to select “Delete”,
R
e
n
a
m
e
Dolphin
Edit Scene
Copy
5
and then press the OK button.
7 Scenes
23/APR/2004 06:43
Delete
Edit Scene
Playlist No.
DVD-RAM(VR)
Scene No.
MOVE
OK
RETURN
EXIT
4/3
02
4
Play
Modify
Move
Edit Playlist
Length Edit
DVD-RAM(VR)
No. Title
01
00:00:26
00:00:07
03
00:00:04
01 Science
02 Sky
00:00:17
00:00:06
00:00:06
00:00:37
00:00:06
√
√
√
√
√
Add
03 Dolphin
04 Natural
05 Dolphin
Delete
Dolphin
MOVE
OK
RETURN
EXIT
7 Scenes
23/APR/2004 06:43
MOVE OK
RETURN
EXIT
76- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:32 AM Page 77
Press the MENU button after the
Press the …† buttons to select “Delete”,
4
operation has finished.
3
and then press the OK button.
The menu screen will disappear.
Edit Playlist
Length Edit
DVD-RAM(VR)
No. Title
01 Science
02 Sky
00:00:17
00:00:06
√
√
●●
You can create up to 999 scenes on one
disc. In some cases, this may be different
from the actual numbers.
03 Dolphin
04 Natural
05 Dolphin
Play
R
e
n
a
m
e
NOTE
Dolphin
Edit Scene
7 Scenes
Copy
23/APR/2004 06:43
Delete
MOVE OK
RETURN
EXIT
●
You will be prompted with the delete confirmation
message 'Do you want to delete?'.
Deleting a Playlist Entry from
the Playlist
Edit Playlist
DVD-RAM(VR)
Do you want to delete?
Using the PLAYLIST button
Insert the recorded disc,
Yes
No
Dolphin
7 Scenes
23/APR/2004 06:43
MOVE OK
RETURN
EXIT
1
Press the PLAY LIST button.
The Edit Playlist screen is displayed..
Edit Playlist
DVD-RAM(VR)
No. Title
Length Edit
Press the œ √ buttons to select “Yes”,
and then press the OK button.
You automatically returned to the Edit Playlist screen
after the delete operation has finished.
01 Science
02 Sky
00:00:17
00:00:06
00:00:06
00:00:37
00:00:06
√
√
√
√
√
4
03 Dolphin
04 Natural
05 Dolphin
Science
7 Scenes
23/APR/2004 06:43
Edit Playlist
DVD-RAM(VR)
MOVE OK
RETURN
EXIT
Deleting...
(Please wait)
Using the MENU button
●
●
●
Press the MENU button. When the disc has
stopped.
Press the …† buttons to select Playlist, and then
press the OK or √ button.
Press the …† buttons to select Edit Playlist, and
then press the OK or √ button.
Dolphin
7 Scenes
23/APR/2004 06:43
MOVE
OK
RETURN
EXIT
Edit Playlist
Length Edit
DVD-RAM(VR)
No. Title
01 Science
02 Sky
00:00:17
00:00:06
00:00:06
00:00:37
√
√
√
√
Press the …† buttons to select the title
you want to edit from the Playlist, and
then press the OK or √ button.
The Edit Playlist menu is displayed.:Play, Rename,
Edit Scene, Copy, Delete
03 Dolphin
04 Natural
2
Natural
7 Scenes
23/APR/2004 06:43
MOVE OK
RETURN
EXIT
Edit Playlist
Length Edit
DVD-RAM(VR)
No. Title
01 Science
02 Sky
00:00:17
00:00:06
√
√
03 Dolphin
04 Natural
05 Dolphin
Play
R
e
n
a
m
e
Dolphin
Edit Scene
7 Scenes
Copy
23/APR/2004 06:43
Delete
MOVE OK
RETURN
EXIT
English -77
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:32 AM Page 78
Enter the desired characters using the
arrow buttons.
4
5
Disc Manager
Rename
DVD-RAM(VR)
Disc
A
F
K
P
U
Z
B
G
L
C
H
D
I
E
J
a
f
k
p
b
g
c
h
m
r
d
i
n
s
x
e
j
o
t
M
R
N
S
X
O
T
Y
l
q
Editing the Disc Name
Follow these instructions to give a name to a disc.
Q
V
u
z
n
w
y
W
Back Space
Space
Delete
Clear
Save
MOVE
OK
RETURN
EXIT
Press the arrow buttons to select “Save”
and then press the OK button.
A disc name is given to the disc.
Insert the disc, Press the MENU button
1
2
with the disc stopped.
Title List
DVD-RAM(VR)
Title List
Disc Manager
DVD-RAM(VR)
√
Disc Name
: Disc
: Not protected
√
√
√
√
√
Disc Protection
Disc Format
Delete All Title Lists
Cartridge Protection Info
MOVE
OK
RETURN
EXIT
MOVE
OK
RETURN
EXIT
Press the …† buttons to select “Disc
Manager”, and then press the OK or √
button.
●●
●●
You may need to clear cartridge protect or
disc protect before beginning editing.
NOTE
Disc Manager
DVD-RAM(VR)
Depending on the kind of disc, the
displayed screen may be different.
Disc Name
:
√
Disc Protection
Disc Format
: Not protected
√
√
√
√
Delete All Title Lists
Cartridge Protection Info
MOVE
OK
RETURN
EXIT
Press the …† buttons to select “Disc
Name”, and then press the OK or √
button.
3
The Edit Name screen is displayed.
Rename
DVD-RAM(VR)
A
F
K
P
U
Z
B
G
L
C
H
D
I
E
J
a
f
k
p
b
g
c
h
m
r
d
i
n
s
x
e
j
o
t
M
R
N
S
X
O
T
Y
l
q
Q
V
u
z
n
w
y
W
Back Space
Space
Delete
Clear
Save
MOVE
OK
RETURN
EXIT
78- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:32 AM Page 79
Disc Protection
Formatting a Disc
Disc Protect allows you to protect your discs from being
formatted or deleted due to unintended operations.
Use these instructions to format a disc. The cartridge
write protect tab should be set to the unprotect position.
The disc protect should also be cleared.
Press the MENU button with the disc
Insert the recorded to be formatted,
1
2
stopped.
1
2
Press the MENU button with the disc
stopped.
Title List
DVD-RAM(VR)
Title List
Title List
DVD-RAM(VR)
Title List
√
√
MOVE
OK
RETURN
EXIT
MOVE
OK
RETURN
EXIT
Press the …† buttons to select “Disc
Manager”, and then press the OK or √
button.
Press the …† buttons to select “Disc
Protection”.
Press the …† buttons to select “Disc
Manager”, and then press the OK or √
button.
Disc Manager
DVD-RAM(VR)
Disc Name
:
√
Disc Manager
DVD-RAM(VR)
Disc Protection
Disc Format
: Not protected
√
√
√
√
Disc Name
:
√
Delete All Title Lists
Disc Protection
Disc Format
: Not protected
√
√
√
√
Cartridge Protection Info
Delete All Title Lists
Cartridge Protection Info
MOVE
OK
RETURN
EXIT
MOVE
OK
RETURN
EXIT
Press the …† buttons to select “Disc
Format”, and then press the OK or √
button.
3
Press the OK or the √ button and then
3
press the …† button to select Protected.
Disc Manager
DVD-RAM(VR)
Disc Manager
DVD-RAM(VR)
Disc Name
:
√
Disc Name
:
√
Disc Protection
Disc Format
: Not protected
√
√
√
√
Disc Protection
Disc Format
Not Protected
√
√
Portected
Delete All Title Lists
Delete All Title Lists
Cartridge Protection Info
Cartridge Protection Info
MOVE
OK
RETURN
EXIT
MOVE
OK
RETURN
EXIT
DVD-RAM
●
You will be prompted with the confirmation
message 'Do you want to format disc?'.
Press the OK button.
4
Disc Manager
DVD-RAM(VR)
Disc Manager
DVD-RAM(VR)
Disc Name
:
√
Disc Name
:
√
Disc Protection
Disc Format
: protected
√
√
√
√
Disc Protection
: Not protected
√
√
√
Do you want to format disc?
Delete All Title Lists
Cartridge Protection Info
Yes
No
MOVE
OK
RETURN
EXIT
MOVE
OK
RETURN
EXIT
●
You will be prompted with the confirmation
message 'All data will be deleted. Do you
want to continue?'.
●●
Disc Protection will operate only if
cartridge protection has been cleared.
(DVD-RAM only)
NOTE
English -79
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:32 AM Page 80
DVD-RW
Press the …† buttons to select “Disc
Manager”, and then press the OK or √
button.
●
You will be prompted with the confirmation
2
3
message ‘Choose the recording format for
DVD- RW.’
Disc Manager
DVD-RAM(VR)
Disc Name
:
√
Disc Manager
DVD-RW(VR)
Disc Protection
Disc Format
: Not protected
√
√
√
√
Disc Name
:
√
Delete All Title Lists
Disc Protection
: Not protected
√
√
√
Cartridge Protection Info
Choose the recording format for DVD-RW.
DVD-VR
DVD-V
MOVE
OK
RETURN
EXIT
MOVE
OK
RETURN
EXIT
Press the …† button to select “Delete
All Title Lists”, and then press the OK
or √ button.
Press the œ √ buttons to select “Yes”,
and then press the OK button.
The disc is formatted.
4
Disc Manager
DVD-RAM(VR)
Disc Name
:
√
DVD-VR and DVD-V are defined according to
their recording format.
Disc Protection
Disc Format
: Not protected
√
√
√
√
Delete All Title Lists
Cartridge Protection Info
DVD-VR
Possible
DVD-V
Inconvenience
(Partial editing is
possible)
Editing
DISC
MOVE
OK
RETURN
EXIT
DVD-RAM
DVD-RW
DVD-RW
DVD-R
●
You will be prompted with the confirmation
message ‘Do you want to delete all title lists?'.
Disc Manager
DVD-RAM(VR)
Disc Name
:
√
Disc Protection
: Not protected
√
√
√
√
Do you want to delete all title lists?
Delete All Title Lists
Yes
No
MOVE
OK
RETURN
EXIT
Insert the recorded disc,
●
When Protected Entry exists: The Delete All Title
List function will not operate. If there is a title
containing a still picture, however, that function will
not operate. If you want to delete a protected entry,
disable Protect for it on the Lock item.
1
Press the MENU button with the disc
stopped.
Title List
DVD-RAM(VR)
Title List
√
●
Disc Protection: When Protected or Cartridge
Protection has been set, when a DVD-RAM is
used, data cannot be deleted from a disc.
MOVE
OK
RETURN
EXIT
Press the œ √ buttons to select “Yes”,
and then press the OK button.
All title lists are deleted.
4
80- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:32 AM Page 81
Cartridge Protection Info
Finalizing a disc
Disc Protection allows you to protect discs from disc
formatting and program deletion due to unintended
operations. The cartridge write protect tab should be set
to the unprotect position to be able to make a recording
to a DVD-RAM disc.
After you record titles onto a DVD-RW/DVD-R disc with
your DVD recorder, it needs to be finalised before it can
be played back on external devices.
Insert the recorded disc, Press the
1
2
MENU button with the disc stopped.
Insert the disc, Press the MENU button
1
2
with the disc stopped.
Title List
DVD-RW(VR)
Title List
√
Title List
DVD-RAM(VR)
Title List
√
MOVE
OK
RETURN
EXIT
MOVE
OK
RETURN
EXIT
Press the …† buttons to select “Disc
Manager”, and then press the OK or √
button.
Press the …† buttons to select “Disc
Manager”, and then press the OK or √
button.
Disc Manager
DVD-RW(VR)
Disc Manager
DVD-RAM(VR)
Disc Name
:
√
Disc Name
:
√
Disc Protection
Disc Format
: Not protected
: DVD-VR
√
√
√
√
Disc Protection
Disc Format
: Not protected
√
√
√
√
Disc Finalise
Delete All Title Lists
Delete All Title Lists
Cartridge Protection Info
MOVE
OK
RETURN
EXIT
MOVE
OK
RETURN
EXIT
Press the …† button to select “Disc
Finalise”, and then press the OK or √
button.
Press the …† buttons to select
“Cartridge Protect Info”, and then press
the OK or √ button.
3
3
The cartridge protection info for the disc is displayed.
Disc Manager
DVD-RW(VR)
●
If the disc cartridge is protected, open the disc tray
and check the disc.
Disc Name
:
√
Disc Protection
Disc Format
: Not protected
: DVD-VR
√
√
√
√
Disc Manager
DVD-RAM(VR)
Disc Finalise
Disc Name
:
√
Delete All Title Lists
Disc Protection
: Not protected
√
√
√
Disc cartridge is protected.
Open tray and check disc.
MOVE
OK
RETURN
EXIT
OK
MOVE
OK
RETURN
EXIT
Disc Manager
DVD-R(V)
Disc Name
:
√
Disc Protection
Disc Finalise
: Not protected
√
√
√
If the disc cartridge is not protected, proceed with
recording to the disc.
Delete All Title Lists
Disc Manager
DVD-RAM(VR)
Disc Name
:
√
Disc Protection
: Not protected
√
√
√
MOVE
OK
RETURN
EXIT
Disc cartridge is not protected.
Open tray and check disc.
OK
MOVE
OK
RETURN
EXIT
●●
Disc Protection will operate only if
cartridge protect is set to Not Protected.
NOTE
English -81
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:32 AM Page 82
You will be prompted with the message 'Do you want
Unfinalizing a disc (V/VR mode)
to finalise disc?'. If you select Yes, you will be prompt-
ed again with the message ' Disc will be finalised. Do
you want to continue?'
Disc Manager
DVD-RW(VR)
Disc Name
:
√
Insert the recorded disc, Press the
Disc Protection
: Not protected
√
√
√
1
MENU button with the disc stopped.
Do you want to finalise disc?
Yes
No
Title List
DVD-RW(VR:F)
Title List
√
MOVE
OK
RETURN
EXIT
Disc Manager
DVD-RW(VR)
Disc Name
:
√
Disc Protection
: Not protected
√
√
√
MOVE
OK
RETURN
EXIT
Disc will be finalised.
Do you want to continue?
Yes
No
Press the …† buttons to select “Disc
Manager”, and then press the OK or √
button.
2
3
MOVE
OK
RETURN
EXIT
Disc Manager
DVD-RW(VR:F)
Disc Name
Press the œ √ buttons to select “Yes”,
and then press the OK button.
The disc is finalised.
:
√
Disc Format
: DVD-VR
√
√
4
Disc Unfinalise
MOVE
OK
RETURN
EXIT
●●
Once a disc is finalised, you cannot
delete entries from the record list.
NOTE
●●
After being finalised, the DVD-R/DVD-
RW(video mode) operates in the same
manner as a DVD-Video.
Press the …† button to select “Disc
Unfinalise”, and then press the OK or √
button.
You will be prompted with the message 'Do you want
to unfinalise disc?'.
●●
Depending on the kind of disc, the
displayed screen may have a slight
difference.
●●
Finalizing time may be different
Disc Manager
DVD-RW(VR:F)
Disc Name
depending on the amount of data
recorded on the disc.
:
√
Disc Format
: DVD-VR
√
√
●●
Data on the disc will be damaged if the
recorder is powered off during finalise
process.
Do you want to unfinalise disc?
Yes
No
MOVE
OK
RETURN
EXIT
If you select Yes, you will be prompted again with the
message ' Disc will be unfinalised. Do you want to
continue?'
Disc Manager
DVD-RW(VR:F)
Disc Name
:
√
Disc Format
: DVD-VR
√
√
Disc will be unfinalised.
Do you want to continue?
Yes
No
MOVE
OK
RETURN
EXIT
82- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_66~83 8/31/04 10:32 AM Page 83
Press the œ √ buttons to select “Yes”,
4
and then press the OK button.
The disc is unfinalised.
●●
A DVD-RW can be finalised or unfinalised
in Video mode.
NOTE
Finalise
DVD-Video(RW)
Unfinalise
DVD-RW(V)
Mark
Additional recording, protection
and deletion are possible.
Operation Same as DVD-Video
●●
A DVD-RW can be finalised or unfinalised
in VR mode.
Finalise
Unfinalise
Mark
DVD-RW(VR:F)
DVD-RW(VR)
Additional recording,
deletion, editing, and
Additional recording,
deletion, editing, and
protection are possible.
Operation
protection are impossible.
English -83
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_84~88 8/31/04 10:32 AM Page 84
Troubleshooting
Additional
If your product malfunctions, go through the check-
points below before contacting a Toshiba authorized
service center.
Information
Power
The input is displayed for a while when the
power is turned on.
The DVD recorder requires some time
Checkpoint 1
to initialize and the input will be
displayed for approx. 10 seconds after
it is turned on.
Recording
Cannot record TV programs.
Check whether the power cord is
Checkpoint 1
securely plugged into the power outlet.
Checkpoint 2
Did you set the DVD recorder channel
settings correctly?
Checkpoint 3
Check the free space on your
DVD-RAM/DVD-RW/DVD-R discs.
I pressed the REC button but there is no response.
Recording is possible for DVD-
Checkpoint 1
RAM/DVD-RW/DVD-R discs only.
If a program is copy protected, it cannot
be recorded.
Troubleshooting................................................84
Specification......................................................88
84- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_84~88 8/31/04 10:32 AM Page 85
Differences between Using REC PAUSE Button and
Using Stop Button during Recording
Play mode settings are different from the settings
configured in the Settings menu.
The disc does not support all selected
Checkpoint 1
Each press of the Stop button during
Checkpoint 1
functions. In this case, some settings
configured in the settings menu may
not work properly.
recording creates a title. When the REC
PAUSE button is pressed, the paused
state is kept. When the REC PAUSE
button is pressed again during REC
pause, the title under pause will be kept
recording.
Cannot change the aspect ratio.
Playback
The aspect ratio is fixed for DVD discs.
Checkpoint 1
(See page 30.)
Cannot play the disc.
The angle operation does not work while playing a
DVD disc.
Check whether the disc is inserted
correctly with the label facing up.
Checkpoint 1
Checkpoint 2
Check the regional code of the DVD
disc.
The angle operation is available only
when the disc contains images
captured from different angles.
Checkpoint 1
Checkpoint 3
This DVD recorder cannot play some
types of discs. (See page 5, 47.)
icon appears on the screen.
The selected audio and/or subtitle language is not
played.
You cannot use this operation or
function due to one of the following
reasons:
Checkpoint 1
(1) Your DVD disc restricts it.
(2) Your DVD disc does not support this
feature (for example: angles)
(3) The feature is not available at the
moment.
Audio and subtitle languages are
Checkpoint 1
disc-specific. Only the sound and
subtitle languages contained on the
DVD disc are available and displayed in
the disc menu.
(4) You've requested a title, chapter, or
scan time that is out of range.
English -85
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_84~88 8/31/04 10:32 AM Page 86
Video
Timer Recording
The disc revolves, but no image or bad quality
images are displayed.
Timer lamp flickers.
Check there is enough space in the
disc for recording.
Checkpoint 1
Checkpoint 2
Check whether there is damage to or
any foreign material on your disc.
Checkpoint 1
Check whether the current disc is
recordable or not.
Make sure to check before the start
time of recording.
Checkpoint 2
Some low quality discs may not play
properly.
Checkpoint 3
If scenes change from dark to bright
suddenly, the screen may shake
vertically temporarily, but this is not a
fault.
Timer recording does not work properly.
Sound
Re-check the recording time and the
end time settings again.
Checkpoint 1
Checkpoint 2
No sound.
Recording will be cancelled, if the
power is disconnected due to a power
failure or another similar reason while
recording.
Are you watching a program in slow or
Checkpoint 1
skip mode?
If you are playing a program at a speed
other than normal speed, sound will not
be heard.
Checkpoint 2
Check the connections and settings.
Checkpoint 3
Check whether the disc is damaged.
Clean the disc, if necessary.
Checkpoint 4
Check whether the disc is inserted
correctly with the label facing up.
No audio output.
Check whether you have selected the
Checkpoint 1
correct digital output options in the
Audio Output Options menu.
(See page 31.)
86- English
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_84~88 8/31/04 10:32 AM Page 87
Remocon
Other problems.
The remote control doesn't work.
Read the table of contents and then
Checkpoint 1
find and read the section describing
your problem, and follow the
instructions given.
Point the remote control at the remote
Checkpoint 1
Checkpoint 2
Checkpoint 3
control sensor on your DVD recorder.
Allow for proper distance. Remove
obstacles between your DVD recorder
and the remote control.
Turn your DVD recorder off and on.
If the problem still persists, contact a
nearby Toshiba service center.
Checkpoint 2
Checkpoint 3
Check whether the batteries are empty.
Check for the TV/DVD selection button.
Other
I forget my password for parental supervision.
Checkpoint 1
Press the ( ) and ( ) buttons on
your DVD recorder simultaneously
when the power is on. All settings
including the password will revert to the
factory settings. Do not use this unless
absolutely necessary.
(Note that this function is possible only
when no disc is inserted.)
Is it possible to change a subtitle and an audio sig-
nal on a recorded disc?
A recorded disc is played with only the
Checkpoint 1
subtitle and the audio signal which
were selected during recording.
English -87
Download from Www.Somanuals.com. All Manuals Search And Download.
00566A-D-R3_84~88 8/31/04 10:32 AM Page 88
Specifications
Power requirements
Power consumption
230V AC, 50Hz
35 Watts
Weight
General
3.75Kg
Dimensions
430mm(W) x 280mm(D) x 68.5mm(H)
+5°C to +35°C
Operating temp.
Other conditions
Keep level when operating. Less than 75% operating humidity
Composite Video : 1.0 V p-p at 75Ω load, sync negative
S-Video input (Y: 1.0Vp-p, C: 0.286Vp-p at 75Ω load)
Max.Audio Input Level : 2Vrms
IEEE 1394(4p) compatible jack
PAL I
Video (AV3, AV4)
Audio(AV3, AV4)
Input
DV Input
Receivable Channels
AV1 (Scart TV)
Scart Jack
Video : Composite, Audio: analogue
Video : Composite, RGB Audio: analogue
Analogue output jacks 1, 2
AV2 (Scart Ext)
Audio
Optical/Coaxial digital audio output
Full scale Analogue output level : 2Vrms
Composite Video : Video output jack 1
S-Video output 1 (Y:1.0Vp-p, C:0.286Vp-p at 75Ω load)
Output
Video
AV1 (Scart TV) Video : Composite, RGB Audio: analogue
AV2 (Scart Ext) Video : Composite Audio: analogue
Picture Compression format MPEG-II
Scart Jack
Audio Compression format
Dolby Digital 2ch/256kbps, MPEG-II
XP (about 8 Mbps), SP (about 4 Mbps), LP (about 2 Mbps),
EP (about 1.2 Mbps), FR (about 1.2 Mbps to 8 Mbps)
Recording
Recording Quality
Audio Frequency Response 20 Hz ~ 20 kH
For DVD discs, audio signals recorded at 96kHz sampling
Audio Output
frequency are converted and output at 48kHz.
Disc Type
DVD
48 / 96kHz
48kHz
AUDIO CD(CDDA)
Analogue Audio Output
Digital Audio Output
44.1kHz
44.1kHz
88- English
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Toshiba Air Conditioner RAV SM1102AT E User Manual
Toshiba Digital Camera IK WD12A User Manual
Toshiba Paper Shredder KD 1025 User Manual
Triarch Indoor Furnishings 33223 User Manual
Tricity Bendix Freezer FD 845 User Manual
Turbosound Speaker B 12DP User Manual
Tyco Thermometer FILAC User Manual
Uniden Car Satellite Radio System GMR635 2 User Manual
Vax Vacuum Cleaner C91 P2 User Manual
Vision Fitness Bicycle Fitness Bike User Manual