Toshiba Blu ray Player BDX2300KC User Manual

Blu-ray Disc™/DVD Player

User’s Guide:

BDX2300KC/BDX3300KC

If you need assistance:

❖

Toshiba’s Support Web site

www.toshiba.ca/support

Toshiba Customer Support Center

Please contact our Customer Service Department at: 1-800-268-3404

For more information see “Troubleshooting & Maintenance” on page 42 in this guide.

Owner's Record

The model number and serial number are on the back and underside of your player.

Record these numbers in the spaces below. Refer to these numbers whenever you

communicate with your Toshiba dealer about this equipment.

Model name______________________________________

Serial number____________________________________

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY PRECAUTIONS

The lightning flash with an arrowhead symbol, within the equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within the equilateral triangle is intended to

alert the user to the presence of important operating and

maintenance (servicing) instructions in this User’s Guide.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS

HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT

OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL

ONLY.

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO

WIDE SLOT OF AC POWER UTLET, THEN FULLY INSERT.

CAUTION: This Blu-ray Disc™/DVD player employs

System.

Laser Warnings:

•

The mains plug is used as disconnect device and it should

To ensure proper use of this product, please read this User’s Guide

carefully and retain for future reference. Should the unit require

maintenance, contact an authorized service location. Use of

controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the

enclosure. Visible and invisible laser radiation when open and

interlocks defeated. DO NOT STARE INTO BEAM.

remain readily operable during intended used. In order to

disconnect the apparatus from the mains completely, the main

plug should be disconnected from the mains socket outlet

completely.

The apparatus shall not be exposed to dripping or splashing

and that no objects filled with liquid, such as vases, shall be

placed on the apparatus.

Minimum 10 cm (4 inches) distances around the apparatus for

sufficient ventilations.

The ventilation should not be impeded by covering the

ventilation openings with items such as newspaper, tablecloths,

curtains, etc.

•

The symbol for Class II

(Double lnsulation)

CLASS 1

LASER PRODUCT

•

No naked flame sources such as lighted candles should be

placed on the apparatus.

The use of apparatus in moderate climates.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

7. Do not block any of the ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades

and a third grounding prong. The wide blade or the third prong

is provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the

obsolete outlet.

13. Unplug this apparatus during lightning

storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as the power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADDITIONAL SAFETY INSTRUCTIONS

15. Do not overload wall outlets; extension cords, or integral

convenience receptacles as this can result in a risk of fire or

electric shock.

• in a confined space such as a bookcase, built-in cabinet, or

any other place with poor ventilation.

The slots and openings are provided to protect the unit from

overheating and to help maintain reliable operation.

16. Never expose the apparatus to dripping or splashing or place

items such as vases, aquariums, any other item filled with

liquid, or candles on top of the unit.

21. Do not use a cracked, deformed, or repaired disc. These discs

are easily broken and may cause serious personal injury and

apparatus malfunction.

22. If the apparatus should emit smoke or an unusual odor,

immediately disconnect the power cord from the wall outlet.

Wait until the smoke or smell stops, then ask your dealer for a

check and repair. Neglecting to do so may cause fire.

17. Keep your fingers well clear of the disc tray as it is closing.

Neglecting to do so may cause serious personal injury.

18. Do not place anything on top of this unit.

19. Do not place the apparatus on amplifiers or equipment that

may produce heat.

23. During thunderstorms, do not touch the connecting cables or

20. Never block or cover the slots or openings in the unit. Never

place the unit:

the apparatus.

24. Warning: To prevent spread of fire, keep candles or other

open flames away from this product at all times.

• on a bed, sofa, rug or similar surface;

• too close to drapes, curtains, or walls; or

Location of the required label

Products that earn the ENERGY STAR

prevent green house gas emissions by

meeting strict energy efficiency guidelines set

by the U.S. Environmental Protection Agency

and the U.S. Department of Energy. ENERGY

STAR and the ENERGY STAR mark are

registered U.S. marks.

The rating plate and

the safety caution

are on the rear of

the unit.

USA

Wireless Radio

Federal Communications Commission Statement

For product available in the USA/Canada market, only channel 1-

11 can be operated. Selection of other channels is not possible.

The device could automatically discontinue transmission in case of

absence of information to transmit, or operational failure. Note that

this is not intended to prohibit transmission of control or signaling

information or the use of repetitive codes where required by the

technology. If this device is going to be operated in 5.15-5.25GHz

frequency range, then it is restricted to an indoor environment only.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) This device must accept any

interference received, including interference that may cause

undesired operation.

Interference

Important

Any changes or modifications not expressly

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

approved by the party responsible for compliance could void the

user's authority to operate this equipment. This device and its

antenna(s) must not be co-located or operating in conjunction with

any other antenna or transmitter.

against harmful interference in

residential installation. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

FCC Radiation Exposure Statement

instructions, may cause harmful interference to radio This equipment complies with FCC radiation exposure limits set

communications. However, there is no guarantee that interference forth for an uncontrolled environment. This equipment should be

will not occur in a particular installation. If this equipment does installed and operated with minimum distance 20cm between the

cause harmful interference to radio or television reception, which radiator & your body.

can be determined by turning the equipment off and on, the user is

Canada

encouraged to try to correct the interference by one of the following

Industry Canada Statement

measures:

This device complies with RSS-210.

•

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from (1) This device may not cause harmful interference, and

that to which the receiver is connected.

Operation is subject to the following two conditions:

(2) This device must accept any interference received, including

•

Consult the dealer or an experienced radio/TV technician for

help.

interference that may cause undesired operation of the device.

This device and its antenna(s) must not be co-located or operating

in conjunction with any other antenna or transmitter.

This Class B digital apparatus complies with Canadian CES-003.

Download from Www.Somanuals.com. All Manuals Search And Download.

Wireless Radio

Important: Any changes or modifications not expressly approved

by the party responsible for compliance could void the user's

authority to operate this equipment.

For product available in the USA/Canada market, only channel 1-

11 can be operated. Selection of other channels is not possible.

The device could automatically discontinue transmission in case of IMPORTANT NOTE:

absence of information to transmit, or operational failure. Note that

IC Radiation Exposure Statement: This equipment complies with

this is not intended to prohibit transmission of control or signaling

information or the use of repetitive codes where required by the

technology.

IC RSS-102 radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

PRECAUTIONS

Notes on handling

Inspection and Maintenance

•

When shipping the Blu-ray Disc™/DVD player, the original This Blu-ray Disc™/DVD player is a high technology, precision

shipping carton and packing materials come in handy. For device. If the optical pick-up lens and disc drive parts become dirty

maximum protection, repack the unit as it was originally packed or worn down, the picture quality may be reduced. To avoid

at the factory. Take care not to give it a shock or shake when reduction in picture quality, it is recommended that regular

carrying.

inspection and maintenance (cleaning or parts replacement) be

performed every 1,000 hours of use. For further details, contact

your nearest consumer electronics dealer.

•

Do not use volatile liquids, such as insect spray, near the

Blu-ray Disc™/DVD player. Do not leave rubber or plastic

products in contact with the Blu-ray Disc™/DVD player for a

long time. They will leave marks on the finish.

The top and rear panels of the Blu-ray Disc™/DVD player may

become warm after

malfunction.

Notes on moisture condensation

Moisture condensation damages the Blu-ray

Disc™/DVD player. Please read the following

carefully.

long period of use. This is not

•

When the Blu-ray Disc™/DVD player is not in use, be sure to

remove the disc and turn off the power.

If you do not use the Blu-ray Disc™/DVD player for a long outside of the glass. In the same way, moisture may condense on

period, the unit may not function properly in the future. Turn on the optical pick-up lens inside this unit, one of the most crucial

and use the Blu-ray Disc™/DVD player occasionally.

Moisture condensation occurs, for example, when you pour a cold

drink into a glass on a warm day. Drops of water form on the

internal parts of the Blu-ray Disc™/DVD player.

Notes on locating

Moisture condensation occurs during the

following cases.

Place the Blu-ray Disc™/DVD player on a level surface. Do not

use it on a shaky or unstable surface such as a wobbling table or

inclined stand. The loaded disc may come off the proper position

and cause damage to the Blu-ray Disc™/DVD player.

When you bring the Blu-ray Disc™/DVD player directly from a cold

place to a warm place.

When you use the Blu-ray Disc™/DVD player in a room where you

just turned on the heater, or a place where the cold wind from the

air conditioner directly hits the unit.

When you place this Blu-ray Disc™/DVD player near a TV, radio,

or VCR, the playback picture may become poor and the sound

may be distorted. In this case, place the Blu-ray Disc™/DVD

player away from the TV, radio, or VCR.

In summer, when you use the Blu-ray Disc™/DVD player in a hot

and humid place just after you move the unit from an air

conditioned room.

Do not use this player in places which are extremely hot, cold,

dusty or humid.

When you use the Blu-ray Disc™/DVD player in a humid place.

Do not use the Blu-ray Disc™/DVD player when

moisture condensation may occur.

Do not restrict the air flow of this player by placing it somewhere

with poor air flow, by covering it with a cloth, or by placing it on

bedding or carpeting.

If you use the Blu-ray Disc™/DVD player in such a situation, it may

damage discs and internal parts. Remove the disc, connect the

power cord of the Blu-ray Disc™/DVD player to the wall outlet, turn

on the Blu-ray Disc™/DVD player, and leave it for two or three

hours. After two or three hours, the Blu-ray Disc™/DVD player will

have warmed up and evaporated any moisture. Keep the Blu-ray

Disc™/DVD player connected to the wall outlet and moisture

condensation will seldom occur.

Be sure to remove the disc and unplug the AC power cord from the

outlet before carrying the player.

Notes on cleaning

Use a soft, dry cloth for cleaning.

•

For stubborn dirt, soak the cloth in a weak detergent solution,

wring well and wipe. Use a dry cloth to wipe it dry.

Do not use any type of solvent, such as thinners and benzene,

as they may damage the surface of the Blu-ray Disc™/DVD

player.

On Safety

Do not handle the AC power cord with wet hands and do not put

your fingers or objects into the player.

•

If you use a chemical saturated cloth to clean the unit, follow

that product's instructions.

When connecting or disconnecting the AC power cord, grip the

plug and not the cord itself. Pulling the cord may damage it and

create a hazard.

Download from Www.Somanuals.com. All Manuals Search And Download.

When you are not going to use the unit for a long period of time, Batteries should never be thrown away or incinerated but disposed

disconnect the AC power cord.

of in accordance with your local regulations concerning chemical

wastes.

On Recycling

This unit’s packaging materials are recyclable and can be reused.

Please dispose of any materials in accordance with your local

recycling regulations.

NOTES ON DISCS

On handling discs

Do not touch the playback side of the disc.

On cleaning discs

Fingerprints and dust on the disc cause picture and sound

deterioration. Wipe the disc from the center outwards with a soft

cloth. Always keep the disc clean.

Playback side

Do not attach paper or tape to discs.

If you cannot wipe off the dust with a soft cloth, wipe the disc lightly

with a slightly moistened soft cloth and finish with a dry cloth.

Do not use any type of solvent such as thinner, benzine,

commercially available cleaners or antistatic spray for vinyl LPs. It

may damage the disc.

On storing discs

Do not store discs in a place subject to direct sunlight or near heat

sources.

Do not store discs in places subject to moisture and dust such as a

bathroom or near a humidifier.

Store discs vertically in a case. Stacking or placing objects on discs

outside of their case may cause warping.

This guide is copyrighted by Toshiba America Information however, with respect to the use of the information contained

this guide cannot be reproduced in any form without the prior

written permission of Toshiba. No patent liability is assumed,

reserved.

Trademarks

AVCHD and the AVCHD logo are trademarks of Panasonic

Manufactured under license from Dolby

Laboratories. Dolby, Pro Logic, and the double-

D symbol are trademarks of Dolby Laboratories.

Corporation and Sony Corporation.

Blu-ray Disc™, Blu-ray™, BD-Live™ and BONUSVIEW™ and the

logos are trademarks of the Blu-ray Disc Association.

Manufactured under license under U.S.

Patent Nos: 5,956,674; 5,974,380; 6,226,616;

6,487,535; 7,392,195; 7,272,567; 7,333,929;

7,212,872 & other U.S. and worldwide patents

CinemaNow is a registered trademark of Best Buy, Inc.

DLNA^®, the DLNA Certification Logo and DLNA CERTIFIED™ are

trademarks, service marks, or certification marks of the Digital

Living Network Alliance.

issued

pending. DTS-HD, the Symbol,

DTS-HD and the

DTS-HD Master

Symbol together are registered trademarks

Audio | Essential is a trademark of DTS, Inc. Product includes

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD is a trademark of DVD Format/Logo Licensing Corporation.

Oracle and Java are registered trademarks of

Oracle and/or its affiliates. Other names may

be trademarks of their respective owners.

HDMI, the HDMI logo, and High-Definition

Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC

in the United States and other countries.

Picasa is a trademark of Google Inc.

Microsoft, Outlook, Windows, and Windows Media are either

registered trademarks or trademarks of Microsoft Corporation in

the United States and/or other countries.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi

Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi

Alliance.

Windows Media and the Windows logo are "x.v.Color" and "x.v.Color" logo are registered trademarks of Sony

trademarks or registered trademarks of Corporation.

Microsoft Corporation in the United States

YouTube is a registered trademark of Google Inc.

and/or other countries.

All other brand and product names are trademarks or registered

trademarks of their respective companies.

Netflix is a registered trademark of Netflix, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Safety icons

This guide contains safety instructions that must be observed to avoid potential hazards that

could result in personal injuries, damage to your equipment, or loss of data. These safety cautions

have been classified according to the seriousness of the risk, and icons highlight these

instructions as follows:

Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury.

Indicates a potentially hazardous situation which, if not avoided, may result in property

damage.

Provides important information.

Package contents

❖

Remote Control (SE-R0418) with Batteries (1 set of 2 AAA)

Quick Start Guide

Symbols used in this manual

The following symbols indicate the corresponding operation.

Symbol:

Operation:

BD-video and BD-RE/BD-R recorded in BDMV format

DVD-video

Audio CD/DTS^®-CD

DVD-RW/-R with AVCHD™ files

BD-RE/-R, DVD-RW/-R and CD-RW/-R with MP3 files

BD-RE/-R, DVD-RW/-R and CD-RW/-R with WMA files

BD-RE/-R, DVD-RW/-R and CD-RW/-R with JPEG files

Download from Www.Somanuals.com. All Manuals Search And Download.

Features

If any of the symbols listed above are not displayed under the function heading, the operation

is applicable to all media.

Features

Blu-ray Disc™: Enjoy Blu-ray Disc™ viewing and storage, capable of storing five times more

data than a conventional DVD.

BD-Java™: Enjoy the interactive functions such as games or interactive menus, supported

Java™ applications.

BD-Live™: BD-ROM version 2 Profile 2.0 allows interactive functionality when this player is

connected to the Internet, in addition to the BONUSVIEW™ function. The various functions

differ depending on the disc type.

Full high-definition video playback: Watch movies in the highest picture quality available for

your HDTV. This player offers full high-definition video playback up to 1080p resolution for an

amazing viewing experience. A highly detailed picture and increased sharpness delivers a more

true-to-life picture.

DVD Upconversion for enhanced picture quality: Your current DVD will look even better than

before thanks to video upconversion. Upconversion will increase the resolution of standard

definition DVD to near high definition up to 1080p over an HDMI^®connection. The picture will

be less jagged and more realistic for a near high-definition experience.

Enjoy your content on different kinds of media: Full backwards compatibility with Blu-ray

Disc™, DVD and CD ensures that you can continue to enjoy your current audio-video collection.

Additionally, you can view JPEG digital pictures or listen to MP3 or Windows Media™ Audio

music files.

PIP: Some BD-videos have the PIP function which enables you to display the secondary video in

the primary video. You can call up the secondary video by pressing PIP on the remote whenever

the scene contains the secondary video.

Pop-up menu: Some BD-video have pop-up menu which is a navigation menu that can be called

up and be operated on the TV screen without interrupting the playback. You can call up the pop-

up menu by pressing POP UP/MENU or TOP MENU on the remote. Contents in the pop-up

menu vary depending on the disc.

Playing back AVCHD™ files: This player supports playback of AVCHD™ format files (new

format for high definition video camcorders) recorded on disc. Your high definition personal

archive is playable in HD quality.

x.v.Color^®: This player supports playback of video contents on discs recorded with “x.v.Color^®”

technology. To watch this video content with the “x.v.Color^®”, a TV or other display device

supporting both video image reproduction using the “x.v.Color^®” standard and capable of

manually switching its color setting is required. Please refer to the User’s Guide of your display

device for further information.

Wi-Fi CERTIFIED^®(for model BDX3300KC): The Wi-Fi CERTIFIED^®logo is an assurance

that Wi-Fi^®Alliance has tested a product in numerous configurations and with a diverse sampling

of other devices to ensure compatibility with other Wi-Fi CERTIFIED^®equipment that operates

in the same frequency band.

Easy and simple connection to your HDTV via HDMI^®: Connect this player to your HDTV

with one single HDMI^®(High-Definition Multimedia Interface) cable. It is recommended to use

a High Speed HDMI^®Cable for better compatibility. The high definition video output signal will

be transferred to your HDTV without conversion to analog signals, so you will get excellent

picture and sound quality.

HDMI^®-CEC (Consumer Electronics Control): This player supports HDMI^®-CEC, which

allows integrated system control over HDMI^®and is part of the HDMI^®standard. This function

may not work properly on some devices.

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™/DVD player controls

HDMI^®1080p/24F output (Blu-ray Disc™ only): This player is equipped with a feature which

can provide the smooth movement in the playback of film originated material with the frame rate

of 24 frames per second with progressive scan. (Available only when the TV is connected by an

HDMI^®cable and compatible with 1080p/24F frame input.)

via an HDMI^®connection, it is necessary that both the player and the TV (or an AV amplifier)

support a copyright protection system called HDCP (high bandwidth digital content protection

system). HDCP is copy protection technology that comprises data encryption and authentication

of the connected AV device. This player supports HDCP. Please read the operating instructions of

your TV (or AV amplifier) for more information.

Blu-ray Disc™/DVD player controls

Front panel

3 4 5 6 7

(Sample Illustration) Front panel controls

Item: Operation:

Disc tray

Power indicator light

Remote sensor

Open/Close (

)

Stop ( ) button

Play ( ) button

Power ( ) button

Press to turn on the player or place it into standby mode.

NOTE: To completely turn the player off, you must unplug the AC power cord.

USB port

Use to connect a USB flash drive/wireless LAN adapter (not included).

Back panel

(Sample Illustration) Back panel connections

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control buttons

Item: Description

Function:

AC power cord

Connects to a standard AC outlet to supply power to the player.

To completely turn off the player, unplug the AC power cord.

Coaxial Digital Audio Out port

HDMI^®Out port

Connects an AV receiver/amplifier, Dolby^®Digital/DTS^®

decoder, or other device using a coaxial digital audio cable.

Connects to a TV with an HDMI^®compatible port via an HDMI^®

cable.

HDMI^®connection is required for this player to operate properly.

(HDMI^®cables available only with certain models).

NOTE: Analog connection is not supported.

LAN port

Connects network capable external devices.

Remote control buttons

(Sample Illustration) Remote control buttons

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control buttons

Item: Description:

Operation:

OPEN/CLOSE

GOTO

Press to open or close the disc tray.

Press to display the search menu.

During playback, press to fast reverse the playback.

REV

SKIP

During playback, press once to return to the beginning of the current

title, chapter, track or file.

During playback, press twice to return to the previous title, chapter,

track or file.

During the JPEG playback, press to return to the previous file.

PAUSE

STEP

Press to pause playback.

Press to advance one frame.

SLOW

Press to play back the disc slow motion.

Press to display HOME menu.

HOME

RETURN

PROGRAM

DIGEST

SUB (Subtitle)

AUDIO

Press to return to the previous menu.

Press to create program list for DVD/CD disc.

Press to display the thumbnail view for JPEG.

Press to select the subtitle language.

Press to select the audio language.

A-B

Press to play back a defined section between point A and B repeatedly.

Press to toggle between various repeat modes.

REPEAT

POWER

Press to turn on the unit, or to turn the unit into the standby mode. (To

completely turn off the unit, you must unplug the power cord.)

Number buttons

In playback mode, press GOTO, then input the numbers using the 0-9

number buttons to enter a title, chapter, track, time or file number.

In menu mode, use the number buttons to enter the parental code

password.

CLEAR

OSC

Press to clear an input error.

Press to display the OSC (On Screen Control) menu.

Press to display a top menu.

TOP MENU

PIP

Press to switch picture-in-picture feature on or off (only applicable to

BD-video which supports the PIP function).

POP UP/MENU

During Blu-ray Disc™ playback, press to open a menu that lets you

control Blu-ray Disc™ playback.

During DVD playback, press to open the DVD menu (if available).

FWD

PLAY

SKIP

During playback, press to fast forward the playback.

Press to start playback or resume playback.

During playback, press to skip to the next title, chapter, track or file.

During the JPEG playback, press to go to the next file.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control buttons

Item: Description:

Operation:

STOP

Press to stop playback.

Press to select items or settings.

NETFLIX^®

Press to confirm or select menu items.

Press to use Netflix service directly. (Make sure your Blu-ray

Disc™/DVD player is correctly connected to the Internet and network

settings are properly configured.)

RED/GREEN/

YELLOW/BLUE

Press to select items on some Blu-ray Disc™ contents.

When file list / thumbnail list is shown, press to switch between

pages.

BOOKMARK

ZOOM

Press to set your favorite bookmark for DVDs.

Press to zoom in / out the image for DVD / JPEG discs.

ANGLE

Press to select a viewing angle if multiple angles are available on the

disc.

2nd. AUDIO

CONNECTED

DISPLAY

In PIP mode, press to turn the audio for the secondary video on or off.

Press to display the CONNECTION menu.

Press to display operating status.

Installing the batteries

Install the batteries (AAAx2), matching the polarity indicated inside battery compartment of the

remote control.

Open the battery cover.

(Sample Illustration) Remote control - Opening the battery cover

Insert batteries.

Make sure to match the polarity marks (+ / -) on the batteries to the marks indicated in the

battery compartment.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control buttons

(Sample Illustration) Remote control - inserting the batteries

Replace the battery cover.

Always dispose of used batteries in compliance with your local government.

Never throw batteries into a fire.

Do not mix different battery types or combine used batteries with new ones.

If the remote control does not operate correctly, or if the operating range is reduced, replace

both batteries with new ones.

If the batteries are dead or if you will not be using the remote control for a long time, remove

the batteries to prevent battery acid from leaking into the battery compartment.

Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type.

When discarding batteries, environmental problems must be considered and local rules or

laws governing the disposal of these batteries must be strictly followed.

Using the remote control

Point the remote control at the remote sensor and press the buttons:

(Sample Illustration) Remote control angle

Distance: Approximately 5m from the front of the remote sensor.

Angle: About 30° in each direction from the front of the remote sensor.

Do not expose the remote sensor to a strong light source such as direct sunlight or other

illumination. This can damage the sensor resulting in the inability to operate the Blu-ray

Disc™/DVD player via the remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™/DVD player connections

Do not drop or expose the remote control to electric shock.

Do not expose the remote control to excessively hot or humid places.

Do not spill water or place anything wet on the remote control.

Do not open the remote control.

If the remote control is not going to be used for a long period of time, remove the battery to

avoid damage caused by battery leakage corrosion.

Direct the remote control at the remote sensor of the Blu-ray Disc™/DVD player.

When using the remote control, press the buttons at intervals of approximately 1 second to

ensure the correct mode of operation.

Blu-ray Disc™/DVD player connections

Connecting to a TV using an HDMI^®cable

This connection provides better picture quality and supports up to 1080i/1080p, 1080p/24F

resolution.

Connect an HDMI^®cable from the HDMI^®output jack on the player to the HDMI^®input jack on

the TV.

High

Definition

(Sample Illustration) Connecting to a TV - HDMI^®cable

HDMI^®connection is required. (HDMI^®cable sold separately).

Analog connection is not supported.

Do not tilt the connector when inserting it into the HDMI^®jack, and make sure the shapes of

the jack and the connector are matched.

When using a non-HDCP compatible TV, the image may not display properly.

An HDMI^®cable carries both video and audio signals. If you wish to use TV speakers, you do

not need to make an additional audio connection if you are using an HDMI^®cable.

Connecting to a digital amplifier/AV receiver

Route the sound from this player to your AV receiver or amplifier to enhance audio output.

❖

Connect a coaxial cable from the Coaxial Digital jack on the player to the Coaxial jack on

your AV receiver or amplifier.

❖

If your AV receiver or amplifier has an HDMI^®jack, you can also connect the HDMI^®

cable to the HDMI IN jack on your AV receiver or amplifier.

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™/DVD player connections

DIGITAL AUDIO INPUT

COAXIAL

(Sample Illustration) Connecting to a digital amplifier/AV receiver

Connecting to a network

Your Blu-ray Disc™/DVD player can be connected to your home network:

❖

By using a wired network. This provides the best performance, because the attached device

and player are connected directly to the network and are not subject to radio frequency

interference.

❖

By connecting through a wireless LAN adaptor and a wireless access point or router (for

BDX2300KC model).

By connecting through the built-in wireless device and a wireless access point or router (for

BDX3300KC model).

Connecting via wired router

Connect one end of an Ethernet cable (CAT5 or better with RJ45 connector) to the Ethernet jack

on the front of your player, and the other end to a wired hub or broadband router.

Hub or broadband router

Networking equipment

(modem, etc.)

WAN

LAN

LAN cable

LANcable

Internet

(Sample Illustration) Connecting to a wired router

Do not connect a modular phone cable to the Ethernet jack.

When plugging or unplugging the cable, hold the connector on the end of the cable.

When unplugging, do not pull on the cable. Press down the lock tab, and then pull the

connector out of the jack.

Because there are various connection configurations, follow the instructions from your

telecommunication carrier or Internet service provider.

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™/DVD player connections

Connecting via wireless access point or router - for BDX2300KC model

Your Blu-ray Disc™/DVD player can also be connected to a network via a Wireless access point.

USB Wi-Fi^®adapter is not included and is required for a wireless connection.

This unit is compatible with TOSHIBA's USB Wi-Fi^®adapter only. Model name:

WLM-12NB1.

A wireless AP/IP router is required to create a wireless network connection.

Connect the wireless LAN adapter to the USB port on the front panel of the Blu-ray

Disc™/DVD player, and set the wireless network options.

After the Wi-Fi^®device is inserted into the USB port, press the (

) arrow buttons to select

Network from the Settings menu, and press the OK button to enter.

For detailed information, please refer to the device’s User’s Guide for WLM-12NB1.

(Sample Illustration) Connecting to a wireless router

Connecting your player to a wireless access point or router - for BDX3300KC model

Your Blu-ray Disc™/DVD player has an integrated Wi-Fi^®device and antenna. No physical

connection to the wireless router is necessary.

Configure your player to access the wireless access point or router.

The network configuration and connection method may vary depending on the equipment in

use and the network environment. Your Blu-ray Disc™/DVD player is equipped with an

IEEE 802.11n wireless module, which also supports the 802.11 a/b/g/n standards. For the best

wireless performance, we recommend using an IEEE 802.11n certified Wi-Fi^®network

(access point or wireless router).

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™/DVD player connections

(Sample Illustration) Connecting to a wireless router

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for

stable operation of the wireless network.)

Wireless LAN, in its nature, may cause interference, depending on the use condition (AP

performance, distance, obstacle, interference by other radio devices, etc.).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is

supported.

1. Authentication Mode: WPAPSK, WPA2PSK

2. Encryption Type: WEP, TKIP, AES

Connecting a USB flash drive

A USB flash drive provides additional capacity for software upgrades. You can also enjoy

playing AVCHD™/MP3/WMA/JPEG and movie files you have stored on the USB flash drive.

Insert a USB flash drive into the USB port on the front of Blu-ray Disc™/DVD player.

(Sample Illustration) Connecting a flash drive

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

Connect only a USB flash drive to the USB port on this product.

If you cannot easily insert the USB flash drive, you may have inserted it incorrectly. Try to

turnover the device and then insert again.

Do not remove the USB flash drive during playback.

BD-Live™: Access to BD-Live™ requires use of USB flash drive (not included) installed in

the USB port. For additional information regarding the access to BD-Live™, see page 37 of

the manual.

TOSHIBA does not guarantee 100% compatibility with all USB flash drives.

If you want to enjoy BD-Live™ bonus content, you should connect a USB flash drive to the

USB port, and an Ethernet cable to the Ethernet jack on the back of your player and to an

Ethernet jack on a hub or broadband router.

Blu-ray Disc™ playback

Before you start disc playback, read the following information.

Cinavia Notice

This product uses Cinavia technology to limit the use of unauthorized copies of some

commercially-produced film and videos and their soundtracks. When a prohibited use of an

unauthorized copy is detected, a message will be displayed and playback or copying will be

interrupted.

More information about Cinavia technology is provided at the Cinavia Online Consumer

Information Center at http://www.cinavia.com. To request additional information about

Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer

Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.

Disc and file playback

This player is compatible with the following discs/files.

To play back a disc/file, make sure that it meets the requirements for region codes and color

systems as described below. You can play discs that have the following logos.

Other disc types are not guaranteed to play back.

Logos:

Playable discs:

Blu-ray Disc™

BD-ROM (single/dual layer)

BD-RE (single/dual layer)

(Recorded in BDMV format)

BD-R (single/dual layer)

(Recorded in BDMV format)

(Unclosed discs may not be played back.)

DVD-ROM

DVD-RW

DVD-R

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

Logos:

Playable discs:

CD-DA (audio CD)

CD-RW

CD-R

DTS^®-CD

Playable files:

Media:

AVCHD™

DVD-RW/-R

MP3

BD-R/BD-RE, DVD-RW/-R, CD-RW/-R

Windows Media™ Audio

JPEG

MPG

AVI

This player cannot play back disc content that is protected by Windows Media™ Digital Rights

Management (DRM).

Un-playable discs and files

The following disc types will not play back in this player.

❖

CD-ROM

CD-I (compact disc-interactive)

DVD-RAM

VSD (video single disc)

DVD-audio

HD DVD

VIDEO CD

Un-finalized disc

Blu-ray Disc™/DVD containing DivX^®files

Blu-ray Disc™/DVD hybrid disc (played back as a BD-video only)

Blu-ray Disc™ that contains AVCHD™ files

DVD-RW/-R recorded in non compatible recording format

Super Audio CD. Only the sound on the CD layer can be heard. The sound on the high-

density Super Audio CD layer cannot be heard.

Playability of dual discs are not guaranteed

Multi session disc

❖

Multi border disc

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

Region codes

This player has been designed to play back BD-video with region “A” and DVD-video with

region “1” or “ALL.” You cannot play back BD-video or DVD-video that are labeled for other

regions. Look for the symbols on your BD-video or DVD-video.

If these region symbols do not appear on your BD-video or DVD-video, you cannot play back

the disc in this player. The letter or number inside the globe refers to region of the world. A

BD-video or DVD-video labeled for a specific region can only be played back in the player with

the same region code.

Blu-ray™ Video

DVD-video

(Sample Illustration) Region Codes

Color system

BD-video and DVD-video are recorded in different color systems throughout the world. The

most common color system is NTSC (which is used primarily in the United States and Canada).

Disc contents structure

The contents of Blu-ray Disc™/DVD/AVCHD™ are generally divided into titles. Titles may be

further subdivided into chapters.

Blu-ray Disc™/DVD/AVCHD™

Title 1

Chapter 1 Chapter 2

Title 2

Chapter 1 Chapter 2

Chapter 3

(Sample Illustration) Sample structure of disc contents - chapters and titles

An audio CD is divided into tracks.

Audio CD

Track 3

Track 1

Track 2

Track 4

Track 5

(Sample Illustration) Audio CD track structure

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

Data discs or USB flash drives containing MP3/WMA/JPEG are divided into folders, and the

folders are subdivided into files.

MP3/WMA/JPEG

Folder (group) 1

File 1 File 2

Folder (group) 2

File 3

File 4

File 5

(Sample Illustration) Data disc/USB file structure

Basic playback

When you wish to view a disc, turn the TV On and select the video input connected to the

Blu-ray Disc™/DVD player.

Press the POWER ( ) button.

The Blu-ray Disc™/DVD player turns on.

Press the OPEN/CLOSE ( ) button.

The disc tray opens.

(Sample Illustration) Placing the disc on the disc tray

Place the disc on the disc tray with the playback side facing down.

Keep your fingers clear of the disc tray as it is closing. Neglecting to do so may cause serious

personal injury.

Press the OPEN/CLOSE ( ) button to close the disc tray.

Playback begins.

If you insert a Blu-ray Disc™ or a DVD that contains a top menu, a menu may appear. Press

the (

) arrow buttons to select the title you wish to view, then press the OK

button to begin playback.

You may need to press the TOP MENU or POP UP/MENU button to display the pop up

menu / top menu / disc menu (depending on the actual Blu-ray disc™ or DVD.)

Press the PLAY ( ) button to begin playback in stop mode.

Press the PAUSE ( ) button during playback to pause playback in still mode.

Press the PLAY ( ) button to resume normal playback.

The sound is muted during still mode.

Press the STOP ( ) button once to stop playback.

❖

Blu-ray™ discs: The home menu appears.

Press the PLAY ( ) button to begin playback again or press the (

) arrow buttons to

select BD-ROM, and then press the OK button to begin playback at the beginning of the

disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

❖

DVDs/audio CDs: It will enter the stop mode.

Press the PLAY ( ) button to resume normal playback. Depending on the disc type,

playback begins where it stopped or at the beginning of the disc.

During DVD/audio CD playback, if you press the STOP ( ) button twice, playback stops

completely and the home menu appears. Press the PLAY ( ) button to begin playback again

or press the (

) arrow buttons to select DVD-ROM/CD, and then press the OK button to

begin playback at the beginning of the disc.

10 Press the OPEN/CLOSE ( ) button to remove the disc.

11 Remove the disc after the disc tray opens completely.

12 Be sure to press the OPEN/CLOSE ( ) button to close the disc tray after you remove the

disc.

13 Press the POWER ( ) button to turn the player 0ff.

Automatic power off function

When you leave the unit in stop mode for more than 5 minutes, the screen saver is activated if

you set the Screen Saver to On mode. At the end of 25 minutes without any user interaction, the

unit automatically switches off.

Variable speed playback

You can play discs at various speeds, and resume playback from the location you stopped

playback.

Fast reverse/forward playback

Press the Fast reverse playback (

) buttons or the Fast forward playback (

) button

during playback.

Each time you press the button, the fast-forward or

fast-reverse speed progresses in the following sequence:

Press the PLAY ( ) button to resume normal playback.

The Blu-ray Disc™/DVD player mutes sound and subtitles during reverse and forward scan.

The playback speed may differ depending on the disc type.

Frame by frame playback

Press the STEP (

Each time you press this button, the picture advances one frame.

) button during still playback.

Press the PLAY ( ) button to resume normal playback.

The sound is muted during frame by frame playback.

Slow motion playback

Press the SLOW (

) button during playback.

Each time you press this button, the slow-motion speed progresses in the following sequence:

Press the PLAY ( ) button to resume normal playback.

The sound is muted during slow-motion playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

Locating a desired section

Normally, Blu-ray™ Discs and DVDs are divided into titles, and the titles are sub-divided into

chapters. Audio CDs are divided into tracks. You can quickly locate any specific title, chapter, or

track.

Locating a title using TOP MENU / POP UP / MENU

Press the TOP MENU / POP UP / MENU button.

The top / pop up menu appears on the TV screen.

Press the (

) arrow buttons to select the title you wish to select.

If the titles in the top menu are assigned a number, you can directly locate a specific title by

pressing its designated number with the number buttons on the remote control.

Press the OK button.

Playback begins from Chapter 1 of the selected title.

Locating a specific chapter or track

Press the SKIP Reverse (

) or SKIP Forward (

) button repeatedly to access the

chapter or track number you wish to select.

Playback starts from the selected chapter or track.

Press the SKIP Reverse (

chapter or track.

) button to start playback from the beginning of the current

When you press twice in quick succession, playback starts from the beginning of the

preceding chapter or track.

Press the SKIP Forward (

) button to locate succeeding chapters or tracks.

Some titles may not display chapter numbers.

Accessing a specific location directly

Locating a specific time in a DVD/Blu-ray Disc^TM

During playback, press the GOTO button and use the (

) arrow buttons to select TT

(Title) or CH (Chapter). Then press the OK button.

(Sample Illustration) Locating a specific time

Press the (

) arrow buttons to move the cursor to the Hour, Minute or Second.

❖

The first two numbers represent hours.

The second two numbers represent minutes.

The third two numbers represent seconds.

Press the (

) arrow buttons or the corresponding number buttons (0-9) for the time you

want, then press the OK button to confirm.

Playback starts from the selected time.

Locating a specific title in a DVD/Blu-ray Disc^TM

During playback, press the GOTO button and use the (

) arrow buttons to move the

cursor to TT (Title). Then press the OK button.

(Sample Illustration) Locating a specific title

Press the (

) arrow buttons or the corresponding number buttons (0-9) for the title you

want. Then press the OK button to confirm.

Playback starts from the selected title.

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

Locating a specific chapter in a DVD/Blu-ray Disc^TM

During playback, press GOTO button and use the (

) arrow buttons to move the cursor to

the chapter, then press the OK button.

(Sample Illustration) Locating a specific chapter

Press the (

) arrow buttons or the corresponding number buttons (0-9) for the chapter you

want. Then press the OK button to confirm.

Playback starts from the selected chapter.

Locating a specific time in a CD

During playback, press the GOTO button and use the (

) arrow buttons to select

TRACK or DISC. Then press the OK button.

(Sample Illustration) Locating a specific time—CD

Press the (

) arrow buttons to move the cursor to the Hour, Minute or Second.

❖

The first two numbers represent hours.

The second two numbers represent minutes.

The third two numbers represent seconds.

Press the (

) arrow buttons or the corresponding number buttons (0-9) for the time you

want. Then press the OK button to confirm.

Playback starts from the selected time.

Locating a specific track in a CD

During playback, press GOTO button and use the (

) arrow buttons to move the cursor to

TT (Track). Then press the OK button.

(Sample Illustration) Locating a specific track

Press the (

) arrow buttons or the corresponding number buttons (0-9) for the track you

want. Then press the OK button to confirm.

Playback starts from the selected track.

Repeating a title, chapter, track or specific segment

Repeating a title, chapter or track

Press the REPEAT button repeatedly to select the desired repeat mode during playback.

Repeat Title

Repeat Chapter

Repeat All

Repeat Single

Repeat All

(Sample Illustration) Selecting various repeat modes

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

The repeat setting will be cancelled when you stop playback.

The chapter, title or track repeat will be cleared when moving to another chapter, title,

track / file.

Chapter and title repeat are not available with some scenes.

Repeating a specific segment

Press the A-B button at the desired starting point A during playback.

Press the A-B button at the desired ending point B during playback.

The Blu-ray Disc™/DVD player automatically returns to point A and starts repeat playback

of the selected segment (A-B).

To resume normal playback press the A-B button and the A-B will disappear, meaning normal

playback has resumed.

Some discs may not permit A-B repeat operation.

You can specify a segment only within the current title or track.

You cannot set the A-B repeat function for a segment that includes multiple camera angles.

PIP setting

Some Blu-ray™ discs have the PIP function enabling you to display the secondary video in the

primary video. You can call up the secondary video by pressing the PIP button when the scene

contains the secondary video. See the documentation that came with the disc for playback

instructions.

Press the PIP button during playback to turn PIP mode On.

Press the 2nd. AUDIO button to turn the audio for the video in the PinP window On/Off.

Primary video

Secondary video

(Sample Illustration) PIP view function

Press the PIP button to turn PIP mode Off and resume normal playback.

Not all discs are available for PIP and 2nd Audio. It only applies to Blu-ray™ Discs that

support picture-in-picture features and 2nd Audio.

Camera angle

Some BD-video and DVD-video contain scenes that have been shot simultaneously from various

angles.

Press the ANGLE button during playback.

The selected angle is displayed on the display bar at the top of the TV screen.

Angle 1/3

(Sample Illustration) Selecting the desired angle

The first digit indicates the current viewing angle, and the second digit indicates the total

number of viewing angles.

Press the ANGLE button repeatedly to select the desired angle.

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

Audio selection

Press the AUDIO button during playback.

(Sample Illustration) Selecting the desired audio language

In the example “1/2 English DTS-HD^®MA 5.1 CH”:

❖

“1” indicates the currently selected audio channel

“2” indicates the total number of audio channels

“English” indicates the audio language

“DTS-HD^®MA 5.1 CH” describes the currently selected audio format

Press AUDIO repeatedly to select the desired audio language.

The available options of Audio playback vary from depending on the disc format.

Subtitle selection

During playback, press SUB.

(Sample Illustration) Selecting the desired subtitle setting

❖

“1” indicates the currently selected subtitle.

“2” indicates the total number of subtitles.

“English” indicates the subtitle language.

Press SUB repeatedly to select the desired subtitle language.

The current subtitle setting is displayed.

To turn off the subtitle setting display, press the SUB button repeatedly until

Off is displayed.

Playing in a favorite order

You can combine your favorite titles, chapters or tracks and play them in the order you

determine. You can program up to 15 selections into the memory (Memory playback).

During playback, press the PROGRAM button.

The following display appears.

(Sample Illustration) DVD Program display

(Sample Illustration) CD Program display

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

Press the OK button and the TT (Title) is highlighted. Then press the (

) arrow buttons or

the corresponding number buttons to enter the Title (TT) (for DVD movie) or Track number

(for audio CD).

Use the (

) arrow buttons to highlight the CH (Chapter) and also press the (

) arrow

buttons or the corresponding number buttons to enter the Chapter (for DVD movie).

(Sample Illustration) DVD title/chapter number display

(Sample Illustration) CD track number display

Press the PLAY button to start memory playback.

To resume normal playback from memory playback

Press the PROGRAM button.

Press the CLEAR button repeatedly until all entered programs are cleared.

Press the PLAY button to resume normal playback.

Some discs may not permit memory playback.

The programmed selections will be cleared when you open the disc tray or turn off the unit.

If you press the PROGRAM button while the display appears on the TV screen, the display

disappears.

Digest playback

During JPEG playback, press the DIGEST button.

A thumbnail view screen appears.

Press the SKIP Reverse (

thumbnail screen.

) or SKIP Forward (

) button to select the previous/next

Use the (

) arrow buttons to select an image you would like to playback in full

screen, and then press the OK button.

Zooming a picture

Press ZOOM during normal, slow or still playback.

The center part of the image will be zoomed in or out.

Each time you press the ZOOM button, the magnification/minification level changes as follows:

(Sample Illustration) Zoom levels

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

Press the (

) arrow buttons to view a different part of the image.

You may move the image from the center position to UP, DOWN, LEFT and RIGHT direction.

When you reach the edge of the image, the display will not shift anymore in that direction.

Some discs may not respond to zoom feature.

During some scenes, the buttons may not work as described.

Bookmark

During playback, press the BOOKMARK button to mark the desired scene.

The bookmark number, the current title and chapter, the elapsed time of the current title

appears on the screen. You can set up to 12 bookmarks on a DVD.

Press and hold the BOOKMARK button until the bookmark menu appears. Use the

(

) arrow buttons to select one option, and then press the OK button to play the

favorite bookmark.

To cancel the bookmark:

Press and hold the BOOKMARK button until the bookmark menu appears.

Press the Clear button repeatedly until all bookmarks are cleared.

Press the OK button to resume normal playback.

OSC (On Screen Control) operation

During playback, press the OSC button.

The OSC menu appears on the screen.

Press the (

) arrow buttons to select options, and press the PLAY ( ) or OK button. Use

the (

) arrow buttons to make adjustment and press OK.

When playing a BD:

Title: To select the title you want to locate.

Chapter: To select the chapter you want to locate.

Time: To display the elapsed time or remaining time of current

title / chapter.

Audio: To select the audio language.

Angle: To select the camera angle.

Subtitle: To select a subtitle language.

Subtitle Style: To select a subtitle style.

Second Video: To turn on/ off second video.

Second Audio: To turn on/ off second audio.

Bitrate: To select a bitrate.

Still Off: To pause or normal playback.

Instant Search: To fast forward playback.

Instant Replay: To fast reverse playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

When playing a DVD:

Title: To select the title you want to locate.

Chapter: To select the chapter you want to locate.

Time: To display the elapsed time or remaining time of current

title / chapter.

Mode: To select play mode.

Audio: To select the audio language.

Angle: To select the camera angle.

Subtitle: To select a subtitle language.

Bitrate: To select a bitrate.

Still Off: To pause or normal playback.

Instant Search: To fast forward playback.

Instant Replay: To fast reverse playback.

When playing a CD:

Track: To select the track you want to locate.

Time: To display the elapsed time or remaining time of disc or

current track.

Mode: To select play mode.

Bitrate: To select a bitrate.

Instant Search: To fast forward playback.

Instant Replay: To fast reverse playback.

Press the OSC button again to exit.

Displaying on-screen information

Press the DISPLAY button:

Your unit displays information about the Disc, such as type of disc, title number, chapter number,

elapsed time of the current title, audio format, subtitle language.

Press the DISPLAY button again to exit.

(Sample Illustration) BD-video

(Sample Illustration) DVD-video/AVCHD™

(Sample Illustration) CD

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Disc™ playback

(Sample Illustration) MP3/WMA

(Sample Illustration) JPG

Playing AVCHD™/MP3/WMA/JPEG files

You can play AVCHD™, MP3, WMA or JPEG files that have been recorded on a disc or a Media

Server on the Blu-ray Disc™/DVD player.

Playing files on a data disc

When inserting a data disc containing pictures, music, or video files into your player, icons are

added to the menu to indicate that video, music, or picture files are available for playback.

Press the OPEN/CLOSE ( ) button to open the disc tray, and load a disc that contains

video/MP3/JPEG files.

On the Home menu, press the (

then press the OK button.

) arrow buttons to select Video, Music, or Photo, and

The Media Center menu appears on the screen.

(Sample Illustration) Media Center menu

Press the (

playback.

) arrow buttons to select Data Disc and press OK.

) arrow buttons to select a file (or folder) and press OK or PLAY to start

Playing files on a Media Server

Set the Media Server Search to Enable.

In the Home menu, press the (

) arrow buttons to select Video, Music, or Photo, and

then press the OK button.

Press the (

) arrow buttons to select Media Server list, and then press OK.

) arrow buttons to select Video, Music or Photo, and press OK.

It should match the selection in the HOME menu. (If you selected Video in HOME menu,

you also should select Video here.)

Press the (

) arrow buttons to select a file (or folder), and press the OK or PLAY

button to start playback.

Make sure your player is properly connected to the network before using it. Furthermore, you

need at least one Media Server in the network to see and/or hear contents.

Do not remove the LAN connector during playback.

Not all media formats are supported.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the function settings

Using a USB flash drive

You can play AVCHD™, MP3, WMA or JPEG files that have been stored on USB flash drives

on the Blu-ray Disc™/DVD player.

Operating a USB flash drive

Insert a USB flash drive into the USB port of the Blu-ray Disc™/DVD player until it clicks.

In the Home menu, press the (

) arrow buttons to select Video, Music, or Photo, and

then press the ( ) arrow button or the OK button.

The Media Center menu appears on the screen

Press the (

) arrow buttons to select USB1, and press OK.

) arrow buttons to select a file (or folder), and press the OK or PLAY button

to start playback.

For additional operations, please follow the instructions in “Playing

AVCHD™/MP3/WMA/JPEG files” on page 31.

To remove the USB flash drive, gently pull the drive out of the player slowly, while in stop mode.

If you cannot easily insert the USB flash drive, you may have inserted it incorrectly. Try to

turnover the device and then insert again.

Do not remove the USB flash drive during playback.

Customizing the function settings

You can change the default settings to customize performance to your preference.

Performing Easy Setup

If it is the first time for the player to start up or users restore all settings to factory defaults, the

system will prompt you to perform Easy Setup.

Follow the on-screen instructions to customize the following settings to your preference:

❖

OSD Language: (English/French/Spanish)

Resolution: (Auto/480i/480p/720p/1080i/1080p)

TV Screen: (16:9 Full / 16:9 Normal / 4:3 Pan & Scan / 4:3 Letterbox)

After setting, press OK to confirm and exit.

General operations

Press the HOME button in stop mode to display the HOME menu. Then use the (

)

arrow buttons to select Setting.

Press the ( ) arrow button, and then the (

Press the OK button.

Press the ( ) arrow button or the RETURN button to return to the previous menu.

) arrow buttons to select the setting options.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the function settings

Submenu display area

Settings menu items

(Sample Illustration) General operations settings

Information

This menu displays the following information:

❖

Software version

MAC Address

Netflix^®ESN

In the main Settings menu, press the (

) arrow buttons to select Information to display

the software version, MAC Address and Netflix^®ESN.

Press the ( ) arrow button or the RETURN button to return to the previous menu.

Playback

In the main Settings menu, press the (

) arrow buttons to select Playback, and then press

the ( ) arrow button or the OK button to confirm.

Press the (

Use the (

) arrow buttons to select an option, and then press OK.

) arrow buttons to select On/Off, and then press OK.

Press the ( ) arrow button to go to the previous menu.

Angle Mark

To turn on/off the angle mark.

PIP Mark

To turn on/off the PIP mark.

Secondary Audio

To turn on/off secondary audio.

Last Memory

To turn on/off the last memory.

Display settings

In the main Settings menu, press the (

) arrow buttons to select Display, and then press

the ( ) arrow button or OK button to confirm.

Press the (

Use the (

) arrow buttons to select an option, and then press the OK button.

) arrow buttons to select the desired option, and then press the OK button to

confirm your selection.

Press the ( ) arrow button to return to the previous menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the function settings

TV Screen

16:9 Full, 16:9 Normal, 4:3 Pan & Scan and 4:3 Letterbox are available for your choice.

Resolution

You can define the video output resolution in this option.

Resolution:

Auto

TV Type:

If your TV is a high-definition TV(HDTV) connected to the HDMI jack on your

player and you want your player to set the output resolution based on information

exchanged between the TV and your player over the HDMI cable.

480i

If your TV is a standard-definition TV (SDTV) capable of 480i only.

If your TV is an enhanced-definition TV (EDTV) capable of 480p only.

If your TV is a high-definition TV (HDTV) capable of 720p only.

If your TV is a high-definition TV (HDTV) capable of 1080i only.

If the TV is a high-definition TV (HDTV) capable of 1080p (any frame rate)

480p

720p

1080i

1080p

connected to the HDMI jack on your player.

Selecting a resolution the TV does not support could result in an unstable picture or loss of

the picture. See the documentation that came with the TV to find the resolutions the TV

supports.

Only the HDMI output on your player supports 1080p video output at any frame rate.

Color Space

To select the RGB, YCbCr, YCbCr422, or Full RGB to match your TV for perfect display effect.

HDMI^®Deep color

This option decides whether to turn off the Deep Color (color depth) setting for video signals

output from the HDMI OUT jack.

Connecting the player and a TV that supports HDMI^®Deep Color allows more accurate color

reproduction than when connecting it to a TV that does not support HDMI^®Deep Color. It is

recommended to set this option Off if the picture is unstable or colors appear unnatural.

HDMI^®1080/24p

Movies are recorded on film at a rate of 24 pictures (frames) per second. Many of the movies on

Blu-ray™ discs are placed on the discs at this frame rate. However, not all TVs can display 24

progressive frames/second of video. If the TV cannot display this frame rate, you need to turn off

HDMI^®1080/24p.

Video Adjust

Brightness: Adjust the brightness of the picture.

Contrast: Adjust the contrast of the picture. The black portions of the picture become richer in

darkness and the white become brighter.

Hue: Adjust the hue of the picture.

Saturation: Adjust the amount of color in the picture.

Sharpness

Adjust the sharpness levels (Low, Middle or High) to improve detail in the picture.

Audio setting

The settings in the Audio menu will configure the Blu-ray Disc™/DVD player’s digital audio

outputs (HDMI^®or Coaxial).

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the function settings

In the main Settings menu, press the (

OK button.

) arrow buttons to select Audio, and then press the

Press the (

Use the (

) arrow buttons to select an option, and then press the OK button.

) arrow buttons to select the desired audio setting, and then press the OK

button to confirm.

Press the ( ) arrow button to return to the previous menu.

SPDIF

When you connect an audio system to the COAXIAL DIGITAL output jack (see “Connecting to

a digital amplifier/AV receiver” on page 15) the options are:

❖

Bitstream: Selects Bitstream output if your receiver SPDIF (Coax) IN supports Dolby^®or

DTS^®or PCM audio signal.

PCM: Selects PCM output if your receiver SPDIF (Coax) IN only supports PCM stereo

audio signal.

Re-encode: Selects Re-encode output if your receiver SPDIF (Coax) IN supports Dolby^®

or DTS^®and you want to hear both PIP audio and the movie audio on Blu-ray™ video.

Off: No audio will be output via COAXIAL DIGITAL output jack.

HDMI^®

When you connect an HDMI^®device to the HDMI OUT jack (see “Connecting to a digital

amplifier/AV receiver” on page 15). The available options are:

❖

Bitstream: Selects Bitstream output if your receiver HDMI IN supports Dolby^®or DTS^®or

PCM audio signal.

PCM: Selects PCM output if your receiver HDMI IN only supports PCM audio signal.

Re-encode: Selects Re-encode if your receiver's HDMI IN supports Dolby^®or DTS^®and

you want to hear both PIP audio and movie audio on Blu-ray™ video.

Off: No audio will be output via HDMI OUT jack.

❖

Down-Samp

If you don’t have a surround sound receiver connected to the Blu-ray Disc™/DVD player, you

should leave the PCM downsampling to 48 kHz, and proceed to the next setup menu item.

If you have a surround sound receiver connected to the Blu-ray Disc™/DVD player, and you

have connected to the surround receiver via the Blu-ray Disc™/DVD player’s HDMI^®output,

this setting has no effect on the audio going to the HDMI^®output of the player. Leave the PCM

downsampling to 48 kHz, and proceed to the next setup menu item.

Incorrectly setting the digital audio output’s Down-Sample rate too high may result in

unpredictable audio playback.

Dolby^®DRC (Dynamic Range Control)

Dynamic Range Control means that you can allow the Blu-ray Disc™/DVD player to make the

loud parts of a movie’s audio track quieter than they would be in the theatre, without making the

dialog of the actors any quieter.

This would be useful, for instance, when you want to watch a movie in the evening when others

might be sleeping.

When Dynamic Range Control is set to Off, movie soundtracks are played with the standard

dynamic range. When movie soundtracks are played at low volume or from smaller speakers,

you can set Dynamic Range Control to On. Your player applies appropriate compression to make

low-level content more intelligible and prevent dramatic passages from getting too loud.

Selecting the “Auto” option turns on the Dynamic Range Control for all Blu-ray Disc™ movie

soundtracks except Dolby^®TrueHD. If you have selected a Dolby^®TrueHD track on the Blu-ray

Disc™, the “auto” selection tells the Blu-ray Disc™/DVD player to only turn on dynamic range

control if information embedded in the Dolby^®TrueHD sound track tells it to do so.

Stereo Down Mix

Select whether to downmix the multi-channel audio into fewer channels.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the function settings

❖

Stereo—Downmixes the multi-channel audio into two channel stereo. Choose when the

Blu-ray Disc™/DVD player is connected to equipment that does not support virtual

surround function such as Dolby^®Pro Logic.

Surround Encoded (LtRt)—Downmixes the multichannel audio into surround compatible

stereo. Choose when the Blu-ray Disc™/DVD player is connected to equipment that

supports virtual surround function such as Dolby^®Pro Logic.

❖

System setting

In the main Settings menu, press the ( ) arrow button, then use the (

) arrow buttons to

select System, and then press the OK button.

Press the (

Use the (

confirm.

) arrow buttons to select an option, and then press the OK button.

) arrow buttons to select the desired setting, and then press the OK button to

Press the ( ) arrow button to return to the previous menu.

Screen saver

This Blu-ray Disc™/DVD player has a screen saver feature for when your player is inactive. You

can set it to On or Off.

If you set the Screen Saver to On mode, the screen saver of the unit automatically appears when

you leave the unit in stop mode for more than 5 minutes.

Disc auto play

If On is selected, a Blu-ray Disc™ will load data and play back automatically when you insert it.

If Off is selected, when you insert a Blu-ray Disc™, it will be displayed on the Settings menu.

CEC

This option is used to allow the TV remote control to control certain functions of the Blu-ray

Disc™/DVD player, and the Blu-ray Disc™/DVD player to control certain functions of the TV.

❖

On: Allow mutual control of devices through HDMI^®.

Off: Do not allow CEC control.

Not all TVs are compatible with your Blu-ray Disc™/DVD player.

The default setting is Off. Select On if CEC control is necessary.

Load Default:

Press the OK button to pop up a dialog box, choose OK in the box, and then press OK to

confirm.

To apply the deactivation, please unplug the player after operating deactivation.

Deactivate Setting

Action:

Response:

Deactivate all connected applications

Deactivates all connected applications

Deactivate Netflix

Deactivates the connected Netflix application

Deactivate YouTube

Deactivates the connected YouTube application

Deactivate CinemaNow

Deactivates the connected CinemaNow application

Deactivate Picasa™

Deactivates the connected Picasa™ application

Upgrade

This option allows to update your product software via a Disc, USB storage or Network.

External Memory

BUDA Information: To display the external memory information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the function settings

Network connection setting

In the main Settings menu, press the (

) arrow buttons to select Network, and then press

the OK button.

Press the (

) arrow buttons to select an option, and then press the OK button.

Press the ( ) arrow button to go to the previous menu.

Internet Connection

To enable/disable the Internet connection.

Interface

To select the Ethernet or Wireless.

Connection Test

Selecting the Connection Test will cause the player to attempt to communicate with your home

network, and if successful, with a known Internet address. If both attempts are successful, your

network connection should be good. If the player can successfully connect to your home

network, but not to the known Internet address, your Internet service may be “down”, or your

security firewall may be blocking access of the player to the Internet.

IP Setting

To select Auto or Manual to set IP.

For step by step instruction, see “Connecting to a network” on page 16.

BD-Live™ Connection

❖

Permitted - Always allows BD-Live™ network access.

Partial Permitted - Allows Internet access with valid BD-Live™ network access approval.

Prohibited - Never allows BD-Live™ Internet access.

Some (but not all) Blu-ray™ Discs contain additional features that are made available to players

that are connected to the Internet, and have additional memory added. These additional features

may include things like:

❖

the ability to download new movie trailers

additional ‘commentary’ by actors and directors

multi-person game play and chat

In order to access BD-Live™ functions, the player must be properly configured for BD-Live™

Internet access, and it must be equipped with additional memory.

BD-Live™ requires connection of a USB flash drive of at least 1 GB (sold separately) to USB

port. For models without built-in Wi-Fi^®, BD-Live™ is only supported via Ethernet so when

using single USB port for Internet access, BD-Live™ will not be available. Performance of

interactive features may vary due to disc design or content, and may also require an always-

on broadband Internet connection. Firmware update may be required for some interactive

features. Some features may require additional bandwidth. Some features may not be

available in all geographic locations and are subject to third party compatibility.

Depending on your connection environment, it may take time to connect to the Internet or the

Internet may not be connected.

When BD-Live™ functions are used and the unit is connected to the Internet, you may be

charged for this communication.

Do not remove the USB flash drive when using the BD-Live™ function.

Information

To display the Network Information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Security

External control setting

To set the Device Name, User Name, Password or Port Number.

Media Sever Search

Media Sever Search function enables you to create an interoperability network with other devices

for resource sharing based on a network.

Language settings

In the main Settings menu, press the (

) arrow buttons to select Language, and then

press the OK button.

Press the (

OK button.

) arrow buttons to select OSD, Menu, Audio, or Subtitle, and then press the

Use the (

to confirm.

) arrow buttons to select the preferred language, and then press the OK button

Press the ( ) arrow button to return to the previous menu.

OSD

This option enables you to select the on-screen menu language.

This option lets you to select the disc menu language.

Not all languages are available on all discs.

Most discs only have one menu language.

Audio

From this option, you can choose the audio language of your preference.

Not all languages are available on all discs.

Some discs do not let you select the audio language using your player’s menu. Instead, you

have to select the audio language from the disc setup menu (the menu that appears after you

insert the disc).

Subtiltle

You can customize your preferred subtitle language in this option.

Not all languages are available on all discs.

Some discs do not let you select the subtitle language using your player’s menu. Instead, you

have to select the subtitle language from the disc setup menu (the menu that appears after

you insert the disc).

You can also select the subtitle language from the subtitle menu in the on-screen menu.

Security

In the main Settings menu, press the (

) arrow buttons to select Security, and then press

the OK button.

Press the (

then press the OK button.

) arrow buttons to select Password, Country Code or Parental Control, and

Enter your password by pressing number buttons. The default password is 0000.

Press the ( ) arrow button to return to the previous menu.

Password

A new password can be set to replace the default password.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the connected applications

Enter the current password (a 4-digit number).

The New password screen appears.

Enter a 4-digit number for the new password, and then enter it again to confirm.

If you forget the password, you can erase your current password by pressing number button 0 on

the remote control four times, then press OK button to confirm the setting. PASSWORD: 0000

Country Code

Enter the password (a 4-digit number) for selecting the country code (United States or Canada).

Parental control

Enter a 4-digit number for the parental control.

Press the (

) arrow buttons to select the rating level you want to block, and then press

OK.

The selected rating and all higher ratings will be blocked. You can select:

❖

Off

1 [Kid Safe] — Suitable for all children.

2 [G] — General audiences.

3 [PG] — Parental guidance suggested.

4 [PG-13] — Not suitable for anyone under 13.

5 [PG-R] — Parental guidance recommended.

6 [R] — Not suitable for anyone under 17 unless supervised by a parent or adult

guardian.

7 [NC-17] — Not suitable for anyone under 17.

8 [Adult] — All Blu-ray™ Discs and DVDs can be played.

❖

Press the ( ) arrow button to go to the previous menu.

Using the connected applications

Watching movies with CinemaNow^®

This Blu-ray Disc™/DVD player enables you to use the following services provided by

CinemaNow^®.

In the Home menu, press the (

Press the ( ) arrow button, and then press the (

Use the ( ) arrow buttons to select CinemaNow, and then press the OK button

to enter the CinemaNow^®main menu.

) arrow buttons to select Connected.

) arrow buttons to select Video.

❖

Movies:Display movies

TV Shows:Display TV Shows.

Find:Search for a desired movie or TV show by entering it manually.

My Library:Display a title that you bought or rented.

My Favorites : Display a title that has been added to My Favorites.

Configure : Activate or deactivate the Blu-ray Disc™ Player.

Help : Get customer service contact information and check the current software version.

If you don’t have a CinemaNow^®account yet, visit www.cinemanow.com/bbactivate to

create your account.

Use the (

Press the Activate.

) to select the Settings, then press OK.

Use the number buttons on the remote control to enter the activation code that is created by

the web site, then use ( ) to highlight Activate, and press OK to confirm.

When the Blu-ray Disc™ Player is activated, you will move to the Home page.

Press the (

) to select the Movies or TV Shows, then press OK.

) to select the desired title, then press OK.

) to select the Rent or Buy, then press OK.

10 Press the (

11 Press the (

) to select the Submit Order, then press OK. If you want to play any of the

titles that your bought, simply click Play Now.

12 Press the ( ) to go to the previous menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the connected applications

Watching movies with Netflix^®

To use Netflix^®service, connect this player to your network, and create the network settings if

they are not yet finished.

Launching Netflix^®movie

In the Home menu, press the (

) arrow buttons to select Connected.

) arrow buttons to select Video.

) arrow buttons to select Netflix, and then press the OK button to enter

Press the ( ) arrow button, and then press the (

Use the (

the Netflix^®menu.

Creating Netflix^®account

If you are not a Netflix^®member:

Select no. Read the instructions displayed on the TV screen, and visit

http://www.netflix.com/toshiba from your PC. Sign up to create your account, then select “I’m

now a member”.

(Sample Illustration) Netflix^®member - no

If you are a Netflix^®member, select yes.

Enter a valid email address and password.

Preparing Instant Queue

To play streaming video via Netflix^®service, Netflix^®player needs to be activated. Read the

instructions displayed on the TV screen. Sign in to your Netflix^®account with your email address

and password. Now you can view Netflix^®streaming video. After having activated Netflix^®

player and prepared Instant Queue, movies and TV episodes in your Instant Queue appear on the

TV screen. Select your desired one using the remote control of the player. You can control

Netflix^®streaming video with the following keys of the remote control of this player:

Logos:

Playable discs:

Starts playing movie.

Pauses playback while in PLAY mode.

Stops playing and return to a list of movie titles.

Pauses movie playback.

Starts playing while in PAUSE mode.

Pauses playing and opens a list of scenes.

Pressing further proceeds to the next scene.

Pauses playing and opens a list of scenes.

Pressing further proceeds to the previous scene.

Stops playing and returns to a list of movie titles.

Pauses playing and opens a list of scenes.

Fast forward play starts.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the connected applications

Logos:

Playable discs:

Pauses playing and opens a list of scenes.

Fast reverse play starts.

HOME Menu

Stops playing and returns to the Home Menu.

Pauses playing of Track play screen while in PLAY mode.

Starts playing the movie in case of during Track play screen.

Resolution of video streamed from Netflix varies depending on communication speed or

bitrate of each content, etc.

Watching movies with YouTube^®

In the Home menu, press the (

Press the ( ) arrow button, and then press the (

) arrow buttons to select Connected.

) arrow buttons to select Video.

) arrow buttons to select YouTube, and then press the OK button to

Use the (

confirm.

Please enjoy any contents.

Browsing photos with Picasa™

Signing in with your account

To display photos in your web album on the screen, you need to sign in with your Picasa™

account.

In the Home menu, press the (

Press the ( ) arrow button, and then press the (

Press the ( ) arrow button to select Picasa, and then press the OK button to confirm.

Enter your user name using the virtual keyboard, and press the OK button while [OK] is

selected on the screen.

) arrow buttons to select Connected.

) arrow buttons to select Photo.

Enter the password using the virtual keyboard, and press the OK button while [OK] is

selected on the screen.

Your web album is displayed on the screen.

Creating a new Picasa™ account on your PC

Visit http://picasa.google.com/ to create a new account.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting & Maintenance

Problem:

No power

Solution:

Check if the AC cord is properly connected.

Unplug the AC cord once, and wait for approximately 5-10 seconds and

then plug it in again.

No sound or picture

Distorted picture

Check if the connected TV is turned on.

Check if the connections are made securely and correctly.

Check whether the connected TV or other device supports HDCP. (This

unit will not output a video signal unless the other device supports

HDCP.)

Check whether the output format of this unit (HDMI FORMAT) matches

the supported input format of other connected device.

Sometimes a small amount of picture distortion may appear. This is not

a malfunction.

Connect this unit directly to the TV.

Completely distorted picture or black Make sure the disc is compatible with this unit.

/white picture with Blu-ray

Disc™/DVD

No sound or distorted sound

Adjust the volume.

Check if speakers are connected correctly.

Check the HDMI connections.

Check the settings in the Audio menu.

Picture freezes momentarily during Check the disc for fingerprints/scratches and clean with a soft cloth

playback

wiping from center to edge.

Clean the disc.

Disc cannot be played back

Clean the disc.

Ensure the disc label is facing up.

Check if the disc is defective by trying another disc.

Cancel the ratings control or change the control level.

Insert a correct disc that can be played back on this unit.

No return to start-up screen when

disc is removed

Reset this unit by turning it off, then on again.

The unit does not respond to the

remote control

Aim the remote control directly at infrared sensor window on the front

panel.

Reduce the distance to infrared sensor window.

Replace the batteries in the remote control.

Re-insert the batteries with their polarities (+ / - signs) as indicated.

Buttons do not work or the unit stops To completely reset the unit, unplug the AC cord from the AC outlet for

responding approximately 5-10 seconds.

The unit does not respond to some Operations may not be permitted by the disc.

operating commands during

playback

Refer to the instructions of the disc.

The unit cannot read Blu-ray

Disc™/DVD/CD

Dew condensation may form inside the unit. Do not use this unit for at

least a few hours until its inside gets dry.

Wipe the dirt off the disc or replace the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting & Maintenance

Problem:

Solution:

Angle does not switch

The angle cannot be switched for Blu-ray Disc™/DVD which do not

contain multiple angles.

In some cases multiple angles are only recorded for specific scenes.

Playback does not start when the title Check the settings in the Parental menu.

is selected

The password for rating level has

been forgotten

If you forget your password, you need to go to the Security setup menu

to reset and input a new password. For more information, see “Security”

on page 38).

Cannot connect to the network

Check that the LAN cable connection is properly made.

Turn on the modem or broadband router.

Check that the broadband router and/or modem is correctly connected.

Check the Network Connection Setting.

Cannot connect to the network while Check the content of your Internet service contract to see if your Internet

my PC is connected to the network service provider prevents multiple terminals connecting at the same

time.

Cannot use the BD-Live™ function Use a USB flash drive with enough space.

Some functions are not available in specific modes, but this is not a malfunction. Read the

description in this manual for details on correct operations.

Some functions are prohibited on some discs.

Maintenance

Servicing

Please refer to relevant topics in “Troubleshooting & Maintenance” on page 41 before returning

the product.

If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-

serviceable parts inside. Turn off, unplug the power plug, and please call our helpline to locate an

Authorized Service Center.

Cleaning the cabinet

Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid

near the unit. Such chemicals may discolor the surface or damage the unit.

Cleaning discs

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out.

Do not wipe in a circular motion.

Do not use solvents such as benzine, thinner, commercially available cleaners, detergent,

abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

If this unit still does not perform properly although you refer to the relevant sections and to

“Troubleshooting” in this manual, the laser optical pickup unit may be dirty. Consult your dealer

or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Disc handling

Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

Always store the disc in its protective case when it is not used.

Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played

back on this unit. Do not attempt to playback such discs, as they may damage the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

IR signal check

If the remote control is not working properly, you can use a digital camera (including a cellular

phone with built-in camera) to see if it is sending out an infrared signal.

Glossary

Analog Audio

An electrical signal that directly represents sound. Compare this to digital audio which can be an

electrical signal, but is an indirect representation of sound.

Aspect Ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV

screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as it

is high).

AVCHD™

AVCHD™ is a new format for high definition video camcorders which can record and play

high-resolution HD images.

BD-Java™

With some Blu-ray Disc™ which support Java™ applications, you can enjoy the interactive

functions such as games or interactive menus.

BD-Live™

BD-Live™ is a BD-video (BD-ROM version 2 Profile 2.0/Profile 1.1) which contains new

functions (e.g. Internet connection), in addition to the BONUSVIEW™ function.

Blu-ray Disc™ (BD)

Blu-ray Disc™ is a next generation optical video disc which is capable of storing much more

data than a conventional DVD is. The large capacity makes it possible to benefit from the

features such as high-definition videos, multichannel surround sounds, interactive menus and so

on.

Chapter

Just as a book is split up into several chapters, a title on a BD-video or DVD-video is usually

divided into chapters.

Component Video Output

Each signal of luminance (Y) and component (PB/CB, PR/CR) is independent to output so that

you can experience picture Color as it is. Also, due to compatibility with progressive video

(525p/480p), you can experience higher-density picture than that in interlace (525i/480i).

Digital Audio

An indirect representation of sound by numbers. During recording, the sound is measured at

discrete intervals (44,100 times a second for CD audio) by an analog-to-digital converter,

generating a stream of numbers. On playback, a digital-to-analog converter generates an analog

signal based on these numbers.

DNS Server

A server which translates Internet domain names into IP addresses.

Dolby^®Digital

The system to compress digital sound developed by Dolby^®Laboratories. It offers you sound of

stereo (2ch) or multi-channel audio.

Dolby^®Digital Plus

Dolby^®Digital Plus is the next generation digital audio compression technology developed as an

extension to Dolby^®Digital. Blu-ray Disc™ supports 7.1 multi-channel surround sound output.

Dolby^®TrueHD

Dolby^®TrueHD is a lossless coding technology developed for next generation optical discs.

Blu-ray Disc™ supports 7.1 multi-channel surround sound output.

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

DTS^®

DTS^®is a multi-channel surround sound system. By connecting to DTS^®decoder, you can enjoy

movie dynamic and realistic sound like movie theater. DTS^®surround sound technologies were

developed by DTS^®, Inc.

DTS-HD^®

DTS-HD^®is a lossless coding technology developed as an extension of the original DTS^®

Coherent Acoustics format. Blu-ray Disc™ supports 7.1 multi-channel surround sound output.

Gateway

IP Address of the electronic devices (such as router) which provide Internet access.

HDMI^®(High-Definition Multimedia Interface)

A digital interface between audio and video source. It can transmit component video, audio, and

control signal with one cable connection.

Hub

A device used for connecting multiple devices to the network.

IP Address

A set of numbers which are assigned to devices participating in a computer network.

JPEG (Joint Photographic Experts Group)

JPEG is a method of compressing still picture files. You can copy JPEG files on BD-RE/-R,

DVD-RW/-R or CDRW/-R from a computer and play back the files in this unit.

LAN (Local Area Network)

A group of computer networks covering a small area like a company, school or home.

Local Storage

A storage area of sub contents for playing virtual packages on

BD-video.

MP3 (MPEG audio layer 3)

MP3 is a method of compressing files. You can copy MP3 files on BD-RE/-R, DVD-RW/-R or

CD-RW/-R from the computer and play back the files on this unit.

PCM (Pulse Code Modulation)

The most common system of encoding digital audio, found on CD and DAT. Excellent quality

that requires a lot of data compared to formats such as Dolby^®Digital and MPEG audio. For

compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital

inputs, this unit can convert Dolby^®Digital, DTS^®, and MPEG audio to PCM.

Proxy Server

Proxy server is a server which acts as an intermediary between a workstation user and the

Internet to ensure security.

Region Code

Regions associate discs and players with particular areas of the world. This unit will only play

back discs that have compatible region codes. You can find the region code of your unit by

looking on the rear panel. Some discs are compatible with more than one region (or all regions).

Router

A networking device which distinguishes the IP address assigned to each device and routing and

forwarding information in the computer network.

Sampling Frequency

The rate which sound is measured by a specified interval to turn into digital audio data. The

numbers of sampling in one second defines as sampling frequency. The higher the rate, the better

the sound quality.

Subnet Mask

A mask which is used to determine what subnet an IP address belongs to.

Title

A collection of chapters on BD-video or DVD-video.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Track

Audio CD use tracks to divide up the content of a disc. The

BD-video or DVD-video equivalent is called a chapter. See also “Chapter”.

Virtual Package

The function which copies data to other media (local storage) from the Internet and play the

secondary video, secondary audio and the subtitle at the same time. The method of the playback

varies depending on discs.

Windows Media™ Audio

Windows Media™ Audio is the audio compressing technology developed by Microsoft^®. You

can copy Windows Media™ Audio files on BD-RE/-R, DVD-RW/-R or CD-RW/-R from a

computer and play them back on this unit.

x.v.Color^®

“x.v.Color^®” is a promotion name given to the products that have the capability to realize a wide

color space based on the xvYCC specifications and is a trademark of Sony Corporation.

Specifications

General:

Signal system

NTSC color

120V AC, 60Hz

12W

Power requirements

Power consumption

Dimensions

(width x height x depth)

360 x 36 x 186mm

Weight

1.0 kg

Operating temperature

Operating humidity

41°F (5°C) to 95°F (35°C)

Less than 80% (no condensation)

Video: 480i, 480p, 720p 1080i, 1080p, 1080p/24F / Audio

HDMI^®output

HDMI^®jack x 1

Audio output (Coaxial digital)

RCA jack x 1

0.5Vp-p (75Ω)

USB terminal x 1

LAN terminal

500mA

---

100BASE-T

The specifications and design of this product are subject to change without notice.

Disclaimer

1080p capable display required for viewing in 1080p. Viewing HD content and up-converting

DVD content may require an HDCP capable input on your display device. While up-converting

DVD video content may result in a picture that appears to be near HD quality, results may vary

depending on content, display and settings. Feature performance may vary and may also require

an always-on broadband Internet connection. Firmware update and additional bandwidth may be

required. BD-Live™ requires connection of a USB flash drive of at least 1 GB (sold separately)

to USB port. Performance of interactive features may vary due to disc design or content, and may

also require an always-on broadband Internet connection. Firmware update may be required for

some interactive features. Some features may require additional bandwidth. Third party Internet

services are not provided by Toshiba, may change or be discontinued at any time and may be

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

subject to third party restrictions. Toshiba makes no representations or warranties about these

services, which may require the creation of a user account through a computer with Internet

access. Third party Internet service users may incur one-time and/or recurring charges. For

Dolby^®TrueHD and DTS-HD^®Master Audio | Essential™ playback, content encoded in Dolby^®

TrueHD and DTS-HD^®Master Audio | Essential™ format required. Viewing 1080p/24 fps

output requires 1080p/24 fps encoded content and an HD display capable of accepting a

1080p/24Hz signal. Supported file types: JPEG, MP3, WMA, and AVCHD. Some recordable

media, cards or files may not be supported. Product specifications, information and availability

are all subject to change without notice.

License Information

END USER LICENSE AGREEMENT

This End User License Agreement (“EULA”) is a legal agreement between you and Toshiba Corporation

(“Toshiba”) with regard to the copyrighted Software provided with this EULA. Use of any software and related

documentation (“Software”) provided with a Toshiba Blu-ray Disc™/DVD player, or made available by

downloading or otherwise to you by Toshiba in whatever form or media, will constitute your acceptance of

these terms, unless separate terms are provided by the software supplier or Toshiba in the documentation

accompanying the Toshiba Blu-ray Disc™/DVD player or otherwise, in which case certain additional or

different terms may apply. If you do not agree with the terms of this EULA, do not use, download, install or

copy the Software. If you wish to return a complete Blu-ray Disc™/DVD player system (hardware and

software), contact the retailer where you purchased the Blu-ray Disc™/DVD player, and comply with the

retailer’s standard return policies and procedures.

Article 1 Definition

The Software means all programs contained in the Toshiba Blu-ray Disc™/DVD player. The copyright of the

Software belongs to Toshiba and/or its suppliers, including BSQUARE Corporation and/or its suppliers. The

Software is protected by copyright laws, Universal Copyright Convention, and other laws and conventions

related to intellectual property rights. The content of the Software and manual is subject to change by Toshiba

without notice.

Article 2 License Grant and Use Conditions

Toshiba grants to you a personal, non-transferable and non-exclusive right to use the copy of the Software in

accordance with this EULA. You may permanently transfer all of your rights under this EULA, provided you

transfer complete Blu-ray Disc™/DVD player together with all of the Software, you retain no copies, and the

recipient agrees to the terms of this EULA. If the Software is an upgrade version, any transfer must include all

prior versions of the Software. For maintenance purposes, you may update the version of the Software only for

the Blu-ray Disc™/DVD player that is owned by you.

Article 3 Prohibited Uses

Unless otherwise expressly provided in this EULA or the product manual accompanying the Toshiba Blu-ray

Disc™/DVD player:

3.1. You may not copy the Software, in whole or in part, without express written permission by Toshiba and/or

its suppliers.

3.2. You may not assign, resell, distribute or sublicense the Software or a copy of the Software.

3.3. You may not create, assign, resell, or sublicense secondary works of the Software without permission.

3.4. You may not modify, analyze, reverse engineer, decompile or disassemble any part of the Software.

3.5. You may not combine or incorporate the Software with or into any other application.

3.6. You may not print the Software.

Article 4 Disclaimer

4.1. THE HARDWARE PRODUCT LIMITED WARRANTY IS SET FORTH IN THE DOCUMENTATION

ACCOMPANYING THE HARDWARE PRODUCT.

4.2. THE SOFTWARE IS PROVIDED “AS-IS” AND “ASAVAILABLE,” WITHOUT WARRANTIES OF

ANY KIND.

ALL WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, CONTRACTUAL OR STATUTORY,

INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

FITNESS FOR A PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT ARE HEREBY WAIVED

BY YOU AND DISCLAIMED BY TOSHIBA.THIS EULA REPRESENTS THE SOLE AND EXCLUSIVE

OBLIGATION OF TOSHIBA AND ITS SUPPLIERS WITH RESPECT TO THE SOFTWARE.

Article 5 Limitation of Liability

TO THE MAXIMUM EXTENT NOT PROHIBITED BY APPLICABLE LAW, IN NO EVENT SHALL

TOSHIBA AND/OR ITS SUPPLIERS BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL,

SPECIAL, INDIRECT, PUNITIVE OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING,

WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, LOSS OF DATA, BUSINESS

INTERRUPTION, OR ANY OTHER COMMERNCIAL DAMAGES OR LOSSES, ARISING OUT OF OR

RELATED TO YOUR USE OR INABILITY TO USE THE SOFTWARE, HOWEVER CAUSED,

REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT, OR OTHERWISE) AND EVEN

IF TOSHIBA AND/OR ITS SUPPLIERS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF LIABILITY FOR

PERSONAL INJURY, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES; THEREFORE, THE

ABOVE LIMITATIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES. THE

AGGREGATE LIABILITY OF TOSHIBA AND ITS SUPPLIERS IN CONNECTION WITH THE

SOFTWARE, REGARDLESS OF THE FORM OF ANY LEGAL ACTION OR PROCEEDING, SHALL BE

LIMITED TO DIRECT DAMAGES NOT TO EXCEED THE AMOUNT PAID FOR THE TOSHIBA BLU-

RAY PLAYER.

Article 6 Export Control

Any export, directly or indirectly, of the Software in contravention of the United States Export Administration

Regulations, or any other applicable law, regulation, or order, is prohibited.

Article 7 Termination of License

In the event that you fail to comply with any of the terms and conditions contained herein, Toshiba shall have

the right to immediately terminate this Agreement without any notification to you. Upon termination of this

Agreement, you shall cease all use of the Software and destroy all copies, in whole and/or in part.

Article 8 Governing Law

This EULA is governed by the laws of Japan, without references to the conflict of laws principles. Any and all

disputes arising hereunder shall be resolved exclusively by the Tokyo District Court, Japan, and you hereby

consent to the exclusive jurisdiction of such court.

Article 9 Severability

If any provision of this EULA shall be held to be invalid, illegal or unenforceable, the validity, legality and

enforceability of the remaining provisions hereof shall not in any way be affected or impaired.

The Software contains Macromedia^®[Flash^®] [Flash Lite™] technology of Adobe Systems Incorporated.

Flash, [and Macromedia Flash Lite] are trademarks or registered trademarks of Adobe Systems Incorporated in

the United States and other countries.

License information on the software used in the TOSHIBA Blu-ray Disc™/DVD player

This document is statement purpose only. Not concerned with operation of this product.

The software pre-installed in the TOSHIBA Blu-ray Disc™/DVD player consists of multiple, independent

software components. Each software component is copyrighted by TOSHIBA or a third party.

The TOSHIBA Blu-ray Disc™/DVD player uses software components that are distributed as freeware under a

third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”). Some

EULAs require that the source code of the applicable component be disclosed as the condition for distributing

the software component in executable format. You can check the software components subject to such EULA

requirements on the following phone number:

Phone number: 888-592-0944

TOSHIBA provides a limited warranty for the TOSHIBA Blu-ray Disc™/DVD player you have purchased

under conditions set forth by TOSHIBA.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

However, some of the software components distributed under an EULA are made available for use by the user

on the assumption that they are not copyrighted or warranted by TOSHIBA or any third party. These software

components are licensed to the user free of charge and therefore not covered by any warranty within the scope

of the applicable laws. These software components are not subject to any copyrights or other third-party rights

and are provided in “as is” condition without any warranty, whether express or implied. “Warranty” here

includes, but not limited to, an implied warranty for marketability or fitness for specific uses. All risks

associated with the quality or performance of these software components are assumed by the user. TOSHIBA

shall not be liable whatsoever for any cost of repair or correction or other incidental expense incurred in

connection with a defect found in any of these software components. Unless specified under the applicable

laws or in a written agreement, a party who changes or redistributes the software with consent from the

arising from the use of or inability to use such software components. The same applies even when the copyright

holders or relevant third parties have been informed of the possibility of such loss. “Loss” here includes

normal, special, incidental and indirect loss (including, but not limited to, the loss of data or its accuracy; loss

incurred by the user or any third party; and interface incompatibility with other software). Please read each

EULA for details on the use conditions and items that must be observed regarding these software components.

The table below lists the software components preinstalled in the TOSHIBA Blu-ray Disc™/DVD player,

which are subject to EULAs. The user should read the applicable EULAs carefully before using these software

components. The EULAs are exhibited in their original text (English) as exactly written by the respective

parties other than TOSHIBA.

The Open-Source Software included in the Blu-ray Disc™/DVD player is described in the table below. To view

the Open-Source agreements, please type in http://oss.bd.toshiba.com/version1 into your browser and click on

the corresponding Open-Source Software License link provided. Additionally, the licenses can be viewed by

typing in the URL addresses listed in the License column.

OSS name

OSS

version

OSS project URL

License

Linux kernel

gcc libgcc

2.6.35

http://www.kernel.org

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

4.5.1

http://gcc.gnu.org/

http://oss.bd.toshiba.com/version1/

GPLv3.pdf

gcc libstdc++ 4.5.1

http://gcc.gnu.org/

http://oss.bd.toshiba.com/version1/

GPLv3.pdf

glibc

2.12.1

3.4

http://www.gnu.org/software/libc/

http://squashfs.sourceforge.net/

http://oss.bd.toshiba.com/version1/

LGPLv2.1.pdf

glibc (other

licenses)

http://oss.bd.toshiba.com/version1/

glibc_2.9.pdf

SquashFS

iputils

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

4.1

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

s2010100 http://www.skbuff.net/iputils/

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

udhcpc

0.9.8cvs20 http://udhcp.sourcearchive.com/downlo http://oss.bd.toshiba.com/version1/

050303-3 ads/0.9.8cvs20050303-3/ GPLv2.pdf

net-tools

1.60

http://www.linuxfromscratch.org/blfs/vie http://oss.bd.toshiba.com/version1/

w/6.3/basicnet/net-tools.html GPLv2.pdf

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

OSS name

OSS

version

OSS project URL

License

sysvinit

2.88dsf

http://savannah.nongnu.org/projects/sy http://oss.bd.toshiba.com/version1/

svinit

GPLv2.pdf

module-init-

tools

3.12

https://modules.wiki.kernel.org/index.p http://oss.bd.toshiba.com/version1/

hp/Main_Page

GPLv2.pdf

util-linux-ng

2.18

http://userweb.kernel.org/~kzak/util-

linux-ng/

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

procps (ps,

top)

3.2.8

22.13

6.9

http://procps.sourceforge.net/index.htm http://oss.bd.toshiba.com/version1/

LGPLv2.1.pdf

psmisc

coreutils

gawk

http://psmisc.sourceforge.net/

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

http://www.gnu.org/software/coreutils/ http://oss.bd.toshiba.com/version1/

GPLv2.pdf

3.1.5

2.5.1a

4.2.31

3.2.48

1.17

http://www.gnu.org/software/gawk/

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

grep

http://www.gnu.org/software/grep/

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

findutils

bash

http://www.gnu.org/software/findutils/ http://oss.bd.toshiba.com/version1/

GPLv2.pdf

http://www.gnu.org/software/bash/

http://www.gnu.org/software/tar/

http://www.gnu.org/software/sed/

http://www.gnu.org/software/gzip/

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

tar

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

sed

4.1.5

1.3.12

1.4.2

5.7

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

gzip

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

inetutils

ncurses

http://www.gnu.org/software/inetutils/ http://oss.bd.toshiba.com/version1/

GPLv2.pdf

http://www.gnu.org/software/ncurses/ http://oss.bd.toshiba.com/version1/

ncurses.pdf

gdb

(gdbserver)

6.6

http://www.gnu.org/software/gdb/

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

Das U-Boot

2009.08 http://www.denx.de/wiki/U-

Boot/WebHome

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

International

Components

for Unicode

3.2.0

http://www.icu-project.org/index.html http://oss.bd.toshiba.com/version1/

ICU.pdf

OpenSSL

0.9.8n

1.2.3

http://www.openssl.org/

http://www.zlib.net/

http://oss.bd.toshiba.com/version1/

OpenSSL.pdf

zlib

http://oss.bd.toshiba.com/version1/

zlib.pdf

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

OSS name

FreeType

Expat

OSS

OSS project URL

License

version

2.3.9

2.0.1

7.19.6

jpeg-7

1.4.0

http://www.freetype.org/

http://expat.sourceforge.net/

http://curl.haxx.se/

http://oss.bd.toshiba.com/version1/

FreeType.txt

http://oss.bd.toshiba.com/version1/

Expat.pdf

libcurl

http://oss.bd.toshiba.com/version1/

cURL.pdf

libjpeg

c-ares

http://www.ijg.org/

http://oss.bd.toshiba.com/version1/

libjpeg.pdf

http://c-ares.haxx.se/

http://oss.bd.toshiba.com/version1/

c-ares.pdf

mtd-utils

http://www.linux-

mtd.infradead.org/index.html

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

WPA

0.5.10

0.6.7

http://hostap.epitest.fi/wpa_supplicant/ http://oss.bd.toshiba.com/version1/

WPA_Supplicant.pdf

Supplicant

WPA

Supplicant

(WPS)

http://hostap.epitest.fi/wpa_supplicant/ http://oss.bd.toshiba.com/version1/

WPA_Supplicant.pdf

Wireless Tools 29

http://www.hpl.hp.com/personal/Jean_T http://oss.bd.toshiba.com/version1/

ourrilhes/Linux/Tools.html

http://www.directfb.org

GPLv2.pdf

DirectFB

Fusion

SaWMan

libpng

1.2.7

http://oss.bd.toshiba.com/version1/

LGPLv2.1.pdf

8.2.0

http://www.directfb.org

http://oss.bd.toshiba.com/version1/

GPLv2.pdf

1.4.0

http://oss.bd.toshiba.com/version1/

LGPLv2.1.pdf

1.2.35

4.6.2

http://www.libpng.org/pub/png/libpng.h http://oss.bd.toshiba.com/version1/

tml

libpng.txt

http://qt.nokia.com/products

http://oss.bd.toshiba.com/version1/

LGPLv2.1.pdf

libxml2

xmlrpc-c

tinyxml

gSOAP

SQLite

2.7.6

http://xmlsoft.org/

http://oss.bd.toshiba.com/version1/

libxml.pdf

1.06.38

2.5.3

http://xmlrpc-c.sourceforge.net/

http://oss.bd.toshiba.com/version1/

XMLrpc.pdf

http://sourceforge.net/projects/tinyxml/ http://oss.bd.toshiba.com/version1/

tinyxml.pdf

2.7.12

3.6.22

http://www.cs.fsu.edu/~englen/soap.ht http://oss.bd.toshiba.com/version1/

gSOAP.pdf

http://www.sqlite.org/

http://oss.bd.toshiba.com/version1/

SQLite.pdf

David M. Gay's dtoa and http://netlib2.cs.utk.edu/fp/dtoa.c

strtod

http://oss.bd.toshiba.com/version1/

DMG.pdf

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

OSS name

OSS

OSS project URL

http://www.gnu.org/software/bison/

License

version

Bison

generated

parser

2.3

http://oss.bd.toshiba.com/version1/

bison.pdf

Doug Lea's malloc

ftp://g.oswego.edu/pub/misc/malloc.c http://oss.bd.toshiba.com/version1/

http://gee.cs.oswego.edu/dl/html/mallo dmalloc.pdf

c.html

EMX sprintf and scanf

JSON_Parser 1.0

Lua interpreter 5.1.3

http://oss.bd.toshiba.com/version1/

EMX.pdf

http://www.json.org/

http://oss.bd.toshiba.com/version1/

JSON.pdf

http://www.lua.org/license.html#5

http://zziplib.sourceforge.net/

http://ffmpeg.org/

http://oss.bd.toshiba.com/version1/

Lua.pdf

zziplib

0.13.58

52.31.0

49.15.0

52.20.0

http://oss.bd.toshiba.com/version1/

Zziplib.pdf

libavformat

libavutil

http://oss.bd.toshiba.com/version1/

LGPLv2.1.pdf

http://ffmpeg.org/

http://oss.bd.toshiba.com/version1/

LGPLv2.1.pdf

libavcodec

http://ffmpeg.org/

http://oss.bd.toshiba.com/version1/

LGPLv2.1.pdf

bison_parser

The distribution terms for Bison-generated parsers permit using the parsers in nonfree programs. Before Bison

version 2.2, these extra permissions applied only when Bison was generating LALR(1) parsers in C. And before

Bison version 1.24, Bison-generated parsers could be used only in programs that were free software.

The other GNU programming tools, such as the GNU C compiler, have never had such a requirement. They could

always be used for nonfree software. The reason Bison was different was not due to a special policy decision; it

resulted from applying the usual General Public License to all of the Bison source code.

The output of the Bison utility the Bison parser file contains a verbatim copy of a sizable piece of Bison, which is

the code for the parser’s implementation. (The actions from your grammar are inserted into this implementation at

one point, but most of the rest of the implementation is not changed.) When we applied the GPL terms to the

skeleton code for the parser’s implementation, the effect was to restrict the use of Bison output to free software.

We didn’t change the terms because of sympathy for people who want to make software proprietary. Software

should be free. But we concluded that limiting Bison’s use to free software was doing little to encourage people to

make other software free. So we decided to make the practical conditions for using Bison match the practical

conditions for using the other GNU tools.

This exception applies when Bison is generating code for a parser. You can tell whether the exception applies to a

Bison output file by inspecting the file for text beginning with ¨As a special exception....

The text spells out the exact terms of the exception.

c-ares

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee

is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice

and this permission notice appear in supporting documentation, and that the name of M.I.T. not be used in

advertising or publicity pertaining to distribution of the software without specific, written prior permission. M.I.T.

makes no representations about the suitability of this software for any purpose. It is provided "as is" without

express or implied warranty.

cURL

Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted,

provided that the above copyright notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN

NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER

DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to

promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.

dmalloc

This is a version (aka dlmalloc) of malloc/free/realloc written by Doug Lea and released to the public

domain, as explained at http://creativecommons.org/licenses/publicdomain. Send questions, comments,

complaints, performance data, etc to [email protected]

DMG’s dtoa and strtod

The author of this software is David M. Gay.

Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted,

provided that this entire notice is included in all copies of any software which is or includes a copy or modification

of this software and in all copies of the supporting documentation for such software.

THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY. IN

PARTICULAR, NEITHER THE AUTHOR NOR LUCENT MAKES ANY REPRESENTATION OR

WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS

FITNESS FOR ANY PARTICULAR PURPOSE.

EMX_sprintf_sscanf

The emx libraries are not distributed under the GPL. Linking an application with the emx libraries does not

cause the executable to be covered by the GNU General Public License. You are allowed to change and copy

the emx library sources if you keep the copyright message intact. If you improve the emx libraries, please send

your enhancements to the emx author (you should copyright your enhancements similar to the existing emx

libraries).

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

Expat

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without limitation the

rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to

permit persons to whom the Software is furnished to do so, subject to the following conditions: The above

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR

IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION

WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

The FreeType Project LICENSE

2006-Jan-27

David Turner, Robert Wilhelm, and Werner Lemberg

Introduction

The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the

FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project.

This license applies to all files found in such packages, and which do not fall under their own explicit license. The

license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.

This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage

inclusion and use of free software in commercial and freeware products alike. As a consequence, its main points

are that:

• We don't promise that this software works. However, we will be interested in any kind of bug reports. (`as is'

distribution)

• You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free'

usage)

• You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must

acknowledge somewhere in your documentation that you have used the FreeType code. (`credits')

We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial

products. We disclaim all warranties covering The FreeType Project and assume no liability related to The

FreeType Project.

Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We

thus encourage you to use the following text:

Portions of this software are copyright <year> The FreeType

Please replace <year> with the value from the FreeType version you actually use.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

Legal Terms

0. Definitions

Throughout this license, the terms `package', `FreeType Project', and `FreeType archive' refer to the set of files

originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType

Project', be they named as alpha, beta or final release.

You' refers to the licensee, or person using the project, where `using' is a generic term including compiling the

project's source code as well as linking it to form a `program' or `executable'. This program is referred to as `a

program using the FreeType engine'.

This license applies to all files distributed in the original FreeType Project, including all source code, binaries and

documentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original

archive. If you are unsure whether or not a particular file is covered by this license, you must contact us to verify

this.

rights reserved except as specified below.

1. No Warranty

THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESS OR IMPLIED, NCLUDING, BUT NOT LIMITED TO, WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL

ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES

CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.

2. Redistribution

This license grants a worldwide, royalty-free, perpetual and irrevocable right nd license to use, execute,

perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType

Project (in both source and object code forms) and derivative works thereof for any purpose; and to

authorize others to exercise some or all of the rights granted herein, subject to the following conditions:

• Redistribution of source code must retain this license file (`FTL.TXT') unaltered; any additions,

deletions or changes to the original files must be clearly indicated in accompanying

documentation. The copyright notices of the unaltered, original files must be preserved in all

copies of source files.

• Redistribution in binary form must provide a disclaimer that states that the software is based in

part of the work of the FreeType Team, in the distribution documentation. We also encourage

you to put an URL to the FreeType web page in your documentation, though this isn't

mandatory. These conditions apply to any software derived from or based on the FreeType

Project, not just the unmodified files. If you use our work, you must acknowledge us. However,

no fee need be paid to us.

3. Advertising

Neither the FreeType authors and contributors nor you shall use the name of the other for

commercial, advertising, or promotional purposes without specific prior written permission. We

suggest, but do not require, that you use one or more of the following phrases to refer to this

software in your documentation or advertising materials: `FreeType Project', `FreeType Engine',

`FreeType library', or `FreeType Distribution'.

As you have not signed this license, you are not required to accept it. However, as the FreeType

Project is copyrighted material, only this license, or another one contracted with the authors,

grants you the right to use, distribute, and modify it. Therefore, by using, distributing, or

modifying the FreeType Project, you indicate that you understand and accept all the terms of this

license.

Contacts

There are two mailing lists related to FreeType:

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

• [email protected] Discusses general use and applications of FreeType, as well as future and

wanted additions to the library and distribution. If you are looking for support, start in this list if

you haven't found anything to help you in the documentation.

• [email protected] Discusses bugs, as well as engine internals, design issues, specific

licenses, porting, etc. Our home page can be found at http://www.freetype.org

This file contains the copying permission notices for various files in the GNU C Library

distribution that have copyright owners other than the Free Software Foundation. These notices

all require that a copy of the notice be included in the accompanying documentation and be

distributed with binary distributions of the code, so be sure to include this file along with any

binary distributions derived from the GNU C Library.

All code incorporated from 4.4 BSD is distributed under the following license:

Redistribution and use in source and binary forms, with or without modification, are permitted

provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions

and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of

conditions and the following disclaimer in the documentation and/or other materials provided

with the distribution.

3. This condition was removed.

4. Neither the name of the University nor the names of its contributors may be used to endorse or

promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS''

AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY

OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The DNS resolver code, taken from BIND 4.9.5, is copyrighted both by UC Berkeley and by

Digital Equipment Corporation. The DEC portions are under the following license:

Permission to use, copy, modify, and distribute this software for any purpose with or without fee

is hereby granted, provided that the above copyright notice and this permission notice appear in

all copies, and that the name of Digital Equipment Corporation not be used in advertising or

publicity pertaining to distribution of the document or software without specific, written prior

permission.

THE SOFTWARE IS PROVIDED ``AS IS'' AND DIGITAL EQUIPMENT CORP. DISCLAIMS

ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL DIGITAL

EQUIPMENT CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM

LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,

NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION

WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

The Sun RPC support (from rpcsrc-4.0) is covered by the following license:

Sun RPC is a product of Sun Microsystems, Inc. and is provided for unrestricted use provided

that this legend is included on all tape media and as a part of the software program in whole or

part. Users may copy or modify Sun RPC without charge, but are not authorized to license or

distribute it to anyone else except as part of a product or program developed by the user.

SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING

THE WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A

PARTICULAR PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR

TRADE PRACTICE.

Sun RPC is provided with no support and without any obligation on the part of Sun

Microsystems, Inc. to assist in its use, correction, modification or enhancement.

SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE

INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC

OR ANY PART THEREOF.

In no event will Sun Microsystems, Inc. be liable for any lost revenue or profits or other special,

indirect and consequential damages, even if Sun has been advised of the possibility of such

damages.

The following CMU license covers some of the support code for Mach, derived from Mach 3.0:

Mach Operating System

Permission to use, copy, modify and distribute this software and its documentation is hereby

granted, provided that both the copyright notice and this permission notice appear in all copies of

the software, derivative works or modified versions, and any portions thereof, and that both

notices appear in supporting documentation.

CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS ``AS IS''

CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR

ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.

Carnegie Mellon requests users of this software to return to

Software Distribution Coordinator

School of Computer Science

Carnegie Mellon University

Pittsburgh PA 15213-3890

or [email protected] any improvements or extensions that they make and

grant Carnegie Mellon the rights to redistribute these changes.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

The file if_ppp.h is under the following CMU license:

Redistribution and use in source and binary forms, with or without modification, are permitted

provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions

and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of

conditions and the following disclaimer in the documentation and/or other materials provided

with the distribution.

3. Neither the name of the University nor the names of its contributors may be used to endorse or

promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY CARNEGIE MELLON UNIVERSITY AND

CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED.

IN NO EVENT SHALL THE UNIVERSITY OR CONTRIBUTORS BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE

GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN

IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The following license covers the files from Intel's "Highly Optimized Mathematical Functions

for Itanium" collection:

Intel License Agreement

Redistribution and use in source and binary forms, with or without modification, are permitted

provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and

the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions

and the following disclaimer in the documentation and/or other materials provided with the

distribution.

The name of Intel Corporation may not be used to endorse or promote products derived from this

software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS

"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY

OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Glibc2.9_License

The files inet/getnameinfo.c and sysdeps/posix/getaddrinfo.c are copyright (C) by Craig Metz

and are distributed under the following license:

The Inner Net License, Version 2.00

The author(s) grant permission for redistribution and use in source and binary forms, with or

without modification, of the software and documentation provided that the following conditions

are met:

0. If you receive a version of the software that is specifically labelled as not being for

redistribution (check the version message and/or README), you are not permitted to

redistribute that version of the software in any way or form.

1. All terms of the all other applicable copyrights and licenses must be followed.

2. Redistributions of source code must retain the authors' copyright notice(s), this list of

conditions, and the following disclaimer.

3. Redistributions in binary form must reproduce the authors' copyright notice(s), this list of

conditions, and the following disclaimer in the documentation and/or other materials provided

with the distribution.

4. The copyright holder has authorized the removal of this clause.

5. Neither the name(s) of the author(s) nor the names of its contributors may be used to endorse

or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY ITS AUTHORS AND CONTRIBUTORS ``AS IS'' AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY

OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

If these license terms cause you a real problem, contact the author.

GPLv2

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but

changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it.

By contrast, the GNU General Public License is intended to guarantee your freedom to share and

change free software—to make sure the software is free for all its users. This General Public

License applies to most of the Free Software Foundation's software and to any other program

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

whose authors commit to using it. (Some other Free Software Foundation software is covered by

the GNU Library General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public

Licenses are designed to make sure that you have the freedom to distribute copies of free

software (and charge for this service if you wish), that you receive source code or can get it if you

want it, that you can change the software or use pieces of it in new free programs; and that you

know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or

to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if

you distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must

give the recipients all the rights that you have. You must make sure that they, too, receive or can

get the source code.

And you must show them these terms so they know their rights. We protect your rights with two

steps: (1) copyright the software, and (2) offer you this license which gives you legal permission

to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain that everyone understands

that there is no warranty for this free software. If the software is modified by someone else and

passed on, we want its recipients to know that what they have is not the original, so that any

problems introduced by others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the

danger that redistributors of a free program will individually obtain patent licenses, in effect

making the program proprietary. To prevent this, we have made it clear that any patent must be

licensed for everyone's free use or not licensed at all. The precise terms and conditions for

copying, distribution and modification follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the

“Program”, below, refers to any such program or work, and a “work based on the Program”

means either the Program or any derivative work under copyright law: that is to say, a work

containing the Program or a portion of it, either verbatim or with modifications and/or translated

into another language. (Hereinafter, translation is included without limitation in the term

“modification”.) Each licensee is addressed as “you”.

Activities other than copying, distribution and modification are not covered by this License; they

are outside its scope. The act of running the Program is not restricted, and the output from the

Program is covered only if its contents constitute a work based on the Program (independent of

having been made by running the Program). Whether that is true depends on what the Program

does.

1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in

any medium, provided that you conspicuously and appropriately publish on each copy an

appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to

this License and to the absence of any warranty; and give any other recipients of the Program a

copy of this License along with the Program. You may charge a fee for the physical act of

transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work

based on the Program, and copy and distribute such modifications or work under the terms of

Section 1 above, provided that you also meet all of these conditions:

a. You must cause the modified files to carry prominent notices stating that you changed the files

and the date of any change.

b. You must cause any work that you distribute or publish, that in whole or in part contains or is

derived from the Program or any part thereof, to be licensed as a whole at no charge to all third

parties under the terms of this License.

c. If the modified program normally reads commands interactively when run, you must cause it,

when started running for such interactive use in the most ordinary way, to print or display an

announcement including an appropriate copyright notice and a notice that there is no warranty

(or else, saying that you provide a warranty) and that users may redistribute the program under

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

these conditions, and telling the user how to view a copy of this License. (Exception: if the

Program itself is interactive but does not normally print such an announcement, your work based

on the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable sections of that work

are not derived from the Program, and can be reasonably considered independent and separate

works in themselves, then this License, and its terms, do not apply to those sections when you

distribute them as separate works. But when you distribute the same sections as part of a whole

which is a work based on the Program, the distribution of the whole must be on the terms of this

License, whose permissions for other licensees extend to the entire whole, and thus to each and

every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or

contest your rights to work written entirely by you; rather, the intent is to exercise the right to

control the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or

with a work based on the Program) on a volume of a storage or distribution medium does not

bring the other work under the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object

code or executable form under the terms of Sections 1 and 2 above provided that you also do one

of the following:

a. Accompany it with the complete corresponding machine-readable source code, which must be

distributed under the terms of Sections 1 and 2 above on a medium customarily used for software

interchange; or,

b. Accompany it with a written offer, valid for at least three years, to give any third party, for a

charge no more than your cost of physically performing source distribution, a complete machine-

readable copy of the corresponding source code, to be distributed under the terms of Sections 1

and 2 above on a medium customarily used for software interchange; or,

c. Accompany it with the information you received as to the offer to distribute corresponding

source code. (This alternative is allowed only for noncommercial distribution and only if you

received the program in object code or executable form with such an offer, in accord with

Subsection b above.) The source code for a work means the preferred form of the work for

making modifications to it. For an executable work, complete source code means all the source

code for all modules it contains, plus any associated interface definition files, plus the scripts

used to control compilation and installation of the executable. However, as a special exception,

the source code distributed need not include anything that is normally distributed (in either

source or binary form) with the major components (compiler, kernel, and so on) of the operating

system on which the executable runs, unless that component itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated

place, then offering equivalent access to copy the source code from the same place counts as

distribution of the source code, even though third parties are not compelled to copy the source

along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided

under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program

is void, and will automatically terminate your rights under this License. However, parties who

have received copies, or rights, from you under this License will not have their licenses

terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing

else grants you permission to modify or distribute the Program or its derivative works. These

actions are prohibited by law if you do not accept this License. Therefore, by modifying or

distributing the Program (or any work based on the Program), you indicate your acceptance of

this License to do so, and all its terms and conditions for copying, distributing or modifying the

Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient

automatically receives a license from the original licensor to copy, distribute or modify the

Program subject to these terms and conditions. You may not impose any further restrictions on

the recipients' exercise of the rights granted herein. You are not responsible for enforcing

compliance by third parties to this License.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other

reason (not limited to patent issues), conditions are imposed on you (whether by court order,

agreement or otherwise) that contradict the conditions of this License, they do not excuse you

from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your

obligations under this License and any other pertinent obligations, then as a consequence you

may not distribute the Program at all. For example, if a patent license would not permit royalty-

free redistribution of the Program by all those who receive copies directly or indirectly through

you, then the only way you could satisfy both it and this License would be to refrain entirely

from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance,

the balance of the section is intended to apply and the section as a whole is intended to apply in

other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right

claims or to contest validity of any such claims; this section has the sole purpose of protecting the

integrity of the free software distribution system, which is implemented by public license

practices. Many people have made generous contributions to the wide range of software

distributed through that system in reliance on consistent application of that system; it is up to the

author/donor to decide if he or she is willing to distribute software through any other system and

a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest

of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents

or by copyrighted interfaces, the original copyright holder who places the Program under this

License may add an explicit geographical distribution limitation excluding those countries, so

that distribution is permitted only in or among countries not thus excluded. In such case, this

License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public

License from time to time. Such new versions will be similar in spirit to the present version, but

may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program specifies a version number

of this License which applies to it and “any later version”, you have the option of following the

terms and conditions either of that version or of any later version published by the Free Software

Foundation. If the Program does not specify a version number of this License, you may choose

any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution

conditions are different, write to the author to ask for permission. For software which is

copyrighted by the Free Software Foundation, write to the Free Software Foundation; we

sometimes make exceptions for this. Our decision will be guided by the two goals of preserving

the free status of all derivatives of our free software and of promoting the sharing and reuse of

software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO

WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE

LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS

AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY

OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND

PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE

DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR

CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN

WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY

MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE

LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF

DATA OR

DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD

PARTIES OR

A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN

IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.

END OF TERMS AND CONDITIONS

Appendix: How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the

best way to achieve this is to make it free software which everyone can redistribute and change

under these terms. To do so, attach the following notices to the program. It is safest to attach

them to the start of each source file to most effectively convey the exclusion of warranty; and

each file should have at least the “copyright” line and a pointer to where the full notice is found.

one line to give the program's name and a brief idea of what it does.

This program is free software; you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation; either version 2 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program; if not, write to the Free Software

Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it starts in an interactive

mode:

Gnomovision version 69, Copyright (C) 19yy name of author

Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.

This is free software, and you are welcome to redistribute it

under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts of the

General Public

License. Of course, the commands you use may be called something other than `show w' and

`show c'; they

could even be mouse-clicks or menu items—whatever suits your program.

You should also get your employer (if you work as a programmer) or your school, if any, to sign

a “copyright

disclaimer” for the program, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program

`Gnomovision' (which makes passes at compilers) written by James Hacker.

signature of Ty Coon, 1 April 1989

Ty Coon, President of Vice

This General Public License does not permit incorporating your program into proprietary

programs. If your program is a subroutine library, you may consider it more useful to permit

linking proprietary applications with

the library. If this is what you want to do, use the GNU Library General Public License instead of

this License.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

GPLv3

GNU GENERAL PUBLIC LICENSE

Version 3, 29 June 2007

Everyone is permitted to copy and distribute verbatim copies of this license document, but

changing it is not allowed.

Preamble

The GNU General Public License is a free, copyleft license for software and other kinds of

works.

The licenses for most software and other practical works are designed to take away your freedom

to share and change the works. By contrast, the GNU General Public License is intended to

guarantee your freedom to share and change all versions of a program--to make sure it remains

free software for all its users. We, the Free Software Foundation, use the GNU General Public

License for most of our software; it applies also to any other work released this way by its

authors. You can apply it to your programs, too. When we speak of free software, we are

referring to freedom, not price. Our General Public Licenses are designed to make sure that you

have the freedom to distribute copies of free software (and charge for them if you wish), that you

receive source code or can get it if you want it, that you can change the software or use pieces of

it in new free programs, and that you know you can do these things.

To protect your rights, we need to prevent others from denying you these rights or asking you to

surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the

software, or if you modify it: responsibilities to respect the freedom of others. For example, if

you distribute copies of such a program, whether gratis or for a fee, you must pass on to the

recipients the same freedoms that you received. You must make sure that they, too, receive or can

get the source code. And you must show them these terms so they know their rights. Developers

that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software,

and (2) offer you this License giving you legal permission to copy, distribute and/or modify it.

For the developers' and authors' protection, the GPL clearly explains that there is no warranty for

this free software. For both users' and authors' sake, the GPL requires that modified versions be

marked as changed, so that their problems will not be attributed erroneously to authors of

previous versions.

Some devices are designed to deny users access to install or run modified versions of the

software inside them, although the manufacturer can do so. This is fundamentally incompatible

with the aim of protecting users' freedom to change the software. The systematic pattern of such

abuse occurs in the area of products for individuals to use, which is precisely where it is most

unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for

those products. If such problems arise substantially in other domains, we stand ready to extend

this provision to those domains in future versions of the GPL, as needed to protect the freedom of

users.

Finally, every program is threatened constantly by software patents. States should not allow

patents to restrict development and use of software on general-purpose computers, but in those

that do, we wish to avoid the special danger that patents applied to a free program could make it

effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the

program non-free. The precise terms and conditions for copying, distribution and modification

follow.

TERMS AND CONDITIONS

0. Definitions.

“This License” refers to version 3 of the GNU General Public License.

“Copyright” also means copyright-like laws that apply to other kinds of works, such as

semiconductor masks.

“The Program” refers to any copyrightable work licensed under this License. Each licensee is

addressed as “you”. “Licensees” and “recipients” may be individuals or organizations.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring

“modified version” of the earlier work or a work “based on” the earlier work.

A “covered work” means either the unmodified Program or a work based on the Program.

To “propagate” a work means to do anything with it that, without permission, would make you

directly or secondarily liable for infringement under applicable copyright law, except executing it

on a computer or modifying a private copy. Propagation includes copying, distribution (with or

without modification), making available to the public, and in some countries other activities as

well.

To “convey” a work means any kind of propagation that enables other parties to make or receive

copies. Mere interaction with a user through a computer network, with no transfer of a copy, is

not conveying. An interactive user interface displays “Appropriate Legal Notices” to the extent

that it includes a convenient and prominently visible feature that (1) displays an appropriate

that warranties are provided), that licensees may convey the work under this License, and how to

view a copy of this License. If the interface presents a list of user commands or options, such as a

menu, a prominent item in the list meets this criterion.

1. Source Code.

The “source code” for a work means the preferred form of the work for making modifications to

it. “Object code” means any non-source form of a work.

A “Standard Interface” means an interface that either is an official standard defined by a

recognized standards body, or, in the case of interfaces specified for a particular programming

language, one that is widely used among developers working in that language.

The “System Libraries” of an executable work include anything, other than the work as a whole,

that (a) is included in the normal form of packaging a Major Component, but which is not part of

that Major Component,

and (b) serves only to enable use of the work with that Major Component, or to implement a

Standard Interface for which an implementation is available to the public in source code form. A

“Major Component”, in this context, means a major essential component (kernel, window

system, and so on) of the specific operating system (if any) on which the executable work runs,

or a compiler used to produce the work, or an object code

interpreter used to run it.

The “Corresponding Source” for a work in object code form means all the source code needed to

generate, install, and (for an executable work) run the object code and to modify the work,

including scripts to control those activities. However, it does not include the work's System

Libraries, or general-purpose tools or generally available free programs which are used

unmodified in performing those activities but which are not part of the work. For example,

Corresponding Source includes interface definition files associated with source files for the

work, and the source code for shared libraries and dynamically linked subprograms that the work

is specifically designed to require, such as by intimate data communication or control flow

between those subprograms and other parts of the work.

The Corresponding Source need not include anything that users can regenerate automatically

from other parts of the Corresponding Source.

The Corresponding Source for a work in source code form is that same work.

2. Basic Permissions.

All rights granted under this License are granted for the term of copyright on the Program, and

are irrevocable provided the stated conditions are met. This License explicitly affirms your

unlimited permission to run the unmodified Program. The output from running a covered work is

covered by this License only if the output, given its content, constitutes a covered work. This

License acknowledges your rights of fair use or other equivalent, as provided by copyright law.

You may make, run and propagate covered works that you do not convey, without conditions so

long as your license otherwise remains in force. You may convey covered works to others for the

sole purpose of having them make modifications exclusively for you, or provide you with

facilities for running those works, provided

that you comply with the terms of this License in conveying all material for which you do not

control copyright. Those thus making or running the covered works for you must do so

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

exclusively on your behalf, under your direction and control, on terms that prohibit them from

making any copies of your copyrighted material outside their relationship with you.

Conveying under any other circumstances is permitted solely under the conditions stated below.

Sublicensing is not allowed; section 10 makes it unnecessary.

3. Protecting Users' Legal Rights From Anti-Circumvention Law.

No covered work shall be deemed part of an effective technological measure under any

applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20

December 1996, or similar laws prohibiting or restricting circumvention of such measures.

When you convey a covered work, you waive any legal power to forbid circumvention of

technological measures to the extent such circumvention is effected by exercising rights under

this License with respect to the covered work, and you disclaim any intention to limit operation

or modification of the work as a means of enforcing, against the work's users, your or third

parties' legal rights to forbid circumvention of technological measures.

4. Conveying Verbatim Copies.

You may convey verbatim copies of the Program's source code as you receive it, in any medium,

provided that you conspicuously and appropriately publish on each copy an appropriate

added in accord with section 7 apply to the code; keep intact all notices of the absence of any

warranty; and give all recipients a copy of this License along with the Program.

You may charge any price or no price for each copy that you convey, and you may offer support

or warranty

protection for a fee.

5. Conveying Modified Source Versions.

You may convey a work based on the Program, or the modifications to produce it from the

Program, in the form of source code under the terms of section 4, provided that you also meet all

of these conditions:

a) The work must carry prominent notices stating that you modified it, and giving a relevant date.

b) The work must carry prominent notices stating that it is released under this License and any

conditions added under section 7. This requirement modifies the requirement in section 4 to

“keep intact all notices”.

c) You must license the entire work, as a whole, under this License to anyone who comes into

possession of a copy. This License will therefore apply, along with any applicable section 7

additional terms, to the whole of the work, and all its parts, regardless of how they are packaged.

This License gives no permission to license the work in any other way, but it does not invalidate

such permission if you have separately received it.

d) If the work has interactive user interfaces, each must display Appropriate Legal Notices;

however, if the Program has interactive interfaces that do not display Appropriate Legal Notices,

your work need not make them do so.

A compilation of a covered work with other separate and independent works, which are not by

their nature extensions of the covered work, and which are not combined with it such as to form a

larger program, in or on

a volume of a storage or distribution medium, is called an “aggregate” if the compilation and its

resulting copyright are not used to limit the access or legal rights of the compilation's users

beyond what the individual works permit. Inclusion of a covered work in an aggregate does not

cause this License to apply to the other

parts of the aggregate.

6. Conveying Non-Source Forms.

You may convey a covered work in object code form under the terms of sections 4 and 5,

provided that you

also convey the machine-readable Corresponding Source under the terms of this License, in one

of these

ways:

a) Convey the object code in, or embodied in, a physical product (including a physical

distribution medium), accompanied by the Corresponding Source fixed on a durable physical

medium customarily used for software interchange.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

b) Convey the object code in, or embodied in, a physical product (including a physical

distribution medium), accompanied by a written offer, valid for at least three years and valid for

as long as you offer spare parts or customer support for that product model, to give anyone who

possesses the object code either (1) a copy of the Corresponding Source for all the software in the

product that is covered by this License, on a durable physical medium customarily used for

software interchange, for a price no more than your reasonable cost of physically performing this

conveying of source, or (2) access to copy the Corresponding Source from a network server at no

charge.

c) Convey individual copies of the object code with a copy of the written offer to provide the

Corresponding Source. This alternative is allowed only occasionally and noncommercially, and

only if you received the object code with such an offer, in accord with subsection 6b.

d) Convey the object code by offering access from a designated place (gratis or for a charge), and

offer equivalent access to the Corresponding Source in the same way through the same place at

no further charge. You need not require recipients to copy the Corresponding Source along with

the object code. If the place to copy the object code is a network server, the Corresponding

Source may be on a different server (operated by you or a third party) that supports equivalent

copying facilities, provided you maintain clear directions next to the object code saying where to

find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you

remain obligated to ensure that it is available for as long as needed to satisfy these requirements.

e) Convey the object code using peer-to-peer transmission, provided you inform other peers

where the object code and Corresponding Source of the work are being offered to the general

public at no charge under subsection 6d. A separable portion of the object code, whose source

code is excluded from the Corresponding Source as a System Library, need not be included in

conveying the object code work.

A “User Product” is either (1) a “consumer product”, which means any tangible personal

property which is normally used for personal, family, or household purposes, or (2) anything

designed or sold for incorporation into a dwelling. In determining whether a product is a

consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product

received by a particular user, “normally used” refers to a typical or common use of that class of

product, regardless of the status of the particular user or of the way in which the particular user

actually uses, or expects or is expected to use, the product. A product is a consumer product

regardless of whether the product has substantial commercial, industrial or non-consumer uses,

unless such uses represent the only significant mode of use of the product.

“Installation Information” for a User Product means any methods, procedures, authorization

keys, or other information required to install and execute modified versions of a covered work in

that User Product from a modified version of its Corresponding Source. The information must

suffice to ensure that the continued functioning of the modified object code is in no case

prevented or interfered with solely because modification

has been made.

If you convey an object code work under this section in, or with, or specifically for use in, a User

Product, and

the conveying occurs as part of a transaction in which the right of possession and use of the User

Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the

transaction is characterized), the Corresponding Source conveyed under this section must be

accompanied by the Installation Information. But this requirement does not apply if neither you

nor any third party retains the ability to install modified object code on the User Product (for

example, the work has been installed in ROM).

The requirement to provide Installation Information does not include a requirement to continue

to provide support service, warranty, or updates for a work that has been modified or installed by

the recipient, or for the User Product in which it has been modified or installed. Access to a

network may be denied when the modification itself materially and adversely affects the

operation of the network or violates the rules and protocols for communication across the

network. Corresponding Source conveyed, and Installation Information provided, in accord with

this section must be in a format that is publicly documented (and with an implementation

available to the public in source code form), and must require no special password or key for

unpacking, reading or copying.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

7. Additional Terms.

“Additional permissions” are terms that supplement the terms of this License by making

exceptions from one or more of its conditions. Additional permissions that are applicable to the

entire Program shall be treated as though they were included in this License, to the extent that

they are valid under applicable law. If additional permissions apply only to part of the Program,

that part may be used separately under those permissions, but the entire Program remains

governed by this License without regard to the additional permissions.

When you convey a copy of a covered work, you may at your option remove any additional

permissions from that copy, or from any part of it. (Additional permissions may be written to

require their own removal in certain cases when you modify the work.) You may place additional

permissions on material, added by you to a covered work, for which you have or can give

appropriate copyright permission.

Notwithstanding any other provision of this License, for material you add to a covered work, you

may (if authorized by the copyright holders of that material) supplement the terms of this License

with terms:

a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of

this License; or

b) Requiring preservation of specified reasonable legal notices or author attributions in that

material or in the Appropriate Legal Notices displayed by works containing it; or

c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions

of such material be marked in reasonable ways as different from the original version; or

d) Limiting the use for publicity purposes of names of licensors or authors of the material; or

e) Declining to grant rights under trademark law for use of some trade names, trademarks, or

service marks; or

f) Requiring indemnification of licensors and authors of that material by anyone who conveys the

material (or modified versions of it) with contractual assumptions of liability to the recipient, for

any liability that these contractual assumptions directly impose on those licensors and authors.

All other non-permissive additional terms are considered “further restrictions” within the

meaning of section

10. If the Program as you received it, or any part of it, contains a notice stating that it is governed

by this License along with a term that is a further restriction, you may remove that term. If a

license document contains a further restriction but permits relicensing or conveying under this

License, you may add to a covered work material governed by the terms of that license

document, provided that the further restriction does not survive such relicensing or conveying. If

you add terms to a covered work in accord with this section, you must place, in the relevant

source files, a statement of the additional terms that apply to those files, or a notice indicating

where to find the applicable terms.

Additional terms, permissive or non-permissive, may be stated in the form of a separately written

license, or

stated as exceptions; the above requirements apply either way.

8. Termination.

You may not propagate or modify a covered work except as expressly provided under this

License. Any attempt otherwise to propagate or modify it is void, and will automatically

terminate your rights under this License (including any patent licenses granted under the third

paragraph of section 11).

However, if you cease all violation of this License, then your license from a particular copyright

holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally

terminates your license,

and (b) permanently, if the copyright holder fails to notify you of the violation by some

reasonable means prior

to 60 days after the cessation.

Moreover, your license from a particular copyright holder is reinstated permanently if the

have received notice of violation of this License (for any work) from that copyright holder, and

you cure the violation prior to 30 days

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

after your receipt of the notice. Termination of your rights under this section does not terminate

the licenses of parties who have received copies or rights from you under this License. If your

rights have been terminated and not permanently reinstated, you do not qualify to receive new

licenses for the same material under section 10.

9. Acceptance Not Required for Having Copies.

You are not required to accept this License in order to receive or run a copy of the Program.

Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer

transmission to receive a copy likewise does not require acceptance. However, nothing other than

this License grants you permission to propagate or modify any covered work. These actions

infringe copyright if you do not accept this License. Therefore, by modifying or propagating a

covered work, you indicate your acceptance of this License to do so.

10. Automatic Licensing of Downstream Recipients.

Each time you convey a covered work, the recipient automatically receives a license from the

original licensors, to run, modify and propagate that work, subject to this License. You are not

responsible for enforcing compliance by third parties with this License.

An “entity transaction” is a transaction transferring control of an organization, or substantially all

assets of one, or subdividing an organization, or merging organizations. If propagation of a

covered work results from an entity transaction, each party to that transaction who receives a

copy of the work also receives whatever licenses to the work the party's predecessor in interest

had or could give under the previous paragraph, plus a right to possession of the Corresponding

Source of the work from the predecessor in interest, if the predecessor has it or can get it with

reasonable efforts.

You may not impose any further restrictions on the exercise of the rights granted or affirmed

under this License. For example, you may not impose a license fee, royalty, or other charge for

exercise of rights granted under this License, and you may not initiate litigation (including a

cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making,

using, selling, offering for sale, or importing the Program or any portion of it.

11. Patents.

A “contributor” is a copyright holder who authorizes use under this License of the Program or a

work on which the Program is based. The work thus licensed is called the contributor's

“contributor version”.

A contributor's “essential patent claims” are all patent claims owned or controlled by the

contributor, whether already acquired or hereafter acquired, that would be infringed by some

manner, permitted by this License, of making, using, or selling its contributor version, but do not

include claims that would be infringed only as a consequence of further modification of the

contributor version. For purposes of this definition, “control” includes the right to grant patent

sublicenses in a manner consistent with the requirements of this License.

Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the

contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run,

modify and propagate the contents of its contributor version.

In the following three paragraphs, a “patent license” is any express agreement or commitment,

however denominated, not to enforce a patent (such as an express permission to practice a patent

or covenant not to sue for patent infringement). To “grant” such a patent license to a party means

to make such an agreement or commitment not to enforce a patent against the party.

If you convey a covered work, knowingly relying on a patent license, and the Corresponding

Source of the work is not available for anyone to copy, free of charge and under the terms of this

License, through a publicly available network server or other readily accessible means, then you

must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive

yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner

consistent with the requirements of this License, to extend the patent license to downstream

recipients. “Knowingly relying” means you have actual knowledge that, but for the patent

license, your conveying the covered work in a country, or your recipient's use of the covered

work in a country, would infringe one or more identifiable patents in that country that you have

reason to believe are valid.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

If, pursuant to or in connection with a single transaction or arrangement, you convey, or

propagate by procuring conveyance of, a covered work, and grant a patent license to some of the

parties receiving the covered work authorizing them to use, propagate, modify or convey a

specific copy of the covered work, then the patent license you grant is automatically extended to

all recipients of the covered work and works based on it.

A patent license is “discriminatory” if it does not include within the scope of its coverage,

prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that

are specifically granted under this License. You may not convey a covered work if you are a party

to an arrangement with a third party that is in the business of distributing software, under which

you make payment to the third party based on the extent of your activity of conveying the work,

and under which the third party grants, to any of the parties who would receive the covered work

from you, a discriminatory patent license (a) in connection with copies of the covered work

conveyed by you (or copies made from those copies), or (b) primarily for and in connection with

specific products or compilations that contain the covered work, unless you entered into that

arrangement, or that patent license was granted, prior to 28 March 2007.

Nothing in this License shall be construed as excluding or limiting any implied license or other

defenses to infringement that may otherwise be available to you under applicable patent law.

12. No Surrender of Others' Freedom.

If conditions are imposed on you (whether by court order, agreement or otherwise) that

contradict the conditions of this License, they do not excuse you from the conditions of this

License. If you cannot convey a covered work so as to satisfy simultaneously your obligations

under this License and any other pertinent obligations, then as a consequence you may not

convey it at all. For example, if you agree to terms that obligate you to collect a royalty for

further conveying from those to whom you convey the Program, the only way you could satisfy

both those terms and this License would be to refrain entirely from conveying the Program.

13. Use with the GNU Affero General Public License.

Notwithstanding any other provision of this License, you have permission to link or combine any

covered

work with a work licensed under version 3 of the GNU Affero General Public License into a

single combined

work, and to convey the resulting work. The terms of this License will continue to apply to the

part which is

the covered work, but the special requirements of the GNU Affero General Public License,

section 13,

concerning interaction through a network will apply to the combination as such.

14. Revised Versions of this License.

The Free Software Foundation may publish revised and/or new versions of the GNU General

Public License from time to time. Such new versions will be similar in spirit to the present

version, but may differ in detail to

address new problems or concerns. Each version is given a distinguishing version number. If the

Program specifies that a certain numbered version of the GNU General Public License “or any

later version” applies to it, you have the option of following the terms and conditions either of

that numbered version or of any later version published by the Free Software Foundation. If the

Program does not specify a version number of the GNU General Public License, you may choose

any version ever published by the Free Software Foundation.

If the Program specifies that a proxy can decide which future versions of the GNU General

Public License can be used, that proxy's public statement of acceptance of a version permanently

authorizes you to choose that version for the Program.

Later license versions may give you additional or different permissions. However, no additional

obligations are

imposed on any author or copyright holder as a result of your choosing to follow a later version.

15. Disclaimer of Warranty.

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY

APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE

RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.

SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL

NECESSARY SERVICING, REPAIR OR CORRECTION.

16. Limitation of Liability.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN

WRITING WILL ANY

THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,

INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL

DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM

(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED

INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE

OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH

HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES.

17. Interpretation of Sections 15 and 16.

If the disclaimer of warranty and limitation of liability provided above cannot be given local legal

effect according to their terms, reviewing courts shall apply local law that most closely

approximates an absolute waiver of all civil liability in connection with the Program, unless a

warranty or assumption of liability accompanies a copy of the Program in return for a fee.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the

best way to achieve this is to make it free software which everyone can redistribute and change

under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of

each source file to most effectively state the exclusion of warranty; and each file should have at

least the “copyright” line and a pointer to where the full notice is found.

This program is free software: you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation, either version 3 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program. If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

If the program does terminal interaction, make it output a short notice like this when it starts in an

interactive

mode:

<program> Copyright (C) <year> <name of author>

This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.

This is free software, and you are welcome to redistribute it

under certain conditions; type `show c' for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

The hypothetical commands `show w' and `show c' should show the appropriate parts of the

General Public License. Of course, your program's commands might be different; for a GUI

interface, you would use an “about box”.

You should also get your employer (if you work as a programmer) or school, if any, to sign a

“copyright disclaimer” for the program, if necessary. For more information on this, and how to

apply and follow the GNU

GPL, see <http://www.gnu.org/licenses/>.

The GNU General Public License does not permit incorporating your program into proprietary

programs. If your program is a subroutine library, you may consider it more useful to permit

linking proprietary applications

with the library. If this is what you want to do, use the GNU Lesser General Public License

instead of this License. But first, please read <http://www.gnu.org/philosophy/why-not-

lgpl.html>.

gSOAP.

The following notice is applicable to the CinemaNow® SDK. Company is required to include

such notice in the documentation for any Embedded Products it distributes.

Part of the software embedded in this product is gSOAP software.

Inc. All Rights

Reserved.

THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT

OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR

BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

ICU License - ICU 1.8.1 and later

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and

associated documentation files (the "Software"), to deal in the Software without restriction,

including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell

copies of the Software, and to permit persons to whom the Software is furnished to do so,

provided that the above copyright notice(s) and this permission notice appear in all copies of the

Software and that both the above copyright notice(s) and this permission notice appear in

supporting documentation.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE

ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY

DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,

WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS

ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE

OF THIS SOFTWARE.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

Except as contained in this notice, the name of a copyright holder shall not be used in advertising

or otherwise to promote the sale, use or other dealings in this Software without prior written

authorization of the copyright holder.

All trademarks and registered trademarks mentioned herein are the property of their respective

owners.

IJG license

Description

In plain English:

1. We don't promise that this software works. (But if you find any bugs, please let us know!)

2. You can use this software for whatever you want. You don't have to pay us.

3. You may not pretend that you wrote this software. If you use it in a program, you must

acknowledge somewhere in your documentation that you've used the IJG code.

In legalese:

The authors make NO WARRANTY or representation, either express or implied, with respect to

this software,

its quality, accuracy, merchantability, or fitness for a particular purpose. This software is

provided "AS IS", and you, its user, assume the entire risk as to its quality and accuracy. This

except as specified below.

Permission is hereby granted to use, copy, modify, and distribute this software (or portions

thereof) for any

purpose, without fee, subject to these

Conditions

(1) If any part of the source code for this software is distributed, then this README file must be

included, with this copyright and no-warranty notice unaltered; and any additions, deletions, or

changes to the original files must be clearly indicated in accompanying documentation. (2) If

only executable code is distributed, then the accompanying documentation must state that "this

software is based in part on the work of the Independent JPEG Group". (3) Permission for use of

this software is granted only if the user accepts full responsibility for any undesirable

consequences; the authors accept NO LIABILITY for damages of any kind.

These conditions apply to any software derived from or based on the IJG code, not just to the

unmodified library. If you use our work, you ought to acknowledge us.

Permission is NOT granted for the use of any IJG author's name or company name in advertising

or publicity relating to this software or products derived from it. This software may be referred to

only as "the Independent JPEG Group's software".

We specifically permit and encourage the use of this software as the basis of commercial

products, provided that all warranty or liability claims are assumed by the product vendor.

ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole proprietor of its

above copyright and conditions, but instead by the usual distribution terms of the Free Software

Foundation; principally, that you must include source code if you redistribute it. (See the file

ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part of any program

generated from the IJG code, this does not limit you more than the foregoing paragraphs do.

The Unix configuration script "configure" was produced with GNU Autoconf. It is copyright by

the Free Software Foundation but is freely distributable. The same holds for its supporting scripts

(config.guess, config.sub, ltmain.sh). Another support script, install-sh, is copyright by X

Consortium but is also freely distributable.

The IJG distribution formerly included code to read and write GIF files. To avoid entanglement

with the Unisys LZW patent, GIF reading support has been removed altogether, and the GIF

writer has been simplified to produce "uncompressed GIFs". This technique does not use the

LZW algorithm; the resulting GIF files are larger than usual, but are readable by all standard GIF

decoders.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

We are required to state that "The Graphics Interchange Format(c) is the Copyright property of

CompuServe Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated."

JSON_Parser

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and

associated documentation files (the “Software”), to deal in the Software without restriction,

including without limitation the rights to use, copy, modify, merge, publish, distribute,

sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is

furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in allcopies or

substantial portions of the Software.The Software shall be used for Good, not Evil.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER

DEALINGS IN THE SOFTWARE.

LGPLv2.1

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but

changing it is not allowed.

[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU

Library Public License, version 2, hence the version number 2.1.]

Preamble

The licenses for most software are designed to take away your freedom to share and change it.

By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share

and change free software--to make sure the software is free for all its users.

This license, the Lesser General Public License, applies to some specially designated software

packages--typically libraries--of the Free Software Foundation and other authors who decide to

use it. You can use it too, but we suggest you first think carefully about whether this license or the

ordinary General Public License is the better strategy to use in any particular case, based on the

explanations below.

When we speak of free software, we are referring to freedom of use, not price. Our General

Public Licenses are designed to make sure that you have the freedom to distribute copies of free

software (and charge for this service if you wish); that you receive source code or can get it if you

want it; that you can change the software and use pieces of it in new free programs; and that you

are informed that you can do these things.

To protect your rights, we need to make restrictions that forbid distributors to deny you these

rights or to ask you to surrender these rights. These restrictions translate to certain

responsibilities for you if you distribute copies of the library or if you modify it.

For example, if you distribute copies of the library, whether gratis or for a fee, you must give the

recipients all

the rights that we gave you. You must make sure that they, too, receive or can get the source code.

If you link other code with the library, you must provide complete object files to the recipients, so

that they can relink them with the library after making changes to the library and recompiling it.

And you must show them these terms so they know their rights.

We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you

this license, which gives you legal permission to copy, distribute and/or modify the library.

To protect each distributor, we want to make it very clear that there is no warranty for the free

library. Also, if the library is modified by someone else and passed on, the recipients should

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

know that what they have is not the original version, so that the original author's reputation will

not be affected by problems that might be introduced by others.

Finally, software patents pose a constant threat to the existence of any free program. We wish to

make sure that a company cannot effectively restrict the users of a free program by obtaining a

restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a

version of the library must be consistent with the full freedom of use specified in this license.

Most GNU software, including some libraries, is covered by the ordinary GNU General Public

License. This license, the GNU Lesser General Public License, applies to certain designated

libraries, and is quite different from the ordinary General Public License. We use this license for

certain libraries in order to permit linking those libraries into non-free programs.

When a program is linked with a library, whether statically or using a shared library, the

combination of the two is legally speaking a combined work, a derivative of the original library.

The ordinary General Public License therefore permits such linking only if the entire

combination fits its criteria of freedom. The Lesser General Public License permits more lax

criteria for linking other code with the library.

We call this license the "Lesser" General Public License because it does Less to protect the user's

freedom than the ordinary General Public License. It also provides other free software developers

Less of an advantage over competing non-free programs. These disadvantages are the reason we

use the ordinary General Public License for many libraries. However, the Lesser license provides

advantages in certain special circumstances.

For example, on rare occasions, there may be a special need to encourage the widest possible use

of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs

must be allowed to use the library. A more frequent case is that a free library does the same job as

widely used non-free libraries. In this case, there is little to gain by limiting the free library to

free software only, so we use the Lesser General Public License.

In other cases, permission to use a particular library in non-free programs enables a greater

number of people to use a large body of free software. For example, permission to use the GNU

C Library in non-free programs enables many more people to use the whole GNU operating

system, as well as its variant, the GNU/Linux operating system.

Although the Lesser General Public License is Less protective of the users' freedom, it does

ensure that the user of a program that is linked with the Library has the freedom and the

wherewithal to run that program using a modified version of the Library.

The precise terms and conditions for copying, distribution and modification follow. Pay close

attention to the difference between a "work based on the library" and a "work that uses the

library". The former contains code derived from the library, whereas the latter must be combined

with the library in order to run.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License Agreement applies to any software library or other program which contains a

notice placed by

the copyright holder or other authorized party saying it may be distributed under the terms of this

Lesser General Public License (also called "this License"). Each licensee is addressed as "you".

A "library" means a collection of software functions and/or data prepared so as to be

conveniently linked with application programs (which use some of those functions and data) to

form executables.

The "Library", below, refers to any such software library or work which has been distributed

under these terms. A "work based on the Library" means either the Library or any derivative

work under copyright law: that is to say, a work containing the Library or a portion of it, either

verbatim or with modifications and/or translated straightforwardly into another language.

(Hereinafter, translation is included without limitation in the term "modification".)

"Source code" for a work means the preferred form of the work for making modifications to it.

For a library, complete source code means all the source code for all modules it contains, plus

any associated interface definition files, plus the scripts used to control compilation and

installation of the library.

Activities other than copying, distribution and modification are not covered by this License; they

are outside its scope. The act of running a program using the Library is not restricted, and output

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

from such a program is covered only if its contents constitute a work based on the Library

(independent of the use of the Library in a tool for writing it). Whether that is true depends on

what the Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies of the Library's complete source code as you

receive it, in any medium, provided that you conspicuously and appropriately publish on each

copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that

refer to this License and to the absence of any warranty; and distribute a copy of this License

along with the Library.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer

warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work

based on the Library, and copy and distribute such modifications or work under the terms of

Section 1 above, provided that you also meet all of these conditions:

a) The modified work must itself be a software library.

b) You must cause the files modified to carry prominent notices stating that you changed the files

and the date of any change.

c) You must cause the whole of the work to be licensed at no charge to all third parties under the

terms of this License.

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an

application program that uses the facility, other than as an argument passed when the facility is

invoked, then you must make a good faith effort to ensure that, in the event an application does

not supply such function or table, the facility still operates, and performs whatever part of its

purpose remains meaningful.

(For example, a function in a library to compute square roots has a purpose that is entirely well-

defined independent of the application. Therefore, Subsection 2d requires that any application-

supplied function or table used by this function must be optional: if the application does not

supply it, the square root function must still compute square roots.)

These requirements apply to the modified work as a whole. If identifiable sections of that work

are not derived from the Library, and can be reasonably considered independent and separate

works in themselves, then this License, and its terms, do not apply to those sections when you

distribute them as separate works. But when you distribute the same sections as part of a whole

which is a work based on the Library, the distribution of the whole must be on the terms of this

License, whose permissions for other licensees extend to the entire whole, and thus to each and

every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written

entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or

collective works based on the Library.

In addition, mere aggregation of another work not based on the Library with the Library (or with

a work based

on the Library) on a volume of a storage or distribution medium does not bring the other work

under the scope of this License.

3. You may opt to apply the terms of the ordinary GNU General Public License instead of this

License to a given copy of the Library. To do this, you must alter all the notices that refer to this

License, so that they refer to the ordinary GNU General Public License, version 2, instead of to

this License. (If a newer version than version 2 of the ordinary GNU General Public License has

appeared, then you can specify that version instead if you wish.) Do not make any other change

in these notices.

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU

General Public License applies to all subsequent copies and derivative works made from that

copy.

This option is useful when you wish to copy part of the code of the Library into a program that is

not a library.

4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in

object code or executable form under the terms of Sections 1 and 2 above provided that you

accompany it with the complete corresponding machine-readable source code, which must be

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

distributed under the terms of Sections 1 and 2 above on a medium customarily used for software

interchange.

If distribution of object code is made by offering access to copy from a designated place, then

offering equivalent access to copy the source code from the same place satisfies the requirement

to distribute the source code, even though third parties are not compelled to copy the source

along with the object code.

5. A program that contains no derivative of any portion of the Library, but is designed to work

with the Library

by being compiled or linked with it, is called a "work that uses the Library". Such a work, in

isolation, is not a

derivative work of the Library, and therefore falls outside the scope of this License.

However, linking a "work that uses the Library" with the Library creates an executable that is a

derivative of the Library (because it contains portions of the Library), rather than a "work that

uses the library". The executable is therefore covered by this License. Section 6 states terms for

distribution of such executables.

When a "work that uses the Library" uses material from a header file that is part of the Library,

the object code for the work may be a derivative work of the Library even though the source code

is not. Whether this is true is especially significant if the work can be linked without the Library,

or if the work is itself a library.

The threshold for this to be true is not precisely defined by law.

If such an object file uses only numerical parameters, data structure layouts and accessors, and

small macros and small inline functions (ten lines or less in length), then the use of the object file

is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this

object code plus portions of the Library will still fall under Section 6.)

Otherwise, if the work is a derivative of the Library, you may distribute the object code for the

work under the terms of Section 6. Any executables containing that work also fall under Section

6, whether or not they are linked directly with the Library itself.

6. As an exception to the Sections above, you may also combine or link a "work that uses the

Library" with the Library to produce a work containing portions of the Library, and distribute

that work under terms of your choice, provided that the terms permit modification of the work for

the customer's own use and reverse engineering for debugging such modifications.

You must give prominent notice with each copy of the work that the Library is used in it and that

the Library and its use are covered by this License. You must supply a copy of this License. If the

work during execution displays copyright notices, you must include the copyright notice for the

Library among them, as well as a reference directing the user to the copy of this License. Also,

you must do one of these things:

a) Accompany the work with the complete corresponding machine-readable source code for the

Library including whatever changes were used in the work (which must be distributed under

Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the

complete machine-readable "work that uses the Library", as object code and/or source code, so

that the user can modify the Library and then relink to produce a modified executable containing

the modified Library. (It is understood that the user who changes the contents of definitions files

in the Library will not necessarily be able to recompile the application to use the modified

definitions.)

b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is

one that (1) uses at run time a copy of the library already present on the user's computer system,

rather than copying library functions into the executable, and (2) will operate properly with a

modified version of the library, if the user installs one, as long as the modified version is

interface-compatible with the version that the work was made with.

c) Accompany the work with a written offer, valid for at least three years, to give the same user

the materials specified in Subsection 6a, above, for a charge no more than the cost of performing

this distribution.

d) If distribution of the work is made by offering access to copy from a designated place, offer

equivalent access to copy the above specified materials from the same place.

e) Verify that the user has already received a copy of these materials or that you have already sent

this user a copy.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

For an executable, the required form of the "work that uses the Library" must include any data

and utility programs needed for reproducing the executable from it. However, as a special

exception, the materials to be distributed need not include anything that is normally distributed

(in either source or binary form) with the major components (compiler, kernel, and so on) of the

operating system on which the executable runs, unless that component itself accompanies the

executable.

It may happen that this requirement contradicts the license restrictions of other proprietary

libraries that do not normally accompany the operating system. Such a contradiction means you

cannot use both them and the Library together in an executable that you distribute.

7. You may place library facilities that are a work based on the Library side-by-side in a single

library together with other library facilities not covered by this License, and distribute such a

combined library, provided that the separate distribution of the work based on the Library and of

the other library facilities is otherwise permitted, and provided that you do these two things:

a) Accompany the combined library with a copy of the same work based on the Library,

uncombined with any other library facilities. This must be distributed under the terms of the

Sections above.

b) Give prominent notice with the combined library of the fact that part of it is a work based on

the Library, and explaining where to find the accompanying uncombined form of the same work.

8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly

provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or

distribute the Library is void, and will automatically terminate your rights under this License.

However, parties who have received copies, or rights, from you under this License will not have

their licenses terminated so long as such parties remain in full compliance.

9. You are not required to accept this License, since you have not signed it. However, nothing

else grants you permission to modify or distribute the Library or its derivative works. These

actions are prohibited by law if you do not accept this License. Therefore, by modifying or

distributing the Library (or any work based on the Library), you indicate your acceptance of this

License to do so, and all its terms and conditions for copying, distributing or modifying the

Library or works based on it.

10. Each time you redistribute the Library (or any work based on the Library), the recipient

automatically receives a license from the original licensor to copy, distribute, link with or modify

the Library subject to these terms and conditions. You may not impose any further restrictions on

the recipients' exercise of the rights granted herein. You are not responsible for enforcing

compliance by third parties with this License.

11. If, as a consequence of a court judgment or allegation of patent infringement or for any other

reason (not limited to patent issues), conditions are imposed on you (whether by court order,

agreement or otherwise) that contradict the conditions of this License, they do not excuse you

from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your

obligations under this License and any other pertinent obligations, then as a consequence you

may not distribute the Library at all. For example, if a patent license would not permit royalty-

free redistribution of the Library by all those who receive copies directly or indirectly through

you, then the only way you could satisfy both it and this License would be to refrain entirely

from distribution of the Library.

If any portion of this section is held invalid or unenforceable under any particular circumstance,

the balance of the section is intended to apply, and the section as a whole is intended to apply in

other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right

claims or to contest validity of any such claims; this section has the sole purpose of protecting the

integrity of the free software distribution system which is implemented by public license

practices. Many people have made generous contributions to the wide range of software

distributed through that system in reliance on consistent application of that system; it is up to the

author/donor to decide if he or she is willing to distribute software through any other system and

a licensee cannot impose that choice. This section is intended to make thoroughly clear what is

believed to be a consequence of the rest of this License.

12. If the distribution and/or use of the Library is restricted in certain countries either by patents

or by copyrighted interfaces, the original copyright holder who places the Library under this

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

License may add an explicit geographical distribution limitation excluding those countries, so

that distribution is permitted only in or among countries not thus excluded. In such case, this

License incorporates the limitation as if written in the body of this License.

13. The Free Software Foundation may publish revised and/or new versions of the Lesser

General Public License from time to time. Such new versions will be similar in spirit to the

present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Library specifies a version number

of this License which applies to it and "any later version", you have the option of following the

terms and conditions either of that version or of any later version published by the Free Software

Foundation. If the Library does not specify a license version number, you may choose any

version ever published by the Free Software Foundation.

14. If you wish to incorporate parts of the Library into other free programs whose distribution

conditions are incompatible with these, write to the author to ask for permission. For software

which is copyrighted by the Free Software Foundation, write to the Free Software Foundation;

we sometimes make exceptions for this. Our decision will be guided by the two goals of

preserving the free status of all derivatives of our free software and of promoting the sharing and

reuse of software generally.

NO WARRANTY

15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO

WARRANTY FOR THE

LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN

OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER

PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS

WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF

ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN

WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY

MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE

TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE

LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING

RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A

FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF

SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Libraries

If you develop a new library, and you want it to be of the greatest possible use to the public, we

recommend making it free software that everyone can redistribute and change. You can do so by

permitting redistribution under these terms (or, alternatively, under the terms of the ordinary

General Public License).

To apply these terms, attach the following notices to the library. It is safest to attach them to the

start of each source file to most effectively convey the exclusion of warranty; and each file should

have at least the "copyright" line and a pointer to where the full notice is found.

one line to give the library's name and an idea of what it does.

This library is free software; you can redistribute it and/or modify it under the terms of the GNU

Lesser General Public License as published by the Free Software Foundation; either version 2.1

of the License, or (at your option) any later version.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;

without even the implied warranty of MERCHANTABILITY or FITNESS FOR A

PARTICULAR PURPOSE. See the GNU

Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this

library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,

Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and

paper mail.

You should also get your employer (if you work as a programmer) or your school, if any, to sign

a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for

tweaking knobs) written by James Random Hacker.

signature of Ty Coon, 1 April 1990

Ty Coon, President of Vice

That's all there is to it!

libjpeg-7

1. We don't promise that this software works. (But if you find any bugs,please let us know!)

2. You can use this software for whatever you want. You don't have to pay us.

3. You may not pretend that you wrote this software. If you use it in a program, you must

acknowledge somewhere in your documentation that you've used the IJG code.

In legalese:

The authors make NO WARRANTY or representation, either express or implied,with respect to

this software, its quality, accuracy, merchantability, or fitness for a particular purpose. This

software is provided "AS IS", and you, its user, assume the entire risk as to its quality and

except as specified below. Permission is hereby granted to use, copy, modify, and distribute this

software (or portions thereof) for any purpose, without fee, subject to these conditions:

(1) If any part of the source code for this software is distributed, then this README file must be

included, with

this copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the

original files must be clearly indicated in accompanying documentation.

(2) If only executable code is distributed, then the accompanying documentation must state that

"this software is based in part on the work of the Independent JPEG Group".

(3) Permission for use of this software is granted only if the user accepts full responsibility for

any undesirable consequences; the authors accept NO LIABILITY for damages of any kind.

These conditions apply to any software derived from or based on the IJG code, not just to the

unmodified library. If you use our work, you ought to acknowledge us. Permission is NOT

granted for the use of any IJG author's name or company name in advertising or publicity relating

to this software or products derived from it. This software may be referred to only as "the

Independent JPEG Group's software".

We specifically permit and encourage the use of this software as the basis of commercial

products, provided that all warranty or liability claims are assumed by the product vendor.

ansi2knr.c is included in this distribution by permission of L.

Peter Deutsch, sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA.

ansi2knr.c is NOT covered by the above copyright and conditions, but instead by the usual

distribution terms of the Free Software Foundation; principally,that you must include source code

if you redistribute it. (See the file ansi2knr.c for full details.) However, since ansi2knr.c is not

needed as part of any program generated from the IJG code, this does not limit you more than the

foregoing paragraphs do.

The Unix configuration script "configure" was produced with GNU Autoconf. It is copyright by

the Free Software Foundation but is freely distributable. The same holds for its supporting scripts

(config.guess, config.sub,ltconfig, ltmain.sh). Another support script, install-sh, is copyright by

X Consortium. but is also freely distributable.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

The IJG distribution formerly included code to read and write GIF files. To avoid entanglement

with the Unisys LZW patent, GIF reading support has been removed altogether, and the GIF

writer has been simplified to produce uncompressed GIFs. This technique does not use the LZW

algorithm; the resulting GIF files are larger than usual, but are readable by all standard GIF

decoders.

We are required to state that "The Graphics Interchange Format(c) is the Copyright property of

CompuServe Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated."

libpng

This copy of the libpng notices is provided for your convenience. In case of any discrepancy

between this copy and the notices in the file png.h that is included in the libpng distribution, the

latter shall prevail.

If you modify libpng you may insert additional notices immediately following this sentence.

This code is released under the libpng license.

libpng versions 1.2.6, August 15, 2004, through 1.5.7, December 15, 2011, are Copyright (c)

2004, 2006-2011 Glenn Randers-Pehrson, and are distributed according to the same disclaimer

and license as libpng-1.2.5 with the following individual added to the list of Contributing

Authors

Cosmin Truta

Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as

libpng-1.0.6 with the following individuals added to the list of Contributing Authors

Simon-Pierre Cadieux

Eric S. Raymond

Gilles Vollant

and with the following additions to the disclaimer:

There is no warranty against interference with your enjoyment of the library or against

infringement. There is no warranty that our efforts or the library will fulfill any of your particular

purposes or needs. This library is provided with all faults, and the entire risk of satisfactory

quality, performance, accuracy, and effort is with the user.

Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as

libpng-0.96, with the following individuals added to the list of Contributing Authors:

Tom Lane

Glenn Randers-Pehrson

Willem van Schaik

1997 Andreas Dilger Distributed according to the same disclaimer and license as

libpng-0.88, with the following individuals added to the list of Contributing Authors:

John Bowler

Kevin Bracey

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

Sam Bushell

Magnus Holmgren

Greg Roelofs

Tom Tanner

Eric Schalnat, Group 42, Inc.

For the purposes of this copyright and license, "Contributing Authors" is defined as the following

set of individuals:

Andreas Dilger

Dave Martindale

Guy Eric Schalnat

Paul Schmidt

Tim Wegner

The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc.

disclaim all warranties, expressed or implied, including, without limitation, the warranties of

merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc.

assume no liability for direct, indirect, incidental, special, exemplary, or consequential damages,

which may result from the use of the PNG Reference Library, even if advised of the possibility of

such damage.

Permission is hereby granted to use, copy, modify, and distribute this source code, or portions

hereof, for any purpose, without fee, subject to the following restrictions:

1. The origin of this source code must not be misrepresented.

2. Altered versions must be plainly marked as such and must not be misrepresented as being the

original source.

3. This Copyright notice may not be removed or altered from any source or altered source

distribution.

The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the

use of this source code as a component to supporting the PNG file format in commercial

products. If you use this source code in a product, acknowledgment is not required but would be

appreciated.

A "png_get_copyright" function is available, for convenient use in "about" boxes and the like:

printf("%s",png_get_copyright(NULL));

Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and

"pngbar.jpg (88x31) and "pngnow.png" (98x31).

Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification

mark of the Open Source Initiative.

Glenn Randers-Pehrson

glennrp at users.sourceforge.net

December 15, 2011

libxml(MIT License)

Open Source Initiative OSI - The MIT License (MIT):Licensing

The MIT License (MIT)

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and

associated documentation files (the "Software"), to deal in the Software without restriction,

including without limitation the rights to use, copy, modify, merge, publish, distribute,

sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is

furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or

substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER

DEALINGS IN THE SOFTWARE.

Lua

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and

associated documentation files (the "Software"), to deal in the Software without restriction,

including without limitation the rights to use, copy, modify, merge, publish, distribute,

sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is

furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or

substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER

DEALINGS IN THE SOFTWARE.

comments:

Permission is granted to copy, distribute and/or modify this document under the terms of the

GNU Free Documentation License, Version 1.1 or any later version published by the Free

Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-

Cover Texts. A copy of the license is included in the file COPYING.

name: ncurses

short-description: Displays and updates text on text-only terminals.

full-description: The ncurses (new curses) lib is a free software emulation of curses in System V

Release 4.0 and more. It uses terminfo format, supports pads and color and multiple highlights

and forms chracters and function-key mapping, and has all the other SYSV-curses enhancements

over BSD curses. It should port easily to any ANSI/POSIX-conforming UNIX-like system.

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

The distribution includes the lib and support utilities, including a terminfo compiler tic, a

decompiler infocmp, clear, tput, tset, and a termcap conversion tool captoinfo.

category: development

license: MIT

maintainer: TE Dickey <[email protected]>

interface: Library, command line

updated: 22 Oct 2000

keywords: development, command line, text mode, text

programs:

GNU: yes

web-page: http://dickey.his.com/ncurses/ncurses.html

support:

doc: User manual included

developers: Zeyd Ben-Halim <[email protected]>, Eric Raymond, Thomas Dickey

<[email protected]>,Jurgen Pfeifer <[email protected]>

contributors: Alexander V. Lukyanov <[email protected]>

sponsors:

source: ftp://ftp.gnu.org/pub/gnu/ncurses/ncurses-5.2.tar.gz

debian: http://www.debian.org/Packages/stable/base/ncurses-base.html

redhat: http://www.redhat.com/swr/alpha/ncurses-4.2-25.alpha.html

repository:

related: screen, lynx, termcap

source-language:

supported-languages: C, C++, Ada95

use-requirements:

build-prerequisites: awk, sed, make

weak-prerequisites: C++ compiler, Ada95 compiler

source-prerequisites:

version: 5.2 released 21 Oct 2000

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

announce-list:

announce-news:

help-list: [email protected]

help-news:

dev-list: [email protected]

dev-news:

bug-list: [email protected]

OpenSSL

LICENSE ISSUES

The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License

and the original SSLeay license apply to the toolkit. See below for the actual license texts.

Actually both licenses are BSD-style Open Source licenses. In case of any license issues related

to OpenSSL please contact [email protected].

OpenSSL License

Redistribution and use in source and binary forms, with or without modification, are permitted

provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions

and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of

conditions and the following disclaimer in the documentation and/or other materials provided

with the distribution.

3. All advertising materials mentioning features or use of this software must display the

following acknowledgment:

"This product includes software developed by the OpenSSL Project for use in the OpenSSL

Toolkit. (http://www.openssl.org/)"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or

promote products derived from this software without prior written permission. For written

permission, please contact [email protected].

5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear

in their names without prior written permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment:

"This product includes software developed by the OpenSSL Project for use in the OpenSSL

Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY

EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY

OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young ([email protected]). This

product includes software written by Tim Hudson ([email protected]).

Original SSLeay License

This package is an SSL implementation written by Eric Young ([email protected]).

The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions

are aheared to. The following conditions apply to all code found in this distribution, be it the

RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with

this distribution is covered by the same copyright terms except that the holder is Tim Hudson

([email protected]).

removed. If this package is used in a product, Eric Young should be given attribution as the

author of the parts of the library used. This can be in the form of a textual message at program

startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted

provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the

following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of

conditions and the following disclaimer in the documentation and/or other materials provided

with the distribution.

3. All advertising materials mentioning features or use of this software must display the

following acknowledgement:

"This product includes cryptographic software written by Eric Young ([email protected])"

The word 'cryptographic' can be left out if the rouines from the library being used are not

cryptographic related.

4. If you include any Windows specific code (or a derivative thereof) from the apps directory

(application code) you must include an acknowledgement:

"This product includes software written by Tim Hudson ([email protected])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE

LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT

OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR

BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code

cannot be changed. i.e. this code cannot simply be copied and put under another distribution

licence [including the GNU Public Licence.]

SQLite Copyright

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

All of the deliverable code in SQLite has been dedicated to the public domain by the authors. All

code authors, and representatives of the companies they work for, have signed affidavits

dedicating their contributions to the public domain and originals of those signed affidavits are

stored in a firesafe at the main offices of Hwaci. Anyone is free to copy, modify, publish, use,

compile, sell, or distribute the original SQLite code, either in source code form or as a compiled

binary, for any purpose, commercial or non-commercial, and by any means.

The previous paragraph applies to the deliverable code in SQLite - those parts of the SQLite

library that you actually bundle and ship with a larger application. Portions of the documentation

and some code used as part of the build process might fall under other licenses. The details here

are unclear. We do not worry about the licensing of the documentation and build code so much

because none of these things are part of the core deliverable SQLite library.

All of the deliverable code in SQLite has been written from scratch. No code has been taken from

other projects or from the open internet. Every line of code can be traced back to its original

author, and all of those authors have public domain dedications on file. So the SQLite code base

is clean and is uncontaminated with licensed code from other projects.

TinyXML

TinyXML is released under the zlib license:

This software is provided 'as-is', without any express or implied warranty. In no event will the

authors be held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial

applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the

original software. If you use this software in a product, an acknowledgment in the product

documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepresented as

being the original software.

3. This notice may not be removed or altered from any source distribution.

WPA Supplicant

This program is dual-licensed under both the GPL version 2 and BSD license. Either license may

be used at your option.

XML-RPC For C/C++ License

Redistribution and use in source and binary forms, with or without modification, are permitted

provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions

and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of

conditions and the following disclaimer in the documentation and/or other materials provided

with the distribution.

3. The name of the author may not be used to endorse or promote products derived from this

software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR

Download from Www.Somanuals.com. All Manuals Search And Download.

License Information

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY

OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

zlib License

zlib.h -- interface of the 'zlib' general purpose compression library version 1.2.2, October 3rd,

2004

This software is provided 'as-is', without any express or implied warranty. In no event will the

authors be held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial

applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the

original software. If you use this software in a product, an acknowledgment in the product

documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepresented as

being the original software.

3. This notice may not be removed or altered from any source distribution.

Jean-loup Gailly [email protected]

Mark Adler [email protected]

zziplib

The zziplib library is intentionally lightweight, it offers the ability to easily extract data from files

archived in a single zip file. Applications can bundle files into a single zip archive and access

them. The implementation is based only on the (free) subset of compression with the zlib

algorithm which is actually used by the zip/unzip tools.

The library allows reading zip archives in a number of ways,

archive mode:

reading the zip directory and extracting files from it. This is the traditional mode as seen with

unzip-utilities. Some extra unzip-utiles for transparent/magic mode are shipped as well.

replacement mode:

Use ZZIP_FILE / ZZIP_DIR pointers provided by zziplib and put them to work with routines

originally developped to work with real directories and file handles. The API calls do follow

traditional synopsis from posix/stdio.

transparent mode:

Use replacement handles and allow the open()-calls to automatically detect when a file is

contained in a zip archive or when it is a real file in the file system. A filepath can be partly in a

real filesystem and partly within the zip archive when one is seen.

ext magic

Use the same filepath to access either a zipped or real file - it looks for a real file and there is

none then every subdirectory of the path is checked, a ".zip" extension appended, and the zipped

file transparently opened. This can speed up dat-file development dramatically.

io/xor magic

The access to the filesystem can be hooked up - examples are given for xor obfuscation which is

great for game artwork and AI data. A small intro for SDLrwops usage is given as well.

Download from Www.Somanuals.com. All Manuals Search And Download.

TDK Network Card HHM Series HHM1763B2 User Manual
Teac Computer Drive HDU1000 KIT User Manual
Toshiba Cordless Telephone FT 8930 User Manual
Toshiba Marine Radio u300 User Manual
Toshiba Projector TDP SW20 User Manual
Toshiba Telephone DK8 User Manual
Trion Air Cleaner Cartridge Cleaning Systems User Manual
Vermont Casting Gas Grill VCS3507 User Manual
Vienna Acoustics Speaker Subson User Manual
Viper Automobile Alarm 550 ESP User Manual