Toshiba Answering Machine FT 8901 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
FEATURES  
Toshiba America Consumer Products Inc. takes pride in presenting the  
cordless telephone and digital answering system. An all digital  
answering device provides many new conveniences not available on  
tape machines, such as repeat, skip and individual message delete.  
900MHz analog transmission with  
extended talk range  
40 channel auto scanning  
All digital recording system  
(approx. 15min. recording time)  
TALK  
B
A
T
T
L
O
W
Advanced compandor noise  
reduction  
Advanced message management  
design  
Voice guidance/time stamp  
Long standby battery life (14 days)  
One way page/handset locator  
Last number redial (32 digits)  
10 speed-dial 16 digits each  
Mute on handset  
Any-key answer  
Reversible charging system  
Hearing aid compatible/HAC volume  
Desk/Wall mountable  
(bracket included)  
Custom greeting message /  
pre-recorded greeting message  
Memo recording  
Volume control (3 level)  
Digital security code (65,536 codes)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Preparation  
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . .6  
LOCATION OF CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Base unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Setting up the base unit (Desk top mounting) . . . . . . . . . . . . . . . . .10  
AC adaptor information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Setting up the base unit (Wall mounting) . . . . . . . . . . . . . . . . . . . . .11  
Charging the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Setting the dial mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Basics  
BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Out of range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Handset earpiece volume setting . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Handset ringer volume setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Base speaker volume setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Tone/Entering a pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Interference or static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Paging the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
MEMORY DIALING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Storing numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Inserting a pause in memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Dialing a stored number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Answering system  
USING THE MENU MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Recording the greeting message . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
To change the greeting message . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Setting the clook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Setting the security code (PIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Setting the base ringer volume . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Setting the number of rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Setting the recording time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
USING THE ANSWERING MACHINE . . . . . . . . . . . . . . . . . . . . . . . . .25  
Turning the answering machine ON & OFF . . . . . . . . . . . . . . . . . . .25  
Checking and switching greeting message . . . . . . . . . . . . . . . . . . .25  
Checking clock setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Playing recorded messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Deleting recorded message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Screening incomming calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Leaving a memo message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Recording a phone conversation (2WAY REC) . . . . . . . . . . . . . . . .28  
Calling in from a remote location . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Table of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
Additional information  
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
WARRANTY/SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
WALL MOUNT TEMPLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
REMOTE OPERATION CARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
When using your telephone equipment,  
basic safety precautions should always  
be followed to reduce the risk of fire,  
electric shock and injury.  
9 Never push objects of any kind into  
this product through cabinet slots as  
they may touch dangerous voltage  
points or short out parts that could  
result in a risk of fire or electric shock.  
Never spill liquid of any kind on the  
product.  
1 Read and understand all instructions.  
2 Follow all warnings and instructions  
marked on the product.  
10 Do not disassemble this product.  
Opening or removing covers puts you  
at risk of electrical shock, and incorrect  
reassembly can cause shocks, sparks  
or other damage during subsequent  
use.  
3 Unplug this product from the wall  
outlet before cleaning. Do not use  
liquid cleaners or aerosol cleaners.  
Use a dry cloth for cleaning.  
4 Do not use this product near water  
sources, such as bath tubs, wash  
bowls, kitchen sinks, laundry tubs, wet  
basements, or swimming pools.  
11 Take this product to a qualified service  
technician under any of the following  
conditions:  
5 Do not place this product on an  
unstable cart, stand, or table. The  
telephone may fall, causing serious  
damage to the telephone.  
A. When the power supply cord is  
damaged or frayed.  
B. If liquid has been spilled into the  
product.  
6 Slots and openings in the cabinet and  
the back or bottom are provided for  
ventilation. To protect it from  
C. If the product has been exposed to  
rain or water.  
D. If the product does not operate  
normally according to the operating  
instructions. Adjust only those  
controls covered by this manual.  
Improper adjustment of other  
controls may result in serious  
damage to the unit or your home.  
E. If the product has been dropped or  
the cabinet has been damaged.  
F. If the product exhibits a distinct  
change in performance.  
overheating, these openings must not  
be blocked or covered. The openings  
should never be blocked by placing  
the product on a bed, sofa, rug, or  
other similar surface. This product  
should never be placed near or over a  
radiator or heat register. This product  
should not be placed in a built-in  
installation unless proper ventilation is  
provided.  
7 Do not allow anything to rest on the  
power cord. Do not locate this product  
where the cord can be stepped on or  
tripped over.  
12 Do not use the telephone in the  
vicinity of a gas leak.  
8 Do not overload wall outlets and  
extension cords as this can result in  
the risk of fire or electric shock.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
The RBRCTM Seal  
The RBRCTM Seal on the (easily removable) nickel-cadmium battery  
(contained in our product) indicates that Toshiba America Consumer  
Products, Inc. (TACP) is voluntarily participating in an industry program  
to collect and recycle these batteries at the end of their useful lives,  
when taken out of service within the United States. The RBRCTM  
program provides a convenient alternative to placing used nickel-  
cadmium batteries into the trash or municipal waste, which is illegal in some areas.  
TACPs payments to RBRCTM make it easy for you to drop off the spent battery at  
local retailers of replacement nickel-cadmium batteries, or at authorized TACP product  
service centers. You may also contact your local recycling center for information on  
where to return the spent battery. Please call 1-800-8-BATTER for information on Ni-  
Cd battery recycling in your area. TACPs involvement in this program is part of its  
commitment to protecting our environment and conserving natural resources.  
RBRCTM is a trademark of Rechargeable Battery Recycling Corporation.  
CAUTION: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS BY THE  
BATTERY, READ AND FOLLOW THESE INSTRUCTIONS.  
4 Exercise care in handling the  
batteries. Contact with conductive  
materials such as rings, bracelets and  
BATTERIES  
keys may cause the battery to short  
out, resulting in overheating which  
could burn.  
1 Use only the appropriate type and  
size battery pack specified in the  
instruction manual provided for this  
5 Charge the battery pack provided with  
or identified for use with this product  
only in accordance with the  
product.  
2 Do not dispose of the battery pack in  
a fire. The cell may explode. Check  
with State and local codes for  
instructions and limitations specified  
in the instruction manual provided for  
this product.  
possible special disposal instructions.  
3 Do not open or mutilate the battery  
pack. Released electrolytes are  
corrosive and may cause damage to  
the eyes or skin. It may be toxic if  
swallowed.  
6 Observe proper polarity orientation  
between the battery pack and the  
battery charger.  
ATTENTION: THE PRODUCT THAT YOU HAVE PURCHASED CONTAINS A  
RECHARGEABLE BATTERY. UNDER VARIOUS STATE AND LOCAL LAWS, IT MAY  
BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE MUNICIPAL WASTE  
STREAM. PLEASE CHECK WITH YOUR LOCAL GOVERNMENT FOR DETAILS IN  
YOUR AREA REGARDING RECYCLING OPTIONS OR PROPER DISPOSAL.  
SAVE THESE INSTRUCTIONS  
TO HELP PROTECT THE ENVIRONMENT, THIS PRODUCT MAY CONTAIN  
RECYCLED OR RECONDITIONED PARTS AND MATERIALS.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATION OF CONTROLS  
HANDSET  
Antenna  
Speed Dial Index Card (back)  
Write down numbers stored in  
memory  
TALK/BATT LOW LED  
T
A
L
L
K
W
B
A
T
T
O
RDL/P  
(Redial/Pause) button  
(page 16, 17)  
FLASH  
T
ALK  
RDL/P  
TALK  
button (page 15)  
button (page 14, 16)  
FLASH  
1
4
ABC2  
JKL 5  
TUV 8  
OPER0  
DEF  
3
G
HI  
MNO  
6
P
R
Q
S
7
W
Y
X
Z
9
TO  
NE  
TONE  
/TONE MODE button  
#
M
EM  
#
/PULSE MODE button (page 14)  
(page 14, 17)  
MEM  
(page 18)  
MUTE  
VO  
L/R  
ING  
CH  
VOL/RING  
button (page 16)  
Battery Compartment (page 12)  
(Memory) button  
MUTE  
button (page 17)  
CH  
Charging Contacts  
(Channel) button (page 17)  
SUPPLIED ACCESSORIES:  
Modular Line Cord  
Part # RC008231  
Wall Mount Bracket  
Part # RC009245  
AC Adaptor  
TAC-8930  
Part # RC009255  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATION OF CONTROLS  
BASE UNIT  
DC IN 9v jack (page 10)  
LINE modular jack (page 10)  
PAGE  
button (page 17)  
Antenna  
ANSWER  
(page 25), ANSWER  
LED  
button  
POWER LED  
IN USE LED  
CHARGE LED  
Speaker  
MENU  
(page 20 to 24)  
button  
P
O
W
E
R
I
N
U
S
E
C
H
P
A
A
R
G
G
E
E
M
E
N
U
R
O
M
E
E
C
A
M
SET  
(page 20 to 24)  
/2  
W
button  
S
E
Y
T
REC MEMO/2WAY  
button (page 21, 28)  
S
E
L
E
C
T
W
E
R
V
O
L
U
G
M
VOLUME  
R
E
E
buttons (page 20 to26)  
E
T
IN  
G
S
E
F
F
L
E
C
T
M
IC  
T
IM  
SKIP FF  
SELECT  
E
button (page 26)  
/
TIME  
button (page 26)  
PLAY/STOP  
button (page 26)  
SELECT  
REW REPEAT  
button (page 20 to 26)  
/
DELETE  
button (page 26, 27)  
GREETING button (page 25)  
Microphone  
For purchase of accessories, please call 1-877-644-7373.  
Owner's manual  
Part # RC009793  
SPEED DIAL INDEX  
1
3
5
7
9
2
4
6
8
0
Quick Reference Guide  
Part # RC009794  
Speed Dial Index Card  
Part # RC005157  
Rechargeable Battery Pack  
Toshiba TRB-8000  
Part # RC004931  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
SETTING UP THE BASE UNIT (DESK TOP MOUNTING)  
For setting up the base unit follow the instructions below.  
Raise the  
antenna to a  
vertical position.  
Single-Line  
Telephone Jack  
(RJ11C)  
Fasten the AC adaptor  
cord to prevent it from  
being disconnected.  
Telephone Line Cord  
Power Outlet  
(AC 120V, 60Hz)  
AC Adaptor  
Plug the AC adaptor firmly into the base unit and the AC 120V outlet.  
USE ONLY WITH Supplied AC ADAPTOR (TAC-8930 power source  
AC 120V 60Hz/DC9V).  
The AC adapter must remain connected at all times.  
(It is normal for the adaptor to feel warm during use.)  
AC ADAPTOR INFORMATION  
Use only the supplied AC adaptor, or  
one matching its specifications exactly  
with this product. Incorrect voltage may  
damage the unit or cause it to function  
improperly.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
SETTING UP THE BASE UNIT (WALL MOUNTING)  
MOUNTING ON A STANDARD WALL PLATE:  
Insert the brackets tabs into the  
notches on the base.  
Flip the switch hook tab  
Raise the antenna.  
over so the tab holds the  
handset.  
Single-Line  
Telephone Jack  
(RJ11C)  
Telephone  
Line Cord  
Power Outlet  
(AC 120V, 60Hz)  
AC Adaptor  
Route the cords through the guides.  
Place the base unit on the posts of the wall plate and push down until it is  
firmly seated.  
USE ONLY WITH Supplied AC ADAPTOR (TAC-8930 power source AC  
120V, 60 Hz/DC 9V).  
NOTES:  
• Do not use any outlet controlled by a wall switch.  
• If you don’t have a standard wall plate, cut out the template on this page and  
use it to position two screws (minimum length of 13/8 inches) into the wall  
with the heads protruding about 1/4 inch.  
CUT  
CUT  
Wall mount template  
IMPORTANT:  
Before mounting, select a wall area of sufficient  
strength. If mounting on wallboard or in an area  
of questionable strength, locate  
maximum support of your telephone.  
a
stud for  
Avoid electrical cables, pipes, or other items  
behind the mounting location that could cause a  
hazard.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
CHARGING THE BATTERY PACK  
It is important to charge the battery for 12 to 16 hours  
continuously without any interruption before you use the handset  
for the first time.  
1
Remove the battery cover on the  
back of the handset by sliding it  
down.  
Red  
Black  
2
Plug the battery pack cord into the  
connector with the correct polarity.  
(black and red wires).  
3
4
Place the battery pack in the battery  
compartment.  
Put the battery cover back by  
sliding until it snaps into place.  
Make sure not to get the wires of  
the battery pack caught in the  
cover.  
TALK/BATT LOW  
LED  
T
ATT LOW  
B
A
L
K
5
Place the handset on the base unit.  
Be sure the CHARGE LED lights.  
POWER If the CHARGE LED does not light,  
LED  
make sure the AC adaptor is  
plugged in securely.  
CHARGE  
LED  
Charging contacts  
NOTES:  
Use only the supplied battery pack (TRB-8000 power source 600mAh, 3.6VDC)  
The battery pack is not charged properly if the charging contacts are dirty or  
tarnished. Clean the contacts occasionally with a dry cloth.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
After the battery pack is fully charged;  
Operation  
Approx. battery life  
up to 7 hours  
While in use (Talk mode)  
While not in use (Standby mode)  
up to 14 days  
When the TALK/BATT LOW LED blinks, all handset buttons are  
disabled and the battery needs to be charged. If this occurs during a  
call, you hear short beeps. Finish the call as soon as possible and  
place the handset on the base unit.  
NOTES:  
If a call comes in when the battery is too low to operate properly, you will be  
unable to answer the call or the call will be disconnected.  
The redial memory numbers backup for up to one minute while you replace  
the battery pack.  
If you must replace the battery pack during a telephone call, complete the  
replacement of the battery pack within 30 seconds, and you can return to the  
original call.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Before using the handset, make sure to read the following instructions.  
FLASH  
TONE/  
SETTING THE DIAL MODE  
Depending on your dialing system, set the mode as follows:  
1
2
Press and hold  
until you hear a confirmation tone.  
FLASH  
To set the dial mode for pulse dialing, press  
mode for tone dialing press TONE/  
A confirmation tone sounds to indicate the setting is complete.  
Or to set the dial  
.
.
Note:  
Most phone systems use tone dialing.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
Before using the handset, make sure to read the following instructions.  
RDL/P  
FLASH  
(Redial/Pause)  
TALK  
TONE/  
VOL/RING  
CH  
MUTE  
MAKING A CALL  
Handset On The Base  
Handset Off The Base  
TALK  
1) Pick up the handset.  
TALK  
1) Press  
.
2) Press  
.
2) Listen fot the dial tone.  
3) Dial the number.  
3) Listen for the dial tone.  
4) Dial the number.  
TALK  
To hang up: Press  
, or return the handset to the base (Auto Standby).  
RECIEVING A CALL  
Handset On The Base  
Handset Off The Base  
Pick up the handset (Auto Talk).  
Press any button (Any-key answer).  
TALK  
To hang up: Press  
, or return the handset to the base (Auto Standby).  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
REDIAL  
Handset On The Base  
Handset Off The Base  
TALK  
TALK  
1) Pick up the handset and press  
2) Listen for the dial tone.  
.
1) Press  
.
2) Listen for the dial tone.  
3) Press RDL/P .  
RDL/P  
3) Press  
.
OUT OF RANGE  
During a call, as you begin to move too far from the base unit, the  
noise increases. Then, you should move close to the base unit. If you  
travel out-of-range, your call terminates.(See page 17 Interference or  
static)  
CALL WAITING  
To use this feature, you must subscribe to the Call Waiting Service.  
1
2
When you hear a call-waiting tone during your conversation on the  
FLASH  
phone, simply press  
.
FLASH  
To return to the first caller, press  
again.  
NOTE:  
Pressing  
without receiving a Call Waiting signal may disconnect the  
FLASH  
current caller.  
HANDSET EARPIECE VOLUME SETTING  
VOL/RING  
To adjust the earpiece volume, press  
during a call.  
HANDSET RINGER VOLUME SETTING  
VOL/RING  
To adjust the ringer volume, press  
during standby mode.  
NOTE:  
When the handset is on the base, the handset ringer volume is disabled  
.
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
BASE SPEAKER VOLUME SETTING  
VOLUME/+  
VOLUME/–  
To adjust the base unit speaker volume, press  
while speaking.  
or  
MUTE  
MUTE  
To mute a conversation, press  
during a conversation.  
TALK  
MUTE  
To resume normal conversation, press  
or  
.
TONE/ENTERING A PAUSE  
To  
Do this  
TONE/  
To temporarily switch to tone dial  
Press  
. The following numbers  
(When the base is set to pulse mode)  
will be sent as tone dialing (See page 14).  
To enter a pause within the dialing  
sequence  
Press RDL/P (See page 19).  
INTERFERENCE OR STATIC  
CH  
If you hear noise during a call, press  
to select another channel.  
The TALK/BATT LOW LED blinks while changing a channel.  
PAGING THE HANDSET  
To locate the handset while it is off the  
PAGE  
base, press  
. The handset  
beeps for 60 seconds.  
PAGE  
To stop paging, press  
or any  
PAGE  
key at the handset, or return the  
handset to the base unit.  
NOTE:  
You cannot page the handset during a call.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMORY DIALING  
You can store up to 10 telephone numbers in the memory.  
NOTES:  
Always press a button within 20 seconds or the phone will return to standby.  
If you press a wrong button, an error tone sounds and the handset returns to  
standby mode.  
If you receive an incoming call or a pager call from the base unit during the  
operation, the operation will be cancelled.  
TALK  
(Redial/Pause)  
RDL/P  
MEM (Memory)  
STORING NUMBERS  
You can store up to 16 digits including #, , and PAUSE as a  
telephone number.  
MEM  
1
2
3
Pick up the handset and press  
.
Dial the telephone number you wish to store (up to 16 digits)  
MEM  
Press  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMORY DIALING  
4
Enter the memory address (0 to 9) at which you wish to store the  
phone number stored in step 3.  
You will hear a long beep when the number is successfully stored.  
To store more telephone number, repeat steps 1 to 4.  
5
6
Return the handset to the base unit.  
Record the telephone numbers on the SPEED DIAL INDEX CARD,  
and place it on the back of the handset.  
EXAMPLE: To store 9012345 in memory address 3  
MEM  
MEM  
0
1
2
3
4
5
3
9
Replacing a telephone number  
Just store the new number following the same steps in STORING  
NUMBERS.”  
The new number will replace the previously stored one.  
INSERTING A PAUSE IN MEMORY  
Use  
(redial/pause) to make an outgoing call through a PBX or  
RDL/P  
long distance. Each time you press RDL/P , a pause of about two  
seconds is inserted during the dialing sequence. If more than two  
seconds are needed, press  
twice.  
RDL/P  
EXAMPLE: To store 0 PAUSE 1234567890in memory address 4,  
press:  
MEM  
9
MEM  
0
1
2
3
4
5
6
7
8
0
4
RDL/P  
DIALING A STORED NUMBER  
TALK  
1
2
3
Pick up the handset and press  
Press the  
.
.
MEM  
Press the memory location number (0-9).  
The stored number will be dialed.  
NOTE:  
If you enter a memory address which does not have any stored number, error  
beeps sound.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE MENU MODE  
Menu mode allows you to setting following Answering System  
functions.  
REC MEMO/2WAY  
MENU  
SET  
VOLUME/+  
VOLUME/–  
SELECT  
SELECT  
REW REPEAT SELECT  
SKIP FF  
SELECT  
/
/
LED display  
PLAY/STOP  
TIME  
DELETE  
GREETING  
Menu No. Function  
LED display  
-- --  
Menu1  
Menu2  
Menu3  
Menu4  
Menu5  
Menu6  
Standby  
Greeting message  
Clock  
[
[
[
[
[
[
] - [ ], [ ], [  
] - [  
]
Security code (PIN)  
Ringer volume  
Ring time  
]
], [ ], [  
]
], [ ], [ ], [  
]
Recording time  
Return to standby  
], [ ], [  
] - [  
]
]
NOTES:  
If you make no entries within 20 seconds, or 20 seconds pass after a voice  
prompt/guidance or greeting, you will hear a long beep and the answering  
machine return to standby. Note that time out for clock setting is 2 minutes.  
Receiving a call or pressing talk will cancel setting. If you press PLAY/STOP ,  
the setting is canceled and return to standby.  
MENU  
You can scroll to the next menu option by pressing  
You can use or to adjust the  
.
VOLUME/+  
VOLUME/–  
announcement volume level during voice prompt/guidance.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE MENU MODE  
RECORDING THE GREETING MESSAGE  
You can record a personalized greeting message (up to 30 seconds)  
or use the pre-recorded message. When a call is received, the  
answering machine answers the call and plays the greeting message.  
MENU  
1
2
Press  
once.  
You hear the pre-recorded message or current greeting  
message.  
Press  
and you will hear the guidance.  
REC MEMO/2WAY  
Start to record your message.  
For example:  
I can not come to the phone right now. Please leave a  
message after the tone.  
3
To finish recording your message, press  
or  
REC MEMO/2WAY  
PLAY/STOP  
.
You hear a long beep and your greeting plays back.  
NOTE:  
You can delete your greeting message by pressing  
after step 1.  
DELETE  
TO CHANGE THE GREETING MESSAGE  
You can change between the pre-recorded greeting message and your  
own recorded greeting message.  
1
Press GREETING .  
The current greeting message will be played.  
2
3
Press  
Press  
or  
to change to the other.  
SELECT  
SELECT  
PLAY/STOP  
to exit the system.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE MENU MODE  
SETTING THE CLOCK  
The answering machine announces the day and time that each  
message was recorded during a play back.  
MENU  
1
2
Press  
twice.  
The system announces the current time.  
Press  
.
SET  
You hear the current day and the LED display shows the  
numbers [ ] through [ ].  
SELECT  
3
Press  
SELECT  
or  
until the correct day is  
announced.  
4
5
Press  
Press  
.
SET  
SELECT  
or  
SELECT  
until you hear the correct hour  
setting. The LED display shows the numbers [ ] through  
[
] as each hour is announced.  
6
7
Press  
Press  
.
SET  
SELECT  
or  
SELECT  
until you hear the correct  
minute setting. The LED display shows the numbers [  
through [ ] as each minute is announced.  
]
8
9
Press  
Press  
.
SET  
SELECT  
or  
SELECT  
until you hear AM or PM.  
The LED display shows [ ] or [ ].  
10  
Press  
.
SET  
The answering machine announces the time that you  
have set.  
NOTE:  
You can hear the time currently set by pressing  
TIME  
.
If you do not complete the setting procedure within 2 minutes, the setting  
precedure is cancelled.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE MENU MODE  
SETTING THE SECURITY CODE (PIN)  
To access to your answering machine when you are away from home,  
you need to identify yourself with a security code or Personal  
Identification Number (PIN). You can select any two digit number  
between 00 and 99 as your security code (PIN).  
MENU  
1
Press  
three times.  
You hear the current the current setting, and the LED display  
shows the current security code (PIN).  
2
3
4
Press  
to change the security code (PIN). The system  
SET  
announces current security code (PIN).  
SELECT  
or  
SELECT  
until the desired number  
Press  
appears.  
Press  
to set the security code (PIN).  
SET  
The answering machine announces new security code (PIN).  
SETTING THE BASE RINGER VOLUME  
Select one of three ringer volume setting (  
: High,  
: Low,  
: off).  
MENU  
1
Press  
four times.  
You hear the current ringer volume, and the LED display  
shows the ringer volume.  
SET  
2
3
Press  
Press  
.
SELECT  
SELECT  
or  
: High,  
until the desired ringer volume  
: Low, : off)  
appears.(  
SET  
4
Press  
to set the ringer volume.  
The system announces the ringer volume that you have set.  
NOTE:  
If the base ringer is set to off, and the handset is on the base, both the base  
and handset ringer is disabled.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING MENU MODE  
SETTING THE NUMBER OF RINGS  
Select one of four ring time setting ( : 2rings, : 4rings, :6rings,  
: Toll server).  
MENU  
1
Press  
five times.  
The current ring time is displayed on the LED display.  
2
3
Press  
Press  
to change the ring time.  
SET  
SELECT  
SELECT  
or  
or until the desired ring time  
appears. ( : 2rings, : 4rings, :6rings,  
: Toll Server)  
SET  
4
Press  
to set the new ring time.  
The answering machine announces the ring time that you  
have set.  
TS (TOLL SAVER MODE): The phone answers at the second ring  
when there are new messages, and the fourth ring when there are no  
new messages.  
When you check the message from the outside phone, hang up if you  
hear the third ring to save the toll charge.  
SETTING THE RECORDING TIME  
Select one of two maximum recording times or Announce Only ( : 1  
minute, : 4 minutes, : Announce only).  
MENU  
1
Press  
six times.  
The LED display shows the current recording time.  
2
3
Press SET to change the recording time.  
SELECT  
SELECT  
Press  
or  
until the desired time appears.  
(
: 1 minute, : 4 minutes, : Announce only).  
4
Press SET to set the new recording time.  
The system announces the recording time that you have set.  
A (Announce Only): If you set the recording time to A, the selected  
greeting message will be announced and no incoming message will be  
accepted. The LED display shows " ".  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE ANSWERING MACHINE  
VOLUME/+  
REW REPEAT SELECT  
VOLUME/–  
/
ANSWER  
LED display  
DELETE  
SKIP FF SELECT  
/
PLAY/STOP  
GREETING  
TIME  
TURNING THE ANSWERING MACHINE ON & OFF  
ANSWER  
Press  
to turn the answering machine on. The ANSWER LED  
will light, and the number of messages appears on the LED display. The  
greeting message will be played and you hear a long beep.  
ANSWER  
To turn off the answering machine, press  
off.  
. The LED display turns  
NOTE:  
If the message storage area is full, the LED display shows "  
" and the  
system announces "No remaining time" after the greeting message. You  
should delete messages (see page 27). Or, the system cannot record any  
message.  
CHECKING AND SWITCHING GREETING MESSAGE  
You can check the message and switch from the Pre-recorded  
message to the user greeting message.  
GREETING  
1
2
3
Press  
.
The current greeting message will be played.  
SELECT  
or  
SELECT  
to switch the greeting message, and  
Press  
the greeting message will be announced.  
PLAY/STOP  
Press  
to exit the system.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE ANSWERING MACHINE  
CHECKING CLOCK SETTING  
You can check the time (day, hour, minute, AM, and PM) by using the  
Time stamp.  
TIME  
To check the time, press  
. The time will be announced.  
PLAYING RECORDED MESSAGES  
The display shows the total number of recorded messages.  
If new messages have been recorded, the number blinks.  
To listen to the messages, press PLAY/STOP . Messages will be played  
in the order they were received. During playback, see the table below  
for more operation.  
PLAY/STOP  
To playback the message  
Press  
Press  
.
REW REPEAT  
To repeat the previous message  
(within 2 seconds  
after the beginning of message).  
REW REPEAT  
To repeat the current message  
Press  
(after 2 seconds  
after the beginning of message).  
SKIP FF  
To skip the message  
Press  
.
REW REPEAT  
To rewind the message in double  
speed.  
Press and hold  
.
SKIP FF  
To play back the message in  
double speed  
Press and hold  
.
DELETE  
To delete a message  
Press  
during playback of the  
message you want to delete.  
PLAY/STOP  
To stop playback  
Press  
.
To delete all messages  
Finish the playback of all messages.  
DELETE  
Then, press and hold  
beep sounds.  
till a  
To adjust the speaker volume  
(0-9)  
Press VOLUME/+ or VOLUME/–  
repeatedly.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE ANSWERING MACHINE  
DELETING RECORDED MESSAGES  
To delete all messages:  
Press and hold  
messages.  
DELETE  
till a beep sounds after playback of all  
If there are messages that you have not listened to, an errer tone  
sounds and the messages will not be deleted.  
To delete individual messages:  
While playing back the message you want to delete, press  
.
DELETE  
The message is deleted and the next message will be played.  
NOTE: To maintain maximum record time, it is a good idea to delete the old  
messages.  
SCREENING INCOMING CALLS  
You can screen calls when the answering machine is on.  
1
2
After the answering machine answers, the base speaker lets you  
hear the caller as the machine records the message.  
To answer the call immediately, simply pick up the handset or  
press  
if the handset is away from the base. The answering  
TALK  
machine will disconnect automatically.  
NOTE: If the speaker volume is set to 0, you can not use the screening calls feature.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE ANSWERING MACHINE  
LEAVING A MEMO MESSAGE  
You can use the base unit to record a memo (up to 10 minutes), as a  
reminder to yourself or as a message for someone else in the  
household. A memo is stored and played back like any other incoming  
message, and the LED display will blink to indicate that a message  
has been received.  
1
Press and hold  
till a beep sounds.  
REC MEMO/2WAY  
You hear Record your message after the toneand a long beep.  
2
3
Begin speaking close to the microphone.  
When you finish recording, press  
or PLAY/STOP .  
REC MEMO/2WAY  
RECORDING A PHONE CONVERSATION (2WAY REC)  
You can record a telephone conversation that is already in progress  
with the handset (up to 10 minutes). The conversation is stored and  
played back like an incoming message.  
1
2
During a call with the handset, press and hold  
beep sounds. Recording starts and both parties hear the  
intermittent beeps.  
till a  
REC MEMO/2WAY  
To stop recording, press  
You hear a long beep.  
or PLAY/STOP .  
REC MEMO/2WAY  
FLASH  
NOTE: When recording a conversation, all handset keys, except  
are  
disabled. Stop recording if you need to use any other handset keys.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE ANSWERING MACHINE  
CALLING IN FROM A REMOTE LOCATION  
You can retrieve messages or change answering machine settings by  
calling your phone from a touch-tone phone. Even if the answering  
machine has been left off, you can still access it by turning it on first.  
1
IF THE ANSWERING MACHINE IS OFF:  
Let the phone ring at least 10 times. The line will connect and you  
#
will hear several short beeps. Press  
code (PIN).  
and enter your security  
IF THE ANSWERING MACHINE IS ON:  
After playing your greeting message, press  
security code (PIN).  
#
and enter your  
2
3
The answering machine announces the number of new and old  
messages. The unit automatically starts playing the Help guidance.  
#
Press  
and the appropriate number button that corresponds to  
the operation you want (see TABLE OF COMMANDS on next  
page).  
#
5
4
When you have finished, press  
system.  
and  
or hang up to exit the  
NOTES:  
When entering your security code (PIN), the second digit must be entered  
within 2 seconds after the first one.  
If you enter a wrong security code (PIN) 3 times, the line will be  
disconnected.  
Enter the command within 15 seconds while you hear intermittent beeps.  
Otherwise, the line is disconnected.  
When you call your phone while the message storage area is full, you will  
#
hear several short beeps after the 10th ring. Enter  
(PIN), then you can continue to enter the commands.  
and your security code  
During a operation from a remote location, [  
], appears on the LED display.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE ANSWERING MACHINE  
TABLE OF COMMANDS  
OPERATION  
Press  
Remarks  
#
To repeat an incoming message;  
(during playback)  
1
Enter the command within 4  
seconds after the beginning of  
the message to repeat the  
previous message, and after 4  
seconds to repeat the current  
message.  
#
2
To playback an incoming message  
(up to 4 minutes)  
For longer playback,  
#
2
press  
at the end of  
the message.  
#
#
To skip to the next message  
(during playback)  
3
4
To delete individual messages  
(during playback)  
#
#
#
To stop operation  
5
6
7
To turn the answering system on  
To record a memo message  
(up to 4 minutes)  
After you finish recording a  
memo message, press  
#
#
#
7
#
5
#
7
To stop recording  
5 or  
or  
.
#
8
To record your greeting message  
After you finish recording your  
greeting message, press  
#
9
0
#
#
8
8
To stop recording  
5 or  
5 or  
.
#
#
To turn the answering system off  
To play Help Guidance  
For your handy reference guide, cut out the remote operation cards on  
page 35.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Should any problem occur with the unit, use the following simple tests to determine  
whether or not servicing is required.  
PROBLEM  
SOLUTION  
The handset battery  
pack does not charge.  
The charging contacts of the handset and base are not clean.  
Clean them with a dry cloth.  
The battery is not connected with correct polarity.  
Install the battery pack correctly.  
The battery is several years old.  
Replace with a new battery.  
Battery pack becomes  
low quickly.  
The battery was not fully charged at the initial charging.  
Charge the battery for 12 to 16 hours without any  
interruption.  
The battery is several years old.  
Replace with a new battery.  
Can not make or  
receive calls  
Can not hear dial tone.  
The AC adaptor of the base unit is disconnected.  
Plug the AC adaptor into the base unit and the AC 120V  
outlet.  
The battery is low.  
Place the handset on the base unit to recharge.  
Telephone line cord is disconnected.  
Check both ends of the telephone jack.  
The previous call was not disconnected.  
TALK  
Press  
to disconnect the line.  
Trouble with the telephone line.  
Check an extension line.  
Outlet used is controlled by a wall switch in its OFF position.  
Relocate it to another outlet.  
The handset is too far from the base unit.  
Bring the handset near the base unit.  
Dial setting needs to be changed  
FLASH  
Press and hold  
key then choose the appropriate  
setting.  
Low battery blinks on  
the display.  
The battery is low.  
Return the handset to the base.  
The handset does not  
ring or receive a page.  
The handset is located away from the base or the battery has  
been discharged.  
Return the handset to charge when finished your call.  
The digital security code is changed.  
Remove the handset from the base unit and press and  
PAGE  
hold  
. While the handset is emitting, return the  
handset to the base unit.  
The battery is low.  
Place the handset on the base unit to recharge.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
PROBLEM  
SOLUTION  
The handset does not  
ring when it is on the  
base.  
Ringer Volume setting is OFF position.  
Set the Ringe Volume to Hi or Lo  
The charging contacts of the handset and the base are not  
clean.  
Clean them with a dry cloth.  
The battery is several years old.  
Replace with a new battery.  
CHARGE LED will not  
light when the handset  
is placed on the base.  
The charging contacts of the handset and the base are not  
clean.  
Clean them with a dry cloth.  
The AC adaptor of the base unit is disconnected.  
Plug the AC adaptor firmly into the base unit and AC 120V  
outlet.  
The handset is not on the base.  
Place the handset on the base properly  
Noise or interference.  
The handset is too far from the base unit.  
Bring the handset near the base unit.  
The battery is low.  
Place the handset on the base unit to recharge.  
The base unit is located in a place with high interference.  
Relocate to another outlet.  
Interference from TV, Microwave oven, computer and  
electrical appliances.  
CH  
Press  
to select a clearer channel, or relocate the  
base unit.  
Excessive line noise.  
Check with another telephone.  
The volume control is set too high.  
Reduce volume to a lower setting.  
The base antenna is not in a vertical position.  
Lift the antenna to a vertical position.  
The phone needs to be reset.  
Disconnect the AC adaptor and reconnect it to within  
few seconds.  
The unit does not  
operate properly.  
When the handset is  
returned to the base  
unit with the volume  
level set at High, a  
momentary squeal or  
howling sound may  
sometimes be heard.  
This is normal.  
It may be prevented by changing the volume setting to  
Medium or Low before returning the handset to the base  
unit  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY/SERVICE  
PROBLEM  
SOLUTION  
The answering  
machine does not  
answer the call.  
The recording capacity is full.  
Delete the unnecessary message.  
Aanswering machine  
does not play.  
No message is recorded.  
This is normal.  
The messages are not  
recorded/incomplete.  
The message was too long or too short.  
The message should not be longer than the recording  
time (1 or 4 minutes), or shorter than 2 seconds.  
The recording capacity became full.  
Delete recorded messages.  
The phone was answered during recording.  
The recording time is set to A (announce only).  
Set the REC TIME to 1 or 4 minute setting.  
You are not calling from a touch tone phone.  
Call from a touch tone phone.  
The answering  
machine does not  
respond to remote  
operation.  
The security code (PIN) you entered was wrong.  
Make sure you entered the correct security code (PIN).  
If the answering machine is turned off, the phone will  
answer and the greeting message will be played after 10  
#
rings. After you hear several short beeps, enter  
your security code (PIN).  
and  
The LED display shows  
This is normal. The recording time is set to A (announce only).  
Set the REC TIME to 1 or 4 minute setting.  
"A" (Announce only)  
.
Can not delete  
messages.  
There is a message has not been played.  
Play the new message then delete message.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY/SERVICE  
SERVICE REQUIREMENTS  
If the cordless telephone should malfunction, or need changes or modifications, all  
repairs will be performed by an authorized Toshiba Service Station. This unit has been  
registered with the FCC for direct connection to the telephone network. Under the  
FCC program, no customer is authorized to repair this unit. This applies to units either  
in or out of warranty. If an unauthorized repair is performed, the registration of the unit  
for direct connection to the network will be null and void. If the unit is still in warranty,  
the remainder of the warranty period will also be null and void.  
It is the responsibility of users requiring service to report the need for service to the Toshiba  
dealer.  
IMPORTANT INSTRUCTIONS TO USERS  
Your telephone equipment has been designed and constructed to conform to federal  
regulations and can be connected to the phone line as described in this manual.  
Please note that each product connected to the telephone line places a certain load  
on the line. We designate this as the units Ringer Equivalence Number.”  
It is most unlikely, but...If your telephone equipment should cause problems on the  
phone line, the phone company has the right to temporarily discontinue your service. If  
this happens, the phone company will notify you and give you the opportunity to  
correct the problem. Also, you need to know that the phone company does have the  
right to make changes in their lines and/or equipment.  
If these changes might affect your telephone equipment (or require changes in the  
telephone equipment or its connection), the phone company will notify you in writing,  
so you have the chance to take whatever action necessary to ensure uninterrupted  
phone service.  
FCC REQUIREMENTS  
You are no longer required by the FCC to notify your local telephone company of your  
intent to connect a new telephone. Your local telephone company may call you and  
request information about your phone such as: the brand name, model number,  
registration number, and ringer equivalence number. This information is provided on a  
label located at the bottom of the base unit and handset.  
You may not directly connect your telephone equipment to coin telephone services.  
Check with your local telephone company if you wish to connect your telephone  
equipment to a party line service. Some party line services require a special adaptor  
or modification to your telephone.  
It should be noted that some cordless telephones operate at frequencies that may  
cause interference to nearby TVs and VCRs; to minimize or prevent such interference,  
the base of the cordless telephone should not be placed near or on top of a TV or  
VCR; and, if interference is experienced, moving the cordless telephone farther away  
from the TV or VCR will often reduce or eliminate the interference.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY/SERVICE  
TELEPHONE/TELEPHONE ANSWER MACHINE LIMITED WARRANTY  
Toshiba America Consumer Products.Inc(“TACP”) and Toshiba Hawaii,Inc.(“THI”) make the following  
limited warranties. These limited warranties extend to the original consumer purchaser or any person  
receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.  
(3) Within the continental U.S.A., if you should  
find a defective product within the warranty period  
please call 1-877-644-7373.  
Limited One(1) Year Warranty of Labor  
and parts  
TACP/THI warrant this product and its parts  
against defects in materials or workmanship for a  
period of one(1) year after the date of original retail  
purchase. During this period, TACP/THI will repair  
or replace your defective product with a new or  
refurbished unit at our option.  
(4) Warranties extend only to defects in materials or  
workmanship as limited above and do not extend to  
any product or parts which have been lost or  
discarded by you, or to damage to products or parts  
caused by misuse, accident, damage caused by Acts  
of God, such as lightning or fluctuations in electric  
power, improper installation, improper maintenance  
or use in violation of instructions furnished by us;  
or to units which have been altered or modified  
without authorization of TACP/THI, or to damage  
to products or parts thereof which have had the  
serial number removed, altered, defaced or  
rendered illegible.  
Owner’s Manual  
You should read the owner’s manual thoroughly  
before operating this product.  
Your Responsibility  
The above warranties are subject to the following  
conditions.  
(1) You must provide a copy of your bill of sale or  
other proof of purchase.  
(2) These warranties are effective only if the  
product is purchased and operated within the USA  
or Puerto Rico.  
(5) Physically damaged products are not acceptable  
for repair or exchange within or after the warranty  
period expires.  
How to Obtain Warranty Service  
In the event a problem should develop with your product, please proceed as follows;  
In The Continental United States contact: In Hawaii contact:  
Toshiba Hawaii, Inc.  
327 Kamakee Street,  
Honolulu, HI 96814  
(808)-591-8377  
All warranties implied by state law, including the implied warranties of merchantability and fitness for a  
particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the  
exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and  
in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller  
with respect to the repair or replacement of any parts. In no event shall TACP/THI be liable for  
consequential or incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of  
these warranties in any manner whatsoever. The time within which an action must be commenced to  
enforce any obligation of TACP/THI arising under the warranty or under any statute, or law of the United  
States or any state thereof, is hereby limited to ninety(90) days from the date you discover, or should have  
dicovered, the defect. This limitation does not apply to implied warranties arising under state law.  
This warranty gives you specific legal rights and you may also have other rights which may vary from state  
to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be  
brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may  
not apply to you.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE OPERATION CARDS  
CUT  
REMOTE OPERATION OF FT-8901  
during playback. To repeat, press #1  
during playback. To delete, press #4  
during playback.  
C To record memo message, press #7.  
To record greeting message, press  
#8. To stop recording, press #5. To  
turn on the answer mode, press #6.  
To turn off the answer mode, press  
#9.  
A Call your machine from touch tone  
phone. After your machine answers,  
enter # and security code (PIN)  
pressing each digit for at least 1  
second. If you enter # and PIN  
correctly, your machine sounds  
invitation tone after the  
announcement. Now enter the  
command (# and number) by pressing  
the keypad.  
D To stop operation, press #5.  
B To playback incoming and memo  
messages, press #2. To skip, press #3  
CORTE  
OPERACIONES POR CONTROL REMOTO FT-8901  
borrar presione #4 durante la  
A
Llame a su teléfono desde un teléfono  
de teclado. Después que su teléfono  
conteste, introduzca # y el código de  
seguridad (PIN) presionando cada  
dígito durante 1 segundo como  
mínimo. Si introduce correctamente #  
y el PIN, su teléfono emitirá un tono de  
invitación después del anuncio. Luego  
introduzca el mandato (# y un número)  
presionando las teclas.  
reproducción.  
C
Para grabar mensajes de memorando  
presione #7. Para grabar un mensaje  
de saludo presione #8. Para detener  
la grabación presione #5. Para  
activar o desactivar el modo de  
contestación presione #6. Para  
desactivar el modo de contestación  
presione #9.  
D
Para detener la operación presione  
#5.  
B
Para reproducir los mensajes recibidos  
y los memorandos presione #2. Para  
saltar presione #3 durante la  
reproducción. Para repetir presione  
#1 durante la reproducción. Para  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE OPERATION CARDS  
CUT  
#
WHILE PLAYING THE OGM, KEY-IN  
AND PIN  
MESSAGE  
MESSAGE REPEAT  
MESSAGE SKIP  
PLAYBACK  
(during  
1
2
3
#
#
#
playback)  
RECORD STOP/  
OPERATION STOP  
MESSAGE DELETE  
ANSWER ON  
(during  
6
#
4
5
#
#
playback)  
GREETING  
RECORD  
#
MEMO RECORD  
ANSWER OFF  
9
7
8
#
#
HELP GUIDANCE  
REMOTE ACCESS  
0
#
#
PIN  
CORTE  
DURANTE LA REPRODUCCIÓN DEL MENSAJE DE  
#
CONTESTACIÓN, PRESIONE  
Y PIN  
REPETICIÓN DE  
REPRODUCCIÓN  
SALTO DE MENSAJE  
MENSAJE  
DE MENSAJE  
(durante la  
1
2
3
#
#
#
reproducción)  
BORRADO DE  
MENSAJE  
ACTIVACIÓN DE  
DETENCIÓN DE  
CONTESTACIÓN  
GRABACIÓN/OPERACIÓN  
(durante la  
6
#
4
5
#
#
reproducción)  
DESACTIVACIÓN  
GRABACIÓN DE MENSAJE GRABACIÓN DE MENSAJE  
DE MEMORANDO  
DE CONTESTACIÓN  
DE CONTESTACIÓN  
9
7
8
#
#
#
ACCESO AL  
ASISTENCIA  
ANUNCIO  
CONTROL REMOTO  
0
#
#
PIN  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For technical assistance, purchase of accessories  
IMPORTANT  
We suggest you record the following information and retain for  
your records along with your bill of sale or equipment document.  
Model no.__________________ Serial no.______________  
Purchase date______________ Dealer_________________  
Dealer address _____________________________________  
2001 TOSHIBA AMERICA CONSUMER PRODUCTS, INC.  
©
UCZZ01315BZ  
RC009793  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teac Stereo System CD RW890 User Manual
Texas Instruments Calculator TI 10 User Manual
Timex Cyclometer W243 EU 193 095002 04 User Manual
Toshiba Network Router PA3227E 1ETC User Manual
Transition Networks Network Router SSEFE10XX 10X User Manual
Tricity Bendix Oven SB200 User Manual
TV Ears Car Satellite TV System 105102 User Manual
Universal Power Group Automobile Parts Consumer Battery Solutions User Manual
Vinotemp Refrigerator VINO2500 2500SSR User Manual
Vulcan Hart Electric Steamer ML 136058 User Manual