P220G Series Plastic Valves
Installation and Operating Instructions
Introduction
The P220G Series provides a full family of plastic valves are designed specifically to meet
the challenging needs of today’s golf course irrigation systems. Featuring precision pressure
regulation, the P220G Series valve delivers the optimum pressure and flow to every sprinkler
on the zone, ensuring maximum uniformity of the water to the turf.
The EZ-Reg pressure regulating system, a standard feature on all P220G valves, provides
consistant operating pressure. From low-pressure/flow applications of drip irrigation, to the
high-pressure/flow requirements of high-volume sprinklers, the EZ-Reg adjusts easily with
the micro-adjust dial and indicator, to provided constant downstream pressure 5–100 psi.
Also standard on the P220G series, is the heavy-duty SpikeGuard™ solenoid. Providing
20,000-volt lightning protection – the SpikeGuard solenoid has proven to minimize down
time and service costs, even in the severe lightning-prone regions.
Note: The P220G valve should be installed below grade in a valve box or vault to provide
service access and vandal resistance. The valve installation site should be readily accessi-
ble by grounds maintenance personnel and well clear of hardscape features, cart paths
and foot traffic areas.
Specifications
n Configuration:
n Manual Bleed:
z Globe/Angle
z Manual on/off control
z Glass-filled nylon and steel construction
z 1", 11⁄2", 2" and 3" NPT female thread models
z 24 VAC electric actuation
z Internal (downstream) bleed control (below solenoid)
relieves water internally
z External (atmospheric vent) bleed control (on flow control
handle) relieves water to atmosphere
z Pressure regulating
z 1" - 63⁄4" H x 33⁄8" W z 2" - 91⁄2" H x 61⁄8" W
z 11⁄2" - 71⁄4" H x 35⁄8" W z 3" - 103⁄4" H x 61⁄8" W
n SpikeGuard Solenoid:
z 24 VAC, 50/60 Hz
z Inrush - 0.12 amps
z Holding - 0.10 amps
n Flow Range:
z 1" - 5—60 GPM
z 11⁄2" - 30—120 GPM z 3" - 150—300 GPM
z 2" - 80—180 GPM
n DC-latching Solenoid (optional)
z For Golf Decoder Control (GDC) applications
n
Operating Pressure Range:
n Diaphragm:
z Inlet: 10—220 psi
z Double-beaded, fabric-reinforced
z Outlet: 5—100 ± 3 psi
z Inlet/outlet minimum pressure differential: 10 psi
z Burst pressure safety rating: 750 psi
n Filter Screen:
z Stainless steel, 120-mesh
z Self-flushing, contamination resistant and servicable
n EZReg Pressure Regulator:
n Manual Flow Reduction Control:
z Compact, precision-dial design
z Adjustable downstream flow reduction to zero flow (off)
z Regulates during automatic and manual operation
z Serviceable while valve is pressurized
z Schrader-type poppet valve enabling easy
verification of downstream pressure
n Friction Loss Chart
Flow (GPM)
5
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 180 200 225 250 275 300
Size – Config.
4.0 4.2 3.2 4.1 7.2
Angle 4.0 4.2 3.1 2.7 4.8
Globe
1"
Globe
1.6 2.3 3.6 5.2 7.0 9.2 11.7 14.4 17.5
1.3 1.6 2.8 4.0 5.5 7.1 9.0 11.0 13.3
1½"
2"
Angle
2.1 2.7 3.3 4.0 4.8 5.6 6.5 7.5 8.7
1.2 1.6 2.0 2.4 2.8 3.3 3.9 4.4 5.2
2.5 3.0 4.1 5.3 6.7 8.3 10.1
1.9 2.4 3.3 4.3 5.5 6.9 8.5
Globe
Angle
Globe
Angle
3"
Note:Friction loss values shownn in psi. Operating valve outside indicated flow range is not recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
|