TOPFIELD
The User’s Manual
Personal Video Recorder
TF4000PVR
- Personal Video Recorder
TF4000PVR CoCI
- Personal Video Recorder
- Embedded Conax
Please read this User s Manual carefully.
The menu structure and specification can be changed without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING Warning WARNING Warning WARNING
Please read the following recommended safety precautions carefully for your safety.
MAINS SUPPLY : 90-250V AC 50/60 Hz.
OVERLOADING : Do not overload wall outlets, extension cords or adapters
as these can result in fire or electrical shock.
LIQUIDS :
Keep liquids away from the PVR.
The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the apparatus.
SMALL OBJECTS : Coins or other small objects must be kept away from the PVR as
they can fall through the ventilation slots of the PVR and cause
serious damage.
CLEANING :
Disconnect the PVR from the wall socket before cleaning it.
Use a dry cloth lightly dampened(no solvents) to clean
the exterior of the PVR.
VENTILATION : Do not block the decoder’s ventilation slots.
Ensure that a free airflow is maintained around the PVR.
Never stand the PVR on soft furnishings or carpets.
Do not use or store the PVR where it is exposed to direct
sunlight or near a heater. Never stack other electronic
equipment on top of the PVR.
ATTACHMENTS : Do not use any attachments that are not recommended as these
may cause hazards or damage the equipment .
CONNECTION TO THE SATELLITE DISH LNB :
Disconnect the PVR from the mains before connecting or
disconnecting the cable from the satellite dish.
Failure to do so can damage the LNB.
SERVICING :
Do not attempt to service this product by yourself.
Refer all serving to qualified service agents.
LIGHTNING :
It is recommended that the PVR should remain connected at all
times to the mains supply and satellite dish (except when
working on the LNB). However, the manufacturer’s
instructions for safeguarding other equipment connected to the
PVR, i, e, TV set, must be followed during lightning storms.
LNB and the modem telephone line are essential.
EARTHING :
The LNB cable must be earthed to the system earth for
the satellite dish.
LOCATION :
Locate the PVR indoor place properly to prevent lightening,
raining and direct sunlight.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing the Personal Video Recorder (PVR).
This PVR is fully compliant with the international DVB standard and thus transmits digital
images, sounds, information guides and teletext directly to your TV through the satellite.
Now you can comfortably see and receive digitally transmitted music, news, movie and sports
satellite broadcasts in your office or at your home. The PVR records and playback satellite
broadcasts. You can enjoy interesting games embedded in PVR.
In the Channel Search section, both the automatic channel search method and the
manual search mode are provided. Also it supports DiSEqC 1.2, enabling you to move your
antenna in order to focus preferred satellite. You can save up to 3500 TV and 1500 Radio
channels and work around with the Favorite, Lock, Delete, Move and Sort functions.
The Menu is very modern and supports different languages. All functions can be carried out
using the remote control and some of the functions can also be carried out using the front panel.
The PVR is easy to use and adaptable for future advances. Please be aware that new
software may change the functions of the PVR.
If you have any difficulties concerning the operation of your PVR, please refer to the
relevant section of this manual, including the ‘Troubleshooting’. This Manual will provide you
with useful information on using the PVR.
CONTENTS
Please ensure that the following items are included with the PVR.
1) Remote control unit
2) Batteries (size AAA)
3) User’s Guide (this document)
FEATURES
Fully Compliant to DVB.
Common Interface for Viaccess,Irdeto,Cryptoworks,Nagravision,Conax and Mediaguard.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna/LNB control
- 22KHz mode On/Off
- 0/12V mode selection
- Automatic FEC Detection
- DiSEqC 1.0 & 1.2 compatible
Satellite/Channel support
- 3500 TV channels, 1500 Radio channels storable
Video/Audio
- Automatic PAL/NTSC selection
- Multi-lingual Audio support
- Automatic channel search
OSD (On Screen Display) support
- 256 color support.
- Multi-lingual menu text support.
- GMT and Time Offset support
- 10 favorite channel groups support
- Page Up/Page Down available on your channel list
- PIG ( Picture In Graphic ) support
Recording and playback
- Time shifting playback
- Recording by EPG
- Delayed Recording
- Fast and Slow Playback
- Bookmark
- Repeated Playback for selected interval
- Capable of editing recorded services
- About 12-25 hours recording capacity with a 40GB HDD
2 Tuners
- 2 Tuners for zapping while recording.
- 2 LNB inputs
- 2 RF signal loop through
- Independent LNB control
Teletext
- Software emulation mode with always VBI insertion mode on.
Embedded Conax ................................................................(Embedded Conax model only)
Games are embedded.
S/PDIF output (Digital Audio Output)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT / REAR PANELS
1) Front Panel
DISPLAY
During the STANDBY mode, the
LED
TV / SAT
current time is displayed.
REMOTE
When the power is on, the current status
is displayed (TV/ Radio/ Menu).
STANDBY
MENU
OK
CHANNEL
The channel buttons are to change channels.
VOLUME
POWER ON
The volume buttons are to change volume.
/STANDBY
2)Rear Panel
LNB 2 IN
Connects the satellite antenna cable.
RF IN
Connects the TV.
LNB 1 IN
Connects the satellite antenna cable.
RF OUT
Connects the TV RF IN (ANT IN).
0/12V OUTPUT
Chooses the LNB on the antenna.
RS232
AUDIO-RIGHT OUTPUT
Audio output.(RED)
Upgrades the PVR Program &
software
AUDIO-LEFT OUTPUT
Audio output.(WHITE)
S/PDIF
TV SCART
Optical output for Digital
LNB 1 OUT
Use it to connect to
Connects the TV SCART
Audio
another PVR or LNB 2 IN.
VCR SCART
Connects the VCR SCART
Video output (YELLOW)
LNB 2 OUT
VIDEO OUTPUT
Use it to connect to
another STB.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL UNIT (RCU)
MUTE Button (
)
Enables/ Disables the Audio.
POWER Button (
)
Switches the PVR between Operation and Standby mode.
MENU Button (MENU)
Displays the Menu on screen or returns to
previous menu from submenu.
EXIT Button (EXIT)
Returns to the previous menu and the screen.
GUIDE Button (GUIDE)
Displays the EPG (Electronic Program Guide)
on screen only when available.
V+/V- Buttons (V+/V-)
Adjusts the volume (Increase/Decrease).
P+/P- Buttons (P+/P-)
Tunes to the next or previous service.
Services up or down through the available services.
OK Button (OK)
Displays Channel List on screen.
Selects an item in the menu.
Numeric Buttons (0~9)
Selects the TV or Radio service channels
and individual menu options.
RECALL Button (
)
Selects the previously viewed channel.
INFO Button (
)
Displays the program information box on
the screen and removes it.
TV/ Radio Button (
)
Selects the TV/Radio mode.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TV/SAT Button (
Changes the terrestrial TV and Satellite mode.
)
SLEEP Button (
)
Displays sleep time. When sleep time,
the power automatically turns to the OFF
mode and the PVR to the STANDBY mode.
FAV Button (FAV)
Displays the favorite channel list.
Button
SOUND Button (
)
Display the progress bar of time shifting or
playback when no progress bar is displayed.
Fast rewind when the progress bar is displayed.
Selects LEFT/RIGHT/MONO/STEREO
sound function.
Button
SUBTITLE Button (
)
Playback with normal speed.
Selects the subtitle language list for the
current service.
Button
Pause
TELETEXT Button (
)
Enables the teletext with software
emulation
Button
Fast forward or fast motion playback.
Button
Button
Display recorded service list.
Slow motion playback.
Button
Button
Add or delete bookmark
Stop playback or recording.
Button
Button
Go to the previous bookmark
Start recording
Button
Button
Display the recording or playback status.
Starts instant playback if time shifting is enabled.
Select the period for repeated playback.
UHF Button (UHF)
Displays and alters the UHF setting in menu.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION (Connection)
First, connect both the satellite antenna and the TV line to the PVR and switch the
power on.
In this manual there are some of the most common ways to connect the equipment:
TV, VCR and PVR.
There are several ways of connecting the PVR to the existing Audio/TV system.
We recommend one of the following setups.
If you have problems with your connections and need help, contact your dealer or
service provider.
1. Connection to TV, VCR and Hi-Fi
1-1) Connection to the TV with the SCART Cable.
Connect one end of the SCART cable to the
TV SCART socket on the PVR and the other
end to a SCART socket on the TV.
1-2) Connection to the VCR with the SCART Cable.
Connect one end of the SCART cable to the
VCR SCART socket on the PVR and the other
end to a SCART socket on the VCR.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1-3) Connection to the TV with the CINCH Cable.
Connect one end (3 connectors) of the CINCH
cable to the AUDIO-RIGHT (red),
AUDIO-LEFT (white) and the VIDEO
output (yellow) socket on the PVR.
Connect the other end (3 connectors) to the
AUDIO-RIGHT (red), AUDIO-LEFT
(white) and the VIDEO input
(yellow) socket on the TV or Hi-Fi.
1-4) Connection to the TV using the RF cable.
Connect a terrestrial antenna to RF IN socket
on the PVR.
Connect one end of the RF cable to the RF
OUT socket on the PVR.
Connect the other end to the ANT IN socket
on the TV.
2.Connection to the Antenna.
We recommend one of the following installation diagrams because of the LNB
specifications for selecting RF signal band by DC voltage and 22Khz tone.
If the PVR is installed with separated connection type, there is no restriction for
zapping while recording.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2-1) Installing the PVR with two separated Antennas.
Installing the PVR with two separated Antennas.
The Connection Type in LNB setting menu
should be set to Separated.
2-2) Installing the PVR with one Antenna.
The Connection Type in LNB setting menu
should be set to Loop Through.
Tuner 1 and 2 can receive the RF signal of
the same polarity and the same band.
2-3) Installing the PVR with one dual LNB Antenna.
The Connection Type in LNB setting
menu should be set to Separated.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
2-4) Installing the PVR with two separated dual LNB
Antennas and DiSEqC switches.
The Connection Type in LNB setting
menu should be set to Separated.
3.Connection to the other Satellite Receiver.
Connect the satellite cable to the LNB IN socket
on the PVR. With other connector, connect the
LNB OUT socket on the PVR and the LNB IN
socket of the other PVR or STB.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Press the P o w e r
button to operate the PVR from the STANDBY mode. Now, the
button, the Info
Info Box will appear for a given time and disappear. By pressing the
Box will remain on the screen. The display time of the Info Box is adjustable under the
In s ta lla tio n menu of the Ma in menu.
If the current broadcast has EPG (Electronic Program Guide) with it, press the
button to see not only the current channel’s but also other channel’s EPG without
any time constraints. Also, press
button to reserve and save the current service
and to watch the broadcast automatically when it starts.
IMPORTANT: Before taking charge of your new PVR, some important technical
settings are essential.
- First, press the ME NU (
) button on the RCU to make the Ma in Menu appear.
- Go to the LNB S e ttin g menu under the C h a n n e l S e a rc h item of the
In s ta lla tio n menu and press
button.
- The default PIN CODE is 0 0 0 0.
- Choose the right parameters for Satellite Name, LNB Frequency, 22KHz, 12 V,
DiSEqC 1.0, and Motorized System according to your LNB and satellite settings.
If the right Satellite Name and LNB Frequency were not found in the list, call the
dealer for satellite information.
- Then, press the ME NU (
) button and go back to the C h a n n e l S e a rc h
menu.
- Set the S e a rc h Mo d e to the Au t o mode. (A Ma n u a l or Ad va n c e d S e a rc h
can always be performed later on)
- Select the S ta rt S e a rc h ... item and press
button.
- The search procedure will take a while. Press
button when the searching
process is over (100%) to confirm and save the new channel list.
- For further information, please refer to the LNB S e ttin g item of the MENU
OPERATIONS on this manual.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Guide
Information Box
Press
button on the RCU to see the program
information. The Information box displays as follows:
. Channel Number
. Channel Name
. Detailed Program Information
. Signal Level & Quality
. Satellite Information
. Information of subtitle and / or teletext
By using
mode, press
,
buttons, you can see the EPG of next event. To change volume level in this
buttons without no interval.
,
Press
button once more, you can see the extended infomation of the current program.
button once more.
To remove info box, press
EPG (Electronic Program Guide)
To use currently showing TV, and Radio services
as well as to use next program schedules,
press
button on the remote control unit.
If EPG is available on programs, you will see
the detailed description of the programs, start/end
time and programs schedules etc.
,
and
,
buttons will be used to move program and
to see next program schedules. The
button makes the reservation for the next program.
button shows extended information of the current program.
button will change the contents of EPG between TV and Radio services.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Subtitle
You can choose a language of subtitle using
on the RCU.
button
If a broadcaster provides subtitles, you can see
symbol in the Information Box.
Teletext
If a broadcaster supports teletext, you can see
symbol in the Information Box.
There are VBI insertion mode and software emulation mode in teletext.
In the VBI insertion mode, which is always on, you can watch the teletext with your TV
using the RCU of your TV. To watch teletext with VBI insertion, your TV must support
teletext.
In the software emulation mode, you can watch the teletext even though your TV does
not support teletext. You can watch the teletext using the RCU of PVR.
Press T e le t e x t (
Press Te le te xt (
) button to watch the teletext with software emulation mode.
) button or E XIT( ) button to escape from teletext.
Soundtrack
You can choose a language of soundtrack using
button on the RCU when a broadcaster supports
various languages of soundtrack.
Also, it is possible to choose a mode among S te re o,
Mo n o, Le ft and R ig h t using the
,
buttons
on the RCU.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATIONS
Now this chapter assumes that the PVR system has been installed correctly,
meaning:
* The satellite dish for the PVR has been installed, connected to the PVR and
correctly adjusted to the proper satellite.
* The PVR is connected to the TV.
* The RCU has batteries and ready to control the PVR.
If the PVR has not been installed or connected properly, please refer to the
INS TALLATIO N (connection) menu on this manual.
Many of the functions of the PVR are available from the Ma in Menu. Press the
button to open it.
The Conax Conditional Access menu is valid for Embedded Conax model only.
This menu allows you to view the information on the Smart Card and Conax
Conditional Access System. ............................( Embedded Conax model only)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
I. SYSTEM SETTING
I-1 TIME SETTING
Various time modes can be set, such as the current local time, the Power
On/Off time and the Sleep Time. The exact local present time can be adjusted
by using the G MT, the Tim e O ffs e t and the Mo d e sub menus.
PLEASE NOTE: Configure the Lo c a l Tim e before adjusting the Wa ke u p
T im e,P o we r O ff Tim e or the S le e p Tim e.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
A. Local Time Setting
Press
button at Lo c a l Tim e S e ttin g item in the Tim e S e ttin g menu to open the
Lo c a l Tim e S e ttin g menu. Inside the Lo c a l Tim e S e ttin g menu, there are 4 sub
menus: Mo d e, Lo c a l Tim e, G MT and Tim e O ffs e t.
Mode
By using the
,
buttons,you can control the Au to /Ma n u a l mode. The Au t o
mode automatically updates the time settings by adding the GMT received from the
satellite and the Tim e O ffs e t value you have inserted. The Au t o mode is recommended.
Local Time
The Lo c a l Tim e is adjustable only when the Mo d e is on the Ma n u a l mode.
Adjust the current time, if necessary, by using the numeric buttons and the
buttons.
,
GMT
GMT is referred to the standard time of Greenwich. This cannot be changed.
Time Offset
The current time of the local area can be inserted. In another words, insert the
time difference of the local time zone from the GMT. For example, if the local area is
Seoul (the time difference from the GMT being 9), insert 9 :0 0. The time is
adjustable by using the
,
buttons,15 minutes at a time.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
B. Timer
Use the
,
buttons to select the On/Off mode. If the T im e r item
is set to O n, the Wa ke u p Tim e item, the Wa ke u p C h a n n e l item and the
P o we r O ff Tim e item becomes adjustable.
C. Wakeup Time
The Wa ke u p Tim e item sets up the time the PVR automatically turns
on. Insert the preferable Wa ke u p Tim e by using the numeric buttons and the
,
buttons on the RCU. To disable the wakeup funtion, make the T im e r
item O ff.
D. Wakeup Channel
The Wa ke u p C h a n n e l item automatically turns the PVR to the preset
channel when it automatically turns on by the Wa ke u p function.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
E. Power Off Time
The P o we r O ff Tim e menu sets the time of the PVR automatically turns off.
F. Sleep Time
The S le e p Tim e item is similar to the P o we r O ff menu. The S le e p
T im e function turns off after the adjusted sleep time.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
I-2. PARENTAL CONTROL
The age rating control, the PIN(Personal Identification Number) Code and the
passwords to various menus can be configured. The PIN Code box will
automatically appear when this menu is selected. The default PIN Code is 0 0 0 0.
A. Censorship
The C e n s o rs h ip item blocks programs according to each specific setting.
Use the
,
buttons to select the items below.
No Blo c k: Access to everyone.
4 ~1 8 (a g e ): Inaccessible for viewers within each minimum age limit.
To ta l Blo c k: Access to no one.
If the channel is limitation free, the block function will not work.
B. Change PIN Code
Go to the P IN C o d e item to configure new PIN Code. Press
button, and a
box will appear on the screen. Enter the PIN code by using the numeric buttons on your
RCU.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
C. Access Control
The Ac c e s s C o n tro l menu controls access to 6 items: Tim e S e ttin g,
La n g u a g e S e ttin g, A/V O u tp u t S e ttin g, O rg a n iz in g C h a n n e ls,
O rg a n iz in g F a vo rite s and In s ta lla tio n. Press the buttons to
,
Lo c k/U n lo c k the access. Lo c kin g means controlling the access to specific
menus with the PIN Code system. The default PIN Code is 0 0 0 0.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
I-3. LANGUAGE SETTING
There are many languages available for the menu. The default language is
English.
A. Menu Language
It is an item for changing the language of the Ma in menu.
Select the language which the menus will be shown in.
[English / French / German / Italian / Spanish / Arabic / Greek / Turkish /
Danish / Swedish / Norwegian]
B. Subtitle Language
It is an item for changing the language of the subtitle.
As long as the services support, the subtitle language is changeable by
pressing
button on your RCU.
[English / French / German / Italian / Spanish / Arabic / Greek / Turkish /
Danish / Swedish / Norwegian]
24
Download from Www.Somanuals.com. All Manuals Search And Download.
C. Audio Language
It is an item for changing the language of the Audio.
The first audio language is set to English. If more than one audio language is
transmitted, you may select one language among several languages transmitted
by pressing
button.
[English / French / German / Italian / Spanish / Arabic / Greek / Turkish /
Danish / Swedish / Norwegian]
I-4. A/V OUTPUT SETTING
The PVR has many A/V Outputs. Control this menu properly according to external
components connected to the PVR. Configurations concerning Audio and Video can be
made here.
A. TV Type
Enables the setting of the TV standard. For automatic PAL/NTSC selection, set to
Mu lt i.
B. TV Aspect Ratio
Enables the setting of the screen format of the TV. Select 4 :3 or 1 6 :9 mode by
using
,
buttons.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
C. Display Format
Enables the setting of the screen format of the TV. Select the Le tte r Bo x
or C e n te r e xtra c t mode of 16:9 pictures by using
,
buttons.
D. Sound Mode
Allows you to configure the sound mode. Select the S te re o, Mo n o, Le ft and
R ig h t modes by using the buttons. The Sound mode is configurable later
on by using the button on your RCU.
,
E. UHF Type
Allows you to change the UHF Type. Select the P AL G, P AL I, P AL K modes
by using the
,
buttons.
F. UHF Channel
Choose the UHF Channel by using the
is CH36.
,
buttons. The default UHF channel
I-5. OSD Transparency
Adjusts the OSD transparency level of all kinds of menus. The available levels
are ranging from 0% to 50%.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
I-6. Info Box Display Time
Adjusts the time-out of the Info Box. Sets the period of time the Info Box is displayed on screen.
The adjustable time is from 0 to 30 seconds.
I-7. Info Box Position
Adjusts the position of the Info Box. Allows you to change the position by using the
,
buttons.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
II. ORGANIZING CHANNELS
This mode can be used to rename, reorder, lock, hide and delete TV Services.
A. Browse
Press
button. Now, browsing through the O rg a n iz in g C h a n n e ls is possible.
Press assigned buttons on the help message.
B. Rename
Use
,
buttons to select R e n a m e item and press the
button to move
the cursor to the Channel List. Press
button to display keyboard, and rename
the channel. After renaming it, be sure to save it by pressing the
item.
button at S a ve
C. Move
You can reorder and move the service to the preferred position. Mark the desired channel
to move and press
button. Use
,
buttons to choose the Mo ve mode.
D. Lock
You can restrain and lock the services. From here, locking (and later unlocking)
channels in any of the lists is possible e.g. in order to prevent children from watching
it. If a locked service is selected, enter the PIN code in order to enjoy it.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
E. Skip
You can hide and skip the services. In order to unlock the skip function,
press button
on the skipped channel. The skipped channels will not be visible on channel list.
F. Delete
Press
button to delete channels. The delete function differs from the skip
function as it deletes the channel completely. Whereas, the skip function just makes
the channel invisible.
NOTE: Deleted channels are permanently deleted. The only way to reobtain
is to perform a new channel search.
G. Sort
You can sort and rearrange the sequence for the services.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
III. ORGANIZING FAVORITES
This mode is helpful in adding and deleting services to and from the favorite
group.
Under the menu O rg a n iz in g F a vo rite s, there are three different modes:
F a v Lis t , F a v C Hs and C h Lis t. On the F a v Lis t mode, four standard lists are
selected as the default menus: N e w s, S p o rts, Mo vie and Mu s ic. Up to 10 lists
including these lists can be added and renamed.
When deleting a service, select a service in the F a v C Hs section and press the
assigned button on the help message.
To add services into Favorites, locate the cursor to the desired service and press
button.
Even in the Favorite CHs, you will see basic satellite & Channel information.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
IV. Recording
This menu shows some options for recording.
IV-1. Satellite
Press
button to display the satellite list. Select a satellite that includes the channel to
be recorded.
IV-2. Channel
Press
button to display the channel list. Select a channel to be recorded.
IV-3 Mode
There are two recording modes.
To record the selected service immediately, select the Q u ic k mode.
To record current event including the data of the time shifting buffer, select C u rre n t E ve n t
mode. The C u rre n t E ve n t mode is valid only when the event information of the channel
exists.
IV-4. Duration
To change the duration of the recording time, press
or
button.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
IV-5. File Name
To change the file name of the service to be recorded, press
button at this item.
IV-6. Start
To start recording, press
button at this item.
button at this item.
IV-7. Stop
To stop recording, press
IV-8. Delayed Recording
In this menu you can reserve delayed recording.
A. Satellite
Press
button to display the satellite list. Select a satellite that includes the
channel to be recorded.
B. Channel
Press
button to display the channel list. Select a channel to be recorded.
C. Mode
There are 3 or 4 different modes.
Select O n e Tim e to record the channel only once.
Select E ve ry Da y to record the same channel at the same time of every day.
Select We e kly to record the same channel at the same time on the same weekday.
Select E ve ry We e ke n d to record the same channel at the same time on every
weekend. This menu is enabled when the Da te menu is set to Saturday or Sunday.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
D. Date
To change the recording start date, press or button.
E. Start Time
To change the recording start time, press or button or enter the time using the
numeric buttons
F. Duration
To change the recording duration, press or button.
G. OK
To confirm the setting for the delayed recording, press
button.
Be sure to confirm it if you want to register the current setting for delayed recording.
IV-9 Edit Reservation
In this menu you can check, edit and cancel the delayed recordings.
A. List
Press
button to display the reserved list. Select one of the reserved items.
B. Channel
This item displays the channel name to be recorded.
C. Date
This item displays the recording start date.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
D. Mode
There are 3 or 4 different modes.
Select O n e Tim e to record the channel only once.
Select E ve ry Da y to record the same channel at the same time of every day.
Select We e kly to record the same channel at the same time on the same weekday.
Select E ve ry We e ke n d to record the same channel at the same time on every
weekend. This menu is enabled when the Da te menu is set to Saturday or Sunday.
E. Start Time
This item displays the recording start time.
F. Duration
This item displays the recording duration.
G. Save
This item enables you to save the reservation.
H. Cancel
To delete the registration of the selected delayed recording, press
button at this item.
I. Recording
To go to the Recording menu, press
button at this item.
V. HDD Service
You can use this menu to manage the HDD and the functions related to the HDD
34
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1. Delayed Recording
Refer to IV-8. Delayed Recording.
V-2. Edit Reservation
Refer to IV-9. Edit Reservation.
V-3. Format Hard Disk
To format the HDD in PVR, press
button at this item.
F o rm a t Ha rd Dis k will delete all the data and the files in HDD permanently.
If a new HDD is installed, it should be formatted by this PVR. The file structure of the
PVR is different from that of PC.
You cannot use the Time shifting, Recording and Playback functions with an
unformatted HDD.
V-4. Time Shifting
To enable time shifting function, select E n a b le.
If the Tim e S h iftin g is enabled, this PVR records the current channel in normal play.
And, you can take advantage of the time shifting function.
To disable time shifting function, select Dis a b le. If you don’t want to use time shifting
function, disable the time shifting to reduce the power consumption.
VI. INSTALLATION
35
Download from Www.Somanuals.com. All Manuals Search And Download.
VI-1. LNB Setting
The Low Noise Blockdown Converter (LNB) amplifies the signal received by
the satellite dish and lowers the frequency of the signal. The signal is then fed from
the LNB at the dish via cable to the PVR.
For the LNB Settings, move the cursor to In s ta lla tio n item and press
button.
Then, move the cursor to the LNB S e ttin g item and press
button.
A. Satellite Name
Press the
button to display the Satellite List. The Satellite name list is put in
alphabetical order. Select one of the preprogrammed satellites that correspond to the
value of the antenna. If the desired satellite name is not in the list, then select O th e rs.
B. Tuner Select
Select a tuner for channel searching from the selected satellite.
C. Connection Type
If two tuners share one LNB as the diagram 2-2) on page 12, select Lo o p Th ro u g h.
If a service is being recoded, the other tuner can receive only the signal of the same band
and polarity as being recorded in this configuration.
If the tuners are connected to separated LNBs (or Dual LNB), select S e p a ra te d.
There is no restriction as in the Lo o p Th ro u g h configuration.
D. LNB Frequency
Select the L.O. Frequency set to antenna. The LNB Frequency of 5150, 9750,
10600, 10750, 11475 MHz or Universal can be selected by using the
or
button.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: If the Universal LNB is selected, both 9750 and 10600 MHz are
supported at the same time, and therefore the 22 KHz tone setting
is not required.
E. LNB Power
Select LNB power ‘ On’ for internal and ‘ Off ’ for external.
F. 22 KHz
If you are using a 22 KHz tone switch box, make 22 KHz tone switch enable or disable
to select LNB or antenna.
G. 12V
Use it if the switch box is controlled by 12V DC.
H. DiSEqC 1.0
The PVR is designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be
connected to the PVR at the same time. If you are using two or more fixed antennas or
LNBs, then it is recommended to use a DiSEqC 1.0 switch.
Select from 1 of DiS EqC to 4 of DiS EqC, Min i A, Min i B or Dis a b le
according to the option or the configuration of DiSEqC switch box or antenna.
I. Channel Search
To go to C h a n n e l S e a rc h menu directly from LNB S e ttin g menu, press
button at this item.
VI-2. Channel Search
37
Download from Www.Somanuals.com. All Manuals Search And Download.
A. Satellite Name
Press the
button to display the Satellite List Box. The Satellite name list is put in
alphabetical order. Select one of the preprogrammed satellites that correspond to the value
of the antenna. If the desired satellite name is not in the list, then select O th e rs.
B. Search Mode
There are 4 search modes, Au t o, Ma n u a l, Ad va n c e d and S MATV. The Au t o
mode enables to search using the information the PVR has. On the other hand, there
will be a need to know in advance the frequencies and the symbol rates before using the
Ma n u a l mode. On the Ad va n c e d mode, enter the Audio PID, Video PID or the PCR
PID. The S MATV mode is used to special purposes on satellite master antenna TV
system.
C. Frequency
Enter the Transponder’s Frequency by using the numeric buttons on your RCU.
D. Symbol Rate
Enter the Transponder’s Symbol Rate by using the numeric buttons on your RCU.
E. Polarization
Choose the type of polarization, either the Ho riz o n ta l or the Ve rtic a l.
F. Network Search
This Ne two rk S e a rc h item can be used if the S e a rc h m o d e is set to the
Ma n u a l or Au t o mode. If the Ne two rk S e a rc h item is set to O n and the NIT
(Network Information Table) is available, the Transponder’s information can be found.
G. PID
Press
button to enter Video,Audio and PCR PID’s.
1) Video PID
Insert the Video PID by using the numeric buttons on your RCU.
2) Audio PID
Insert the Audio PID by using the numeric buttons on your RCU.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
3) PCR PID
Insert the PCR PID by using the numeric buttons on your RCU.
4) SAVE
To ensure the above Video,Audio and PCR PID change, press
button at this item.
H. FTA/ Scrambled
Choose your favorable channels among F TA o n ly, C AS o n ly and F TA+C AS.
I. Tuner Select
Select a tuner for channel searching from the selected satellite.
J. Start Search...
Searches for digital channels after the configuration of the LNB is over. To stop the
searching process on the way, press either the button or the button.
This menu will be shown as long as the PVR is searching for channels. All channels
found will be listed in two columns on the screen; with TV channels in one column and
Radio channels in the other. Please note that the search procedure may take a few minutes.
When the search procedure is completed, the screen will show how many TV and Radio
channels have been found. Press
button to save the channels.
K. LNB Setting
To go to LNB S e ttin g menu directly from C h a n n e l S e a rc h menu, press
button at this item.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
VI-3 . Service Copy
This item enables you to copy the service list of one tuner to that of the other.
A. Tuner 1 to Tuner 2
Copy the service list of Tuner 1 to that of Tuner 2.
B. Tuner 2 to Tuner 1
Copy the service list of Tuner 2 to that of Tuner 1.
C. All
Add the service list of Tuner 1 and Tuner 2 and save it to that of Tuner 1 and Tuner 2.
VI-4 . Motorized DiSEqC 1.2
If you have DiSEqC 1.2 motorized system, then you can use the DiSEqC 1.2 functions.
. Satellite Name
A selection of satellite names that will be used to identify a motor position.
. Tuner Select: Select a tuner for channel searching from the selected satellite.
. Frequency: Selects the frequency to catch the strong signal.
. DiSEqC Command Mode : Change the current mode between Us e r and In s ta lle r
modes.
-Us e r: This mode is used to fine-tune the position of the motor for better reception.
-In s ta lle r: This mode is used to search for the position of a satellite manually.
. Movement: In case of Us e r mode, the movement is adjustable by fine-tuning.
In case of In s ta lle r mode, the movement is adjustable by E a s t , We s t going
command.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
. Motor Control
- G o to : Moves the motor to the stored position of the selected satellite.
- S to re : Stores the current position of the motor for the selected satellite.
- R e s e t : Resets all stored position of the motor relative to the “0” position (In s ta lle r
mode only).
- R e c a lc u la te : Recalculates the position of the Stab Rotor motor.
- Lim it E , Lim it W: Limits east and west position.
- Lim it O ff : Removes the limitation.
- G o to R e f : Goes to reference.
. Channel Search: After saving the DiSEqC configuration at the highest signal quality,
press
button to start channel searching of the selected satellite.
VI-5. SAT/Tp Edit
A. Satellite Name
By pressing
Then, using
button, you can see the listed satellite names.
or buttons, you can select satellite.
,
,
B. Frequency
By pressing
button, you can see the all frequencies of transponders of a satellite,
and also you can select a frequency. Or, by pressing
you can select and view a frequency one by one.
,
,
or buttons,
C. Symbol Rate
You can see the symbol rate of the specified satellite on the right side of the menu.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
D. Polarization
You can select the polarization from Ho riz o n ta l and Ve rtic a l.
E. SAT Name Edit
You can change the name of the satellite by this menu.
Press button to display a keyboard. There are several items such as O th e r, S a ve
and S p a c e in the keyboard.
By selecting O th e r item, you can see a new alphabet character sets. The S p a c e item
means a space between two characters. And the S a ve item is used to confirm the new
name of the satellite.
Notes: You can move the cursor in the satellite name row by
by or button.
or and column
F. Add New TP
In case of new transponder information is added by broadcaster, you can add new
TP(transponder) information and enjoy new services.
Before adding new TP information, you should know the frequency, symbol rate and
polarization types.
After adding new information, you should confirm the new information by pressing
button at O K item.
G. Delete TP
By selecting this item, you can delete the selected TP (Transponder) information.
H. Add Satellite
Using this menu, you can add new satellite name by keyboard, then it will be added in
the Satellite Name menu.
I. Delete Satellite
By selecting this item, you can delete the selected satellite information.
J. Channel Search
It is used to go to C h a n n e l S e a rc h menu directly from S AT/Tp E d it menu.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
VI-6. Factory Setting
All the stored data can be reset just like it was manufactured.
VI-7.Transfer Program to Other PVR
It is used to transfer PVR program to other PVR for upgrading the PVR.
Notes: Please proceed this menu with connecting the PVR of same model and
same specification.
VI-8.Transfer Data to Other PVR
It is used to transfer PVR Data such as satellite/TP information to other PVR for
upgrading the PVR.
Notes: Please proceed this menu with connecting the PVR of same model and
same specification.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
VII. INFORAMTION
You can check the PVR version and refer the calendar.
VII-1. PVR STATUS
Check the PVR’s system information. It shows the PVR’s:
System ID
Loader Version
v
v
v
v
v
Device Version
Application Version
Last Update
44
Download from Www.Somanuals.com. All Manuals Search And Download.
VII-2. CALENDAR
Press the or button to select the year. Press the
or
button to select
the month.
VIII. COMMON INTERFACE
The menu differs according to each inserted CAM. If the module has not been
installed yet, the phrase ‘Not Installed’ will be accordingly indicated.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
IX. GAME
IX-1. ExBlock
IX-2. Poker
46
Download from Www.Somanuals.com. All Manuals Search And Download.
IX-3. Bricks Lay
IX-4. Bomb Hexa
47
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO RECORD AND PLAYBACK THE PVR
Time Shifting
1. To enable Time Shifting, the Tim e S h iftin g option should be enabled.
To find the Tim e S h iftin g option menu, follow the steps below.
Ma in Me n u
2. Press button to display Tim e S h iftin g progress bar.
3. To go to the desired playback position, press button or
HDD S e rvic e
Tim e S h iftin g
E n a b le
button. This function
is valid while the Time Shifting progress bar is displayed.
4. To remove the Time Shifting progress bar at once, press
or P LAY(
) button.
5. To play the live video, press S TOP(
) button.
6. To start Instant Playback, press
seconds back per each pressing of
button. The start position of the playback goes 10
button.
Recording while Time Shifting
1. Press
button to display Tim e S h iftin g progress bar.
2. To go to the desired position, press
button or
button.
3. Press RECORDING (
) button to start recording.
4. The recording will be started from the selected position.
5. Press S TOP(
) button to stop Time Shifting.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press S TOP (
) button again to stop recording.
Caution : If the recording time is less than about 1 minute, recording will not be done
successfully.
Recording, Checking and Editing reserving
To record services, refer to the following steps. There are four kinds of recording references.
Caution : If the recording time is less than about 1 minute, recording will not be done
successfully.
1.Immediate Recording by RECORDING (
) button
a. Recording
Press RECORD(
) button to record the channel you are watching.
To specify the stop time, go to R e c o rd in g menu and modify Du ra tio n item.
To go to the R e c o rd in g menu, press RECORDING (
) button once more.
b. Checking
A Recording Icon ( ) will be displayed on the upper rightmost of the TV screen
if the recording is in progress. For more information, press C HE C K( ) button
or INF O R MATIO N ( ) button.
c. Stop
Press S TOP(
) button and select Ye s to confirm the immediate stop.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
2.Immediate Recording by Menu Selection
a. Recording
To go to R e c o rd in g menu, press
button and select R e c o rd in g item by
pressing
button.
Select the options that you want to record with. Select S ta rt item and press
button.
For detailed information, refer to the explanation of R e c o rd in g menu in Me n u
o p e ra tio n s.
references.
done
b. Checking and modification
A Recording Icon (
recording is in progress. For more information, press INF O R MATIO N (
button or C HE C K ( ) button.
To check and modify the recording options, go to R e c o rd in g menu.
) will be displayed on the upper rightmost of the TV screen if the
)
c. Stop
Press S TOP (
) button and select Yes to confirm the immediate stop.
Otherwise, go to R e c o rd in g menu and press
button at S to p item.
em.
e more.
3. Delayed Recording
a. Recording
V screen
) button
Go to R e c o rd in g menu and press
button at the De la ye d R e c o rd in g item.
button at O K item.
Set the options that you want to record with. Press
For detailed information, refer to the explanation of R e c o rd in g menu in Me n u
o p e ra tio n s.
op.
b. Checking
To check the reserved recordings, go to E d it R e s e rva tio n menu of R e c o rd in g
menu.
c. Canceling
To cancel the reserved recording, go to E d it R e s e rva tio n menu of R e c o rd in g
menu. Press
button at C a n c e l item.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Recording by EPG
a. Recording
Press G UIDE(
) button to display EPG. Select a service that you want to record,
) button. Instead of RECORDING ( ) button,
and press RECORDING (
two times pressing of
button is valid for delayed recording.
) will be displayed.
The Recording mark (
b. Checking
Press G UIDE(
) button to display EPG. The reserved services for delayed
recording will be marked with a Recording mark(
).
c. Canceling
Press G UIDE(
) button to display EPG.
To cancel a reservation of delayed recording, select the service you want to cancel and
press RECORDING (
) button again. Instead of RECORDING (
)
button,
button is valid. The Recording mark (
) will disappear.
Playback a Recorded Service
1.Press the red button(
) to display the recorded service list.
2.Select a recorded service at the list.
3.Press
button to start playback.
Stop
1.To stop playback, press S TOP(
) button.
2.This function is available for playback.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Pausing
To pause the picture or playback, press P AUS E(
) button.
Press P AUS E(
) button or P LAY(
) button to quit pausing.
1. Pausing from live video
If the PAUSING is kept more than 5 seconds with enabled Tim e S h iftin g mode, the
play mode is changed to time-shifted playback. The video continues from the paused
image when resumed from PAUSING.
2.Pausing from Time Shifting
The video continues from the paused image when resumed from PAUSING.
3. Pausing from Playback
The video continues from the paused image when resumed from PAUSING.
Slow Motion Playback
1. To playback in slow motion(without sound), press the S LOW (
) button.
) button
2. Slow motion speed can be adjusted by pressing the S LOW (
repeatedly.
3. There are 7 steps in slow motion playback.
4. Press P LAY(
) button to resume playback with normal speed.
5. The slow motion function is available for the playback and the time-shifted playback.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Fast Motion Playback
1. If there is a Tim e S h iftin g or P la yb a c k progress bar, remove the progress bar by
pressing P LAY(
) button.
2. Press
button for fast motion playback. To change the playback speed, press
button repeatedly.
3. There are 4 steps in fast motion playback.
4. Press P LAY(
) button to resume playback with normal speed.
5. The slow motion function is available for the playback and the time-shifted playback.
Fast Forwarding and Rewinding
1. Press
button to display Time Shifting or Playback progress bar.
2. To go to the desired playback position, press
is valid while the progress bar is displayed.
button or
button. This function
3. To remove the progress bar at once, press
button.
Reverse Playback
1. Press
button to display the Time Shifting or Playback progress bar.
button without the progress bar.
2. To rewind with motion, press
The reverse motion is not so much smooth as fast motion playback because of the
limitation of the characteristics of MPEG signal.
Sometimes you may encounter the message The service is not running.. on the
reverse playback of scrambled data. The message will be disappeared in a few
seconds.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Bookmark
You can jump to a position directly by bookmark function in playback and time-shifted
playback.
To search positions very quickly and easily, use bookmarks.
1. Adding a bookmark
To add a bookmark, press BO O KMAR K (
) button at the position you want to
add it.
2. Going to a bookmark
Press GO TO BO O KMAR K (
) button to jump to the previous bookmark.
Then, the PVR plays from the book marked position.
3. Deleting a bookmark
To remove a bookmark, select the bookmarked position by GO TO BO O KMAR K
(
) button and press BO O KMAR K (
) button.
4. 30 sencods forward
If there is no bookmark, the PVR plays every 30 seconds forward by pressing
BO O KMAR K ( ) button.
Recording The Descrambled Live Service
1. Select the live video you want to record. Descramble the service with a proper
CAM and smart card. The live service should play well with the proper CAM
and smart card.
2. Start recording according to the recording procedure.
3. During recording, don’t change the channel neither try the time shifting function.
Caution : If there is any disturbance such as channel changing or time shifting during
recording, scrambled service will be recorded.
If the recording time is less than about 1 minute, recording will not be done
successfully.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Descrambling Services
1. Select and play back a service you want to descramble. Descramble the service with a
proper CAM and smart card. The live service should play well with the proper CAM and
smart card.
2. Press
button to display P la yb a c k progress bar.
button or
3. To go to the desired position, press
button.
4. Start playback. The video should be descrambled with a proper CAM and smart card.
The fast/slow motion descrambling is possible by fast/slow motion playback.
5. Start recording by RECORDING (
) Button.
6. The video displayed on TV will be recorded.
7. Press S TOP (
) button to stop recording.
) button again to stop playback
8. Press S TOP (
Caution : If the descrambling time is less than about 1 minute, descrambling will not be
done successfully.
Copying from Recorded Service
1. Select and play back a service to copy it.
2. Press
button to display P la yb a c k progress bar.
button or
3. To go to the desired position, press
button.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Start playback the recorded video you want to copy.
The fast/slow motion copying is possible by fast/slow motion playback.
5. Start copying by RECORDING (
) Button.
6. The video displayed on TV will be copied.
7. Press S TOP (
) button to stop copying.
) button again to stop playback
8. Press S TOP (
Caution : If the copying time is less than about 1 minute, copying will not be done
successfully.
Cut Out Selected Region
1. Start playback a recorded service.
2. Press
button to display Playback progress bar.
button with the progress bar.
) or (or ) button.
button once more.
3. To specify one end of region, press the
4. Move the cursor by pressing
(or
5. To cut out selected region, press the
Time Shifting while Recording
During recording, Time Shifting is possible only in the recorded channel.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Zapping while Recording
1. With S e p a ra te d mode in LNB s e ttin g menu.
For the tuner being recorded with, all the channels in the same TP can be selected.
For the other tuner, all the scanned channels can be selected.
2. With Lo o p Th ro u g h mode in LNB s e ttin g menu.
For the tuner being recorded with, all the channels in the same TP can be selected.
For the other tuner, all the channels of the same polarity and the same band as being
recorded channel can be selected.
Repeat mode
The repeat mode works only in playback mode. It does not work in time shifting mode.
There are two repeat modes.
1. Repeating the whole selected service.
a. Start playback a recorded service.
b. Press
c. Press
button without the progress bar to repeat the whole selected service.
button once more to cancel the repeating playback.
2 Repeating the selected region.
a. Start playback a recorded service.
b. Press
button to display Playback progress bar.
c. To specify one end of region, press the
button with the progress bar.
) or (or ) button.
e. To specify the other end of region, press the button once more.
f. Press button once more to cancel the repeating playback.
d. Move the cursor by pressing
(or
57
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING (Q & A)
Problem
Possible Causes
What to do
Check that the main power
cable is plugged into the power
socket.
Nothing appears on the
Front Panel.
The main power cable
is not connected.
No sound or picture, but
the front panel shows the
time or -- : --
PVR is in standby mode. Turn the power ON.
The satellite dish is not
pointing at the satellite.
No Signal or Weak Signal.
LNB is faulty.
The UHF Button is
pushed down .
Adjust the dish.
Check the settings in one of
the channel search submenus.
Check the cable connections.
Replace the LNB.
No Picture, No Sound.
Get out of the UHF mode.
No Batteries.
The RCU is incorrectly
aimed.
Change the batteries (both).
Aim the RCU properly to
the PVR.
The Remote Control Unit
(RCU) is not working.
The PVR is in standby
mode.
Change the mode to the
normal mode.
You have forgotten your
secret PIN Code.
Contact your Service Provider.
Time Setting is wrong.
2 broadcasts overlap.
The Time is not set properly. Adjust the Time on the Menu.
The channels are not
configured properly on the
RF mode.
Set the channels in the RF mode
under the A/V setting of the
Menu between 21 to 69 on the TV.
The CAM is not installed
properly.
Check that the CAM has been
correctly inserted.
The CAM is not working.
Black Screen.
The CAM is not working
correctly.
Eject the CAM and reinsert
it again.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
I. PVR SPECIFICATIONS
Item
Power
Specification
90 - 250VAC, 50 / 60Hz
Input Frequency
DATA Service
SCART
950 - 2150 MHz
1 RS - 232C, 115kbps
2 SCARTs : 1 VCR, 1 TV
1Video / 2 Audio (left and right)
SPDIF
A/V OUT
Digital Audio Out
LNB Power
Convertible 13.5/18V (500mA max)
QPSK / Multiple convolution coding
(DVB Compliant)
Modulation / FEC Type
DiSEqC
Tone Switching
RF Modulator
Specification
Video Compression
Aspect Ratio
On-Screen Display
EPG
DiSEqC 1.0 / 1.2 compatible
22 KHz
UHF Ch. 21-69 with PAL I/G/K
MPEG - 2/DVB Compliant SI
MP@ML in MPEG-2
4:3 or 16:9
256 colors with full resolution
Supported
Viaccess , Irdeto , Cryptoworks , Conax,
Nagravision , Mediaguard
Common Interface
II. CHANNEL PROCESSING
Item
Specification
950 - 2150 MHz
Input Frequency Range
Number of Channels
Tuning System
3500 TV Cannels and 1500 Radio Channels
PLL Digital Synthesis Channels
125 KHz Max
Tuning Step Size
Modulation
QPSK (DVB Specification)
Rates: 1/2, 2/3, 3/4, 5/6, 7/8
(DVB Specification)
Inner FEC
Outer FEC
Input Symbol Rate
IF Bandwidth
Reed Solomon Coding RS (204, 188, t=8)
2 to 45 Ms/s
27MHz
F Type ( IEC 169 - 24 female)
Connector Type
59
Download from Www.Somanuals.com. All Manuals Search And Download.
III. MPEG AUDIO
Item
Specification
Mono , Left , Right and Stereo
32, 44.1 and 48 kHz
Operation Mode
Sampling Rates
Resolution
18 bit digital to analogue Converters
. VIDEO SPECIFICATIONS
Item
Specification
Specification
Meets ETR 154 amended in ALM-95-021
PAL I ,G,K
TV System
Video Decoding
Video Resolution
ISO / IEC 13818-2, MP@ML
720 pixels 576 lines 25 frames per sec.
. RF MODULATOR
Item
Features
Specification
Input RF bypass Supported.
IEC Coaxial female 9.5 mm.(IEC 168-2)
CCIR UHF E 22-69 adjustable
Channel 36 (or TBD)
Connector
Channel Range
Pre-Set Channel
. POWER SUPPLY
Item
Input Voltage
Type
Specification
90 - 250VAC, 50 / 60Hz
SMPS
Power Consumption
Standby Power
Protection
Max.55Watt
10Watt
Separate internal fuse
60
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Technika Clock Radio CECR 10 User Manual
Toshiba Computer Monitor P32LS1 User Manual
Toshiba Telephone DK280 User Manual
Trane Heat Pump 22 5202 03 3605 User Manual
Tripp Lite Network Cables P952 002 User Manual
Tripp Lite Stud Sensor SNMPWEBCARD User Manual
Tripp Lite TV Cables N816 03M User Manual
Vanguard Heating Indoor Fireplace VYGF33NRA User Manual
ViewSonic Mouse MW407 User Manual
Vulcan Hart Convection Oven ECO2C ML 114572 User Manual