BUTLER 4812 USB VOIP
USER GUIDE
1.2
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
1
Installation
Base
6
6
1.1
1.2
1.3
2
Charger (only in Twin, triple or quattro pack)
Handset
Keys/LED
6
6
7
3
Display (LCD)
Handset operation
8
4
9
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
Setting the language
Making PSTN Calls
9
10
11
12
12
12
12
13
13
13
Receiving a PSTN Call
Activate/deactivate handsfree function
Transferring a call to another handset
Out of Range Warning
Setting the speaker volume
Call Duration Indicator on the display
Turning off the microphone (mute)
4.10 Pause key
4.11 Conference call (two internal DECT handsets and one external caller)
4.12 Locating a misplaced handset (paging)
4.13 Using the alphanumeric handset keypad
4.14 The Phone Book
13
13
14
14
15
16
16
17
18
18
18
19
19
20
21
21
22
23
23
24
24
24
25
25
26
26
26
27
4.15 Switch the handset ON/OFF
4.16 Setting the ring volume level on the handset
4.17 Setting the ringer melody on the handset
4.18 Setting the ring volume and melody of the base
4.19 Locking the key pad
4.20 Turning key click ON/OFF
4.21 The R key (flash)
4.22 Changing the PIN code
4.23 Subscribing a handset to a B24xx, 28xx, 29xx, 32xx, 40xx, 46xx, 48xx
4.24 Subscribing Butler 4812 handset on another base (other brand/model)
4.25 Removing subscription of a handset to a base unit
4.26 Selecting a base unit
4.27 Barring outgoing calls
4.28 Direct Call
4.29 Default settings (reset) of the parameters
4.30 Complete reinitialisation of the telephone
4.31 Setting the handset dialling mode
5
Caller ID/CLIP
Setting the date and time
The Call List
5.1
5.2
5.3
5.4
5.5
6
Calling a number from the Call List
Storing a number from the Call List in the Phone Book
Deleting numbers from the Call List
Voice mail indicator
Topcom Butler 4812 USB VoIP
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
7
7.1
USB PC interface operation
Installing the software
27
27
28
29
33
34
35
36
36
36
36
37
7.2
7.3
7.4
7.5
8
General PC call settings
Skype interface
SJ-Phone/Net2Phone interface
MSN Messenger interface
Trouble shooting
9
10
Technical characteristics
Topcom warranty
10.1 Warranty period
10.2 Warranty handling
10.3 Warranty exclusions
4
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
Safety Instructions
• Only use the charger plug supplied. Do not use other chargers, as this may damage the
battery cells.
• Only insert rechargeable batteries of the same type. Never use ordinary,
non-rechargeable batteries. Insert rechargeable batteries so they connect to the right
poles (indicated in the battery compartment of the handset).
• Do not touch the charger and plug contacts with sharp or metal objects.
• The operation of some medical devices may be affected.
• The handset may cause an unpleasant buzzing sound in hearing aids.
• Do not place the basic unit in a damp room or at a distance of less than 1.5 m away from
a water source. Keep water away from the handset.
• Do not use the telephone in environments where there is a risk of explosions.
• Dispose of the batteries and maintain the telephone in an environment-friendly manner.
• As this telephone cannot be used in case of a power cut, you should use a
mains-independent telephone for emergency calls, e.g. a mobile phone.
• This telephone uses rechargable batteries. You have to dispose of the batteries in an
environment friendly manner according to your country regulations.
Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the normal
household garbage but bring the product to a collection point for the recycling of electrical
and electronic equipments. The symbol on the product, user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling point. By re-
using some parts or raw materials from used products you make an important contribution to
the protection of the environment.
Please contact your local authorities in case you need more information on the collection
points in your area.
Cleaning
Clean the telephone with a slightly damp cloth or with an anti-static cloth. Never use cleaning
agents or abrasive solvents.
Topcom Butler 4812 USB VoIP
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
1 Installation
Before you use the telephone for the first time, you must first make sure the battery is
charged for 20 hours. If you do not do this, the telephone will not work optimally.
1.1 Base
For installation, do the following:
• Plug one end of the adaptor into the outlet and the other end into the adapter jack on the
bottom of the telephone.
• Connect one end of the telephone cord with the wall phone jack and the other end to the
bottom of the telephone.
adapter outlet
adapter jack
VIP
wall phone jack
telephone connection
• Connect one end of the USB cable into the USB port of your PC and the other end in the
telephone. For the software installation, please go to “USB PC interface operation” on
page 27
1.2 Charger (only in Twin, Triple or Quattro pack)
• Connect the AC adaptor to the electric socket
1.3 Handset
• Open the battery compartment (see below).
• Insert the batteries respecting the (+ and -) polarity.
• Close the battery compartment.
• Leave the handset on the base unit for 20 hours. The Line/Charge indicator
on the base unit will light up.
(LED)
+
-
-
+
I P
o
U S B
V
B
u
t
l
e
r
4
8
1
2
6
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
Battery indicator:
•
•
•
The battery is fully charged.
The battery is half drained (50%)
The battery is low. When the battery is low, you will hear warning signals and the
battery symbol on the display will blink.
2 eKysL/ ED
HANDSET
1.
2.
3.
4.
5.
6.
7.
8.
9.
Display
PC/VoIP key
1
Up/Call log key /
Handsfree key
6
12
3
Programming key/INT key
Line key
INT
Esc
/OK
VoIP
11
4
5
/ P
Redial/Pause key
Microphone
2
10
Volume/Ringer key
/
10. Alphanumeric keys
11. Delete/Mute key/Escape key
12. Down/Flash key /R
13. */Phonebook key
/
13
9
7
8
BASE
14. Paging key
15. Line/Charge indicator
(LED)
15
14
Topcom Butler 4812 USB VoIP
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
CHARGER
16. Charge indicator
16
3 Display (LCD)
4
1
2
3
PC
13 12 11
10 9
7
6 14 5
1.
2.
3.
4.
5.
Number of calls received.
Date (day/month) of calls received.
Time (hour:minutes) of calls received.
Call information.
Symbol display ( ):
– this symbol means that the handset is located within the range of the base unit.
– when this symbol starts blinking, this means you are beyond the range of the
base unit. Move closer to the base unit so that the connection between the base
unit and the handset can be restored.
6.
7.
Symbol display ( ):
– this symbol means that the telephone has received calls that are automatically
stored in the Call List.
Symbol display ( ):
– this symbol means that the mute function is activated, the microphone is turned
off during a conversation.
Symbol display ( ):
8.
9.
– this symbol appears on the display when you make or receive a call.
Symbol display ( ):
– this symbol means that the ringer is turned off. When you receive a call, the
telephone does not ring. The telephone will ring when you receive an internal
call.
8
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
10. Symbol display ( ):
– this symbol is the battery indicator.
11. Symbol display ( ):
– this symbol means you are in the menu.
12. Symbol display ( ):
– this symbol appears when you browse the numbers in the Phone Book.
13. Symbol display ( ):
– this symbol appears when you have received a voice mail message (See “6
Voice mail indicator” on page 27).
14. Symbol display ( ):
– this symbol means that the handsfree function is activated. You can now talk
without having to pick up the handset.
– Blinks when base telephone is active. You can’t take the line with the handset as
long as base telephone is active!
15. Symbol display (PC):
– Blinks during incoming PC call
– Steady during PC calls
4 Handset operation
This section only describes PSTN operation and discards any co-related pc
call operations! For PC operation, See ”7 USB PC interface operation”.
4.1 Setting the language
The telephone has 14 display languages: see display languages table on packaging!!
To set the language, do the following:
• Press the Programming key .
•
Press the Up or Down key
repeatedly until ‘SETTING’ appears on the display
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
repeatedly until ‘LANGUAGE’ appears on the display.
• The language set appears on the display.
Press the Up or Down key repeatedly to select the language you would like to use.
•
• Once the desired language appears on the display, press the Programming key to
confirm your selection or repeatedly press the ESC key to leave the menu.
Topcom Butler 4812 USB VoIP
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
4.2 Making PSTN Calls
When making external calls through the handset, base telephone operation
is not possible!
4.2.1 External Call
• Press the Line key .
• The Line/Charge indicator
(LED) on the base unit will blink. ‘EXT’ and the Call
symbol appear on the display.
You will hear the dial tone. Dial the telephone number you wish to call.
•
• The number appears on the display and is dialled.
• After finishing your call, press the Line key to hang up.
4.2.2 Number preparation
• Dial the telephone number you wish to call. You can correct the number by pressing the
Delete/Mute key .
• Press the Line key .
• The Line/Charge indicator
(LED) on the base unit will blink. ‘EXT’ and the Call
symbol appear on the display.
The telephone number is dialled automatically.
•
• After finishing your call, press the Line key to hang up.
4.2.3 Redialling the last number dialled
• Press the Line key .
• The Line/Charge indicator
(LED) on the base unit will blink. ‘EXT’ and the Call
symbol appear on the display.
You will hear the dial tone.
•
• Press the Redial key . The number you last called is dialled automatically.
4.2.4 Redial one of the last 5 numbers dialled
• Press the Redial key .
• Select ‘REDIAL’ and press OK
• The number you last called appears on the display. If you would like to dial one of the
last 5 numbers dialled, press the Redial key a few times until the desired number
appears on the display.
• Press the Line key .
• The number shown on the display is dialled automatically.
• After finishing your call, press the Line key to hang up.
4.2.5 Calling a programmed number from the Phone Book
The telephone has a Phone Book in which you can program the telephone number with
name. If you would like to call a number from the Phone Book:
• Press the Phone Book key . The first number of the Phone Book appears on the
display.
• Press the Up or Down key
call.
repeatedly to select the telephone number you wish to
10
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
• Press the Line key .
• The number shown on the display, is dialled automatically.
• After finishing your call, press the Line key to hang up.
4.2.6 An internal call: calling another handset
This function only works if multiple handsets are subscribed to the base unit !
• Press the INT key twice.
• ‘INT‘ appears on the display
• Dial the number of the handset you would like to call.
• After finishing your call, press the Line key to hang up.
4.3 Receiving a PSTN Call
4.3.1 Receiving an external call
• All subscribed handsets will ring when you receive a call.
•
The Call symbol blinks on the display.
• The telephone number of the caller appears on the display if you have Caller ID service
(CLIP). Consult your telephone company. The name of the caller also appears on the
display if:
– the name is programmed into the Phone Book
– the network sends the name together with the telephone number (FSK CID
system only).
• Press the Line key to accept the external call.
• During the call ‘EXT’ and the symbol appear on the display. The call timer starts
running.
• After finishing your call, press the Line key to hang up or put the handset back on the
base unit.
4.3.2 Receiving an internal call
This function only works if multiple handsets are subscribed to the base unit!
• The handset rings.
• ‘INT’ and the number of the handset calling, appear on the display. The Call symbol
blinks on the display.
• Press the Line key to accept the internal call.
•
During the call, ‘INT’, the handset number of the caller and the symbol
display. The call timer starts running.
• After finishing your call, press the Line key to hang up.
appear on the
4.3.3 Receiving an external call during an internal call
If you receive an external call during an internal call, you will hear a call waiting tone (double
beep) on both handsets being used for an internal call.
• Press the Line key twice to accept the external call.
• After finishing your call, press the Line key to hang up.
Topcom Butler 4812 USB VoIP
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
4.4 Activate/deactivate handsfree function
This function allows you to communicate without having to pick up the handset. When you
are talking, press the Up/Handsfree key / to activate the handsfree function.
Press the same button to deactivate the handsfree function.
When you are calling in handsfree mode and you want to change the
volume, press the Volume
button.
When you use the handsfree function for a long time, the batteries will be
empty quickly!
4.5 Transferring a call to another handset
•
You have an external caller on the line.
• Press the INT key twice.
• The external call is now on hold.
• ‘INT‘ appears on the display.
•
•
Dial the number of the handset to which you would like to transfer the call.
If the handset dialled is answered, you can have an internal conversation. Press the
Line key and the external call is transferred.
• If the handset dialled is not answered, press the Down key to speak to the external
caller again.
4.6 Out of Range Warning
If the handset is out of range of the base unit, a warning signal will sound.
• ‘SEARCHING’ appears on the display and the symbol blinks on the display.
• Move closer to the base unit.
•
As soon as you are back within range of the base unit, a signal sounds and the
symbol stops blinking.
4.7 Setting the speaker volume
Use the Volume/Ringer key
/ to set the volume of the speaker (handset). You can select
from 5 levels. The telephone is set to level ‘3’ by default.
During a call, you can change the volume:
• Press the Volume/Ringer key
/ .
• The volume level currently set appears on the display.
• Use the number keys to set the desired level (1-5).
• Press the Volume/Ringer key
/ to confirm your selection.
You have 8 seconds to set the desired volume; if you do not, the telephone
returns to standby mode and the volume remains unchanged.
12
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
The Speaker volume for normal calls and PC-calls are independent.
4.8 Call Duration Indicator on the display
As soon as you press the Line key the call duration appears on the display (minutes-
seconds).
E.g. “ 01:20 “ for 1 minute and 20 seconds.
The call duration remains visible on the display for 5 seconds after each call.
4.9 Turning off the microphone (mute)
It is possible to turn off the microphone during a call by pressing the Delete/Mute key . Now
you can speak freely without the caller being able to hear you.
• You are on the phone. The Line/Charge indicator
and the Call symbol appears on the display.
(LED) on the base unit will blink
• Press the Delete/Mute key
The symbol ‘X’ appears on the display ( ).
• When you want to resume the conversation, press the Delete/Mute key
to turn off the microphone.
•
again.
• The symbol ‘X’ disappears from the display ( ). The person on the other end of the line
can hear you again.
4.10 Pause key
If you dial a telephone number and you would like to add a pause to this number, press the
Pause key at the desired place in the number.
When you call this number, this pause (3 seconds) is automatically included.
4.11 Conference call (two internal DECT handsets and one external caller)
You can have a telephone conversation with one internal and one external caller at the same
time.
• While on the line with an external caller, press the INT key twice.
• The external call is now on hold.
• ‘INT‘ appears on the display.
• Dial the number of the handset you would like to include in the call.
• Once the handset dialled is answered, keep the ‘#’ key pressed for 3 seconds.
• ‘CONFERENCE’ appears on the display.
• Now you are connected to one external and one internal caller (conference call).
4.12 Locating a misplaced handset (paging)
If you cannot find the handset, briefly press the Paging key on the base unit.
All handsets subscribed with the base unit will sound a signal so you can locate the
misplaced handset. To stop the signal, briefly press the Line key on any handset.
Topcom Butler 4812 USB VoIP
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
4.13 Using the alphanumeric handset keypad
Use the alphanumeric keypad to type text. To select a letter, press the corresponding key.
E.g. if you press the alphanumeric key ’5’, the first character (j) appears on the display. Press
it repeatedly to select other characters from this key.
Press the ‘2’ key twice to select the letter ‘B’. If you would like to select both ‘A’ and ‘B’ after
each other, first press the ‘2’ key once to select ‘A’, wait 2 seconds until the cursor moves to
the next position and then press the ‘2’ key twice to select ‘B’. You can delete characters
mistakenly typed by using the Delete key . The character in front of the cursor will be
deleted. You can move the cursor by pressing the Up and Down keys
.
4.14 The Phone Book
The phonebook allows you to memorise 50 telephone numbers and names. You can enter
names of up to 10 characters length and numbers of up to 25 digits length.
4.14.1 Adding a number and a name to the Phone Book
• Press the Programming key .
• Press the Up or Down key
repeatedly until ‘PHONE BOOK’ appears on the display.
• Press the Programming key .
• ‘SEARCH‘ appears on the display.
• Press the Up or Down key
repeatedly until ‘ADD NEW’ appears on the display.
• Press the Programming key .
• ‘NAME‘ appears on the display.
• Enter the name. Use the alphanumeric keys.
• Press the Programming key .
• Enter the telephone number. Use the alphanumeric keys.
• Press the Programming key .
• You will hear a long beep. The name and the number are stored in the Phone Book.
4.14.2 Looking up a number in the Phone Book
• Press the Programming key .
• Press the Up or Down key
repeatedly until ‘PHONE BOOK’ appears on the display.
• Press the Programming key .
• ‘SEARCH‘ appears on the display.
• Press the Programming key .
• Enter the first letters of the desired name.
• Press the Programming key .
• The first name, corresponding with these letters appears on the display.
• Press the Up or Down key
to browse for other numbers in the Phone Book.
• Once the desired number appears on the display, the number will be automatically
dialled once the Line key is pressed.
You can also enter the phonebook by press and hold the phonebook key
for 3 seconds!
14
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
4.14.3 Changing a name or number in the Phone Book
• Press the Programming key .
• Press the Up or Down key
repeatedly until ‘PHONE BOOK’ appears on the display.
• Press the Programming key .
• ‘SEARCH‘ appears on the display.
• Press the Up or Down key
• Press the Programming key .
repeatedly until ‘EDIT’ appears on the display.
• The first number in the Phone Book appears on the display.
•
Press the Up or Down key
until the desired number appears on the display.
• Press the Programming key to change the selected number programmed into the
memory.
• Press the Delete key to delete each letter of the name and use the alphanumeric
keypad to enter the correct name.
• Press the Programming key .
• Press the Delete key to delete each digit of the number and use the alphanumeric
keypad to enter the correct number.
• Press the Programming key to save the changes made.
4.14.4 Deleting name and number from the Phone Book
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
repeatedly until ‘PHONE BOOK’ appears on the display.
• ‘SEARCH‘ appears on the display.
Press the Up or Down key repeatedly until ‘DELETE’ appears on the display.
• Press the Programming key .
• The first number in the Phone Book appears on the display.
•
• Press the Up or Down key
display.
until the number you want to delete appears on the
• Press the Delete key
• ‘DELETE ?’ appears on the display.
.
• Press the Programming key to confirm that you want to delete it.
4.15 Switch the handset ON/OFF
4.15.1 Switch the handset off
The handset is turned on.
• Press the Programming key .
• Press the Up or Down key
•
repeatedly until ‘POWER OFF?’ appears on the display.
Press the Programming key . The telephone turns itself off. You cannot dial any more
numbers, nor receive any calls.
If you would like to leave the menu without turning off the handset, press
the Delete/Mute key
.
Topcom Butler 4812 USB VoIP
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
4.15.2 Switch the handset on
The handset is turned off.
•
Press the Programming key . The telephone turns itself on.
4.16 Setting the ring volume level on the handset
You can change the ring volume of an incoming call. You have 10 levels. You can set the
ring volume of internal and external calls separately so you can hear a difference.
If you select level ‘0’, the symbol appears on the display and you no longer hear the phone
ring when an external call is received (you still hear it ring for internal calls).
Level ‘9’ is the highest level. The telephone is set to level ‘5’ by default.
4.16.1 Setting the ring volume for external calls (0-9)
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
repeatedly until ‘RING SEL’ appears on the display.
• ‘EXTERNAL‘ appears on the display.
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
repeatedly until ‘VOLUME’ appears on the display.
• The current volume level used appears on the display.
• Enter a number between 0 and 9 to select the desired ringer volume. Use the number
keypad to do this.
• Press the Programming key to confirm your selection.
4.16.2 Setting the ringer volume for internal calls (1-9)
• Press the Programming key .
•
Press the Up or Down key
• Press the Programming key .
• ‘EXTERNAL‘ appears on the display.
repeatedly until ‘RING SEL’ appears on the display.
• Press the Up or Down key
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
repeatedly until ‘INTERNAL’ appears on the display.
repeatedly until ‘VOLUME’ appears on the display.
• The current volume level appears on the display.
• Enter a number between 1 and 9 to select the desired ringer volume. Use the number
keypad to do this.
• Press the Programming key to confirm your selection.
4.17 Setting the ringer melody on the handset
You can change the ringer melody for an incoming call. You have 18 ringer melodies to
choose from (1-18).
4.17.1 Setting a ringer melody for external calls (1-18)
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
repeatedly until ‘RING SEL’ appears on the display.
16
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
• ‘EXTERNAL‘ appears on the display.
• Press the Programming key .
• ‘MELODIES‘ appears on the display.
• Press the Programming key .
• The currently set ringer melody appears on the display.
• Enter a number between 1 and 9 to select he desired ringer melody. Use the number
keypad to do this.
• Press the Programming key to confirm your selection.
4.17.2 Setting a ringer melody for internal calls (1-9)
• Press the Programming key .
•
Press the Up or Down key
• Press the Programming key .
• ‘EXTERNAL‘ appears on the display.
repeatedly until ‘RING SEL’ appears on the display.
• Press the Up or Down key
• Press the Programming key .
repeatedly until ‘INTERNAL’ appears on the display.
• ‘MELODIES‘ appears on the display.
• Press the Programming key .
• The currently set ringer melody appears on the display.
• Enter a number between 1 and 9 to select the desired ringer melody. Use the number
keypad for this.
• Press the Programming key to confirm your selection.
4.18 Setting the ring volume and melody of the base
4.18.1 Setting the base ring volume (0-9)
• Press the Programming key
Press the Up or Down key
• Press the Programming key
• ‘EXTERNAL‘ appears on the display.
.
•
repeatedly until ‘RING SEL’ appears on the display.
.
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
repeatedly until ‘BASE’ appears on the display.
.
repeatedly until ‘VOLUME’ appears on the display.
.
• The current volume level used appears on the display.
• Enter a number between 0 and 9 to select the desired ringer volume. Use the number
keypad to do this.
• Press the Programming key to confirm your selection.
4.18.2 Setting a ringer melody
• Press the Programming key
Press the Up or Down key
• Press the Programming key
• ‘EXTERNAL‘ appears on the display.
.
•
repeatedly until ‘RING SEL’ appears on the display.
.
• Press the Up or Down key
• Press the Programming key
repeatedly until ‘BASE’ appears on the display.
.
Topcom Butler 4812 USB VoIP
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
• Press the Up or Down key
• Press the Programming key
repeatedly until ‘VOLUME’ appears on the display.
.
• The current volume level used appears on the display.
• Enter a number between 0 and 9 to select the desired ringer volume. Use the number
keypad to do this.
• Press the Programming key to confirm your selection.
4.19 Locking the key pad
If you lock the alphanumeric keypad, it is impossible to dial a telephone number.
Only the Programming key can still be used. ‘KEY LOCKED’ will be displayed on the
display.
• Press the Programming key .
• Press the Up or Down key
repeatedly until ‘KEY SETUP’ appears on the display.
• Press the Programming key .
• KEY LOCK‘ appears on the display.
• Press the Programming key .
• The current status of the keypad appears on the display:
– ‘LOCK’: the keypad is locked
– ‘UNLOCK’: the keypad is not locked
• Press the Up or Down key to make your selection.
• Press the Programming key to confirm your selection.
You can also Press and hold the #-key until KEY LOCK appear. To unlock,
press and hold the #-key again.
4.20 Turning key click ON/OFF
You can set the telephone to make a sound whenever you press a key.
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
repeatedly until ‘KEY SETUP’ appears on the display.
repeatedly until ‘KEY CLICK’ appears on the display.
• The current status appears on the display:
– ‘CLICK ON’: turn on key click
– ‘CLICK OFF’: turn off key click
• Press the Up or Down key to make your selection.
• Press the Programming key to confirm your selection.
4.21 The R key (flash)
Press the Flash key ‘R’ to use certain services such as “call waiting” (if your telephone
company offers this feature); or to transfer calls if you use a telephone exchange (PABX).
The Flash key ‘R’ is a brief interruption of the line. You can set the flash time to 100ms or
18
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
300ms. This is set to 100ms by default! However, if your system requires a longer flash time,
do the following:
• Press the Programming key .
•
Press the Up or Down key
• Press the Programming key .
Press the Up or Down key
repeatedly until ‘SETTING’ appears on the display
repeatedly until ‘RECALL’ appears on the display.
repeatedly to select the flash time:
•
• Press the Programming key .
• Press the Up or Down key
– SHORT = 100ms
– LONG = 300ms
• Press the Programming key to confirm your selection.
4.22 Changing the PIN code
Certain functions are only available if you know the PIN code of the telephone.
The PIN code has 4 digits. The default PIN code setting is ‘0000’. If you would like to change
the default PIN code and set your own secret code, do the following:
• Press the Programming key .
•
Press the Up or Down key
repeatedly until ‘SETTING’ appears on the display.
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
repeatedly until ‘PIN CODE’ appears on the display.
• ‘OLD CODE’ appears on the display.
• Enter the old PIN code. Use the number keys.
• Press the Programming key .
•
‘NEW CODE’ appears on the display.
• Enter the new PIN code in. Use the number keys.
• Press the Programming key .
• ‘AGAIN’ appears on the display.
• Enter the new PIN code again. Use the number keys.
• Press the Programming key .
• You hear a confirmation tone. The new PIN code has been set.
Do not forget your personal PIN code. If you do, you have to restore the
default settings (reset – See “4.30 Complete reinitialisation of the
telephone” on page 24).
4.23 Subscribing a handset to a B24xx, 28xx, 29xx, 32xx, 40xx, 46xx, 48xx
In order to be able to make and receive telephone calls, a new handset has to be subscribed
to the base unit. You can subscribe 5 handsets to one base unit. By default, each handset is
subscribed as handset 1 on the base unit upon delivery (base unit 1).
!!! You only need to subscribe the handset if:
• the handset subscription has been removed from the base unit (e.g. for reinitialisation)
• you want to subscribe a different handset to this base unit.
The underlined procedure is only applicable to a B48XX handset and base unit!!
Topcom Butler 4812 USB VoIP
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
Keep the Paging key on the base unit pressed for 10 seconds until The Line/Charge
indicator
on the base unit begins to blink rapidly. The Line/Charge indicator
will blink
rapidly for one minute. During this minute, the base unit is in subscribing mode and you must
do the following to subscribe the handset:
• Press the Programming key .
•
Press the Up or Down key
repeatedly until ‘BASE SUB’ appears on the display.
• Press the Programming key .
• ‘BASE _‘ appears on the display.
• Enter a number of the base unit you would like to subscribe the handset to (1-4). Use the
number keypad.
•
‘SEARCHING’ and the symbol appears on the display.
Each handset can be subscribed to 4 different DECT base units. Each base
unit is assigned a number from 1 to 4 in the handset. When you subscribe a
new handset, you can assign a base unit number. It is best to use ‘1’.
•
The RFPI code (each base unit has a unique RFPI code) appears on the display and a
signal sounds when the handset has found the base unit.
• Press the Programming key .
• ‘PIN’ appears on the display.
• Enter the 4-digit PIN code of the base unit in (default PIN code is ‘0000’). Use the
number keypad.
• Press the Programming key .
• The handset is subscribed to the base unit.
4.24 Subscribing Butler 4812 handset on another base (other brand/model)
Put the base in subscription mode (see manual of the base). If the base is in subscribing
mode, you have to do the following to subscribe the handset:
• Press the Programming key .
•
Press the Up or Down key
repeatedly until ‘BASE SUB’ appears on the display.
• Press the Programming key .
• ‘BASE _‘ appears on the display.
• Enter a number for the base unit to which you would like to subscribe the handset (1-4).
• Use the number keypad.
•
•
‘SEARCHING’ and the symbol appear on the display.
The RFPI code (each base unit has a unique RFPI code) appears on the display and a
signal sounds once the base unit is found by the handset.
• Press the Programming key .
• ‘PIN’ appears on the display.
• Enter the 4-digit PIN code of the base unit (default PIN code is ‘0000’). Use the number
keypad.
• Press the Programming key .
• The handset is subscribed to the base unit.
20
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
4.25 Removing subscription of a handset to a base unit
It is possible to cancel subscription of a handset to a base unit. You would do this if a
handset is damaged and has to be replaced by a new one.
You can only cancel subscription of another handset, not the handset you
are using to do the cancellation procedure.
• Press the Programming key .
•
Press the Up or Down key
• Press the Programming key .
Press the Up or Down key
repeatedly until ‘SETTING’ appears on the display.
repeatedly until ‘REMOVE HS’ appears on the display.
•
• Press the Programming key .
• ‘PIN’ appears on the display.
• Enter your 4-digit PIN code in (default PIN code is ‘0000’). Use the number keypad.
• Press the Programming key .
• ‘REMOVE HS’ appears on the display.
• Dial the number of the handset you want to remove (1 –5). Use the number keypad.
• Press the Programming key .
• ‘REMOVE HS’ appears on the display and the handset is removed
• NOT SUB’ appears on the handset removed.
4.26 Selecting a base unit
If your handset is subscribed to several base unit stations (max. 4) , you must select a base
unit because the handset can only communicate with one base unit at a time. There are two
possibilities:
4.26.1 Automatic selection
If you set the handset to ‘automatic selection’, the handset will automatically choose the
closest base unit in standby.
• Press the Programming key .
•
Press the Up or Down key
repeatedly until ‘SETTING’ appears on the display.
repeatedly until ‘BASE SEL’ appears on the display.
repeatedly until ‘AUTO’ appears on the display.
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
•
•
‘SEARCHING’ and the symbol appear on the display.
A signal sounds once the handset has found a base unit.
Topcom Butler 4812 USB VoIP
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
4.26.2 Manual selection
If you set the handset to ‘manual selection’, the handset will only choose the base unit you
have set.
• Press the Programming key .
•
Press the Up or Down key
repeatedly until ‘SETTING’ appears on the display.
repeatedly until ‘BASE SEL’ appears on the display.
repeatedly until ‘MANUAL’ appears on the display.
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
•
Press the Up or Down key
• Press the Programming key .
• ‘BASE -‘ appears on the display.
• Enter the number of the base unit you want to select (1-4). Use the number keypad.
• Press the Programming key .
• ‘SEARCHING’ and the symbol appear on the display.
• A signal sounds once the selected base unit has been found.
•
•
Before you can select a base unit, the base unit must be subscribed to
the handset first.
If ‘NOT SUB’ appears on the display, this means the selected base unit
does not exist or the handset has not been subscribed.
4.27 Barring outgoing calls
You can program the handsets to bar calls to certain telephone numbers so that for instance
‘00’ international numbers cannot be called. Up to 5 numbers (of max. 5 digits) can be barred.
To do this, do the following:
• Press the Programming key .
•
Press the Up or Down key
• Press the Programming key .
• Press the Up or Down key
repeatedly until ‘SETTING’ appears on the display.
repeatedly until ‘BARRING’ appears on the display.
• Press the Programming key .
• ‘PIN’ appears on the display.
•
Enter your PIN code
• Press the Programming key .
• ‘BAR NUM ’ appears on the display. You are in memory “1. _ _ _ _ _”.
• Press the Up or Down key to select one of the 5 memories.
• Enter the number (max. 5 digits) to be barred, e.g. 01486.
• Press the Programming key .
•
‘HS _ _ _ _ _’ (= number on the handset (1-5)) ‘01486’ (= the barred numbers) appear
on the display.
•
•
Enter the numbers of the handsets from which the barred numbers cannot be called.
e.g. Press the number key 2, 3 and 5. On the display, this will appear: HS _2 3_5 01486
These handsets can no longer dial numbers beginning with ‘01486’.
• Press the Programming key to confirm your selection. Repeat the same procedure
described above if you would like to bar other numbers (max. 5)!
22
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
4.28 Direct Call
By setting a Direct Call number, the phone will automatically take the line and dial out this
number. This function is useful to use the phone as a emergency phone.
4.28.1 To program the Direct Call number
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
until ‘DIRECT’ appears on the display
• If necessary, delete the existing number by pressing the Delete-key a few times
• Enter the direct number
• Press the Programming key
4.28.2 Turn the Direct Call function ON/OFF
To turn it ON:
• Press the Programming key
• Press the Up or Down key
• Press the mute-key for 2s
• ‘DIRECT ON’ appears on the display
until ‘DIRECT’ appears on the display
To turn if OFF:
• Quick press the Programming key twice
4.29 Default settings (reset) of the parameters
You can reset the standard (default) settings in the telephone. You need the PIN code to do
this.
The default settings are:
Keypad:
Key clicks:
not locked
active
level
Speaker volume:
Ringer melody:
Ringer volume :
Selection base unit:
Flash time:
1
5
automatic
100ms
To restore the default settings, do the following:
• Press the Programming key .
•
Press the Up or Down key
repeatedly until ‘SETTING’ appears on the display.
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
• ‘PIN’ appears on the display.
• Enter your PIN code.
repeatedly until ‘RESET’ appears on the display.
• Press the Programming key .
Topcom Butler 4812 USB VoIP
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
4.30 Complete reinitialisation of the telephone
This function allows you to completely reinitialise the telephone without requiring your PIN
code. This will delete all Phone Book memory entries, all handsets will be removed, all default
settings will be restored and the default PIN code will be restored to ‘0000’.
Do the following:
• Disconnect the battery in the telephone.
•
•
Keep the ‘*’ key pressed and reconnect the battery until the handset rings continually
and the display lights up. Release the ‘*’ button and press the Programming key .
The handset finds the base unit and a signal sounds.
• Briefly press the ‘*’ key.
• ‘RESET ?‘ appears on the display.
• Press the Programming key to confirm your selection of disconnect the battery to
discontinue the procedure.
• ‘RESETTING‘ appears on the display and a long beep tone sounds.
• ‘NOT SUB‘ appears on the display. The handset is completely reinitialised.
Afterwards, you must resubscribe all handsets as described in point 4.23! However you no
longer need to set the base unit to subscription mode, because this now happens
automatically!
4.31 Setting the handset dialling mode
There are two types of dialling modes:
• DTMF/Tone dialling (the most common)
• Pulse dialling (for older installations)
To change the mode of numeration:
• Press the Programming key
•
Press the Up or Down key
• Press the Programming key
Press the Up or Down key
• Press the Programming key
repeatedly until ‘SETTING’ appears on the display.
•
repeatedly until ‘DIAL MODE’ appears on the display.
• Select ‘TONE’ or ‘PULSE’ by means of the UP and Down key
• Press the Programming key to confirm
5 Caller ID/CLIP
(This service only works when you have a Caller ID/Clip subscription. Contact your telephone
company).
When you receive a call, the telephone number of the caller, the date and time appears on
the handset display. The telephone can receive calls in both FSK and DTMF. If the name is
programmed in the Phone Book, the name in the Phone Book is displayed!
The telephone can store 30 calls in a Call List that can be reviewed later. The telephone
never stores the same call twice. When the memory is full, the new calls automatically
24
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
replace the oldest calls in the memory. The symbol on the display blinks if the call is not
read or not answered. If the Call List is empty and you press the Up key , three beep tones
will sound.
You can view the information of an incoming call as follows:
• Press the Up key , select ‘CLIP’ and press OK
• Press the Up key . The name (if sent by the network or present in the Phone Book
memory) of the caller, the sequence number of the call in the Call List, the date and time
of the call appear on the display.
• Press the Down key . The telephone number of the caller appears on the display.
5.1 Setting the date and time
When you receive an incoming call and the date and time are not sent together with the
telephone number or PC TIME (see “PC TIME Settings” on page 29) is not On, this means
that the date and the time will not be shown on the display. By setting the date and time, they
will be shown on the display, together with the telephone number, every time a call comes in !
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
a few times until ‘SETTING’ appears on the display.
•
•
’DATE/TIME’ appears on the display.
Press the Programming key again.
• When ‘YEAR’ appears on the display, enter the 2 last numbers of the year (00=2000,
01=2001, ...) and press the Programming key to confirm.
• When ‘MONTH’ appears on the display, enter the month (01=January, 02=February, ...)
and press the Programming key to confirm.
•
When ‘DAY’ appears on the display, enter the day of the month and press the
Programming key to confirm.
•
When ‘HOUR’ appears on the display, enter the current hour (in 24h format) and press
the Programming key to confirm.
• When ‘MINUTES’ appears on the display, enter the minutes and press the Programming
key to confirm.
The date and time are now set !
5.2 The Call List
The calls received are stored in the Call List (max. 30 numbers).
• Briefly press the Up key to view the most recent call.
• Select ‘CLIP’ and press OK
• The name of the most recent caller appears on the display. If no name is available, ‘NO
NAME’ appears on the display.
• If it is a private number, ‘UNAVAL’ appears on the display.
• The date and time the call was received are linked to each call.
• Briefly press the Down key to view the telephone number of the call.
• Briefly press the Down key to browse other numbers on the list.
Topcom Butler 4812 USB VoIP
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
•
•
•
If neither the Up or Down key
telephone will return to standby mode.
is pressed for 15 seconds, the
After a call is received, the number of the caller remains on the display
for 15 seconds after the last ring.
Caller ID is not available while you are on the line.
5.3 Calling a number from the Call List
• Press the Up key , select ‘CLIP’ and press OK
• Press the Up key to look up the desired call. Press the Down key to view the
telephone number.
• Once the number is on the display, press the Line key and the number is dialled
automatically. (The symbols and ‘EXT’ appear on the display and the call timer
starts.)
5.4 Storing a number from the Call List in the Phone Book
• Press the Up key , select ‘CLIP’ and press OK
• Press the Up key to look up the desired number.
• Press the Phone Book key twice.
• ‘STORE’ appears on the display.
• The number is stored in the Phone Book. If the call was displayed without a name (NO
NAME), you can add a name to this number in the Phone Book afterwards
• The telephone returns to standby-modus.
5.5 Deleting numbers from the Call List
5.5.1 Deleting one number
• Press the Up key , select ‘CLIP’ and press OK
• Press the Up key to find the call you would like to delete.
• Once this call appears on the display, press the Delete key
• ‘DELETE?’ appears on the display.
.
• Press the Programming key to confirm your selection or the Delete key
• The call is deleted and the next call appears on the display.
to cancel.
to cancel.
5.5.2 Delete all numbers
• Press the Up key , select ‘CLIP’ and press OK
• Keep the Delete key
pressed until ‘DELETE ALL’ appears on the display.
• Press the Programming key to confirm your selection or the Delete key
• All calls are deleted.
26
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
6 Voice mail indicator
This function only works if you have the voice mail or phone mail service and if the network
sends this indication along with the caller ID (CLIP) information!
When you receive a new message in your voice mail system, the
display. Once you have listened to your messages, the
icon will appear on the
icon will disappear.
7 USB PC interface operation
This section only describe the phone functions when making calls over
internet (VoIP) !
7.1 Installing the software
You can only make or receive calls over internet when you have a internet connection and
one of the following programs installed:
– MSN Messenger
– SJ-Phone or Net2Phone
Minimum system requirements:
• PC Running under Windows XP or 2000
• 32 MB free memory
• 20 MB Free hard disk space
• Internet connection with 56Kbps or higher
– Install the software from the CD included with the phone:
For the latest version of the software please look at our website:
– Insert the CD when the PC is on. If the program doesn’t run automatically, click
on the Start icon and select Run. Enter D:\CD_Start.exe (if D in not your CD-
ROM drive, enter the appropriate letter)
– The installation wizard will guide you through the process
– Reboot the PC after installation
Topcom Butler 4812 USB VoIP
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
– Plug the USB plug of the phone to the PC after your PC has been started up
again.
– Windows will install the proper USB driver for the phone
– Select the appropriate interface for Skype, MSN Messenger, SJ-phone or
Net2Phone at the Butler 4812 software program
– Open the corresponding internet phone program
7.2 General PC call settings
7.2.1 Setting the PC ringer melody and volume on the handset
You can change the ringer volume and melody for an incoming PC call. You have 18 ringer
melodies and 9 volumes to choose from.
• Press the Programming key .
•
Press the Up or Down key
• Press the Programming key .
‘PC RING‘ appears on the display.
repeatedly until ‘RING SEL’ appears on the display.
•
• Press the Programming key .
• Press the Up or Down key
• Press the Programming key .
repeatedly to select the volume or ring melodie setting
• The currently set ringer melody or volume appears on the display.
• Enter a number between 0 and 9 to select he desired ringer volume or 1-18 for the
melodie. Use the number keypad to do this.
• Press the Programming key to confirm your selection.
28
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
7.2.2 PC TIME Settings
When the PC time setting is On the Call log will use the PC clock to store the date and time
of incoming calls:
• Press the Programming key .
• Press the Up or Down key
• Press the OK.
• Press the Up or Down key
repeatedly until ‘SETTINGS’ appears on the display.
repeatedly until PC TIME appears on the display
•
•
Press OK and select ON or OFF
Press OK to confirm
7.3 Skype interface
This section describes the operation under Skype! For more information on
MAKE SURE YOU HAVE SELECTED ‘SKYPE’ as interface in the Butler 4812 program:
7.3.1 General comments:
• In idle mode the display of the phone will show you the net status (online, off line, etc...)
• ‘NO CONNECT’ will be displayed when the USB connection fails or when the Butler
4812 software isn’t installed or open.
7.3.2 Making Skype calls
Receiving an incoming Skype calls
When you receive an incoming Skype call, the callers nickname will be shown on the handset
display
Press the
Press the
VoIP-key to answer the call
VoIP-key to end the call
VoIP
VoIP
When you have a Skype subscription, the calling number if available
will be shown during a SkypeIn call.
Topcom Butler 4812 USB VoIP
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
Making a Skype call from the online buddy list:
The buddy list is your personal Skype contact list.
• Press the VoIP-key
• The Skype nickname is show on the display.
VoIP
•
•
Press the Up or Down key repeatedly to scroll through the on-line buddy list.
Press the OK-key to toggle between the Skype nickname and account ID name.
• Press the
• Press the
VoIP-key to start making the call
VoIP-key again to end the call
VoIP
VoIP
If the Skype nickname contains special characters the phone can’t display,
the account ID name will be shown instead.
Making a Skype call using speed-dial numbers
Make sure you have add speed dial numbers to your contacts/buddies.
• Enter the speed-dial number (0-99)
• Press the
VoIP-key to start making the call
VoIP
You can also store speed dial numbers into the phonebook (See ”4.14 The
Phone Book”).
Making a SkypeOUT call
To make skype out calls you have to buy Skypeout credits!!
• Enter the telephone number
• Press the
• Press the
VoIP-key
VoIP-key again to end the call
VoIP
VoIP
Redial one of the last 5 numbers dialled
• Press the Redial key .
• Select ‘PC OUT’ by the Up or Down key and press OK
• The number/skype nick name you last called appears on the display.
• Press the Redial key a few times until the desired number appears on the display.
•
Press the OK-key to toggle between the Skype nickname and account ID name.
• Press the Up key to see the date and time
• Press the VoIP-key to make the call
• The number shown on the display is dialled automatically.
VoIP
•
After finishing your call, press the VoIP key
to hang up.
VoIP
30
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
7.3.3 Interworking Skype calls and normal PSTN calls
This section describe the interworking between normal PSTN calls and Skype calls.
When you receive two calls at the same time (PSTN and PC call) the first call
will be showed on the display. You can answer one of both calls by pressing
the corresponding off-hook key.
During a conversation an incoming second call :
1) During normal PSTN conversation and incomming Skype call, the calling Skype nick name
will be showed on the display and an alert beep will be heard. The PC icon will blink on the
display:
• Press the line key to end the normal call and to answer the PC call:
The Handset will start to ring
Press the
VoIP-key to answer the PC call
VoIP
OR
• Press OK key to enter the menu.
Press the Up or Down key repeatedly until ‘SWITCH’ appears on the display and
press OK. The line will be switched to PC call and the PSTN call will be put on hold.
• To switch back to PSTN call, press OK key again -> select SWITCH and press OK
• To end both calls press the line or VoIP-key
•
VoIP
2) During Skype conversation and incomming PSTN call, the calling number (or name) will
be shown on the display if callerID is available.
• Press the
VoIP-key to end the Skype call and to answer the PSTN call:
VoIP
The Handset will start to ring
Press the line -key to answer the PSTN call
OR
• Press OK key to enter the menu.
Press the Up or Down key repeatedly until ‘SWITCH’ appears on the display and
press OK. The line will be switched to PSTN call and the PC call will be put on hold.
• To switch back to PC call, press OK key again -> select SWITCH and press OK
•
• To end both calls press the line or
VoIP-key
VoIP
7.3.4 The PC Call List
The calls received are stored in the skype program. The PC call list contains the missed calls
and received calls.
• Briefly press the Up key . Select ‘PC-IN’ by the Up or Down key and press OK.
• The nickname of the most recent caller appears on the display.
• Press the Up-key to show the net status and date/time
• The date and time the call was received are linked to each call.
• Briefly press the Down key to browse other numbers on the list.
Topcom Butler 4812 USB VoIP
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
•
•
•
If neither the Up or Down key
telephone will return to standby mode.
is pressed for 15 seconds, the
After a call is received, the number of the caller remains on the display
for 15 seconds after the last ring.
Caller ID is not available while you are on the line.
Calling a number from the Call List
• Briefly press the Up key . Select ‘PC-IN’ and press OK.
• Press the Down key to look up the desired call.
• Once the number is on the display, press the
symbols and ‘EXT’ appear on the display and the call timer starts.)
VoIP-key to make the call. (The
VoIP
7.3.5 Setting the Net status via handset
• Press the Programming key .
• Press the Up or Down key
• Press the OK.
• Press the Up or Down key
repeatedly until ‘NET STATUS’ appears on the display.
repeatedly to select the desired Net status
• Press OK to confirm.
• The currently Net status will appear on the display in standby
When setting the net status to ‘offline’ or ‘do not disturb’, the handset will
not ring during incoming Skype call.
7.3.6 Skype Voicemail access
To have voicemail you need to have voicemail subscription.
When you have voicemail subscription and you have received a new message, the
appears on the display.
-icon
You can also send a voicemail message to one of your skype buddies by the menu (outbox)
without calling them first.
Listen to your voicemail messages
• Press the Programming key .
• Press the Up or Down key
• Press the OK.
• Press the Up or Down key
repeatedly until ‘VOICE MAIL’ appears on the display.
repeatedly and select ‘INBOX’
•
Press OK to confirm and to enter the list of messages.
• Press to scroll through the list, or press to see the netstatus and date/time of the
message. New unread messages are shown with the -icon.
• Press the VoIP-key to listen to the message
VoIP
32
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
You can also enter the voicemail menu directly by pressing and holding the
‘1’ or -key.
Send a voicemail message directly
• Press the Programming key .
•
• Press the OK.
Press the Up or Down key
repeatedly until ‘VOICE MAIL’ appears on the display.
repeatedly and select ‘OUTBOX’
• Press the Up or Down key
• Press OK to confirm and to enter the list of all buddies
• Press the Up or Down key
voice message
repeatedly to scroll to the buddy you want to send a
• Press the
• To end the recording, press the
VoIP-key to start the recording
VoIP
VoIP-key again. To voicemail message will be send.
VoIP
7.4 SJ-Phone/Net2Phone interface
This section describes the operation under SJ-Phone/Net2Phone!
MAKE SURE YOU HAVE SELECTED ‘SJ-Phone’ or ‘Net2Phone in the Butler 4812 program:
7.4.1 Incoming call
• When you receive an incoming call the ‘EXT’ will blink together with the ‘PC’ logo to
indicate it’s a PC call.
• Press the
• To end the call press the line or
VoIP-key to answer the call
VoIP
VoIP-key
VoIP
7.4.2 Making a PC call
• Enter the telephone number you want to dial
Press the VoIP-key to dial out the number
VoIP-key
•
• To end the call press the line or
VoIP
VoIP
Topcom Butler 4812 USB VoIP
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
7.5 MSN Messenger interface
This section describes the operation under MSN Messenger !
MAKE SURE YOU HAVE SELECTED ‘MSN Messenger’ in the Butler 4812 program:
The interworking between MSN messenger and the telephone only works if
MSN messenger is opened and minimized in the application tray:
7.5.1 Incoming call
• When you receive an incoming only the PC screen will show that someone is calling
• Press the
• Press the Up or Down key
VoIP-key to enter the contact list
VoIP
repeatedly to scroll to the calling person and press the
VoIP-key
• To end the call press the line or
VoIP
VoIP-key
VoIP
7.5.2 Making a PC call
• Press the
• Press the Up or Down key
and press the VoIP-key
VoIP-key to enter the contact list
VoIP
repeatedly to scroll to contact person you want to call
VoIP
• To end the call press the line or
VoIP-key
VoIP
34
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
8 Trouble shooting
Symptom
Possible cause
Solution
No display
Batteries uncharged
Check the position of the
batteries
Recharge the batteries
Handset turned OFF
Turn ON the handset
No tone
The icon
Telephone cord badly
connected
Check the telephone
cord connection
The line is occupied
by another handset
Wait until the other handset
hangs up
Handset out of range
Bring the handset closer to the
base
flashes
The base has no power
supply
Check the mains connection
to the base
The handset is not
Register the handset to the
base
registered to the base
Base or handset
do not ring
The ringing volume is
zero or low
Adjust the ringing volume
Tone is good, but
there is no
The dialling mode is
wrong
Adjust the dialling mode
(pulse/tone)
communication
Telephone does not
react to pressing
the keys
Manipulation error
Remove the batteries and
but them back in place
Keypad lock ON
Wrong Flash time
Turn OFF the Keypad Lock
Change the flash time
Flash (R) Key does
not work
No audio for PC calls in The audio device for Speech is
Go to ‘Control panel’, and select
’Audio and sound devices’ ->
select ‘Speech’ -> make sure both
playback and voice recording are
set to ‘C-media USB headset’
the DECT phone
not set correct in Windows to
‘USB phone’ or ’C-media USB
headset’
The Skype application doesn’t use Open Skype and select ‘Tools’
the telephone as audio device
-> ‘Options’. At the ‘Privacy’
settings, select ‘manage other
programs access skype’ and
make sure only Butler 4812 is
shown in the list
Topcom Butler 4812 USB VoIP
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
The skype audio devices are not Open Skype and select ‘Tools’
set to the USB phone
-> ‘Options’. At the ‘Sound
devices’ settings, make sure all
are set to the ‘C-media USB
headset’
No PC sound anymore The audio device for Audio is not Go to ‘Control panel’, and select
when using other
applications
set correct in Windows to you PC ’Audio and sound devices’ ->
audio card
select ‘Audio’ -> make sure both
playback and recording are set to
your PC audio card
9 Technical characteristics
Standard:
DECT ( Digital Enhanced Cordless Telecommunications )
GAP ( Generic Access Profile )
1880 MHZ to 1900 MHz
120 duplex channels
GFSK
Frequency range:
Number of channels:
Modulation:
Speech coding:
Emission power:
Range:
32 kbit/s
10 mW ( average power per channel )
300 m in open space /50 m maximum inhouse
230 V / 50 Hz for the base
2 rechargeable batteries AAA, NiMh 600mAh
120 hours in standby
Base power supply:
Handset Batteries:
Handset autonomy:
Talk time:
13 hours
Charging time:
6-8 hours
Normal conditions of use: +5 °C to +45 °C
Dialling mode: Pulse / Tone
10 Topcom warranty
10.1 Warranty period
The Topcom units have a 24-month warranty period. The warranty period starts on the day the new unit
is purchased. The warranty on batteries is limited to 6 months after purchase. Consumables or defects
causing a negligible effect on operation or value of the equipment are not covered.
The warranty has to be proven by presentation of the original purchase receipt, on which the date of
purchase and the unit-model are indicated.
10.2 Warranty handling
A faulty unit needs to be returned to a Topcom service centre including a valid purchase note.
If the unit develops a fault during the warranty period, Topcom or its officially appointed service centre
will repair any defects caused by material or manufacturing faults free of charge.
Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging the faulty units
or parts of the faulty units. In case of replacement, colour and model can be different from the original
purchased unit.
The initial purchase date shall determine the start of the warranty period. The warranty period is not
extended if the unit is exchanged or repaired by Topcom or its appointed service centres.
36
Topcom Butler 4812 USB VoIP
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4812 USB VoIP
10.3 Warranty exclusions
Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-
original parts or accessories not recommended by Topcom are not covered by the warranty.
Topcom cordless phones are designed to work with rechargeable batteries only. The damage caused
by the use of non-rechargeable batteries is not covered under warranty.
The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor
any damage caused during transportation.
No warranty can be claimed if the serial number on the units has been changed, removed or rendered
illegible.
Any warranty claims will be invalid if the unit has been repaired, altered or modified by the buyer or by
unqualified, non-officially appointed Topcom service centres.
Topcom Butler 4812 USB VoIP
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
visit our website
U8006615
Download from Www.Somanuals.com. All Manuals Search And Download.
|