SbA760 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
0 Introduction.............................................................................................................................................................. 1
Unpacking and Warranty ............................................................................................................................... 1
Setup and Connections ................................................................................................................................. 1
1 Quick Start ............................................................................................................................................................... 2
2 Controls ................................................................................................................................................................... 3
Input L/Mono Input R ..................................................................................................................................... 3
Parallel Outputs L/R....................................................................................................................................... 3
Mid-High Outputs L/R .................................................................................................................................... 3
Level .............................................................................................................................................................. 3
Status Indicators ............................................................................................................................................ 4
Power Switch ................................................................................................................................................. 4
AC Fuse ........................................................................................................................................................ 4
AC Connector ................................................................................................................................................ 4
3 Cabling .................................................................................................................................................................... 5
4 Setup Example A ..................................................................................................................................................... 6
5 Setup Example B ..................................................................................................................................................... 7
6 Setup Example C..................................................................................................................................................... 8
7 Setup Example D..................................................................................................................................................... 9
8 Setup Example E ................................................................................................................................................... 10
9 Specifications .........................................................................................................................................................11
10 Dimensions...........................................................................................................................................................11
11 Block Diagram ..................................................................................................................................................... 12
Electro-Voice® SbA760 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOC
0. Introduction
Congratulations! In buying an Electro-Voice® SbA760 you decided on getting one of today’s most ad-
vanced active subwoofers incorporating sophisticated technology.
The active 15" subwoofer SbA760 with integrated 760 watt power amplifier has been specially designed to
provide fundamental bass support for professional full-range and multi-channel cabinets. Through the
integrated electronic frequency crossover of the SbA760 setting up an active stereo multi-channel system
is truly simple. The stereo audio signals for the mid-high range cabinets are provided via the MID-HIGH
outputs on the SbA760. Additionally provided are all connection facilities for using the SbA760 as active
mono subwoofer in active 2-way or “add-on operation”. Manufactured from baltic birch and housing a high-
performance Electro-Voice® EVS-15FR woofer, the SbA760 withstands even the hardest strain during
transport and operation. While input connection is also possible via phone type jacks, all input and output
signals are output via professional XLR-type connectors. The integrated High-Efficiency 760W power
amplifier optimally matches the EVS-15FR woofer offering highest dynamic and audio performance and
ensures at the same time that the EVS-15FR woofer is always operated in its optimum operation range.
Extensive protection circuitry like VCP, DC/HF-protection, audio limiter, Back-EMF protection and thermal
protection are employed to securely monitor the compliance to these operation limits guaranteeing that the
SbA760 provides outstanding performance even under most demanding conditions. The SbA760 is also
especially suitable for many rental applications. Compared to Class-AB-operated amps and because of
utilizing Class-H High-Efficiency technology the power amplifier produces significantly less power loss, and
additionally reduces thermal stress of all components. Employing fans to ensure thermal stability is not
necessary because of the Class-H technology and use of comprehensively dimensioned cooling profiles.
The enclosure is sealed with extremely durable Futura coating and a robust powder-coated steel grille
provides protection for the Electro-Voice® EVS-15FR woofer against mechanical damage. All controls and
the cooling profiles of the power amp module are recessed to provide optimum protection for the sensitive
parts of the SbA760 even during transportation. Two carrying handles, four castors and an integrated
threaded pole-mount stand flange allow comfortable transportation and optimum, space saving installation.
Because of its versatility, the SbA760 can be easily integrated into any existing sound reinforcement instal-
lation.
Unpacking and Warranty
Open the packing and carefully take out the SbA760. Remove the protective foil from the carrying handles.
A power cord and the warranty card are supplied in addition to this owner’s manual. Please make sure that
all details are filled in on the warranty card. Only a completely filled in warranty certificate entitles you to
stake any warranty claims. Therefore, keep the original invoice together with the warranty certificate at a
safe place.
Setup and Connections
Place the SbA760 on an even ground if possibly by using the supplied rubber feet to ensure safe opera-
tion. Make sure to check the stability of the system when using pole-mount stands. Do not cover the heat
sink on the subwoofer’s rear during operation. Otherwise, the SbA760 will enter protection mode because
of thermal overload. Although this provides reliable protection for the subwoofer, sound reproduction is
muted until the normal operation mode is regained. AC power is supplied via the Neutrik’s professional
“PowerCon” connector system and by use of an 15’ (5m) AC cord. This ensures an absolute secure and
reliable power supply connection. However, with large installations consisting of several active cabinets, the
use of high-quality AC distributors that allow high power consumption and offer reliable protection through-
out the entire system is strongly recommended.
Before establishing the AC connection for the first time, make sure that the SbA760’s operation
voltage setting, which can be found on a label next to the AC switch, corresponds to your local
AC voltage.
1
Electro-Voice® SbA760 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Quick Start
Caution: Before switching on the power of the SbA760 always set the LEVEL control to its
counterclockwise stop. A playing sound source could otherwise lead to extreme
output levels.
This Quick Start Manual outlines the set up and operation of a SbA760 used as add-on subwoofer together
with a Powermixer (see configuration examples). The operation procedures are equivalent for other
mixers.
1. Set up your Powermixer system as usual and connect a signal source to the power mixer (e.g. CD
Player or microphone).
2. Place your SbA760 somewhere between your full-range cabinets.
3. Set the SbA760’s LEVEL control to its counterclockwise stop and connect the unit to a wall outlet using
the supplied PowerCon mains cord.
4. Use a stereo phone plug cable to connect the Powermixer’s MONO OUT to the SbA760’s L/MONO
INPUT.
5. Move the Mixer MONO OUT fader all the way down.
6. Be sure to switch on the Mixer first and then the SbA760.
Switching on the SbA760 last is recommended. Otherwise, unwanted power-on noise might occur.
When switching off your equipment, please proceed in the opposite order, i.e. switch off the
SbA760 first.
7. Set the SbA760’s LEVEL control to its center position (0dB) and start the playback of the desired signal
audio source.
8. After adjusting the desired acoustic output level of the full-range cabinets using the Powermixer’s master
fader, establish volume setting for the subwoofer using the MONO OUT fader.
Electro-Voice® SbA760 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2
2. Controls
Input L/Mono, Input R
Electronically balanced inputs for the connection of high-
level signal sources such as mixers, signal
processors, etc. Establishing the connection is possible via
phone or XLR-type jacks. Balanced connection
is recommended to prevent noise or HF-interference.
Caution: Before connecting or disconnecting any plugs,
make sure to set the level control to its counterclockwise
stop, which prevents the system, the audience and yourself
from being stressed by nasty contact noise.
The input section of the SbA760 also allows mono sub
operation. The stereo signal is fed to the L and R inputs
and the low-frequency range signals of both channels are
summed prior to being processed in the power amplifier
section. All other applications use only the (L)/Mono input.
Please also refer to the chapter “SETUP EXAMPLES”.
Parallel Outputs L/R
Parallel connected to the main inputs these sockets are
used for “carrying through” the input signals.
Mid-High Outputs L/R
The input signal is split via the integrated electronic cross-
over. Low-frequency signals are routed to the internal
power amplifier of the SbA760 while high-frequency signals
are present at the Mid-High outputs for further distribution
to external power amps or active mid-high range cabinets.
Level
This control sets the output volume of the SbA760 in a
range between -∞dB and +10dB. The internal power
amplifier provides a nominal input sensitivity of +6dBu.
3
Electro-Voice® SbA760 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Status Indicators
These indicators provide information about the actual operational state of
the SbA760’s internal power amplifier.
Signal Indicates that an audio signal is present at the input and that it is
output.
Limit When lit this indicator signals that the internal power amplifier actu-
ally operated at the threshold of clipping. Short-term blinking is not critical,
because the amp’s audio limiter keeps distortion under control, so that the
sound is unaffected. Input overdrive, which results in sound degradation, is
a probable cause for a continuously lit indicator. To prevent this from
happening, reduce the input level.
VCP Lights when the power amplifier’s “Voice-Coil-Protection” is activated.
During dynamic peaks the integrated power amplifier is capable of produc-
ing output levels that exceed its stated nominal output capacity. Therefore,
the SbA760 employs a VCP circuit (Voice-Coil-Protection), which simulates
the thermal behavior of the speaker’s voice-coil, automatically reducing the
energy fed to the speaker system on the occurrence of thermal overload.
Protect Lights when one of the multiple comprehensive protections, e.g.
against thermal overload, HF, DC or Back-EMF of the power amplifier is
activated. Preventing the woofer from being damaged, it is shutoff via
relays in the protect mode. Additionally, the input level is being reduced.
During power-on the PROTECT LED lights for approximately 2 seconds,
which is normal. This only indicates that all protection circuitry has been
activated properly.
Power Switch
AC switch for switching the SbA760’s power ON or OFF. The switch lights after turning
the power ON. Make sure that the AC cord is correctly connected if the switch is not lit
upon turning the power on. If the AC cord is correctly connected and the AC switch does
not light upon power-on, please contact your local dealer.
Mains (AC) Fuse
During normal operation the mains (AC) fuse of the SbA760 only blows at the occur-
rence of a malfunction. Exchanging the fuse is only permissible using a fuse of the same
type (current, voltage and release characteristic). In case the fuse blows frequently,
please contact your local dealer.
Mains (AC) Out
This PowerCon mains (AC) out socket allows the connection of additional cabinets, e.g.
SxA360, using special cords (PC150 or PC800).
Mains (AC) In
Mains (AC) connection is established via a PowerCon connector. A 15’ (5m) long AC
cord with PowerCon plug is supplied.
CAUTION: TO PREVENT AC NETWORK OVERLOAD, CONNECTING MORE THAN THREE
SBA760 CABINETS TO A SINGLE MAINS (AC) OUTLET (10A-16A) IS NOT RECOMMENDED.
THIS APPLIANCE HAS NO USER-SERVICABLE PARTS INSIDE. LEAVE ANY SERVICING
AND MAINTENANCE QUALIFIED SERVICE TECHNICIANS ONLY.
Electro-Voice® SbA760 User Manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Cabling
LF-Cords
Using balanced cables with phone or XLR-type plugs for connecting signal sources to the SbA760 is
strongly recommended to prevent problems caused by noise interference. Make sure to mind the
pin-assignment as shown below.
2, SIGNAL +
XLR MALE
3, SIGNAL -
2, SIGNAL +
3, SIGNAL -
XLR FEMALE
SIGNAL -
SIGNAL +
SIGNAL +
The following illustration shows the most important cable connections and their pin-assignment.
A balanced wiring is to be preferred in each case.
Standard XLR-Cable
signal +
signal -
Cable connection phone to XLR-type, unbalanced
signal +
signal -
Cable connection phone to XLR-type, balanced
signal + signal -
Standard phone-type, unbalanced
signal +
signal -
Standard phone-type, balanced
signal + signal -
5
Electro-Voice® SbA760 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Setup Example A
Add-On Operation
The easiest way to expand your power mixer by means of a SbA760.
Electro-Voice® SbA760 User Manual
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Setup Example B
Stereo 2-way Active Operation with Mono Subwoofer
In this operation mode only the Mid/High signals are fed to the fullrange speaker cabinets, which allows
higher acoustic output levels.
7
Electro-Voice® SbA760 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Setup Example C
Stereo 2-way Active Operation with Stereo Subwoofer
The second SbA760 provides improved SPL in the bass range, in a full Stereo Setup.
Electro-Voice® SbA760 User Manual
8
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Setup Example D
Stereo 2-way Active PA-System
Using two SbA760’s to expand an existing fullrange-system, in a full Stereo Setup.
9
Electro-Voice® SbA760 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Setup Example E
PA-system with Active Components
SbA760 in combination with the SxA360, or other active cabinets.
Electro-Voice® SbA760 User Manual
10
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Specifications
Freq. Range (-10 dB): 42 Hz - 150 Hz
Amplifier Design: Hi-Efficiency Class H
Output Power: 760W (RMS)
Sensitivity (SPL 1W/1m): 100 dB
Max Calculated SPL: 128 dB
Components: EVS-15FR
Connectors: 2 XLR/Jack Combo Input
2 XLR Slave Through
2 XLR Mid-Hi Output
Level Control: +40 dB to -10 dB
Internal Crossover: PowerMax 12, 100 Hz
Cooling: Convection Cooled, Passive
Protection: Dynamic Limiter, DC, HF High
Temperature, Peak Current Limiter
Power Requirements: 100V, 120V, 230V, 240V
Cabinet: 18mm Baltic Birch Vented Enclosure,
4 Wheels, Pole Mount (M20), 2
Handles
Cabinet Finish: Futura
Grille: Black Powder-Coated Steel
Dimensions 23.7" x 16.9" x 22.0"/26.2"
(H x W x D/D w/Wheels): (603mm x 428mm x 558/665mm)
Net Weight: 94.7 lbs (43 kg)
10. Dimensions
11
Electro-Voice® SbA760 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Block Diagram
Electro-Voice® SbA760 User Manual
12
Download from Www.Somanuals.com. All Manuals Search And Download.
U.S.A. and Canada:
For customer orders, contact the Customer Service department at:
800/392-3497 Fax: 800/955-6831
For warranty repair or service information, contact the Service Repair Department at:
800/685-2606
For technical assistance, contact Technical Support at:
866/78-AUDIO
Specifications subject to change without notice.
All Other International Locations:
952-884-4051 Fax: 952-736-4212
Printed in U.S.A
© Telex Communications, Inc. 8/2004
Part Number 38110-392 Rev A
Electro-Voice® SbA760 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
|