User Manual
Phaser® 350
Color Printer
First printing March 1997
070-9682-01
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © Tektronix, Inc. Printed in the U.S.A. Unpublished rights reserved under the copyright laws of the
United States. Contents of this publication may not be reproduced in any form without permission of
Tektronix, Inc.
®
®
®
®
Tektronix , Phaser , ColorStix , and Made for Each Other are registered trademarks of Tektronix, Inc.
TekColor™, PhaserShare™, PhaserPrint™ and PhaserLink™ are trademarks of Tektronix, Inc.
®
®
®
®
®
®
IntelliSelect™ is a trademark, and Adobe , PostScript , ATM , Adobe Caslon, Adobe Garamond , Lithos ,
®
®
®
®
®
®
Trajan , Adobe Wood Type , Blackoak , Carta , Tekton and Poetica are registered trademarks of Adobe
Systems Incorporated which may be registered in certain jurisdictions. Adobe Brilliant Screens™ technology is
a trademark of Adobe Systems Incorporated or its subsidiaries and may be registered in certain jurisdictions.
Apple, Macintosh, and AppleTalk are registered trademarks, and QuickDraw is a trademark of Apple Computer
Incorporated.
Times™, Helvetica™, and Palatino™ are trademarks of Linotype-Hell AG and/ or its subsidiaries.
ITC Avant Guard Gothic, ITC Bookman, ITC Zapf Chancery and ITC Zapf Dingbats are registered trademarks of
International Typeface Corporation.
Kaufmann, Americana and Park Avenue are registered trademarks of Kingsley/ ATF Type Corporation.
Barmeno is a trademark and Formata is a registered trademark of H. Berthold AG.
®
Windows is a registered trademark of Microsoft Corporation.
®
®
Novell NetWare is a registered trademark of Novell, Inc.
®
UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/ Open
Company Ltd.
®
PCL is a registered trademark of Hewlett-Packard Corporation.
®
PANTONE Colors generated by the Phaser 350 Color Printer are four- and/ or three-color process simulations
and may not match PANTONE-identified solid color standards. Use current PANTONE Color Reference
Manuals for accurate colors.
PANTONE Color simulations are only obtainable on these products when driven by qualified Pantone-licensed
software packages. Contact Pantone, Inc. for a current list of qualified licensees. © Pantone, Inc., 1988.
All trademarks noted herein are either the property of Tektronix, Inc., Pantone, Inc., or their respective
companies.
The method of printing employed by Tektronix Phaser® 350 Color Printer is covered by U. S. Patent No.
5,372,852. Purchase of a Tektronix Phaser 350 Color Printer provides a purchaser with a license under claims
1, 3, 20, and 22 of the '852 patent, but not a license under other claims of that patent, which cover methods of
printing using inks having specific properties. Use of solid-ink sticks — manufactured by any other party and
having these specific properties — with a Tektronix Phaser 350 Color Printer is not licensed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Phaser® 350 Warranty
Tektronix warrants that the Phaser 350 will be free from defects in materials and workmanship for a period of
one (1) year from the date of shipment and that the Maintenance Cartridge in the Phaser 350 will be free from
defects in materials and workmanship for a period of ninety (90) days from the date of shipment or six months
where longer periods are required by law. If the Phaser 350 or its Maintenance Cartridge proves defective
during their respective warranty periods, Tektronix, at its option, will either repair the defective product
without charge for parts and labor, or provide a replacement in exchange for the defective product.
This warranty applies only to products returned to the designated Tektronix depot or the Tektronix authorized
representative from which the product was originally purchased. For products returned to other locations,
Customer will be assessed the applicable service charge. The above limitation shall not apply within the
European Economic Area, where products may be returned for warranty service to the nearest designated
service depot regardless of the place of purchase.
In order to obtain service under this warranty, Customer must provide the applicable office of Tektronix or its
authorized representative with notice of the defect before the expiration of the warranty period and make
suitable arrangements for the performance of service. Customer shall be responsible for packaging and
shipping the defective product to the service center designated by Tektronix or its representative, with shipping
charges prepaid. Tektronix or its representative shall pay for the return of the product to Customer. Customer
shall be responsible for paying any associated taxes or duties.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or
inadequate maintenance and care. Tektronix shall not be obligated to furnish service under this warranty:
a. to repair damage resulting from attempts by personnel other than Tektronix representatives to
install, repair or service the product;
b. to repair damage resulting from improper use or connection to incompatible equipment;
c. to repair any damage or malfunction caused by the use of non-Tektronix supplies or consumables;
d. to repair a product that has been modified or integrated with other products when the effect of such
modification or integration increases the time or difficulty of servicing the product;
e. to repair damage or malfunction resulting from failure to perform user maintenance and cleaning at
the frequency and as prescribed in the user manual; or
f. to repair this product after the limit of its duty cycle of 20,000 pages per month has been reached; all
service thereafter shall be billed on a time and material basis.
THE ABOVE WARRANTIES ARE GIVEN BY TEKTRONIX WITH RESPECT TO THIS PRODUCT IN LIEU OF
ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TEKTRONIX' RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND
EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX
AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS
ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
Download from Www.Somanuals.com. All Manuals Search And Download.
Users safety summary
Terms in manual:
CAUTION
Conditions that can result in damage to the product.
WARNING Conditions that can result in personal injury or loss of life.
Power source: Do not apply more than 250 volts RMS between the supply conductors or between either supply
conductor and ground. Use only the specified power cord and connector. Refer to a qualified service technician
for changes to the cord or connector.
Operation of product: Avoid electric shock by contacting a qualified service technician to replace fuses inside the
product. Do not operate without the covers and panels properly installed. Do not operate in an atmosphere of
explosive gases.
WARNING Turning the power off using the On/ Off switch does not de-energize the
printer. You must remove the power cord to disconnect the printer from the
mains. Keep the power cord accessible for removal in case of an emergency.
Safety instructions: Read all installation instructions carefully before you plug the product into a power source.
Terms on product: CAUTION
A personal injury hazard exists that may not be apparent. For example, a
panel may cover the hazardous area. Also applies to a hazard to property
including the product itself.
DANGER
A personal injury hazard exists in the area where you see the sign.
Care of product: Disconnect the power plug by pulling the plug, not the cord. Disconnect the power plug if the
power cord or plug is frayed or otherwise damaged, if you spill anything into the case, if product is exposed to
any excess moisture, if product is dropped or damaged, if you suspect that the product needs servicing or repair,
and whenever you clean the product.
Ground the product: Plug the three-wire power cord (with grounding prong) into grounded AC outlets only. If
necessary, contact a licensed electrician to install a properly grounded outlet.
Symbols as marked on product:
DANGER high voltage:
Protective ground (earth) terminal:
Use caution. Refer to the manual(s) for information:
!
WARNING: If the product loses the ground connection, usage of knobs and controls (and other conductive parts)
can cause an electrical shock. Electrical product may be hazardous if misused.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1
Introduction
Overview 1-1
Information roadmap 1-4
2
Getting Set Up
At a glance 2-1
Setting up the printer 2-2
What you get with your printer 2-2
Optional accessories 2-4
Touring the printer 2-6
Registering the printer 2-7
Removing the packing material 2-7
Installing the optional Lower Paper Tray Assembly 2-7
Unlocking the transit restraint 2-10
Installing the maintenance tray 2-11
Loading ink sticks 2-13
Selecting a media tray configuration 2-14
Loading media trays 2-15
Connecting the printer 2-20
Printer ports 2-20
PhaserShare network and serial connections 2-22
Parallel connection 2-23
SCSI peripheral devices 2-24
Turning on the printer 2-25
As the printer warms up 2-26
Front panel controls 2-27
Accessing the front panel menu 2-27
Selecting a language for the front panel 2-28
Help Pages overview 2-29
Installing the printer’s software 2-30
PC/ Windows software 2-31
Macintosh software 2-52
Workstation software 2-61
User Manual
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Printing from different platforms 3-1
Printing from a PC 3-2
Printing from a Macintosh 3-14
Printing from a workstation 3-20
Printing from specific applications 3-23
General hints and tips 3-23
Windows applications 3-23
Macintosh applications 3-24
Selecting print features 3-25
Print quality modes 3-27
Color corrections 3-28
All about media 3-29
Media size and weight 3-30
Margins and image area 3-31
Media and ink handling tips 3-32
Media trays 3-33
Establishing a default media tray (optional) 3-34
Printing letterhead 3-35
Printing transparencies 3-36
Transparency quality tips 3-37
Manual feed printing 3-38
Printer languages: PostScript, HP-GL, PCL5 3-40
Fonts 3-41
Resident typefaces (PostScript) 3-41
Printer’s Extended Features option 3-42
Resident typefaces (PCL5) 3-43
Downloading fonts 3-43
Macintosh screen fonts 3-44
Using fonts with Windows 3-45
Printing font samplers 3-45
viii
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Printing: Beyond the Basics
Working with color 4-2
TekColor corrections — making the best selection 4-3
Deciding which color correction to use 4-4
Color correction descriptions 4-6
Special considerations 4-9
Printing and using the color sampler charts 4-10
Using the Quick Collate option 4-12
Quick Collate and the Check Print option 4-13
Previewing with Check Print 4-14
Using Image Smoothing 4-16
5
Caring for Your Printer
Overview 5-1
Adding ink 5-2
Ink handling tips 5-3
Emptying the waste tray 5-4
Replacing the maintenance tray 5-7
Cleaning the printer 5-9
Cleaning pages 5-9
Cleaning supplies 5-10
Reordering cleaning kit supplies 5-11
Using isopropyl alcohol 5-12
Identifying cleaning solutions 5-13
Cleaning for light stripes: printhead 5-14
Cleaning for ink smears and transfix problems: internal paper path 5-17
Cleaning for jams and ink smears: paper-feed rollers 5-19
Cleaning for ink smears: paper-exit path 5-25
Cleaning for upper media tray jams: media-pick roller 5-30
Cleaning for lower tray jams: paper-pick rollers 5-35
Moving Your Printer 5-36
Waiting 30 minutes before moving 5-36
Removing the maintenance tray 5-36
Locking the transit restraint 5-37
Changing line voltage 5-38
User Manual
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
If you need help 6-1
Using the automated fax systems 6-2
Front panel messages 6-3
Problems and solutions 6-6
All about media jams 6-14
Locating jammed media 6-15
Removing jammed media 6-16
Improving print speed 6-18
If your file doesn’t print 6-21
General things to check for 6-21
If you are using PC/ NFS 6-23
If you can’t print from Windows to an LPT port 6-23
Check the printer’s language mode 6-25
PostScript printing errors 6-26
Using a PostScript error handler 6-27
Fixing timeout problems in Windows 6-29
Printed colors are not what you expected 6-32
In general 6-32
Printing PANTONE Colors 6-33
Blue colors look too purple 6-33
Using the Tektronix halftone screens 6-34
Selecting page sizes in Windows applications 6-36
Fonts printing incorrectly from Windows 6-38
Sharing the printer on a network 6-39
Driver, utility files, and front panel interactions 6-39
If the LaserWriter Utility does not work 6-40
If you are using PC/ NFS and Windows 3.1 6-40
x
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Using the Front Panel
Front panel overview 7-1
Front panel indicators 7-1
Front panel buttons 7-2
Two-line display 7-3
Enabling and disabling the front panel menu 7-4
Front panel menu map 7-5
Printer Help Pages 7-6
Printing the help pages 7-7
Printer standby modes 7-8
Selecting the cleaning page source 7-9
8
Supplies, Accessories, and Expanding your System
Tektronix supplies: the mark of quality 8-1
Customizing your printer 8-1
Ordering printer supplies 8-2
Interface cables and adapters 8-3
Extended Features upgrade 8-4
Optional Lower Paper Tray Assembly 8-5
Optional media trays 8-6
Benefits of multiple media trays 8-6
Memory upgrade 8-7
Font upgrade 8-7
600 x 300 dpi upgrade 8-7
PhaserShare network cards 8-8
Benefits of networking the printer 8-8
Phaser Copystation 8-9
PhaserPrint 8-9
PhaserSym 8-10
SCSI hard disk 8-10
User Manual
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Regulatory Information and Specifications
Declaration of conformity 9-1
Canadian EMC (Electromagnetic Compatibility)
regulatory standards 9-2
FCC Class B warning (for 115 VAC equipment) 9-2
Material Safety Data Sheets 9-3
MSDS for ColorStix ink sticks 9-4
MSDS for silicone oil 9-6
Specifications 9-8
Safety and emissions 9-9
Index
xii
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
1
Introduction
Overview
The Tektronix Phaser® 350 Color Printer uses Tektronix’ solid ink-jet
technology. Solid ink-jet refers to the melting of the solid inks inside the
printer which then resolidify quickly as the image is transferred onto paper.
The ink hardens so rapidly that it does not have time to bleed into the paper,
so the printed colors remain brilliant and well-defined.
The Phaser 350 printer produces laser-quality color prints on Letter-size and
A4-size paper, transparency and peel-off label media. With a print speed of
up to six pages-per-minute on paper and two pages-per-minute on
transparencies, the printer is well suited to workgroup printing
environments.
For paper printing, the printer accepts common office paper ranging
from 16 to 32 lbs. (60 to 120 g/ m2). Using the printer’s manual feed
capability, you can print on non-glossy cover stock ranging from 50 to 80 lbs.
(135 to 220 g/ m2). For transparency printing, use Tektronix premium
transparencies for enhanced ink adhesion and superior print quality.
In its standard configuration, the printer provides 300 x 300 dots-per-inch
(dpi) resolution color printing, 8 Mbytes of memory and a total of 17 fonts.
Adding the Extended Features option increases print resolution and print
performance, making it the choice for larger workgroups. The Extended
Features option adds 600 x 300 dpi resolution printing, 24 Mbytes of
memory, job collation and Check Print features, and a total of 69 fonts.
Additional memory improves the printer’s performance by offloading your
computer faster, improving processing speeds, allowing job pipelining, and
providing storage for more downloadable fonts.
User Manual
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Options and Accessories. The printer can be upgraded with a variety of
accessories to expand its capabilities. A 500-sheet Lower Paper Tray
Assembly increases print capacity for high-demand printing environments.
Optional Letter- and A4-size transparency trays make it possible to print on
paper and transparency media without changing trays. Network options
make the printer a fast, sharable printing resource.
Network printing. The printer works with PCs, Macintosh computers, and
Unix and VMS workstations, making it a resource that can be shared in
mixed environments. You can connect the printer to one host or several
hosts because it supports simultaneously active interface ports. In addition
to its standard bidirectional parallel port, optional PhaserShare network
interface cards provide Ethernet, Token Ring and LocalTalk/ serial
connectivity. Automatic port and protocol sensing and switching makes the
printer accessible in mixed network environments.
Language support. Using the Phaser 350 printer, you can make color prints
from a variety of software applications, since it incorporates Adobe’s
PostScript Level 2 software. The printer accepts Hewlett-Packard Graphics
Language (HP-GL) files. Support for monochrome PCL5 (Printer Command
Language) files is optionally available. The printer can automatically switch
between all three supported languages: PostScript, HP-GL, and PCL5.
Font support. The printer accepts Adobe Type 1 and Type 3 downloadable
fonts, TrueType fonts, PCL5, and a variety of user-defined fonts. To extend
font capacity, the printer supports a SCSI-connected external hard disk for
storage of additional fonts.
Color corrections. TekColor™ Correction provides several user-selectable
color correction modes that let you optimize your color prints.
Print quality modes. The printer provides three print-quality modes that let
you balance print requirements between speed and quality.
■
■
■
Fast Color mode for good print quality at 6 pages per minute.
Standard mode for better print quality at 4 pages per minute.
*Enhanced (600 x 300) mode for the best text and image quality at
2 pages per minute.
* Requires the printer’s Extended Features option.
1-2
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
PhaserLink software printer control and information access. PhaserLink™
software provides a breakthrough in printer control and information access.
Rather than use vendor-proprietary, printer-specific, and platform-specific
management utilities, PhaserLink software provides this function using
HTTP (HyperText Transfer Protocol, the basis for World Wide Web
browsers). This allows you to use a standard web browser to view printer
status, control printer configuration, and link to online documentation via
the World Wide Web.
Note
To use PhaserLink software, the printer must be connected to a
network running TCP/IP. Refer to the PhaserShare Network
Cards and Software System Administrator Manual for
complete details.
Easy to use and maintain. Designed for the business office environment, the
Phaser 350 printer is a fast, easy-to-use printer. When the printer is low on
ink, you just drop in Tektronix ColorStix® solid-ink sticks and continue
printing. Each ColorStix solid-ink stick has a unique color and shape to
simplify loading.
To order ColorStix solid-ink sticks, transparencies, paper or other supplies,
refer to the supplies information sheet that is shipped with the printer and
contact your local dealer or, in the United States and Canada, call Tektronix
at 1-800-835-6100.
User Manual
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Information roadmap
Tektronix provides information on the Phaser 350 printer in several ways:
User Manual
The Phaser 350 Color Printer User Manual (this manual) includes information
on setting up and using the printer:
■
■
■
■
Hardware and software set up
Selecting print features in a driver
Caring for your printer
Maintaining print quality and troubleshooting
Diskettes
The printer’s diskettes contain printer drivers, printer description files, color
sampler charts, and utility files.
CD-ROM
The printer’s CD-ROM contains the contents of this user manual, as well as
supplemental information, in Adobe® Acrobat® (PDF) format:
■
■
■
■
Using the printer’s downloadable utility files
Printing HP-GL and PCL5 files
Printing from workstations
Using PANTONE Colors
For instructions on installing and using the Adobe Acrobat Reader to view
PDF files, refer to the README files on the CD-ROM.
World Wide Web
If you have access to the Internet, you can view documentation topics and
answers to Frequently Asked Questions available at Tektronix’ web site:
http://www.tek.com/Color_Printers/userdoc/introduction.html
1-4
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
2
Getting Set Up
At a glance
Installation of your printer involves these tasks:
1. Setting up the printer (page 2-2).
Putting all the pieces together: unpacking the printer and accessories,
optional Phaser CopyStation, loading the media tray(s), loading ink
sticks, and installing the maintenance tray.
Note
For instructions on installing a SCSI hard disk for font storage
and print collation, refer to the printer’s CD-ROM.
2. Connecting the power and interface cables (page 2-20).
3. Selecting a language for the front panel (page 2-28).
4. Installing printer driver software on your computer (page 2-30).
Using the Printer Software diskettes or the printer’s CD-ROM
to install software, for example, drivers, PostScript Printer
Description (PPD) files and utility files, on a Macintosh, or a PC
running Windows 95, Windows 3.1, or Windows NT.
Caution
To ensure proper printer operation, install the printer on a flat
surface having no more than 3 degrees of tilt. This is
approximately equivalent to lifting one side of the printer 2 cm
(0.75 inches) off of a flat surface.
User Manual
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Setting up the printer
What you get with your printer
The printer and its basic accessories are shipped in a single box. If you
ordered an optional Lower Paper Tray Assembly or Phaser Copystation,
each is shipped separately.
The following items are shipped with the printer:
1. Quick-Start Installation guide
2. Phaser 350 printer ColorStix ink starter pack
3. Paper tray (Letter- or A4-size)
4. Power cord
5. Maintenance tray
6. Cleaning kit
7. TekColor Care envelope (includes the registration card)
8. Phaser 350 Color Printer User Manual
9. Phaser 350 printer Media Sampler
10. Phaser 350 printer driver software (CD-ROM and diskettes)
11. PhaserShare Network User Manuals and diskettes (optional)
12. Parallel cable adapter
See “Interface cables and adapters” on page 8-3 for additional information
on interface cables and adapters.
2-2
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
3
2
1
350
™
Quick-Start
InstaPllhaatsieor n
5
4
6
Cleaning
Kit
7
8
Care
™
9
User
Manual
ekColor
T
Information
Envelope
Media Sampler
10
11
12
PhaserShare
Manuals
9682-01A
User Manual
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Optional accessories
When you order one of the printer’s optional accessories, each is shipped
separately in its own box. For information on ordering optional accessories,
refer to Chapter 8.
1. Lower Paper Tray Assembly (recommended). With a 500-sheet
capacity, the Lower Paper Tray Assembly transforms the printer
into a high-volume printing solution for networked environments.
Dual-tray printing capability is especially useful if you commonly
print on several types of media, for example, office paper in the
lower tray, and transparencies, letterhead, or label media in the
upper tray.
2. Phaser Copystation. The Phaser Copystation adds easy-to-use,
walk-up color copying capability to the printer. Its front-panel
controls let you specify the number of copies and select among
color, gray scale and black-and-white copying modes. You can
choose to make copies reduced to 25% or enlarged to 200% of the
original’s size, and you can adjust copies for color balance and
lightness.
3. Transparency tray (recommended). If you often print transparencies,
you can save time and effort by purchasing an optional
transparency tray dedicated for printing transparencies.
Using both paper and transparency trays, you can conveniently
print on several types of media by simply swapping trays. There
is no need to load and unload trays when changing between
media types.
4. SCSI disk for collation. When you add a 1.2 Gigabyte external SCSI
hard disk to a Phaser 350 printer with the Extended Features
option, you can take advantage of the printer’s Quick Collate
feature. This specific SCSI drive is available from Tektronix; refer
to Chapter 8 for ordering information. Quick Collate performs
document collation in the printer, which is faster than the collation
feature that exists in some applications. For more information,
refer to “Using the Quick Collate option” on page 4-12.
2-4
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
1
2
3
Phaser CopyStation
4
9101-70b
User Manual
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Touring the printer
Use the following illustration to familiarize yourself with the printer.
1. Front cover release button
2. Front panel menu display and buttons
3. Exit cover
4. Exit cover release button
5. Ink loading bins (under top cover)
6. Top cover release button
7. On/ Off switch and access to I/ O ports
8. Transit restraint
9. Media tray
10. Front cover
11. Maintenance tray
5
3
2
1
6
4
7
11
8
10
9
9101-59
2-6
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Registering the printer
The TekColor Care information envelope contains your TekColor Care
registration card.
1. Find the registration card that is appropriate for you
(U. S. or international versions).
2. Fill out the registration card and mail it.
By registering your printer with Tektronix, you are validating the product
warranty and you are ensuring that you will be sent information about
upgrades, service, and accessories as it becomes available.
Removing the packing material
Remove the plastic bag and packing materials surrounding the printer.
Note
Save all boxes and packing material in case you need to ship the
printer later.
Installing the optional Lower Paper Tray Assembly
An optional Lower Paper Tray Assembly for paper printing is available as an
option (Tektronix order number Z340LTA). With a 500-sheet capacity, the
Lower Paper Tray Assembly enables the printer to be used as a high-volume
printing solution for networked environments.
Using the optional Lower Paper Tray Assembly, you can configure the
printer for dual-tray printing capability. Two trays are especially useful if
you commonly print on several types of media, for example office paper in
the lower tray and transparencies, letterhead, or label media in the upper
tray.
Caution
To avoid damaging the printer, let the printer cool down for at
least 30 minutes before you begin installing a Lower Paper
Tray Assembly. This provides sufficient time for the melted ink
to solidify.
User Manual
2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Warning The printer is not permanently attached to the Lower Paper
Tray Assembly. When moving the printer, first disconnect it
from the Lower Paper Tray Assembly and then move each unit
separately. Moving the printer incorrectly may cause damage
or personal injury.
The printer weighs about 32 kg (70 lbs.). Do not attempt to lift
the printer without the assistance of another person.
9101-57
Install the Lower Paper Tray Assembly using these steps:
1. Remove the tray from the Lower Paper Tray Assembly. Remove
the shipping block from the tray and replace the tray in the Lower
Paper Tray Assembly.
2. Place the printer on top of the Lower Paper Tray Assembly.
Note
To ensure proper printer operation, install the printer and Lower
Paper Tray Assembly on a flat surface having no more than 3
degrees of tilt. This is approximately equivalent to lifting one side
of the printer 2 cm (0.75 inches) off of a flat surface.
2-8
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
3. Make sure that the left and right alignment pins fit in the holes in
the base of the printer.
4. Plug the Lower Paper Tray Assembly cable into the printer.
2
2
4
3
9101-02
To move the printer more than a few feet, it is easier to disconnect the Lower
Paper Tray Assembly and move the printer separately from the Lower Paper
Tray Assembly.
Caution
To avoid damaging the printer, let the printer cool down for at
least 30 minutes before you move it so that the ink has time to
solidify.
User Manual
2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Unlocking the transit restraint
Caution
To avoid damaging the printer, always turn the printer power
off using the On/Off switch before locking or unlocking the
transit restraint.
1. Turn the printer power off using the rear-panel On/Off switch.
2. The transit restraint lock is located on the right side of the printer.
Insert a wide flat-blade screwdriver into the lock slot.
3. While pushing inward with slight pressure, turn the lock button
counterclockwise until it springs out flush with the side of the
printer.
3
2
9101-03
Caution
If you move or ship the printer, be sure to lock the transit
restraint to protect the printhead from damage. Refer to
“Moving Your Printer” on page 5-39 for more information.
2-10
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Installing the maintenance tray
The printer is shipped with a maintenance tray that must be installed before
printing is possible. The front panel displays a message telling you when
the maintenance tray is low, allowing you to make a limited number of
prints before the tray is depleted. To avoid printing delays, always keep an
extra maintenance tray available for use in the printer.
Note
When you reorder a replacement maintenance tray for the printer,
use Tektronix order number 436-0294-03.
1. Open the front cover.
9101-65
2. Open the maintenance tray shipping box and remove the
maintenance tray.
User Manual
2-11
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
3. Remove the packing materials from the maintenance tray. Retain
the plastic bag for disposal of the used maintenance tray.
4. Install the maintenance tray by sliding it into the printer.
9101-37
Note
To prevent jams at the media tray, be sure to push the
maintenance tray into the printer until both sides latch firmly
into place.
5. Close the front cover.
If you move or ship the printer, be sure to remove the
Caution
maintenance tray to protect the printer from damage. Refer to
“Moving Your Printer” on page 5-39 for more information.
2-12
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Loading ink sticks
The printer’s standard accessories include a box containing one of each color
Phaser 350 ColorStix® solid ink sticks: cyan, magenta, yellow and black.
You’ll need to load the box of ink sticks during printer set up. To ensure that
your printer is always available for use, Tektronix recommends that you
immediately reorder and maintain a stock of each color ink stick. Refer to
“Ordering printer supplies” on page 8-2 for ordering information.
Note
To ensure optimum printing performance and best ink economy,
leave the printer turned on overnight and during weekends.
1. Open the top cover.
2. Drop the appropriate color Phaser 350 ColorStix ink stick into each
ink loading bin. Ink sticks are uniquely shaped to fit into the
correct ink-loading bin.
1
2
9101-21
3. After loading the appropriate color ink stick, close the top cover.
User Manual
2-13
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Selecting a media tray configuration
If you print on different types of media (paper and transparencies, letterhead
or label stock) or different media sizes (U.S/ Letter and Metric/ A4), you’ll
want to obtain a media tray for each type of media you use. For
transparency printing, the optional transparency tray is recommended.
The standard paper tray shipped with your printer accepts Letter-size paper
and label stock. An optional A4-size paper tray supports A4-size paper and
label stock printing. Optional transparency trays can be ordered for Letter-
and A4-size transparency media. An optional Lower Paper Tray Assembly
for high-volume printing can be ordered for Letter- and A4-size paper only.
Refer to “Optional media trays” on page 8-6 for ordering information.
Office paper, letterhead, and label printing
Standard paper tray: Use the standard 200-sheet paper tray shipped with
your printer for paper, letterhead, and label stock print jobs.
Optional Lower Paper Tray Assembly: In workgroup printing
environments, you’ll want to add the optional 500-sheet Lower Paper Tray
Assembly to supplement the standard paper tray. The Lower Paper Tray is
also convenient when you want to print on paper (lower tray) and another
media, such as transparency, letterhead, or label stock (upper tray). With
dual-tray capability, you can print on different media directly from the
printer driver without the need to leave your computer to switch trays.
Note
The Lower Paper Tray Assembly supports printing on paper only.
Transparency printing
Transparency tray: If you often print transparencies, you can save time and
effort by purchasing an optional transparency tray dedicated for printing
transparencies. Using both paper and transparency trays, you can easily
print on several types of media by simply swapping trays. There is no need
to load and unload trays when changing between media types.
2-14
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
When you add the Lower Paper Tray Assembly to the printer, you can select
between paper printing (lower tray) and transparency printing (upper tray)
directly from the printer driver without leaving your computer. Refer to
“Optional media trays” on page 8-6 for ordering information.
Standard paper tray: You can use the standard paper tray to print on
transparencies. However, when you print you’ll need to follow these
instructions:
a. Select Transparency as the Media Source in the Tektronix
printer driver.
b. When the printer’s front panel message prompts you, load the
transparency media, confirm your action using the front panel,
and continue printing.
c. When printing is completed, remove the extra transparency
media from the paper tray and replace paper media.
Loading media trays
The standard tray shipped with the printer accepts common office
Letter-size (8.5 x 11 in.) paper ranging from 16 to 32 lbs. (60 to 120 g/ m2).
An optional A4-size (210 x 297 mm) paper tray supports printing on
common office A4-size paper. Optional transparency trays are also available
for Letter- size and A4-size transparency printing.
The optional Lower Paper Tray Assembly can be ordered with either a
Letter- or an A4-size paper tray for printing on paper ranging from
16 to 32 lbs. (60 to 120 g/ m2). For more information about media types,
refer to “All about media” on page 3-29.
Note
Samples of paper and transparency media are included in the
Media Sampler kit shipped with the printer.
User Manual
2-15
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Loading paper and transparency trays
1. Prior to loading paper in a tray, fan the paper to release sheets that
are stuck together.
Note
Handle transparencies by the edges and with both hands to avoid
fingerprints and creases, which can result in poor print quality.
2. If you are loading paper in the standard paper tray, load up to 200
sheets of common office paper (slightly less than one-half ream).
If you are loading transparencies in the standard paper tray, load
up to 50 transparency sheets.
3. If you are loading transparencies in the transparency tray, load up
to three boxes (a total of 175 sheets) of transparency media. If you
are using Tektronix premium transparency media, position the
transparency notch in the back, right corner of the tray. Standard
Tektronix transparencies can be loaded in any orientation.
Make sure that the media fits snugly against the inside front wall of the tray.
A label on the inside of the paper and transparency trays provide a fill line to
indicate the tray’s maximum capacity.
1
2
3
9101-04b
2-16
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
4. Insert the media tray into the printer.
9101-73
Loading the Lower Paper Tray Assembly
The Lower Paper Tray Assembly holds up to 500 sheets of paper. A label on
the inside of the tray provides a fill line to indicate the tray’s maximum
paper capacity.
Note
The Lower Paper Tray Assembly accepts paper media only; it
should not be used with transparencies or label stock.
User Manual
2-17
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
1. Load one-half of a ream (250 sheets or less) of paper at a time.
2. Prior to loading paper in the Lower Paper Tray Assembly, fan the
paper stack to release sheets that are stuck together.
1
2
1⁄2
9101-56
3. Load the first stack of paper in the tray. Make sure that the paper
fits snugly against the inside front wall of the tray.
1
⁄2
+
1
⁄2
!
9101-55
4. Load the second stack of paper. Make sure that the paper fits flat
in the tray.
2-18
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
5. Insert the paper tray into the Lower Paper Tray Assembly.
9101-74
User Manual
2-19
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Connecting the printer
Printer ports
The printer can support one optional PhaserShare™ network card; refer to
the description for number 1. The printer is shipped with a parallel port
available on the rear panel; refer to the description for number 2. A SCSI
port is also included on the printer’s rear panel; refer to the description for
number 3.
Note
See “Interface cables and adapters” on page 8-3 about ordering
cables for connecting the printer.
All ports and network protocols are simultaneously active. The printer
accepts print jobs on a first-come, first-served basis.
Ethernet®
PHASER 340
1
2
S
e
r
v
i
c
e
R
e
s
e
t
Second
Feeder
115
SCSI Disk
Parallel
Service
Only
Ethernet®
PHASER 350
1
2
Service Reset
Second
Feeder
SCSI Disk
Parallel
Service
Only
1
3
2
9682-02
2-20
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
1. PhaserShare card (optional)
The printer accepts one of the following:
■
■
■
PhaserShare Ethernet card supporting Novell NetWare, EtherTalk,
TCP/ IP, Telnet and FTP protocols.
PhaserShare Token Ring card supporting Novell NetWare, TCP/ IP,
TokenTalk, Telnet and FTP protocols.
PhaserShare LocalTalk/ serial card.
The PhaserShare Network Cards and Software System Administrator
Manual contains all the information necessary for configuring and
using the optional network interfaces. Refer to “PhaserShare
network cards” on page 8-8 for ordering information.
2. Parallel (standard)
If needed, the parallel port can be configured for bi-directional
communications. Refer to the on-line manual on the printer’s
CD-ROM for instructions on using utility files to control the
parallel port. The CD-ROM also covers other topics such as
disabling timeouts, bi-directional status reporting and the parallel
port pinout.
3. SCSI (standard)
The SCSI port is used only for connecting an external hard disk or
for connecting the Phaser Copystation. Refer to “SCSI peripheral
devices” on page 2-24 for more information on the SCSI port.
Refer to “Phaser Copystation” on page 8-9 for more information
on the Phaser Copystation.
Note
Make all printer connections before you turn on the printer.
User Manual
2-21
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
PhaserShare network and serial connections
Optional PhaserShare cards provide Ethernet, Token Ring, or
LocalTalk/ serial connections for the printer. PhaserShare cards can be
purchased initially with the printer as an installed option or later as a
separate upgrade kit. If purchased initially, you will find the PhaserShare
network manuals included in the shipping box with your printer. If you
purchased a PhaserShare card as an upgrade kit, install the card using the
directions provided with the upgrade kit.
PhaserShare network interfaces offer high performance and flexible
workgroup connectivity. All data input ports and network protocols are
simultaneously active. Print jobs are processed on a first-come, first-served
basis.
The PhaserShare Network Cards and Software System Administrator Manual
contains all the information necessary for configuring and using the optional
network interfaces. For ordering information, refer to Chapter 8. Refer to
“Interface cables and adapters” on page 8-3 for information on ordering
serial cables.
2-22
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Parallel connection
The printer supports a standard (uni-directional) parallel port. The parallel
port can also be set for bi-directional communications using downloadable
utility files or from your World Wide Web browser. Refer to the printer’s
CD-ROM or the PhaserShare Network Cards and Software System Administrator
Manual, respectively, for information on changing parallel communications.
Connect to the printer’s parallel port using the high-density bi-directional
parallel cable included with your printer. This cable is a 36-pin high-density
printer to 25-pin DSUB PC cable.
Using the following illustration, connect a parallel interface cable to your
computer and to the printer’s parallel port.
Parallel
Ethernet®
PHASER 340
1
2
Service Reset
Second
Feeder
115
SCSI Disk
Parallel
Service
Only
1
9101-08
User Manual
2-23
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
SCSI peripheral devices
The SCSI port is used for connecting these optional peripheral devices:
■
Phaser Copystation
To set up the Phaser Copystation and to connect it to your printer,
refer to Chapter 2 of the Phaser Copystation User Manual. Refer to
“Phaser Copystation” on page 8-9 for ordering information.
■
External SCSI hard disk
■
Provides storage for additional downloadable fonts. You can
connect one or more SCSI external hard disks to the printer for
additional font storage. When you download a font to an external
disk, the font remains there until you remove it.
■
Allows for collation of print jobs on Phaser 350 printers with the
Extended Features option. Refer to “Using the Quick Collate
option” on page 4-12 for more information.
Refer to “Interface cables and adapters” on page 8-3 for information on
ordering SCSI cables.
Selecting a SCSI hard disk
■
For font storage. The Phaser 350 printer can use most SCSI hard
disks that support the full SCSI command set. Also, most SCSI hard
disks that work with an Apple LaserWriter will work with a
Phaser 350 printer. Contact your computer or printer dealer for
information.
■
For printer collation. To the use the collation feature available with
the printer’s Extended Features option, you’ll need to order a
1.2 Gigabyte external SCSI hard disk. This specific SCSI drive,
available from Tektronix, is required for use with the Phaser 350
printer. Refer to Chapter 8 for ordering information.
2-24
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Turning on the printer
After you have connected the interface cables, you are ready to connect the
power cord and turn on the printer. If you need to turn the printer off, wait
until the display shows Readyor the printer’s name before powering it
down.
Caution
To avoid damaging the printer, make sure that the voltage
select switch is set to match the AC line voltage for your
location and that the power switch is in the off position before
connecting the power cord.
If you move the printer to a location that uses a line voltage other than the
printer’s current setting, refer to “Changing line voltage” on page 5-41 for
information on changing the line voltage selection switch.
Ethernet®
PHASER 350
AUX
Feeder
115
DIP
Parallel
Service
port
SCSI Disk
115
9682-03
User Manual
2-25
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
1. Plug the power cord into the printer and into a grounded outlet.
2. Turn on the printer.
Note
To ensure optimum printing performance and best ink economy,
leave the printer turned on overnight and during weekends. The
printer automatically switches into a standby mode to reduce
power consumption during periods of infrequent use.
1
9101-10
As the printer warms up
The first time you turn your printer on, it will take about 15 minutes to warm
up. The printer’s front panel displays a percentage value to indicate its
progress. The warm-up cycle is complete when the front panel displays
100%.
As the printer initializes, you will hear a series of start-up noises that are
normal and are not an indication of problems with the printer. During
warm-up, the printer outputs a cleaning page as part of its initialization.
The printer is available for printing when it displays Readyor the printer’s
name.
2-26
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Turning off the Startup page
After the printer has warmed up, it automatically prints a startup page. If
you want to turn off the startup page, you can do so through the front panel.
Refer to Chapter 7 for instructions on using the front panel. You can also
control the startup page through a utility file provided on the printer’s
CD-ROM, or through your World Wide Web browser. Refer to the CD-ROM
or the PhaserShare Network Cards and Software System Administrator Manual,
respectively, for information on utility files and web browsers.
Front panel controls
When you first turn on the printer, the Power
and Error
indicators on
the front panel are lighted. The printer takes about 15 minutes to completely
warm up. During the warm-up cycle, the Power indicator remains on, the
Error light goes out, and the front panel displays a series of “Warming up”
messages.
Status messages, such as Warming Up, appear on the top line of the display.
Button labels, such as Info, Cleanand Menu, appear on the lower line of
the display. Button labels identify a function for the corresponding button
located under the label. For example, to access other menus, press the
button located under the word Menu.
Ready
Power
Info
Clean
Menu
Error
Exit
9682-04
Accessing the front panel menu
When the printer is shipped, access to the front panel menu is made by
pressing the Menu button. System administrators may choose to limit
access to front panel menus, requiring users to know a two-button
combination to gain full access to menus. Refer to the Chapter 7 for a
complete description of front panel controls and menus.
User Manual
2-27
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Selecting a language for the front panel
Messages that appear in the front panel window are in English by default.
To change the language to Spanish, French, German, Italian, or Japanese,
follow these steps.
1. When the printer is on and Readyor the printer’s name appears,
press the Menu button. The printer displays the first selection in
the menu:
Help Pages
<---- ----> Menu
2. Using the left (<----)or right (---->)arrow buttons, scroll
through the selections until the following message appears:
Language
<---- ----> Menu
3. Press the Menu button to access language selections. The printer
displays the following message:
Language:English*
<---- ----> OK
where the asterisk (*) indicates the currently selected language.
4. Using the left or right arrow buttons, scroll through the language
selections until you reach the appropriate setting.
5. Press the OK button to confirm your language selection.
Exit
6. Return to the top level of the menu by pressing the
button
until the printer displays the Readymessage.
2-28
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Help Pages overview
The printer has several Help Pages that you can print to learn more about
the printer’s operation and configuration. Refer to “Printer Help Pages” on
page 7-6 for a detailed list of available Help Pages. You can print the Help
Pages from the front panel; refer to the instructions below. You can also print
Help Pages using your World Wide Web browser; refer to the PhaserShare
Status Software User Manual for information.
Printing Help Pages from the front panel
After setting up the printer, you may want to print Help Pages to check that
the printer is operating correctly. A general description of printing Help
Pages from the front panel is described in the following steps. For detailed
steps on printing specific Help Pages, refer to the on-line manual on the
printer’s CD-ROM.
1. When the printer is on and the Readymessage or the printer’s
name appears, press the Menu button. The printer displays the
following message:
Help Pages
<---- ----> Menu
2. Press the Menu button to access the Help Pages. The printer
displays the following message:
Menu Map
<---- ----> Print
3. Using the left (<----)or right (---->)arrow buttons, scroll
through these selections: Menu Map, Configuration Page,
Startup Page, Demonstration Pages, RGB Color
Sampler, and CMYK Color Sampler.
4. Press the Printbutton to print the displayed page(s).
User Manual
2-29
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Installing the printer’s software
containing the software you need to use the printer. Included are drivers,
printer description files, color sampler charts, and utility files. Follow the
steps outlined in the table to set up your printer for printing.
Step 1:
Step 2:
Step 3:
Select a driver
Install/set up Use the
driver
Windows
Windows 95: Microsoft PostScript driver (recommended)
page 2-34
page 3-4
■ Use this driver if you prefer the standard Microsoft PostScript
driver for Windows 95.
Windows 95: AdobePS 4 Driver
page 3-6
■ Use this driver if you prefer Adobe’s PostScript driver for
Windows 95.
■ This driver offers unique features, such as N-Up and Watermark.
Windows 3.1: Tektronix Driver for Windows 3.1
page 2-39
page 2-43
page 3-8
page 3-9
■ Use this driver with Windows 3.1.
Windows 3.1: AdobePS 3 Driver
■ Use this driver with Windows 3.1.
Windows NT 3.51: Microsoft PostScript driver
Windows NT4.0: Microsoft PostScript driver
Phaser 350 Driver (based on the LaserWriter 7.1.2 driver)
page 2-48
page 2-54
page 3-13
page 3-11
page 3-16
Macintosh
■ Use this driver if you are printing large files and you want to
disable the background printing feature for better performance.
Adobe PSPrinter Driver 8.3.1
page 2-55
page 3-17
■ Use this driver if you prefer Adobe’s PostScript driver.
■ This driver offers unique features, such as N-Up and Watermark.
■ Use this driver with applications such as PageMaker.
Phaser 350 GX Driver
page 2-57
page 2-59
page 3-18
page 3-19
■ Use this driver with QuickDraw GX.
Apple LaserWriter 8.x (recommended)
■ Use this driver if you prefer Apple’s PostScript driver.
■ Use this driver with applications such as PageMaker.
PhaserPrint for UNIX (demonstration copy)
Workstations
page 2-61
page 3-21
2-30
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
PC/Windows software
Refer to the following table for more information on printer software.
CD-ROM
directory
Diskette+
directory
Software
Description
Where to
find
WIN95_NT
top-level
Microsoft Windows
PostScript Driver
■ Driver for Windows 95
Microsoft Driver for
Windows NT++
■ Drivers for Windows NT 3.51 and 4.0
page 2-45
page 2-48
(for i366)
QUARK
QUARK
QuarkXPress
PDF File
Installs TKPH3501.PDF, if QuarkXPress
application is present
page 2-32
SAMPLERS
PANTONE
SAMPLERS
PANTONE
Sampler Files
Pantone Files
Color sampler charts and a font sampler
Chapter 3
Chapter 3
■ Diskette: Pantone color chart only
■ CD-ROM: Pantone color chart and color
library files
Tektronix Driver+++
AdobePS 4 Driver†
AdobePS 3 Driver †* Driver for Windows 3.1
Driver for Windows 3.1
Driver for Windows 95
page 2-39
page 2-37
page 2-43
on-line^
ADOBEPS4
ADOBEPS3
PHSR350
n/a
n/a
n/a
n/a
Printer Utilities
Printer-specific utility files
NET_UTIL
Network Utilities
Utility files for using the printer on a
network
on-line^
TOOLS
n/a
Printer Tools
Manuals
■ Authorization tool
■ Adobe Acrobat Reader†
on-line^
MANUALS
ATM
n/a
n/a
Adobe Acrobat Reader PDF versions of the on-line^
printers manuals
Adobe Type
Manager†
ATM software
(Available with the printer’s Extended
Features option only.)
Chapter 3
+
Software available on the Printer Software for Windows 3.1, 95, NT diskette.
This driver is available on the Microsoft Driver for Windows NT 3.51 and 4.0 (for i386) diskette.
This driver is available on the Tektronix Printer Driver for Windows 3.1 diskette.
++
+++
†
These items have their own installer applications on the printer’s CD-ROM.
^ See the on-line manuals on the printer’s CD-ROM for more information.
* This driver is also shipped separately on the AdobePS 3 Driver diskette.
n/a: Software not available on diskette.
User Manual
2-31
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Installing printer description files
PostScript printer description files (PPDs) are used by some drivers and
applications for gaining information about a printer’s page sizes, color
corrections, and other options. To properly use the printer with one of the
following applications, install the appropriate file.
QuarkXPress
The QuarkXPress application uses a unique PDF file.
1. Locate the TKPH3501.PDF:
■
■
On the printer’s CD-ROM in the QUARK directory.
On the Printer Software for Windows diskette in the
QUARK directory.
2. Copy the TKPH3501.PDF file to the PDF subdirectory of the Quark
application on your hard disk. For example:
COPY TKPH3501.PDF C:\XPRESS33\PDF
2-32
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Aldus and Adobe applications
Aldus and Adobe applications, such as PageMaker and FreeHand, use
PostScript printer description (PPD) files. Refer to your applications’
documentation for details on using PPD files.
Note
To add PPDs for printers other than the Phaser 350 printer, open
the WIN95_NT directory on the printer’s CD-ROM.
1. Locate the printer’s PPD files:
■
■
On the printer’s CD-ROM in the WIN95_NT directory.
2. Select a PPD file:
■
■
Use TK350171.PPD if you have the standard version of the printer.
Use TK350691.PPD if you have the printer’s Extended Features
option.
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. See page 2-29 for instructions on printing a
copy of the printer’s startup page.
3. Copy the PPD file to the directory on your hard disk where other
PPD files are located. For example, the subdirectory in
FreeHand’s File Manager containing printer description files
should be called:
ALDUS\USENGLISH\PPD4
User Manual
2-33
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Setting up the Microsoft PostScript driver for Windows 95
1. Use either the printer’s CD-ROM or diskette:
■
■
CD-ROM: Insert the printer’s CD-ROM into your CD-ROM drive.
Diskette: Insert the Printer Software for Windows diskette into
your disk drive.
2. Click the Start icon in the taskbar on your screen. In the menu that
appears, click Settings.
3. In the menu that appears, click Printers; the Printers window
appears.
4. In the Printers window, double -click Add Printer.
5. When the Add Printer Wizard window appears, click Next.
6. Select your printer’s connection:
■
Select Local Printer if your printer is connected directly to your
computer, then click Next.
■
Select Network Printer if you are accessing your printer through a
network. Click Browse to search the network and select a printer
queue. Then click Next.
7. In the window listing Manufacturers/Printers, click the
Have Disk button.
2-34
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
8. In the Install From Disk dialog box, do one of the following:
CD-ROM:
a. Click Browse.
b. In the Open dialog box select the Drive for the printer’s
CD-ROM.
c. Select the \ WIN95_NT directory under Folders.
d. Click OK.
Diskette:
a. Click Browse.
b. In the Open dialog box select the Drive for the Printer
Software for Windows diskette.
c. Click OK.
then click Next.
■
■
Select Tektronix Phaser 350 if you have the standard version
of the printer.
Select Tektronix Phaser 350 600x300 if you have the printer’s
Extended Features option.
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. See page 2-29 for instructions on printing a
copy of the printer’s startup page.
10. Select the port your printer is connected to, then click Next.
11. It is recommended that you use the default printer name shown
under Printer name. Click Yes if you want this printer to be the
default printer. Then click Next.
User Manual
2-35
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
12. At the prompt, Would you like to print a tesctlicpkaYgees?to
verify the printer’s connection, or click No. Then click Finish.
A status bar appears while files are copied to your computer.
13. If prompted, select the path for the PostScript driver files; these
should be in your WINDOWS/SYSTEM directory.
If the files aren’t installed on your hard disk, do one of the
following:
■
Select the drive for the printer’s CD-ROM and the \ WIN95_NT
directory, and click OK.
■
Select the drive for the printer’s diskette and click OK.
The software you need is installed.
14. If your printer is set up correctly, and you clicked Yes in Step 12, a
test page prints showing the Windows 95 logo and information on
your printer.
Your Phaser 350 printer is added to the Printers window.
2-36
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Setting up the Adobe PostScript driver for Windows 95
Note The files for this driver are available only on the printer’s
CD-ROM. If you already have the driver installed and you are
only adding a printer, such as the Phaser 350 printer, open the
Control Panel, double-click the Adobe driver icon, then continue
with Step 7.
1. Insert the printer’s CD-ROM into your CD-ROM drive.
2. Click the Start icon in the taskbar on your screen. In the menu that
appears, click Run.
3. In the Run window, type in the drive the CD-ROM is in, followed
by the \ ADOBEPS4 directory and the file name SETUP.EXE and
click OK. For example:
C:\ADOBEPS4\SETUP
4. When the AdobePS4 PostScript Printer Driver Setup dialog box
appears, click the Read button if you wish to see a text file with
driver instructions. Click Next to continue, or Exit to quit.
5. In the Install Setup Program dialog box, decide if you want to
copy the Adobe driver setup program to your hard disk, then
click Next.
If you selected Yes, continue with the on-screen instructions.
6. In the Printer Type dialog box, select your printer’s connection:
■
Select Local Printer if your printer is connected directly to your
computer, then click Next.
■
Select Network Printer if you are accessing your printer through a
network. Click Browse to search the network and select a printer
queue. Then click Next.
User Manual
2-37
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
7. In the Install PostScript Printer from PPD dialog box, select the
directory. Select your printer, then click Next.
■
Select Tektronix Phaser 350 if you have the standard version
of the printer.
■
Select Tektronix Phaser 350 600x300 if you have the printer’s
Extended Features option.
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. See page 2-29 for instructions on printing a
copy of the printer’s startup page.
8. In the Local Port Selection dialog box, select the port you want to
use, then click Next. (You can configure the port in this dialog box
at any time.)
9. In the Add Printer dialog box, type in the printer’s name, select
the printer as default, and decide if you want to print a test page.
Click Next to continue.
10. If you see the Different Versions Detected dialog box, click Next
to update the files from the printer’s CD-ROM.
11. When the installation is finished, the Tektronix Phaser 350
Properties dialog box appears. Make selections in the driver,
referring to Chapter 3 for more information on printer options.
Note
Refer to the Adobe PostScript Printer Driver User Guide on the
printer’s CD-ROM (USRGUIDE.PDF) for more detailed
information on the AdobePS 4 driver.
2-38
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Setting up the Tektronix driver for Windows 3.1
Packaged with your printer is a Tektronix Printer Driver for Windows 3.1
floppy diskette. This diskette contains a customized version of the Microsoft
printer driver, version 3.58.
1. Start Windows, if it isn’t already running.
2. Insert the Tektronix Printer Driver for Windows 3.1 diskette into your
computer’s disk drive.
3. Open the Control Panel and double-click on the Printers icon; the
Printers dialog box appears.
4. Click the Add>> button.
5. In the List of Printers, select Install Unlisted or Updated Printer.
6. Click the Install button.
7. Type in the drive containing the printer’s diskette, for example, A:,
and click OK.
8. Select your printer, then click OK. The driver software you need is
automatically installed.
■
■
Select Tek Phaser 350 (TekColor) if you have the standard version
of the printer.
Select Tek Phaser 350 (TekColor) Ext if you have the printer’s
Extended Features option.
Note
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. You can print a copy of the startup page from
the printer’s front panel.
If you see a message that the driver is currently being used and
cannot be updated, exit all programs, restart Windows, and try
installing the printer again.
User Manual
2-39
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Configuring the driver
1. Open the Printers dialog box if it is not still displayed. (From the
Control Panel, double-click the Printers icon.)
2. In the Printers dialog box, choose your printer from the list of
installed printers.
3. Click the Set As Default Printer button if you want to select your
printer as the default.
4. Click the Connect button; the Connect dialog box appears.
5. Select the port your printer is connected to.
The printer’s configuration page contains the information you
need to set up the printer’s port.
Interface
Parallel
Serial
Select
LPTx
Then do the following
Go to Step 6.
COMx
1. Click the Settings button to open the
Settings dialog box.
2. Fill in each item based on your
printer’s configuration, then click OK.
Refer to your Microsoft Windows
documentation for details, or ask your
network administrator for help.
Network
Network port
(LPTx or COMx)
1. Click the Network button to open the
Printers-Network Connections
dialog box.
2. Fill in each item based on your
printer’s configuration, then click OK.
Refer to your Microsoft Windows
documentation for details, or ask your
network administrator for help.
Note
You can use the FILE port to save a document to a PostScript file
instead of sending it to the printer. For more information, see
your Microsoft Windows documentation.
2-40
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
6. Set the Timeouts. These options regulate your computer’s
communications with its printer ports.
■
Device Not Selected: Use this text box to change the number of
seconds Windows waits before notifying you that a printer is
off-line. The default of 15 seconds is recommended.
■
Transmission Retry: On large or multiple page documents you
may see an Alert message that the printer is no longer accepting
data before the job is completely downloaded to the printer. To
minimize the occurrence of this message, you should set this option
to a larger value, such as 900 seconds (15 minutes). Type a value
between 45 and 999 in this text box; the default setting is 45
seconds.
7. Click OK to return to the Printers dialog box, then click the Setup
button. A dialog box appears with the name of the printer you
selected across the top. Use this dialog box to select paper source,
paper size, image orientation, and number of copies.
Note
You may want to set the number of copies from your application
because the number of copies in the Setup dialog box remains the
same until you change it again. Also, if you are printing multiple
pages, make sure the Transmission Retry is set for at least
600 seconds (10 minutes), to avoid unnecessary timeouts.
8. Click the Options button to see the Options dialog box; make the
following selections:
■
Make sure the Color check box is checked on to print in color.
User Manual
2-41
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
■
Select one of the Header options. The Header contains important
PostScript information that must accompany each print job; it is not
a banner page printed with each job. If the Header is not used, your
job does not print. Click one of the following options:
■
Check the Send Header with Each Job box to download
PostScript header information with each print job.
Or:
■
Click the Send Header button to save the PostScript header
information in the printer. This option makes print files a little
smaller and faster than the first option, but you need to click the
Send Header button every time the printer is turned on
or reset.
9. From the Options dialog box, click the Advanced button to see the
Advanced Options dialog box. Make sure the Use PostScript
Level 2 Features check box is checked on.
Note
The Use PostScript Level 2 Features option affects the print
time of bitmapped (raster) images by improving the image
transfer time from the computer to the printer, and by improving
the image processing time in the printer. This option is only
available to applications that use this Tektronix driver with
Tektronix PostScript Level 2 printers, such as the Phaser 350.
When this box is checked, the Compress Bitmaps option is
unavailable (grayed out).
10. Click OK to return to the Options dialog box.
11. In the Options dialog box, click the Printer Features button to see
the Tektronix Printer Features dialog box. Make color correction,
print quality, and other selections as desired. Click OK to return
to the Options dialog box.
12. Continue clicking OK to return to the Printers dialog box, then
click Close.
2-42
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Setting up the Adobe PostScript driver for Windows 3.1
Note The files for this driver are available on the printer’s CD-ROM
and on the AdobePS 3 Driver diskette.
If you already have the driver installed and you are only adding
the Phaser 350 printer, open the Control Panel, double-click the
Adobe driver icon, then continue with Step 5.
If you already have the driver installed and you want to add a
printer other than the Phaser 350 printer, open the Control
Panel, double-click the Adobe driver icon, then continue with
Step 5. Printer PPD files are located in the \ WIN95_NT
directory on the printer’s CD-ROM only.
1. Insert the printer’s CD-ROM into your CD-ROM drive, or insert
the AdobePS 3 Driver diskette into your disk drive.
2. In the Program Manager in Windows 3.1, select Run from the
File menu.
3. At the Command Line, do one of the following:
■
CD-ROM: Type in the drive the CD-ROM is in, followed by the
\ ADOBEPS3 directory and the file name SETUP.EXE, and click OK.
For example:
C:\ADOBEPS3\SETUP
■
Diskette: Type in the drive the diskette is in, followed by the file
name SETUP.EXE, and click OK. For example:
A:SETUP
4. When the README.WRI dialog box appears, select one of the
buttons as desired.
5. In the PostScript Printer Driver Setup dialog box, click Continue
to begin the driver installation. This installer overwrites older
versions of the Adobe PostScript driver.
User Manual
2-43
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
6. A message appears as files are copied to your hard disk. Click the
Restart Windows button when the installation is complete.
appears, select your printer in the Printer Descriptions Available
list and click Install:
■
Select Tektronix Phaser 350 if you have the standard version
of the printer.
■
Select Tektronix Phaser 350 600x300 if you have the printer’s
Extended Features option.
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. See page 2-29 for instructions on printing a
copy of the printer’s startup page.
8. At the installation successful message, click OK.
9. Click Close in the Install PostScript Printer from PPD dialog box.
10. At the message, click OK; the Control Panel opens.
11. From the Control Panel, double-click Printers.
12. In the Printers dialog box, select the Tektronix Phaser 350 printer
you just installed, then click Connect.
13. In the Connect dialog box, select the port the printer is connected
to, then click OK.
Note
Refer to the Adobe PostScript Printer Driver User Guide on the
printer’s CD-ROM (USRGUIDE.PDF) for more detailed
information on the AdobePS 3 driver.
2-44
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Setting up a PostScript driver for Windows NT 4.0
TekColor color corrections and other PostScript Level 2 printer features are
supported by the Windows NT 4.0 PostScript driver. Follow the instructions
below to update your Windows NT 4.0 PostScript driver for use with a
Phaser 350 printer. Refer to your Microsoft Windows NT documentation for
details on features in the driver.
Note
The Windows NT 4.0 driver does not support the PhaserMatch™
application.
These instructions assume a basic familiarity with Windows NT operation
and terminology. For additional information about Windows NT, refer to
your Microsoft Windows NT documentation.
1. Locate the Microsoft® Driver for Windows NT™ 3.51 and 4.0
(for i386) diskette that was shipped with your printer. Insert the
diskette into your computer’s disk drive.
2. Click the Start icon in the taskbar on your screen. In the menu that
appears, click Settings. In the Settings menu, click Printers.
3. In the Printers Folder, double-click the Add Printer icon.
4. From the Add Printer menu, follow the Add Printer Wizard
instructions until the Manufacturers/Printers window appears.
5. Click the Have Disk button.
6. In the Install From Disk dialog box, type in the disk drive location
of the printer’s diskette, such as A:, then click OK.
User Manual
2-45
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
7. A list of Tektronix printers appears. Select your printer in the list,
then click Next:
■
■
Select Tektronix Phaser 350 if you have the standard version of the
printer.
Select Tektronix Phaser 350 Extended if you have the printer's
Extended Features option.
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. You can print a copy of the startup page from
the printer’s front panel.
8. Select the appropriate settings in Add Printer Wizard, then click
the Finish button. When the Properties dialog box appears,
continue with the following instructions: “Setting up installed
options” and “Making default settings.”
Setting up installed options
Note
If you are not sure which printer options you have installed, the
printer’s startup page lists some of this information, such as SCSI
hard disks. You can print a copy of the startup page from the
printer’s front panel.
1. From the Properties dialog box, click the Device Settings tab.
2. In the Device Setting sheet, scroll to the end of the list to
Installable Options.
3. Under Installable Options, highlight Optional Lower Tray.
4. In the box that appears at the bottom of the window, click
Installed.
5. Select other options you have installed.
6. Click OK to return to the Control Panel.
2-46
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Making default settings
1. From the Properties dialog box, click the Device Settings tab.
2. In the Device Settings sheet, locate Form To Tray Assignment.
3. Under Form To Tray Assignment, highlight the first tray.
4. In the box that appears at the bottom of the window, select the size
media you will be using in that tray.
5. Repeat Steps 3 and 4 for each installed tray.
6. Click OK to return to the Control Panel.
Selecting a printer's Default Document Properties
Note
Document properties set from an application always override
document defaults set in the printer' s Document Properties
sheets. However, if an application does not set a document
property (such as page orientation or paper size), the printer
defaults to the document properties set in the printer' s
Document Properties sheets.
1. From the Control Panel, open the Printers folder.
2. With the right mouse button, click on the printer’s icon.
3. With the left mouse button, click on Document Defaults.
4. Click the Advanced tab to change any printer features, including
TekColor color corrections.
5. Click the Page Setup tab to see other features.
User Manual
2-47
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Setting up a PostScript driver for Windows NT 3.51
This update procedure provides printer page size information for
Windows NT 3.51 applications. However, TekColor color corrections and
other PostScript Level 2 printer features are not supported by the
Windows NT 3.51 PostScript driver. Refer to the manuals that were shipped
with your printer for instructions on other ways of selecting color
corrections. Refer to your Microsoft Windows NT documentation for details
on features in the driver.
These instructions assume a basic familiarity with Windows NT operation
and terminology. For additional information about Windows NT, refer to
your Microsoft Windows NT documentation.
1. Locate the Microsoft® Driver for Windows NT™ 3.51 and 4.0
(for i386) diskette that was shipped with your printer. Insert the
diskette into your computer’s disk drive.
2. From the Main window, double-click on the Print Manager icon.
3. From the Printer menu select Create Printer; the Create Printer
dialog box appears.
4. Under Driver, scroll to the end of the list and select Other; the
Install Driver dialog box appears.
5. When prompted, type in the path for the printer’s diskette.
6. Under Printer Driver, select your printer from the list, then
click OK.
■
Select Tektronix Phaser 350 if you have the standard version of
the printer.
■
Select Tektronix Phaser 350 Extended if you have the printer's
Extended Features option.
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. You can print a copy of the startup page from
the printer’s front panel.
2-48
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
7. When you are returned to the Create Printer dialog box, fill in the
other fields as desired, then click OK; the PostScript Printer Setup
dialog box appears.
8. Select options in the PostScript Printer Setup dialog box.
Click OK when you are finished.
■
Enabling the Use Printer Halftoning option is recommended.
9. When the Windows NT Setup dialog box appears, click Close.
User Manual
2-49
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Installing Adobe Acrobat Reader
1. Insert the printer’s CD-ROM into your CD-ROM drive.
2. Do one of the following depending on your system:
Windows 95:
a. Click the Start icon in the taskbar on your screen. In the menu
that appears, click Run.
b. In the Run window, type in the drive the CD-ROM is in,
followed by the \ TOOLS directory and the file name
ACROREAD.EXE and click OK. For example:
C:\TOOLS\ACROREAD
Windows 3.1:
a. In the Program Manager in Windows 3.1, select Run from the
File menu.
b. At the Command Line, type in the drive the CD-ROM is in,
followed by the \ TOOLS directory and the file name
ACROREAD.EXE, and click OK. For example:
C:\TOOLS\ACROREAD
3. Follow the on-screen instructions to install Acrobat Reader.
2-50
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Installing ATM software
Note
ATM software is available only on the CD-ROM for the printer’s
Extended Features option.
1. Insert the printer’s CD-ROM into your CD-ROM drive.
2. Click the Start icon in the taskbar on your screen. In the menu that
appears, click Run.
3. In the Run window, type in the drive the CD-ROM is in, followed
by the \ ATM directory and the file name INSTALL1.EXE and click
OK. For example:
C:\ATM\INSTALL
4. Follow the on-screen instructions to install ATM. For more
information, refer to the ATM quick reference cards that were
shipped with your printer.
User Manual
2-51
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Macintosh software
Installer overview
The Phaser 350 printer’s CD-ROM and diskette include an installer
application that automatically installs the printer’s software onto your
Macintosh hard disk. You can select a standard installation (Easy Install)
from the diskette or CD-ROM, or select individual items (Custom Install)
from the CD-ROM only.
Software (installed location)
Description
Easy
Install
Adobe PSPrinter Driver 8.3.1
(System Folder:Extensions)
Driver for use with all Macintosh systems.
Phaser 350 Driver (System Folder: Extensions)
Custom driver based on the
LaserWriter 7.1.2 printer driver.
(Availableon
theCD-ROM
and
Phaser 350 GX Driver (System Folder: Extensions)
Driver for use with QuickDraw GX.
diskette.)
Printer Descriptions
PPDs for use with drivers and applications.
(System Folder:Extensions: Printer Descriptions)
Screen Fonts
Screen fonts to match the printer’s fonts.
Standard: System Folder:Fonts
Extended Features option: Installs alias to ATM
software installer in PhaserTools folder.
ColorSync Profile
(System Folder: Preferences: ColorSync™ Profiles)
Printer profile for use with ColorSync 2.0.
Color sampler charts and a fonts sampler.
Samplers (PhaserTools:Samplers)
QuarkXPress PDF File
(QuarkXPress application folder: PDF)
File for use with the QuarkXPress
application.
PhaserPrint Photoshop Plug-in
Custom plug-in for printing from Adobe
(Photoshop application folder: Plugs-ins: Acquire/Export) Photoshop.
Adobe Acrobat Reader Installs alias to ATM software
installer in PhaserTools folder.
Installs the Acrobat Reader application
onto your hard disk.
LaserWriter 8.3.2 Driver Installs alias to the
LaserWriter installer in PhaserTools folder.
Installs the Apple LaserWriter driver onto
your hard disk.
Custom
Install
Manuals (PhaserTools:Manuals)
Acrobat Reader PDF files of the printer’s
manuals.
Printer Utilities (PhaserTools: Printer Utilities)
Network Utilities (PhaserTools:Network Utilities)
Pantone Files (PhaserTools:Pantone Files)
Printer utility files for controlling printer
features.
(Includes
Easy Install
items plus
additional
software.
Available on
theCD-ROM
only.)
Utility files for using the printer on a
network.
PANTONE Color library files and sampler
chart.
2-52
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Using the Macintosh Installer
Use the installer application on the printer’s CD-ROM or diskettes to install
the printer’s standard software. Then, continue with driver setup
instructions depending on the driver you are using.
1. Use either the Phaser 350 printer’s diskette or CD-ROM.
■
Floppy diskette: Insert the Printer Software for Macintosh diskette
into your computer’s disk drive.
■
CD-ROM: Insert the Phaser 350 printer’s CD-ROM into your
computer’s CD-ROM drive.
2. Double-click the Phaser 350 Installer icon. Click Continue until
the Easy Install window appears.
3. To install the items listed in the Easy Install window, click Install.
For details on each item, click Read Me.
To see a list of individual options, select Custom Install from the
pull-down menu (available with the installer on the CD-ROM
only).
4. Select individual items to install from the Custom Install window.
Click the I buttons for information on each item. Click Install
when you are ready to install the selected items.
User Manual
2-53
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Setting up the Phaser 350 printer driver
The Phaser 350 driver is a Tektronix-modified version of Apple's
LaserWriter 7.1.2 printer driver. Use the Phaser 350 driver if you are using
System Software 6.0.7, or 7.0 and later.
1. Install the printer’s software as described on page 2-53. Choose
Easy Install to install all of the necessary software, or select
Phaser 350 Driver in the Custom Install window.
2. Select Chooser from the Apple menu.
3. Click on the Phaser 350 printer driver icon on the left side of the
Chooser. A list appears with the printers you have connected to
your Macintosh or printers that are available on a network. (If the
printer driver icon does not appear, Restart your Macintosh, and
repeat the printer driver installation procedure; also check the
cable connections on your computer and printer.)
4. Click on the Zone your printer is in. See your network
administrator if you have questions.
5. Click on your Phaser 350 printer in the list of printers on the right
side of the Chooser.
6. Close the Chooser by clicking its close box.
2-54
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Setting up the Adobe PSPrinter Driver
The Adobe PSPrinter driver uses printer-specific PPDs (PostScript Printer
Description files) for information on a printer’s page sizes, printing options,
and media type options. To use the Adobe PSPrinter driver with a
Phaser 350 printer, do the following steps. If the printer is busy, it may take
some time to complete this set-up procedure; you may want to do this
procedure when the printer is idle. You only have to set up a printer once.
Note
Refer to the Adobe PostScript Printer Driver User Guide on the
printer’s CD-ROM for more detailed information on the
Adobe PSPrinter driver.
1. Install the printer’s software as described on page 2-53. Select
Easy Install to automatically install all of the necessary software,
or select Adobe PSPrinter Driver and Printer Descriptions in the
Custom Install window.
2. Open the Chooser.
3. Select the PSPrinter driver icon.
4. Click on the Zone your printer is in. See your network
administrator if you have questions.
5. Select your printer from the list.
6. Still in the Chooser, click the Setup button to see a list of options.
7. The correct PPD file should be selected automatically.
If the PPD file is not automatically selected, a dialog box opens
showing the location of the PPD files you have installed in the
Printer Descriptions folder, in the Extensions folder, inside your
System Folder. Click one of the following PPDs and click Select:
■
■
Use TK350171.PPD with the standard version of the printer.
Use TK350691.PPD with the printer’s Extended Features option.
User Manual
2-55
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. See page 2-29 for instructions on printing a
copy of the printer’s startup page.
8. In the dialog box that appears, select the appropriate items under
Installable Options then click OK.
9. Click the Chooser’s close box.
2-56
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Setting up the Phaser 350 GX driver
If you are using Apple Macintosh QuickDraw GX and System Software 7.5
or later, use the Phaser 350 GX driver to print to your Phaser 350 printer.
■
non-QuickDraw GX applications.
■
QuickDraw GX does not work with non-QuickDraw GX printer
drivers. If you want to print from non-QuickDraw GX
applications with a driver such as the LaserWriter 8.x, you must
first disable QuickDraw GX.
Note
Refer to the on-line manual on the printer’s CD-ROM for details
on using the Phaser 350 GX driver.
1. Install the printer’s software as described on page 2-53. Select
Easy Install to automatically install all of the necessary software,
or select Phaser 350 GX Driver in the Custom Install window.
2. Select Chooser from the Apple menu.
3. Click the Phaser 350 GX printer driver icon on the left side of the
Chooser. A list appears with the printers available on your
network. (If the printer driver icon does not appear, Restart your
Macintosh, and repeat the printer driver installation procedure;
also, check the cable connections on your computer and printer.)
4. Click on the Zone your printer is in. See your network
administrator if you have questions.
5. In the Connect via field’s pop-up menu, select your printer’s
communication method:
■
■
The AppleTalk option is the standard network connection.
The Servers option is used to select a shared desktop printer.
User Manual
2-57
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
6. Click on your Phaser 350 printer in the list of printers on the right
side of the Chooser.
7. Click the Create button to create a desktop printer. An icon of the
printer appears on the desktop with the same name as the printer
selected in the Chooser.
8. Close the Chooser by clicking its close box.
2-58
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Setting up the Apple LaserWriter 8.x driver
The LaserWriter 8.x driver uses printer-specific PPDs (PostScript Printer
Description files) to learn a printer’s page sizes, printing options, and media
type options. To use the LaserWriter 8.x driver with a Phaser 350 printer, do
this configuration procedure; you may want to do this procedure when the
printer is idle. You only have to configure a printer once.
This driver software is available only on the printer’s CD-ROM.
Note
During installation, the LaserWriter 8.x driver leaves other
versions of the LaserWriter driver (such as 7.x and 6.x) intact,
but overwrites an earlier version of the LaserWriter 8.x driver, if
one exists.
1. Install the printer’s software as described on page 2-53. Choose
Custom Install, then select LaserWriter 8.x Driver and
Printer Descriptions.
2. Install the driver:
a. In the PhaserTools folder on your hard disk, locate the alias to
the LaserWriter 8.x Installer.
b. Double-click on the alias to open the installer application on
the printer’s CD-ROM
c. Follow the on-screen instructions to install the driver.
3. Open the Chooser.
4. Select the LaserWriter 8 driver icon.
5. Click on the Zone your printer is in. See your network
administrator if you have questions.
6. Select your printer from the list.
7. Still in the Chooser, click the Setup button to see a list of options.
User Manual
2-59
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
If the PPD file is not automatically selected, a dialog box opens
showing the location of the PPD files you have installed in the
Printer Descriptions folder, in the Extensions folder, inside your
System Folder. Click one of the following PPDs and click Select:
■
■
Use TK350171.PPD with the standard version of the printer.
Use TK350691.PPD with the printer’s Extended Features option.
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. See page 2-29 for instructions on printing a
copy of the printer’s startup page.
9. In the dialog box that appears, select the appropriate items under
Installable Options then click OK.
10. Click the Chooser’s close box.
2-60
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Set Up
2
Workstation software
PhaserPrint™ software for UNIX (demo)
For UNIX environments, Tektronix offers the optional PhaserPrint™
software. PhaserPrint software includes driver-selectable printer options,
and provides fast, raster file and screen copy printing to Tektronix color
printers. The printer’s CD-ROM contains a demonstration copy of the
PhaserPrint software, and an on-line instruction guide, in the UNIXDEMO
directory. To purchase a licensed copy of PhaserPrint software, see page 8-9
for instructions.
Downloadable printer utility files
Note
Refer to the on-line manuals on the printer’s CD-ROM for more
information on printing from a workstation.
If you do not have a licensed copy of PhaserPrint software, you can use the
PostScript utility files on the Phaser 350 printer’s CD-ROM with UNIX and
VMS workstations. These files let you set up your spooling system to select
between media trays, print-quality modes, color correction modes and
other features. UNIX workstation users can access utility files in the
following ways:
■
Install the files from the Tektronix Phaser 350 printer’s CD-ROM if
your system includes a CD-ROM drive. Workstation-specific files
are located in the bin directory.
■
■
Access the Tektronix anonymous ftp site on the Internet at
ftp.tek.com.
Access the Tektronix World Wide Web server on the Internet:
■
■
Home page: http://www.tek.com/Color_Printers/
Utility files: ftp://ftp.tek.com/cpid/bbs/<platform>/350
where <platform> is pcs, macintosh, or unix.
■
Download utility files from the Tektronix Bulletin Board
Service (BBS); refer to the printer’s CD-ROM for information.
User Manual
2-61
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Set Up
2-62
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
3
Printing Basics
Printing from different platforms
You can print to your printer from IBM-compatible personal computers,
Make sure your printer is set up with the appropriate interface port; refer to
“Connecting the printer” on page 2-20.
If you haven’t already installed the printer’s software, refer to Chapter 2 for
instructions before continuing.
Refer to the following topics for specific information:
■
■
■
“Printing from a PC” on page 3-2
“Printing from a Macintosh” on page 3-14
“Printing from a workstation” on page 3-20
User Manual
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Printing from a PC
You can print from a PC with or without a printer driver. The supported
printer’s front panel.
Using Windows printer drivers
To select printer-specific features, print from one of the following provided
drivers. See page 3-3 for a reference table listing the printing features, and
how to find them quickly, in each of these drivers.
Windows 95 (Microsoft PostScript driver)
Windows 95 (AdobePS 4 driver)
Windows 3.1 (Tektronix Printer Driver)
Windows 3.1 (AdobePS 3 driver)
Windows NT (PostScript driver)
see page 3-4
see page 3-6
see page 3-8
see page 3-9
see page 3-13
Using the printer’s front panel
Refer to “Front panel overview” on page 7-1 for instructions on using the
printer’s front panel.
3-2
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Print features quick reference: Windows printer drivers
Driver
Windows 95
Windows 3.1
Windows NT 4.0
Feature
AdobePS 3
PostScript
Tektronix driver
Microsoft PostScript
AdobePS 4 PostScript
Paper tab
➥ Paper Size
Printers
Properties
Print
Media size
➥ Setup
➥ Paper tab
➥ Paper Size
➥ Properties
➥ Advanced tab
➥ Paper/output
➥ Paper Size
■ A/Letter
➥ Paper Size
■ A4
Paper tab
➥ Paper Source
Printers
Properties
Print
Media tray selection
➥ Setup
➥ Paper tab
➥ Paper Source
➥ Properties
➥ Advanced tab
➥ Paper/output
➥ Paper Source
■ Auto Select
■ Upper
➥ Paper Source
■ Lower
■ Paper
■ Transparency
■ Manual Paper
■ Manual Transparency
Features tab
➥ Print Quality
➥ Options
Properties
Print
Print-quality modes
➥ Printer Features
➥ Print Quality
➥ Device Options tab
➥ Printer features
➥ Print Quality
➥ Properties
➥ Advanced tab
➥ Printer features
➥ Print Quality
■ Fast Color
■ Standard
■ Enhanced (600 x 300)*
Features tab
➥ Color Correction
➥ Options
Properties
Print
Color correction
➥ Printer Features
➥ Color Correction
➥ Device Options tab
➥ Printer features
➥ Color Correction
➥ Properties
➥ Advanced tab
➥ Printer features
■ None
■ Vivid Color
■ Display
➥ Color Correction
■ SWOP Press
■ Euroscale Press
■ Commercial Press
■ Monochrome
■ Use Printer Settings
Features tab
➥ Color Correction
➥ Options
Properties
Print
Quick Collate*
➥ Printer Features
➥ Color Correction
➥ Device Options tab
➥ Printer features
➥ Color Correction
➥ Properties
➥ Advanced tab
➥ Printer features
➥ Color Correction
Features tab
➥ Color Correction
➥ Options
Properties
Print
Check Print*
➥ Printer Features
➥ Color Correction
➥ Device Options tab
➥ Printer features
➥ Color Correction
➥ Properties
➥ Advanced tab
➥ Printer features
■ Enabled
■ Disabled
➥ Color Correction
Features tab
➥ Color Correction
➥ Options
Properties
Print
Image Smoothing
➥ Printer Features
➥ Color Correction
➥ Device Options tab
➥ Printer features
➥ Color Correction
➥ Properties
➥ Advanced tab
➥ Printer features
■ Enabled
■ Disabled
➥ Color Correction
* These features are available with the printer’s Extended Features option only.
User Manual
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Using the Microsoft PostScript driver with Windows 95
To select printing options, follow these steps:
1. In the Printers window, click the Phaser 350 printer icon with the
right mouse button, then select Properties from the menu.
2. Click the following tabs to see printing options; refer to your
Windows 95 documentation for more information on tabs and
options.
■
Click the Details tab to see timeout and other options.
■
Set the Timeout settings.
Not Selected: Type a value of 0, or between 15 and 999, in this
text box to change the number of seconds Windows waits
before notifying you that a printer is off-line. The default is
15 seconds.
Transmission Retry: On large or multiple-page documents
you may see an Alert message that the printer is no longer
accepting data before the job is completely sent to the printer.
When using a shared printer, you should set this option to a
larger value, such as 900 seconds (15 minutes) to avoid these
unnecessary timeouts. Type a value between 45 and 999 in
this text box; the default setting is 45 seconds. (If you are
having timeout problems, also see “Printer’s timeout” on
page 6-31 for information on setting the printer’s timeout.)
■
Click the Paper tab to see media options, such as media sizes,
media trays, and media type.
■
Click the Graphics tab to see graphics options.
Note
Use the Print Quality selections in the Device Options tab
instead of the Resolution Options in the Graphics tab. See
page 3-5 for details.
Note
If you are using host color correction, you need to make selections
in the Graphics and Device Options tabs. Refer to the on-line
manuals on the printer’s CD-ROM for more information on host
color correction.
3-4
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
■
■
Click the Device Options tab to see printer-specific options, such
as color corrections.
Click the PostScript tab to see PostScript-related options.
■
The PostScript header contains important PostScript information
that must accompany each print job; it is not a banner page printed
with each job. If an option is not selected, an error message is
displayed on your computer screen and your job does not print.
Click one of the following in the PostScript header field:
Select Download header with each print job. This option
downloads PostScript header information with each print job.
Click the Send Header Now button to save the PostScript
header information in the printer, then select the Assume
header is downloaded and retained option. This option
makes print files a little smaller and faster than the first option,
but you need to click the Send Header Now button every time
the printer is turned off or reset.
■
Click the Advanced button to see more options. Select Use
PostScript Level 2 features. Click OK when finished.
Note
For faster printing, select Binary communications protocol
under Data format.
User Manual
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Using the AdobePS 4 driver with Windows 95
To select printing options, follow these steps:
1. In the Printers window, click the Phaser 350 printer icon with the
right mouse button, then select Properties from the menu.
2. Click the following tabs to see printing options; refer to your
Windows 95 documentation for more information on tabs and
options.
■
Click the Details tab to see timeout and other options.
■
Set the Timeout settings.
Not Selected: Type a value of 0, or between 15 and 999, in this
text box to change the number of seconds Windows waits
before notifying you that a printer is off-line. The default is
15 seconds.
Transmission Retry: On large or multiple-page documents
you may see an Alert message that the printer is no longer
accepting data before the job is completely sent to the printer.
When using a shared printer, you should set this option to a
larger value, such as 900 seconds (15 minutes) to avoid these
unnecessary timeouts. Type a value between 45 and 999 in
this text box; the default setting is 45 seconds.
■
Click the Paper tab to see media options, such as media sizes,
media trays, and media types.
■
Click the Graphics tab to see graphics options.
Note
Use the Print Quality selections in the Device Options tab
instead of the Resolution Options in the Graphics tab. See
page 3-5 for details.
Note
If you are using host color correction, you need to make selections
in the Graphics and Device Options tabs. Refer to the on-line
manuals on the printer’s CD-ROM for more information on host
color correction.
■
Click the Device Options tab to see printer-specific options, such
as color corrections.
3-6
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
■
Click the PostScript tab to see PostScript-related options.
The PostScript header contains important PostScript information
■
that must accompany each print job; it is not a banner page printed
with each job. If an option is not selected, an error message is
displayed on your computer screen and your job does not print.
Click one of the following in the PostScript header field:
Select Download header with each print job. This option
downloads PostScript header information with each print job.
Click the Send Header Now button to save the PostScript
header information in the printer, then select the Assume
header is downloaded and retained option. This option
makes print files a little smaller and faster than the first option,
but you need to click the Send Header Now button every time
the printer is turned off or reset.
■
Click the Advanced button to see more options. Select Use
PostScript Level 2 features. Click OK when finished.
Note
For faster printing, select Binary communications protocol
under Data format.
User Manual
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Using the Tektronix Driver for Windows 3.1
1. From the Control Panel, double-click the Printers icon to open the
Printers dialog box.
2. In the Printers dialog box, choose your printer from the list of
installed printers.
3. Click the Setup button. A dialog box appears with the name of the
printer you selected across the top. Use this dialog box to select
paper source, paper size, image orientation, and number of copies.
Note
You may want to set the number of copies from your application
because the number of copies in the Setup dialog box remains the
same until you change it again. Also, if you are printing multiple
pages, make sure the Transmission Retry is set for at least
600 seconds (10 minutes), to avoid unnecessary timeouts.
4. Click the Options button to see the Options dialog box.
5. Click the Printer Features button to see the Tektronix Printer
Features dialog box. Make color correction, print quality, and
other selections as desired.
6. Click OK until you return to the Printers dialog box, then
click Close.
3-8
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Using the Adobe PostScript driver for Windows 3.1
To select printing options, follow these steps:
1. From the Control Panel, double-click Printers.
2. In the Printers dialog box, select the Tektronix Phaser 350 printer,
then click Setup. A dialog box appears with the printer’s name
across the top.
3. Click the following tabs to see printing options; refer to your
Windows documentation for more information on tabs and
options.
■
■
Click the Paper tab to see media options, such as media sizes,
media trays, and media types.
Click the Features tab to see printer-specific options, such as color
corrections.
■
Set the Timeout settings.
Not Selected: Type a value of 0, or between 15 and 999, in this
text box to change the number of seconds Windows waits
before notifying you that a printer is off-line. The default is
15 seconds.
Transmission Retry: On large or multiple-page documents
you may see an Alert message that the printer is no longer
accepting data before the job is completely sent to the printer.
When using a shared printer, you should set this option to a
larger value, such as 900 seconds (15 minutes) to avoid these
unnecessary timeouts. Type a value between 45 and 999 in
this text box; the default setting is 45 seconds.
■
Click the PostScript tab to see PostScript-related options.
In the Performance Options field, select the Use PostScript Level 2
Features option.
■
User Manual
3-9
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
■
Click the Job Control tab to see print job-related options.
■
The PostScript header contains important PostScript information
that must accompany each print job; it is not a banner page printed
with each job. If an option is not selected, an error message is
displayed on your computer screen and your job does not print.
Click one of the following in the PostScript Header field:
Select Download Each Job. This option downloads PostScript
header information with each print job.
Select the Already Downloaded option to save the PostScript
header information in the printer, then click the Download
button. This option makes print files a little smaller and faster
than the first option, but you need to click the Download
button every time the printer is turned off or reset.
■
For better performance, select the Binary Mode option.
3-10
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Using the Windows NT 4.0 PostScript driver
If you are using Microsoft Windows NT 4.0, first follow the instructions in
Chapter 2 to set up a printer driver for a Phaser 350 printer. Then, select
TekColor color corrections and other printer features from the Windows NT
driver.
Selecting printer options within an application: Print
1. Select Print from the File menu; the Print dialog box appears.
You can select a different printer and other settings in this
dialog box.
2. Click on the Properties button; the Printer Document Properties
sheet appears.
3. Click the Advanced tab to change any printer features, including
TekColor color corrections. This tab displays the same
information as the Document Defaults Properties Advanced tab.
4. Click the Page Setup tab to see other features. This tab displays
the same information as the Document Defaults Properties Page
Setup tab.
Note
Changes to any of these settings overrides the Default Printer
Properties settings in the Printers folder.
User Manual
3-11
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Selecting printer options within an application: Page Setup
Note
If changing the Printer Driver settings through Page Setup
causes problems with the application you are using, then change
the Printer Driver settings through Print under the File menu,
described on page 11.
1. Select Page Setup from the File menu; the Page Setup dialog box
appears.
2. Select Paper Size and Source.
Note
Selecting Printer Folder Setting as the Paper Source uses the
default setting made under Document Defaults in the Printers
folder. To change this setting, select a different Source in
Page Setup.
3. Click on the Printer button; another Page Setup dialog box
appears. You can select a different printer here.
4. Click on the Properties button; the Printer Document Properties
sheet appears.
5. Click the Advanced tab to change any printer features, including
TekColor. This tab displays the same information as the
Document Defaults Properties Advanced tab.
6. Click the Page Setup tab to see other features. This tab displays
the same information as the Document Defaults Properties Page
Setup tab.
Note
Changes to any of these settings overrides the Default Printer
Properties settings in the Printers folder.
3-12
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Using the Windows NT 3.51 PostScript driver
If you are using Microsoft Windows NT 3.51, follow the instructions in
Chapter 2 to set up a Windows NT 3.51 PostScript driver with a Phaser 350
printer. You can select printer page sizes in the driver for Windows NT 3.51
applications, however, TekColor color corrections and other PostScript Level
2 features are not supported by the Windows NT 3.51 driver. Refer to
page 3-25 for instructions on selecting color corrections from the printer’s
front panel or from downloadable utility files. Refer to your Microsoft
Windows NT documentation for details on features in the Windows NT
driver.
Printing from DOS
Refer to the on-line manuals on the printer’s CD-ROM for information on
printing from DOS.
User Manual
3-13
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Printing from a Macintosh
To print from a Macintosh, you need a printer driver. Installing one of the
supported drivers allows you to select printing features right from your
Using Macintosh printer drivers
To select printer-specific features, print from one of the following provided
drivers. See page 3-15 for a reference table listing the printing features, and
how to find them quickly, in each of these drivers.
Phaser 350 driver
Adobe PSPrinter driver
Phaser 350 GX
see page 3-16
see page 3-17
see page 3-18
see page 3-19
Apple LaserWriter 8.x
Using the printer’s front panel
Refer to “Front panel overview” on page 7-1 for instructions on using the
printer’s front panel.
3-14
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Print features quick reference: Macintosh printer drivers
Feature
Feature
descriptions
Phaser 350 driver
Adobe PSPrinter driver
Apple LaserWriter 8.x
driver
Phaser 350 GX
driver
See
Print
Print
Printing
Print-quality modes
➥ TekColor button
➥ TekColor Options
➥ Print Quality
➥ Options button
➥ Print Options
➥ Print Quality
➥ Printer Driver Defaults
■ Fast Color
➥ Print Quality
■ Standard
■ Enhanced (600x300)*
page 3-28
Print
Print
Printing
Color correction
➥ TekColor button
➥ TekColor Options
➥ Color Correction
➥ Options button
➥ Print Options
➥ Color Correction
➥ Printer Driver Defaults
■ None
➥ Color Correction
■ Vivid Color
■ Display
■ SWOP Press
■ Euroscale Press
■ Commercial Press
■ Monochrome
■ Use Printer Settings
See
page 3-30
Page Setup
➥ Paper
Page Setup
➥ Paper
Page Setup
➥ Paper
Media size
■ A/Letter
■ A4
See
page 3-33
Print
Print
Printing
Media tray selection
➥ Paper Source
➥ Paper Source
➥ Printer Driver Defaults
■ Auto Select
■ Upper
➥Tray Selection
➥Tray Selection
➥Tray Selection
■ Lower
■ Paper
■ Transparency
■ Manual Paper
■ Manual Transparency
Print
Print
Printing
Quick Collate*
See
page 4-12
➥ TekColor button
➥ TekColor Options
➥ Quick Collate
➥ Options button
➥ Print Options
➥ Quick Collate
➥ Printer Driver Defaults
➥ Quick Collate
See
page 4-14
Print
Print
Printing
Check Print*
➥ TekColor button
➥ TekColor Options
➥ Check Print
➥ Options button
➥ Print Options
➥ Check Print
➥ Printer Driver Defaults
■ Enabled
➥ Check Print
■ Disabled
See
page 4-16
Print
Print
Printing
Image Smoothing
➥ TekColor button
➥ TekColor Options
➥ Image Smoothing
➥ Options button
➥ Print Options
➥ Image Smoothing
➥ Printer Driver Defaults
■ Enabled
➥ Image Smoothing
■ Disabled
* These features are available with the printer’s Extended Features option only.
User Manual
3-15
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Using the Phaser 350 driver
■
■
■
From the File menu, open the Page Setup dialog box. Use the
Paperpop-up menu toselecttheprinter’ssupported papersizes.
From the File menu, open the Print dialog box. Select media
options and paper trays in the Paper Source field.
Click the TekColor button in the Print dialog box to see the
TekColor Options dialog box. Select printer-specific options as
desired.
3-16
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Using the Adobe PSPrinter Driver
Note
Refer to the on-line user guide on the printer’s CD-ROM for
more information on using the Adobe PSPrinter driver.
■
■
■
From the File menu, open the Page Setup dialog box. Use the
Paper pop-up menu to select the printer’s supported paper sizes.
From the File menu, open the Print dialog box. Select media
options and paper trays in the Paper Source field.
In the Print dialog box, click the Options button to see the Print
Options dialog box. There are printer-specific features listed at
the bottom of the dialog box.
User Manual
3-17
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Using the Phaser 350 GX driver
Refer to the on-line manuals on the printer’s CD-ROM for details
Note
on using the Phaser 350 GX driver.
Printing with a desktop printer
■
If you are using QuickDraw GX applications, do one of the
following:
■
■
Select any desktop printer in the Print dialog box.
Drag a document onto a desktop printer icon. The application
corresponding to the document opens, prints the document, and
then quits.
■
If you are using non-QuickDraw GX applications, do one of the
following:
■
Print to the default desktop printer with the Print command from
the File menu.
■
Drag a document onto a desktop printer icon. The application
corresponding to the document opens, displays the Print dialog
box, and waits for you to click Print. After printing the document,
the application quits.
Selecting printing options
Most of the commands in the Printing menu are standard QuickDraw GX
driver commands, and are documented by Apple (see the Macintosh Guide
on-line document for details). The last group of commands in this menu are
printer-specific.
Use the Printer Driver Defaults command in the Printing menu to set
default options for the selected desktop printer.
Note
The printer defaults dialog box is also available through the Print
command in the File menu for QuickDraw GX applications.
3-18
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Using the Apple LaserWriter 8.x driver
■
■
■
From the File menu, open the Page Setup dialog box. Use the
Paper pop-up menu to select the printer’s supported paper sizes.
From the File menu, open the Print dialog box. Select media
options and paper trays in the Paper Source field.
In the Print dialog box, click the Options button to see the Print
Options dialog box. There are printer-specific features listed at
bottom of the dialog box.
User Manual
3-19
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Printing from a workstation
Overview
You can print from a UNIX or VMS workstation through Ethernet, Token
Ring, parallel, or serial interfaces. Workstation users can print from any
application that generates color PostScript.
Note
If you are printing ASCII files directly to the printer, you will
need PCL5 activated on your printer; refer to the on-line manuals
on the printer’s CD-ROM for instructions.
To use the TekColor color corrections and other printer features, use one of
the following methods:
■
PhaserPrint™ software for UNIX workstations functions like a
printer driver for selecting printing options, and provides fast
screen copy printing.
■
■
PhaserSym™ software and EasyCopy/ X for VMS workstations
provides proper communication with the printer.
The menus on the printer’s front panel let you select printing
options; refer to Chapter 7 for instructions on using the front
panel.
■
Downloadable utility files let you select printing options; refer to
the on-line manuals on the printer’s CD-ROM for instructions.
3-20
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
UNIX workstations
For UNIX environments, Tektronix offers the optional PhaserPrint™
software. PhaserPrint software offers driver-selectable printer options and
provides fast, raster file and screen copy printing to Tektronix color printers.
PhaserPrint software is available for these workstations:
Workstation
Operating System
Sun
SunOS 4.1.3, Solaris 2.3, 2.4
SGI
IRIX 4.0, 5.2, 5.3
HPUX 9.05
HP 9000 700/800
IBM RS/6000
DECstation
DEC Alpha
AIX 3.2
Ultrix 4.0, 4.4
OSF/1 1.3, 3.0
PhaserPrint software works with the workstation’s native spooling system
to print PostScript files and raster files in these formats: Sun Raster Format
(SRF), xwd, SGI RGB, and many others.
The printer’s CD-ROM contains a demonstration copy of PhaserPrint
software and an on-line instruction guide in the UNIXDEMO directory. If
you would like to purchase a licensed version of PhaserPrint software,
contact your dealer, local Tektronix office, or in the United States,
call 1-800-835-6100.
User Manual
3-21
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
VMS workstations
To print from VMS workstations, the optional PhaserSym™ utility, a VMS
print symbiont, functions as a driver for selecting printing options, and as a
queue manager. PhaserSym software is compatible with DEC workstations
running VAX/ VMS version 5.0 and later. PhaserSym software
communicates over the printer’s optional TCP/ IP Ethernet interface, and is
required for proper communication with the printer.
The optional EasyCopy/ X software provides fast raster image printing to
Tektronix printers.
For more information
■
World Wide Web: If you have access to the Internet, you can view
selected topics on the Phaser 350 printer’s web page. Access the
printer’s documentation from this web address:
http://www.tek.com/Color_Printers/userdoc/introduction.html
■
HAL: Request a document catalog from HAL or EuroHAL,
Tektronix’ automated fax systems. Refer to “Using the automated
fax systems” on page 6-2 for instructions on using HAL and
EuroHAL.
3-22
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Printing from specific applications
For printing from most applications, follow the instructions in Chapter 2 to
install drivers and printer software. Refer to the following application notes
for details on a few applications with special requirements.
General hints and tips
For hints and tips on printing from a specific application, you can get
information in the following places:
■
World Wide Web: If you have access to the Internet, you can
view selected topics on the Phaser 350 printer’s web page. Access
the printer’s documentation from this web address:
http://www.tek.com/Color_Printers/userdoc/introduction.html
■
HAL: Request a document catalog from HAL or EuroHAL,
Tektronix’ automated fax systems. Refer to “Using the automated
fax systems” on page 6-2 for instructions on using HAL and
EuroHAL.
Windows applications
Aldus PageMaker and FreeHand
Adobe PageMaker
Macromedia FreeHand
QuarkXPress
Some applications use PostScript printer description files (PPDs) to get
information about a printer. See Chapter 2 for instructions on installing the
printer’s software.
Pantone
If you are using an application that produces PANTONE Colors, see the
on-line manual on the printer’s CD-ROM for information on color library
files available for specific applications.
User Manual
3-23
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Macintosh applications
QuarkXPress
To use the printer with QuarkXPress, use the installer application on the
printer’s CD-ROM or diskettes to install the Phaser 350.PDF printer
description file. The file is installed automatically with Easy Install. Refer to
Chapter 2 for instructions on installing the printer’s software. Once the file
is installed, the printer’s name appears alphabetically in the list of installed
printers in the QuarkXPress custom Page Setup dialog box.
Adobe Photoshop
The PhaserPrint™ software plug-in operates within the Photoshop
application to improve the image data transfer time from your Macintosh to
your printer. Use the installer application on the printer’s CD-ROM or
diskettes to install the PhaserPrint software plug-in. The file is installed
automatically with Easy Install. Refer to Chapter 2 for instructions on
installing the printer’s software. Once the file is installed, select PhaserPrint
from the Export pop-up menu in the File menu, and make printing
selections. Refer to the on-line manuals on the printer’s CD-ROM for details
on using the PhaserPrint software plug-in.
Pantone
If you are using an application that produces PANTONE Colors, see the
on-line manual on the printer’s CD-ROM for information on color library
files available for specific applications
Other applications
To use the printer with Aldus PageMaker or FreeHand, and other
applications, use the installer application on the printer’s CD-ROM or
diskettes to install the PPD printer description files. Refer to Chapter 2 for
instructions on installing the printer’s software. Once the files are installed,
you can use them to set up a PPD-driven printer driver, such as the Adobe
PSPrinter or Apple LaserWriter 8.x, for your printer; see Chapter 2 for
instructions.
3-24
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Selecting print features
This printer provides several ways to select print features:
■
■
■
Through a supported printer driver (recommended)
Use these selections to override the settings on the printer’s
front panel.
From the printer’s front panel
Use these settings only when printing from a non-supported
driver.
Using PhaserLink software
If your network is running TCP/ IP and you have a World Wide
Web browser, you can use this browser to view printer status and
select printer features. Refer to the PhaserShare Status Software User
Manual for complete information.
■
Sending a PostScript utility file to the printer
Use these settings only when printing from a non-supported
driver. You can find detailed information on the printer’s
CD-ROM and the Phaser 350 printer’s web page:
http://www.tek.com/Color_Printers/userdoc/introduction.html
User Manual
3-25
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Print features quick reference: Printer’s front panel
Feature
Feature
Front Panel
descriptions
See
Print Quality Menu
Print-quality modes
■ Fast Color
■ Standard
■ Enhanced (600 x 300)*
page 3-28
TekColor Correction Menu
Color correction
■ None
■ Vivid Color
■ Display
■ SWOP Press
■ Euroscale Press
■ Commercial Press
■ Monochrome
■ Use Printer Settings
See
page 3-31
not applicable
Media size
■ A/Letter
■ A4
See
page 3-33
Printer Defaults Menu
Media tray selection
■ Auto Select
■ Upper
➥ Default Tray Menu
■ Lower
■ Paper
■ Transparency
■ Manual Paper
■ Manual Transparency
not applicable
Quick Collate*
See
page 4-12
See
page 4-14
Printer Defaults Menu
➥ Check Print
➥ Check Print Timeout
Check Print*
■ Enabled
■ Disabled
See
page 4-16
Image Smoothing
■ Enabled
■ Disabled
* These features are available with the printer’s Extended Features option only.
3-26
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Print quality modes
Using the printer drivers provided with your printer, you can select from
three print quality modes:
Fast Color Produces the fastest full-color printing on paper at
6 pages per minute (ppm). This print-quality mode is not available for
transparency printing. Transparency prints made with this setting are
printed using the Standard print-quality mode instead.
Standard The default print-quality setting for full-color printing on paper at
4 ppm and transparencies at 2 ppm. Select this print-quality mode when
printing transparencies for the most vibrant, saturated colors but less fine
detail.
*Enhanced (600 x 300) Available with the Phaser 350 printer’s Extended
Features option. For paper printing, select this print-quality mode for the
best text quality and the smoothest color blends at 2 ppm. For transparency
printing, select this print-quality mode for transparencies containing small
text and fine lines.
* If you select Enhanced (600x300) mode but do not have the Extended Features
option and sufficient memory installed, prints are made in Standard mode.
User Manual
3-27
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Color corrections
The printer provides TekColor Dynamic Correction software, which consists
of the following color correction modes:
Color correction mode
Description
None
No correction made to colors.
Vivid Color
Display
Default setting. Produces the brightest possible colors.
Adjusts color to closely approximate the colors on a
standard display screen.
SWOP Press
Specification for Web Offset Publications. Typically used
to match U.S. press standards.
®
Euroscale Press
Commercial Press
Monochrome
Used to match equivalent 3M Matchprint proofs.
®
Used to match commercial 3M Matchprint proofs.
Prints a color image as a monochrome gray scale.
Outputs color page masters in black-and-white for
photocopying.
Use Printer Setting
Uses the color correction mode specified in the printer’s
front panel setting rather than any printer driver setting.
Vivid Color, the default color correction mode, is generally recommended
for typical office printing.
You can view an approximate sample output of some color corrections at the
bottom of the printer’s startup page. Refer to “Startup Page” on page 7-6 for
more information.
Note
If your printer is networked and you have changed the front panel
settings, make sure that you tell other users on the network.
Printer settings affect all prints made with non-supported
drivers.
3-28
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
All about media
The printer prints on Letter- and A4-size office paper, Tektronix-supplied
transparencies, and full-sheet, peel-off label stock (such as Avery 5160).
Tektronix premium and standard grades of transparency media are
designed to provide optimal image quality and reliable operation. Tektronix
premium transparency media offers enhanced ink adhesion and print
quality for overhead transparencies.
Note
Tektronix inks and transparencies are formulated for use with this
printer to ensure the best print quality and long-term reliability.
Tektronix does not guarantee printer performance on
non-Tektronix transparency media.
For information on ordering Tektronix’ paper and transparency media, refer
to the supplies information sheet included with your printer.
Caution
To avoid damaging your printer, do not use perforated paper,
three-holed paper, legal-size paper or envelopes.
Do not use transparency media intended for ink-jet or
thermal-wax printers.
Never attempt duplex (two-sided) printing on any type of
media. Ink already present on the media will offset onto the
internal paper path, requiring you to perform cleaning
procedures.
You can recycle the paper printed on this printer the same way you would
recycle paper from any laser printer.
User Manual
3-29
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Media size and weight
The standard paper trays, optional transparency trays, the optional Lower
Paper Tray Assembly trays and manual feed slot accept two sizes of media:
Letter/ A-size (8.5 x 11 in.) and A4-size (210 x 297 mm). Refer to “Margins
and image area” on page 3-31 for details on the size of the image area.
The following table presents guidelines you should follow when selecting
media to use with the printer.
Tray type
Paper type
Transparency
Label media
Letter or A4
paper trays
Bond
Supported
(50-sheet capacity)
Full-sheet laser
printer labels
16 – 32 lb.
(60 – 120 g/m2)
Letter or A4
transparency trays
Not supported
Supported
(175-sheet capacity)
Not supported
Not supported
Lower Paper
Bond
Not supported
Tray Assembly
16 – 32 lb.
(60 – 120 g/m2)
Manual feed
Bond
Supported
Full-sheet laser
printer labels
16 – 32 lb.
(60 – 120 g/m2)
Non-glossy Cover
50 – 80 lb.
(135 – 220 g/m2)
3-30
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Margins and image area
The image area is the part of the media where the image appears. When the
printer places an image on the media, the image area is a bit smaller than the
actual media size. You may need to adjust the page margins in your
application software to match the image area. The printer must be set for the
correct size media through the printer driver.
The image area for the Phaser 350 printer is 8.11 x 10.45 in. (Letter-size) and
200 x 283 mm (A4-size). The difference between the image area and the
media size for the top margin and side margins is 5 mm (0.2 in.). The bottom
margin is 9 mm (0.35 in.).
Note
For maximum print speed, set left and right margins to 0.3 in.
(7.4 mm) or larger.
The following illustration shows the image area and top, side and bottom
margins.
1. Letter-size: 8.5 x 11 in.
2. A4-size: 210 x 297 mm
1
2
5 mm (0.2 in.)
8.11 in.
5 mm (0.2 in.)
200 mm
10.45 in.
283 mm
9 mm (0.35 in.)
9 mm (0.35 in.)
9101-14
User Manual
3-31
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Media and ink handling tips
■
Keep the media supplies, trays, and ink in covered containers.
Dust and dirt can be transferred to the paper or transparency
media, resulting in poor print quality.
■
■
■
■
Handle transparencies by the edges and with both hands to avoid
fingerprints and creases, which can result in poor print quality.
Place slip sheets between printed transparencies or use a
protective cover to prevent contact between transparencies.
To avoid having the paper stick together, gently fan the paper
before loading it into the paper tray.
Paper that has been sitting out of its sealed wrapper can become
distorted, causing paper jams. Keep paper sealed until you are
ready to use it for printing.
■
Do not use paper that has been creased or wrinkled.
3-32
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Media trays
Standard paper trays. The printer is shipped with a standard Letter- or
A4-size paper tray which holds 200 sheets (slightly less than one-half ream)
of paper.
Note
The standard paper trays are designed for use with paper media.
You can use a standard paper tray for printing up to 50
transparency sheets. However you must use a Tektronix printer
driver to specify Transparency as the media type and confirm the
print at the front panel. Following these steps ensures the highest
transparency print quality.
Transparency trays. If you print on both paper and transparencies, consider
ordering a separate, dedicated transparency tray. This lets you quickly
switch between paper and transparency print jobs by simply swapping
media trays in the printer. Optional Letter- and A4-size transparency trays
have a capacity of 175 sheets (approximately three boxes). Refer to
“Optional media trays” on page 8-6 for ordering information.
Lower PaperTray Assembly. An optional Lower Paper Tray Assembly extends
the printer’s capabilities. Its 500-sheet capacity adds to the 200-sheet
capacity of the standard paper tray for high-volume printing environments.
When the upper tray is loaded with a second media type such as
transparencies or letterhead, the printer then supports printing of two media
types without the need to swap trays.
Note
The Lower Paper Tray Assembly only accepts paper media; it
should not be used with label stock or transparency media.
User Manual
3-33
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Establishing a default media tray (optional)
When you add the Lower Tray Assembly to your printer, you then have the
option of selecting which tray (the upper or lower) will be the default media
tray for printing. You can set the default media tray selection through the
printer’s front panel menu or a PostScript utility file. Refer to the printer’s
CD-ROM for more information on downloading utility files. When using a
supported printer driver, explicit driver selections override the printer’s
default media tray setting.
When the Lower Paper Tray Assembly is first installed, the default media
tray selection is set to AutoSelect. With this selection, the printer
automatically switches to the upper tray if the Lower Paper Tray Assembly
becomes empty. If a paper tray of the same size exists in the upper tray slot,
then printing resumes. However, if the transparency tray is installed, then
the printer prompts you to load paper in the Lower Paper Tray Assembly.
Other default media tray selections (Upperand Lower) let you explicitly set
printing from the upper or lower tray with no automatic tray switching
capability. This is valuable if you have, for example, common office paper in
the Lower Paper Tray Assembly and letterhead in the upper paper tray. You
can have the default media tray selection set for printing office paper in the
lower tray. When you want to print on letterhead in the upper tray, you will
need to change the default media tray setting to Upper. (Supported printer
driver users can choose between the upper and lower trays directly from the
printer driver.)
If you attempt to print transparencies using a non-supported driver, the
printer uses the printing mode of the tray (paper) and produces
unsatisfactory results. To print transparencies from the upper paper tray,
use a supported printer driver and explicitly select Transparency, or
purchase a dedicated transparency tray. Refer to “Optional media trays” on
page 8-6.
3-34
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Printing letterhead
Letterhead must be loaded face up in the standard paper tray with the
bottom edge of the page closest to the paper tray handle.
12345678
9101-17
Caution
Some letterhead may be printed using ink that will offset onto
printer internal parts during the overprint, requiring you to
perform cleaning procedures. Run several test sheets of
letterhead to check for letterhead smearing before attempting a
large print job.
User Manual
3-35
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Printing transparencies
Tektronix transparency media is recommended for use in this printer, as it
provides optimal image quality and reliable printer operation. Tektronix
premium transparency media provides enhanced ink adhesion and print
quality. Load transparency media in the appropriate Letter- or A4-size
paper tray. For best results, Tektronix recommends that you order the
optional transparency tray. (Refer to Chapter 8 for ordering information.)
A label inside the transparency tray indicates the tray’s maximum
transparency capacity.
Note
Do not use transparency media intended for ink-jet or
thermal-wax printers. For best results, use Tektronix
transparency media.
Tektronix premium transparencies must be loaded face up in the media tray
with the notched corner of the sheet in the back-right corner of the tray.
Tektronix standard transparency media is not notched and can be loaded
into the tray in any orientation.
9101-72
3-36
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Transparency quality tips
■
Select the Standard print-quality mode in the printer driver for
the most vibrant, saturated colors on transparencies. Use the
Enhanced (600 x 300) print-quality mode (Extended Features
option) for transparencies containing small text and fine lines.
■
■
Use large type on overheads; 18-point type or larger works well.
Use yellow or other light colors for text on solid-color
backgrounds.
■
Place slip sheets between printed transparencies or use a
protective cover to prevent contact between transparencies.
Note
Do not load transparencies in the Lower Paper Tray Assembly. To
avoid a jam condition, do not re-use transparencies that have been
fed through the printer once (for example, after a jam or if the
transparency was ejected without being printed).
1. If you are using the optional transparency tray for printing
transparencies, load up to 175 transparencies (approximately three
boxes) and install the transparency tray in the printer.
When you print, use a supported printer driver and specify
Transparency to obtain the correct print mode for transparency
media. The printer senses the presence of the transparency tray
and prints correctly without further interaction.
2. If you are using the standard paper tray for printing
transparencies, replace the paper in the tray with up to 50
transparency sheets and install the paper tray in the printer.
When you print, use a supported printer driver and specify
Transparency to obtain the correct print mode for transparency
media. The printer senses the mismatch of the transparency
media loaded in the paper tray and asks you to confirm the print
through the printer’s front panel.
Caution
Never attempt two-sided or two-pass printing on any type of
media. Ink already present on the media will offset onto the
internal paper path, requiring you to perform cleaning procedures.
User Manual
3-37
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Manual feed printing
1. Select Manual Feed from a supported printer driver.
2. Click on the Print button.
3. Go to the printer and open the manual feed cover using the
recessed finger tab.
4. Adjust the guide on the inside of the manual feed cover to match
the Letter- or A4-size media you are using.
3
4
LETTER
A4
9101-47
3-38
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Manual feed letterhead: When you manually feed letterhead, orient the
letterhead face down and feed the bottom edge first.
Manual feed transparencies: When you manually feed Tektronix premium
transparencies, orient the transparency notch closest to you with the notch
on the right side. The standard Tektronix transparency media is not
notched.
5. When prompted by the front panel, insert one sheet of paper or
transparency media until it stops.
6. After the first sheet enters the printer, wait for the front panel to
prompt you again before feeding the next sheet (approximately
5 seconds).
5
6
LETTER
A4
5 Sec.
L
E
T
T
E
R
A
4
9101-18
Note
A jam error will occur if you feed the second sheet of media into
the manual feed slot before the front panel prompts you.
User Manual
3-39
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Printer languages: PostScript, HP-GL, PCL5
The printer supports PostScript Level 1 and Level 2, and HP-GL
(Hewlett-Packard Graphics Language) printer languages. Additionally, the
printer supports the monochrome PCL5 (Printer Command Language)
printer language as a separately enabled option. Refer to the CD-ROM or
Tektronix’ World Wide Web site for details on enabling the PCL printing
option.
The default language for the parallel port is PostScript. For information on
default language for other interface ports, refer to the PhaserShare Network
Cards and Software System Administrator Manual.
If you want to print HP-GL or PCL5 files on a port set to PostScript, you
must set up that printer port for that type of data or enable Adobe
IntelliSelect™ automatic language selection. Refer to the CD-ROM or
Tektronix’ World Wide Web site for instructions.
If automatic language selection is enabled, you can send PostScript, HP-GL,
and PCL5 files (when enabled) to the printer and the printer automatically
detects the type of file and prints it. You can change the default language so
that the next time you turn on the printer, it is set to receive PostScript,
HP-GL, or PCL5 data on a specific port.
The printer has default values for the HP-GL parameters, such as pen color
and pen width. However, you can change these values. Refer to the
printer’s CD-ROM or Tektronix’ World Wide Web site for instructions.
3-40
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Fonts
For general information on fonts, you can request a document catalog from
HAL or EuroHAL, Tektronix’ automated fax systems. Refer to “Using the
automated fax systems” on page 6-2 for instructions on using HAL and
EuroHAL.
Resident typefaces (PostScript)
The printer accepts Adobe Type 1 and Type 3 downloadable fonts, TrueType
fonts, PCL5 (optionally enabled), and a variety of user-defined fonts. To
extend font capability, the printer supports a SCSI-connected external hard
disk for storage of additional fonts. Refer to the printer’s CD-ROM or
Tektronix’ World Wide Web site for more information.
The Phaser 350 printer’s standard configuration is shipped with a set of 17
resident fonts in these typeface families: Courier, Helvetica, Helvetica
Narrow, Times and Symbol.
9101-19
User Manual
3-41
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Printer’s Extended Features option
If you have the printer’s Extended Features option, ATM software and 52
additional fonts are included on the printer’s CD-ROM. ATM software
helps your computer to display these fonts on screen as they will appear in
your prints. Follow the instructions on the CD-ROM to install and use the
fonts. Refer to “Extended Features upgrade” on page 8-4 for more
information. The following fonts are optionally available with the Extended
Features option:
9101-64
3-42
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Resident typefaces (PCL5)
For PCL5 (Printer Command Language) printing (HP Laserjet III emulation),
the printer supports Courier, Times, and Universe typefaces in medium,
bold, italic medium, and italic bold. Printing of PCL5 files is supported as a
separately enabled option.
You can determine if the PCL5 language is enabled for your printer by
checking the printer’s configuration page. Refer to “Help Pages overview”
on page 2-29 for information on printing the configuration page. Refer to the
printer’s CD-ROM or Tektronix’ World Wide Web site for details on enabling
the PCL printing option.
Downloading fonts
The fonts resident in the printer are stored in the printer as outlines and are
always available for printing. The PostScript interpreter in the printer can
also accept and store additional fonts known as downloadable fonts. If you
want to print PostScript outline fonts that are not built into the printer, you
can transfer or download outline fonts from your computer to the printer.
Downloading fonts saves print time if you plan to print several documents
or a large document using those fonts.
When you download a font, it is stored in the printer’s memory or on a SCSI
hard disk attached to the printer. Refer to the printer’s CD-ROM for more
information on using an external SCSI disk for font storage. You can
download as many outline fonts as the printer’s memory or hard disk allow.
Adding more printer memory expands the number of fonts that can be
downloaded to the printer.
The printer accepts Type 1 and Type 3 downloadable fonts including those
from Adobe, Agfa, Bitstream, Microsoft, Apple, and many others.
The printer also accepts TrueType downloadable fonts which can be scaled
to any point size. TrueType fonts look the same on the screen as they do
when printed.
You download a font from a PC or Macintosh the same way you download
fonts to any PostScript printer. Follow the documentation that was shipped
with your fonts.
User Manual
3-43
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
Macintosh screen fonts
Note
If you already have these fonts installed on your computer, you
don' t need to install them again.
The printer’s diskettes and CD-ROM for the standard version of the printer
contain screen fonts for the printer’s standard 17 fonts. The CD-ROM
shipped with the Extended Features option of the printer contains the Adobe
Type Manager (ATM) with 69 fonts.
You need to install the screen fonts on your computer if you want to see the
printer's standard resident typefaces on the Macintosh screen. If you select a
font the printer doesn't have, the Macintosh creates a representative font
for printing.
1. Use either the Phaser 350 printer’s diskettes or CD-ROM.
■
Floppy diskettes: Insert the Printer Software for Macintosh
diskette into your computer’s disk drive.
■
CD-ROM: Insert the Phaser 350 printer’s CD-ROM into your
computer’s CD-ROM drive.
2. Double-click the Phaser 350 Installer icon. Click Continue until
the Easy Install window appears.
3. To automatically install the printer’s screen fonts and other printer
software, click Install in the Easy Install window.
Or, select Custom Install from the pull-down menu (available
with the installer on the CD-ROM only). Then select the Screen
Fonts item, and click Install.
Fonts are installed in the Fonts folder inside your System Folder.
4. Select the printer font you want to use within an application and
see the same font on the screen.
3-44
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Basics
3
Using fonts with Windows
Before printing, you need to make sure the fonts specified in your document
are installed in the printer or are set up correctly in Windows. If you request
a font in an application that is not resident in the printer, or is not correctly
installed in Windows, the text is printed in the Courier typeface. Or, to use
fonts that are not resident in the printer, do one of the following:
■
■
Use a font downloader supplied with your font package to
download the desired font to the printer.
Edit your WIN.INI file so the Windows driver automatically
downloads the fonts you need as part of a print job. Refer to your
Microsoft Windows documentation for details on this procedure.
Some font packages automatically update the PostScript port
entries in your WIN.INI file when you reinstall the fonts. Refer to
the font package’s documentation for instructions.
For more information on using fonts with Windows, request a document
catalog from HAL or EuroHAL, the Tektronix automated fax systems. Refer
to “Using the automated fax systems” on page 6-2 for instructions on using
these systems.
Printing font samplers
Printing a font sampler from a Macintosh
You can print a sample of the printer’s resident fonts by downloading the
Fonts Sampler utility file to the printer.
Note
If you are using QuickDraw GX and System 7.5, you can print
the fonts sampler from the Tektronix Phaser 350 GX printer
driver.
1. Install the sampler and utility files from either the Printer
Software for Macintosh diskette or the printer’s CD-ROM; see
Chapter 2 for details.
2. Select the appropriate printer in the Chooser.
User Manual
3-45
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Printing Basics
3. Locate the LaserWriter Utility in the PhaserTools folder on your hard
disk, and double–click its icon to start the application.
4. Choose Download PostScript File from the Utilities menu.
5. Select the Font Sampler file from the list, then click Open. (This file
was installed in the Samplers folder inside the PhaserTools folder.)
6. If no output is returned by the printer, the LaserWriter Utility
displays a dialog box; click OK to continue.
Printing a font sampler from a PC
You can print a sample of the printer’s resident fonts by downloading the
FONTS.PS utility file to the printer.
1. Locate the FONTS.PS file in the SAMPLERS directory either on the
printer’s CD-ROM or the Printer Software for Windows diskette.
2. Copy the FONTS.PS file to your hard disk or use the file directly
from the CD-ROM.
3. Use one of the following methods to send the FONTS.PS file to
the printer:
■
PC users: Use the DOS COPY command to send the file to the
printer. (Windows 3.1 users can also use the Copy command in the
File Manager.)
■
Workstation users: Send the file to the printer as you would any
PostScript file.
3-46
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
4
Printing:
Beyond the Basics
This chapter discusses the following topics:
■
■
■
■
■
■
Working with color
TekColor corrections — making the best selection
Using color sampler charts
Using the Quick Collate option
Previewing with Check Print
Using Image Smoothing
User Manual
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Printing: Beyond the Basics
Working with color
Whether you are producing color reports, memos, graphs, charts, overhead
transparencies for presentations, color handouts, or design comps, there are
a few things to keep in mind when using color.
■
■
■
■
A large area of color looks more saturated (brighter) than a small
area of the same color.
A color looks brighter against a dark background than it does
against a white background.
Colors look different due to the background color or to the
surrounding colors.
The appearance of a color varies with the type and amount of
light, for example fluorescent lighting versus sunlight.
General guidelines
■
Keep a document or design simple and consistent.
■
Select colors that look good together and that reinforce your
message.
■
■
Check your application for standard palettes to get you started.
Use a color scheme of five or six shades, and in a series of images,
use the colors in a consistent manner throughout the series.
■
■
Use color to highlight the most important information, such as a
bar or pie segment in a chart or graph.
Use color to show relationships between objects, such as a range of
values. Objects with a similar meaning or value should be in
similar colors.
■
■
Use color as graphic elements in the design of newsletters, logos,
and brochures.
Avoid red and green combinations; these colors are hard for
people with red/ green color blindness to distinguish.
4-2
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing: Beyond the Basics
4
TekColor corrections — making the best selection
The printer’s TekColor color correction options provide simulations of
different color devices. Follow these basic guidelines so that the printer
accurately reproduces the colors you want on your prints.
■
■
■
For typical business and office printing, select the Vivid Color
option before printing.
For engineering and scientific imaging applications, try printing
with the Simulate Display option.
For graphic arts purposes, there are three printing press standards
to choose from: SWOP Press (Specifications for Web Offset
Publications), Commercial Press and Euroscale Press.
Color corrections can be selected from printer drivers, set in the printer with
downloadable utility files, or set from the printer’s front panel.
TekColor color corrections are performed in the printer. To use ColorSync
color matching on a Macintosh, or to use host color correction in
Windows 95, refer to the printer’s CD-ROM or Tektronix’ World Wide Web
site for additional information.
Note
TekColor color corrections do not affect colors specified in the
PostScript Level 2 international color standard CIE XYZ
developed by the Commission Internationale de l’Eclairage
(International Commission on Illumination).
User Manual
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Printing: Beyond the Basics
Deciding which color correction to use
Color printers and computer display screens produce color differently.
Printers use the subtractive primaries CMYK (cyan, magenta, yellow, and
black), and produce color when light is reflected off the paper. Computers
use the additive primaries RGB (red, green, blue) with a light-emitting CRT
screen. The printer and the computer screen each have a different range of
possible colors they can produce, with some overlap between them.
Software application packages specify color in different ways, for example
as CMYK or RGB, or they may give you a choice. Get to know your
applications so you can work more efficiently.
The TekColor color correction options are available for a finer degree of
control over color. Since no single color correction option can address all
uses, refer to the following table for the description that best fits your
printing situation, and try the suggested color correction.
4-4
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing: Beyond the Basics
4
Printing objective or problem
Turn off all color corrections
Color correction to use
None
Using PANTONE Colors
Brightest, most vibrant colors
Vivid Color
Overhead transparency presentations
Blue colors are printing too purple
Colors are washed out or faded
Colors should match computer display screen*
Colors are too dark
Simulate Display
Colors should match a printing press standard
SWOP Press
Euroscale Press
Commercial Press
Print in gray scale
Monochrome
Use printer’s current color defaults
Use Adobe’s standard color conversions
Use Printer Setting
Raw CMYK
Raw RGB
* For other ways of matching the screen’s colors, use ColorSync color matching on a Macintosh or
use host color correction in Windows 95 (refer to the printer’s CD-ROM or Tektronix’ World Wide
Web site for more information).
User Manual
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Printing: Beyond the Basics
Color correction descriptions
Turning off all color corrections
If you do not want to use any TekColor color corrections, you can specify no
corrections from a supported driver, or with utility files, or from the printer’s
front panel. Select None when you are doing the following:
■
■
Using applications that do their own color adjusting
Using ColorSync on a Macintosh or host color correction in
Windows 95
■
Printing PANTONE Colors
Printing the brightest colors and a truer blue
The Vivid Color option is the best choice for typical office printing. This
option also makes printed blue appear less purple by reducing the amount
of magenta used to print blue colors. Other colors in the cyan-blue-purple-
magenta range in the image are also adjusted to compensate for the adjusted
blue. Colors in the red-orange-yellow-green range are not affected. This
selection is good for making presentation graphics, such as overhead
transparencies, and for bright-looking colors that don’t need to match the
screen’s colors or printing press colors.
Vivid Color adjusts CMYK colors using a method that adds black to other
components. This option prints more saturated (darker) colors and may be
useful for printing overhead transparencies for presentations from some
applications, such as CorelDRAW!. Use this option if you have specified a
color in the CMYK system, and the color has a black component, and the
color appears lighter than you expected when printed.
4-6
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing: Beyond the Basics
4
Simulating display screen colors
The Simulate Display option makes printed colors approximate the colors on
a standard display screen. This selection should improve the
screen-to-printer color accuracy for most applications that don’t perform
their own color corrections. This selection is best for applications that define
colors as RGB (red, green, blue), HLS (hue, lightness, saturation), or HSB
Closely match printing press colors
There are three printing press color correction options. Each press option
conforms to a different printing standard. Use a press option if you are
previewing work for a four-color job to be printed on a printing press. These
options simulate a four-color commercial printing press, not solid spot
colors, such as PANTONE Colors.
Note
If you are selecting PANTONE Colors in your application, use
the None option; see page 4-6 for details. Also, use the None
option with other color management systems, such as EfiColor.
Printing press color corrections
Press option
SWOP Press
Inks
Base (paper)
Target match (equivalent 3M Matchprint®)
SWOP/soy publication
Specification for Web Offset Publications
These are specifications for color separation films
and color proofing that are used to ensure the
consistency of printed colors between different
publications. This option is typically used in the U.S.
Tends to be high-volume, web press printing.
Commercial Press commercial commercial
This option is typically used in the U.S., and is
characterized to match commercial 3M Matchprint
proofs.
Tends to be high-quality, sheet-fed printing.
Euroscale Press
Euroscale
publication
This option is typically used in Europe, and is
characterized to match the equivalent 3M
Matchprint.
User Manual
4-7
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Printing: Beyond the Basics
Printing in gray scale
The Monochrome option prints your color image as a monochrome gray
scale (shades of gray between black and white). Use this option to print
page masters for photocopying in black-and-white.
Using the printer’s current color defaults
The Use Printer Setting option is available only in the supported drivers.
This option sends no color correction information to the printer. It uses the
current default in the printer to process colors for printing. The printer’s
default can be one of the following:
■
■
Any option selected in the TekColor Corrections menu on the
printer’s front panel.
One of the color correction utility files sent to the printer.
Using simple color conversions
The following utility files use Adobe’s standard color conversions to tell the
printer what type of output device you want it to simulate:
■
Raw CMYK Colors (RAWCMYK.PS): Converts all colors (CMYK,
RGB, grays) to CMYK colors. Use this file if your application
specifies colors as CMYK (cyan, magenta, yellow, and black).
This file lets you control the CMYK output of the printer’s colors
without using any TekColor color corrections.
■
Raw RGB Colors (RAWRGB.PS): Converts all colors (CMY, CMYK,
grays) to RGB colors. Use this file if your application specifies
colors as RGB (red, green, and blue). This file lets you control the
CMY output of the printer’s colors without using any TekColor
color corrections.
Note
Refer to the on-line documentation on the printer’s CD-ROM for
instructions on installing and using the utility files.
4-8
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing: Beyond the Basics
4
Special considerations
If your Phaser 350 printer is shared on a network
Another user may use the downloadable color correction utility files, or the
printer’s front panel, to change the printer’s default color correction setting.
If this situation occurs, the prints you make through a non-supported driver
may not print as expected. Refer to “Sharing the printer on a network” on
page 6-39 for details on how the color corrections interact with the driver
settings for either supported or non-supported drivers.
Application color corrections
Some applications perform color corrections to improve screen-to-printer
color matching. The TekColor color correction options in the supported
drivers adjust colors in the printer after the application has performed its
color corrections.
■
■
■
If the application uses CIE (Commission Internationale de
l’Eclairage) colors, the TekColor corrections will not be applied.
If you select a TekColor color correction option in a driver other
than None, the selection may override some application features.
If you try one of the TekColor color correction options in a
supported driver and the printed results are not what you
expected, then select the None option and try reprinting your
image.
■
Select the None TekColor color correction option in a supported
driver if you are using ColorSync color matching on a Macintosh
or host color correction in Windows 95 (refer to the printer’s
CD-ROM or Tektronix’ World Wide Web site).
If you are using an unsupported driver
If you are not using one of the printer drivers shipped with the printer, or
another PPD-driven driver, then use the downloadable utility files or the
printer’s front panel to select color corrections.
User Manual
4-9
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Printing: Beyond the Basics
Printing and using the color sampler charts
You can print color sampler charts from your printer to see how the colors,
as specified from within an application, will look when printed. Having a
pre-printed sample of each color can help you save time in selecting the right
color for your use.
The printer’s color sampler files are available from a variety of sources,
according to the following table:
Printing color sampler charts
Color Sampler Charts
Print from the
front panel
Print from CD-ROM and
Diskettes
Download from World-Wide Web
Visit the Tektronix web site:
See page 2-29.
See “Printing the Color Sampler
http://www.tek.com/Color_Printers/support/
or use PhaserLink software to print sampler
charts from your web browser.
Charts” on the CD-ROM.
CMYK sampler chart
(cyan, magenta, yellow,
and black color model)
√
√
√
√
√
√
√
√
√
√
RGB sampler chart
(red, green, and blue color
model)
HSB sampler chart
(hue, saturation, and
brightness color model)
Not available
Not available
PANTONE sampler chart
4-10
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing: Beyond the Basics
4
Each color sampler chart is several pages long; the pages can be connected to
form a wall chart or placed in a binder for easy reference.
User Manual
4-11
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Printing: Beyond the Basics
Using the Quick Collate option
The Quick Collate option in the supported drivers performs document
collation in the printer. This is faster than the collate option that exists in
some applications because applications send each page to the printer in
sequence, as many times as necessary to provide the requested number of
copies. With the Phaser 350 printer’s Quick Collate option, the job is sent
only once, and then multiple collated sets are produced by the printer.
Note
The Quick Collate feature requires that the printer be configured
with the Extended Features option. The printer must also be
connected to a specific external SCSI hard disk before collation is
possible. Refer to “Optional media trays” on page 8-6 for ordering
information.
Application collation
1
2
Application
file
3
Set 1
1
Application
file
2
3
Set 2
Phaser 350 Printer Quick Collate option
1
1
2
2
Application
file
3
3
Set 1
Set 2
4-12
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing: Beyond the Basics
4
The number of pages that can be collated at one time depends on
these factors:
■
■
The number of hard disks attached to the printer.
Complexity of the pages to be collated.
According to these factors, the printer collates in sequential sets as many
pages as will fit in the available disk space. For example, you have a
150-page job and you request 4 copies. Because the print job is very
complex, all of its description will not fit on the hard disk. In this case, the
printer divides the job into two segments and prints in this manner:
4 sets of pages 1 through 99
➊
1
1
1
1
99
99
99
99
Set 1
Set 2
Set 3
Set 4
4 sets of pages 100 through 150
➋
100
100
100
100
150
150
150
150
Set 1
Set 2
Set 3
Set 4
Quick Collate and the Check Print option
When you use the Phaser 350 printer’s Quick Collate option in combination
with the Check Print option, only the first page of the first set is printed
before pausing for review.
User Manual
4-13
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Printing: Beyond the Basics
Previewing with Check Print
This feature is available only with the printer’s Extended Features option.
When sending a multiple-page file to the printer through the driver, you can
select Check Print to preview the first page of the job and determine if the
job is printing as expected before proceeding with the remainder of the job.
This is especially useful when printing a large job.
The ability to access Check Print from the driver is enabled and disabled in
the printer’s front panel. You can also set the timeout in the front panel (the
timeout is the amount of time the printer will wait after sending the first
page of a file, before it continues with the remainder of the job).
By default, access to Check Print is enabled, with a default timeout of
5 minutes.
Refer to “Front panel menu map” on page 7-5 for information on navigating
the front panel menus. Use the following instructions to select the
Check Print option in the printer driver:
1. Select Check Print in a supported driver:
■
Windows 95 PostScript driver:
Select Check Print options in the Printer features field in the
Device Options tab options.
■
■
Adobe PS3 driver for Windows 3.1:
Select Check Print options in the Features tab options.
LaserWriter 8.x driver:
Select the Check Print option in the Options dialog box available
by clicking the Options button in the Print dialog box.
■
■
Phaser 350 driver:
Select the Check Print option in the TekColor Options dialog box
available by clicking the TekColor button in the Print dialog box.
Phaser 350 GX driver:
Select the Check Print option in the TekColor printing extension in
the Print dialog box (or in the Printer Driver Defaults dialog box
available from the Printing menu).
4-14
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing: Beyond the Basics
4
2. Check your first print. At the Check Print message on the
printer’s front panel, press one of the buttons:
■
Reprint: Reprints the first page, then the printer pauses again for
the duration of the selected timeout or until you press one of the
buttons.
■
■
Cancel: Cancels the print job.
Continue: Continues printing the entire print job.
User Manual
4-15
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Printing: Beyond the Basics
Using Image Smoothing
Image Smoothing blends the adjacent colors in an image so that color
transitions are less noticeable. Image smoothing is typically used when the
image being printed is at a lower resolution than the printer’s output
resolution. For example, printing an image downloaded from the
World-Wide Web at 72 dpi using the printer’s Standard print-quality mode
(300 dpi). Images printed using Image Smoothing will appear with less
sharp detail but with smoother color transitions. Image Smoothing is not
recommended for printing 300-dpi or 600-dpi images.
There are two ways of selecting Image Smoothing:
■
■
In a supported printer driver, check the Image Smoothing box on.
Download a PostScript utility file to the printer to turn on Image
Smoothing. Use the following utility files for your computer type:
Macintosh file name
PC file name
Image Smoothing On
Image Smoothing Off
SMOOTHON.PS
SMOOTHOFF.PS
Refer to the on-line manual on the printer’s CD-ROM for
instructions on downloading utility files.
4-16
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
5
Caring for Your Printer
Overview
This chapter describes the following topics to help you care for the printer
and keep it in peak operating condition:
■
Adding ink
Add ink when the ink level drops to one-half stick. The front
panel displays an Ink Lowmessage telling you when to add ink.
■
Emptying the waste tray
Empty the excess ink from the waste tray when a front panel
message tells you that the waste tray is full or anytime you remove
the maintenance tray.
■
■
■
Replacing the maintenance tray
Replace the maintenance tray when a front panel message tells
you that the maintenance tray is low, approximately every
12,500 prints.
Cleaning the printer
Describes how to clean the printer to solve specific print problems:
light stripes or missing colors, ink smears on prints, and problems
picking paper or transparencies from the media tray.
Moving the printer
Describes the steps you must take to properly move the printer
from one location to another.
User Manual
5-1
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
Adding ink
Approximate time to complete: 1 minute
The printer is shipped already loaded with Phaser 340/ 350 ColorStix
solid-ink sticks. The front panel displays a message telling you when the
printer is low on ink, giving you time to reorder. When the printer is out of
ink, it displays an Out of Inkmessage. Add up to three ink sticks of each
color to the printer before continuing to print.
1. Open the top cover.
2. Drop the appropriate color Phaser 340/ 350 ColorStix ink stick into
the ink loading bin that appears low. Each ink stick is uniquely
shaped to fit into the correct ink-loading bin.
1
2
9101-21
3. After loading the appropriate color ink stick, a front panel
message directs you to close the top cover.
5-2
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
The print-quality setting and ink coverage per print affect the printer’s ink
consumption. For typical office document printing using the printer’s Fast
Color print-quality mode, you’ll use one of each color ColorStix ink stick to
print approximately 1250 pages. To reorder additional ink sticks, contact
your local dealer or, in the United States, call Tektronix at 1-800-835-6100 to
locate a dealer near you.
Printer ink sticks
016-1307-00
016-1308-01
016-1309-01
016-1310-01
Phaser 340/350 ColorStix solid ink — 3 Black sticks
Phaser 340/350 ColorStix solid ink — 3 Cyan sticks ★
Phaser 340/350 ColorStix solid ink — 3 Magenta sticks ★
Phaser 340/ 350 ColorStix solid ink — 3 Yellow sticks ★
★ Free Black ColorStix Ink: Three Phaser 340/350 ColorStix Black ink sticks are shipped free of
charge with every order of Cyan, Magenta or Yellow ColorStix Ink. To order Black ColorStix ink
separately in the United States, call Tektronix at 1-800-835-6100.
Ink handling tips
■
To ensure optimum print quality and best performance, leave the
printer turned on overnight and during weekends. This reduces
cleaning cycles which consume ink.
■
■
Keep ink sticks clean by storing them in their original containers
until you are ready to use them.
The ColorStix ink sticks will break if dropped; handle them with
care.
Caution
Do not load used ink into the printer. Reusing waste ink ruins
the printhead and invalidates the printer’s warranty.
Discard broken ink sticks. Loading broken pieces of ink sticks
can cause the ink-loading system to jam.
Use only Phaser 340/350 ColorStix ink sticks. The Phaser 350
printer cannot be used with solid-ink ColorStix intended for
other printers.
User Manual
5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
Emptying the waste tray
Approximate time to complete: 3 minutes
The waste tray fits inside the maintenance tray which is located behind the
front cover. You should empty the waste tray anytime you remove the
maintenance tray or when the front panel displays the following message:
Waste Tray Full
Open Front Cover
1. Open the front cover.
9101-22
Caution
Some surfaces inside the printer may be hot. Be careful not to
touch the areas marked with this caution icon:
5-4
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
2. When you open the front cover, the following message appears:
Waste Tray Full
Remove Maintenance Tray
3. Grasp the maintenance tray by the front edge and lift up while
sliding it out of the printer.
9101-53
Note
Once the maintenance tray has been partially used, it will leak
drum fluid if tipped. Place the maintenance tray on a flat surface
after removing it from the printer. Contact with the drum fluid
poses no known health risk. Refer to “MSDS for silicone oil” on
page 9-6 for more information.
User Manual
5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
4. Lift one corner of the waste tray handle to release it from the
maintenance tray; remove the waste tray from the maintenance
tray.
5. Empty the contents of the waste tray by twisting it. Used ink is
nontoxic; it can be treated as normal office waste.
Each time you remove the waste tray to empty waste ink, be sure
to empty the waste tray completely before replacing it in the
maintenance tray.
Caution
Do not load used ink into the printer. Reusing waste ink ruins
the printhead and invalidates the printer warranty.
6. Replace the waste tray in the maintenance tray.
a. Place the side opposite the handle into the maintenance tray
first.
b. Press down firmly in the center of the waste tray to lock it into
place. Make sure the waste tray is fully seated in the
maintenance tray.
4
5
6
b
a
9101-39
7. Replace the maintenance tray in the printer.
Note
To prevent media jams at the media tray, be sure to push the
maintenance tray into the printer until both sides latch in place.
8. Close the front cover.
5-6
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
Replacing the maintenance tray
Approximate time to complete: 1 minute
The printer uses the maintenance tray, located inside the printer behind the
front cover, prior to each printing and during cleaning operations. A front
panel message tells you when the maintenance tray is low, allowing you to
make a minimal number of prints before the tray is depleted. Install a new
maintenance tray to continue printing. Each replacement maintenance tray
has a print capacity of approximately 12,500 prints. To avoid printing
delays, keep an extra maintenance tray available for use in the printer.
Note
There is a 15-minute warm-up period required after replacing the
maintenance tray.
To order a maintenance tray (Tektronix order number 436-0294-03), contact
your local dealer or, in the United States, call Tektronix at 1-800-835-6100.
1. Open the front cover.
9101-22
Caution
Some surfaces inside the printer may be hot. Be careful not to
touch the areas marked with this caution icon:
User Manual
5-7
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
2. When you open the front cover, the following message appears:
Caution Hot Surfaces
Replace Maintenance Tray
3. Grasp the maintenance tray by the front edge and lift up while
sliding it out of the printer.
9101-53
Note
Once the maintenance tray has been partially used, it leaks drum
fluid if tipped. Never ship a partially used maintenance tray.
Contact with the drum fluid poses no known health risk. Refer to
“MSDS for silicone oil” on page 9-6 for more information.
4. Install a new maintenance tray in the printer.
Note
Be sure to push on both sides of the maintenance tray to latch it
firmly into the printer.
5. Close the front cover and wait for the printer to warm-up.
6. To prevent leaking, seal the used maintenance tray in the plastic
bag from the new (replacement) maintenance tray. Treat the used
maintenance tray as normal office waste.
5-8
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
Cleaning the printer
Periodically cleaning the printer keeps it in peak operating condition.
Automatic cleaning procedures to cure most problems are available through
the front panel by pressing the Cleanbutton. When necessary, the front
panel guides you through steps to perform cleaning procedures. When
appropriate, the printer offers to print instructions detailing the cleaning
procedure.
Cleaning pages
The printer occasionally prints a cleaning page as part of a self-maintenance
operation. This helps the printer maintain the highest quality printing
possible. You can clean the printer anytime you see light stripes on your
prints by running the Clean:Light Stripescleaning procedure from the
front panel; see page 5-14 for instructions. Discard the cleaning page as
normal office waste. To change the cleaning page source, see page 7-9.
1
Red
2
Green
3
Blue
4
Black
1 2 3 4
Phaser® 350 Cleaning Page
This page prints to maintain optimal print quality.
9682-07
User Manual
5-9
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
Cleaning supplies
When you receive your new printer, you receive these cleaning supplies:
1. Cleaning tray
2. Foam swabs
3. Lint-free wipes (dry)
4. Plastic bottle for dispensing isopropyl alcohol
1
2
3
4
9101-24
Some cleaning procedures require you to use cloth wipes or swabs saturated
with isopropyl alcohol. Since shipping regulations prohibit supplying
alcohol or presoaked cleaning materials with the printer, you must supply
90% pure isopropyl alcohol (available at pharmacies). You can obtain
pre-soaked alcohol wipes by ordering a separate cleaning kit from Tektronix
or by ordering them in packs of 10 (Tektronix order number 006-7824-01).
5-10
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
Reordering cleaning kit supplies
To reorder the cleaning kit (Tektronix order number 016-1341-00), contact
your dealer or local Tektronix office. In the United States, call:
1-800-835-6100, or order by fax: (503) 682-2980.
When you order the cleaning kit, you receive these items:
1. Cleaning tray
2. Foam swabs
3. Lint-free wipes (isopropyl alcohol-saturated)
4. Plastic bottle for dispensing isopropyl alcohol
1
2
3
4
9101-23
Note
You can order alcohol-saturated wipe packets separately in packs
of 10 (Tektronix order number 006-7824-01).
User Manual
5-11
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
Using isopropyl alcohol
In general, it is best to use the purest isopropyl alcohol (99%) available to
you. You can use 90% pure isopropyl alcohol, but if you do, you must wait
after cleaning to make sure that printer parts are completely dry. 99%
isopropyl alcohol dries quickly; 90% isopropyl alcohol may take several
minutes to dry.
Caution
Do not use rubbing alcohol because it can contain water and
oils that leave undesirable residue on the printer parts. Never
use water to clean the printer’s internal components. Failure
to follow these instructions may invalidate your printer’s
warranty.
Whenever the cleaning instructions refer to a lint-free cloth moistened with
isopropyl alcohol ( ), you can substitute a pre-soaked alcohol cloth ( ). When the
A
B
cleaning instructions direct you to use an alcohol-soaked swab, you can use
the extra alcohol in a pre-soaked alcohol cloth packet to moisten the
swab (C).
Warning Alcohol is flammable; keep alcohol-soaked cloths and swabs
away from hot surfaces.
The reorder cleaning kit (order number 016-1341-00) includes these
pre-soaked alcohol cloth packets.
A
B
C
9101-2
5-12
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
Identifying cleaning solutions
Cleaning procedures listed in this chapter are referenced by the type of
Light stripes or missing colors
Problem type
Solution
Missing or light-colored
stripes on prints.
Refer to “Cleaning for light stripes: printhead” on
page 5-14.
Ink smears or random streaks
Problem type
Solution
Ink smears on the front,
back or edges of a page.
Refer to “Cleaning for ink smears and transfix problems:
Oil (drum fluid) on top edge
of print.
Refer to “Cleaning for jams and ink smears: paper-feed
rollers” on page 5-19.
Refer to “Cleaning for ink smears: paper-exit path” on
page 5-25.
Media jams at the upper or lower tray
Problem type
Solution
Refer to “Cleaning for upper media tray jams: media-pick
Paper-pick or jamming
problems at the upper tray.
roller” on page 5-30.
Paper-pick or jamming
problems at the lower tray.
Media jams behind the front cover or manual-feed slot
Problem type
Solution
Media jams behind front
Refer to “Cleaning for jams and ink smears: paper-feed
cover or at manual-feed slot. rollers” on page 5-19.
Media sticking to transfix roller
Problem type
Solution
Media wrapping around
black transfix roller inside
the exit cover.
Refer to “Cleaning for ink smears and transfix problems:
internal paper path” on page 5-17.
User Manual
5-13
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
Cleaning for light stripes: printhead
Approximate time to complete: 3-10 minutes
If your prints have 1/ 10 in. (2.5 mm) lengthwise stripes that are the wrong
color or have missing colors, you can correct the problem by cleaning the
printhead. The printer automatically executes a printhead cleaning
sequence when you run the Clean:Light Stripesroutine from the
front panel.
9682-21
1. When the printer is on and the Readymessage or the printer’s
name appears, press the Cleanbutton. The printer displays the
first selection in the menu:
Clean:Light Stripes
<---- Clean Test
2. Press the Cleanbutton once again.
3. A series of front panel messages indicate the condition of the
printer as it progresses through a sequence of automatic cleaning
routines. The printer outputs a cleaning page at the end of the
cleaning sequence that you may discard as normal office waste.
4. When the cleaning sequence is completed, the printer displays the
following message:
Clean:Light Stripes
<---- Clean Test
5-14
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
5. To confirm that the problem has been corrected, press the Test
button to print a test page. Check for any missing color bars on
the test page. The following illustration shows a correct test print,
and an example of a test print with a missing color bar.
If your test print looks like the first example, go on to Step 8 to end
this procedure.
If your test print looks like the second example with a missing
color bar, go on to Step 6 to perform the cleaning procedure again.
1
Black
2
Cyan
3
Magenta
4
Yellow
1
2
3
4
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
6
6
6
6
7
7
7
8
8
8
6725 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88
8
9 10 11 12 13
1
1
1
9
9
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88
1
2
3
4
5
6
6725 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88
8
10 11 12 13
9682-22
User Manual
5-15
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
6. If one or more of the color bars are still missing, repeat the
cleaning sequence by pressing the Cleanbutton once again.
When cleaning ends, the printer outputs a cleaning page that you
may discard as normal office waste.
If the second cleaning sequence does not cure the light stripes or
missing colors problem, you can press the Cleanbutton for a
third time to repeat the cleaning sequence.
7. If your prints still have color stripe problems after the third
cleaning sequence, turn the printer off for at least 12 hours to
allow the ink to solidify. Turning the printer on again after is has
completely cooled down automatically purges ink.
8. If your prints still have color stripe problems, service may be
required.
Exit
9. Return the printer to normal operation by pressing the
button
until the Ready message appears.
5-16
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
Cleaning for ink smears and transfix problems: internal paper path
Approximate time to complete: 3-6 minutes
If your prints have stray ink marks on the front or the back, or the media is
wrapping around the black transfix roller inside the exit cover, you can
correct the problem by cleaning the printer’s internal paper path surfaces.
The printer automatically feeds 10 sheets of paper through the print path to
collect stray ink particles when you run the Clean:Ink Smearsroutine
from the front panel.
Sample ink smear: internal paper path
9101-63
Caution
Always use clean sheets of paper to clean the paper path. Do
not reuse cleaning sheets. High-grade, heavier papers, such as
32 lbs. (120 g/m2) Bond, works best.
Do not attempt duplex (two-sided) printing on any type of
media. Ink already present on the media offsets onto the
internal paper path, requiring you to perform cleaning
procedures.
User Manual
5-17
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
1. Load the upper media tray with sheets of clean, high-grade paper.
2. When the printer is on and the Readymessage or the printer’s
name appears in the front panel, press the Cleanbutton. The
printer displays the first selection in the menu:
Clean:Light Stripes
<---- Clean Test
3. Press the left arrow (<---)button until the following front panel
message appears:
Clean:Ink Smears
<---- Clean Test
4. Press the Cleanbutton. The printer displays the following front
panel message:
Warming Up
Cancel
5. After a short delay during the warm-up period, the printer begins
an automatic sequence of feeding 10 clean sheets of paper from the
upper media tray.
A front panel message indicates the number of sheets remaining to
be fed. For example:
Cleaning:Using 10 Sheets
6. When the cleaning sequence is complete, inspect the last sheet of
paper fed through the printer. If it is not clean, repeat the cleaning
sequence by pressing the Cleanbutton once again.
Exit
7. Return the printer to normal operation by pressing the
button.
If the ink smear problem persists after running clean sheets of
paper through the paper path, refer to the following two
procedures for directions on cleaning paper feed rollers and the
paper exit path.
5-18
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
Cleaning for jams and ink smears: paper-feed rollers
Approximate time to complete: 5 minutes
You should clean the upper and lower media feed rollers if any of the
following conditions exist:
■
Media is consistently jamming behind the front cover or at the
manual-feed slot.
■
Ink smear problems persist after you have performed the
“Cleaning for ink smears: internal paper path” procedure.
The media-feed rollers carry the print media from the media tray and
manual-feed slot through the printer. Occasionally, stray ink particles
become attached to the paper-feed rollers creating slick roller surfaces.
When media feed problems or ink smears appear on prints, you can
generally correct the problem by cleaning the media-feed rollers. Refer to
“Using isopropyl alcohol” on page 5-12 for more information.
Sample ink smear: paper-feed rollers
9101-61
User Manual
5-19
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
1. Open the front cover.
9682-23
Caution
Hot surfaces exist behind the upper paper-feed rollers. To
avoid personal injury during cleaning procedures, do not
reach in behind the paper-feed rollers.
2. Grasp the maintenance tray by the front edge and lift up while
sliding it out of the printer. Keep the maintenance tray upright.
9101-53
Note
Once the maintenance tray has been partially used, it leaks drum
fluid if tipped. Contact with the drum fluid poses no known
health risk; refer to page 9-6 for more information.
5-20
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
3. There are two sets of upper paper-feed rollers located above the
maintenance tray. One set of rollers is rubber; the other set is
white plastic. The rubber rollers are mechanically linked to
companion rubber rollers located under the maintenance tray.
Turning the lower rubber rollers also turns the upper rollers.
To clean the upper rubber rollers, use either the pre-packaged
alcohol-soaked cloth or fold a lint-free cloth into a two-inch square
and soak with alcohol.
Place the cleaning cloth against the underside of each upper
rubber roller, lifting to create pressure against the roller. Press the
middle finger of your other hand flat against a lower roller and
turn the roller using the entire length of your finger. The upper
rubber roller should rotate four or five complete revolutions to ensure
proper cleaning.
Scrub each roller thoroughly. If the cloth becomes dirty, discard it
and use another.
3
9682-12
User Manual
5-21
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
4. If the upper white plastic rollers are dirty, clean the rollers with an
alcohol-soaked swab. Place the swab on top of each upper white
roller and lift on the swab to create pressure against the roller.
Rotate the upper white roller four or five complete revolutions by
sliding the index finger of your other hand along the lower rollers.
Scrub each roller thoroughly until clean. If the swab becomes
dirty, discard it and use another.
4
9682-20
5-22
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
5. There are two sets of lower paper-feed rollers. One set of rollers is
rubber; the other set is white plastic. The rubber lower rollers are
located below the maintenance tray; the white plastic rollers are
located on the inside of the front cover.
To clean the lower rubber-feed rollers, use either the pre-packaged
alcohol-soaked cloth or fold a lint-free cloth into a two-inch square
and soak with alcohol.
Place and hold the cleaning cloth on top of each lower rubber
roller, pressing to create pressure against the roller.
Press the middle finger of your other hand flat against a lower
roller and turn the roller using the entire length of your finger.
The lower rubber roller should rotate four or five complete
revolutions to ensure proper cleaning.
Scrub each roller thoroughly. If the cloth becomes dirty, discard it
and use another.
9682-13
User Manual
5-23
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
6. If the lower white plastic rollers are dirty, clean them using either
the pre-packaged alcohol-soaked cloth or fold a lint-free cloth into
a two-inch square and soak with alcohol.
Place and hold the cleaning cloth on top of each lower white roller
while turning the individual roller with your thumb and
forefinger.
Scrub each roller thoroughly until clean. If the cloth becomes
dirty, discard it and use another.
9682-19
7. Put the maintenance tray back in the printer, pushing on both
sides of the maintenance tray to latch it firmly in place.
8. Close the front cover. If the problem persists, refer to “Cleaning
for ink smears: paper-exit path” on page 5-25.
5-24
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
Approximate time to complete: 10 minutes
If you have already performed the other “Cleaning for ink smears”
procedures described earlier in this chapter but problems persist, you should
manually clean the paper-exit path. Refer also to “Cleaning for jams and ink
smears: paper-feed rollers” on page 5-19.
Occasionally, stray ink particles become attached to the exit fingers, rollers
and guides under the exit cover causing ink streaks or marks on the top
edge, front or back of prints. When this occurs, you must clean these parts
using both dry and alcohol-soaked swabs. Refer to “Using isopropyl
alcohol” on page 5-12 for more information.
Sample ink smear: paper-exit path
9101-62
User Manual
5-25
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
1. Open the front cover.
9682-23
2. Open the exit cover using the blue release button located inside
the front cover at the top of the printer.
9682-24
5-26
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
3. To clean excess ink particles and drum fluid from the colored exit
fingers, gently wipe the top surface of each finger using a dry
swab.
Caution
To avoid damaging the print drum and exit fingers, never
scrape excess ink with a tool or fingernail. Use a dry swab
provided with the cleaning kit.
3
9682-14
User Manual
5-27
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
4. To clean the rubber exit rollers, wrap an alcohol-soaked cloth
around the index finger of one hand. Press your cloth-covered
finger against each roller and turn the roller several times to clean
each roller individually.
9682-15
Note
You may notice some staining of the exit rollers while performing
the cleaning procedure. This is normal and does not indicate
additional cleaning is necessary. Simply clean rollers to remove
any build-up of ink.
5. To clean the white plastic exit rollers, wrap an alcohol-soaked
cloth around the index finger of one hand. Place and hold your
cloth covered finger on top of each roller while turning the
individual roller with the thumb and forefinger of your
other hand.
5-28
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
6. To clean the two sets of ribbed exit guides on the underside of the
exit cover, gently wipe the raised ribs using an alcohol-soaked
cloth.
6
9682-16
Caution
To avoid damaging the print drum and exit guide, never scrape
excess ink with a tool or fingernail. Use only the materials
provided with the cleaning kit.
7. Close the exit cover and the front cover.
8. If the ribbed guides on top of the printer (the output tray) require
cleaning, use an alcohol-soaked wipe.
User Manual
5-29
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
Cleaning for upper media tray jams: media-pick roller
Approximate time to complete: 5 minutes
If you are experiencing media-feeding problems, including mispicks and
multiple picks of media from the standard (upper) media tray, you can
generally correct the problem by cleaning the media-pick roller with
isopropyl alcohol. Refer to “Using isopropyl alcohol” on page 5-12 for more
information.
The printer’s front panel messages guide you through the necessary steps to
perform automatic cleaning procedures. You will need the pick roller
cleaning tray included in the cleaning kit when you run the Clean: Media
Tray Jamsroutine from the printer’s front panel. You can also clean the
media-pick roller using an alcohol-soaked cloth; refer to “Manually cleaning
the upper pick roller” on page 5-34.
Note
Media-picking problems can also occur when the maintenance
tray is not properly latched. You may need to remove and re-latch
the maintenance tray to cure a media picking problem. Refer to
“Replacing the maintenance tray” on page 5-7 for instructions.
Automatically cleaning the upper pick roller
1. When the printer is on and the Readymessage or the printer’s
name appears in the front panel, press the Cleanbutton. The
printer displays the first selection in the menu:
Clean:Light Stripes
<---- Clean Test
2. Press the left arrow(<---)button until the following front panel
message appears:
Clean:Media Tray Jams
<---- Clean Test
3. Press the Cleanbutton once again.
5-30
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
4. When the following front panel message appears, press Printif
you want a printout of the procedure, otherwise, press Continue:
Print Instructions?
Continue Print
5. When you press Continue, a front panel message prompts you to
install the cleaning tray in the media tray.
a. Remove the upper media tray from the printer. Remove all
print media from the media tray.
b. Remove the cleaning tray from the cleaning kit and open the
tray lid to reveal the cleaning tray sponge.
c. Wet the cleaning tray sponge with isopropyl alcohol (
A); a
bottle is provided in the cleaning kit for dispensing the
alcohol. Alternately, you can squeeze the alcohol from two
pre-soaked alcohol wipe packets to moisten the cleaning tray
sponge (B).
Caution
Do not use rubbing alcohol because it can contain water and
oils that leave undesirable residue on the printer parts. Never
use water to clean the printer’s internal components. Failure
to follow these instructions may invalidate your printer’s
warranty.
A
B
9101-27
User Manual
5-31
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
d. Place the cleaning tray in the media tray so that the tray’s
sponge pad is nearest the paper tray’s handle. Press the two
tabs underneath the cleaning tray into the two square notches
provided in the media tray.
9101-26
e. Insert the media tray with the cleaning tray into the printer.
6. Press the Cleanbutton. The printer cleans the media-pick roller
while displaying the following message:
Cleaning
5-32
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
7. When the cleaning operation is complete, the following front
panel message appears:
Remove Cleaning Tray
8. Remove the media tray from the printer.
9. Remove the cleaning tray from the media tray.
10. Examine the separator pad located inside the media tray near the
paper tray’s handle. If it is coated with dust, wipe the separator
pad using a clean cloth or a dry brush.
10
9101-71
User Manual
5-33
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
11. Reload media in the media tray. Replace the media tray in the
printer.
12. The front panel re-displays the following message:
Clean:Media Tray Jams
<---- Clean Test
9101-00
Exit
13. Press the
button to return to normal operation. Store the
cleaning tray in its original packaging for later use.
14. If media-feed problems persist, you may need to manually clean
the media-pick roller by hand with an alcohol-soaked cloth.
Manually cleaning the upper pick roller
1. Remove the upper media tray from the printer.
2. Open the front cover.
9682-23
Caution
Hot surfaces exist behind the upper paper-feed rollers. To
avoid personal injury during cleaning procedures, do not
reach in behind the paper-feed rollers.
5-34
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
3. Grasp the maintenance tray by the front edge and lift up while
sliding it out of the printer. Place the maintenance tray on a level
surface.
9101-53
Note
Once the maintenance tray has been partially used, it leaks drum
fluid if tipped. Contact with the drum fluid poses no known
health risk; refer to page 9-6 for more information.
4. Locate the top of the media-pick roller behind the black rubber
transport rollers. To clean the top surface of the media-pick roller,
use either the pre-packaged alcohol-soaked cloth or a lint-free
cloth folded into a two-inch square and soaked with alcohol.
User Manual
5-35
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
5. Scrub the top surface of the media-pick roller thoroughly. If the
cloth becomes dirty, discard it and use another.
9682-25
6. Replace the maintenance tray in the printer.
Note
To prevent media jams at the media tray, be sure to push the
maintenance tray into the printer until both sides latch in place.
7. Close the front cover.
5-36
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
8. Locate the bottom of the media-pick roller according to the
following illustration.
9682-17
9. Using an alcohol-soaked cloth, scrub the bottom surface of the
pick roller thoroughly.
9682-26
10. Replace the upper media tray in the printer.
User Manual
5-37
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
Cleaning for lower tray jams: paper-pick rollers
Approximate time to complete: 1 minutes
If you are experiencing media-feeding problems, including mispicks and
multiple picks of paper from the Lower Paper Tray Assembly, you can
generally correct the problem by cleaning the media-pick rollers with
isopropyl alcohol. Refer to “Using isopropyl alcohol” on page 5-12 for more
information.
1. Remove the lower paper tray from the Lower Paper Tray
Assembly.
2. Locate the media-pick rollers according to the following
illustration.
9682-18
3. Using an alcohol-soaked cloth, scrub both pick rollers
thoroughly.
4. Replace the lower paper tray in the Lower Paper Tray Assembly.
5-38
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
MovingYour Printer
Waiting 30 minutes before moving
Before you move the printer, you’ll want to wait for the printer to display the
Readymessage or the printer’s network name, then turn off the printer
Caution
To avoid damaging the printer, let the printer cool down for at
least 30 minutes before you move it so that the ink has time to
solidify. Failure to wait 30 minutes will likely result in an ink
spill that will damage the printer’s internal components.
Removing the maintenance tray
1. Remove the maintenance tray from the printer, keeping it level.
Remove, empty, and replace the waste tray. Refer to “Emptying
the waste tray” on page 5-4 for detailed instructions.
2. Place the maintenance tray in a plastic bag and seal the bag.
The maintenance tray contains drum fluid that leaks if the tray is
tipped. Keep the maintenance tray level and in a sealed plastic
bag while transporting it.
Caution
To avoid damaging your printer and invalidating your
printer’s warranty, remove the maintenance tray before
moving the printer. Always store a used maintenance tray in a
leak-proof package. When handling the maintenance tray, keep
it level. Never ship a partially used maintenance tray. Contact
with the drum fluid poses no known health risk. Refer to
“MSDS for silicone oil” on page 9-6 for more information.
User Manual
5-39
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
Locking the transit restraint
Refer to the following illustration while performing these steps.
1. When the printer displays the Readymessage or the printer’s
name, power it down using the rear-panel On/Off switch. The
printer places the print head in the locking position.
Caution
To avoid damaging the printer’s internal components, always
turn the printer power off and lock the transit restraint before
moving the printer. Failure to do so may result in damage to
the printers’ internal components and may invalidate your
printer’s warranty.
2. Locate the transit restraint on the right side of the printer and
insert a wide flat-blade screwdriver into the transit restraint slot.
3
2
9101-51
3. While pressing inward with medium pressure, turn the transit
restraint slot in a clockwise direction to lock the printhead in
position. The lock button is recessed from the side of the printer
when fully engaged.
5-40
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Printer
5
Changing line voltage
If you move the printer to a country that uses a line voltage different from
the printer’s factory setting, you can change the line voltage to the
appropriate setting by using the line voltage selector switch. The line
voltage selector switch is located next to the On/Off switch.
Warning To avoid damaging the printer, turn the printer power off using
the On/Off switch and unplug the power cord before changing
the line voltage selector switch. To avoid risk of electric shock,
do not remove any of the printer’s covers.
The new location may require a different power cord; contact your local
Tektronix office or dealer for details.
1. Line voltage selector switch.
Ethernet®
PHASER 350 MODEL 4682 PXi
AUX
Feeder
115
DIP
SCSI Disk
Service
port
Parallel
Smart Card
115
9682-11
User Manual
5-41
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caring for Your Printer
5-42
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
6
Troubleshooting
If you need help
If you need assistance, contact your local Tektronix dealer or sales
representative or any of these listed resources:
Type of service
How to access
Details
Customer Support Hotline
1-800-835-6100
US & Canada
Monday through Friday
6:00 am to 5:00 pm PST
Printer service
1-800-835-6100
US & Canada
Monday through Friday
6:00 am to 5:00 pm PST
Outside US & Canada:
contact local Tektronix dealer or office
The Tektronix Bulletin Board Service (BBS)
24 hours/day, 7 days/week
Online services
Technical support:
World Wide Web
Anonymous ftp server
support@ColorPrinters.tek.com
http://www.tek.com/Color_Printers/
ftp.tek.com/Color_Printers
HAL automated fax system
(503) 682-7450
direct outside US, Canada
24 hours/day, 7 days/week
24 hours/day, 7 days/week
24 hours/day, 7 days/week
1-800-835-6100
toll-free for US, Canada
EuroHAL
Refer to “Using the automated fax
systems” on page 6-2.
User Manual
6-1
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Using the automated fax systems
As an alternative to other resources, and to provide up-to-date information
quickly, Tektronix has set up HAL (Highly Automated Library) and
EuroHAL, two interactive, automated fax systems. These automated fax
systems provide Macintosh, PC, and workstation users with the latest
technical hints and tips (like color adjustments), solutions to common
technical problems, and application notes for software problems.
If you have a fax machine and a touch-tone voice telephone, you can order a
HAL catalog, listing all of the information offered by HAL. You may call
HAL or EuroHAL from anywhere in the world. The fax systems are
available 24 hours a day, seven days a week.
Use EuroHAL to order a catalog or individual documents in Europe
EuroHAL includes many documents, some in English and some in other
European languages. If a local version of the document you want is
available, EuroHAL will send it in your language. Otherwise, it will send
English documents.
Country
Austria
Numbers
Belgium
Denmark
Finland
Italy
00 44 1908 681 839
Switzerland
France
0800 90 81 86
Germany
Holland
Norway
Spain
0130 819 220
09 44 1908 681 839
095 44 1908 681 839
07 44 1908 681 839
009 44 1908 681 839
01908 681 839
Sweden
UK
Other countries
+44 1908 681 839 (where + is your
country’s International Access Code)
6-2
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Front panel messages
The front panel displays messages indicating the condition of the printer.
Some messages, such as Standbyand Warming Up, simply provide status
information. These messages do not require user action. Error messages,
such as Jam:Open Front Cover, require you to perform some action such
as remove a paper jam. Use the following table to determine the appropriate
action for each type of front panel message.
The printer may display a numeric error code when it detects certain types
of problems. If you see a numeric error code, first write down the number.
Try turning off the printer’s power and wait at least 15 seconds before
turning the power on again. If that does not solve the problem, call your
local Tektronix office for assistance or call Tektronix Service in the U.S. and
Canada at 1-800-835-6100.
Front panel messages
Message
Action
No user action required. The printer is ready to print.
<printer network
name>
No user action required.
Busy < message >
Check Print
The printer is waiting for confirmation of the print job
from the front panel.
No user action required. The printer is running an
automatic cleaning operation.
Cleaning
No user action required. May be displayed after you
press the Cancelbutton.
Clearing Job
Close the front cover.
Close the top cover.
Close the exit cover.
Close Front Cover
Close Top Cover
Close Exit Cover
Energy Star Mode
Press Wakeup or send a print job to bring the printer
to Ready.
Turn the printer off, wait at least 15 seconds and turn
the printer’s power on again. If the failure persists, note
the code number in the display. In the U.S., call
Tektronix service at 1-800-835-6100. Outside the U.S.,
contact your local Tektronix office.
Fault. Service
Required
User Manual
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Front panel messages (cont'd.)
Message
Action
An incorrect paper size is loaded in the tray or paper
narrower than A4-size is in the manual feed slot. Use
Letter- or A4-size media.
Incorrect Media
Size
The Ink Lowmessage appears when ink level drops to
one-half stick. Open the top cover and add the
appropriate color of ColorStix solid ink stick.
Ink Low/Out of Ink
No user action required. Wait for a period of time.
Initializing
Open the front cover and remove the paper jam from
the manual feed slot or behind the front cover. You may
need to push on both sides of the maintenance tray to
relatch it or clean the upper or lower paper feed rollers.
Jam:Open Front
Cover
Remove the media from the manual feed slot and
re-insert it.
Jam:Retry Manual
Feed
Open the exit cover and remove the paper jam. You
may need to clean the paper exit path.
Jam:Open Exit
Cover
There is a paper jam at the standard media tray.
Remove the tray and the jammed paper. You may need
to run the Clean:Paper Jamsroutine.
Jam:Remove Upper
Tray
There is a paper jam at the lower paper tray. Remove
the tray and the jammed paper.
Jam:Remove Lower
Tray
No user action required. Displayed after you press the
Cancelbutton.
Job Cancelled
Add paper to the lower media tray.
Lower Media Tray
Empty
The printer has locked the maintenance tray because
hot ink is present. Wait for a few minutes before trying
to remove the maintenance tray.
Maintenance Tray
Locked
The Maintenance Tray Lowmessage appears when
the tray is nearly empty. Open the front cover, remove
the maintenance tray, and replace it with a new one.
Maintenance Tray
Low
Insert a maintenance tray into the printer.
Maintenance Tray
Missing
The printer requires a sheet of paper for cleaning but
the media tray contains transparency. Feed a sheet of
paper into the manual feed slot.
Manual Feed Paper
6-4
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Front panel messages (cont'd.)
Message
Action
Add paper or transparencies to the media tray.
Media Tray Empty
Melting Ink
No user action required. Displayed during print jobs
that require large amounts of ink.
No user action required.
Processing Data
Ready
No user action required. The printer is ready to print.
Insert the lower media tray.
Replace Lower
Media Tray
Open the front cover, remove the maintenance tray,
and replace it with a new one.
Replace
Maintenance Tray
Insert the standard media tray.
Insert the standard media tray.
Replace Media Tray
Replace Upper
Media Tray
Press Wakeup or send a print job to bring the printer
to Ready.
Standby
No user action required. Wait for a period of time.
Tektronix V:<n.n>
Unlock the transit restraint on the right side of the
printer before sending print jobs.
Unlock Transit
Restraint
Add paper or transparencies to the standard media
tray.
Upper Media Tray
Empty
Insert paper or transparency in the manual feed slot.
Waiting For Manual
Feed
The print job specifies paper but the printer detects that
the transparency tray is installed. Load paper in the
media tray and press OK .
Waiting For Paper
The print job specifies transparency but the printer
detects that the paper tray is installed. Load
transparency in the media tray and press OK .
Waiting For
Transparency
No user action required. Wait for a period of time.
Warming Up
Open the front cover, remove the maintenance tray and
empty the waste tray.
Waste Tray Full
User Manual
6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Problems and solutions
Refer to the following tables if you encounter problems with the printer.
Media feeding or jamming problems
Symptom
Solution
Use standard office paper 16 to 32 lb. (60 to 120 g/m ) or
2
Media feed or mispick
problems at the standard Tektronix transparency media. Do not load the tray
tray.
beyond the fill line. Paper tray capacity is 200 sheets
paper or 50 sheets transparency. Transparency tray
capacity is 175 sheets transparency.
Refer to “Cleaning for upper media tray jams: media-pick
roller” on page 5-30.
2
Paper feed problems at
the lower paper tray.
Use standard office paper 16 to 32 lb. (60 to 120 g/m ).
Do not load the tray beyond the fill line. Paper tray
capacity is 500 sheets.
Paper jamming inside
the printer.
Remove and re-latch the maintenance tray. Refer to
“Replacing the maintenance tray” on page 5-7.
Refer to “Cleaning for jams and ink smears: paper-feed
rollers” on page 5-19.
Paper jamming at
manual feed slot.
Wait for the front panel prompt before feeding paper.
Align paper against the left edge of the manual feed slot.
Make sure that the proper page size is selected for the
slot.
Image quality problems
Symptom
Solution
Missing or light color
stripes on prints.
Refer to “Cleaning for light stripes: printhead” on
page 5-14.
Ink streaks or oil on front, Do not print on both sides of the media. Ink may be
back or edges of print.
offset onto the internal paper path.
Refer to “Identifying cleaning solutions” on page 5-13.
Transparency print
quality poor.
Use Tektronix premium transparency media. Use the
transparency tray for printing transparencies and specify
Transparency in a supported printer driver. Refer to
“Transparency quality tips” on page 3-37.
6-6
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Image quality problems (cont'd.)
Symptom
600 x 300 dpi prints look 600 x 300 dpi mode is not included in the Phaser 350
like 300 dpi quality.
Print is wrinkled.
printer’s standard configuration. Refer to “Print quality
modes” on page 3-27.
You may be using paper that is too thick or thin. Refer to
“All about media” on page 3-29.
Paper edge is rippled.
You may be using the wrong grain paper. Load
long-grained paper. Refer to “All about media” on
page 3-29.
Printed image is shifted, ■ You may have to make adjustments in the application
the wrong color, or
margins are not correct.
or print driver. Refer to “Printing and installation
problems” on page 6-9.
■ Make sure that the paper is not curled. Also refer to
“Cleaning for jams and ink smears: paper-feed rollers”
on page 5-19.
■ Macintosh users need to leave Background Printing
in the Chooser set to Off.
■ PC users need to turn off background printing
through the Print Manager.
Colors do not print as
expected.
■ Refer to “TekColor corrections — making the best
selection” on page 4-3 for details on how to select
TekColor color corrections. You may have attempted to
print transparency loaded in a paper tray but did not
specify transparency as the print media in the printer
driver. Refer to “Transparency quality tips” on
page 3-37 for more information.
■ Refer to “Printed colors are not what you expected” on
page 6-32 for more tips.
■ Refer to “Printing and using the color sampler charts”
on page 4-10.
User Manual
6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Image quality problems (cont'd.)
Symptom
Solution
Image prints in
black-and-white instead
of color.
■ PC users: Be sure to use a driver that supports color
PostScript. If you are running Windows, use the
Tektronix-supplied driver that was shipped with the
printer’s software. Refer to “Printing from a
workstation” on page 3-20 for information on drivers.
■ Microsoft Excel users: Be sure to check the Print
using color option in the print dialog box.
■ Macintosh users: Use a supported color PostScript
printer driver and the Phaser 350 printer’s PPD file.
Select Color/Grayscale in the Print Options dialog
box. Refer to “Printing from a Macintosh” on page 3-14
for more details on how to print from a Macintosh.
■ You may need to install application-related files such as
a PDF file for QuarkXPress.
PC Users: Refer to “PC/Windows software” on
page 2-31 for information.
Macintosh Users: Refer to “Macintosh software” on
page 2-52 for information.
■ You may have incorrectly sent the Monochrome color
correction utility file to the printer.
Network problems
Symptom
Solution
The printer doesn’t
appear in the Chooser
on a Macintosh.
■ Always make network connections before turning on
the printer. Turn the printer off, wait at least 15 seconds
and turn the printer’s power on again.
■ Check the termination; refer to the documentation for
your network adapter or connector for information on
termination.
■ Check the configuration page to get the zone name
and printer name. Refer to “Printer Help Pages” on
page 7-6. Make sure that the correct zone and printer
name have been selected in the Chooser.
■ If you have changed the printer’s name, did you make
it a unique name (not the same as any other printer in
the zone)?
■ Make sure that the correct network is selected in the
Network Control Panel.
6-8
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Printing and installation problems
Symptom
Solution
You have problems
printing from a specific
application.
■ You can get tips on printing from specific applications
(such as QuarkXPress and PageMaker) from the
Tektronix World Wide Web site:
http://www.tek.com/Color_Printers/userdoc
/introduction.html
■ Information on printing from specific applications is
also available by contacting HAL, the Tektronix
automated information system. Refer to “Using the
automated fax systems” on page 6-2
Text prints in Courier
font.
The font you have specified is not available. The
standard Phaser 350 printer supports 17 resident fonts.
An additional 52 fonts are optionally available, for a total
of 69 fonts. Other fonts must be downloaded or available
on a SCSI font disk. Refer to “Fonts” on page 3-41 and
to “Installing the printer’s software” on page 2-30.
The image does not
finish printing (the printer
times out).
■ PC users: If you are using the serial or parallel port,
use the MODE command to set the PC’s
communication parameters. For example:
MODE LPT1:,,P (for parallel port LPT1)
MODE COM1:9600,N,8,1,P (for serial port COM1)
■ Windows users: Double-click on the Control Panel.
Double-click the Printers icon. Choose your Tektronix
printer. Click the Connect button. Change the
Transmission Retry to 850.
■ Parallel port printing: If you get a timeout from the
Connect dialog box, change the Ports selection from
LPTX to LPTX.DOS. (Some Windows installations
may say LPTX.OS2; X is either 1, 2 or 3.)
The area of paper that
the printer prints on is
smaller than the media
size.
See “Margins and image area” on page 3-31 for more
details. To maximize the image area, you may have to
adjust the margins in your application software.
User Manual
6-9
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Printing and installation problems (cont'd.)
Symptom
Solution
A Macintosh printed
image has shifted or the
margins are not correct.
■ You should install a supported printer driver and the
Phaser 350 printer PPD onto your Macintosh to select
the correct page sizes from the driver. Refer to “Using
■ Turn off Background Printing through the Chooser.
■ Refer to the topic “Printing from a Macintosh” on
page 3-14 for details on how to print from a Macintosh.
The Readymessage or
the printer’s name is
displayed but the file
does not print.
■ Make sure that Phaser 350 printer is the selected
printer. Try printing the same file to another PostScript
printer. If the file prints, then the problem could be with
the interface cable. Refer to “Interface cables and
adapters” on page 8-3 for information on ordering
■ Turn the printer’s power off and wait at least
15 seconds before turning the power on again.
■ Refer to “Using a PostScript error handler” on
page 6-27 for details on using the Tektronix Error
Handler to determine the cause of the problem.
A Macintosh file does not ■ You may need to expand printer memory. Refer to
print and a virtual
memory (VM) error
appears.
“Memory upgrade” on page 8-7 for more information.
The file does not print or Make sure that you have the printer set up to receive the
it prints unexpected data. appropriate language (PostScript, HP-GL, or PCL5) for
that file. Refer to “Check the printer’s language mode” on
page 6-25 for more information.
Files sent during
power-up do not print.
Before printing a file, wait until the printer’s front panel
displays Readyor the printer’s name.
The printer receives a file Do not set the wait timeout to 0. Also, print files should
on the serial or parallel
port but does not print.
not have extra characters after the End-of-Job character
(Ctrl-D). Refer to the on-line manual on the printer’s
CD-ROM for information on setting timeouts and the
Ctrl-D character.
6-10
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Printing and installation problems (cont'd.)
Symptom
Solution
The printer receives a file Do not set the wait timeout to 0. Also, print files should
on the serial or parallel
port. The front panel
displays Waiting For
Dataindefinitely.
not have extra characters after the End-of-Job character
(Ctrl-D). Refer to the on-line manual on the printer’s
CD-ROM for information on setting timeouts and the
Ctrl-D character.
Another file sent to a
different port causes
your computer or
network interface to
lock up.
The printer receives a file To recover, press the Wakeup or Cancelbutton or
on the serial or parallel
port and the job prints
successfully. After
printing, the printer
displays Waiting For
turn the printer’s power off, wait at least 15 seconds, and
turn the power on again. (If you reset the printer, you
must send the print job again.) To prevent this condition,
do not set the wait timeout to 0. Also, print files should
not have extra characters after the End-of-File character
Data, goes into Standby (Ctrl-D). Refer to the on-line manual on the printer’s
mode, but doesn’t come CD-ROM for information on setting timeouts and the
out of Standby mode for Ctrl-D character.
the next print job.
The startup page prints
If the printer detects a non-fatal error at power-up, the
although you disabled it. startup page prints, even if you have disabled it. A red
box on the startup page identifies the type of error. The
printer’s power-up self-test can detect problems that do
not necessarily make the printer completely inoperable.
Examples of these non-fatal errors include faulty printer
ports and some memory failures. The printer may
require service.
You requested printing at The standard configuration of the Phaser 350 supports
600 x 300 dpi but the
page was output at
300 dpi print quality.
300 dpi resolution printing. 600 x 300 dpi printing for
paper is optionally available. Refer to “Print quality
modes” on page 3-27. Refer to “Printer Help Pages” on
page 7-6 to find out about printing the configuration
page.
User Manual
6-11
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Operational hints
Hint/Symptom
Solution
Leave the printer on.
When you turn off the printer, wait 15 seconds and then
turn it on again, it performs a cleaning routine which
consumes ink. To ensure optimum printing performance
and best economy, leave the printer turned on overnight
and during weekends.
When the printer sits idle, it automatically switches to a
standby level that keep it ready to use, but reduces
energy consumption. Pressing a front panel button,
opening a cover or sending a print job “wakes” the
printer.
Do not print on both
sides of the media.
Do not print on both sides of the paper or transparency
media. Printing on both sides causes ink to be offset
onto the printer’s internal paper path and will require
cleaning.
Paper jams occur when
you are using the paper
tray.
■ Do not fill the paper tray above the fill indicator line.
■ Is the paper too thick or thin for the printer? Refer to
“All about media” on page 3-29 for more details on the
type of paper you can use with the printer.
■ Check that the maintenance tray is fully latched.
■ You may need to clean the paper-pick rollers. Refer to
“Cleaning for upper media tray jams: media-pick roller”
on page 5-30 for details on cleaning these rollers.
The paper jams while
you are using manual
feed.
■ Wait until the front panel prompts you before inserting
media into the manual feed slot. Feed the paper or
transparency into the manual feed slot and let the
printer take the media out of your hands.
■ Select Manual Feed in the printer driver.
■ Select the appropriate size media in the printer driver.
■ Make sure to align the paper against the left edge of
the manual feed slot.
■ Is the paper too thick for manual feed? Refer to “Media
size and weight” on page 3-30.
■ Is the paper the appropriate size for the manual feed
slot?
Ink Lowmessage
appears when ink bins
are full.
Apply pressure to each row of ink sticks in the loading bin
to make sure they are not jammed.
6-12
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Operational hints (cont'd.)
Hint/Symptom
Solution
See “Printer standby modes” on page 7-8.
Delayed printout.
Printer outputs two prints Printer is clearing print drum and reprinting image. Refer
after a jam is cleared. to “All about media jams” on page 6-14.
Turn off the startup page. Refer to “Startup Page” on page 7-6.
Maintenance tray is
locked inside printer.
The printer locks the maintenance tray until it has cooled
down. Wait for a few minutes and try removing it again.
User Manual
6-13
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
All about media jams
Use the following guidelines to help prevent paper and transparencies from
jamming inside the printer.
■
■
■
When installing a new maintenance tray, push on both sides of the
tray to latch it firmly into the printer.
Periodically clean the printer to keep it operating in peak
condition. Refer to cleaning details in Chapter 5.
Fan the paper before loading it into the upper and lower paper
trays. For additional information on loading media trays, refer to
“All about media” on page 3-29.
■
■
Use standard grade paper 60–120 g/ m2 (16–32 lb.); use the manual
feed slot for thick papers. Do not use three-holed paper,
perforated paper, legal-size paper or envelopes.
Wait until a front panel message prompts you before feeding a
second sheet of paper or transparency into the manual feed slot.
■
■
Keep paper and other supplies clean and free from dust.
Paper that has been sitting out of its sealed wrapper can become
distorted, causing paper jams. Keep paper sealed until you are
ready to use it for printing.
■
Do not use paper that has been creased or wrinkled.
Caution
Never attempt two-sided or two-pass printing on any type of media.
Ink already present on the media will offset onto the internal paper
path, requiring you to perform cleaning procedures. Excessive
buildup of ink in the paper path may cause paper jams.
After you clear the jammed media, the printer feeds a cleaning page to
remove a partial image that may be on the printdrum. Once the printdrum
is cleared, the printer outputs the original image on a second page. The
source of the cleaning page (upper tray is default) is selected through the
Printer Defaultsmenu, Cleaning Page Sourcefront panel menu
selection. If you have letterhead or transparencies in the upper tray, you can
change the source of the cleaning page to avoid using letterhead for the
cleaning page; refer to “Selecting the cleaning page source” on page 7-9.
6-14
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Locating jammed media
Paper jams can occur in these places:
1. Inside the exit cover
2. Inside the front cover
3. At the manual feed slot
4. At the standard media tray and Lower Paper Tray Assembly
1
2
3
LETTER
A4
4
4
9101-30
Caution
Some surfaces inside the printer may be hot. Be
careful not to touch the areas marked with this
caution icon:
User Manual
6-15
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Removing jammed media
To avoid ink smears inside the printer, always try to pull jammed paper or
transparency media out through the top of the printer (the exit cover). If the
jammed media cannot be cleared from the exit cover, open the front cover
and check for jammed media. If the jam is not inside the front cover, remove
the media tray and check for jammed media.
Follow these guidelines when you remove jammed media:
■
Use both hands to gently pull the media through its normal path
out the top of the printer (exit cover), if possible.
■
■
Do not use excessive force pulling the media; it may tear.
After removing the jammed media, inspect it for tears. Leave no
media scraps in the printer.
■
If your prints have ink smears after clearing a jam condition, refer
to “Cleaning for ink smears: paper-exit path” on page 5-25.
1. Check for jammed media that has partially exited the printer’s exit
cover. Remove any jammed media by pulling the media out
through the top of the printer.
2. Open the front cover and check for jammed media.
9101-22
6-16
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
3. If necessary, open the exit cover using the blue release button
located inside the front cover, at the top of the printer.
9682-24
4. Using both hands, pull the jammed media out the top of the
printer.
9101-60
5. If necessary, remove the media tray to locate and clear jammed
media.
User Manual
6-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Improving print speed
Note
There are different ways to improve print speed, such as by
upgrading to Ethernet. For more information, request a
document catalog from HAL or EuroHAL, the Tektronix
automated fax systems. Refer to “Using the automated fax
systems” on page 6-2 for instructions.
If you tried to print a document with scanned images, but are dissatisfied
with the speed of the output, here are some suggestions.
All users
■
When you use any color correction option (other than None), your
printer can take longer to process bitmapped images. Select color
corrections from the supported drivers, with downloadable utility
files, or from the printer’s front panel; see “Color correction
descriptions” on page 4-6 for more information.
■
The Fast Color print quality mode is the fastest print-quality
mode, followed by the Standard print-quality mode and the
Enhanced (600 x 300) mode (available with the printer’s Extended
Features option). Select print quality modes from the supported
drivers, with downloadable utility files, or from the printer’s front
panel; see “Print quality modes” on page 3-27 for more
information.
Macintosh users
If you are using Adobe Photoshop, you can print using the
■
Tektronix PhaserPrint software plug-in to improve the image data
transfer time from your Macintosh to the printer. See the on-line
manual on the printer’s CD-ROM for instructions on installing
and using the plug-in.
6-18
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Windows 3.1 users
Note
Only use the following procedure if your computer is connected to
the printer through the parallel port or the optional serial port.
1. From the Control Panel, double-click Printers.
2. In the Printers dialog box, select the Tektronix Phaser 350 printer,
(or Tektronix Phaser 350 600x300 if you have the printer’s
Extended Features option) then click Setup. A dialog box appears
with the printer’s name across the top.
3. Click the PostScript tab.
4. In the Performance Options field, select the Use PostScript
Level 2 Features option.
5. Click the Job Control tab.
6. For better performance, select the Binary Mode option.
7. From your application, choose the Tektronix Phaser 350 as
your printer.
8. Try printing the document again.
User Manual
6-19
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Windows 95 users
1. Click the Start icon in the taskbar on your screen; a menu appears.
2. Move the cursor over Settings; another menu appears.
3. In the menu, click Printers; the Printers window appears.
4. In the Printers window, select the Phaser 350 printer icon (or
Phaser 350 600x300 if you have the printer’s Extended Features
option), then select Properties from the File menu.
5. Click the PostScript tab, then click the Advanced button.
6. Select Use PostScript Level 2 features.
7. Select Binary communications protocol under Data format.
8. Click OK when finished.
9. Try printing the document again.
UNIX workstation users
Workstation users can use the PhaserPrint software for UNIX to significantly
increase printer performance when printing bitmapped images; refer to
“Workstation software” on page 2-61 for details.
6-20
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
If your file doesn’t print
If you've configured a supported driver for your printer but your printer
isn't printing, try the following suggestions. If these suggestions fail to solve
the problem, copy the Tektronix PostScript Level 2 error handler utility to
your printer to determine what is wrong. Refer to “Using a PostScript error
handler” on page 6-27 for information on using the error handler.
General things to check for
Macintosh users
■
Open the Chooser and select a supported driver, such as the
LaserWriter 8.x, and your printer.
■
If the driver isn’t installed or properly set up with your printer,
refer to “Macintosh software” on page 2-52 for instructions.
■
■
Make sure that Background Printing is turned off.
Close the Chooser and try printing again.
■
■
If you are having trouble printing from the Finder in System 7.1,
for example if the driver’s dialog boxes are not opening, it may be
because the Finder doesn’t have enough allocated memory.
Reinstall a supported driver to automatically allocate enough
memory for printing from the Finder.
For PCI-based PowerMacs, you should be using the latest version
of Open Transport, available from Apple Computer.
User Manual
6-21
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Windows users (general)
■
Check to make sure that you have configured the communications
ports and the Handshake option correctly. Refer to “Printing Help
Pages from the front panel” on page 2-29 for information on
printing a configuration page.
■
Make sure that you are using the correct cables for your computer
and printer. See “Interface cables and adapters” on page 8-3 for
cable information.
Windows 3.1 users
■
Make sure that your printer is connected to the port you selected
in the driver’s Printers/Connect dialog box.
■
Check the Options dialog box to make sure Printer, not
Encapsulated PostScript File, is selected in the driver’s
Print To box.
■
If the error message Windows Header has not been downloaded to the
printearppears on your computer screen, click the Job Control tab
and click one of the options for PostScript Header. Refer to “Using
the Adobe PostScript driver for Windows 3.1” on page 3-9 for
details on the Job Control tab.
Windows 95 users
■
■
■
Make sure that your printer is connected to the port you selected
in the driver’s Details tab.
Make sure that the correct port is selected in the driver’s
Details tab.
If the error message Windows Header has not been downloaded to the
printearppears on your computer screen, click the PostScript tab
and click one of the options for PostScript Header. Refer to
“Using the Microsoft PostScript driver with Windows 95” on
page 3-4 for details on the PostScript tab.
6-22
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
If you are using PC/NFS
If you have PC/ NFS software installed on your computer, you need to make
the following selection in the Network Options dialog box:
1. From the Main window, double-click the Print Manager icon.
2. From the Options menu in the Print Manager, select
Network Settings.
3. In the Network Options dialog box, uncheck the
Print Net Jobs Direct box.
4. Click OK.
If you can’t print from Windows to an LPT port
Windows 3.1
If your printer is connected through an LPT (parallel) port and your
document doesn’t print, try the following:
1. Double-click the Printers icon in the Control Panel.
installed printers.
3. Click the Connect button; the Connect dialog box appears.
4. Change your port connection from LPTx to LPTx.DOS
(where x is 1, 2, or 3).
5. Click OK.
Note
Also, refer to “Fixing timeout problems in Windows” on
page 6-29 for instructions on fixing timeout problems.
User Manual
6-23
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Windows 95
1. Select Start in the taskbar on your screen.
2. In the menu that appears, select Settings.
3. In the next menu, select Printers; the Printers window appears.
4. Click on your printer’s icon and select Properties from the
File menu.
5. Click the Details tab.
6. Click Add Port.
7. Click Other.
8. Make sure Local Port is highlighted, then click OK.
9. Type LPTx.DOS (where x is 1, 2, or 3).
10. Click OK.
11. In the Details tab, the Print to the following port should be
LPT.DOS (unknown local port).
6-24
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Check the printer’s language mode
If your file doesn’t print, the language on the printer’s port you are using
may have been changed.
Note
Monochrome PCL5 is optional and must be authorized before you
can use it; see the on-line manual on the printer’s CD-ROM for
instructions.
1. Print a copy of the printer’s configuration page to see the language
mode on each port. Refer to the on-line manual on the printer’s
CD-ROM for instructions on printing a configuration page.
2. If the printer port you are using has the wrong language set for the
type of application you are using, send one of the following utility
files to the printer:
■
■
■
To print PostScript files, use the PSCRIPT.PS file to set up a port to
receive PostScript. Refer to the on-line manual on the printer’s
CD-ROM for details.
To print HP-GL files, use the HPGL.PS file to set up a port to receive
HP-GL. Refer to the on-line manual on the printer’s CD-ROM for
details.
To print PostScript, or HP-GL, or Monochrome PCL5 files
interchangeably, use the AIS.PS file to set up a port for automatic
language selection. Refer to the on-line manual on the printer’s
CD-ROM for details.
User Manual
6-25
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
PostScript printing errors
Note
For information on specific applications, request a document
catalog from HAL or EuroHAL, the Tektronix automated fax
systems. Refer to “Using the automated fax systems” on page 6-2
for instructions on using these systems.
If you get a PostScript error when printing from Aldus PageMaker, Aldus
FreeHand, QuarkXPress, or Canvas, you may be using an older or incorrect
version of the printer description file.
1. You should always use the most current printer description file.
To determine the date of the file you are using, do the following:
■
■
■
Macintosh users:
Select (highlight) a printer description file and choose Get Info
Windows 3.1 users:
Check a printer description file’s creation date in the File Manager.
Make a note of the version date.
Windows 95 users:
Check a printer description file’s creation date in the Windows
Explorer. Make a note of the version date.
2. Check Tektronix’ on-line services to see if the printer-related files
you have are the most recent. Refer to the on-line manual on the
printer’s CD-ROM or “If you need help” on page 6-1 for
information on Tektronix’ online services.
6-26
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Using a PostScript error handler
The error handling utility is useful for diagnosing problems when a job
doesn’t print. This utility installs a PostScript error-handling function in the
printer to help determine the cause of some PostScript printing problems.
PostScript errors are printed on a page with other status information when
an error occurs. This utility can be useful to programmers for debugging
PostScript code.
To turn on the error handler, follow the instructions below. To turn off the
error handler, turn the printer off, wait 15 seconds, and turn the printer on
again. Alternately, refer to the on-line manual on the printer’s CD-ROM for
instructions on resetting the printer to turn off the error handler. Use the
following utility files for your computer type:
Macintosh file name
PC file name
Tek Error Handler and
LaserWriter Utility
TEKEHAND.PS
Macintosh users
1. Refer to “Using the Macintosh Installer” on page 2-53 for
instructions on installing the utility files from the printer’s
CD-ROM.
2. Select the appropriate printer in the Chooser.
3. Locate the LaserWriter Utility in the PhaserTools folder on your hard
disk, and double-click its icon to start the application.
4. Choose Download PostScript File from the Utilities menu.
5. Select the Tek Error Handler file from the list, then click Open. (This
file was installed in the Printer Utilities folder inside the PhaserTools
folder.)
6. At the prompt Save PostScript output as:you are asked
for a file name for saving printer output. Use either the default
name given in the edit box or type a new name. Click Save to
send the file to the printer.
User Manual
6-27
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
7. If no output is returned by the printer, the LaserWriter Utility
displays a dialog box; click OK continue.
PC and workstation users
1. Locate the utility files in the PHSR350 directory on the printer’s
CD-ROM.
2. Copy the TEKEHAND.PS file to your hard disk or use the file
directly from the CD-ROM.
3. Send the TEKEHAND.PS file to the printer using one of the
following methods:
■
■
PC users: Use the DOS COPY command to send the file to the
printer. (Windows 3.1 users can also use the Copy command in the
File Manager.)
Workstation users: Send the file to the printer as you would any
PostScript file.
6-28
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Fixing timeout problems in Windows
If print jobs are timing out and not printing, you may need to increase the
timeout values in Windows and in the printer.
Try one of the following procedures to change the Windows timeout. If the
Windows procedure doesn’t work for you, try the DOS procedure. Then,
follow the procedure to change the printer’s timeout.
Windows timeout: From Windows 3.1
1. Open the Control Panel from the Main menu.
2. Double-click the Printers icon to open the Printers dialog box.
3. Click on your printer’s icon.
4. Click the Connect button to open the Connect dialog box.
5. Increase the Transmission Retry to 950 seconds by typing in the
new number.
6. Click OK.
Windows timeout: From Windows 95
1. Click the Start icon in the taskbar on your screen; a menu appears.
2. Move the cursor over Settings; another menu appears.
3. In the menu, click Printers; the Printers window appears.
4. In the Printers window, select the Phaser 350 printer icon (or
Phaser 350 600x300 if you have the printer’s Extended Features
option), then select Properties from the File menu.
5. Click the Details tab and increase the Transmission Retry to 999
seconds (or higher).
6. Click OK.
User Manual
6-29
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Windows timeout: From DOS (and Windows 3.1)
Note
To use this procedure, the printer must be connected directly to
your computer, not on a network.
1. At the DOS prompt, issue the DOS MODE command by typing
the following:
MODE LPT1:,,P
2. Start Windows 3.1.
3. Open the Control Panel from the Main menu.
4. Double-click the Printers icon to open the Printers dialog box.
5. Click the Connect button to open the Connect dialog box.
6. Change the port selection from LPT1 to either LPT1.DOS or
LPT1.OS2, depending on the options you see in the dialog box.
7. Click OK.
6-30
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Printer’s timeout
Note
This is the basic procedure for changing one of the printer’s
timeout values. For more information on the printer’s timeouts,
refer to the on-line manual on the printer’s CD-ROM.
You can use the CONFIG.PS file to change the PostScript and HP-GL job and
wait timeout values. When sent to the printer, your edited version of the
CONFIG.PS file changes the values in the printer, but only while the printer
is turned on; if the printer is turned off or reset the values return to their
defaults. To restore your desired timeout settings, you must send your
edited CONFIG.PS file to the printer again.
Note
The CONFIG.PS file affects printer operation. If the printer is
shared on a network, using this file may affect the prints requested
by other users.
1. Locate the utility files in the PHSR350 directory on the printer’s
CD-ROM.
2. Copy the CONFIG.PS file to your hard disk.
3. Open the file using a text editor. The default value is 40 seconds
for the wait timeout. Change the value in the WaitTimeOut line to
999.
4. Use one of the following methods to send the CONFIG.PS file to
the printer:
■
■
PC users: Use the DOS COPY command to send the file to the
printer. (Windows 3.1 users can also use the Copy command in the
File Manager.)
Workstation users: Send the file to the printer as you would any
PostScript file.
User Manual
6-31
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
In general
■
■
Select another Color Correction option in a supported driver and
print your image again; refer to “Color correction descriptions” on
page 4-6 for more information.
If you are not using a supported driver and are sharing the printer
with other users on a network, another user may have changed
the printer's color adjustment setting. Refer to “Sharing the
■
If you use the driver's Use Printer Setting option and printed
colors are not what you expected, check the following:
■
■
A selection may have been made in the TekColor Correction menu
on the printer's front panel. These settings change the printer's
color correction setting.
A color correction utility file may have been downloaded to the
printer. These files change the printer's color correction setting.
Refer to “Sharing the printer on a network” on page 6-39 for
details on how these settings affect prints made from a driver.
6-32
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Printing PANTONE Colors
If Phaser 350 printer’s printer-specific PANTONE Colors are not printing as
expected, make sure you are printing with Enhanced (600 x 300) mode with
color corrections set to None. Refer to “Printing the PANTONE Color Chart”
in the on-line manual on the printer’s CD-ROM for more information.
There are many variables in process reproduction of colors generated by the
Phaser 350 printer, any one of which may affect the quality of the PANTONE
Color simulation, including:
■
■
■
■
Type of ink used on printing press
Type of ink film used on printing press
Effective final resolution
Dot structure/ halftones
If you have questions about PANTONE Color Matching, you can get
information in the following places:
■
HAL: Request a document catalog from HAL or EuroHAL,
Tektronix’ automated fax systems. Refer to “Using the automated
fax systems” on page 6-2 for instructions on using HAL and
EuroHAL.
■
World Wide Web: If you have access to the Internet, you can view
selected topics on the Phaser 350 printer’s web page. Access the
printer’s documentation from this web address:
http://www.tek.com/Color_Printers/userdoc/introduction.html
Blue colors look too purple
If printed blue colors look too purple, print your document with the
Vivid Color color correction. Refer to “TekColor corrections — making the
best selection” on page 4-3 for more information.
User Manual
6-33
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Using the Tektronix halftone screens
Tektronix halftone screens are designed for Tektronix printers, and improve
print quality over application-set halftone screens. The Setscreen Off
(SCRENOFF.PS) utility file redefines some PostScript operators, such as the
setscreen, setcolorscreen and sethalftone. By default, the printer prevents
applications from overriding the Tektronix proprietary halftone screens.
Use the following utility files, depending on your computer type, to control
application-defined halftone screens in your prints.
Macintosh file name
PC file name
Setscreen On
Setscreen Off and
LaserWriter Utility
SCRENON.PS
SCRENOFF.PS
Macintosh users
1. Refer to “Using the Macintosh Installer” on page 2-53 for
instructions on installing the utility files from the Phaser 350
printer’s CD-ROM.
2. Select the appropriate printer in the Chooser.
3. Locate the LaserWriter Utility in the PhaserTools folder on your hard
disk, and double-click its icon to start the application.
4. Choose Download PostScript File from the Utilities menu.
5. Select either the Setscreen On or the Setscreen Off file from the list,
then click Open. (These files were installed in the Printer Utilities
folder, inside the PhaserTools folder.)
6. At the prompt Save PostScript output as:you are asked
for a file name for saving printer output. Use either the default
name given in the edit box or type a new name. Click Save to
send the file to the printer.
7. If no output is returned by the printer, the LaserWriter Utility
displays a dialog box; click OK continue.
6-34
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
PC and workstation users
1. Locate the utility files in the PHSR350 directory on the printer’s
CD-ROM.
2. Copy the files that you need to your hard disk or use them directly
from the CD-ROM.
3. Use one of the following methods to send the SCRENON.PS or the
SCRENOFF.PS file to the printer:
■
■
PC users: Use the DOS COPY command to send the file to the
printer. (Windows 3.1 users can also use the Copy command in the
File Manager.)
Workstation users: Send the file to the printer as you would any
PostScript file.
User Manual
6-35
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Selecting page sizes in Windows applications
In some Windows applications, you can select printer page sizes in a Print
Setup dialog box accessed from the File menu. If you use a Print Setup
dialog box to select the Phaser 350 printer from your application, some page
sizes may not be visible in the list.
If the Phaser 350 printer page size you want to use is not visible in the list, do
the following:
Windows 3.1
1. From the Main window, open the Control Panel and double-click
the Printers icon.
2. In the Printers dialog box, select the Phaser 350 printer in the list
of printers.
3. Click the Setup button.
4. In the Setup dialog box, select the page size you want and
click OK.
5. Return to your application. If you open the Print Setup dialog
box again from within your application, the page size selection
may be blank. The page size you just selected in the driver is still
selected, it is just not visible in the list.
6. Print as usual.
If you open the Print Setup dialog box from within an application, and the
page size selection is blank, the blank represents the page size last selected
from the printer driver through the Control Panel. You can leave the page
size selection blank and print as usual, or you can select another page size
from the list.
6-36
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Windows 95
1. Click the Start icon in the taskbar on your screen; a menu appears.
2. Move the cursor over Settings; another menu appears.
3. In the menu, click Printers; the Printers window appears.
4. In the Printers window, select the Phaser 350 printer icon, then
select Properties from the File menu.
5. Click the Paper tab.
6. Choose your page size, and click OK.
7. Return to your application.
User Manual
6-37
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
Fonts printing incorrectly from Windows
If fonts are printing incorrectly from Windows, make sure you installed the
correct printer with either the Adobe PS3 driver for Windows 3.1, or with the
Windows 95 PostScript driver.
■
If you have the standard version of the printer, you should have
installed Tektronix Phaser 350.
■
If you have the printer’s Extended Features option, you should
have installed Tektronix Phaser 350 600x300 for Windows to
recognize and use all of the printer’s fonts.
If you select Tektronix Phaser 350 600x300 and you have only the
standard version of the printer with 17 fonts, any of the additional
fonts selected within an application are printed in the Courier
typeface.
If you are not sure which version of the printer you have, print a copy of the
printer’s startup page. The standard configuration has 17 fonts and
8 Mbytes of memory; the Extended Features option has 69 fonts and
24 Mbytes of memory. Refer to “Printing Help Pages from the front panel”
on page 2-29 for instructions on printing a startup page.
Refer to Chapter 2 for instructions on installing the printer and drivers.
6-38
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Sharing the printer on a network
Driver, utility files, and front panel interactions
If your Phaser 350 printer is shared by other users on a network, using the
downloadable utility files or the printer’s front panel to change the printer’s
default color correction setting can affect prints made by other users.
■
When you print from a supported driver with any TekColor color
correction selection except Use Printer Setting, the driver selection
overrides the following selections for prints made from the driver:
■
A color correction utility file, if one has been downloaded to the
printer.
■
The selection on the printer’s front panel TekColor Corrections
menu.
■
When you print from a supported driver with the Use Printer
Setting option, your images are printed with one of the following
selections:
■
A color correction utility file, if one has been downloaded to the
printer.
■
The selection on the printer’s front panel TekColor Corrections
menu.
User Manual
6-39
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Troubleshooting
■
When you print from a non-supported driver, your images are
printed with one of the following selections:
■
A color correction utility file, if one has been downloaded to the
printer.
■
The selection on the printer’s front panel TekColor Corrections
menu.
■
If the colors on your prints are not what you expected, and your
system administrator has disabled some of the printer’s front
panel menus, ask them what settings are in effect and whether a
color correction utility file has been downloaded to the printer.
You can also print a configuration page to see the current color
correction selection; see “Printing Help Pages from the front
panel” on page 2-29 for instructions.
If the LaserWriter Utility does not work
The LaserWriter Utility cannot be used if the printer is connected to a print
server. See your system administrator to temporarily remove the printer
from the print server to download any of the PostScript utility files.
If you are using PC/NFS and Windows 3.1
If you have PC/ NFS software installed on your computer, you need to make
the following selection in the Network Options dialog box:
1. From the Main window, double-click the Print Manager icon.
2. From the Options menu in the Print Manager, select
Network Settings.
3. In the Network Options dialog box, uncheck the
Print Net Jobs Direct box.
4. Click OK.
6-40
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
7
Using the Front Panel
Front panel overview
The printer’s front panel provides you with information about the printer’s
operation, as well as buttons for accessing printer menus.
Front panel indicators
The front panel also includes two indicator lights:
1. Power (green LED)
2. Error (red LED)
Power
Error
1
2
Exit
9101-68
Indicator
1. Power
On
Blinking
Off
The printer is on and ready for
operation.
The printer is processing or
printing an image.
The printer is not ready, or
there is an error.
The printer is in interactive
mode: you have pressed the
Menu button.
2. Error
If the indicator is on after the
power-up sequence, the printer’s
controller board detects an error
that is not user-correctable; the
printer requires service.
The printer requires attention:
ink is low, for example.
Normal operation: there are
no print engine or controller
board errors.
User Manual
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Using the Front Panel
Front panel buttons
Exit
1. The
button allows you to perform these menu functions:
■
Back up a level of the menu without making a selection.
Exit the menu.
■
2. Button 2, labeled Info, lets you cycle through information such as
the printer’s name, print server name, and the printer’s IP
address. Pressing Infoduring a print job displays the job name
and job source. When you enter the front panel menu by pressing
Menu, Button 2 lets you:
■ <---- Scroll backward through the available selections.
3. Button 3, labeled Cleanduring normal operation, lets you access
the cleaning menus. When you enter the front panel menu by
pressing Menu, Button 3 changes meaning as you select
sub-menus:
■ ----> Scroll forward through the available selections.
■ Cancel Cancel a print job or selection.
■ Confirm Confirm an address change (IP, Broadcast, Gateway).
4. Button 4, labeled Menu during normal operation, lets you enter
the front panel menu. After entering the menu, Button 4 changes
meaning as you select sub-menus:
■ Menu
Provides access to sub-menus.
■ Print Executes the selected print.
■ OK
Accepts the selected value.
Exit
1
2
3
4
9101-66
7-2
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Front Panel
7
Two-line display
The two lines of the display have the following functions:
Line 1
■
Displays status messages such as Ready, Printing or the
printer’s name.
■
■
Displays operation errors and warnings such as Out Of Ink.
Displays the names of menus and parameters you can set.
Line 2
■
Displays button labels such as <----for previous, ---->for next,
Infofor displaying printer information, Menu for access to a
menu of selections, Cleanfor access to cleaning menus, and
Printand OK to make selections.
Warming Up
Info
1
2
Power
Error
Clean
Menu
Exit
9682-06
Refer to “Front panel messages” on page 6-3 for a description of the front
panel messages. For a roadmap to the front panel menu selections, refer to
the Menu Map later in this chapter.
User Manual
7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Using the Front Panel
Enabling and disabling the front panel menu
The printer allows a system administrator to lock the front panel menu by
downloading a utility file. In this protected mode, you can print the pages in
the Help Pages menu, but cannot modify any settings in the rest of the menu.
For more information on enabling and disabling the front panel menu, refer
to the printer’s CD-ROM or the World Wide Web.
When the front panel is enabled, all front panel menu selections are
available.
■
Press the Menu button. The front panel displays the following
message:
Help Pages
<---- ----> Menu
When the front panel is disabled and you press the Menu button, the display
shows only the pages in the Help Pages menu (without the heading):
Configuration Page
<---- ----> Print
To access the entire menu with the front panel disabled, you must use a
special key sequence to enter the menu.
Exit
■
Press and hold down the Menu button and press the
button.
The front panel displays the following message:
Help Pages
<---- ----> Menu
The full set of menus is now available.
7-4
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Front Panel
7
Front panel menu map
Phaser® 350 Menu Map
<---
--->
scrolls backward through available selections
scrolls forward through available selections
enters the next sub-menu
Menu
Press
Menu
Exit
OK
exits without making a change
accepts the displayed value as the new setting
Help Pages
<---
<---
--->
Exit
Exit
Exit
Menu
Menu Map
Configuration Page
Startup Page
Demonstration Pages
RGB Color Sampler
CMYK Color Sampler
Page Count
--->
View
TekColor Correction
Vivid Color (default)
Display
SWOP
Euroscale
Commercial
Monochrome
None
<---
<---
<---
<---
--->
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Print Quality
Fast Color
Standard (default)
Enhanced (600 x 300)
--->
Exit
Exit
Exit
Exit
Exit
Exit
Printer Defaults
Default Tray
Startup Page
SCSI Startup Mode
Cleaning Page Source
Energy Star Timeout
Check Print
Check Print Timeout
--->
Serial Settings
Baud Rate
Data Bits
Stop Bits
Parity
Flow Control
--->
Network Settings
TCP/IP
EtherTalk or TokenTalk
NetWare
HTTP
<---
--->
Service Support
Cool Down For Power Off
Head Serial Number
Calibration Date
Engine FW Version
Fault History
Purge Volume
<---
<---
--->
Head Version
Language
English (default)
Español
Français
Deutsch
Italiano
Japanese
--->
Enhanced print quality (600 x 300 dpi) configuration only.
Appears when appropriate PhaserShare™ card is installed.
9682-08
User Manual
7-5
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Using the Front Panel
Printer Help Pages
The printer has several Help Pages that you can print from the front panel to
learn more about the printer.
Menu Map
The menu map provides a graphical view of the front panel menus. The
menu map can be used as a convenient navigation aid for quickly
determining the location of menu items. An online version of the menu map
is also available on the World Wide Web.
Configuration Page
The configuration page lists information on the printer’s hardware and
software configuration and current settings. This page is especially useful
during network installation and troubleshooting. You can print the
configuration page through the front panel, by sending a PostScript
language file to the printer (refer to the printer’s CD-ROM), or through the
World Wide Web (refer to the PhaserShare Status Software User Manual).
Startup Page
The startup page lists the number of pages printed, installed interface ports,
software version numbers, installed RAM memory, the number of fonts in
memory, and other useful information. By default, printing of the startup
page is enabled on power up.
Printing of the startup page can be enabled and disabled through the front
panel menu, by sending a PostScript language utility file to the printer,
through the LaserWriter utility on the Macintosh, or through the World Wide
Web (refer to the PhaserShare Status Software User Manual). If the printer
detects a non-fatal failure, it automatically prints a startup page containing
diagnostic information regardless of the startup page setting in the front
panel menu.
7-6
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Front Panel
7
Demonstration Pages
These pages are sample demonstration pages you can print through the
front panel or through the World Wide Web (refer to the PhaserShare Status
Software User Manual.)
RGB and CMYK Color Samplers
The RGB and CMYK color samplers provide multi-page charts containing
color samples and their corresponding color values based on the RGB and
CMYK color models. Print these charts to help you select colors for use in
your documents. You can print the color sampler charts through the front
panel or from the printer’s CD-ROM.
Printing the help pages
1. While the Readymessage is displayed, press the Menu button.
The printer displays the first item in the menu:
Help Pages
<----
---->
Menu
2. Press the Menu button to access the Help Pages. The following
message appears:
Menu Map
<----
---->
Print
3. Press the left arrow (<----)or right arrow (---->)buttons
until the help page you want appears, for example the
Configuration Page:
Configuration Page
<----
---->
Print
4. Press the Printbutton to print the page.
User Manual
7-7
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Using the Front Panel
Printer standby modes
You can change the Energy Star mode through the front panel or through the
World Wide Web (refer to the PhaserShare Status Software User Manual.)
Idle for 4 hours When the printer is idle for more than 4 hours, it goes into a
standby mode that keeps the printer ready to use yet reduces energy
consumption.
The printer exits standby mode when you send a file to the printer, press any
front panel button, install or remove a media tray, or open any cover. For
example, adding ink causes the printer to exit standby mode. When the
printer exits this standby mode, it is ready to print in about 5 minutes.
Energy Star mode When the printer is idle for the time set in the Energy Star
front panel menu, it cools down completely. When the printer exits the
Energy Star mode, it is ready to print in about 10–15 minutes.
For printers ordered with the Energy Star option, the Energy Star default is
set to one hour. After an hour of inactivity, the printer begins a cool-down
cycle that requires a 10–15 minute warm-up period before being ready to use
again. Increasing the Energy Star value from one hour keeps the printer
ready for printing and eliminates the warm-up period. In the printer’s
standard configuration, the Energy Star default is set to 999 hours.
Since the printer uses ink during warm-up from a power-off condition and
when exiting Energy Star mode, you can reduce ink consumption by leaving
the printer on. To ensure optimum printing performance and best ink
economy, leave the printer turned on overnight and during weekends.
7-8
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Front Panel
7
Selecting the cleaning page source
The printer picks sheets of paper from a designated media tray as part of its
self-maintenance and jam recovery routines. The default cleaning page
source for the printer is the upper tray. When the Lower Paper Tray
Assembly is installed, you can change the source of the cleaning page to the
lower tray to prevent the printer from using transparencies or letterhead
loaded in the upper paper tray.
You can change the cleaning page source through the front panel, by sending
a PostScript language file to the printer (refer to the printer’s CD-ROM), or
through the World Wide Web (refer to the PhaserShare Status Software User
Manual).
To change the cleaning page source from the printer’s front panel, follow
these steps:
1. While the Readymessage is displayed, press the Menu button.
The printer displays the first item in the setup menu:
Help Pages
<----
---->
Menu
2. Using the left arrow (<----)or right arrow (---->)buttons,
scroll through the selections until the following message appears:
Printer Defaults
<----
---->
Menu
3. Press the Menu button to access the printer defaults settings.
4. Using the left arrow (<----)or right arrow (---->)buttons,
scroll through the selections until the following message appears:
Cleaning Page Source
<----
---->
Menu
User Manual
7-9
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Using the Front Panel
5. Press the Menu button to access the cleaning page source settings.
Cleaning Page Source:Upper
<----
---->
OK
6. Scroll through the settings until you reach the one you want. Press
the OK button to confirm the setting.
Exit
7. To return to the top level of the menu, press the
button until
the printer displays the Readymessage.
7-10
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
8
Supplies, Accessories,
and Expanding your
System
Tektronix supplies: the mark of quality
Tektronix supplies are developed and tested as a total system — printer, ink,
and media. These system components work together to produce consistent,
high-quality color images. For the best results, order Tektronix supplies.
Caution To avoid damaging the printhead, only use Tektronix
Phaser 340/350 ColorStix® solid-ink sticks in the printer.
Customizing your printer
Tektronix offers upgrade and accessory kits to expand your printer’s
capabilities. To order upgrade kits, refer to the information provided in this
chapter or the supplies information sheet that was shipped with the printer
and contact your local dealer or Tektronix office. In the United States, call
Tektronix at 1-800-835-6100.
User Manual
8-1
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Supplies, Accessories, and Expanding your System
Ordering printer supplies
For a complete list of printer supplies, refer to the supplies information sheet
that was shipped with the printer and contact your local dealer or, in the
United States, call Tektronix at 1-800-835-6100.
Printer supplies and accessories
Order number
016-1307-00
016-1308-01
016-1309-01
016-1310-01
016-1361-00
016-1362-00
016-1359-00
016-1360-00
016-1368-00
016-1369-00
436-0294-03
436-0299-00
016-1341-00
006-7824-01
070-9682-00
070-9538-01
Description
Phaser 340/350 ColorStix Solid Ink — 3 Black sticks
Phaser 340/350 ColorStix Solid Ink — 3 Cyan sticks ★
Phaser 340/350 ColorStix Solid Ink — 3 Magenta sticks ★
Phaser 340/350 ColorStix Solid Ink — 3 Yellow sticks ★
Letter-size Tektronix premium transparency*, 50 sheets
A4-size Tektronix premium transparency*, 50 sheets
Letter-size Tektronix standard transparency, 50 sheets
A4-size Tektronix standard transparency, 50 sheets
Letter-size Tektronix paper, 500 sheets, 90 g/m2 (24 lb.)
A4-size Tektronix paper, 500 sheets, 90 g/m2 (24 lb.)
Phaser 340/350 maintenance tray (includes waste ink tray)
Phaser 340/350 waste ink tray (pack of 5)
Cleaning kit: cleaning tray, alcohol wipes, foam swabs, bottle
Pack of 10 lint-free, alcohol-soaked cleaning wipes
Phaser 350 User Manual
PhaserShare Network Cards and Software
System Administrator Manual
070-9539-01
063-2546-00
063-2550-00
063-2543-00
PhaserShare Status Software User Manual
Phaser 350 Drivers and Utilities diskette set
Phaser 350 CD-ROM; standard configuration
Phaser 350 CD-ROM; Extended Features configuration
* Tektronix premium transparency offers enhanced ink adhesion and superior print quality.
★ Free Black ColorStix Ink: Three Phaser 340/350 ColorStix Black ink sticks are shipped free of
charge with every order of Cyan, Magenta or Yellow ColorStix Ink. To order Black ColorStix ink
separately, call Tektronix at 1-800-835-6100.
8-2
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplies, Accessories, and Expanding your System
8
Interface cables and adapters
The following cables and adapters are available through Tektronix or your
dealer. Contact your dealer for other cables and adapters.
Printer interface cables and adapters
Order number Description
Connectors and cable length
012-1468-00
Parallel cable
36-pin high-density plug to 25-pin DSUB plug;
3 meters (9.84 feet)
Connects the printer’s parallel port to a PC or workstation parallel port.
Parallel/Centronics adapter parallel adapter: converts 36-pin low-density 1284-B
plug to 36-pin high-density 1284-C plug
013-0299-00
Adapts your system’s existing low-density, Centronics parallel cable connector to the printer’s
high-density parallel connector.
012-1465-00
012-1299-00
013-0297-00
SCSI-2 HD to SCSI-1 LD cable
50-pin high-density plug to 50-pin low-density plug;
2.0 meters (6.56 feet)
Connects the printer’s SCSI port to a hard disk drive or the Phaser Copystation SCSI port.
SCSI-1 LD to Macintosh SCSI cable 50-pin low-density plug to Macintosh SCSI 25-pin plug
Combine with 013-0297-00 to connect the printer’s SCSI port to a hard disk drive with
Macintosh SCSI 25-pin plug.
SCSI-1 LD to SCSI-2 HD adapter
SCSI adapter: converts 50-pin low-density plug to
50-pin high-density plug
Use with either 012-1465-00 or 012-1299-00 to convert a low-density SCSI connection to a
high-density SCSI connection.
012-1379-00
012-1380-00
Serial (RS-232) Null modem cable
9-socket receptacle to 9-socket receptacle;
1.8 meters (6 feet)
Connects the printer’s serial port to a PC or workstation serial port.
Serial (RS-232) Null modem cable 9-socket receptacle to 25-socket receptacle;
1.8 meters (6 feet)
Connects the printer’s serial port to a PC or workstation serial port.
User Manual
8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Supplies, Accessories, and Expanding your System
Extended Features upgrade
In its standard configuration, the Phaser 350 offers Fast Color and Standard
color printing modes, 8 Mbytes of RAM memory, and 17 fonts. The
Extended Features upgrade is especially suited for workgroups, enhancing
the printer’s performance in the following ways:
■
■
Adds Enhanced (600 x 300) color printing mode.
Adds 16 Mbytes of memory, totalling 24 Mbytes. More memory
provides job pipelining to speed printer throughput and
offloading of print jobs from your computer, faster processing of
image data, and additional storage for more downloadable fonts.
■
■
Adds 52 fonts for a total of 69 fonts.
Provides a Check Print feature allowing you to review the first
page of a document or multi-page print job before continuing.
Refer to “Previewing with Check Print” on page 4-14 for more
information.
■
Provides a collation feature for printing several copies of a
multiple-page document. Refer to “Using the Quick Collate
option” on page 4-12 for more information. Requires use of an
approved external SCSI hard disk; refer to “Selecting a SCSI hard
disk” on page 2-24 for more information.
Note The startup page reports the printer’s configuration, including
installed RAM memory and fonts. For information on the
startup page, refer to “Printer Help Pages” on page 7-6.
The Extended Features upgrade consists of a replacement ROM and
additional memory, both of which are required. To determine if your printer
has the Extended Features option, check for the number of fonts listed on the
printer’s startup page. If you only have 17 fonts available, the printer does
not have the extended feature set.
Note To order the Extended Features upgrade for a Phaser 350 printer,
use Tektronix order number Z350FX.
8-4
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplies, Accessories, and Expanding your System
8
Optional Lower Paper Tray Assembly
An optional Lower Paper Tray Assembly for paper printing is available for
the printer. With a 500-sheet capacity, the Lower Paper Tray Assembly
transforms the printer into a high-volume printing solution for networked
environments.
Using the optional Lower Paper Tray Assembly, you can configure the
printer for dual-tray printing capability. Two trays are especially useful if
you commonly print on several types of media, for example office paper in
the lower tray and transparencies, letterhead, or label media in the upper
tray.
To order, use these Tektronix order numbers:
Order number
Description
Z340LTA
Lower Paper Tray Assembly, holds 500 sheets of paper
(US Letter-size paper tray)
Z340LTA: Option 01
Substitute A4 metric-size paper tray
User Manual
8-5
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Supplies, Accessories, and Expanding your System
Optional media trays
The printer is shipped with a Letter- or A4-size paper tray. Additional trays
can be ordered for convenience. For printing transparencies, the optional
transparency tray is recommended.
Order number
436-0301-00
436-0302-01
436-0293-01
436-0292-01
436-0288-00
Description
Letter-size transparency tray
A4-size transparency tray
Letter-size paper tray
A4-size paper tray
Replacement US Letter-size tray for Lower Paper Tray
Assembly (500-sheet capacity)
436-0289-00
Replacement A4 metric-size tray for Lower Paper Tray
Assembly (500-sheet capacity)
Refer to “Ordering printer supplies” on page 8-2 for information on ordering
Tektronix paper and transparencies.
Benefits of multiple media trays
Optional paper and transparency trays for Letter- and A4-sizes let you
configure the printer for different printing environments. An optional
Lower Paper Tray Assembly supports high-capacity printing requirements.
The Lower Paper Tray Assembly provides the advantages of a dual-tray
system by allowing paper and a second media (transparencies or letterhead)
to be simultaneously loaded in the printer.
8-6
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplies, Accessories, and Expanding your System
8
Memory upgrade
The Phaser 350 printer has 8 Mbytes of standard memory. You can upgrade
the printer to the Extended Features option which includes 24-Mbytes of
memory, 600 x 300 dpi printing, job collation, 52 additional fonts, check print
and job pipelining. To upgrade, order the Z350FX upgrade. Refer to
“Extended Features upgrade” on page 8-4 for more information.
Note The startup page reports how much RAM memory is installed in
the printer. You can use the startup page to determine the
amount of memory in the printer. For information on the startup
page, refer to “Printer Help Pages” on page 7-6.
You can add an additional 52 fonts to the standard 17 fonts by upgrading to
the Extended Features configuration. Refer to “Extended Features upgrade”
on page 8-4 for more information. Refer to “Fonts” on page 3-41 for more
information on font typefaces.
600 x 300 dpi upgrade
You can upgrade the Phaser 350 printer to print with 600 x 300 dpi resolution
print quality by ordering the Z350FX upgrade. Refer to “Extended Features
upgrade” on page 8-4 for more information.
User Manual
8-7
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Supplies, Accessories, and Expanding your System
PhaserShare network cards
Tektronix PhaserShare™ network cards offer high-performance network
connectivity for your color printer. PhaserShare network cards can be easily
installed in your printer.
Order number
Description
Z350FP1
Adds Ethernet interface; includes support for
Novell NetWare, EtherTalk, TCP/IP, Telnet and FTP.
(Same as Option P1.)
Z350FP3
Z350FP4
Adds LocalTalk/Serial interface. (Same as Option P3.)
Adds Token Ring interface; includes support for Novell
NetWare, TokenTalk, TCP/IP, Telnet and FTP.
(Same as Option P4.)
Benefits of networking the printer
Adding a PhaserShare network card to your printer makes it an efficient,
sharable printing resource in network environments. Network connections,
such as Ethernet, offer significant speed improvements compared to the
standard parallel communication connection. Several varieties of
PhaserShare cards allow the printer to be seamlessly integrated into popular
network configurations. All ports and protocols are simultaneously active,
allowing the printer to be used in mixed environments.
8-8
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplies, Accessories, and Expanding your System
8
Phaser Copystation
Note The printer’s Extended Features upgrade is required to use the
Phaser Copystation. See page 8-4 for details on the upgrade.
The Phaser Copystation adds easy-to-use, walk-up color copying capability
to the Phaser 350 Color Printer.
The Copystation’s front-panel controls let you specify the number of copies
and select among color, gray scale and black-and-white copying modes.
You can choose to make copies reduced to 25% or enlarged to 200% of the
original’s size, and you can adjust copies for color balance and lightness.
Note To order a Phaser Copystation, use Tektronix order number 4540.
For instructions on connecting a Phaser Copystation to your printer or
printer network and for operating instructions, refer to the
Phaser CopyStation User Manual.
PhaserPrint
For printing in Unix environments, Tektronix offers PhaserPrint™ software.
PhaserPrint software provides fast raster file and screen copy printing to
Tektronix color printers. PhaserPrint software also provides a graphical user
interface for push-button control of Tektronix printer features. PhaserPrint
software works with the workstation’s native spooling system to print
PostScript files and raster files in the Sun Raster Format (SRF), xwd, SGI
RGB, and other formats.
The printer’s CD-ROM contains a demonstration copy of the PhaserPrint
software and an on-line instruction guide in the phaserpr.unx directory.
Refer to “Printing from a workstation” on page 3-20 for more information.
Note To order PhaserPrint software, use Tektronix order number
4690F20.
User Manual
8-9
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Supplies, Accessories, and Expanding your System
PhaserSym
For printing in VMS environments, Tektronix offers PhaserSym™.
PhaserSym is a VMS print symbiont for DEC OpenVMS VAX, and DEC
OpenVMS AXP machines. PhaserSym facilitates communication between
VMS hosts and Tektronix Phaser printers. PhaserSym requires that the
Phaser printer include Ethernet support.
Note To order PhaserSym, use Tektronix order number 4690F41.
SCSI hard disk
A Tektronix-approved SCSI hard disk is available for use with the printer’s
SCSI port in the following ways:
External font storage. You can connect one or more external SCSI hard disks
to the printer for additional font storage.
External collation disk. For printers with the Extended Features option, you
must connect an external SCSI hard disk for multi-page job collation. Refer
to “Using the Quick Collate option” on page 4-12 for more information.
Note A 1.2 Gigabyte SCSI hard disk is required for job collation with
the Phaser 350 printer. To order the hard disk from Tektronix, use
part number Z350DSK.
8-10
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
9
Regulatory Information
and Specifications
Declaration of conformity
Tektronix, Inc.
Color Printing and Imaging Division
P.O. Box 1000
Wilsonville, Oregon 97070-1000 U.S.A.
declares, under our sole responsibility, that the product
Phaser 350 printer
to which this declaration relates, is in conformity with the following
standard(s) or other normative document(s):
For the
EN55022:1986
Limits and Methods of measurement of radio
interference characteristics of Information
Technology Equipment. Class B level.
For the
EN60555-2:1986
Disturbances in supply systems caused by
household appliances and similar electrical
equipment. Part 2: Harmonics.
For the
Electromagnetic compatibility Generic immunity
EN50082-1:1992
standard Part 1: Residential, Commercial and Light
Industry.
IEC801-2:1984
IEC801-3:1984
IEC801-4:1988
Following the provisions of the Electromagnetic Compatibility Directive
89/ 336/ EEC.
For the
EN60950
Safety of Information Technology Equipment
including Electrical Business Equipment.
Following the provisions of the Low Voltage Directive 73/ 23/ EEC.
User Manual
9-1
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Regulatory Information and Specifications
Canadian EMC (Electromagnetic Compatibility)
regulatory standards
■
This digital apparatus does not exceed the Class B for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
■
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limits applicables aux appareils
numériques de la classe B prescrites dans le Règlement sur le
brouillage radioélectrique édicté par le ministere des
Communications du Canada.
FCC Class B warning (for 115 VAC equipment)
The equipment described in this manual generates and uses radio frequency
energy. If it is not installed and used properly in strict accordance with
Tektronix’ instructions, it may cause interference with radio and television
reception.
This equipment has been tested and found to comply with the limits for a
Class B verified digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a commercial environment. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at his own expense.
Changes or modification not expressly approved by Tektronix can affect
emission compliance and could void the user’s authority to operate this
equipment.
Warning Changes or modifications not expressly approved by Tektronix
can affect emission compliance and could void the user’s
authority to operate this product. To ensure emission
compliance, use shielded interface cables.
9-2
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information and Specifications
9
Material Safety Data Sheets
Proper management of environmental resources protects the well-being of
our employees, customers, shareholders, and the communities we are a part
of worldwide.
Tektronix establishes and maintains sound environmental management
practices to accomplish this goal and to assure compliance with the laws,
regulations, and orders of the responsible governmental authorities
wherever Tektronix and its subsidiaries operate.
Tektronix, Inc. is complying with government regulations by providing
Material Safety Data Sheets for our products.
Color Printing and Imaging Division
Tektronix, Inc.
User Manual
9-3
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Regulatory Information and Specifications
MSDS for ColorStix ink sticks
Section I – Product identification
Trade name and Tektronix part number:
ColorStix Solid Ink — Black
ColorStix Solid Ink — Cyan
ColorStix Solid Ink — Magenta
ColorStix Solid Ink — Yellow
016-1307-00
016-1308-01
016-1309-01
016-1310-01
Section II – Information on ingredients
Ingredients:
Fatty amide waxes, Rosin ester, Phthalate ester, Black, cyan, magenta, or yellow dye
Section III – Hazards identification
Potential Health Effects:
Eyes: Contact unlikely. If any particles get into the eye, flush thoroughly with water.
Skin: Not an irritant based on test results.
Inhalation: Not an expected route of exposure.
Ingestion: Not an expected route of exposure. See section XI.
Section IV – First aid measures
None indicated. This product is a waxy solid and should not cause health hazards when used as intended.
Section V – Fire fighting measures
Flammable Properties:
Flash point: Above 200° F (NFPA class 3B).
Fire & explosion hazards: These inks will burn. No unusual hazards are expected.
Section VI – Accidental release measures
Spill Or Leak: Not applicable.
Section VII – Handling and storage
Handling: None.
Storage: Avoid high temperatures.
Section VIII – Exposure control – personal protection
Exposure Guidelines: No special protection indicated when used as intended. TLV/PEL: None established.
Section IX – Physical and chemical properties
Appearance: Waxy, solid. Black, blue, red or yellow in color.
Odor: None.
Solubility: Not water soluble.
Section X – Stability and reactivity
Stability: Stable.
Incompatibility With Other Materials: None.
Hazardous Polymerization: Will not occur.
9-4
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information and Specifications
9
Section XI – Toxicological information
Toxicity: Non-toxic orally.
Irritation: Not an irritant based on standard tests.
Sensitization: Not a sensitizer based on standard tests.
Carcinogenicity: Components or product not listed by IARC, NTP or OSHA.
Section XII – Ecological information
No known impact.
Section XIII – Disposal considerations
These products are not a hazardous waste as specified in 40CFR 261. Dispose in accordance with all Federal,
State, and Local regulations.
Section XIV – Transport information
D.O.T.: Not regulated.
NMFC: 101720 Sub. 3 - Ink, Printing, N.O.I., Class 55.
Section XV – Regulatory information
TSCA: All components of these inks are listed in the Toxic Substances Control Act inventory as verified by our
suppliers.
SARA: Not reportable.
RCRA: TCLP below hazardous waste levels set by EPA.
CERCLA: No reportable quantity for this material.
California Prop. 65: Not listed.
Section XVI – Other information
Original preparation date: August 23, 1994 R.C.
Tektronix, Inc.
P.O. Box 500
Chemical Documentation
Mail stop 55-769
Beaverton, Oregon 97077
Printer information: 1-800-835-6100
MSDS information: (503) 627-7255
User Manual
9-5
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Regulatory Information and Specifications
MSDS for silicone oil
Section I – Product identification
Trade name and Tektronix part number:
Silicone fluid (found in maintenance tray)
006-7912-00
Product use: Used in Tektronix Phaser 350 color printers.
Section II – Information on ingredients
Ingredients
Polydimethylsiloxane
CAS Number: 63148-62-9
Hazardous Ingredients:
None. This is not a hazardous material as defined by the OSHA Hazard
Communication Standard.
Section III – Hazards identification
Potential Health Effects:
Eyes: Direct contact may cause temporary discomfort with mild redness and dryness similar to windburn.
Skin: A single prolonged exposure (24 to 48 hours) causes no known adverse effect.
Inhalation: Not an irritant to respiratory passages.
Ingestion: Swallowing large amounts could cause discomfort.
Section IV – First aid measures
Eyes: Flush immediately with water.
Skin: Wipe off and wash with soap and water.
Inhalation: Not a likely route of exposure.
Oral: No first aid should be needed.
Section V – Fire fighting measures
Flammable Properties: Flammable limits not determined.
Flash point: 545° F, minimum open cup.
Fire & explosion hazards: No unusual hazards known.
Section VI – Accidental release measures
Spill Or Leak: Wipe with absorbent material and dispose in accordance with Federal, State, and Local regulations.
Section VII – Handling and storage
Handling: No special requirements.
Storage: No special requirements.
Section VIII – Exposure control – personal protection
Exposure Guidelines: None established.
Engineering Controls: None needed when used as intended in Tektronix printers.
Eye Protection: None needed.
Skin Protection: None should be needed.
Respiratory Protection: None needed.
9-6
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information and Specifications
9
Section IX – Physical and chemical properties
Appearance: Colorless liquid.
Odor: Slight.
Solubility: Not water soluble.
Section X – Stability and reactivity
Stability: Stable. Traces of formaldehyde may form if heated in air above 300° F (149° C). (Normal operating
temperature in this printer is 50° to 60°C).
Incompatibility With Other Materials: Oxidizing compounds can cause a reaction.
Hazardous Polymerization: Will not occur.
Section XI – Toxicological information
Acute oral LD50: Greater than 50 ml/Kg (G.P.).
Eye Irritation: Very mild irritant, normal after 24 to 48 hours.
Skin: Not a skin irritant.
Mutagenicity: Negative in activation and non-activation systems.
Section XII – Ecological information
No known impact.
Section XIII – Disposal considerations
Observe all Federal, State, and Local regulations. See section XV.
Section XIV – Transport information
D.O.T.: Not regulated.
Section XV – Regulatory information
EPCRA section 313 Reportable Ingredients: None.
California Prop. 65: Not listed.
Canadian WHMIS: Not considered a hazardous chemical.
TSCA: This product is listed in the Toxic Substances Control Act inventory as verified by our suppliers.
OSHA: Not considered a hazardous material as defined by 29CFR1910.1200 Hazard Communication.
Section XVI – Other information
Original preparation date: October 21, 1994 R.C.
Tektronix, Inc.
P.O. Box 500
Chemical Documentation
Mail stop 55-769
Beaverton, Oregon 97077
Printer information: 1-800-835-6100
MSDS information: (503) 627-7255
User Manual
9-7
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Regulatory Information and Specifications
Specifications
Printer tilt
Place the printer on a level surface with no more than 3° tilt in any direction.
Equivalent to raising one corner of the printer approximately 2 cm
(0.75 inches.)
Caution
Tilting the printer more than 3° causes drum fluid to leak from
the maintenance tray resulting in damage to your printer not
covered by the printer’s warranty.
Temperature
Operating:
Nonoperating:
Storage:
10° C to 35° C (50° F to 95° F)
–30° C to +60° C (–22° F to 140° F)
–30° C to +60° C (–22° F to 140° F)
Humidity
Operating:
Nonoperating:
10% to 80% Relative Humidity, noncondensing
10% to 95% Relative Humidity, noncondensing
Altitude
Operating:
Nonoperating:
0 to 2,400 meters (0 to 8,000 feet)
0 to 15,000 meters (0 to 50,000 feet)
Primary voltage ranges (switch-selectable)
87 – 128 VAC, 115 VAC nominal
174 – 250 VAC, 220 VAC nominal
Frequency range
48 to 66 Hz
AC input ratings
115 VAC, 10 Amps
220 VAC, 5 Amps
Print quality and speed*
Fast Color mode color print on paper: 6 pages per minute
Standard mode color print on paper: 4 pages per minute
Standard mode color print on transparency: 2 pages per minute
Enhanced mode 600 x 300 dpi color print on paper: 2 pages per minute
(optionally available)
* Left and right margins set to 0.3 in. (7.4 mm) or larger.
9-8
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information and Specifications
9
Power consumption
Operating power consumption: 140 to 480 Watts
Meets Energy Star power conservation requirements
with the Energy Star timeout set to one hour.
Printer Dimensions
Height: 33 cm (13 in.)
Depth: 50.2 cm (19.75 in.)
Width: 40 cm (15.75 in.)
Weight: 32 kg (70 lbs.)
Printer Clearances
Top:
45.7 cm (18 in.)
Sides: 10.2 cm (4 in.)
Front:
no restrictions
Rear: 10.2 cm (4 in.)
Bottom: no restrictions
Lower Paper Tray Assembly Dimensions
Height: 13.0 cm (5.13 in.)
Depth: 50.8 cm (20 in.)
Weight: 7 kg (15.5 lbs.)
Width: 40 cm (15.75 in.)
Safety and emissions
■
Listed: UL 1950 Information Technology Equipment.
■
Certified: CSA Standard C22.2 No. 950–M 89, Safety of
Information Technology Equipment, Including Electrical Business
Equipment.
■
■
TÜV licensed: EN60950.
Class B compliant computing device pursuant to sub-part J of Part
15 of FCC rules.
■
Conforms to EC EN55022;1986, EN60555-2;1986, EN50082-1;1992.
User Manual
9-9
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Regulatory Information and Specifications
9-10
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
C
cables
accessories
optional 2-4
ordering 8-3
ordering 8-1, 8-2
standard 2-2
Cancelbutton 7-2
Check Print
Acrobat Reader
installing on a PC 2-50
adapters
resetting the timeout 4-14
Chooser 6-7, 6-8
CIE colors 4-3
ordering 8-3
Cleanbutton 2-27, 5-9, 5-14, 5-18, 5-32
cleaning
adding ink 5-1, 5-2
adding memory 8-7
adjusting printed colors 4-3
Adobe IntelliSelect 3-40
Adobe Photoshop 3-24
plug-in 2-52
Adobe PostScript driver 3-9
Adobe Type Manager (ATM) 3-44
alcohol
alcohol 5-12
cleaning
page 2-26, 5-9, 5-14, 5-18, 6-
14
cleaning tray 5-10, 5-31, 5-32
duplex print cleanup 6-14
ink smears 5-13, 5-17, 5-19, 5-25
instructions printout 5-31
internal paper path 5-17
jams at upper tray 5-13
jams inside front cover 5-13
kit contents 5-10, 5-11
light stripes or missing
colors 5-9, 5-13, 5-14
lower pick rollers 5-35
lower tray jams 5-35
maintenance tray used by printer 5-7
media jams 5-9, 5-30, 6-14
order number for kit 5-12
overview 5-9
pre-soaked cloth 5-12
purity 5-12
applications
color adjusting 4-9
QuickDraw GX 2-57
ASCII files, printing 3-20
asterisk (default setting) 2-28
ATM software 3-42
installing on a PC 2-51
automated fax systems (HAL/ EuroHAL) 6-2
automated information system
(HAL) 3-22, 3-23, 3-41, 6-33
automatic language selection 3-40
AutoSelect button 3-34
paper feed problems 5-19
paper pick pad 5-33
paper pick rollers 5-30
precautions 5-12, 5-20
pre-soaked cloth 5-12
printdrum 5-27
B
banding on prints, cleaning 5-14
blue color adjust 4-6
buttons, front panel 2-27, 7-2
printhead 5-14
solutions identified 5-13
supplies, illustrated 5-10
swab 5-12
User Manual
Index-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning Page Source
cleaning page 5-9, 6-14
selecting the cleaning page source 7-9
CMYK Sampler, Macintosh utility file 4-10
CMYK.PS, PC utility file 4-10
Collate option
configuration page
enabling and disabling 7-6
printing 2-29
from the front panel 7-7
Confirmbutton 7-2
Connect dialog box 6-9
connections
using with the Check Print option 4-13
color
before powering on 2-20
parallel cable 2-23
parallel port 2-23
adjusting or correcting 4-3
how to use 4-2
problems with 6-32
color charts
PhaserShare network ports 2-22
SCSI port 2-24
correcting printed colors 4-3
CMYK 4-10
HSB 4-10
RGB 4-10
color correction 4-10
modes 3-28
D
demonstration pages
printing 2-29
color corrections
desktop printers, QuickDraw GX
creating 2-57
printing from 3-18
diskettes
Commercial Press 4-7
Euroscale Press 4-7
from an application 4-9
Macintosh printer driver 3-16
Monochrome 4-8
no corrections 4-6
Simulate Display 4-7
SWOP Press 4-7
drivers 2-1
utilities 2-1
display colors, simulating 4-7
DOS, copy command 3-46
DOS, printing from 3-13
downloading fonts 3-43
from Macintosh 3-43
from PC 3-43
use printer setting 4-8
Vivid Color (blue) 4-6
ColorStix ink sticks
adding 5-1, 5-2
order numbers 5-3
precautions 5-3
drivers
installing
Macintosh 2-59
QuickDraw GX 2-57
using
Commercial Press color correction
description 4-7
Macintosh printer driver 3-16
communication ports 2-40
CONFIG.PS, PC utility file 6-31
Macintosh 3-17, 3-19
Windows 3.1 3-9
Windows 95 3-4, 3-6, 3-9
Index-2
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
drum fluid
cleaning 5-25, 5-27
precaution 5-8, 5-20
fonts 1-1, 3-43
Adobe Type 1 and Type 3 1-2, 3-41
downloading 3-43
listed on startup page 8-7
Macintosh screen fonts 3-44
memory upgrade required 8-7
order number 8-7
PCL5 fonts 3-41
resident typefaces 3-41
standard 3-41
E
EasyCopy/ X, workstation software 3-22
emissions 9-9
emptying the waste tray 5-4
enabling and disabling the configuration
page 7-6
enabling and disabling the startup page 7-6
Energy Star
TrueType 1-2, 3-41, 3-43
upgrade fonts 3-41
FONTS.PS, PC utility file 3-46
front panel
power requirements 9-9
standby mode description 7-8
Enhanced (600 x 300) print mode 3-27
error codes and messages 6-3
error handlers, PostScript 6-27
Error indicator 2-27
button descriptions 2-27, 7-2
Check Print 4-14
display line description 7-3
displays 2-27
indicator lights 2-27, 7-1
language change 2-28
locking and unlocking 7-4
messages and error codes 6-3
operation 7-1
errors, PostScript 6-26
Ethernet
network problems 6-8
PhaserShare card and protocols 2-21
EuroHAL, automated fax system 6-1, 6-2
Euroscale Press color correction
description 4-7
Macintosh printer driver 3-16
Exit button 7-2
front panel menu
accessing with Menu button 2-27
limited menu selections 2-27
selecting a language 2-28
front panel menu map 7-5
ftp server 6-1
extended features, printer 3-27, 8-4
F
G
Fast Color print mode 3-27
features
getting help 6-1
gray scale, printing in 4-8
GX printer driver, see QuickDraw GX printer
driver
selecting in a Windows driver 3-3
font sampler
printing
from a Macintosh 3-45
from a PC 3-46
Font Sampler, Macintosh utility file 3-45
User Manual
Index-3
Download from Www.Somanuals.com. All Manuals Search And Download.
installers
using
H
HAL — Highly Automated
Macintosh 2-53
installing
Lower Paper Tray Assembly 2-7
Library 3-22, 3-23, 3-41, 6-33
HAL, automated fax system 6-2
telephone number and instructions 6-2
halftone screens, printer 6-34
handling media 3-32
printer setup 2-1
screen fonts 3-44
inventory, printer 2-2
isopropyl alcohol 5-12
hard disk, SCSI
selecting 2-24
Help pages
J
printing 2-29, 7-6
protected menu mode 7-4
types available 7-6
job pipelining 1-1
HP-GL 1-2, 3-40
HSB Sampler, Macintosh utility file 4-10
HSB.PS, PC utility file 4-10
L
label stock supported 3-30
language modes
checking 6-25
languages
I
image area 1-1, 3-31
image problems
default 3-40
front panel 2-28
symptoms and solutions 6-6
Image Smoothing 4-16
indicators
printer 1-2
LaserWriter 8.x driver, using 2-55, 2-59
leave printer on 2-27
letterhead
Power 2-27
information access
PhaserLink 1-3
ink
adding 5-1, 5-2
adding at setup 2-13
ColorStix ink sticks 1-3
handling waste ink 5-6
loading precautions 5-3
ink smears
loading 3-35
manual feed printing 3-39
running a test sheet 3-35
light or missing stripes
cleaning 5-14
identifying 5-14
line voltage selection 5-38
LocalTalk/ serial connection 2-22
locking front panel menus 7-4
locking the transit restraint 5-37
Lower Paper Tray Assembly
fill label 2-17
cleaning 5-17, 5-19, 5-25
identifying 5-17, 5-19, 5-25
preventing 6-16
installing tray 2-7
loading tray 2-17
Index-4
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Lower Paper Tray Assembly, cont.
paper only 2-14, 3-33
paper tray order numbers 8-5
paper weight 3-30
LPT port problems 6-23
media 3-29
handling tips 3-32
image area 3-31
Media Sampler kit 2-15
size 3-30
media jam
cleaning 5-9
locating 6-15
prevention guidelines 6-14
M
Macintosh
screen fonts, install 3-44
Macintosh printer driver
Page Setup dialog box 3-16
Print dialog box 3-16
selecting printer in Chooser 2-54
TekColor Options dialog box 3-16
Macintosh utility files
CMYK Sampler 4-10
Font Sampler 3-45
HSB Sampler 4-10
RGB Sampler 4-10
Setscreen Patch 6-34
Tek Error Handler 6-27
maintenance
media trays
advantages of multiple trays 8-6
capacity 2-14
fill label 2-16
installing 2-17
jam cleaning 5-30
loading 2-15
lower tray jams 5-35
order numbers 8-6
paper weight supported 2-15
selecting 2-14
selecting a default media tray 3-34
types 3-33
types of media 2-14
using two 2-14
cleaning page 5-9
cleaning the printer 5-9
maintenance tray
memory
advantages of upgrading 8-7
image area 1-1
order numbers 8-7
installing 2-11
jams requiring re-latch 5-30
location 2-11
order number 5-7
replacing 5-7
Menu button 2-27
menu map 7-5
overview 2-29
Microsoft Windows NT PostScript printer
driver, updating 3-13
when to reorder 2-11
maintenance, schedule 5-1
manual feed
mispick, paper feed 5-30, 5-35
missing jets, cleaning 5-14
Monochrome color correction
description 4-8
letterhead 3-39
paper jam 3-39
paper weight 3-30
printing 3-38
Macintosh printer driver 3-16
transparency 3-39
manual feed media
Macintosh printer driver 3-16
User Manual
Index-5
Download from Www.Somanuals.com. All Manuals Search And Download.
moving the printer 5-38
P
locking the transit restraint 5-37
precautions 5-36
removing the maintenance tray 5-36
packing material
removing 2-7
Page Setup dialog box
Macintosh printer driver 3-16
PANTONE
Colors, printing 6-33
paper 3-29
N
network connections
order numbers 8-8
PhaserShare cards 2-20
rear panel ports 2-21
network printing 6-39
NFS, see PC/ NFS
No Color Correction
description 4-6
acceptable types 3-29
cleaning lower pick rollers 5-35
cleaning pick rollers 5-30
duplex warning 3-29
feed roller cleaning 5-21
image area 3-31
No color correction
letterhead, loading 3-35
manual feed 3-30
recycling 3-29
size 3-30
weight 3-30
Macintosh printer driver 3-16
noises during warm-up 2-26
NT, Windows NT PostScript printer driver,
updating 3-13
paper jam
cleaning 5-9
locating 6-15
O
oil (printer drum fluid)
cleaning 5-25, 5-27
precaution 5-5, 5-8, 5-20
on/ off switch 2-27
online services 6-1
ordering
manual feed 3-39
symptoms and solutions 6-6
two prints clear printer 6-14
paper pick roller cleaning 5-30, 5-35
paper tray
order numbers 8-6
using for transparencies 3-33
paper weight 3-30
parallel cable 2-23, 8-3
parallel port
cables and adapters 8-3
maintenance tray 2-11
part numbers and descriptions 8-3
supplies 8-2
cable 2-23
connecting 2-23
default language 3-40
Index-6
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
PC utility files
CMYK.PS 4-10
PostScript Header
Windows 3.1 driver 3-10, 6-19
Windows 95 driver 3-5, 3-7
printing files 3-40
CONFIG.PS 6-31
FONTS.PS 3-46
HSB.PS 4-10
timeout 6-31
RGB.PS 4-10
Power indicator 2-27
power switch location 2-25
PowerPoint users, image quality solution 6-7
print a truer blue 4-6
Printbutton 7-2
Print dialog box
Macintosh printer driver 3-16
print features
TEKEHAND.PS 6-27
PC/ NFS 6-23, 6-40
PCL5 1-2, 3-40, 3-43
Phaser 350 (LaserWriter 7.1.2-based) printer
driver, see Macintosh printer driver
Phaser 350 extended features 3-27
Phaser Copystation
capabilities 8-9
order number 8-9
SCSI port 2-21
selecting color corrections 3-25
selecting print quality modes 3-25
speed 3-27
PhaserLink 3-25
PhaserLink software 1-3
PhaserPrint 8-9
print quality
600 x 300 dpi 8-7
Enhanced (600 x 300 dpi) 3-27
Macintosh printer driver 3-16
memory upgrade required 8-7
selecting print quality modes 3-25
Standard 3-27
order number 8-9
Photoshop plug-in 2-52
software for workstations 6-20
PhaserShare cards
advantages of networking 8-8
configuring 2-21
connecting 2-22
order numbers 8-8
upgrade kits 2-22
print speed
selecting print quality modes 3-27
print speed, improving 6-18
printdrum
cleaning 5-27
printer
halftone screens 6-34
Printer Command Language 1-2
printer control
PhaserSym
capabilities 8-10
order number 8-10
PhaserSym software for workstations 3-22
ports, see communication ports
PostScript
PhaserLink 1-3
selecting features 3-25
error handlers 6-27
errors, general 6-26
User Manual
Index-7
Download from Www.Somanuals.com. All Manuals Search And Download.
printer drivers
generic 3-34
installing
Q
quick reference
selecting features, Windows 3-3
Macintosh 2-59
QuickDraw GX
QuickDraw GX 2-57
printing transparencies 3-37
using
Tektronix printer driver 2-57
QuickDraw GX printer driver
desktop printers
Macintosh 3-17, 3-19
Windows 3.1 3-9
creating 2-57
installing 2-57
printing from
Windows 95 3-4, 3-6, 3-9
printer languages
default 3-40
printer quality
GX-aware applications 3-18
non-GX aware applications 3-18
Printing menu
Fast Color 3-27
Start Print Queue command 3-18
Stop Print Queue command 3-18
selecting printer in Chooser 2-57
when to use 2-57
printer standby modes 7-8
PRINTER.INF, updating Windows NT
driver 3-13
printing
languages 3-40
manual feed 3-38
R
registration card 2-7
repacking your printer 5-36
repair
test page 5-15
transparencies 3-36
two pages after jam 6-14
printing color sampler charts 4-10
Printing menu, QuickDraw GX printer driver
Start Print Queue command 3-18
Stop Print Queue command 3-18
printing on a network 6-39
printing press color corrections 4-7
printing problems 6-21
problems and solutions
image quality 6-6
shipping box 2-7
replacing the maintenance tray 5-7
resident typefaces, PostScript, PCL5 3-41
RGB Sampler, Macintosh utility file 4-10
RGB.PS, PC utility file 4-10
media feeding and jamming 6-6
network problems 6-8
operational hints 6-12
printing and installation 6-8
protected menus 7-4
Index-8
Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
S
T
safety and emissions 9-9
screen fonts
Tek Error Handler, using
from a Macintosh 6-27
from a PC 6-27
installing 3-44
Macintosh 3-44
TekColor
SCSI hard disk
options 3-28
ordering 8-10
selecting 2-24
SCSI port
TEKEHAND.PS, PC utility file 6-27
Tektronix Bulletin Board Service (BBS) 2-61
Testbutton 5-15
connecting external font disk 2-24
connecting Phaser Copystation 2-24
selecting a default media tray 3-34
selecting a front panel language 2-28
selecting a print-quality mode 3-27
serial interface
timeouts
Windows 95 driver 3-4, 3-6, 3-9
Windows printer driver 2-41
Token Ring
PhaserShare card and protocols 2-21
touring the printer 2-6
transit restraint
connection 2-22
Setscreen Patch, using
from a Macintosh 6-34
from a PC 6-35
simple color conversions, CMYK and RGB 4-8
Simulate Display color correction
description 4-7
location 2-10
locking before moving printer 5-37
unlocking before use 2-10
Transmission Retry,
Windows 2-41, 3-4, 3-6, 3-9
transparency
Macintosh printer driver 3-16
solid-ink jet 1-1
acceptable types 3-29, 3-36
handling tips 3-32
specifications 9-8
manual feed printing 3-39
maximum capacity 3-36
order numbers 8-6
printing from generic driver 3-34
printing from Tektronix driver 3-37
printing instructions 3-36
size 3-30
speed, print, improving 6-18
Standard print mode 3-27
standby modes 7-8
startup page
after warmup 2-27
enabling and disabling 7-6
non-fatal error 6-11
tray types 8-6
printing 2-29
trays, paper, selecting
Macintosh printer driver 3-16
stripes in prints, cleaning 5-14
supplies, ordering 8-2
SWOP Press color correction
description 4-7
Macintosh printer driver 3-16
User Manual
Index-9
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting
Windows 3.1 driver
Features tab 3-9
image quality problems 6-6
media feeding or jamming problems 6-6
network problems 6-8
operational hints 6-12
TrueType fonts 3-43
fonts 3-45
Job Control tab 3-10, 6-19
Paper tab 3-9
PostScript header 3-10, 6-19
PostScript tab 3-9, 6-19
problems with printer fonts 6-38
problems with setting page sizes 6-36
timeouts 6-29
turn on printer 2-27
two prints after jam 6-14
U
using 3-9, 6-19
using fonts 3-45
UNIX workstations
installing printer software 2-61
Use Printer Setting color correction
description 4-8
Windows 95 driver
adding
printers 2-34, 2-37, 2-43, 2-50,
2-51
Macintosh printer driver 3-16
used ink 5-4, 5-7
using color 4-2, 4-4
using EuroHAL 6-1
utilities
CD-ROM 2-1
diskettes 2-1
utility files 2-61
Details tab 3-4, 3-6
Device Options tab 3-5, 3-6
Graphics tab 3-4, 3-6
Paper tab 3-4, 3-6
PostScript Header 3-5, 3-7
PostScript tab 3-5, 3-7
problems with printer fonts 6-38
timeouts 3-4, 3-6, 3-9, 6-29
using 3-4, 3-6, 3-9
Windows printer driver
configuring 2-40
V
Vivid Color color correction
description 4-6
Macintosh printer driver 3-16
timeouts 2-41
workstation software
EasyCopy/ X 3-22
W
warming up 2-27, 5-18, 7-8
waste tray
PhaserPrint 3-21
PhaserSym 3-22
workstations
PhaserPrint software 8-9
World Wide Web
emptying 5-4
fluid precautions 5-5
weight, paper 3-30
WIN.INI file, editing 3-45
description 1-3
Index-10 Phaser 350 Color Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
|
TDK Network Card HHM Series HHM1791A1 User Manual
TekNmotion Video Game Headset Pulsar SX User Manual
Tiger Lawn Mower RBF 19C User Manual
Toshiba Blu ray Player BDX5400KC User Manual
TP Link Network Router TD W8970 TD W8970B User Manual
Uniden Radar Detector LRD 766 User Manual
Uniflame Gas Grill GBT926W1 C User Manual
Vizio Projection Television VA320M User Manual
VuPoint Solutions Digital Camera DC WPST591 VP User Manual
Weber Gas Grill 56208 User Manual