The industry’s most
advanced fully integrated
laser / radar detectors
with a digital compass
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Welcome to the world of sophisticated, early warning laser/radar
detection. You have purchased one of the most advanced laser/radar
detectors available. The LRD 767 / LRD 777 is a completely integrated
laser/radar detector. It responds to the X, K, and Ka-SuperWideband
radar guns in use today and also provides 360 detection of the latest
speed monitoring system — the laser gun. The built-in Safety
Warning System (SWS™) is capable of detecting a hazardous
warning signal transmitted on the K-band.
The LRD 767 / LRD 777 provides distinct visual and audio alerts to
warn you of the presence of X, K, and Ka-SuperWideband radar
signals as well as IR laser signals and Safety Warning System. You can
drive with confidence when you bring along the LRD 767 / LRD 777.
The LRD 767 / LRD 777 employs Super Stalker Technology (SST), a
state-of-the-art electronic system designed to make this radar
detector invisible to all current VG-2 radar detector detectors.
The LRD 767/LRD 777 will also warn you of VG-2 use.
The LRD 767 / LRD 777 includes electromagnetic compass
sensors to its circuitry and enables you to stay on course with this
digital navigator.
We are certain that you will enjoy the LRD 767 / LRD 777, and to
ensure that you get the most from its features, please read this
Reference Guide carefully before installing and operating the unit.
FEATURE HIGHLIGHTS
•
•
•
•
•
•
•
•
•
•
•
360 Laser Detection
Safety Warning System™
All Band Coverage
7 Alarm Tones
Super Wideband
VG-2 Undetectable
K/Ka Priority
Pulse Detection
VG-2 Alert
Electronic Compass
Text Readout
•
•
•
•
•
•
•
•
•
Signal Strength Meter
Warning Lights
Visual Only Mode
Auto Mute Mode
Audio Only Mode
Self Test
Memory Retention Feature
City and Highway Modes
External Speaker Jack
(LRD777 Only)
Voice Announce Alert
(LRD777 Only)
•
Download from Www.Somanuals.com. All Manuals Search And Download.
2
INCLUDED WITH YOUR RADAR DETECTOR
The industry’s most
advanced fully integrated
To get the most from
your laser/radar
laser
with
/
radar detectors
digital compass
a
detector, please read
this Reference
Guide thoroughly.
Reference Guide
Windshield Clip
njdfjnjnjfnjfjn
jnkjnjksnkjsnfj
dfks
njdfjnjnjfnjfjn
jnkjnjksnkjsnfj
dfksf
k
m\
njdfjn
jnjfnjfjn
s
k
jnkjnjksnkjsnfj
dfksfmkm
njdfjnjnjfnjfjn
ksfmfkkkmmkmfmlf
oioionksnkln
mmkmkkl
m
smsm\
mjnkjnjksnkjsnfj
s
d
fk
sfmkm
kk
kfmkmkmlf
s
ionksnkln
mskfkkkommfmsmsm\
mmkm
kl
skdmkmkm
skdmkmkm
m
i
o
k
sdmkmfmmmk
mdmklkkkml
mmkkllmmk
n
njdfjnjnjfnjfjn
m\
jnkjnjksnkjsnfj
jn
dmmkkllmmk
knjdfjnjnjfnjfjn
m
dmklkkkml
sdmkmfmmmk
s
dfkfmkm
kfmkmkmlf
sfkkmmfmsmsm\
jnkjnjksnkjsnfj
s
dfksfmkm
kmkomiokimonksnkln
kkl
k
kfmkmkmlf
msfkkmmfmsmsm\
skdmkmkm
oioionksnkln
kk
smmkmkkl
sdmkmfmmmk
mdmklkkkml
mmkkllmmk
s
skdmkmkm
mkmfm
mmk
mmdmklkkkml
mmkkllmmk
s
d
m
Fuse
Printed Material
WARNING
If any of these items
are missing or damaged,
contact your dealer
immediately. Be sure
to complete and mail
the product registration
card. Included with
your radar detector.
Coiled Cigarette Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
3
SPEED DETECTION SYSTEMS
A speed detection device (often called a radar gun) sends out
either a microwave signal or beam of light. When this signal
reaches its target, part of the signal is reflected or bounced back
toward the emitting gun. The time required for the signal to leave
the gun, bounce off an object, and return is used to determine a
vehicle’s distance and speed.
▼
RADAR
Radar (Radio Detection and Ranging) is a microwave system for
detecting the speed of moving objects by reflected pulses of high
frequency radio waves. There are three radar bands
(microwave frequencies): X band (10.49 to 10.56GHz), K band
(24.04 to 24.26GHz), and the “superwide” Ka band (33.4 GHz to
36 GHz).
The X band was the first used for traffic, followed by the K band
which is harder to detect (most instant-on radar is K band). The
Ka band was introduced in 1987, and widened to Ka SuperWideband
in 1990 by the FCC. The LRD 767/LRD 777 monitors all current
radar bands including the entire Ka SuperWideband.
The radar beam is cone shaped — the narrower the beam, the
greater the resolution. A moving vehicle reflects radar signals
back towards the radar gun. The LRD 767/LRD 777can detect the
signals emitted by radar guns, and it will sound an audio alarm
and flash a warning indicator. For continuously transmitting
radar, use the LRD 767/LRD 777 to get accurate detection from a
safe distance. Weak signals cause the audio and visual alarms to
sound intermittently, but as the signal gets stronger (the closer
you get to the radar gun), both alarms increase in intensity.
Instant-on transmitters fire a short radar pulse beam at a vehicle
and instantly read its speed. When detected at a distance, you will
hear a few beeps and see the strength meter begin to light.
Instant-On radar signals are the most difficult to detect at a safe
distance because they are transmitted only when directed at you
or at a vehicle directly ahead of you.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
▼
LASER
ght
The Laser Speed Detection System, also called LIDAR (for Li
Detection and R
anging), uses a laser gun that emits infrared light
pulses just outside the spectrum of visible light. Each reflected
pulse measures the speed of the object coming toward or going
away from the laser gun.
Unlike radar, the laser gun emits a very narrow beam of light, so
it can pinpoint a speeding car within traffic. The infrared beam
spreads out, but slowly and over a longer distance than a
radar signal.
To be safe, do not
ignore any warnings.
Although there are
other types of radar
signals that may
The laser gun can acquire a speed reading as quickly as 0.3
seconds, sometimes less. However, since it isn’t easy to accurately
aim at and hit a moving target, an operator often moves the laser
gun in several directions to get a reading. So laser signals
are emitted continuously for a few seconds for each
speed measurement.
cause interference,
when the
LRD 767/LRD 777
detects a signal, be
on the alert. It is
important to exercise
caution at all times.
The LRD 767/LRD 777 can detect these light pulses from as far
away as 1.5 miles, which is about four times the effective
range of a laser gun (2,000 feet), and about ten times its
average operating range (500-800 feet).
Download from Www.Somanuals.com. All Manuals Search And Download.
5
CONTROLS AND FUNCTIONS
1.
Clip Release — Press the clip release button to remove the
LRD 767/LRD 777 from the windshield mounting clip.
2.
3.
Rear and Side Laser Detector Lense — For rear and side
detection of laser signals.
Press thecity button to help reduce X-band false
alarms while driving in the city. When you turn
on the City Mode, the City indicator turns on.
While driving on highways, turn off the City
Mode for long-range detection.
(LRD 777 will give a voice confirmation.)
4.
5.
Press theaudio button to activate the Audio Alert
Only operation. All the LEDs dim, and the signal
strength meter is disabled.
(LRD 777 will give a voice confirmation.)
Press themute button to activate the Auto Mute
feature, which produces a full alert level when a
signal is first received, then automatically
reduces to chirps for the rest of the warning.
(LRD 777 will give a voice confirmation.)
6.
Speaker — Sounds audio alert. There are seven different audio
alert tones to distinguish each type of signal received. When
you become familiar with all the distinct alert tones, you can
operate the LRD 767/LRD 777 just by listening, devoting
your full attention to the traffic in front of you.
7.
DC 12V Power Input — Connect the DC power cord here.
8.
On-Off/Volume Control — Turns the power on and adjusts
the Audio Alert volume.
9.
Display Panel —LEDs display laser/radar alerts, signal strength,
operation mode, Safety Warning System (SWS) messages,
and eight (8) cardinal directions.
NOTE: Foldout the
back cover of this
reference guide to
Back
Cover
erence
Guide
Ref
refer to the “Controls
& Functions” page.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DISPLAY PANEL
The display panel indicates the driving direction and each mode
of the operational conditions when no signal is engaged.
At city mode :
C T Y
H W Y
N E
N E
At highway mode :
Every time you turn
on the LRD 767/LRD
777, a self test is
performed for all visual
and audio alerts. You
will hear, in-order,
four distinct tones for
the X, K, and
Ka-SuperWideband
radar bands, as well
as for laser, laser L2,
VG-2 and SWS.
At audio-only mode :
(dim & dimmer)
or
or
C T Y
H W Y
d
d
N E
N E
At audio-only mode :
(dark)
C T Y
H W Y
a
a
N E
N E
At display-on mode :
At mute-on mode :
At mute-off mode :
or
or
or
C T Y
H W Y
N E
N E
C T Y m
H W Y m
N E
N E
C T Y
H W Y
N E
N E
NOTE: Foldout the
back cover of this
reference guide to
refer to the “Controls
& Functions” page.
Back
Cover
erence
Guide
Ref
Download from Www.Somanuals.com. All Manuals Search And Download.
7
INSTALLATION
The LRD 767/LRD777 uses a highly sensitive horn-type antenna
and IR laser sensor to receive laser/radar signals. Its sensitivity
and range depend on the method of installation and the direction
of the antenna/sensor in relation to the signal source. The
inherent nature of radar waves makes them reflect off metallic
surfaces. This is why these waves are so useful for measuring the
speed of a vehicle. The IR laser light may reflect only from shiny
surfaces. Both radar waves and IR laser light will, however, pass
through plastic or glass.
Before you decide where to put your radar detector, please keep in
mind these two important factors:
•
For safety, do not mount the LRD 767/LRD 777 in a location
where it will obstruct your driving vision.
•
Most vehicles have the top part of the windshield tinted.
Mounting the LRD 767/LRD 777 behind tinted or mirrored
glass may reduce the effectiveness of laser detection by
reducing the amount of laser light received by the dectector.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
HELPFUL TIPS
The antenna and the forward looking sensor are located
behind the rear panel of the unit, (and the rear- and
side-looking sensors are located on top of the unit), directly
behind the mode selection keys. The antenna and sensors
should not be obstructed by metal or metallic surfaces
and should be pointed at the horizon for accurate
long-range detection.
•
Do not mount the unit behind the windshield wiper blades,
radio antenna, tinted glass area, or mirrored glass. Be sure
the unit is free from obstruction by seat backs, rear view
mirror, sun visors, or the ceiling of the automobile.
Do not mount the unit in front of the heater or
defroster vents.
Do not leave the unit in direct sunlight or in the glove
compartment of a closed car for long periods of time, as
extreme changes in temperature may cause internal damage.
Also, removing the unit from the windshield makes you less
susceptible to break-in and theft.
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
9
ADJUSTING THE WINDSHIELD MOUNTING CLIP
1)
2)
The metal portion of the bracket locks into the plastic
portion at two different positions. These positions can be used
for vehicles with two different vertical angles of their
windshields. The back position can be used for vehicles with
windshields that are slanted back.
For optimum laser detection, gently bend the angled portion
of the windshield mounting bracket so that the LRD 767/
LRD 777 is parallel to the road surface. Be sure the
LRD 767/LRD 777 is mounted so it is free of obstructions
from seat backs, rear view mirror, sun visors, or the ceiling
of the automobile. There must be a clear 360 line of sight
to the outside of the vehicle.
To mount the LRD 767/LRD 777:
1)
Press the button on top of the radar and insert the
windshield clip into the LRD 767/LRD 777. The metal
portion of the bracket locks in to the plastic portion.
2)
Place the bracket and the LRD 767/LRD 777 in the proper
location on the windshield of your vehicle, and press the
suction cups firmly against the windshield.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
CONNECTING THE POWER
The LRD 767/LRD 777 is designed to operate on most 12 VDC
negative ground vehicle electrical systems. The power cord
provided with the unit has a cigarette lighter socket plug at
one end and a small connector at the other.
Use only a Uniden
supplied power cord
or its replacement.
1)
Insert the small connector into the jack on the side of
the unit.
2)
Insert the other end into the cigarette lighter socket of
your vehicle.
When installing the power cord, make sure that:
•
•
The socket is clean to allow proper contact.
The power cord does not block the antenna area on the back
of the unit
.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
REPLACING THE FUSE
The cigarette lighter plug contains a 1-ampere fuse to protect it
from power surges.
1.
To replace the fuse, unscrew the top of the plug.
2
Remove the fuse and replace it with the same type.
3.
To replace the top, push in the two metal contacts and twist
into place.
Press In
Download from Www.Somanuals.com. All Manuals Search And Download.
12
OPERATION
You are now ready to enjoy the convenience and security of your
LRD 767/LRD 777. Please read this section of the Reference Guide
carefully to familiarize yourself with the basic operation of this
unit.
POWER ON
DEMONSTRATION
VOLUME CONTROL
Adjust thevolume control to a comfortable alarm tone level for
your vehicle. The volume level does not have any effect on the
unit’s sensitivity. It is best to adjust the audible alarm during the
self-test.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
MEMORY RETENTION FEATURE
The Memory Retention Feature retains the LRD 767/LRD 777’s
operational settings in memory for at least 2 days without power.
When you turn on the LRD 767/LRD 777, it will be in the same
mode as when you turned it off.
FULL WARNING
When the LRD 767/LRD 777 detects a radar, laser, VG-2 or safety
warning signal, it emits a distinct warning tone and the
corresponding visual messages will light. The blink rate of the LEDs
increases and the signal strength meter LEDs light successively as
the signal source comes closer.
AUDIO ALERT ONLY OPERATION
Press theaudio button for Audio Alert Only operation.
When Audio Alert Only is selected, the visual alert and signal
strength meter are disabled. In this mode, the display panel will
dim. There are four levels for the display panel brightness control.
You can control the brightness by pressing the audio button repeatedly.
Press the audio button again for the Full Alert (audio and
visual) Mode. Do not set the Volume control at minimum when in
Audio Alert Only because there will be no alert.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
VISUAL ALERT ONLY OPERATION
You can operate the LRD767/LRD777in Visual Alert Only by
setting thevolume control at the minimum position in Full
Alert Mode. At this setting you can barely hear the audio alert
in a quiet environment.
WARNING
To operate with
visual alert only, set
the volume control to
the minimum.
AUTO MUTE OPERATION
Remember though,
if the volume control
is turned down and
Audio Only operation
is selected, the alarm
features are
Press themute button to activate the Auto Mute feature.
completely disabled.
When the Mute is selected, the unit is in Auto Mute Mode.
In this mode you hear the full audio alert when a signal is
first received. The audio alert automatically reduces to a
chirp for the duration of the warning.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
CITY OPERATION
In highly populated areas, you may encounter many devices that
use the same frequencies as radar signals, such as motion
detectors, automatic doors, and intrusion alarms. These devices
may trigger an alert called “falsing.”
To filter most of the weaker signals and get the most accurate
radar signal recognition, press city to turn on the City Mode.
If you use both the
Audio Only Alert and
City modes, you won’t
receive an audio alert
until you are very
close to the radar
source.
In City Mode, the combination of visual and audio alert tones
varies based on the strength of the received signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
SIGNAL STRENGTH METER
The signal strength meter shown in the display panel gives you
instant information about the strength of the signal being detected.
A weak signal causes the first bar to light, but as signal strength
increases, more bars light. All six bars for radar and three bars for
laser light when full signal strength is received. Use this meter to
judge the distance from the signal source.
<Examples>
X
K
K A
L A S E R
NOTE : In Audio only mode the signal strength meter
will not be displayed.
*
SAFETY WARNING SYSTEM OPERATION
The Safety Warning System (SWS™) is a new communication
system that will provide an early warning when a road hazard
exists. The LRD 767/LRD 777 is capable of detecting the SWS
signal broadcast on the K-band by either law enforcement or
local departments of transportation.The corresponding message
from 64 SWS warning messages is scrolled from the right to the
left of the display panel. while an audible alert sounds.
When this alert sounds, you should tune to local radio traffic
reports or prepare to slow down or stop your vehicle because
you could be approaching an accident, bad road conditions
caused by weather, or road crews or construction.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
VOICE ALERT (LRD 777 ONLY)
When each function is activated by pressing a control button, the
LRD 777 gives the following voice messages:
– By the city button : City Mode, Highway Mode
– By the audio button : Display Dim, Display Dimmer, Audio Only,
Display On
– By the mute button : Mute On, Mute On, Mute Off.
NOTE : The second “Mute On” confirms that the voice muting
is activated.
*
When a signal comes in, the LRD 777 gives the corresponding alert
voices : X Band, K Band, Ka Band, Laser Band, UltraLyte Band,
VG2 Band. When a SWS signal comes in, the LRD 777 gives the
corresponding voice message of the 64 warning messages listed in the
following page.
CARE AND MAINTENANCE
The LRD 767/LRD 777 is designed to give you years of trouble-free
service. There are no user-serviceable parts inside, and, except for
the fuse, no maintenance is required. To keep your detector in
new condition, follow these important suggestions:
•
Never leave the LRD 767/LRD 777 on the windshield when
you park your vehicle. The temperature in the vehicle in
summer can reach levels above what is considered to be safe
for this unit
.
•
•
To make you less susceptible to break-in and theft, remove
the unit from your windshield when you leave your vehicle.
Do not expose the unit to moisture. Rain, dew, road splash,
or other liquids can damage the internal components and
reduce sensitivity of the LRD 767/LRD 777.
Download from Www.Somanuals.co1m8. All Manuals Search And Download.
SWS WARNING MESSAGES
Highway Construction
– Work zone ahead
– Road closed ahead / Follow detour
– Bridge closed ahead / Follow detour
– Highway work crews ahead
– Utility work crews ahead
– All traffic follow detour ahead
– All trucks follow detour ahead
– All traff ic exit ahead
– Righ lane closed ahead
– Center lane closed ahead
– Left lane closed ahead
Highway Hazard Zone Advisory
Stationary police vehicle ahead
–Train approaching / at crossing
– Low overpass ahead
– Drawbridge up
– Observe bridge weight limit
– Rock slide area ahead
– School zone ahead
– Road narrows ahead
– Sharp curve ahead
– Pedestrian crossing ahead
– Deer / Moose crossing
– Blind / Deaf child area
– Steep grade ahead / truck use low gear
– Accident ahead
– Poor road surface ahead
– School bus loading / unloading
– No passing zone
– Dangerous intersection ahead
– Stationary emergency vehicle ahead
Download from Www.Somanuals.com. All Manuals Search And Download.
19
SWS WARNING MESSAGES
Weather Related Hazard
– High wind ahead
– Severe weather ahead
– Heavy fog ahead
– High water / Flooding ahead
– ICE on bridge ahead
– ICD on road ahead
– Blowing dust ahead
– Blowing sand ahead
– Blowing snow ahead
– Blowing snow white area ahead
Travel Information Convenience
– Rest area ahead
– Rest area with service ahead
– 24 Hour fuel service ahead
– Inspection station open
– Inspection station closed
– Reduced speed area ahead
– Speed limit enforced
– Hazardous materials exit ahead
– Congestion ahead / Expect delay
– Expect 10 Minute delay
– Expect 20 Minute delay
– Expect 30 Minute delay
– Expect 1 Hour delay
– Traffic alert / tune am radio
– Pay toll ahead
– Trucks exit right
– Trucks exit left
Fast/Slow Moving Vehicles
– Emergency vehicle in transit
– Police in pursuit
– Oversize vehicle in transit
– Slow moving vehicle
(Note : Three messages are reserved for future use.)
Download from Www.Somanuals.com. All Manuals Search And Download.
20
COMPASS CALIBRATION
To have the LRD 767/LRD 777 correctly display the direction which it is
facing you need to follow the calibration instructions stated below.
• Mount your LRD 767/LRD 777 on the windshield firmly.
• Press the audio button for three seconds until it scrolls COMPASS
CALIBRATION on the display panel. (LRD 777 gives you a voice
message saying “start calibration by turning your vehicle twice”.)
• Turn your vehicle slowly and make two circles.
(A trafficless site is recommendable for more accurate calibration.
Also avoid a large metallic object.)
• Press again the audio button to complete the calibration.
NOTE : If the LRD 767/LRD 777 is moved to another vehicle,
it must be recalibrated.
*
Download from Www.Somanuals.com. All Manuals Search And Download.
21
TROUBLESHOOTING
If your LRD 767/LRD 777 does not perform up to expectations, try
the suggestions listed below. If you cannot get satisfactory results,
call the Uniden Customer Service Center at (800) 297-1023, 7:00
a.m. to 7:00 p.m. Central Time, Monday through Friday.
Unit does not operate
(Nothing on the
display panel)
•
•
Check the power cord. Be sure the
connectors are properly installed
Be sure ignition key is ON or in the
accessory position.
.
•
•
•
•
Fuse out. Check and replace.
Check power to lighter socket.
Vehicle electrical problem exists.
Make sure that the volume control is in the
ON position.
•
•
Clean cigarette lighter socket.
Unit fails the self test.
Weak detection.
Call Uniden Customer Service Center,
(800) 297-1023.
•
•
Check angle of unit. Point to the horizon.
Antenna/Sensor is obstructed. Move the
unit clear of any obstruction outside the
windshield, such as a wiper blade.
•
•
Move the unit clear of the window tint.
Inaccurate or
erratic detection:
Loose power cord. Check both connectors.
Power cord is broken. Check and replace.
•
•
Beeps over bumps or
rough road.
Check that the power cord is connected at
both ends.
•
•
Clean cigarette lighter socket.
Beeps at same
location.
Falsing because you have passed a motion
sensor or alarm.
Signal strength meter
registers, but
•
For highway use, make sure the City Mode
is OFF.
no audio.
•
•
Increase the volume.
The unit
bounces against
the windshield.
Reposition the unit so that the bumper
is firmly against the windshield.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
General
Dimensions:
4.6in(L) x 2.8in(W) x 1.1in(H) (LRD767)
4.6in(L) x 2.8in(W) x 1.2in(H) (LRD777)
4.0 oz
Weight:
Power Requirements:
Temperature Range:
12~16V DC, 310mA
Operating: -5 F to 160 F
(-20 C to 70 C)
Storage: -40 F to 185 F
(-40 C to 85C)
360 Laser Detector
Receiver Type:
Sensor Front End:
Detector Type:
Receiver Bandwidth:
Spectral Response:
Alert Hold Time:
Pulse Laser Signal Receiver
Convex Condenser Lens
Pulse Width Discriminator
30 MHz
800 - 1100 nm
3 seconds
Radar Detector
Receiver Type:
Dual Conversion
Superheterodyne
Detector Type:
Scanning Frequency
Discriminator
Antenna Type:
Sensitivity:
Linear Polarized, Self-Contained Antenna
X band = -115 dBm/cm2
K band = -105 dBm/cm2
Ka Super Wide band = -100 dBm/cm2
Frequency of Operation: 10.490 - 10.560 GHz (X band)
24.040 - 24.260 GHz (K band)
33.40 - 36.00 Ghz
(Ka Super Wide band)
Specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
ONE YEAR WARRANTY
Important: Evidence of original purchase is required for
warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the
original retail owner, this Uniden Product to be free from defects in
materials and craftsmanship with only the limitations or exclusions set
out below.
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months after the date of
original retail sale. The warranty is invalid if the Product is (A)
damaged or not maintained as reasonable or necessary, (B) modified,
altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed, (D)
serviced or repaired by someone other than an authorized Uniden
service center for a defect or malfunction covered by this warranty, (E)
used in any conjunction with equipment or parts or as part of any
system not manufactured by Uniden, or (F) installed or programmed
by anyone other than as detailed by the owner’s manual for this
product.
STATEMENT OF REMEDY: In the event that the product does not
conform to this warranty at any time while this warranty is in effect,
warrantor will either, at its option, repair or replace the defective unit
and return it to you without charge for parts, service, or any other cost
(except shipping and handling) incurred by warrantor or its
representatives in connection with the performance of this warranty.
Warrantor, at its option, may replace the unit with a new or
refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE
SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS
IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY
OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE
REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this exclusion or limitation of
incidental or consequential damages so the above limitation or
exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state. This
warranty is void outside the United States of America.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner’s manual you are certain that
the Product is defective, pack the Product carefully (preferably in its
original packaging). The Product should include all parts and
accessories originally packaged with the Product. Include evidence of
original purchase and a note describing the defect that has caused you
to return it. The Product should be shipped freight prepaid, by
traceable means, to warrantor at:
Uniden America Corporation
4700 Amon Carter Blvd
Ft. Worth, TX 76155
1(800)297-1023
7:00a.m. to 7:00p.m. Central
Monday through Friday
©March 2000 Uniden America CorporationAll rights reserved
Printed in Korea LRD 767 / LRD 777
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in Korea
Download from Www.Somanuals.com. All Manuals Search And Download.
|