Tech4o Watch CW1 User Manual

CURRENT TIME MODE  
animated  
bar graph  
Press [ ST/STP ] button to toggle between  
Seconds Display and Date Display  
Time Display  
• 1st row displays: day of week  
• 2nd row displays: hour - minute  
• 3rd row displays: second  
• Animated (1 second) - displays in the  
perimeter bar graph  
Date Display  
• Day of week, hour, minute - display in the 1st and  
2nd rows  
• Numerical day, month - display in the 3rd row  
• Animated (1 second) - displays in the perimeter bar  
graph  
NOTE: Press and Hold [ ST/STP ] to toggle the date  
format between month - day and day - month  
day of week  
Congratulations on the purchase of  
the Tech o NORTHSTAR CW1 or  
current hour,  
minute  
4
CW2 compass watch.  
Please read these instructions and  
save for future reference.  
For best performance, we  
recommend that you:  
• Avoid exposing the watch to  
extreme conditions for extended  
periods  
• Avoid rough use or severe  
impacts  
• Do not open the watch case  
unless certified to repair  
electronic instruments  
NORTHSTAR CW1 & CW2  
current  
second  
Navigation  
time display  
date display  
Arrow  
ST/STP  
[ST/STP]  
LIGHT  
day,  
month  
MODE  
LAP/RESET  
To Set the Currant Time Mode  
• Clean with a soft damp cloth  
• Keep watch away from  
magnetic fields such as mobile phones, speakers and motors  
• Store in a dry place  
Display  
• In the currant time mode, Press and Hold [MODE]  
for 2 seconds until the "seconds" digits flash  
• Press [ST/STP] or [LAP/RESET] to reset the  
seconds to zero; OR Press [MODE] to navigate to  
Current Time Mode  
any setting you wish to change.  
See navigation chart at right  
• When the setting you wish to  
change flashes, Press [ST/STP]  
NORTHSTAR FEATURES  
[ST/STP]  
hold  
[MODE]  
[MODE]  
Current Time Mode  
Time System:  
• Hour - minute - second. AM [A] PM [P]  
• 12 hour or 24 hour format  
• Animated 1 second bar graph  
Calendar System :  
• Month - date - day of week. Auto correction for leap year and day of week  
Compass Mode  
• 16 compass directions- 4 cardinal and 12 ordinal points  
Increase  
[MODE]  
[MODE]  
to raise the value or  
hold [ST/STP]  
minute  
second  
[LAP/RESET] to lower the value.  
Note: If you Press and Hold the  
button, the rate of change is faster  
• When 12 or 24 flashes, Press  
[ST/STP] or [LAP/RESET] to  
toggle between the 12 /24 hour  
format. Press [MODE] to confirm  
NOTE: If NO INPUT for 1 minute  
during setup, the display will  
default to the Current Time Mode  
Increase  
faster  
year  
hour  
[LAP/RESET]  
Decrease  
[MODE]  
[MODE]  
• Magnetic North pointer  
• Backward bearing  
• Compass lock  
• Declination setting and calibration  
date  
month  
hold [LAP/RESET]  
Daily Alarm Mode  
Decrease  
faster  
• Daily alarm  
• Hourly beep  
12/24  
Chronograph Mode  
DAILY ALARM MODE  
• Measurement unit - 1/100 second  
• Measuring capacity - 99 hours. 59 minutes & 59.99 seconds  
Timer Mode  
When the daily alarm is ON, the watch will beep for 20 seconds at the assigned time.  
When the hourly beep is ON, the watch will beep twice every hour on the hour  
Daily Alarm Display  
Daily alarm setting ( hour - minute ) -  
displays in the 2nd row  
• Measurement unit - 1 second  
• Measuring capacity - 99 hours, 59 minutes & 59 seconds  
Pace Mode  
• Pace beat - 40 to 180 beats per minute  
Dual time Mode  
Time System  
Daily Alarm Mode  
Alarm Time  
( hour, minute)  
To Set the Daily Alarm Mode  
• In the Daily Alarm Mode, Press and  
Hold [ MODE ] for 2 seconds until  
the "seconds" digits flash  
• Hour - minute - second. AM [A] PM [P]  
• Animated 1 second bar graph  
Alarm Beep  
Hourly Beep  
• Press [ST/STP] or [LAP/RESET] to  
reset the seconds to zero; OR Press  
[MODE] to navigate to any setting  
you wish to change. See navigation  
chart at right  
FUNCTIONS MAP  
Daily Alarm Mode  
[MODE]  
[ST/STP]  
Increase  
• When the setting you wish to  
change flashes, Press [ST/STP] to  
raise the value or [LAP/RESET] to  
lower the value.  
hold  
hold  
[ST/STP]  
Pace  
[MODE]  
Dual Time  
[MODE]  
[MODE]  
Increase  
faster  
Current Time (date)  
[ST/STP]  
Note: If you Press and Hold the button,  
the rate of change is faster  
[MODE]  
minute  
[LAP/RESET]  
Decrease  
To turn Daily Alarm ON/OFF  
• Press [ ST/STP ] while in the Daily  
Alarm Mode  
[LAP/RESET]  
[MODE]  
[MODE]  
Countdown Timer  
[MODE]  
hold [LAP/RESET]  
hour  
• When the icon  
Daily Alarm is ON  
appears, the  
Decrease  
faster  
Current Time  
[seconds]  
To turn Hourly Beep ON/OFF  
• Press [ LAP/RESET ] while in the Daily Alarm Mode  
• When the icon appears, the hourly beep is ON  
Compass  
[MODE]  
Chronograph  
Daily Alarm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHRONOGRAPH MODE:  
This watch is a stopwatch  
• Measurement unit: 1/100th second  
• Measuring capacity: 99 hours 59 minutes & 59.99 seconds  
• The watch will measure elapsed time, lap time and display elapsed time without  
stopping measurement  
NOTE: If NO INPUT for 1 minute during the setup, the display will default to the  
Countdown Timer Mode  
To Use the Timer  
• Once a target time has been set (expl. 15 min. ) Press [ ST/STP ] to start  
(digits will descend to zero). Press [ ST/STP ] again to terminate the countdown  
(digits will stop)  
run time  
(minute)  
run time  
(hour)  
Chronograph Display  
• Running time (hour, minute) - displays  
in the 2nd row  
• Elapsed time will display through out the countdown  
• Running time (second, 1/100th second)  
- displays in the 3rd row  
• Animated (1/100th of a second) -  
displays in the perimeter bar graph  
To Reload the Timer  
run time  
(second)  
1/100 sec  
• Press (when the timer has stopped) [ LAP/RESET ] to reload the target time  
Alarm Sound  
• The watch will beep once when it reaches 5, 4, 3, 2 and 1 seconds  
• The watch will sound a long beep at zero.  
NOTE: Press [ MODE ] to exit the Countdown Timer  
To Measure Elapsed Time  
• In Zero Display, Press [ ST/STP ] once to  
start measurement - ( the digits will  
advance). Press [ ST/STP ] once again to stop  
- (digits will not advance) The elapsed time  
between the 1st Press [ ST/STP ] and the  
2nd Press [ ST/STP ] will display  
lap time  
PACE MODE  
Lap Display  
[LAP/  
RESET]  
Pace mode allows users to track their paces  
while performing advanced orienteering  
beats per  
minute  
techniques in the wilderness. Users will match  
their hiking pace with the pacer function’s  
audible beeps to maintain and track their speed  
and distances over unfamiliar terrain.  
To Display Lap Time  
[ST/STP]  
• With the chronograph active, Press [  
LAP/RESET ] and the cumulative lap  
times will display  
elapsed  
Pace Display  
time (run)  
Run Display  
• Press [ LAP/RESET ] again to return to  
counting display.  
Zero Display  
• The rate can be set in a range from 40 beats  
per minute to 180 beats per minute in 5 beat  
increments  
[ST/STP]  
NOTE: When the lap time is displayed the  
elapsed time is still being measured in the  
background  
[LAP/RESET]  
Pace Display  
• The rate (beats per minute) -  
To Reset the Chronograph  
hold  
[MODE]  
elapsed time  
(stopped)  
displays in the 2nd row  
[MODE]  
180  
[ST/STP]  
• If you wish to record a new set of elapsed  
times, Press (when the chronograph has  
stopped) [ LAP/RESET ] to reset the  
chronograph  
Stopped Display  
Increase  
To Use the Pace Feature  
• Once a pace rate has  
hold [ST/STP]  
been set (expl. 60 BPM),  
Press [ ST/STP ] to start  
the sound. Press [ ST/STP ]  
40  
Increase  
faster  
x 5 BPM  
COUNTDOWN TIMER MODE  
again to stop  
[LAP/RESET]  
This watch is a countdown timer  
• Measurement unit: 1 second  
• Measuring capacity: 99 hours 59 minutes & 59 seconds  
• The watch will descend from the target time to zero  
To set the Pace  
Decrease  
• In the Pace Mode, Press  
and Hold [ MODE ] for 2  
seconds until the "beat  
rate" digits flash  
• Press [ ST/STP ] to raise  
180  
40  
hold[LAP/RESET]  
animated  
bar graph  
Decrease  
x 5 BPM  
Countdown Timer Display  
• The running time (hour, minute) -  
displays in the 2nd row  
• The running time (seconds) -  
(second)  
displays in the 3rd row  
• Animated (1 second) - displays in  
the perimeter bar graph  
faster  
running time  
running time  
(minute)  
(hour)  
the value or [ LAP/RESET ]  
to lower the value. Note: If  
you Press and Hold the button, the rate of  
change is faster  
• When the rate is set, Press [ MODE ] to confirm  
running time  
Countdown Timer  
NOTE: If NO INPUT for 1 minute during setup, display  
will default to Pace Mode  
To Set the Countdown Timer Target Time  
• In the Countdown Timer Mode,  
Press and Hold [ MODE ] for 2  
seconds until the "seconds"  
digits flash  
DUAL TIME MODE  
[ST/STP]  
Increase  
Countdown Timer Mode  
hold  
[MODE]  
• Press [ MODE ] to navigate to the  
setting that you wish to change.  
See navigation chart at right  
• When the setting you wish to  
change flashes, Press [ ST/STP ]  
to raise the value or [ LAP/RESET ]  
to lower the value. Note: If you  
Press and Hold the button, the  
rate of change is faster  
This watch is a dual time piece.  
Dual time is synchronized with  
current time  
animated  
bar graph  
hold [ST/STP]  
second  
dual time  
Increase  
faster  
Dual Time Display  
dual time  
(minute)  
(hour)  
[MODE]  
minute  
• Dual time (hour, minute) -  
dual time  
(second)  
displays in the 2nd row  
• Dual time (seconds) -  
displays in the 3rd row  
• Animated (1 second) -  
displays in the perimeter  
bar graph  
[LAP/RESET]  
Decrease  
Dual Time Mode  
[MODE]  
• When the hour is set, Press  
[ MODE ] to confirm  
hour  
hold[LAP/RESET]  
[MODE]  
Decrease  
faster  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DUAL TIME MODE  
on the continent. Where True and Magnetic North are in the same direction, the  
declination is zero. At any point west of that line, your compass needle will  
point east of True North. This is called “Easterly Declination.” At any point east  
of that zero line, your compass needle will point west of True North. This is  
called “Westerly Declination.”  
To Set the Dual Time Mode  
• In Dual Time Mode, Press and  
Hold [ MODE ] for 2 seconds  
until the "minutes" digits flash  
• Press [ MODE ] to navigate to  
the setting that you wish to  
change. See navigation chart at  
right  
NOTE: The watch displays Westerly Declination as a negative number.  
example: -45  
[ST/STP]  
Increase  
Dual Time Mode  
hold  
[MODE]  
MAGNETIC DECLINATION COMPENSATION  
• When the setting you wish to  
change flashes, Press [ ST/STP ]  
to raise the value or [LAP/RESET]  
to lower the value.  
Note: If you Press and Hold the  
button, the rate of change is  
faster  
• When the hour is set, Press  
[ MODE ] to confirm and return to  
the Dual Time Mode  
hold [ST/STP]  
The watch will automatically make declination compensation. We have  
included a list of the declination angles of North America. In the  
Declination Setting Mode, input the closest angle and the watch will  
make the adjustment.  
Increase  
faster  
[MODE]  
minute  
[LAP/RESET]  
Decrease  
[MODE]  
hour  
hold[LAP/RESET]  
[MODE]  
Decrease  
faster  
NOTE: If NO INPUT for 1 minute  
during the setup, the display will  
default to the Dual Time Mode  
COMPASS MODE  
This watch is a digital compass that provides directions, bearings and  
Magnetic North Pole location.  
Caution: Accurate readings will be compromised when used near  
magnetic fields, mobile phones, speakers, motors, electrical  
appliances and inside a moving vehicle or a ferroconcrete building.  
Watch may need to be calibrated for  
declination  
Perform calibration when:  
• first time of use  
DIST is flashing  
• Declination has changed  
• Battery has been changed  
direction of travel heading indicator  
dist indicator  
compass  
direction  
compass  
bearing  
Compass Display  
To access, press [ LAP/RESET ] when in  
current time mode.  
• Compass direction - displays in 1st  
row  
• Compass bearing - displays in 2nd row  
• Animated cardinal points - display in  
perimeter bar graph  
Compass Mode  
COMPASS CALIBRATION  
Compass  
Mode  
any button  
except [LIGHT]  
1 minute  
To Calibrate the Compass  
• In the Compass Mode, Press  
and Hold [ MODE ] for 2  
seconds. DEC will display in  
the 1st row and the digits will  
flash  
• Press [ ST/STP ] to set  
desired declination angle (-90  
to +90)  
• Press [ MODE ] CAL will  
display in the 1st row and the  
north pole pointer will move  
• Lay the watch on a level  
surface. Steadily rotate the  
watch counter-clockwise  
twice. Keep the pointer in the  
same direction through out  
the rotation  
hold  
Compass Standby Mode  
• To extend battery life, watch will  
switch to standby mode if there is NO  
INPUT for 1 minute when in compass  
mode  
• Press any button except [ LIGHT ] to  
exit standby mode  
[MODE]  
Declination  
Mode  
Compass Stand-by Mode  
[LAP/RESET]  
[MODE]  
MAGNETIC DECLINATION  
[MODE]  
Calibration  
Mode  
The Magnetic sensor in the compass is  
attracted by the magnetism of the  
Earth and therefore, always points to  
the constantly shifting Magnetic  
North. There is another “North Pole.”  
True North is static and located  
geographically about 800 miles  
north of the magnetic pole. Maps  
and directions usually are based on  
True North. Magnetic declination is  
the angle between True North and  
Magnetic North. The amount of  
declination at any given point  
depends on the location of that  
point.  
true north  
magnetic north  
1 minute  
magnetic  
magnetic  
declination  
declination  
Finish  
Start  
• Press [MODE] to confirm and  
return to Compass Mode  
Rotation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FIND YOUR WAY  
TAKE A BEARING  
338˚  
Use this watch and a protractor to  
keep to a trail  
To Determine the Direction of Travel  
• Turn the watch until the  
navigation arrow points to the  
direction of travel. Press [  
COMP/RESET ] to enter Compass  
Mode  
• The compass direction displays  
in the 1st row  
• The bearing displays in the 2nd  
row  
• The bar graph will indicate  
Magnetic North  
Important: When taking a bearing, the  
watch MUST be parallel to the  
horizon or the data will be  
inaccurate.  
0˚  
0˚  
target  
Before Hiking  
finish  
north/northwest  
north  
• Locate the distance between  
and location of the turning points  
of the trail on a map  
0˚  
1.7 mi  
direction  
of travel  
• Use a protractor to determine  
the bearing of each turn and  
mark the map. See right  
0˚  
225˚  
D
C
0˚  
.5 mi  
315˚  
navigation  
Arrow  
Start to B  
B to C  
C to D  
= 315˚ / 1.2 mi  
= 0˚ / .6mi  
= 225˚ / .5 mi  
.6 mi  
magnetic north  
indicator  
compass  
direction  
0˚  
315˚  
B
D to finish = 315˚ / 1.7 mi  
bearing  
1.2 mi  
While Hiking  
• Use the watch to find the  
bearing at each turn  
start  
TAKE A REVERSE BEARING  
This watch will also display the opposite  
direction (180˚) of a bearing. A reverse  
bearing is used to accurately  
backtrack your direction or determine  
you location on a map  
LIMITED WARRANTY:  
bearing  
What is covered? Johnson Outdoors Inc. warrants your Tech4o  
Watch to be free from defects in materials or workmanship, and to  
perform accurately, for one (1) year provided it has not been  
damaged by the causes described in the next paragraph.  
What is not covered? Normal wear, and damage due to the abrasion,  
melting, misuse, alteration, and abuse (including any disassembly)  
are not covered by this warranty.  
Digital Watches are water resistant, they are not waterproof.  
Damage resulting from excessive exposure to water, heat or cold is  
not covered under this warranty. Additionally, the battery is not  
covered under the warranty.  
How to obtain warranty service or repair of your watch: Should a  
defect covered by this warranty appear in your watch, call our  
Consumer Service Department toll-free at 1.800.572.8822 for  
return authorization and instructions. (You must pay the cost of  
returning the unit to us). If the product is found to be defective in  
material or workmanship, we shall, at our option, either repair or  
replace it without charge, and will pay the cost of return shipment  
to you. If repairs are required to correct any problem not covered  
by this warranty, we will contact you for approval to proceed and to  
charge you for the components repaired or replaced, plus a  
nominal charge for labor.  
Bearing Display  
[MODE]  
To determine a Backward Bearing  
• In Compass Mode, Press  
compass direction  
has no affect  
magnetic north  
indicator has no  
affect  
[MODE] to toggle between forward  
and reverse bearings. The icon "  
displays for Reverse Bearing  
"
reverse  
bearing  
• The watch will automatically return  
to forward bearing after being  
changed to Standby Mode or Current  
Time Mode  
reverse bearing  
indicator  
Reverse Bearing Display  
LOCK A BEARING  
This watch will provide a "compass  
lock" function to secure an  
improtant bearing. When the  
"
" is displayed, the  
Bearing Display  
[ST/STP]  
compass reading will not change  
THERE ARE NO EXPRESS WARRANTIES ON YOUR WATCH THAT ARE  
NOT CONTAINED IN THIS DOCUMENT. IN NO EVENT SHALL WE BE  
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING  
FROM USING OR LOSS OF USE OF YOUR WATCH.  
To Lock / Unlock the Compass  
• When in Compass Mode,  
Press [ST/STP] to toggle between  
lock and unlock  
• The watch will automatically  
return to unlock after being  
changed to Standby Mode or  
Current Time Mode  
bearing lock  
Some states do not allow exclusion or limitation of incidental or  
consequential damages, so the above exclusion may not apply to  
you.  
This warranty gives you specific legal rights, and you may have  
other rights which vary from state to state.  
indicator  
Locked Bearing Display  
Contact us: www.tech4o.com  
FIND YOUR LOCATION  
U.S.A.:  
Canada.:  
Johnson Outdoors Canada Inc.  
4180 Harvester Road  
Johnson Outdoors Inc.  
625 Conklin Road  
PO Box 966  
Use this watch with the reverse  
bearing feature, a map and  
protractor, to determine your  
current position  
0˚  
Burlington, Ontario, Canada L7L 6B6  
Phone: 905.634.0023  
Toll Free: 1.800.263.6390  
Binghamton, NY 13902  
Phone: 607.779.2222  
Toll Free: 1.800.572.8822  
landmark A  
270˚  
Fax:  
1.800.661.1170  
To Find Your Current Position  
• Locate two distant, identifiable  
landmarks. See diagram at right  
• Find each landmark's location  
on the map  
• Use the watch to determine  
the reverse bearing of each  
landmark  
Fax:  
607.779.2293  
landmark B  
current  
position  
135˚  
• With a protractor, draw a line  
down each reverse bearing onto  
the map  
• Your current position is the  
intersection of these two lines  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tech O is a trademark of Johnson Outdoors Inc.  
Rev.A 5-07  

Tascam Universal Remote RC 898 User Manual
Toshiba Electric Heater E STUDIO1355 User Manual
Toyota Automobile 07 FJ User Manual
TRENDnet Modem tew 611brp User Manual
Tripp Lite Network Card N052 012 User Manual
Ultra electronic Printer Rio 2E User Manual
Uniflame Gas Grill HBT920W User Manual
Victory Refrigeration Refrigerator VBC 35 User Manual
ViewSonic Laptop VOT530 User Manual
Wayne Dalton Network Card WDSF 10 User Manual