Quick Installation Guide
TEW-424UB
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Before You Start
Package Contents
TEW-424UB
Utility & Driver CD-ROM
Quick Installation Guide
USB Cable
System Requirements
USB port: 1.1 or 2.0
CD-ROM Drive
CPU: Intel Pentium 300MHz or above
Memory: 256MB RAM or above
Windows XP/2000/ME/98SE
Application
Workstation with 54Mbps
Wireless USB 2.0 Adapter
(TEW-424UB)
Cable/
DSL Modem
54Mbps 802.11g
Wireless Firewall Router
(TEW-432BRP)
Workstation with 54Mbps
Wireless PCI Adapter
(TEW-423PI)
Notebook with 54Mbps
Wireless PC Card
(TEW-421PC)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2. How to Install
Important! DO NOT install the USB adapter in the computer until instructed to
do so.
Note: Refer to the User's Guide on the Driver CD-ROM for Windows 98SE and
Windows ME installation instructions
1. Insert the Utility & Driver CD-
ROM into your computer's
CD-ROM Drive and then click
Install Utility.
2. Follow the InstallShield Wizard
instructions.
Windows 2000
Windows XP
3. Click Yes.
3. Click Continue
Anyway.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click Finish.
5. Connect the wireless adapter to an
available USB port on your
computer.
Windows 2000
Windows XP
6. Drivers will install
automatically.
6. Select No, not this
time, and then click
Next.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows 2000
Windows XP
7. Click Install the
software
automatically
(Recommended)
and then click Next.
8. Follow the Found New
Hardware Wizard
instructions.
7. Click Yes. Then,
Continue to Step 10
9. Click Continue
Anyway.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Select the appropriate country
domain and then click OK.
11. Click Yes.
12. Click Finish.
Your installation is now complete.
For detailed information regarding the TEW-424UB configuration and advanced
settings, please refer to the User's Guide included on the Utility & Driver
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Wireless Configuration
Note: If you are running Windows XP, you need to disable Wireless Zero
Configuration. Please refer to question 4 of the Troubleshooting section.
1. On the bottom right-hand corner of
the screen, double-click on the
wireless LAN Configuration
utility icon
2. Click Site Survey.
3. Click the SSID that matches your
wireless access point and then
click Connect.
Wireless configuration is now complete.
For detailed information regarding the TEW-424UB configuration and advanced
settings, please refer to the User's Guide included on the Utility & Driver CD-
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Q1: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive but the installation menu
does not appear automatically. What should I do?
A1: If the window does not appear automatically, click Start, click Run, and type D:\autorun.exe where "D"
in "D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your
keyboard.
Q2: I completed all the steps in the quick installation guide, but my Wireless USB Adapter is not
connecting to my access point. What should I do?
A2: First, verify that the Network Name (SSID) matches your wireless router or access point’s Network
Name (SSID).Second, check your TCP/IP properties to ensure that Obtain an IP address automatically is
selected. Third, open the Wireless LAN Configuration Utility icon, click the Site Survey link and then click
Refresh to check and see if there are any available wireless networks listed.
Q3: Windows is unable to recognize my hardware. What should I do?
A3: First, make sure your computer meets the minimum requirements as specified in Section 1 of this
quick installation guide. Second, you must complete the installation of the wireless configuration utility (as
described in Section 2) before connecting the Wireless USB Adapter to your computer. Third, connect the
Wireless USB Adapter to a different USB port of your computer.
Q4: I cannot open the wireless configuration utility. What should I do?
A4: First, access your device manager to make sure the adapter is installed properly. If you see a
networking device with a yellow question mark or exclamation point, you will need to reinstall the device
and/or the drivers. To access your device manager, right-click My Computer, click Properties, under the
Hardware tab click Device Manager. Second, if you are running Windows XP, you need to disable
wireless zero configuration. Go to Control Panel -> Network Connections. Right click on the Wireless
Network Connection icon and select Properties. Click on the Wireless Networks tab and uncheck Use
windows to configure my wireless settings. Then click OK.
Q5: How do I install the drivers on Windows 98SE or ME?
A5: Please refer to the User's Guide included on the Driver CD-ROM.
If you still encounter problems or have any questions regarding the TEW-424UB, please refer to the User's Guide
included on the Utility & Driver CD-ROM or contact Trendnet's Technical Support Department.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause undesired
operation.
Este equipamento opera em caráter secundário, isto é, não tem
direito a proteção contra interferência prejudicial, mesmo de estações
do mesmo tipo, e não pode causar interferência a sistemas operando
em caráter primário.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria
existente en el pais o zona de instalación.
Download from Www.Somanuals.com. All Manuals Search And Download.
TRENDnet Technical Support
.
US Canada
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
.
.
.
.
.
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
20675 Manhattan Place
Torrance, CA 90501
USA
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright ©2007. All Rights Reserved. TRENDnet.
|