User Guide
TL-SF1005D
TL-SF1008D
TL-SF1016D
10/100Mbps Desktop Switch
Rev:3.0.0
7106504026
nload from Www.Somanuals.com. All Manuals Search And Down
The Switch mentioned in this User Guide stands
for TL-SF1005D/TL-SF1008D/TL-SF1016D 10/100Mbps
Desktop Switch without any explanation. For Simplicity, we
will take TL-SF1016D for example throughout this Guide.
TL-SF1016D can be mounted on a wall.
Refer to the steps below to mount the Switch on a Wall.
1. Drill two holes into the wall. Insert a screw into each
hole and leave a part of its head exposed.
2. Place the two wall-mounting slots over the screws and
slide the Switch down to fasten it.
Note: Without slots on the bottom, TL-SF1005D or
TL-SF1008D cannot be mounted on a wall.
2
nload from Www.Somanuals.com. All Manuals Search And Down
The Switch's LEDs are located on the front panel:
LED
Status
On
Indication
Power
The switch is powered on.
No Power Source.
Off
*Please check if the power cord
is connected to the Switch
properly, and make sure the
power is ON.
Ethernet On
LED
The corresponding ethernet port
is connected to a network device.
Flashing Data is being transmitted or received.
Off
No device is connected to the
corresponding port.
*Please check if the cable
connectors are firmly plugged
into the switch and the device,
and verify the connected device
is turned on and working well.
COPYRIGHT & TRADEMARKS
is a registered trademark of TP-LINK
TECHNOLOGIES CO., LTD. Other brands and product
names are trademarks or registered trademarks of their
respective holders.
Copyright © 2012 TP-LINK TECHNOLOGIES CO., LTD.
All rights reserved.
3
nload from Www.Somanuals.com. All Manuals Search And Down
|