TOA Electronics Computer Monitor 15RTV User Manual

15-INCH  
TFT-LCD MONITOR  
15RTV  
INSTRUCTION MANUAL  
Please read this manual thoroughly before use, and keep it handy for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Read all of these instructions.  
2. Save these instructions for later use.  
3. Follow all warnings and instructions marked on the product.  
4. Unplug this product from the wall outlet before cleaning.  
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
5. Do not use this product near water.  
6. Do not place this product on an unstable cart, stand or table.  
The product may fall, causing serious damage to the product.  
7. Slots and openings in the cabinet and the back are provided for ventilation: to ensure reliable  
operation of the product, these openings must not be blocked by placing the product on a bed,  
sofa, rug or other similar surface.  
This product should never be placed near or over a heat register.  
This product should not be placed in a built-in installation unless proper ventilation is provided.  
8. This product should be operated from the type of power source indicated on the marking  
label. If you are not sure of the type of power available, consult your dealer or local power  
company.  
9. This product is equipped with a 3 wire grounding type plug having a third(grounding) pin. This  
is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician  
to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug.  
10. Do not allow anything to rest on the power cord.  
Do not locate this product where persons will walk on the cord.  
11. If an extension cord is used with this product, make sure that the total of the ampere ratings  
on the products plugged into the extension cord do not exceed the extension cord ampere  
rating. Also, make sure that the total of all products plugged into the wall outlet does not  
exceed 10 amperes.  
12. Never push objects of any kind into this product through cabinet slots as they may touch  
dangerous voltage points or short out parts that could result in a risk of fire or electric shock.  
Never spill any kind of liquid on the product.  
13. Do not attempt to service this product yourself, as opening or removing covers may expose  
you to dangerous voltage points or other risks.  
INSTRUCTION MANUAL………………………………………………………………………………  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Refer all servicing to service personnel.  
14. Unplug this product from the wall outlet and refer servicing to qualified service personnel  
under the following conditions.  
A. When the power cord or plug is damaged or frayed.  
B. If liquid has been spilled into the product.  
C. If the product has been exposed to rain or water.  
D. If the Product does not operate normally when the operating instructions are followed. Adjust  
only those controls that are covered by the operating instructions since improper adjustment  
of other controls may result in damage and will often require extensive work by a qualified  
technician to restore normal operation.  
E. If the product has been dropped or the cabinet has been damaged.  
F. If the product exhibits a distinct change in performance, indicating a need for service.  
CAUTIONk  
The power supply cord is used as the main disconnect device, ensure that the  
socket-outlet is located/installed near the equipment and is easily accessible.  
ATTENTIONN  
Le cordon d`alimentation est utillsé comme interrupteur général. La prise de  
courant doit être située ou installée à proximité du matériel et être facile  
d`accès  
3 ……………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NEVER REMOVE THE BACK COVER  
Removal of the back cover should be carried out only by qualified personnel.  
DO NOT USE IN HOSTILE ENVIRONMENTS  
To prevent shock or fire hazard, do not expose the unit to rain or moisture.  
This unit is designed to be used in the office or home. Do not subject the unit to vibrations,  
dust of corrosive gases.  
KEEP IN A WELL VENTILATED PLACE  
Ventilation holes are provided on the cabinet to prevent the temperature from rising.  
Do not cover the unit or place anything on the top of unit.  
AVOID HEAT  
Avoid placing the unit in direct sunshine or near a heating appliance.  
TO ELIMINATE EYE FATIGUE  
Do not use the unit against a bright back ground and where sunlight or other light sources will  
shine directly on the monitor.  
BE CAREFUL OF HEAVY OBJECT  
Neither the monitor itself nor any other heavy object should rest on the power cord.  
Damage to a power cord can cause fire or electrical shock.  
INSTRUCTION MANUAL …………………………………………………………………………… 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular  
installation.  
If this equipment does cause harmful interference to radio or television reception which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures.  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
- Consult the dealer or an experienced radio, TV technician for help.  
- Only shielded interface cable should be used.  
Finally, any changes or modifications to the equipment by the user not expressly approved by  
the grantee or manufacturer could void the users authority to operate such equipment.  
DOC COMPLIANCE NOTICE  
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital  
apparatus set out in the radio interference regulation of Canadian Department of  
communications.  
.
5 ……………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A. BOTTOM PANEL CONTROL  
1
3
4
2
5
6
8
7
10  
11  
9
1. DC 12V IN  
2. D-SUB IN  
PC Signal Input  
3. VIDEO 1(AV1) IN  
Composite signal Input for AV1  
4. VIDEO 1(AV1) OUT  
Video looping output for AV1  
5. VIDEO 2(AV2) IN  
Composite signal Input for AV2  
6. VIDEO 2(AV2) OUT  
Video looping output for AV2  
7. AUDIO L IN  
Stereo Audio L Signal Input, This input is for AV1, AV2, S-VIDEO  
8. AUDIO R IN  
Stereo Audio R Signal Input, This input is for AV1, AV2, S-VIDEO  
9. S-VIDEO (Y/C) IN  
Y/C separated signal input  
10. S-VIDEO (Y/C) OUT  
Y/C separated signal looping output  
11. PC STEREO IN  
INSTRUCTION MANUAL…………………………………………………………………………… 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B. REMOTE CONTROLLER  
1. POWER(  
)
Turns the power ON or OFF. There will be a few  
seconds delay before the display appears.  
2. SOURCE  
Select pc or video( PC / AV1 / AV2 / S-Video ) sources.  
3. MUTE  
Mute the sound.  
4. MENU  
Activates and exits the On Screen Display.  
5. VOL(  
)
Increases or decreases the level of audio volume.  
6. UP/DOWN(  
Move to OSD menu.  
7. AUTO  
)
Auto geometry adjustment in PC Source.  
8. EXIT  
Exit the On Screen Display.  
7 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
4
5
6
7
8
3
1. SOURCE  
Select input source, and move the previous menu.  
2. MENU  
Activates and exits the On Screen Display.  
This button can also be used to move previous menu or status.  
OSD MENU(MAIN) : Input Source, Screen, Audio, OSD, Color, Utility, Exit.  
3/4. DOWN / UP  
This button allows user to enter the sub-menu of the activated function  
when down key is pressed on the main menu.  
5/6. VOL ▶  
Adjust the volume / Adjust menu settings.  
7. IR Sensor  
Remote controller sensor.  
8. POWER ON/OFF(  
)
Turns the power ON or OFF. There will be a few seconds delay before the display appears.  
The power LED(next to the power switch) lights with green when the power is turned ON.  
The power is turned off by pressing the power switch again and the power LED goes Red.  
INSTRUCTION MANUAL…………………………………………………………………………… 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. SELF-TEST DISPLAY  
When there is no connection at PC, the On Screen Display will show for 3 seconds.  
2. OSD MENU DESCRIPTION  
: Input Source  
Select PC or AV1, SVIDEO.  
9 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
: Screen  
: Brightness  
Increase or decrease the intensity of the image.  
: Contrast  
Increase or decrease the intensity (lightness or dimness) of the image.  
: H. position (PC Mode Only)  
Move image horizontally on screen right or left.  
: V. position (PC Mode Only)  
Move image vertically on screen up or down.  
: Clock (PC Mode Only)  
Adjust the vertical noise of screen image.  
: Phase (PC Mode Only)  
Adjust the number of horizontal picture elements.  
INSTRUCTION MANUAL…………………………………………………………………………… 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
: Audio  
: Volume  
Adjust audio volume.  
11 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
: OSD  
: H. Position  
Move the OSD position to right() or left().  
: V. Position  
Move the OSD position to up() or down().  
: Transparency  
Select the OSD background.  
: OSD Timer  
Select the OSD display timing.  
: Language  
Select a language among English, Français, Deutsch, Español, Danish, Italiano.  
INSTRUCTION MANUAL…………………………………………………………………………… 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
: Color (PC Mode)  
: Color Temp  
Adjust color temperature to 9300, 6500, user.  
(note : 9300 is factory default)  
: Red  
Adjust red color for user.  
: Green  
Adjust green color for user.  
: Blue  
Adjust blue color for user.  
13 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.