Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Software version TC2.1
DECEMBER 2009
Profile 42”
Profile 52”
Profile 52” Dual
Profile 65”
TANDBERG Profile
- with Codec C60
Administrator Guide
D14324.04—DECEMBER 2009
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
D14324.04—DECEMBER 2009
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Chapter 1
Introduction
Thank you for choosing TANDBERG!
In this chapter...
TANDBERG Profile has been designed
to give you many years of safe, reliable
operation.
TANDBERG Profile At a glance
Intellectual property rights
Trademark
Copyright
How to read this document
Disclaimer
You will find that some places information
has been copied from other chapters (but
adapted, when needed) to let you have all
the relevant information there and then.
This helps eliminating the need to read
through long sections before you can even
think of getting started.
Patent information
Safety instructions
Environmental issues
Our main objective with this user guide is
to address your goals and needs. Please
let us know how well we succeeded!
We recommend you visit the TANDBERG
web site regularly for updated versions of
the manual.
D14324.04—DECEMBER 2009
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Advanced configuration—Settings added
Advanced configuration—Value space changed
What’s new
Standby StandbyAction
SerialPort BaudRate
Value space: <None/PrivacyPosition>
Previous version: <9600/19200/38400/115200>
New value space: <9600/19200/38400/57600/115200>
What’s new this guide
The TANDBERG Profile 65” with Codec C60 has been added to the
Profile series and is described in this guide.
•
•
None: No action.
PrivacyPosition: Turns the camera to a sideways position for
privacy.
SystemUnit MenuLanguage
Previous version: <English/Norwegian/Swedish/German/
French/Italian/Japanese/Chinese/Russian/Spanish/
Korean/Turkish>
NOTE! The settings within the Experimental menu can be used
‘as is’. The content of the Experimental menu will change in future
software releases.
New value space: <English/Norwegian/Swedish/German/
French/Italian/Japanese/Russian/Spanish/Korean/
Finnish/ChineseSimplified/ChineseTraditional/
PortugueseBrazilian/Turkish/Polish>
Experimental Audio Input Microphone [1..4] EchoControl
HighPassFilter
Value space: <On/Off>
Advanced configuration—Removed settings
Experimental Video OptimalDefinition Profile
The Experimental settings are subject to change without notice.
They can be used “as is”. In version TC2.1 the following settings are
removed:
Value space: <Normal/Medium/High>
See the table below to find when to choose Normal, Mediumor
Highfor the optimal definition profile.
Experimental Audio Input Line [3..4] Equalizer Mode
Experimental Audio Input Line [3..4] Equalizer Number
Experimental Audio Output Line [3..6] Equalizer Mode
Experimental Audio Output Line [3..6] Equalizer Number
Experimental SoftwareUpgrade Mode
What’s new in this software version
The latest software versions for the Codec C60 is TC2.1. The
Advanced configurations menu changes are described on this page.
For a complete overview of the news and changes from TC2.0
to TC2.1 we recommend reading the software release notes
TANDBERG TC Software Release Notes (TC2).
Experimental SoftwareUpgrade ServerAddress
Go to: http://www.tandberg.com/docs
Experimental > Video > Optimal definition, for systems supporting 1080p
w288p30
256kbit/s
128kbit/s
128kbit/s
w448p30
512 kbit/s
384 kbit/s
256 kbit/s
w576p30
768 kbit/s
512 kbit/s
512 kbit/s
720p30
1080p30
Normal
Medium
High
1152 kbit/s
768 kbit/s
768 kbit/s
2560 kbit/s
1920 kbit/s
1472 kbit/s
Experimental > Video > Optimal definition, for systems supporting 720p60
w144p60
128kbit/s
128kbit/s
128kbit/s
w288p60
512 kbit/s
384 kbit/s
256 kbit/s
w448p60
1152 kbit/s
768 kbit/s
512 kbit/s
w576p60
1472 kbit/s
1152 kbit/s
768 kbit/s
720p60
Normal
Medium
High
2240 kbit/s
1472 kbit/s
1152 kbit/s
D14324.04—DECEMBER 2009
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Intellectual Property Rights
Disclaimer
Patent Information
This Administrator Guide and the Products to which it relates contain
information that is proprietary to TANDBERG and its licensors.
Information regarding the Products is found on the page entitled
License Agreements and Patent Information.
The specifications for the Products and the information in this
document are subject to change at any time, without notice, by
TANDBERG.
The products described in this manual are covered by one or more of
the following patents:
US6,584,077
US5,003,532
US7,034,860
US6.731.334
US5,838,664
US5,768,263
US7,010,119
GB1338127
US5,600,646
US5,991,277
EP01953201
Every effort has been made to supply complete and accurate
information in this Administrator Guide, however, TANDBERG
assumes no responsibility or liability for any errors or inaccuracies that
may appear in this document.
This Administrator Guide may be reproduced in its entirety,
including all copyright and intellectual property notices, in limited
quantities in connection with the use of the Products. Except for
the limited exception set forth in the previous sentence, no part of
this Administrator Guide may be reproduced, stored in a retrieval
system, or transmitted, in any form, or by any means, electronically,
mechanically, by photocopying, or otherwise, without the prior written
permission of TANDBERG. Requests for such permission should be
addressed to tandberg@tandberg.com.
INTELLECTUAL PROPERTY RIGHTS
Other patents pending.
The Products that are covered by this Administrator Guide are
protected under copyright, patent, and other intellectual property
rights of various jurisdictions. Any applicable software licenses and
any limited warranty are located in the Copyright and License Notice
section in this guide.
list
This Product is
Copyright and License Notice
COPYRIGHT © 2008–2009, TANDBERG
All rights reserved.
Trademark
The product that is covered by this Administrator Guide is protected
under copyright, patent, and other intellectual property rights of
various jurisdictions. This product is Copyright © 2009, Tandberg
Telecom AS. All rights reserved. This product includes copyrighted
software licensed from others.
TANDBERG® is a registered trademark belonging to Tandberg ASA.
Other trademarks used in this document are the property of their
respective holders.
COPYRIGHT © 2008–2009, TANDBERG
All rights reserved.
A document describing the copyright notices and the terms and
Philip Pedersens vei 20
See the document: TANDBERG Codecs C90C60C20 Copyright and
License_Information (TC20).pdf.
1366 Lysaker, Norway
Tel: +47 67 125 125 Fax: +47 67 125 234
E-mail: tandberg@tandberg.com
IMPORTANT: USE OF THIS PRODUCT IS SUBJECT IN ALL CASES
TO THE COPYRIGHT RIGHTS AND THE TERMS AND CONDITIONS
OF USE REFERRED TO ABOVE. USE OF THIS PRODUCT
CONSTITUTES AGREEMENT TO SUCH TERMS AND CONDITIONS.
D14324.04—DECEMBER 2009
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
•
Route the power cord so as to avoid it being walked on or pinched by items
placed upon or against it. Pay particular attention to the plugs, receptacles
and the point where the cord exits from the apparatus.
Safety Instructions
Safety Instructions
For your protection please read these safety
instructions completely before you connect the
equipment to the power source. Carefully observe
all warnings, precautions and instructions both on
the apparatus and in these operating instructions.
Water and Moisture
•
Do not tug the power cord.
Do not operate the apparatus under or near water – for example near a
bathtub, kitchen sink, or laundry tub, in a wet basement, near a swimming pool
or in other areas with high humidity.
•
•
If the provided plug does not fit into your outlet, consult an electrician.
Never install cables, or any peripherals, without first unplugging the device
from its power source.
•
Never install jacks for communication cables in wet locations unless the
jack is specifically designed for wet locations.
Retain this manual for future reference.
NOTE: The TANDBERG Profile 42”/52”/52”Dual/65” must be installed near a
socket-outlet. The socket-outlet shall be easily accessible after installation.
•
Do not touch the product with wet hands.
Cleaning
Servicing
Unplug the apparatus from communication lines, mains power-outlet or any
power source before cleaning or polishing. Do not use liquid cleaners or
aerosol cleaners. Use a lint-free cloth lightly moistened with water for cleaning
the exterior of the apparatus.
•
Do not attempt to service the apparatus yourself as opening or removing
covers may expose you to dangerous voltages or other hazards, and will
void the warranty. Refer all servicing to qualified service personnel.
•
Unplug the apparatus from its power source and refer servicing to qualified
personnel under the following conditions:
Ventilation
Do not block any of the ventilation openings of the apparatus. Never cover the
slots and openings with a cloth or other material. Never install the apparatus
near heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•
•
•
•
•
If the power cord or plug is damaged or frayed.
If liquid has been spilled into the apparatus.
If objects have fallen into the apparatus.
If the apparatus has been exposed to rain or moisture
Do not place the product in direct sunlight or close to a surface directly heated
by the sun.
If the apparatus has been subjected to excessive shock by being
dropped.
Lightning
•
•
•
•
If the cabinet has been damaged.
Never use this apparatus, or connect/disconnect communication cables or
power cables during lightning storms.
If the apparatus seems to be overheated.
If the apparatus emits smoke or abnormal odor.
If the apparatus fails to operate in accordance with the operating
instructions.
Dust
Do not operate the apparatus in areas with high concentration of dust.
Accessories
Vibration
Use only accessories specified by the manufacturer, or sold with the
apparatus.
Do not operate the apparatus in areas with vibration or place it on an unstable
surface.
Communication Lines
Power Connection and Hazardous Voltage
Do not use communication equipment to report a gas leak in the vicinity of the
leak.
The product may have hazardous voltage inside.
•
Never attempt to open this product, or any peripherals connected to the
product, where this action requires a tool.
•
•
•
This product should always be powered from an earthed power outlet.
Never connect attached power supply cord to other products.
In case any parts of the product has visual damage never attempt to
connect main power, or any other power source, before consulting service
personnel
•
The plug connecting the power cord to the product/power supply serves
as the main disconnect device for this equipment. The power cord must
always be easily accessible.
D14324.04—DECEMBER 2009
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
FCC rules 15B, acc. to Class A limits
Applies to: TANDBERG Profile 42”/52”/52”Dual
Class A digital device, pursuant to part 15 of the FCC Rules (For the US only).
Note : This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
EMC A-Class declaration
Applies to: TANDBERG Profile 42”/52”/52”Dual
声
明
此为 A 级产品，在生活环境中，该产品可能会造成无线电干扰。在这
种情况下，可能需要用户对其干扰采取切实可行的措施。
WARNING:
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
D14324.04—DECEMBER 2009
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
TANDBERG’s Environmental Policy
European Environmental Directives
Information for Recyclers
Environmental Issues
Environmental stewardship is important to
TANDBERG’s culture. As a global company with
strong corporate values, TANDBERG is committed
to following international environmental legislation
and designing technologies that help companies,
individuals and communities creatively address
environmental challenges.
As a manufacturer of electrical and electronic
equipment TANDBERG is responsible for
compliance with the requirements in the European
Directives 2002/96/EC (WEEE - Waste Electrical
and Electronic Equipment) and 2002/95/EC
(RoHS).
As part of compliance with the European
WEEE Directive, TANDBERG provides recycling
information on request for all types of new
equipment put on the market in Europe after
August 13th 2005.
Thank you for buying a product which contributes
to a reduction in pollution, and thereby helps save
the environment. Our products reduce the need for
travel and transport and thereby reduce pollution.
Our products have either none or few consumable
parts (chemicals, toner, gas, paper).
Please contact TANDBERG and provide the
following details for the product for which you
would like to receive recycling information:
The primary aim of the WEEE Directive and RoHS
Directive is to reduce the impact of disposal of
electrical and electronic equipment at end-of-life.
The WEEE Directive aims to reduce the amount
of waste electrical and electronic equipment sent
for disposal to landfill or incineration by requiring
producers to arrange for collection and recycling.
The RoHS Directive bans the use of certain heavy
metals and brominated flame retardants to reduce
the environmental impact of WEEE which is in
landfill or incinerated.
TANDBERG’s environmental objectives are to:
•
•
•
•
•
•
Model number of TANDBERG product
Your company’s name
Contact name
•
Develop products that reduce energy
consumption, CO2 emissions, and traffic
congestion
Address
•
•
•
Provide products and services that improve
quality of life for our customers
Telephone number
E-mail.
Produce products that can be recycled or
disposed of safely at the end of product life
TANDBERG has implemented necessary process
changes to comply with the European WEEE
Directive (2002/96/EC) and the European RoHS
Directive (2002/95/EC).
Comply with all relevant environmental
legislation.
Digital User Guides
TANDBERG is pleased to announce that we have
replaced the printed versions of our user guides
with digital versions available on the TANDBERG
environmental benefits of this are significant. The
user guides can still be printed locally, whenever
needed.
Waste Handling
In order to avoid the dissemination of hazardous
substances in our environment and to diminish the
pressure on natural resources, we encourage you
to use the appropriate recycling systems in your
area. Those systems will reuse or recycle most
of the materials of your end of life equipment in a
sound way.
TANDBERG products put on the market after
August 2005 are marked with a crossed-out
wheelie bin symbol that invites you to use
those take-back systems.
Please contact your local supplier, the regional
www.tandberg.com/recycling if you need more
information on the collection and recycling system
in your area.
D14324.04—DECEMBER 2009
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Chapter 2
Getting started
This chapter introduces you to the video
system and gets you up and going.
In this chapter...
System overview
The guide has been divided into several
chapters, all of which provide different
information. You can access the chapters
directly by clicking on the menu bar at the
top of this page.
Cable configurations
Using the remote control
Initial configurations
Waking up the system
Verify IP address settings
Setting a static IP address
Add the system to the network
Verify your settings
Date and time settings
Menu password
D14324.04—DECEMBER 2009
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
System overview
TANDBERG Profile 42”
See the installation sheet for the TANDBERG Profile 42” for
instructions on how to install the system.
PrecisionHD 1080p camera
Codec C60
•
•
•
•
Full HD video
High resolution data sharing
Full HD Multisite
Rich I/O capabilities
Monitor 42’’
Full HD LCD
PrecisionHD 1080p camera
Full HD Camera designed for visual communication with:
•
•
12 x optical zoom
Fast and precise pan, tilt and zoom
Monitor
42” Full HD LCD, 16:9, 1080 x 1920 resolution
Audio module
In the bottom module:
Wide band audio module supporting:
•
•
Audio amplifier (DNAM)
TANDBERG Codec C60
Ethernet cable
PC cable
•
•
•
20 kHz AAC-LD
Full echo canceling
Stereo
Mic cable
Audio amplifier
Optimized DNAM for TANDBERG Profile providing
crystal clear and natural audio.
Power cable
Microphones
3 x Microphones
3 x Microphones
with cables
Remote control
with batteries
Foot stand (standalone, wheelbase
or wall mounting foot module)
Remote control
•
•
1 x TANDBERG Remote Control TRC5
4 x AAA batteries
Foot stand
1 x Foot stand
•
Standalone, wheelbase or wall mounting
D14324.04—DECEMBER 2009
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
System overview
TANDBERG Profile 52”
See the installation sheet for the TANDBERG Profile 52” for
instructions on how to install the system.
PrecisionHD 1080p camera
Codec C60
•
•
•
•
Full HD video
High resolution data sharing
Full HD Multisite
Rich I/O capabilities
Monitor 52’’
Full HD LCD
PrecisionHD 1080p camera
Full HD Camera designed for visual communication with:
•
•
12 x optical zoom
Fast and precise pan, tilt and zoom
Monitor
52” Full HD LCD, 16:9, 1080 x 1920 resolution
Audio module
In the bottom module:
Wide band audio module supporting:
•
•
Audio amplifier (DNAM)
TANDBERG Codec C60
•
•
•
20 kHz AAC-LD
Full echo canceling
Stereo
Ethernet cable
PC cable
Audio amplifier
Mic cable
Optimized DNAM for TANDBERG Profile providing
crystal clear and natural audio.
Power cable
Microphones
3 x Microphones
3 x Microphones
with cables
Remote control
with batteries
Foot stand (standalone, wheelbase
or wall mounting foot module)
Remote control
•
•
1 x TANDBERG Remote Control TRC5
4 x AAA batteries
Foot stand
1 x Foot stand
•
Standalone, wheelbase or wall mounting
D14324.04—DECEMBER 2009
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
System overview
TANDBERG Profile 52” Dual
See the installation sheet for the TANDBERG Profile 52” for
instructions on how to install the system.
PrecisionHD 1080p camera
Dual 52’’ monitor
Full HD LCD
Codec C60
•
•
•
•
Full HD video
High resolution data sharing
Full HD Multisite
Rich I/O capabilities
PrecisionHD 1080p camera
Full HD Camera designed for visual communication with:
•
•
12 x optical zoom
Fast and precise pan, tilt and zoom
Dual monitor
Dual 52” Full HD LCD, 16:9, 1080 x 1920 resolution
Audio module
Wide band audio module supporting:
In the bottom module:
•
•
•
20 kHz AAC-LD
Full echo canceling
Stereo
•
•
Audio amplifier (DNAM)
TANDBERG Codec C60
Ethernet cable
PC cable
Audio amplifier
Mic cable
Optimized DNAM for TANDBERG Profile providing
crystal clear and natural audio.
Power cable
4 x Microphones
with cables
Microphones
4 x Microphones
Remote control
with batteries
Foot stand (standalone or
wall mounting foot module)
Remote control
•
•
1 x TANDBERG Remote Control TRC5
4 x AAA batteries
Foot stand
1 x Foot stand
•
Standalone or wall mounting
D14324.04—DECEMBER 2009
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
System overview
TANDBERG Profile 65”
See the TANDBERG Profile 65” Installation Sheet for instructions of
how to assemble the system.
PrecisionHD 1080p camera
Codec C60
•
•
•
•
Full HD video
High resolution data sharing
Full HD Multisite
Rich I/O capabilities
Monitor 65”
Full HD LCD
PrecisionHD 1080p camera
Full HD Camera designed for Visual communication with:
•
•
12 x optical zoom
Fast and precise pan, tilt and zoom
Monitor 65”
65” Full HD LCD, 16:9, 1080 x 1920 resolution
Audio module
Wide band audio module supporting:
In the bottom module:
•
•
•
20 kHz AAC-LD
Full echo canceling
Stereo
•
•
Audio amplifier (DNAM)
TANDBERG Codec C60
Ethernet cable
PC cable
Audio amplifier
Mic cables
Power cable
Optimized DNAM for TANDBERG Profile 65” providing
crystal clear and natural audio.
Microphones
3 x Microphones
3 x Microphones
with cables
Remote control
with batteries
Foot stand (standalone or wall
mounting foot module)
Remote control
•
•
TANDBERG Remote Control TRC5
4 x AAA batteries
Foot stand
Foot stand (standalone or wall mounting)
D14324.04—DECEMBER 2009
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
INPUTS OUTPUTS TANDBERG Basic Setup
Codec cable configuration
The main connectors for
The illustration shows you the basic setup when connecting the monitor, PC,
camera, microphone, LAN and line voltage to the TANDBERG Codec C60.
1
1
TANDBERG basic setup
are highlighted in orange.
Camera control cable
(RJ45 to DSUB)
Video to the cam
(HDMI to HDMI)
PC (video
to DVI 3)
PC (audio
to Line In 1)
Microphones
LAN/
Ethernet
Mains Power
Cable
Profile 42”/52”/65”: Single monitor to DVI-I 2
Profile 52” Dual: Dual monitors to HDMI 1 and DVI-I 2
Make sure the codec has been switched off and
disconnected from the line voltage whenever
connecting or disconnecting other equipment.
!
D14324.04—DECEMBER 2009
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Using the Remote Control
ARROW UP/DOWN: Use
the up and down
arrow keys to navigate in
the menu.
FUNCTION KEYS: Each key reflects
a soft key on screen and represents
shortcuts and advanced functions.
The functions keys
in the upper part of
the remote control
reflects the soft keys
on screen.
ARROW LEFT: Press
ARROW RIGHT: Press
the right arrow key
to expand the selected
menu item or to move
to the right in a text
field.
the left arrow key
to go one step back
in the menu or to
move to the left in a
text field.
... and the middle
part of the remote
control is used to
handle the video
part of the call.
... while the lower
part of the remote
control resembles
very much the
keypad of a mobile
phone
OK/SELECT: Press the OK/
Select key to confirm your
choice or selection.
MICROPHONE: Press the
Microphone key to toggle
the microphones on/off.
PRESENTATION: Press the
Presentation key to show/hide
a presentation.
Batteries
Make sure the remote control has
working batteries (4 x AAA batteries).
PHONE BOOK: Press
the Phone Book key to
display the local phone
book.
LAYOUT: Press the Layout
key to display the layout
menu, then select a view
in the menu.
VOLUME: Press
ZOOM: Press
the + or – on the
Volume key to adjust
the codec volume.
the + or – on the Zoom
key to zoom the camera
in and out.
HOME: Press the
Home key to go back
to the main menu.
MUTE: Press the – to
mute an incoming call.
D14324.04—DECEMBER 2009
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Getting started
Using the Remote
CALL KEY
ALPHANUMERIC KEYPAD
Control, cont...
INITIATE CALL: Select a name from the Phone book or enter the
name, number or URI and press the Call key to initiate the call.
Usuld
us
SHORTCUT TO RECENT CALLS: Use the Call button as a
shortcut to Recent Calls when the Call menu is not visible.
The functions keys
in the upper part of
the remote control
reflects the soft keys
on screen.
0-9, a-z, period (.), @, space, *:
Press a key repeatedly to toggle
between the options displayed
on each key.
END CALL, STANDBY:
Press the End Call
key to end a call, or
when idle, press and
hold the key to go into
standby mode.
... and the middle
part of the remote
control is used to
handle the video
part of the call.
abc/123 #: Press the # key to
toggle between lower case
characters and numbers.
... while the lower
part of the remote
control resembles
very much the
keypad of a mobile
phone
CLEAR: Press the Cancel
key to remove characters
in a text field.
Waking up the system
IR sensor range (DIP switch setting)
Press any key on the remote control to wake up the system.
The IR sensor has a short and long range. Open the battery cover and remove
the batteries to set the DIP switch.
•
•
Short range (1 m): Move the DIP switch down
Long range: Move the DIP switch up.
Press the HOME
key to show the
menu on screen
The DIP
switch
Touch the rubber
line sensors along
the sides to wake
up the system
D14324.04—DECEMBER 2009
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Password protection of the Advanced menu
Initial configurations
If a menu password has been set you will be asked to enter a password to get access to the Advanced menu. By default, the
menu password is not set when starting up the system for the first time.
Before you can start making calls with the system you will need to set the IP address,
add the system to the network and check if the date and time settings needs to be
adjusted. When starting up the system the first time the menu password is not set. But,
when done it is recommended to set a menu password to get access to the Advanced
configuration menu.
After having finished the initial configurations it is recommended to define an menu password.
Waking up the system
If you need to set a static IP address
If no menu on screen, press Home (
the menu on screen.
) on the remote control to show
How to set the static IP address:
1
2
3
1. Navigate to Settings > Advanced > IP settings.
If the system does not show any menu on screen:
1. Make sure the monitor has been turned on
2. Make sure the remote control has the batteries installed
3. Make sure the codec has been turned on
2. Set IP Assignment to Static. Press OK ( ) to save the change.
3. Enter the IP Address, Subnet Mask and Gateway address in the address fields. The
sequence is shown below.
4. Navigate to OK to save the changes, or Cancel to leave without saving.
4. If the system has just been turned on, wait a few minutes to allow the
system to startup
5. Press Home (
) to exit.
Verify IP address settings
192.168.1.1
How to go to the System Information page to verify the IP address:
255.255.255.0
192.168.1.1
1. Navigate to Settings > System Information to open the System
information page.
2. When the IP address is automatically assigned from a DHCP server, the
network IP address of the codec is shown on the System Information
page.
3. Press Home (
) to exit.
D14324.04—DECEMBER 2009
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Adding the system to the network
Verify your settings
Your service provider should have provided you with the information you need to
get online.
We strongly recommend that you verify the settings by inspecting the System
Information list.
4
5
•
For H.323 type of communication, this will include such things as system
name, H.323 alias, gatekeeper address, etc.
You do this by accessing the System Information in the same way as you did
when you verified you IP address setting.
•
•
For SIP type of communication, similar type of information will be supplied.
1. Navigate to Settings > System Information
For networks administrated through TMS (TANDBERG Management Suite),
your TMS administrator will be able to assist you when configuring.
2. Verify the previous configurations.
•
If you successfully registered to a Gatekeeper the Status will show
Registered. If the registration failed the Status will show Not registered.
The H.323 and SIP profiles are configured from the Advanced configurations
menu:
•
If you successfully registered to a SIP server the Status will show
Registered. If the registration failed the Status will show Not registered.
Navigate to Settings > Advanced > Advanced configuration and make a search
for H323 or SIP, or select H323 > Profile 1 or SIP > Profile 1 from the menu
3. Press Home (
) to exit.
•
Expand the items in need of modification and enter the information supplied by
your service provider.
Configure the H.323 Profile in the
Advanced configuration menu
ADVANCED CONFIGURATION
Adjusting the date and time settings
Verify the date and time to see if the date and time settings need to be adjusted.
The date and time is located in the upper right corner on screen.
Configure the SIP Profile in the
Advanced configuration menu
6
How to adjust the date and time settings:
ADVANCED CONFIGURATION
1. Navigate to Settings > Date and time
2. When Set date and time is set to Auto there will be an automatic update of
the date and time settings. If you want to manually adjust the date and time
settings, select Manual and enter the Day, Month, Year and Time. After
having adjusted the settings manually you can set the Set date and time
back to Auto for automatic update.
3. Select the appropriate Time zone from the list of GMT time zones.
4. Select the appropriate Date format from the list.
firstname.lastname@company.com
5. Select the appropriate Time format from the list.
6. Press Home (
) to exit.
D14324.04—DECEMBER 2009
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Setting a menu password
It is highly recommended to define a password to access the Advanced menus.
Changing these settings may affect the behavior of the system and should be
done by the system administrator.
7
NOTE! The menu password will only apply to the Advanced menu. The codec and
the web interface can be password protected with an administrator password.
See the Password protection section in the Appendices for a detailed description.
NOTE! When you define or change a password make sure you save a copy of the
password in a safe place.
How to set the menu password
Navigate to Settings > Advanced > Change password
1. On the remote control, press the # key to toggle between lower or upper case
characters and numbers: abc/ABC/123
2. Enter the menu password. The password you enter is hidden, as each
character is replaced with a star (*).
3. Navigate to Save to save the changes, or Cancel to leave without saving.
4. Press Home (
) to exit.
D14324.04—DECEMBER 2009
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Chapter 3
About the menus
In this chapter...
Explains the menu system
D14324.04—DECEMBER 2009
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
About the menus
The Home menu
The Home menu is explained in the TANDBERG Profile User Guide.
The menu path to the Advanced configuration
menu:
1. The Home menu
•
•
•
•
Call: Menu for making calls.
2. The Settings menu
Presentation: Select a presentation source.
Camera control: Control the camera settings.
Settings: Configure the system.
3. The Advanced menu
4. The Advanced configuration menu
The user documentation structure
•
The Administrator Guide explains all settings
found in the Advanced and Advanced
configuration menus.
The Settings menu
The Settings menu is explained in the TANDBERG Profile User Guide.
•
The User Guide explains how to make use
of the video system, which includes making
calls and explaining about the settings found
in the Home menu, Settings menu and
the Programmable softbuttons from the
Advanced menu.
•
•
•
•
•
•
•
•
•
•
Layout: Select screen layout, including selfview.
Main source: Select the main video source.
Call settings: Configure the default bit rate and auto answer settings.
Language: Select the preferred menu language.
Date and time: Configure date and time settings.
Navigating in the menus
Use the remote control to navigate in the menus:
Sounds and alerts: Select a ring tone, the ring tone volume and key tone.
Wallpaper: Select the background picture on screen
System Information: See an overview of the system configurations
Advanced: Configure the advanced settings.
•
•
•
Use the arrows down/up to select a menu item
Use the arrow right to expand the selection
Use the arrow left to go one step back
Restart: Select this option to restart the system.
Changing a value
•
Select a value from a drop down list and press
the OK button to save, or press the left arrow to
leave without saving.
The Advanced menu
•
Enter a value/text in a value/text field. Press
Save to save the change or Cancel to leave
without saving.
NOTE! The Advanced menu can be password protected with a menu password.
•
Programmable soft buttons: User defined soft-buttons for selecting main video source,
camera presets or speed dial.
•
•
•
•
Audio input levels: Lets you see a visual overview of the audio input levels.
IP settings: Lets you configure the IP settings.
Advanced configuration: Lets you configure the system settings.
Change password: Lets you change the menu password.
Download the TANDBERG user guides from
the web site.
D14324.04—DECEMBER 2009
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings library
Cameras
Appendices
Contact us
The settings menu
Chapter 4
The system settings menus
In this chapter...
Explaining the system
settings menus
D14324.04—DECEMBER 2009
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The settings menu
The Settings library
Cameras
Appendices
Contact us
The Advanced menus
Changes in the Advanced menus settings may
affect the behavior of the system and should be
configured by the system administrator.
How to change a value
•
Select a value from a drop down list and press
the OK button to save, or press the left arrow to
leave without saving.
•
Enter a value/text in a value/text field. Press
Save to save the change or Cancel to leave
without saving.
Description of each setting
Each of the settings in the Advanced configuration
menu is explained in the Settings library section.
Press the Settings library in the menu on top of
the page to go to this section.
The Advanced menu can be password
protected. If so, type in the password and
press OK to proceed or Cancel to go
back to the Settings menu.
D14324.04—DECEMBER 2009
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The settings menu
The Settings library
Cameras
Appendices
Contact us
The Advanced
Search
Enter the as many characters as needed, until the setting you are searching for displays in the list.
configuration menu
The Advanced configuration menu contains all the
system settings, included the IP settings which also
are available in the Advanced menu.
Example 1: Search for “sip” to see all the SIP settings.
firstname.lastname@company.com
192.168.10.1
The search functionality
On the remote control, press the # key to toggle
between lower or upper case characters and
numbers: abc/ABC/123
When searching for words like “H323”, “SIP” or
“key”, all settings with these characters in the name
will be listed.
•
Search: Enter the as many characters as
needed until the setting you are searching for
displays in the list.
•
•
Refine the search: Add or remove characters
until you get the desired result.
Clear: Remove all characters to return to the
main view.
Example 2: Search for H323. In this case it is sufficient to enter “h3” to display all the H323 settings.
firstname.lastname@company.com
192.168.10.1
D14324.04—DECEMBER 2009
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The settings menu
The Settings library
Cameras
Appendices
Contact us
The Advanced menu
How to change the menu password
If a menu password has been set you will be asked
to enter a password to get access to the Advanced
menu.
When turning on the system for the first time, the
password is not set.
NOTE! The menu password will only apply to the
Advanced menu. The codec and the web interface
can be password protected with an administrator
password. See the Password protection section in
the Appendices for a detailed description.
When you define or change a password
make sure you save a copy of the password
in a safe place.
!
Setting a menu password
1. On the remote control, press the # key
to toggle between lower or upper case
characters and numbers: abc/ABC/123
2. Enter the password. The password you
enter is hidden, and each character is
replaced with a star (*).
3. Press Save to save the changes, or
Cancel to leave without saving.
4. Press Home (
) to exit.
The Advanced menu can be password
protected. If so, type in the password and
press OK to proceed or Cancel to go
back to the Settings menu
D14324.04—DECEMBER 2009
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Chapter 5
The system settings library
This chapter gives a detailed description of
the advanced system settings
In this chapter...
Audio
The advanced settings defines the system
settings and are structured in a hierarchy,
making up a database of system settings.
Cameras
Conference
H323 Profile
Network
Changes in the system settings may affect
the system and should be done by the
system administrator
Network Services
Phone Book Server
Provisioning
Serial Port
SIP Profile
Standby
System Unit
Video
Experimental
D14324.04—DECEMBER 2009
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Audio Input Line [1..2] LoopSuppression: <Off>
Loop suppression detects whether a delayed signal loop is present from an audio Line output to an audio
Line input on the codec. If a loop is detected, this unwanted feedback is suppressed.
Description of the System settings
In the following pages you will find a complete list of the system settings. The examples shows either the
default value or an example of a value.
On: Set to On to activate Loop Suppression.
Off: Set to Off to deactivate Loop Suppression. Note! Codec C60 does currently not support Loop
Suppression, hence Loop Suppression can be set to Off only.
All specifications are subject to change without prior notice.
We recommend you visit the TANDBERG web site regularly for updated versions of the manual.
Example: Audio Input Line 1 LoopSuppression: Off
Audio Input Line [1..2] Mode: <On/Off>
Determines whether or not an Audio Line input is enabled. Addresses the specific Audio Line input.
The Audio settings
On: Set to On to enable the Audio Line input.
Off: Set to Off to disable the Audio Line input.
Audio Input HDMI [2..2] Level: <-24..0>
Defines the input level of HDMI input 2 in steps of 1dB from -24 dB to 0 dB.
Example: Audio Input Line 1 Mode: On
See the Audio Level tables in the Codec C60 System Integrators Guide for a complete overview of the menu
values represented in dB.
Audio Input Microphone [1..4] EchoControl Mode: <On/Off>
The echo canceller continuously adjusts itself to the audio characteristics of the room and compensate for
any changes it detects in the audio environment. If the changes in the audio conditions are very significant
the echo canceller may take a second or two to re-adjust. Addresses the specific microphone.
Range: -24 to 0 dB
Example: Audio Input HDMI 3 Level: 0
On: Echo Control is normally set to On to prevent the far end from hearing their own audio. Once selected,
echo cancellation is active at all times.
Audio Input HDMI [2..2] Mode: <On/Off>
Off: Echo Control should be switched Off if external echo cancellation or playback equipment is used.
Determines whether or not the two audio channels on the HDMI 2 input should be enabled.
On: Set to On to enable the audio channels on the HDMI 2 input.
Off: Set to Off to disable the audio channels on the HDMI 2 input.
Example: Audio Input Microphone 1 EchoControl Mode: On
Audio Input Microphone [1..4] EchoControl NoiseReduction: <On/Off>
Example: Audio Input HDMI 2 Mode: On
The system has a built-in noise reduction which reduces constant background noise (e.g. noise from air-
conditioning systems, cooling fans etc.). In addition, a high pass filter (Humfilter) reduces very low frequency
noise. Requires the Echo Control Mode to be enabled for the specified microphone. Addresses the specific
microphone.
Audio Input Line [1..2] Channel: <Left/Right/Mono>
Defines whether the Audio Line input is a mono signal or part of a multichannel signal.
Left: The Audio Line input signal is the left channel of a stereo signal.
Right: The Audio Line input signal is the right channel of a stereo signal.
Mono: The Audio Line input signal is a mono signal.
On: The Noice Reduction should be set to On in the presence of low frequency noise.
Off: Turns Noise Reduction Off for the specified microphone input.
Example: Audio Input Microphone 1 EchoControl NoiseReduction: On
Example: Audio Input 1 Channel: Left
Audio Input Microphone [1..4] Level: <0..24>
Defines the input level of each microphone in steps of 1dB from -24 dB to 0 dB. Addresses the specific
microphone.
Audio Input Line [1..2] Level: <0..24>
Defines the input level of each Line input in steps of 1dB from 0dB to 24 dB. Addresses the specific Audio
Line input.
See the Audio Level tables in the Codec C60 System Integrators Guide for a complete overview of the menu
values represented in dB.
See the Audio Level tabels in the Codec C60 System Integrators Guide for a complete overview of the menu
values represented in dB.
Range: 0 to 24 dB
Range: 0 to 24 dB
Example: Audio Input Microphone 1 Level: 14
Example: Audio Input Line 1 Level: 10
D14324.04—DECEMBER 2009
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Audio settings, continued...
Audio Input Microphone [1..4] Mode: <On/Off>
The Audio settings, continued...
Audio Output Line [1..2] Level: <-24..0>
Determines whether or not a microphone input is enabled. Addresses the specific microphone input.
Defines the output level of the specified Audio Output Line in steps of 1 dB from -24 dB to 0 dB. Addresses
the specific Audio Line output connector.
On: Set to On to enable the microphone input.
See the Audio Level tables in the Codec C60 System Integrator Guide for a complete overview of the menu
values represented in dB.
Off: Set to Off to disable the microphone input.
Example: Audio Input Microphone 1 Mode: On
Range: -24 to 0 dB
Example: Audio Output Line 1 Level: -10
Audio Input Microphone [1..4] Type: <Microphone/Line>
The microphone inputs are intended for electret type microphones. The microphone input can be set to line
or microphone mode. Addresses the specific microphone.
Audio Output Line [1..2] Mode: <On/Off>
Determines whether or not an Audio Line output is enabled. Addresses the specific Audio Line output.
Microphone: 48 V Phantom voltage and pre-amplification is On
On: Set to On to enable the Audio Line output.
Line: Select Line when you have a standard balanced line input. The phantom voltage and pre-amplification
is Off.
Off: Set to Off to disable the Audio Line output.
Example: Audio Input Microphone 1 Type: Line
Example: Audio Output Line 1 Mode: On
Audio Output HDMI [1..1] Level: <-24..0>
Audio Output Line [1] Type: <Auto/SPDIF>
Defines the output level of HDMI output 1 in steps of 1 dB from -24 dB to 0 dB.
Determines if the Audio Line output is an analog or digital type output.
See the Audio Level tables in the Codec C60 System Integrators Guide for a complete overview of the menu
values represented in dB.
Auto: If a TANDBERG Digital NAM is detected then SPDIF mode will be selected, otherwise analog mode
will be selected.
Range: -24 to 0 dB
SPDIF: Set to SPDIF when you want the Audio Line 1 output to be in digital mode.
Example: Audio Output HDMI 1 Level: 0
Example: Audio Output Line 1 Type: Auto
Audio Output HDMI [1..1] Mode: <On/Off>
Audio Output Line [2] Type: <Analog>
Determines whether or not the audio channel on the HDMI output should be enabled.
On: Set to On to enable the audio channel on the HDMI 1 or HDMI 3 output.
Off: Set to On to disable the audio channel on the HDMI 1 or HDMI 3 output.
Applies to Line 2: This is an analog output.
Example: Audio Output Line 1 Type: Analog
Example: Audio Output HDMI 1 mode: On
Audio SoundsAndAlerts KeyTones Mode: <On/Off>
The system can produce a sound every time a key on the remote control is pressed.
On: There will be a sound indicator when pressing keys on the remote control.
Off: The key tone on the remote control is switched off.
Audio Output Line [1..2] Channel: <Left/Right/Mono>
Defines whether the Audio Line output is a mono signal or part of a multichannel signal.
Left: The Audio Line output signal is the left channel of a stereo signal.
Right: The Audio Line output signal is the right channel of a stereo signal.
Mono: The Audio Line output signal is a mono signal.
Example: Audio SoundsAndAlerts KeyTones Mode: Off
Audio SoundsAndAlerts RingTone: <Marbles/IceCrystals/Polaris/Alert/Discrete/Fantasy/
Jazz/Nordic/Echo/Rhythmic>
Example: Audio Output Line 1 Channel: Left
Selects the ringtone for incoming calls.
Range: Select a tone from the list of ringtones.
Example: Audio SoundsAndAlerts RingTone: Jazz
D14324.04—DECEMBER 2009
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Audio settings, continued...
Audio SoundsAndAlerts RingVolume: <0..100>
The Camera settings, continued...
Cameras Camera [1..7] Flip: <On/Off>
Sets the ring tone volume[0-100] for an incoming call in steps of 0.5dB from -34.5dB to 15dB. Volume 0 =
Off.
Applies to cameras which supports Flip mode. Enables the video on screen to be flipped upside down.
Addresses the specific camera. Since TANDBERG PrecisionHD 1080p camera auto-detects if the camera is
mounted upside down, the flip mode is not necessary to use for this camera.
Example: Audio SoundsAndAlerts RingVolume: 50
On: When set to On the video on screen is flipped. This setting is used with cameras that can be mounted
upside down, but cannot auto detect that the camera is mounted upside down.
Audio Volume: <0..100>
Off: Set to Off to display the video on screen the normal way.
Sets the volume level [0-100] on the loudspeaker output in steps of 0.5dB from -34.5dB to 15dB. Volume 0
= Off.
Example: Cameras Camera 1 Flip: Off
Example: Audio Volume: 70
Cameras Camera [1..7] Focus Mode: <Auto/Manual>
Determines whether the camera should be in auto focus or manual focus mode. Addresses the specific
camera.
Auto: When set to Auto the focus will be updated throughout the call. When moving the camera, the system
will use auto focus for a few seconds to set the right focus of the new camera position. After a few seconds
auto focus is turned off to prevent continuous focus adjustments of the camera.
The Camera settings
Manual: If set to Manual the focus is adjusted manually.
Cameras Camera [1..7] Backlight: <On/Off>
Backlight is used to compensate for lights shining directly at the camera (usually the sun entering the
window) to avoid a too dark image from the room. Addresses the specific camera.
Example: Cameras Camera 1 Focus Mode: Auto
On: Set to On to turn on the backlight compensation.
Off: Set to Off to turn the backlight compensation off.
Cameras Camera [1..7] Gamma Level: <0..7>
By setting the Gamma Level you can select which gamma correction table to use. This setting may be useful
in difficult lighting conditions, where changes to the the brightness setting does not provide satisfactory
results. Requires the Gamma Mode to be set to Manual. Addresses the specific camera.
Example: Cameras Camera 1 Backlight: Off
Range: 0-7
Cameras Camera [1..7] Brightness Level: <1..31>
Define the Brightness Level for the camera. Requires the Brightness Mode to be set to manual. Addresses
the specific camera.
Example: Cameras Camera 1 Gamma Level: 0
Cameras Camera [1..7] Gamma Mode: <Auto/Manual>
Range: 1-31
Applies to cameras which supports Gamma mode. The Gamma Mode setting enables for gamma
corrections. Gamma describes the nonlinear relationship between image pixels and monitor brightness.
Addresses the specific camera. The TANDBERG PrecisionHD 1080p camera do not need Gamma Mode.
The TANDBERG PrecisionHD 720p camera do support Gamma Mode.
Example: Cameras Camera 1 Brightness Level: 1
Cameras Camera [1..7] Brightness Mode: <Auto/Manual>
Define whether to control the camera brightness manually or to have it automatically adjusted by the system.
Addresses the specific camera.
Auto: Auto is the default and the recommended setting.
Manual: In severe light conditions, you may switch mode to manual and specify explicitly which gamma
table to use by setting the Gamma Level.
Auto: When set to Auto, the camera brightness is automatically set by the system.
Manual: Set to Manual to enable manual control of the camera brightness, e.g. the level of the brightness
level setting will be used for the camera.
Example: Cameras Camera 1 Gamma Mode: Auto
Example: Cameras Camera 1 Brightness Mode: Auto
D14324.04—DECEMBER 2009
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Camera settings, continued...
The Conference settings
Cameras Camera [1..7] IrSensor: <On/Off>
Conference [1..1] AutoAnswer Delay: <0..50>
The Camera IR setting determines whether the infrared receiver at the camera should be enabled or not.
The IR sensor LED is located in the front of the camera and flickers when the IR sensor is activated from the
remote control. Addresses the specific camera.
Defines how long (in seconds) an incoming call has to wait before it is answered automatically by the
system. Requires the Autoanswer Mode to be enabled.
Range: 0-50 seconds
On: Set to On to enable the IR sensor on the camera.
Off: Set to Off to disable the IR sensor on the camera.
Example: Conference 1 AutoAnswer Delay: 0
Example: Cameras Camera 1 IrSensor: On
Conference [1..1] AutoAnswer Mode: <On/Off>
The Autoanswer setting determines whether an incoming call is put through automatically or manually.
Cameras Camera [1..7] Mirror: <On/Off>
On: The system will automatically answer all incoming calls.
The Mirror mode makes it possible to reverse the the video on screen. Normally you will see yourself in the
same view as other people sees you. With mirror enabled the experience will be like looking at yourself in a
mirror. Addresses the specific camera.
Off: All incoming call must be answered manually by pressing the OK key or the green Call key on the
remote control.
Example: Conference 1 AutoAnswer Mode: Off
On: Set to On to see the selfview in mirror mode, e.g. the selfview is reversed and the experience of selfview
is as seeing yourself in a mirror.
Off: Set to Off to see the selfview in normal mode, e.g. the experience of selfview is as seeing yourself as
other people see you.
Conference [1..1] AutoAnswer Mute: <On/Off>
The Autoanswer Mute setting determines whether the microphone is muted when an incoming call is
automatically answered.
Example: Cameras Camera 1 Mirror: Off
On: The incoming call will be muted when automatically answered.
Off: The incoming call will not be muted.
Cameras Camera [1..7] Whitebalance Level: <1..16>
Example: Conference 1 AutoAnswer Mute: Off
Specify which camera to control. Define the Whitebalance Level for the camera. Requires the Whitebalance
Mode to be set to manual. Addresses the specific camera.
Range: 1-16
Conference [1..1] DefaultCall Protocol: <H323/SIP>
Example: Cameras Camera 1 Whitebalance Level: 1
Specify the Default Call Protocol to be used when placing calls from the system. The call protocol can also
be defined directly for each call when setting up a call.
H.323: Select H.323 to ensure that calls are set up as a H.323 calls.
SIP: Select SIP to ensure that calls are set up as a SIP calls.
Cameras Camera [1..7] Whitebalance Mode: <Auto/Manual>
Define whether to control the camera whitebalance manually or to have it automatically adjusted by the
system. Addresses the specific camera.
Example: Conference 1 DefaultCall Protocol: H323
Auto: When set to Auto, the camera will continuously adjust the whitebalance depending on the camera
view.
Conference [1..1] DefaultCall Rate: <64..6000>
Specify the Default Call Rate to be used when placing calls from the system. The call rate can also be
defined directly for each call when setting up a call.
Manual: Set to Manual to enable manual control of the camera whitebalance, e.g. the level of the
whitebalance level setting will be used for the camera.
Example: Cameras Camera 1 Whitebalance Mode: auto
Range: 64-6000 kbps
Example: Conference 1 DefaultCall Rate: 768
D14324.04—DECEMBER 2009
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Conference settings, continued...
Conference [1..1] DoNotDisturb Mode: <On/Off>
The H323 Profile settings
H323 Profile [1..1] Authentication LoginName: <S: 0, 50>
The Do Not Disturb setting determines whether or not there should be an alert on incoming calls.
The system sends the Authentication Login Name and the Authentication Password to a H.323 Gatekeeper
for authentication. The authentication is a one way authentication from the codec to the H.323 Gatekeeper,
i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no authentication
is required, the system will still try to register. Requires the H.323 Gatekeeper Authentication Mode to be
enabled.
On: Set to On when you want no alert to incoming calls. The calling side will receive a busy signal when
trying to call the codec.
Off: This is the default setting. The DoNotDisturb is automatically turned Off if the codec receives any IR
signal from the handheld remote control.
Format: String with a maximum of 50 characters.
Example: DoNotDisturb Mode: Off
Example: H323 Profile 1 Authentication LoginName: “”
Conference [1..1] Encryption Mode: <Off/BestEffort>
BestEffort: The system will use encryption whenever possible.
H323 Profile [1..1] Authentication Password: <S: 0, 50>
The system sends the Authentication Login Name and the Authentication Password to a H.323 Gatekeeper
for authentication. The authentication is a one way authentication from the codec to the H.323 Gatekeeper,
i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no authentication
is required, the system will still try to register. Requires the H.323 Gatekeeper Authentication Mode to be
enabled.
In Point to point calls: If the far end system supports encryption (AES-128), the call will be encrypted. If not,
the call will proceed without encryption.
In MultiSite calls: In order to have encrypted MultiSite conferences, all sites must support encryption. If not,
the conference will be unencrypted.
Icons on screen: A padlock with the text “Encryption On” displays on screen, for a few seconds, when the
conference starts.
Format: String with a maximum of 50 characters.
Example: H323 Profile 1 Authentication Password:
Off: The system will not use encryption.
Example: Conference 1 Encryption Mode: BestEffort
H323 Profile [1..1] Authentication Mode: <On/Off>
On: If the H.323 Gatekeeper Authentication Mode is set to On and a H.323 Gatekeeper indicates
that it requires authentication, the system will try to authenticate itself to the gatekeeper. Requires the
Authentication ID and Authentication Password to be defined on both the codec and the Gatekeeper.
Conference [1..1] FarEndControl Mode: <On/Off>
Lets you decide if the remote side (far end) should be allowed to select your video sources and control your
local camera (pan, tilt, zoom).
Off: If the H.323 Gatekeeper Authentication Mode is set to Off the system will not try to authenticate itself to
a H.323 Gatekeeper, but will still try a normal registration.
On: Set to On when you want the the far end to be able to select your video sources and control your
local camera (pan, tilt, zoom). You will still be able to control your camera and select your video sources as
normal.
Example: H323 Profile 1 Authentication Mode: Off
Off: When set to Off the far end can not access any of the features above on your system.
H323 Profile [1..1] CallSetup Mode: <Direct/Gatekeeper>
The H.323 Call Setup Mode defines whether to use a Gatekeeper or Direct calling when establishing H323
calls.
Example: Conference 1 FarEndControl Mode: On
Conference [1..1] IncomingMultisiteCall Mode: <Allow/Deny>
Direct: An IP-address must be used when dialling in order to make the H323 call.
The Incoming Multisite Call setting determines whether or not the system should accept incoming calls to an
already active conference.
Gatekeeper: The system will use a Gatekeeper to make a H.323 call. When selecting this option the H323
Profile Gatekeeper Address and H323 Profile Gatekeeper Discovery settings must also be configured.
Allow: When set to Allow, and with an ongoing MCU call/conference, the user can accept another incoming
call. This will result in the incoming call being added to the MCU conference.
NOTE! Direct H.323 calls can be made even though the H.323 Call Setup Mode is set to Gatekeeper.
Example: H323 Profile 1 CallSetup Mode: Gatekeeper
Deny: The system will not accept incoming calls when you are in a call. The calling side will receive a busy
signal.
H323 Profile [1..1] Gatekeeper Address: <S: 0, 64>
Example: Conference 1 IncomingMultisiteCall Mode: Allow
Specifies the IP address of the Gatekeeper. Requires the H.323 Call Setup Mode to be set to Gatekeeper
and the Gatekeeper Discovery to be set to Manual.
Format: String with a maximum of 64 characters.
Example: H323 Profile 1 Gatekeeper Address: “10.47.1.58”
D14324.04—DECEMBER 2009
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The H323 Profile settings, continued...
The Network settings
H323 Profile [1..1] Gatekeeper Discovery: <Manual/Auto>
Network [1..1] Assignment: <Static/DHCP>
Determines how the system shall register to a H.323 Gatekeeper.
Defines whether to use DHCP or Static IP assignment.
Manual: The system will use a specific Gatekeeper identified by the Gatekeeper’s IP-address.
Static: The IP Address, Subnet Mask and Default Gateway for the system must be specified in the
respective address fields.
Auto: The system will automatically try to register to any available Gatekeeper. If a Gatekeeper responds
to the request sent from the codec within 30 seconds this specific Gatekeeper will be used. This requires
that the Gatekeeper is in auto discovery mode as well. If no Gatekeeper responds, the system will not use a
Gatekeeper for making H.323 calls and hence an IP-address must be specified manually.
DHCP: The system adresses are automatically assigend by the DHCP server.
Changes to this setting requires a restart of the codec.
Example: Network 1 Assignment: DHCP
Example: H323 Profile 1 Gatekeeper Discovery: Manual
Network [1..1] DNS Domain Name: <S: 0, 64>
DNS Domain Name is the default domain name suffix which is added to unqualified names.
H323 Profile [1..1] H323Alias E164: <S: 0, 30>
The H.323 Alias E.164 defines the address of the system, according to the numbering plan implemented
in the H.323 Gatekeeper. The E.164 alias is equivalent to a telephone number, sometimes combined with
access codes.
Example: If the DNS Domain Name is “company.com” and the name to lookup is “MyVideoSystem”, this will
result in the DNS lookup “MyVideoSystem.company.com”.
Format: String with a maximum of 64 characters.
Format: Compact string with a maximum of 30 characters. Valid characters are 0–9, * and #.
Example: Network 1 DNS Domain Name: “company.com”
Example: H323 Profile 1 H323Alias E164: “90550092”
Network [1..1] DNS Server [1..5] Address: <S: 0, 64>
Defines the network addresses for DNS servers. Up to 5 addresses may be specified. If the network
addresses are unknown, please contact your administrator or Internet Service Provider.
H323 Profile [1..1] H323Alias ID: <S: 0, 49>
Lets you specify the H.323 Alias ID which is used to address the system on a H.323 Gatekeeper and will be
displayed in the call lists. Example: “firstname.surname@company.com”, “My H.323 Alias ID”
Format: String with a maximum of 64 characters.
Format: String with a maximum of 49 characters
Example: Network 1 DNS Server 1 Address: “”
Example: H323 Profile 1 H323Alias ID: “firstname.surname@company.com”
Network [1..1] IEEE8021X AnonymousIdentity: <S: 0, 64>
H323 Profile [1..1] PortAllocation: <Dynamic/Static>
The H.323 Port Allocation setting affects the H.245 port numbers used for H.323 call signalling.
The 802.1X Anonymous ID string is to be used as unencrypted identity with EAP types that support
different tunneled identity, like EAP-PEAP and EAP-TTLS. If set, the anonymous ID will be used for the initial
(unencrypted) EAP Identity Request.
Dynamic: The system will allocate which ports to use when opening a TCP connection. The reason for doing
this is to avoid using the same ports for subsequent calls, as some firewalls consider this as a sign of attack.
When Dynamic is selected, the H.323 ports used are from 11000 to 20999. Once 20999 is reached they
restart again at 11000. For RTP and RTCP media data, the system is using UDP ports in the range 2326 to
2487. Each media channel is using two adjacent ports, ie 2330 and 2331 for RTP and RTCP respectively.
The ports are automatically selected by the system within the given range. Firewall administrators should not
try to deduce which ports are used when, as the allocation schema within the mentioned range may change
without any further notice.
Format: String with a maximum of 64 characters.
Example: Network 1 IEEE8021X AnonymousIdentity: “”
Network [1..1] IEEE8021X Eap Md5: <On/Off>
Message-Digest algorith 5. Is a Challenge Handshake Authentication Protocol that relies on a shared secret.
MD5 is a Weak security. EAP - Extensible Authentication Protocol. MD5 - Message Digest Algorithm 5.
Static: When set to Static the ports are given within a static predefined range [5555–6555].
On: The EAP-MD5 protocol is enabled. Default mode is On.
Off: The EAP-MD5 protocol is disabled.
Example: H323 Profile 1 PortAllocation: Dynamic
Example: Network 1 IEEE8021X Eap Md5: On
D14324.04—DECEMBER 2009
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Network settings, continued...
Network [1..1] IEEE8021X Eap Peap: <On/Off>
The Network settings, continued...
Network [1..1] IPv4 Gateway: <S: 0, 64>
Protected Transport Layer Security. Developed by Microsoft, Cisco and RSA Security. Authenticates LAN
clients without the need for client certificates. EAP - Extensible Authentication Protocol. PEAP - Protected
Extensible Authentication Protocol.
Defines the IP default gateway. Only applicable if Static IP assignment is chosen.
Format: Compact string with a maximum of 64 characters.
Example: Network 1 IPv4 Gateway: “10.47.5.100”
On: The EAP-PEAP protocol is enabled. Default mode is On.
Off: The EAP-PEAP protocol is disabled.
Network [1..1] IPv4 SubnetMask: <S: 0, 64>
Defines the IP subnet mask. Only applicable if Static IP assignment is chosen.
Example: Network 1 IEEE8021X Eap Peap: On
Format: Compact string with a maximum of 64 characters.
Network [1..1] IEEE8021X Eap TTLS: <On/Off>
Example: Network 1 IPv4 SubnetMask: “255.255.255.0”
Tunneled Transport Layer Security. Developed by Funk Software and Certicom. Usually supported by
Agere Systems, Proxim and Avaya. Authenticates LAN clients without the need for client certificates. EAP -
Extensible Authentication Protocol. TTLS - Tunneled Transport Layer Security.
Network [1..1] IPv4 QoS Mode: <Off/Diffserv>
On: The EAP-TTLS protocol is enabled. Default mode is On.
Off: The EAP-TTLS protocol is disabled.
Defines whether IP Diffserv QoS should be used. The QoS (Quality of Service) is a method which
handles the priority of audio, video and data in the network. The QoS settings must be supported by the
infrastructure. DiffServ (Differentiated Services) is a computer networking architecture that specifies a
simple, scalable and coarse-grained mechanism for classifying, managing network traffic and providing
QoS priorities on modern IP networks.
Example: Network 1 IEEE8021X Eap TTLS: On
Network [1..1] IEEE8021X Identity: <S: 0, 64>
The 802.1X Identity is the user name needed for 802.1X authentication.
Format: String with a maximum of 64 characters.
Off: When set to Off no QoS method is used.
Diffserv: Select Diffserv and then go to the Diffserv sub-menus (Audio, Data, Signalling and Video) to
configure these settings.
Example: Network 1 IPv4 QoS Mode: diffserv
Example: Network 1 IEEE8021X Identity: “”
Network [1..1] IPv4 QoS Diffserv Audio: <0..63>
Network [1..1] IEEE8021X Mode: <On/Off>
The DiffServ Audio setting is used to define which priority Audio packets should have in an IP network.
Enter a priority, which ranges from 0 to 63 for the packets. The higher the number, the higher the priority.
These priorities might be overridden when packets are leaving the network controlled by the local network
administrator.
The system may be connected to an IEEE 802.1X LAN network with a port-based network access control
that is used to provide authenticated network access for Ethernet networks.
On: The 802.1X authentication is enabled.
Off: The 802.1X authentication is disabled. Default mode is Off.
Audio: A recommended value is DiffServ Code Point (DSCP) is AF41, which equals the value 34. If in doubt,
contact your network administrator. Range: 0-63
Example: Network 1 IEEE8021X Mode: Off
Example: Network 1 IPv4 QoS Diffserv Audio: 0
Network [1..1] IEEE8021X Password: <S: 0, 32>
The 802.1X Password is the password needed for 802.1X authentication.
Format: String with a maximum of 32 characters.
Network [1..1] IPv4 QoS Diffserv Data: <0..63>
The DiffServ Data setting is used to define which priority Data packets should have in an IP network.
Enter a priority, which ranges from 0 to 63 for the packets. The higher the number, the higher the priority.
These priorities might be overridden when packets are leaving the network controlled by the local network
administrator.
Example: Network 1 IEEE8021X Password: “***”
Data: A recommended value is DiffServ Code Point (DSCP) AF23, which equals the value 22. If in doubt,
contact your network administrator. Range: 0-63
Network [1..1] IPv4 Address: <S: 0, 64>
Defines the Static IP address for the system. Only applicable if Static IP assignment is chosen.
Example: Network 1 IPv4 QoS Diffserv Data: 0
Format: Compact string with a maximum of 64 characters.
Example: Network 1 IPv4 Address: “10.47.5.100”
D14324.04—DECEMBER 2009
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Network settings, continued...
Network [1..1] IPv4 QoS Diffserv Signalling: <0..63>
The Network settings, continued...
Network [1..1] TrafficControl Mode: <On/Off>
The DiffServ Signalling setting is used to define which priority Signalling packets should have in an IP
network. Enter a priority, which ranges from 0 to 63 for the packets. The higher the number, the higher the
priority. These priorities might be overridden when packets are leaving the network controlled by the local
network administrator.
Configure how video packets transmission speed shall be controlled.
On: Transmit video packets at maximum 20Mbps. Can be used to smooth out bursts in the outgoing
network traffic.
Off: Transmit video packets at link speed.
Signalling: A recommended value is DiffServ Code Point (DSCP) AF31 which equals the value 26. If in
doubt, contact your network administrator.
Example: Network 1 TrafficControl: On
Range: 0-63
Example: Network 1 IPv4 QoS Diffserv Signalling: 0
The Network Services settings
Network [1..1] IPv4 QoS Diffserv Video: <0..63>
The DiffServ Video setting is used to define which priority Video packets should have in an IP network.
Enter a priority, which ranges from 0 to 63 for the packets. The higher the number, the higher the priority.
These priorities might be overridden when packets are leaving the network controlled by the local network
administrator.
NetworkServices H323 Mode: <On/Off>
Determines whether the system should be able to place and receive H.323 calls.
On: Set to On to enable the possibility to place and receive H.323 calls.This is the default setting.
Off: Set to Off to disable the possibility to place and receive H.323 calls.
NOTE! Changes in this setting requires the codec to be restarted.
Video: A recommended value is DiffServ Code Point (DSCP) AF41, which equals the value 34. If in doubt,
contact your network administrator.
Range: 0-63
Example: Network 1 IPv4 QoS Diffserv Video: 0
Example: NetworkServices H323 Mode: On
Network [1..1] MTU: <400..1500>
Set the ethernet MTU (Maximum Transmission Unit).
Range: 400-1500
NetworkServices HTTP Mode: <On/Off>
HTTP is a web-interface for system management, call management such as call transfer, diagnostics and
software uploads.
On: The HTTP protocol is enabled.
Off: The HTTP protocol is disabled.
Example: Network 1 MTU: 1500
Example: NetworkServices HTTP Mode: On
Network [1..1] Speed: <Auto/10half/10full/100half/100full/1000full>
Set the ethernet link speed.
NetworkServices HTTPS Mode: <On/Off>
Auto: Autonegotiate link speed.
HTTPS is a Web protocol that encrypts and decrypts user page requests as well as the pages that are
returned by the Web server.
10half: Force link to 10Mbps half-duplex.
10full: Force link to 10Mbps full-duplex.
100half: Force link to 100Mbps half-duplex.
100full: Force link to 100Mbps full-duplex.
1000full: Force link to 1Gbps full-duplex.
On: The HTTPS protocol is enabled.
Off: The HTTPS protocol is disabled.
Example: NetworkServices HTTPS Mode: On
Example: Network 1 Speed: Auto
NetworkServices NTP Address: <S: 0, 64>
Enter the NTP Address to define the network time protocol server address. This address will be used if NTP
Mode is set to Manual, or if set to Auto and no address is supplied by a DHCP server.
Format: String with a maximum of 64 characters.
Example: NetworkServices NTP Address: “1.tandberg.pool.ntp.org”
D14324.04—DECEMBER 2009
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Network Services settings, continued...
The Network Services settings, continued...
NetworkServices NTP Mode: <Auto/Manual>
NetworkServices SNMP Mode: <Off/ReadOnly/ReadWrite>
The Network Time Protocol (NTP) is used to synchronize the time of the system to a reference time server.
The time server will subsequently be queried every 24th hour for time updates. The time will be displayed
on the top of the screen. The system will use the time to timestamp messages transmitted to Gatekeepers
or Border Controllers requiring H.235 authentication. The system will use the time to timestamp messages
transmitted to Gatekeepers or Border Controllers that requires H.235 authentication. It is also used for
timestamping Placed Calls, Missed Calls and Received Calls.
SNMP (Simple Network Management Protocol) is used in network management systems to monitor
network-attached devices (routers, servers, switches, projectors, etc) for conditions that warrant
administrative attention. SNMP exposes management data in the form of variables on the managed
systems, which describe the system configuration. These variables can then be queried (set to ReadOnly)
and sometimes set (set to ReadWrite) by managing applications.
Off: Set to Off when you want to disable the SNMP network service.
Auto: The system will use the NTP server, by which address is supplied from the DHCP server in the
network. If no DHCP server is used, or the DHCP server does not provide the system with a NTP server
address, the system will use the static defined NTP server address specified by the user.
ReadOnly: Set to ReadOnly when you want to enable the SNMP network service for queries only.
ReadWrite: Set to ReadOnly when you want to enable the SNMP network service for both queries and
commands.
Manual: The system will always use the static defined NTP server address specified by the user.
Example: NetworkServices SNMP Mode: ReadWrite
Example: NetworkServices NTP Mode: Manual
NetworkServices SNMP SystemContact: <S: 0, 50>
Enter the name of the Network Services SNMP System Contact.
Format: String with a maximum of 50 characters.
NetworkServices SIP Mode: <On/Off>
Determines whether the system should be able to place and receive SIP calls.
On: Set to On to enable the possibility to place and receive SIP calls.This is the default setting.
Off: Set to Off to disable the possibility to place and receive SIP calls.
NOTE! Changes in this setting requires the codec to be restarted.
Example: NetworkServices SNMP SystemContact: “”
NetworkServices SNMP SystemLocation: <S: 0, 50>
Enter the name of the Network Services SNMP System Location.
Format: String with a maximum of 50 characters.
Example: NetworkServices SIP Mode: On
NetworkServices SNMP CommunityName: <S: 0, 50>
Example: NetworkServices SNMP SystemLocation: “”
Enter the name of the Network Services SNMP Community. SNMP Community names are used to
authenticate SNMP requests. SNMP requests must have a ‘password’ (case sensitive) in order to receive a
response from the SNMP Agent in the codec. The default password is “public”. If you have the TANDBERG
Management Suite (TMS) you must make sure the same SNMP Community is configured there too. Note!
The SNMP Community password is case sensitive.
NetworkServices Telnet Mode: <On/Off>
Telnet is a network protocol used on the Internet or local area network (LAN) connections.
On: The Telnet protocol is enabled.
Format: String with a maximum of 50 characters.
Off: The Telnet protocol is disabled. This is the default factory setting.
Example: NetworkServices SNMP CommunityName: “public”
Example: NetworkServices Telnet Mode: Off
NetworkServices SNMP Host [1..3] Address: <S: 0, 64>
Enter the address of up to three SNMP Managers. All traps will then be sent to the hosts listed.
The system’s SNMP Agent (in the codec) responds to requests from SNMP Managers (a PC program etc.).
SNMP Traps are generated by the SNMP Agent to inform the SNMP Manager about important events. Can
be used to send event created messages to the SNMP agent about different events like: system reboot,
system dialing, system disconnecting, MCU call, packet loss etc. Traps can be sent to multiple SNMP Trap
Hosts.
Format: String with a maximum of 64 characters.
Example: NetworkServices SNMP Host 1 Address: “”
D14324.04—DECEMBER 2009
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Phonebook settings
The Provisioning settings, continued...
Phonebook Server [1..5] ID: <S: 0, 64>
Provisioning Mode: <Off/TMS>
Enter a name for the external phonebook. Addresses the specific phonebook.
Provides the possibility of managing the codec (endpoint) by using an external manager/management
system.
Format: String with a maximum of 64 characters.
Off: The system will not try to register to any management system.
Example: Phonebook Server 1 ID: “”
TMS: If set to TMS the system will try to register with a TMS server as described in Provisioning
ExternalManager settings. TMS is short for TANDBERG Management System. Please contact your
TANDBERG representative for more information.
Phonebook Server [1..5] URL: <S: 0, 255>
Enter the address (URL) to the external phonebook server. Addresses the specific phonebook server.
Example: Provisioning Mode: TMS
Format: String with a maximum of 255 characters.
Example: Phonebook Server 1 URL: “http://tms.company.com/tms/public/external/
phonebook/phonebook.asmx”
The Provisioning settings
The Serial Port settings
Provisioning ExternalManager Address: <S: 0, 64>
SerialPort BaudRate: <9600/19200/38400/57600/115200>
Specifies the IP Address to the External Manager/Management system. If an External Manager address
and a path is configured, the system will post an HTTP message to this address when starting up.
When receiving this HTTP posting the External Manager (typically a management system) can return
configurations/commands to the unit as a result. If the DHCP Option 242 is returned in the DHCP response
from the DHCP server the system will interpret this as the External Manager address to use.
Specify the baud rate (bps) on the COM port (data port). The default value is 38400.
Other default parameters for the COM port are: Parity: None Databits: 8 Stopbits: 1 Flow control: None.
Valid inputs for baud rate: 9600, 19200, 38400, 57600, 115200 bits/second.
Format: String with a maximum of 64 characters.
Example: SerialPort BaudRate: 38400
Example: Provisioning ExternalManager Address: “”
SerialPort LoginRequired: <On/Off>
The Serial Login setting determines whether or not there should be a login when connecting to the COM
port (data port).
Provisioning ExternalManager Path: <S: 0, 255>
Specifies the path to the External Manager/Management system. If an External Manager address and a path
is configured, the system will post an HTTP message to this address when starting up. When receiving this
HTTP posting the External Manager (typically a management system) can return configurations/commands
to the unit as a result. If the DHCP Option 242 is returned in the DHCP response from the DHCP server the
system will interpret this as the External Manager address to use.
On: Login is required when connecting to the COM port (data port).
Off: The user can access the COM port (data port) without any login.
Example: SerialPort LoginRequired: On
Format: String with a maximum of 255 characters.
Example: Provisioning ExternalManager Path: “tms/public/external/management/
SystemManagementService.asmx”
D14324.04—DECEMBER 2009
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The SIP Profile settings
The SIP Profile settings, continued...
SIP Profile [1..1] Authentication [1..1] LoginName: <S: 0, 50>
SIP Profile [1..1] Proxy [1..4] Discovery: <Auto/Manual>
This is the user name part of the credentials used to authenticate towards the SIP proxy.
Manual: When Manual is selected, the manually configured SIP Proxy address will be used
Format: String with a maximum of 50 characters.
Auto: When Auto is selected, the SIP Proxy address is obtained using Dynamic Host Configuration Protocol
(DHCP).
Example: SIP Profile 1 Authentication 1 LoginName: “”
Example: SIP Profile 1 Proxy 1 Discovery: Manual
SIP Profile [1..1] Authentication [1..1] Password: <S: 0, 50>
This is the password part of the credentials used to authenticate towards the SIP proxy.
Format: String with a maximum of 50 characters.
SIP Profile [1..1] Type: <Standard/Alcatel/Avaya/Cisco/Microsoft/Nortel/Experimental/
Siemens>
Enables SIP extensions and special behaviour for a vendor or provider
Example: SIP Profile 1 Authentication 1 Password:
Standard: Should be used when registering to standard SIP proxy like OpenSer.
Alcatel: Must be used when registering to a Alcatel-Lucent OmniPCX Enterprise R7 or later.
Avaya: Must be used when registered to a Avaya Communication Manager.
Cisco: Must be used when registering to a Cisco CallManager version 5 or later.
Microsoft: Must be used when registering to a Microsoft LCS or OCS server.
Nortel: Must be used when registering to a Nortel MCS 5100 or MCS 5200 PBX.
Experimental: Can be used if auto is not working Note! This mode is for testing purposes only.
SIP Profile [1..1] DefaultTransport: <UDP/TCP/TLS/Auto>
Select the transport protocol to be used over the LAN.
UDP: The system will always use UDP as the default transport method.
TCP: The system will always use TCP as the default transport method.
TLS: The system will always use TLS as the default transport method. For TLS connections a SIP CA-list
can be uploaded using the web interface. If no such CA-list is available on the system then anonymous Diffie
Hellman will be used.
Example: SIP Profile 1 Type: Standard
Auto: The system will try to connect using transport protocols in the following order: TLS, TCP, UDP.
SIP Profile [1..1] URI: <S: 0, 255>
Example: SIP Profile 1 DefaultTransport: Auto
The SIP URI or number is used to address the system. This is the URI that is registered and used by the
SIP services to route inbound calls to the system. A Uniform Resource Identifier (URI) is a compact string of
characters used to identify or name a resource.
SIP Profile [1..1] Outbound: <On/Off>
The client initiated connections mechanism for firewall traversal, connection reuse and redundancy. The
Format: Compact string with a maximum of 255 characters.
Example: SIP Profile 1 URI: “sip:name@example.com”
On: Set up multiple outbound connections to servers in the Proxy Address list.
Off: Connect to the single proxy configured first in Proxy Address list.
Example: SIP Profile 1 Outbound: Off
SIP Profile [1..1] Proxy [1..4] Address: <S: 0, 255>
The Proxy Address is the manually configured address for the outbound proxy. It is possible to use a fully
qualified domain name, or an IP address. The default port is 5060 for TCP and UDP but another one can be
provided. If Outbound is enabled, multiple proxies can be addressed.
Format: Compact string with a maximum of 255 characters.
Example: SIP Profile 1 Proxy 1 Address: “”
D14324.04—DECEMBER 2009
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Standby settings
The System Unit settings
Standby BootAction: <None/Preset1/Preset2/Preset3/Preset4/Preset5/Preset6/
Preset7/Preset8/Preset9/Preset10/Preset11/Preset12/Preset13/Preset14/Preset15/
RestoreCameraPosition/DefaultCameraPosition>
SystemUnit CallLogging Mode: <On/Off>
Enables/disables logging of calls received or placed by the system. The call logs may then be viewed via the
GUI or using the xHistory command.
Decide what the system is going to do on boot.
None: No action.
On: Enable logging.
Off: Disable logging.
Preset 1..15: Activate the selected preset.
Example: SystemUnit CallLogging Mode: On
RestoreCameraPosition: Set the camera to the position it had before the last boot.
DefaultCameraPosition: Set the camera to the factory default position.
SystemUnit IrSensor Mode: <On/Off/Auto>
Example: Standby BootAction: DefaultCameraPosition
The System Unit IR Sensor setting determines whether the infrared receiver on the codec should be enabled
or not. The IR sensor LED is located in the front of the codec and flickers when an ir signal is received from
the remote control.
Standby Control: <On/Off>
Determine whether the system should go into standby mode or not.
On: Set to On to enable the IR sensor on the codec.
Off: Set to Off to disable the IR sensor on the codec.
On: Enter standby mode when the Standby Delay has timed out. Requires the Standby Delay to be set to an
appropriate value.
Auto: The system will automatically disable the IR sensor on the codec if the IR sensor at camera is enabled.
Otherwise the IR sensor on the codec will be enabled.
Off: Not entering standby mode.
Example: SystemUnit IrSensor Mode: On
Example: Standby Control: On
SystemUnit MenuLanguage: <English/Norwegian/Swedish/German/French/Italian/
Japanese/Russian/Spanish/Korean/Finnish/ChineseSimplified/ChineseTraditional/
PortugueseBrazilian/Turkish/Polish>
Standby Delay: <1..480>
Define how long (in minutes) the system shall be in idle mode before it goes into standby mode. Requires
the Standby Control to be enabled.
Select a language for the menus on screen.
Range: 1-480 minutes
Example: SystemUnit MenuLanguage: English
Example: Standby Delay: 10
SystemUnit Name: <S: 0, 50>
Enter a System Name to define a name of the system unit. If the H.323 Alias ID is configured on the system
then this ID will be used instead of the system name. The system name will be displayed:
Standby StandbyAction: <None/PrivacyPosition>
The setting determines what the system is going to do when going into standby mode.
None: No action.
* When the codec is acting as an SNMP Agent
* Towards a DHCP server
PrivacyPosition: Turns the camera to a sideways position for privacy.
Example: Standby StandbyAction: PrivacyPosition
Format: String with a maximum of 50 characters.
Example: SystemUnit Name: “Meeting Room Name”
Standby WakeupAction: <None/Preset1/Preset2/Preset3/Preset4/Preset5/Preset6/
Preset7/Preset8/Preset9/Preset10/Preset11/Preset12/Preset13/Preset14/Preset15/
RestoreCameraPosition/DefaultCameraPosition>
Decide what the system is going to do when leaving standby mode.
None: No action.
Preset 1..15: Activate the selected preset.
RestoreCameraPosition: Set the camera to the position it had before entering standby.
DefaultCameraPosition: Set the camera to the factory default position.
Example: Standby WakeupAction: RestoreCameraPosition
D14324.04—DECEMBER 2009
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Time settings
The Time settings, continued...
GMT-03:00 (Greenland)
GMT-03:00 (Brasilia)
Time DateFormat: <DD_MM_YY/MM_DD_YY/YY_MM_DD>
Specifies the date format.
GMT-02:00 (Mid-Atlantic)
GMT-01:00 (Cape Verde Is.)
GMT-01:00 (Azores)
DD_MM_YY: The date January 30th 2009 will be displayed: 30.01.09
MM_DD_YY: The date January 30th 2009 will be displayed: 01.30.09
YY_MM_DD: The date January 30th 2009 will be displayed: 09.01.30
GMT (Casablanca, Monrovia)
Example: Time DateFormat: DD_MM_YY
GMT (Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London)
GMT+01:00 (West Central Africa)
GMT+01:00 (Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna)
GMT+01:00 (Brussels, Copenhagen, Madrid, Paris)
GMT+01:00 (Sarajevo, Skopje, Warsaw, Zagreb)
GMT+01:00 (Belgrade, Bratislava, Budapest, Ljubljana, Prague)
GMT+02:00 (Harare, Pretoria)
Time TimeFormat: <24H/12H>
Specifies the time format.
24H: Set the time format to 24 hours.
12H: Set the time format to 12 hours (AM/PM).
Example: Time TimeFormat: 24H
GMT+02:00 (Jerusalem)
Time Zone: <See the value space list>
Specifies the time zone where the system is located, using Windows time zone description format.
GMT+02:00 (Athens, Istanbul, Minsk)
GMT+02:00 (Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius)
GMT+02:00 (Cairo)
Value space list:
GMT-12:00 (International Date Line West)
GMT-11:00 (Midway Island, Samoa)
GMT-10:00 (Hawaii)
GMT+02:00 (Bucharest)
GMT+03:00 (Nairobi)
GMT+03:00 (Kuwait, Riyadh)
GMT-09:00 (Alaska)
GMT+03:00 (Moscow, St. Petersburg, Volgograd)
GMT+03:00 (Baghdad)
GMT-08:00 (Pacific Time (US & Canada) Tijuana)
GMT-07:00 (Arizona)
GMT+03:30 (Tehran)
GMT-07:00 (Mountain Time (US & Canada))
GMT-07:00 (Chihuahua, La Paz, Mazatlan)
GMT-06:00 (Central America)
GMT+04:00 (Abu Dhabi, Muscat)
GMT+04:00 (Baku, Tbilisi, Yerevan)
GMT+04:30 (Kabul)
GMT-06:00 (Saskatchewan)
GMT+05:00 (Islamabad, Karachi, Tashkent)
GMT+05:00 (Ekaterinburg)
GMT-06:00 (Guadalajara, Mexico City, Monterrey)
GMT-06:00 (Central Time (US & Canada))
GMT-05:00 (Indiana (East))
GMT+05:30 (Chennai, Kolkata, Mumbai, New Delhi)
GMT+05:45 (Kathmandu)
GMT-05:00 (Bogota, Lima, Quito)
GMT-05:00 (Eastern Time (US & Canada))
GMT-04:30 (Caracas)
GMT+06:00 (Sri Jayawardenepura)
GMT+06:00 (Astana, Dhaka)
GMT+06:00 (Almaty, Novosibirsk)
GMT+06:30 (Rangoon)
GMT-04:00 (La Paz)
GMT-04:00 (Santiago)
GMT+07:00 (Bangkok, Hanoi, Jakarta)
GMT+07:00 (Krasnoyarsk)
GMT-04:00 (Atlantic Time (Canada))
GMT-03:30 (Newfoundland)
GMT+08:00 (Perth)
GMT-03:00 (Buenos Aires, Georgetown)
GMT+08:00 (Taipei)
D14324.04—DECEMBER 2009
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Time settings, continued...
The Video settings
GMT+08:00 (Kuala Lumpur, Singapore)
GMT+08:00 (Beijing, Chongqing, Hong Kong, Urumqi)
GMT+08:00 (Irkutsk, Ulaan Bataar)
GMT+09:00 (Osaka, Sapporo, Tokyo)
GMT+09:00 (Seoul)
Video DefaultPresentationSource: <1..3>
Define which video input source shall be used as the default presentation source (e.g. when you press the
Presentation key on the remote control). The input source is configured to a video input connector.
Range: 1-3 presentation sources
Example: Video DefaultPresentationSource: 3
GMT+09:00 (Yakutsk)
GMT+09:30 (Darwin)
Video Encoder Threshold60fps: <0..6000>
GMT+09:30 (Adelaide)
If the bandwidth used for transmitting video is above or equal to this threshold, the system will select the
highest video resolution possible while maintaining 60 fps. If below this threshold, the system will select the
highest video resolution possible while maintaining 30fps.
GMT+10:00 (Guam, Port Moresby)
GMT+10:00 (Brisbane)
NOTE: This setting will only apply when the video input source to be transmitted is a 60fps source, and the
selected video input is configured for motion.
GMT+10:00 (Vladivostok)
GMT+10:00 (Hobart)
Range: 0-6000 kbps
GMT+10:00 (Canberra, Melbourne, Sydney)
GMT+11:00 (Magadan, Solomon Is., New Caledonia)
GMT+12:00 (Fiji, Kamchatka, Marshall Is.)
GMT+12:00 (Auckland, Wellington)
GMT+13:00 (Nuku alofa)
Example: Video Encoder Threshold60fps: 2048
Video Input DVI [2..3] Type: <AutoDetect/Digital/AnalogRGB/AnalogYPbPr>
The official DVI standard supports both digital and analog signals. In most cases the default AutoDetect
setting can detect whether the signal is analog RGB or digital. However, in some rare cases when DVI-I
cables are used (these cables can carry both the analog and digital signals) this detection might fail. This
setting makes it possible to override the AutoDetect and select the correct DVI video input.
Example: Time Zone: “GMT (Greenwich Mean Time : Dublin, Edinburgh, Lisbon,
London)”
This setting should also be used if the video input is an analog component (YPbPr) type signal. This is
used by some cameras (Sony EVI-HD1) and DVD/Blu-ray players. Since it is not possible to auto detect the
difference between AnalogRGB and AnalogYPbPr, the Analog YPbPr setting has to be selected.
AutoDetect: Set to AutoDetect to automatically detect if the signal is analog RGB or digital.
Digital: Set to Digital to force the DVI video input to Digital when using DVI-I cables with both analog and
digital pins and AutoDetect fails.
AnalogRGB: Set to AnalogRGB to force the DVI video input to AnalogRGB when using DVI-I cables with
both analog and digital pins and AutoDetect fails.
AnalogYPbPr: Set to AnalogYPbPr to force the DVI video input to AnalogYPbPr, as the component (YPbPr)
signal cannot be auto detected.
Example: Video Input DVI 2 Type: AutoDetect
Video Input Source [1..3] CameraControl CameraId: <1..5>
Select the ID of the camera in the Visca chain that is connected to this camera source. The CameraId
setting represents the camera’s position in the Visca chain. Addresses the specific video input source.
Cascaded cameras and Visca commands are described in the PrecisionHD 1080p User Guide. The user
Example: Video Input Source 1 CameraControl CameraId: 1
D14324.04—DECEMBER 2009
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Video settings, continued...
Video Input Source [1..3] CameraControl Mode: <On/Off>
The Video settings, continued...
Video Input Source [1..3] Quality: <Motion/Sharpness>
Determines whether or not the camera control should be enabled for the specific video input source.
Addresses the specific video input source.
When encoding and transmitting video there will be a tradeoff between high resolution and high framerate.
For some video sources it is more important to transmit high framerate than high resolution and vice versa.
The Quality setting specifies whether to give priority to high frame rate or to high resolution for a given
source. Addresses the selected video input connector.
On: Set to On to enable camera control for the camera connected to the selected video input connector.
Off: Set to Off to disable camera control for the camera connected to the selected video input connector.
Motion: Gives the highest possible framerate. Used when there is a need for higher frame rates, typically
when a large number of participants are present or when there is a lot of motion in the picture.
Example: Video Input Source 1 CameraControl Mode: On
Sharpness: Gives the highest possible resolution. Used when you want the highest quality of detailed
images and graphics.
Video Input Source 1 Connector: <HDMI>
Example: Video Input Source 1 Quality: Motion
Select which video input connector to be active on connector group 1
HDMI: Select HDMI when you want to use the HDMI 1 connector as input
Video Layout ScaleToFrame: <Manual/MaintainAspectRatio/StretchToFit>
Example: Video Input Source 1 Connector: HDMI
Defines what to do if the aspect ratio of a video input source doesn’t match the aspect ratio of the
corresponding image frame in a composition. For example if you have a 4:3 input source (like XGA) to be
displayed on a 16:9 output (like HD720).
Video Input Source 2 Connector: <HDMI/DVI>
Select which video input connector to be active on connector group 2
HDMI: Select HDMI when you want to use the HDMI 2 connector as input
DVI: Select DVI-I when you want to use the DVI-I 3 connector as input
Manual: If the difference in aspect ratio between the video input source and the target image frame is less
than the ScaleToFrameThrshold configuration (in percent), the image is stretched to fit. Unless the system
will maintain the original aspect ratio.
MaintainAspectRatio: Will maintain the aspect ratio of the input source, and fill in black in the rest of the
frame (letter boxing or pillar boxing).
Example: Video Input Source 2 Connector: HDMI
StretchToFit: Will stretch (horizontally or vertically) the input source to fit into the image frame.
Video Input Source 3 Connector: <DVI/Composite/YC>
Select which video input connector to be active on connector group 3
DVI: Select DVI-I when you want to use the DVI-I 3 connector as input.
Example: Video Layout ScaleToFrame: MaintainAspectRatio
Video Layout ScaleToFrameTreshold: <0..100>
YC: Select YC when you want to use the S-Video (YC) input. Connect the S-Video input to the connector
marked as Y/Comp and C. NOTE! This configuration is not supported in version 1.
Only applicable if the ScaleToFrame configuration is set to manual. If the difference in aspect ratio between
the video input source and the target image frame is less than the ScaleToFrameThrshold configuration (in
percent), the image is stretched to fit. Unless the system will maintain the original aspect ratio.
Composite: Select Comp when you want to use the Composite input. Connect the Composite input to the
connector marked
Example: Video Layout ScaleToFrameTreshold: 5
Example: Video Input Source 3 Connector: DVI
Video Layout Scaling: <On/Off>
Defines whether the system should automatically adjust aspect ratio for images or frames when it differs
between the image and the frame it is to be placed in.
Video Input Source [1..3] Name: <S: 0, 50>
Customizable name of the connector group. Enter the name of the video input source 1-3.
Format: String with a maximum of 50 characters.
On: Let the system automatically adjust aspect ratio.
Off: Do not do any aspect ratio changes automatically.
Example: Video Input Source 1 Name: “”
Example: Video Layout Scaling: On
D14324.04—DECEMBER 2009
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Video settings, continued...
The Video settings, continued...
Video MainVideoSource: <1..3>
Define which video input source shall be used as the main video source. The input source is configured to a
video input connector.
Video Output HDMI [1..1] Resolution: <Auto/640_480_60/800_600_60/1024_768_60/1280_
1024_60/1280_720_60/1920_1080_60/1280_768_60/1360_768_60/1366_768_60/1600_1200_60
/1920_1200_60>
Select the preferred resolution for the monitor connected to HDMI video output. This will force the selected
resolution on the monitor.
Range: 1-3 video sources
Example: Video MainVideoSource: 1
Auto: The system will automatically try to set the optimal resolution based on negotiation with the connected
monitor.
Video Monitors: <Single/Dual>
The codec can be used with more than one monitor and this setting lets you set the codec’s monitor layout
mode to Single or Dual.
Range: 640x480@60p, 800x600@60p, 1024x768@60p, 1280x1024@60p, 1280x720@60p,
1920x1080@60p, 1280x768@60p, 1360x768@60p, 1366x768@60p, 1600x1200@60p, 1920x1200@60p
Example: Video Output HDMI 1 Resolution: 1920_1080_60
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on two monitors.
Video Output DVI [2..2] MonitorRole: <First/Second/PresentationOnly/Third/Fourth>
Example: Video Monitors: Single
The monitor role describes what video stream will be shown on the monitor connected to the output
connector. Applicable only if the “Video > Monitors” configuration is set to dual.
First: Show main video stream.
Video OSD Mode: <On/Off>
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
The Video OSD (On Screen Display) Mode lets you define whether or not information and icons on screen
should be displayed.
On: Set to On to display the on screen menus, icons and indicators (microphone on/off, encryption on/off).
Off: Set to Off to hide the on screen menus, icons and indicators (microphone on/off, encryption on/off).
Example: Video Output DVI 2 MonitorRole: Second
Example: Video OSD Mode: On
Video Output DVI [2..2] Resolution: <Auto/640_480_60/800_600_60/1024_768_60/1280_1
024_60/1280_720_60/1920_1080_60/1280_768_60/1360_768_60/1366_768_60/1600_1200_60/
1920_1200_60>
Video OSD Output: <1..2>
The Video OSD (On Screen Display) Output lets you define which monitor should display the on screen
menus, information and icons. By default the OSD output is displayed on the first monitor.
Select the preferred resolution for the monitor connected to DVI-I video output. This will force the selected
resolution on the monitor.
Auto: The system will automatically try to set the optimal resolution based on negotiation with the connected
monitor.
If you have a single monitor and you cannot see any OSD on the monitor: If the OSD output has been set to
the second monitor and the second monitor is not connected, then you cannot see any menus, information
or icons on the screen. To move the OSD output to the first monitor press the following shortcut sequence
on the remote control. Press the Disconnect key followed by: * # * # 0 x # (where x is output 1 or 2).
Range: 640x480@60p, 800x600@60p, 1024x768@60p, 1280x1024@60p, 1280x720@60p,
1920x1080@60p, 1280x768@60p, 1360x768@60p, 1366x768@60p, 1600x1200@60p, 1920x1200@60p
Example: Video Output DVI 2 Resolution: 1024_768_60
Example: Video OSD Output: 1
Video Output Composite [3] MonitorRole: <First/Second/PresentationOnly/Third/
Fourth>
Video Output HDMI [1..1] MonitorRole: <First/Second/PresentationOnly>
The monitor role describes what video stream will be shown on the monitor connected to the output
connector. Applicable only if the “Video > Monitors” configuration is set to dual.
The monitor role describes what video stream will be shown on the monitor connected to the output
connector. Applicable only if the monitor configuration is set to dual or quadruple.
First: Show main video stream.
First: Show main video stream.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
Third: Use for remote participants (only for quadruple monitor setup).
Fourth: Use for remote participants (only for quadruple monitor setup).
Example: Video Output HDMI 1 MonitorRole: First
Example: Video Output Composite 3 MonitorRole: First
D14324.04—DECEMBER 2009
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Video settings, continued...
Video Output Composite [3] Resolution: <PAL/NTSC>
Select the preferred resolution for the monitor connected to video output composite 3. This will force the
selected resolution on the monitor.
Range: PAL, NTSC
Example: Video Output Composite 3 Resolution: NTSC
Video Selfview: <On/Off>
The Video Selfview setting determines whether or not the main video source (selfview) should be displayed
on screen.
On: Set to On when you want selfview to be displayed on screen.
Off: Set to Off when you do not want selfview to be displayed on screen.
Example: Video Selfview: On
Video WallPaper: <None/Growing/Summersky/Custom>
The Video Wallpaper setting determines whether or not a background picture should be displayed on
screen when idle.
None: Set to None if you do not want a wallpaper to be displayed on screen.
Summersky, Growing: Select the wallpaper to be displayed on screen.
Custom: The custom wallpaper is uploaded from the web interface. Open a web browser and enter the IP
address of the codec. Select “Wallpaper” from the menu on top of the screen. Browse for the file and press
the “Upload” button. Toggle once between “None” and “Custom” wallpaper to make the change take effect.
See the Appendices section for further details about the web interface.
Example: Video Wallpaper: Summersky
D14324.04—DECEMBER 2009
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
We recommend you visit the TANDBERG web site regularly for updated versions of the manual.
The Experimental menu, cont...
The Advanced configurations menu has an option called Experimental. The settings within this menu can
be used ‘as is’ and will not be documented.
NOTE! The Experimenal menu WILL change.
Experimental Audio Equalizer [1..8] Section [1..6] a1: <S: 0, 32>
Sets the a1 coefficient for the given equalizer ID and section number.
Experimental Audio Input Line [1..4] Equalizer Mode: <On/Off>
Determines whether or not the selected equalizer is enabled.
On: Use the selected equalizer
The system has 8 user defined equalizers, each made up of 6 second order IIR sections. See the Appendix,
Equalizer section.
Off: No equalizer
Example: Experimental Audio Equalizer 1 Section 1 a1: “0.0”
Example: Experimental Audio Input Line 1 Equalizer Mode: Off
Experimental Audio Equalizer [1..8] Section [1..6] a2: <S: 0, 32>
Sets the a2 coefficient for the given equalizer ID and section number.
Experimental Audio Input Microphone [1..4] Channel: <Left/Right/Mono>
Defines whether the microphone input is a mono signal or part of a multichannel signal.
Left: The microphone input signal is the left channel of a stereo signal.
Right: The microphone input signal is the right channel of a stereo signal.
Mono: The microphone input signal is a mono signal.
The system has 8 user defined equalizers, each made up of 6 second order IIR sections. See the Appendix,
Equalizer section.
Example: Experimental Audio Equalizer 1 Section 1 a2: “0.0”
Example: Experimental Audio Input Microphone 1 Channel: Mono
Experimental Audio Equalizer [1..8] Section [1..6] b0: <S: 0, 32>
Sets the b0 coefficient for the given equalizer ID and section number.
Experimental Audio Input Microphone [1..4] EchoControl HighPassFilter: <On/Off>
Set the microphone echo control high pass filter to on/off.
The system has 8 user defined equalizers, each made up of 6 second order IIR sections. See the Appendix,
Equalizer section.
Example: Experimental Audio Input Microphone 1 EchoControl HighPassFilter: On
Example: Experimental Audio Equalizer 1 Section 1 b0: “0.0”
Experimental Audio Input Microphone [1..4] Equalizer ID: <1..8>
Select equalizer ID[1...8]
Experimental Audio Equalizer [1..8] Section [1..6] b1: <S: 0, 32>
Sets the b1 coefficient for the given equalizer ID and section number.
Example: Experimental Audio Input Microphone 1 Equalizer ID: 1
The system has 8 user defined equalizers, each made up of 6 second order IIR sections. See the Appendix,
Equalizer section.
Example: Experimental Audio Equalizer 1 Section 1 b1: “0.0”
Experimental Audio Input Microphone [1..4] Equalizer Mode: <On/Off>
Determines whether or not the selected equalizer is enabled.
On: Use the selected equalizer
Experimental Audio Equalizer [1..8] Section [1..6] b2: <S: 0, 32>
Off: No equalizer
Sets the b2 coefficient for the given equalizer ID and section number.
The system has 8 user defined equalizers, each made up of 6 second order IIR sections. See the Appendix,
Equalizer section.
Example: Experimental Audio Input Microphone 1 Equalizer Mode: Off
Example: Experimental Audio Equalizer 1 Section 1 b2: “0.0”
Experimental Audio Output Line [1..6] Equalizer ID: <1..8>
Select equalizer ID[1...8]
Experimental Audio Input Line [1..4] Equalizer ID: <1..8>
Select equalizer ID[1...8].
Example: Experimental Audio Output Line 1 Equalizer ID: 1
Example: Experimental Audio Input Line 1 Equalizer ID: 1
D14324.04—DECEMBER 2009
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The Experimental settings, continued...
Experimental Audio Output Line [1..6] Equalizer Mode: <On/Off>
Determines whether or not the selected equalizer is enabled.
On: Use the selected equalizer
Off: No equalizer
Example: Experimental Audio Output Line 1 Equalizer Mode: Off
Experimental CapsetFilter: <S: 0, 32>
To be described.
Example: Experimental CapsetFilter: “”
Experimental CustomSoftbuttons State [1..2] Softbutton [1..5] Type: <NotSet/
MainSource/PresentationSource/CameraPreset/Actions/SpeedDial>
To be described.
Example: Experimental CustomSoftbuttons State 1 Softbutton 1 Type: NotSet
Experimental CustomSoftbuttons State [1..2] Softbutton [1..5] Value: <S: 0, 255>
To be described.
Example: Experimental CustomSoftbuttons State 1 Softbutton 1 Value: “”
Experimental Video OptimalDefinition Profile: <Normal/Medium/High>
Video quality is determined by a combination of resolution and frame rate and varies based on bandwidth.
Normal, Medium, High: See the Video optimal definition tables below.
Table 1: For systems supporting 1080p
w288p30
256kbit/s
128kbit/s
128kbit/s
w448p30
512 kbit/s
384 kbit/s
256 kbit/s
w576p30
768 kbit/s
512 kbit/s
512 kbit/s
720p30
1080p30
Normal
Medium
High
1152 kbit/s
768 kbit/s
768 kbit/s
2560 kbit/s
1920 kbit/s
1472 kbit/s
Table 2: For systems supporting 720p60
w144p60
w288p60
512 kbit/s
384 kbit/s
256 kbit/s
w448p60
1152 kbit/s
768 kbit/s
512 kbit/s
w576p60
720p60
Normal
Medium
High
128kbit/s
128kbit/s
128kbit/s
1472 kbit/s
1152 kbit/s
768 kbit/s
2240 kbit/s
1472 kbit/s
1152 kbit/s
Example: Experimental Video OptimalDefinition Profile: Normal
D14324.04—DECEMBER 2009
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Chapter 8
Cameras
Your TANDBERG PrecisionHD 1080p
Camera has been designed to give you
many years of safe, reliable operation.
In this chapter...
The PrecisionHD 1080p camera
Connecting the camera
Best view—Face recognition
Video output formats
Additional information about the camera
is found in the TANDBERG PrecisionHD
1080p User Guide.
Cameras in daisy chain
D14324.04—DECEMBER 2009
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The PrecisionHD 1080p camera
Video out (HDMI, HD-SDI). For video signals, connect from the
video out on the camera to the video in on the codec.
The orange LED illuminates while in a
call and flickers when there is an
incoming call.
Power and camera control. For power in and camera control,
connect from the camera control & power on the camera to
the Camera port on the codec. When the camera is used with
TANDBERG codecs power will be supplied through Camera Control
cable. When used with non-TANDBERG Codecs, you may have to
connect power separately.
The lens hood is detachable.
We recommend that you
mount it to prevent stray light
from disturbing your video
experience.
HDMI and HD-SDI
Just snap it on gently.
•
•
•
HDMI is the main source for video out when connected to Codec
C60. Maximum resolution is 1080p60.
HD-SDI is the secondary source for video. Maximum resolution
is 1080p30.
The HDMI and HD-SDI can be used simultaneously. The
maximum resolution is then 1080p30 if you want both to run with
the same resolution.
Kensington lock
The Kensington lock may be used to prevent the camera to be
moved from its place or to prevent theft.
The green LED is continuously illuminated
when power is On, but it flickers when
receiving signals from the remote control.
NOTE: The green LED is hidden behind
the top grille on TANDBERG Profile 65”.
Disassemble the top grille to see the LED.
Cascaded cameras
The sockets named Extra Camera Out and Power In are used when
connecting cameras in daisy chain.
•
The first camera in the chain is powered up by the camera
control cable. The next cameras must use the 12V DC Power in.
HDMI and HD-SDI can be
used simultaneously.
•
The daisy chained cameras are connected by using an extra
camera cable between the Extra Camera sockets.
Kensington lock
Not Used
Power Supply
Camera Control
HDMI Video Out
See the TANDBERG PrecisionHD 1080p User Guide for
comprehensive information about the camera.
Extra Camera Out and for Daisy Chaining
HD-SDI Out
D14324.04—DECEMBER 2009
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The PrecisionHD 1080p
camera, cont...
Connecting the camera
The HDMI and HD-SDI can be used
simultaneously.
HDMI cable
The HDMI cable delivered with the camera is
5 meters.
Maximum length is 15 meter with a category 2
certified good quality HDMI cable.
HD-SDI cable
The HD-SDI cable must be purchased
separately. The maximum recommendable
length of HD SDI cable is 100m.
HDMI and HD-SDI
can be used simultaneously.
Connect the camera control cable, RJ45
to RS-232. Visca™ protocol is supported.
Connecting HDMI HD Video out on camera to HDMI 1 In on the Codec.
VISCA™ is a trademark of Sony Corporation
D14324.04—DECEMBER 2009
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The PrecisionHD 1080p camera,
cont...
Best view—Face recognition
This camera is capable of face recognition when used with
TANDBERG C60/C90 Codecs. Consequently, the functionality is
subject to change without prior notice in order to take advantage of
further developments.
NOTE: Observe that the Best view feature is still a preview feature.
The face recognition system aims to search for faces in order to
optimize the picture frame, hence the name Best view. Once a face
or group of faces has been detected camera zoom and camera angle
will be changed accordingly to obtain an optimal presentation on the
screen.
Read this before using Best view:
•
•
The Best view optimization process may take up to 5 seconds.
The detection of faces works better when people look towards the
camera.
•
•
The area from the eyebrows down to just below the lips should be
uncovered.
Using Best view
Note that Best view works with TANDBERG
C60/C90 Codecs only!
Beard is normally not a problem.
1. Press the
Layout key on the remote
control to display the Layout menu. Select
Selfview to be shown as required.
2. Press the
Home key on the remote
control to display the Home menu and
select Camera control
Select Selfview to be shown.
3. Press the second soft button on the remote
control to display the Preset menu. Select
Best view from the menu press the OK key
on the remote control to start the Best view
optimization process.
4. Look towards the camera for about five
seconds. The system will look for human
faces and adjust the zoom and camera
angle to obtain a best fit.
D14324.04—DECEMBER 2009
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The PrecisionHD 1080p camera,
cont...
Video output formats
This section describes the video output formats for the TANDBERG
PrecisionHD 1080p camera.
DIP Switch table for video formats
1
0
1
2
3
4
5
HDMI
HD-SDI
DIP switch settings for video output formats
0
0
0
0
0
Auto
The DIP switch
The DIP switch sets the video output format for the camera. The DIP
switch is on the underside of the camera. The default setting is Auto.
See the table to the right.
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
0
0
1
1
1
1
0
0
0
1
1
0
0
1
1
0
0
1
0
1
0
1
0
1
0
1
1920x1080p25
1920x1080p30
1920x1080p50
1920x1080p60
1280x720p25
1280x720p30
1280x720p50
1280x720p60
1920x1080p25
1920x1080p30
1280x720p50
1280x720p60
1280x720p25
1280x720p30
1280x720p50
1280x720p60
•
•
Maximum resolution for HDMI is 1080p60
Maximum resolution for HD-SDI is 1080p30.
Line voltage frequency
The camera will automatically detect the line voltage frequency when it
is 50 or 60Hz. If there is a different line voltage, you can set the video
output format to a specific value (use the DIP switches) to override the
auto frequency detection.
Set the PrecisionHD 1080p DIP switch (country specific setting):
Software control
•
•
50Hz: 00011, gives 1080p50 (720p50 for HD-SDI)
60Hz: 00100, gives 1080p60 (720p60 for HD-SDI)
The table shows the different settings available for the HDMI and
the HD-SDI outputs.
Underside side of the TANDBERG
PrecisionHD 1080p camera
Auto: Camera negotiates format over HDMI. HD-SDI tracks HDMI
and defaults to 1080p30 in absence of HDMI sync.
Software: For more on the Software control setting, read about
video mode selections in the TANDBERG PrecisionHD 1080p User
Guide.
D14324.04—DECEMBER 2009
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Chapter 7
Appendices
In this chapter...
General room guidelines
Meeting room setup
Remote control TRC5
Password protection
Startup scripts
The web interface
System info page
Software upgrade
Advanced configuration
Custom wallpaper
Making a call
Upload certificate
XML files
Logs
Add release key
The DNAM
Supported RFCs in SIP
China RoHS
CE Declaration
Dimensions
Technical specifications
D14324.04—DECEMBER 2009
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The room equipment
When placing and using the room equipment there are a few
recommendations and guidelines to consider.
Environmental considerations
This section explains how to carry out basic adjustments and simple
tests to ensure that you send and receive the best possible image and
audio quality when using your system.
General room guidelines
The physical conditions
When building a video meeting room, or using an existing room for
video meetings there are a few guidelines to consider.
The microphone
Iris control and lighting
•
The microphones should be evenly distributed on the table. Avoid
positions where they can be hidden behind obstacles like laptop,
projector or other equipment placed on the table
By default the system camera will use an automatic iris to compensate
for changes in lighting. In addition to this feature, you may further
assist the system to maintain the best possible image quality by
paying special attention to environmental lighting and background
colors as described below.
Lighting
•
Do not place a microphone close to noisy equipment like computer
and projector fans, power outlets or similar arrangements on the
table. The microphone will pick up noise from these arrangements
quite strongly.
•
The illumination should be distributed evenly in the room to obtain
low contrast
Remember the system will send live images of both yourself and your
immediate surroundings.
•
The ideal light intensity is a little higher than in an ordinary meeting
room. Typically, the luminous intensity should be 800–1400Lux,
measured at the table with an incident light meter
•
Avoid direct sunlight on the subject matter i.e. yourself, the
background or onto the camera lens as this will create harsh
contrasts
The camera
•
The camera should be able to “see” all participants in the room.
Use the pan, tilt and zoom features to adjust the picture
Seating area and table
•
•
Avoid placing the seatings in front of a window with natural
daylight, as this will make the faces of people very dark
•
•
The seating area and table should be non-shiny and non-patterned
The seating area should allow all participants to see the monitor
If light levels are too low you may need to consider using artificial
lighting. As described above, direct illumination of the subject
matter and camera lens should be avoided
The PC
•
PC’s placed on the table should not cover the microphones as this
will reduce the audio quality at the far end
Walls
•
•
•
When using artificial lighting, daylight type lamps will produce the
most effective results. Avoid colored lighting
•
The color of the wall should be in good contrast to skin tonality.
Light blue is a complementary color to skin tonality, it gives a good
contrast and is commonly used
Position of the system
Indirect light from shaded sources or reflected light from pale walls
often produces excellent results
•
Position the video system in such a way that all participants
attending the meeting are visible to the far end
•
Acoustically reflective surfaces (such as glass or concrete) should
be covered with curtains or sound treatment
Avoid harsh side lighting or strong light from above. Strong sunlight
from a window or skylight may put part or all of the subject matter
in shadow or cause silhouetting
•
If appropriate, the far end should be able to see people entering or
leaving the room
Audio
•
The Noise Floor (the sum of all the noise sources) should be less
than max 35dBA
Loudspeaker volume
The document camera
The audio system will use the Digital Natural Audio Module (DNAM)
which is integrated in the system. The volume of the audio is controlled
by the Volume key on the remote control.
•
The document camera should be close to the chair person or a
designated controller of the document camera for ease of use
Make sure this person is visible on screen while carry out the task
•
The reverberation time should be 0,3 to 0,5 seconds
Ventilation
•
When having a TANDBERG Profile system installed the
Other peripherals
requirements for ventilation is higher than in an ordinary meeting
room. See the Technical specifications section in the Appendices
to find the output values for your TANDBERG Profile.
•
Arrange all the peripherals so that the chair person can reach each
of them to point, change the display, DVD, and still be fully visible
on screen while carry out the task
•
•
Keep in mind the Noise Floor (see Audio)
Velocity creates noise, therefore keep velocity of air low
D14324.04—DECEMBER 2009
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The audio quality
To keep the high quality audio, make sure there is
free sight to the speaker module
The best audio quality to all participants
•
•
There should be free sight between the ears
of the participants and the system speaker
module
Participant sitting too far away from the video
system may not have the same audio quality as
the others.
The line of free sight
Ear height
This participant may not have
the same audio quality as the
others
Speaker module
Making eye contact
Natural communication
Making eye contact with the far end participants
will improve the natural communication between
the people
•
Adjust the camera view (using zoom in/out) to
allow the participants to be shown in full size
on screen, and to keep eye contact with each
other at the same eye level
HD Camera
The far end participants
•
If the participants are sitting too close to
the monitor the camera will “look down” at
the participants. This may not give a good
presentation of the participants at the far end.
Eye height
Monitor
D14324.04—DECEMBER 2009
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Guidelines for meeting room setup
For team collaboration rooms, team meeting rooms and showroom
floor.
General recommendations for the room layout
To fully utilize the experience there are some guidelines you should
consider.
The distance between the table and the video system
•
The monitors are full HD LCD display and requires some distance
to the table to allow all participants to see a clear picture on screen
•
•
The 42”/52” monitors requires minimum 1,5 m / 59 inch
The 65” monitor requires 2–2,5 m / 78–98 inch
Camera view
•
•
•
The camera should capture all participants in the room.
The camera angle at maximum zoom out is 72°.
- with max zoom
out
Microphones
Adjust the camera view (using zoom in/out) to allow the
participants to be shown in full size on screen, and to keep eye
contact with each other at the same eye level
Remote
control
•
If the participants are sitting too close to the monitor the camera
will “look down” at the participants. This may not give a good
presentation of the participants at the far end.
The speaker module
•
The speaker module requires a minimum of 1,5 m / 59 inch free
space in front
•
There should be free sight between the system speaker module
and the ear of the participants.
Adjust the camera view
The microphones
Press the Zoom +/– button
on the
remote control to adjust the picture
on screen.
•
•
The microphones should be evenly distributed on the table
Avoid positions where they can be hidden behind obstacles like
laptop or other equipment placed on the table
Adjust the camera view to allow the
participants to have eye contact with
each other at the same eye level.
•
Do not place a microphone close to noisy equipment like computer
and projector fans, power outlets or similar arrangements on the
table. The microphone will pick up noise from these arrangements
quite strongly.
D14324.04—DECEMBER 2009
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Sharing a PC presentation
Dual video stream
With dual video stream you can view two different live video streams
simultaneously, the main video and one additional source. This could
for example be both a PC presentation and the person who gives the
presentation.
Shows the PC presentation
and the participants
If one of the video systems does not support Dual Video Stream, no
second video stream will be established and the PC presentation will
be shown as the main video.
Sharing the presentation
1. Make sure the PC do not cover any of the microphones as this will
reduce the audio quality at the far end
2. Locate the DVI cable and connect the PC to the video system
3. When pressing the PC button ( ) on the remote control the
default presentation source is activated.
PC
The DVI/VGA input is compliant with VESA Extended Display
Identification Data (EDID) and will be able to notify the PC of the
supported output formats.
Troubleshooting if the presentation does not show
•
On most PC’s you must press a special key combination to switch
the PC image from the PC screen to the video screen
•
Make sure the connector used for PC presentation is configured as
the default presentation source.
Go to: Home > Settings > Advanced > Advanced configuration
> Video > DefaultPresentationSource (the default value is 3,
and corresponds to Home > Settings > Advanced > Advanced
configuration > Video > Input > Source 3)
The screen layout
•
Make sure your PC is set to activate your VGA output
Press the Layout button
on the
remote control to select a suitable
layout on screen.
Other presentation sources
You can also connect other presentation sources like:
The default layout when showing
a PC presentation is designed to
allow the participants to keep eye
contact with each other during the
presentation.
•
•
DVD
Document camera
D14324.04—DECEMBER 2009
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
TANDBERG Remote Control TRC5
Function keys: Represents shortcuts and advanced
functions. Each key reflects a soft key on screen.
Presentation: Press the
key to show/hide a presentation.
key to zoom the camera in
Microphone: Press the
key to toggle the microphones on/off.
Volume: Press the + or – on the
Mute: Press the – on the
key to adjust the codec
volume.
Zoom: Press the + or – on the
and out.
key to mute the volume
during an incoming call.
Arrows:
•
•
•
Up/Down: Use the and arrow keys to navigate in the
menu.
OK/Select: Press the
Phone book: Press the
Home: Press the
key to confirm your choice or selection.
key to display the local Phone book.
key to key to show the menu on screen.
Arrow Right: Press the arrow key to expand the selected
menu item or to move to the right in a text field.
Arrow Left: Press the arrow key to go one step back in
the menu or to move to the left in a text field.
Layout: Press the
key to display the Layout menu, then
select a view in the menu.
Call: Using the
key:
INITIATE A CALL: Select a name from the Phone book or enter the
name, number or URI and press the Call key to initiate the call.
End call/Standby: Press the
idle, press and hold the key to go into standby mode.
key to end a call, or when
SHORTCUT TO RECENT CALLS: Use the Call key as a shortcut to
Recent Calls when the Call menu is not visible.
Alphanumeric keypad: Use the keypad in the same way as you
would use a cellular phone.
Clear: Press the key to remove characters in a text field.
•
0-9, a-z, period (.), @, space, *: Press a key repeatedly to
toggle between the options displayed on each key.
•
abc/123 #: Press the # key to toggle between touch tones
mode (long press), lower case characters and numbers.
Waking up the system
IR transmitter range (DIP switch setting)
Grab the remote control and make sure your hand
touches the rubber line sensors going along both
sides of the remote control.
The IR transmitter has a short and long range. Open the battery
cover and remove the batteries to set the DIP switch.
•
•
Short range (1 m): Move the DIP switch down.
Longer range: Move the DIP switch up.
or: Touch any key on the remote control.
D14324.04—DECEMBER 2009
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Password protection
The system can be password protected in three
ways:
Setting the codec administrator password
Do the following to define the administrator password on the codec:
Setting the menu password
Do the following to define a password for the Advanced menus:
1. The Advanced menus can be password
protected with a menu password.
1. Connect to the codec through the network or the serial data
port, using a command line interface (ssh, telnet or scp)
1. Open the menu on screen and go to: Home > Settings >
Advanced > Change password.
2. The codec can be password protected with an
administrator password.
2. Login to the codec with user name (admin) and no password.
2. The password is a string with 0–255 characters.
3. Run the following API command and enter a password:
xCommand SystemUnit AdminPassword Set
Password: “****”
3. Enter the password and press Save.
3. The web interface is password protected with
the same administrator password as for the
codec. NOTE! Requires a reboot of the codec.
4. The password format is a string with 0–255 characters.
Login to the Advanced menu
When a password is set, the password is required to get access to
the Advanced menu on screen.
5. Reboot the codec.
NOTE! When a new password has been defined
make sure you save a copy of the password in a
safe place.
Password protection of the web interface
How to change the menu password
Contact your TANDBERG representative if you have
forgotten the password.
The web interface is password protected with the same user name
and password as defined for the codec.
1. To change the password, go to: Home > Settings > Advanced
> Change password in the menu.
NOTE! To activate the administrator password on the web interface,
after having defined or changed the administrator password, a
reboot of the codec is required. Without a reboot the administrator
password will only apply when you login to the codec.
2. Enter the new password in the Set password menu.
3. Press Save to save the new password.
Login to the codec or the web interface
How to deactivate the menu password
•
You can login to the codec with the user name and password,
either from a web interface or from a command line interface.
You will need to enter both the user name and password.
1. To change the password, go to: Home > Settings > Advanced
> Change password in the menu.
2. Leave the text field empty in the Set password menu.
•
The user name is admin, and cannot be changed.
3. Press Save to save the blank password. This will deactivate the
menu password.
How to deactivate the administrator password
1. Connect to the codec through the network, using a command
line interface (ssh, telnet or scp).
2. Login to the codec with the required user name (admin) and
password.
3. Run the following API command with a blank password:
xCommand SystemUnit AdminPassword Set
Password: ““
4. Reboot the codec.
D14324.04—DECEMBER 2009
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Startup script
You can add a startup script on the codec to
execute certain commands from the API during
boot up.
Adding a startup script
The startup script can be used to execute certain commands from
the API during boot up. To enable this feature one must log in to the
codec as root and follow the below points.
Login to the codec
1. Connect to the codec through the network, using a command
line interface (ssh, telnet or scp) and login as root
2. Make a user directory using the following command: “mkdir /
user/scripts.d”
3. Put an executable file (permission must be changed to
executable) in this directory.
Example of such a file:
#!/usr/bin/env tsh
xCommand Audio LocalInput Update InputId: 1 MixerMode:Fixed
About the startup script file
•
The file must start with the following sequence:
#!/usr/bin/env tsh
•
•
The file can contain any xCommand or xConfiguration command
The system will execute the commands/configurations in
sequence.
•
•
The file can have any name as long as it is placed in this
directory.
For multiple commands you must use Unix end of line (LF).
Windows end of line will not work.
D14324.04—DECEMBER 2009
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The web interface
The system info page
The web interface allows for remote administration
of the system.
Open a web browser and enter the IP address of
the codec. From this page you have the following
menu options:
•
•
•
•
•
•
•
•
•
System info
Upgrade software
Advanced configuration
Wallpaper
Call
Upload certificates
XML files
Logs
Add release key
Password protection of the web
interface
The web interface is password protected with the
same user name and password as defined for the
codec. See the Password protection section in the
Appendices for a detailed description.
NOTE! To activate the administrator password on
the web interface, after having defined or changed
the administrator password, a reboot of the codec
is required. Without a reboot the administrator
password will only apply when you login to the
codec.
D14324.04—DECEMBER 2009
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The web interface, cont...
The Upgrade software page
The web interface allows for remote administration
of the system.
Open a web browser and enter the IP address of
the codec. From this page you have the following
menu options:
•
•
•
•
•
•
•
•
•
System info
Upgrade software
Advanced configuration
Wallpaper
Call
Upload certificates
XML files
Logs
Add release key
How to upgrade the software on the codec:
1. Contact your TANDBERG representative to obtain the software
upgrade file.
2. Click Browse... and locate the upgrade file (.PKG)
3. Click the Upgrade button to start the installation.
4. Leave the system to allow the installation process to complete.
You can follow the progress on this page. When the upgrade
is successfully completed a message will appear. The upgrade
process takes a few minutes.
D14324.04—DECEMBER 2009
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The web interface, cont...
The Advanced configuration page
The web interface allows for remote administration
of the system.
Open a web browser and enter the IP address of
the codec. From this page you have the following
menu options:
•
•
•
•
•
•
•
•
•
System info
The Advanced configuration defines
the system settings and are structured
in a hierarchy, making up a database
of system settings.
Upgrade software
Advanced configuration
Wallpaper
Call
Upload certificates
XML files
Logs
Add release key
Expanded view
Edit a value: To change a value, click
on the value to see the expanded view
as shown above.
Save: Click the OK button to save the
new value.
Cancel: When you want to leave
without saving, click Cancel.
D14324.04—DECEMBER 2009
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Contact us
Appendices
The web interface, cont...
The Advanced configuration, search functionality
The web interface allows for remote administration
of the system.
Open a web browser and enter the IP address of
the codec. From this page you have the following
menu options:
•
•
•
•
•
•
•
•
•
System info
Upgrade software
Advanced configuration
Wallpaper
The search functionality
When searching for words like H323 or SIP, all
settings beginning with these words, included
all settings below in the hierarchy, will show in
the list.
Call
Upload certificates
XML files
Search: Enter as many characters as needed
to get the desired result and click the Search
button to initiate the search.
Logs
Clear: Click the Clear button to return to the
main view.
Add release key
D14324.04—DECEMBER 2009
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The web interface, cont...
The Wallpaper page
The web interface allows for remote administration
of the system.
Open a web browser and enter the IP address of
the codec. From this page you have the following
menu options:
•
•
•
•
•
•
•
•
•
System info
Upgrade software
Advanced configuration
Wallpaper
Call
Upload certificates
XML files
Logs
Add release key
How to upload a custom wallpaper to the codec and configure the
codec to make use of it:
1. Click the Browse... button to locate the wallpaper file (.PNG)
2. Click the Upload button to upload the file to the codec and
refresh the web page to see the wallpaper you just uploaded.
3. Go to: Advanced configuration page and search for
Wallpaper. From the drop down list, select Custom. The new
wallpaper should now show on the monitor which is connected
to the codec.
If the new wallpaper does not show on the monitor connected to
the codec, you may have to toggle once between Wallpaper: None
and Custom to make the change take effect.
D14324.04—DECEMBER 2009
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The web interface, cont...
The Call page
The web interface allows for remote administration
of the system.
Open a web browser and enter the IP address of
the codec. From this page you have the following
menu options:
•
•
•
•
•
•
•
•
•
System info
Upgrade software
Advanced configuration
Wallpaper
Dial
Hang up
Enter the number or
address and press
the Dial button to dial.
Press the Disconnect
button to end the call.
Call
Upload certificates
XML files
Logs
Add release key
NOTE! No status information is shown on the page during the call.
D14324.04—DECEMBER 2009
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The web interface, cont...
The SSL Certificates page
The web interface allows for remote administration
of the system.
Open a web browser and enter the IP address of
the codec. From this page you have the following
menu options:
•
•
•
•
•
•
•
•
•
System info
Upgrade software
Advanced configuration
Wallpaper
Call
Upload certificates
XML files
Logs
Add release key
About certificates
How to upload the certificate
To install a certificate, you will need:
1. Contact your system administrator to obtain the required files (.PEM
format).
•
•
•
•
HTTPS certificate ( .PEM format)
ROOT certificate ( .PEM format)
Private key ( .PEM format)
Passphrase (optional)
2. Click Browse... and locate the certificate files (.PEM)
3. Enter the Passphrase (optional).
4. Click the Upload button to install the certificates to the codec.
D14324.04—DECEMBER 2009
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The web interface, cont...
The XML files page
The web interface allows for remote administration
of the system.
Open a web browser and enter the IP address of
the codec. From this page you have the following
menu options:
•
•
•
•
•
•
•
•
•
System info
Upgrade software
Advanced configuration
Wallpaper
Call
Upload certificates
XML files
Logs
Add release key
Configuration
Valuespace
The Configuration file gives an overview of the system settings, which
are controlled from the Advanced configuration menu or from the API.
The configuration commands are structured in a hierarchy, making up a
database of system settings.
The Valuespace gives an overview of all the available value spaces.
Documentation
The Documentation file will be described later.
Status
The status information is structured in a hierarchy, making up a database
constantly being updated by the system to reflect system and process
changes.
Command
The Command file gives an overview of the commands available to instruct
the system to perform an action and are issued from the API. A Command
type command is usually followed by a set of parameters to specify how the
given action is to be executed.
Directory
The Directory file will be described later.
D14324.04—DECEMBER 2009
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The web interface, cont...
The Logs page
The web interface allows for remote administration
of the system.
Open a web browser and enter the IP address of
the codec. From this page you have the following
menu options:
•
•
•
•
•
•
•
•
•
System info
Upgrade software
Advanced configuration
Wallpaper
The log files
The log files are TANDBERG specific debug
files which may be required by TANDBERG
in the need of technical support.
Call
Upload certificates
XML files
Logs
Add release key
Historical log files
Current log files
Time stamped historical log files. Click on a file and follow the
instructions in the dialog box to save the application file.
Time stamped event log files. Click on a text file to view the file or follow
the instructions in the dialog box to save an application file.
D14324.04—DECEMBER 2009
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The web interface, cont...
The Add release key page
The web interface allows for remote administration
of the system.
Open a web browser and enter the IP address of
the codec. From this page you have the following
menu options:
•
•
•
•
•
•
•
•
•
System info
Upgrade software
Advanced configuration
Wallpaper
Call
Upload certificates
XML files
Logs
Add release key
The release key
Contact your TANDBERG representative to obtain the release key.
D14324.04—DECEMBER 2009
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Contact us
Appendices
The DNAM Amplifier
TANDBERG DNAM for
Profile 42”/52”
DNAM Loudspeaker cabinet
•
3 x 50W continuous average Center Output
Power (load specified by DNAM Center
Loudspeakers)
The TANDBERG DNAM – Digital Natural Audio
Module – is built on two specially designed
and separate modules, the amplifier and the
loudspeaker cabinet.
•
2 x 50W continuous average Stereo Output
Power (load specified by DNAM Stereo
Loudspeakers)
•
•
Full dynamic range for audio (20Hz–20kHz)
Digital Signal Processing and Filtering on all
channels for best audio detail clarity
The DNAM Loudspeaker Cabinet
•
•
•
3-way Center Loudspeaker system
•
•
Digital Crossover Filtering on center channels
In/out:
Frequency range 50Hz - 20kHz
2 x 100 mm low- and midrange loudspeaker 8
Ohms nominal, excellent quality (SEAS Prestige
series)
•
•
•
•
Audio In - SPDIF (stereo) or Analog (mono),
using the same connector.
Audio Differential In - (female XLR pinout: 1 -
GND, 2 – Signal (+), 3 – Signal (-))
•
•
•
•
1 x 25mm dome tweeter, 6 ohms nominal,
excellent quality
Audio Loop Out - line out directly from the
input, always analog even with SPDIF in.
Active crossover filtered audio signals received
from DNAM amplifier
Audio Stereo Out - (male XLR, common
GND configuration)
Long time max power 70 Watt on all
loudspeakers
DNAM Amplifier
•
Fuse 2A 250V Slow, 5 x 20mm, Littelfuse
type 215002. Push and twist anti-clockvice to
release.
Power socket
Enclosed MDF loudspeaker cabinet
Fuse
Integrated Left / Right Stereo Loudspeaker
Stereo Loudspeaker System, each side has:
•
1 x 90 mm fullrange loudspeaker, 8 Ohms
nominal, excellent quality
•
•
Frequency range 70 Hz - 20 kHz
Enclosed MDF Loudspeaker cabinet
Multiaccess Audio
In / Out (D-SUB)
Audio In
(RCA)
Audio Stereo Out (XLR)
Audio Differential In (XLR)
Audio Loop Out
(RCA)
D14324.04—DECEMBER 2009
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Contact us
Appendices
The DNAM Amplifier
TANDBERG DNAM for
Profile 65”
DNAM Loudspeaker
•
3 x 50W continuous average Center Output
Power (load specified by DNAM Center
Speakers).
The TANDBERG DNAM – Digital Natural Audio
Module – is built on two specially designed
and separate modules, the amplifier and the
loudspeaker cabinet.
•
2 x 50W continuous average Stereo Output
Power (load specified by TANDBERG
Loudspeaker Stereo Kit).
•
•
Full dynamic range for audio (high fidelity range)
or Integrated stereo speakers.
The DNAM Loudspeaker Cabinet
Digital Signal Processing and Filtering on all
channels for best audio detail clarity.
•
•
•
3-way Center Speaker system
•
•
Digital Crossover Filtering on center channels.
In/out:
Frequency range 50Hz - 20kHz
2 x 100mm low- and midrange loudspeakers,
8 ohms nominal, excellent quality (SEAS Excel
series)
•
•
•
•
Audio In - SPDIF (stereo) or Analog (mono),
using the same connector.
DNAM Amplifier
15 pin D-SUB
(for loudspeakers)
•
•
•
•
1 x 25mm dome tweeter, 6 ohms nominal, high
quality
Differential In - (female XLR pinout: 1 - GND,
2 – Signal (+), 3 – Signal (-))
Crossover filtered audio signals received from
DNAM amplifier
Loop Out - line out directly from the input,
always analog even with SPDIF in.
RCA (audio in)
RCA (loop out)
XLR–female
XLR–male
Long time max power 70 Watt on all
loudspeakers
Stereo Out - (male XLR, common GND
configuration)
Enclosed MDF speaker cabinet
•
Fuse 2A 250V Slow, 5 x 20mm, Littelfuse type
215002.
Power socket
Integrated Stereo Speaker
2-way Stereo Speaker System, each side has:
•
1 x 100mm low- and midrange loudspeaker, 8
ohms nominal, excellent quality (SEAS Excel
series)
•
1 x 25mm dome tweeter, 6 ohms nominal, high
quality
•
•
•
•
Passive crossover filter
Frequency range 70 Hz - 20 kHz
Long time max power 70 Watt
Enclosed MDF speaker cabinet
Fuses
D14324.04—DECEMBER 2009
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
•
•
•
•
•
•
•
•
•
•
•
•
RFC 4574 The Session Description Protocol (SDP) Label Attribute
RFC 4582 The Binary Floor Control Protocol
RFC 4585 Extended RTP Profile for RTCP-Based Feedback
RFC 4587 RTP Payload Format for H.261 Video Streams
RFC 4629 RTP Payload Format for ITU-T Rec. H.263 Video
RFC 5168 XML Schema for Media Control
Current RFCs and drafts supported in SIP
Supported RFCs in SIP
•
•
•
•
•
RFC 1889 RTP: A Transport Protocol for Real-time Applications
RFC 2190 RTP Payload Format for H.263 Video Streams
RFC 2327 SDP: Session Description Protocol
The RFC (Request for Comments) series contains technical and
organizational documents about the Internet, including the technical
specifications and policy documents produced by the Internet
Engineering Task Force (IETF).
RFC 2396 Uniform Resource Identifiers (URI): Generic Syntax
RFC 2429 RTP Payload Format for the 1998 Version of ITU-T Rec.
H.263 Video (H.263+)
RFC 4796 The SDP Content Attribute
•
•
RFC 2617 Digest Authentication
RFC 4583 SDP Format for BFCP Streams
RFC 2782 DNS RR for specifying the location of services (DNS
SRV)
RFC 5589: SIP Call Control Transfer
draft-ietf-avt-rtp-h264-rcdo-02
•
RFC 2833 RTP Payload for DTMF Digits, Telephony Tones and
Telephony Signals
draft-ietf-avt-rtp-rfc3984bis-06
draft-ietf-sip-outbound-20: Managing Client Initiated Connections
•
•
•
RFC 2976 The SIP INFO Method
RFC 3016 RTP Payload Format for MPEG-4 Audio/Visual Streams
RFC 3047 RTP Payload Format for ITU-T Recommendation
G.722.1
Media capabilities supported in SIP
The audio and video media capabilities supported in SIP are the same
as for H.323.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RFC 3261 SIP: Session Initiation Protocol
RFC 3262 Reliability of Provisional Responses in SIP
RFC 3263 Locating SIP Servers
RFC 3264 An Offer/Answer Model with SDP
RFC 3311 UPDATE method
RFC 3361 DHCP Option for SIP Servers
RFC 3420 Internet Media Type message/sipfrag
RFC 3515 Refer method
RFC 3550 RTP: A Transport Protocol for Real-Time Applications
RFC 3581 Symmetric Response Routing
RFC 3605 RTCP attribute in SDP
RFC 3711 The Secure Real-time Transport Protocol (SRTP)
RFC 3840 Indicating User Agent Capabilities in SIP
RFC 3890 A Transport Independent Bandwidth Modifier for SDP
RFC 3891 The SIP “Replaces” Header
RFC 3892 Referred-By Mechanism
RFC 3960 Early Media
RFC 3984 RTP Payload Format for H.264 Video
RFC 4028 Session Timers in SIP
RFC 4145 TCP-Based Media Transport in the SDP
RFC 4568 SDP:Security Descriptions for Media Streams
D14324.04—DECEMBER 2009
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
China RoHS table
This product complies with the Chineese RoHS.
D14324.04—DECEMBER 2009
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Contact us
Appendices
CE Declaration for TANDBERG Profile
For an official, signed version of the document, or details regarding documentation from the technical
construction file, please contact TANDBERG.
EC Declaration of conformity
MANUFACTURER:
TANDBERG Telecom AS
TANDBERG Telecom AS
TANDBERG Telecom AS
TANDBERG Telecom AS
PRODUCT NAME:
TANDBERG Telepresence T1
TANDBERG Profile 65 Dual C90
PROFILE 42
PROFILE 52
PROFILE 52 Dual
PROFILE 65 w. C60
TTC60-11
TYPE NUMBER:
DESCRIPTION:
DIRECTIVES:
TTC60-12
TTC60-13
TTC60-14
Video Conferencing Equipment
Video Conferencing Equipment
Video Conferencing Equipment
Video Conferencing Equipment
LVD 2006/95/EC
LVD 2006/95/EC
LVD 2006/95/EC
LVD 2006/95/EC
This equipment complies
with.
EMC 2004/108/EC
EMC 2004/108/EC
EMC 2004/108/EC
EMC 2004/108/EC
HARMONIZED
STANDARDS:
EN 60950-1:2006
EN 60950-1:2006
EN 60950-1:2006
EN 55022 (2006)
EN 60950-1:2006
EN 55022 (2006)
EN 55022 (2006)
EN 55022 (2006)
Applied in order to verify
compliance with directives.
EN 55024 (1998) + A1 (2001) + A2 (2003)
EN 61000-3-2 (2006)
EN 55024 (1998) + A1 (2001) + A2 (2003)
EN 61000-3-2 (2006)
EN 55024 (1998) + A1 (2001) + A2 (2003)
EN 61000-3-2 (2006)
EN 55024 (1998) + A1 (2001) + A2 (2003)
EN 61000-3-2 (2006)
EN 61000-3-3 (1995) + A1 (2001) + A2
(2005)
EN 61000-3-3 (1995) + A1 (2001) + A2
(2005)
EN 61000-3-3 (1995) + A1 (2001) + A2
(2005)
EN 61000-3-3 (1995) + A1 (2001) + A2 (2005)
TEST REPORTS and
Report/Certificates No:
Report/Certificates No:
Report/Certificates No:
Report/Certificates No:
CERTIFICATES ISSUED BY:
LVD (Nemko AS) 118330, 119330,
120725 and 123953
LVD (Nemko AS) 118330 and 119330
LVD (Nemko AS) 118330, 119330,
120725, 123953, 126466
LVD (Nemko AS) 121982,
LVD (Nemko AS) 136312 (Profile 65 w. C60 only)
EMC (Nemko AS) E08604.00 (118330),
E09630.00 (119330)
EMC (Nemko AS) E09640.00 (123774)
EMC (Nemko AS) E09682.00 (128465),
E09634.00 (123042)
EMC (Nemko AS) E08564.00,
R&TTE (Comlab) 03/559/3, 03/559/4,
03/560/3, 03/560/4
EMC (Nemko AS) E08564.01 (Profile 65 w. C60
only)
R&TTE (Comlab) 03/559/3, 03/559/4,
03/560/3, 03/560/4
TECHNICAL
CONSTRUCTION FILE NO.:
X14474
2009
X14475
2009
X14539
X14383 rev. 3
YEAR WHICH THE CE-
MARK WAS AFFIXED:
2009
2008
2009 (Profile 65 products)
D14324.04—DECEMBER 2009
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Dimensions
980
Profile 42” with standalone foot
The dimensions in mm.
198
662
D14324.04—DECEMBER 2009
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
980
Dimensions
Profile 42” with wall mount foot
The dimensions in mm.
198
594
D14324.04—DECEMBER 2009
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
980
Dimensions
Profile 42” with wheelbase foot
The dimensions in mm.
198
817
D14324.04—DECEMBER 2009
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Dimensions
1205
Profile 52” with standalone foot
The dimensions in mm.
1614,7
1498,3
1205,3
660
245,8
170,0
680,0
264,2
D14324.04—DECEMBER 2009
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Dimensions
1205
Profile 52” with wall mount foot
The dimensions in mm.
310
D14324.04—DECEMBER 2009
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
1205
Dimensions
Profile 52” with wheelbase foot
The dimensions in mm.
310
807
1206
D14324.04—DECEMBER 2009
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Dimensions
Profile 52” Dual with standalone foot
2412
The dimensions in mm.
607,9
1268
D14324.04—DECEMBER 2009
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Profile wall mount setup
PROFILE 42 AND 52
PROFILE 52 DUAL
746
384
7,0
90
7,0
90
1268
Cables are by de-
fault exiting the
system on right side,
but can easily be
swithced to left side.
594
WARNING!
Add the suitable fixing device for the screws in the wall
Mounting
Due to the size and mass of this equipment, it is very important that
the wall mount unit is safely installed according to the installation
instructions and that the wall is able to safely support the product.
Open the rear door and locate and connect the cables which are
lead out of the system at the rear side (the door is not accessible
when placed by the wall)
Use the Allen key, which is found in the foot box, when fastening the
wall brackets to the bottom module with four M6x10 screws
Place the bottom module by the wall, mark where to bolt the bracket
and move away the bottom module
It is highly recommended that the wall mounted system is installed by
trained personnel
Place the bottom module by the wall and bolt it to the wall.
NOTE! Use a level to make sure the system is mounted in an upright
position. Add a spacer between the wall bracket and the wall if
necessary.
D14324.04—DECEMBER 2009
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Dimensions
Profile 65” with standalone foot
The dimensions in mm.
1532,0
211,7
49,8
808,4
1668,0
1552,8
1456,2
153,8
26,8
39,5
427,7
770,0
20,0
172,0
660,0
104,0
D14324.04—DECEMBER 2009
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Dimensions
Profile 65” with wall mounting foot
The dimensions in mm.
1532,0
211,7
49,8
808,4
1668,0
1552,8
1456,2
153,8
427,7
26,8
39,5
770,0
20,0
172,0
104,0
441,0
D14324.04—DECEMBER 2009
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Dimensions
PrecisionHD 1080p camera
The dimensions in mm.
142,0
4,4
105,0
148,1
105,9 (eye centre)
20,5
32,2
62,4
2,5
2,5
220,0
125,4
190,0
ø
79,6
63,0
14,0
114,6
34,5
106,3°
191,0
ø
82,0
D14324.04—DECEMBER 2009
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Contact us
Appendices
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1600 x 1200@50, 60 Hz (UXGA)
1440 X 900@60 Hz (WXGA+)
•
•
•
•
•
•
•
•
1920 x 1080@50 Hz (1080p50)
1920 x 1080@30 Hz (1080p30)
1920 x 1080@25 Hz (1080p25)
1280 x 720@60 Hz (720p60)
1280 x 720@50 Hz (720p50)
1280 x 720@30 Hz (720p30)
720 x 576@50 Hz (576p50)
720 x 480@60 Hz (480p60)
•
•
•
•
•
•
•
•
1280 x 768@30 fps (WXGA)
1440 x 900@30 fps (WXGA+)
1680 x 1050@30 fps (WSXGA+)
1600 x 1200@30 fps (UXGA)
512 x 288@60 fps (w288p60)*
768 x 448@60 fps (w448p60)*
1024 x 576@60 fps (w576p60)*
1280 x 720@60 fps (720p60)*
Technical specifications
for Profile 42”/52”
1400 x 1050@60, 75 Hz
1366 x 768@60 Hz
UNIT DELIVERED COMPLETE WITH:
1360 x 768@60 Hz
Full HD LCD display, Codec C60, remote control,
PrecisionHD 1080p Camera, microphone (3x with single
screen, 4x with dual screen), Digital Audio Module,
integrated speakers and integrated cabling.
1280 x 1024@60, 75, 85 Hz (SXGA)
1280 x 960@60, 85 Hz
1280 x 800@60 Hz (WXGA)
1280 x 768@60, 75, 85 Hz (WXGA)
1280 x 720@60, 59.94 Hz (720p60)
1280 x 720@50 Hz (720p50)
1152 x 864@75 Hz
Choice of installation configuration: floor stand, wheel base
or wall mount on pedestal.
AUDIO STANDARDS
Extended Display Identification Data (EDID)
•
G.711, G.722, G.722.1, 64 bit & 128 bit MPEG4 AAC-
LD, AAC-LD Stereo
Choice of screen size and configuration.
1 X Composite input (BNC connector), supported formats:
PAL/NTSC
MONITOR Available with:
•
AUDIO FEATURES
1024 x 768@60, 70, 75, 85 Hz (XGA)
848 x 480@60 Hz
•
•
52’’ Full HD LCD, 16:9, 1080x1920 resolution
42’’ Full HD LCD, 16:9, 1080x1920 resolution
•
•
•
•
•
•
•
CD-Quality 20KHz Mono and Stereo
Four separate acoustic echo cancellers
4-port Audio mixer
VIDEO OUTPUTS (2 OUTPUTS)
800 x 600@56, 60, 72, 75, 85 Hz (SVGA)
720 x 576@50 Hz (576p50)
720 x 480@60, 59.94 Hz (480p60)
640 x 480@60, 72, 75, 85 Hz (VGA)
1 X HDMI output, 1 X DVI-I output, supported formats:
BASE Available with:
•
•
•
•
•
•
•
•
•
•
•
1920 x 1080@60 Hz (1080p60)
1920 x 1200@60Hz (WUXGA)
1600 x 1200@60 Hz (UXGA)
1366 x 768@60 Hz
•
•
•
Floor standing foot plate
Automatic Gain Control (AGC)
Automatic Noise Reduction
Active lip synchronization
Wheel base (not available on 52” dual)
Wall mount on pedestal
2 x DVI-I inputs, supported formats:
ALD (Assistive Listening Devices) support with
acoustic echo cancellation
1360 x 768@60 Hz
BANDWIDTH
Digital (DVI-D):
1280 x 720@60 Hz (720p60)
1280 x 1024@60 Hz (SXGA)
1280 x 768@60 Hz (WXGA)
1024 x 768@60 Hz (XGA)
800 x 600@60 Hz (SVGA)
640 x 480@60 Hz (VGA)
•
H.323/SIP up to 6 Mbps point-to-point
•
Same as HDMI, ref. above.
AUDIO INPUTS (7 INPUTS)
•
H.323/SIP up to 10 Mbps Multisite*
Analog RGB (DVI-A):
•
4 x microphone, 48V phantom powered, XLR
connector each with separate echo cancellers and
noise reduction,all microphones can be set for
balanced line level
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1920 x 1080@60 Hz (1080p60)
1920 x 1200@50 Hz (WUXGA)
1680 x 1050@60 Hz (WSXGA+)
1600 x 1200@60 Hz (UXGA)
1440 x 900@60 Hz (WXGA+)
1400 x 1050@60, 75 Hz
FIREWALL TRAVERSAL
•
•
•
TANDBERG Expressway™ Technology
H.460.18, H.460.19 Firewall Traversal
SIP ICE
•
•
2 x RCA/Phono, Line Level: Stereo PC input,
configurable to 2 x RCA/Phono, Line Level: Mono
auxiliary/DVD input
VESA Monitor Power Management
VIDEO STANDARDS
H.261, H.263, H.263+, H.264
1 x HDMI, digital: Stereo PC/DVD inputs
1 X Composite output (BNC connector), supported
formats:
•
1366 x 768@60 Hz
AUDIO OUTPUTS (3 OUTPUTS)
1360 x 768@60 Hz
VIDEO FEATURES
•
PAL/NTSC
•
2 x RCA/Phono, line level, stereo main audio,
configurable to S/PDIF or 2 x RCA/Phono, line level,
mono to recording device
1280 x 1024@60, 75, 85 Hz (SXGA)
1280 x 960@60, 85 Hz
•
•
•
•
Native 16:9 Widescreen
Advanced Screen Layouts
Intelligent Video Management
Local Auto Layout
LIVE VIDEO RESOLUTIONS (ENCODE/DECODE)
•
•
•
•
•
•
•
•
•
•
•
•
•
176 x 144@30 fps (QCIF)
352 x 288@30 fps (CIF)
•
1 x HDMI, digital, stereo main audio
1280 x 800@60 Hz (WXGA)
1280 x 768@60, 75, 85 Hz (WXGA)
1280 x 720@60 Hz (720p60)
1152 x 864@75 Hz
DUAL STREAM
512 x 288@30 fps (w288p)
576 x 448@30 fps (448p)
768 x 448@30 fps (w448p)
704 x 576@30 fps (4CIF)
1024 x 576@30 fps (w576p)
640 x 480@30 fps (VGA)
800 x 600@30 fps (SVGA)
1024 x 768@30 fps (XGA)
1280 x 1024@30 fps (SXGA)
1280 x 720@30 fps (720p30)
1920 x 1080@30 fps (1080p30)*
•
•
•
H.239 (H.323) dual stream
BFCP (SIP) dual stream
VIDEO INPUTS (5 INPUTS)
1024 x 768@60, 70, 75, 85 Hz (XGA)
848 x 480@60 Hz
2 X HDMI inputs, supported formats:
Support for resolutions up to 1080p30 in both main
stream and dual stream simultaneously
•
•
•
•
•
•
•
1920 x 1080@60, 59.94 Hz (1080p60)
1920 x 1080@50 Hz (1080p50)
1920 x 1080@30, 29.97 Hz (1080p30)
1920 x 1080@25 Hz (1080p25)
1920 x 1080@24, 23.97 Hz (1080p24)
1920 x 1200@50 Hz (WUXGA)
800 x 600@56, 60, 72, 75, 85 Hz (SVGA)
720 x 576@50 Hz
MULTISITE FEATURES*
•
•
•
•
•
4-way 720p30 High Definition SIP/H.323 MultiSite
Full individual audio and video transcoding
Individual layouts in MultiSite CP (Takes out SelfView)
H.323/SIP/VoIP in the same conference
720 x 480@60, 59.94 Hz (480p60)
640 x 480@60, 72, 75, 85 Hz (VGA)
Analog YPbPr (DVI-A):
1920 x 1080@60 Hz (1080p60)
1680 x 1050@60 Hz (WSXGA+)
•
Best Impression (Automatic CP Layouts)
D14324.04—DECEMBER 2009
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
PRECISIONHD 1080P CAMERA
POWER
WEIGHT
Technical specifications
for Profile 42”/52”, cont...
•
•
•
•
•
•
•
•
1/3” CMOS
Profile 42’’
Profile 42’’
12 x zoom
•
•
•
Auto-sensing power supply
•
•
With foot base: 220.5 lbs / 100 kg
With wheel base: 200.6 lbs / 91 kg
+15°/-25° tilt, +/- 90° pan
43.5° vertical field of view
72° horizontal field of view
Focus distance 0.3m–infinity
1920 x 1080 pixels progressive @ 60fps
100-120/200-240 VAC, 60/50Hz, 4.5A max
Maximum power rating 365W
Profile 52’’
•
•
•
•
H.264, Encryption, Dual Stream from any site
IP Downspeeding
Profile 52’’
•
•
With foot base: 253.5 lbs / 115 kg
With wheel base: 229.3 lbs / 104 kg
•
•
•
Auto-sensing power supply
Dial in/Dial out
100-120/200-240 VAC, 60/50Hz, 6A max
Maximum power rating 526W
Profile 52’’ Dual
• With foot base: 515.9 lbs / 234 kg
Conference rates up to 10 Mbps
Other formats supported (configurable through Dip-
switch):
PROTOCOLS
Profile 52’’ Dual
All specifications are subject to change without notice,
system specifics may vary.
•
•
•
•
•
•
•
•
1920 x 1080@60 Hz (HDMI only)
1920 x 1080@50 Hz (HDMI only)
1920 x 1080@30 Hz
•
•
H.323
SIP
•
•
Auto-sensing power supply
100-120/200-240 VAC, 60/50Hz, 10/5A max
Maximum power rating 870W
All images in these materials are for representational
purposes only, actual products may differ.
•
EMBEDDED ENCRYPTION
1920 x 1080@25 Hz
TANDBERG and Expressway are registered trademarks
or trademarks of TANDBERG in the U.S. and other
countries.
•
•
•
•
H.323/SIP point-to-point
OPERATING TEMPERATURE AND HUMIDITY
1280 x 720@60 Hz
Standards-based: H.235 v2 & v3 and AES
Automatic key generation and exchange
Supported in Dual Stream
•
•
0° C to 35° C (32° F to 95° F) ambient temperature
10% to 90% Relative Humidity (RH)
1280 x 720@50 Hz
1280 x 720@30 Hz
All other trademarks are property of their respective
owners.
1280 x 720@25 Hz
STORAGE AND TRANSPORT TEMPERATURE
•
•
•
•
•
Automatic or manual focus/brightness/white balance
Far-end camera control
IP NETWORK FEATURES
•
-20° C to 60° C (-4° F to 140° F) at RH 10–90% (non-
condensing)
MTBF PRODUCT RELIABILITY/MTBF
•
•
•
DNS lookup for service configuration
Differentiated Services (QoS)
The predicted reliability is expressed in the expected
random Mean Time Between Failures (MTBF) for the
electronic components based on the Power On Hours:
Daisy-chain support (Visca protocol camera)
Dual HDMI and HD-SDI output
APPROVALS
IP adaptive bandwidth management (including flow
control)
•
Directive 2006/95/EC (Low Voltage Directive) –
Upside-down mounting with automatic flipping of
picture
Power On Hours (POH) > 69 000 hours
Useful Life Cycle > 6 years
Standard EN60950-1, 2nd ed
•
•
•
•
•
•
•
•
•
Auto gatekeeper discovery
Dynamic playout and lip-sync buffering
H.245 DTMF tones in H.323
Date and Time support via NTP
Packet Loss based Downspeeding
URI Dialing
•
Directive 2004/108/EC (EMC Directive) – Standard
EN55022, Class A – Standard EN55024 – Standard
EN61000-3-2/-3-3
SYSTEM MANAGEMENT
ISO 9001 certificate is available upon request
•
•
Support for the TANDBERG Management Suite
•
•
Approved according to UL60950-1 2nd ed and CAN/
CSA-C22.2 No. 60950-1-07, 2nd ed
Total management via embedded SNMP, Telnet, SSH,
XML, SOAP
Complies with FCC15B Class A
•
Remote software upload: via web server, SCP, HTTP,
HTTPS
December 2009
TCP/IP
DIMENSIONS
•
•
1 x RS-232 for local control and diagnostics
Remote control and on-screen menu system
DHCP
Profile 42’’
Direct DNS dialing
•
•
•
Height: 63.78” / 162 cm
Width: 38.58” / 98 cm
Depth: 6.7” / 17 cm
DIRECTORY SERVICES
SECURITY FEATURES
•
•
•
Support for Local directories (My Contacts)
Corporate Directory
•
•
•
•
•
Management via HTTPS and SSH
IP Administration Password
Menu Administration Password
Disable IP services
Profile 52’’
•
•
•
Height: 63.78” / 162 cm
Unlimited entries using Server directory supporting
LDAP and H.350
Width: 47.25” / 120 cm
Depth: 6.7” / 17 cm
•
Unlimited number for Corporate directory (through
TMS)
Network Settings protection
Profile 52’’ Dual
•
•
•
•
200 number local directory
NETWORK INTERFACES **
1 x LAN/Ethernet (RJ-45) 10/100/1000 Mbit
•
•
•
Height: 63.5” / 161.3 cm
Received Calls with Date and Time
Placed Calls with Date and Time
Missed Calls with Date and Time
•
Width: 95” / 241.2 cm
Depth: 6.7” / 17 cm
OTHER INTERFACES
•
•
•
USB host for future usage
USB device for future usage
GPIO for future usage
* requires option
** only one LAN/Ethernet interface supported
D14324.04—DECEMBER 2009
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Contact us
Appendices
•
•
•
•
•
•
•
•
•
•
•
•
1280 x 960@60, 85 Hz
1280 x 800@60 Hz (WXGA)
•
•
720 x 576@50 Hz (576p50)
720 x 480@60 Hz (480p60)
•
•
•
768 x 448@60 fps (w448p60)*
1024 x 576@60 fps (w576p60)*
1280 x 720@60 fps (720p60)*
Technical specifications
for Profile 65”
1280 x 768@60, 75, 85 Hz (WXGA)
1280 x 720@60, 59.94 Hz (720p60)
1280 x 720@50 Hz (720p50)
1152 x 864@75 Hz
Extended Display Identification Data (EDID)
AUDIO STANDARDS
UNIT DELIVERED COMPLETE WITH:
•
G.711, G.722, G.722.1, 64 bit & 128 bit MPEG4 AAC-
LD, AAC-LD Stereo
1 X Composite input (BNC connector), supported formats:
PAL/NTSC
Full HD LCD display, Codec C60, remote control,
PrecisionHD 1080p Camera, microphone, Digital Audio
Module, integrated speakers and integrated cabling.
•
1024 x 768@60, 70, 75, 85 Hz (XGA)
848 x 480@60 Hz
AUDIO FEATURES
VIDEO OUTPUTS (2 OUTPUTS)
MONITOR Available with:
•
•
•
•
•
•
•
CD-Quality 20KHz Mono and Stereo
Four separate acoustic echo cancellers
4-port Audio mixer
800 x 600@56, 60, 72, 75, 85 Hz (SVGA)
720 x 576@50 Hz (576p50)
1 X HDMI output, 1 X DVI-I output, supported formats:
•
65’’ Full HD LCD, 16:9, 1080x1920 resolution
•
•
•
•
•
•
•
•
•
•
•
1920 x 1080@60 Hz (1080p60)
1920 x 1200@60Hz (WUXGA)
1600 x 1200@60 Hz (UXGA)
1366 x 768@60 Hz
720 x 480@60, 59.94 Hz (480p60)
640 x 480@60, 72, 75, 85 Hz (VGA)
BASE Available with:
Automatic Gain Control (AGC)
Automatic Noise Reduction
Active lip synchronization
•
•
Floor standing foot plate
Wall mount on pedestal
2 x DVI-I inputs, supported formats:
1360 x 768@60 Hz
Digital (DVI-D):
ALD (Assistive Listening Devices) support with
acoustic echo cancellation
BANDWIDTH
1280 x 720@60 Hz (720p60)
1280 x 1024@60 Hz (SXGA)
1280 x 768@60 Hz (WXGA)
1024 x 768@60 Hz (XGA)
800 x 600@60 Hz (SVGA)
640 x 480@60 Hz (VGA)
•
Same as HDMI, ref. above.
•
•
H.323/SIP up to 6 Mbps point-to-point
H.323/SIP up to 10 Mbps Multisite*
Analog RGB (DVI-A):
AUDIO INPUTS (7 INPUTS)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1920 x 1080@60 Hz (1080p60)
1920 x 1200@50 Hz (WUXGA)
1680 x 1050@60 Hz (WSXGA+)
1600 x 1200@60 Hz (UXGA)
1440 x 900@60 Hz (WXGA+)
1400 x 1050@60, 75 Hz
•
4 x microphone, 48V phantom powered, XLR
connector each with separate echo cancellers and
noise reduction,all microphones can be set for
balanced line level
FIREWALL TRAVERSAL
•
•
•
TANDBERG Expressway™ Technology
H.460.18, H.460.19 Firewall Traversal
SIP ICE
•
•
2 x RCA/Phono, Line Level: Stereo PC input,
configurable to 2 x RCA/Phono, Line Level: Mono
auxiliary/DVD input
VESA Monitor Power Management
VIDEO STANDARDS
H.261, H.263, H.263+, H.264
1 X Composite output (BNC connector), supported
formats:
1 x HDMI, digital: Stereo PC/DVD inputs
1366 x 768@60 Hz
•
1360 x 768@60 Hz
AUDIO OUTPUTS (3 OUTPUTS)
VIDEO FEATURES
•
PAL/NTSC
1280 x 1024@60, 75, 85 Hz (SXGA)
1280 x 960@60, 85 Hz
•
2 x RCA/Phono, line level, stereo main audio,
configurable to S/PDIF or 2 x RCA/Phono, line level,
mono to recording device
•
•
•
•
Native 16:9 Wide screen
Advanced Screen Layouts
Intelligent Video Management
Local Auto Layout
LIVE VIDEO RESOLUTIONS (ENCODE/DECODE)
1280 x 800@60 Hz (WXGA)
1280 x 768@60, 75, 85 Hz (WXGA)
1280 x 720@60 Hz (720p60)
1152 x 864@75 Hz
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
176 x 144@30 fps (QCIF)
•
1 x HDMI, digital, stereo main audio
352 x 288@30 fps (CIF)
512 x 288@30 fps (w288p)
576 x 448@30 fps (448p)
768 x 448@30 fps (w448p)
704 x 576@30 fps (4CIF)
DUAL STREAM
VIDEO INPUTS (5 INPUTS)
•
•
•
H.239 (H.323) dual stream
BFCP (SIP) dual stream
1024 x 768@60, 70, 75, 85 Hz (XGA)
848 x 480@60 Hz
2 X HDMI inputs, supported formats:
•
•
•
•
•
•
•
•
•
•
•
•
•
1920 x 1080@60, 59.94 Hz (1080p60)
1920 x 1080@50 Hz (1080p50)
1920 x 1080@30, 29.97 Hz (1080p30)
1920 x 1080@25 Hz (1080p25)
1920 x 1080@24, 23.97 Hz (1080p24)
1920 x 1200@50 Hz (WUXGA)
1680 x 1050@60 Hz (WSXGA+)
1600 x 1200@50, 60 Hz (UXGA)
1440 X 900@60 Hz (WXGA+)
1400 x 1050@60, 75 Hz
Support for resolutions up to 1080p30 in both main
stream and dual stream simultaneously
800 x 600@56, 60, 72, 75, 85 Hz (SVGA)
720 x 576@50 Hz
1024 x 576@30 fps (w576p)
640 x 480@30 fps (VGA)
MULTISITE FEATURES*
720 x 480@60, 59.94 Hz (480p60)
640 x 480@60, 72, 75, 85 Hz (VGA)
800 x 600@30 fps (SVGA)
1024 x 768@30 fps (XGA)
1280 x 1024@30 fps (SXGA)
1280 x 720@30 fps (720p30)
1920 x 1080@30 fps (1080p30)*
1280 x 768@30 fps (WXGA)
1440 x 900@30 fps (WXGA+)
1680 x 1050@30 fps (WSXGA+)
1600 x 1200@30 fps (UXGA)
512 x 288@60 fps (w288p60)*
•
•
•
•
•
•
•
•
•
4-way 720p30 High Definition SIP/H.323 MultiSite
Full individual audio and video transcoding
Individual layouts in MultiSite CP (Takes out SelfView)
H.323/SIP/VoIP in the same conference
Best Impression (Automatic CP Layouts)
H.264, Encryption, Dual Stream from any site
IP Downspeeding
Analog YPbPr (DVI-A):
•
•
•
•
•
•
•
1920 x 1080@60 Hz (1080p60)
1920 x 1080@50 Hz (1080p50)
1920 x 1080@30 Hz (1080p30)
1920 x 1080@25 Hz (1080p25)
1280 x 720@60 Hz (720p60)
1280 x 720@50 Hz (720p50)
1280 x 720@30 Hz (720p30)
1366 x 768@60 Hz
Dial in/Dial out
1360 x 768@60 Hz
Conference rates up to 10 Mbps
1280 x 1024@60, 75, 85 Hz (SXGA)
D14324.04—DECEMBER 2009
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
•
•
•
•
•
43.5° vertical field of view
72° horizontal field of view
OPERATING TEMPERATURE AND HUMIDITY
All specifications are subject to change without notice,
system specifics may vary.
Technical specifications
for Profile 65”, cont...
•
•
0° C to 35° C (32° F to 95° F) ambient temperature
10% to 90% Relative Humidity (RH)
Focus distance 0.3m–infinity
All images in these materials are for representational
purposes only, actual products may differ.
1920 x 1080 pixels progressive @ 60fps
STORAGE AND TRANSPORT TEMPERATURE
Other formats supported (configurable through Dip-
switch):
TANDBERG and Expressway are registered trademarks
or trademarks of TANDBERG in the U.S. and other
countries.
PROTOCOLS
•
-20° C to 60° C (-4° F to 140° F) at RH 10–90% (non-
condensing)
•
•
H.323
SIP
•
•
•
•
•
•
•
•
1920 x 1080@60 Hz (HDMI only)
1920 x 1080@50 Hz (HDMI only)
1920 x 1080@30 Hz
All other trademarks are property of their respective
owners.
APPROVALS
EMBEDDED ENCRYPTION
•
•
•
•
•
•
•
•
•
• Directive 2006/95/EC (Low Voltage Directive)
1920 x 1080@25 Hz
•
•
•
•
H.323/SIP point-to-point
• — Standard EN 60950-1
MTBF PRODUCT RELIABILITY/MTBF
1280 x 720@60 Hz
Standards-based: H.235 v2 & v3 and AES
Automatic key generation and exchange
Supported in Dual Stream
• Directive 2004/108/EC (EMC Directive)
• — Standard EN 55022, Class B
• — Standard EN 55024
The predicted reliability is expressed in the expected
random Mean Time Between Failures (MTBF) for the
electronic components based on the Power On Hours:
1280 x 720@50 Hz
1280 x 720@30 Hz
Power On Hours (POH) > 69 000 hours
Useful Life Cycle > 6 years
1280 x 720@25 Hz
• — Standard EN 61000-3-2/-3-3
• Approved according to UL 60950-1 and CSA 60950-
1-07
IP NETWORK FEATURES
•
•
•
•
•
Automatic or manual focus/brightness/white balance
Far-end camera control
•
•
•
DNS lookup for service configuration
Differentiated Services (QoS)
ISO 9001 certificate is available upon request
Daisy-chain support (Visca protocol camera)
Dual HDMI and HD-SDI output
• Complies with FCC15B Class B
IP adaptive bandwidth management (including flow
control)
DIMENSIONS
Upside-down mounting with automatic flipping of
picture
•
•
•
•
•
•
•
•
•
Auto gatekeeper discovery
Dynamic playout and lip-sync buffering
H.245 DTMF tones in H.323
Date and Time support via NTP
Packet Loss based Downspeeding
URI Dialing
•
•
•
• Height: 167 cm (65.6 inches)
December 2009
• Width: 153 cm (60.3 inches)
• Depth: 17 cm (6.8 inches)
SYSTEM MANAGEMENT
•
•
Support for the TANDBERG Management Suite
WEIGHT
With foot base: 330 lbs / 150 kg
Total management via embedded SNMP, Telnet, SSH,
XML, SOAP
•
•
Remote software upload: via web server, SCP, HTTP,
HTTPS
TCP/IP
DHCP
•
•
1 x RS-232 for local control and diagnostics
Remote control and on-screen menu system
Direct DNS dialing
SECURITY FEATURES
DIRECTORY SERVICES
•
•
•
•
•
Management via HTTPS and SSH
IP Administration Password
Menu Administration Password
Disable IP services
•
•
•
Support for Local directories (My Contacts)
Corporate Directory
Unlimited entries using Server directory supporting
LDAP and H.350
Network Settings protection
•
Unlimited number for Corporate directory (through
TMS)
NETWORK INTERFACES **
1 x LAN/Ethernet (RJ-45) 10/100/1000 Mbit
•
•
•
•
200 number local directory
•
Received Calls with Date and Time
Placed Calls with Date and Time
Missed Calls with Date and Time
OTHER INTERFACES
•
•
•
USB host for future usage
USB device for future usage
GPIO for future usage
POWER
•
•
•
Auto-sensing power supply
100-120/200-240 VAC, 60/50Hz
Maximum power rating 800 Watt
PRECISIONHD 1080P CAMERA
•
•
•
1/3” CMOS
* requires option
•
Normal operation 650 Watt
12 x zoom
** only one LAN/Ethernet interface supported
+15°/-25° tilt, +/- 90° pan
D14324.04—DECEMBER 2009
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile series with Codec C60
Administrator Guide
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
U.S. HEADQUARTERS
EUROPEAN HEADQUARTERS
TANDBERG
TANDBERG
1212 Avenue of the Americas
24th Floor
Philip Pedersens vei 20
1366 Lysaker
New York, NY 10036
Norway
Telephone: +1 212 692 6500
Fax: +1 212 692 6501
Telephone: +47 67 125 125
Fax: +47 67 125 234
Video: +47 67 126 126
E-mail: tandberg@tandberg.com
Video: +1 212 692 6535
E-mail: tandberg@tandberg.com
D14324.04—DECEMBER 2009
90
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Sharp Blu ray Player BD HP25A User Manual
Shiro Modem ADSL 2 2+ Ethernet Modem User Manual
Silvercrest Clock KH 2600 User Manual
Sony DVD Recorder RDR HXD910 User Manual
Sony Speaker SS F6000 User Manual
Sony VCR SLV SX730N User Manual
Spectra Karaoke Machine AI166 User Manual
StarTechcom Network Card USB31000NDS User Manual
SUPER MICRO Computer Computer Hardware H8DCT HLN4F User Manual
Swann DVR DVR4 8600 User Manual