Symphonic DVD VCR Combo WF803 User Manual

OWNER’S  
MANUAL  
DVD PLAYER with VIDEO CASSETTE RECORDER  
WF803  
ReWritable  
Recordable  
POWER  
OPEN/CLOSE  
CHANNEL  
STOP/EJECT  
PLAY  
DVD  
VCR  
VIDEO  
AUDIO  
OUTPUT  
REC  
PLAY DISC IN  
DVD  
VCR TIMER/REC  
STOP  
SKIP/REV  
PLAY  
FWD/SKIP  
REW  
F.FWD  
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.  
If you need additional assistance for set-up or operating  
-
-
after reading owner’s manual, please call TOLL FREE : 1 800 242-7158  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please read before using this equipment.  
IMPORTANT SAFEGUARDS  
1. Read Instructions - All the safety and operating instructions  
ing of the mast and supporting structure, grounding of the  
lead-in wire to an antenna discharge unit, size of grounding  
conductors, location of antenna-discharge unit, connection  
to grounding electrodes, and requirements for the grounding  
electrode. (Fig. A)  
should be read before the appliance is operated.  
2. Retain Instructions- The safety and operating instructions  
should be retained for future reference.  
3. Heed Warnings - All warnings on the appliance and in the  
operating instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions  
should be followed.  
FIGURE A  
ANTENNA  
LEAD  
EXAMPLE OF ANTENNA GROUNDING  
WIRE  
AS PER NATIONAL ELECTRICAL CODE  
GROUND  
CLAMP  
5. Cleaning - Unplug this video product from the wall outlet  
before cleaning. Do not use liquid cleaners or aerosol clean-  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ers.  
Use  
a
damp  
cloth  
for  
cleaning.  
EXCEPTION: A product that is meant for uninterrupted ser-  
vice and, that for some specific reason, such as the possibil-  
ity of the loss of an authorization code for a CATV convert-  
er, is not intended to be unplugged by the user for cleaning  
or any other purpose, may exclude the reference to unplug-  
ging the appliance in the cleaning description otherwise  
required in item 5.  
6. Attachments - Do not use attachments not recommended by  
the video product manufacturer as they may cause hazards.  
7. Water and Moisture- Do not use this video product near  
water, for example, near a bath tub, wash bowl, kitchen sink,  
or laundry tub, in a wet basement, or near a swimming pool,  
and the like.  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMP  
NEC NATIONAL ELECTRICAL CODE  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
S2898A  
14. Lightning - For added protection for this video product dur-  
ing a lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall out-  
let and disconnect the antenna or cable system. This will pre-  
vent damage to the video product due to lightning and  
power-line surges.  
15. Power Lines - An outside antenna system should not be  
located in the vicinity of overhead power lines or other elec-  
tric light or power circuits, or where it can fall into such  
power lines or circuits. When installing an outside antenna  
system, extreme care should be taken to keep from touching  
such power lines or circuits as contact with them might be  
fatal.  
8. Accessories - Do not place this video  
product on an unstable cart, stand, tripod,  
bracket, or table. The video product may  
fall, causing serious injury to a child or  
adult, and serious damage to the appli-  
ance. Use only with a cart, stand, tripod,  
bracket, or table recommended by the  
16. Overloading - Do not overload wall outlets and extension  
manufacturer, or sold with the video  
cords as this can result in a risk of fire or electric shock.  
product. Any mounting of the appliance should follow the  
manufacturer's instructions and should use a mounting  
accessory recommended by the manufacturer. An appliance  
and cart combination should be moved with care. Quick  
stops, excessive force, and uneven surfaces may cause the  
appliance and cart combination to overturn.  
17. Object and Liquid Entry - Never push objects of any kind  
into this video product through any openings as they may  
touch dangerous voltage points or short-out parts that could  
result in a fire or electric shock. Never spill liquid of any  
kind on the video product.  
18. Servicing - Do not attempt to service this video product  
yourself as opening or removing covers may expose you to  
dangerous voltage or other hazards. Refer all servicing to  
qualified service personnel.  
19. Damage Requiring Service - Unplug this video product from  
the wall outlet and refer servicing to qualified service per-  
sonnel under the following conditions:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the  
9. Ventilation - Slots and openings in the cabinet are provided  
for ventilation and to ensure reliable operation of the video  
product and to protect it from overheating, and these open-  
ings must not be blocked or covered. The openings should  
never be blocked by placing the video product on a bed,  
sofa, rug, or other similar surface. This video product should  
not be placed in a built-in installation such as a bookcase or  
rack unless proper ventilation is provided or the manufac-  
turer's instructions have been adhered to.  
10. Power Sources - This video product should be operated only  
from the type of power source indicated on the marking  
label. If you are not sure of the type of power supply to your  
home, consult your appliance dealer or local power compa-  
ny. For products intended to operate from battery power, or  
other sources, refer to the operating instructions.  
11. Grounding or Polarization - This video product is equipped  
with a polarized alternating-current line plug (a plug having  
one blade wider than the other). This plug will fit into the  
power outlet only one way. This is a safety feature. If you are  
unable to insert the plug fully into the outlet, try reversing  
the plug. If the plug should still fail to fit, contact your elec-  
trician to replace your obsolete outlet. Do not defeat the  
safety purpose of the polarized plug.  
12. Power Cord Protection - Power supply cords should be rout-  
ed so that they are not likely to be walked on or pinched by  
items placed upon or against them, paying particular atten-  
tion to cords at plugs, convenience receptacles, and the point  
where they exit from the appliance.  
video product.  
c. If the video product has been exposed to rain or water.  
d. If the video product does not operate normally by following  
the operating instructions. Adjust only those controls that  
are covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will  
often require extensive work by a qualified technician to  
restore the video product to its normal operation.  
e. If the video product has been dropped or damaged in any  
way.  
f. When the video product exhibits a distinct change in perfor-  
mance this indicates a need for service.  
20. Replacement Parts - When replacement parts are required,  
be sure the service technician has used replacement parts  
specified by the manufacturer or have the same characteris-  
tics as the original part. Unauthorized substitutions may  
result in fire, electric shock or other hazards.  
21. Safety Check - Upon completion of any service or repairs to  
this video product, ask the service technician to perform  
safety checks to determine that the video product is in prop-  
er operating condition.  
22. Heat - This video product should be situated away from heat  
sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
13. Outdoor Antenna Grounding - If an outside antenna or cable  
system is connected to the video product, be sure the anten-  
na or cable system is grounded so as to provide some pro-  
tection against voltage surges and built-up static charges.  
Article 810 of the National Electrical Code, ANSI/NFPA  
No. 70, provides information with regard to proper ground-  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
A NOTE ABOUT RECYCLING  
This products packaging materials are recyclable and can be reused. Please dispose of all materials in  
accordance with your local recycling regulations.  
Batteries should never be thrown away or incinerated but disposed of in accordance with your local  
regulations concerning chemical wastes.  
The serial number of this product may be found on the back of the DVD/VCR COMBINATION UNIT. This ser-  
ial number is unique to your machine. You should record the number and other vital information here and retain  
this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not  
kept on file.  
Date of Purchase  
Dealer Purchase from  
Dealer Address  
Dealer Phone No.  
Model No.  
Serial No.  
ABOUT COPYRIGHT  
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.  
This product incorporates copyright protection technology that is protected by method claims of certain U.S.  
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use  
of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for  
home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
SUPPLIED ACCESSORIES  
RF Cable  
Owners Manual  
Remote control Two AA batteries  
A/V cables  
Owner's Manual  
(NA220UD)  
(NA270UD)  
(approx. 3 feet (100 cm)  
long) (WPZ0102TM015)  
(WPZ0901TM002)  
(0VMN03747)  
SYMBOLS USED IN THIS MANUAL  
The following symbols below appear in some headings and notes in this manual, with the following meanings  
VCR  
: Description refers to playback of video cassette tapes.  
DVD-V  
: Description refers to playback of DVD video discs.  
CD  
: Description refers to playback of audio CDs.  
MP3  
: Description refers to playback of MP3 discs.  
QUICK  
: Description refers to the items to be set in the QUICK mode.  
EN  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
TABLE OF CONTENTS  
LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
GENERAL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
DISC MENU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
STEP BY STEP PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . 23  
RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
FAST FORWARD / REVERSE SEARCH . . . . . . . . . . . . . . . 23  
SLOW FORWARD / SLOW REVERSE . . . . . . . . . . . . . . . . 23  
ZOOM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
TRACK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
TITLE / CHAPTER SEARCH. . . . . . . . . . . . . . . . . . . . . . . . 24  
TIME SEARCH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
PROGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
MP3 PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
ON-SCREEN INFORMATION . . . . . . . . . . . . . . . . . . . . . . . 26  
TRACK SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
PROGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
STEREO SOUND MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
CHANGING THE ON-SCREEN DISPLAY . . . . . . . . . . . . . 28  
PARENTAL CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
MARKER SETUP SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . 29  
DVD SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
AUDIO SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
BLACK LEVEL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
VIRTUAL SURROUND . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
DISPLAY SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
LANGUAGE SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . . . . 32  
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . 3  
ABOUT COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
SYMBOLS USED IN THIS MANUAL. . . . . . . . . . . . . . . . . . 4  
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
PLAYABLE DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
DISC TYPES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
OPERATING CONTROLS AND FUNCTIONS. . . . . . . . . . . 8  
LOADING THE BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . 11  
VCR/DVD SWITCHING . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
HOOKUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
CONNECTING TO A TV WITHOUT A/V TERMINALS. . . 13  
CONNECTING TO A TV WITH A/V TERMINALS. . . . . . . 13  
CONNECTING TO A TV THAT HAS AN S-VIDEO INPUT  
JACK OR COMPONENT VIDEO IN JACKS. . . . . . . . . . . . 14  
CONNECTING TO A STEREO AMPLIFIER EQUIPPED  
WITH DIGITAL INPUT JACKS SUCH AS MD DECK OR  
DAT DECK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
CONNECTING TO A RECEIVER WITH  
DOLBY DIGITAL DECODER . . . . . . . . . . . . . . . . . . . . . . . 15  
CONNECTING TO AN ANALOG AUDIO SYSTEM. . . . . . 15  
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
AUTOMATIC CHANNEL SET UP. . . . . . . . . . . . . . . . . . . . 16  
TO CHANGE THE ON-SCREEN LANGUAGE. . . . . . . . . . 17  
CLOCK SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
PLAYBACK FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
NORMAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
AUTO REPEAT PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . 18  
SEARCH FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
RECORDING FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . 19  
NORMAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
OTR (One Touch Recording). . . . . . . . . . . . . . . . . . . . . . . . . 19  
TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
HINTS FOR TIMER RECORDING . . . . . . . . . . . . . . . . . . . 20  
SPECIAL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
COPYING A VIDEO TAPE. . . . . . . . . . . . . . . . . . . . . . . . . . 21  
AUTO REWIND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
REAL TIME TAPE COUNTER. . . . . . . . . . . . . . . . . . . . . . . 22  
INDICE  
CONTROLES DEL FUNCIONAMIENTO Y SUS FUNCIONES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
CAMBIO DE VCR/DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
CONEXIONES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
CONEXION A UN TV SIN TERMINALES A/V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
CONEXION A UN TV CON TERMINALES A/V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
CONECTANDO A UN TV QUE TIENE TOMA DE ENTRADA DE S-VÍDEO o TOMAS DE ENTRADA DE VÍDEO COMPONENTE . . . 39  
CONEXION A UN AMPLIFICADOR ESTERO EQUIPADO CON TOMAS DE ENTRADA DIGITAL COMO UNA PLATINA  
DE MINIDISCOS O UNA PLATINA DE CINTAS AUDIODIGITALES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
CONEXION A UN RECEPTOR CON DESCODIFICADOR DIGITAL DOLBY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
CONEXION A UN SISTEMA DE AUDIO ANALOGICO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
PREPARACIÓN  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
PREPARACIÓN DE CANAL AUTOMÁTICA  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
PREPARACIÓN DE RELOJ  
REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
REPRODUCIENDO UN DVD, VIDEO O UN CD AUDIO  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
FEATURES  
¡Virtual Surround Sound  
DVD  
Mode  
¡Component Video Out Jacks  
¡Dolby Digital sound  
This DVD/VCR COMBINATION UNIT can output a  
Dolby Digital audio signal.  
Jacks located on the back of the DVD/VCR COMBINA-  
TION UNIT which are used to send high-quality video to  
a TV via Component Video In Jacks.  
¡Still/fast/slow/step playback  
¡Bit rate indication  
¡Random playback for audio CD and MP3  
¡Program playback for audio CD and MP3  
¡DVD menus in a desired language  
¡DRC (Dynamic range control)  
You can control the range of sound volume.  
¡Black Level Setting  
¡Screen saver/Auto power-off functions  
The screen saver program starts when there is no input  
from the player for five minutes in the stop mode. When  
the screen saver program is activated for 30 minutes, the  
power automatically turns off.  
VCR  
Mode  
Hardware specifications  
¡Auto Head Cleaner  
¡Trilingual on-screen menu display selectable in  
English, French, or Spanish  
¡Subtitles in a desired language  
¡Selecting a camera angle  
¡181 channel capability PLL frequency synthesiz-  
er tuner with direct station call  
(A cable converter box may be necessary to view scram-  
¡Choices for audio language and sound mode  
¡Parental lock  
bled cable channels.)  
¡Automatic detection of discs  
This player automatically detects if the loaded disc is  
Automatic functions  
DVD, audio CD or MP3 on disc.  
¡Auto power on system  
Automatically turns the VCR on when you insert the cas-  
sette.  
¡Playback MP3 disc  
¡Direct Search  
¡Digital Auto Tracking (DTR)  
¡On-screen display  
Information about the current operation can be displayed  
on the TV screen, allowing you to confirm the currently  
active functions (such as program playback), on the TV  
screen using the remote control.  
Playback  
¡Auto Repeat  
¡2 Step Picture Search Operation  
¡Index Search  
¡Search  
¡Time Search  
Chapter search / Title search / Track search / Time search  
Recording  
¡Repeat  
Chapter / Title / Track / Group / All / A-B  
¡1Year, 8 events (including Daily and WeeklyTimer  
Recording)  
¡Zoom  
¡OTR (One Touch Recording)  
¡Marker  
The part designated by user can be called back.  
¡Resume Play  
PRECAUTIONS  
AVOID THE HAZARDS OF  
INSTALLATION LOCATION  
ELECTRICAL SHOCK AND FIRE  
For safety and optimum performance of your  
DVD/VCR COMBINATION UNIT:  
Do not handle the power cord with wet hands.  
Do not pull on the power cord when disconnecting it  
from AC wall outlet. Grasp it by the plug.  
If, by accident, water is spilled on your DVD/VCR  
COMBINATION UNIT, unplug the power cord imme-  
diately and take the unit to our Authorized Service  
Center for servicing.  
Install the DVD/VCR COMBINATION UNIT in a hor-  
izontal and stable position. Do not place anything  
directly on top of the DVD/VCR COMBINATION  
UNIT. Do not place the DVD/VCR COMBINATION  
UNIT directly on top of the TV.  
Shield it from direct sunlight and keep it away from  
sources of intense heat. Avoid dusty or humid  
places. Avoid places with insufficient ventilation for  
proper heat dissipation. Do not block the ventilation  
holes on the sides of the DVD/VCR COMBINATION  
UNIT. Avoid locations subject to strong vibration or  
strong magnetic fields.  
Do not put your fingers or objects into the DVD/VCR  
COMBINATION UNIT cassette holder.  
MOISTURE CONDENSATION WARNING  
Moisture condensation may occur inside the unit when  
it is moved from a cold place to a warm place, or after  
heating a cold room or under conditions of high  
humidity. Do not use the DVD/VCR COMBINATION  
UNIT at least for 2 hours until its inside is dry.  
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
ABOUT THE DISCS  
PLAYABLE DISCS  
DISC TYPES  
The following discs can be played back on this  
DVD/VCR COMBINATION UNIT.  
[
]
DVD  
Data on a DVD is divided into sections called "titles", and  
then into subsections called "chapters", each of which is  
given a title or chapter number. Playback conditions are  
preset on some DVD video discs, and these playback con-  
ditions take priority over user operations on this player. If  
a function you selected does not run as desired, refer to  
the manual accompanying the disc.  
¡
¡
¡
¡
¡
¡
DVD video  
DVD+R/RW*  
CD-R/RW*  
DVD-R/RW*  
Audio CD  
MP3*  
* Depending on the types or the writing method of the  
medium some discs can not be played.  
Example  
Some DVD-R/RW, DVD+R/RW, or CD-R/RW discs  
made on personal computers, or on DVD recorders may  
not be played back properly due to factors such as  
scratches, dirt or special properties of the disc.  
Title 1  
Title 2  
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2  
Discs made on personal computers may not be played  
back properly due to different environments or the set-  
tings of the application you use. We recommend always  
to use the standardized, properly formatted discs.  
(Please contact the sales agency for more detail).  
[
]
AUDIO CD  
This player conforms to the NTSC color system. You can-  
not play discs recorded in other color systems such as  
PAL or SECAM.  
Data on an audio CD is divided into sections called  
tracks, each of which is given a track number.  
¡Some discs include region codes as shown below.  
Example  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
Track 6  
¡The number inside the symbol refers to a region of the  
world, and a disc encoded in a specific region format  
can only be played back on DVD/VCR COMBINA-  
TION UNIT with the same region code.  
The following discs cannot be played back on this  
DVD/VCR COMBINATION UNIT.  
[
]
MP3  
Data on an MP3 is divided into sections called "groups",  
and then into subsections called "tracks", each of which is  
given a group or track number.  
¡
¡
¡
DVD with region codes other than 1 or ALL.  
DVD-ROM  
Example  
Group 1  
Group 2  
DVD-RAM (Never play back, otherwise malfunc-  
tion may result.)  
Track 1  
Track 2  
Track 3  
Track 4  
Track 1  
Track 2  
¡
¡
¡
¡
¡
CD-ROM  
VSD  
CDV (Only plays back the audio part.)  
CD-G (Only plays back the sound.)  
CD-I (Never play back, otherwise malfunction  
may result.)  
¡
SACD  
¡
Photo CD (Never play back, otherwise malfunc-  
tion may result.)  
¡
Video CD (Never play back, otherwise malfunc-  
tion may result.)  
Any other discs without compatibility indications.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
OPERATING CONTROLS AND FUNCTIONS  
FRONT PANEL  
1
2
3
4
5
6 7  
8
POWER  
OPEN/CLOSE  
CHANNEL  
STOP/EJECT  
PLAY  
DVD  
VCR  
VIDEO  
AUDIO  
OUTPUT  
REC  
PLAY DISC IN  
DVD  
VCR TIMER/REC  
STOP  
SKIP/REV  
PLAY  
FWD/SKIP  
REW  
F.FWD  
24  
22 20  
23 21  
19  
18 16 14  
17 15  
12  
13  
10  
25  
11  
9
REMOTE CONTROL  
8. STOP/EJECT Button (VCR)  
55  
53  
26  
EJECT Button  
POWER SPEED AUDIO  
Press to remove the tape from the VCR.  
STOP Button  
27  
1
4
7
2
5
8
0
3
54  
52  
Press to stop the tape motion.  
9. PLAY Button(VCR) [page 18]  
Press to begin playback.  
SKIP/CH.  
6
28  
VCR/TV  
SLOW  
9
10. CHANNEL Buttons [page 16]  
In VCR mode, press to change TV channels on the  
VCR; press to adjust the tracking during normal or slow  
motion playback; press to remove vertical jitter in a Still  
picture.  
+
10  
DISPLAY DVD  
VCR  
PAUSE  
51  
49  
29  
31  
33  
50  
48  
30  
32  
11. AUDIO In Jack  
PLAY  
STOP  
Connect audio cable coming from the audio out jack of  
a camcorder, another VCR, or an audio source here.  
12. VIDEO In Jack [page 21]  
RECORD  
MENU  
Connect a video cable coming from the video out jack  
of a camcorder, another VCR, or a video source (laser  
disc player, camcorder, etc.) here.  
47  
45  
34  
36  
38  
ENTER  
46  
35  
37  
SETUP  
TITLE  
RETURN  
13. F.FWD Button (VCR) [page 18]  
SEARCH  
MODE  
CLEAR/  
MODE ZOOM  
C.RESET  
Press to rapidly advance the tape, or view the picture  
rapidly in forward during playback. (Forward Search).  
14. REW Button (VCR) [page 18]  
44  
42  
43  
41  
SUBTITLE ANGLE REPEAT  
A
B
39  
Press to rewind the tape, or to view the picture rapidly  
in reverse during the playback mode (Rewind Search).  
15. REC/OTR Button [page 19]  
T-SET  
40  
1. Disc loading tray  
2. OPEN/CLOSE Button [page 22]  
Press once to start a recording. Press repeatedly to start  
a One-Touch Recording.  
Press to insert discs into or remove them from the tray.  
3. DVD OUTPUT Light (Green) [page 12]  
This light appears when the DVD output mode is select-  
ed. You can only watch DVDs when the green DVD  
OUTPUT light is on. To make the green DVD OUT-  
PUT light come on, press DVD on the remote control or  
OUTPUT on the front panel.  
4. VCR OUTPUT Light (Green) [page 12]  
This light appears when the VCR output mode is select-  
ed. You can only watch tapes when the green VCR  
OUTPUT light is on. To make the green VCR OUTPUT  
light come on, VCR on the remote control or OUTPUT  
on the front panel.  
16. REC Light [page 19]  
Lights up during recording.  
17. TIMER REC Light [page 20]  
This light appears when the DVD/VCR is in standby  
mode for a timer recording or during a One-Touch  
Recording. It flashes if T-SET is pressed for a timer  
recording, but there is no tape in the DVD/VCR. It  
flashes when all timer recordings or One-Touch  
Recordings are finished.  
18. OUTPUT Button [page 12]  
Press to select DVD mode or VCR mode.  
GYou can switch the output mode either by pressing  
OUTPUT on the front panel, or by pressing DVD or  
VCR on the remote control. However, if you press  
OUTPUT on the front panel first, you need to re-  
select the corresponding mode by pressing DVD or  
VCR on the remote control.  
5. Cassette compartment  
6. POWER Button [page 16]  
Press to turn the power on and off.  
7. POWER Light  
This light appears when the power is on.  
EN  
8 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
19. Remote Sensor Window  
34. MENU Button  
20. DISC IN Light (green)  
GDVD mode [page 23]  
Press to display the menu of the Disc.  
GVCR mode [page 17]  
Press to access the VCR menu.  
35. TITLE Button [page 23]  
Light appears when a disc is in the DVD Player.  
21. PLAY Light (green)  
Light appears during Disc playback.  
22. FWD/SKIP Button (DVD) [page 23]  
Press to fast forward the Disc. Press PAUSE, then 36. SETUP Button [pages 28-31]  
press this button to begin slow motion playback.  
Press to enter DVD player setup mode.  
Press this button repeatedly to change the forward 37. ZOOM Button [page 24]  
speed of slow motion.  
Enlarges part of a DVD-reproduced image.  
Press to skip Chapters or Tracks.  
23. PLAY Button (DVD) [page 22]  
Press to begin playback.  
38. MODE Button [pages 26, 27, and 30]  
Activates program playback or random playback mode  
when playing CDs or MP3. Sets Black level and virtual  
surround.  
24. SKIP/REV Button (DVD) [page 23]  
Press to view the DVD picture in fast reverse motion 39. SUBTITLE Button [page 27]  
or to reverse playback of an Audio CD.  
Press to skip Chapters or Tracks.  
25. STOP Button (DVD) [page 22]  
Stops operation of the disc.  
Press to select the desired subtitle language.  
39. T-SET Button [page 20]  
Press to put the VCR into standby mode for a timer  
recording.  
26. SPEED Button [page 19]  
Press to select the VCRs recording speed (SP or SLP)  
27. POWER Button  
40. ANGLE Button [page 27]  
Press to change the camera angle to see the sequence  
being played back from a different angle.  
41. REPEAT Button [page 25]  
Repeats playback of the current disc, title, chapter or  
track.  
42. A-B REPEAT Button [page 25]  
Repeats playback of a selected section.  
43. SEARCH MODE Button  
GDVD mode [page 24]  
Press to turn the power on and off.  
28. Number Buttons  
GDVD mode [page 24]  
Press to select numbered items in a menu.  
+10  
Use this button to enter number 10 and above.  
GVCR mode [page 16]  
Press to select TV channels on the VCR.  
To select channels, enter channel numbers as a two-  
digit number for the quickest results. For example, to  
select channel 6, press 0 then 6.  
Press to access or remove the Search display,  
which allows you to go directly to a specific  
Title/Chapter/Track/Time.  
GVCR mode [page 18]  
29. DISPLAY Button  
Press to perform a Time Search or an Index Search.  
44. CLEAR/C.RESET Button  
GDVD mode [pages 24, 25]  
Press to reset the setting.  
GDVD mode [page 28]  
Press to access or remove the display screen during  
DVD or Audio CD playback.  
GVCR mode [page 21]  
Press to access or remove the VCRs on-screen status  
display.  
GVCR mode [page 18]  
Press to reset the counter. Press to exit from the  
MENU screen.  
30. DVD Button [page 12]  
45. RETURN Button [page 30]  
Press to select DVD mode for the remote control.  
GYou can switch the OUTPUT mode either by pressing  
GDVD mode  
Returns to the previous operation.  
OUTPUT on the front panel, or by pressing DVD or 46. Arrow Buttons  
VCR on the remote control. However, if you press  
OUTPUT on the front panel first, you need to re-  
select the corresponding mode by pressing  
DVD or VCR on the remote control.  
Use when making settings while watching the display  
on a TV screen.  
GVCR mode [page 16]  
p/o Buttons  
31. h Button  
Press to enter digits when setting program (For exam-  
ple: setting clock or timer program). Press to select  
the setting modes from the on screen menu.  
B Button  
GDVD mode [page 23]  
Press to view the DVD picture in fast reverse motion.  
Press PAUSE, then press this button to begin slow  
motion playback. Press this button repeatedly to  
change the reverse speed of slow motion.  
GVCR mode [page 18]  
When setting program (For example: setting clock or  
timer program), press to determine your selection and  
proceed to the next step you want to input. Press to  
determine the setting modes from the on screen  
menu. Press to add or delete channel numbers during  
channel preset.  
Press to rewind the tape, or to view the picture rapid-  
ly in reverse during the playback mode (Rewind  
Search).  
32. STOP Button  
s Button  
GDVD mode  
Press to cancel a setting of timer program. Press to  
correct digits when setting program (For example:  
setting clock or timer program). Press to add or delete  
channel numbers during channel preset.  
47. ENTER Button  
Press to stop the disc motion.  
GVCR mode  
Press to stop the tape motion.  
33. RECORD Button [page 19]  
Press once to start a recording.  
GDVD mode [page 22]  
Press to accept a setting.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
52. SLOW Button [page 18]  
During tape playback, press to view the video tape in  
slow motion. Press again to resume normal playback.  
This button does not affect DVD playback.  
53. VCR/TV Button [page 19]  
Use to select VCR or TV position.  
GVCR Position  
48. g Button  
GDVD mode [page 23]  
Press to fast forward the Disc. Press PAUSE, then  
press this button to begin slow motion playback.  
Press this button repeatedly to change the forward  
speed of slow motion.  
GVCR mode [page 18]  
To view playback, to monitor video recordings or to  
watch TV using the VCR tuner.  
GTV Position  
To watch TV or to view one program while recording  
another.  
Press to rapidly advance the tape, or view the picture  
rapidly in forward during playback (Forward Search).  
49. PLAY Button  
GDVD mode  
Press to begin playback.  
54. SKIP/CH. Buttons  
GVCR mode  
GDVD mode  
Press to begin playback.  
Press to skip Chapters or Tracks.  
GVCR mode  
50. VCR Button [page 12]  
Press to select VCR mode for the remote control.  
GYou can switch the OUTPUT mode either by pressing  
OUTPUT on the front panel, or by pressing DVD or  
VCR on the remote control. However, if you press  
OUTPUT on the front panel first, you need to re-  
select the corresponding mode by pressing DVD or  
VCR on the remote control.  
Press to change TV channels on the VCR.  
55. AUDIO Button [page 27]  
Press to select a desired audio language or sound mode.  
51. PAUSE Button  
Notes  
GDVD mode [page 22]  
¡To use the remote control to operate the DVD/VCR  
COMBINATION UNIT and its features, press DVD  
on the remote control before pressing other DVDs  
operation buttons. Verify that the green DVD OUT-  
PUT Light is on.  
Press to pause Disc playback. Press repeatedly to  
advance the DVD picture step by step (or one frame  
at a time).  
GVCR mode [page 19]  
While recording, press to temporarily stop the record-  
ing (pause). Press a second time to resume normal ¡To use the remote control to operate the VCR and its  
recording. You can not pause  
a
One-Touch  
features, press VCR on the remote control before  
pressing other VCRs operation buttons. Verify that  
the green VCR OUTPUT Light is on.  
Recording. Or, press during tape playback to freeze  
the picture. Press to advance the picture one frame at  
a time during still mode.  
REAR VIEW  
56 57  
58  
59  
60  
DVD  
DVD/VCR  
VCR  
AUDIO OUT  
S-VIDEO COMPONENT AUDIO  
DIGITAL  
AUDIO OUT  
OUT  
VIDEO OUT  
OUT  
ANT-IN  
L
Y
AUDIO IN  
Cb  
Cr  
L
R
COAXIAL  
ANT-OUT  
VIDEO OUT  
VIDEO IN  
R
66  
64  
62  
65  
63  
61  
56. ANT-IN (Antenna In) Jack  
59. AC Power Cord  
Connect your antenna, Cable Box, or Satellite decoder  
box.  
Connect to a standard AC outlet to supply power to the  
DVD/VCR COMBINATION UNIT.  
DVD Playback only  
57. DVD/VCR AUDIO OUT Jacks  
Connect the supplied audio cables here and to the Audio  
In jacks of a television or other audio equipment.  
58. AUDIO IN Jack  
60. COMPONENT VIDEO OUT Jacks  
Connect optional component video cables here and to  
the component Video In jacks of a television.  
61. COAXIAL Jack  
Connect audio cable coming from the audio out jack of  
a camcorder, another VCR, or an audio source here.  
Connect an optional coaxial digital audio cable here and  
to the Coaxial Digital Audio In jack of a decoder or  
audio receiver.  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
62. DVD ANALOG AUDIO OUT Jacks  
Connect the supplied audio cables here and to the Audio  
In jacks of a television or other audio equipment (DVD  
only).  
65. DVD/VCR VIDEO OUT Jack  
Connect the yellow video cable (supplied) here and to  
the TVs Video In jack.  
66. ANT-OUT (Antenna Out) Jack  
Use the supplied RF coaxial cable to connect this jack  
to the ANTENNA IN Jack on your TV.  
63. S-VIDEO OUT Jack  
Connect an optional S-Video cable here and to the S-  
Video In jack of a television. (DVD only)  
64. VIDEO IN Jack  
Caution: Do not touch the inner pins of the jacks on  
the rear panel. Electrostatic discharge may cause  
permanent damage to the player.  
Connect a cable coming from the video out jack of a  
camcorder, another VCR, or an audio-visual source  
(laser disc player, video disc player, etc.) here.  
LOADING THE BATTERIES  
1. Open the battery compartment  
cover.  
2. Insert two AA batteries, with each  
one oriented correctly.  
3. Close the cover.  
Notes  
¡Do not mix alkaline and manganese batteries.  
¡Do not mix old and new batteries.  
EN  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
VCR/DVD SWITCHING  
Because this product is a combination of a VCR and DVD player, you must first select  
which component you wish to operate with the OUTPUT BUTTON.  
VCR MODE  
DVD MODE  
Press VCR on the remote control.  
(Verify that the VCR OUTPUT Light is lit.)  
Press DVD on the remote control.  
(Verify that the DVD OUTPUT Light is lit.)  
Notes  
¡Pressing only OUTPUT on the front panel does not switch the mode of the remote control. You always need  
to select the correct mode on the remote control too.  
POWER  
OPEN/CLOSE  
CHANNEL  
STOP/EJECT  
PLAY  
POWER SPEED AUDIO  
DVD  
VCR  
VIDEO  
AUDIO  
OUTPUT  
REC  
PLAY DISC IN  
DVD  
VCR TIMER/REC  
STOP  
SKIP/REV  
PLAY  
FWD/SKIP  
REW  
F.FWD  
1
4
7
2
5
8
0
3
SKIP/CH.  
6
VCR/TV  
SLOW  
9
+
10  
DVD button  
DVD OUTPUT Light  
DISPLAY DVD  
VCR  
PAUSE  
VCR button  
OUTPUT  
PLAY  
STOP  
DVD  
VCR TIM  
RECORD  
MENU  
VCR OUTPUT Light  
ENTER  
SETUP  
TITLE  
RETURN  
SEARCH  
MODE  
CLEAR/  
MODE ZOOM  
C.RESET  
OUTPUT button  
SUBTITLE ANGLE REPEAT  
A
B
T-SET  
EN  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
HOOKUPS  
CAUTION:  
¡Be sure to turn off the DVD/VCR COMBINATION UNIT and equipment to be connected.  
¡Read through the operation manual for the equipment to be connected.  
¡Be sure that the colors of the jacks and plugs match up when using VIDEO/AUDIO cables.  
¡Be sure to keep the DVD/VCR COMBINATION UNIT connection cables separate from the TV antenna cable  
when you install the DVD/VCR COMBINATION UNIT, because it may cause electrical interference when you  
are watching television programs.  
CONNECTING TO A TV WITHOUT A/V TERMINALS  
1. Disconnect the AC power cord of the TV from the  
[VHF/UHF  
[Back of the DVD/VCR]  
[Indoor antenna]  
AC outlet.  
combination antenna]  
[Back of the  
UHF/VHF combination TV]  
2. Disconnect the antenna or cable from the TV.  
3. Connect the antenna or cable to the ANT-IN jack of  
the DVD/VCR COMBINATION UNIT.  
4. Connect the DVD/VCR COMBINATION UNIT to  
the TV using the RF cable.  
5. Plug the AC power cords of the DVD/VCR COM-  
BINATION UNIT and TV into the AC outlets.  
DVD/VCR  
VCR  
RF cable  
(supplied)  
OR  
OR  
AUDIO OUT  
ANT-IN  
L
UHF/VHF  
[Cable box or satellite box]  
AUDIO IN  
R
IN  
ANT-OUT  
VIDEO OUT  
OUT  
VIDEO IN  
From Cable or  
Satellite Company  
RF OUTPUT CHANNEL for DVD/VCR  
1. Connect the DVD/VCR COMBINATION UNIT to a TV using RF cable (see above steps).  
2. Select channel 3 on your TV.  
3. Press PLAY.  
¡If noise appears, change the RF output channel of the DVD/VCR COMBINATION UNIT to channel 4 by  
pressing PLAY on the VCR for 3 seconds during playback.  
¡
There is case that the RF output channel does not change by situation (For example, when you adjust tracking using  
(
)
CHANNEL  
).  
In this case, stop the playback, and start the playback again. After that, press PLAY on the VCR for 3 seconds.  
If there is a power failure or the DVD/VCR COMBINATION UNIT is unplugged for more than 30 seconds, the RF  
¡
output channel setting will return to CH3  
.
Note to CATV system installer  
This reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that pro-  
vides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected  
to the grounding system of the building, as close to the point of cable entry as practical.  
CONNECTING TO A TV WITH A/V TERMINALS  
DVD  
DVD/VCR  
VCR  
AUDIO OUT  
S-VIDEO COMPONENT AUDIO  
DIGITAL  
AUDIO OUT  
OUT  
VIDEO OUT  
OUT  
Antenna/Cable signal  
A/V-compatible or  
ANT-IN  
Y
AUDIO IN  
Cb  
Cr  
L
COAXIAL  
ANT-OUT  
VIDEO OUT  
DEO IN  
R
wide screen TV  
To ANT. IN  
of TV  
To VIDEO INPUT jack  
To Right (red) and Left (white)  
To AUDIO INPUT jacks  
To VIDEO OUT jack  
[Fig. 1]  
To AUDIO OUT jacks  
Notes  
¡Connect the DVD/VCR COMBINATION UNIT directly to a TV. If the A/V cables are connected into a  
VCR first, picture may be distorted due to the copy protection system.  
EN  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
CONNECTING TO A TV THAT HAS AN S-VIDEO INPUT JACK OR  
COMPONENT VIDEO IN JACKS  
FOR TVs WITH S-VIDEO INPUT JACK  
Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy higher quality pic-  
tures.  
The S-Video connection only supplies video (picture) in the DVD mode of the DVD/VCR COMBINATION  
UNIT. Therefore, in order to use the VCR features or view TV channels on the DVD/VCR COMBINATION  
UNIT, you still need to either connect the RF cable between the ANT-OUT jack of the DVD/VCR COMBINA-  
TION UNIT and the TVs Antenna In jack, or connect the yellow video cable as described earlier (Fig.1).  
To connect the supplied RF cable, see page 13.  
DVD  
DVD/VCR  
VCR  
AUDIO OUT  
S-VIDEO COMPONENT AUDIO  
DIGITAL  
AUDIO OUT  
OUT  
VIDEO OUT  
OUT  
ANT-IN  
L
Y
A/V-compatible or  
wide screen TV  
AUDIO IN  
Cb  
Cr  
L
R
COAXIAL  
ANT-OUT  
VIDEO OUT  
VIDEO IN  
R
To S-VIDEO INPUT jack  
To S-VIDEO OUT jack  
To Right (red) and Left (white)  
To AUDIO INPUT jacks  
[Fig. 2]  
To AUDIO OUT jacks  
FOR TVs WITH  
COMPONENT VIDEO IN JACKS  
Use a component video cable (commercially available) in place of the yellow DVD/VCR video cable and S-  
VIDEO jack to enjoy higher quality pictures.  
The component video connection only supplies video (picture) in the DVD mode of the DVD/VCR COMBI-  
NATION UNIT. Therefore, in order to use the VCR features or view TV channels at the DVD/VCR COMBI-  
NATION UNIT, you still need to either connect the RF coaxial cable between the ANT-OUT jack of the  
DVD/VCR COMBINATION UNIT and the TVs Antenna In jack, or connect the yellow VCR video cable as  
described earlier (Fig. 1). To connect the supplied RF cable, see page 13.  
To Right (red) and Left (white)  
AUDIO OUTPUT jacks  
To Right (red) and Left (white)  
AUDIO INPUT jacks  
A/V-compatible  
or  
wide screen TV  
DVD  
DVD/VCR  
VCR  
AUDIO OUT  
S-VIDEO COMPONENT AUDIO  
DIGITAL  
OUT  
VIDEO OUT  
OUT  
AUDIO OUT  
ANT-IN  
L
Y
AUDIO IN  
Cb  
Cr  
L
R
COAXIAL  
ANT-OUT  
VIDEO OUT  
VIDEO IN  
R
To COMPONENT VIDEO  
INPUT jacks  
To COMPONENT VIDEO  
OUT jacks  
[Fig. 3]  
CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH  
DIGITAL INPUT JACKS SUCH AS MD DECK OR DAT DECK  
Use an audio coaxial digital cable (commercially available) for the audio connections.  
Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.  
DVD  
DVD/VCR  
VCR  
AUDIO OUT  
S-VIDEO COMPONENT AUDIO  
DIGITAL  
AUDIO OUT  
(Stereo Receiver)  
Amplifier equipped with digital  
input jacks, MD deck,  
DAT deck, etc.  
OUT  
VIDEO OUT  
OUT  
ANT-IN  
L
Y
AUDIO IN  
Cb  
Cr  
L
R
COAXIAL  
ANT-OUT  
VIDEO OUT  
VIDEO IN  
R
To COAXIAL DIGITAL  
AUDIO OUT jack  
[Fig. 4]  
To COAXIAL DIGITAL AUDIO INPUT jack  
Notes  
¡The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital  
sound by an MD or DAT deck.  
¡Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a DVD disc using incorrect set-  
tings may generate noise distortion, and may also damage the speakers. (See page 29 to set DOLBY DIGITAL  
to OFF.)  
EN  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
CONNECTING TO A RECEIVER WITH DOLBY DIGITAL DECODER  
If using this DVD/VCR COMBINATION UNIT to play a DVD disc in 5.1 channel Dolby Digital surround, the  
DVD/VCR COMBINATION UNIT outputs a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO  
OUT jack. By hooking the DVD/VCR COMBINATION UNIT up to a Dolby Digital receiver, you can enjoy a  
more convincing, realistic ambience with powerful and high-quality surround sound as heard in movie theaters.  
Use an audio coaxial digital cable (commercially available) for the audio connections.  
DVD  
DVD/VCR  
VCR  
AUDIO OUT  
S-VIDEO COMPONENT AUDIO  
DIGITAL  
AUDIO OUT  
OUT  
VIDEO OUT  
OUT  
ANT-IN  
L
Y
AUDIO IN  
Cb  
Cr  
L
R
COAXIAL  
ANT-OUT  
VIDEO OUT  
VIDEO IN  
R
Center speaker  
Front speaker  
(right)  
Front speaker  
(left)  
To COAXIAL DIGITAL  
AUDIO OUT jack  
Receiver with  
Dolby Digital Decoder  
To COAXIAL DIGITAL  
AUDIO INPUT jack  
Subwoofer  
Surround  
speaker  
(left)  
Surround  
speaker  
(right)  
[Fig. 5]  
¡If the output is Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to ON for audio  
output in the setup mode.  
¡Unless connected to a Dolby Digital receiver, set DOLBY DIGITAL to OFF for audio output in the setup mode.  
Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers  
.
Manufactured under license from Dolby Laboratories. Dolbyand the double-D symbol are trademarks of  
Dolby Laboratories.  
CONNECTING TO AN ANALOG AUDIO SYSTEM  
DVD  
DVD/VCR  
VCR  
AUDIO OUT  
S-VIDEO COMPONENT AUDIO  
DIGITAL  
AUDIO OUT  
OUT  
VIDEO OUT  
OUT  
ANT-IN  
L
Y
O IN  
Cb  
Cr  
L
R
COAXIAL  
ANT-OUT  
VIDEO OUT  
VIDEO IN  
R
Stereo system  
To Right (red) and Left (white)  
AUDIO INPUT jacks  
or  
To ANALOG AUDIO INPUT jacks  
To Right (red) and Left (white)  
ANALOG AUDIO OUT jacks  
[Fig. 6]  
Notes  
¡Be sure to turn off the power to all components in the system before connecting another component.  
¡Refer to the Owner's Manuals for stereo systems and any other components to be connected to the DVD/VCR  
COMBINATION UNIT.  
EN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
SETUP  
AUTOMATIC CHANNEL SET UP  
6
After scanning, the tuner stops on the low-  
est memorized channel. The TV screen  
returns to TV mode.  
VCR  
You can automatically program the tuner to scan only  
the channels you receive in your area.  
¡If AUTO SET UPappears on the TV screen again,  
check the cable connections. Press B once again and  
the VCR will begin preset again.  
¡Channel memory programming is NOT needed  
when you connect the VCR to a cable box or a satel-  
lite box as in "CONNECTING TO A TV WITHOUT  
A/V TERMINALS" on page 13. In this case, select  
channel 3 on your TV. Then, the channel you want to  
record or view may be selected at the cable box or  
satellite box.  
¡If noise appears, change the RF output channel of  
the VCR to channel 4 by pressing PLAY for 3 sec-  
onds during playback. Then select the same chan-  
nel (CH4) on your TV.  
TO SELECT A DESIRED CHANNEL  
You can select the desired channel by using CHAN-  
NEL (o/p) or by directly pressing Number on the  
remote control.  
Note for using the Number:  
¡When selecting cable channels which are higher  
than 99, enter channel numbers as a three-digit num-  
ber.(For example: 117, press 1,1,7)  
¡You must precede single-digit channel numbers with  
a zero (For example: 02, 03, 04 and so on).  
¡Follow the steps below once. Repeat only if there  
is a power failure or if the VCR is unplugged for  
more than 30 seconds. (In these cases, the pro-  
grammed channels are erased.)  
¡You must follow the steps below before attempting  
to play or record a video tape. If you want to play  
or record a video tape BEFORE programming the  
tuner, you can cancel it by pressing  
TO PRESET THE CHANNELS AGAIN  
1
Press MENU until the main menu appears.  
(If you have already set the clock, you only  
have to press it once. If not, you have to  
press it twice).  
CLEAR/C.RESET.  
1
You need to connect the antenna or cable to  
the VCR first. Then, connect the DVD /VCR  
power plug to a standard AC outlet.  
2
3
Select CHANNEL SET UPby pressing  
or L. Then, press B.  
K
2
Turn on the TV and set the TV to channel 3.  
¡If noise appears, change the RF output channel of  
the VCR to channel 4 by pressing PLAY for 3 sec-  
onds during playback. Then select the same chan-  
nel (CH4) on your TV. (See RF OUTPUT  
CHANNELon page 13 for the detail.)  
Select AUTO SET UPby pressing K or L.  
Then, press B.  
¡After scanning, the tuner stops on the lowest memo-  
rized channel.  
3
4
Turn on the VCR by pressing POWER. the  
POWER light will come on.  
Select the On Screen Language (ENG-  
LISH, FRANCAISor  
ESPAÑOL) by pressing  
K
or L. Then, press B.  
5 Begin channel preset by pressing B once.  
The tuner scans and memorizes all active  
channels in your area.  
CH 01  
¡The VCR distinguishes between  
standard TV channels and cable  
channels.  
AUTO SET UP  
EN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
TO ADD/DELETE CHANNELS  
CLOCK SET UP  
When scanning, some channels may be skipped due to  
a weak signal. In such cases, you can add the channels  
to the VCR memory manually.  
VCR  
1
Select main menu by pressing MENU.  
1
Press MENU until the main menu appears.  
¡If the clock is not set, the CLOCK SET menu  
appears first. In this case, follow step [3].  
(If you have already set the  
- MENU -  
TIMER PROGRAMMING  
[OFF]  
AUTO REPEAT  
CHANNEL SET UP  
CLOCK SET  
clock, you only have to  
press it once. If not you  
have to press it twice).  
LANGUAGE SELECT  
2
3
Select "CLOCK SET" by pressing K or L.  
Then, press B.  
Set the clock.  
2
3
4
5
Select "CHANNEL SET UP" by pressing  
K
or L. Then, press B.  
1) Set the month  
Select "MANUAL SET UP" by pressing K or  
L. Then, press B.  
Press K or L repeatedly.  
Then, press B.  
Enter the desired channel number by press-  
ing K or L.  
2) Set the day  
Press K or L repeatedly.  
Then, press B.  
Add or Delete it from memory by pressing  
B or s so that "ADD" or "DELETE" flashes  
on the TV screen accordingly.  
3) Set the year  
Press K or L repeatedly.  
Then, press B.  
The day of the week will appear automatically.  
6
Exit the Preset mode by pressing  
CLEAR/C.RESET.  
4) Set the hour  
Press K or L repeatedly.  
Then, press B.  
TO CHANGE THE ON-SCREEN  
LANGUAGE  
5) Set the minute  
Press K or L repeatedly.  
Then, press B.  
VCR  
1
Press MENU twice to call up the main  
menu. (If you have already set the clock,  
you only have to press it once).  
6) Set AM or PM  
CLOCK SET  
MONTH DAY  
YEAR  
Press K or L repeatedly.  
03 17 MON 2003  
/
HOUR MINUTE AM/PM  
05  
:
40  
PM AM  
PM  
2
3
Select "LANGUAGE SELECT" by pressing  
or L. Then, press B.  
K
¡To go back one step, press s.  
Select "ENGLISH", "FRANCAIS" or  
"ESPAÑOL" by pressing K or L. Then, press  
CLEAR/C.RESET.  
4
Start the clock by pressing  
CLEAR/C.RESET or B.  
¡If you accidentally select Spanish or French and  
need English: Press MENU and choose SELEC.  
IDIOMA, or SELECTION LANGUE. Press B,  
and select ENGLISH by pressing K or L.  
Finally, press CLEAR/C.RESET.  
EN  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
PLAYBACK FUNCTION  
NORMAL PLAYBACK  
2
3
Select "AUTO REPEAT" by pressing K or L.  
VCR  
Begin auto repeat playback by pressing  
so that ON appears next to "AUTO  
REPEAT".  
B
1
Insert a prerecorded tape. The VCR will turn  
on.  
¡If the safety tab has been removed, the  
VCR will start playback automatically.  
¡
If the on-screen menu still remains, CLEAR/C.RESET  
to exit the menu.  
¡To cancel the Auto repeat mode, press B at step [3]  
so that OFF appears next to "AUTO REPEAT".  
2
Turn on the TV and set the TV to channel 3.  
¡
If noise appears, change the RF output channel of the  
VCR to channel 4 by pressing PLAY for 3 seconds dur-  
ing playback. Then select the same channel (CH4) on  
your TV. (See RF OUTPUT CHANNELon page 13  
for the detail.)  
SEARCH FUNCTIONS  
VCR  
PICTURE SEARCH  
3
Begin playback by pressing PLAY.  
If you want to skip or repeat a scene during playback,  
press D or E.  
¡Tracking adjustment will be done automatically  
(Digital Tracking function) when you start playback.  
To adjust the tracking manually, press SKIP/CH. on  
the remote or CHANNEL (o/p) on the VCR.  
¡Press it again and the VCR will now search at super  
high speed. (in the LP/SLP modes only).  
INDEX SEARCH  
¡When a tape has reached the end, the VCR will  
rewind the tape to the beginning, and eject the tape.  
An index mark will be assigned at the beginning of  
each recording you made. You may skip to a specific  
marked point by following the steps below.  
4
To stop playback, press STOP.  
¡If no corresponding symbols appear on the display  
when you press buttons such as PLAY, RECORD,  
D or E, that means no cassette tape is in the  
VCR. Please insert a tape.  
1
2
Press SEARCH MODE so that the Index  
Search menu appears.  
Enter the number of recordings you wish to  
skip by pressing K or  
L
INDEX SEARCH  
03  
Counter Reset  
within 30 seconds.  
¡You can reset the counter by pressing  
CLEAR/C.RESET on the remote control twice.  
STILL/SLOW  
3
Press B or { to start index search.  
You can freeze the picture on TV screen by pressing  
PAUSE during playback.  
¡If you want to go in the forward direction, press B.  
¡If you want to go in the reverse direction, press {.  
¡If you want to stop search function, press STOP.  
¡After index search, the VCR will play the tape auto-  
matically.  
¡You can advance the picture one frame at a time by  
pressing PAUSE during the Still mode.  
¡You cannot manually adjust the tracking of a still  
picture. However, if the picture begins to vibrate  
vertically during the still mode, you can stabilize the  
picture by pressing CHANNEL (o/p).  
TIME SEARCH  
This feature allows you to go to a specific point on a  
tape by entering the exact amount of time you wish to  
skip in order to reach the point.  
¡If the picture is distorted or rolling vertically, adjust  
the vertical hold control on your TV, if so equipped.  
¡You can watch in the slow motion by pressing  
SLOW during playback or the still mode.  
¡If a noise bar appears on the TV screen, you can  
reduce it by pressing CHANNEL (o/p).  
¡After the VCR has been in Still/Slow mode for 5  
minutes, it will stop automatically to protect the tape  
and the video head from damage.  
1
2
Press SEARCH-MODE so that the Time  
Search menu appears.  
TIME SEARCH  
2 : 50  
Enter your desired time to  
skip by pressing K or  
L
within 30 seconds.  
¡To return to playback, press PLAY.  
AUTO REPEAT PLAYBACK  
3
Press B or { to start time search.  
¡If you want to go in the forward direction, press B.  
¡If you want to go in the reverse direction, press {.  
¡If you want to stop search function, press STOP.  
¡After time search, the VCR will play the tape auto-  
matically.  
VCR  
This feature allows you to play a tape over and over.  
1
Select main menu by pressing MENU.  
EN  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
RECORDING FUNCTION  
Note  
OTR (One Touch Recording)  
You can not copy a DVD to a videotape  
VCR  
VCR  
This feature allows you to set the recording length sim-  
ply by pressing REC/OTR on the VCR.  
It may be UNLAWFUL to record copy-  
righted material without the consent of  
the copyright owner.  
Accidental Erasure Prevention  
To prevent accidental recording on a  
recorded cassette, remove its record safety tab. To  
record on it later, cover the hole with cellophane tape.  
Before recording, make sure:  
1
Press REC/OTR to begin OTR. The TIMER  
REC light comes on. Change the recording  
length by pressing REC/OTR repeatedly.  
Record safety tab  
REC  
OTR(0:30)  
OTR(1:00).....  
(Normal recording)  
¡The desired channel is selected by pressing Number  
on the remote control or CHANNEL (o/p). (If you  
connected the VCR to a cable box or satellite box as  
in "CONNECTING TO A TV WITHOUT A/V  
TERMINALS" on page 13, select channel 3 on your  
TV, and select the specific INPUT channel assigned  
by your cable box or your satellite box on the  
DVD/VCR COMBINATION UNIT. Then, select the  
channel you want to record with the cable box or the  
satellite box. In this case, you can ONLY record and  
view the SAME channel.)  
OTR(8:00)  
OTR(7:30)  
¡
If a tape ends during OTR, the VCR will stop, eject  
the tape, and switch to the DVD mode automatically  
as the TIMER REC light blinks. (If the DVD power  
is off, the VCR will become STANDBY status)  
.
¡When OTR is finished , the VCR turns off automat-  
ically. To use the VCR again, press T-SET on the  
remote, or STOP/EJECT on the DVD/VCR COM-  
BINATION UNIT.  
¡If noise appears, change the RF output channel of  
the VCR to channel 4 by pressing PLAY for 3 sec-  
onds during playback. Then select the same chan-  
nel (CH4) on your TV.  
¡There is a tape with a safety tab in the VCR.  
¡The desired recording speed is selected in SP (stan-  
dard play) or SLP (super long play) mode by press-  
ing SPEED on the remote control.  
TIMER RECORDING  
VCR  
You may set the VCR to start recording while you are  
away. You can set eight programs to record on specif-  
ic days, daily or weekly within 1 year period.  
Tape Speed  
Recording/Playback Time  
Type of tape  
SP mode  
SLP mode  
T60  
1 hour  
3 hours  
T120  
2 hours  
6 hours  
T160  
2-2/3 hours  
8 hours  
If you have not yet set the clock, "CLOCK SET"  
appears. If so, follow the steps [3] and [4] in  
"CLOCK SET UP" section on page 17. Then, set  
the timer recording.  
NORMAL RECORDING  
1
Insert a tape with its safety tab into the  
DVD/VCR COMBINATION UNIT.  
VCR  
1
Begin the recording by pressing RECORD.  
The REC Light comes on.  
2
3
Select main menu by pressing MENU.  
¡To temporarily stop recording or to resume it, press  
PAUSE. After the VCR has been in Pause mode for  
5 minutes, it will stop automatically to protect the  
tape and the video head from damage.  
TIMER PROGRAMMING  
Select "TIMER PROGRAM-  
MING" by pressing K or L.  
Then, press B. The set up  
screen is displayed.  
PROG  
DATE  
12345678  
-
START TIME  
END TIME  
CHANNEL  
REC SPEED  
2
Press STOP when the recording is completed.  
4
Set the timer.  
¡To go back one step, press s.  
Note  
¡When you wish to watch another program while  
recording, select desired channel on your TV. If  
noise appears press VCR/TV.  
¡This is not possible when using a cable box or  
satellite box.  
1) Set the program number (1-8)  
PROGRAM NUMBER  
4
DATE  
- - / - -  
START TIME - - : - - - -  
END TIME - - : - - - -  
CHANNEL - -  
REC SPEED - -  
Program number which is not set up  
flashes. Press K or L repeatedly  
for the desired program number.  
Then, press B.  
EN  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
¡If a tape ends during TIMER RECORDING, the  
VCR will stop, eject the tape, and switch to the DVD  
mode automatically as the TIMER REC light blinks.  
(If the DVD power is off, the VCR will become  
STANDBY status).  
2) Set the frequency of the recording  
For once: Press K or L to point to  
"ONCE".  
PROGRAM NUMBER  
4
ONCE  
DAILY  
WEEKLY  
For daily (Monday~Friday): Press  
or L to point to "DAILY".  
For weekly: Press K or L to point  
to "WEEKLY".  
K
¡
If a tape is not in the VCR or does not have a safety tab,  
the TIMER REC light flashes and timer recording will  
not operate. Please insert a recordable tape.  
Then, press B.  
¡
When all timer recordings are finished, the TIMER  
REC light will flash. To use the VCR again as usual,  
press T-SET to disable the flashing TIMER REC light,  
then press VCR/TV to select the VCR position. Select  
either VCR or DVD mode, then continue with the  
other features as described in this manual.  
ONE TIME PROGRAM  
PROGRAM NUMBER  
DATE - - / - -  
START TIME - - : - - - -  
END TIME - - : - - - -  
3) Set the date  
4
First, press K or L for the month.  
Then, press B. Next, press K or  
L for the day. Then, press B.  
CHANNEL  
- -  
REC SPEED - -  
¡
When timer recordings are set, the TIMER REC light  
will come on. To use the VCR as usual until the time for  
the recording, press T-SET so that TIMER REC light  
disappears. Press VCR/TV to choose the VCR position.  
Select either VCR or DVD mode, then continue with  
ONE TIME PROGRAM  
4) Set the start time  
PROGRAM NUMBER  
DATE 05 /12 MON  
START TIME - - : - - - -  
END TIME - - : - - - -  
CHANNEL - -  
REC SPEED - -  
4
First, press K or L for the hour.  
Then, press B. Next, press K or  
for the minute. Then, press B. And  
then, press K or L for AM or PM. Then, press B.  
L
the other features as described in this manual  
.
If you want to use the DVD player during  
a VCR timer recording or while the  
TIMER REC light is on or flashes.  
ONE TIME PROGRAM  
PROGRAM NUMBER  
DATE 05 /12 MON  
START TIME 07: 30 PM  
END TIME - - : - - - -  
5) Set the end time  
4
Follow the instructions of  
"Set the start time" to set  
the end time.  
¡
You can use the DVD player while the TIMER REC  
light is on or flashes, or during a timer recording.  
Press POWER to turn on the DVD. Press DVD on the  
remote control to choose DVD mode, then continue  
with the other DVD features as described in this man-  
ual. You dont have to set the TIMER off to use the  
DVD only.  
CHANNEL  
- -  
REC SPEED - -  
ONE TIME PROGRAM  
6) Set the channel number  
PROGRAM NUMBER  
DATE 05 /12 MON  
START TIME 07: 30 PM  
END TIME 08: 30 PM  
CHANNEL - -  
REC SPEED - -  
4
Press K or L repeatedly for the  
desired channel number. Then,  
press B.  
TO STOP AN AUTOMATIC TIMER PRO-  
GRAM ALREADY STARTED  
Press STOP/EJECT on the DVD /VCR COMBINA-  
TION UNIT.  
If you connected the DVD/VCR COMBINATION UNIT to  
a cable box or satellite box as in "DVD/VCR TO TV  
CONNECTION" on page 13, select the DVD/VCR to channel 3  
or 4 the same channel as RF output channel of the DVD/VCR.  
Then, select the channel you want to record with the cable box  
or satellite box.  
TO CHECK, CORRECT, OR CANCEL AN  
AUTOMATIC TIMER PROGRAM  
Leave the cable box or satellite box on for timer recording.  
ONE TIME PROGRAM  
1
Press T-SET.  
7) Set the tape speed  
PROGRAM NUMBER  
DATE 05 /12 MON  
START TIME 07: 30 PM  
END TIME 08: 30 PM  
CHANNEL 16  
4
¡If the DVD output mode is selected, you have to  
switch it to the VCR mode by pressing the VCR on  
the remote control or the OUTPUT on the VCR.  
Press K or L repeatedly for the  
desired tape speed. Then, press B.  
REC SPEED SP  
SP  
SLP  
2
3
Select main menu by pressing MENU.  
5
6
To set another program, repeat step [4]. To  
exit, press CLEAR/C.RESET.  
Select "TIMER PROGRAMMING" by press-  
ing K or L. Then, press B.  
Press T-SET to set the timer.  
4
Select the program number you want to  
check by pressing K or L.  
¡The TIMER REC light on the DVD/VCR COMBI-  
NATION UNIT comes on. TIMER RECORDING  
WILL NOT BE ACTIVATED UNLESS YOU  
PRESS T-SET.  
¡The details of the selected program appears on the  
TV screen.  
¡Go to the digit you want to change by pressing B or  
s. Then, enter correct numbers by pressing o or p.  
¡You may cancel the entire program by pressing  
while the program number flashes.  
HINTS FOR TIMER  
RECORDING  
s
VCR  
5
6
Press CLEAR/C.RESET to exit.  
Press T-SET to return to timer stand-by mode  
EN  
¡If there is a power failure or the VCR is unplugged  
for more than 30 seconds, the clock setting and all  
timer settings will be lost.  
.
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
SPECIAL FEATURES  
TO MONITOR THE RECORDING  
COPYING A VIDEO TAPE  
1
Turn on the TV and set the TV to channel 3.  
VCR  
¡If noise appears, change the RF output channel of  
the VCR to channel 4 by pressing PLAY for 3 sec-  
onds during playback. Then select the same channel  
(CH4) on your TV. (See RF OUTPUT  
CHANNELon page 13 for the detail).  
You can make copies of video tapes made by friends or  
relatives for your enjoyment.  
You can not copy a DVD to a videotape.  
Warning:  
Unauthorized recordings of copyrighted video tapes  
may be an infringement of copyright laws.  
Connect the recording VCR (this unit), the playing  
VCR (another source) and your TV using the follow-  
ing diagram.  
2
Press VCR/TV on the recording VCR.  
¡You can use the AUDIO/VIDEO input jacks on the  
front panel of the DVD/VCR instead of using the  
jacks on the back.  
[Recording VCR]  
(this unit)  
DVD  
DVD/VCR  
VCR  
AUDIO OUT  
S-VIDEO COMPONENT AUDIO  
DIGITAL  
AUDIO OUT  
OUT  
VIDEO OUT  
OUT  
ANT-IN  
L
Y
ADIO IN  
Cb  
Cr  
L
R
COAXIAL  
ANT-OUT  
VIDEO OUT  
VIDEO IN  
R
RF cable  
(supplied)  
Audio/Video cables  
(not supplied)  
[TV set]  
(Use for monitoring)  
OUT IN  
AUDIO  
VIDEO  
[Playing VCR]  
(another source)  
ANT in  
1
Insert a pre-recorded tape into the playing VCR.  
2
3
4
Insert a tape with a safety tab into the  
recording VCR.  
Press SPEED on the recording VCR to select the  
desired recording speed (SP/SLP)  
.
Select the L1or L2position on the  
recording VCR.  
¡
When you use the A/V input jacks on the back of the  
DVD/VCR, select "L1" position by pressing [0], [0], [1]  
on the remote control or the CHANNEL buttons (o/p).  
¡
When you use the A/V input jacks on the front of the  
DVD/VCR, select "L2" position by pressing [0], [0], [2]  
on the remote control or the CHANNEL buttons (o/p).  
5
6
Press REC/OTR on the recording VCR.  
Begin playback of the tape in the playing  
VCR.  
¡For best results during dubbing, use the VCRs front  
panel controls whenever possible. The remote con-  
trol might affect the playing VCRs operation.  
¡Always use video-quality shielded cables with  
RCA-type connectors. Standard audio cables are not  
recommended.  
¡You can use a video disc player, satellite receiver, or  
other audio/video component with A/V outputs in  
place of the playing VCR.  
EN  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
AUTO REWIND  
REAL TIME TAPE COUNTER  
When a tape reaches the end during recording, play-  
back, or fast-forward, the tape will automatically  
rewind to the beginning. After rewinding finishes, the  
VCR will eject the tape and switch itself off.  
¡The VCR will not rewind the tape automatically dur-  
ing timer recording or One Touch Recording.  
¡This shows the elapsed recording or playback time  
in hours, minutes, and seconds. (The displayed time  
will not change during blank portions of the tape.)  
¡The indication will appear when the tape is rewound  
further than 0:00:00on the tape counter.  
PLAYING A DISC  
Notes  
BASIC PLAYBACK  
¡A prohibited iconmay appear at the top-right on  
the TV screen during operation, warning that a pro-  
hibited operation has been encountered by the DVD  
or the disc.  
¡With DVDs that use titles for playback program sig-  
nals, playback may start from the second title, or it  
may skip these titles.  
¡During the playback of a two layered disc, pictures  
may stop for a moment. This happens when the 1st  
layer switches to the 2nd layer. This is not a mal-  
function.  
DVD-V  
CD  
Getting started  
¡Turn on the power of the TV, amplifier and any other  
components which are connected to the DVD.  
¡Make sure the TV and audio receiver (commercially  
available) are set to the correct channel.  
¡Select DVD mode by pressing DVD on the remote  
control or output on the front panel.  
1
2
Press POWER.  
Press OPEN/CLOSE to open disc loading  
tray.  
GENERAL FEATURES  
DVD may contain menus to navigate the disc and  
access special features. Press the appropriate Number  
buttons or use Arrow (L/K/s/B) to highlight your  
selection in the DVD main menu and press ENTER to  
confirm.  
3
Place the chosen disc in the tray, with the  
label facing up.  
Note  
¡Unless stated, all operations described are based on  
remote control use. Some operations can be carried  
out using the menu bar on the TV screen.  
PAUSE  
4
Press PLAY.  
¡The tray will close automatically, and playback will  
then start from the first chapter or track of the disc.  
If the playback does not start automatically, press  
PLAY.  
DVD-V  
CD  
1
During playback, press PAUSE.  
¡Playback will pause and sound will be muted.  
¡When you playback the DVD which a title menu is  
recorded, it may appear on the screen. In this case,  
refer to TITLE MENUon page 23.  
2
To continue playback, press PLAY.  
5
Press STOP to stop playback.  
EN  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
DISC MENU  
RESUME  
DVD-V  
DVD-V  
CD  
1
Press MENU.  
¡The DVD main menu will appear.  
1
During playback, press STOP.  
¡Resume message will appear on the TV screen.  
2
Press PLAY, playback will resume from the  
point at which playback was stopped.  
2
3
If the feature is not available,  
may appear on the TV screen.  
symbol  
¡To cancel resume, press STOP twice.  
If disc menu is available on the disc, audio  
language, subtitle options, chapters for the  
title and other options will appear for selec-  
tion.  
FAST FORWARD/REVERSE  
SEARCH  
DVD-V  
CD  
MP3  
4
Press Arrow (L/K/s/B) to select an item,  
and ENTER to confirm selection.  
1
During playback, press g or h repeat-  
edly to select the required forward or  
reverse speed: x2, x8, x50, x100.  
TITLE MENU  
¡For audio CDs, the speed is fixed at ×16.  
¡For MP3, the speed is fixed at ×8.  
DVD-V  
2
To return to normal playback, press PLAY.  
1
Press TITLE.  
¡The title menu will appear.  
SLOW FORWARD /  
SLOW REVERSE  
2
3
If the feature is not available,  
may appear on the TV screen.  
symbol  
DVD-V  
Press Arrow (L/K/s/B) to select an item,  
and ENTER to confirm selection.  
1
2
3
During playback, press PAUSE.  
Press g or h .  
CALLING UP A MENU SCREEN  
DURING PLAYBACK  
Press g or h repeatedly to select the  
required speed: 1/16, 1/8, 1/2 of the normal  
playback.  
For DVD-Vs  
¡Press MENU to call up the DVD menu.  
¡Press TITLE to call up the title menu.  
Note  
4
To return to normal playback, press PLAY.  
¡Contents of menus and corresponding menu opera-  
tions may vary between discs. Refer to the manual  
accompanying the disc for details.  
STEP BY STEP PLAYBACK  
DVD-V  
1
During playback, press PAUSE.  
¡Playback will pause and sound will be muted.  
2
3
The disc goes forward by one frame each  
time PAUSE is pressed.  
To exit step by step playback, press PLAY.  
EN  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
Using SKIP  
H
G
ZOOM  
During playback, press SKIP G to move the next  
track. Press it repeatedly to skip subsequent tracks.  
Press SKIP H to go back to beginning of the current  
track. Press it repeatedly to go to the previous tracks.  
¡Track number will appear briefly on the DVD/VCR  
COMBINATION UNIT display panel.  
DVD-V  
The Zoom function allows you to enlarge the video  
image and to pan through the enlarged image.  
¡If SKIP is pressed while the playback is paused, the  
playback will be paused again after skipping to the  
next track.  
1
Press ZOOM during playback.  
¡Playback will continue.  
Note  
¡SKIP  
stopped.  
2
3
Press ZOOM repeatedly to select the  
required zoom factor: x2, x4 or OFF.  
H
G are not available when playback is  
Use the Arrow (K/L/s / B) to move the  
zoomed picture across the screen.  
TITLE / CHAPTER SEARCH  
4
Notes  
To exit zoom mode, press ZOOM to OFF.  
DVD-V  
¡Zooming function does not work while disc menu is  
shown.  
¡x4 zoom is not available on some discs.  
1
Press SEARCH MODE once for the Chapter  
search, twice for the Title search during  
playback.  
/2  
TRACK  
CD  
2
Enter the desired chapter/title number using  
the Number buttons.  
There are three ways to begin playback on an Audio  
CD at a specific Track.  
¡Playback will start at the selected Chapter or Title.  
¡Press CLEAR to erase the incorrect input.  
¡For single digits press 0 first.  
Using the Number buttons  
1
Press the Number buttons to enter the  
desired Track number.  
TIME SEARCH  
¡Playback will start at the selected track.  
¡For single digit tracks (1-9), press a single number  
(eg. track 3, press 3).  
DVD-V  
CD  
¡To play track 26, press +10, 2, 6 on the Number but-  
tons.  
Using SEARCH MODE  
1
2
During playback, press SEARCH MODE  
three times (CD: twice) to display the Time  
Search on the TV screen.  
1
Press SEARCH MODE.  
¡The track search display appears.  
Within 30 seconds, enter a desired disc  
time using the Number buttons.  
2
Within 30 seconds, select a desired track  
number using the Number buttons.  
¡Playback will start at the specified time.  
¡For single digits press 0 first.  
¡Playback will start at the selected track.  
¡Press CLEAR to erase the incorrect input.  
EN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
Notes  
REPEAT  
REPEAT is available only during playback.  
REPEAT TITLE / CHAPTER  
¡The repeat A-B section can only be set within the  
current title (for DVDs), or current track (for audio  
CDs).  
¡Repeat A-B is not available with some scenes in  
DVD.  
DVD-V  
¡To cancel the A point which was set, press CLEAR.  
¡Repeat A-B playback does not function during title,  
chapter, track or all repeat playback.  
To activate the repeat function, press REPEAT  
during playback.  
¡The repeat mode changes as described below every  
time you press the button.  
PROGRAM  
CHAPTER  
(current chapter repeat) (current title repeat)  
TITLE  
OFF  
(repeat off)  
CD  
You may determine the order in which tracks will play.  
Notes  
1
In stop mode, press MODE.  
¡The PROGRAM screen will appear.  
¡Repeat Title/Chapter is not available with some  
scenes.  
¡The REPEAT setting will be cleared when moving  
to other title or chapter.  
2
Press L or M to select a track, then press  
ENTER.  
REPEAT TRACK  
¡Press CLEAR to erase the  
most recently entered pro-  
gram.  
CD  
CD [AUDIO]  
TOTAL 0:03:30  
To activate the repeat function, press REPEAT  
during playback.  
¡The repeat mode changes as described below every  
time you press the button.  
3
Notes  
Press PLAY to play the programmed tracks.  
TRACK  
(current track repeat)  
ALL  
OFF  
(repeat off)  
(entire disc repeat)  
¡While the program is being played back, the STOP  
works as follows.  
¡Press STOP once and then PLAY again, playback  
will restart from the point where STOP was pressed.  
(Program continued)  
¡Press STOP twice and then PLAY again, playback  
will restart from the track in the usual way. (Program  
cleared)  
Notes  
¡Track Repeat setting will be cleared when moving to  
other track.  
¡Repeat playback does not function during repeat A-  
B playback.  
MP3  
¡Up to 99 programs can be entered.  
¡If you like to repeat the current track in the program,  
TRACK  
GROUP  
ALL  
OFF  
(repeat off)  
(current track  
(current group  
(entire disc  
press REPEAT repeatedly until  
TRACK appears  
repeat)  
repeat)  
repeat)  
during playback. If you like to repeat the entire pro-  
gram press REPEAT repeatedly until  
appears during playback.  
ALL  
REPEAT A-B  
DVD-V CD  
1
2
Press REPEAT A-B at your chosen starting  
point.  
A- appears briefly on the TV screen.  
¡
¡
Press REPEAT A-B again at your chosen  
end point.  
A-B appears briefly on the TV screen, and the  
repeat sequence begins.  
3
To exit the sequence, press REPEAT A-B.  
EN  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
Notes  
RANDOM PLAYBACK  
¡Folders are known as Groups; files are known as  
Tracks.  
¡MP3 files are accompanied by  
CD  
3
icon.  
¡Maximum of 255 folders can be recognized.  
¡Maximum of 256 files can be recognized.  
¡Up to 8 hierarchies can be created.  
This shuffles the playing order of tracks instead of  
playback in the sequence.  
This player recommends the use of files recorded at  
the below specifications:  
¡Sampling frequency: 44.1kHz or 48kHz  
¡Constant bit rate: 112kbps ~ 320kbps.  
1
In stop mode, press MODE twice.  
¡RANDOM screen  
RANDOM  
appears.  
CD [AUDIO]  
TOTAL 0:45:55  
RANDOM PROGRAM  
--no indication--  
INFORMATION  
ON-SCREEN  
PLAY  
MP3  
You can check the MP3 files during playback.  
2
Press PLAY to start random playback.  
Note  
1
Press DISPLAY.  
¡The name of the file currently in play will be dis-  
¡If you like to repeat the current track in the random  
selection, press REPEAT repeatedly until  
TRACK appears during playback. If you like to  
repeat the entire random selection press REPEAT  
played.  
2
Press DISPLAY again to show the track  
number, the repeat status, and the playback  
status at the top of the screen.  
repeatedly until  
ALL appears during playback.  
MP3 PLAYBACK  
¡
will be displayed when repeat play has been  
selected.  
MP3  
T - indicates Track repeat  
When a CD with MP3 files is inserted in the  
DVD/VCR, the MP3 menu will appear on the TV  
screen, and number of tracks is displayed on the front  
panel.  
G - indicates Group (folder) repeat  
A - indicates Disc repeat  
3
1
Press DISPLAY again to exit.  
1
In stop mode, press Arrow (K/L) to select  
the desired group track.  
TRACK SELECTION  
¡If a group is selected,  
press or ENTER to go  
B
MP3  
on to the track selection  
screen. Press Arrow (K/L)  
to choose a track, then  
Press SEARCH MODE during playback.  
¡The FILE LIST will appear.  
press  
¡If a track is selected, press  
or ENTER to start playing tracks. Starting from  
B
or ENTER.  
2
Select a desired track using Arrow  
(K/L/s/B).  
¡Press B when you want to go to the next hierarchy.  
¡Press s when you want to go back to the previous  
hierarchy.  
B
the one youve just chosen the subsequent tracks  
will be played.  
¡Choose FIRST PLAY to start playback from the  
beginning of the listed tracks.  
¡Press TITLE to return to the first item.  
3
Press PLAY to start playing.  
Notes  
2
Press STOP to stop playback.  
¡Press SEARCH MODE to exit.  
¡Some selections may take a while to be recognized.  
EN  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
RANDOM PLAYBACK  
SUBTITLE LANGUAGE  
MP3  
DVD-V  
The DVD allows you to select a language for subtitles  
during DVD disc (if available) playback.  
1
2
Press MODE twice while playback is  
stopped.  
1
2
Press SUBTITLE during playback.  
Press PLAY to play the tracks in random  
order.  
Press SUBTITLE repeatedly to select your  
desired subtitle language.  
PROGRAM  
¡The subtitle language will be displayed on the dis-  
play bar at the top of the screen.  
MP3  
3
To turn off subtitles, press SUBTITLE  
repeatedly until OFF appears.  
This feature allows you to program a mp3 disc to play  
in a desired sequence.  
Notes  
¡Pressing AUDIO may not work on some DVDs with  
multiple audio languages (e.g. DVDs which allow  
audio language setting on the disc menu).  
¡Some discs allow audio language setting/subtitle  
language setting on the disc menu. (Operation varies  
between discs, so refer to the manual accompanying  
the disc.)  
1
Press MODE during playback is stopped.  
¡The PROGRAM screen will appear.  
2
Press Arrow (K/L) to select a track, then  
press ENTER, to save it in a program.  
¡Press CLEAR to erase the incorrect input.  
¡If the desired language is not shown after pressing  
SUBTITLE several times, the disc does not have  
subtitles in that language.  
3
Press PLAY to start programmed playback.  
¡If you choose a Language that has a 3 letter language  
code, the code will be displayed every time you  
change the Subtitle language setting. If you choose  
any other languages, ---will be displayed instead.  
(Refer to page 31.)  
AUDIO LANGUAGE  
DVD-V  
The DVD/VCR allows you to select a language during  
DVD disc (if multi language available) playback.  
CAMERA ANGLE  
DVD-V  
1
2
Press AUDIO during playback.  
Some DVD discs contain scenes which have been shot  
simultaneously from various angles. You can change  
Press AUDIO repeatedly to select your  
desired language.  
the camera angle when the (  
screen.  
) icon appears on the  
STEREO SOUND MODE  
1
Press ANGLE during playback.  
CD  
¡The selected angle will be displayed on the display  
bar at the top of the screen.  
1
Press AUDIO repeatedly during playback to  
select between STEREO, L-CH or R-CH.  
2
Press ANGLE repeatedly to select your  
desired angle.  
¡STEREO - both right and left channels are active  
(stereo)  
L-CH - only left channel is active  
R-CH - only right channel is active  
Note  
¡If the Virtual Surround setting is ON, the sound  
mode will be fixed to STEREO, and can not be  
changed.  
EN  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
CHANGING THE ON-SCREEN  
DISPLAY  
PARENTAL CONTROL  
DVD-V  
DVD-V  
CD  
Parental Control limits the disc viewing that exceed  
your settings. (with a password or playback will stop.)  
This feature allows you to prevent discs with alterna-  
tive scenes from being played by your children.  
You can check the information about the current disc  
by pressing DISPLAY on the remote control.  
For DVD-Vs  
PARENTAL LEVEL  
1
Press DISPLAY during playback to show  
current Chapter.  
Parental Level allows you to set the rating level of  
your DVD discs. Playback will stop if the discs rat-  
ings exceed the level you set.  
¡The elapsed and remaining  
playing time of the current  
chapter will be displayed.  
9/49  
0:00:00 -0:00:00  
1
2
Press SETUP in STOP mode.  
Press B to select CUSTOM, then press  
ENTER.  
2
Press DISPLAY again to show current Title.  
¡The elapsed and remaining playing time of the cur-  
rent title will be displayed.  
3
Press Arrow (s/B) to select PARENTAL,  
then press ENTER.  
3
Press DISPLAY third time.  
¡The BIT RATE and the current repeat setting will be  
displayed.  
PARENTAL  
PARENTAL LEVEL ALL  
¡If you are playing a dual layered disc, the layer num-  
ber will also be displayed (L0: Layer 0 is playing.  
L1: Layer 1 is playing).  
4
5
6
Enter your four-digit password then press  
ENTER.  
4
Press DISPLAY the fourth time to remove  
the display.  
Press Arrow (K/L) to select PARENTAL  
LEVEL, then press ENTER.  
For audio CDs  
1
Press DISPLAY during playback, the current  
Track will be displayed on the TV screen.  
Press Arrow (K/L) to select the desired  
level.  
¡The elapsed and remaining playing time of the cur-  
rent track will be displayed.  
7
Press SETUP to exit  
2
Press DISPLAY again to show current Total  
Track.  
Notes  
¡When doing this for the first time, enter any 4 digits.  
(except for 4737) That number will be used as the  
password. (in the event you forget the password, see  
below.)  
¡The elapsed and remaining playing time of the cur-  
rent total track will be displayed.  
¡To change the password, press Arrow (K/L) to  
select CHANGE at step 5, then press ENTER. Enter  
the four-digit pass-word, then press ENTER.  
¡With some DVDs, it may be difficult to find if they  
are compatible with parental lock. Be sure to check  
if the parental lock function operates in the way that  
you have set.  
3
Press DISPLAY third time to remove the dis-  
play.  
¡Record the password in case you forget it.  
IF YOU FORGET THE PASSWORD  
1
Press 4, 7, 3, 7 at step 4. Then enter your  
new password.  
¡Password will be cleared and parental level will be  
set to ALL.  
2
Proceed the above Steps 5-7 again.  
EN  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
CONTROL LEVELS  
2
3
Press Arrow (s /B) to select 1, 2, 3, 4, 5, 6,  
7, 8, 9, or 10 and ensure that - : - - : - -”  
appears in the display.  
¡ALL  
All parental lock is cancelled.  
¡Level 8  
DVD software of any grade (adult/general/children)  
can be played back.  
When reaches the desired point, press  
ENTER.  
¡Levels 7 to 2  
¡The Title or Track and elapsed playing time will  
appear in the TV screen.  
Only DVD software intended for general use and  
children can be played back.  
¡
Level 1  
4
To return to the Marker later, press SEARCH  
MODE four times (CD: three times) during  
playback and Arrow (s /B) to choose the  
desired marker, then press ENTER.  
Only DVD software intended for children can be  
played back, with those intended for adult and  
general use prohibited.  
Notes  
¡Opening the disc tray or turning off the power or  
select AC at step 2 and press ENTER will erase all  
Markers.  
MARKER SETUP SCREEN  
DVD-V  
CD  
¡To clear a marker, using Arrow (s / B), position the  
cursor on to the marker number to be cleared and  
press CLEAR.  
¡You can mark up to 10 points.  
Use markers to memorise your favorite places on a  
disc.  
1
Press SEARCH MODE four times (CD: three  
times) during playback.  
5
Press SEARCH MODE or RETURN to exit.  
¡The display screen and Markers will appear on the  
TV screen.  
DVD SETUP  
DOLBY DIGITAL:  
Set to On when the unit is connected to a Dolby Digital  
QUICK  
AUDIO SETTING  
Choose the appropriate Audio settings for your equip-  
ment as it only affect during the playback of DVD  
discs.  
Receiver.  
(ON: Outputs a Dolby Digital Signal)  
(OFF: Convert the Dolby Digital to PCM (2channel))  
¡The default setting is ON.  
DOWN SAMPLING:  
¡Set to ON when outputting in 48 kHz.  
¡The default setting is ON.  
When playing disc with copyright Protection  
¡If you select OFF, copyright protection will be acti-  
vated and sound will be down sampled at 48kHz.  
1
2
Press SETUP in STOP mode.  
Press B to select CUSTOM, then press  
ENTER.  
¡CUSTOM mode will appear.  
3
Press Arrow (s / B) to select AUDIO, then  
press ENTER to confirm.  
5
Press SETUP to exit.  
AUDIO  
DRC  
OFF  
ON  
DOLBY DIGITAL  
DOWN SAMPLING ON  
4
Press Arrow (K/L) to select the below  
items, then press ENTER.  
DRC (Dynamic Range Control):  
¡To compress the range of soft to loud sounds.  
¡The default setting is OFF.  
EN  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
BLACK LEVEL SETTING  
DISPLAY SETTING  
DVD-V  
DVD-V  
Adjust the Black Level Settings to make the black You can change certain aspects of the DVD display  
parts of the picture as bright as you preferred. screens and on-screen messages.  
1
Press MODE during playback.  
1
2
Press SETUP in STOP mode.  
ON  
Press B to select CUSTOM, then press  
ENTER.  
¡CUSTOM mode will appear.  
2
Press ENTER to switch ON/OFF.  
ON: Makes the dark parts brighter.  
3
Press Arrow (s /B) to select DISPLAY, then  
press ENTER to confirm.  
OFF: Shows the original picture as recorded.  
3
Press MODE twice or RETURN to exit.  
DISPLAY  
TV ASPECT  
4:3 LETTER BOX  
ON  
ANGLE ICON  
AUTO POWER OFF ON  
VIRTUAL SURROUND  
DVD-V  
CD  
MP3  
4
Press Arrow (K/L) to select the below  
items, then press ENTER.  
You can enjoy stereophonic visual space on your exist-  
ing stereo system.  
TV ASPECT:  
¡Press Arrow (K/L) for an item selection, then press  
QUICK  
ENTER.  
1
Press MODE twice (CD/MP3: once) during  
¡Select 4:3 LETTER BOX for a black bars appears  
on top and bottom of the screen.  
¡Select 4:3 PAN & SCAN for a full height picture  
with both sides trimmed.  
playback.  
OFF  
¡Select 16:9 WIDE if a wide-screen TV is connected  
to the DVD/VCR.  
¡The default setting is 4:3 LETTER BOX.  
ANGLE ICON:  
¡Press ENTER repeatedly to turn Angle icon ON or  
OFF.  
¡The default setting is ON.  
AUTO POWER OFF:  
¡Press ENTER repeatedly to turn Auto Power off ON  
or OFF.  
2
3
Press ENTER to set the mode; 1 (Natural  
effect), 2 (Emphasized effect), or OFF.  
Press MODE or RETURN to exit.  
Note (for CD play only)  
¡Virtual Surround will not be effective if the sound  
mode is set to something other than STEREO.  
¡If noise is heard select lower level, or OFF.  
¡The default setting is ON and it will turn the  
DVD/VCR to off automatically after 35 minutes of  
no use.  
5
Notes  
Press SETUP to exit.  
¡Be sure to press SETUP, or the setting will not work.  
EN  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
AUDIO:  
¡Sets the audio language.  
SUBTITLE:  
¡Sets the subtitle language.  
DISC MENU:  
¡Sets the language for DVD menu.  
LANGUAGE SETTING  
DVD-V  
Language options are not available with some discs.  
PLAYER MENU:  
¡Sets the language for the On-screen display.  
QUICK  
1
2
Press SETUP in STOP mode.  
Press B to select CUSTOM, then press  
ENTER.  
5
Press Arrow (K/L) to select a setting, then  
press ENTER.  
¡CUSTOM mode will appear.  
¡If OTHER is selected on the AUDIO, SUBTITLE or  
DISC MENU screen, press four-digit number to  
enter the code for the desired language. (Refer to the  
language code list below.)  
3
Press Arrow (s / B) to select LANGUAGE,  
then press ENTER to confirm.  
¡Only the languages supported by the disc can be  
selected.  
LANGUAGE  
AUDIO  
ORIGINAL  
OFF  
ENGLISH  
ENGLISH  
6
Note  
Press SETUP to exit.  
SUBTITLE  
DISC MENU  
PLAYER MENU  
¡Language Setting for Audio and Subtitle is not avail  
able with some discs. Then use the AUDIO and the  
SUBTITLE button. Details are on page 27.  
4
Press Arrow (K/L) to select the next items,  
then press ENTER.  
¡If you want to return to LANGUAGE SETTING  
MENU, press Arrow(s ).  
Language  
Code  
Language  
Frisian  
Code  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
Language  
Malay  
Code  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
Language  
Somali  
Spanish [SPA]  
Sundanese  
Swahili  
Swedish [SWE]  
T
Code  
6561  
5165  
6567  
6569  
6568  
A-B  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali;Bangla  
Bhutani  
Bihari  
Bislama  
Breton  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
Galician  
Malayalam  
Maltese  
Maori  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Hebrew  
Hindi  
Hungarian [HUN]  
I-K  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
Irish [IRI]  
Italian [ITA]  
Japanese [JPN]  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Marathi  
Moldavian  
Mongolian  
Nauru  
Tagalog  
Tajik  
Tamil  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Nepali  
Norwegian [NOR]  
O-R  
Occitan  
Tatar  
Telugu  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
6467  
Thai  
Oriya  
Oromo(Afan)  
Panjabi  
Pashto;Pushto  
Persian  
Polish  
Portuguese [POR]  
Quechua  
Rhaeto-Romance  
Romanian [RUM]  
Russian [RUS]  
S
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
Setswana  
Shona  
Sindhi  
Tibetan  
Tigrinya  
Tonga  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
Tsonga  
Turkish [TUR]  
Turkmen  
Twi  
Bulgarian  
Burmese  
Byelorussian  
U-Z  
Ukrainian  
Urdu  
Uzbek  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
C-E  
Cambodian  
Catalan  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Chinese [CHI]  
Corsican  
Croatian  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
6565  
6557  
6558  
Czech  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
Korean [KOR]  
Kurdish  
L-N  
Laothian  
Latin  
Latvian;Lettish  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
5861  
5847  
5868  
5860  
5866  
5957  
5953  
F-H  
Faroese  
Fiji  
Finnish [FIN]  
French [FRE]  
5261  
5256  
5255  
5264  
Singhalese  
Siswat  
Slovak  
Slovenian  
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change  
the Audio or Subtitle language setting on page 27. If you choose any other languages, ---will be displayed  
instead. (3 letter language code is written in bracket.)  
EN  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
TROUBLESHOOTING GUIDE  
If the DVD/VCR COMBINATION UNIT does not perform properly when operated as instructed in this  
Owner's Manual, check the player consulting the following checklist.  
PROBLEM  
No power.  
CORRECTIVE ACTION  
D
V
D
Make sure the power plug is connected to an AC outlet.  
Make sure the power is turned on.  
The player does not respond to. Check if the power plug is connected to an AC outlet.  
the remote control.  
Check the batteries in the remote control.  
Aim the remote control directly at the remote sensor. If necessary, remove all the  
obstacles between the sensor and the remote.  
You have to be within 23 feet of the player.  
Check if the correct mode is selected. If not switch the mode by pressing DVD or  
VCR ,whichever you need, on the remote control.  
V
C
R
Check if a cassette tape is in the VCR.  
Timer recording is impossible. Make sure the timer recording is set correctly.  
Make sure the power is off.  
V
C
R
Make sure the VCR clock is set correctly.  
Cannot go into Record mode. Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.  
Put he player in VCR mode. Press VCR on the remote control so that the green VCR  
OUTPUT light is lit.  
(
)
Playback picture is partially noisy Adjust tracking control for a better picture by pressing CHANNEL  
on the  
DVD/VCR COMBINATION UNIT.  
Cannot view a tape but the  
Head cleaning may be necessary. Refer to AUTO HEAD CLEANING.  
Make sure the VCR is not in the Menu mode.  
.
audio is OK  
No, or poor, playback picture.  
Change the RF output channel to CH4. Then select the same channel on the TV.  
Fine tune your TV.  
TV programs cannot be seen  
normally.  
Recheck the ANT. IN and ANT. OUT connections. See page 13.  
Press VCR/TV.  
Press VCR on the remote control to put it in the VCR mode. Check if the green VCR  
OUTPUT light is lit. Then, set it to the TV position by pressing VCR/TV.  
Video or color fades in and out  
when making a copy of a video tape.  
You cannot copy a copyrighted video tape. You are experiencing copy guard protection.  
Cannot remove the tape.  
Check if the player is in the VCR mode. If not, press VCR on the remote control to switch  
the mode.  
No picture.  
Connect the video cables firmly.  
D
V
D
Insert a correct video disc that plays on this player.  
Press DVD on the remote control. Check if the DVD OUTPUT Light is lit. Then try other  
DVD feature.  
Insert the disc.  
Clean the disc.  
.
Disc cannot be played  
Place the disc correctly, with the label side up.  
Cancel the parental lock or change the control level.  
Connect the audio cables firmly.  
.
No sound  
Turn the power of the audio component on.  
Correct the audio output settings.  
Correct the input settings on the audio component.  
This player does not support DTS audio. This is not a malfunction.  
Connect the player directly to the TV.  
.
No DTS audio is output  
.
Distorted picture  
There are some cases where pictures may be slightly distorted, which are not a sign of a mal-  
function.  
Although pictures may stop for a moment, this is not a malfunction.  
Audio or subtitle language  
does not match the set up  
The camera angle cannot be  
changed  
The selected language is not available for audio or subtitles on the DVD.  
This is not a malfunction  
The DVD does not contain sequences recorded from different camera angles.  
This is not a malfunction  
Audio or subtitle language  
cannot be changed  
The DVD does not contain audio source or subtitles in the selected language.  
This is not a malfunction.  
Prohibited iconappears on the That operation is prohibited by the player or the disc.  
screen, prohibiting an operation This is not a malfunction.  
Notes  
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this  
Owners Manual for details on correct operations.  
¡Playback from a desired track and random playback are not available during program playback.  
EN  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
MAINTENANCE  
AUTO HEAD CLEANING  
SERVICING  
¡Should your DVD/VCR COMBINATION UNIT ¡Automatically cleans video heads as you insert or  
become inoperative, do not try to correct the prob- remove a cassette, so you can see a clear picture.  
lem by yourself. There are no user-serviceable parts ¡Playback picture may become blurred or interrupted  
inside. Turn off, unplug the power cord, and please  
call our help line at 1-800-968-3429 to locate an  
Authorized Service Center.  
while the TV program reception is clear. Dirt accu-  
mulated on the video heads after long periods of use,  
or the usage of rental or worn tapes can cause this  
problem. If a streaky or snowy picture appears dur-  
ing playback, the video heads in your DVD/VCR  
COMBINATION UNIT may need to be cleaned.  
CLEANING THE CABINET  
¡Use a soft cloth slightly moistened with a mild deter-  
gent solution. Do not use a solution containing alco-  
hol, spirits, ammonia or abrasive.  
1. Please visit your local Audio/Video store and pur-  
chase a good quality VHS Video Head Cleaner.  
CLEANING DISCS  
2. If a Video Head Cleaner does not solve the prob-  
lem, please call our help line at 1-800-242-7158 to  
locate an Authorized Service Center.  
¡When a disc becomes dirty, clean it with a cleaning  
cloth. Wipe the disc from the center out. Do not wipe  
in a circular motion.  
NOTES:  
¡Do not use solvents such as benzine, thinner, com-  
mercially available cleaners, detergent, abrasive  
cleaning agents or antistatic spray intended for ana-  
logue records.  
¡Remember to read the instructions included with the  
video head cleaner before use.  
¡ Clean video heads only when problems occur.  
CLEANING THE DISC LENS  
¡If the player still does not perform properly when it  
is operated while referring to the relevant sections  
and to TROUBLESHOOTING GUIDEin this  
Owners Manual, the laser optical pickup unit may  
be dirty. Consult your dealer or an Authorized  
Service Center for inspection and cleaning of the  
laser optical pickup unit.  
DISC HANDLING  
¡Use discs which have the following logos on them.  
(Optical audio digital discs.)  
Recordable  
ReWritable  
¡Handle the discs so that fingerprints and dust do not  
adhere to the surfaces of the discs.  
¡Always store the disc in its protective case when it is  
not used.  
Make your contribution to the environment!!!  
Used up batteries do not belong in the dust bin.  
You can dispose of them at a collection point for used up batteries or special waste.  
Contact your council for details.  
EN  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
SPECIFICATIONS  
Product type:  
Discs:  
DVD player with Video Cassette Recorder  
DVD video  
Audio CD  
Video Cassette tape  
Converter output:  
Power source:  
VHF Channel 3 or 4.  
120 V AC +/- 10%, 60 Hz +/- 0.5%  
24 W (standby: 7.0 W)  
5°C to 40°C  
Power consumption:  
Operating temperature:  
Dimensions:  
W 17-1/8(435 mm)  
H 3-15/16(99 mm)  
D 8-9/16(218 mm)  
8.16 lbs (3.7 kg)  
Weight:  
¡Designs and specifications are subject to change without notice.  
¡If there is a discrepancy between languages, the default language will be English.  
EN  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
CONTROLES DEL FUNCIONAMIENTO Y SUS FUNCIONES  
1
2
3
4
5
6 7  
8
PANEL DELANTERO  
POWER  
OPEN/CLOSE  
CHANNEL  
STOP/EJECT  
PLAY  
DVD  
VCR  
VIDEO  
AUDIO  
OUTPUT  
REC  
PLAY DISC IN  
DVD  
VCR TIMER/REC  
STOP  
SKIP/REV  
PLAY  
FWD/SKIP  
REW  
F.FWD  
24  
22 20  
23 21  
19  
18 16 14  
17 15  
12  
13  
10  
PANEL REMOTO  
25  
11  
9
11. Toma AUDIO IN  
Conecte aquí cable de audio procedentes de las toma  
de salida de audio de un camcorder, otro VCR o una  
fuente de audio.  
55  
26  
POWER SPEED AUDIO  
27  
1
4
7
2
5
8
0
3
54  
52  
12. Toma VIDEO IN  
SKIP/CH.  
6
Conecte aquí un cable de videó procedente de la toma  
de salida de videó de un camcorder, otro VCR o una  
fuente de videó (reproductor de discos láser,  
camcorder, etc.).  
28  
VCR/TV  
SLOW  
9
53  
+
10  
DISPLAY DVD  
VCR  
PAUSE  
51  
49  
13. Botón F.FWD (VCR)  
29  
31  
33  
50  
48  
Presione para avanzar rápidamente la cinta o ver la  
imagen rápidamente en avance durante reproducción.  
(Búsqueda en Avance).  
30  
32  
PLAY  
STOP  
14. Botón REW (VCR)  
RECORD  
MENU  
Presione para rebobinar la cinta o para ver la imagen  
rápidamente en inversión durante el modo de  
reproducción.(Búsqueda en Rebobinado).  
15. Botón REC/OTR  
47  
45  
34  
36  
38  
ENTER  
46  
35  
37  
SETUP  
TITLE  
RETURN  
SEARCH  
MODE  
CLEAR/  
MODE ZOOM  
C.RESET  
Presione una vez para iniciar una grabación. Presione  
repetidamente para iniciar un Grabación de Un-Toque.  
16. Luz REC  
Se enciende durante la grabación.  
17. Luz TIMER REC  
Esta luz brilla cuando el DVD/VCR está en el modo  
espera o apagada para una grabación con temporizador o  
durante una grabación de Un-Toque, Parpadea si se  
presiona Botón T-SET para una grabación con  
temporizador, pero no hay cinta en el DVD/VCR.  
Parpadea cuando todas las grabaciones con temporizador  
o grabaciones de Un-Toque han terminado.  
18. Botón OUTPUT  
44  
42  
43  
41  
SUBTITLE ANGLE REPEAT  
A
B
39  
T-SET  
40  
1. Bandeja de carga del disco  
2. Botón OPEN/CLOSE  
Presione para insertar discos en o removerlos de la  
bandeja de disco.  
3. Luz DVD OUTPUT (verde)  
Esta luz aparece cuando el DVD/VCR está en modo  
DVD. Usted sólo puede mirar DVDs cuando la Luz  
DVD OUTPUT verde está encendida. Para hacer que  
la Luz DVD OUTPUT verde se encienda, presione el  
Botón DVD en el control remoto o el Botón OUTPUT  
en el panel delantero.  
Presione para seleccionar el modo DVD o el modo VCR.  
GUsted puede cambiar el modo de salida ya  
presionando el Botón OUTPUT en el panel delantero  
o ya presionando el Botón DVD o VCR en el control  
remoto. Sin embargo, si usted presiona el Botón  
OUTPUT en el panel delantero primero, usted  
necesita volver a seleccionar el modo  
correspondiente presionando el Botón DVD o el  
Botón VCR en el control remoto.  
4. Luz VCR OUTPUT (Verde)  
Esta luz aparece cuando el DVD/VCR está en el modo  
VCR. Usted puede sólo mirar cintas cuando la Luz  
VCR OUTPUT verde está encendida. Para hacer que  
la Luz VCR OUTPUT verde se encienda, presione el  
Botón VCR en el control remoto o el Botón OUTPUT  
en el panel delantero.  
5. Cassette compartment  
19. Ventanilla de Sensor Remoto  
20. Luz DISC IN (verde)  
6. Botón POWER  
Presione para conectar y desconectar la alimentación.  
7. Luz POWER  
Se enciende cuando la alimentación está conectada.  
8. Botón STOP/EJECT (VCR)  
Se enciende cuando un disco está en el jugador de DVD.  
21. Luz PLAY (verde)  
Se enciende durante aparato de lectura del disco.  
22. Botón FWD/SKIP (DVD)  
G Botón de expulsión  
Presione para avanzar rápidamente el Disco. Presione el  
Botón PAUSE, luego presione el Botón FWD iniciar a  
reproducción en movimiento lento. Presione el Botón  
FWD repetidamente para cambiar la velocidad de  
avance del movimiento lento.  
Púlselo para sacar el videocasete de la videograbadora.  
G Botón Stop  
Presione detener el movimiento de la cinta.  
9. Botón PLAY (VCR)  
Presione para comenzar reproducción.  
10. Botones CHANNEL  
Presione para saltar Capítulos o Pistas.  
23. Botón PLAY (DVD)  
En el modo VCR, presione para cambiar canales TV  
en el DVD/VCR; presione para ajustar el seguimiento  
durante reproducción de movimiento normal o lento;  
presione para remover fluctuaciones verticales en una  
imagen fija.  
Comienza la reproducción del contenido del disco.  
24. Botón SKIP/REV (DVD)  
Presione para ver la imagen DVD en movimiento de  
inversión rápida o para invertir la reproducción de un  
DC de Audio.  
Presione para saltar Capítulos o Pistas.  
SP  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
25. Botón STOP (DVD)  
39. Botón T-SET  
Detiene la operación del disco.  
Presione este botón para poner al VCR en modo standby  
(modo espera activada) para la grabación con temporizador.  
40. Botón ANGLE  
26. Botón SPEED  
Presiona para seleccionar la velocidad de grabación de  
VCR (SP o SLP)  
Presione para cambiar el ángulo de cámara para ver la  
secuencia que se está reproduciendo desde un ángulo  
diferente.  
27. Botón POWER  
Presione para conectar y desconectar la alimentación.  
28. Botones numéricos  
41. Botón REPEAT  
GModo DVD  
Repite la reproducción del disco, título, capítulo o pista  
actual.  
Presiónelos para seleccionar elementos numerados  
en un menú.  
42. Botón A-B REPEAT  
+10  
Repite la reproducción de una sección seleccionada.  
43. Botón SEARCH MODE  
GModo DVD  
Use este botón para ingresar números inguales o  
mayores que 10.  
GModo VCR  
Presione para tener acceso o remover la indicación  
de búsqueda, que le permite ir directamente a un  
Título/Capítulo/Pista/Tiempo especificado.  
GModo VCR  
Presione para seleccionar canales de TV en el  
DVD/VCR. Para seleccionar canales, entre números  
de canal como un número de dos dígitos para los  
resultados más rápidos. Por ejemplo, para  
seleccionar canal 6, presione 0.6.  
29. Botón DISPLAY  
Presione para avanzar o rebobinar rápidamente la  
cinta a una longitud específica de tiempo.  
44. Botón CLEAR/C.RESET  
GModo DVD  
GModo DVD  
Presione para tener acceso o remover la pantalla de  
visualización durante reproducción DVD o CD de audio.  
GModo VCR  
Presione para reponer el ajuste.  
GModo VCR  
Presione para reponer el contador. Presione para  
salir de la pantalla menu.  
Presione para tener acceso o remover visualización  
de estado en pantalla de VCR.  
45. Botón RETURN  
30. Botón DVD  
GModo DVD  
Presione antes de utilizar el control remote para  
funciones DVD.  
Vuelve a la operación previa.  
46. Botones de flecha  
GUsted puede cambiar el modo OUTPUT presionando  
OUTPUT en el panel delantero o presionando DVD  
o VCR en el control remoto. Sin embargo, si usted  
presiona primero OUTPUT en el panel delantero,  
necesitará volver a seleccionar el modo  
correspondiente presionando DVD o VCR en el  
control remoto.  
Utilice cuando haga ajustes mientras mira la indicación  
en una pantalla de TV.  
GModo VCR [página 16]  
Botones p/o  
Presiónelos para ingresar dígitos cuando establezca  
un programa (por ejemplo: puesta en hora del reloj o  
programación de temporizador). Presiónelos para  
seleccionar los modos de ajuste desde el menú de la  
pantalla.  
31. Botón  
h
GModo DVD  
Presiónelo para ver la imagen de un DVD en retroceso  
rápido. Presione PAUSE y luego presione este botón  
para iniciar la reproducción a cámara lenta. Presione  
repetidamente este botón para cambiar la velocidad de  
retroceso de la reproducción a cámara lenta.  
GModo VCR  
Botón  
B
Cuando programa (por ejemplo: puesta en hora del  
reloj o programación de temporizador), presiónelo  
para determinar su selección y pasar al siguiente  
paso que desee introducir. Presiónelo para  
determinar los modos de ajuste desde el menú de la  
pantalla. Presiónelo para añadir o borrar números de  
canales durante el preajuste de canales.  
Presione para rebobinar la cinta o para ver la imagen  
rápidamente en inversión durante el modo de  
reproducción.(Búsqueda en Rebobinado).  
Botón  
{
32. Botón Stop  
Presiónelo para cancelar un ajuste de programa de  
temporizador. Presiónelo para corregir dígitos  
cuando se programa (por ejemplo: puesta en hora del  
reloj o programación de temporizador). Presiónelo  
para añadir o borrar números de canales durante el  
preajuste de canales.  
GModo DVD  
Presiónelo para detener el disco.  
GModo VCR  
Presiónelo para detener la cinta.  
33. Botón RECORD  
Presione para iniciar una grabación.  
34. Botón MENU  
47. Botón ENTER  
GModo DVD  
GModo DVD  
Presione para aceptar un ajuste.  
Presione para visualizar el menú del Disco.  
GModo VCR  
48. Botón  
g
GModo DVD  
Presione para tener acceso al menú VCR.  
35. Botón TITLE  
Presione para avanzar rápidamente el Disco. Presione  
el Botón PAUSE, luego presione el Botón FWD  
iniciar a reproducción en movimiento lento. Presione  
el Botón FWD repetidamente para cambiar la  
velocidad de avance del movimiento lento.  
GModo VCR  
36. Botón SETUP  
Presiónelo para entrar en el modo de preparación del  
reproductor DVD.  
37. Botón ZOOM  
Amplía parte de una imagen reproducida-DVD.  
38. Botón MODE  
Presione para avanzar rápidamente la cinta o ver la  
imagen rápidamente en avance durante reproducción.  
(Búsqueda en Avance).  
Activa modo de reproducción de programa o  
reproducción aleatoria cuando se reproducen CDs o  
MP3. Ajusta Nivel de negro SONIDO VIRTUAL  
SURROUND.  
49. Botón PLAY  
GModo DVD  
Presiónelo para iniciar la reproducción.  
GModo VCR  
39. Botón SUBTITLE  
Presione para seleccionar un idioma de subtítulo deseado.  
Presiónelo para iniciar la reproducción.  
SP  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
50. Botón VCR  
GPosición VCR  
Presione antes de utilizar el control remoto para  
Para ver la reproducción, monitorear las grabaciones  
de vídeo o ver un programa de TV utilizando el  
sintonizador de la VCR.  
funciones de VCR.  
GUsted puede cambiar el modo OUTPUT presionando  
OUTPUT en el panel delantero o presionando DVD  
o VCR en el control remoto. Sin embargo, si usted  
presiona primero OUTPUT en el panel delantero,  
necesitará volver a seleccionar el modo  
correspondiente presionando DVD o VCR en el  
control remoto.  
GPosición TV  
Para ver un programa de TV o para ver un programa  
mientras se graba otro.  
54. Botones SKIP/CH  
GModo DVD  
Presione para saltar Capítulos o Pistas.  
GModo VCR  
51. Botón PAUSE  
GModo DVD  
Presione para cambiar canales de TV en la  
DVD/VCR.  
Presione para pausar la reproducción de Disco.  
Presione repetidamente para avanzar la imagen DVD 55. Botón AUDIO  
paso a paso (o un fotograma cada vez).  
GModo VCR  
Presione para seleccionar un idioma de audio deseado  
o modo de sonido.  
Mientras graba, presione para detener  
provisionalmente la grabación (pausa). Presione por  
segunda vez para reanudar la grabación normal.  
Usted no puede pausar Grabación de Un-Toque. O,  
presione durante la reproducción de cinta para  
congelar la imagen.  
Notas  
¡Si desea utilizar el mando a distancia para operar con la  
Unidad Combo DVD/VCR, presione DVD en el mando a  
distancia antes de ejecutar otras órdenes de DVD.  
Verifique que la luz de salida DVD está activada.  
¡Para utilizar el mando a distancia para usar otras carac-  
terísticas del VCR, presione VCR en el mando a distancia  
antes de comenzar el uso de otros órdenes con los botones  
VCR. Verifique que la luz verde de salida VCR está acti-  
vada.  
52. Botón SLOW  
Durante la reproducción de cinta, presione mirar la cinta  
de videó a movimiento lento. Presione de nuevo para  
reanudar la reproducción normal. Este Botón no afecta  
la reproducción DVD.  
53. Botón VCR/TV  
Utilice para seleccionar la posición VCR o TV.  
VISIÓN TRASERA  
56 57  
58  
59  
60  
DVD  
S-VIDEO COMPONENT AUDIO  
DVD/VCR  
VCR  
AUDIO OUT  
DIGITAL  
AUDIO OUT  
OUT  
VIDEO OUT  
OUT  
ANT-IN  
L
Y
AUDIO IN  
Cb  
Cr  
L
R
COAXIAL  
ANT-OUT  
VIDEO OUT  
VIDEO IN  
R
66  
64  
62  
65  
63  
61  
56. Toma ANTI-IN (Entrada de Antena)  
Conecte su antena, caja de cable o caja de  
descodificador de satélite.  
63. Toma S-VIDEO OUT  
Conecte aquí un cable de S-Videó opcional y a la toma  
de entrada de S-Videó de un televisor. (sólo DVD)  
64. Toma VIDEO IN  
57. Tomas DVD/VCR AUDIO OUT  
Conecte aquí los cables de audio provistos y a las  
tomas de entrada de audio de un televisor u otro  
equipo de audio.  
Conecte un cable procedente de la toma de salida de  
videó de un camcorder, otra VCR o una fuente de  
audio-visual (reproductor de disco láser, reproductor de  
disco de videó, etc.) aquí.  
58. Toma AUDIO IN  
Conecte aquí los cable de audio procedentes de las  
toma de salida de audio de un camcorder, otra VCR o  
una fuente de audio.  
65. Toma DVD/VCR VIDEO OUT  
Conecte aquí el cable de videó amarillo (provisto) y a  
la toma de entrada de Videó de TV.  
59. Cordón de Alimentación AC  
Conecte a una toma de corriente AC estándar para  
suministrar corriente al DVD/VCR.  
66. Toma ANT-OUT (Salida de Antena)  
Utilice el cable coaxial RF provisto para conectar esta  
toma a la Toma ANTENNA IN en su TV.  
Caja de cable o Sistema de Radiodifusión Directa.  
Sólo DVD  
CUIDADO: No toque las clavijas de de conexiones de  
la parte posterior del aparato. Descargas elec-  
troestáticas pueden averiar al aparato de forma per-  
manente.  
60. Tomas COMPONENT VIDEO OUT  
Conecte aquí los cables de videó componente  
opcionales y a las tomas de entrada de Videó  
componente de un televisor.  
61. Toma COAXIAL  
Conecte aquí un cable de audio digital coaxial opcional  
y a la toma de entrada de audio digital coaxial de un  
descodificador o receptor de audio.  
62. Tomas DVD ANALOG AUDIO OUT  
Conecte aquí los cables de audio provistos y a las  
tomas de entrada de audio de un televisor u otro  
equipo de audio (sólo DVD).  
SP  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
CAMBIO DE VCR/DVD  
Debido a que este producto es una combinación de videograbadora y reproductor de DVD,  
debe seleccionar primero el equipo que desea hacer funcionar con el botón OUTPUT.  
MODO VCR  
MODO DVD  
Presione el Botón VCR en el control remoto.  
(Verifique que la Luz VCR OUTPUT está enendida.)  
Presione el Botón DVD en el control remoto.  
(Verifique que la Luz DVD OUTPUT está encendida)  
Notas  
¡Presionando sólo el Botón OUTPUT en el panel delantero no cambia el modo del control remote. Usted  
siempre necesita seleccionar el modo correcto en el control remote, también.  
POWER  
OPEN/CLOSE  
CHANNEL  
STOP/EJECT  
PLAY  
POWER SPEED AUDIO  
DVD  
VCR  
VIDEO  
AUDIO  
OUTPUT  
REC  
PLAY DISC IN  
DVD  
VCR TIMER/REC  
STOP  
SKIP/REV  
PLAY  
FWD/SKIP  
REW  
F.FWD  
1
4
7
2
5
8
0
3
SKIP/CH.  
6
VCR/TV  
SLOW  
9
+
10  
Botón DVD  
Luz DVD OUTPUT  
DISPLAY DVD  
VCR  
PAUSE  
Botón VCR  
OUTPUT  
PLAY  
STOP  
DVD  
VCR TIM  
RECORD  
MENU  
Luz VCR OUTPUT  
ENTER  
SETUP  
TITLE  
RETURN  
SEARCH  
MODE  
CLEAR/  
MODE ZOOM  
C.RESET  
Botón OUTPUT  
SUBTITLE ANGLE REPEAT  
A
B
T-SET  
SP  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
CONEXIONES  
CONEXION A UN TV SIN TERMINALES A/V  
1. Desconecte el cordón de alimentación AC del toma de corriente AC.  
2. Desconecte la antena o cable del TV.  
3. Conecte la antena o cable a la toma ANT.IN del DVD/VCR.  
4. Conecte el DVD/VCR al TV utilizando el cable coaxial RF.  
5. Enchufe los cordones de alimentación CA del DVD/VCR y TV dentro de las tomas de corriente AC.  
CANAL DE SALIDA RF para DVD/VCR  
1. Conecte el DVD/VCR a un TV utilizando un cable RF (consulte CONEXION A UN TV SIN  
TERMINALES A/V.)  
2. Seleccione el canal 3 en su TV.  
3. Presione PLAY.  
GSi hay ruido cambie el canal de salida RF de la UNIDAD COMBINADA DVD/VCR al canal 4  
presionando PLAY en la videograbadora durante 3 segundos durante la reproducción.  
CONEXION A UN TV CON TERMINALES A/V  
Por favor, vea la [Fig.1] en la página 13 para detalles.  
CONECTANDO A UN TV QUE TIENE TOMA DE ENTRADA DE S-  
VÍDEO o TOMAS DE ENTRADA DE VÍDEO COMPONENTE  
Por favor, vea la [Fig. 2] en la página 14 para detalles.  
CONEXION A UN AMPLIFICADOR ESTERO EQUIPADO CON  
TOMAS DE ENTRADA DIGITAL COMO UNA PLATINA DE MINIDIS-  
COS O UNA PLATINA DE CINTAS AUDIODIGITALES  
Por favor, vea la [Fig. 4] en la página 14 para detalles.  
CONEXION A UN RECEPTOR CON DESCODIFICADOR DIGITAL DOLBY  
Por favor, vea la [Fig. 5] en la página 15 para detalles.  
CONEXION A UN SISTEMA DE AUDIO ANALOGICO  
Por favor vea la [Fig. 6] en la página 15 para detalles.  
PREPARACIÓN  
PREPARACIÓN DE CANAL AUTOMÁTICA  
VCR  
1
2
Necesita conectar primero la antena o el cable  
al VCR. Entonces, conecte el enchufe  
DVD/VCR a una fuente de corriente CA  
estándar de su vivienda.  
4
5
Seleccione Idioma de Pantalla (ENGLISH,  
FRANCAISo ESPAÑOL) mediante los  
botones K ó L. Después, presione el botón B.  
Comience la preselección del canal  
presionando el botón B una vez. El  
Encienda la televisión y ponga el canal 3.  
sintonizador comienza a escasear o buscar  
y memoriza los canales activos de su área.  
¡Si aparece ruido, cambie el canal de salida RF del  
VCR al canal 4 presionando el botón PLAY durante  
3 segundos mientras esté la cinta en funcionamiento  
operación visualización (PLAYBACK). Después  
seleccione el mismo canal (Canal 4) de su TV. (Vea  
CANAL SALIDA RFen la página 13 para más  
detalles.)  
¡El VCR distingue entre los canales estándar y  
canales cable.  
6
Después de haber buscado los canales, el  
sintonizador se para en el canal memorizado  
más bajo. La pantalla de TV vuelve al modo  
TV.  
3
Encienda el VCR presionando el botón POWER,  
la luz POWER se encenderá.  
SP  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
PREPARACIÓN DE RELOJ  
REPRODUCCIÓN DE UN DISCO  
VCR  
REPRODUCIENDO UN DVD,  
VIDEO O UN CD AUDIO  
1
Seleccione el menú principal mediante el  
botón MENU.  
DVD  
CD  
¡Si el reloj no ha sido ajustado, el menú AJUSTE  
DE RELOJ aparece primero. En este caso, siga el  
paso [3].  
PASOS INICIALES  
¡Encienda la televisión, el amplificar y cualquier  
otro componente que esté conectado al DVD.  
¡Asegúrese de que la televisión y el receptor de  
audio (disponible en los comercios) esté ajustado  
en el canal correcto.  
¡Seleccione el modo DVD presionando el botón  
DVD que está situado en el mando a distancia o el  
botón output situado en el panel frontal.  
2
3
Seleccione AJUSTE DE RELOJmediante  
el botón K ó L. Después, presione B.  
Ajuste el reloj.  
1) Ajuste el mes  
Presione el botón o ó p repetidamente.  
Entonces, presione B.  
1
2
Presione el botón POWER.  
Presione el botón OPEN/CLOSE para abrir la  
bandeja de carga para discos.  
2) Ajuste el d a  
Presione el botón o ó p repetidamente.  
Entonces, presione B.  
3
4
Ponga el disco elegido en la bandeja, con la  
etiqueta hacía arriba.  
3) Ajuste el a o  
Presione PLAY.  
¡La bandeja se cerrará automáticamente, y empezará  
la reproducción desde el primer capítulo o pista del  
disco.  
Presione el botón o ó p repetidamente.  
Entonces, presione B.  
El día de la semana aparecerá automáticamente.  
Si la reproducción no se inicia automáticamente,  
presione el botón PLAY.  
4) Ajuste la hora  
¡Cuando se reproduce un DVD que tiene un título  
de menú grabado, puede aparecer en la pantalla.  
Presione el botón o ó p repetidamente.  
Entonces, presione B.  
5
Presione STOP dos veces para poner fin a  
la reproducción.  
5) Ajuste los minutos  
Presione el botón o ó p repetidamente.  
Entonces, presione B.  
6) Ajuste AM PM  
AJUSTE DE RELOJ  
MES DIA  
AÑO  
Presione el botón o ó  
repetidamente.  
p
03 17 LUN 2003  
/
HORA MINUTO AM/PM  
05  
:
40  
PM AM  
PM  
¡Para retroceder un paso presione s.  
4
Inicie el reloj mediante el botón  
CLEAR/C.RESET ó el botón B.  
SP  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
MEMO  
EN  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
MEMO  
EN  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
MEMO  
EN  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1L25  
FUNAI CORPORATION  
LIMITED WARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workman-  
ship as follows:  
DURATION:  
PARTS:  
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from  
the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded  
from this warranty.  
LABOR:  
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date  
of original retail purchase.  
LIMITS AND EXCLUSIONS:  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE  
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH  
THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or  
if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does  
not apply to any product not purchased and used in the United States.  
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It  
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not  
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,  
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this prod-  
uct or damage which results from fire, flood, lightning or other acts of God.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE  
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY  
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE  
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF  
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT-  
NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTA-  
TIVES IN THE UNITED STATES.  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED  
SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHO-  
RIZED SERVICE FACILITY.  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS  
THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE  
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT  
FUNAI CORP.  
ATTENTION:  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT  
WITHOUT PRIOR NOTICE.  
To locate your nearest FUNAI Authorized Service Center or for general service procedure,  
please call 1-800-242-7158 or write to the following:  
FUNAI CORPORATION  
Customer Service  
100 North Street; Teterboro, NJ 07608  
Tel :1-800-242-7158  
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.  
Printed in China  
0VMN03747  
#####  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H9402UD  

Sharp Microwave Oven CD1800M User Manual
Sharp Projection Television XG P10XU User Manual
Sony Camcorder XC 555 555P User Manual
Sony Cassette Player WM ES392 User Manual
Sony DJ Equipment SDP EP70 User Manual
Sony Stereo Amplifier XM D400P5 User Manual
Sterling Dehumidifier 350 2100 CFM User Manual
Sunfire Speaker True Subwoofer Architectural User Manual
Tannoy Cell Phone W395 User Manual
Tannoy Speaker System SFX 51 User Manual