Owner’s Manual
Recordable disc
• We strongly recommend using any DVD-R 8x, MAXELL DVD-R 16x and DVD-RW 4x
disc to assure good recording quality.
• Discs that tested and proven to be compatible with this recorder:
VERBATIM DVD-R 8x VERBATIM DVD-RW ꢀx
MAXELL DVD-R 16x
JVC DVD-RW 4x
DVD Recorder with Video Cassette Recorder
DVR91VG
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
Supplied Accessory
• Remote control
(NB197UD) with
two AA batteries
• RF cable
(WPZ0901TM00ꢀ)
• Audio/Video cables • Owner’s Manual
• Quick Use Guide
(1VMNꢀꢀ805)
(WPZ010ꢀTM015
(1VMNꢀꢀ804)
or WPZ010ꢀLTE01)
Owner’s Manual
Please read before using this equipment.
If you need additional operating assistance after reading this owner’s manual or
to order replacement accessories, please call
TOLL FREE : 1-800-605-8453
Before you use this unit , you need to complete connections. Refer to
“Connections” on pages 14-16.
To record a program easily, refer to “Easy DVD recording” on pages 17-18 after
connections are completed.
(You CANNOT record on any copyright protected DVD disc with this unit.)
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Precautions (cont’d)
IMPORTANT SAFEGUARDS
1. Read Instructions - All the safety and operating
instructions should be read before the appliance is
operated.
NFPA No. 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)
ꢀ. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description
otherwise required in item 5.
FIGURE A
ANTENNA
LEAD
WIRE
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
NEC – NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
6. Attachments - Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this product near water,
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.
14. Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with
them might be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind
into this product through any openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any
kind on the product.
8. Accessories - Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and
serious damage to the appliance. Use only with a cart,
stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting
of the appliance should follow the
manufacturer's instructions and
should use a mounting accessory
recommended by the manufacturer. An
appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
9. Ventilation - Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply
to your home, consult your appliance dealer or local
power company. For products intended to operate from
battery power, or other sources, refer to the operating
instructions.
11. Grounding or Polarization - This product is equipped with
a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
1ꢀ. Power Cord Protection - Power supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
18. Servicing - Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
19. Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified technician
to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in
performance this indicates a need for service.
ꢀ0. Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
ꢀ1. Safety Check - Upon completion of any service or repairs
to this product, ask the service technician to perform
safety checks to determine that the product is in proper
operating condition.
13. Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/
ꢀꢀ. Heat - This product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Precautions (cont’d)
Installation Location
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit.
Do not place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or
humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block
the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong
magnetic fields.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to
our Authorized Service Center for servicing.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm
place or after heating a cold room or under conditions of high humidity. Do not use this unit at least
for ꢀ hours until its inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Notice for progressive scan output
Consumers should note that not all high definition television sets are fully compatible with this
product and may cause artifacts to be displayed in the picture. In case of picture problems with 5ꢀ5
progressive scan output, it is recommended that the user switch the connection to the ‘standard
definition’ output. If there are questions regarding your TV set compatibility with this 5ꢀ5p DVD
recorder, please contact our customer service center.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Precautions (cont’d)
Maintenance
SERVICING
• Please refer to relevant topics on Troubleshooting on pages 78-81 before returning the product.
• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-
serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned
on the front page to locate an Authorized Service Center.
CLEANING THE CABINET
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing
alcohol, spirits, ammonia or abrasive.
CLEANING DISCS
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do
not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent,
abrasive cleaning agents or antistatic spray intended for analog records.
CLEANING THE DISC LENS
• If this unit still does not perform properly although you refer to the relevant sections and to
“Troubleshooting” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your
dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt
accumulated on the video heads after a long period of use, or the usage of rental or worn tapes
can cause this problem. If a streaky or snowy picture appears during playback, the video heads in
the unit may need to be cleaned.
1.Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.
ꢀ.If a Video Head Cleaner does not solve the problem, please call our help line mentioned on the
front page to locate an Authorized Service Center.
NOTES:
• Remember to read the instructions along with the video head cleaner before use.
• Clean video heads only when problems occur.
IR SIGNAL CHECK
If the remote control does not work properly, you can test if the remote control sends out the infrared
signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to
define the cause of malfunction.
• With an AM radio:
Tune an AM radio to a band with no broadcasting. Press a button on remote control toward the
radio. Sound will be fluttering when you press any key and the radio receives the signal. This
means the remote control unit is working.
• With a digital camera (including built-in camera of cellular phone):
Direct a digital camera to remote control, press and hold a button on remote control. If infrared
light appears through digital camera, the remote is working.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories.
Dolby Digital Recording
®
“Dolby Digital Recording enables consumers to record high-quality video with stereo sound on
recordable DVD discs. The technology, when utilized instead of PCM recording, also saves record-
able disc space, allowing for higher video resolution or extended recording time on each DVD.
DVDs created using Dolby Digital Recording will play back on all DVD-Video players.”
Note: This is true when the players are compatible with actual recordable DVD discs.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Table of contents
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Before you start . . . . . . . . . . . . . . . . . . . 2
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Functional overview. . . . . . . . . . . . . . . . . . . . . . . . 8
Installing batteries in the remote control. . . . . . . 10
Using a remote control . . . . . . . . . . . . . . . . . . . . 10
The VCR / DVD recorder switching . . . . . . . . . . 10
Setup menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Display menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 1ꢀ
Title / Chapter search . . . . . . . . . . . . . . . . . . . . . 47
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Repeat/Random/Program playback . . . . . . . . . . 49
Repeat playback . . . . . . . . . . . . . . . . . . . . . . . . . 49
Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Program play. . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Selecting the format of audio and video . . . . . . 50
Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . 50
Switching audio soundtrack . . . . . . . . . . . . . . . . 51
Switching virtual surround system . . . . . . . . . . . 51
Switching camera angles . . . . . . . . . . . . . . . . . . 5ꢀ
Visual Noise Reduction. . . . . . . . . . . . . . . . . . . . 5ꢀ
Connections . . . . . . . . . . . . . . . . . . . . . 14
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . 14
Connection to a cable box or satellite box . . . . 15
Connection to an Audio System. . . . . . . . . . . . . 16
Editing . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Information on disc editing. . . . . . . . . . . . . . . . . 53
Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . 53
Editing discs in Video mode . . . . . . . . . . . . . . . . 53
Editing discs in VR mode . . . . . . . . . . . . . . . . . . 53
Editing discs in Video mode . . . . . . . . . . . . . . . . 54
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Putting names on titles . . . . . . . . . . . . . . . . . . . . 55
Setting or clearing chapter markers . . . . . . . . . . 56
Editing discs in VR mode (Original). . . . . . . . . . 57
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Setting titles to protect . . . . . . . . . . . . . . . . . . . . 58
Releasing titles from protecting . . . . . . . . . . . . . 59
Editing discs in VR mode (Playlist) . . . . . . . . . . 60
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Dividing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Combining titles . . . . . . . . . . . . . . . . . . . . . . . . . 6ꢀ
Adding titles to a Playlist. . . . . . . . . . . . . . . . . . . 63
Deleting a Playlist . . . . . . . . . . . . . . . . . . . . . . . . 63
Editing discs in VR mode (Original / Playlist). . 64
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . 64
Putting names on titles . . . . . . . . . . . . . . . . . . . . 65
Setting or clearing chapter markers . . . . . . . . . . 66
Setting pictures for thumbnails . . . . . . . . . . . . . . 67
Getting started . . . . . . . . . . . . . . . . . . . 17
Easy DVD recording. . . . . . . . . . . . . . . . . . . . . . . 17
Initial setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Getting channels automatically. . . . . . . . . . . . . . 19
Adding / deleting channels . . . . . . . . . . . . . . . . . ꢀ0
Selecting the TV stereo or SAP . . . . . . . . . . . . . 21
Setting the clock. . . . . . . . . . . . . . . . . . . . . . . . . . 22
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . ꢀꢀ
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . ꢀ3
Setting the Daylight Saving Time . . . . . . . . . . . . ꢀ4
Selecting the TV aspect ratio . . . . . . . . . . . . . . . 24
Recording . . . . . . . . . . . . . . . . . . . . . . . 25
Information on DVD recording . . . . . . . . . . . . . . 25
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ꢀ5
Recordable disc . . . . . . . . . . . . . . . . . . . . . . . . . ꢀ5
Recording speed. . . . . . . . . . . . . . . . . . . . . . . . . ꢀ5
Restrictions on recording . . . . . . . . . . . . . . . . . . ꢀ6
Information on copy control . . . . . . . . . . . . . . . . ꢀ6
Making discs playable on other DVD player (Finalize) .ꢀ6
Formatting a disc . . . . . . . . . . . . . . . . . . . . . . . . . 27
Choosing the recording format of a blank disc. . ꢀ7
Reformatting a disc. . . . . . . . . . . . . . . . . . . . . . . ꢀ8
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . ꢀ8
Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . . 29
One-touch Timer Recording (OTR). . . . . . . . . . . 30
Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . 31
Hints for Timer Recording. . . . . . . . . . . . . . . . . . 33
Settings for an external source . . . . . . . . . . . . . 34
Connection to an external source. . . . . . . . . . . . 34
Recording from an external source. . . . . . . . . . . 35
Setting a disc to protect . . . . . . . . . . . . . . . . . . . 35
Finalizing the discs . . . . . . . . . . . . . . . . . . . . . . . 36
Auto finalize . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Dubbing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Changing the Setup menu. . . . . . . . . . 68
Tour of the Setup menu. . . . . . . . . . . . . . . . . . . . 68
Language setting . . . . . . . . . . . . . . . . . . . . . . . . . 69
Display setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Audio setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Video setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Settings for Parental lock level. . . . . . . . . . . . . . 73
VCR functions. . . . . . . . . . . . . . . . . . . . 75
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Recording and One-touch Timer Recording . . . 75
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
One-touch Timer Recording (OTR) . . . . . . . . . . 76
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Index search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Other operations . . . . . . . . . . . . . . . . . . . . . . . . . 77
Playing discs . . . . . . . . . . . . . . . . . . . . 40
Information on DVD playback. . . . . . . . . . . . . . . 40
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Playing discs using the Disc menu. . . . . . . . . . . 4ꢀ
Playing back discs using the Title menu. . . . . . . 43
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Special playback . . . . . . . . . . . . . . . . . . . . . . . . . 44
Resume playback . . . . . . . . . . . . . . . . . . . . . . . . 44
Fast forward / Fast reverse. . . . . . . . . . . . . . . . . 44
Skipping TV commercials during playback. . . . . 44
Rapid Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Step by step playback. . . . . . . . . . . . . . . . . . . . . 45
Slow forward / Slow reverse play . . . . . . . . . . . . 45
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Others . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 78
RF output switch . . . . . . . . . . . . . . . . . . . . . . . . . 81
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Language code. . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Frequently Asked Questions. . . . . . . . . . . . . . . . 83
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Español . . . . . . . . . . . . . . . . . . . . . . . . . 84
Limited Warranty . . . . . . . . . . . Back Cover
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Features
This unit not only plays back DVDs, CDs and VHS tapes but also offers features for you to record on DVD
discs and edit them after that. The following features are offered with this unit.
Editing
Recording
DVD mode
DVD mode VCR mode
This unit is compatible with both DVD-RW, which is
rewritable repeatedly, and DVD-R, which is available
for one-time recording only. Also, this unit allows you to
record to the videotape. You can choose either one for
your convenience.
Deleting titles:
You can delete titles which you do not need anymore.
Making your own Playlist (VR mode):
With the original remains as it is, you can edit titles on
Various playlist as you prefer.
Recording up to 8 programs:
Putting names on titles.
You can program the unit to record up to 8 programs
within a month in advance. Daily or weekly program
recordings are also available.
Setting pictures for thumbnails.
Setting/clearing chapter markers.
Dividing / Combining titles.
One-touch Timer Recording:
Deleting parts of titles, etc.
You can easily set recording time as you prefer. Every
time [REC/OTR] is pressed during recording, the record-
ing time will be increased by 30 minutes up to 8 hours.
The unit will automatically turn off when it reached to the
recording time you set.
Protecting titles (VR mode):
You can prevent accidental editing or title erasing, with
protect function.
Compatibility
DVD mode
Dubbing mode:
You can copy a DVD disc to a videotape or copy a vid-
eotape to a DVD disc. This function will be possible only
if the DVD disc or a videotape is not copy protected.
You cannot record on a videotape when its record tab is
removed.
Left channel stereo recording:
This unit can record the Left channel monaural sound as
Left and Right channel sound automatically.
Playback of discs recorded in Video mode on a regu-
lar DVD player (Video mode):
Discs recorded in the Video mode can be played back
on regular DVD players, including computer DVD drives
compatible with DVD-Video playback*. You will need to
finalize the discs recorded in Video mode to play them
back on other DVD players.
* DVD-Video Format (Video mode) is a new format for
recording on DVD-RW/R discs that was approved by the
DVD Forum in 2000. Adoption of this format is optional
for manufactures of DVD playback devices, and there
are DVD-Video players, DVD-ROM drives or other DVD
playback devices that do not play back DVD-RW/R discs
recorded in the DVD-Video Format.
DVD mode
Automatic Chapter marker setting:
You can mark each title of recording with chapter mark-
ers as you set in the Setup menu before recording.
Automatic Title menu making (Video mode):
The unit makes title menus automatically when finalizing
the disc.
Others
Progressive Scan system
Unlike conventional interlace scanning, the progressive
scan system provides less flickering and higher resolu-
tion images than the traditional scanning system does.
Automatic Playlist making (VR mode):
A Playlist will be prepared from an Original title, so that
you can edit titles on a Playlist as you prefer. An Original
title is kept as it is.
Automatic finalizing (Video mode):
The unit can finalize discs automatically after finishing all
Timer Recordings or when the disc runs out recordable space.
Symbol in this Owner’s Manual
The availability of many functions of this unit depends on the
disc type or the recording mode.
Playback
DVD mode
To specify disc type or recording mode for each function, we
put the following symbols at the beginning of each function.
Theater quality sound at your home:
When connecting the unit to an amplifier or a decoder
which is compatible with Dolby Digital, you can experi-
ence the theater-quality sound environment.
Quick search for what you want to watch:
You can easily find the part you want to watch using title,
chapter or time search functions.
Start Playback from Original and Playlist (VR mode):
You can play back titles from either an Original title or Playlist.
Virtual Surround System:
You can enjoy stereophonic space through your exciting
ꢀ channel stereo system.
Symbol
Description
Available to DVD-Video discs
DVD-V
Video
Available to DVD-RW in Video mode
Available to DVD-RW in VR mode
DVD-RW
VR
DVD-RW
Available to DVD-R discs
DVD-R
CCDD
Available to Audio CDs
Available to VHS tapes
Use only
this unit.
tapes marked with
VCR
VCR mode
Quick search for what you want to watch:
Indicates that you need to select the DVD
mode by pressing [DVD] on the remote
control before proceeding next step.
First:
You can easily find the part you want to watch using the
Index search/Time search functions. An index mark will
be assigned at the beginning of each recordings you
make. For Time search function, you can go to a specific
point on a videotape by entering the exact amount of
time you wish to skip.
DVD
VCR
(Press:)
Indicates that you need to select the VCR
mode by pressing [VCR] on the remote
control before proceeding next step.
First:
(Press:)
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Functional overview
2
3*
4
Front Panel
OPEN/CLOSE
A
POWER
REW
F.FWD STOP/EJECT PLAY
DUBBING
STOP
PLAY
E
D
C
A
B
C
B
OUTPUT SELECT
VCR
DVD
S
-
VIDEO
VIDEO
L AUDIO R
- -
L
CHANNEL
K
(*)The unit can also
be turned on by
pressing these
buttons.
VCR
s
B
DVD
RECORD
RECORD
20 18
22 21 19 17
13 11 9*
15 14 12 10
1
16
8
7 6 5
1.POWER button / indicator (DVD/VCR)
14.DUBBING button (DVD/VCR)
Press to turn on and off the unit.
Press to start VCR to DVD (DVD to VCR) duplication
which you set in the Setup menu.
Red LED lights up when power is on.
2.Cassette compartment (VCR)
Insert a videotape here.
15.CHANNEL L / K button (DVD/VCR)
Press to change the channel up and down.
3.OPEN/CLOSE A button (DVD)*
Press to open or close the disc tray.
16.Display
Shows various information and messages.
4.Disc tray (DVD)
17.VCR RECORD button
Place a disc when it is open.
Press once to start a recording. Press repeatedly to
start a One-touch Timer Recording.
5.AUDIO input jacks (LINE2) (DVD/VCR)
Use to connect external equipment with a standard audio cable. 18.PLAY B button (VCR)
6.VIDEO input jack (LINE2) (DVD/VCR)
Use to connect external equipment with a standard video cable. 19.STOP C / EJECT A button (VCR)
7.S-VIDEO input jack (LINE2) (DVD/VCR)
Use to connect the S-Video output of external
equipment with an S-Video cable.
Press to start playback.
EJECT A button
Press to remove the videotape from the cassette
compartment when the power is on or off.
STOP C button
8.DVD RECORD button
Press to stop videotape playback or recording.
Press to stop the proceeding Timer Recording in VCR.
Press once to start recording.
Press repeatedly to start a One-touch Timer Recording.
20.F.FWD D button (VCR)
9.PLAY B button (DVD)*
Press to start or resume play.
10.STOP C button (DVD)
Press to rapidly advance the videotape, or view the picture
rapidly in forward during playback. (Forward Search)
21.REW E button (VCR)
Press to stop playback or recording.
Press to stop the proceeding Timer Recording in DVD.
Press to rewind the videotape, or to view the picture rapidly
in reverse during the playback mode. (Rewind Search)
11.DVD indicator
22.Remote control sensor (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
Appears when the DVD output mode is selected.
12.OUTPUT SELECT button (DVD/VCR)
Press to select the component you wish to operate.
13.VCR indicator
Appears when the VCR output mode is selected.
• These jacks are
useful only in
DVD mode.
1
2
3
4
5
Rear Panel
DVD
AUDIO S-VIDEO
DVD/VCR
COMPONENT
VIDEO OUT
DIGITAL
S-VIDEO
IN
IN
-
AUDIO
-
OUT
ANTENNA
IN
AUDIO OUT
OUT
Y
L
L
PB
L
R
R
/CB
OUT
IN
COAXIAL
-
VIDEO
-
OUT
PR
R
/CR
OUT
12 1110
9 8 7
6
1. AC Power Cord (DVD/VCR)
8.VIDEO IN jack (LINE1) (DVD/VCR)
Connect to a standard AC outlet to supply power to this unit.
Use to connect external equipment with a standard
video cable.
2. COMPONENT VIDEO OUTPUT jacks (DVD only)
Use to connect a TV monitor with component video
inputs with a component video cable.
3. AUDIO IN jacks (LINE1) (DVD/VCR)
Use to connect external equipment with a standard
audio cable.
9.S-VIDEO IN jack (LINE1) (DVD/VCR)
Use to connect the S-Video output of external
equipment with an S-Video cable.
10.S-VIDEO OUT jack (DVD only)
Use to connect the S-Video input of a TV monitor, AV
receiver or other equipment with an S-Video cable.
4. AUDIO OUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with a standard audio cable.
11.AUDIO OUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other
equipment with a standard audio cable.
5. TV ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
12.COAXIAL DIGITAL AUDIO OUTPUT jack (DVD only)
Use to connect an AV receiver, Dolby Digital decoder
or other equipment with a coaxial digital input jack
with a digital coaxial cable.
6. TV ANTENNA OUT jack (DVD/VCR)
Use to connect an antenna cable to pass the signal
from the TV ANTENNA IN to your TV monitor.
7. VIDEO OUT jack (DVD/VCR)
Note
Use to connect a TV monitor, AV receiver or other
equipment with a standard video cable.
Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Functional overview (cont’d)
10. E button (DVD/VCR)
• DVD mode
23. CLEAR button (DVD/VCR)
Remote Control
• DVD mode
During playback, press to play
back in fast reverse.
Or when playback is paused,
press to play back in slow reverse.
• VCR mode
Press to clear the password
entered, to cancel the
17
18*
POWER
OPEN/CLOSE
programming for CD, to clear the
highlighted marker number in the
marker setup mode or to clear
the program once entered in the
Timer Programming list, etc.
• VCR mode
T-SET
TIMER PROG.
1
2
19
.@/:
1
ABC
2
DEF
3
Press to rewind the videotape
or to view the picture rapidly in
reverse during the playback mode.
11. Bx1.3/0.8 button (DVD)
During playback, press to
playback in a slightly faster/slower
speed with keeping the audio
quality.
12. SKIP H button (DVD)
During playback, press to skip to
the previous chapter or track.
Or when playback is paused,
press to play back in reverse step
by step.
CH
GHI
4
JKL
5
MNO
6
20
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Press to reset the tape counter.
24. ENTER button (DVD/VCR)
Press to confirm or select menu
items.
21
22
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
3
5
23
TOP MENU MENU/LIST RETURN
4
6
24
25
25. RETURN
(DVD/VCR)
button
Press to return to the previously
displayed menu screen.
26. REC/OTR button (DVD)
Press to activate the remote
control in DVD mode (refer to
page 10).
REC/OTR
DVD
REC/OTR
VCR
7
9
26
27
8
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
28
13. SLOW
button (VCR)
29*
10
SKIP
CM SKIP
ZOOM
SKIP
During playback, press to view the
videotape in slow motion.
14. CM SKIP button (DVD)
During playback, press to skip to
the 30 second advanced point.
15. DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD
to VCR) duplication which you set
in the Setup menu.
Press once to start a recording.
Press repeatedly to start a One-
touch Timer Recording.
27. DVD button
11
30
31
12
SLOW
SEARCH
13
14
32
33
DUBBING
AUDIO
34
15
Press to activate the remote
control in DVD mode (refer to
page 10).
Press to select the DVD output
mode.
16
( ) In DVD mode, the unit can also be
*
turned on by pressing these buttons.
1. POWER button (DVD/VCR)
Press to turn on and off the unit.
2. Number buttons (DVD/VCR)
Press to select channel numbers.
Press to select a title / chapter /
track on display.
16. ZOOM button (DVD)
During playback, press to enlarge
the picture on the screen.
17. T-SET button (DVD/VCR)
Press to set the unit in the timer
standby mode. In the timer
standby mode, press to cancel the
mode and to turn the unit on.
18. OPEN/CLOSE A button (DVD)*
Press to open or close the disc
tray.
28. D button (DVD/VCR)
• DVD mode
During playback, press to play
back in fast forward.
Or when playback is paused,
press to play back in slow forward.
• VCR mode
Also press to enter values for the
settings in the Setup menu.
Also press to start the index/time
search in VCR mode.
Press to rapidly advance the
videotape or view the picture
rapidly in forward during playback.
29. PLAY B button* (DVD/VCR)
Press to start or resume playback.
30. SKIP G button (DVD)
During playback, press to skip to
the next chapter or track.
Or when playback is paused,
press to play back in forward step
by step.
31. PAUSE F button (DVD/VCR)
Press to pause playback or
recording.
32. SEARCH button (VCR)
Press to call up the index or
time search menu.
33. STOP C button (DVD/VCR)
Press to stop playback or
recording.
34. AUDIO button (VCR)
During playback a HiFi videotape,
press to change the AUDIO OUT
setting “HIFI” and “MONO”.
3. DISPLAY button (DVD/VCR)
Press to display the On Screen
menu.
4. TOP MENU button (DVD)
Press to display the Title menu.
5. MENU/LIST button (DVD)
Press to display the Disc menu.
Press to change Original and
Playlist on the TV screen.
(VR mode only)
19. TIMER PROG. button (DVD/VCR)
Press to display the Timer
Programming list.
20. CH K / L buttons (DVD/VCR)
• DVD mode
Press to change the channel up
and down.
• VCR mode
Press to change the channel up
and down.
Press to adjust the tracking
during playback or in slow motion
of the videotape. Also while
playback is in Still Mode, you
can adjust the picture blurred
vertically.
6. Cursor K / L / { / B buttons
(DVD/VCR)
Press to select items or settings.
7. REC/OTR button (VCR)
Press to activate the remote control
in VCR mode (refer to page 10).
Press once to start a recording.
Press repeatedly to start a One-
touch Timer Recording.
21. VIDEO/TV button (DVD/VCR)
Press to select VIDEO or TV
position.
22. SETUP button (DVD/VCR)
Press to display the Setup menu.
During DVD playback, press and
hold for more than 3 seconds to
switch the progressive scanning
mode to the interlace mode.
8. VCR button
Press to activate the remote
control in VCR mode (refer to
page 10).
Press to select the VCR output mode.
9. REC SPEED button (DVD/VCR)
Press to change the recording
speed.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Functional overview (cont’d)
Installing batteries in the remote
control
Using a remote control
Keep in mind the following when using the remote
control:
Install two “AA” size batteries (supplied), matching
their polarity to those indicated inside battery
compartment of the remote control.
• Make sure that there is no obstacle between the
remote control and the remote sensor of the unit.
• Remote operation may become unreliable if
strong sunlight or fluorescent light is on the
remote sensor of the unit.
1
3
2
• Remote control for different devices can interfere
with each other. Avoid using remote control for
other equipment located close to the unit.
• Replace the batteries when you notice a fall-off of
the operating range of the remote control.
• The maximum operable ranges from the unit are
as follows.
Note:
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please follow the instruction
below:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the plus and minus ends of
each battery match the indications in the battery
compartment.
- Line of sight: approx. ꢀ3 feet (7m)
- Either side of the center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
• Remove batteries from equipment that is not going
to be used for a month or more.
• When disposing used batteries, please comply
with governmental regulations or public rules for
environmental protection that apply in your country
or area.
Within about
PO
WE
R
RE
W
23 feet (7m)
E
F
.F
WD
ST
OP
D
/EJE
CT
C
PL
A
A
Y
B
VC
R
OP
EN
/CL
OS
RE
CO
RD
E
A
RE
PEA
T
B
TRK
DU
BB
.
ING
D
V
D
L
CH
ANN
EL
K
ST
OP
OU
TP
UT
C
PLA
Y
VC
R s
S
EL
EC
B
T
B DV
D
D
V
D
RE
CO
RD
S
-
VID
EO
VID
EO
L
-
A
UD
IO
-
R
30°
30°
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
Remote
R
E
C
P
A
U
SE
k
control
RE
V
h
H
IP
PL
B
A
Y
T
OR
O
P
ST
OP
G
IG
M
E
C
I
N
N
U
A
L
/
FW
g
D
K
EN
P
LA EN
U
IS
M
TE
R
Y
L
T
The VCR / DVD recorder switching
Because this product is a combination of a VCR and a DVD recorder, you must select first which component
you wish to operate with [OUTPUT SELECT].
VCR MODE
Press [VCR ] on the remote control.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
(Verify that the VCR indicator is lit.)
OPEN/CLOSE
.@/:
1
ABC
2
DEF
3
A
CH
GHI
4
JKL
5
MNO
6
POWER
REW
F
.FWD STOP/EJECT PLA
Y
DUBBING
STOP
PLA
Y
E
D
C
A
B
C
B
OUTPUT SELECT
VCR
L
K
DVD
-
S VIDEO
VIDEO
L AUDIO R
- -
CHANNEL
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
VCR
s
B
DVD
RECORD
RECORD
DVD MODE
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
Press [DVD ] on the remote control.
(Verify that the DVD indicator is lit.)
VCR button
DVD button
REC/OTR
DVD
REC/OTR
VCR
Note:
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
• Pressing only [OUTPUT SELECT] on the front
panel DOES NOT switch the mode of the remote
control. You MUST select the correct mode on
the remote control.
• You cannot switch to another mode (DVD or
VCR) during in the timer-standby mode.
• Pressing [REC/OTR] (DVD) or [REC/OTR] (VCR)
on the remote control switches immediately its
respective mode so that you can start recording
directly on the appropriate media.
SKIP
CM SKIP
ZOOM
SKIP
OUTPUT SELECT
SLOW
SEARCH
VCR
DVD
s
B
DUBBING
AUDIO
DVD indicator
OUTPUT SELECT button
VCR indicator
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Functional overview (cont’d)
Guide to Displays the On Screen menu
This unit uses the following the On Screen menu for most operations: Setup Menu, Title list, Playlist, Original
and Display menu. They allow you to change the playback status of the disc during playback.
The Display menu also gives you information on the playback status of the disc or a videotape.
Setup menus
Press [SETUP] to display the Setup menu, then press [ENTER] to display each menu, using [K / L].
These menus provide entries to all main functions of the unit.
1.Format (DVD-RW only):
Allows you to erase all of the
recorded content on the disc.
The disc will be completely
blank.
• Erased content cannot be
called back.
<DVD-R / DVD-RW (Video mode)>
Setup
Required Setting
Playback
Display
1
2
3
4
5
6
7
Disc
Format
1
2
Recording
Clock
Finalize
Channel
Disc
• A DVD-RW disc formatted
with this unit cannot be
used in other DVD recorders
without any recording using
this unit.
• If you want to use a disc
only formatted with this unit
on another DVD recorder,
you have to re-format the
disc on that recorder.
2.Finalize:
Allows you to finalize a disc
containing recorded titles.
3.Disc Protect (VR mode
only):
Allows you to protect a disc
from accidental editing or
recording.
1.Required Setting:
To set up the required setting.
2.Playback:
To set up the unit to play
discs as you prefer.
3.Display:
To set up the OSD screen
and the front panel display of
the unit as you prefer.
4.Recording:
To set up the unit to record
on discs or tapes as you
prefer.
<DVD-RW (VR mode)>
Disc
Format
1
2
3
Finalize
Disc Protect OFF ON
<CD>
5.Clock:
To set up the clock of the
unit as you need.
CD Playback Mode
Random Play
4
5
Program Play
4.Random Play:
6.Channel:
To activate the random
playback feature.
5.Program Play:
To activate the programmed
playback feature.
To adjust the channel setting
of the unit as you prefer.
7.Disc / CD Playback Mode:
When a DVD-Video disc
(commercially available) or a
new DVD-R disc is inserted
into the unit, you cannot
select “Disc”.
“CD Playback Mode” is
available only when an Audio
CD disc is inserted into the
unit.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Functional overview (cont’d)
Display menu
DVD mode
5.Each icon means:
1.Indicates a disc type and a
format mode.
First:
DVD
: Search
Note: In some descriptions on
this manual, only one disc type
is indicated as an example.
2.Indicates a current channel
number and an audio status of
the program.
3.Indicates a recording mode and
possible recording time left.
4.Indicates a title number, chapter
number and the time elapsed of
disc play.
Press [DISPLAY] to call up the
Display menu. This menu will give
you the information on the disc.
Some operations are available
while disc is inserted in the unit.
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
4
1
: Marker
1
1
0:00:00
DVD-RW
: Noise Reduction
: Zoom
Video mode
CH 8
Stereo
: Surround
5
2
6.Indicates current disc status.
XP
1:01
6
3
Note:
• This is an example screen only for explanation. Displayed items will change depending on the actual mode.
• DISPLAY function is not available when the disc is not inserted.
VCR mode
1.Indicates current video status.
2.Indicates the current time.
VCR
First:
3.Indicates a current channel
number and an audio status of
the program.
Press [DISPLAY] to display the
On Screen display.
4.Indicates a recording or playing
speed.
5.Indicates a Tape Counter.
6.Audio status of the current
videotape.
1
12:00AM
CH 21
Stereo
2
3
SP
0:00:00
HIFI
4
5
6
Note:
• This is an example screen only for explanation. Displayed items will change depending on the actual mode.
1ꢀ EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Functional overview (cont’d)
Front Panel Display Guide
4
2
1
6
3
7
5
1. Current Status of the unit
:Appears when a DVD
disc is on the disc tray.
Appears when the Timer
Recording is proceeding
in DVD.
3. Recording speed
:Appears when a disc or a
videotape play is paused.
Indicates the recording speed of
the disc or a videotape.
:Appears when playing
back a disc or a
videotape.
4. Title/Track and Chapter mark
Appears when DVD is
in the Timer Recording
standby mode.
:Appears when indicating a
title/track number.
:Appears when the timer
programming or OTR has
been set and is proceeding.
:Flashes when all Timer
Recordings have been
finished.
:Flashes when a program
cannot be performed for
some reasons.
:Appears when indicating a
chapter number.
5. Displays the following
• Played-back time
• Current title / chapter / track
number
• Recording time / remaining time
• Clock
:Appears when a DVD-R
disc is on the disc tray.
:Appears during recording
process.
:Flashes when a recording
pauses.
:Appears when a DVD-
RW disc is on the disc
tray.
• Channel number
• VCR tape counter
• Remaining time for a One-touch
Timer Recording
:Appears when the Timer
Recording is proceeding
in VCR.
:Appears when VCR is
in the Timer Recording
standby mode.
:Flashes when a program
cannot be performed for
some reasons.
:Appears during repeat
playback (disc playback
only).
6.
:Appears in the afternoon
with the clock display.
:Appears when a videotape
is in the unit.
7.
2. Disc type and Current status
of the unit
:Appears when the
progressive scan system is
activated.
:Appears when an Audio
CD is on the disc tray.
:Appears during VCR to
DVD duplication process.
:Appears during DVD to
VCR duplication process.
Display message
Appears when the disc
tray is opening.
Appears when a disc is
loaded on the disc tray.
Appears when data is
being recorded on a
disc.
Appears when the disc
tray is closing.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connection to a TV
Antenna
Antenna
(Back of TV)
Cable
TV signal
Cable
TV signal
(Back of TV)
3
or
or
Connect
RF cable
(supplied)
4
Plug in the AC power
cord of this unit.
1
DVD
AUDIO S-VIDEO
DVD/VCR
COMPONENT
DIGITAL
S-VIDEO
IN
-
AUDIO
-
OUT
ANTENNA
IN
VIDEO OUT
AUDIO OUT
OUT
Disconnect
Y
L
L
PB
L
R
R
OUT
/CB
IN
COAXIAL
IN
-
VIDEO
-
OUT
2
PR
R
/CR
Connect
OUT
(Back of this unit)
Choose one of the following connections, depending on the capabilities of the equipment you possess.
Method 1
Method 2
Method 3
Good picture
Basic Audio
Better picture
Best picture
TV
COMPONENT
VIDEO IN
AUDIO IN
VIDEO IN
S-VIDEO IN
Y
P
B/CB
P
R/CR
Audio cable
(supplied)
This unit
<REAR PANEL>
Video cable
(supplied)
S-Video cable
(commercially
available)
Component video cable
(commercially available)
DVD/VCR
IN
-
AUDIO
-
OUT
L
DVD
AUDIO S-VIDEO
DVD/VCR
COMPONENT
VIDEO OUT
DIGITAL
S-VIDEO
IN
IN
-
-
AUDIO
-
OUT
ANTENNA
IN
AUDIO OUT
OUT
Y
L
L
P
B
/CB
R
L
R
R
OUT
IN
COAXIAL
VIDEO
-
OUT
P
R
/CR
R
OUT
or
DVD
DVD
DVD/VCR
DVD
S-VIDEO
COMPONENT
VIDEO OUT
AUDIO
OUT
Y
DVD
AUDIO S-VIDEO
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
OUT
Y
P
B
/CB
L
L
PB
OUT
OUT
COAXIAL
/CB
P
R
/CR
R
IN - VIDEO OUT
-
R
P
R
/CR
• These jacks are useful
only in DVD mode.
COMPONENT VIDEO OUT
VIDEO OUT
S-VIDEO OUT
AUDIO OUT
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
• Method ꢀ and method 3 are only useful in DVD mode.
• Although you can view images when using the connection Method 1 and ꢀ while Progressive Scan is
activated, they are in Interlace mode.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connection to a TV (cont’d)
Note
Set your TV to channel 3 or 4 if you use coaxial connection.
After you have completed connections
• Switch the input selector on your TV to an appropriate external input channel (usually near channel 0).
Press a button on the TV’s original remote control that selects an external input channel until the DVD
recorder’s picture appears. Check your TV owner’s manual for details.
Input Mode Names for Common TV Brands (Example)
Admiral
Curtis Mathis
GE
AUX
Panasonic
TV/VIDEO
LINE1, LINE2, 00, 90, 91, 92, 93 RCA
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93 Samsung
TV/VIDEO
Hitachi
INPUT, AUX
Sanyo
Sharp
Sony
VIDEO
JVC
VIDEO, VIDEO 1, VIDEO 2, VIDEO 3
00
Kenwood
LXI-Series
Magnavox
AUX
VIDEO1, VIDEO2, VIDEO3
00
Toshiba
Zenith
TV/GAME
00
AUX CHANNEL
To set progressive scan mode, refer to pages 72-73
• This unit compatible with the Progressive Scan System. The feature provides you with the higher definition
images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode
to “ON”.
Connection to a cable box or satellite box
(Back of this unit)
(Cable box or
Satellite box)
DVD/VCR
ANTENNA
IN
Cable TV signal
IN
OUT
E
RF cable
(supplied)
OUT
(Back of TV)
This connection allows you to view or record a scrambled channel. With this connection, channels cannot be
changed on this unit. You can view or record ONLY the channels you have selected on the cable box or the
satellite box.
• While you are recording, only the recorded channel can be viewed.
To select channels of the cable box or satellite box
1)Turn on this unit by pressing [POWER]. The “POWER” indicator on the front panel will appear. Then, press
[CHANNEL L / K] to select channel 3 or 4 (the same channel as the output channel of the cable box or
satellite box).
• If noise appears on the TV screen, press [VIDEO/TV] on the remote control.
• If you use the channel 4, you will need to change this unit’s RF output to channel 4. Refer to “RF output
switch” on page 81.
ꢀ)At the TV, select channel 3 or 4 (the same channel as you have selected at step 1).
3)At the cable box or satellite box, select the channel you want to view or record.
Note to the Cable TV System Installer :
This reminder is provided to call the Cable TV system installer’s attention to Article 8ꢀ0-40 of the National
Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground
shall be connected to the grounding system of the building, as close to the point of cable entry as possible.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
Method 1
Method 2
Stereo system
Dolby Digital decoder, MD
deck or DAT deck
AUDIO
COAXIAL
Analog audio
input jacks
Digital audio
input jack
Audio Coaxial Digital cable
(commercially available)
DVD
Audio cable
(supplied)
DIGITAL
AUDIO OUT
This unit
COAXIAL
<REAR PANEL>
DVD/VCR
IN
-
AUDIO
-
OUT
DIGITAL
L
AUDIO OUT
AUDIO OUT
R
Setup >Playback >Audio >Digital Out >
Setting
Connection
or
PCM
Dolby Digital
DVD
AUDIO
OUT
If output is Dolby Digital
encoded audio, connect to a
Dolby Digital decoder.
Stream
-
L
Unless connected to a Dolby
Digital decoder.
R
PCM
PCM
-
-
Connecting to an MD deck or
DAT deck.
* To complete these settings, refer to pages 71-7ꢀ.
Note
Note
• By connecting this unit to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital Multi-
channel surround sound as heard in the movie theaters.
• The audio source on a disc in a Dolby Digital Multi-
channel surround format cannot be recorded as digital
sound by an MD or DAT deck.
• Playing back a DVD using incorrect settings
may generate noise distortion and may also
damage the speakers.
• Playing back a DVD using incorrect settings may
generate noise distortion and may also damage the
speakers.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Easy DVD recording
The following will help you to understand easily how to record to DVD discs.
Note:
Make sure batteries are in the remote control and you have connected this unit and the TV correctly.
Step 1: Choose a disc type.
Step 2: Insert a blank disc.
There are several types of recordable DVD discs to
choose from. Choose a recordable DVD disc type
based on your playing/recording/editing require-
ments. See “DVD disc types” at the bottom of
this page for more information on the differences
between the different kinds of compatible media.
This unit can record on the following type of
discs.
Remote Control
POWER
CLOSE
T
T-SET
Turn on the
unit
1
2
.@/:
1
ABC
2
3
Select the
DVD mode
REC/OTR
REC SPEED
DVD
REC/OTR
VCR
PLAY
(or)
Open the
disc tray
3
4
POWER
OPEN/CLOSE
T-SET
TIMER PROG.
.@/:
1
ABC
2
DEF
3
For example, when you want to record repeat-
edly on the same disc, or when you want to
edit the disc after recording, select the rewrit-
able DVD-RW type disc.
When you want to save recordings without
any alteration, a non-rewritable DVD-R can be
your choice.
POWER
OPEN/CLOSE
T-SET
TIMER PROG.
.@/:
1
ABC
2
DEF
3
5
Close the disc
tray
Loading
This operation may take a
while to be recognized.
DVD disc types
Format the disc
When inserting a disc that
has already been recorded
on, you can delete those
contents by formatting that
disc.
: Most suitable
You want to
Record TV programs
: Can be used
: Some functions are limited
: Cannot be used
DVD-RW Video
DVD-R
DVD-RW VR
Reuse by deleting unwanted contents
Edit recorded contents
Formatting is only neces-
sary to prepare disc pre-
viously recorded on for
recording.
Details are on pages 27-28.
When you format a disc, the
entire contents on that disc
will be erased.
• The unit automatically
starts initializing when a
brand new DVD-RW disc
is inserted.
Edit/Record from connected equipment
Copy discs for distribution
*1
*1
Play on other DVD equipment
Features
Recording
Rewritable?
DVD-RW VR
DVD-RW Video
DVD-R
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
Can create chapters at fixed intervals (auto.)
Can create chapters wherever you like (manual)
Can record 16:9 size pictures
Yes
No
Yes
No
Can record Copy-Once programs
Editing
Can perform basic edit functions
Yes
Yes
Yes
No
Yes
No
Can perform advanced edit functions (Playlist edit)
*1
DVD-RW (VR mode) can only be played on
DVD equipment that is VR compatible.
Note:
For details of the above functions and implied
restrictions, see the explanations inside the manual.
EN 17
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Easy DVD recording (cont’d)
Step 3: Select the
recording
Step 4: Select the
desired
Step 5: Record
on DVD
speed.
channel.
disc.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
POWER
OPEN/CLOSE
TIMER PROG.
TOP MENU MENU/LIST RETURN
ENTER
T-SET
REC/OTR
DVD
REC/OTR
VCR
.@/:
1
ABC
2
DEF
3
PLAY
REC SPEED
x1.3/0.8
CH
GHI
4
JKL
5
MNO
6
SK
CM SKIP
ZOOM
IP
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
REC/OTR
DVD
REC/OT
SKIP
VCR
SKIP
SLOW
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
PLAY
REC SPEED
x1.3/0.8
DUBBING
AUDIO
TOP MENU MENU/LIST RETURN
PAUSE
CH 12
XP
0:58
I
Hint 1: Play the recorded contents
You can select the title you want to play from a
Start Rec.
Stop/Start
Stop Rec.
displayed menu, and immediately start to play.
Recorded contents are easily accessible, with
simple procedure of choosing a title on a chapter
Title 1
Title 2
in the menu screen.
What are titles and chapters?
The contents of DVD disc are generally
divided into titles. Titles may be further
divided into chapters.
Step 6: Stop the
recording.
Chapter 1Chapter 2Chapter 3 Chapter 1Chapter 2
REC/OTR
DVD
REC/OTR
VCR
Hint 2: Edit the recorded disc
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
You will find editing discs is easy. This unit offers convenient edit functions
which are possible only with DVD-RW/R discs.
Title list offers following editing functions.
• Putting names on titles
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
DUBBING
AUDIO
• Setting pictures for thumbnails
• Setting/clearing chapter markers
• Deleting titles or scenes
(Possible editing functions depend on the recording format and editing method.)
Original and Playlist (VR mode)
You can edit the recordings in Playlist without changing the original
recordings. Playlist does not take up much disc space.
Wait for a moment.
90%
(Appears only in the VR mode)
What “Original” or “Playlist” is for?
Throughout this manual, you will find Original and Playlist to refer to the
original content and the edited version.
• Original content refers to what’s originally recorded on the disc.
• Playlist content refers to the edited version of the original content.
Finalizing a Disc
• You need to record in video mode and finalize the disc to play it back on
other players.
C
• Once you finalize a disc recorded in Video mode, you cannot record or edit
any information on the disc.
• Discs recorded in VR mode can still be edited after finalization.
This operation may take
a while to be completed.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Initial setting
Turn on this unit for the first time,
you need to follow these steps.
4
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
Press [ENTER] to start Channel
Preset.
The unit will start getting channels
available in your area.
1
.@/:
1
ABC
2
DEF
3
1
CH
GHI
4
JKL
5
MNO
6
Press [POWER].
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
2
CH 1
Turn the TV on. Select the input
to which the unit is connected.
Refer to the table on page 15.
TOP MENU MENU/LIST RETURN
Auto Presetting Now
3
4
5
“Initial Setting” will automatically
appear.
Wait for several minutes to finish
channel scanning.
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
3
SKIP
CM SKIP
ZOOM
SKIP
5
Using [K / L], select your
desired language for the OSD.
Then press [ENTER] to go to
next step.
After channel setting is finished,
“Clock Setting” will appear.
Then press [ENTER].
SLOW
SEARCH
DUBBING
AUDIO
Initial Setting
Initial Setting
Clock Setting
English
Français
Español
6
Follow to step 3 on page 23 to
“Manual Clock Setting”.
Channel setting
If you have changed antenna
connection, we recommend you
to program available channels
in your area with the following
procedures.
2
POWER
OPEN/CLOSE
T-SET
TIMER PROG.
Using [K / L], select “Channel”.
Press [ENTER].
Channel menu will appear.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
Getting channels
automatically
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
4
3
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Using [K / L], select “Auto
Preset”. Press [ENTER].
The unit will start getting channels
available in your area.
Wait for several minutes to finish
channel scanning.
TOP MENU MENU/LIST RETURN
1
Press [SETUP].
2
3
Setup
REC/OTR
DVD
REC/OTR
VCR
Required Setting
Playback
Display
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
4
SKIP
CM SKIP
ZOOM
SKIP
Recording
Clock
Press [SETUP] to exit.
• You can select only the
channels memorized in this unit
by using [CHANNEL L / K] or
[CH K / L].
SLOW
SEARCH
Channel
Disc
DUBBING
AUDIO
To select a channel
You can select a channel by directly entering channel using the Number buttons on the remote control.
Notes for using the Number buttons:
• When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.
(For example: 117, press [1], [1], [7])
• You must precede single-digit channel numbers with a zero (For example: 0ꢀ, 03, 04 and so on).
• You can select the line input mode (“L1” or “Lꢀ”). To select “L1” by pressing [0], [0], [1]. To select “Lꢀ” by
pressing [0], [0], [2]. Details are on pages 34-35.
Note
• You cannot change the channel when one of the components of the unit (VCR or DVD) is in the recording,
OTR or Timer Recording mode.
• If the auto presetting is canceled during presetting, some of the channels not yet preset may not be received.
• The selection will depend on how you receive the TV channels.
Press [RETURN
] or [SETUP] to cancel the auto presetting during scanning.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Channel setting (cont’d)
Adding / deleting
channels
4
Select the channel number to
add or delete.
The channels you no longer
receive or seldom watch can
be deleted from the memory.
You also may add channels into
memory.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
Press [{] or [CH L] to move to a
smaller channel number.
Press [B] or [CH K] to move to a
larger channel number.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
4
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
6
DISPLAY
SPACE
0
CLEAR
• Use [{ / B] to move through
the channels one by one,
including the ones not in the
channel memory, while using
[CH K / L] to move through the
channels only in the channel
memory.
SETUP
ENTER
1
TOP MENU MENU/LIST RETURN
Press [SETUP].
2
3
4
5
2
REC/OTR
DVD
REC/OTR
VCR
Using [K / L], select “Channel”.
Press [ENTER].
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Press the Number buttons to
select a channel number directly.
SKIP
CM SKIP
ZOOM
SKIP
Channel menu will appear.
SLOW
SEARCH
Manual Preset
VCR DVD
DUBBING
AUDIO
3
Using [K / L], select “Manual
Preset”. Press [ENTER].
Manual Preset menu will appear.
CH
7
Add
Delete
Manual Preset
VCR DVD
CH
2
Add
Delete
5
Using [K / L], select “Add” or
“Delete”. Press [ENTER].
The channel number will be
added or deleted from the channel
memory. Then the next channel
number will appear so that you
can continue adding or deleting
channels.
6
Press [SETUP] to exit.
ꢀ0 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Selecting the TV stereo or SAP
You can select an audio channel
to output from TV.
3
Using [K / L], select “TV Audio
Select”. Press [ENTER].
Option window will appear.
1
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
Press [SETUP].
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
TV Audio Select
VCR DVD
2
Stereo
SAP
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
5
Using [K / L], select “Required
Setting”. Press [ENTER].
Required Setting menu will
appear.
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
2
3
4
VCR DVD
Required Setting
Select Video
REC/OTR
DVD
REC/OTR
VCR
4:3 Letter Box
Stereo
TV Aspect
TV Audio Select
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
The default is set as “Stereo”.
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
4
DUBBING
AUDIO
Using [K / L], select “Stereo” or
“SAP”. Press [ENTER].
Stereo:
Outputs main audio.
SAP (Secondary Audio Program):
Outputs sub audio.
Refer to the item in “Glossary” on
page 8ꢀ for more information.
5
Press [SETUP] to exit.
Notes on TV channel audio
• If you want to record a TV program available in second audio or
stereo on a DVD-RW/R or videotape, you have to select either
Stereo or SAP in the Channel Preset screen beforehand. Refer to
the following table to check an appropriate setting.
Selected
audio
Broadcast
audio
Disc (Videotape)
recording
Audio
output
Stereo
STEREO+SAP STEREO
STEREO
STEREO
MONO
MONO
SAP
STEREO
MONO+SAP
MONO
STEREO
MONO
MONO
SAP
STEREO+SAP SAP
STEREO
MONO+SAP
MONO
STEREO
STEREO
SAP
SAP
MONO
MONO
• You can only play back the disc in second audio if a TV program is
available in second audio and you set “ TV Audio Select ” to “ SAP ”.
EN ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Setting the clock
Set the clock before you try the
Timer Programming. If Public
Broadcasting Service (PBS) is
available in your area, follow the
“Auto Clock Setting” below. If not,
follow the “Manual Clock Setting”
on page ꢀ3.
4
• If you do not know your PBS
channel number in your area:
Using [K / L], select “Auto”.
Press [ENTER].
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
6
.@/:
1
ABC
2
DEF
3
The setting will be activated.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Auto Clock Setting
1
5
2
3
4
• If you know your PBS channel
number in your area:
Using [K / L], select
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Make sure
TOP MENU MENU/LIST RETURN
• The antenna/Cable TV
connections are correct.
• If this unit is connected to a
Cable Box or Satellite Box,
select the local PBS station
on them to set the clock
automatically.
“Manual”. Press [ENTER].
VCR DVD
Auto Clock Setting - Manual
Set Channel No.
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
CH
1
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
DUBBING
AUDIO
1
Press [SETUP].
2
Using the Number buttons
or [K / L], enter your PBS
channel number with Number
buttons. Press [ENTER].
Using [K / L], select “Clock”.
Press [ENTER].
Clock menu will appear.
The setting will be activated.
3
Using [K / L], select “Auto
Clock Setting”. Press [ENTER].
Option window will appear.
• If you want to set the clock
manually and cancel the Auto
Clock Setting function: Using
[K / L], select “OFF”. Press
[ENTER].
Auto Clock Setting
VCR DVD
OFF
The Auto Clock Setting function
will be canceled.
Auto
Manual
5
Press [SETUP] to exit.
6
The default setting is “Auto”.
Press [POWER] to turn off the
unit.
This unit will search for the clock
time only when the power is off.
Leave it off for several minutes to
give this unit time to set the clock
on the display of the front panel.
Note
• The clock may set itself
automatically after you
connect the antenna/cable
signal to this unit and plug in
the power cord. In this case,
the current time will appear
on the front panel display.
• If the current time is not
displayed or the displayed
clock time is not correct, set
the clock manually.
ꢀꢀ EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Setting the clock (cont’d)
Manual Clock Setting
4
Using [K / L], enter the date
(month / day / year).
Press [{ / B] to move the cursor.
1
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
Press [SETUP].
.@/:
1
ABC
2
DEF
3
VCR DVD
Clock Setting
CH
GHI
4
JKL
5
MNO
6
2
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Using [K / L], select “Clock”.
1
7
Press [ENTER].
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
JAN/ 01 / 2006(SUN)
12: 00 AM
TOP MENU MENU/LIST RETURN
3
Using [K / L], select “Clock
Setting”. Press [ENTER].
Clock Setting menu will appear.
2
3
4
5
6
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
5
Clock Setting
VCR DVD
SKIP
CM SKIP
ZOOM
SKIP
Using [K / L], enter the time
(hour / minute). Press [{ / B].
A cursor will move on AM.
SLOW
SEARCH
DUBBING
AUDIO
---- / -- / ---- ( ---- )
-- : -- --
Clock Setting
VCR DVD
JAN/ 01 / 2006(SUN)
12: 00 AM
Press [ENTER] again.
Default date will appear.
6
Press [K / L] to select “AM” or
“PM”. Press [ENTER].
The settings will be activated.
Although seconds are not dis-
played, they begin counting from
zero.
7
Press [SETUP] to exit, if Clock
menu appears.
Note
• Your clock setting will be
lost if either there is a power
failure or this unit has been
unplugged for more than 30
seconds.
EN ꢀ3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Setting the clock (cont’d)
Setting the Daylight
Saving Time
3
Using [K / L], select “Daylight
Saving Time”. Press [ENTER].
Option window will appear.
When “Daylight Saving Time” is
“ON”, the clock will automatically
move forward one hour at ꢀ:00a.
m. on the first Sunday in April and
move back one hour at ꢀ:00a.m.
on the last Sunday in October.
“ON” is selected as a default.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
.@/:
1
ABC
2
DEF
3
Daylight Saving Time
VCR DVD
CH
GHI
4
JKL
5
MNO
6
ON
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
5
OFF
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
1
2
3
4
Press [SETUP].
REC/OTR
DVD
REC/OTR
VCR
2
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
4
Using [K / L], select “Clock”.
Press [ENTER].
SKIP
CM SKIP
ZOOM
SKIP
Using [K / L], select “ON” or
“OFF”. Press [ENTER].
SLOW
SEARCH
Clock menu will appear.
DUBBING
AUDIO
Choose “ON” if you are currently
observing the daylight saving time.
5
Press [SETUP] to exit.
Selecting the TV aspect ratio
You can select the TV aspect ratio
.@/:
1
ABC
2
DEF
3
to match the formats of what you
are playing back on the unit and
your TV screen (4:3 standard or
16:9 widescreen TV).
The default is set as “4:3 Letter
Box”.
3
CH
GHI
4
JKL
5
MNO
6
Using [K / L], select “TV
Aspect”. Press [ENTER].
Option window will appear.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
5
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
TV Aspect
DVD
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
2
3
4
1
REC/OTR
DVD
REC/OTR
VCR
Press [SETUP].
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
2
SLOW
SEARCH
Using [K / L], select “Required
Setting”. Press [ENTER].
Required Setting menu will appear.
DUBBING
AUDIO
Refer to the Note on this page.
Note
If you have a standard TV:
4
Select “4:3 Letter Box” for full
length picture with black bars
on the top and bottom of the
screen. Select “4:3 Pan &
Scan” for a full height picture
with both sides trimmed.
Using [K / L], select a desired
option. Press [ENTER].
5
Press [SETUP] to exit.
If you have a widescreen TV:
Select “16:9 Wide”.
ꢀ4 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Information on DVD recording
Information
Recording speed
This unit can record on DVD-R and DVD-RW discs.
DVD-R discs allow you to record programs only once,
and the recorded contents cannot be erased.
You can select a recording speed among 6 options,
and the recording time will depend on the recording
speed you select as follows.
* Discs recorded in SLP or SEP on this recorder
may not be played back on other DVD
recorders or DVD players.
DVD-RW discs allow you to record programs
repeatedly, and the recorded contents can be erased.
You can record programs on DVD-R discs only in
Video mode, while recording format for DVD-RW discs
can be either Video mode or VR mode.
Recording Recording
Video/Sound
Quality
Disc Size
speed
time
Logo
Attributes
XP (1H)
SP (2H)
LP (4H)
18 min
36 min
72 min
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB) (for 12cm)
8cm Disc
DVD-RW
EP (6H) 108 min
SLP (8H) 144 min
SEP (10H) 180 min
180 minutes (1.4GB) (for 8cm)
DVD-R
60 min
120 min
240 min
360 min
480 min
600 min
XP (1H)
SP (2H)
LP (4H)
EP (6H)
SLP (8H)
SEP (10H)
Recordable disc
12cm Disc
• We strongly recommend using any DVD-R 8x,
MAXELL DVD-R 16x and DVD-RW 4x disc to
assure good recording quality.
• Discs that tested and proven to be compatible with
this recorder:
VERBATIM DVD-R 8x VERBATIM DVD-RW ꢀx
• The recording time are estimates and actual
recording time may differ.
MAXELL DVD-R 16x
JVC DVD-RW 4x
• About Video mode and VR (Video Recording)
mode:
Video mode is the same recording format as
DVD-Video discs purchased locally and played
back on most DVD players.
To play back the disc on other DVD players,
you will need to finalize the disc (see page 36).
Before finalization, you can record additionally
or edit disc with this unit.
VR (Video Recording) mode is a basic
recording format for DVD-RW. You can edit,
record and delete repeatedly.
• The audio and video quality is getting poorer as
the recording time becomes longer.
• Each time [REC SPEED] is pressed, recording
speed and its allowed recording time will be
displayed.
Note
• This recorder cannot record on CD-RW or
CD-R discs.
• DVD-RW/R and CD-RW/R discs recorded on a
personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is dirt of condensation on the player’s lens.
• If you record on a disc using a personal
computer, there are cases in which it may not
be played back because of the settings of the
application software used to create the disc, even
if it is recorded in a compatible format. (Check
with the software publisher for more detailed
information.)
DVD players with
are capable of playing
DVD-RW recorded in VR mode.
Disc type Disc format Functions
Video mode Playing, limited
Video
DVD-RW
recording, limited editing
• Discs recorded in Video mode on this unit cannot
record additionally using other DVD recorders.
• A DVD-RW disc formatted with this unit cannot be
used on other DVD recorders.
• Since the recording is made by the variable bit
rate (VBR) method, the actual remaining time
for recording may be a little bit shorter than the
remaining time displayed on the OSD, depending
on the picture you are recording.
VR mode
VR
Playing, recording,
Original/Playlist editing
DVD-RW
DVD-R
DVD-RW
Playing, limited
recording, limited
editing
Video mode
DVD-R
EN ꢀ5
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Information on DVD recording (cont’d)
Restrictions on recording
Making discs playable on other DVD
player (Finalize)
You cannot record copy-protected materials using
this unit. Copy-protected material includes DVD-
Video discs and some satellite broadcasts.
If copy-protected material is encountered during
a recording, recording will be paused or stop
automatically and an error message will be
displayed on the screen.
After recording, you must finalize the disc in order to
play on other units. (Refer to page 36.)
Finalizing*
Playable
OPEN/CLOSE
A
POWER
REW
F
.
F
W
D
S
T
O
P
/
E
J
E
C
T
P
L
A
Y
DUBBING
STOP
PLAY
E
D
C
A
B
C
B
OUTPUT SELECT
-
-
-
VCR
L
CHANNEL
K
DVD
S
VIDEO
VIDEO
L
REPEAT
TRK.
DVD
VCR
s
B
DVD
B
RECORD
RECORD
Material that is “copy-once only” can only be
recorded using a DVD-RW disc in VR mode with
CPRM (see below).
This Unit
DVD player
Not Playable
When recording a TV broadcast or through an
external input, you can display copy control
information on the screen.
* You cannot finalize discs in other DVD recorders.
What is “CPRM”?
After finalizing:
• Once DVD-RW/R (Video mode) is finalized, you
cannot record additionally or edit.
• DVD-RW disc recorded with VR mode can record
additionally and edit contents even after you
finalized the disc.
• When DVD-RW/R (Video mode) is finalized, the
Title menu will be created automatically.
This is a format used to record copy-once
programs. By recording coded data on the area
of DVD discs that ordinary writing software
cannot write, it prevents copy-once programs
from being recorded repeatedly on different
media.
This unit is CPRM compatible, which means that
you can record copy-once broadcast programs,
but then you cannot make a copy of those
recordings. CPRM recordings can only be made
on DVD-RW discs formatted in VR mode, and
CPRM recordings can only be played back on
DVD players that are compatible with CPRM.
Finalize discs recorded on this unit in order to
play them back on other DVD players.
Information on copy control
Some satellite broadcasts include copy-protected
information. For their recording, refer to the following.
Copy-
prohibited
Copy
-once
Copy
-free
Disc type / format
ver.1.1,1.2
VR
DVD-RW
ver.1.1,1.2 CPRM compatible
ver.1.1,1.2
Video
DVD-RW
ver.1.1,1.2 CPRM compatible
ver.2.0
DVD-R
Recordable
Not Recordable
ꢀ6 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Formatting a disc
Choosing the recording format of a blank disc
DVD-RW
DVD-RW
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
5
When inserting a blank disc, the
unit automatically starts to initialize
the blank disc. You have to select
your desired format before insert-
ing the blank disc.
.@/:
1
ABC
2
DEF
3
Using [K / L], select “Video
mode” or “VR mode”. Press
[ENTER].
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
6
The recording format will be set.
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
6
1
Press [SETUP] to exit.
2
3
4
5
Press [SETUP].
REC/OTR
DVD
REC/OTR
VCR
7
2
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Insert a blank disc.
Formatting will start.
Using [K / L], select “Disc”.
Press [ENTER].
Disc menu will appear.
<VR mode>
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
DUBBING
AUDIO
Disc
Format
Finalize
Disc Protect OFF ON
Formatting
90%
8
Note
Formatting is completed.
“100%” will be indicated.
• The recording format setting
is effective only for DVD-RW
discs. You cannot change the
recording format for a DVD-R
disc. DVD-R discs will always
be in Video mode.
3
Using [K / L], select “Format”.
Press [ENTER].
Format menu will appear.
Format
• You cannot mix two formats
on one DVD-RW disc.
When you load a disc
once recorded before, the
recording format cannot
be changed even if you
change it in the Setup
menu.
Start
Format Mode
Video mode
• When inserting a blank
DVD+RW or DVD+R disc, the
error message (“Disc Error”)
will appear. You cannot
record on a DVD+RW/R.
On this unit, DVD+RW and
DVD+R are for playback only.
• Playlist will be created
automatically when recording
on DVD-RW in VR mode.
• In Video mode, Auto Chapter
may not show up as you
specified.
4
Using [K / L], select “Format
Mode”. Press [ENTER].
Format - Format Mode
Video mode
VR mode
Video mode
DVD Player Compatibility mode.
VR mode
Editing possibility mode.
• A blank chapter may be
created depending on the
remaining time of the disc.
“Video mode” has been selected
as the default.
EN ꢀ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Formatting a disc (cont’d)
Reformatting a disc
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
DVD-RW
DVD-RW
4
Using [K / L], select “Start”.
Press [ENTER].
.@/:
1
ABC
2
DEF
3
Video mode is the default
recording format for DVD-RW.
You can change it to VR mode
from the Setup Menu.
CH
GHI
4
JKL
5
MNO
6
Final confirmation window will appear.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Format
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Start
1
TOP MENU MENU/LIST RETURN
Format mode
Video mode
1
Press [SETUP].
Are you sure?
2
3
4
5
Yes
No
2
REC/OTR
DVD
REC/OTR
VCR
Using [K / L], select “Disc”.
Press [ENTER].
Disc menu will appear.
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
5
SLOW
SEARCH
Using [K / L], select “Yes”.
Press [ENTER].
Formatting will start.
DUBBING
AUDIO
3
Using [K / L], select “Format”.
Press [ENTER].
Format menu will appear.
Format
Start
Formatting
90%
Format Mode
Video mode
6
Note
Formatting is completed.
• When you reformat the disc,
all contents of the disc will be
erased.
100% will be indicated.
• If you want to cancel
formatting at step 5, select
“No”.
Formatting
100%
• A disc once formatted with
this unit cannot be used on
other DVD recorders.
This operation may take a while
to be completed.
Setting for Auto Chapter
Option window will appear.
DVD-RW
DVD-RW
Auto Chapter
DVD
POWER
OPEN/CLOSE
TIMER PROG.
You can set a specified time for
chapter marks.
T-SET
OFF
.@/:
1
ABC
2
DEF
3
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
CH
GHI
4
JKL
5
MNO
6
1
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Press [SETUP].
1
5
2
3
4
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
2
TOP MENU MENU/LIST RETURN
Using [K / L], select
“Recording”. Press [ENTER].
“10 minutes” has been selected as
the default.
REC/OTR
DVD
REC/OTR
VCR
3
Using [K / L], select “Auto
Chapter”. Press [ENTER].
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
4
SKIP
CM SKIP
ZOOM
SKIP
Using [K / L], select a desired
time option. Press [ENTER].
SLOW
SEARCH
DUBBING
AUDIO
5
Press [SETUP] to exit.
ꢀ8 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Basic recording
DVD-RW
DVD-RW
DVD-R
7
Follow steps below to record TV
programs.
POWER
OPEN/CLOSE
TIMER PROG.
Press [REC/OTR] (DVD) to start
recording.
T-SET
2
4
1
6
.@/:
1
ABC
2
DEF
3
“I” mark will be displayed for 5
seconds.
CH
GHI
4
JKL
5
MNO
6
1
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Press [POWER]. Press [DVD ].
Turn on the TV and be sure to
select the input to which the unit is
connected.
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
I
TOP MENU MENU/LIST RETURN
Press [PAUSE F] to resume.
Press [PAUSE F] or [REC/OTR]
(DVD) again to start recording
again.
2
REC/OTR
DVD
REC/OTR
VCR
1
5
Press [OPEN/CLOSE A].
The disc tray will open.
7
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
8
3
7
8
Press [STOP C] to stop record-
SLOW
SEARCH
Insert your disc with its label
facing up. Align the disc to the
disc tray guide.
ing.
DUBBING
AUDIO
This operation may take a
while to be completed.
disc
tray
guide
4
Press [OPEN/CLOSE A] to close
the disc tray.
This operation may take a
while to be recognized.
Note
• Recording starts immediately
after you press [REC/OTR]
(DVD) and continues until
the disc is full or you stop
recording.
5
Using [REC SPEED], select a
recording speed.
• When the clock setting has not
been made, the space for a
date and time of title names in
the Original list or Playlist will
be blank.
• When you record a TV
program broadcasted in both
Stereo and SAP-audio on a
DVD-RW/R, you have to select
the TV channel audio (Stereo
or SAP) beforehand. Only the
selected channel audio will be
recorded. Refer to “Selecting
the TV stereo or SAP” on page
ꢀ1 for more details.
XP
0:58
Refer to “Recording speed” on
page ꢀ5.
6
Using [CH K / L] or the Number
buttons, select a desired chan-
nel to record.
CH 12
• You cannot change the
recording speed during the
REC pause mode.
• You can change channels
during the REC pause mode.
EN ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
One-touch Timer Recording (OTR)
DVD-RW
DVD-RW
DVD-R
POWER
OPEN/CLOSE
TIMER PROG.
4
T-SET
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc has
enough space for the time you set.
After finishing the recording, the
recorder automatically goes into
standby.
Press [REC/OTR] (DVD) repeat-
edly to select desired recording
time.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
3
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Recording times appear on the TV
screen (30 minutes to 8 hours).
Recording will start.
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
DVD
First:
REC/OTR
DVD
REC/OTR
VCR
1
4
4
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
SKIP
CM SKIP
ZOOM
SKIP
2
SLOW
SEARCH
I
0:30
DUBBING
AUDIO
This operation may take a
while to be recognized.
0:30
(Normal Recording) 1:00
2
8:00
7:30
Using [REC SPEED], select a
recording speed.
Refer to “Recording speed” on
page ꢀ5.
When the unit reaches the
specified time, it will be turned off
automatically.
Note
• The remaining recording
time will appear on the
3
display panel during a One-
touch Timer Recording.
Press [DISPLAY] to see it
on the TV screen.
Using [CH K / L] or the Number
buttons, select a desired chan-
nel to record.
To change the recording length
during the One-touch Timer
Recording, press [REC/OTR] (DVD)
repeatedly until the desired length
appear.
• You cannot pause a One-
touch Timer Recording.
• Unlike a Timer Recording,
you can perform the following
operations during a One-
touch Timer Recording.
- Turning off the power
- Using [REC/OTR] (DVD)
and [STOP C]
To cancel the One-touch Timer
Recording within the specified
time, press [STOP C] .
This operation may take a
while to be completed.
• The unit will be turned off
automatically under the
following conditions.
1) No space remained on the
disc
2) When a power failure
occurs
• If OTR is finished in DVD
during playback or REC
mode in VCR, the DVD will
be in STOP mode and the
VCR keeps the current mode.
• When OTR is finished and
the power is turned off, the
unit will switch to the standby
mode automatically if a
Timer Recording has been
programmed. Press [T-SET]
to cancel the standby mode
for using the unit continuously.
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Timer Recording
DVD-RW
DVD-RW
DVD-R
POWER
OPEN/CLOSE
TIMER PROG.
4
T-SET
VCR
Using [K / L], enter the Start
.@/:
1
ABC
2
DEF
3
1
and End. Press [B].
You can program the unit to record
up to 8 programs within a month in
advance. Daily or weekly program
recordings are also available.
• Be sure to set the clock before
programming a timer recording.
• Insert a recordable disc or a
videotape with a record tab.
CH
GHI
4
JKL
5
MNO
6
Timer Programming
VCR DVD
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DVD
VCR
Date
1. JAN/01 12:57AM
2.
---
Start
End
--:--
CH
L1 DVD
Speed
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
5
2
3
4
5
6
7
Using [K / L], select the channel
REC/OTR
DVD
REC/OTR
VCR
number to record. Press [B].
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
1
Timer Programming
VCR DVD
SKIP
CM SKIP
ZOOM
SKIP
Press [TIMER PROG.].
DVD
VCR
Date
1. JAN/01 12:57AM 1:57AM
2.
---
Start
End
CH
8
Speed
SLOW
SEARCH
DVD
Timer Programming list will appear.
DUBBING
AUDIO
Timer Programming
VCR DVD
DVD
VCR
Date
---
Start
End
CH
Speed
To record from external input,
select L1 or L2.
1.
2.
3.
4.
---
---
---
6
2
Using [K / L], select a recording
Using [K / L], select a program
media. Press [B].
number. Press [ENTER].
Timer Programming
VCR DVD
DVD
VCR
Date
1. JAN/01 12:57AM 1:57AM
2.
---
Start
End
CH
8
Speed
3
DVD
Using [K / L], enter the Date.
Note
Press [B].
• If you have not set the
clock yet:
A clock setting window will
appear instead of the Timer
Programming list at step 1.
• To record on a videotape, select
VCR.
• To record on a disc, select DVD.
Timer Programming
VCR DVD
DVD
VCR
Date
1. JAN/01
2.
Start
--:--
End
--:--
CH
L1 DVD
Speed
---
3.
4.
---
---
7
Continue with step ꢀ in “Auto
Clock Setting” on page ꢀꢀ
or “Manual Clock Setting” on
page ꢀ3 before setting a timer
programming.
• Press [{ / B] to move the
cursor to the left and the right
on the Timer Programming list.
• After step 9, you can use the
other component (VCR or
DVD) which is not currently
programmed by turning the
power on. Note that the
Using [K / L], select a recording
When pressing [L] at the
current date, The Date will
change as follows.
speed.
Timer Programming
VCR DVD
DVD
VCR
Date
1. JAN/01 12:57AM 1:57AM
2.
---
Start
End
CH
8
Speed
1H
DVD
e.g. January 1st
JAN/01
Refer to “Recording speed” on
page ꢀ5 for DVD or page 75 for
VCR.
Daily
MON-SAT
MON-FRI
SAT
programmed device will
start to capture the selected
channel ꢀ minutes before the
start time and at the moment,
if the other device still stays in
recording, recording pause or
OTR mode turning a different
channel, the current mode will
be canceled and you cannot
change the channel. When
both devices capture the same
channel, the current mode
continues to function.
FRI
SUN
JAN/31
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Timer Recording (cont’d)
8
9
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
Press [ENTER] when
information is entered.
Your program setting will be stored.
• To set another program, repeat
steps ꢀ to 8.
Press [T-SET] to set a Timer
Programming.
.@/:
1
ABC
2
DEF
3
9
CH
GHI
4
JKL
5
MNO
6
will appear on the front panel
display.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
• To exit, press [TIMER PROG.]
or [SETUP].
DVD
TOP MENU MENU/LIST RETURN
• When programs are overlapped,
“Overlap” and the overlapped
program numbers will appear on
the TV screen.
8
• “VCR” will appear if VCR Timer
Recording have been set.
POWER
OPEN/CLOSE
T-SET
TIMER PROG.
.@/:
1
ABC
2
DEF
3
Checking, canceling, or correcting the timer programming
information
2
5
1
6
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
1
4
To clear the timer programming:
Using [K / L], select your pro-
gram. Press [CLEAR].
TOP MENU MENU/LIST RETURN
Press [T-SET].
disappears from the front
panel display.
4
To correct the timer program-
ming:
Using [K / L], select the pro-
gram. Press [ENTER].
Next, correct the timer programming
using [K / L / { / B].
Finally, press [ENTER] again.
2
Note
Press [TIMER PROG.].
• Press [TIMER PROG.] to check
the timer programming in
waiting.
- When the Timer Recording is in
progress, that program will be
highlighted in red.
- While using the side of the
unit that is free from Timer
Recording (either DVD or VCR)
during timer standby mode, no
programs will be highlighted
even if you press [TIMER
PROG.] to confirm the program
information. In this case, you
cannot select other program
either for correction or add any
new programs.
Timer Programming list will appear.
Timer Programming
VCR DVD
DVD
VCR
Date
1. JAN/01 12:57AM 1:57AM
2.
---
Start
End
CH
8
Speed
1H
DVD
5
Press [TIMER PROG.] to exit.
3
Check the information on the
list you will need.
6
Press [T-SET] to return to the
timer standby mode.
To stop the Timer Recording in process
Press [STOP C] to stop the disc recording or [STOP C / EJECT A]
to stop the videotape recording on the front panel of the main unit.
[STOP C] on the remote control is not effective.
• The unit will be turned on
automatically before the
recording time.
If the timer program did not complete correctly, the error number
appears in the Timer Programming list.
Each error number means:
Timer Programming
Date Start
VCR DVD
DVD
VCR
E1-ꢀꢀ
Recording error other than
E35
PCA full
End
CH
8
Speed
DVD E22
E37-39 below
JAN/01 12:57AM 1:57AM
*
E36
Already finalized Video
format disc
2.
---
---
---
---
---
---
---
Eꢀ3-ꢀ4 Unrecordable disc
Eꢀ5-ꢀ8 Copy prohibited program
3.
4.
5.
6.
7.
8.
E40
Some portion has not
been recorded because
of program overlapping.
Recording did not start at
the start time.
Eꢀ9
E30
Disc protected
Disc full
E31-3ꢀ Already 99 titles recorded
Press [CLEAR] to erase the
selected program.
E33
Already 999 chapters
recorded
E41
E4ꢀ
Power failed
E34
No space for Control
information
No disc when recording
• A program with the error number is grayed out and asterisked on the Timer Programming list.
• Once the Timer Programming list with error indication is displayed, the program line(s) with error will be
cleared only after the programs are canceled and reset to the timer standby mode.
3ꢀ EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Timer Recording (cont’d)
Hints for Timer Recording
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer
settings will be lost.
• If a recordable disc is not on the tray or an unrecordable disc is on the tray, the DVD indicator on the front panel
flashes and Timer recording cannot be performed. In some cases, the DVD indicator appears momentarily around the
Timer starting time as the unit attempts to record. Please insert a recordable disc.
• If a videotape with a record tab is not in the cassette compartment or there is no videotape in the compartment,
the VCR indicator on the front panel flashes and timer recording cannot be performed. Please insert a recordable
videotape.
• If you press [POWER] and turn on the unit while either DVD or VCR is in timer standby mode,
disappears. In this
case, you cannot change the mode between DVD and VCR. You cannot change any settings using [SETUP] or edit
discs.
• After step 9 on page 3ꢀ, you can turn on the power to use the side of the unit that is free from Timer Recording (either
DVD or VCR) for another recording by pressing [POWER] during timer standby. During Timer Recording, press
[OUTPUT SELECT] on the front panel, or [DVD ] or [VCR ] on the remote control. Note that you cannot change
channels after Timer Recording started. You can use all recording/recording pause/OTR functions. However, the unit
will begin receiving channel signals for Timer Recording ꢀ minutes before the programmed starting time. Unless the
program that you are currently recording using the Timer Recording free side of the unit is on the same channel with
the one programmed for Timer Recording, the unit prioritizes Timer Recording and the current recording will be
automatically stopped. If the channels set for Timer recording and the current recording are same, the current
recording will continue without interruption.
• If both DVD and VCR are timer programmed, you cannot use any functions for either unit during timer standby or Timer
Recording. If you want to use functions other than recording under such condition, cancel Timer Recording by pressing
[T-SET] during timer standby or stop recording by pressing [STOP] on the front panel during Timer Recording.
• When the starting and ending time are same, the recording will be set for ꢀ4 hours. When the disc reaches the end
during the recording, the unit turns itself off. If you want to continue the recording, cancel timer standby by pressing
[T-SET], insert a new disc, and then press [T-SET] again. If you are recording on a tape, the unit automatically ejects
the tape when it reaches the end. You can continue the recording by inserting a new tape.
• When the programmed starting and ending time are earlier than the current time, the setting will not be accepted and
be cleared for redoing.
• If the starting time is earlier and the ending time is later than the current time, the recording will start right after you
press [T-SET].
• The Timer Recording cannot be performed in DVD and VCR at the same time. If you set two programming with the
same channel and time in both units, the program with a lower program number will be recorded.
The priority of overlapped settings
This unit prioritize recording as follows if the timer programmings are overlapped.
A Timer Recording of lower priority will be canceled, start from the middle or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
A programming with a lower program number has priority
When some programming have been made around the end
time of the program currently being recorded:
When the starting time is same:
A program with a lower program number (PROG. 1) has priority.
A program with a lower program number (PROG. 2) has priority.
PROG. 1
PROG. 2
PROG. 1
PROG. 2
PROG. 3
Actual
recording
Actual
recording
PROG. 1
PROG. 2
PROG. 1
PROG. 2
The first 30 seconds (at the longest) will be cut off.
The first 30 seconds (at the longest) will be cut off.
When the recording time is entirely overlapped:
PROG.1 will not be recorded at all.
When the recording time is partially overlapped:
PROG. 1 will start after PROG. 2 recording is completed.
PROG. 1
PROG. 1
PROG. 2
Actual
recording
PROG. 2
Actual
recording
PROG. 2
PROG. 2
PROG. 1
The first 30 seconds (at the longest) will be cut off.
Note for DVD recording
When the End time of the programming currently being recorded
and the Start time of the subsequent program are same:
If PROG. 1 is recorded on a DVD, the beginning of the PROG. 2 may be
cut off. The amount of time cut off differs depending on the recording media.
For example, if both PROG. 1 and PROG. 2 are recorded on DVD, the first 30
seconds (at the longest) of PROG. 2 will be cut off.
• When the recording time of two
programs are overlapped, or the End
time of a program and the Start time
of another are the same, the first
30 seconds (at the longest) of the
subsequent program will be cut off.
• If the cut-off portion reaches one
minute or more, this program will be
displayed with error number E40 on
the timer programming list.
PROG. 1
PROG. 2
Actual
PROG. 1
PROG. 2
recording
The first 30 seconds (at the longest) will be cut off.
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Settings for an external source
Connection to an external source
DVD-RW
DVD-RW
DVD-R
VCR
Connect the external source properly to the unit by using input jacks either LINEꢀ (Front) or LINE1 (Rear).
When connecting an external equipment of monaural output to this unit, use AUDIO L jack of LINE 1 (Rear) or
LINE ꢀ (Front).
Use commercially available S-Video or Video cable and an Audio cable for this type of connection.
OUTPUT
VIDEO AUDIO
OUTPUT
VIDEO AUDIO
Another source
S- VIDEO
S- VIDEO
(VCR camcorder etc.)
L
R
L
R
or
or
Video
cable
S-Video
Video
cable
Audio
cable
S-Video
cable
Audio
cable
cable
DVD/VCR
or
IN
IN
-
-
AUDIO
-
OUT
DVD/CR
S-VIDEO
L
-
S VIDEO
VIDEO
L AUDIO R
- -
R
IN
VIDEO
-
OUT
To LINE 2 IN
To LINE 1 IN
OPEN/CLOSE
A
DVD
AUDIO S-VIDEO
DVD/VCR
COMPONENT
VIDEO OUT
DII
S-VIDEO
IN
-
AUDIO
-
OUT
ANTENNA
IN
AUDIO O
OUT
POWER
REW
F
.FWD STOP/EJECT PLA
Y
DUBBING
STOP
PLAY
Y
L
L
E
D
C
A
B
C
B
PB
L
R
R
OUTPUT SELECT
/CB
VCR
L
K
DVD
S
-
VIDEO
VIDEO
L
-
AUDIO
-
R
OUT
IN
CHANNEL
COAXIAL
IN
-
VIDEO
-
OUT
VCR
s
B
DVD
RECORD
RECORD
PR
R
/CR
OUT
Rear of this unit
Front of this unit
1.Press [SETUP].
2.Using [K / L], select “Required Setting” and then “Select Video”. Press
[ENTER].
VCR DVD
Select Video
(
)
L1 Rear
Video In
Video In
(
)
L2 Front
3.Using [K / L], select “L2 (Front)”. Press [ENTER]. 3.Using [K / L], select “L1 (Rear)”. Press [ENTER].
(
)
(
)
Select Video - L2 Front
VCR DVD
Select Video - L1 Rear
VCR DVD
Video In
Video In
S-Video In
S-Video In
4.Using [K / L], select the input jack type to
connect. Press [ENTER].
4.Using [K / L], select the input jack type to
connect. Press [ENTER].
If you want to use S-VIDEO input jack, select
If you want to use S-VIDEO IN jack, select
“S-Video In”.
“S-Video In”.
If you want to use VIDEO input (Composite) jack,
select “Video In”.
If you want to use VIDEO IN (Composite) jack,
select “Video In”.
VCR DVD
VCR DVD
Select Video
Select Video
L1 (Rear)
S-Video In
Video In
L1 (Rear)
Video In
S-Video In
L2 (Front)
L2 (Front)
5.Press [SETUP] to exit.
5.Press [SETUP] to exit.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Settings for an external source (cont’d)
Recording from an external source
DVD-RW
DVD-RW
DVD-R
VCR
Before recording from an external source, see the instructions for the connection on page 34.
1.Turn on the TV and this unit and be sure to select the input of
the TV to which the unit is connected.
Refer to the table on page 15.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
DVD
2.When you want to record to the disc: Press:
.@/:
1
ABC
2
DEF
3
Press [OPEN/CLOSE A] to open the disc tray. Place the disc to
CH
GHI
4
JKL
5
MNO
6
4
record properly.
3.Press [OPEN/CLOSE A] to close the disc tray.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
This operation may take a while to be recognized.
TOP MENU MENU/LIST RETURN
VCR
When you want to record to a videotape: Press:
Insert the videotape with a record tab into the cassette
compartment.
REC/OTR
DVD
REC/OTR
SKIP
4.Select the input of the unit which the external equipment is
connected. (L2 or L1)
• To use the input jacks on the back of this unit, select “L1” position by
pressing [0], [0], [1] on the remote control or [CHANNEL L / K].
• To use the input jacks on the front of this unit, select “Lꢀ” position by
pressing [0], [0], [2] on the remote control or [CHANNEL L / K].
VCR
SKIP
PLAY
REC SPEED
x1.3/0.8
PAUSE
5
5.Select a recording speed by pressing [REC SPEED].
Refer to “Recording speed” on page ꢀ5 for DVD or page 75 for VCR.
6.Press [VCR/DVD RECORD] on the unit to start recording.
7.Press “Play” on the external source to record from.
6
2 3 6
OPEN/CLOSE
A
8.For disc:
F.FWD STOP/EJECT PLA
Y
DUBBING
STOP
PLA
Y
D
C
A
B
C
B
Press [STOP C] on the unit to stop recording.
OUTPUT SELECT
S
-
VIDEO
VIDEO
VCR
L
K
DVD
CHANNEL
VCR
s
B
DVD
RECORD
RECORD
This operation may take a while to be completed.
For videotape:
8
1
4 8
Press [STOP C / EJECT A]on the unit to stop recording.
Setting a disc to protect
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
DVD-RW
TOP MENU MENU/LIST RETURN
2
3
4
3
To prevent accidental recording,
editing or erasing of the titles, you
can protect them from the Setup
menu.
Using [K / L], select “Disc
Protect OFF
[ENTER].
ON”. Press
Confirmation window will appear.
Note
• The Disc Protect setting is
1
Disc Protect OFF ON
available only for a DVD-RW
disc recorded in VR mode.
• You can select only Disc
Protect OFF when a
protected disc is inserted.
To cancel the disc protect:
• When you insert a disc
protected in this unit, “Disc
Protect ON → OFF” will
appear.
Press [SETUP].
Yes
No
2
Using [K / L], select “Disc”.
Press [ENTER].
Disc menu will appear.
4
Using [K / L], select “Yes”.
Press [ENTER].
A disc will be protected.
Disc Protect ON OFF
Yes
No
To cancel the protection
setting for the disc, select
“Disc Protect ON → OFF” at
step 3, then select “Yes”.
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Finalizing the discs
DVD-RW
DVD-RW
DVD-R
4
You will need to finalize discs
recorded in Video mode to play
them back on other DVD players.
Finalizing may take several
minutes up to an hour. (It can
take up to 15 minutes for a disc
recorded in Video mode and 60
minutes for a disc recorded in VR
mode.)
Using [K / L], select “Yes”.
Press [ENTER].
Finalizing will start.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
1
Finalizing
90%
TOP MENU MENU/LIST RETURN
2
3
4
A shorter recording period on
the disc will require a longer time
period for finalization. Do not
unplug the power cord during
finalization.
To cancel finalizing...
(DVD-RW only)
• To cancel finalizing at step
4, press [STOP C], select
“Yes” with [{ / B], then press
[ENTER]. Finalizing is canceled
and the unit will be in stop mode.
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
Details are on pages ꢀ5-ꢀ6.
SLOW
SEARCH
DUBBING
AUDIO
4
1
Press [SETUP].
Do you want to cancel ?
Yes
No
2
Using [K / L], select “Disc”.
Press [ENTER].
Disc menu will appear.
Finalizing
5%
3
• If
appears when pressing
Using [K / L], select “Finalize”.
Press [ENTER].
[STOP C], you cannot cancel
finalizing because the finalizing
has been in certain progress.
• When selecting “No” and press
Note
Confirmation window will appear.
• Finalizing discs in Video
Finalize
mode automatically creates
title menus.
[ENTER] or [RETURN
] ,
Yes
No
finalizing will be continued.
• You cannot cancel finalizing the
DVD-R disc once it has started.
• Once you have finalized a
disc recorded in Video mode,
you cannot edit or record
anything else on that disc.
Discs recorded in VR mode
can still be recorded and
edited on this unit even after
finalization.
• When you insert a DVD-RW
disc finalized with this unit,
“Undo Finalize” will appear
instead of “Finalize”.
This operation may take a
while to be completed.
5
Finalizing is completed.
Disc
Format
Undo Finalize
Disc Protect OFF ON
Finalizing
100%
To reverse the finalization
of the disc, select “Undo
Finalize” at step 3.
• DO NOT power off during
finalization. This will result in
malfunction.
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Finalizing the discs (cont’d)
Auto finalize
DVD-RW
DVD-R
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
4
You can finalize discs
Using [K / L], select “Disc Full”
or “End of Timer Rec”. Press
[ENTER].
.@/:
1
ABC
2
DEF
3
automatically using Auto
Finalize function. This function
automatically finalizes discs
after all Timer Recordings are
completed and when the disc
space runs out.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
6
Option window will appear.
<Example: Disc Full>
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
Auto Finalize - Disc Full
DVD
ON
2
3
4
5
OFF
1
REC/OTR
DVD
REC/OTR
VCR
Press [SETUP].
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
2
SLOW
SEARCH
Using [K / L], select
“Recording”. Press [ENTER].
Recording menu will appear.
DUBBING
AUDIO
<Example: End of Timer Rec>
DVD
Auto Finalize - End of Timer Rec
3
ON
OFF
Using [K / L], select “Auto
Finalize”. Press [ENTER].
Auto Finalize menu will appear.
DVD
Auto Finalize
Disc Full
End of Timer Rec
OFF
OFF
5
Using [K / L], select “ON”.
Press [ENTER].
Your setting will be activated.
6
Press [SETUP] to exit.
Note
• Auto Finalize function is not
available for discs recorded in
VR mode.
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Dubbing Mode
DVD-RW
DVD-RW
DVD-R
3
Using [K / L], select “Dubbing
Mode”. Press [ENTER].
Option window will appear.
VCR
You can copy a DVD disc to a
videotape or copy a videotape
to a DVD disc. This function
will be possible only if the DVD
disc or the videotape is not copy
protected.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
Dubbing Mode
VCR DVD
.@/:
1
ABC
2
DEF
3
VCR DVD
DVD VCR
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Before starting this function, prepare
for the recording on the DVD-RW/
R disc or the videotape. Refer to
pages ꢀ9 and 75.
1
2
3
TOP MENU MENU/LIST RETURN
REC/OTR
DVD
REC/OTR
VCR
Make sure:
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
• Insert a recordable disc and a
videotape with a record tab.
Note for recording to a videotape:
• The videotape's record tab is
intact.
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
DUBBING
AUDIO
• The remaining time of the
videotape is long enough.
Note for recording to a disc:
• Make sure that the disc is
recordable. Refer to pages ꢀ5
and ꢀ6.
1
Press [SETUP].
2
Using [K / L], select
“Recording”. Press [ENTER].
Recording menu will appear.
DVD
10 minutes
Recording
Auto Chapter
Auto Finalize
Dubbing Mode
VCR DVD
Note
For VCR to DVD duplication:
• After starting VCR to DVD
duplication, the picture may be
distorted because of the auto
tracking function.
This is not a malfunction.
Be advised to playback the
videotape until the picture is
stabilized, then set the starting
point which you wish to start
recording, and start VCR to
DVD duplication.
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Dubbing Mode (cont’d)
VCR to DVD
DVD to VCR
4
4
POWER
OPEN/CLOSE
TIMER PROG.
Using [K / L], select
“VCR DVD”. Press [ENTER].
Using [K / L], select
“DVD VCR”. Press [ENTER].
T-SET
.@/:
1
ABC
2
DEF
3
Dubbing Mode
VCR DVD
Dubbing Mode
VCR DVD
CH
GHI
4
JKL
5
MNO
6
VCR DVD
DVD VCR
VCR DVD
DVD VCR
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
5
4
TOP MENU MENU/LIST RETURN
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
5
7
SKIP
CM SKIP
ZOOM
SKIP
5
6
8
5
Press [SETUP] to exit.
Press [SETUP] to exit.
Press:
SLOW
SEARCH
VCR
Press:
DVD
DUBBING
AUDIO
Make sure to select a recording
speed using [REC SPEED].
Make sure to select a recording
speed using [REC SPEED].
Press:
VCR
Press:
DVD
6
6
Press [PLAY B]. Then press
[PAUSE F] at the point you
wish to start recording.
• Since it takes about a few
seconds before the actual
dubbing begins, please
allow extra 5 seconds when
selecting the starting point.
Press [PLAY B]. Then press
[PAUSE F] at the point you
wish to start recording.
Note
7
• When you turn off the unit
after setting the Dubbing
Press [DUBBING].
DVD to VCR duplication will start.
Mode to DVD
VCR, the
setting will be set to
8
VCR
DVD automatically.
7
Press [STOP C] to stop the
recording.
• Dubbing Mode is available
only if the videotape or disc is
not copy protected.
Press [DUBBING].
VCR to DVD duplication will start.
• You cannot change the output
mode during VCR to DVD or
DVD to VCR duplication.
For Audio CD to VCR
8
Press [STOP C] to stop the
recording.
duplication:
• This function is available on
Audio CDs.
For VCR to DVD duplication:
• The playback sound mode
is followed by the setting of
VCR playback sound mode
on page 77. Set the playback
sound mode to which you
wish to record to the DVD.
• This unit will automatically
stop the duplication if
playback with no image is for
more than 3 minutes during
VCR to DVD duplication.
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Information on DVD playback
Before you play DVD discs, read the following information.
Playable discs
Color systems
This unit is compatible with the following discs.
To play back a DVD, make sure that it meets the
requirements for Region Codes and Color Systems
as described below. Discs with the following logos
can be played back on the unit. Other Disc types are
not guaranteed to be played back.
DVDs are recorded in different color systems
throughout the world. The most common color
system is NTSC (which are used primarily in the
United States and Canada).
This unit uses NTSC, you must use DVDs recorded
in the NTSC system. You cannot play back DVDs
recorded in other color systems.
Disc
Logo
Region codes
DVD-VIDEO
This unit has been designed to play back DVD discs
with Region One (1). DVDs must be labeled for ALL
regions or for Region 1. You cannot play back DVDs
labeled for other regions. Look for the symbols below
on your DVDs. If these region symbols are not on
your DVD, you cannot play back the DVD on this
unit.
DVD-RW (VIDEO/VR mode)
DVD-R (VIDEO mode)
CD-DA (AUDIO CD)
CD-RW (CD-DA FORMAT)
The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only be
played back on the unit with the same region code.
CD-R (CD-DA FORMAT)
Hint for DVD playback
The contents of DVD disc are generally divided into
titles. Titles may be further subdivided into chapters.
is a trademark of DVD Format/Logo Licensing Corporation.
Start Rec.
Title 1
Stop/Start
Stop Rec.
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Basic playback
Playback
DVD-RW
1
DVD-RW
DVD-R
<VR mode>
Original
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
Press [POWER]. Press [DVD ].
Turn on the TV and be sure to
select the input to which the unit is
connected.
1
2
4
8
.@/:
1
ABC
2
DEF
3
1
2
5
3
6
CH
GHI
4
JKL
5
MNO
6
JAN/ 1/06 1:00AM CH12 XP
4
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
2
5
1
6
7
Press [OPEN/CLOSE A].
The disc tray will open.
[MENU / LIST]
REC/OTR
DVD
REC/OTR
VCR
Playlist
3
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Insert your disc with its label fac-
ing up. Align the disc to the disc
tray guide.
1
2
3
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
JAN/ 1/06 1:00AM CH12 XP
4
DUBBING
AUDIO
5
6
5
8
To exit the title menu, press
[STOP C] or [RETURN ].
disc
tray
guide
6
Using [K / L / { / B], select a
desired title. Press [ENTER].
Option window will appear.
<Video mode>
4
Press [OPEN/CLOSE A] to close
the disc tray.
This operation may take a
while to be recognized.
Title List
Note
2
5
3
6
• For DVD-R (Video mode) and
DVD-RW (Video mode) discs
which are already finalized,
a title list will be displayed
instead of thumbnails.
Play
Edit
5
JAN/ 1/06 1:00AM CH12 XP
4
Press [TOP MENU] to display
the Title menu.
You can change “Original” or
“Playlist” of VR mode using
[MENU / LIST].
Title Menu
1
2
3
4
5
JAN/22/06 12:55AM CH10 XP
JAN/30/06 11:00PM CH8 XP
FEB/10/06 9:00PM CH10 LP
FEB/28/06 11:00AM CH6 LP
FEB/28/06 10:00PM CH8 EP
<Video mode>
7
Using [K / L], select “Play”.
Press [ENTER].
Playback will start.
Title List
1
2
5
3
6
JAN/ 1/06 1:00AM CH12 XP
4
8
Press [STOP C] to stop play-
back.
• You can resume playback
from the point you stopped
playback. (Resume playback)
Refer to page 44 for details
about resume playback.
To eject the disc, press [OPEN/
CLOSE A] to open the disc tray,
then remove the disc before
turning the unit off.
• Some discs may start
playback automatically.
• You can also start playback
by pressing [PLAY B] in
stead of [ENTER] at step 6.
EN 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Basic playback (cont’d)
DVD-V
CD
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
4
1
Press [PLAY B] to start play-
back.
2
.@/:
1
ABC
2
DEF
3
1
Press [POWER]. Press [DVD ].
Turn on the TV and be sure to
select the input to which the unit is
connected.
CH
GHI
4
JKL
5
MNO
6
Playback will start.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
If you are playing back a DVD-Video
disc, a menu may appear.
Refer to page 43 for details about
the Disc menu.
TOP MENU MENU/LIST RETURN
2
Press [OPEN/CLOSE A] to open
the disc tray.
The disc tray will open.
REC/OTR
DVD
REC/OTR
VCR
5
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Press [STOP C] to stop play-
SKIP
CM SKIP
ZOOM
SKIP
4
5
back.
3
SLOW
SEARCH
Insert your disc with its label fac-
ing up. Align the disc to the disc
tray guide.
DUBBING
AUDIO
Note
• Some discs may start
playback automatically.
Playing discs using the Disc menu
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
DVD-V
2
.@/:
1
ABC
2
DEF
3
Using [K / L / { / B], select an
2
A DVD disc contains a Disc
menu that describes the contents
or allows you to customize the
playback. For example, the menu
may offer choices for subtitle
languages, special features, or
chapter selection.
Some discs display them
automatically when you start
playback. For others, they only
appear when you press
CH
GHI
4
JKL
5
MNO
6
item. Press [ENTER] to confirm.
Continue this step to set up all
the features you want or to start
playing the disc from the menu.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
MENU / LIST button:
Displays a DVD Disc menu. It may
be the same with the ‘Title menu.’
1
2
3
2
REC/OTR
DVD
REC/OTR
VCR
Cursor K / L / { / B buttons:
Moves the cursor on the screen.
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
ENTER button:
Selects the currently highlighted
menu option.
SKIP
CM SKIP
ZOOM
SKIP
[MENU / LIST].
SLOW
SEARCH
DVD
First:
DUBBING
AUDIO
Number buttons:
Selects a numbered menu option
(some discs only). (Press [ENTER]
after.)
1
Press [MENU / LIST].
The Disc menu will appear.
If the feature is not available,
may appear on the TV screen.
Note
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
3
Press [MENU / LIST] to exit the
Disc menu.
4ꢀ EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Basic playback (cont’d)
Playing back discs using the Title menu
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
DVD-V
.@/:
1
ABC
2
DEF
3
TOP MENU button:
Displays the ‘Title menu’ of a DVD
disc.
Some DVDs have a Title menu,
which lists the titles available on
them. It helps you to start playback
at a specific title.
2
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Cursor K / L / { / B buttons:
Moves the cursor on the screen.
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
DVD
First:
ENTER button:
1
2
3
Selects the currently highlighted
menu option.
2
1
Number buttons:
REC/OTR
REC SPEED
DVD
REC/OTR
VCR
Press [TOP MENU].
The Title menu will appear.
If the feature is not available,
may appear on the TV screen.
Selects a numbered menu option
(some discs only). (Press [ENTER]
after.)
PLAY
Note
• [TOP MENU] will not always
be active with all DVDs.
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
3
2
Press [TOP MENU] to exit the
Title menu.
Using [K / L / { / B], select a
title to play. Press [ENTER].
Playback will begin at the title you
selected.
Pause
REC/OTR
DVD
REC/OTR
VCR
Play will pause and sound will be
muted.
DVD-RW
DVD-V
DVD-RW
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
SKIP
2
DVD-R
CD
F
SLOW
CM SKIP
SEARCH
1
1
During playback, press
Note
2
[PAUSE F].
• On DVDs, set “Still Mode” to
“Field” in the Setup menu
if pictures in the pause mode
are blurred.
Press [PLAY B] to resume play.
(Refer to page 73.)
EN 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Special playback
Resume playback
DVD-RW
DVD-V
DVD-RW
2
REC/OTR
DVD
REC/OTR
VCR
Press [PLAY B].
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
DVD-R
CD
Within a few seconds, playback
will resume from the point at which
it stopped last. You can resume
playback at the same point even if
you turn off the unit.
SKIP
CM SKIP
ZOOM
SKIP
2
1
2
You can resume playback from
where you stopped it last time.
SLOW
SEARCH
DUBBING
AUDIO
1
During playback, press [STOP C].
The resume message will appear.
To cancel resuming and start disc
playback from the beginning, press
[STOP C] again while the play is
stopped.
Resume ON
Fast forward / Fast reverse
DVD-RW
DVD-V
DVD-RW
DVD-R
CD
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
1
1
SKIP
CM SKIP
ZOOM
SKIP
During playback, press [D] or [E].
SLOW
SEARCH
Every time you press [D] or [E], approximate speed will be changed
as follows.
DUBBING
AUDIO
Fast forward or fast reverse playback across titles (for DVD discs) are not
possible.
Note
• Forward/reverse speed will
FWD
FWD
FWD
FWD
FWD
FWD
be indicated with icons as
g
g
g
g
g
g
Normal
speed
follows.
REV
REV
REV
REV
REV
REV
x40
x20
x5
x2
x20
x40
Forward (Approx. Speed)
g playback
g
g
g
g
g
xꢀ:
xꢀ0:
x40:
For Audio CDs, approximate speed is fixed at x8 with sound.
To return to the normal play, press [PLAY B].
Reverse (Approx. Speed)
x5:
xꢀ0:
x40:
Skipping TV commercials during playback
DVD-RW
DVD-V
DVD-RW
DVD-R
You can skip TV commercials by pressing [CM SKIP], in order to enjoy
the recorded programs without interruption.
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
1
SKIP
CM SKIP
ZOOM
SKIP
During playback, press [CM SKIP].
Normal play will start at 30 seconds ahead from the point you press
[CM SKIP].
SLOW
SEARCH
DUBBING
AUDIO
1
Every time you press [CM SKIP], the playback starting point will be
extended by 30 seconds ahead.
You can press up to 6 times (180 seconds).
(forwarding 30 seconds)
e.g. Press [CM SKIP] once.
B
CM Skip 30 sec.
Playback will restart automatically.
44 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Special playback (cont’d)
Rapid Play
B
B
B
:
:
:
Press [Bx1.3/0.8] once
during playback.
Plays back approximately
at 0.8 times of normal
playback.
DVD-RW
DVD-V
DVD-RW
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
DVD-R
SKIP
CM SKIP
ZOOM
SKIP
2
Rapid Play function is available
only during playback.
1
SLOW
SEARCH
Available only on discs recorded
in the Dolby Digital format, Rapid
Play plays back in a slightly
faster/slower speed while keeping
the sound quality just as normal
playback.
Press [Bx1.3/0.8] twice
during playback.
Plays back approximately
at 1.3 times of normal
playback.
DUBBING
AUDIO
Press [Bx1.3/0.8] three
times to play back in
normal speed.
1
During playback, press
No effects.
Note
[Bx1.3/0.8].
• Audio (language) setting
cannot be changed while
using this mode.
• This feature may not work at
some point in a disc.
• Audio is PCM during Rapid
Play mode.
2
Press [PLAY B] to continue the
normal playback.
Step by step playback
DVD-RW
DVD-V
DVD-RW
To play step by step backward:
Press [SKIP H] repeatedly.
Every time you press the button,
the play will go backward by one
frame.
DVD-R
REC/OTR
DVD
REC/OTR
VCR
1
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
During playback, press [PAUSE F].
Playback will be paused and
sound will be muted.
SKIP
CM SKIP
ZOOM
SKIP
1
• Press and hold
[SKIP H / G] to reverse/
advance continuously.
3
SLOW
SEARCH
2
DUBBING
AUDIO
F
3
Press [PLAY B] to resume play.
2
Press [SKIP G] repeatedly.
The playback will advance one
frame (or step) at a time when you
press [SKIP G]. The sound will
be muted.
Slow forward / Slow reverse play
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
DVD-RW
DVD-V
DVD-RW
DVD-R
1
SKIP
SKIP
SLOW
CM SKIP
SEARCH
1
During playback, press [PAUSE k]. Press [D] or [E].
Every time you press [D] or [E], approximate speed will change as
follows. (The sound will remain muted.)
Note
• Slow forward/slow reverse
speed will be indicated with
FWD
FWD
FWD
FWD
FWD
FWD
icons as follows.
g
g
g
g
g
g
Forward (Approx. Speed)
Pause
REV
REV
REV
REV
REV
REV
x1/4
x1/8
x1/16
x1/16
x1/8
x1/3
x1/16:
g
g
g
g
g
g
x1/8:
x1/3:
Reverse (Approx. Speed)
To return to the normal play, press [PLAY B].
x1/16:
x1/8:
x1/4:
EN 45
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-RW
Playing discs
Special playback (cont’d)
Zoom
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
DVD-V
DVD-RW
2
DVD-R
Using [K / L], select a desired
zoom factor to zoom. Press
[ENTER].
2
3
REC/OTR
DVD
REC/OTR
VCR
1
During playback, press [ZOOM].
The zoom area will be displayed.
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Zoom menu will appear.
SKIP
CM SKIP
ZOOM
SKIP
1
1
0:00:00
DVD-Video
SLOW
SEARCH
DUBBING
AUDIO
1.2
1.5
2.0
1
Note
• When selecting a smaller
factor than the current one,
the zoom area will not be
displayed.
• To exit the zoom menu, press
[ZOOM] again at step 1.
• To cancel the zoom function,
select “x1.0” using [K / L],
then press [ENTER].
3
There are four options
Using [K / L / { / B], select a
desired zoom position. Press
[ENTER].
(x1.0, x1.ꢀ, x1.5 and xꢀ.0), these
are displayed excluding the current
zoom rate.
The zoom play will start.
POWER
OPEN/CLOSE
TIMER PROG.
Marker Setup
T-SET
.@/:
1
ABC
2
DEF
3
<Audio CD>
DVD-RW
DVD-V
DVD-RW
CH
GHI
4
JKL
5
MNO
6
1
0:00:00
Audio CD
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DVD-R
CD
1
2
3
4
5
6
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
This feature allows you to assign a
specific point on a disc to be called
back later.
1
TOP MENU MENU/LIST RETURN
2
3
4
1
3
REC/OTR
DVD
REC/OTR
VCR
During playback, press
[DISPLAY].
Using [K / L], select a desired
marker number. When it reach-
es the desired point, press
[ENTER].
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
The display menu will appear.
SLOW
SEARCH
1
1
0:00:00
DVD-Video
DUBBING
AUDIO
The title (track) number and the
time will be displayed.
Note
4
2
[ENTER].
• To clear a marker, select the
marker number to be cleared,
then press [CLEAR].
To return to the marker later:
Using [K / L], select the desired
marker number. Press [ENTER].
Using [{ / B], select
. Press
• All markers will be erased
when you operate these
operations listed below.
– Opening the disc tray
– Turning off the power
– Recording to a recordable
disc
– Changing the mode between
Original and Playlist (VR
mode)
Marker Setup menu will appear.
<DVD-Video>
1
1
0:00:00
DVD-Video
1
2
3
4
5
6
• You can mark up to 6 points.
46 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Search
Title / Chapter search
DVD-RW
DVD-V
DVD-RW
DVD-R
Using [SKIP H / G]
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
1
SKIP
CM SKIP
ZOOM
SKIP
During playback, press [SKIP G] to skip the current title or chapter
and move to the next.
SLOW
SEARCH
1
DUBBING
AUDIO
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title will be skipped.
To go back to the beginning of the current title or chapter, press
[SKIP H].
Press it repeatedly to go to the previous title or chapters.
Using [DISPLAY]
1
During playback, press [DISPLAY].
The Display menu will appear.
POWER
OPEN/CLOSE
T-SET
TIMER PROG.
.@/:
1
ABC
2
DEF
3
1
1
0:00:00
DVD-Video
2
1
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
2
2
REC/OTR
DVD
REC/OTR
Using [{ / B], select
. Press [ENTER].
will be highlighted.
VCR
The title number next to
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
Title:
SLOW
SEARCH
Using [K / L] or the Number buttons, enter a desired title number
DUBBING
AUDIO
to search. Press [ENTER].
Title search will start.
Chapter:
Press [B] to move to the number next to
for chapter.
Using [K / L] or the Number buttons, enter a desired chapter num-
ber to search. Press [ENTER].
Chapter search will start.
Note
01 /01
001/028
00:00:00/02:18:33
• In search mode display, total
numbers of each search contents
(title/chapter/time) are shown as a
denominator.
Total time
Total number
of titles
Total number
of chapters
EN 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Search (cont’d)
Track search
CD
REC/OTR
DVD
REC/OTR
VCR
Using [SKIP H / G]
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
1
SLOW
SEARCH
During playback, press [SKIP G] to skip the current track and
move to the next.
1
DUBBING
AUDIO
To go back to the beginning of the current track, press [SKIP H].
Press it repeatedly to go to the previous tracks.
.@/:
1
ABC
2
DEF
3
Using [DISPLAY]
CH
GHI
4
JKL
5
MNO
6
3
1
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
During playback, press [DISPLAY].
The Display menu will appear.
TOP MENU MENU/LIST RETURN
1
0:00:00
Audio CD
2
3
REC/OTR
DVD
REC/OTR
VCR
2
Note
Using [{ / B], select
Press [ENTER].
will be highlighted.
• During CD playback you can
enter a track number directly
using the Number buttons
for track search without
displaying the menu (except
during random and program
playback).
The track number next to
3
Using [K / L] or the Number buttons, enter a desired track number
to search. Press [ENTER].
Track search will start.
Time search
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
DVD-RW
DVD-V
DVD-RW
.@/:
1
ABC
2
DEF
3
2
CH
GHI
4
JKL
5
MNO
6
DVD-R
CD
Using [{ / B], select
[ENTER].
. Press
3
1
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
The number next to
highlighted.
To move to the clock icon
will be
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
During playback, press
[DISPLAY].
TOP MENU MENU/LIST RETURN
,
The display menu will appear.
press [B].
When time search is not available,
2
3
<DVD-Video>
and time count are not displayed.
REC/OTR
DVD
REC/OTR
VCR
1
1
0:00:00
DVD-Video
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
3
SKIP
CM SKIP
ZOOM
SKIP
Using [K / L] or the Number
buttons, enter a desired time to
search. Press [ENTER].
Time search will start.
SLOW
SEARCH
DUBBING
AUDIO
<Audio CD>
1
0:00:00
Audio CD
Note
• Time search function is
available only within the same
track or title.
48 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-RW
Playing discs
Repeat/Random/Program playback
Repeat playback
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
DVD-V
DVD-RW
.@/:
1
ABC
2
DEF
3
3
DVD-R
CD
Using [K / L], select a desired
option to repeat. Press [ENTER].
The selected repeat play will start.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
During playback, press
[DISPLAY].
The display menu will appear.
1
TOP MENU MENU/LIST RETURN
Title:
The current title will be played
repeatedly. (DVD only)
1
1
0:00:00
DVD-Video
2
3
REC/OTR
DVD
REC/OTR
VCR
Chapter:
The current chapter will be played
repeatedly. (DVD only)
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
2
Using [{ / B], select
. Press
All:
DUBBING
AUDIO
[ENTER].
Repeat menu will appear.
The current disc will be played
repeatedly. (CD, DVD-RW (VR
mode) only)
<DVD-Video>
1
1
0:00:00
DVD-Video
A-B:
OFF
Title
The A-B point will be played
Chapter
A - B
repeatedly.
When pressing [ENTER] while A-B
is highlighted, A-B repeat is set.
Press [ENTER] again to decide
the starting point (A).
Press [ENTER] after setting point
A to select the ending point (B).
Note
• The A-B Repeat playback can
only be set within the current
title (for DVDs), or current
track (for Audio CDs).
<Audio CD>
1
0:00:00
Audio CD
OFF
Track
All
• To cancel the repeat
A-B
playback, select “OFF” at
step ꢀ. The repeat setting
will be also cleared when you
stop playback.
Track:
The current track will be played
repeatedly. (CD only)
Random play
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
1
2
3
TOP MENU MENU/LIST RETURN
CD
2
With this function, you can play a
disc randomly instead of playing in
the original order.
Using [K / L], select “CD
Playback Mode”. Press
[ENTER].
REC/OTR
DVD
REC/OTR
VCR
DVD
First:
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
CD Playback Mode menu will
appear.
SKIP
SKIP
1
SLOW
CM SKIP
SEARCH
Press [SETUP].
3
Using [K / L], select “Random
Play”. press [ENTER].
Random play will start.
Note
•
To cancel random play,
press [STOP C] twice during
random play. “Playmode OFF”
appears on the screen.
EN 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Repeat/Random/Program playback (cont’d)
Program play
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
CD
.@/:
1
ABC
2
DEF
3
4
You can program a playback
sequence in your desired order.
CH
GHI
4
JKL
5
MNO
6
Using [K / L] or the Number
buttons, select a desired track.
4
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DVD
First:
Press [ENTER] or [B
A cursor will move to next.
].
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
1
TOP MENU MENU/LIST RETURN
1
Program Play
Press [SETUP].
2
3
4
09 --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
REC/OTR
DVD
REC/OTR
2
VCR
Using [K / L], select “CD
Playback Mode”. Press [ENTER].
CD Playback Mode menu will
appear.
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
SKIP
5
Total 0:06:11
SLOW
CM SKIP
SEARCH
Note
3
5
• To erase tracks you selected,
press [CLEAR].
Using [K / L], select “Program
Play”. Press [ENTER].
Program Play list will appear.
Press [PLAY B] to start
program playback.
• You can make program
settings up to 50.
Program playback will start.
Program Play
• To cancel program playback,
press [STOP C] twice during
program playback.
• “Playmode OFF” appears on
the screen.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
• You may also select a desired
track using the Number
buttons at step 4.
Total 0:00:00
Selecting the format of audio and video
You can select a desired audio and video format. Selections depend on
the contents of the disc you are playing back.
CH
GHI
4
JKL
5
MNO
6
Switching subtitles
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
DVD-V
DVD-RW
1
2
TOP MENU MENU/LIST RETURN
Many DVD-Video discs have
subtitles in one or more languages
– they usually tell you which
subtitle languages are available.
You can switch subtitle languages
anytime during playback.
Using [{ / B], select
Press [ENTER].
Subtitle menu will appear.
.
2
3
REC/OTR
REC SPEED
DVD
REC/OTR
VCR
1
1
0:00:00
DVD-Video
PLAY
OFF
1.English
2.Japanese
1
During playback, press
[DISPLAY].
Note
3
• Some discs will only allow
The Display menu will appear.
Using [K / L], select a desired
subtitle language. Press
[ENTER].
you to change subtitles from
the Disc menu. Press
[TOP MENU] or [MENU/LIST]
to display the Disc menu.
• If a 4-digit language code
appears in the subtitle
1
1
0:00:00
DVD-Video
Subtitle will be displayed in the
selected language.
When selecting “OFF”, subtitle will
disappear.
menu at step ꢀ, refer to the
“Language code” on page 8ꢀ.
50 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-V
D
V
D
-
R
W
C
D
Playing discs
Selecting the format of audio and video (cont’d)
Switching audio soundtrack
<DVD-RW VR mode>
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
1
1
0:00:00
DVD-RW
.@/:
1
ABC
2
DEF
3
When playing back a DVD-Video
disc recorded with two or more
soundtracks (these are often in
different languages), you can
switch between them during
playback.
On DVD-RW discs recorded in VR
mode, you can switch to main (L),
sub audio (R) or a mix of both (L/R).
When playing back Audio CDs
files, you can switch among
stereo, the left channel only and
the right channel only.
VR Playlist
CH
GHI
4
JKL
5
MNO
6
1.Dolby Digital Dual L/R
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
<Audio CD>
1
TOP MENU MENU/LIST RETURN
1
0:00:00
Audio CD
1. L/R
2. L
3. R
2
3
4
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
3
SKIP
CM SKIP
ZOOM
SKIP
Using [K / L], select a desired
audio soundtrack or audio chan-
nel. Press [ENTER].
<DVD-Video>
Audio soundtrack will switch.
SLOW
SEARCH
1
DUBBING
AUDIO
During playback, press [DISPLAY].
The Display menu will appear.
Note
1
1
0:00:00
DVD-Video
<DVD-RW VR mode>
• Some discs will only allow
you to change the soundtrack
from the Disc menu. Press
[TOP MENU] or
1
1
0:00:00
DVD-RW
VR Playlist
1. L/R
2. L
[MENU/LIST] to display the
Disc menu.
3. R
2
Using [{ / B], select
[ENTER].
. Press
• On DVD-RW discs recorded
in VR mode with both main
and sub audio, you can
switch to main (L), sub audio
(R) or a mix of both (L/R).
• This unit CANNOT record
in both stereo and SAP
(Secondary Audio Program)
at the same time.
Audio channel menu will appear.
Follow step 3.
Audio menu will appear.
<DVD-Video>
<Audio CD>
Audio channel will change.
1
1
0:00:00
DVD-Video
4
1.Dolby Digital 5.1ch English
2.Dolby Digital 2ch Japanese
Using [K / L], select a desired
audio channel. Press [ENTER].
Audio channel will change.
Switching virtual surround system
.@/:
1
ABC
2
DEF
3
<DVD-Video>
DVD-RW
DVD-V
DVD-RW
CH
GHI
4
JKL
5
MNO
6
1
1
0:00:00
DVD-Video
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DVD-R
CD
OFF
Type 1
Type 2
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
You can enjoy stereophonic virtual
space through your exciting ꢀ
channel stereo system.
1
TOP MENU MENU/LIST RETURN
<DVD-RW VR mode>
2
1
1
0:00:00
DVD-RW
1
VR Playlist
During playback, press [DISPLAY].
The Display menu will appear.
REC/OTR
REC SPEED
DVD
REC/OTR
VCR
OFF
Type 1
Type 2
PLAY
1
1
0:00:00
DVD-Video
<Audio CD>
1
0:00:00
Audio CD
Note
2
OFF
Type 1
Type 2
• Select Virtual Surround OFF
in a case sound is distorted.
• The setting will be kept OFF
when the unit is turned off.
Using [{ / B], select
. Press
[ENTER].
Virtual Surround menu will appear.
EN 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Selecting the format of audio and video (cont’d)
TOP MENU MENU/LIST RETURN
ENTER
3
• OFF: no effect
• Type 1: Natural effect
• Type ꢀ: Emphasized effect
Using [K / L], select “OFF”,
“Type 1” or “Type 2”.
Press [ENTER].
3
2
REC/OTR
DVD
REC/OTR
VCR
Switching camera angles
DVD-V
2
Some DVD-Video discs feature
scenes shot from two or more
angles. The disc package should
be marked with an angle icon if it
contains multi-angle scenes.
Using [{ / B], select
.
Press [ENTER].
POWER
OPEN/CLOSE
T-SET
TIMER PROG.
Angle will switch each time you
press [ENTER].
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
During playback, press
[DISPLAY].
1
TOP MENU MENU/LIST RETURN
The Display menu will appear.
1
1
0:00:00
DVD-Video
REC/OTR
DVD
REC/OTR
VCR
Note
Angle icon does not appear on
the screen in a case you have
selected Angle as “OFF” in the
Display setting.
Angle icon appears when different
camera angles are available.
Refer to pages 70-71.
Visual Noise Reduction
Noise Reduction menu will appear.
DVD-RW
DVD-V
DVD-RW
1
1
0:00:00
DVD-Video
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
DVD-R
.@/:
1
ABC
2
DEF
3
OFF
Type 1
Type 2
CH
GHI
4
JKL
5
MNO
6
1
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
During playback, press
[DISPLAY].
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
The Display menu will appear.
1
TOP MENU MENU/LIST RETURN
1
1
0:00:00
DVD-Video
2
3
3
REC/OTR
DVD
REC/OTR
VCR
Using [K / L], select a desired
option. Press [ENTER].
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Your setting will be activated.
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
This function reduces visual noise.
When playing back discs recorded
in long time mode such as SLP
or SEP mode, select “Type 1” or
“Type ꢀ”.
DUBBING
AUDIO
2
Using [{ / B], select
.
Press [ENTER].
(“Type ꢀ” is more effective.)
When playing back discs with a
few noises such as DVD-Video
discs, select “OFF”.
5ꢀ EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Information on disc editing
Guide to a title list
Editing discs in Video mode
Title list allows you to check the titles recorded on
the disc easily. You can choose a title to play it back
from this screen and easily edit the titles as you
prefer.
You can edit discs in Video mode for the following
items. Be sure that once you edit titles, you cannot
change them back to the original ones.
• Deleting titles (Refer to page 54)
• Putting names on titles (Refer to page 55)
Original
•
Setting or clearing chapter markers (Refer to page 56)
1
2
5
3
6
Note
• Once a disc is finalized, editing the disc or
recording to the disc will not be available. (Except
DVD-RW discs in VR mode.)
JAN/ 1/06 1:00AM CH12 XP
4
• A playlist is not available with the DVD-R discs
and DVD-RW discs in Video mode.
3 1
2
3
Editing discs in VR mode
For discs in VR mode, you can edit from Original
menu or Playlist menu, which is created from the
original.
Original
Title Delete
6
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect
Editing Original titles
The following items can be used to edit the Original
titles.
JAN/ 1/06 1:00AM CH12 XP
0:00:59
• Deleting titles (Refer to page 57)
• Setting titles to protect (Refer to page 58)
• Releasing titles from protecting (Refer to page 59)
8
7
6
5
4
1.Titles recorded on the disc can be selected for
editing or playing by pressing [ENTER] with the
cursor on the title.
2.The protect icon, which appears when the title has
been protected (Original titles only).
Editing Playlists
You can create a Playlist from Original titles, so that
you can edit as you prefer without losing Original
titles.
3.The arrow icon, which means the Title list has a
next or a previous page. Press [{ / B] or
[SKIP H / G] by following direction of the icon.
4.The menus for selecting a function for editing titles.
The available menus depend on the disc type and
the format type. An unavailable item is grayed out.
5.The details of the title. Title name can be changed
on the Playlist.
The following items you can edit with a Playlist.
• Deleting titles (Refer to page 60)
• Dividing a title (Refer to page 61)
• Combining titles (Refer to page 6ꢀ)
• Adding titles to a Playlist (Refer to page 63)
• Deleting a Playlist (Refer to page 63)
Editing Original titles / Playlists
The following items can be used to edit both the
Original titles and the Playlists.
• Deleting parts of titles (Refer to page 64)
• Putting names on titles (Refer to page 65)
6.Time status bar of the title.
After exiting the edit mode, you can resume
playback from the point you stopped for editing.
7.The thumbnail of the title selected from the title list.
•The selected title will be played back
automatically.
•
Setting or clearing chapter markers (Refer to page 66)
• Setting pictures for thumbnails (Refer to page 67)
8.Playback status of the current disc.
Note
• Original titles once edited will not remain as
recorded originally. When you want to leave the
original as it is, edit the Playlist as you prefer.
After you finish all editing, press [SETUP] to exit the editing mode. “Writing to Disc” appears momentarily. If
you open the disc tray, or press [POWER] to turn off the unit, or when a recording error occurs after editing,
“Writing to Disc” also appears.
EN 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in Video mode
Deleting titles
You cannot select “Chapter Mark”
when a DVD-R disc is inserted into
the unit.
“Chapter Mark” does not work on
the title less than 5 minutes.
DVD-RW
DVD-R
You can delete titles which you do
not need anymore.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
Be advised that the titles once
deleted cannot be recovered.
In Video mode, recordable disc
space of DVD-RW disc will
increase when the last title on
the title list is deleted. However,
deleting the last title will not
change recordable disc space of
DVD-R discs.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
4
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Using [K / L], select “Title
Delete”. Press [ENTER].
Confirmation window will appear.
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
1
6
Title List - Title Delete
2
3
4
5
For DVD-R or DVD-RW (in Video
mode) discs once finalized, the
title list cannot be selected for
editing.
Yes
6
No
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
DVD
First:
SLOW
SEARCH
JAN/ 1/06 1:00AM CH12 XP
0:00:59
DUBBING
AUDIO
1
Press [TOP MENU].
Title List will appear.
Title List
5
Using [K / L], select “Yes”.
Press [ENTER].
After that, “Are you sure?” will
appear, so that select “Yes” with
[K / L] and then press [ENTER].
1
2
3
6
JAN/ 1/06 1:00AM CH12 XP
4
5
Title List - Title Delete
Are you sure?
6
Yes
No
2
Using [K / L / { / B], select the
desired title. Press [ENTER].
Option window will appear.
JAN/ 1/06 1:00AM CH12 XP
0:00:59
Title List
Title will be deleted.
1
2
5
3
6
Press [RETURN ] or [STOP C]
to exit.
JAN/ 1/06 1:00AM CH12 XP
4
Play
Edit
Data will be written onto the disc
momentarily.
Title List
3
1
2
5
3
Using [K / L], select “Edit”.
Press [ENTER].
JAN/ 1/06 1:00AM CH12 XP
4
Edit menu will appear.
Title List
Title Delete
6
Edit Title Name
Chapter Mark
JAN/ 1/06 1:00AM CH12 XP
0:00:59
54 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in Video mode (cont’d)
Putting names on titles
DVD-RW
DVD-R
3
You can name titles and change
the names from this menu.
The names you put on the titles
will be displayed on a Title List.
POWER
OPEN/CLOSE
TIMER PROG.
Using [K / L], select “Yes”.
Press [ENTER].
T-SET
.@/:
1
ABC
2
DEF
3
The name you entered will be
activated for the title.
CH
GHI
4
JKL
5
MNO
6
2
4
DVD
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
First:
Title List - Edit Title Name
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Yes
6
TOP MENU MENU/LIST RETURN
1
No
Follow steps 1 to 3 on page 54 to
display the Edit menu.
Using [K / L], select “Edit Title
Name”. Press [ENTER].
A window for entering a title name
will appear.
1
2
3
REC/OTR
DVD
REC/OTR
VCR
MY FAVORITE
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
0:00:59
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
Title List - Edit Title Name
4
Press [RETURN ] and then
[RETURN ] or [STOP C] to
exit.
DUBBING
AUDIO
A
a
B
b
2
!
C
c
3
?
6
1
@
Data will be written onto the disc
momentarily.
JAN/ 1/06 1:00AM CH12 XP
This operation may take a
while to be completed.
0:00:59
[
]
Guide to edit title name
2
[
[
]
Select a desired character set using [K L], then
A B C
a b c
1 2 3
@ ! ?
Step1 :
/
To enter a title name, follow
the steps for “Guide to edit title
name” on this page.
press [ENTER].
character set
]
Step2 : Follow the list below, press the Number buttons
e.g. character set :
A B C
repeatedly until the desired letter appears.
Title List - Edit Title Name
Select
A
a
B
b
2
!
C
c
3
?
6
press
2
ABC
abc
123
@ ! ?
Press
1
@
<space> <space>
0
<space>
0
...
A B C A
! ” # $ % & ’ ( )
M
(*1)
(*1)
1
+ , - . / : ; < = >
1
Note:
Undefined letters in a
*
0:00:59
? @ [ ] ^ _ { | }
title name are shown
by “ ”. If you delete
*
them, adjoining letters
letters may change to
area for entering title names
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
2
3
4
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
When you finish entering a title
name, press [ENTER].
Confirmation window will appear.
GHI
ghi
“ ” or other.
*
JKL
jkl
5
6
MNO
PQRS
TUV
mno
pqrs
tuv
7
8
WXYZ
wxyz
9
1
2
*1 Press
*2 Press
, character set will be changed to the “ @ ” mode automatically.
!?
9
to
, character set will be changed to the previous input mode
automatically.
• To delete letters, press [CLEAR] repeatedly. Holding [CLEAR] to delete
all letters.
• Press [s /
B] to move the cursor to the left or right.
• You can enter up to 30 letters.
EN 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in Video mode (cont’d)
Setting or clearing chapter markers
DVD-RW
3
Using [K / L], select “Yes”.
Press [ENTER].
You can put chapter markers on
each title and use them for the
chapter search feature.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
The marker will be added or deleting.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
You can specify time interval for
chapter markers for titles last more
than 5 minutes.
This operation may take a
while to be completed.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
DVD
First:
TOP MENU MENU/LIST RETURN
4
4
After this operation is com-
pleted, press [RETURN ] and
then [RETURN ] or [STOP C]
to exit.
1
1
2
3
Follow steps 1 to 3 on page 54 to
display the Edit menu.
Using [K / L], select “Chapter
Mark”. Press [ENTER].
Option window will appear.
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Data will be written onto the disc
momentarily.
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
Title List - Chapter Mark
DUBBING
AUDIO
OFF
6
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
JAN/ 1/06 1:00AM CH12 XP
0:00:59
2
Using [K / L], select a desired
time period. Press [ENTER].
Confirmation window will appear.
Title List - Chapter Mark - 5 minutes
Yes
6
No
JAN/ 1/06 1:00AM CH12 XP
0:00:59
Note
• You cannot select a chapter
mark interval that exceeds
the length of a title.
• The interval of chapter marks
may be slightly longer or
shorter than the one specified
at step ꢀ.
• A chapter marker may be
delayed according to the
recording content.
56 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in VR mode (Original)
Deleting titles
DVD-RW
4
When a title is deleted from
an original list in VR mode,
the recordable disc space will
increase.
Be advised that the titles once
deleted cannot be recovered.
POWER
OPEN/CLOSE
TIMER PROG.
Using [K / L], select “Title
Delete”. Press [ENTER].
T-SET
.@/:
1
ABC
2
DEF
3
Confirmation window will appear.
CH
GHI
4
JKL
5
MNO
6
Original - Title Delete
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Yes
3
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
No
DVD
First:
TOP MENU MENU/LIST RETURN
1
6
1
Press [TOP MENU], and then
press [MENU / LIST] to change
“Playlist” to “Original”.
Original list will appear.
2
3
4
5
JAN/ 1/06 1:00AM CH12 XP
0:00:59
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
5
SLOW
SEARCH
Using [K / L], select “Yes”.
Press [ENTER].
After that, “Are you sure?” will
appear, so that select “Yes” with
[K / L] and then press [ENTER].
2
DUBBING
AUDIO
Using [K / L / { / B], select the
desired title. Press [ENTER].
Option window will appear.
Original
Original - Title Delete
1
2
5
Are you sure?
3
Play
Edit
Yes
No
JAN/ 1/06 1:00AM CH12 XP
4
6
JAN/ 1/06 1:00AM CH12 XP
Wait for a moment.
Title will be deleted.
3
Using [K / L], select “Edit”.
Press [ENTER].
This operation may take a
while to be completed.
Original menu will appear.
Original
6
Title Delete
3
After this operation is com-
pleted, press [RETURN ] or
[STOP C] to exit.
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect
Data will be written onto the disc
momentarily.
JAN/ 1/06 1:00AM CH12 XP
0:00:59
Note
• When a title is deleted from
an Original, the title on the
Playlist will be also deleted.
• Original titles once edited
will not remain as recorded
originally. When you want to
leave the original as it is, edit
the Playlist as you prefer.
EN 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in VR mode (Original) (cont’d)
Setting titles to protect
DVD-RW
3
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
To prevent accidental editing or
title erasing, you can protect the
contents in the original menu.
After this operation is com-
pleted, press [RETURN ] and
then [RETURN ] or [STOP C]
to exit.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
DVD
First:
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Data will be written onto the disc
momentarily.
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
1
TOP MENU MENU/LIST RETURN
Follow steps 1 to 3 on page 57 to
display the Original menu.
Using [K / L]], select “Protect”.
Press [ENTER].
3
To protect a whole disc
1
2
(DVD-RW VR mode Only):
Select “Disc Protect ON → OFF”
from the Disc menu, then select
“Yes”. Refer to “Setting a disc to
protect” on page 35.
REC/OTR
DVD
REC/OTR
VCR
Option window will appear.
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Original - Protect
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
OFF ON
3
DUBBING
AUDIO
JAN/ 1/06 1:00AM CH12 XP
0:00:59
2
Confirm the indication
“OFF
ON”. Press [ENTER].
Original - Protect
OFF ON
3
JAN/ 1/06 1:00AM CH12 XP
Wait for a moment.
This operation may take a
while to be completed.
The protect icon will appear on the
title in the Original list.
58 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in VR mode (Original) (cont’d)
Releasing titles from protecting
DVD-RW
3
You can cancel the title-protecting
feature.
POWER
OPEN/CLOSE
TIMER PROG.
After this operation is com-
pleted, press [RETURN ] and
then [RETURN ] or [STOP C]
to exit.
Data will be written onto the disc
momentarily.
T-SET
.@/:
1
ABC
2
DEF
3
DVD
First:
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Follow steps 1 to 3 on page 57 to
display the Original menu.
TOP MENU MENU/LIST RETURN
1
2
A “
” icon is shown on the pro-
3
tected titles.
“Protect” is already highlighted.
Press [ENTER].
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Option window will appear.
SKIP
CM SKIP
ZOOM
SKIP
Original - Protect
SLOW
SEARCH
ON OFF
3
DUBBING
AUDIO
JAN/ 1/06 1:00AM CH12 XP
0:00:59
2
Confirm the indication
“ON
OFF”. Press [ENTER].
Original - Protect
ON OFF
3
JAN/ 1/06 1:00AM CH12 XP
Wait for a moment.
This operation may take a
while to be completed.
The protect icon will disappear
from the title in the Original list.
EN 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in VR mode (Playlist)
Deleting titles
DVD-RW
4
In VR mode, even if a title is
deleted from a Playlist, the
original title will remain on the
Original list, and recordable disc
space will not increase.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
Using [K / L], select “Title
Delete”. Press [ENTER].
.@/:
1
ABC
2
DEF
3
Confirmation window will appear.
CH
GHI
4
JKL
5
MNO
6
Playlist - Title Delete
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DVD
DISPLAY
SPACE
0
CLEAR
First:
Yes
3
SETUP
ENTER
No
TOP MENU MENU/LIST RETURN
1
6
1
Press [TOP MENU] , and then
press [MENU / LIST] to change
“Original” to “Playlist”.
Playlist will appear.
2
3
4
5
JAN/ 1/06 1:00AM CH12 XP
0:00:59
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
5
SLOW
SEARCH
2
Using [K /L], select “Yes”.
Press [ENTER].
After that, “Are you sure?” will
appear, so that select “Yes” with
[K /L] and then press [ENTER].
Using [K / L / { / B], select the
desired title. Press [ENTER].
Option window will appear.
DUBBING
AUDIO
Playlist
Playlist - Title Delete
1
2
5
Play
Edit
Are you sure?
3
Yes
JAN/ 1/06 1:00AM CH12 XP
4
No
6
JAN/ 1/06 1:00AM CH12 XP
Wait for a moment.
3
Title will be deleted.
Using [K /L], select “Edit”.
Press [ENTER].
This operation may take a
while to be completed.
Playlist menu will appear.
Playlist
Title Delete
3
6
Scene Delete
After this operation is com-
pleted, press [RETURN ] or
[STOP C] to exit.
Edit Title Name
Chapter Mark
Index Picture
Title Dividing
Title Combining
Data will be written onto the disc
JAN/ 1/06 1:00AM CH12 XP
momentarily.
0:00:59
60 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in VR mode (Playlist) (cont’d)
Dividing a title
DVD-RW
3
You can divide a title into two new
titles.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
After this operation is com-
pleted, press [RETURN ] or
[STOP C] to exit.
Data will be written onto the disc
momentarily.
.@/:
1
ABC
2
DEF
3
DVD
First:
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Follow steps 1 to 3 on page 60 to
display the Playlist menu.
Using [K / L], select “Title
Dividing”. Use [SKIP H / G],
[E], [D], [PLAY B] and
[PAUSE F] to decide the point
at which you will divide the title.
Press [ENTER].
TOP MENU MENU/LIST RETURN
1
2
3
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
1
Confirmation window will appear.
SLOW
SEARCH
DUBBING
AUDIO
Playlist - Title Dividing
Yes
3
No
F
JAN/ 1/06 1:00AM CH12 XP
0:00:59
2
Using [K / L], select “Yes”.
Press [ENTER].
The title will be divided into two
new titles.
Both title names are identical, and
index pictures are reset to first
scene at this point.
Playlist - Title Dividing
Yes
3
No
F
JAN/ 1/06 1:00AM CH12 XP
Wait for a moment.
This operation may take a
while to be completed.
Note
• If a disc contains the
maximum number of
recordings (99), you cannot
divide any titles.
• You cannot divide the titles
if the total number of the
chapters have already
reached 999.
EN 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in VR mode (Playlist) (cont’d)
Combining titles
DVD-RW
3
You can combine two titles into a
single title.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
Using [s / B], select “Yes”.
Press [ENTER].
Two titles will combine into a
single title.
.@/:
1
ABC
2
DEF
3
DVD
First:
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
Playlist - Title Combining
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Follow steps 1 to 3 on page 60 to
display the Playlist menu.
Using [K / L], select “Title
Combining”. Press [ENTER].
Title Combining setting window will
appear.
TOP MENU MENU/LIST RETURN
1
2
3
1
+
2
4
Yes
No
1
2
3
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Selected title grays out, and the
frame of the next title becomes
yellow.
Wait for a moment.
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
This operation may take a
while to be completed.
Playlist - Title Combining
DUBBING
AUDIO
1
2
3
1
+
4
JAN/ 1/06 1:00AM CH12 XP
After this operation is com-
pleted, press [RETURN ] or
[STOP C] to exit.
Data will be written onto the disc
momentarily.
2
Using [K / L / s / B], select
another title to combine. Press
[ENTER].
Confirmation window will appear.
Playlist - Title Combining
1
2
3
1
+
2
Yes
No
Note
• If the number of chapter
markers in the combined title
exceeds 999, the combination
will be rejected.
• If one of two titles in the
original is deleted, the
combined new title will be
deleted.
• The name of the title selected
first will becomes the name of
the combined title.
• The title selected first will be
the first point of the combined
title.
6ꢀ EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in VR mode (Playlist) (cont’d)
Adding titles to a Playlist
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
DVD-RW
2
TOP MENU MENU/LIST RETURN
You can add or delete a title on the
playlist as you prefer.
Using [K / L / s / B], select a
desired title. Press [ENTER].
The added title will appear as the
final title.
3
You can add up to 99 titles to a
Playlist.
1
2
REC/OTR
DVD
REC/OTR
VCR
DVD
First:
Playlist - Add New Title
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
1
1
2
5
3
Follow step 1 on page 60 to display
the Playlist.
SLOW
SEARCH
DUBBING
AUDIO
JAN/ 1/06 1:00AM CH12 XP
4
Next to the final title, “Add New Title”
“Delete Playlist” menu is shown.
Playlist - Add New Title
Wait for a moment.
Note
• When a Playlist contains 99
1
2
3
This operation may take a
while to be completed.
titles or more or 999 chapters
or more, “Add New Title”
cannot be selected.
Add New
Title
• To delete a title from Playlist,
refer to “Deleting titles” on
page 60.
• To delete a Playlist, refer to
“Deleting a Playlist” on this
page.
3
Delete
Playlist
After this operation is completed,
press [RETURN ] or [STOP C]
to exit.
Using [K / L / s / B], select “Add
New Title”. Press [ENTER].
Data will be written onto the disc
momentarily.
Deleting a Playlist
Final confirmation window will appear.
DVD-RW
Playlist - Delete Playlist
A Playlist can be deleted if it is no
longer needed.
First:
1
2
5
3
DVD
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
Are you sure?
4
Yes
No
.@/:
1
ABC
2
DEF
3
Add New
Title
Delete
Playlist
1
CH
GHI
4
JKL
5
MNO
6
Follow step 1 on page 60 to display
the Playlist.
Wait for a moment.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Next to the final title, “Add New Title”
“Delete Playlist” menu is shown.
Using [K / L / s / B], select
“Delete Playlist”. Press [ENTER].
Confirmation window will appear.
TOP MENU MENU/LIST RETURN
3
Using [s / B], select “Yes”.
Press [ENTER].
4
A Playlist will be erased.
1
2
3
REC/OTR
DVD
REC/OTR
VCR
Playlist - Delete Playlist
Playlist
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
1
4
2
3
Add New
Title
Delete
Playlist
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
Yes
No
5
DUBBING
AUDIO
Add New
Title
Delete
Playlist
This operation may take a
while to be completed.
2
Using [s / B], select “Yes”.
Press [ENTER].
4
Note
After this operation is completed,
press [RETURN ] or [STOP C]
to exit.
• Deleting a Playlist will not
increase the recordable disc
space.
Data will be written onto the disc
momentarily.
EN 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in VR mode (Original / Playlist)
Deleting parts of titles
DVD-RW
5
8
You can delete a specific part of
a title.
Use [SKIP H / G], [E], [D],
[PLAY B] and [PAUSE F] to
decide the start point, then
press [ENTER].
After this operation is com-
pleted, press [RETURN ] and
then [RETURN ] or [STOP C]
to exit.
Even if parts of title are deleted
from the Playlist, the original
title will remain as it was, and
recordable disc space will not
increase.
Then use [SKIP H / G],
[E], [D], [PLAY B] and
[PAUSE F] again to move to the
end point, and press [ENTER].
Data will be written onto the disc
momentarily.
DVD
First:
A cursor will move to “Preview”.
The bar at the bottom of the
screen indicates the total and the
elapsed time of the title, and the
area selected for deletion will be
indicated in red.
Press [ENTER] again to start
the preview.
You can check the result of
deletion by “Preview”.
1
Press [TOP MENU], and then
press [MENU / LIST] to select
“Original” or “Playlist”.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
.@/:
1
ABC
2
DEF
3
2
CH
GHI
4
JKL
5
MNO
6
Using [K / L / { / B], select the
desired title. Press [ENTER].
Option window will appear.
<Playlist>
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
Start point End point
1
Playlist
Before
editing
1
2
5
2
3
4
5
6
7
Play
Edit
REC/OTR
DVD
REC/OTR
VCR
Edited
JAN/ 1/06 1:00AM CH12 XP
4
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
6
SKIP
CM SKIP
ZOOM
SKIP
6
SLOW
SEARCH
Using [K / L], select “Delete”.
Press [ENTER].
DUBBING
AUDIO
8
5
Confirmation window will appear.
<Playlist>
3
Using [K /L], select “Edit”.
Playlist - Scene Delete
Press [ENTER].
Original or Playlist menu will appear.
<Playlist>
Yes
3
No
Playlist
Title Delete
3
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Title Dividing
Title Combining
JAN/ 1/06 1:00AM CH12 XP
0:00:59
7
JAN/ 1/06 1:00AM CH12 XP
0:00:59
Using [K / L], select “Yes”.
Press [ENTER].
After that, “Are you sure?” will
appear, so that select “Yes” with
[K / L] and then press [ENTER].
<Playlist>
4
Using [K / L], select “Scene
Delete”. Press [ENTER].
Option window will appear.
<Playlist>
Note
• When a scene is deleted from
an Original, the scene on the
Playlist will be also deleted.
• Original titles once edited
will not remain as recorded
originally. When you want to
leave the original as it is, edit
the Playlist as you prefer.
• You cannot select “Scene
Delete” when the number of
chapter markers is more than
900.
Playlist - Scene Delete
Playlist - Scene Delete
Are you sure?
3
Yes
No
Start
3
End
Preview
Delete
JAN/ 1/06 1:00AM CH12 XP
Wait for a moment.
JAN/ 1/06 1:00AM CH12 XP
0:00:59
Part of a title will be deleted.
This operation may take a
while to be completed.
64 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in VR mode (Original / Playlist) (cont’d)
Putting names on titles
DVD-RW
4
Using [K / L], select “Yes”.
Press [ENTER].
The name you entered will be
activated for the title.
<Playlist>
POWER
OPEN/CLOSE
TIMER PROG.
You can name titles and change
the names in this menu.
T-SET
.@/:
1
ABC
2
DEF
3
The names you put on the titles
will be displayed on a Title List.
First:
CH
GHI
4
JKL
5
MNO
6
3
5
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DVD
DISPLAY
SPACE
0
CLEAR
Playlist - Edit Title Name
SETUP
ENTER
TOP MENU MENU/LIST RETURN
Yes
3
1
No
Follow steps 1 to 3 on page 64
to display Original or Playlist
menu.
2
3
4
REC/OTR
DVD
REC/OTR
VCR
MY FAVORITE
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
2
Wait for a moment.
SKIP
CM SKIP
ZOOM
SKIP
Using [K / L], select “Edit Title
Name”. Press [ENTER].
A window for entering a title name
will appear.
SLOW
SEARCH
5
DUBBING
AUDIO
Press [RETURN ] and then
[RETURN ] or [STOP C] to
exit.
<Playlist>
Data will be written onto the disc
Playlist - Edit Title Name
momentarily.
A
a
B
b
2
!
C
c
3
?
3
This operation may take a
while to be completed.
1
@
[
]
Guide to edit title name
JAN/ 1/06 1:00AM CH12 XP
[
[
]
Select a desired character set using [K L], then
A B C
Step1 :
/
0:00:59
press [ENTER].
a b c
1 2 3
@ ! ?
3
]
Step2 : Follow the list below, press the Number buttons
e.g. character set :
A B C
repeatedly until the desired letter appears.
To enter a title name, follow
the steps for “Guide to edit title
name” on this page.
character set
Select
press
2
ABC
abc
123
@ ! ?
Press
<space> <space>
0
<space>
0
...
A B C A
<Playlist>
Playlist - Edit Title Name
! ” # $ % & ’ ( )
(*1)
(*1)
1
+ , - . / : ; < = >
? @ [ ] ^ _ { | }
1
Note:
Undefined letters in a
title name are shown
by “ ”. If you delete
*
them, adjoining letters
letters may change to
“ ” or other.
*
*
A
a
B
b
2
!
C
c
3
?
3
1
@
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
2
3
4
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
M
GHI
ghi
0:00:59
JKL
jkl
5
6
MNO
PQRS
TUV
mno
pqrs
tuv
area for entering title names
7
8
When you finish entering a title
name, press [ENTER].
WXYZ
wxyz
9
Confirmation window will appear.
1
2
*1 Press
*2 Press
, character set will be changed to the “ @ ” mode automatically.
!?
9
to
, character set will be changed to the previous input mode
automatically.
• To delete letters, press [CLEAR] repeatedly. Holding [CLEAR] to delete
all letters.
• Press [s /
B] to move the cursor to the left or right.
• You can enter up to 30 letters.
EN 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in VR mode (Original / Playlist) (cont’d)
Setting or clearing chapter markers
<Playlist :Delete>
DVD-RW
Playlist - Chapter Mark - Delete
POWER
OPEN/CLOSE
You can put chapter markers on
each title and can use them for the
chapter search feature.
T-SET
TIMER PROG.
Yes
No
3
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
Chapter
2/
2
You can put a chapter marker
anywhere you want until the total
number of the markers reaches
999.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
F
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
JAN/ 1/06 1:00AM CH12 XP
TOP MENU MENU/LIST RETURN
0:00:59
DVD
First:
5
• You cannot delete the first
chapter of each title.
2
3
4
1
REC/OTR
DVD
REC/OTR
VCR
Follow steps 1 to 3 on page 64
to display Original or Playlist
menu.
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
4
SKIP
CM SKIP
ZOOM
SKIP
Using [K / L], select “Yes”.
Press [ENTER].
When you select “Add” at step 3, a
new chapter marker will be created
at the point you have decided.
<Playlist :Add>
SLOW
SEARCH
3
2
DUBBING
AUDIO
Using [K / L], select “Chapter
Mark”. Press [ENTER].
Option window will appear.
<Playlist>
Playlist - Chapter Mark - Add
Playlist - Chapter Mark
Yes
3
No
Add
3
Delete
Chapter
2/
2
Chapter
2/
2
JAN/ 1/06 1:00AM CH12 XP
Wait for a moment.
JAN/ 1/06 1:00AM CH12 XP
0:00:59
This operation may take a
while to be completed.
3
Use [SKIP H / G],
When you select “Delete” at step
3, the chapter marker you have
selected will be deleted.
[E], [D], [PLAY B] and
[PAUSE F] to decide the point
at which you will create a new
chapter marker.
<Playlist :Delete>
Playlist - Chapter Mark - Delete
Or, use [SKIP H / G] to
decide a chapter marker that
you will delete. Select “Add” or
“Delete” accordingly using
[K / L] . Press [ENTER].
Confirmation window will appear.
<Playlist :Add>
Yes
3
No
Chapter
2/
2
JAN/ 1/06 1:00AM CH12 XP
Wait for a moment.
Playlist - Chapter Mark - Add
This operation may take
a while to be completed.
Yes
3
No
Chapter
2/
2
5
F
After this operation is completed,
press [RETURN ] twice and
then [RETURN ] or [STOP C]
to exit.
JAN/ 1/06 1:00AM CH12 XP
0:00:59
Data will be written onto the disc
momentarily.
66 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing discs in VR mode (Original / Playlist) (cont’d)
Setting pictures for thumbnails
DVD-RW
4
POWER
OPEN/CLOSE
TIMER PROG.
You can set an image picture for
each title as a thumbnail. It helps
you remember the contents of the
title during playback. The default
setting chooses the first scene of
each title as the thumbnail.
T-SET
After this operation is com-
pleted, press [RETURN ] and
then [RETURN ] or [STOP C]
to exit.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Data will be written onto the disc
momentarily.
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
DVD
TOP MENU MENU/LIST RETURN
First:
4
2
3
1
Follow steps 1 to 3 on page 64
to display Original or Playlist
menu.
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
2
SLOW
SEARCH
2
DUBBING
AUDIO
Use [SKIP H / G], [E], [D],
[PLAY B] and [PAUSE F] to
decide the picture you want to
select as a thumbnail.
Using [K / L], select “Index
Picture”. Press [ENTER].
Confirmation window will appear.
<Playlist>
Playlist - Index Picture
Yes
3
No
F
JAN/ 1/06 1:00AM CH12 XP
0:00:59
3
Using [K / L], select “Yes”.
Press [ENTER].
A picture for thumbnail will be set.
<Playlist>
Playlist - Index Picture
Yes
3
No
F
JAN/ 1/06 1:00AM CH12 XP
Wait for a moment.
This operation may take a
while to be completed.
Note
• If a selected picture as
thumbnail is deleted by
deleting a part of a title,
a default picture will
automatically replace it.
EN 67
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Setup menu
Tour of the Setup menu
The following table shows the items which you can change the setting and their default settings.
Refer to the following table for your convenience.
Setup
Items (highlight is the default)
Contents
1.Language setting
Pages 69-70
Disc Menu
Set the language for the Disc menu.
English
French
Spanish
Audio
Set the language for audio.
Set the language for subtitle.
Original
English
French
Subtitle
OFF
English
French
ꢀ.Display setting
Pages 70-71
OSD Language
Angle Icon
Set the language for OSD
(On Screen Display).
English
Français
Español
Set the display or undisplay of multi-
angle icon in a case the DVD in
playback mode contains multi-angle
scene.
ON
OFF
Screen Saver
OFF
5 minutes
Set the time to work the screen
saver on the screen.
10 minutes
FL Dimmer
Digital Out
Auto
Bright
Dark
Set the brightness of the front panel
display.
3.Audio setting
Pages 71-7ꢀ
PCM
Set whether the sound recorded
in 96kHz will be down sampled in
48kHz.
48kHz
96kHz
Dolby Digital
Set the type of sound signal which
outputs from the digital audio output
jack.
PCM
Stream
Dynamic Range
Control
Compressing the range of sound
volume.
ON
OFF
4.Video setting
Pages 7ꢀ-73
Progressive
ON
OFF
Set to the progressive scan mode
(set to “ON”) or to the interlace scan
mode (set to “OFF”).
Still Mode
Set the type of still image in pausing
playback.
Auto
Field
Frame
5.Parental setting
Pages 73-74
Parental Lock
Set the parental level of your DVD
discs.
All
level 8 to 1
Enter the current
Set and change the password.
(Change password)
four-digit password
Note
• If you change the settings in the Setup menu, the information of contents stays on even after the power is
switched off or the disc tray is opened or closed.
• An item which is not currently available is grayed out in Setup menus.
68 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Setup menu
Language setting
Press [STOP C] if you are playing a disc.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
ABC
2
DEF
3
1
.@/:
1
Press [SETUP].
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
2
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Using [K / L], select “Playback”. Press [ENTER].
1
TOP MENU MENU/LIST RETURN
Playback menu will appear.
3
2
3
4
Using [K / L], select “Language”. Press [ENTER].
REC/OTR
DVD
REC/OTR
SKIP
VCR
SKIP
Language menu will appear.
PLAY
REC SPEED
x1.3/0.8
4
PAUSE
Using [K / L], select a desired item. Press [ENTER].
Disc Menu Language (Default : English)
Set the language for Disc Menu.
• Using [K / L], select a
language. Press [ENTER].
Your setting will be activated.
• When Original is selected,
the audio language will be the
disc’s default language.
Language
DVD
Language - Disc Menu
DVD
DVD
DVD
Disc Menu
English
Original
OFF
English
French
Spanish
Other
Audio
Subtitle
Audio Language (Default : Original)
Set the Audio language.
• Using [K / L], select a
setting. Press [ENTER].
Your setting will be activated.
• When Original is selected,
the audio language will be the
disc’s default language.
DVD
Language
Language - Audio
Disc Menu
English
Original
OFF
Original
English
French
Spanish
Other
Audio
Subtitle
Subtitle Language (Default : OFF)
Set the Subtitle language.
DVD
Language
Language - Subtitle
• Using [K / L], select a
setting. Press [ENTER].
Your setting will be activated.
Disc Menu
English
Original
OFF
OFF
Audio
English
French
Spanish
Other
Subtitle
Note
• Only the languages supported
by the disc can be selected.
• Audio Language setting may
not be available on some
discs.
If “Other” is selected, press 4-digit code using the Number buttons.
Language - Subtitle
DVD
• You can also change or switch
off the subtitles on a DVD disc
also from the Disc menu if it is
available.
• Press [CLEAR] or [s] to
erase numbers entered
incorrectly.
• When you finish entering
the code, press [ENTER].
Refer to “Language code”
on page 82.
Code Input
-
-
-
-
Instructions continue on the next page.
EN 69
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Setup menu
Language setting (cont’d)
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
5
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Press [SETUP] to exit.
5
1
TOP MENU MENU/LIST RETURN
Display setting
Press [STOP C] if you are playing back a disc.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
1
Press [SETUP].
2
3
2
REC/OTR
DVD
REC/OTR
VCR
Using [K / L], select “Display”. Press [ENTER].
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Display menu will appear.
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
3
DUBBING
AUDIO
Using [K / L], select a desired item. Press [ENTER].
OSD Language (Default : English)
Set the language for OSD.
• Using [K / L], select a
VCR DVD
VCR DVD
Display
OSD Language
language. Press [ENTER].
Your setting will be activated.
OSD Language
Angle Icon
English
English
Français
Español
ON
Screen Saver
FL Dimmer
10 minutes
Bright
Angle Icon (Default : ON)
Set to ON or OFF.
• Using [K / L], select a
setting. Press [ENTER].
Your setting will be activated.
Angle Icon
DVD
DVD
Display
ON
OSD Language
Angle Icon
English
ON
OFF
Screen Saver
FL Dimmer
10 minutes
Bright
Screen Saver (Default : 10 minutes)
Set the time to work the screen saver function on the screen.
• Using [K / L], select a
setting. Press [ENTER].
Your setting will be activated.
Display
DVD
Screen Saver
DVD
OSD Language
Angle Icon
English
ON
OFF
5 minutes
10 minutes
15 minutes
30 minutes
Screen Saver
FL Dimmer
10 minutes
Bright
70 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Setup menu
Display setting (cont’d)
FL Dimmer (Default : Bright)
Set the brightness of front panel display.
You can choose one among “Auto”, “Bright” and “Dark”.
VCR DVD
Display
• Using [K / L], select a
setting. Press [ENTER].
Your setting will be activated.
• If “Auto” is selected, the
display is shown brighter when
the power is on, darker when
the power is off.
VCR DVD
FL Dimmer
OSD Language
Angle Icon
English
ON
Auto
Bright
Dark
Screen Saver
FL Dimmer
10 minutes
Bright
PQRS
TUV
WXYZ
VIDEO/TV
7
8
9
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
4
TOP MENU MENU/LIST RETURN
4
Press [SETUP] to exit.
Audio setting
Choose the appropriate Audio settings for your equipment.
It will only affect DVD discs during playback.
Press [STOP C] if you are playing back a disc.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
1
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Press [SETUP].
1
TOP MENU MENU/LIST RETURN
2
2
3
Using [K / L], select “Playback”. Press [ENTER].
REC/OTR
REC SPEED
DVD
REC/OTR
Playback menu will appear.
VCR
PLAY
3
Using [K / L], select “Audio”. Press [ENTER].
Note
• Dynamic Range Control function is available only on the discs which are recorded in the Dolby Digital format.
Digital Out
Set the digital audio output.
• Using [K / L], select a
DVD
Audio
DVD
Audio - Digital Out
setting. Press [ENTER].
Option window will appear.
Proceed to step A or B.
PCM
Dolby Digital
48kHz
Digital Out
Stream
Dynamic Range Control
ON
Settings for PCM (Default : 48kHz)
A
Digital Out - PCM
DVD
• Using [K / L], select a setting. Press [ENTER].
Your setting will be activated.
48kHz
96kHz
48kHz :If your amplifier/decoder is NOT
compatible with 96kHz PCM, select
“48kHz”. 96kHz sound will be output in
48kHz.
96kHz :If your amplifier/decoder is compatible
with 96kHz PCM, select “96kHz”. 96kHz
sound will be output.
Note
When playing disc with
copyright protection
• Even if you select
“96kHz”, the sound will
be down sampled at
48kHz.
EN 71
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Setup menu
Audio setting (cont’d)
Settings for Dolby Digital (Default : Stream)
B
Note
• Using [K / L], select a setting. Press [ENTER].
Digital Out - Dolby Digital
DVD
When playing a DVD-RW
disc recorded in VR mode
• If the audio source on
a disc is Dolby Digital
format, set “Dolby
Digital” to “PCM” so that
you can switch to main
(L), sub audio (R), or a
mix of both (L/R) with
your amplifier/decoder.
PCM
Your setting will be activated.
Stream
PCM
:Convert the Dolby Digital into PCM(ꢀ
channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to
“PCM”.
Stream :Outputs Dolby Digital signals.
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
Dynamic Range Control (Default : ON)
Set to ON to compress the range between soft and loud sounds.
• Using [K / L], select a setting.
Press [ENTER].
Your setting will be activated.
Audio - Dynamic Range Control
DVD
Audio
DVD
ON
Digital Out
OFF
Dynamic Range Control
ON
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
4
TOP MENU MENU/LIST RETURN
4
Press [SETUP] to exit.
Video setting
Progressive (Default : OFF)
This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images
than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
1
1
TOP MENU MENU/LIST RETURN
Press [SETUP].
2
3
4
5
6
7
2
Using [K / L], select “Playback”. Press [OK].
Playback menu will appear.
3
Using [K / L], select “Video”. Press [OK].
4
Note
Using [K / L], select “Progressive”. Press [OK].
•
•
If your TV is compatible with Progressive
Scan (5ꢀ5p / 480p), you must use the
Component video cable (commercially
5
Using [K / L], select “ON”. Press [OK].
available) to connect this unit to the TV. (See
Method 3 on page 14.) If not, use the video
cable and set the Progressive Scan to
“OFF” or press and hold [SETUP] for more
than 3 seconds during DVD playback.
When selecting “No” or not pressing any
keys on the unit or remote control within 15
seconds at step 5, Progressive Scan remains
to be “OFF” (interlace scan).
Confirmation window will appear.
6
Using [s / B], select “Yes”. Press [OK].
7
Using [K / L], select “Yes” within 15 seconds. Press [OK].
7ꢀ EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Setup menu
Video setting (cont’d)
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
8
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Press [SETUP] to exit.
8
1
TOP MENU MENU/LIST RETURN
Still Mode (Default : Auto)
Set the type of still image in pausing playback.
Press [STOP C] if you are playing a disc.
POWER
OPEN/CLOSE
T-SET
TIMER PROG.
.@/:
1
ABC
2
DEF
3
1
CH
GHI
4
JKL
5
MNO
6
Press [SETUP].
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
2
TOP MENU MENU/LIST RETURN
Using [K / L], select “Playback”. Press [ENTER].
Playback menu will appear.
2
3
4
5
REC/OTR
DVD
REC/OTR
3
VCR
Using [K / L], select “Video”. Press [ENTER].
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
4
SLOW
SEARCH
Using [K / L], select “Still Mode”. Press [ENTER].
DUBBING
AUDIO
5
Using [K / L], select a setting. Press [ENTER].
Your setting will be activated.
Auto : Optimum setting is selected.
Field : Flicker-free images are played back in pause playback
mode.
Frame : Higher- resolution images are played back in pause
playback mode.
Note
• Frame is 1 completed video image made
up of ꢀ fields (There are 30 frame per
second of NTSC video).
Settings for Parental lock level
Some DVD-Video discs feature a Parental Lock level. Playback
will stop if the disc’s general rating exceeds the level you set.
It will require you to enter a password before the disc will be
played back. This feature prevents your children from viewing
inappropriate materials.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
4
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Press [STOP C] if you are playing a disc.
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
1
TOP MENU MENU/LIST RETURN
1
2
3
4
Press [SETUP].
REC/OTR
DVD
REC/OTR
VCR
2
Using [K / L], select “Playback”. Press [ENTER].
Note
Playback menu will appear.
• Parental lock function may not be
available on some discs.
• For some DVDs, it may be difficult to
3
find if they are compatible with parental
lock. Be sure to check if the parental lock
function operates in the way that you
have set.
Using [K / L], select “Parental Lock”. Press [ENTER].
4
Using [K / L], select the desired level. Press [ENTER].
• Record the password in case you forget it.
EN 73
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Setup menu
Settings for Parental lock level (cont’d)
Parental Lock (Default : All)
Set the Parental Lock level.
• Using [K / L], change
the parental level. Press
[ENTER].
Option window will appear
Proceed to step A or B.
Playback
DVD
Parental Lock
DVD
Audio
All
8
Video
7
Language
Parental Lock
6
All
5
4
3
2
1
A password has not been set yet.
A
Parental Lock
DVD
Parental Lock
DVD
Change Password?
Yes
No
Yes
Password Input
-
-
-
-
• Using [K / L], select “Yes”.
Press [ENTER]. If you select
“No”, proceed to step 5.
• Using the Number buttons,
enter a new password. Press
[ENTER].
Your setting will be activated.
A password has been set already.
B
<Change the password>
Parental Lock
DVD
Parental Lock
DVD
Parental Lock
DVD
Change Password?
Yes
No
Yes
Password Input
Password Input
-
-
-
-
* * * *
• Using the Number buttons,
enter the current password.
• Using [K / L], select “Yes”.
Press [ENTER]. If you select
“No”, proceed to step 5.
• Using the Number buttons,
enter a new password. Press
[ENTER].
Your setting will be activated.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
5
5
TOP MENU MENU/LIST RETURN
Press [SETUP] to exit.
Note
• Press [CLEAR] to erase numbers entered incorrectly.
• Do not use 4, 7, 3, 7 as password.
• When you forget the password or you want to clear all settings in Parental lock, enter 4,7,3,7 using the
Number buttons in input window at step B. Password will be cleared and parental levels will be set to “All”.
74 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR functions
Playback
Playback
VCR
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
4
1
3
Press [PLAY B] to resume play.
.@/:
1
ABC
2
DEF
3
1
Press [POWER] on the remote
control or the front panel of the
unit.
When you are playing a videotape,
turn the TV on and be sure to
select the input to which the unit is
connected.
5
Press [STOP C] to stop
playback.
REC/OTR
DVD
REC/OTR
VCR
6
2
4
5
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
Press [STOP C / EJECT A] on
the front panel of the unit to
eject the videotape.
SKIP
CM SKIP
ZOOM
SKIP
VCR
Press:
SLOW
SEARCH
DUBBING
AUDIO
2
Insert a prerecorded videotape.
Press [PLAY B] to begin
playback.
Note
• When a videotape without
record tab is inserted, the
unit will start playback
automatically.
• Tracking will be automatically
adjusted upon playback. To
adjust the tracking manually,
press [CHANNEL L / K] on
the front panel of the unit or
[CH K / L] on the remote
control.
3
During playback, press
[PAUSE F].
Playback will pause and sound will
be muted.
Recording and One-touch Timer Recording
Recording
TOP MENU MENU/LIST RETURN
ENTER
VCR
First:
VCR
1
Before recording, make sure:
Press [REC/OTR] (VCR) to begin
the recording.
•
The desired channel is selected
by pressing the Number buttons
or [CH K / L] on the remote
control or [CHANNEL L / K] on
the front panel of the unit.
REC/OTR
DVD
REC/OTR
VCR
1
To temporarily stop recording or
to resume it, press [PAUSE F].
After the unit has been in Pause
mode for 5 minutes, it will stop
automatically to protect the
videotape and the video head from
damage.
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
1
2
SLOW
SEARCH
DUBBING
AUDIO
•
•
There is a videotape with a
record tab in the unit.
The desired recording speed is
selected in SP (standard play) or
SLP (super long play) mode by
pressing [REC SPEED] on the
remote control.
Note
• To view one channel while
recording another
2
Press [STOP C] when the
recording is completed.
1) While you are recording on
the unit, press [VIDEO/TV].
ꢀ) At the cable box or satellite
box, select the channel you
want to view.
If you have connected the
unit to a cable box or satellite
box, refer to “Connection to
a cable box or satellite box”
section on page 15.
Recording speed:
Accidental erasure prevention
Tape speed
Type of tape
SP mode
Recording/Playback Time
To prevent accidental record-
ing on a recorded videotape,
remove its record tab. To
record on it later, cover the
T60
T1ꢀ0
ꢀhours ꢀ-ꢀ/3hours
6hours 8hours
T160
1hour
3hours
SLP mode
Record tab
hole with cellophane tape.
•
•
Stereo or SAP is selected. Refer
to page ꢀ1.
Refer to page 31 for instructions
on Timer Recording.
EN 75
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR functions
Recording and One-touch Timer Recording (cont’d)
One-touch Timer Recording (OTR)
TOP MENU MENU/LIST RETURN
ENTER
VCR
To change the recording length
during the One-touch Timer
Recording, press [REC/OTR] (VCR)
repeatedly until the desired length
appear.
This feature allows you to set the
recording length simply by pressing
[REC/OTR] (VCR) on the remote
control or [VCR RECORD] on the
front panel of the unit.
REC/OTR
DVD
REC/OTR
VCR
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
1
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
To cancel the One-touch Timer
Recording within the specified
time, press [STOP C].
1
DUBBING
AUDIO
1
During normal recording, press
[REC/OTR] to begin One-touch
Timer Recording.
• Unlike a Timer Recording,
Note
you can perform the following
operations during a One-touch
Timer Recording.
• The remaining recording time
will appear on the display panel
during a One-touch Timer
Recording. Press [DISPLAY] to
see it on the TV screen.
• You cannot pause a One-
touch Timer Recording.
• If OTR is finished in VCR
during playback or REC mode
in DVD, the VCR will be in
STOP mode and the DVD
keeps the current mode.
You can select a fixed recording
time by pressing [REC/OTR] (VCR)
repeatedly.
- Turning the power off
- Using [REC/OTR] (VCR) or
[STOP C].
• When OTR is finished and
the power is turned off, the
unit will switch to the standby
mode automatically if a
(0:30)
(1:00)
(Normal recording)
(8:00)
(7:30)
When One-touch Timer
Recording is finished, the unit
will turn off automatically.
Timer Recording has been
programmed. Press [T-SET] to
cancel the standby mode for
using the unit continuously.
Search
Index search
VCR
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
3
An index mark will be assigned at
the beginning of each recording
you make. You may skip to a
specific marked point by following
the steps below.
.@/:
1
ABC
2
DEF
3
Press [E], [D] to start index
search.
CH
GHI
4
JKL
5
MNO
6
2
If you want to go in the forward
direction, press [D].
If you want to go in the reverse
direction, press [E].
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
VCR
First:
After index search, the VCR will
play the videotape automatically.
1
Press [SEARCH] so that the
index search menu appears.
REC/OTR
DVD
REC/OTR
VCR
CURRENT PROGRAM
Beginning
of tape
End
of tape
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
3
1
2
SLOW
SEARCH
Using the Number buttons, enter
the number of recordings you
wish to skip within 30 seconds.
INDEX MARK
DUBBING
AUDIO
INDEX SEARCH
03
Note
• Every time a videotape is recorded, an index mark is written on the
videotape.
• You can make the index mark up to ꢀ0.
76 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR functions
Search (cont’d)
Time search
VCR
POWER
OPEN/CLOSE
TIMER PROG.
TIME SEARCH
ꢀ:50
T-SET
This feature allows you to go to a
specific point on a videotape by
entering the exact amount of time
you wish to skip in order to reach
the point.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
2
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
VCR
First:
TOP MENU MENU/LIST RETURN
3
Press [E], [D] to start time
search.
1
Press [SEARCH] repeatedly so
that the TIME SEARCH menu
appears.
REC/OTR
DVD
REC/OTR
VCR
If you want to go in the forward
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
direction, press [D]
If you want to go in the reverse
direction, press [E]
After time search, the unit will play
the videotape automatically.
.
SKIP
SKIP
3
1
.
SLOW
CM SKIP
SEARCH
2
Using the Number buttons,
enter your desired time to skip
within 30 seconds.
Note
You can set the time up to 9:59.
• These functions are not available during recording.
• Press [STOP C] to stop the search.
• If the end of the videotape is reached during Search, this unit will
cancel the search and rewind the videotape.
Other operations
VCR
First:
VCR
Fast forward:
When the unit is in stop mode, press [D] to fast forward the videotape.
Rewind:
When the unit is in stop mode, press [E] to rewind the videotape.
To cue or review picture during playback (Picture Search):
Press [E], [D] during playback.
Press it again and the unit will search in super high speed. (in the SLP mode only)
To freeze the picture on TV screen during playback (Still Mode):
Press [PAUSE F]. Each time you press the button, the picture will be
forwarded by one frame.
If the picture begins to vibrate vertically during the Still Mode, stabilize
the picture by pressing [CHANNEL L / K] or [CH K / L].
If the picture is distorted or rolling vertically, adjust the vertical hold
control on your TV, if equipped.
Your Selection
HIFI
MONO
L-channel
R-channel
Type of recorded tape
non Hi-Fi tapes
Monaural
Monaural
Monaural
L+R
Hi-Fi tapes
recorded in
Hi-Fi stereo
L
R
Hi-Fi tapes
recorded main
audio program
Main audio
program
Main audio
program
Main audio
program
Counter Reset:
Press [CLEAR].
To playback in slow motion:
Hi-Fi tapes
recorded second
audio program
Second audio Second audio Second audio
program program program
Press [SLOW ] during playback or the Still Mode.
If the noise bars appear on the TV screen, you can reduce it by pressing
[CHANNEL L / K] or [CH K / L].
Automatic Rewind
Note
• Still/Slow/Pause mode will be
automatically canceled after 5
minutes to prevent damage to
the videotape and the video
head.
• To return to playback from
the Picture Search/Still/Slow
mode, press [PLAY B].
When a videotape is played or fast forwarded to its end, the videotape
will rewind to the beginning, stop and eject itself.
When you playback a videotape recorded in Hi-Fi stereo:
Press [AUDIO] on the remote control to select Hi-Fi or MONO for
playback sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select “MONO”.
EN 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance.
Symptom
Remedy
The power does not turn on.
•Check that the AC power cord is connected securely.
•(In case of power failure) Check the breaker.
•Press [T-SET] to cancel the timer standby mode.
There is no picture.
•Re-connect the connecting cord securely.
•The connecting cords are damaged.
•Check the connection to your TV (page 14).
•Check the RF output channel when you view a TV program using
RF connection.
•Switch the input selector on your TV (such as to “LINE1”) so that
the signal from this unit appears on the TV screen.
TV program reception does not fill •Try to set the channels with “Auto Preset” in the Setup menu (page 19).
the screen.
•Select a channel of any TV program using the [CH K / L].
•Press [VIDEO/TV] if necessary.
TV program pictures are distorted. •Adjust TV antenna.
•Adjust the picture (see the TV’s instruction manual).
•Place the unit and TV farther apart.
•Place the TV and any bunched antenna cables farther apart.
TV channels cannot be changed.
Playback picture is distorted.
•Switch the input to TV.
•Connect the antenna cable correctly (page 14).
•Keep the equipment which may cause electrical disturbances, such
as a cellular phone, away.
The playback picture or TV
program from the equipment
connected through the unit is
distorted.
•If the playback picture output from a DVD player, VCR or tuner
goes through the unit before reaching your TV, the copy-protection
signal applied to some programs could affect picture quality.
Disconnect the playback equipment in question and connect it
directly to your TV.
D
V
D
•
V
C
R
There is no sound.
•Re-connect all connections securely.
•The connecting cord is damaged.
•Check the connections to the amplifier input.
•The input source setting on the amplifier is incorrect.
•The unit is in pause mode or in Slow forward / Slow reverse play.
•The unit is in fast forward or fast reverse mode.
The channel cannot be changed
from the channel you are recording.
•Set the TV’s input to “TV”.
Nothing was recorded even though •There was a power failure during recording.
you set the timer setting correctly. •The internal clock of the unit stopped due to a power failure that
lasted for more than 30 seconds. Reset the clock (pages ꢀꢀ-ꢀ4).
•Disconnect the AC power cord from the AC outlet, and connect it
again.
•The program contains copy protection signals that restricts copying.
•The timer setting overlapped with another setting that was set later
or has priority.
Timer Recording is not completed
or did not start from the beginning.
•The timer setting overlapped with another setting that has priority
(page 33).
•Disc space was not enough.
Timer Recording is impossible.
•Make sure appears on the front panel display of this unit. If not,
press [T-SET].
The remote control does not work. •Check the antenna or cable connection to the main unit.
•Check the battery life of the remote control.
•Check if there is an obstacle between the sensor and the remote
control.
•Test the signal output. If OK, then possible remote sensor trouble.
(Refer to “IR SIGNAL CHECK” on page 5.)
•Press [DVD ] or [VCR ], whichever you need. Then, try again.
•Press [T-SET] to cancel the timer standby mode.
•If above remedies do not solve the problem, please call an
Authorized Service Center for help.
The unit does not operate properly. •When static electricity, etc., causes the unit to operate abnormally,
unplug the unit and then plug it again.
78 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting (cont’d)
Symptom
Remedy
There is no picture.
•The Setup Display appears. Press [RETURN
turn off the display.
] (or [SETUP]) to
•Check if the INTERLACE/PROGRESSIVE mode is set correctly
according to your TV. See page 14.
Picture noise appears.
There is no sound.
•The disc is dirty or flawed.
•If the picture output signal from the unit passes through your VCR
before reaching your TV, or if you are connected to a combination
TV/VIDEO player, the copy-protection signal applied to some DVD
programs could affect picture quality. If you still experience this
problem even when you connect the unit directly to your TV, try
connecting the unit to your TV’s S-VIDEO input.
•If the audio signal does not come through the DIGITAL OUT
(COAXIAL) jack, check the Audio settings (pages 71-7ꢀ).
•The disc is dirty or flawed.
Sound is noisy.
•The disc is dirty or flawed.
No DTS sound is output.
•This unit is not compatible with DTS sound.
The unit does not play back the
disc.
•No disc is inserted.
•A blank disc is inserted.
•The disc is upside down. Insert the disc with the labeled side facing up.
•The disc is not correctly inserted.
•The unit cannot playback certain discs (such as a CD-ROM) (page 40).
•The region code on the DVD-Video does not match the ones on the
unit (page 40).
•Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on for about two hours until the moisture
evaporates (page 4).
•If the disc was recorded on another recorder, the unit cannot play
back the disc unless it is finalized (page 36).
Playback image freezes for a
second.
•During the playback of two layered disc, picture may freeze for a
moment when the 1st layer switches to the ꢀnd layer. This is not a
malfunction.
•Resume play was activated (page 44). Press [STOP C] twice.
•You have inserted a disc whose Title menu or DVD menu
automatically appears on the TV screen when it is first insert.
D
V
D
The disc does not start playback
from the beginning.
The unit starts playing back the disc •The DVD-Video features an auto playback function.
automatically.
Some functions such as Stop,
Search, or Slow-motion Play
cannot be performed.
•Depending on the disc, you may not be able to do some of those
operations. See the instruction manual supplied with the disc.
The language for the sound track
cannot be changed.
•Multilingual tracks are not recorded on the DVD-Video, DVD-R or
DVD-RW being played back.
•The DVD-Video prohibits the changing of the language for the
sound track.
•Try changing the language using the DVD-Video’s menu.
The subtitle language cannot be
changed or turned off.
•Multilingual subtitle are not recorded on the DVD-Video.
•The DVD-Video prohibits changing of the subtitles.
•Try changing the subtitles using the DVD-Video’s menu.
The angles cannot be changed.
•Multi-angles are not recorded on the DVD-Video being played back.
•The angle-change operation is possible as long as the disc
contains a multi-angle portion. Actual change can be performed
when the portion has come up.
•The DVD-Video prohibits changing angles.
•Try changing the angles using the DVD-Video’s menu.
Recording does not stop immediately •It will take a few seconds for the unit to input disc data before
recording can stop.
after you press [STOP C].
Recording does not start immediately •An unused DVD-R or DVD-RW was inserted. It takes a while for
after you press [REC/OTR] (DVD). the unit to automatically format a DVD-RW.
The disc tray does not open when •It may take a few seconds for the disc tray to open after you have
recorded or edited a disc. This is because the unit is adding disc
data to the disc.
you press [OPEN/CLOSE A].
EN 79
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting (cont’d)
Symptom
Remedy
“Repairing” appears on the TV screen. •If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Wait for a moment.” message is
disappeared), a Repairing process will begin automatically just after
Repairing
turning the unit on again.
It may take several minutes up to about four hours.
In a case you intend to cancel the
D
V
D
•If you intend to cancel the Repairing process, press
Repairing process.
[OPEN/CLOSE A] on the front panel, then select “Yes” with
[{ / B] and press [ENTER]. After that, the disc tray will
Do you want to cancel a repairing process ?
When selecting “Yes”, the disc may not be
usable.
automatically open. In case the Repairing process is canceled,
the disc MAY NOT work.
Yes
No
Repairing
Picture noise appears.
•Head cleaning for VCR may be necessary. Refer to “AUTO HEAD
CLEANING”.
•Adjust tracking control for better picture by pressing [CHANNEL L / K]
on this unit or [CH K / L] while you are playing a videotape.
The tape does not play.
•No videotape is inserted.
V
C
R
Recording does not start immediately •Make sure the videotape has a record tab when you record to a
after you press [REC/OTR] (VCR).
The remote control does not
function.
videotape. If needed, cover the hole with cellophane tape.
•Check if a videotape is in this unit.
The motor rotates even when
playback / recording is stopped.
•The motor may rotate for the duration of approximately 5 minutes
for efficient operation. This is not a malfunction.
Error message
Cause
Solution
•Unplayable disc is inserted in the
unit.
•The disc is upside down.
•Insert the standardized disc which
bear the marks on page 40.
•Insert the disc with the labeled side
facing up.
Disc Error
--- Please eject the disc. ---
Playback feature may not be
available on this Disc.
•The region of the DVD-Video disc
does not match the ones on the
unit.
•Insert the DVD-Video disc with
region codes 1 or ALL.
Region Error
--- Please eject the disc. ---
Playback is not authorized in
your region.
•The current selected parental
level in the Setup menu prohibits
playback.
•Check the “Parental Lock” setting
(pages 73-74).
Parental Lock On
The current selected parental
level prohibits playback.
•The recording function encountered •You cannot record copy prohibited
Recording Error
This program is not allowed to
be recorded.
the copy prohibited program.
programs.
•You are trying to record the copy-
once program onto the DVD-RW
disc in Video mode.
•Set “Format mode” to “VR mode”
(pages ꢀ7-ꢀ8).
Recording Error
This program is not recordable
in Video mode.
•You are trying to record onto the
disc which is unrecordable, or the
disc status is unable to record.
•The disc is dirty.
•Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (pages ꢀ5-ꢀ6).
Recording Error
Can not record on this disc.
•
Clean the disc with a cleaning cloth.
•The disc is damaged.
•Replace the disc.
•You are trying to record the copy-
•Insert the DVD-RW disc in VR
Recording Error
This program is not allowed to
be recorded on this disc.
once program onto the DVD-RW disc mode (ver.1.1 or 1.ꢀ compatible
which is not compatible with CPRM.
with CPRM).
•You are trying to record on to the
protected disc which is set in the
Disc menu.
•Release the disc protect setting in
the Disc menu (page 35).
Recording Error
This disc is protected and not
recordable.
•You are trying to record onto
the disc which has no space for
recording.
•Insert the recordable disc with
enough recording space.
Recording Error
Disc is full.
(No area for new recording)
80 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting (cont’d)
Error message
Cause
Solution
You are trying to record onto the disc Delete unnecessary titles
Recording Error
You cannot record more than 99
titles on one disc.
on which the number of recording
(pages 54, 57).
titles comes up to the maximum (99).
(The maximum is 99)
You are trying to record onto the VR Delete unnecessary chapter markers
Recording Error
You cannot record more than
999 chapters on one disc.
mode DVD-RW disc on which the
number of recording chapters comes
up to the maximum (999).
(page 66).
(The maximum is 999)
This disc has no space to write the
Control Information when recording
or deleting contents.
When editing has been repeatedly
performed, the control Information
area may come up to be full even the
recording area has enough space.
Delete unnecessary titles
(pages 54, 57).
Recording Error
You cannot record on this disc
as Control Information is full.
When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
Insert a new disc.
Recording Error
You cannot record on this disc
as Power Calibration Area is
full.
Every time you insert a disc for
recording, the disc’s working area will
be taken up. And if you repeat this
frequently, it will be used up sooner
and you may not be able to record
full 99 titles.
You are trying to record onto
the disc already finalized.
Release the finalizing for this
disc (page 36).
Recording Error
This disc is already finalized.
* If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the
error description, and call our helpline mentioned on the front page to locate an Authorized Service Center.
RF output switch
You can watch the TV programs
with the tuner of the unit. (Usually
channel 3 or 4 of the TV is
available for the RF converter
setting.) Be sure to connect the
unit to a TV using the RF cable.
Refer to page 14.
• Each time the RF output
channel is changed, CH3 or
CH4 will appear on the front
panel display.
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
1
for more than
3 seconds
Select channel 3 on your TV.
2
3 seconds
Press [VIDEO/TV] on the remote
control.
(
(
(
)
RF on CH4
3 seconds
• If noise appears, change the
RF output channel of the unit to
CH 4 by pressing [VIDEO/TV]
for 3 seconds. The RF output
channel will alternate between
CH3 and CH4 as follows.
)
RF on CH3
3 seconds
)
RF on CH4
3 seconds
EN 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Glossary
an analog-to-digital converter, generat-
ing a stream of numbers. On playback,
a digital-to-analog converter generates
an analog signal based on these num-
bers. See also Sampling frequency and
Analog audio.
Analog audio
Regions code
An electrical signal that directly repre-
sents sound. In contrast, digital audio
which can be an electrical signal, but
is an indirect representation of sound.
See also Digital audio.
Regions associate discs and players
with particular areas of the world. This
unit will only play back discs that have
compatible region codes. You can find
the region code of your unit by looking
at the rear panel. Some discs are com-
patible with more than one region (or
all regions).
Dolby Digital
Aspect ratio
The system developed by Dolby
Laboratories to compress digital sound.
It offers you sound of stereo(ꢀch) or
multi-channel audio (up to 5.1ch).
The width of a TV screen relative to its
height. Conventional TVs are 4:3 (in other
words, the screen is almost square);
widescreen models are 16:9 (the screen
is almost twice as wide as it is high).
Sampling frequency
The rate which sound is measured by
a specified interval to turn it into digital
audio data. The numbers of sampling
in one second defines as sampling fre-
quency. The higher the rate, the better
the sound quality is.
Finalize
To make recorded contents on DVD
discs possible to be played back on
DVD players. With this unit, it is pos-
sible to finalize DVD-RW/DVD-R discs.
Chapter
Just as a book is split up into several
chapters, a title on a DVD disc is usually
divided into chapters. See also Title.
SAP (Secondary Audio Program)
PCM (Pulse Code Modulation)
Component video output
Sub audio channel which is delivered
separately from main-audio channel.
This audio channel is used as an alter-
nate in bilingual broadcasting.
PCM is a format that converts audio
into digital data. It is mainly used for
Audio CDs and DAT. This unit can play
back sounds as realistic as possible
by converting even compressed Dolby
Digital and MPEG audio to PCM.
This is a video signal format that con-
veys each of three principal colors of
light (red, blue and green) through
different signal lines. This allows the
viewers to experience picture colors
as original as it is. There are several
signal formats, including Y/PB/PR and
Y/CB/CR.
S-Video output
It delivers independently each signal
of color(C) and luminance(Y) to TV as
video signals, so that higher-quality
picture will be materialized.
Playlist
From this list you can play back con-
tents of a disc in your desired order or
sequence. Also it allows to search a
specific scene directly.
CPRM (Content Protection for
Recordable Media)
Title (DVD only)
A collection of chapters on DVD disc.
See also Chapter.
This is a format used to record copy-
once programs. By recording coded data
on the area of DVD discs that ordinary
writing software cannot write on, it pre-
vents copy-once programs from being
recorded repeatedly on different media.
Progressive Scan (525p/480p)
A type of display that does not split
each frame into fields, and instead
scans directly through all the scanlines
of each frame in order. Progressive
Scan provides less flickering and
higher image resolution than tradi-
tional (5ꢀ5i/480i) TV signals. Refer to
page 15 for instructions on selective
Progressive Scan mode.
Track
Audio CDs use tracks to divide the
content of a disc. The DVD equivalent
is called a chapter. See also Chapter.
Digital audio
An indirect representation of sound by
numbers. During recording, the sound
is measured at discrete intervals (44,
100 times a second for CD audio) by
Language code
Language
Abkhazian
Afar
Code
Language
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Code
Language
Code
Language
Sindhi
Code
4748
4747
475ꢀ
6563
4759
4764
5471
4765
4771
477ꢀ
4847
5167
4860
507ꢀ
4854
4855
4864
4853
5971
4851
5759
4947
7ꢀ54
4961
5464
4965
5047
6058
5160
5161
5166
5ꢀ61
5ꢀ56
5ꢀ55
5ꢀ64
5ꢀ71
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6ꢀ47
6ꢀ65
5ꢀ47
6ꢀ58
6ꢀ66
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
677ꢀ
6855
6861
4971
6961
7054
5655
7161
7ꢀ67
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Finnish
8ꢀ EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Frequently Asked Questions
–– Can I record on CD-RW/R?
No, this unit records only DVDs.
–– Can I play back DVD-Video that is bought in another country?
Possible only if the region code of the disc is 1 and ALL.
–– Is this unit JPEG compatible?
No.
–– Can I connect the unit to my PC?
No, you cannot control the unit by PCs.
Specifications
General
System
DVD-Video, DVD-RW/R, CD-DA, Dimensions
CD-RW/R, Video Cassette Tape (width x height x depth) 17 3/16” x 3 15/16” x 10 5/16”
(435 x 99.5 x ꢀ6ꢀ mm)
VCR video heads
Four heads
Power requirements AC1ꢀ0 V, 60 Hz
Operating temperature 41Fº to 104Fº (5ºC to 40ºC)
Power consumption 30 W (standby: 3.0 W)
Operating humidity
TV format
Less than 80% (no condensation)
NTSC
Weight
9.5 lbs ( 4.3 kg )
Recording
Recording format
Video Recording format
(DVD-RW only),
Video format (DVD-RW, DVD-R)
Video recording format
Sampling frequency
Compression format
13.5MHz
MPEG
Recordable discs
DVD-Rewritable,
DVD-Recordable
Audio recording format
Sampling frequency
Compression format
48kHz
Dolby Digital
Tuner
Receivable channels
RF Converter
Converter output
Built-in VHF converter
VHF channel 3 or 4
VHF
ꢀ-13ch
14-69ch
C1-C1ꢀ5ch
UHF
CATV
Input / Output
Video input
Input level
Jacks
Input 1 (rear), ꢀ (front)
1 Vp-p (75W)
RCA jacks
Video output
Output level
Jack
1 Vp-p (75W)
RCA jack
S-Video input
Input 1 (rear), ꢀ (front)
S-Video output
Y (Iuminance)
Y (Iuminance)
- Input level 1 Vp-p (75W)
- Output level 1 Vp-p (75W)
C (color)
C (color)
Jack
- Input level ꢀ86 mVp-p (75W)
- Output level ꢀ86 mVp-p (75W)
Jacks
4 pin mini DIN
4 pin mini DIN
Audio input
Input 1 (rear), ꢀ (front) L/R
Audio output
During audio output
Jacks
Output 1, ꢀ L/R
ꢀV rms (47kW)
RCA jacks
During audio input ꢀV rms (47kW)
Jacks
RCA jacks
Component video output
Digital audio output
Output level
Jack
VHF/UHF antenna
input/output terminal
500 mVp-p (75W)
Output level
Jacks
Y: 1.0 Vp-p (75W),
RCA jack
PB/CB, PR/CR: 0.7 Vp-p (75W)
RCA jacks
VHF/UHF set 75W
Note:
The specifications and design of this product are subject to change without notice.
EN 83
Download from Www.Somanuals.com. All Manuals Search And Download.
Español
Fácil grabación de DVD
Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD.
Nota:
Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV.
Paso 1: Elija un tipo de disco.
Puede elegir entre distintos tipos de discos DVD
grabables. Elija un tipo de disco DVD grabable de
acuerdo con sus necesidades de reproducción/
grabación. Vea los "Tipos de discos DVD" en la
parte inferior de esta página para más detalles
sobre las diferencias entre los distintos medios
compatibles.
Paso 2: Coloque un disco en blanco.
Mando a distancia
Para
encender
1
POWER
CLOSE
T
T-SET
.@/:
1
ABC
2
3
Seleccione
el modo
DVD
2
Este grabador de DVD puede grabar los
siguientes tipos de discos.
REC/OTR
REC SPEED
DVD
REC/OTR
VCR
PLAY
Para abrir
3
4
POWER
OPEN/CLOSE
(o)
T-SET
TIMER PROG.
.@/:
1
ABC
2
DEF
3
Por ejemplo, cuando desea grabar repetidam-
ente en el mismo disco o cuando desea editar
el disco después de grabar, seleccione el
disco de tipo regrabable DVD-RW.
POWER
OPEN/CLOSE
T-SET
TIMER PROG.
.@/:
1
ABC
2
DEF
3
Cuando desea guardar grabaciones sin alter-
arlos, un DVD no regrabable DVD-R puede ser
más conveniente.
5
Para cerrar
Cargando
Esta operación puede
demorar en reconocerse.
Tipos de discos DVD
Algunas funciones son limitadas : No puede utilizar
Formato del disco
: Más adecuado
: Puede utilizar
:
Cuando coloque un disco
que fue grabado, peude
borrar todo el contenido
formateando el disco.
El formato es necesario
para preparar el disco
grabado previamente para
grabar. Vea los detalles en
las páginas 27-28.
Desea
Grabar programas de TV
DVD-RW VR
DVD-RW Video
DVD-R
Volver a utilizar borrando partes no deseadas
Editar las grabaciones
Editar/grabar de equipos conectados
Copiar discos para distribución
*1
*1
Reproducir en otro equipo de DVD
Detalles
Grabación
¿Regrabable?
DVD-RW VR
DVD-RW Video
DVD-R
Al formatear, todo el
contenido de ese disco se
borará.
• La unidad empieza a
iniciar automáticamente
cuando se inserta un
disco DVD-RW no usado.
Sí
Sí
Sí
Sí
Sí
Sí
Sí
No
Sí
Puede crear capítulos a intervalos fijos (auto.)
Puede crear capítulos donde desee (manual)
Puede grabar imágenes de tamaño 16:9
Puede grabar un programa de Copia-una-vez
No
Sí
No
Sí
No
No
Edición
Puede hacer funciones de edición básica
Sí
Sí
Sí
Puede hacer funciones de edición avanzadas (edición de lista a reproducir) Sí
No
No
*1
El DVD-RW (modo VR) sólo puede
reproducirse en equipos de DVD compatibles
con VR.
Nota:
Para más detalles sobre las funciones anteriores y
las limitaciones implícitas, lea las explicaciones en
este manual.
84 ES
Download from Www.Somanuals.com. All Manuals Search And Download.
Español
Fácil grabación de DVD (cont.)
Paso 3: Seleccione
la velocidad
Paso 4: Seleccione
el canal
Paso 5: Grabe en
discos
degrabación.
deseado.
DVD.
PQRS
7
TUV
WXYZ
VIDEO/TV
8
9
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
POWER
OPEN/CLOSE
TIMER PROG.
TOP MENU MENU/LIST RETURN
T-SET
.@/:
1
ABC
2
DEF
3
REC/OTR
DVD
REC/OTR
VCR
CH
GHI
4
JKL
5
MNO
6
PLAY
REC SPEED
x1.3/0.8
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SKI
CM SKIP
ZOOM
IP
REC/OTR
DVD
REC/OTR
SKIP
VCR
SKIP
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
SLOW
PLAY
REC SPEED
x1.3/0.8
TOP MENU MENU/LIST RETURN
DUBBING
AUDIO
PAUSE
CH 12
XP
0:58
I
Sugerencia 1: Reproduzca el contenido grabado
Inicio de grab.
Parada/inicio
Parada grab.
Puede seleccionar el título que desea
reproducir de un menú indicado y empiece
a reproducir inmediatamente. El contenido
grabado se puede acceder fácilmente con un
simple procedimiento de elegir un título en un
capítulo en la pantalla del menú.
Título 1
Título 2
Paso 6: Pare la
grabación.
¿Qué son títulos y capítulos?
El contenido de un disco DVD se divide gen-
Capítulo 1 Capítulo 2 Capítulo 3 Capítulo 1 Capítulo 2
eralmente en títulos. Los títulos pueden dividirse a su vez en capítulos.
REC/OTR
DVD
REC/OTR
VCR
Sugerencia 2: Edite el disco grabado
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
La edición de discos es fácil. Esta unidad ofrece convenientes funciones de
edición que sólo son posibles con discos DVD-RW/R.
Puede editar lo siguiente de la lista de títulos.
• Poniendo nombres en títulos
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
DUBBING
AUDIO
• Seleccionando imágenes para índices
• Seleccionando/borrando marcadores de capítulos
• Borrado de títulos o escenas
(Las funciones editables dependen del modo de grabación y forma de edición.)
Original y Playlist (modo VR)
Puede editar las grabaciones en la lista a reproducir sin cambiar las grabaciones
originales. Cualquier lista a reproducir no ocupa mucho espacio en el disco.
Escrit de datos
90%
(Aparece sólo en el modo VR)
¿Qué significa “Original” o “Playlist”?
A lo largo de este manual encontrará Original y Playlist que se refieren a las gra-
baciones reales y la versión editada.
• La grabación Original se refiere a la grabación real en el disco.
• El Playlist se refiere a la versión editada del disco; cómo se va a reproducir la
versión Original.
Finalización de un disco
• Para reproducir el disco en un reproductor DVD diferente, grabe el disco en
el modo de vídeo y finalizelo.
C
• Después de finalizar un disco grabado en el modo de vídeo, usted no podrá
editar ninguna información que se encuentre en este disco.
• Para un disco grabado en el modo VR, la edición podrá realizarse incluso
después de la finalización.
Esta operación puede
demorar en completarse.
ES 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Español
Reproducción con videograbadora
VCR
1
POWER
OPEN/CLOSE
TIMER PROG.
T-SET
Presione [POWER] en el mando
a distancia o el panel frontal de
la unidad.
1
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
Cuando reproduzca una cinta,
conecte el TV y asegúrese de
seleccionar la entrada donde se
conecta la unidad.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
TOP MENU MENU/LIST RETURN
VCR
Presione:
2
REC/OTR
DVD
REC/OTR
VCR
Coloque una cinta pregrabada y
presione [PLAY B] para empe-
zar la reproducción.
2
4
5
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
CM SKIP
ZOOM
SKIP
SLOW
SEARCH
3
DUBBING
AUDIO
3
Durante la reproducción, pre-
sione [PAUSE F].
Se hará una pausa de
reproducción y se silenciará el
sonido.
4
Presione [PLAY B] para con-
tinuar la reproducción.
5
Presione [STOP C] para detener
la reproducción.
6
Presione [STOP C / EJECT A]
en el panel frontal de la unidad
para expulsar la cinta.
Nota
• Cuando se coloca una cinta
sin la lengüeta de grabación,
la unidad empezará a
reproducir automáticamente.
El seguimiento se ajustará
automáticamente para la
reproducción. Para ajustar
manualmente el seguimiento,
presione [CHANNEL L / K]
en el panel frontal de la unidad
o los botones [CH K / L] en el
mando a distancia.
•
86 ES
Download from Www.Somanuals.com. All Manuals Search And Download.
Español
Grabación y grabación con temporizador de un toque (VCR)
Grabación
TOP MENU MENU/LIST RETURN
ENTER
VCR
1
Antes de grabar, asegúrese de
que:
Presione [REC/OTR] (VCR) para
empezar la grabación.
REC/OTR
DVD
REC/OTR
VCR
1
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
• Se seleccionó el canal deseado
presionando los botones
numéricos en el mando a
distancia o [CHANNEL L / K]
en el panel frontal de la unidad.
• Hay una cinta con la lengüeta
para grabación intacta en la
unidad.
• Se seleccionó la velocidad
de grabación deseada en SP
(reproducción estándar) o
SLP (reproducción de super
larga duración) presionando
[REC SPEED] en el mando a
distancia.
Para detener temporalmente la
grabación o continuarla, presione
[PAUSE F]. Después de que la
unidad haya estado en el modo
de pausa durante 5 minutos, se
detendrá automáticamente para
proteger al cinta y el cabezal de
video contra cambios.
SKIP
CM SKIP
ZOOM
SKIP
1
2
SLOW
SEARCH
DUBBING
AUDIO
Nota
• Para ver un canal mientras
graba en otro
1) Mientras está grabando en la
unidad, presione [VIDEO/TV].
ꢀ) En la caja de cable o caja
de satélite, seleccione el
canal que desea ver.
Si se conectó la unidad a
una caja de cable o caja de
satélite, consulte la sección
de “Connection to a cable box
or satellite box” en la página
15.
2
Presione [STOP C] cuando se
complete la grabación.
Velocidad de grabación:
Prevención contra borrado accidental
Velocidad
de la cinta
Tiempo de
grabación/reproducción
Para evitar una grabación
por accidente en un casete
grabado, rompa la lengüeta
de grabación. Para volver a
Tipo de cinta
Modo SP
T60
T1ꢀ0
ꢀ horas ꢀ-ꢀ/3 horas
6 horas 8 horas
T160
1 hora
3 horas
Modo SLP
Lengüeta de
grabar posteriormente, cubra
grabación
• Se selecciona Estéreo o SAP.
el orificio con cinta adhesiva.
Grabación con temporizador de un toque (OTR)
Para cambiar la longitud de
tiempo durante la grabación
VCR
Esta función permite seleccionar
la longitud de la grabación
simplemente presionando [REC/
OTR] (VCR) en el mando a
distancia o [VCR RECORD] en el
panel frontal de la unidad.
con temporizador de un toque,
presione repetidamente [REC/
OTR] (VCR) hasta que aparezca
la longitud deseada.
REC/OTR
DVD
REC/OTR
VCR
1
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
SKIP
SKIP
Para cancelar la grabación con
temporizador de un toque dentro
del tiempo especificado, presione
[STOP C].
SLOW
CM SKIP
SEARCH
1
1
Durante la grabación normal,
presione [REC/OTR] (VCR) para
empezar la grabación con tem-
porizador de un toque.
Nota
Puede seleccionar un tiempo de
grabación determinado presionando
repetidamente [REC/OTR] (VCR).
• El tiempo de grabación remanente aparecerá en la pantalla durante
una grabación con temporizador de un toque.
Presione [DISPLAY] para que aparezca en la pantalla de TV.
• No puede hacer una pausa en una grabación con temporizador
de un toque.
• Si se termina el OTR en la videograbadora durante el modo de
reproducción o REC en DVD, la videograbadora estará en el modo
STOP y la DVD se mantiene en el modo actual.
• A diferencia de una grabación con temporizador, durante una
grabación con temporizador de un toque usted puede realizar las
operaciones siguientes.
(0:30)
(1:00)
(Canal a grabar)
(8:00)
(7:30)
Cuando termina la grabación
con temporizador de un toque,
la unidad se desconectará
automáticamente.
- Desconectar la alimentación
- Utilizar [REC/OTR] (VCR) o [STOP C].
ES 87
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year
from the date of original retail purchase. Certain parts are excluded from this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from
the date of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original
retail purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized service center. This limited warranty does not
apply to any product not purchased and used in the United States.
This product is produced for home use and this warranty only covers failures due to defects in material
or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or
failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage
which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation,
improper maintenance, commercial use such as hotel, rental or office use of this product or damage which
results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT
REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR
MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR
ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED
BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE
PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS
MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID
WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD,
YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE
CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid,
in either its original packaging or packaging affording an equal degree of protection, to any
AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done
by unauthorized service providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,
please contact us at:
FUNAI CORPORATION
Customer Service
Tel :1-800-605-8453
19900 Van Ness Avenue, Torrance, CA 90501
Printed in China
1VMN22804 / E9A11UD ★★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Connections
(Back of TV)
VIDEO
AUDIO IN
[Cable Box or Satellite Box]
O
U
T
IN
4
3
Connect
Connect
Video
cable
Audio
cable
(supplied)
From Cable or
Satellite Company
OR
OR
(supplied)
2
1
Indoor or
Outdoor Antenna
DVD
DVD/VCR
OUT
Connect
COMPONENT
DIGITAL
AUDIO S-VIDEO
S-VIDEO
Connect
IN
-
AUDIO
-
ANTENNA
IN
VIDEO OUT
AUDIO OUT
OUT
Y
L
L
RF
L
R
R
PB
OUT
IN
/CB
cable
COAXIAL
IN
-
VIDEO
-
OUT
R
PR
/CR
(supplied)
From Cable
Company
(No Cable Box)
O
Playable discs
Disc
This unit is compatible to play the following discs.
(Back of this unit)
Logo
Disc
Logo
DVD-VIDEO
CD-DA (AUDIO CD)
Watching TV/DVD
After you have completed connections;
DVD-RW (VIDEO/VR mode)
DVD-R (VIDEO mode)
CD-RW (CD-DA FORMAT)
CD-R (CD-DA FORMAT)
Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input
channel (usually near channel 0) for viewing the picture from this unit.
Please refer to “Input Mode Names for Common TV Brands” on page 15 of the Owner's manual or the manual accompanying
your TV.
2 – 1 Initial Setting
2. Press [ENTER] on Channel Preset.
The unit will start getting channels
available in your area.
3. Clock Setting menu will appear.
Press [ENTER] twice, default date
will appear.
1. Turn on the TV and the unit in the
first time. “Initial Setting” will appear.
Using [K / L], select your desired
language for the OSD. Then press
[ENTER] to go to next step.
is a trademark of DVD Format/Logo Licensing Corporation.
I DVD+R/+RW discs can be played back only on this unit.
Initial Setting
Initial Setting
CH 1
English
Français
Español
Region codes
Auto Presetting Now
JAN/ 01 / 2006(SUN)
12: 00 AM
The number inside the globe refers to region of the world.
This unit can play DVDs that are labeled for ALL regions or for Region 1.
6. Press [K / L] to select “AM” or
4. Using [K / L], enter the date
(month / day / year).
Press [{ / B] to move the cursor.
5. Using [K / L], enter the time
(hour / minute). Press [{ / B].
A cursor will move on AM.
“PM”. Press [ENTER].
TV Program will automatically
appear.
Recordable discs
This unit can record to DVD-R and DVD-RW discs.
DVD-R discs can only be recorded to once, and cannot
be erased. DVD-RW discs can be recorded to and erased
many times.
DVD-R discs can only be recorded in Video mode, while
DVD-RW discs can select a recording format between Video
mode and VR mode.
Initial Setting
Initial Setting
• We strongly recommend using any DVD-R 8x,
MAXELL DVD-R 16x and DVD-RW 4x disc to assure
good recording quality.
Playing, recording, and editing discs
are available on this unit.
FEB/ 01 / 2006(WED)
12: 00 AM
FEB/ 01 / 2006(WED)
12: 00 AM
• Discs that tested and proven to be compatible with
this recorder:
VERBATIM DVD-R 8x VERBATIM DVD-RW 2x
MAXELL DVD-R 16x
JVC DVD-RW 4x
2 – 2 DVD Playback
Disc type
Disc format
Video mode
Video
Functions
Attributes
DVD
Playing, limited recording,
limited editing
Press [POWER] to
Press [OPEN/CLOSE A]
to close the disc tray.
Press:
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB) (for 12cm)
turn the unit on.
DVD-RW
Press [OPEN/CLOSE A]
VR mode
VR
Playing, recording,
Original/Playlist editing
to open the disc tray.
Press [PLAY B].
Playback will start.
• Some discs may start
playback automatically.
180 minutes (1.4GB) (for 8cm)
POWER
T-SET
OPEN/CLOSE
TIMER PROG.
Insert a disc.
DVD-RW: 1-4x
DVD-R: 2x.4x.8x
DVD-RW
.@/:
1
ABC
2
DEF
3
REC/OTR
DVD
REC/OTR
SKIP
VCR
SKIP
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB) (for 12cm)
Video mode
CH
GHI
4
JKL
5
MNO
6
Playing, limited recording,
limited editing
PLAY
REC SPEED
x1.3/0.8
DVD-R
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
PAUSE
disc tray
guide
180 minutes (1.4GB) (for 8cm)
Follow to the back side of this sheet.
Download from Www.Somanuals.com. All Manuals Search And Download.
3 – 2
Timer Recording
3
DVD Recording
• You can set up to 8 programs (once, daily or weekly).
• Be sure to set the clock before starting a timer programming.
DVD
First:
3 – 1 Easy Recording
Press [TIMER PROG.].
Timer Programming list appears.
How to select the recording speed:
Select the recording
speed.
Select any blank line with [K / L] and press [ENTER].
Recording Recording
Video/Sound
Quality
7
8
SPACE
0
9
Disc Size
Timer Programming
VCR DVD
speed
time
DISPLAY
CLEAR
SETUP
ENTER
DVD
VCR
Date
---
Start
End
CH
Speed
1.
2.
3.
4.
5.
6.
7.
8.
POWER
OPEN/CLOSE
TIMER PROG.
(good)
TOP MENU MENU/LIST RETURN
XP (1H)
SP (2H)
LP (4H)
18 min
T-SET
---
---
REC/OTR
DVD
REC/OTR
VCR
36 min
72 min
.@/:
1
ABC
2
DEF
3
---
8cm Disc
---
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
---
GHI
4
JKL
5
MNO
6
EP (6H) 108 min
SLP (8H) 144 min
SEP (10H) 180 min
---
SKIP
SKIP
---
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
REC/OTR
DVD
REC/OTR
VCR
SLOW
SEARCH
(poor)
(good)
60 min
120 min
240 min
360 min
480 min
600 min
XP (1H)
SP (2H)
LP (4H)
EP (6H)
SLP (8H)
SEP (10H)
12cm Disc
Set the date.
Select the desired
channel.
When pressing
at the current date, Timer
Timer Programming
VCR DVD
DVD
Recording mode will change as follows:
e.g. January 1st at present
(poor)
Date
Start
--:--
End
--:--
CH
Speed
VCR
POWER
OPEN/CLOSE
1. JAN/01
L1 DVD
T-SET
TIMER PROG.
2.
3.
---
---
JAN/01
.@/:
1
ABC
2
DEF
3
Daily
CH
GHI
4
JKL
5
MNO
6
Move to next
MON-SAT
MON-FRI
SAT
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
Set start and end time.
Press repeatedly to select desired recording time.
DISPLAY
SPACE
0
CLEAR
SETUP
ENTER
Timer Programming
VCR DVD
Recording times appear on the TV screen
(30 minutes to 8 hours).
DVD
VCR
Date
Start
End
--:--
CH
L1 DVD
Speed
TOP MENU MENU/LIST RETURN
1. JAN/01 12:57AM
FRI
2.
3.
---
---
Recording will start.
SUN
Move to next
JAN/31
I
0:30
REC/OTR
DVD
REC/OTR
VCR
Select the channel number to record.
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
0:30
(Normal Recording) 1:00
Record on DVD disc.
Timer Programming
VCR DVD
Set the Timer Standby mode
Press [T-SET] to turn the unit off.
DVD
VCR
Date
Start
End
CH
8
Speed
SKIP
SKIP
1. JAN/01 12:57AM 1:57AM
DVD
2.
3.
---
---
SLOW
CM SKIP
SEARCH
8:00
7:30
REC/OTR
DVD
REC/OTR
VCR
POWER
OPEN/CLOSE
TIMER PROG.
Move to next
T-SET
PLAY
PAUSE
STOP
REC SPEED
x1.3/0.8
When the unit reaches the specified time,
the unit will be turned off automatically.
.@
ABC
2
DEF
3
Select the media to record.
SKIP
SKIP
Timer Programming
VCR DVD
CH
4
JKL
5
MNO
6
DVD
VCR
SLOW
CM SKIP
SEARCH
Date
Start
End
CH
8
Speed
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SETUP
1. JAN/01 12:57AM 1:57AM
DVD
2.
3.
---
---
DISPLAY
SPACE
0
CLEAR
After all recordings, finalize your disc.
Move to next
indicator will appear on the front panel display.
After recording, you must finalize the disc in order to play on other
units.
DVD
Select the recording speed.
Timer Programming
VCR DVD
DVD
VCR
Date
Start
End
CH
8
Speed
1H
Stop the recording.
Finalizing*
1. JAN/01 12:57AM 1:57AM
DVD
2.
3.
---
---
REC/OTR
DVD
REC/OTR
VCR
Playable
Hints for DVD Recording
OPEN/CLOSE
A
POWER
REW
F
.FWD STOP/EJECT PLA
Y
DUBBING
STOP
PLA
Y
PLAY
PAUSE
STOP
E
D
C
A
B
C
B
REC SPEED
x1.3/0.8
OUTPUT SELECT
VCR
L
CHANNEL
K
DVD
-
S VIDEO
VIDEO
L AUDIO R
- -
REPEA
T
TRK.
DVD
VCR
s
B
DVD
I Formatting is not needed when inserting a blank
disc. UNIT AUTOMATICALLY PREPARES THE
DISC FOR RECORDING.
I For playback on other DVD players, be sure to
record in Video mode and to finalize the disc once
recording is finished. OTHER PLAYER MUST
PLAY BACK DVD-R or DVD-RW.
B
RECORD
RECORD
SKIP
CM SKIP
ZOOM
SKIP
This Unit
DVD player
Set the Timer Program.
TOP MENU MENU/LIST RETURN
ENTER
SLOW
SEARCH
Not Playable
DUBBING
AUDIO
Timer Recording
is now set.
* You cannot finalize discs in other DVD recorders.
1VMN22805 / E9A11UD_QG ★★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Sennheiser Radio EK 2000 IEM User Manual
Sharp Calculator EL 500W User Manual
Shiro Telephone SB3125 User Manual
Sony Blu ray Player HBD E370 E470 E570 E870 T57 User Manual
Sony Ericsson Cell Phone K810i User Manual
Sony MP3 Player SRF X90 User Manual
SpectraLink Telephone LINK 6020 User Manual
Standard Horizon Fish Finder Hx500s User Manual
Tanaka Edger TPE 2501 User Manual
T Fal Gas Grill Use Grill Panini Maker User Manual