24 inch DVD TRIPLE COMBO
Owner’s Manual
6724FDG
FEATURES
• Auto Channel Programming
• Timer Recording
1 year 8 events programmable
Daily/Weekly recording
• One Touch Recording
• Auto Clock Setting
• Screen Saver
• Auto Power On and Off
• Parental Lock
• Resume Play (DVD)
• Closed Caption Decoder
• Virtual Surround
SUPPLIED ACCESSORIES
This unit comes with the following accessories. Please confirm that
all the accessories are included.
Owner's Manual
P Remote Control
P AA batteries x 2
P Owner's Manual
(NF101UD)
(1EMN21639)
INSTRUCCIONES EN ESPAÑOL INCLUDAS
PLEASE READ BEFORE USING THIS EQUIPMENT
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING
AFTER READING OWNER’S MANUAL,
PLEASE CALL TOLL FREE 1-800-968-3429 OR VISIT OUR WEB SITE AT
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Lightning - For added protection for this unit receiver during
a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the unit due to lightning and power-line surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other elec-
tric light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind
into this unit through openings as they may touch dangerous
voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the unit.
18. Servicing - Do not attempt to service this unit yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified ser-
vice personnel.
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operat-
ing instructions. Adjust only those controls that are covered
by the operating instructions, as improper adjustment of
other controls may result in damage and will often require
extensive work by a qualified technician to restore the unit to
its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performance, this
indicates a need for service.
20. Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same character-
istics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other haz-
ards.
21. Safety Check - Upon completion of any service or repairs to
this unit, ask the service technician to perform routine safety
checks to determine that the unit is in proper operating con-
dition.
22. Heat - This unit product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
19. Damage Requiring Service - Unplug this unit from the wall
outlet and refer servicing to qualified service personnel
under the following conditions:
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellec-
tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the
owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or
modification is made.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
LASER SAFETY
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service
this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU'AU FOND.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guide-
lines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system
of the building as close to the point of cable entry as practical.
LOCATION
For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place
for its installation:
• Shield it from direct sunlight and keep it away from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the
top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
• Install unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the unit near strong magnetic fields.
• Avoid moving unit to locations where temperature differences are extreme.
• Be sure to remove disc and unplug the AC power cord from the outlet before carrying the unit.
TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our
Authorized Service Center for servicing.
• Do not put your fingers or objects into the unit disc loading tray.
• Do not place anything directly on top of the unit.
MOISTURE WARNING
• Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or
after heating a cold room or under conditions of high humidity. If you play a videotape or DVD in a moist
unit, it may damage the tape or DVD and the unit. When the condensation occurs inside the unit, turn the
unit on and leave it at least 2 hours to dry out.
NOTE ABOUT RECYCLING
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-
tions concerning chemical wastes.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
The serial number of this product may be found on the back of the unit. No other unit has the same serial
number as yours. You should record the number and other vital information here and retain this book as a
permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
ABLE OF CONTENTS
T
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . .2
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . .5
SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . .5
PREPARATION FOR USE . . . . . . . . . . . . . . . . . .6
ANTENNA/CABLE CONNECTIONS . . . . . . . . . . . .6
CONNECTING TO AN EXTERNAL DEVICE (FRONT) . .6
CONNECTING TO A DIGITAL AUDIO DEVICE (REAR) .7
INSTALLING THE BATTERIES IN REMOTE CONTROL .7
OPERATING CONTROLS AND FUNCTIONS . . .8
DVD SECTION
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . .22
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . .22
UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . .22
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . .23
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .23
DISC MENU / TITLE MENU . . . . . . . . . . . . . . . . . .23
SPECIAL PLAYBACK FUNCTIONS & SETTINGS . . .24
FUNCTION TABLE . . . . . . . . . . . . . . . . . . . . . . . .24
AUDIO MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . .25
ANGLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
BLACK LEVEL MENU . . . . . . . . . . . . . . . . . . . . . .26
V.S.S. (Virtual Surround System) . . . . . . . . . . . . . .26
SEARCH MENU . . . . . . . . . . . . . . . . . . . . . . . . . .26
REPEAT PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .27
PROGRAMMED PLAYBACK . . . . . . . . . . . . . . . . .28
RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . .28
ON-SCREEN INFORMATION . . . . . . . . . . . . . .28
CHANGING THE DVD SET UP ITEMS . . . . . . .29
CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . .29
INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . .32
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . .34
APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
CABLE CHANNEL DESIGNATIONS . . . . . . . . . . .35
LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . .35
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . .36
TV/VCR SECTION
TV OPERATION AND SETTINGS . . . . . . . . . . . .9
WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . .9
SLEEP TIMER / PICTURE CONTROL . . . . . . . . . . .9
CLOCK SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .10
DAYLIGHT-SAVING TIME . . . . . . . . . . . . . . . . . . .11
ON-SCREEN MENU LANGUAGE . . . . . . . . . . . . .11
CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . .11
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .12
CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . .13
ON-SCREEN DISPLAY . . . . . . . . . . . . . . . . . . .14
STATUS DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . .14
CHECKING THE STATUS . . . . . . . . . . . . . . . . . . .14
MTS (Multi-channel Television Sound) SYSTEM . .14
VIDEO CASSETTE . . . . . . . . . . . . . . . . . . . . . .15
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .15
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . .16
RENTAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .16
AUTO REPEAT PLAYBACK . . . . . . . . . . . . . . . . . .16
SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . .16
ZERO RETURN . . . . . . . . . . . . . . . . . . . . . . . . . . .16
PICTURE SEARCH . . . . . . . . . . . . . . . . . . . . . . . .17
TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . .17
INDEX SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . .17
RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . .18
NORMAL RECORDING . . . . . . . . . . . . . . . . . . . . .18
OTR (One Touch Recording) . . . . . . . . . . . . . . . . .18
AUTOMATIC TIMER RECORDING . . . . . . . . . . . .19
AUTO RETURN . . . . . . . . . . . . . . . . . . . . . . . . . . .21
AUTO REWIND-EJECT . . . . . . . . . . . . . . . . . . . . .21
COPYING A VIDEO CASSETTE (from another source) .21
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . .37
WARRANTY . . . . . . . . . . . . . . . . . .BACK COVER
SYMBOLS USED IN THIS MANUAL
The following symbols below appear in some headings and notes in this manual, with the following meanings.
Description refers to TV/VCR
operation (in the TV/VCR mode).
Description refers to playback of
audio CDs (in the DVD mode).
Description refers to playback of
DVD video discs (in the DVD mode).
Description refers to the items
to be set by the QUICK mode
(in the DVD mode).
QUICK
5
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
REPARATION FOR USE
P
ANTENNA/CABLE CONNECTIONS
Plug the incoming cable into the ANT. jack on the rear of the unit.
If your cable service supplies you with a converter box or if you use a satellite system, connect the box with
this unit as shown below.
Cable
TV signal
Antenna
or
ANT.
A
U
D
I
O
O
U
T
COAXIAL
Rear of the unit
Incoming cable from home
Antenna / Cable Company
(No Cable Box)
ANT.
Cable Box or Satellite Box*
*NOTE
OUT
OR
IN
(DO NOT DISCONNECT FROM BOX)
Some cable TV systems use scrambled
signals and require a special converter to
receive these channels. Consult your local
cable company.
Incoming cable from Cable Company
or Satellite Antenna
NOTE:
Bent pin
For your safety and to
avoid damages to the unit,
unplug the antenna cable
from the ANT. jack before
moving the unit.
Before plugging the antenna into
the ANT. jack of the unit, check
that the pin is not bent. If it is bent,
straighten the pin as illustrated,
then plug the pin into the ANT. jack
of the unit.
Cable
Plug
(Needs to be
straightened)
(Straight pin)
CONNECTING TO AN EXTERNAL DEVICE (FRONT)
When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.
AUX
Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEO
jacks of this unit.
Then use [SELECT] or [CH. K / L] until "AUX" appears on the screen.
STOP
EJECT
HEADPHONE
POWER
SELECT
VIDEO
L
AUDIO
R
VOLUME
SKIP
PLAY SKIP
STOP
OPEN/CLOSE
CHANNEL
REC/OTR
REW
PLAY
F.FWD
SEARCH
DVD
TV/VCR
ex.
VCR or video
camera, etc.
To the Audio output jacks
Audio Cable (commercially available)
(IN)
(OUT)
(OUT)
HEADPHONE
–
–
VIDEO
L
AUDIO
R
Front of the unit
To the Video output jack
Video Cable (commercially available)
(IN)
NOTE:
When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural VCR
(another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
CONNECTING TO A DIGITAL AUDIO DEVICE (REAR)
You can connect this unit to a digital audio device to enjoy the digital audio of DVD. Connect to an amplifier
equipped with digital input jacks, such as MD deck or DAT deck. To play a DVD disc in a Dolby Digital Multi-
channel surround format in this unit, connect to a Dolby Digital decoder.
Use an audio coaxial digital cable (commercially available) for the audio connections.
ANT.
AUDIO OUT
COAXIAL
AUDIO OUT
COAXIAL
To AUDIO OUT
COAXIAL jack
(DVD AUDIO
OUT only)
(OUT)
Dolby Digital
decoder
To Coaxial digital
Audio input jack
(IN)
or
Audio coaxial digital cable
(commercially available)
MD deck,
DAT deck, etc.
To Coaxial digital
Audio input jack
(IN)
NOTES:
• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an
MD or DAT deck.
• Be sure to turn off the power to all devices in the system before connecting another device.
• Refer to the Owner's Manuals for the devices to be connected to the unit.
• To connect to a MD or DAT deck, set "DOLBY DIGITAL" to "PCM" for the audio output in the setup mode, and to con-
nect to a Dolby Digital decoder, set to "BITSTREAM" (Refer to "AUDIO SETTING" on page 30). Playing a unit using
incorrect settings may generate noise distortion and may also damage the speakers.
INSTALLING THE BATTERIES IN REMOTE CONTROL
1) Open the battery compartment cover by pressing
[BATTERY PRECAUTIONS]
the cover on the remote unit in the direction of
the arrow.
2) Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
Be sure to follow the correct polarity as indicat-
ed in the battery compartment. Reversed batter-
ies may cause damage to the device.
•
•
•
•
Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
3) Replace the cover.
If the device is not to be used for a long period
of time, remove the batteries to prevent damage
or injury from possible battery leakage.
1
2
3
Do not try to recharge batteries not intended to
be recharged; they can overheat and rupture.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
PERATING CONTROLS AND FUNCTIONS
O
- FRONT PANEL -
DVD butttons
TV/VCR bbuttons
STOP
HEADPHONE
POWER
SELECT
VIDEO
L
AUDIO
R
VOLUME
SKIP
PLAY SKIP
STOP
OPEN/CLOSE
CHANNEL
REC/OTR
REW
PLAY F.FWD
EJECT
SEARCH
DVD
TV/VCR
1
2
3
4
3
5
6
7 8 9 10 11 12 13 14 4 15 16 17 18 19 20 21
17 Remote sensor window
18 HEADPHONE Jack
- REMOTE CONTROL -
19 VIDEO input Jack [P.6]
20 AUDIO L/R input Jacks [P.6]
21 Cassette compartment
POWER
PICTURE/
REC
CH.
SLEEP
SELECT
22
23
34
35
[REMOTE CONTROL]
1
4
3
6
9
2
5
8
24
36
22 POWER Button [TV/VCR P.9 / DVD P.23]
23 PICTURE/SLEEP Button [TV/VCR P.9]
24 Number Buttons [TV/VCR P.9 / DVD P.26]
25 DISPLAY Button [TV/VCR P.14 / DVD P.28]
26 SPEED Button [TV/VCR P.18]
7
VOL.
DISPLAY
+100
37
0
+10
25
SET-UP
MUTE
SPEED
TV/VCR Audio
27 TV/VCR Audio Button [TV/VCR P14]
28 PLAY B Button [TV/VCR P.15 / DVD P.23]
29 REV E Button [TV/VCR P.15 / DVD P.23]
SKIP H Button [DVD P.26]
30 PAUSE F Button [TV/VCR P.15 / DVD P.23]
31 TITLE Button [DVD P.23]
32 CLEAR Button [TV/VCR P.9 / DVD P.26]
33 MODE Button [DVD P.24]
34 REC Button [TV/VCR P16]
35 SELECT Button [TV/VCR P.9]
26
27
28
29
38
39
PLAY
FWD
REV
40
41
STOP
SLOW
PAUSE
TITLE
DISC MENU
RETURN
30
31
32
42
43
44
ENTER
CLEAR
MODE
45
33
K
L
36 CH.
/
Buttons [TV/VCR P.9]
Buttons [TV/VCR P.9]
X
Y
37 VOL.
/
[FRONT PANEL]
38 MUTE Button [TV/VCR P.9]
01 POWER Button [TV/VCR P.9 / DVD P.23]
39 SET-UP Button [TV/VCR P.10 / DVD P.29]
40 FWD D Button [TV/VCR P.15 / DVD P.23]
SKIP G Button [DVD P.26]
K
L
02 VOLUME
/
Buttons [P.9]
03 SKIP H / G Buttons [DVD P.26]
SEARCH E / D Buttons [DVD P.23]
41 STOP C Button [TV/VCR P.15 / DVD P.23]
42 DISC MENU Button [DVD P.23]
04 PLAY B Button [TV/VCR P.15 / DVD P.23]
05 STOP C Button [TV/VCR P.15 / DVD P.23]
06 OPEN/CLOSE A Button [DVD P.23]
07 Disc loading tray
43 ENTER Button [TV/VCR P.10 / DVD P.23]
K
L
44
/
/{ / B Buttons [TV/VCR P.9 / DVD P.23]
45 RETURN Button [TV/VCR P.10 / DVD P.25]
08 DVD Indicator
NOTES:
09 SELECT Button [TV/VCR P.9]
10 TV/VCR Indicator
• We do not recommend the use of universal remote con-
trols as it may not control all the functions. Note that the
code number given by universal remote controls may
not program with this unit. For more details, contact the
manufacturer of the universal remote control.
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
K
L
11 CHANNEL
/
Buttons [TV/VCR P.9]
12 Recording Indicator
13 REC/OTR Button [TV/VCR P.18]
14 REW E Button [TV/VCR P.15]
15 F.FWD D Button [TV/VCR P.15]
16 STOP/EJECT C A Button [TV/VCR P.15]
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
TV/VCR SECTION
V OPERATION AND SETTINGS
T
WATCHING A TV PROGRAM
SLEEP TIMER / PICTURE CONTROL
You can set Sleep Timer and picture
adjustment with [PICTURE / SLEEP].
1 After antenna or cable connection is
completed, connect the power cord into
a standard AC outlet.
TV/VCR
• The menu changes as described below every time
you press [PICTURE / SLEEP].
Sleep Timer
BRIGHT
CONTRAST
COLOR
2 Press [POWER] to turn on the unit.
K
L
] or the Number buttons to
3 Use [CH.
/
SHARPNESS
TINT
select your desired channel number.
To use the number buttons
•Single digit channels: (Ex. 02, 03, 04 and so on)
Press [0] first to select a single digit channel.
SLEEP TIMER SETTING
The Sleep Timer function is used to turn off the
unit without pressing [POWER] after a desired time.
•Two digit channels: (Ex. 12, 38, 95 ...)
Press two digits directly.
•Three digit channels: (Ex. 115, 125 ...)
Press [+100] first, then press the last two digits.
1 Press [PICTURE / SLEEP] to
SLEEP 0 MINUTE
display the Sleep Timer menu.
2 Within 5 seconds, set your desired sleep time
X
Y
] to adjust the volume.
using [s / B].
4 Use [VOL.
/
Press [MUTE] to instantly
mute the sound. Press it again
to restore the previous sound
level.
• [B]...Increase by 30 min. (Up to 120 min.)
• [s]...Decrease by 30 min.
VOLUME 20
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
NOTE:
• To cancel the Sleep Timer, use [CLEAR] or [s / B]
NOTE:
to set the time to "0".
• Even if you turn off the unit in the DVD mode, the unit
will be in the TV/VCR mode when you turn it on again.
3 To confirm the remainder time to shutdown,
press [PICTURE / SLEEP].
TO WATCH CABLE OR SATELLITE CHANNEL
PICTURE CONTROL
If the unit is connected to a cable box or satellite
box, use [CH. K / L] to select CH3 or CH4 accord-
ing to the output channel setting of the device and
select desired channel on that device.
1 Press [PICTURE / SLEEP]
BRIGHT
–
P
P
P
P
P
P
P
C
P
P
P
P
P
P
P +
repeatedly until desired control
is displayed.
TO WATCH EXTERNAL INPUT
2 Use [s / B] to adjust to your desired level within
5 seconds.
When an external equipment is
connected to the front AUDIO/
VIDEO input jacks, press
[SELECT] or [CH. K / L] repeat-
edly until "AUX" appears on the
BRIGHT
to decrease brightness to increase brightness
AUX
CONTRAST to decrease contrast to increase contrast
COLOR
TINT
SHARPNESS to soft
to pale
to brilliant
to green
to clear
screen.
to purple
NOTE:
• If there is no signal input from the antenna terminal
and no operation for 15 minutes, the unit will turn
itself off automatically.
• Even if any power failure occurs, the unit will
retain its memory for this feature.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
TV/VCR SECTION
TV OPERATION AND SETTINGS
AUTOMATIC CLOCK SETTING
CLOCK SET UP
NOTES:
Set the unit clock correctly for VCR timer
recording. We suggest that you should
TV/VCR
• If a cable converter box is being used, make sure it is
turned on.
set the clock manually when you first set up the
unit, then set the auto clock setting to "ON" to cor-
rect the time periodically.
• You must use the remote control for the clock setting.
• If the unit is connected directly to a cable converter
box or satellite box, the local PBS station must be
selected on the cable box itself and the unit must be
set to the output channel of the cable converter box
or satellite box (usually channel 3 or 4), to enable to
set up or correct the clock automatically.
NOTE:
• If you cannot receive a station with time signals, auto
clock setting is not available. Use manual setting only.
MANUAL CLOCK SETTING
1 Press [SET-UP].
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
B
Using [K / L] select "SETTING
In the example below, the clock is to be set to:
CLOCK", then press [ENTER].
DATE:
May 5th, 2006
5:40PM
SETTING TIME:
– SETTING CLOCK –
2 Press [ENTER] to select "ON".
B
AUTO CLOCK
[ON]
AUTO CLOCK CH SEARCH
1 Press [SET-UP].
Use [K / L] to point to
"SETTING CLOCK", then
press [ENTER].
- TV/VCR SETUP -
AUTO CLOCK CH
[ 02 ]
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B
3 Press [L] to select
– SETTING CLOCK –
AUTO CLOCK
[ON]
"AUTO CLOCK CH SEARCH".
Then press [ENTER].
B
AUTO CLOCK CH SEARCH
– SETTING CLOCK –
2 Use [K / L] to point to
"MANUAL CLOCK SET", then
press [ENTER].
AUTO CLOCK CH
[ 02 ]
AUTO CLOCK
[ON]
• The unit begins searching for
the station which contains the
auto clock set signal. The
search for a signal may take up
to 20 seconds per channel.
AUTO CLOCK CH SEARCH
AUTO CLOCK CH
MANUAL CLOCK SET
D.S.T.
[ 02 ]
B
• If there is no local PBS station in
your area or on your cable sys-
tem, select "AUTO CLOCK" and press [ENTER]
[OFF]
– AUTO CLOCK CH SEARCH –
08
10
13
to turn "OFF" the function before this step.
• When the search has finished,
"_ _" appears at the lower left of
the screen.
_ _
– MANUAL CLOCK SET –
3 Use [K / L] to set your
desired month, day, year, hour
MONTH DAY
YEAR
NOTES:
0 5
/
:
0 5 FRI
2 0 0 6
and minute.
• During "AUTO CLOCK CH SEARCH", the picture
may be distorted.
HOUR
0 5
MINUTE
4 0 PM
Use [s / B] to move to
another item.
• If no number appears on the TV screen, there are no
stations in your area which contain the Auto Clock
signal. Auto Clock Setting is not possible. Please use
Manual Clock Setting on this page.
4 Press [SET-UP].
5:40 PM
Although seconds are not
displayed, they begin counting
from 00 when you press
[SET-UP]. Use this feature to
synchronize the clock with the correct time.
4 Write down the numbers that appear on the
screen. They are the auto clock stations in your
area.
5 Press [RETURN] to go back to
NOTE:
"SETTING CLOCK" menu.
– SETTING CLOCK –
• When unplugging the AC cord or if there is a power
failure for more than 3 seconds, you may have to
reset the clock.
AUTO CLOCK
[ON]
L
Press [ ] to select
AUTO CLOCK CH SEARCH
"AUTO CLOCK CH".
B
AUTO CLOCK CH
MANUAL CLOCK SET
D.S.T.
[ 08 ]
Use [s / B] until you locate an
auto clock station number.
[OFF]
TO CHANGE CLOCK SETTING
1 Follow steps 1 to 2 above.
6 Press [SET-UP] to exit the menu.
2 Select the item you want to change using [B].
3 Enter correct numbers using [K / L].
4 Press [SET-UP] to start the clock.
NOTE:
• Once the unit is turned off, it will periodically check
and set the correct date and time.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
DAYLIGHT-SAVING TIME
CLOSED CAPTION SYSTEM
Select this feature and the unit clock will
automatically advance one hour in April,
then reverse one hour in October.
You can view specially labeled (cc) TV
programs, movies, news and pre-recorded
tapes with either a dialogue caption or text display.
TV/VCR
• First Sunday of April : At 2 AM, the clock imme-
diately changes to 3 AM. Any timer programming
you have set to occur between 2 AM and 3 AM will
be canceled.
- TV/VCR SETUP -
1 Press [SET-UP].
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
Use [K / L] to point to
"CAPTION".
V-CHIP SET UP
LANGUAGE [ENGLISH]
B
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
• Last Sunday of October : At 2 AM, the clock
immediately changes to 1 AM.
INDEX SEARCH
V-CHIP SET UP
2 Press [ENTER] repeatedly to
select your desired caption
mode.
LANGUAGE [ENGLISH]
CAPTION [CAPTION1]
ZERO RETURN
1 Press [SET-UP].
B
- TV/VCR SETUP -
TIMER PROGRAMMING
TIME SEARCH
INDEX SEARCH
B
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
K
L
] to point to
Use [
/
"SETTING CLOCK", then
press [ENTER].
• CAPTION mode: You can watch dramas, movies and
news while captioning the dialogues and the contents
of news.
– SETTING CLOCK –
2 Use [K / L] to point to "D.S.T.".
AUTO CLOCK
[ON]
• TEXT mode: You can watch half screen text informa-
AUTO CLOCK CH SEARCH
tion if you want.
AUTO CLOCK CH
MANUAL CLOCK SET
D.S.T.
[ 02 ]
[ON]
*"CAPTION2" is usually used for a second language (if
available).
B
3 Press [SET-UP] to exit the menu.
3 Press [ENTER] to select "ON".
NOTES:
NOTE:
• Even if any power failure, the unit will retain its mem-
ory for this feature.
• To cancel the setting, select "OFF".
• Some programs are not broadcasted with closed
captions. The unit is designed to provide error-free
closed captions with high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
4 Press [SET-UP] to exit the menu.
• Common signal conditions which may cause caption
errors are listed below:
ON-SCREEN MENU LANGUAGE
- Electric motor brush noise
You can select the language of on-screen
menu among English, Spanish and French.
TV/VCR
- Weak snowy reception on TV screen
- Multiplex signal reception displaying picture
ghosts or airplane flutter
1 Press [SET-UP].
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
• If the unit displays a black box on
the TV screen, this means that
the unit is set to the TEXT mode.
To clear screen, select "CAP-
TION1", "CAPTION2" or "OFF".
Use [
K / L] to point to
"LANGUAGE".
B
TIME SEARCH
INDEX SEARCH
2 Press [ENTER] repeatedly to select "ENGLISH",
"ESPAÑOL" or "FRANÇAIS".
TO CANCEL THE CLOSED CAPTION SYSTEM
3 Press [SET-UP] to exit the menu.
1 Press [SET-UP]. Use [K / L] to point to
"CAPTION".
NOTES:
• This function effects only the language on the screen
menu and not the audio source.
2 Press [ENTER] repeatedly to select "OFF".
• If for some reason the menu is already in Spanish or
French, press [SET-UP], using [K / L] point to
"IDIOMA [ESPAÑOL]" or "LANGAGE [FRANÇAIS]",
then press [ENTER] repeatedly to select desired lan-
guage, then press [SET-UP].
3 Press [SET-UP] to exit the menu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
TV/VCR SECTION
TV OPERATION AND SETTINGS
A
TV RATING SET UP
V-CHIP SET UP
4 Use [K / L] to select a rating
This feature enables parents to prevent
their children from watching inappropriate
material on TV. When you try to access a blocked
program, “PROTECTED PROGRAM by ...” mes-
sage appears on the TV screen.
TV/VCR
B
TV–Y
TV–Y7
TV–G
TV–PG (
TV–14
TV–MA(
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
that you wish to block.
(
)
)
)
)
Press [ENTER] repeatedly to
set it to "BLOCK" or "VIEW".
(
Selection Rating Category Explanations
TV-Y
NOTE:
Appropriate for all children
Appropriate for children seven and older
General Audience
Parental Guidance suggested
Unsuitable for children under 14
Mature audience only
• To change the rating, the TV
must be turned to an unprotect-
ed program. If the screen on the
right is displayed, change the
channel to a station that is not
protected.
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
PROTECTED PROGRAM
by TV-Y
1 Press [SET-UP].
- TV/VCR SETUP -
NOTES:
TIMER PROGRAMMING
Use [
K / L] to select
• When you select a rating and set
it to "BLOCK", the higher ratings
will be blocked automatically.
The lower ratings will be avail-
able for viewing.
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
EO RU
TV–Y
TV–Y7
TV–G
TV–PG (DLSV)
TV–14 (DLSV)
TV–MA ( LSV)
[VIEW]
"V-CHIP SET UP", then press
[ENTER].
B
(
)
[VIEW]
B
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
2 Use the Number buttons to
ACCESS CODE
• When you set the lowest rating to
"VIEW", all other ratings will be automatically avail-
able for viewing.
enter the access code.
_
_
_
_
• For the first time set-up or in
the event the unit has lost
power, enter the default code of 0000.
5 The TV-Y7, TV-PG, TV-14 and
TV-MA ratings have the option
TV–Y
TV–Y7
TV–G
TV–PG (
TV–14
TV–MA(
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
3 Use [K / L] to select "TV RATING", "MPAA
RATING" or "CHANGE CODE", then press
[ENTER].
B
(
)
of sub rating categories.
Use [K / L] to select a rating
with sub-ratings, then press
[ENTER] twice.
)
)
)
(
Refer to the pages below to set up each item.
– V-CHIP SET UP –
6 Use [K / L] to select a sub-
rating, then press [ENTER] to
set it to "BLOCK" or "VIEW".
P 12
P 13
P 13
A
B
C
B TV RATING
MPAA RATING
CHANGE CODE
TV–PG
[BLOCK]
B
D
L
S
V
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
NOTE:
• The blocked sub-ratings will
appear next to the rating cate-
gory in the "TV RATING" menu.
TV–Y
TV–Y7
TV–G
TV–PG (DLSV)
TV–14 (DLSV)
TV–MA ( LSV)
[VIEW]
(
)
[VIEW]
[VIEW]
B
[BLOCK]
[BLOCK]
[BLOCK]
Selection Rating Category Explanations
TV-Y7
FV
Fantasy Violence
TV-PG, TV-14, TV-MA
D
L
Suggestive Dialog (TV-PG, TV-14 only)
Coarse Language
S
V
Sexual Situation
Violence
7 Press [SET-UP] to exit the menu.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
B
C
MPAA RATING SET UP
CHANGE ACCESS CODE
4 Use [K / L] to point to your
desired item, then press
[ENTER] to select "BLOCK"
or "VIEW".
4 Use the Number buttons to
enter your desired access
code in the "NEW CODE",
then enter the same code in
the "CONFIRM CODE". When
completed, the menu will
G
[VIEW]
PG
[VIEW]
NEW CODE
PG–13
R
NC–17
X
[VIEW]
B
[BLOCK]
[BLOCK]
[BLOCK]
X X X X
CONFIRM CODE
_
_
_
_
Selection Rating Category Explanations
return to "V-CHIP SET UP".
G
General Audience
PG
PG-13
R
Parental Guidance suggested.
Unsuitable for children under 13
Restricted; under 17 requires acco-
mpanying parent or adult guardian
No one under 17 admitted
5 Press [SET-UP] to exit the menu.
NOTE:
• Your personal access code will be erased and will
return to the default (0000) when a power failure
occurs or when you turn off the power using a wall
switch. If you forget the code, unplug the power cord
for 10 seconds to restore the access code to 0000.
NC-17
X
Mature audience only
5 Press [SET-UP] to exit the menu.
CHANNEL SET UP
Channel presetting is necessary at the start or in case you moved the TV to a different area.
AUTO CHANNEL PROGRAMMING
ADDING/DELETING CHANNELS
1 Press [SET-UP].
You can add channels that was not memorized due
to the bad reception status and also delete chan-
nels you no longer receive or seldom watch.
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
Use [K / L] to point to
B
"CHANNEL SET UP", then
press [ENTER].
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
1 Press [SET-UP].
Use [K / L] to point to
B
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
– CHANNEL SET UP –
2 Use [K / L] to point to "AUTO
CH PROGRAMMING", then
press [ENTER].
"CHANNEL SET UP", then
press [ENTER].
ADD / DELETE CH (CATV)
AUTO CH PROGRAMMING
B
The tuner scans and memorizes all the active
channels in your area.
– CHANNEL SET UP –
2 Use [K / L] to point to
"ADD/DELETE CH", then
press [ENTER].
B
ADD / DELETE CH (CATV)
AUTO CH PROGRAMMING
3 When the scanning is comple-
CH 15
ted, the lowest memorized
channel is displayed.
3 Use the Number buttons or
[CH. K / L] to select your
desired channel number.
(You can also use [K / L] to
enter it.)
<EXAMPLE>
08
If "NO TV SIGNALS" appears
on the TV screen, check the
antenna connection and try
again.
ADD / DELETE
NO TV SIGNALS
• Refer to page 9 on how to use
the Number buttons.
(Example: CH8)
NOTES:
• The unit may recognize CATV channels to be TV
channels if reception condition is poor. In this case,
check the antenna connection and try "AUTO CH
PROGRAMMING" again.
4 Press [ENTER] repeatedly. The channel number
changes to red (deleted) or blue (added) every
time you press the button.
• To delete another channel, repeat steps 3 to 4.
• Auto channel programming is NOT necessary
when connected to a cable box or satellite box.
Just select the channel for cable box or satellite
input (ex. CH3 or CH4) on the unit, then select
your desired channel on the cable box or satellite
box.
5 Press [SET-UP] to exit the menu.
NOTE:
• To confirm that channel(s) has (have) been deleted
or added, select it (them) using [CH. K / L].
13
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
TV/VCR SECTION
N-SCREEN DISPLAY
O
STATUS DISPLAY
CHECKING THE STATUS
On screen display examples are shown
below.
While receiving a broadcast or playing a
VHS tape, you can check the status dis-
TV/VCR
played on the screen by pressing [DISPLAY]. You
can also check the status of the preset MTS (Multi-
Channel Television sound). The display will change
as shown below each time you press [DISPLAY].
4
5
6
PLAY
HIFI
B
12:00AM
CH 123
STEREO/SAP
1
2
WHEN THE CLOSED CAPTION IS OFF
7
SP
COUNT 0:00:00
3
The display switches among VCR counter and clock.
1. VCR status
Display OFF
COUNTER display
CLOCK display
Displays the current VCR motion:
PLAY / STOP / REC / OTR / PAUSE / FF / REW
STOP
5:40PM
CH2
STOP
2. VCR sound mode status (during playback)
Displays "HIFI" when the tape is recorded in
Hi-Fi stereo mode.
SP
SP
COUNT 0:12:34
After 5 seconds
After 5 seconds
3. Tape speed (during recording)
5:40PM
CH2
Displays the tape speed: SP / SLP
4. Clock
COUNT 0:12:34
5. Channel number (in TV mode)
Displays the current channel number.
"AUX" is displayed in external input mode.
WHEN THE CLOSED CAPTION IS ON
6. MTS status (in TV mode)
Displays the current sound status of the broad-
cast: STEREO / SAP
The display switches among VCR counter and clock.
Display OFF
CLOCK/COUNTER
display
7. Tape counter (during playback or recording)
Shows the elapsed recording or playback time.
(Not available for a blank tape or blank portions
on the tape.) You can reset the counter by press-
ing [CLEAR].
STOP
5:40PM
CH2
*The display will disappear
after 5 seconds
SP
COUNT 0:12:34
MTS (Multi-channel Television Sound) SYSTEM
MTS allows for reception of sound other than the main audio program. You can listen or record
monaural audio sound, stereo sound or Secondary Audio Program (SAP).
TV/VCR
WHEN RECEIVING AN MTS BROADCAST
WHEN PLAYING CASSETTES
Press [TV/VCR Audio] repeatedly to select a sound
Press [TV/VCR Audio] repeatedly to select "HIFI"
mode when you watch or record a TV program.
or "MONO".
• The mode changes according to
the broadcast among "STEREO",
"SAP" and "MONO" every time
• This setting is saved until the cassette is ejected.
NOTE:
STEREO
• The initial setting is "HIFI". When you play non-HIFI tapes,
the unit will play only in the monaural mode even if the
setting is "HIFI".
you press the button.
NOTES:
• The initial setting is "STEREO". The unit records auto-
matically MTS broadcasts in Hi-Fi stereo sound unless
you select "SAP" beforehand.
(
)
WHEN IN THE EXTERNAL INPUT "AUX" MODE
Any output mode setting does not affect the audio
output and the current audio output mode does not
appear on the TV screen.
• If you select "SAP" when second audio is not available,
the unit will record in normal audio.
• This setting returns to the initial value when you turn off
the unit or unplug the power cord.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
IDEO CASSETTE
V
This unit will operate with any cassette that has the
mark. For best results, we recommend the
use of high-quality tapes. Do not use poor quality or
damaged tapes.
ERASE PREVENTION
Break off the tab on the
back edge of the cassette
to prevent accidental eras-
ing of recording.
SELECTING TAPE SPEEDS
Tab
Before recording, select the tape speed from : SP
mode (Standard Play) or SLP mode (Super Long
Play).You can also play a tape recorded in LP mode
(Long Play).
Cover the hole with plastic
tape to record on the tape
again.
Tape Speed
Type of tape
SP mode
Recording/Playback time
T60
T120
T160
1 hour
2 hours 2-2/3 hours
Plastic Tape
SLP mode
3 hours 6 hours 8 hours
NOTES:
• In the TV/VCR mode, if the cassette without tab is insert-
ed, playback will start automatically.
• If you press [REC/OTR] or [REC] when a cassette with-
out tab is inserted, the unit will eject it automatically.
LAYBACK
P
TRACKING ADJUSTMENT
BASIC PLAYBACK
• Tracking adjustment will be set automatically when
you start playback (Digital tracking function).
1 Insert a pre-recorded tape so that the
unit turns on automatically (Auto
Power On).
• If noise lines (black and white streaks) appear on
the playback picture, use [CH. K / L] until the
streaks disappear (Manual tracking adjustment).
This is available in Pause/Still/Slow mode, too.
2 Select TV/VCR mode by pressing [SELECT].
• To release manual tracking mode, stop the tape
once and start playback again.
NOTE:
• If the erase-prevention tab has been removed, the
unit will change the VCR mode and starts playback
automatically.
STILL PICTURE
• During playback, press [PAUSE F] to freeze the
picture.
You can advance the picture frame by frame by
pressing [PAUSE F] repeatedly.
3 To start playback,
B
PLAY
press [PLAY B].
NOTE:
• Even in the DVD mode, you can start the VCR play-
back if you press [PLAY B] on the front panel (of
the TV/VCR side).
• To release the Still mode, press [PLAY B].
SLOW MOTION
STOP
4 To stop the playback,
• During playback, press [PAUSE F] then press
[FWDD].
press [STOP C].
E
REW
• To release the Slow mode, press [PLAY B].
5 To rewind the tape,
press [REVE].
NOTE:
To forward the tape,
press [FWDD].
D
FF
• If the unit keeps the slow mode or still mode for more
than 5 minutes, it will automatically enter the stop mode.
To stop winding, press [STOP C].
A
EJECT
6 To eject the tape from the unit,
press [STOP/EJECT C A]
on the front panel.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
TV/VCR SECTION
PECIAL PLAYBACK
S
RENTAL PLAYBACK
AUTO REPEAT PLAYBACK
This function enables you to improve the
picture quality when playing back worn
cassettes such as rented tapes.
This function allows you to repeat a tape
indefinitely.
- TV/VCR SETUP -
TIMER PROGRAMMING
1 Press [SET-UP].
Use [K / L] to point to
"USER’S SET UP", then press
[ENTER].
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
1 Press [SET-UP].
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B
Use [K / L] to point to
"USER’S SET UP", then press
[ENTER].
B
2 Use [K / L] to point to "REPEAT PLAY".
USER’S SET UP
–
–
K
L
] to point to
Press [ENTER] repeatedly
2 Use [
/
USER’S SET UP
–
–
"RENTAL".
Press [ENTER] to select "ON".
until your desired selection
"ALL" or "BLANK" appears.
B
RENTAL
REPEAT PLAY
AUTO RETURN
[ON]
[OFF]
[OFF]
RENTAL
REPEAT PLAY
AUTO RETURN
[OFF]
[ALL]
[OFF]
B
• ALL:
Repeat playback from the
beginning to the end of the tape.
NOTE:
• To cancel the setting, select "OFF" at this step.
• BLANK: Repeat playback from the beginning to a part,
which is blank for more than 10 seconds.
Cancel repeat playback.
3 Press [SET-UP] to exit the menu.
• OFF:
4 Press [PLAY B] to start
RENTAL PLAY
B
3 Press [SET-UP] to exit the menu.
playback.
NOTE:
REPEAT PLAY
B
4 Press [PLAY B] to start the
• This setting will not change even if you turn off the
unit.
Repeat Play.
NOTES:
• If the rental mode is set to "ON", “RENTAL PLAY B”
display has priority.
• This setting will not change even if you turn off the
unit.
EARCH FUNCTION
S
ZERO RETURN
- TV/VCR SETUP -
4 Press [SET-UP].
TIMER PROGRAMMING
This function allows you to search easily
a beginning point that you want to review
by rewinding or fast forwarding.
SETTING CLOCK
CHANNEL SET UP
Use [K / L] to point to "ZERO
USER’S SET UP
V-CHIP SET UP
RETURN", then press
[ENTER].
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
B
NOTE:
The unit will begin rewinding
and the counter will appear on the TV screen.
• Zero Return WILL NOT work on a blank tape or a blank
portion of a tape.
The tape will automatically stop when the
counter returns to 0:00:00 (approx.).
1 Rewind or forward the tape to the beginning
point at which you want to review.
2 Press [CLEAR] repeatedly to
COUNT
0:00:00
set the counter to "0:00:00".
3 Press [PLAY B] for playback or [REC] for
recording.
Press [STOP C] when playback or recording is
completed.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
PICTURE SEARCH
INDEX SEARCH
This function is useful in finding or
skipping over a particular scene on a
tape. In this mode, the sound will be muted.
This function allows you to index the
starting point to make it easy to reach
the point in either fast forward or rewind mode.
1 During playback, press [REV E] or [FWD D]
• Every time you start recording, an index is marked
automatically. The index mark also works as the
starting point of Timer recording and OTR.
to view at a high speed (in forward/reverse).
2 Press [REV E] or [FWD D] again to view at
• The index mark will not be recorded if [PAUSE F]
is used during recording.
super high speed (in LP/SLP modes only).
NOTE:
• The time gap between making the index marks on
the tape should be greater than 1 minute for SP
recording, 2 minutes for LP recording and 3 min-
utes for SLP recording.
• Tapes recorded in the SP or LP mode will normally
display a noise bar on the TV screen and the picture
may revert to black and white.
3 Press [PLAY B] to return to normal playback.
• In some cases, the index mark at the beginning of
video tape cannot be detected.
Example: You are watching program number 4 and
want to fast forward to program number 7. Skip
three programs.
TIME SEARCH
This function allows you to quickly
advance the tape to your desired posi-
tion simply by entering the exact amount of playback
time you want to skip.
CURRENT PLAYBACK PROGRAM
Beginning of
the tape
End of
the tape
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7
In the example below: To watch a program before/
after 2 hour 50 minutes from the present position,
in either direction.
4
3
2
1
1
2
3
INDEX MARK
- TV/VCR SETUP -
1 Press [SET-UP].
TIMER PROGRAMMING
SETTING CLOCK
1 Press [SET-UP].
Use [K / L] to point to
- TV/VCR SETUP -
Use [K / L] to point to "TIME
CHANNEL SET UP
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
USER’S SET UP
V-CHIP SET UP
SEARCH", then press
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
"INDEX SEARCH", then press
[ENTER].
[ENTER].
B
TIME SEARCH
INDEX SEARCH
B
2 Use [K / L] until your desired
time appears.
TIME SEARCH
2 : 50
2 Use [K / L] until the number
of programs that you want to
skip appears.
INDEX SEARCH
0 3
To cancel the Time Search at
this point, press [SET-UP].
NOTE:
3 Use [s / B]. The unit begins rewinding or fast
• Time Search can be set up to a maximum of 9 hours
50 minutes (9:50) by 10 minutes at a time.
forwarding to the beginning of desired program.
4 When the search is completed, the unit will start
3 Use [s / B] to rewind or fast forward to the
playback automatically.
specified point.
• The numbers of Index Search can be set up to
20.
• This function is not available during recording.
The time counts down during the search. When
the counter reaches "0:00:00", the tape will start
playback automatically.
TO CANCEL DURING INDEX SEARCH
TO CANCEL DURING TIME SEARCH
Press [STOP/EJECT C A] on the unit or [STOP C].
Press [STOP/EJECT C A] on the unit or [STOP C].
17
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
TV/VCR SECTION
ECORDING
R
NOTES:
OTR (One Touch Recording)
• Insert a cassette tape with its erase-prevention tab in place.
• This unit cannot record the contents from the built-in DVD.
• You can ONLY watch the same TV program that is being
recorded.
This function enables you to start record-
ing for specified length simply by press-
ing [REC/OTR] on the unit.
K
L
] or the Number buttons to
1 Use [CH.
/
NORMAL RECORDING
select the channel to be recorded.
K
L
1 Use [CH.
/
] or the Number
CH 10
NOTE:
buttons to select the channel to
• If the unit is connected to a cable box or satellite
box, the unit must be on CH3 or CH4. Select the
channel to be recorded on the cable box or satellite
box.
be recorded.
NOTE:
• If the unit is connected to a cable box or satellite
box, the unit must be on CH3 or CH4. Select the
channel to be recorded on the cable box or satellite
box.
2 Press [SPEED] to select the desired tape speed
(SP/SLP).
(Refer to "SELECTING TAPE SPEEDS" on page 15.)
2 Press [SPEED] to select the
OTR (2 : 30)
desired tape speed (SP/ SLP).
3 Press [REC/OTR] on the unit
SP
(Refer to "SELECTING TAPE
SPEEDS" on page 15.)
repeatedly until your desired
length appears on the screen.
The recording time will increase
REC
3 Press [REC] to start recording.
by 30 minutes up to 8 hours.
SP
Recording starts immediately when you press
[REC/OTR].
SP
NOTE:
• If you press [REC/OTR] when "8:00" is displayed,
the unit returns to the normal recording mode.
4 Press [PAUSE F] to tempo-
PAUSE
rarily stop recording unwanted
scenes.
Time(s)
1 time
2 times
3 times
↓
Display
Recording length
(normal recording)
Press [PAUSE F] again or
[REC] to resume recording.
0:30
1:00
↓
30 minutes
60 minutes
↓
SP
NOTE:
• If the recording is paused for more than 5 minutes,
the unit will automatically switch to the recording
mode to prevent tape damage.
17 times
8:00
480 minutes
NOTES:
• Even if you press [POWER] during OTR, the unit
5 Press [STOP C] to stop recording.
continues recording.
• You cannot start OTR with the remote control.
• In the SLP mode, maximum recording time, assum-
ing the tape starts at the beginning, is 8 hours using
T-160 (or 6 hours using T-120).
• If the tape runs out before the end time, the unit will
switch to the stop mode immediately, eject the tape
and turn itself off.
• To show the remaining time of OTR, press [DISPLAY]
on the remote control to display "OTR" on the TV
screen. (It will show up momentarily then disappear.)
TO CANCEL OTR IN PROGRESS
Press [STOP/EJECT C A] on the unit or [STOP C].
18
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
AUTOMATIC TIMER RECORDING
– TIMER PROGRAMMING –
CH DATE BEGIN END
61 7/03 MON 7:30P
- - -/- - - - - -:- -
- - -/- - - - - -:- -
5 Use [K / L] to set the desired
begin/end hour and minute.
You can set 8 programs to record on
M
8:50PM- -
-:- - - -
-:- - - -
B
specific days, daily or weekly within
1 year period.
Press [B] to move to next item.
– TIMER PROGRAMMING –
CH DATE BEGIN END
61 7/03 MON 7:30P
- - -/- - - - - -:- -
- - -/- - - - - -:- -
6 Use [K / L] until the desired
tape speed appears.
In the example below, the timer is being set to record:
M
8:50PMSP
-:- - - -
-:- - - -
B
DATE:
July 3rd, 2006
(Refer to "SELECTING TAPE
SPEEDS" on page 15.)
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL:
CH61
SP
7 Press [ENTER] to complete setting.
TAPE SPEED:
• To set another program, repeat steps 2 to 7.
• To correct the program while setting, press [s]
- TV/VCR SETUP -
1 Press [SET-UP].
K
L
] to enter
to go back one step and use [
/
B
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
Use [K / L] to select
"TIMER PROGRAMMING",
then press [ENTER].
the correct numbers.
• Press [SET-UP] to exit the menu.
8 Press [POWER] to set automatic timer recording.
NOTE:
The recording indicator lights up.
• If you have not yet set the clock, "MANUAL CLOCK
SET" menu appears. Set to the present time and
date (refer to "MANUAL CLOCK SETTING" on page
10) then start setting the timer recording.
NOTES:
• You MUST turn off the unit to activate automatic
timer recording.
• If power is not turned off and
you continue watching TV,
– TIMER PROGRAMMING –
2 Use [K / L] to select the
CH DATE
BEGIN END
"TIMER REC STANDBY" starts
desired program position, then
TIMER REC STANDBY
- - -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
-:- -
-:- -
-:- -
-:- -
- -
- -
- -
- -
B
flashing on the TV screen 2 min-
utes before the programmed
start time.
• Make sure a cassette with erase-prevention tab is
inserted before turning off the unit. If the cassette does
not have the tab, it will be ejected when you press
[POWER] to turn off.
press [B].
– TIMER PROGRAMMING –
3 Use [K / L] until the desired
channel number appears, then
press [B].
CH DATE
BEGIN END
61 -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
-:- -
-:- -
-:- -
-:- -
- -
- -
- -
- -
B
NOTE:
9 At the programmed start time, the unit begins
• If the unit is connected to a cable box or satellite box,
the unit must be on CH3 or CH4. Select the channel
to be recorded on the cable box or satellite box.
recording.
NOTES:
• The recording starts without turning on the TV screen.
4 Set the starting date.
• During recording, you can watch only currently
being recorded TV program or DVD playback.
Press [POWER] and [SELECT] to select the desired
mode.
• If the tape runs out before the end time, the recording
stops immediately and the cassette will be ejected.
– TIMER PROGRAMMING –
CH DATE BEGIN END
For once recording :
K
Press [ ] until the desired
61 7/03 MON -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
-:- -
-:- -
-:- -
-:- - - -
- -
- -
- -
B
date appears. Then press [B].
For every day recording :
To record the same channel
at the same time every day.
–TIMER PROGRAMMING–
CH DATE
BEGIN END
61 EVRY DAY -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
-:- - - -
-:- - - -
-:- - - -
B
TO CONFIRM THE PROGRAM
Press [L] until "EVRY DAY"
appears, then press [B].
1 Press [POWER] to turn on the unit.
(The Recording indicator turns off.)
For weekly recording :
To record the same channel
at the same time every week.
– TIMER PROGRAMMING –
CH DATE BEGIN END
2 Press [SET-UP].
Use [K / L] to select "TIMER PROGRAMMING",
then press [ENTER].
61 EVRY MON -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
-:- -
-:- -
-:- -
- -
- -
- -
B
L
Press [ ] until "EVRY" and
your desired day of the week
(Ex. Every Monday) appear,
then press [B].
3 Confirm the details of programs that appear on
the TV screen.
4 Press [SET-UP] to exit the menu.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
TV/VCR SECTION
RECORDING
ABOUT OVERLAP OF PROGRAMS
TO CORRECT A PROGRAM AFTERWARD
When programs overlap, a program may not be
recorded.
1 Press [POWER] to turn on the unit.
2 Repeat steps 1 to 2 of "AUTOMATIC TIMER
• The program with an earlier start has priority.
• Once the earliest program finishes, the overlapping pro-
grams will begin recording in sequence.
• When the starting time is the same, the program set on
the highest position in the program list has priority.
• The illustration below demonstrates the sequence of
recordings.
RECORDING" on page 19.
3 Press [B] (or press [s] to go back one step)
until the part you want to correct begins flashing,
then use [K / L] to make the changes.
Press [ENTER] to confirm.
4 Press [POWER] to set automatic timer recording.
Recording Sequence
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
TO CANCEL A PROGRAM
1 Press [POWER] to turn on the unit.
9:00AM
10:00AM
11:00AM
12:00PM
2 If recording is in progress, press
*Recording period is SHADED
[STOP/EJECT C A] on the unit.
TIMER PROGRAM EXTENSION
3 Press [SET-UP].
Use [K / L] to select "TIMER PROGRAMMING",
then press [ENTER].
You can shift the time schedule of an automatic timer
recording after programming or during recording.
4 Use [K / L] to select a program you want to
1 Press [POWER] to turn on the unit.
cancel and press [CLEAR].
2 Press [SET-UP].
5 Press [SET-UP] to exit the menu.
Use [K / L] to select "TIMER PROGRAMMING",
then press [ENTER].
– TIMER PROGRAMMING –
3 Press [REC] and use
CH DATE
BEGIN END
[K / L] to select the desired
61 7/03 MON 7:30P
M
8:50PMSP
-:- - - -
-:- - - -
-:- - - -
B
- - -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
program.
4 Press [REC] repeatedly until your desired
begin/end time appears.
Each press will shift forward the begin/end time
for recording by 10 minutes.
NOTES:
• When the recording is already in progress, each press
will shift forward the end time only.
• If you want to cancel while setting, press [PAUSE F]
on the remote control. The recording time returns to
the original time.
• When you shift forward the time schedule during
recording, the recording speed will be automatically
set to the SLP mode.
5 Press [ENTER] to complete the setting. Then
press [SET-UP] to exit the menu.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
AUTO RETURN
This function allows you to automatically
search the beginning of the recorded
program(s) after timer recording finishes.
COPYING A VIDEO CASSETTE
(from another source)
You can make copies of video tapes for
your enjoyment.
You CANNOT copy a DVD to a videotape.
- TV/VCR SETUP -
TIMER PROGRAMMING
1 Press [SET-UP].
Use [K / L] to point to
"USER’S SET UP",
then press [ENTER].
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
WARNING: Unauthorized recordings of copyrighted
video tapes may be an infringement of copyright
laws.
B
USER’S SET UP
–
–
2 Use [K / L] to point to
"AUTO RETURN", then press
[ENTER] to select "ON".
Connect the unit and a source (for playing) device
as shown the following diagram.
RENTAL
REPEAT PLAY
AUTO RETURN
[OFF]
[OFF]
[ON]
B
HEADPHONE
VIDEO
L
AUDIO
R
[This unit]
3 When all the timer recordings are completed, the
unit will rewind to the beginning of the recorded
program(s) and then turn itself off.
NOTE:
[Ex: Jacks of
source device]
• If you turn off the unit while rewinding the tape, the
AUTO RETURN will stop.
Audio/Video
cables
(not supplied)
AUDIO
L
OUT
IN
TO CANCEL THE AUTO RETURN MODE
R
VIDEO
Repeat steps 1 to 2 and press [ENTER] to select
"OFF".
OUT
IN
• Even if any power failure occurs, the unit will
retain its memory for this feature.
1 Insert a pre-recorded video cassette into the
source device (VCR, camcorder, etc.).
2 Insert a video cassette to record into this unit’s
cassette compartment.
3 Press [SPEED] to select the
desired recording speed
(SP/SLP).
SP
AUTO REWIND-EJECT
• When the end of a tape is reached
during recording, playback, or fast-
forward, the tape will automatically rewind to the
beginning. After rewinding finishes, the unit will
eject the tape and turn itself off.
4 Press [SELECT] until "AUX"
AUX
appears on the screen.
5 Press [REC/OTR] on the unit.
• This function is operative when REPEAT PLAY is
set to "OFF".
6 Begin playback of the tape
in the source device.
• The tape will not auto-rewind during timer record-
ing or One Touch Recording (OTR).
NOTE:
• For best results during copying, use the front panel con-
trols whenever possible. The remote control might affect
the operation of the source device.
7 To stop copying, press [STOP/EJECT C A] on
the unit, then stop the playback on the source
device.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
DVD SECTION
BOUT THE DISCS
A
PLAYABLE DISCS
Playable
discs
Region Recorded Disc
Mark (logo)
Disc types
code
signals size
DVD-Video
* 1,2,4,6,
or
10,11
Digital
12 cm
Example
DVD-RW
DVD-R
Title 1
Title 2
video
or
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1
Chapter 2
-
-
(MPEG2)
8 cm
* 1,3,4,5,
6,7,9,10
DVD+RW
DVD+R
* 1,3,4,5,6,8,9,10
Audio CD
* 4,6,10
Example
12 cm
or
8 cm
Digital
audio
-
CD-RW
CD-R
Track 1
Track 2
Track 5
Track 6
Track 3
Track 4
* 4,5,6,9,10
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot
be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc's producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*6:You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may
not play them back. Even if they are played back, the sound or video quality will be compromised.
*7:You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand's DVD
recorder. However, depending on the recording status of a disc, the disc may not be played back at all
or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc
with the DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not
be played back at all or normally (the picture or sound may not be smooth, etc.).
*9: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may
not play back properly.
*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read
it correctly.
*11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region
format can only be played back on unit with the same region code.
UNPLAYABLE DISCS
• NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-i / Photo CD / Video CD / DVD-Audio / DVD with region codes other than 1 or ALL /
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3
• The sound MAY NOT be heard: Super Audio CD
NOTE:
Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio
CD layer cannot be delivered.
• Any other discs without compatibility indications
22
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
LAYING A DISC
P
FAST FORWARD / FAST REVERSE
BASIC PLAYBACK
• During playback, press and hold
[FWD D] for fast forward or
[REV E] for fast reverse.
1 Press [POWER] to turn on the
unit.
• Every time you press and hold
the button, playback speeds up
and the level of the speed
appears on the screen.
D1
2 Press [OPEN/CLOSE A] on the unit.
3 Place the disc in the tray, with
the label facing up.
NOTES:
• For DVDs, fast forward/reverse speed is different
depending on the disc. Approximate speed is 1 (×2),
2 (×8), 3 (×20), 4 (×50) and 5 (×100).
4 Press [PLAY B].
• The tray will close automatically and playback will
start. When you play back a DVD which features a
title menu, it may appear on the screen.
• For Audio CDs approximate speed is 1 (×2), 2 (×8)
and 3 (×30).
• When you use buttons on the front panel, use
[SEARCH E / D].
NOTES:
• Closing the disc tray manually or by pressing
[OPEN/CLOSE A] also starts playback.
• To return to normal playback, press [PLAY B].
• With DVDs that use titles for playback program signals,
playback may start from the second title or it may skip
these titles.
SLOW FORWARD / SLOW REVERSE
• During playback, press [PAUSE F].
• Press and hold [FWD D] for slow for-
ward or [REV E] for slow reverse.
5 To freeze the picture, press [PAUSE F] during
playback.
1
• Every time you press and hold
the button, playback is slowed
down and the level of the speed
appears on the screen.
NOTE:
• The sound will be muted in pause mode.
6 Press [STOP C] to stop
NOTES:
playback temporarily.
Resume ON
• Slow forward / reverse speed varies with the disc.
Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
• Press [PLAY B] to resume
the playback.
• To cancel resume and stop the
disc, [STOP C] again.
• When you use buttons on the main unit, use
[SEARCH E / D].
• To return to normal playback, press [PLAY B].
NOTES:
• The resume information stays on even if the unit is
turned off.
• A "prohibited icon" may appear
at the top-right on the TV screen
during operation. This means
DISC MENU / TITLE MENU
DVD may contain menus to navigate the
disc and access special features.
that the operation is not available on the disc.
1 Press [DISC MENU] or [TITLE].
• The DVD main menu / the title menu will appear.
• You can call up the menu even during playback.
STEP BY STEP PLAYBACK
• During playback, press [PAUSE F].
You can advance the picture frame by
frame by pressing [PAUSE F] repeatedly.
K
L
2 Use [
/
/
s / B] to select an item, and press
[ENTER].
• To return to normal playback, press [PLAY B].
NOTES:
• If disc menu is available on the disc, audio language,
subtitle options, chapters for the title and other
options will appear for selection.
• Contents of menu and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
DVD SECTION
PECIAL PLAYBACK FUNCTIONS & SETTINGS
S
FUNCTION TABLE
Setting menu switches as below every time you press [MODE] during playback.
See the reference page for how to set each menu. Some functions are not available in specific
modes, but this is not a malfunction.
DVD-V
CD
Press [MODE]
Press [MODE]
AUDIO STREAM 1
...
AUDIO STREAM 8
STEREO
L-ch
R-ch
AUDIO MENU (p25)
AUDIO MENU (p25)
V.S.S. MENU (p26)
SEARCH MENU (p26)
REPEAT MENU (p27)
A-B REPEAT MENU (p27)
MENU OFF
OFF
OFF
1
2
SUBTITLE MENU (p25)
SUBTITLE STREAM 1
....
SUBTITLE STREAM 32
TRACK SEARCH
TIME SEARCH
MARKER SEARCH
ANGLE 1
....
ANGLE 8
ANGLE MENU (p25)
(If available)
OFF
TRACK
ALL
OFF
ZOOM MENU (p25)
ZOOM 1 (×1.3)
ZOOM 2 (×2.0)
ZOOM 3 (×4.0)
OFF
A-
A-B
OFF
ON
BLACK LEVEL MENU (p26)
V.S.S. MENU (p26)
OFF
1
2
SEARCH MENU (p26)
CHAPTER SEARCH
TITLE SEARCH
TIME SEARCH
MARKER SEARCH
OFF
CHAPTER
TITLE
REPEAT MENU (p27)
A-B REPEAT MENU (p27)
MENU OFF
OFF
A-
A-B
24
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
ANGLE MENU
AUDIO MENU
Some DVD discs contain scenes which
have been shot from various angles and
you can change them as you like.
AUDIO LANGUAGE
You can select audio language during DVD playback
(if multi languages are available).
1 During playback, press
1 / 8 (ANGLE)
[MODE] repeatedly until
1.ENG Dolby D 3/2.1ch 48k/3
1 Press [MODE] during playback.
ANGLE menu appears.
2 Use [K / L] to select your desired angle.
K
L
] to select your desired language.
2 Use [
/
3 Press [RETURN] to exit the menu.
NOTES:
• This function may not work on some DVDs with mul-
tiple audio languages. In this case, set it on the disc
menu. (Operation varies depending on discs. Refer to
the manual of the disc.)
NOTE:
• If multiple angle function is not available, this menu
does not appear on the screen.
• When "NOT AVAILABLE" appears
(
)
NOT AVAILABLE AUDIO
on the TV screen, it means this
function is not available on the
disc.
ZOOM
The Zoom function allows you to enlarge
the video image and to pan through the
enlarged image.
3 Press [RETURN] to exit the menu.
STEREO SOUND MODE
1 During playback, press
OFF (ZOOM)
You can select sound output mode.
[MODE] repeatedly until
ZOOM menu appears.
STEREO (AUDIO)
1 Press [MODE] during
playback.
2 Press [ENTER] repeatedly to select the required
zoom factor.
K
L
] to select the sound mode.
2 Use [
/
OFF
ZOOM1(×1.3) ZOOM2(×2.0) ZOOM3(×4.0)
ZOOM1 ZOOM2 ZOOM3
• STEREO: stereo sound with left and right channels
OFF (ZOOM)
L-ch:
R-ch:
left channel sound only
right channel sound only
3 Press [RETURN] to exit the menu.
K
L
s
B
] to move the zoomed picture
3 Use [
/
/
/
across the screen.
SUBTITLE LANGUAGE
You can select a language for subtitles
during DVD playback (if available).
4 Press [RETURN] to exit.
• The zoomed position guide
appears on the right corner
of the TV screen in the zoom mode.
1 During playback, press
[MODE] repeatedly until
SUBTITLE menu appears.
1.ENG/6 (SUBTITLE)
NOTES:
• Zooming function does not work while disc menu is shown.
• Zooming function is not available on some discs.
• It may take several seconds to slide the zoomed picture.
• The picture may be distorted if you operate other
functions (ex. pause, fast forward etc.) repeatedly in
the zoom mode.
2 Use [K / L] to select your desired subtitle lan-
guage. To cancel subtitles, select "OFF".
3 Press [RETURN] to exit the menu.
• To cancel the zoom mode, repeat steps 1-2 and
press [ENTER] until "OFF" appears.
NOTES:
• This function may not work on some DVDs with mul-
tiple subtitle languages. In this case, set it on the disc
menu. (Operation varies depending on discs. Refer to
the manual of the disc.)
• If the selected language does not have 3-letter code,
"---" will be displayed on the screen. (Refer to
"LANGUAGE CODE LIST" on page 35.)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
DVD SECTION
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
BLACK LEVEL MENU
SEARCH MENU
You can adjust the Black Level to make the
black parts of the picture brighter.
You can begin playback at a specific track, title,
chapter or from a specific point on a disc.
1 During playback, press
TRACK SEARCH
OFF (BLACK LEVEL)
[MODE] repeatedly until
BLACK LEVEL menu
appears.
1 During playback, press [MODE]
__/12 (SEARCH)
repeatedly until SEARCH
menu appears.
K
L
] to select "ON" or "OFF".
2 Use [
/
2 Within 60 seconds, use the Number buttons to
select the desired track number. Playback will
start from the selected track.
• ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
(Initial setting)
NOTES:
3 Press [RETURN] to exit the menu.
• For single digit press [0] first, if the total track of the
disc is 10 tracks or more.
NOTE:
• During playback or pause, you can also select tracks
by skipping with [H / G] (or [SKIP H / G] on
the front panel), or entering the desired track number
with the Number buttons.
• The setting will be saved even if the unit is turned off.
V.S.S. (Virtual Surround System)
You can enjoy surround-sound effect
over two speakers on this unit.
3 Press [RETURN] to exit the menu.
CHAPTER SEARCH
1 During playback, press
OFF (V.S.S.)
1 During playback, press
__/21 (SEARCH)
[MODE] repeatedly until
[MODE] repeatedly until
V.S.S. menu appears.
SEARCH menu appears.
2 Use [K / L] to select the desired sound effect.
2 Use the Number buttons to enter the desired
chapter number. Playback will start at the selected
chapter.
• 1:
2:
Natural effect
Emphasized effect
OFF: No effect (Initial setting)
• Press [CLEAR] to erase the incorrect input.
• For single digit press [0] first, if the total number of
chapters of the disc is 10 or more.
3 Press [RETURN] to exit the menu.
NOTES:
• When playing back 96kHz with Virtual Surround func-
tion, the sound will be down sampled at 48kHz and
output as digital audio.
3 Press [RETURN] to exit the menu.
TITLE SEARCH
(for CD play only)
1 During playback, press [MODE] repeatedly until
• Virtual Surround System will be effective only when
you set the sound mode to "STEREO". (Refer to
"STEREO SOUND MODE" on page 25.)
SEARCH menu appears.
_/2 (SEARCH)
K
L
] to display
2 Use [
/
TITLE SEARCH menu.
3 Use the Number buttons to enter the desired title
number. Playback will start at the selected title.
• Press [CLEAR] to erase the incorrect input.
• For single digit press [0] first, if the total number of
titles of the disc is 10 or more.
4 Press [RETURN] to exit the menu.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
REPEAT PLAYBACK
TIME SEARCH
1 During playback, press [MODE] repeatedly until
REPEAT TRACK
SEARCH menu appears.
1 During playback, press
[MODE] repeatedly until
REPEAT menu appears.
OFF (REPEAT)
TOTAL
0:0 _:_ _
0:04:23
K
L
] repeatedly to
2 Use [
/
display TIME SEARCH menu.
2 Use [K / L] to select your desired repeat mode.
• OFF: Repeat function off
TRACK: Current track repeat
ALL: All track repeat
NOTE:
3 Within 60 seconds, use the Number buttons to
enter a desired disc time. Playback will start at
the specified time.
• Press [CLEAR] to erase the incorrect input.
• When there is no need to enter a number, "0"
appears automatically.
• Repeat Track setting will be cleared when moving to
other track.
4 Press [RETURN] to exit.
3 Press [RETURN] to exit the menu.
MARKER SEARCH
REPEAT TITLE / CHAPTER
You can set markers to memorize your favorite
places on a disc.
1 During playback, press
OFF (REPEAT)
[MODE] repeatedly until
1 During playback, press [MODE] repeatedly until
REPEAT menu appears.
SEARCH menu appears.
2 Use [K / L] to select your desired repeat mode.
2 Use [K / L] repeatedly to
1
2
3
4
5
6
7
8
9
10 AC
• OFF:
Repeat function off
__ __:__:__
display MARKER SEARCH
menu.
CHAPTER: Current chapter repeat
<Example: CD>
TITLE:
Current title repeat
3 Use [s / B] to select a marker number among
NOTES:
1 to 10.
• Repeat Title/Chapter is not available in some scenes.
• The REPEAT setting will be cleared when moving to
other title or chapter.
4 When the track (or title) reaches your desired
point, press [ENTER] to set a marker.
3 Press [RETURN] to exit the menu.
• The track (or title) number and
elapsed playing time will appear
on the TV screen.
2
3
4
5
6
7
8
9
10
AC
1
00:15:30
REPEAT A-B
OFF (A-B REPEAT)
A- (A-B REPEAT)
A-B (A-B REPEAT)
A
A
A
B
B
B
1 Press [MODE] repeatedly until
5 You can play from the desired point by selecting
the marker number by using [s / B] and then
pressing [ENTER].
A-B REPEAT menu appears.
2 Press [ENTER] at your desired
starting point (A).
6 To clear a marker, select the marker number and
press [CLEAR]. To clear all markers at once,
select "AC" with [s / B] and press [ENTER].
To cancel it, press [CLEAR].
3 Press [ENTER] again at your
desired ending point (B).
NOTE:
The repeat sequence begins.
• The following operation will also erase all markers:
– Opening the disc tray
– Turning off the power
– Pressing [SELECT]
4 To exit the sequence, follow step1 and press
[ENTER] repeatedly until "OFF" appears and
press [RETURN] to exit the menu.
7 Press [RETURN] to exit the menu.
NOTES:
• The A-B repeat section can be set only within the cur-
rent title (for DVDs) or current track (for Audio CDs).
• A-B repeat is not available with some scenes in DVD.
• A-B repeat playback is not available during other
repeat playback.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
DVD SECTION
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
PROGRAMMED PLAYBACK
You can determine the playing order of tracks.
5 Press [STOP C] to temporarily stop the playback.
You can resume the playback by pressing
[PLAY B].
1
In the stop mode, press [MODE].
Press [STOP C] twice to cancel the pro-
grammed playback.
PROGRAM
CD-DA
TOTAL 0:00:00
• The PROGRAM screen appears.
1
2
3
4
5
6
7
3:40
4:30
5:00
3:10
5:10
1:30
2:30
NOTE:
ENTER
1/4
1/1
PLAY
1
3:40
CLEAR
• REPEAT setting is available during programmed
playback. (Refer to "REPEAT TRACK" on page 27.)
K
L
] to select a track,
2 Use [
/
PROGRAM
CD-DA
TOTAL 0:14:25
then press [ENTER].
RANDOM PLAYBACK
1
2
3
4
5
6
7
3:40
1
3
3:40
5:00
4:30
5:00
3:10
5:10
1:30
2:30
10 1:30
12 2:45
6
1:30
NOTES:
• Up to 99 tracks can be entered.
This function shuffles the playing order of
tracks.
ENTER
1/4
1/1
PLAY
6
1:30
CLEAR
• Press [CLEAR] to erase the
most recently entered track.
1 In the stop mode, press
RANDOM
CD-DA
TOTAL 0:45:55
[MODE] twice.
• If you enter more than 8 tracks, you can change pages
of the program list with [H / G].
• To erase all tracks in the program at once, select "ALL
CLEAR" at the bottom of the track list.
RANDOM PROGRAM
no indication
-
-
-
-
• The RANDOM screen appears.
PLAY
3 Repeat step 2 until you select all the tracks you
2 Press [PLAY B] to start random playback.
want to play in the program.
NOTE:
• REPEAT setting is available during random playback.
(Refer to "REPEAT TRACK" on page 27.)
4 Press [PLAY B] to play the programmed tracks.
3 Press [STOP C] to stop random playback.
N-SCREEN INFORMATION
You can check the information about the current disc by pressing [DISPLAY].
O
For DVD-Videos
For Audio CDs
1 Press [DISPLAY] during playback to show cur-
rent Chapter.
1 Press [DISPLAY] during playback to show the
current Track.
4/12 0:03:21 - 0:02:15
T
• The elapsed and remaining
• The elapsed and remaining
playing time of the current
track will be displayed.
9/49
0:00:00 -0:03:30
playing time of the current
chapter will be displayed.
2 Press [DISPLAY] again to show current Title.
2 Press [DISPLAY] again to show current Total
• The elapsed and remaining
Track.
4/12 0:13:45 - 0:45:40
T
1/3 0:00:00 - 1:23:45
playing time of the current title
will be displayed.
• The elapsed and remaining
playing time of the total track
will be displayed.
PROGRAM
B
T
L1
3 Press [DISPLAY] again.
• The bit rate and the current
repeat setting will be displayed.
When in the PROGRAM
mode or RANDOM
mode.
• If you are playing a dual layered disc, the layer
number will also be displayed
(L0: Layer 0 is playing. L1: Layer 1 is playing).
3 Press [DISPLAY] again to exit.
4 Press [DISPLAY] again to exit.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
HANGING THE DVD SET UP ITEMS
C
You can change the DVD player’s settings by pressing [SET-UP] in DVD mode.
The set up items are shown in the diagram below.
Press [SET-UP] twice
QUICK
CUSTOM
INITIALIZE
AUDIO
SUBTITLE
LANGUAGE (p29)
DISC MENU
TV MODE
STILL MODE
TV MODE
DISPLAY (p30)
AUDIO (p30)
DRC
DOWN SAMPLING
DOLBY DIGITAL
DOLBY DIGITAL
PARENTAL LEVEL
PASSWORD CHANGE
PARENTAL (p30)
OTHERS (p31)
ANGLE ICON
AUTO POWER OFF
CUSTOM MENU
1 In the stop mode, press
[SET-UP] twice to display the
DVD SETUP menu.
SETUP
A
LANGUAGE SETTING
QUICK
CUSTOM
INITIALIZE
SETUP
LANGUAGE
4 Use [K / L] to select the
desired item, then press
[ENTER].
AUDIO
SUBTITLE
DISC MENU
ORIGINAL
OFF
ENGLISH
NOTES:
• Pressing [SET-UP] once will
show TV/VCR SETUP menu partly.
K
L
SET:ENTER
SELECT:
/
EXIT:SETUP CANCEL:RETURN
• AUDIO:
Sets the audio language.
• If the menu does not appear, press [STOP C] first.
Make sure the unit is in DVD mode before setting.
• SUBTITLE: Sets the subtitle language.
• DISC MENU: Sets the language for DVD menu.
5 Use [K / L] to select your desired language
2 Use [K / L] to select "CUSTOM", then press
from the list, then press [ENTER].
[ENTER].
SETUP
CUSTOM
6 Press [SET-UP] to exit the menu.
3 Use [K / L] to select the
desired item, then press
[ENTER].
LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS
NOTES:
SETUP
LANGUAGE
• If your desired language is not
on the list, select "OTHER" and
enter the code of the language.
(Refer to "LANGUAGE CODE
LIST" on page 35.)
LANGUAGE CODE
Refer to the pages below for
continuation to set up each item.
Please enter a 4-digit language code.
• LANGUAGE setting: P29
• DISPLAY setting:
• AUDIO setting:
• PARENTAL setting: P30
• OTHERS setting: P31
A
B
C
D
E
P30
P30
• This feature may not be valid due to default setting
of the disc. In this case, press [MODE] to select the
language. (Refer to "AUDIO MENU" on page 25.)
• If you select a language that is not supported by the
disc, subtitle will be "OFF" automatically and the
default language of the disc will be selected.
• To change the language for the on-screen menus,
call up the TV/VCR SETUP menu by pressing
[SET-UP] once and set the language. (Refer to "ON-
SCREEN MENU LANGUAGE" on page 11.)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
DVD SECTION
CHANGING THE DVD SET UP ITEMS
B
C
DISPLAY SETTING
AUDIO SETTING
4 Use [K / L] to select an item,
SETUP
DISPLAY
Choose the appropriate Audio settings for your
equipment as it only affects during the playback of
DVD discs.
then press [ENTER].
TV MODE
STILL MODE
4:3 LETTER BOX
AUTO
QUICK
• TV MODE:
K
L
] to select an item,
4 Use [
/
SETUP
AUDIO
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
then press [ENTER] repeated-
ly until your desired setting
appears.
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
• 4:3 LETTER BOX (default):
To show black bars on top and
bottom of the screen.
• 4:3 PAN & SCAN:
To show a full height picture with both sides
trimmed.
SETUP
DISPLAY
TV MODE
4:3 LETTER BOX
4:3 PAN & SCAN
• DRC (Dynamic Range Control):
• ON : To compress the range of soft to loud sound.
(default)
• OFF : Output the original sound.
NOTE:
• DOWN SAMPLING:
• ON : Output in 48kHz. (default)
• OFF : Output the original sound.
• You can access this setting directly by selecting
"QUICK" at step 2 on page 29.
• STILL MODE:
This function allows you to adjust picture resolution
and quality in the still mode.
NOTE:
• When playing a disc with copyright protection, the
sound will be output at 48kHz even if the setting is
"OFF".
SETUP
DISPLAY
STILL MODE
AUTO
FIELD
FRAME
• AUTO (default):
Automatically select the best
QUICK
• DOLBY DIGITAL:
• BITSTREAM: Output a Dolby Digital signal.
(default)
resolution setting (FRAME or FIELD) based on
the data characteristics of the pictures.
• FIELD:
Select "FIELD" when the pictures are still unstable
even if "AUTO" is selected. FIELD stabilizes the
pictures, although the picture quality may become
coarse due to the limited amount of data.
• FRAME:
Select "FRAME" to display relatively motionless
pictures in higher resolution. FRAME improves
the picture quality, although it may unstabilize the
pictures due to simultaneous output of two field
data.
• PCM:
Convert the Dolby Digital to PCM.
(2 channel stereo)
NOTES:
• You can access this setting directly by selecting
"QUICK" at step 2 on page 29.
• Set to "BITSTREAM" when the unit is connected to
a Dolby Digital Decoder.
5 Press [SET-UP] to exit the menu.
5 Press [SET-UP] to exit the menu.
D
PARENTAL SETTING
This feature allows you to set the rating level of your
DVD discs. Playback will stop if the disc ratings
exceed the level you set.
PARENTAL LEVEL
4 Enter four-digit password with
SETUP
PARENTAL
PASSWORD
the Number buttons, then
Please enter a 4-digit password.
press [ENTER].
NOTE:
• Enter any 4 digits (except for 4737) to set the pass-
word for the first time, and record it for your memory.
5 Use [K / L] to select
SETUP
PARENTAL
"PARENTAL LEVEL", then
PARENTAL LEVEL
PASSWORD CHANGE
ALL
press [ENTER].
30
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
E
OTHERS SETTING
SETUP
PARENTAL
6 Use [K / L] to select the
desired level, then press
[ENTER].
PARENTAL LEVEL
K
L
] to select an item,
4 Use [
/
SETUP
OTHERS
ALL
8 [ADULT]
7 [NC-17]
6 [R]
ANGLE ICON
AUTO POWER OFF
ON
ON
then press [ENTER] repeated-
ly to set the feature "ON" or
"OFF".
7 Press [SET-UP] to exit the menu.
• ANGLE ICON:
CONTROL LEVELS
• ON: To show the angle icon when multiple
camera angles are available during DVD
playback. (default)
• ALL: All parental locks are canceled.
• 8 [ADULT]: DVD software of any grade
(adult/general/children) can be played back.
• OFF: To keep angle icon from the display.
• 7 to 2: Only DVD software intended for general
use and children can be played back.
• AUTO POWER OFF:
• ON: To activate screen saver program and turn
off the unit automatically. (default)
• 1 [KID SAFE]: Only DVD software intended for
children can be played back, with those intended
for adult and general use prohibited.
• OFF: To deactivate Auto Power Off function.
NOTE:
• The screen saver program starts when there is no
input from the unit for 5 minutes in the stop mode.
After the screen saver program is activated for 15
minutes, the power is automatically turned off.
NOTE:
• With some DVDs, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
5 Press [SET-UP] to exit the menu.
PASSWORD CHANGE
SETUP
PARENTAL
4 Enter current password with
the Number buttons, then
press [ENTER].
PASSWORD
Enter current password.
INITIALIZE
This allows you to return all items of
SETUP
PARENTAL
5 Use [K / L] to select
"PASSWORD CHANGE", then
press [ENTER].
PARENTAL LEVEL
PASSWORD CHANGE
ALL
SETUP menu (except for PARENTAL
setting and menu language) to their default settings.
SETUP
PASSWORD
Please enter a 4-digit password.
PARENTAL
6 Enter four-digit password with
the Number buttons, then
press [ENTER].
1 In the stop mode, press [SET-UP] twice to
display the DVD SETUP menu.
1
2
3
4
Don't forget the password.
Press 'ENTER' to activate password.
SETUP
2 Use [K / L] to select
QUICK
"INITIALIZE", then press
CUSTOM
7 Press [SET-UP] to exit the menu.
INITIALIZE
[ENTER].
NOTE:
• If you forget the current password, enter 4737 first,
then enter your new password.
The former password will be cleared and parental
level will be set to "ALL" (default).
3 Use [K / L] to select "YES",
SETUP
INITIALIZE
then press [ENTER] twice.
• To cancel the initialization,
select "NO".
Initialize?
NO
YES
4 Press [SET-UP] to exit the menu.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
ROUBLESHOOTING GUIDE
T
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following
guide for the possible remedy of a problem before contacting the Customer Service. Sometimes a perfor-
mance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. It
could save your time and money.
SYMPTOM
No power
POSSIBLE REMEDY
Make sure the power plug is connected to an AC outlet.
(In case of power failure) Check the breaker.
PAGE
9
--
•
•
No operation by remote control
7
Check if the batteries are weak or inserted incorrectly.
Replace weak batteries and insert with their polarities (+/-
signs) as indicated.
•
--
Aim the remote control at the remote sensor and operate
within 23 feet (7 m) of the unit.
•
--
34
9
Remove all obstacles to clear the path of the infrared signal.
Check the infrared signal output.
Select the correct mode to operate by pressing [SELECT].
The operable range from the unit is 10 feet (3m) within 15˚.
•
•
•
•
--
Poor or no picture
6
--
--
9
13
--
9
Check if antenna or cable is connected properly.
Check for the broken pin or wire of antenna cable.
Check for source of reception disturbance.
•
•
•
•
•
•
•
•
Press [SELECT] to select the correct mode.
Perform channel scanning to memorize available TV channels.
Try another channel. If OK, then possible station problem.
Adjust picture control (COLOR/CONTRAST/BRIGHT etc.).
Check for magnetism from nearby appliances and try
degaussing.
--
Poor or no picture in playback
Poor or no sound
15
34
--
Adjust tracking control.
Try video head cleaning.
The videotape may be old or worn. Replace with new one.
•
•
•
X
Y
].
--
--
15
Adjust volume control using [VOL.
Try another channel. If OK, then possible station problem.
Check if the unit is in Still mode or Slow motion playback.
If so, press [PLAY B] to return to normal playback.
/
•
•
•
Cannot go into recording mode
15
Make sure the cassette has an erase-prevention tab. If neces-
sary, cover the hole with plastic tape.
•
Timer recording does not work
or results in failure
19
19
10
--
Make sure the begin/end time is set correctly.
Make sure the power is off to activate timer recording.
Check if the unit’s clock is set to current time and date.
The program may contain copy protection signals that restricts
copying.
•
•
•
•
20
--
--
The timer setting overlapped with another setting has priority.
Check if the tape reached the end during recording.
Check if the power failure during recording.
•
•
•
Picture or color fades in and out
when copying a videotape
21
You cannot copy a copyrighted videotape. You are experienc-
ing copy guard protection.
•
32
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
SYMPTOM
Misspelling in captions
POSSIBLE REMEDY
PAGE
Error committed by the closed captioning production company.
--
•
•
Possible in a live broadcast. Not in case of a prerecorded pro- --
gram.
Text is not shown in its entirety
or a delay occurs from what is
being said
A few seconds of delay is common for live broadcast.
If a dialogue exceeds the display capacity (220 words per
minute), selective editing is used so that the captions remain
up-to-date with the current TV screen dialogue.
--
•
Captions scrambled with white
boxes
Caused by interferences of building, power lines, thunder-
storms, etc.
--
•
No captions in a program which The broadcast may use a time compression process to speed --
•
must contain closed caption
up the program. The decoder cannot read the compressed
information and captions will be lost.
No captions in a pre-recorded
videotape with indicated closed
captions included
Possibility of a illegal copy or an erroneous copying process
accidentally performed by the fabricator.
--
•
Black box in the TV screen
No picture
You are in TEXT mode. Select CAPTION mode or "OFF"
11
22
•
•
This unit cannot play DVD-RAM/CD-i/Photo CD/Video
CD/DVD with region codes other than "1" and "ALL".
Disc cannot be played
No sound
Clean the disc.
Place the disc correctly, with the label side up.
Cancel the parental setting or change the control level.
34
23
30
•
•
•
Correct the audio output settings.
Confirm the power and audio settings of external audio com-
ponent.
30
--
•
•
No DTS audio is output
Distorted picture
This unit does not support DTS audio. This is not a malfunc-
tion.
--
•
•
During the playback of a 2-layered disc, pictures may stop for --
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is not a malfunction.
This happens right after fast forwarding or rewinding.
--
•
Audio or subtitle language does The selected language is not available for audio or subtitle on
29
•
not match the setting
the DVD.
The camera angle cannot be
changed
The DVD does not contain sequences recorded from different
camera angles.
25
29
23
--
•
•
Audio or subtitle language can-
not be changed
The DVD does not contain audio source or subtitles in the
selected language.
"Prohibited icon" appears on the That operation is not available by the unit or the disc.
•
screen
CD/DVD sound dropout
No CD/DVD reproduction
DVD picture poor
Scratched disc. Replace with an unscratched one.
•
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s
Manual for details on correct operations.
• Playback from a desired track and random playback are not available during playback.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
AINTENANCE
M
DEGAUSSING
CABINET CLEANING
A degaussing circuit in this unit clears up color
errors on the TV screen. Color errors occur when
there is any excess magnetism close to the unit.
This circuit is designed to operate once when the
unit is first plugged in. If you see minor color
errors on the screen, unplug the unit for approx-
imately 30 minutes. When you plug the unit again,
the degaussing circuit will operate to clear errors.
Take this step any time the TV screen is accidental-
ly magnetized or when you move the unit.
• Wipe the front panel and other exterior surfaces of
the unit with a soft cloth immersed in lukewarm
water and wrung dry.
• Never use a solvent or alcohol. Do not spray
insecticide liquid near the unit. Such chemicals
may cause damage and discoloration to the
exposed surfaces.
SERVICING
• Should your unit become inoperative, do not try to
correct the problem by yourself. There are no
user-serviceable parts inside. Turn off, unplug the
power cord and please call our help line men-
tioned on the front page, to locate an Authorized
Service Center.
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clearer pic-
ture.
• Playback picture may become blurred or interrupt-
ed while the TV program reception is clear. Dirt
accumulated on the video heads after long peri-
ods of use or the usage of rental or worn tapes
can cause this problem.
If a streaky or snowy picture appears during play-
back, the video heads in your unit may need to be
cleaned.
IR SIGNAL CHECK
Use the AM radio or the digital camera to check if
the remote control properly sends out the infrared
signal. It will help to define the cause of malfunction.
Using AM radio
1. Please visit your local Audio/Video store and pur-
chase a good quality VHS Video Head Cleaner.
• Tune the AM radio to no broadcasting band.
Press any button on remote control toward
the radio. If the radio receives the signal
from remote control properly, the sound will
flutter.
2. If a Video Head Cleaner does not solve the prob-
lem, please call our help line mentioned on the
front page, to locate an Authorized Service
Center.
Using digital camera
(including built-in camera of cellular
NOTES:
phone)
• Press and hold any button on remote control
toward a digital camera. The remote control is
working if you confirm infrared light through the
digital camera.
• Remember to read the instructions included with the
video head cleaner before use.
• Clean video heads only when problems occur.
IF THE LASER OPTICAL PICKUP UNIT IS
DIRTY
DISC HANDLING
• Handle the discs so that fingerprints and dust do
not adhere to the surfaces of the discs.
• If the unit still does not perform properly when it is
operated, while referring to the relevant sections
and to “TROUBLESHOOTING GUIDE” in this
Owner’s Manual, the laser optical pickup unit may
be dirty. Consult your dealer or an Authorized
Service Center for inspection and cleaning of the
laser optical pickup unit.
• Always store the disc in its protective case when it
is not used.
• To clean-off, use a soft cloth.
• Do not use a hard cloth since this
will mar the disc.
• Wipe the disc in a straight line from center to edge.
• Never wipe with a circular motion.
• Do not use detergent or abrasive clean-
ing agents.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
PPENDIX
A
CABLE CHANNEL DESIGNATIONS
If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels
with letters or letter-number combinations. Please check with your local cable company. The following is a
chart of common cable channel designations.
CATV channel
TV Display
5A
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
A
B
14
15
CATV channel
TV Display
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
CATV channel
TV Display
R
S
T
U
V
W
W+1
37
W+2
38
W+3
39
W+4
40
W+5
41
W+6
42
W+7
43
W+8
44
W+9
45
31
32
33
34
35
36
CATV channel
TV Display
W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54
CATV channel
TV Display
CATV channel
TV Display
76
W+55 W+56 W+57 W+58
91 92 93 94
77
78
79
80
81
82
83
84
85
W+59 W+60 W+61 W+62 W+63 W+64
100 101 102 103 104 105
86
87
88
89
90
A-5
95
A-4
96
A-3
97
A-2
98
A-1
99
CATV channel
TV Display
CATV channel W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79
TV Display
106
W+80 W+81 W+82 W+83 W+84
121 122 123 124 125
107
108
109
110
111
112
113
114
115
116
117
118
119
120
CATV channel
TV Display
LANGUAGE CODE LIST
Language
Code Language
German [GER]
Code
Language
Code Language
Code
A-B
5051
5158
5758
5360
5367
5447
5569
5455
5467
Mongolian
Nauru
Nepali
5960
6047
6051
Somali
6561
5165
6567
6569
6568
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Spanish [SPA]
Sundanese
Swahili
Norwegian [NOR] 6061
O-R
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
6149
6164
6159
6247
6265
5247
6258
Hebrew
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Portuguese [POR] 6266
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
Quechua
6367
Rhaeto-Romance 6459
Irish [IRI]
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
6461
6467
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
U-Z
Kashmiri
Kazakh
Ukrainian
Urdu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
Singhalese
Siswat
Slovak
Slovenian
Faroese
Fiji
Finnish [FIN]
French [FRE]
Frisian
Galician
Georgian
5261
5256
5255
5264
5271
5358
5747
If you choose a language that has a 3 letter language
code, the code will be displayed every time you change
the AUDIO or SUBTITLE language setting. If you
choose any other languages, '---' will be displayed
instead. (3 letter language code is written in bracket.)
Marathi
Moldavian
35
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
PECIFICATIONS
S
GENERAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Sound output:
2 speakers, 1W, 8 ohm
TV/VCR
CRT:
24 inch in-line gun,
90˚ deflection tube
NTSC-M
§15.119/FCC
Rotary four-head
1/2 inch
OTHER SPECIFICATIONS
Television system:
Closed caption system:
Video Heads:
Terminals
Antenna input:
VHF/UHF/CATV
75 ohm unbalanced
(F-type)
Tape width:
Tape speed
SP:
Video input:
RCA connector × 1
RCA connector × 2
1/8" stereo (3.5 mm)
33.40 mm/sec.
16.67 mm/sec.
11.12 mm/sec.
Audio L/R input:
Headphone:
Coaxial digital
audio output:
LP:
SLP:
Tuner channel
TV VHF Low:
TV VHF High:
TV UHF:
One pin jack,
500 m Vpp (75 ohm)
Digital encoded
infrared light system
5°C to 40°C
(41°F~104°F)
AC 120 V, 60 Hz
120 W
#2~#6
#7~#13
#14~#69
Remote control:
CATV
VHF:
MID band:
SUPER band:
HYPER band:
Operating temperature:
Power requirements:
Power consumption
(Maximum):
5A
A5~A1, A~I
J~W
W+1~W+84
Picture tube:
Dimensions:
24"
H: 22-11/16" (576 mm)
DVD
Product type:
Discs:
W: 24-1/16" (612 mm)
DVD Player
DVD video, Audio CD
NTSC color
D: 19" (482 mm)
64.6 lbs. (29.3 kg)
Weight:
Output signal format:
• Designs and specifications are subject to change without notice.
• If there is a discrepancy between languages, the default language will be English.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
NDICE DE CONTENIDO
Í
PREPARATIVOS PARA EL USO . . . . . . . . . . . .37
CONEXIONES DE ANTENA/CABLE . . . . . . . . . . .37
CONEXIÓN A UN DISPOSITIVO EXTERNO
REPRODUCCIÓN . . . . . . . . . . . . . . . . . . . . . . .41
REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .41
GRABACIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . .41
GRABACIÓN NORMAL . . . . . . . . . . . . . . . . . . . . .41
GRABACIÓN CON TEMPORIZADOR
(FRONTAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL
(TRASERA) . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
AUTOMÁTICO . . . . . . . . . . . . . . . . . . . . . . . . . .42
SECCIÓN TV/VCR
SECCIÓN DVD
FUNCIONAMIENTO Y AJUSTES DEL
REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .43
MENÚ DE DISCO/MENÚ DE TÍTULO . . . . . . . . . .43
TELEVISOR . . . . . . . . . . . . . . . . . . . . . . . . . .39
PARA VER UN PROGRAMA DE TELEVISIÓN . . . .39
AJUSTE DEL RELOJ . . . . . . . . . . . . . . . . . . . . . .39
AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . .40
IDIOMA DE MENÚ DE PANTALLA . . . . . . . . . . . . .40
REPARATIVOS PARA EL USO
P
CONEXIONES DE ANTENA/CABLE
Enchufe el cable entrante en la toma ANT., en la parte trasera de la unidad.
Si su servicio de cable le suministra una caja convertidora o si usted utiliza un sistema de satélite, conecte
la caja con esta unidad, como se indica a continuación.
Cable
Señal de TV
Antena
o
ANT.
A
U
D
I
O
O
U
T
COAXIAL
Cable entrante desde antena
casera/empresa de cable (sin
caja de cable)
Parte trasera de la
unidad
ANT.
Caja de cable o caja de satélite*
*NOTA
(NO DESCONECTAR DE LA CAJA)
Algunos sistemas de TV por cable utilizan
señales cifradas y requieren un convertidor
especial para recibir estos canales.
Consulte con su empresa de cable local.
OUT
O
IN
Cable entrante desde empresa de cable
o antena de satélite
NOTA:
Para su seguridad y
Patilla doblada
Antes de enchufar la antena en la
toma ANT. de la unidad, compruebe
que la patilla no está doblada. Si
está doblada, enderece la patilla
como se indica en la ilustración y
enchufe la patilla a la toma ANT. de
la unidad.
para evitar daños en la
unidad, desenchufe el
cable de la antena de la
toma ANT. antes de
mover la unidad.
Cable
Enchufe
(Debe ser
enderezada)
(Patilla recta)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
ES
PREPARATIVOS PARA EL USO
CONEXIÓN A UN DISPOSITIVO EXTERNO (FRONTAL)
Cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice
las tomas de entrada AUDIO/VIDEO en la parte frontal de la unidad.
Conecte las tomas de salida de Audio/Video de otra fuente a las tomas AUDIO L/R y
VIDEO de esta unidad.
AUX
A continuación, utilice [SELECT] o [CH.
K
/
L
] hasta que aparezca "AUX" en la pantalla.
STOP
EJECT
HEADPHONE
POWER
SELECT
VIDEO
L
AUDIO
R
VOLUME
SKIP
PLAY SKIP
STOP
OPEN/CLOSE
CHANNEL
REC/OTR
REW
PLAY
F.FWD
SEARCH
DVD
TV/VCR
Por ejemplo,
videograbadora o
videocámara, etc.
Parte
frontal de
la unidad
A las tomas de salida de audio
(ENTRADA)
Cable de audio
(disponible en el mercado)
(SALIDA)
HEADPHONE
–
–
VIDEO
L
AUDIO
R
(ENTRADA)
A la toma de salida de vídeo
Cable de vídeo (disponible en el mercado)
(SALIDA)
NOTA:
Cuando conecte una VIDEOGRABADORA monoaural (otra fuente) a esta unidad, conecte la toma de salida de audio de
la videograbadora monoaural (otra fuente) a la toma AUDIO L de esta unidad. El sonido saldrá igualmente por ambos
canales L y R (izquierdo y derecho).
CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL (TRASERA)
Puede conectar esta unidad a un dispositivo de audio digital para disfrutar del sonido digital de DVD.
Conecte a un amplificador equipado con tomas de entrada digital, tales como una platina MD o DAT. Para
reproducir un disco DVD en un formato ambiental multicanal Dolby Digital en esta unidad, conéctela a un
decodificador Dolby Digital.
Utilice un cable coaxial digital de audio (disponible en el mercado) para las conexiones de audio.
ANT.
AUDIO OUT
COAXIAL
AUDIO OUT
COAXIAL
A la toma AUDIO OUT
COAXIAL
(SALIDA)
(Solamente DVD AUDIO
OUT)
Decodificador
Dolby Digital
A la toma de entrada de
audio coaxial digital
o
(ENTRADA)
Cable de audio coaxial digital
(disponible en el mercado)
Platina MD,
platina DAT, etc.
A la toma de entrada de
audio coaxial digital
(ENTRADA)
NOTAS:
• La fuente de audio de un disco en formato ambiental multicanal Dolby Digital no puede ser grabado como sonido digital
por una platina MD o DAT.
• Asegúrese de apagar todos los dispositivos del sistema antes de conectar otro dispositivo.
• Consulte los manuales del usuario de los dispositivos que van a conectarse a la unidad.
• Para conectar a una platina MD o DAT, ajuste "DOLBY DIGITAL" en "PCM" para la salida de audio en el modo de
ajuste, y para conectar a un decodificador Dolby Digital, ajuste en "BITSTREAM" (consulte "AUDIO SETTING" en
página 30). Utilizar una unidad con unos ajustes incorrectos puede generar distorsión de ruido y puede asimismo dañar
los altavoces.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
ES
SECCIÓN TV/VCR
UNCIONAMIENTO Y AJUSTES DEL TELEVISOR
F
PARA VER UN PROGRAMA DE TELEVISIÓN
AJUSTE DEL RELOJ
Ajuste correctamente el reloj de la
unidad para grabación con temporizador
1 Después de finalizar la conexión de la
antena o del cable, conecte el cable de
alimentación a una toma estándar de
CA.
para videograbadora. Se sugiere ajustar el reloj
manualmente cuando se configure por primera vez
la unidad, y luego fijar el ajuste automático del reloj
en "ON" para corregir la hora periódicamente.
2 Presione [POWER] para encender la unidad.
K
L
] o los botones numéricos
3 Utilice [CH.
/
NOTA:
• Si no pude recibir una emisora con las señales
horarias, el ajuste automático del reloj no estará
disponible. Utilice únicamente el ajuste manual.
para seleccionar el número de canal deseado.
Para utilizar los botones numéricos
•Canales de un dígito: (Ej.: 02, 03, 04, etc.)
Presione primero [0] para seleccionar un canal de un
dígito.
AJUSTE MANUAL DEL RELOJ
En el siguiente ejemplo, el reloj está ajustado en:
•Canales de dos dígitos: (Ej.: 12, 38, 95 ...)
Presione dos dígitos directamente.
FECHA:
5 de mayo de 2006
5:40PM
•Canales de tres dígitos: (Ej. 115, 125 ...)
Presione primero [+100], y luego presione los últimos
dos dígitos.
HORA DE AJUSTE:
- TV/VCR PREP. -
COMO PROGRAMAR
AJUSTE RELOJ
AJUSTE DE CANAL
AJUSTE DE USER
AJUSTE DE V-CHIP
ANGUAGE [ENGLISH]
1 Presione [SET-UP].
Utilice [K / L] para ir hasta
"AJUSTE RELOJ", y presione
[ENTER].
B
4 Utilice [VOL. X / Y] para ajustar el volumen.
Presione [MUTE] para
VOLUMEN 20
silenciar al instante el sonido.
– AJUSTE RELOJ –
2 Utilice [K / L] para ir hasta
"AJUSTE MANUAL RELOJ", y
presione [ENTER].
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
RELOJ AUT.
[ON]
Presione de nuevo para
restaurar el nivel de sonido
anterior.
BUSQ. AUTO RELOJ CA.
CAN. RELOJ AUT.
[ 02 ]
B
AJUSTE MANUAL RELOJ
• Si no hay ninguna emisora local
PBS en su zona o en su sistema
HORA VER.
[OFF]
NOTA:
• Incluso aunque apague la unidad en el modo DVD,
la unidad estará en el modo TV/VCR cuando vuelva
a encenderse.
de cable, seleccione "RELOJ AUT." y presione
[ENTER] para desactivar la función antes de este
paso.
– AJUSTE MANUAL RELOJ –
PARA VER UN CANAL DE CABLE O SATÉLITE
3 Utilice [K / L] para ajustar los
datos deseados de mes, día,
año, hora y minuto.
MES
0 5
DIA
AÑO
Si la unidad está conectada a una caja de cable o
de satélite, utilice [CH. K / L] para seleccionar
CA3 o CA4 según el ajuste de canal de salida del
dispositivo y seleccionar el canal deseado en dicho
dispositivo.
/
:
0 5 VIE
2 0 0 6
HORA
0 5
MINUTO
4 0 PM
Utilice [s / B] para pasar a
otro elemento.
4 Presione [SET-UP].
5:40 PM
Aunque los segundos no se
muestran, se comienzan a
contar desde 00 cuando se
PARA VER UNA ENTRADA EXTERNA
Cuando un equipo externo esté
AUX
conectado a las tomas de entrada
frontales AUDIO/VIDEO, presione
[SELECT] o [CH. K / L]
repetidamente hasta que
aparezca "AUX" en la pantalla.
presiona [SET-UP]. Utilice esta función para
sincronizar el reloj con la hora correcta.
NOTA:
• Cuando desenchufe el cable de CA o si hay un corte
del suministro eléctrico durante más de 3 segundos,
es posible que tenga que reajustar el reloj.
NOTA:
• Si no hay entrada de señal del terminal de antena ni
se hace funcionar durante 15 minutos, el TV se
apagará automáticamente.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
ES
SECCIÓN TV/VCR
FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR
AJUSTE DE CANAL
IDIOMA DE MENÚ DE PANTALLA
Es necesario preseleccionar el canal al
principio o en caso de haber movido el
televisor a una zona distinta.
Puede seleccionar el idioma del menú
de pantalla entre inglés, español y
francés.
1 Presione [SET-UP].
- TV/VCR PREP. -
COMO PROGRAMAR
AJUSTE RELOJ
AUTOPROGRAMACIÓN DEL CANAL
Utilice [K / L] para ir hasta
AJUSTE DE CANAL
AJUSTE DE USER
AJUSTE DE V-CHIP
1 Presione [SET-UP].
- TV/VCR PREP. -
COMO PROGRAMAR
AJUSTE RELOJ
"IDIOMA".
ESPAÑOL
[ ]
B
IDIOMA
TÍTULO [OFF]
ZERO RETURN
Utilice [K / L] para ir hasta
B
AJUSTE DE CANAL
AJUSTE DE USER
AJUSTE DE V-CHIP
"AJUSTE DE CANAL", y
presione [ENTER].
ESPAÑOL
[ ]
IDIOMA
TÍTULO [OFF]
ZERO RETURN
2 Presione [ENTER] repetidamente para
seleccionar "ENGLISH", "ESPAÑOL" o
"FRANÇAIS".
2 Utilice [K / L] para ir hasta
"AUTOPROGRAMACIÓN DE
CA.", y presione [ENTER].
– AJUSTE DE CANAL –
AGREGAR / BORRAR (CATV)
AUTOPROGRAMACIÓN DE CA.
3 Presione [SET-UP] para salir del menú.
B
NOTAS:
El sintonizador explora y memoriza todos los
canales activos de su zona .
• Esta función afecta solamente al idioma del menú de
pantalla y no a la fuente de sonido.
• Si por alguna razón el menú ya está en inglés o en
francés, presione [SET-UP] y mediante [K / L] vaya
a "LANGUAGE [ENGLISH]" o "LANGAGE
[FRANÇAIS]", y presione [ENTER] repetidamente
para seleccionar el idioma deseado, y presione [SET-
UP].
3 Cuando la exploración ha
finalizado, se muestra el canal
memorizado más bajo.
CA 15
<EJEMPLO>
Si en la pantalla del televisor
aparece "NO HAY SEÑAL DE
TV", compruebe la conexión
de la antena y vuelva a
intentar.
NO HAY SEÑAL DE TV
NOTAS:
• La unidad puede reconocer canales de CATV como
canales de TV si el estado de la recepción es
deficiente. En tal caso, compruebe la conexión de la
antena y vuelva a intentar "AUTOPROGRAMACIÓN
DE CA.".
• La autoprogramación del canal NO es necesaria
cuando está conectado a una caja de cable o de
satélite. Simplemente seleccione el canal para
entrada de caja de cable o de satélite (ej. CA3 o
CA4) en la unidad, y seleccione el canal deseado
en la caja de cable o de satélite.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
ES
EPRODUCCIÓN
RABACIÓN
R
G
REPRODUCCIÓN BÁSICA
NOTAS:
• Inserte una cinta de casete con la lengüeta de
protección contra borrado sin quitar.
• Esta unidad no puede grabar el contenido del DVD
incorporado.
1 Inserte una cinta pregrabada para
encender la unidad
automáticamente (Auto Power
On/Actividad automática).
• SOLAMENTE podrá ver el mismo programa de
televisión que se esté grabando.
2 Seleccione el modo TV/VCR
presionando [SELECT].
GRABACIÓN NORMAL
NOTA:
•
Si se ha quitado la lengüeta de protección contra
CA 10
borrado, la unidad cambiará en el modo VCR y
empezará la reproducción automáticamente.
1 Utilice [CH. K / L] o los
botones numéricos para
seleccionar el canal donde se
va a grabar.
3 Para iniciar la reproducción,
B
REPRODUCIR
presione [PLAY B].
NOTA:
NOTA:
• Si la unidad está conectada a una caja de cable o
de satélite, deberá estar en CA3 o CA4. Seleccione
en la caja de cable o de satélite el canal donde se
va a grabar.
•
Incluso en el modo DVD, puede iniciar la reproducción
en videograbadora si presiona [PLAY
frontal (del lateral de TV/VCR).
B
] en el panel
PARAR
4
5
Para interrumpir la reproducción,
2 Presione [SPEED] para
presione [STOP
C
].
seleccionar la velocidad de
SP
E
D
REBOBINAR
AV RAPIDO
Para rebobinar la cinta, presione
[REV ].
Para hacer avanzar la cinta,
presione [FWD ].
Para interrumpir el movimiento de
la cinta, presione [STOP ].
cinta deseada (SP/SLP).
(Consulte "SELECTING TAPE
SPEEDS" en página 15.)
E
D
3 Presione [REC] para iniciar la
GRABAR
grabación.
C
A
EXPULSAR
6
Para expulsar la cinta de la unidad,
presione [STOP/EJECT C A] en el
panel frontal.
SP
AJUSTE DE SEGUIMIENTO
4 Presione [PAUSE F] para
PAUSA
interrumpir temporalmente la
•
El ajuste de seguimiento se establecerá automáticamente
al iniciar la reproducción (función de seguimiento digital).
Si aparecen líneas de ruido (rayas negras y blancas) en la
grabación de escenas no
deseadas.
Presione [PAUSE F] de
nuevo o [REC] para reanudar
la grabación.
•
imagen de reproducción, utilice [CH.
K
/
L
] hasta que las rayas
SP
desaparezcan (ajuste de seguimiento manual). Esto también
está disponible en el modo Pausa/Imagen fija/Cámara lenta.
Para desactivar el modo de seguimiento manual, pare
la cinta una vez e inicie de nuevo la reproducción.
•
NOTA:
• Si la grabación se mantiene en pausa durante más
de 5 minutos, la unidad pasará automáticamente al
modo de grabación para que la cinta no sufra daños.
IMAGEN FIJA
• Durante la reproducción, presione [PAUSE F]
para congelar la imagen.
Puede avanzar la imagen fotograma a fotograma
presionando repetidamente [PAUSE F].
5 Presione [STOP C] para interrumpir la
grabación.
•
Para desactivar el modo de imagen fija, presione [PLAY
B
].
CÁMARA LENTA
• Durante la reproducción, presione [PAUSE F] y, a
continuación presione [FWDD ].
•
Para desactivar el modo de cámara lenta, presione [PLAY
B
].
NOTA:
•
Si la unidad se mantiene en el modo cámara lenta o imagen fija durante
más de 5 minutos, entrará automáticamente en el modo de parada.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
ES
GRABACIÓN CON TEMPORIZADOR AUTOMÁTICO
– COMO PROGRAMAR –
CA FECHA INICIO FINAL
61 7/03 LUN 7:30P
- - -/- - - - - -:- -
- - -/- - - - - -:- -
K
L
] para ajustar la hora
5
6
Utilice [
y el minuto de inicio/fin deseados.
Presione [ ] para pasar al
siguiente elemento.
/
M
8:50PM- -
-:- - - -
-:- - - -
Puede ajustar ocho programas para grabar en
días concretos, diariamente o semanalmente,
dentro de un periodo de un año.
B
B
En el siguiente ejemplo, el temporizador está
ajustado para grabar:
– COMO PROGRAMAR –
CA FECHA INICIO FINAL
61 7/03 LUN 7:30P 8:50P
SP
Utilice [
K
/
L
] hasta que aparezca la
velocidad de cinta deseada.
(Consulte "SELECTING TAPE SPEEDS"
en página 15.)
M
M
B
- - -/- - - - - -:- -
- - -/- - - - - -:- -
-:- - - -
-:- - - -
FECHA:
3 de julio de 2006
de7:30PM a 8:50PM
CA61
HORA DE AJUSTE:
CANAL:
7 Presione [ENTER] para finalizar el ajuste.
VELOCIDAD DE CINTA: SP
•
Para ajustar otro programa, repita los pasos 2 a 7.
• Para corregir el programa durante el ajuste,
presione [s] para retroceder un paso y utilice
[K / L] para introducir los números correctos.
• Presione [SET-UP] para salir del menú.
- TV/VCR PREP. -
1 Presione [SET-UP].
B
COMO PROGRAMAR
AJUSTE RELOJ
Utilice [K / L] para seleccionar
"CÓMO PROGRAMAR", y
presione [ENTER].
AJUSTE DE CANAL
AJUSTE DE USER
AJUSTE DE V-CHIP
IDIOMA [ESPAÑOL]
CAPTION [OFF]
8 Presione [POWER] para ajustar la grabación
con temporizador automático.
NOTA:
El indicador de grabación se enciende.
• Si todavía no ha ajustado el reloj, aparece el menú
"AJUSTE MANUAL RELOJ". Ajuste la hora y la
fecha actuales (consulte "AJUSTE MANUAL DEL
RELOJ" en página 39) e inicie el ajuste de la
grabación con temporizador.
NOTAS:
• DEBE apagar la unidad para activar la grabación
con temporizador automático.
•
Si no se apaga la unidad y sigue
usted viendo la televisión, "PRG.
ESTAR LISTO" empieza a parpadear
en la pantalla del televisor 2 minutos
antes de la hora de inicio programada.
– COMO PROGRAMAR –
2 Utilice [K / L] para seleccionar
PRG. ESTAR LISTO
CA FECHA
INICIO FINAL
la posición del programa
- - -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
-:- -
-:- -
-:- -
-:- -
- -
- -
- -
- -
B
deseado y presione [B].
•
Asegúrese de insertar una cinta con lengüeta de
protección contra borrado antes de apagar la unidad.
Si la cinta no tiene la lengüeta, será expulsada
cuando se presione [POWER] para apagar.
– COMO PROGRAMAR –
3 Utilice [K / L] hasta que
aparezca el número del canal
deseado y presione [B].
CA FECHA INICIO FINAL
61 -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
-:- -
-:- -
-:- -
- -
- -
- -
B
9 En la hora de inicio programada, la unidad
NOTA:
•
empieza a grabar.
Si la unidad está conectada a una cajade cable o de
NOTAS:
satélite, deberá estar en CA3 o CA4. Seleccione en la
caja de cable o de satélite el canal donde se va a grabar.
• La grabación comienza sin encenderse la pantalla
del televisor.
• Durante la grabación, puede ver solamente el
programa de televisión que se esté grabando
actualmente o una reproducción de DVD.
Presione [POWER] y [SELECT] para seleccionar el
modo deseado.
4 Ajuste la fecha de inicio.
– COMO PROGRAMAR –
CA FECHA INICIO FINAL
Para una única grabación :
Presione [K] hasta que
aparezca la fecha deseada. A
continuación, presione [B].
61 7/03 LUN -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -- -
-:- -
-:- -
-:- -
-:- - - -
- -
- -
- -
B
•
Si la cinta se acaba antes de la hora de finalización, la grabación
se interrumpe inmediatamente y la cinta es expulsada.
– COMO PROGRAMAR –
Para una grabación cada día
Para grabar el mismo canal a la
misma hora cada día.
:
CA FECHA INICIO FINAL
PARA CONFIRMAR EL PROGRAMA
61 CADA DIA -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
-:- - - -
-:- - - -
-:- - - -
B
1 Presione [POWER] para encender la unidad.
L
Presione [ ] hasta que
(El indicador de grabación se apaga.)
aparezca "CADA DÍA", y
2 Presione [SET-UP].
presione [B].
Utilice [K / L] para seleccionar "CÓMO
PROGRAMAR", y presione [ENTER].
– COMO PROGRAMAR –
CA FECHA INICIO FINAL
Para una grabación semanal
Para grabar el mismo canal a la
misma hora cada semana.
:
61 CADA LUN -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
- -/- - - - - -
-:- -
-:- -
-:- -
-:- - -
- -
- -
- -
B
3 Confirme los detalles de los programas que
L
Presione [ ] hasta que aparezca"CADA" y su
aparecen en la pantalla del televisor.
día deseado de la semana (por ejemplo, "Cada
lunes"), y presione [B].
4 Presione [SET-UP] para salir del menú.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
ES
SECCIÓN DVD
AVANCE RÁPIDO / RETROCESO RÁPIDO
REPRODUCCIÓN BÁSICA
• Durante la reproducción, mantenga
presionado [FWD D] para avance
rápido o [REV E] para retroceso rápido.
• Cada vez que mantenga
1 Presione [POWER] para
encender la unidad.
D1
2 Presione [OPEN/CLOSE A] en la unidad.
presionado el botón, la
reproducción se acelera y el
nivel de velocidad aparece en la pantalla.
3 Coloque el disco en la
bandeja, con la etiqueta hacia
arriba.
NOTAS:
•
En los discos DVD, la velocidad de avance/retroceso
rápido es diferente según el disco. La velocidad
aproximada es 1 (×2), 2 (×8), 3 (×20), 4 (×50) y 5 (×100).
• En discos de CD de audio la velocidad aproximada
es 1 (×2), 2 (×8) y 3 (×30).
• Cuando utilice los botones del panel frontal, utilice
[SEARCH E / D].
4 Presione [PLAY B].
• La bandeja se cerrará automáticamente y se
empezará la reproducción. Cuando reproduzca un
DVD que incluya un menú de títulos, este menú
puede aparecer en pantalla.
•
Para volver a la reproducción normal, presione [PLAY
B
].
NOTAS:
AVANCE LENTO / RETROCESO LENTO
• Cerrar la bandeja del disco manualmente o
presionando [OPEN/CLOSE A] también inicia la
reproducción.
•
Durante la reproducción, presione [PAUSE
F
].
• Mantenga presionado [FWD D] para
• Con discos DVD que utilicen títulos para señales de
programa de reproducción, la reproducción puede
comenzar desde el segundo título o puede omitir
dichos títulos.
avance lento o [REV E] para retroceso lento.
• Cada vez que mantenga
presionado el botón, la
1
reproducción se ralentiza y el
nivel de velocidad aparece en la pantalla.
5 Para congelar la imagen, presione [PAUSE F]
durante la reproducción.
NOTAS:
• La velocidad de avance/retroceso lento varía según
NOTA:
el disco. La velocidad aproximada es 1 (1/16), 2 (1/8)
y 3 (1/2).
• El sonido se silenciará en modo de pausa.
• Cuando utilice los botones de la unidad principal,
utilice [SEARCH E / D].
6 Presione [STOP C] para
REANUDACIÓN ACTIVADA
interrumpir temporalmente la
Presione 'PLAY' para reproducir
desde aquí.
Para reproducir desde el inicio,
primero presione 'STOP' y luego
'PLAY'.
• Para volver a la reproducción normal, presione
[PLAY B].
reproducción.
• Presione [PLAY B] para
reanudar la reproducción.
• Para cancelar la reanudación y parar el disco,
presione [STOP C] de nuevo.
MENÚ DE DISCO/MENÚ DE TÍTULO
Un DVD puede contener menús para explorar
el disco y acceder a funciones especiales.
NOTAS:
• La información de reanudación se conserva aunque
se apague la unidad.
1 Presione [DISC MENU] o [TITLE].
• Puede aparecer un "icono
prohibido" en la zona superior
derecha de la pantalla del
•
•
Aparecerá el menú principal/menú de título del DVD.
Puede activar el menú incluso durante la reproducción.
televisor durante la operación. Esto significa que la
operación no está disponible en el disco.
2 Utilice [K / L / s / B] para seleccionar un
elemento y presione [ENTER].
NOTAS:
REPRODUCCIÓN PASO A PASO
• SI el disco tiene un menú de disco, aparecerán
distintas opciones de selección: idioma de sonido,
subtítulos, capítulos del título y otras.
• El contenido del menú y las correspondientes
operaciones de menú pueden variar según los
discos. Para más detalles, consulte el manual que
acompaña el disco.
• Durante la reproducción, presione
[PAUSE F].
Puede avanzar la imagen fotograma a fotograma
presionando repetidamente [PAUSE F].
• Para volver a la reproducción normal, presione
[PLAY B].
43
Download from Www.Somanuals.com. All Manuals Search And Download.
ES
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or work-
manship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year
from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are
excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the
date of original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER
WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized service center. This limited warranty does not
apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal
use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alter-
ations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse,
mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as
hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of
God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR
ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED
BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE
PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SER-
VICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHO-
RIZED SERVICE CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT
FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITH-
OUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its
original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SER-
VICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service
providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,
please contact us at:
FUNAI CORPORATION
Customer Service
Tel :1-800-968-3429
19900 Van Ness Avenue, Torrance, CA 90501
Printed in Malaysia
1EMN21639
T2220UA★★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
|