Installation Guide
Adapter for SAP R/3
Version 3.9
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
About This Book............................................................................................................................ v
CHAPTER 1
Example Log File..................................................................... 11
Suggestions for Converting IDocs........................................... 11
Example Conversion Tool Configuration File.......................... 12
Converting BAPI Formats .............................................................. 14
Upgrading Rules ............................................................................ 15
CHAPTER 2
Preparing the Installation Environment .......................................... 24
Previous versions.................................................................... 24
CIMRepository......................................................................... 25
Temporary Installation Directory ............................................. 26
Installing Adapter for SAP R/3 ....................................................... 26
Understanding Environment Variables........................................... 32
Installation Guide
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
CHAPTER 3
Uninstalling Adapter for SAP R/3................................................. 33
Starting the Repository................................................................... 33
Uninstalling Adapter for SAP R/3 3.9............................................. 34
Uninstalling Shared Components................................................... 34
Index ............................................................................................................................................. 37
iv
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Book
Audience
The primary user of this document is the system administrator who is
responsible for the installation and configuration of the server used for
New Era of Networks Adapter for SAP R/3 (Adapter for SAP R/3).
How to use this book
This document describes how to install Adapter for SAP R/3. These
instructions provide information for both a new and an upgrade
installation. For a concurrent installation, contact technical support.
The guide is organized into the following chapters:
•
•
•
•
“About This Book” provides documentation, technical support, and
product education information.
Chapter 1, “Migrating to Adapter for SAP R/3 Version 3.9” provides
information to prepare for an upgrade installation.
Chapter 2, “Installing Adapter for SAP R/3” provides steps to
prepare for and run an adapter installation.
Chapter 3, “Uninstalling Adapter for SAP R/3” provides the steps for
uninstalling the product from the server.
Related documents
This section describes the available documentation for Adapter for SAP
R/3.
Cross-Platform Documentation The following documentation
comprises the Adapter for SAP R/3 documentation set:
•
•
•
User’s Guide
Feature Guide
Installation Guide
Related Documentation The following open transport documents and
sample configuration files are referenced in this document set to supply
you with specific information that supports this product:
•
•
•
File Driver Configuration Guide, release 2.6
MQ Series Driver Configuration Guide, release 2.6
MSMQ Driver Configuration Guide, release 2.6
Installation Guide
v
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
JMS Driver Configuration Guide, release 2.6.1
Tibco Driver Configuration Guide, release 2.6.1
Other related documentation is available from New Era of Networks and
Sybase. Refer to documentation from each of these companies for more detail
about use of applications relevant to this product.
Other sources of
information
Use the Sybase Technical Library CD and the Technical Library Product
Manuals web site to learn more about your product:
•
The Technical Library CD contains product manuals and is included with
your software. The DynaText reader (included on the Technical Library
CD) allows you to access technical information about your product in an
easy-to-use format.
Refer to the Technical Library Installation Guide in your documentation
package for instructions on installing and starting the Technical Library.
•
The Technical Library Product Manuals web site is an HTML version of
the Technical Library CD that you can access using a standard web
browser. In addition to product manuals, you will find links to
EBFs/Updates, Technical Documents, Case Management, Solved Cases,
newsgroups, and the Sybase Developer Network.
To access the Technical Library Product Manuals web site, go to Product
Sybase EBFs and
software updates
❖
Finding the latest information on EBFs and software updates
1
Point your web browser to the Sybase Support Page at
2
Select EBFs/Updates. Enter user name and password information, if
prompted (for existing web accounts) or create a new account (a free
service).
3
4
5
Select a product.
Specify a time frame and click Go.
Click the Info icon to display the EBF/Update report, or click the product
description to download the software.
vi
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Book
❖
Creating a personalized view of the Sybase web site (including support
pages)
Set up a MySybase profile. MySybase is a free service that allows you to create
a personalized view of Sybase web pages.
1
Point your web browser to Technical Documents at
2
Click MySybase and create a MySybase profile.
Conventions
The formatting conventions used in this manual are:
Formatting example To indicate
command names and
method names
When used in descriptive text, this font indicates
keywords such as:
•
•
Command names used in descriptive text
C++ and Java method or class names used in
descriptive text
•
Java package names used in descriptive text
Italic font indicates:
myCounter variable
Server.log
myfile.txt
•
•
•
•
Program variables
Parts of input text that must be substituted
Directory and file names.
Book titles
User Guide
A backward slash (“\”) indicates cross-platform
directory information. A forward slash (“/”)
applies to information specific only to UNIX.
sybase\bin
Directory names appearing in text display in
lowercase unless the system is case sensitive.
“About This Book”
File > Save
References to chapter titles have initial caps and
are enclosed within quotation marks.
Menu names and menu items are displayed in plain
text. The angle bracket indicates how to navigate
menu selections, such as from the File menu to the
Save option.
The vertical bar indicates:
parse|put|get
Name|Address
•
•
Options available within code
Delimiter within message examples
Monospace font indicates:
create table
•
Information that you enter on a command line
or as program text.
table created
•
Example output fragments
Installation Guide
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Formatting example To indicate
Type the Name of the GUI field or button name that is the recipient of a
attribute.
procedural action.
Click Apply.
If you need help
Each Sybase installation that has purchased a support contract has one or more
designated people who are authorized to contact Sybase Technical Support. If
you cannot resolve a problem using the manuals or online help, please have the
designated person contact Sybase Technical Support or the Sybase subsidiary
in your area.
For more information on Support Services, education, and consulting services,
refer to the Customer Services Reference Guide.
viii
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
1
Migrating to Adapter for SAP R/3
Version 3.9
Topic
Page
Process Overview
1
Preparing for Upgrade
3
Changes to Configuration Keys
Upgrading from Version 3.0.3 to Version 3.9
Upgrading from Version 3.8 to Version 3.9
Converting IDoc Formats
Converting BAPI Formats
Upgrading Rules
3
2
3
5
14
15
Process Overview
For Windows, Solaris, AIX, and HP-UX, the following procedures
comprise the migration process:
•
Transferring configuration information from the old configuration
files to the new configuration files using Table 1-1 as a guide for key
mapping.
•
•
Running the IDoc format conversion tool (if applicable)
Loading BAPI formats using the 3.9 adapter and map fields
Installation Guide
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for Upgrade
Preparing for Upgrade
Note Existing database refers to the database you are currently using.
Target database refers to the database you will use with Adapter for SAP R/3
version 3.9.
Before migrating formats and rules from an existing database to your target
database, verify the following:
•
•
•
Existing database contains valid rules and formats.
Integration Server is installed.
Target database and temporary database are instantiated, contain no data,
and allows sufficient space for rules and formats.
•
Adapter for SAP R/3 version 3.9 is installed.
Warning! When upgrading formats and rules to a target database, you
must have three separate database instances: your existing database, a
temporary database, and your target database. Do not attempt to rebuild
your current database after exporting all the data.
Upgrading from Version 3.0.3 to Version 3.9
Upgrading from Adapter for SAP R/3 version 3.0.3 to version 3.9 consists of
the following steps:
•
Transfer user-specific configuration information from the version 3.0.3
configuration files to version 3.9 configuration files.
on page 3 for a table of changes to configuration keys between versions.
•
•
Reload BAPI formats using Adapter for SAP R/3 version 3.9. You must
crate new rules for these formats.
Migrate IDoc formats using the procedure described in “Converting IDoc
Formats” on page 5.
2
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Migrating to Adapter for SAP R/3 Version 3.9
Upgrading from Version 3.8 to Version 3.9
Upgrading from Adapter for SAP R/3 version 3.8 to version 3.9 consists of the
following steps:
•
Transfer user-specific configuration information from the version 3.8
configuration files to version 3.9 configuration files.
on page 3 for a table of changes to configuration keys between versions.
•
•
BAPI formats have not changed between versions 3.8 and 3.9. You can
continue to use the BAPI formats you used with version 3.8.
Migrate IDoc formats using the procedure described in “Converting IDoc
Formats” on page 5.
Changes to Configuration Keys
If you use the GUI to import your pre-3.9 configuration files, some of the keys
will be automatically mapped to the keys required by 3.9. You will have to
make some manual changes to the configuration file before you use it.
Alternatively, you can make all changes manually.
Note Appendix A of the Adapter for SAP R/3 User’s Guide contains a list of
all currently valid configuration keys.
The following keys and values must be changed in your configuration files.
You can use the sample configuration files that are provided with the new
installation. Manually transfer existing values for keys from your existing
configuration files into the new configuration files based on the sample files
provided.
This list contains keys that are typically used in configuration files but may not
be all of the keys you have used. See the Adapter for SAP R/3 User’s Guide for
a specific version for a complete list of configuration keys for that version.
Table 1-1: Product Upgrade Keys and Mapping
Version 3.0.3
Version 3.8
Version 3.9
queue.mgr.name
NNMQS_SES_OPEN_QMGR
same as 3.8
Installation Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Changes to Configuration Keys
Version 3.0.3
Version 3.8
Version 3.9
queue.in.name=TO_SAP
NNOT_TIL_OPEN_TSI=TO_S same as 3.8
AP
queue.out.name=FROM_SAP
failurequeue.name=FAILURE
NNOT_TIL_OPEN_TSI=FRO
M_SAP
same as 3.8
NNOT_TIL_OPEN_TSI=FAIL same as 3.8
URE
queue.empty_queue_wait_time transport.wait_time_milli
_milli
not used
queue.empty_queue_wait_time transport.wait_time
same as 3.8
same as 3.8
same as 3.8
queue.exit_it_empty
error.logfile
transport.exit_if_empty
no equivalent key
Default error log is
NNSYMessageLog.nml
no.special.char
no equivalent key
sap.retry.count and
sap.retry interval
same as 3.0.3
same as 3.0.3
same as 3.0.3
same as 3.0.3
same as 3.0.3
same as 3.0.3
same as 3.0.3
same as 3.0.3
same as 3.8
same as 3.8
sap.reconnectAttempts
sap.rfc.destination
sap.client
sap.destination
same as 3.0.3
same as 3.0.3
same as 3.0.3
same as 3.0.3
sap.trace
sap.user
sap.password
sap.language
sap.rfc.trace
sap.logLevel
same as 3.0.3
same as 3.0.3
sap.logFile
Adapter.adapter
NN.LinkMode
same key but value has changed same as 3.8
same as 3.0.3
sap.linkMode
sap.inboundMethod
Adapter.batch.size
sap.createIDocReport
not used
NN.InboundMethod
NN.IDocBatchSize
NN.CreateIDocReport
NN.IDocTrace
same as 3.0.3
same as 3.0.3
same as 3.0.3
same as 3.0.3
NNLogFileName
NN.VerboseLog
MQS.QueueManagerName
MQS.GetQueueName
MQS.PutQueueName
MQS.ErrorQueueName
RFC.Destination
same as 3.0.3
sap.logFile
same as 3.0.3
sap.verboseLog
same as 3.8
NNMQS_SES_OPEN_QMGR
NNOT_TIL_OPEN_TSI
NNOT_TIL_OPEN_TSI
NNOT_TIL_OPEN_TSI
same as 3.0.3
same as 3.8
same as 3.8
same as 3.8
sap.destination
4
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Migrating to Adapter for SAP R/3 Version 3.9
Version 3.0.3
RFC.ClientCode
RFC.UserName
RFC.Password
Version 3.8
Version 3.9
sap.client
same as 3.0.3
same as 3.0.3
sap.user
same as 3.0.3
sap.password
sap.language
sap.trace
RFC.Language
RFC.Trace
same as 3.0.3
same as 3.0.3
no equivalent key
no equivalent key
no equivalent key
no equivalent key
no equivalent key
no equivalent key
no equivalent key
no equivalent key
no equivalent key
RFC.ReqWait
sap.reqWait
RFC.ConnectRetries
NN.retry.count
NN.retry.interval
SAP.reqWait
sap.connectRetries
sap.retry.count
sap.retry.interval
sap.reqWait
SAP.Destination.Out
SAP.Destination.In
SAP.retry.count
SAP.retry.interval
sap.destination.out
sap.destination.in
sap.retry.count
sap.retry.interval
Converting IDoc Formats
You must convert the formats for both IDocs and BAPIs when you move
between versions of Adapter for SAP R/3. Custom formats can continue to use
names that begin with unique prefixes to differentiate them from standard
formats.
You need to migrate your IDoc formats to accommodate the following
situations:
•
•
•
SAP has modified an IDoc structure.
Even if you made no changes to the adapter, this could happen when you
moved to a new version of SAP.
You have modified an IDoc structure.
You must convert your modified IDocs when you upgrade to a new version
of the adapter or a new version of SAP.
You are migrating from version 3.0.3 to version 3.9 of the Adapter for SAP
R/3.
Installation Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Converting IDoc Formats
The format conversion tool that ships with Adapter for SAP R/3 is a valuable
resource for you to more easily migrate IDoc formats. Formats are dependent
on the field mapping that you have done so you must also migrate those
mappings. The purpose of the conversion tool is to preserve the field mappings
used for output formats and transfer those current field mapping to the newly
loaded format. The tool does this using two format export files as input to
produce a new format export file; the new format export file combines the
information from the two formats. This is intended to save you time because,
after you use the tool to transfer you old field mappings, you need map only the
new fields. Formats can be converted without doing rules at the same time, but
rules cannot be converted without also converting the associated formats.
To use the IDoc conversion tool, export your old IDoc output format and the
new unmapped output format loaded using the version 3.9 adapter. Then edit
the conversion tool configuration file to specify the names of the format export
files and run the tool. IDoc formats required by version 3.9 into the IDoc
conversion tool. The tool then creates one usable format based on the mapping
of the two formats.
After you have transferred the field mapping, you may validate the converted
format by reformatting previously used messages and confirming that the
output message fields contain the expected data. The New Era of Networks
utility programs msgtest.exe and ruletest.exe can be used to validate your
converted messages and rules.
The IDoc conversion tool for Adapter for SAP R/3 provides the tools to do the
following:
•
Migrate IDoc formats from a 4.x Formatter database (database used by
Adapter for SAP R/3 version 3.0.3) to a 5.4 Formatter database (database
used by Adapter for SAP R/3 version 3.8).
•
•
Update an extended IDoc format to a 5.6 Formatter database.
Update a currently used IDoc format in a 5.x Formatter database to a
newer version.
If you are currently using map objects with formats for either of the last
two scenarios, the conversion tool is not necessary because map objects
preserve the field mapping from the original format. Map objects are
available only with New Era of Networks formatters.
Note The following procedures must be applied individually to each IDoc
format that is being migrated. The conversion tool is able to handle only one
IDoc type at a time.
6
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Migrating to Adapter for SAP R/3 Version 3.9
❖
To migrate IDoc formats from a 4.x Formatter database
Output formats used by the Broker for IDocs sent into SAP changed between
version 3.03 and version 3.8 of the SAP adapter. The segment names used to
begin with E2 or Z2 and terminate with a three-digit version number. Segment
names now begin with E1 or Z1 to reflect that the IDoc is inbound into SAP.
Three-digit version numbers have been dropped.
Note New input formats can be used as loaded. No information from the old
input format needs to be migrated.
1
Do one or both of the following:
a
Export only the outbound format from the 4.x Formatter database
using the NNFie utility provided with Formatter 4.x.
Example:
C:\MQI\bin>nnfie -e absen1.oc.4x.exp -m
SAP.OC.ABSEN1 -s nnfie
b
Export the Rules associated with the format using the NNRie utility.,
if you are converting rules.
Example:
C:\MQI\bin.nnrie -e absen1.4x.rules.exp -m
SAP.OC.ABSEN1 -s nnfie
Note When exporting extended IDoc formats from an 4.x Formatter
database, the format name must be in quotation marks because names
contain special characters. For example:
nnfie -e format.exp -m “SAP.OC.MATMAS03^1” -s import
2
3
Load the outbound format for the same IDoc into a temporary 5.6 database
using version 3.9 of Adapter for SAP R/3.
Export only the outbound format of the IDoc loaded in the previous step
using the NNFie utility provided with Formatter 5.x.
Example:
C:\sybase\bin>nnfie -e absen1.oc.5x.exp -m
SAP.OC.ABSEN1 -s nnfie
4
Edit the configuration file for the conversion tool to indicate:
Installation Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Converting IDoc Formats
•
•
The names of the two format export files created in step 1 and step 3
of this procedure.
The name that you want to use for the converted format. (This name
is arbitrary).
5
To run the conversion tool, type the command using the following as an
example:
sap39idoccnvtool -file=<name of configuration file>
The format export files and the configuration file used to load the 3.9
schema should be placed in the SAP-3_9/bin folder. The command must
be run from this same folder.
6
7
Inspect the log file produced by the conversion utility for errors.
Do one of the following:
a
Import the format created by the conversion utility into the target
database using the NNFie utility provided with Formatter 5.x.
Example:
C:\ConversionTests\>nnfie -i absen1.oc.conv.exp
-g -s nnfie
b
Import the Rules file created by the conversion utility using the
NNRie utility provided with Formatter 5.x. This step is required only
if step 1b was used.
8
9
Review the formats to be sure the converted format has the correct
mapping.
If any formats have not been converted, you must change them manually.
Test the format by using it as the target format for reformatting a test
message.
❖
To update a newly extended IDoc format in a 5.x Formatter database:
1
Export only the original outbound format using the NNFie utility provided
with Formatter 5.x.
Example:
C:\sybase\bin>nnfie -e absen1.oc.5x.exp -m
SAP.OC.ABSEN1 -s nnfie
8
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Migrating to Adapter for SAP R/3 Version 3.9
2
3
Load the outbound format for the newly extended IDoc into a temporary
5.6 database using the 3.9 SAP adapter. (The example assumes an
extended IDoc named ZABSEN1 was made from the base IDoc
ABSEN1.)
Export only the outbound format of the IDoc loaded in the previous step
using the NNFie utility provided with Formatter 5.x.
Example:
C:\sybase\bin>nnfie -e zabsen1.oc.5x.exp -m
SAP.OC.ZABSEN1 -s nnfie
4
5
Edit the configuration file for the conversion tool to indicate:
•
The names of the two format export files created in step 1 and step 3
of this procedure.
•
The name that you want to use for the converted format. (This name
is arbitrary.)
To run the conversion tool, type the command using the following as an
example:
sap39idoccnvtool -file=<name of config file>
The format export files and the configuration file used to load the 3.9
schema should be placed in the SAP-3_9/bin folder. The command must
be run from this same folder.
6
7
Inspect the log file produced by the conversion utility for errors.
Import the format created by the conversion utility into the target database
using the NNFie utility provided with Formatter 5.x.
Example:
C:\ConversionTests\>nnfie -i zabsen1.oc.conv.exp -g
-s nnfie
8
Test the format by using it as the target format for reformatting a test
message.
Note The way extended IDocs are treated is the major consideration for the
conversion process between Adapter for SAP R/3 versions 3.8 and 3.9.
Extended IDocs are no longer considered special situations.
Installation Guide
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Converting IDoc Formats
❖
To update a currently used IDoc format in a 5.x Formatter database:
1
Export only the original outbound format using the NNFie utility provided
with Formatter 5.x.
Example:
C:\sybase\bin>nnfie -e absen1.oc.5x.exp -m
SAP.OC.ABSEN1 -s nnfie
2
3
Load the outbound format for the new version of the IDoc into a temporary
5.6 database using the 3.9 SAP adapter (the example assumes a new
version of ABSEN was released - ABSEN2).
Export only the outbound format of the IDoc loaded in the previous step
using the NNFie utility provided Formatter 5.x.
Example:
C:\sybase\bin>nnfie -e absen2.oc.5x.exp -m
SAP.OC.ABSEN2 -s nnfie
4
5
Edit the configuration file for the conversion tool to indicate:
•
The names of the two format export files created in step 1 and step 3
of this procedure.
•
The name that you want to use for the converted format. (This name
is arbitrary.)
To run the conversion tool, type the command using the following:
Example:
sap39idoccnvtool -file=<name of config file>
The format export files and the configuration file used to load the 3.9
schema should be placed in the SAP-3_9/bin folder. The command must
be run from this same folder.
6
7
Inspect the log file produced by the conversion utility for errors.
Import the format created by the conversion utility into the target database
using the NNFie utility provided with Formatter 5.x.
Example:
C:\ConversionTests\>nnfie -i absen2.oc.conv.exp -g -
s nnfie
8
Test the format by using it as the target format for reformatting a test
message.
10
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Migrating to Adapter for SAP R/3 Version 3.9
Example Log File
Source Control Record: SAP.OF.ABSEN1.CR
Destination Control Record: SAP.OF.ABSEN1.CR
Source Segment Name: SAP.OF.E2ABSE1
Destination Segment Name: SAP.OF.E2ABSE1
Field: SAP.E2ABSE1.BDEGROutMap: InMap: LEG.F1
Field: SAP.E2ABSE1.MOABWOutMap: InMap: LEG.F2
Field: SAP.E2ABSE1.ZEITYOutMap: InMap: LEG.F3
Field: SAP.E2ABSE1.AGRUNOutMap: InMap: LEG.F4
Field: SAP.E2ABSE1.BEGDAOutMap: InMap: LEG.F5
Field: SAP.E2ABSE1.ENDDAOutMap: InMap: LEG.F6
Field: SAP.E2ABSE1.ATEXTOutMap: InMap: LEG.F7
Adjusting for Customization
Make sure that the new format contains the correct default values for control
records. (Default values in control records are optional.) The conversion tool
transfers user-defined values and mappings, but it does not transfer default
values.
Note If the original format specified default values for the partner profile fields
of the control record, then you must manually set the values to those literals.
This applies to the literals named SAP.<IDOC TYPE>.* where * is one of the
following: RCVPOR, RCVPRN, RCVPRT, SNDPOR, SNDPRN, SNDPRT.
Suggestions for Converting IDocs
•
Use descriptive names for the format export files.
•
NNFie for 4.x uses the sqlsvses.cfg file, NNFie for 5.x uses the NNFie.cfg
in the local directory (if one was created) or it searches for a copy of
nnsyreg.dat file. The example commands assume the session name is
nnfie.
•
Use the which command to be sure that the expected version of nnfie.exe
is being referenced.
Installation Guide
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Converting IDoc Formats
•
•
The conversion tool can only convert one format at a time, so each export
file must contain only one top-level format. (For example,
SAP.OC.DEBMAS04)
The easiest way to provide the information necessary for a user to log into
the SAP system is to use a functioning configuration file for the inbound
IDoc process. The value of SAPInConfig key should be the name of this
file. (For example, the Schema mode configuration file used to load the
IDoc with Version 3.9. It should be in the SAP-3_9/bin folder.)
•
•
The saprfc.ini file is required. The file is in the location pointed to by the
RFC_INI environment variable.
The log file created by running the conversion tool reports errors and
conversion information. The conversion information is a summary of error
messages and a list of items that have been converted. It should indicate
that some field mappings were preserved; for example, see the log file at
the end of this section (sample log for a run of the conversion tool that
preserves mappings).
•
The import of the format generated by the conversion tool should use the
-g option to ignore the conflicts that are reported when the same
components are loaded in multiple converted format files. For example,
the Input/Output Control “SAP.Length.3” or the control for some other
length value may exist in multiple format definitions. The definitions are
identical, so there is no need to reload the component. The NNFie.log
reports instances that were ignored.
Example Conversion Tool Configuration File
#--------------------------------------------------
# File Name: ConvTool.cfg
# Sample configuration file for running the IDoc
# format conversion tool.
# The format of this file is important. Session names
# MUST begin at the beginning of the line, the
# associated keys MUST be below the session name
# and indented by spaces or tabs. Comments are
# preceded by #.
#--------------------------------------------------
NNConv
# name of original format as seen in formatter
12
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Migrating to Adapter for SAP R/3 Version 3.9
# database
FromFormat = SAP.OC.MATMAS03^1
# name of format (loaded using new version of SAP
# adapter) as seen in 5x formatter
ToFormat = SAP.OC.MATMAS03.ZMATMAS_EXTENSION
# must provide connection parameters used by 3.9 SAP
# adapter to connect to SAP use inbound idoc or Schema
# mode configuration file to get needed params to
# connect to SAP
SAPInConfig = in.cfg
# 1=411 0=5x (they could go 5x to 5x)
SourceFrom411 = 1
# release of user’s SAP system
SourceSAPRelease = 4.6B
# name of export file of format to convert (ONLY one
# format!)
SourceExtract = matmas_ext.4x.mapped.exp
# name of export file of format freshly loaded in 5.x
# via GUI (ONLY one format!)
RawExtract = matmas_ext.39.raw.exp
# desired name of converted format export file
OutputExtract = matmas_ext.39.conv.exp
# conversion log file
LogFile = format_conversion.log
#####################################################
# the following keys are for Rules related components
#####################################################
# name of rule export file (from 411) [Optional]
# RulesIn = matmas_ext.rules.4x.exp
# desired name of converted rule export file (into 5x)
# [Optional]
# RulesOut = matmas_ext.rules.conv
# User may specify a new name for Message Type within the
# Application Group in 5x database (the name is no
# longer limited to 32 characters in length, but may be
# up to 128 characters in length).
# After the input format is imported into the 5x
# database, the user would need to manually rename the
# format to match the new expanded name created using
# this key.
Installation Guide
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Converting BAPI Formats
# example:
# name in 4x database: LEG.I.ORIGINAL_LIMITED_SIZE_NAME
# renamed in 5x database to
# LEG.I.MODIFIED_FORMAT_NAME_OF_LARGER_SIZE
# ToRuleInputMessage=SAP.IC.MATMAS03.ZMATMAS_EXTENSION
# defaults to same name [Optional] or change rule name
# RuleNameOut =
# eof
Converting BAPI Formats
You must convert the formats for both IDocs and BAPIs when you move
between versions of Adapter for SAP R/3. Custom formats can continue to use
names that begin with user-defined prefixes to differentiate them from standard
formats.
BAPI formats and rules that you used for version 3.8 of the adapter will work
with Adapter for SAP R/3 version 3.9. BAPI formats from version 3.0.3 or
earlier are not supported and should be reloaded using the version 3.9 adapter.
New rules must be created for these formats.
The term New Formatter Database references any database created using
MQSI version 2.0.2, WMQI version 2.1, or e-Biz Integrator versions 3.2x or
3.6x.
The term Old Formatter Database references a database built on earlier
versions of these products.
❖
To use BAPI formats used in pre-3.9 versions
•
Reload all BAPIs into the New Formatter Database.
Note New Rules must be created for all formats that are reloaded into a
new database.
14
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Migrating to Adapter for SAP R/3 Version 3.9
Upgrading Rules
Review the rules that you are currently using with Adapter for SAP R/3. If they
need to be converted for use with version 3.9:
•
•
For converting IDoc rules, see “Converting IDoc Formats” on page 5.
For converting BAPI rules used with 3.0.3 formats, manually convert your
rules.
Installation Guide
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading Rules
16
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
2
Installing Adapter for SAP R/3
Topic
Page
Preparation
17
23
23
24
24
26
32
Disk Space and Memory Requirements
Required Software
Running Executables Before Installing the Adapter on Windows
Preparing the Installation Environment
Installing Adapter for SAP R/3
Understanding Environment Variables
Note Review the printed Release Bulletin included with this package for
last-minute updates to this Installation Guide.
Preparation
This section describes the areas you must consider before you run the
installation procedure.
•
•
•
•
•
•
Integration Server Support
Transport Support
Platform and Compiler Support
Disk Space and Memory Requirements
Required Software
Installation Environment
Installation Guide
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Integration Server Support
Adapter for SAP R/3, version 3.9, supports the following integration servers:
•
•
•
e-Biz Integrator, version 3.6
MQSeries Integrator, version 2.0.2
WebSphere MQ Integrator, version 2.1
Note MQSeries Integrator version 2.0.2 does not support multi-byte data.
Settings for Integration Servers
The following combinations of integration server, OT driver, schema loader,
and serializer can be used with Adapter for SAP R/3, version 3.9.
Table 2-1: Settings for Integration Servers
Schema
Integration Server Open Transport Driver Loader
Serializer
MQSI 2.0.2
MQSeries
NNT56 Schema
Loader
NCF Serializer
XML Serializer
NCF Serializer
XML Serializer
WMQI 2.1
e-Biz Integrator 3.6
EMQ
NNT56 Schema
Loader
MQSeries
MSMQ
Flat File
Transport Support
Adapter for SAP R/3, version 3.9, uses Open Transport (OT). Open Transport
supports the following transport drivers:
18
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Installing Adapter for SAP R/3
Table 2-2: Server transport support
Driver
Flat File
MQSeries
MSMQ
Tibco
Version
2.6
Supported Platforms
NT, Solaris, HP-UX, AIX
NT, Solaris, HP-UX, AIX
NT
2.6
2.6
2.6.1
2.6.1
NT
JMS
NT, Solaris
Supported Platforms and Compilers
“Supported Platforms and Compilers” on page 19 identifies the operating
systems and compilers required for this product. Use this table to identify the
software required for installation.
Installation Guide
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Table 2-3: Server
Operating System
DBMS
Compiler
Windows NT 4.0 (Service
Pack 6a or higher)
Sybase ASE 12
Sybase ASE 12.5
Microsoft SQL Server 2000
Microsoft SQL Server 7
Oracle 8i r3 (8.1.7)
Oracle 9i
Microsoft Visual
C++, version 6.0
Windows 2000 (Service
Pack 2 or higher)
DB2 UDB 7.1
DB2 UDB 7.2
Sybase ASE 12
Sybase ASE 12.5
Oracle 8i r3 (8.1.7)
Oracle 9i
Solaris 8
SparcWorks
C++, version 6.0,
update 1
DB2 UDB 7.1
DB2 UDB 7.2
Sybase ASE 12
Sybase ASE 12.5
Oracle 8i r3 (8.1.7)
Oracle 9i
HP-UX 11.00
HPaC++,version
A.03.15
DB2 UDB 7.1
DB2 UDB 7.2
Sybase ASE 12
Sybase ASE 12.5
Oracle 8i r3 (8.1.7)
Oracle 9i
AIX 4.3.3
VisualAge C++,
Professional
version 5.0.2
DB2 UDB 7.1
DB2 UDB 7.2
Installation Environment
Previous Releases
If you have a previous version of New Era of Networks Adapter for SAP R/3
installed, it is suggested that you uninstall that version before installing the
current release. However, if you plan to continue to use your older version of
20
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Installing Adapter for SAP R/3
the software, it can remain on the same server. Installation of the current release
does not overwrite the previous installation and does not affect any files you
might have added.
CIM Repository
The CIM (common information model) repository shares installation
information across Sybase and New Era of Networks products, tracking
version and path information for each product installation. If the repository is
already installed, you do not need to install a new CIM Repository. However,
the repository must be running before you can install products.
If a CIM repository does exist:
•
•
on the local machine on which you are installing, and the repository is
running, the installer uses that repository by default. The Repository
Information window does not appear.
on the local machine on which you are installing and the repository is not
running, the installer tries to start the existing repository. If it cannot start
the repository, a warning message appears stating that a repository was
found but could not be started. The Repository window will appear for you
to provide the repository information and start the repository.
•
on a remote machine, the Repository Information window appears even if
the repository is running on the remote machine. If you want to use an
existing repository, start it manually and provide the information required
by the installer for the existing repository.
If a CIM repository does not exist or cannot be found by the installer, a window
appears, prompting you to install a new CIM Repository or use an existing
repository.
Installation Guide
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
❖
To start a repository
If the repository is already installed, you must provide the server, port number,
and user information for the existing repository. The system populates the
screen with default values for the server, port number, and user information,
but you can modify the values if necessary.
•
Use platform specific commands to start the repository:
a
On Windows, enter the following:
cd <install dir>\CIMRepository-3_0_0\bin
repository.bat
b
On UNIX, enter the following:
cd <install dir>/CIMRepository-3_0_0/bin
./repository.sh
Temporary Installation Directory
The installer uses a temporary location during the installation process. The
default temporary location on Windows is defined in the system environment
variables and is usually set to C:\temp. The default temporary location on
UNIX is /var/tmp.
If enough space is not available in the default temporary location, the installer
might not start, or it might start, but notify you that sufficient space is not
available. Either case requires providing sufficient space in the temporary
directory. You can do one of the following:
•
•
Move or delete files to provide space on the default temporary directory.
Launch the installer using a different temporary directory.
❖
To install on a temporary directory other than the default directory:
Use platform specific commands to specify an install directory:
•
a
On Windows, enter the following:
setup -is:tempdir <full path to alternate temp
directory>
b
On UNIX, enter the following:
setup -is:tempdir <full path to alternate temp
directory>
22
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Installing Adapter for SAP R/3
Note Do not use spaces or special characters in your UNIX path.
Disk Space and Memory Requirements
Disk space
NT: 183 MB for adapter and temporary directory used during installation
UNIX: 208 MB for adapter and 160 MB for temporary directory
256 MB for product files
Memory
Required Software
“Supported Platforms and Compilers” on page 19 identifies the operating
systems and compilers required for this product. Use this table to identify the
software required for installation.
The following must be installed or configured on the server before installing
the adapter:
•
•
Windows operating system
SAP R/3, version 3.1H or higher; 4.0B or higher to work with XML
formats.
•
•
•
DBMS server database application.
Compiler if you plan to write any of your own code.
One of the integration servers listed in “Integration Server Support” on
page 18.
•
Internet Explorer version 5.5, Service Pack 2.
Installation Guide
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Running Executables Before Installing the Adapter on Windows
Running Executables Before Installing the Adapter on
Windows
You must run the following executables or .msi files from the Adapter for SAP
R/3 Server CD before you install the Adapter for SAP R/3 on Windows.
•
•
•
•
From your CD-ROM drive, open the vbruntime-6_0 folder and double-
click on vbrun60sp4.exe to install Visual Basic runtime. This is used by
the GUI. When the install is finished, click OK.
From your CD-ROM drive, open the mmc-1_2 folder and double-click on
immc2.exe to install the Microsoft Management Console, which is used by
the GUI. When the install is finished, click OK.
From your CD-ROM drive, open the mdac-2_6 folder and double-click on
the mdac_typ.exe file to install the proper version of MDAC. When the
install is finished, click OK.
For Windows NT, from your CD-ROM driver, open the msvc-6_0 folder
and double-click on the vcredist.exe file to install the proper version of
MSVC runtime. When the install is finished, click OK.
After you have completed installing these four applications, you can continue
with the next steps to complete the install.
Note If you are installing Adapter for SAP R/3 on the same machine as your
database server, you may not have to install a separate database client; instead,
you can connect directly to the database server.
Preparing the Installation Environment
Previous versions
If you have a previous version of Adapter for SAP R/3 installed, it is suggested
that you uninstall that version before installing the current version. However,
if you plan to continue to use your older version of the software, it can remain
on the same server. Installation of the current version does not overwrite the
previous installation and does not affect any files you may have added.
24
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Installing Adapter for SAP R/3
CIMRepository
The Common Information Model (CIM) Repository shares installation
information across Sybase and New Era of Networks products, tracking
version and path information for each product installation. If the repository is
already installed, it is not necessary to install a new CIM Repository. However,
the repository must be running before you can install products. After the
installation has been completed, you can stop the CIM Repository to save
resources.
If a CIM Repository does exist:
•
on the local machine and is running, the installer uses that repository by
default. The Repository Information window does not appear.
•
on the local machine and is not running, the installer tries to start the
existing repository. If it cannot start the repository, a warning message
appears stating that a repository was found but could not be started. The
Repository Information window appears and you can provide the
•
on a remote machine, the Repository Information window appears even if
the repository on the remote machine is running. To use an existing
repository, start it manually and provide the information required by the
installer for the existing repository as detailed in “To start a repository” on
page 25.
If a CIM Repository does not exist or cannot be found by the installer, a
window displays with the prompt to either install a new CIM Repository or use
an existing repository.
❖
To start a repository
If the repository is already installed, you must provide the server, port number,
and user information for the existing repository. The system populates the
screen with default values for the server, port number, and user information but
you can modify the values if necessary.
1
To start the repository on Windows, enter the following:
cd <install dir>\CIMRepository-3_0_0\bin
repository.bat
2
To start the repository on UNIX, enter the following:
cd <install dir>/CIMRepository-3_0_0/bin
./repository.sh
Installation Guide
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Adapter for SAP R/3
Temporary Installation Directory
The installer uses a temporary location during the installation process. The
default temporary location on Windows is defined in the system environment
variables and is usually set to C:\temp. The default temporary location on
UNIX is /var/tmp.
If enough space is not available in the default temporary location, the installer
may not start or may start but notify you that sufficient space is not available.
You can do one of the following:
•
•
Move or delete files to provide space.
Launch the installer using a temporary directory on a different drive
(Windows) or location (UNIX).
❖
To install on a temporary directory other than the default directory:
1
For Windows, enter the following:
setup -is:tempdir <full path to alternate temp directory>
For Unix, enter the following:
2
./setup -is:tempdir <full path to alternate temp directory>
Note Do not use spaces or special characters in your UNIX path.
Installing Adapter for SAP R/3
For all installation instructions, <install dir> refers to the default installation
directory.
•
•
If installing on Windows, the default is C:\Sybase.
If installing on Unix, the default is /user/u/Sybase. When installing on
Unix, do not use spaces or special characters in the path.
26
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
If the installation directory does not exist, you can either create the directory or
the installer will create the installation directory when installation begins. If
you get a memory error while installing, see “Temporary Installation
Directory” on page 26.
Note Before you begin the installation, the repository must be running unless
you plan to install a new one. If you plan to use an existing repository, you can
verify whether the repository is running by doing one of the following:
On Windows, go to Task Manager > Processes. If dbsrv7.exe is listed as
running, the repository is active.
On Unix, type ps -ef | grep dbsrv7
❖
To install Adapter for SAP R/3 using the InstallShield Wizard:
These installation instructions assume you are logged onto the server with
administrative rights/user permissions. When installing on UNIX, it is best to
perform the install directly on the target machine in the Common Desktop
Environment (CDE) single window mode. Use the CD-ROM to install Adapter
for SAP R/3.
1
2
Insert the CD-ROM and go to the step for your operating system:
Start the installer.
a
On Windows NT and 2000
1
2
3
Verify that you have installed all prerequisite software.
Select Start>Run from the Windows Start menu.
In the Run dialog box, browse to locate the setup file:
<CD-ROM drive>:\setup.exe
4
Click OK.
The Installer Welcome window appears.
Got to step 3 of the main procedure.
5
b
On Solaris:
1
Mount the CD-ROM.
For example:
pfs_mount <CD DEVICE> /mnt_point
Set the IP address:
2
Installation Guide
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Adapter for SAP R/3
export DISPLAY=<IP address:0.0>
To change to the /mnt_point directory, enter:
%cd mnt_point
3
4
To start the installer, enter:
%./setup
The Installer Welcome window appears.
Got to step 3 of the main procedure.
5
c
On AIX:
1
Mount the CD-ROM.
For example:
pfs_mount <CD DEVICE> /mnt_point
Set the IP address:
2
3
4
export DISPLAY=<IP address:0.0>
To change to the /mnt_point directory, enter:
%cd mnt_point
To start the installer, enter:
%./setup
The Installer Welcome window appears.
Got to step 3 of the main procedure.
5
d
On HP-UX:
1
Mount the CD-ROM.
Some of the files that are being installed might have names
longer than 31 characters or have mixed-case file and directory
names, so you must enter the following mount commands:
nohup pfs_mountd &
nohup pfsd &
pfs_mount <cd device> /mnt_point
2
3
Set the IP address:
export DISPLAY=<IP address:0.0>
To change to the /mnt_point directory, enter:
28
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Installing Adapter for SAP R/3
%cd mnt_point
4
5
To start the installer, enter:
%./setup
The Installer Welcome window appears.
Got to step 3 of the main procedure.
3
4
To initiate the installation process, click Next on the Installer Welcome
window.
The Installer window appears.
To specify an installation directory, choose one of the following:
a
To accept the default directory, click Next.
b
To use a different directory, click Browse, select the directory, and
click Next.
Note For optimum performance, install all Sybase and New Era of
Network products into the same directory.
5
To configure the repository, do one of the following:
a
If your repository is running, the Select Products To Install window
appears. Go to step 7.
b
If you do not have a repository installed or it is installed on a remote
machine, the Repository Information window appears. Go to step 6.
Note
You can verify whether the repository is running by doing one of the
following:
On Windows, go to Task Manager > Processes. If dbsrv7.exe is listed
as running, the repository is active.
On Unix, type ps -ef | grep dbsrv7
6
In the Repository Information window, do one of the following:
•
•
To install a new repository, go to step 6a.
To use an existing repository, go to step 6b.
Installation Guide
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Adapter for SAP R/3
Figure 2-1: Repository Information
a
To install a new repository, based on requirements detailed in
“CIMRepository” on page 25:
1
2
3
Choose Install a new repository.
The Repository Connection Information is not visible in the
Repository Information window.
Click Next.
The Repository Installation window displays the repository
components to be installed.
Click Next.
The Repository Installation window displays the progress of the
installation. Installation of a new repository may take a few
minutes.
When the repository installation is complete, the Select Products
To Install window appears.
b
If the CIM Repository is already installed and the Repository
Information window appears:
1
Choose Use an existing repository.
30
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Installing Adapter for SAP R/3
2
3
Accept the defaults for Repository Connection Information if
possible. The defaults are shown in Figure 2-1 on page 30.
Note If you use an existing repository, the repository must be
running to continue the installation.
Click Next.
The Select Products to Install widow appears.
7
From the Select Products to Install window, accept the default settings and
click Next.
The Installation Summary window appears displaying the products that
will be installed and the approximate disk space that they will take.
8
9
Click OK.
The Installation Summary window displays the progress of the
installation.
Click Finish when the following message appears:
The InstallShield Wizard has successfully installed
New Era of Networks Adapter for SAP 3.9.
Note If you get a NULL error message at the end of the installation, ignore
the message.
If you are installing on Solaris 7, you might receive error messages when
finishing the installation. The product installed correctly; you can ignore
the errors.
10 For Windows, reboot the machine.
Adapter for SAP R/3 and the Sybase shared components are located in the user
specified installation directory <install dir>. The Adapter for SAP R/3
software is located in <install dir>\SAP-3_9.
Installation Guide
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding Environment Variables
Table 2-4: /<install dir>/SAP-3_9
Subdirectory
Description
/bin
contains wrapper scripts for executables
and shared libraries
/CFG
contains sample configuration files
contains ctg message and error files
contains data files
/NNSYCatalogues
/share
Understanding Environment Variables
Required environment variables are set by wrapper scripts at runtime. The GUI
executable installation defines system environment variables of
SAP39_ROOT and CGC39_ROOT with a value of <install dir> and the
variable RFC_INI with a value of <install dir>\CFG\saprfc.ini. Complete
configuration information is supplied in Adapter for SAP R/3 User’s Guide and
should be used after verifying the installation and before using Adapter for
SAP R/3.
32
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
3
Uninstalling Adapter for SAP R/3
on uninstalling a version earlier than 3.8.
Topic
Page
33
Starting the Repository
Uninstalling Adapter for SAP R/3 3.9
Uninstalling Shared Components
34
34
Starting the Repository
The CIM repository that shares Sybase and New Era of Networks product
information must be running to uninstall products. This ensures the
repository is updated with the accurate list of installed products. Using
other means to uninstall products does not update the respository, which
becomes an issue during reinstallation.
To start the repository on Windows, enter the following:
cd <install dir>\CIMRepository-3_0_0\bin
repository.bat
To start the repository on UNIX, enter the following:
cd <install dir>/CIMRepository-3_0_0/bin
./repository.sh
Installation Guide
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Uninstalling Adapter for SAP R/3 3.9
Uninstalling Adapter for SAP R/3 3.9
A separate uninstaller is provided to remove Adapter for SAP R/3 version 3.9.
The scripts to start the uninstaller are located in <install dir>\SAP-3_9.
•
•
For Windows, uninstall.bat
For Unix, uninstall.sh
❖
To uninstall Adapter for SAP R/3 version 3.9:
1
Move any custom or other files that you want to save from the SAP-3_9
directory to another directory.
2
At the command prompt, enter the following:
a
For Windows:
cd <install dir>\SAP-3_9
uninstall.bat
b
For Unix:
cd <install dir>/SAP-3_9
uninstall.sh
The InstallShieldWizard starts to uninstall Adapter for SAP R/3
version 3.9.
3
4
Follow the wizard until uninstall is complete.
Manually remove the remaining <install dir>\SAP-3_9 directory.
Uninstalling Shared Components
You must first uninstall Adapter for SAP R/3 version 3.9 and any other New
Era of Networks or Sybase products that use these shared components. You
will receive a message when you attempt to uninstall any component that is
required by another product. Shared components must be uninstalled in the
order they are listed in step 4.
❖
To uninstall shared components:
1
Copy <install dir>\JRE_1_3 directory to a temporary location and change
the PATH environment variable to include the temporary directory.
34
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3 Uninstalling Adapter for SAP R/3
This provides a correct version of the JRE for running the uninstallers.
Note
If you do not copy JRE_1_3 to a temporary location, you will not be able
to uninstall all of the shared components.
2
To verify that Java version 1.3.1 or higher is being used, enter the
following:
java -version
3
4
Enter the following command:
cd <install dir>\uninstallers
Repeat the steps 5 through 9 for each shared product in the following
order:
•
•
•
•
•
•
•
•
AgentManager-3_0_0
ConfigUtils
jConnect
ThirdParty
JRE_1_3
ASAAgent
CIMRepository-3_0_0
EPASA-7_0_3
5
Run the following command. Note that the command is written for
Windows. For Unix, substitute a forward slash for the backward slash:
java -jar <Shared Product>\<Shared Product File>.jar
For example:
java -jar AgentManager-3_0_0\AgentManager-
3_0_0.jar
The InstallShieldWizard starts to uninstall the shared component.
To begin the installation, click Next on the initial Uninstaller window.
The Repository Information window appears.
6
7
Accept the defaults for the Repository Connection Information and click
Next.
Installation Guide
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Uninstalling Shared Components
8
9
On the Feature Select window, select all items to be removed and click
Next.
When the selected components are uninstalled, click Finish.
10 After repeating steps 5 through 9 for all of the shared products, delete the
copy of JRE_1_3 that you had moved to a temporary directory.
11 Manually remove the remaining <install dir> directory.
36
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
B
book organization
C
changes to configuration keys
compilers
converting format
integration servers
5
e-Biz Integrator 18
MQSeries 18
SparcWorks C++ 20
VisualAge C++ 20
configuration key changes
conventions vii
conversion tool configuration file 12
3
L
converting IDoc formats
D
database
existing
target
2
MQSeries Integrator 18
MSMQ 18
2
databases
DB2 UDB 20
Microsoft SQL Server 20
Sybase ASE 20
default directory 26
documentation set
NCF Serializer 18
E
e-BIz Integrator 18
EMQ 18
operating systems
AIX 20
HP-UX 20
Solaris 20
Windows NT 20
F
Flat File 18
Installation Guide
37
Download from Www.Somanuals.com. All Manuals Search And Download.
R
S
SAP
installing 27
uninstalling 34, 35
T
temporary directory 26
transport
supported 18
U
uninstall
shared components 35
upgrading
1
BAPI formats 14
from 3.0.3
from 3.8
2
rules 15
W
WebSphere MQ Integrator 18
X
XML Serializer 18
38
Adapter for SAP R/3
Download from Www.Somanuals.com. All Manuals Search And Download.
|