Upgrade Guide
PATRIOTcompliance Solution
Version 2.2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
About This Book............................................................................................................................ v
CHAPTER 1
CHAPTER 2
Introduction ..................................................................................... 1
Overview .......................................................................................... 4
Verifying the Account Management portlet deployment.......... 24
Creating the Account Management portlet for pacuser........... 26
Verifying deployment of the new and updated portlets ........... 26
Setting up the new portlets for pacuser................................... 27
Creating portlet pages for pacuser.......................................... 28
Index ............................................................................................................................................. 29
Upgrade Guide
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
iv
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Book
This book describes how to upgrade and configure products in the
PATRIOTcompliance Solution.
Audience
Sybase Professional Services is the principal audience for this book.
This book contains the following chapters:
How to use this book
•
Chapter 1, “Introduction,” briefly describes the PATRIOTcompliance
Starter Kit and its components.
•
Chapter 2, “Upgrading to version 2.2,” provides detailed upgrade
instructions.
Related documents
New Era of Networks Process Server 3.9.1 Installation Guide
New Era of Networks Process Server 3.9.1 Release Bulletin
TightLink Solution Server UpgradeNotes.htm
Sybase certifications on
the Web
Technical documentation at the Sybase Web site is updated frequently.
❖
Finding the latest information on product certifications
1
Point your Web browser to Technical Documents at
2
3
4
Select Products from the navigation bar on the left.
Select a product name from the product list and click Go.
Select the Certification Report filter, specify a time frame, and click
Go.
5
Click a Certification Report title to display the report.
❖
Creating a personalized view of the Sybase Web site (including support
pages)
Set up a MySybase profile. MySybase is a free service that allows you to
create a personalized view of Sybase Web pages.
1
Point your Web browser to Technical Documents at
Upgrade Guide
v
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Click MySybase and create a MySybase profile.
Sybase EBFs and
software
maintenance
❖
Finding the latest information on EBFs and software maintenance
1
Point your Web browser to the Sybase Support Page at
2
Select EBFs/Maintenance. Enter user name and password information, if
prompted (for existing Web accounts) or create a new account (a free
service).
3
4
5
Select a product.
Specify a time frame and click Go.
Click the Info icon to display the EBF/Maintenance report, or click the
product description to download the software.
Conventions
The following style conventions are used in this manual:
•
•
The names of files and directories are shown in this font.
Command names, command option names, utility names, and other
keywords are shown in this font.
•
•
Variables, or words that stand for values that you fill in, are shown in this
font.
Database objects are shown in this font.
If you need help
Each Sybase installation that has purchased a support contract has one or more
designated people who are authorized to contact Sybase Technical Support. If
you cannot resolve a problem using the manuals or online help, please have the
designated person contact Sybase Technical Support or the Sybase subsidiary
in your area.
vi
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
PATRIOTcompliance Solution overview
PATRIOTcompliance Solution overview
The Sybase PATRIOTcompliance Solution allows financial institutions to
automate name filtering, intra-day and historical transaction filtering, and
enterprise wide customer activity monitoring to meet the requirements of the
USA PATRIOT (Uniting and Strengthening America by Providing Appropriate
Tools Required to Intercept and Obstruct Terrorism) legislation.
The PATRIOTcompliance Starter Kit provides the infrastructure components
needed for the Sybase PATRIOTcompliance Solution, including:
•
•
•
•
New Era of Networks Business Process Integration (BPI) Suite
New Era of Networks Adapter for Flat Files
Sybase Enterprise Portal
TightLink CIS
The PATRIOTcompliance Solution templates allow the installation and
configuration of the separate products into a single solution. These templates
include metadata to assemble the products, application server components, and
database stored procedures to perform complex, highly-specialized functions.
2
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
2
Upgrading to version 2.2
Heading
Page
4
Overview
Upgrading the PATRIOT database
Upgrading Process Server process definitions
Upgrading formats
7
8
11
12
13
20
Upgrading EAServer components
Configuring Portlets
Upgrade Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Overview
This upgrade to the PATRIOTcompliance Solution includes an updated
ROLLUP version of the PATRIOT Compliance Starter Kit. Sybase
recommends that you install this updated Software Release as soon as possible.
This upgrade is distributed as a zip file and is available for download from the
Warning! Sybase strongly recommends that a backup of all components be
done before you begin this upgrade. You must re-create any customization of
the PATRIOT solution templates.
Issues addressed in this release
CR#
Description
CR#332858
Previous versions of PATRIOT Starter Kit sometimes allowed
users to log in more than once with the same login name. Updates
to the portalinterface.properties allow you to restrict users to a
single login at a time.
This step is optional and not required for successful deployment.
CR# 332855
Changes to security.properties allow you to set the number of
days, months or years that a password remains valid; the default
is 0, which means passwords are valid indefinitely.
Duration parameters are expressed in the <number> of days,
months, or years the password remains valid. Count begins from
the day you create or modify the password. Changing the
password via the Account Management portlet before the
expiration date resets the count.
EP Security locks users who fail to change their passwords
within set duration parameters out of the system.
CR# 327011
Pat LoggedIn Users is a new portlet that identifies all users
currently logged into the system.
4
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Upgrading to version 2.2
CR#
Description
CR# 333653
PATRIOTcompliance Starter Kit 2.2 includes a script which
creates a mechanism for customers who want to make their EP
instance use non-sa database logins. These logins include
sufficient permissions to let EP applications(s) connect to the
patriot database, portal interface, and search cache
Adding a non-sa user connection involves running a script,
ep_login.sql, that creates three new login names
PATRIOTdbConnection, PortalInterfaceCache, and
epSearchCache. You then open Jaguar Manage in EAserver to
add the actual connections.
This step is optional and not required for successful deployment.
CR# 334386,
CR# 336723
Customers, employees, or external accounts may be placed on a
cleared list to allow their transactions to pass through the
PATRIOT Solution without being flagged as a hit. Use the Pat
Cleared List Adm portlet to administer the cleared list. In this
portlet, you can search entries, make entries, or flag entries as
inactive.
Changes to the Pat Cleared List Admin portlet now allow you to
clear customers, employees, or external accounts from multiple
lists at the same time. A new column in the search list identifies
users who make changes to the cleared list.
CR# 334776
Stop words are words that occur frequently in transactions and
are irrelevant to the suspect search. The Stop Words Candidate
portlet is a new portlet which identifies how frequently certain
words appear in various lists. Use this portlet to identify potential
candidates for the stop words list.
CR# 328827,
CR# 323431
Use the Pat Search List portlet to look up a suspect, employee,
customer, country, or address with the search engine. Pat Search
List returns a score that indicates the percent certainty for each
match.
Previous versions of the Pat Search List portlet limited suspect
searches to name. Customers can now search for suspects by
country and address. Country and address check boxes now
appear just above the Search for Suspect button. Country is the
default search criteria; to search by street address you must click
the Address button.
Upgrade Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Contents of the 2.2 release
Refer to the descriptions of the files below for individual installation
instructions. Directory paths below are in UNIX notation. For Windows,
change the forward slashes to back slashes.
Target directory
Filename
\..
patnfg22.pdf
pat_upgrade.pdf
pat_cop.pdf
patsag.pdf
EBF1208x_README.HTML
EBF1208x_Buglist.txt
EBF1208x_Filelist.txt
ep_login.sql
\database
\edl
PatriotDB2.2_Upgrade.sql
pPostFilter.edl
lPatriot.edl
\formats
custcomp.exp
stdcustrecformats.exp
stdcustrecformatscomp.exp
stdmoneytransformats.exp
stdmoneytransformatscomp.exp
Filter.properties
\jaguar
dispatcher.jar
\portlets
onelogin.zip
PatAcctManagementPortlet.pz
PatriotPortlets22.pz
clientNew.xml
\tightlink
clientupdate212.xml
Tightlink212Upgrade.doc
❖
Loading Release 2.2
You must have 2.1.2 installed or upgrade from 2.1.1 prior to adding the EBF.
Backup the current PATRIOT related directories to a safe place.
1
•
•
%PATRIOT%
%JAGUAR%\java\classes\com\sybase\patriotact\filter
6
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Upgrading to version 2.2
•
•
%JAGUAR%\html\classes\com\sybase\ep\portalinterface\tasks
%JAGUAR%\Repository\IDL\com\sybase\patriotact\filter
2
3
Extract the PATRIOT EBF files into a temporary location.
The target directory of unzipping the EBF archive will be the installation
directory of PATRIOT (%PATRIOT% for Windows; $PATRIOT for
Solaris)
Make sure you have ASE and EAServer up and running.
Verifying system environment variables
Follow these steps to verify or set the environment variables required for
configuration.
1
2
3
4
Verify that the SYBASE environment variable is set. The SYBASE
environment variable is the root directory of Sybase applications. For
example, SYBASE=/software/sybase (Solaris) or SYBASE=c:\Sybase
(Windows).
Verify that the SYBASE_ASE environment variable is set. This is the
directory under $SYBASE (Solaris) or %SYBASE% (Windows) where
Adaptive Server Enterprise has been installed. For example,
SYBASE_ASE=ASE-12_5.
Verify that the SYBASE_OCS environment variable is set. This is the
directory under $SYBASE (Solaris) or %SYBASE% (Windows) where
Open Client/Server has been installed. For example, SYBASE_OCS=OCS-
12_5.
Set the JAGUAR environment variable. This is the directory under
$SYBASE (Solaris) or %JAGUAR% (Windows 2000) where EAServer has
been installed.
Solaris example: JAGUAR=/software/sybase/EAServer
Windows 2000 example: JAGUAR=c:\Sybase\EAServer
5
Set the $JAVA_HOME (Solaris) or %JAVA_HOME% (Windows)
environment variable. This environment variable points to a directory
where a Java JDK is installed.
Solaris example: JAVA_HOME=$JAGUAR/jdk/jdk1.3
Upgrade Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading the PATRIOT database
Windows example: JAVA_HOME=$JAGUAR\shared\sun\jdk\jdk.3
6
Set the PATRIOT environment variable. This is the directory where you
initially copied the contents of the PATRIOTcompliance Starter Kit
Solution Template CD.
Solaris example: PATRIOT=$PATRIOT
Windows example: PATRIOT=%PATRIOT%
Upgrading the PATRIOT database
Release 2.2 includes scripts that allow you to upgrade the PATRIOT database
(Patriotdb) and New Era of Networks database (NNSYdb). There are separate
instructions for Solaris and Windows-based installations.
Solaris
Use these instructions to upgrade your database on Solaris.
1
Open a command window. Navigate to the
$PATRIOT/release2.2/database directory.
2
Execute the PatriotDB2.2_Upgrade.sql script, with the following syntax:
isql -S <ASE server name> -U <ASE_username> -P
<ASE_password> -i PatriotDB2.2_Upgrade.sql -o
3
Review and correct any errors in the output file.
Windows
Use these instruction to upgrade your database on Windows.
1
Open a command window. Navigate to the %PATRIOT%\database
directory.
2
Execute the PatriotDB2.2_Upgrade.sql script, with the following syntax:
isql -S <ASE server name> -U <ASE_username> -P
<ASE_password> -i PatriotDB2.2_Upgrade.sql -o
3
Review and correct any errors in the output file.
8
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Upgrading to version 2.2
Modifying PATRIOT connection caches
PATRIOTcompliance Starter Kit 2.2 includes a script which creates a
mechanism for customers who want to make their EP instance use non-sa
database logins. These logins include sufficient permissions to let EP
applications(s) connect to the patriot database, portal interface, and search
cache.
Adding a non-sa user connection involves running a script, ep_login.sql,
that creates three new login names PATRIOTdbConnection,
PortalInterfaceCache, and epSearchCache. You then open Jaguar Manager
in EAserver to add the actual connections.
This step resolves CR# 333653 is optional and not required for successful
deployment.
Executing the upgrade script
This section tells you how to execute the upgrade script. There are separate
instructions for Solaris and Windows-based installations.
Solaris
Use these instructions if you are upgrading a Solaris-based installation.
1
Open a command window, and navigate to the
$PATRIOT/release2.2/database directory.
2
Execute the ep_login.sql script, with the following syntax:
isql -S <ASE server name> -U sa -P <ASE_password> -
i ep_login.sql -o <outputfile>
3
Review and correct any errors in the output file.
Windows
Use these instructions if you are upgrading a Windows-based installation.
1
Open a command window, and navigate to the
%PATRIOT%\release2.2\database directory.
2
Execute the ep_login.sql script, with the following syntax:
isql -S <ASE server name> -U sa -P <ASE_password> -
i ep_login.sql -o <outputfile>
3
Review and correct any errors in the output file.
Adding the connection caches
The next series of steps adds the connection properties for the new login
names.
Upgrade Guide
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading the PATRIOT database
❖
Adding the PATRIOTdbConnection
1
2
3
Connect to Jaguar Manager as jagadmin.
Expand Jaguar Manager | Connection Caches.
Right-click PATRIOTdbConnection, choose Connection Cache
Properties.
When the Connection Cache Properties sheet appears, the General tab is
in focus.
4
5
6
7
In the User Name box, change the sa user name to patriotlogin.
In the Password box, type password.
Click Refresh, then click Ping to test the connection.
Click OK to return to Jaguar Manager.
❖
Adding the PortalInterfaceCache connection
1
Right-click PortalInterfaceCache, choose Connection Cache
Properties.
The Connection Cache Properties panel appears.
In the User Name box, change the sa user name to portaliflogin.
In the Password box, type password.
2
3
4
5
Click Refresh, then click Ping to test the connection.
Click OK to return to Jaguar Manager.
❖
Adding the epSearchCache connection
1
2
3
4
5
6
Right-click epSearchCache and select Connection Cache Properties.
In the User Name box, change the sa user name to epsearchlogin.
In the Password box, type password.
Click Refresh, then click Ping to test the connection.
Click OK to return to Jaguar Manager.
Shut down and restart Jaguar Server.
Known issue
Non-sa user connection caches to the PATRIOT database lack the appropriate
authority to retrieve data from ASE sybsecurity database. Granting system
security officer role (sso_role) to the user of patriot database connection
resolves this issue. You must run the following procedure for the Pat Audit
Trail portlet to work properly.
10
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Upgrading to version 2.2
Although there is a work around, this issue has been logged in QTS as CR#
361596 and will be addressed in a future release.
❖
Granting an sso_role to a patriot db connection user
1
Open a command window, and run the following statements:
isql -S <ASE server name> -U sa -P <ASE_password>
2
Run the following scripts:
use master
go
grant role sso_role to patriotlogin
go
3
Shut down and restart Jaguar Server.
Upgrading Process Server process definitions
This procedure overwrites all process definitions and plug-ins. There are
separate procedures for Windows and Solaris based installations.
Windows
Use these instructions if you are upgrading a Windows-based installation.
1
Copy the contents of the %PATRIOT%\Release2.2\edl directory to
%SYBASE%\ProcessServer-3_9\bin\edl. This overwrites the set of
existing files.
2
3
Open a command window, and change to the %SYBASE%\ProcessServer-
3_9\bin\edl directory.
Run the following commands:
call EDLUtil put ..\edl\lPatriot.edl
call EDLUtil put ..\edl\pPostFilter.edl
Solaris
Use these instructions if you are upgrading a Solaris-based installation.
1
2
3
Copy the contents of the $PATRIOT/Release2.2/edl directory to
$SYBASE/ProcessServer-3_9/bin/edl.
Open a command window, and change to the $SYBASE/ProcessServer-
3_9/edl directory.
Run the following commands:
Upgrade Guide
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading formats
EDLUtil put ..\edl\lPatriot.edl
EDLUtil put ..\edl\pPostFilter.edl
Upgrading formats
The standard money transaction and customer record formats have changed for
this release.
The following files have been updated.
•
•
•
•
•
custcomp.exp
stdcustrecformats.exp
stdcustrecformatscomp.exp
stdmoneytransformats.exp
stdmoneytransformatscomp.exp
Importing the new formats
You will need to import the new formats. Make sure you set NNSY_ROOT to
the %SYBASE%\nnsy (Windows) or $SYBASE/nnsy (Solaris) directory.
Windows
Use these instructions if you are importing the formats to a Windows-based
installation. Perform this step if you have not updated your formats.
1
2
Create the directory %SYBASE%\nnsy\formats if it does not already exist.
Copy the format files from the %PATRIOT%\Release2.2\formats\*
directory to the %SYBASE%\nnsy\formats directory.
3
4
Open a command window, and change to the %SYBASE%\nnsy directory.
Run the following commands:
NNFie -i formats\custscomp.exp -s new_format_demo -o
NNFie -i formats\stdcustrecformatscomp.exp -s
new_format_demo -o
NNFie -i formats\stdmoneytransformatscomp.exp -s
new_format_demo -o
12
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Upgrading to version 2.2
Solaris
Use these instructions if you are importing the formats to a Solaris-based
installation. Perform this step if you have not updated your formats
1
2
Create the directory $SYBASE/nnsy/formats if it does not already exist.
Copy the format files from the $PATRIOT/Release2.2/formats/* directory
to the $SYBASE/nnsy/formats directory.
3
4
Open a command window, and change to the $SYBASE/nnsy directory.
Run the following commands:
NNFie -i formats\custscomp.exp -s new_format_demo -o
NNFie -i formats/stdcustrecformatscomp.exp -s
new_format_demo -o
NNFie -i formats/stdmoneytransformatscomp.exp -s
new_format_demo -o
Note
Running the NNFiecommands overwrites formats in your database and
generates conflict warnings. Because field names do not change and old maps
are not affected, you can ignore these warnings.
Upgrading EAServer components
A new version of the PATRIOT Act EJB and an update to the jConnect files are
included with this upgrade.
❖
Deleting the existing PATRIOTAct package
Before you can upgrade to 2.2, you must remove the current package.
1
2
3
Connect to Jaguar Manager as 'jagadmin'
Expand Jaguar Manager | Packages.
Right-click PatriotAct, choose Delete Package, then click Yes to delete
the package.
4
5
Expand Jaguar Manager | Servers | Jaguar | Installed Services.
Right-click Loader, choose Remove Service, then click OK to remove
the loader.
Upgrade Guide
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading EAServer components
6
Right click Scheduler, choose Remove Service, then click OK to remove
the scheduler.
7
8
Expand Jaguar Manager | Servers | Jaguar and select Shutdown.
Right-click Jaguar, choose Shutdown.
Make sure the %JAGUAR%\Repository\Component\PatriotAct directory
(Windows) or $JAGUAR/Repository/Component/PatriotAct (Solaris)
directory does not exist. If it does, start Jaguar again and redo steps 1 - 7.
9
Start Jaguar Server.
❖
Deploying the new dispatcher.jar to Jaguar
Importing an EJB into the Jaguar Service allows the component to register with
the application server.
1
Expand Jaguar Manager, right click Packages, point to Deploy, choose
EJB Jar.
2
When the Deploy Wizard appears, click Browse, navigate to one of the
following directories:
•
•
%PATRIOT%\Release2.2\jaguar (Windows)
$PATRIOT/Release2.2/jaguar (Solaris)
Choose dispatcher.jar, click Select.
3
Verify the following deployment options.
Option Group
Options
Deployment Strategy
Deployment Options
Full Deployment
•
•
•
Prompt before overwriting objects
Automatically generate EJB stubs and skeletons
Use Interoperable Naming
4
5
6
Click Next to deploy the file, then click Close to return to Jaguar Manager.
Expand Jaguar Manager | Servers | Jaguar.
Right-click Installed Packages, choose Install an Existing Package,
select PatriotAct, then click OK.
❖
Creating the Scheduler component
Follow the steps in this section to create a Scheduler component.
1
Expand Jaguar Manager | Servers | Jaguar | Installed Packages.
14
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Upgrading to version 2.2
2
3
Right-click PatriotAct, choose New Component.
When the Component Wizard appears, choose Define New Component,
click Next, and Next again.
4
5
In the Component name box, type Scheduler, click Finish.
When the Component Properties sheet appears, the General tab is in
focus. Modify the Java Class name to read
com.sybase.patriotact.filter.SchedulerImpl, then click OK to return to
Jaguar Manager.
6
Expand the Scheduler component, right-click Interfaces, choose Add
Interfaces.
The Install Interface dialog appears.
7
8
From the Available IDL Interfaces drop down box, choose CtsServices.
Three CtsServices appear in the right pane.
Select CtsServices::Generic Service, click Add, then click Install.
The Scheduler component is now available as part of the PatriotAct
package.
9
Expand Servers | Jaguar.
10 Right-click Installed Services, choose Install Service, select
PatriotAct/Scheduler from the list, then click OK to return to Jaguar
Manager.
❖
Creating the Loader component
1
2
3
Expand Jaguar Manager | Servers | Jaguar | Installed Packages.
Right click PatriotAct, choose New Component.
When the Component Wizard appears, choose Define New Component,
click Next, then click Next again.
4
5
In the Component Name box, type Loader, then click Finish.
When the Component Properties sheet appears, the General tab is in
focus. Modify the Java Class name to read
com.sybase.patriotact.filter.LoaderImpl, then click OK to return to Jaguar
Manager.
6
7
Expand the new Loader component, right-click Interfaces, select Add
Interfaces.
From the Available IDL Interfaces drop down box, choose CtsServices.
Upgrade Guide
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading EAServer components
Three CtsServices appear in the right pane
8
9
Select CtsServices::Generic Service, click Add, then click Install.
The Loader component is now available.
Expand Servers | Jaguar.
10 Right-click Installed Services, choose Install Service, select
PatriotAct/Loader from the list, then click OK to return to Jaguar
Manager.
❖
Generating Scheduler stubs and skeletons
Generating Java stubs and skeletons ensures that the Jaguar Server has the
information necessary to interact with the components.
1
2
Expand Servers | Jaguar | Installed Packages | PatriotAct.
Right-click on the Scheduler component, choose Generate
Stub/Skeleton.
3
When the Generate Stubs and Skeletons dialog appears, choose the
following options:
•
•
•
•
•
•
•
Generate Stubs
Generate Java Stubs and choose CORBA from the drop down box
Generate Java Files and use the default directory
Compile Java Stubs
Generate Skeletons and use the default directory
Compile Java Skeletons and use the default directory
Leave everything else as default
4
5
Click Generate.
After the code generates successfully, click OK to return to Jaguar
Manager.
❖
Generating Loader stubs and skeletons
1
2
Right-click on the Loader component, choose Generate Stub/Skeleton.
When the Generate Stubs and Skeletons dialog appears, choose the
following options:
•
•
Generate Stubs
Generate Java Stubs and choose CORBA from the drop down box
16
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Upgrading to version 2.2
•
•
•
•
•
Generate Java Files and use the default directory
Compile Java Stubs
Generate Skeletons and use the default directory
Compile Java Skeletons and use the default directory
Leave everything else as default
3
4
Click Generate.
After the code generates successfully, click OK to return to Jaguar
Manager.
❖
Generating PatriotAct stubs and skeletons
1
Right-click on the PatriotAct component, choose Generate
Stub/Skeleton.
2
When the Generate Stubs and Skeletons dialog appears, choose the
following options:
•
•
•
•
•
•
•
Generate Stubs
Generate Java Stubs and choose EJB from the drop down box
Generate Java Files and use the default directory
Compile Java Stubs
Generate Skeletons and use the default directory
Compile Java Skeletons and use the default directory
Leave everything else as default
3
4
Click Generate.
After the code generates successfully, click OK to return to Jaguar
Manager.
Updating the filter properties file
Add the following settings into the existing Filter.properties file in
%JAGUAR%\bin (Windows) or $JAGUAR/bin (Solaris):
#PatStopWords
select_preMatchStopWords = select word from
PatStopWords where is_active = 1
Upgrade Guide
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading EAServer components
select_scoreMatchStopWords = select word from
PatStopWords where priority = 1 and is_active = 1
QuickWordsThreshhold=30
Setting the PATRIOTAct component properties
Follow the instructions in this section to set the PATRIOTAct component
properties.
❖
Setting Controller component properties
1
2
3
Expand Servers | Jaguar | Installed Packages | PatriotAct.
Right-click Controller, choose Component Properties.
When the Controller properties sheet appears, click the Transactions tab,
choose Not Supported.
4
Click the Run As Identity tab, do this:
•
•
Set the Run As Identity property to system.
Set the Mapped to Jaguar Identity property to system.
5
Click the Resource Refs tab, do this:
•
•
In the Resource factories referenced in code group, set the Sharing
Scope of the jms/JMSQCFactory to shareable, then choose
javax.jms.QueueConnectionFactory as the Resource Link.
In the Resource factories referenced in code group, set the Sharing
Scope of the jdbc/DBConnection to shareable, then choose
PATRIOTdbConnection as the Resource Link.
6
Click the Resource Env Refs tab, do this:
•
In the Resource environmental references group, click
jms/ErrorQueue, then set the Link Value to error.
•
In the Resource environmental references group, click
jms/ResultQueue then set the Link Value to from_filters.
7
8
Click the MDB Type tab, set the Name property to to_filters.
Click OK to return to Jaguar Manager.
❖
Setting the FTPLoad component properties
Right-click FTPLoad, choose Component Properties.
1
18
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Upgrading to version 2.2
2
3
When the Connection Properties sheet appears, click the Transactions
tab, choose Not Supported
Click the EJB Refs tab, do this:
In the EJBs referenced in code group, click ejb/NightlyFilter, then set the
Link Value to PatriotAct/NightlyFilter.
4
Click the Resource Refs tab, do this:
In the Resource factories referenced in code group, set the Sharing
Scope of the jdbc/CacheName to shareable, then set the Resource Link
to PATRIOTdbConnection.
5
Click OK to return to Jaguar Manager.
❖
❖
Setting the Loader component properties
1
2
Right-click Loader, choose Component Properties.
When the Connection Properties sheet appears, click the Transactions
tab, choose Not Supported.
3
Click OK to return to Jaguar Manager.
Setting the NightlyFilter component properties
1
2
Right-click NightlyFilter, choose Component Properties.
When the Connection Properties sheet appears, click the Transactions
tab, choose Requires New.
3
Click the Resource Refs tab, do this:
•
•
In the Resource factories referenced in code group, set the Sharing
Scope of the jdbc/CacheName to sharable, then set the Resource
Link to PATRIOTdbConnection.
In the Resource factories referenced in code group, set the Sharing
Scopeof the jdbc/DBConnection to shareable, then set the Resource
Link to PATRIOTdbConnection.
4
Click OK to return to Jaguar Manager.
❖
Setting the Scheduler component properties
1
2
Right-click Scheduler, choose Component Properties.
When the Connection Properties sheet appears, click the Transactions
tab, choose Not Supported.
3
Click OK to return to Jaguar Manager.
Upgrade Guide
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Portlets
❖
Setting the TableClean component properties
1
2
Right-click TableClean, choose Component Properties.
When the Connection Properties sheet appears, click the Transactions
tab, choose Requires New.
3
Click the Resource Refs tab, do this:
In the Resource factories referenced in code group, set the Sharing
Scope of the jdbc/CacheName to shareable, then set the Resource Link
to PATRIOTdbConnection.
4
5
Click OK to return to Jaguar Manager.
Shutdown and restart EAServer.
Configuring Portlets
This section tells you how to install and configure the 2.2 portlets.
❖
Setting single login properties
Previous versions of PATRIOT Starter Kit sometimes allowed users to login
more than once with the same login name. Updates to the
portalinterface.properties allow you to restrict users to a single login at a time.
1
Back up the following files.
Note
Directory paths below are in UNIX notation. For DOS, change forward
slashes to back slashes; change $JAGUAR to %JAGUAR%.
Subdirectory
Filename
$JAGUAR/html/classes
PI_Errors.properties
Errors.class.
$JAGUAR/html/classes/com/
sybase/ep/portalinterface
$JAGUAR/html/classes/com/sybase/ep/ SecurityServiceImpl.class
portalinterface/services
$JAGUAR/META-INF
MANIFEST.MF
2 Extract onelogin.zip into $JAGUAR.
20
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Upgrading to version 2.2
If WinZip notifies you that you are about to overwrite existing files, click
Yes to confirm the file overwrite.
3
4
5
Back up $JAGUAR/html/classes/portalinterface.properties.
Use a text editor to open portalinterface.properties.
Add the following properties to the end of the file:
security.cache.name=SecDboCache
enforce.single.login=true
6
7
Save the portalinterface.properties file.
Shut down and restart Jaguar Server.
Installing updated portlets
This section tells you how to install updates to the portlets. There are separate
instructions for Windows and Solaris-based installations.
Windows
Use these instructions to install the 2.2 portlets on Windows.
1
2
3
Copy the *.pz files from %PATRIOT%\portlets to
%SYBASE%\PortalInterface-2_5\bin.
With ASE and Jaguar Server running, open a command window and
navigate to %SYBASE%\PortalInterface-2_5\bin.
Run pz.bat with the following syntax:
pz.bat -H <ASE_hostname> -N <ASE_Port> -U
<ASE_username> -P <ASE_password> -F
PatriotPortlets22.pz.
4
5
Select Import Portlet from Archive and press ENTER.
Select Import Archived Portlets and then press ENTER.
This step imports the portlets. Choose ALL to any overwrite question;
choose No to any create duplicate question. An Import Done message
notifies you when this process is complete.
6
7
Select X and X to exit the PortalZipper tool.
Shut down and restart Jaguar Server.
Solaris
Use these instructions in install the 2.2 portlets on Solaris.
1
Copy the *.pz files from $PATRIOT/portlets to $SYBASE/PortalInterface-
2_5/bin.
Upgrade Guide
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Portlets
2
3
With ASE and Jaguar Server running, open a command window, and
change to the $SYBASE/PortalInterface-2_5/bin directory.
Run pz.sh with the following syntax:
pz.sh -H <ASE_hostname> -N <ASE_Port> -U
<ASE_username> -P <ASE_password> -F
PatriotPortlets22.pz.
4
5
Select Import Portlet from Archive and press ENTER.
Select Import Archived Portlets and then press ENTER.
This step imports the portlets. Choose ALL to any overwrite question;
choose No to any create duplicate question. An Import Done message
notifies you when this process is complete.
6
7
Select X and X to exit the PortalZipper tool.
Shut down and restart Jaguar Server.
Creating directories for the class files
If the following directories do not exist, create these directories for the new
class files.
Note
Directory paths below are in UNIX notation. For Windows, change forward
slashes to back slashes; change $JAGUAR to %JAGUAR%.
•
•
•
•
•
•
•
•
$JAGUAR/html/classes/com/sybase/ilab
$JAGUAR/html/classes/com/sybase/ilab/utils
$JAGUAR/html/classes/com/sybase/ilab/pi
$JAGUAR/html/classes/com/sybase/ilab/pi/pim
$JAGUAR/html/classes/com/sybase/ilab/pi/pim/tasks
$JAGUAR/html/classes/com/sybase/ilab/pi/security
$JAGUAR/html/classes/com/sybase/ilab/pi/security/beans
$JAGUAR/html/classes/com/sybase/ilab/pi/security/services
22
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Upgrading to version 2.2
Installing the Account Management portlet
This section tells you how to install the Account Management portlet. There
are separate instructions for Windows and Solaris-based installations.
Windows
Use these instructions to install the Account Management portlet on Windows.
1
With ASE and Jaguar Server running, open a command window, and copy
%PATRIOT%\Portlets\PatAcctManagementPortlet.pz to
%SYBASE%\PortalInterface-2_5\bin.
2
3
Change to the %SYBASE%\PortalInterface-2_5\bin directory.
Run pz.bat with the following syntax:
pz.bat -H <ASE_hostname> -N <ASE_port_number> -F
PatAcctManagementPortlet.pz
4
5
Select Import Portlet from Archive and press ENTER.
Select Import Archived Portlets and then press ENTER.
This step imports the portlets. Choose ALL to any overwrite question;
choose No to any create duplicate question. An Import Done message
notifies you when this process is complete.
6
7
Select X and X to exit the PortalZipper tool.
Change to %JAGUAR%\html\portal\html\v4 directory, and use an editor
to change the properties of the ilab_changeInfo.html and
ilab_changePWD.html files. In both files, change the line that reads:
<jtf:setProperty name="IIOP_URL"
value="iiop://yongming-pc:9000"/>
to
<jtf:setProperty name="IIOP_URL"
value="iiop://<yourhost>:<yourport>"/>
8
9
Change to the %JAGUAR%\html\classes\com\sybase\ilab\pi\pim\tasks
directory, and rename PIMControl.class to PIMControl.class.old
Shut down and restart Jaguar Server.
Solaris
Use these instructions to install the Account Management portlet on Solaris.
1
2
With ASE and Jaguar Server running, open a command window, and copy
$PATRIOT/Portlets/PatAcctManagementPortlet.pz to
$SYBASE/PortalInterface-2_5/bin.
Change to the $SYBASE/PortalInterface-2_5/bin directory.
Upgrade Guide
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Portlets
3
Run pz.sh with the following syntax:
pz.sh -H <ASE_hostname> -N <ASE_port_number> -F
PatAcctManagementPortlet.pz
4
5
Select Import Portlet from Archive and press ENTER.
Select Import Archived Portlets and then press ENTER.
This step imports the portlets. Choose ALL to any overwrite question. An
Import Done message notifies you when this process is complete.
6
7
Select X and X to exit the PortalZipper tool.
Change to the $JAGUAR/html/portal/html/v4 directory, and use an editor
to change the properties of the ilab_changeInfo.html and
ilab_changePWD.html files. In both files, change the line that reads:
<jtf:setProperty name="IIOP_URL"
value="iiop://yongming-pc:9000"/>
to
<jtf:setProperty name="IIOP_URL"
value="iiop://<yourhost>:<yourport>"/>
8
9
Change to the $JAGUAR/html/classes/com/sybase/ilab/pi/pim/tasks
directory, and rename PIMControl.class to PIMControl.class.old
Shut down and restart Jaguar Server.
Verifying the Account Management portlet deployment
This step tells you how to test the Account Manager portlet.
1
2
Start Internet Explorer and enter the URL:
Log into Portal Interface using the user ID, pso, with the password
123qwe.
3
4
Click the Admin link at the top of the page.
On the Admin Entry Page, click Choose Portlets from the Admin
Portal Control.
5
6
On the Choose Portlets panel, move the Account Management portlet
from the Available Portlets box to the Selected Portlets box, click Done.
From the Customize drop down box, choose the PATRIOT Test page.
24
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Upgrading to version 2.2
The PATRIOT Test page should display with the new portlet accessible.
Setting up Account Management for the pacuser
To enable access to each of the PATRIOT portlets for pacuser, you need to
modify the properties for each portlet and include the PIUser Role as detailed
below. These instruction assume that you are logged in as ‘pso’.
1
Select the Admin link on the Welcome bar at the top of the browser to
enter Administrative mode.
2
From the Select a Page drop down box in the upper right-hand corner of
the page, select the PATRIOT Test page.
The PATRIOT Test page appears with the new Account Management
portlet accessible.
3
For the Account Management portlet, do this:
•
Click the Edit link in the title bar and modify the URL property from
iiop://yongming-pc:9000
to
iiop://<yourhost>:<yourport>
then click Done.
•
•
•
•
•
From the Select a Page drop down box, select the PATRIOT Test
page to return to the Admin Entry Page.
Select the PATRIOT Test link in the snail trail to navigate back to the
PATRIOT Test page
Select the icon located next to the Edit hyperlink in each of the portlet
title bars on the page.
On the Window Properties panel, select the Edit Portlet Properties
link to display the Edit Portlet panel containing the portlet properties.
In the Portlet Rights section, select the PIUser role from the Role
List and click the right arrow to move it to the Roles with Rights to
this Portlet list on the right.
•
Click Done.
4
Log out of Portal Interface.
Upgrade Guide
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Portlets
5
6
Change to the %JAGUAR%\html\classes\com\sybase\ilab\pi\pim\tasks
directory (Windows) or
$JAGUAR/html/classes/com/sybase/ilab/pi/pim/tasks (Solaris) and
rename PIMControl.class.old to PIMControl.class.
Shut down and restart Jaguar Server.
Creating the Account Management portlet for pacuser
Multiple portlet pages will be created for the PATRIOTcompliance Solution,
and each page includes a number of the portlets imported into the Portal
Interface.
1
Start Internet Explorer and enter the URL:
2
3
4
Log into Portal Interface using the user ID pacuser with the password
pacuser.
Click Add Page in the Portal Control. Name this page Account
Managment and click Done.
When the Choose Portlets panel appears, select Account Management
from the Available Portlets box on the left and click the right arrow to
move each portlet to the Selected Portlets box on the right.
5
6
Click Done to save the portlet page with the selected portlets.
Log out of Portal Interface and close the browser.
Verifying deployment of the new and updated portlets
Test the newly deployed portlets.
1
If you are not logged in as pso, start Internet Explorer and enter the URL:
http://<jaguar_hostname>:8080/, and log into Portal Interface with the
user ID pso and password 123qwe.
2
3
Select the Admin link on the Hello, New Portal User bar at the top of the
page to enter the Admin Entry Page.
From the Customize drop down box, choose the page you want to use to
test the portlets, PATRIOT Test, for example. Or you can create a new
page to test the portlets. Click Done.
26
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Upgrading to version 2.2
4
On the Choose Portlets panel, choose the new and updated portlets from
the Available Portlets box and move them into the Selected Portlets box.
These include:
•
•
•
Pat Logged In Users
Pd Exp Notification
Stop Words Candidate
5
6
Click Done.
From the Customize drop down box, choose the page where you added
the portlets, PATRIOT Test for example.
The test page appears with the portlets you selected.
Setting up the new portlets for pacuser
This series of steps tell you how to grant pacuser access rights to the new and
updated portlets. This section assumes you are logged in as pso.
Note
The Pat Logged In Users portlet is intended for pso users only. Do not grant
access rights to this portlet to pacuser.
1
2
On the Admin Entry Page, choose the test page, PATRIOT Test for
example, where you added the new portlets from the Customize drop
down box.
When the test page appears, do this for each new portlet on the page.
•
Click the icon next to the Edit link on the title bar, and when the the
Window Properties panel appears, click Edit Portlet Properties.
•
On the Edit Portlet panel, in the Portlet Rights group, move
PIUserfrom the Role List into the Roles with Rights to this Portlet
box.
•
•
Click Done.
Choose the test page, PATRIOT Test for example, where you added
the new portlets from the Customize drop down box.
3
Log out of Portal Interface.
Upgrade Guide
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Portlets
Creating portlet pages for pacuser
1
If you are not logged in as pacuser, start Internet Explorer, enter the URL:
http://<jaguar_hostname>:8080/, and log into Portal Interface with the
user ID pacuser and password pacuser.
2
3
On the Home Page, click Add Page from the Portal Control, name the
page, click Done.
On the Choose Portlets panel, move the appropriate portlets from the
Available Portlets box into the Selected Portlets box on the right. Click
Done.
Each Patriot portlet page should now be accessible from the Personalize
drop down box in the upper right-hand corner. Select each of these pages
to verify that the portlets have been installed and configured properly.
4
5
Repeat steps 2-3 to add the appropriate portlets for each new portlet page
Log out of Portal Interface and close the browser.
28
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
upgrade Process Server 11
dispatcher jar
A
Account Management portlet
creating 26
deploying 14
deploying 24
installing 23
pacuser 25
EAServer components
C
compliance solution
filter properties 17
scheduler 14
upgrading 13
introduction
overview
1
2
component properties
controller 18
FTPLoad 18
loader 19
environmenatal variables
7
NightlyFilter 19
scheduler 19
setting 18
upgrade scripts
9
TableClean 20
components
loader 15
filter properties 17
importing 12
upgrading 12
FTPLoad
scheduler 14
stubs and skeletons 16
connection caches
9
epSearchCache 10
know issue 10
PATRIOTActdbConnection 10
PortalInterfaceCache 10
component properties 18
contents
controller
component properties 18
6
introduction
compliance solution
1
issues addressed in this release
4
D
database upgrade
8
definitions
Upgrade Guide
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
verifying new portlets 26
L
loader
preface
v
component properties 19
creating 15
stubs and skeletons 16
Process Server
upgrade definitions 11
process server definitions
loading
login properties 20
6
upgrading 11
N
R
NightlyFilter
release contents
component properties 19
S
scheduler
O
overview
component properties 14, 19
creating 14
compliance solution
upgrading
2
execute upgrade
9
stubs and skeletons
PATRIOTAct 17
scheduler 16
system environment
P
pacuser
account management portlet setup 25
creating account management portlet 26
creating portlet pages for 28
new portlet setup 27
verify variables
PATRIOT database
modifying connection caches
9
upgrading
PATRIOTAct
8
stubs and skeletons 17
PATRIOTAct package
deleting 13
Portlets
account management 23, 24, 25, 26
class file directories 22
configuring 20
installing new portlets 21
login properties 20
new portlets and pacuser 27
pacuser pages 26
pacuser portlet pages 28
setting up pacuser 25
execute scripts
Process Server definitions 11
version 2.1
upgrading
contents
database upgrade
9
3
6
8
30
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
EAServer components 13
environmenatal variables
formats 12
7
issues addressed in this release
loading
modifying connection caches
overview
4
6
9
4
portlets 20
Process Server definitions 11
upgrading database
V
variables
verify system environment
verify
system environment
7
7
version 2.1
upgrade
3
Upgrade Guide
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
32
PATRIOTcompliance Starter Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
|