2-661-595-13(1)
DVD Home Theatre
System
Operating Instructions
*
*DAV-DX255/DX315 only
DAV-DX155/DX255/DX315
©2006 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
disconnect the cord, pull it out by the plug, never by
the cord.
Installing
• Allow adequate air circulation to prevent internal
heat buildup.
• Do not place the unit on surfaces (rugs, blankets, etc.)
or near materials (curtains, draperies) that may block
the ventilation slots.
• Do not install the unit near heat sources such as
radiators, or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration, or
shock.
• Do not install the unit in an inclined position. It is
designed to be operated in a horizontal position only.
• Keep the unit and discs away from equipment with
strong magnets, such as microwave ovens, or large
loudspeakers.
• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to a warm
location, moisture may condense inside the DVD
Home Theatre System and cause damage to the
lenses. When you first install the unit, or when you
move it from a cold to a warm location, wait for about
30 minutes before operating the unit.
Welcome!
Thank you for purchasing Sony DVD Home
Theatre System. Before operating this system,
please read this manual thoroughly and retain it
for future reference.
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
This System Can Play the Following
Step 1: Assembling
Selecting [ORIGINAL] or [PLAY LIST]
Viewing Information About
Adjusting the Delay Between the Picture
About MP3 Audio Tracks and JPEG
Playing DATA CDs or DATA DVDs with
Files................................................ 50
Playing Audio Tracks and Images as a
(Except for North American
Step 2: Connecting the System and
Step 4: Performing the Quick
Enjoying the Radio or Other
Enjoying TV or VCR Sound from All
Selecting the Movie or Music
Playing VIDEO CDs with PBC Functions
Enjoying Surround Sound by Using Sound
Searching for a Particular Point
(Scan, Slow-motion Play, Freeze
Searching for a Title/Chapter/Track/
Controlling the TV with the Supplied
Using the THEATRE SYNC
Resuming Playback from the Point Where
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
(CUSTOM PARENTAL
CONTROL)
Getting Optimal Surround Sound for a
Calibrating the Appropriate Settings
Setting the Display or Sound Track
(When letters/numbers appear in
5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1)MP3 (MPEG1 Audio Layer 3) is a standard format
defined by ISO/MPEG which compresses audio data.
2)Except for North American models.
About This Manual
®
3) DivX is a video file compression technology,
• The instructions in this manual describe the
controls on the remote. You can also use the
controls on the system if they have the same or
similar names as those on the remote.
• The instructions in this manual are for DAV-
DX155, DAV-DX255, and DAV-DX315.
DAV-DX155 is the model used for illustration
purposes only. Any difference in operation is
clearly indicated in the text, for example,
“DAV-DX155 only.”
developed by DivX, Inc.
4) DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under license.
• The Control Menu items may be different
depending on the area.
• “DVD” may be used as a general term for
DVD VIDEOs, DVD+RWs/DVD+Rs, and
DVD-RWs/DVD-Rs.
• Measurements are expressed in feet (ft) for
North American models.
• The following symbols are used in this
manual.
Symbol
Meaning
Functions available for DVD
VIDEOs, DVD-Rs/DVD-RWs in
video mode, and DVD+Rs/
DVD+RWs
Functions available for DVD-Rs/
DVD-RWs in VR (Video
Recording) mode
Functions available for VIDEO
CDs (including Super VCDs or CD-
Rs/CD-RWs in video CD format or
Super VCD format)
Functions available for music CDs
or CD-Rs/CD-RWs in music CD
format, including discs containing
CD Graphics (Latin American
models only)
Functions available for DATA CDs
(CD-ROMs/CD-Rs/CD-RWs)
containing MP31) audio tracks,
JPEG image files, and DivX2)3)4)
video files
Functions available for DATA
DVDs (DVD-ROMs/DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs)
containing MP31) audio tracks,
JPEG image files, and DivX2)3)4)
video files
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
– MP3 audio tracks, JPEG image files, and
DivX video files* of format conforming to
ISO 9660 Level 1/Level 2, or its extended
format, Joliet
This System Can Play the
Following Discs
The system can play DVD-ROMs/DVD+RWs/
DVD-RWs/DVD+Rs/DVD-Rs recorded in the
following formats:
Format of
Disc logo
discs
DVD VIDEO
– MP3 audio tracks, JPEG image files and
DivX video files* of format conforming to
UDF (Universal Disc Format)
DVD-RW/
DVD-R
* Except for North American models
Example of discs that the
system cannot play
DVD+RW/
DVD+R
The system cannot play the following discs:
• CD-ROMs/CD-Rs/CD-RWs other than those
recorded in the formats listed on page 7
• CD-ROMs recorded in PHOTO CD format
• Data part of CD-Extras
• DVD Audios
• Super Audio CD
VIDEO CD
(Ver. 1.1 and
2.0 discs)/CD
Graphics
• DATA DVDs that do not contain MP3 audio
tracks, JPEG image files, or DivX video files*.
* Except for North American models
• DVD-RAMs
(Latin
American
models only)/
Audio CD
Also, the system cannot play the following
discs:
CD-RW/CD-R
(audio data)
(MP3 files)
• A DVD VIDEO with a different region code
• A disc that has a non-standard shape (e.g.,
card, heart)
(JPEG files)
• A disc with paper or stickers on it
• A disc that has the adhesive of cellophane tape
or a sticker still left on it
Notes about CD-R/CD-RW/DVD-R/
DVD-RW/DVD+R/DVD+RW
“DVD+RW,” “DVD-RW,” “DVD+R,”
“DVD VIDEO,” and the “CD” logos are trademarks.
In some cases, CD-R/CD-RW/DVD-R/DVD-
RW/DVD+R/DVD+RW cannot be played on
this system due to the recording quality or
physical condition of the disc, or the
characteristics of the recording device and
authoring software.
Note about CDs/DVDs
The system can play CD-ROMs/CD-Rs/CD-
RWs recorded in the following formats:
– audio CD format
The disc will not play if it has not been correctly
finalized. For more information, see the
– CD Graphics (Latin American models only)
– video CD format
continued
7GB
Download from Www.Somanuals.com. All Manuals Search And Download.
ALL
operating instructions for the recording device.
Note that some playback functions may not
work with some DVD+RWs/DVD+Rs, even if
they have been correctly finalized. In this case,
view the disc by normal playback. Also some
DATA CDs/DATA DVDs created in Packet
Write format cannot be played.
DVD VIDEOs labeled
system.
will also play on this
If you try to play any other DVD VIDEO, the
message [Playback prohibited by area
limitations.] will appear on the TV screen.
Depending on the DVD VIDEO, no region code
indication may be given even though playing the
DVD VIDEO is prohibited by area restrictions.
Music discs encoded with
copyright protection
technologies
Note on playback operations
of DVDs and VIDEO CDs
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
Some playback operations of DVDs and VIDEO
CDs may be intentionally set by software
producers. Since this system plays DVDs and
VIDEO CDs according to the disc contents the
software producers designed, some playback
features may not be available. Also, refer to the
instructions supplied with the DVDs or VIDEO
CDs.
Note on DualDisc
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does not
conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
Copyrights
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
About Multi Session CD
• This system can play Multi Session CDs when
an MP3 audio track is contained in the first
session. Any subsequent MP3 audio tracks
recorded in later sessions can also be played
back.
• This system can play Multi Session CDs when
a JPEG image file is contained in the first
session. Any subsequent JPEG image files
recorded in later sessions can also be played
back.
This system incorporates with Dolby* Digital
and Dolby Pro Logic (II) adaptive matrix
surround decoder and the DTS** Digital
Surround System.
* Manufactured under license from Dolby
Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol are
trademarks of Dolby Laboratories.
**Manufactured under license from Digital Theater
Systems, Inc.
• If audio tracks and images in music CD format
or video CD format are recorded in the first
session, only the first session will be played
back.
“DTS” and “DTS Digital Surround” are trademarks
of Digital Theater Systems, Inc.
Region code
Your system has a region code printed on the
rear of the unit and will only play DVDs labeled
with the same region code.
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started – BASIC –
See Unpacking in Specifications, page 84.
Inserting batteries into the remote
You can control the system using the supplied remote. Insert two R6 (size AA) batteries by matching
the 3 and # ends on the batteries to the markings inside the compartment. When using the remote,
point it at the remote sensor on the system.
Note
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
Attaching the foot pads to the subwoofer
Attach the supplied foot pads to the bottom of the subwoofer to stabilize the subwoofer and prevent it
from slipping.
9GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Assembling the Speakers
Before connecting the speakers, attach the speaker stand to the speaker.
(For the front speakers of DAV-DX315 only.)
Note
• Spread a cloth on the floor to avoid damaging the floor.
Tip
1
Secure the post to the base.
The long post is for floor use, the short post is for tabletop use.
or
Post (short)
Post (long)
Base
2
Draw the speaker cord through the hole on the base, then stand it up.
Bottom of the
base
,
Speaker cord
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Secure the pedestal to the post.
Note
• If it is hard to secure the pedestal, remove and secure it again. Securing the pedestal forcibly may ruin the
screw threads.
4
Connect the speaker cords to the speaker, then run them through the slots (A, B, C,
and D) all the way.
A
B
C
D
continued
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Slide the speaker down slowly onto the pedestal.
Adjust the length of the speaker cord.
Note
• Do not catch the speaker cord between the speaker and the pedestal.
• Do not drop the speaker when mounting.
6
Secure the speaker with the screws in order 1 to 2.
1
2
Screws (2)
(supplied)
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Connecting the System and TV
This hookup is the basic connection of the system to the speakers and TV. For other TV connections,
To accept progressive signals, see page 25.
Refer to the connection diagram below, and read the additional information from 1 to 4 on the
following pages.
DAV-DX155/DX255
Front speaker (L)
Front speaker (R)
Center speaker
AM loop antenna (aerial)
ANTENNA
AM
MONITOR OUT
VIDEO
SPEAKER
COMPONENT VIDEO OUT
TV/VCR
COAXIAL
FM75
Y
P
B/CB
PR/CR
S
VIDEO
(DVD ONLY)
FRONT
R
FRONT
L
CENTER
WOOFER
SUR
R
SUR
L
R
AUDIO IN
L
(DVD ONLY)
AC power cord (mains lead)
FM wire antenna
(aerial)
B
A
VIDEO
IN
AUDIO
OUT
L
R
Subwoofer
TV
Surround speaker (R)
Surround speaker (L)
continued
13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
DAV-DX315
Front speaker (L)
Front speaker (R)
Center speaker
AM loop antenna (aerial)
ANTENNA
AM
MONITOR OUT
PEAKER
COMPONENT VIDEO OUT
TV/VCR
COAXIAL
FM75
Y
P
B/CB
PR/CR
S
VIDEO
(DVD ONLY)
FRONT
R
FRONT
L
CENTER
WOER
S
R
S
L
AUDIO IN
(DVD ONLY)
AC power cord (mains lead)
FM wire antenna
(aerial)
B
A
VIDEO
IN
AUDIO
OUT
L
R
Subwoofer
TV
Surround speaker (R)
Surround speaker (L)
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Connecting the Speakers
Required cords
The connector and color tube of the speaker cords are the same color as the label of the jacks to be
connected.
Color tube
(+)
(–)
Note
• Do not catch the speaker cord insulation in the SPEAKER jack.
To avoid short-circuiting the speakers
Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch
another speaker terminal or the bare wire of another speaker cord, such as shown below.
Stripped speaker cord is
touching another speaker
terminal.
Stripped cords are touching each
other due to excessive removal of
insulation.
After connecting all the components, speakers, and AC power cord (mains lead), output a test tone to
check that all the speakers are connected correctly. For details on outputting a test tone, see page 77.
If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a speaker
other than the one currently displayed on the Setup Display, the speaker may be short-circuited. If this
happens, check the speaker connection again.
Note
• Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the cords
are reversed, the sound will lack bass and may be distorted.
2 Connecting the TV
Required cords
A Video cord
.
Yellow
B Audio cord (not supplied)
White (L/audio)
Red (R/audio)
continued
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
• When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select the “Dolby
3 Connecting the Antenna (Aerial)
To connect the AM antenna (aerial)
Plastic stand (supplied)
Antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
1
2
Remove only the loop part from the plastic stand.
Set up the AM loop antenna (aerial).
3
Connect the cords to the AM antenna (aerial) terminals.
Cord (A) or cord (B) can be connected to either terminal.
Insert until this
part.
A
M
Insert the cords pushing
down the terminal clamp.
B
Note
• Do not place the AM loop antenna (aerial) near the system or other AV equipment, as noise may result.
Tip
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
4
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly.
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect the FM wire antenna (aerial)
Connect the FM wire antenna (aerial) to the COAXIAL FM 75 Ωjack.
FM wire antenna (aerial)
(supplied)
FM wire antenna (aerial)
(supplied)
or
COAXIAL FM 75 Ω jack
COAXIAL FM 75 Ω jack
Note
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
Tip
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the system to an outdoor FM
antenna (aerial) as shown below.
System
Outdoor FM antenna (aerial)
4 Connecting the AC power cord (mains lead)
Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains), connect the
speakers to the system.
Install this system so that the power cord can be unplugged from the wall socket immediately in the
event of trouble.
Changing the color system (PAL or NTSC)
(Asian, Australian, and Middle Eastern models only)
Depending on the TV to be connected, you may be required to select either PAL or NTSC for the color
system.
The initial setting of the system for Australian and Middle Eastern models is PAL.
The initial setting of the system for Asian models is NTSC.
To change the color system
1
2
Turn off the system by pressing "/1.
Turn on the system by pressing "/1 while pressing X on the system.
You need to hold X until the set powers on.
Each time you perform this operation, the color system toggles between PAL and NTSC.
“NTSC” lights up in the front display when the color system is set to NTSC.
17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not lean or hang on the speaker, as the speaker
may fall down.
Step 3: Positioning the
System
Tip
• When you change the positions of the speakers, it is
recommended that you change the settings. For
details, see “Getting Optimal Surround Sound for a
Positioning the speakers
For the best possible surround sound, all the
speakers other than the subwoofer should be the
same distance from the listening position (A).
However, this system allows you to place the
center speaker up to 1.6 meters (5 ft) closer (B)
and the surround speakers up to 5.0 meters (16
ft) closer (C) to the listening position.
The front speakers can be placed from 1.0 to
7.0 meters (3 to 23 ft) (A) from the listening
position.
Place speakers as illustrated below.
Note
• Do not set the speakers in an inclined position.
• Do not place the speakers in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight
• Use caution when placing the speakers and/or
speaker stands (not supplied) that are attached with
the speakers on a specially treated (waxed, oiled,
polished, etc.) floor, as staining or discoloration may
result.
• When cleaning, use a soft cloth such as a cleaning
cloth for glasses.
• Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine.
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE SETUP
OSD:
Step 4: Performing the
Quick Setup
ENGLISH
ENGLISH
FRENCH
MENU:
AUDIO:
SUBTITLE:
SPANISH
PORTUGUESE
Follow the steps below to make the minimum
number of basic adjustments for using the
system.
5
6
Press X/x to select a language.
"/1
The system displays the menu and subtitles
in the selected language.
Press ENTER.
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
SCREEN SETUP
16:9
16:9
TV TYPE:
C/X/x/c
ENTER
SCREEN SAVER:
BACKGROUND:
BLACK LEVEL:
BLACK LEVEL (COMPONENT OUT):
4:3 OUTPUT:
4:3 LETTER BOX
4:3 PAN SCAN
OFF
FULL
DISPLAY
1
2
Turn on the TV.
7
Press X/x to select the setting that
matches your TV type.
Press [/1.
xIf you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
Note
• Disconnect the headphones when you perform
the Quick Setup. You cannot operate steps after
8 with the headphones connected.
• Make sure that the function is set to “DVD.”
xIf you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
3
4
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
8
9
Press ENTER.
The Setup Display for selecting the speaker
formation appears.
[Press [ENTER] to run QUICK SETUP.]
appears at the bottom of the screen. If this
message does not appear, display the Quick
Setup and perform again (page 21).
Press C/c to select the speaker
formation image as the speakers are
actually positioned, then press ENTER.
Press ENTER without inserting a disc.
For details, see “Getting Optimal Surround
The Setup Display for selecting the
language used in the on-screen display
appears.
SPEAKER FORMATION
STANDARD
continued
19GB
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Connect the calibration mic to the
A.CAL MIC jack on the front panel and
press X/x to select [YES], then press
ENTER.
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the
volume down. Give consideration to children
and neighbor.
Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic. Be quiet during the measurement.
• Avoid being in the measurement area and
making noise during the measurement (which
takes about 3 minutes), as it may interfere with
measurement.
11
Unplug the calibration mic and press C/
c to select [YES].
Quick Setup is finished. All connections
and setup operations are complete.
Measurement complete.
FRONT L :
FRONT R :
YES
YES
CENTER
:
NONE
A.CAL MIC
SUBWOOFER : YES
SURROUND L : NONE
SURROUND R : NONE
If OK, unplug calibration mic and select
YES.
Calibration mic
YES
NO
Note
• If measurement fails, follow the message then
retry [AUTO CALIBRATION].
To quit the Quick Setup
Press
DISPLAY in any Step.
Tip
• If you change the position of the speakers, reset the
speaker settings. See “Getting Optimal Surround
• If you want to change any of the settings, see “Using
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
YES
NO
Auto Calibration starts.
20GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To recall the Quick Setup display
1 Press
DISPLAY when the system is in
stop mode.
The Control Menu appears.
2 Press X/x to select
[SETUP], then
press ENTER.
The options for [SETUP] appear.
(
)
)
1 2 2 7
(
1 8 3 4
DVD VIDEO
:
:
QUICK
QUICK
CUSTOM
RESET
3 Press X/x to select [QUICK], then press
ENTER.
The Quick Setup display appears.
21GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• DEMO OFF: sets the demonstration mode
off.
Getting Started – ADVANCED –
4
5
Press ENTER.
The setting is reflected.
Turning off the
Demonstration
Press AMP MENU.
The AMP menu turns off.
"/1
AMP MENU
X/x/c
ENTER
After connecting the AC power cord (mains
lead), the demonstration appears in the front
panel display. When you press "/1 on the
remote, the demonstration turns off.
Note
• When you press "/1on the system, the demonstration
does not turn off.
• When you set the demonstration mode in the AMP
menu to on, the demonstration does not turn off even
though you press "/1 on the remote. To turn off the
demonstration, set the demonstration mode to off,
then press "/1 on the remote. When the
demonstration mode is set to off, the system saves
power in standby mode.
Setting the demonstration
mode on/off
1
2
Press AMP MENU.
Press X/x repeatedly until “DEMO”
appears in the front panel display, then
press ENTER or c.
3
Press X/x to select the setting.
• DEMO ON: sets the demonstration mode
on.
22GB
Download from Www.Somanuals.com. All Manuals Search And Download.
For the other speakers
Installing the Speakers on
a Wall
1
Prepare screws (not supplied) that are
suitable for the hole on the back of
each speaker. See the illustrations
below.
8 to 10 mm
11
13
(
/
to
/
inch)
32
32
5
4 mm ( / inch)
32
3
Hang the speakers on the screws.
3
30 mm (1
/
inch)
16
4.6 mm
3
( / inch)
16
Hole on the back of
the speaker
4.6 mm
3
( / inch)
16
10 mm
13
(
/
inch)
32
10 mm
13
(
/
inch)
32
2
Fasten the screws to the wall.
For the center speaker
160 mm
3
(
6
/
inch)
8
Note
• Use screws that are suitable for the wall material and
strength. As a plaster board wall is especially fragile,
attach the screws securely to a beam and fasten them
to the wall. Install the speakers on a vertical and flat
wall where reinforcement is applied.
8 to 10 mm
• Contact a screw shop or installer regarding the wall
material or screws to be used.
11
13
(
/
to
/
inch)
32
32
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
For the front speakers of DAV-DX315
400 mm
3
(
15
/
inch)
4
8 to 10 mm
11
13
(
/
to
/
inch)
32
32
23GB
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Hookup (Advanced)
Select a hookup suitable for the jacks on your TV.
Connecting the video cords
Sends a played back DVD image to a TV.
Check the jacks of your TV, and choose connection method A, B, or C. Picture quality improves in
order from A (standard) to C (component).
To COMPONENT
VIDEO OUT
ANTENNA
AM
MONITOR OUT
SPEAKER
CMPONEVIDEO T
R
TV/VCR
COAXIAL
FM75
P
P
VIDEO
(D ONLY)
FRONT
R
FRONT
L
CENTER
WOOFER
SUR
R
SUR
L
R
AUDIO IN
L
(DVD ONLY)
To VIDEO
To S VIDEO
A
B
C
S
VIDEO
IN
VIDEO
IN
Y
PB/CB
PR/CR
TV with VIDEO IN jack
TV with S VIDEO IN jack
TV with COMPONENT
VIDEO IN jacks
A To connect to a TV with the VIDEO IN jack
Connect the video cord.
.
Yellow
B To connect to a TV with the S VIDEO IN jack
Connect an S video cord (not supplied). When using the S video jack instead of the video jacks, your
TV monitor must also be connected via an S video jack. S video signals are on a separate bus from the
video signals and will not be output through the video jacks.
24GB
Download from Www.Somanuals.com. All Manuals Search And Download.
C To connect to a TV with the COMPONENT VIDEO IN jacks
Connect a component video cord (not supplied). To use the COMPONENT VIDEO OUT jacks (Y, PB/
CB, PR/CR) instead of the video jacks, your TV monitor must be equipped with via COMPONENT
VIDEO IN jacks (Y, PB/CB, PR/CR). If your TV accepts progressive format signals, you must use this
connection and set the output channel of the system to progressive format (page 25).
Green
Blue
Red
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
To change the aspect ratio, see page 72.
Does your TV accept progressive signals?
Progressive is the method for displaying TV images which reduces flickering, and sharpens the image.
To display using this method, you need to connect to a TV that accepts progressive signals.
PROGRESSIVE
FUNCTION
“PROGRE” lights up in the front panel display when the system outputs progressive signals.
1
2
Press FUNCTION repeatedly to select “DVD.”
Press PROGRESSIVE.
Each time you press PROGRESSIVE, the display changes as follows:
t P AUTO (PROGRESSIVE AUTO)
r
P VIDEO (PROGRESSIVE VIDEO)
r
INTERLACE
continued
25GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x P AUTO (PROGRESSIVE AUTO)
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks.
Normally select this under the above condition. This automatically detects the software type, and
selects the appropriate conversion method.
Note that the picture will not be clear or no picture will appear if you select these settings when
either of the above conditions are not met.
x P VIDEO (PROGRESSIVE VIDEO)
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks, and,
– you want to fix the conversion method to PROGRESSIVE VIDEO for video-based software.
Select this if the image is not clear when you select PROGRESSIVE AUTO.
Note that the picture will not be clear or no picture will appear if you select these settings when
either of the above conditions are not met.
x INTERLACE
Select this setting when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (MONITOR
OUT (VIDEO/S VIDEO)).
About DVD software types and the conversion method
DVD software can be divided into 2 types: film-based software and video-based software.
Video-based software is derived from TV, such as dramas and sit-coms, and displays images at 30
frames/60 fields per second. Film-based software is derived from film and displays images at 24 frames
per second. Some DVD software contains both video and film.
In order for these images to appear natural on your screen when output in progressive format, the
progressive signals need to be converted to match the type of DVD software that you are watching.
Note
• When you play video-based software in progressive signal format, sections of some types of images may appear
unnatural due to the conversion process when output through the COMPONENT VIDEO OUT jacks. Even though
you set to “PROGRESSIVE AUTO” or “PROGRESSIVE VIDEO,” images from the MONITOR OUT (VIDEO or
S VIDEO) jack are unaffected as they are output in the interlace format.
26GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Component Hookup
You can enjoy sound using the speakers of this system by connecting the AUDIO OUT jacks of another
component. For video connection of other components, connect directly to the TV.
Connecting the system and the other component
Outputs the other component through the speakers of this system.
VCR, digital satellite receiver
or PlayStation 2, etc.
AUDIO
OUT
L
R
To TV/VCR (AUDIO IN)
ANTENNA
AM
MONITOR OUT
SPEAKER
COMPONENT VIDEO OUT
B/CB R/CR
V/VC
VIDEO
COAXIAL
FM75
Y
P
P
S
VIDEO
(DVD ONLY)
FRONT
R
FRONT
L
CENTER
WOOFER
SUR
R
SUR
L
R
AUDIO IN
L
(DVD ONLY)
To connect the AUDIO OUT jacks of other component to the TV/VCR
(AUDIO IN) jacks of this system
Connect the VCR or other components to the TV/VCR (AUDIO IN) jacks using the audio cord (not
supplied). When connecting a cord, be sure to match the color-coded sleeves to the appropriate jacks
on the components.
White (L/audio)
Red (R/audio)
To listen to the portable audio source sound through the system
Connect the audio output jacks of the portable audio source to the AUDIO IN jack on the front panel
of the system with the stereo mini-plug cord (not supplied).
continued
27GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
• When listening to MP3 format recordings using a portable audio source, you can enhance the sound.
Press FUNCTION to select “AUDIO.” Connect the portable audio source. Press SOUND FIELD repeatedly until
“A.F.D. STD” appears in the front panel display.
To cancel, select other than “A.F.D. STD.”
Note
• Be sure to make connections securely to avoid hum and noise.
28GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the button of the disc number you
want.
When no disc is in the disc stocker you
selected, “NO DISC” appears. Perform next
Step while “*DISC-1* (eg., 2-5)” flashes.
Basic Operations
Playing Discs
5
6
Press A.
Load a disc.
Place one disc on the tray, and then press A.
Adjust the
volume
FUNCTION
"/1
A
H
Disc tray
Connect
headphones
DISC 1-5
When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc
is not skewed on the inner circle of the tray.
Note
"/1
• Do not forcibly press the disc tray closed with
your finger, as this may cause malfunction.
• Do not place more than one disc on the tray.
DISC SKIP
FUNCTION
7
Press H.
The system starts playback (continuous
play).
To load other discs, press DISC 1-5 (that is
not loaded with a disc) and A and load the
disc.
MUTING
VOLUME +/–
The system starts playback (continuous
play) of the disc whose DISC indicator is
green.
./>
/
H
x
To play back other discs, press DISC SKIP
on the remote or DISC 1-5 of the system.
Adjust the volume on the system.
The volume level appears on the TV screen
and in the front panel display.
X
Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operation details supplied with your
disc.
Note
1
2
Turn on your TV.
• Depending on the system status, the volume level
may not appear on the TV screen.
Switch the input selector on the TV to
this system.
Tip
• The DISC 1-5 indicators change color as follows:
3
Press "/1.
– green: the disc is selected, or the disc is being
played back.
– off: there is no disc.
– orange: a disc is loaded in the disc stocker but not
selected.
– The indicator turns off if an unplayable disc is
The system turns on.
Unless the system is set to “DVD,” press
FUNCTION to select “DVD.”
4
Press DISC 1-5.
inserted.
continued
29GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To save the power in standby
mode
About DVD 5-DISC changer
Press "/1 while the system turns on. To cancel
standby mode, press "/1 once.
Sub Tray
Stocker
Additional operations
DISC 1
DISC 2
Disc
DISC 3
To
Press
DISC 4
DISC 5
Main Tray
Stop
x
Pause
X
Resume play after pause
X or H
Go to the next chapter,
track, or scene
> (except for JPEG)
Playing unit
Go back to the preceding
chapter, track, or scene
. (except for JPEG)
The disc changer consists of a playing unit and a
stocker which transports the discs to the disc slot
and the playing unit.
For example, if you press DISC 3, the stocker
moves until the DISC 3 comes to the position of
the playing unit and then moves the DISC 3 over
the playing unit.
Mute the sound
MUTING. To cancel
muting, press it again
or VOLUME + to
adjust the sound
volume.
Change a disc while playing DISC SKIP
another disc
Note
• Noise may come from the disc changer when
changing discs or turning the system on and off.
However, this is just noise produced by the operation
of the internal mechanisms and does not indicate a
malfunction.
Play the desired disc directly DISC 1-5 on the
system.
Stop play and remove the
desired disc
DISC 1-5 and A on the
system.
Replay the previous scene*
(instant
replay) during
playback.
Briefly fast forward the
current scene**
(instant
advance) during
playback.
* DVD VIDEOs/DVD-RWs/DVD-Rs only. The
button can be used except for DivX video files
(except for North American models).
**DVD VIDEOs/DVD-RWs/DVD-Rs/DVD+RWs/
DVD+Rs only. The button can be used except for
DivX video files (except for North American
models).
Note
• You may not be able to use the Instant Replay or
Instant Advance function with some scenes.
• When playing CD Graphics (Latin American models
only), the picture may not appear smoothly.
30GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Press FUNCTION repeatedly until “TV/
VCR” or “AUDIO” appears in the front
panel display.
Enjoying the Radio or
Other Components
2
3
Press AMP MENU.
Press X/x repeatedly until
“ATTENUATE” appears in the front
panel display, then press ENTER or c.
4
Press X/x to select a setting.
FUNCTION
• ATT ON: attenuates the input level. The
output level is changed.
• ATT OFF: normal input level.
5
6
Press ENTER.
AMP MENU
The setting is reflected.
X/x/c
ENTER
Press AMP MENU.
The AMP menu turns off.
Selecting the connected
component
You can use a VCR or other components
connected to the TV/VCR jacks on the rear
panel. Refer to the operation manual supplied
with the components for further information on
the operation.
Press FUNCTION repeatedly until “TV/
VCR” appears in the front panel display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
DVD t TUNER FM t TUNER AM t
TV/VCR t AUDIO t …
Changing the input level of
the sound from connected
components
Distortion may occur when listening to a
component connected to the TV/VCR jacks on
the rear of the unit or to the AUDIO IN jack on
the front panel. This is not a malfunction and
will depend on the component connected.
To prevent this, you can change the input level
from the sound of the other components.
31GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying TV or VCR Sound
from All Speakers
Selecting the Movie or
Music Mode
You can enjoy TV or VCR sound from all the
speakers in this system.
For details, see “TV Hookup (Advanced)”
You can choose a suitable sound mode for
movies or music.
MOVIE/
MUSIC
FUNCTION
SOUND
FIELD
Press MOVIE/MUSIC during playback.
1
2
Press FUNCTION repeatedly until “TV/
VCR” appears in the front panel
display.
Press MOVIE/MUSIC repeatedly until the
mode you want lights up in the front panel
display. The default setting is underlined.
• AUTO: selects the mode automatically to
produce the sound effect depending on the
disc.
Press SOUND FIELD repeatedly until
the sound field you want appears in the
front panel display.
When you want to output the TV sound or
stereo sound of a 2 channel source from the
6 speakers, select the “PRO LOGIC,” “PLII
MOVIE,” or “PLII MUSIC” sound field.
• MOVIE: provides the sound for movies.
• MUSIC: provides the sound for music.
Tip
• When the movie or music mode is selected,
“MOVIE” or “MUSIC” is displayed in the front panel
display.
Note
• You cannot operate these setup items when you
connect headphones to the system.
32GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic outputting of the
original sound
Sound Adjustments
x AUTO FORMAT DIRECT STANDARD
The auto decoding function automatically
detects the type of audio signal being input
(Dolby Digital, DTS, or standard 2 channel
stereo) and performs the proper decoding if
necessary. This mode presents the sound as it
was recorded/encoded, without adding any
effects (e.g. reverberation).
Enjoying Surround Sound
by Using Sound Field
You can take advantage of surround sound
simply by selecting one of system’s pre-
programmed sound fields. They bring the
exciting and powerful sound of movie theaters
into your home.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.), it will generate a low
frequency signal for output to the subwoofer.
Outputting the sound from
multiple speakers
x AUTO FORMAT DIRECT MULTI
This mode lets you enjoy audio playback of all
types of discs from multiple speakers.
SOUND
FIELD
Outputting 2 channel sources
like CDs by 5.1channel
x Dolby Pro Logic
Dolby Pro Logic produces five output channels
from 2 channel sources. This mode performs Pro
Logic decoding to the input signal and output to
front, center, and surround speakers.
Meanwhile, the surround channel becomes
monaural.
Press SOUND FIELD.
Press SOUND FIELD repeatedly until the sound
field you want appears in the front panel display.
x Dolby Pro Logic II MOVIE/MUSIC
Dolby Pro Logic II produces five full-bandwidth
output channels from 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
All sound field
Sound field
Display
AUTO FORMAT DIRECT A.F.D. STD
STANDARD
AUTO FORMAT DIRECT A.F.D. MULTI
MULTI
Note
• When the input signal is multi channel source, Dolby
Pro Logic and Dolby Pro Logic II MOVIE/MUSIC
are canceled and the multi channel source is output
directly.
Dolby Pro Logic
PRO LOGIC
Dolby Pro Logic II MOVIE PLII MOVIE
Dolby Pro Logic II MUSIC PLII MUSIC
• When the bilingual broadcast sound is input, Dolby
Pro Logic and Dolby Pro Logic II MOVIE/MUSIC
are not effective.
2 CHANNEL STEREO
2CH STEREO
HP 2CH
HEADPHONE
2 CHANNEL STEREO
HEADPHONE VIRTUAL
HP VIRTUAL
continued
33GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using only the front speaker
and subwoofer
x 2 CHANNEL STEREO
This mode outputs the sound from the front left
and right speakers and subwoofer. Standard 2
channel (stereo) sources completely bypass the
sound field processing. Multi channel surround
formats are downmixed to two channels.
This allows you to play any source using only
the front left and right speakers and subwoofer.
Enjoying the surround sound
by headphones
x HEADPHONE 2 CHANNEL STEREO
This mode outputs the sound from headphone L/
R. Standard 2 channel (stereo) sources
completely bypass the sound field processing.
Multi channel surround formats are downmixed
to two channels.
x HEADPHONE VIRTUAL
This mode outputs the sound as surround from
headphone L/R. This mode is effective only
when a multi channel source is played.
To turn the surround effect off
Press SOUND FIELD repeatedly until “A.F.D.
STD” or “2CH STEREO” appears in the front
panel display.
34GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Opposite direction
× 2b t 1m t 2m t 3m
Various Functions for Playing Discs
Searching for a Particular
Point on a Disc
3m (DVD VIDEO/DVD-VR mode/DivX video*/
VIDEO CD only)
× 2b (DVD VIDEO only)
(Scan, Slow-motion Play, Freeze
Frame)
* Except for North American models.
With each press, playback speed becomes faster.
Note
• In the case of Latin American models, the Scan
function does not work for CD Graphics.
You can quickly locate a particular point on a
disc by monitoring the picture or playing back
slowly.
Watching frame by frame
(Slow-motion Play)
(DVD VIDEO, DVD-R, DVD-RW, DivX
Note
• Depending on the DVD/DivX video*/VIDEO CD,
you may not be able to do some of the operations
described.
video*, VIDEO CD only)
* Except for North American models.
* Except for North American models.
Press /m or M/ when the system is in
pause mode. To return to the normal playback
speed, press H. Each time you press /mor
M/ during Slow-motion Play, the playback
speed changes. Two speeds are available. With
each press the indication changes as follows:
Locating a point quickly by
playing a disc in fast forward
or fast reverse (Scan)
(except for JPEG)
Playback direction
Press /m or M/ while playing a disc.
When you find the point you want, press H to
2
y 1
Opposite direction (DVD VIDEO only)
y 1
return to normal speed. Each time you press
m or M/ during scan, the playback speed
changes. With each press the indication changes
as shown below. Actual speeds may differ with
some discs.
/
2
Playing one frame at a time
(Freeze Frame)
(except for CD, MP3, and JPEG)
Playback direction
When the system is in the pause mode, press
(step) to go to the next frame. Press
× 2B t 1M t 2M t 3M
(step) to go to the preceding frame
(DVD VIDEO/DVD-R/DVD-RW only). To
return to normal playback, press H.
3M (DVD VIDEO/DVD-VR mode/DivX video*/
VIDEO CD only)
× 2B (DVD VIDEO/CD only)
Note
* Except for North American models.
• You cannot search for a still picture on a DVD-R/
DVD-RW in VR mode.
• For DATA CDs/DATA DVDs, this function works
only for DivX video files. (except for North
American models)
35GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press ENTER.
[** (**)] changes to [– – (**)].
Searching for a Title/
Chapter/Track/Scene,
etc.
(
)
)
1 2 2 7
(
3 4
DVD VIDEO
T
1 : 3 2 : 5 5
You can search a DVD by title or chapter, and
you can search a VIDEO CD/CD/DATA CD/
DATA DVD by track, index, or scene. As titles
and tracks are assigned unique numbers on the
disc, you can select the desired one by entering
its number. Or, you can search for a scene using
the time code.
4
5
Press X/x or the number buttons to
select the title, chapter, track, index,
scene, etc., number you want to search
for.
If you make a mistake
Cancel the number by pressing CLEAR,
then select another number.
1
Press
DATA CD/DATA DVD with JPEG image
files, press DISPLAY twice.)
DISPLAY. (When playing a
Press ENTER.
The Control Menu appears.
The system starts playback from the
selected number.
2
Press X/x to select the search method.
The display will show different items
depending on the disc.
To search for a scene using the
time code (DVD VIDEO and
DVD-VR mode only)
[TITLE], [TRACK], [SCENE]
[CHAPTER], [INDEX]
[TIME/TEXT]
1 In Step 2, select
[TIME/TEXT].
[T **:**:**] (playing time of the current title)
is selected.
Select [TIME/TEXT] to search for a
starting point by inputting the time code.
2 Press ENTER.
[TRACK]
[ALBUM]
[FILE]
[T **:**:**] changes to [T --:--:--].
3 Input the time code using the number
buttons, then press ENTER.
For example, to find the scene at 2 hours, 10
minutes, and 20 seconds after the beginning,
just enter [2:10:20].
Example: when you select
[CHAPTER]
[** (**)] is selected (** refers to a number).
The number in parentheses indicates the
total number of titles, chapters, tracks,
indexes, scenes, albums or files.
Tip
• When the Control Menu display is turned off, you can
search for a chapter (DVD VIDEO/DVD-R/DVD-
RW), track (VIDEO CD/CD), or file* (DATA CD/
DATA DVD (DivX video)) by pressing the number
buttons and ENTER.
(
(
)
)
1 2 2 7
1 8 3 4
DVD VIDEO
T
1 : 3 2 : 5 5
* Except for North American models.
Note
• You cannot search for a scene on a DVD+RW/
DVD+R using the time code.
Selected row
36GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching by Scene
(Picture Navigation)
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume Play)
You can divide the screen into 9 subscreens and
find the desired scene quickly.
1
2
3
Press PICTURE NAVI during playback.
The following display appears.
When you stop the disc, the system remembers
the point where you pressed x and “RESUME”
appears in the front panel display. As long as
you do not remove the disc, Resume Play will
work even if the system enters standby mode by
pressing "/1.
ENTER
CHAPTER VIEWER
Press PICTURE NAVI repeatedly to
select an item.
1
While playing a disc, press x to stop
playback.
• [TITLE VIEWER] (DVD VIDEO only)
• [CHAPTER VIEWER] (DVD VIDEO
only)
• [TRACK VIEWER] (VIDEO CD/
Super VCD only)
“RESUME” appears in the front panel
display.
If “RESUME” does not appear, Resume
Play is not available.
2
Press H.
Press ENTER.
The system starts playback from the point
where you stopped the disc in Step 1.
The first scene of each title, chapter, or
track appears as follows.
Note
• Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
1
4
7
2
5
8
3
6
9
• The point where you stopped playing may be cleared
when:
– you eject the disc.
– the system enters standby mode (DATA CD/
DATA DVD only).
– you change or reset the settings on the Setup
Display.
4
Press C/X/x/c to select a title, chapter,
or track, and press ENTER.
– you change the function by pressing FUNCTION.
– you disconnect the AC power cord (mains lead).
• For DVD-Rs/DVD-RWs in VR mode, VIDEO CDs,
CDs, DATA CDs, and DATA DVDs, the system
remembers the resume playback point for the current
disc.
Playback starts from the selected scene.
To return to normal play during
setting
Press O RETURN or
DISPLAY.
• The resume point is cleared when:
– you select another disc.
Note
• Depending on the disc, you may not be able to select
some items.
• Resume Play does not work during Program Play and
Shuffle Play.
• This function may not work properly with some
discs.
continued
37GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• When using the Resume function on CD Graphics
(Latin American models only), playback starts from
the beginning of the track.
Creating Your Own
Program
Tip
• To play from the beginning of the disc, press xtwice,
then press H.
(Program Play)
To enjoy a disc that is played
before by resume playback
(Multi-disc Resume)
You can play the contents of a disc in the order
you want by arranging the order of the tracks on
the disc to create your own program. You can
program up to 99 tracks.
(DVD VIDEO, VIDEO CD only)
This system stores the point where you stopped
the disc for up to 40 discs and resumes playback
the next time you insert the same disc. If you
store a resume playback point for the 41st disc,
the resume playback point for the first disc is
deleted.
To activate this function, set [MULTI-DISC
RESUME] in [CUSTOM SETUP] to [ON]. For
Note
• You can program the track on the current disc only.
1
2
Press
DISPLAY.
The Control Menu appears.
Press X/x to select
[PROGRAM], then press ENTER.
The options for [PROGRAM] appear.
6 (14)
2 : 5 0
CD
T
Tip
OFF
OFF
SET
ON
• To play from the beginning of the disc, press xtwice,
then press H.
Note
• If [MULTI-DISC RESUME] in [CUSTOM SETUP]
when you change the function by pressing
FUNCTION.
3
Press X/x to select [SET t], then
press ENTER.
[TRACK] is displayed when you play a
VIDEO CD or CD.
PROGRAM
0:00:00
T
ALL CLEAR
1. TRACK
– –
– –
2. TRACK
3. TRACK
4. TRACK
5. TRACK
6. TRACK
7. TRACK
01
02
03
04
05
06
– –
– –
– –
– –
– –
Tracks recorded
on a disc
Total time of the
programmed tracks
4
Press c.
The cursor moves to the track row [T] (in
this case, [01]).
38GB
Download from Www.Somanuals.com. All Manuals Search And Download.
want to delete the track from the program,
press CLEAR.
PROGRAM
ALL CLEAR
0:00:00
T
– –
3 Follow Step 5 for new programming. To
cancel a program, select [--] under [T], then
press ENTER.
1. TRACK
– –
01
02
03
04
05
06
– –
– –
– –
– –
– –
– –
2. TRACK
3. TRACK
4. TRACK
5. TRACK
6. TRACK
7. TRACK
To cancel all of the tracks in the
programmed order
5
Select the track you want to program.
Program.”
For example, select track [02].
Press X/x to select [02] under [T], then
press ENTER.
2 Press X and select [ALL CLEAR].
3 Press ENTER.
Selected track
0:15:30
T
PROGRAM
ALL CLEAR
1. TRACK
2. TRACK
3. TRACK
4. TRACK
5. TRACK
6. TRACK
7. TRACK
– –
01
02
03
04
05
06
0 2
– –
– –
– –
– –
– –
– –
Total time of the programmed tracks
6
7
To program other tracks, repeat steps 4
to 5.
The programmed tracks are displayed in the
selected order.
Press H to start Program Play.
Program Play starts.
When the program ends, you can restart the
same program again by pressing H.
To return to normal play
Press CLEAR, or select [OFF] in Step 3. To play
the same program again, select [ON] in Step 3
and press ENTER.
To turn off the Control Menu
Press
DISPLAY repeatedly until the Control
Menu is turned off.
To change or cancel a program
2 Select the program number of the track you
want to change or cancel using X/x. If you
39GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To return to normal play
Playing in Random Order
Press CLEAR, or select [OFF] in Step 3.
(Shuffle Play)
To turn off the Control Menu
Press
DISPLAY repeatedly until the Control
Menu is turned off.
You can have the system “shuffle” tracks.
Subsequent “shuffling” may produce a different
playing order.
Note
• You cannot use this function with VIDEO CDs and
Super VCDs with PBC playback.
Note
• Same song may be played repeatedly during MP3
playback.
• You can shuffle the track on the current disc only.
1
2
Press
DISPLAY during playback.
The Control Menu appears.
Press X/x to select
then press ENTER.
[SHUFFLE],
The options for [SHUFFLE] appear.
6 (14)
2 : 5 0
CD
T
OFF
OFF
TRACK
3
Press X/x to select the item to be
shuffled.
x When playing a VIDEO CD or CD
• [TRACK]: shuffles tracks on the disc.
x When Program Play is activated
• [ON]: shuffles tracks selected in Program
Play.
x When playing a DATA CD (except for
DivX*) or DATA DVD (except for DivX*)
• [ON]: shuffles MP3 audio tracks in the
album on the current disc. When no album
is selected, the first album will play in
random order.
* Except for North American models.
Note
• A track already played is also selected in
random order.
4
Press ENTER.
Shuffle Play starts.
40GB
Download from Www.Somanuals.com. All Manuals Search And Download.
xWhen playing a DATA CD or DATA
DVD
• [OFF]: does not play repeatedly.
Playing Repeatedly
(Repeat Play)
• [ALL DISCS]: repeats all of the discs.
• [ONE DISC]: repeats all of the albums on
the current disc.
• [ALBUM]: repeats the current album.
• [TRACK] (MP3 audio tracks only):
repeats the current track.
• [FILE] (DivX video files only): repeats
the current file.*
You can play all the titles, tracks or albums on a
disc or a single title, chapter, track, or album
repeatedly.
You can use a combination of Shuffle or
Program Play modes.
* Except for North American models.
1
2
Press
DISPLAY during playback.
4
Press ENTER.
The Control Menu appears.
The item is selected.
To return to normal play, press CLEAR, or
select [OFF] in Step 3.
Press X/x to select
then press ENTER.
[REPEAT],
The options for [REPEAT] appear.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
6 (14)
2 : 5 0
CD
T
Note
OFF
OFF
• You cannot use this function with VIDEO CDs and
Super VCDs with PBC playback.
ALL DISCS
ONE DISC
TRACK
• When playing a DATA CD/DATA DVD which
contains MP3 audio track and JPEG image files, and
their playing time are not the same, the audio sound
will not match the image.
3
Press X/x to select the item to be
repeated.
• When [MODE (MP3, JPEG)] is set to [IMAGE
The default setting is underlined.
x When playing a DVD VIDEO or DVD-
VR
• [OFF]: does not play repeatedly.
• [ALL DISCS]: repeats all of the discs.
• [ONE DISC]: repeats all of the titles on
the current disc. (When playing a DVD-
VR, [ONE DISC] repeats all of the titles
of the selected type.)
• [TITLE]: repeats the current title on a
disc.
• [CHAPTER]: repeats the current chapter.
x When playing a VIDEO CD or CD
• [OFF]: does not play repeatedly.
• [ALL DISCS]: repeats all of the discs.
• [ONE DISC]: repeats all of the tracks on
the current disc.
• [TRACK]: repeats the current track.
41GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD’s Menu
Changing the Sound
A DVD is divided into a lot of sections, which
make up a picture or music feature. These
sections are called “titles.” When you play a
DVD which contains several titles, you can
select the title you want using TOP MENU.
When you play DVDs that allow you to select
items such as the language for the subtitles and
the language for the sound, select these items
using MENU.
When playing a DVD VIDEO or DATA CD/
DATA DVD (DivX video files*) recorded in
multiple audio formats (PCM, Dolby Digital,
MPEG audio, or DTS), you can change the
audio format. If the DVD VIDEO is recorded
with multilingual tracks, you can also change the
language.
With VIDEO CDs, CDs, DATA CDs, or DATA
DVDs, you can select the sound from the right or
left channel and listen to the sound of the
selected channel through both the right and left
speakers.
1
Press TOP MENU or MENU.
The disc’s menu appears on the TV screen.
The contents of the menu vary from disc to
disc.
* Except for North American models.
2
3
Press C/X/x/c or the number buttons to
select the item you want to play or
change.
1
Press AUDIO during playback.
The following display appears.
Press ENTER.
:
1
ENGLISH DOLBY DIGITAL 3/2.1
2
Press AUDIO repeatedly to select the
desired audio signal.
xWhen playing a DVD VIDEO
Depending on the DVD VIDEO, the choice
of language varies.
When 4 digits are displayed, they indicate a
language code. Refer to “Language Code
List” (page 90) to see which language the
code represents. When the same language is
displayed two or more times, the DVD
VIDEO is recorded in multiple audio
formats.
xWhen playing a DVD-VR
The types of sound tracks recorded on a disc
are displayed. The default setting is
underlined.
Example:
• [1: MAIN] (main sound)
• [1: SUB] (sub sound)
• [1: MAIN+SUB] (main and sub sound)
• [2: MAIN]
42GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• [2: SUB]
• [2: MAIN+SUB]
Checking the audio signal
format
(DVD, DivX video* only)
Note
• [2: MAIN], [2: SUB], and [2: MAIN+SUB] do
not appear when one audio stream is recorded on
the disc.
* Except for North American models.
If you press AUDIO repeatedly during
playback, the format of the current audio signal
(PCM, Dolby Digital, DTS, etc.) appears as
shown below.
x When playing a VIDEO CD, CD, DATA
CD (MP3 audio), or DATA DVD (MP3
audio)
The default setting is underlined.
x When playing a DVD
• [STEREO]: the standard stereo sound
• [1/L]: the sound of the left channel
(monaural)
Example:
Dolby Digital 5.1 ch
• [2/R]: the sound of the right channel
(monaural)
LFE (Low
Frequency Effect)
Surround (L/R)
:
x When playing a DATA CD (DivX
video) or DATA DVD (DivX video)
(except for North American models)
The choice of DATA CD or DATA DVD
audio signal formats differ, depending on
the DivX video file contained on the disc.
The format is shown in the display.
3 / 2 .1
ENGLISH DOLBY DIGITAL
1
L
C
R
Front (L/R) +
Center
LFE
LS
RS
Currently playing
program format
x When playing a Super VCD
The default setting is underlined.
• [1:STEREO]: the stereo sound of the
audio track 1
Example:
Dolby Digital 3 ch
• [1:1/L]: the sound of the left channel of
the audio track 1 (monaural)
• [1:2/R]: the sound of the right channel of
the audio track 1 (monaural)
• [2:STEREO]: the stereo sound of the
audio track 2
Surround
(Monaural)
Front (L/R)
:
2 / 1
2 SPANISH DOLBY DIGITAL
L
R
• [2:1/L]: the sound of the left channel of
the audio track 2 (monaural)
S
• [2:2/R]: the sound of the right channel of
the audio track 2 (monaural)
Currently playing
program format
Note
x When playing a DATA CD (DivX video) or
DATA DVD (DivX video) (except for North
American models)
• While playing a Super VCD on which the audio track
2 is not recorded, no sound will come out when you
select [2:STEREO], [2:1/L], or [2:2/R].
Example:
MP3 audio
1: MP3 128k
Bit rate
continued
43GB
Download from Www.Somanuals.com. All Manuals Search And Download.
About audio signals
Selecting [ORIGINAL] or
[PLAY LIST] on a DVD-R/
DVD-RW
Audio signals recorded in a disc contain the
sound elements (channels) shown below. Each
channel is output from a separate speaker.
• Front (L)
• Front (R)
• Center
• Surround (L)
• Surround (R)
• Surround (Monaural): This signal can be either
the Dolby Surround Sound processed signals
or the Dolby Digital sound’s monaural
Surround audio signals.
Some DVD-Rs/DVD-RWs in VR (Video
Recording) mode have two types of titles for
playback: originally recorded titles
([ORIGINAL]) and titles that can be created on
recordable DVD players for editing ([PLAY
LIST]). You can select the type of title to be
played.
• LFE (Low Frequency Effect) signal
1
Press
in stop mode.
DISPLAY when the system is
The Control Menu appears.
2
Press X/x to select
PLAY LIST], then press ENTER.
[ORIGINAL/
The options for [ORIGINAL/PLAY LIST]
appear.
(
3
)
1
T
4 4
(
)
2 8
1 : 3 0 : 5 0
DVD-VR
PLAY LIST
PLAY LIST
ORIGINAL
3
4
Press X/x to select a setting.
The default setting is underlined.
• [PLAY LIST]: plays the titles created
from [ORIGINAL] for editing.
• [ORIGINAL]: plays the titles originally
recorded.
Press ENTER.
44GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Track and index*
* VIDEO CD only.
ViewingInformationAbout
the Disc
When playing a DATA CD (MP3
audio) or DATA DVD (MP3 audio)
1 Playing time and current track number
2 Track (file) name
Tip
• When playing VIDEO CDs with PBC functions, the
playing time is displayed.
Viewing the playing time and
remaining time in the front
panel display
Note
• The system can only display the first level of the
DVD/CD text, such as the Disc name or title.
• If an MP3 file name cannot be displayed, “*” will
appear in the front panel display instead.
• The disc name or track name may not be displayed
depending on the text.
You can check disc information, such as the
remaining time, total number of titles in a DVD,
tracks in a VIDEO CD, CD, or MP3, file name
of a DivX video* using the front panel display
• Playing time of MP3 audio tracks and DivX video
files* may not be displayed correctly.
* Except for North American models.
* Except for North American models.
Press DISPLAY.
Each time you press DISPLAY while playing
the disc, the display changes 1 t 2 t ...
t 1 t ...
Some displayed items may disappear after a few
seconds.
Checking the playing time and
remaining time
You can check the playing time and remaining
time of the current title, chapter, or track, and the
total playing time or remaining time of the disc.
You can also check the DVD text and MP3
folder name/file name recorded on the disc.
When playing a DVD VIDEO or
DVD-R/DVD-RW
1 Playing time and number of the current title
2 Remaining time of the current title
3 Playing time and number of the current
chapter
1
Press DISPLAY during playback.
The following display appears.
4 Remaining time of the current chapter
5 Disc name
6 Title and chapter
T
1:01:57
Time information
When playing a DATA CD (DivX
video) or DATA DVD (DivX video)
(except for North American models)
2
Press DISPLAY repeatedly to change
the time information.
1 Playing time of the current file
2 Current file name
3 Current album and file number
The display and the kinds of time that you
can check depend on the disc you are
playing.
When playing a VIDEO CD
(without PBC functions) or CD
xWhen playing a DVD VIDEO or DVD-
RW
• T **:**:**
Playing time of the current title
• T–**:**:**
Remaining time of the current title
1 Playing time of the current track
2 Remaining time of the current track
3 Playing time of the disc
4 Remaining time of the disc
5 Disc name
continued
45GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• C **:**:**
Playing time of the current chapter
• C–**:**:**
Checking the play information
of the disc
Remaining time of the current chapter
To check DVD/CD text
x When playing a VIDEO CD (with PBC
functions)
Press DISPLAY repeatedly in Step 2 to display
text recorded on the DVD/CD.
The DVD/CD text appears only when text is
recorded in the disc. You cannot change the text.
If the disc does not contain text, “NO TEXT”
appears.
• **:**
Playing time of the current scene
x When playing a VIDEO CD (without
PBC functions) or CD
• T **:**
Playing time of the current track
• T–**:**
Remaining time of the current track
• D **:**
BRAHMS SYMPHONY
Playing time of the current disc
• D–**:**
To check DATA CD/DATA DVD
Remaining time of the current disc
(MP3 audio/DivX video*) text
By pressing DISPLAY while playing MP3
audio tracks on a DATA CD/DATA DVD or
DivX video files* on a DATA CD/DATA DVD,
you can display the name of the album/track/file,
and the audio bit rate (the amount of data per
second of the current audio) on your TV screen.
x When playing a DATA CD (MP3
audio) or DATA DVD (MP3 audio)
• T **:**
Playing time of the current track
x When playing a DATA CD (DivX
video) or DATA DVD (DivX video)
(except for North American models)
• **:**:**
Bit rate**
Playing time of the current file
T
17:30 128k
Note
• Only alphabetical letters and numbers can be
displayed.
• Depending on the type of disc being played, the
system can only display a limited number of
characters. Also, depending on the disc, not all text
characters will be displayed.
JAZZ
RIVER SIDE
Album name
Track/file* name
* Except for North American models.
**Appears when:
– playing an MP3 audio track on DATA CDs/DATA
DVDs.
– playing a DivX video file that contains MP3 audio
signals on DATA CDs/DATA DVDs (except for
North American models).
46GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the date
information
Changing the Angles
(JPEG only)
You can check the date information during
playback when the Exif* tag is recorded in the
JPEG image data.
If various angles (multi-angles) for a scene are
recorded on a DVD VIDEO, you can change the
viewing angle.
Press
DISPLAY twice during playback.
Press ANGLE during playback.
The Control Menu appears.
Each time you press ANGLE, the angle changes.
(
(
)
1
1
8
Note
)
2 0
DATA CD JPEG
• Depending on the DVD VIDEO, you may not be able
to change the angle even if multi-angles are recorded
on the DVD VIDEO.
01/ 01/ 2006
Date information
* “Exchangeable Image File Format” is a digital
camera image format defined by the Japan
Electronics and Information Technology Industries
Association (JEITA).
Tip
• Date information is [MM/DD/YYYY].
MM: Month
DD: Day
YYYY: Year
• Date information differs depending on the area.
47GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the Subtitles
Adjusting the Delay
Between the Picture and
Sound
*
*
* Except for North American models.
If subtitles are recorded on a disc, you can turn
the subtitles on or off while playing. If
multilingual subtitles are recorded on the disc,
you can change the subtitle language while
playing, or turn the subtitles on or off whenever
you want.
(A/V SYNC)
*
*
* Except for North American models.
When the sound does not match the pictures on
the screen, you can adjust the delay between the
picture and sound.
Press SUBTITLE during playback.
Each time you press SUBTITLE, the subtitle
language changes.
1
Press
in stop mode.
DISPLAY when the system is
Note
The Control Menu appears.
• Depending on the DVD VIDEO, you may not be able
to change the subtitles even if multilingual subtitles
are recorded on it. You also may not be able to turn
them off.
2
Press X/x to select
then press ENTER.
[A/V SYNC],
The options for [A/V SYNC] appear.
• You can change the subtitles if the DivX video file
has an “.AVI” or “.DIVX” extension and contains
subtitle information within the same file. (except for
North American models)
(
(
)
)
1
1
T
1 2
2 8
DVD VIDEO
0 : 0 0 : 0 2
OFF
OFF
ON
3
Press X/x to select the setting you
want and press ENTER.
The default setting is underlined.
• [OFF]: does not adjust.
• [ON]: adjusts the difference between
picture and sound.
The selected setting takes effect.
Note
• Depending on the input stream, this function may not
be effective.
48GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• which have the extension “.MP3” (MP3 audio
track) or “.JPG”/“.JPEG” (JPEG image file)
About MP3 Audio Tracks
and JPEG Image Files
• which conform to the DCF* image file format
* “Design rule for Camera File system”: Image
standards for digital cameras regulated by Japan
Electronics and Information Technology Industries
Association (JEITA).
Note
What is MP3/JPEG?
• The system will play any data with the
extension “.MP3,” “.JPG,” or “.JPEG” even if
they are not in MP3 or JPEG format. Playing
this data may generate a loud noise which
could damage your speaker system.
• The system does not conform to audio in
MP3PRO format.
MP3 is audio compression technology that
satisfies the ISO/MPEG regulations. JPEG is
image compression technology.
Discs that the system can
play
You can play back DATA CDs (CD-ROMs/CD-
Rs/CD-RWs) or DATA DVDs (DVD-Rs/DVD-
RWs/DVD+Rs/DVD+RWs/DVD-ROMs)
recorded in MP3 (MPEG1 Audio Layer 3) or
JPEG format. However, the DATA CDs must be
recorded according to ISO 9660 Level 1, Level
2 or Joliet format and DATA DVDs of Universal
Disk Format (UDF) for the system to recognize
the tracks (or files). You can also play discs
recorded in Multi Session.
Playback order of MP3 audio
tracks or JPEG image files
The playback order of MP3 audio tracks or
JPEG image files recorded on a DATA CD or
DATA DVD is as follows:
x Structure of disc contents
Tree 1
ROOT
Tree 2
Tree 3
Tree 4
Tree 5
See the instructions supplied with the CD-R/
CD-RW or DVD-R/DVD-RW drives and the
recording software (not supplied) for details on
the recording format.
About the Multi-Session disc
If MP3 audio tracks or JPEG image files are
recorded in the first session, the system will also
play MP3 audio tracks or JPEG image files in
other sessions. If audio tracks and images in
audio CD format or video CD format are
recorded in the first session, only the first
session will be played back.
Note
• The system may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
format.
MP3 audio track or JPEG
image file that the system can
play
Track (MP3 audio) or
File (JPEG image)
Album
The system can play the MP3 audio tracks or
JPEG image files:
continued
49GB
Download from Www.Somanuals.com. All Manuals Search And Download.
When you insert a DATA CD or DATA DVD
and press H, the numbered tracks (or files) are
played sequentially, from 1 through 7. Any
sub-albums/tracks (or files) contained within a
currently selected album take priority over the
next album in the same tree. (Example: C
contains D so 4 is played before 5.)
Playing DATA CDs or
DATA DVDs with MP3
Audio Tracks and JPEG
Image Files
When you press MENU and the list of album
arranged in the following order:
A t B t C t D t F t G. Albums
that do not contain tracks (or files) (such as
album E) do not appear in the list.
Selecting an MP3 audio track
or album
1
Load a DATA CD or DATA DVD.
Tip
The albums recorded on the DATA CD or
DATA DVD appear. When an album is
being played, its title is shaded.
• If you add numbers (01, 02, 03, etc.) to the front of the
track (or file) names when you store the tracks (or
files) in a disc, the tracks (or files) will be played in
that order.
• A disc with many trees takes longer to start playback.
(
)
3
3 0
Note
R O C K B E S T H I T
K A R A O K E
M Y F A V O U R I T E S O N G
R & B
J A Z Z
C L A S S I C
S A L S A O F C U B A
B O S S A N O V A
• Playback order may differ from the illustration
depending on the software you use to create the
DATA CD or DATA DVD, or if there are more than
200 albums and 300 files in each album.
• The system can recognize up to 200 albums, and will
not play any albums beyond the 200th.
• The system may take longer time to playback, when
progressing to the following album or jump to other
album.
2
Press X/x to select an album.
xWhen selecting an album
Press H to start playing the selected
album.
• Some type of JPEG files cannot be played.
xWhen selecting a track
Press ENTER.
The list of tracks contained in the album
appears.
M Y F A V O U R I T E S O N G
(
)
1
2 5 6
W A L T Z F O R D E B B Y
M Y R O M A N C E
M I L E S T O N E S
M Y F U N N Y V A L E N T I N E
A U T U M L E A V E S
A L L B L U E S
S O M E D A Y M Y P R I N C E W...
Press X/x to select a track and press
ENTER.
The selected track starts playing. You can
turn the track list off by pressing MENU.
50GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Pressing MENU again will display the
album list.
1
2
3
4
To stop playback
5
6
7
8
Press x.
To play the next or previous MP3
audio track
9
10
14
11
15
12
16
13
Press ./>. Note that you can select the
next album by continuing to press > after the
last track on the current album, but that you
cannot return to the previous album by pressing
.. To return to the previous album, select the
album from the album list.
Press C/X/x/c to select the image you want
to view and press ENTER.
To return to the previous display
Press O RETURN.
To turn off the display
Press MENU.
To play the next or previous JPEG
image file
Selecting a JPEG image file or
album
Press C/c when the Control Menu is not
displayed. Note that you can select the next
album by continuing to press c after the last
image on the current album, but that you cannot
return to the previous album by pressing C. To
return to the previous album, select the album
from the album list.
1
2
Load a DATA CD or DATA DVD.
The albums recorded on the DATA CD or
DATA DVD appear. When an album is
being played, its title is shaded.
(
)
3
3 0
R O C K B E S T H I T
K A R A O K E
M Y F A V O U R I T E S O N G
R & B
J A Z Z
C L A S S I C
S A L S A O F C U B A
B O S S A N O V A
To rotate a JPEG image
When a JPEG image file is displayed on the
screen, you can rotate the image by 90 degrees.
Press X/x while viewing an image. Each time
you press X, the image rotates counterclockwise
by 90 degrees.
Example of when you press X once:
Press X/x to select an album.
Rotating direction
x When selecting an album
Press H to start playing the selected
album.
x When selecting an image
Press PICTURE NAVI.
Images of files in the album appear in 16
subscreens.
continued
51GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CLEAR to return to normal view.
Playing Audio Tracks and
Images as a Slide Show
with Sound
To stop playback
Press x.
Tip
• A scroll box is displayed at the right side of the
screen. To display the additional image files, select
the bottom image and press x. To return to the
previous image, select the top image and press X.
You can play a slide show with sound by first
placing both MP3 and JPEG files in the same
album on a DATA CD or DATA DVD. When
you play back the DATA CD or DATA DVD,
select [AUTO] mode as explained below.
1
2
Load a DATA CD or DATA DVD.
Press DISPLAY when the system is
in stop mode.
The Control Menu appears.
3
Press X/x to select
(MP3, JPEG)], then press ENTER.
[MODE
The options for [MODE (MP3, JPEG)]
appear.
(
)
)
1 2 2 7
(
1 8 3 4
DATA CD MP3
T
1 : 3 2 : 5 5
AUTO
AUTO
AUDIO (MP3)
IMAGE (JPEG)
4
Press X/x to select the setting you
want and press ENTER.
The default setting is underlined.
• [AUTO]: plays both the JPEG image files
and MP3 audio tracks in the same album
as a slide show.
• [AUDIO (MP3)]: plays only MP3 audio
tracks continuously.
• [IMAGE (JPEG)]: plays only JPEG
image files as a slide show.
5
6
Press MENU.
The list of albums recorded on the DATA
CD or DATA DVD appears.
Press X/x to select the album you want
and press H.
The system starts playing the selected
album.
52GB
Download from Www.Somanuals.com. All Manuals Search And Download.
You can turn the album list on and off by
pressing MENU repeatedly.
• [NORMAL]: sets the duration to about 6
to 9 seconds. (Images that are four million
pixels or more will lengthen the duration.)
• [FAST]: sets the duration shorter than
[NORMAL].
• [SLOW1]: Sets the duration longer than
[NORMAL].
• [SLOW2]: Sets the duration longer than
[SLOW1].
Tip
• When you select [AUTO], the system can recognize
up to 300 MP3 tracks and 300 JPEG files in a single
album. When you select [AUDIO (MP3)] or [IMAGE
(JPEG)], the system can recognize up to 600 MP3 and
600 JPEG files in a single album. A maximum of 200
albums can be recognized regardless of the selected
mode.
4
Press ENTER.
Note
The selected setting takes effect.
• If you set [MODE (MP3, JPEG)] to [IMAGE
(JPEG)] on a disc that contains MP3 tracks only or
[AUDIO (MP3)] on a disc that contains JPEG files
only, you may not be able to change the [MODE
(MP3, JPEG)] setting.
Note
• Some JPEG files may take longer to display than
others, which may make the duration seems longer
than the option you selected. Especially progressive
JPEG files or JPEG files of 3,000,000 pixels or more.
• PICTURE NAVI does not work when [AUDIO
(MP3)] is selected.
• If you play large MP3 track data and JPEG image
data at the same time, the sound may skip. It is
recommended that you set the MP3 bit rate to 128
kbps or lower when creating the file. If the sound still
skips, then reduce the size of the JPEG file.
Selecting an effect for image
files in the slide show
(JPEG only)
When you play a JPEG image file, you can
select the effect to be used when viewing the
slide show.
Specifying the slide show
duration
(JPEG only)
1
2
Press
DISPLAY twice.
The Control Menu for JPEG appears.
When you play JPEG image files using slide
show, you can specify the duration for slides to
appear on the screen.
Press X/x to select
then press ENTER.
[EFFECT],
The options for [EFFECT] appear.
1
2
Press
DISPLAY twice.
3 ( 12)
The Control Menu for JPEG appears.
1(
4)
DATA CD JPEG
1 0 / 2 3 / 2 0 0 4
Press X/x to select
[INTERVAL], then press ENTER.
MODE1
MODE1
MODE2
MODE3
MODE4
MODE5
OFF
The options for [INTERVAL] appear.
3 ( 12)
1(
4)
DATA CD JPEG
10 / 29 / 2 004
NORMAL
NORMAL
FAST
SLOW1
SLOW2
3
Press X/x to select the setting you
want.
The default setting is underlined.
• [MODE1]: The image sweeps in from top
to bottom.
• [MODE2]: The image stretches out from
left to right of the screen.
3
Press X/x to select the setting you
want.
The default setting is underlined.
• [MODE3]: The image stretches out from
the center of the screen.
continued
53GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• [MODE4]: The images randomly cycle
through the effects.
• [MODE5]: The next image slides over the
previous image.
Enjoying DivX® Videos
• [OFF]: Turns off this function.
(Except for North American models)
4
Press ENTER.
The selected setting takes effect.
About DivX Video Files
®
DivX is a video file compression technology,
developed by DivX, Inc. This product is an
®
official DivX Certified product.
You can play DATA CDs and DATA DVDs that
®
contain DivX video files.
DATA CDs and DATA DVDs that
the system can play
Playback of DATA CDs (CD-ROMs/CD-Rs/
CD-RWs) and DATA DVDs (DVD-ROMs/
DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs) on
this system is subject to certain conditions:
– With DATA CDs/DATA DVDs that contain
DivX video files in addition to MP3 audio
tracks or JPEG image files, the system plays
only the DivX video files.
However, this system only plays DATA CDs
whose logical format is ISO 9660 Level 1/Level
2 or Joliet, and DATA DVDs of Universal Disk
Format (UDF).
Refer to the instructions supplied with the disc
drives and the recording software (not supplied)
for details on the recording format.
About playback order of data on
DATA CDs or DATA DVDs
JPEG image files” (page 49). Note that the
playback order may not be applicable,
depending on the software used for creating the
DivX video file, or if there are more than 200
albums and 600 DivX video files in each album.
Note
• The system may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
format.
DivX video files that the system
can play
The system can play data that is recorded in
DivX format, and which has the extension
“.AVI,” or “.DIVX.” The system will not play
54GB
Download from Www.Somanuals.com. All Manuals Search And Download.
files with the extension “.AVI” or “.DIVX” if
they do not contain a DivX video.
To go to the next or previous
page
Press C/c.
Tip
• For details about playable MP3 audio tracks or JPEG
image files on DATA CDs or DATA DVDs, see
To turn off the display
Press MENU repeatedly.
Note
To stop playback
• The system may not play a DivX video file when the
file has been combined from two or more DivX video
files.
Press x.
• The system cannot play a DivX video file of size
more than 720 (width) × 576 (height) or 2GB.
• Depending on the DivX video file, sound may skip or
not match the pictures on the screen.
Selecting a DivX video file
1
press ENTER.
• The system cannot play some DivX video files that
are longer than 3 hours.
The list of files in the album appears.
• Depending on the DivX video file, the picture may
pause or be unclear. In which case, it is recommended
that you create the file at a lower bit rate. If the sound
is still noisy, MP3 is the recommended audio format.
Note, however, this system does not conform to
WMA (Windows Media Audio) format.
• Because of the compression technology used for
DivX video files, it may take some time after you
press H for the picture to appear.
M Y F A V O U R I T E S
(
)
1
2
H A W A I I 2 0 0 4
V E N U S
2
Press X/x to select a file and press
ENTER.
Selecting an album
1
Press MENU.
The selected file starts playing.
A list of albums on the disc appears. Only
albums that contain DivX video files are
listed.
To go to the next or previous
page
Press C/c.
(
)
3
3
To return to the previous display
S U M M E R 2 0 0 3
N E W Y E A R ' S D A Y
M Y F A V O U R I T E S
Press O RETURN.
To stop playback
Press x.
To play the next or previous DivX
video file without turning on the
above file list
2
3
Press X/x to select the album you want
to play.
You can select the next or previous DivX video
file in the same album by pressing ./>.
You can also select the first file of the next
album by pressing > during playback of the
last file of the current album. Note that you
cannot return to the previous album by pressing
.. To return to the previous album, select it
from the album list.
Press H.
The system starts playing the selected
album.
To select DivX video files, see “Selecting a
continued
55GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
• If the number of viewing times is preset, you can play
the DivX video files as many times as the preset
number. The following occurrences are counted:
Playing VIDEO CDs with
PBC Functions (Ver.2.0)
(PBC Playback)
– when the system is turned off.
– when another file is played.
– when the disc tray is opened.
With PBC (Playback Control) functions, you
can enjoy simple interactive operations, search
functions, and other such operations.
PBC playback allows you to play VIDEO CDs
interactively by following the menu on the TV
screen.
1
Start playing a VIDEO CD with PBC
functions.
The menu for your selection appears.
2
Select the item number you want by the
number buttons.
3
4
Press ENTER.
Follow the instructions in the menu for
interactive operations.
Refer to the operation details supplied with
the disc, as the operating procedure may
differ depending on the VIDEO CD.
To go back to the menu
Press O RETURN.
Note
• Depending on the VIDEO CD, [Press ENTER] in
Step 3 may appear as [Press SELECT] in the
instructions supplied with the disc. In this case, press
H.
Tip
• To play without using PBC, press ./> or the
number buttons while the system is stopped to select
a track, then press H or ENTER. The system starts
continuous play. You cannot play still pictures such
as a menu. To return to PBC playback, press x twice,
then press H.
56GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the AM tuning interval
(except for Russian and Middle
Eastern models)
Tuner Functions
The AM tuning interval can be set to either
10 kHz or 9 kHz.
Presetting Radio Stations
To change the AM tuning interval, first tune in
any AM station, then turn off the system by
pressing "/1on the system. While holding down
> (on the system), press "/1 on the system to
turn on the power. If you change the interval,
AM preset stations will be erased.
You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down
the volume to minimum.
1
Press FUNCTION repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
To reset the interval, repeat the same procedure.
2
Press and hold TUNING + or – until the
auto scanning starts.
Scanning stops when the system tunes in a
station. “TUNED” and “ST” (for stereo
program) appear in the front panel display.
3
4
Press MENU.
Press X/x repeatedly until “MEMORY”
appears in the front panel display.
5
Press ENTER.
A preset number appears in the front panel
display.
6
7
8
Press X/x to select the preset number
you want.
Press ENTER.
The station is stored.
Repeat 1 to 7 to store other stations.
To change the preset number
Restart from Step 1.
57GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Naming preset stations
Listening to the Radio
You can enter a name for preset stations. These
names (for example, “XYZ”) appear in the
system’s front panel display when a station is
selected.
Preset radio stations in the system’s memory
Note that no more than one name can be entered
for each preset station.
1
2
3
Press FUNCTION repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
1
Press FUNCTION repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
The last received station is tuned in.
Press PRESET + or – repeatedly to
select the preset station you want.
The last received station is tuned in.
Each time you press the button, the system
tunes in one preset station.
2
Press PRESET + or – repeatedly to
select the preset station you want to
create an index name for.
Adjust the volume by pressing
VOLUME +/–.
3
4
Press MENU.
Press X/x repeatedly until “NAME IN”
appears in the front panel display.
To turn off the radio
Press "/1.
To listen to non-preset radio
stations
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING + or –
repeatedly.
For automatic tuning, press and hold TUNING +
or –. The automatic tuning stops automatically
when the system receives the radio station. To
stop the automatic tuning manually, press
TUNING + or –.
5
6
Press ENTER.
Create a name by using the cursor
buttons.
Press X/x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station name.
If you make a mistake
To listen to radio stations when
you know the frequencies
Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character.
To erase the character, press C/c
repeatedly until the character to be erased
flashes, then press CLEAR.
Use direct tuning in Step 2.
1 Press D.TUNING.
2 Press the number buttons to select the
frequency number you want to listen to.
3 Press ENTER.
7
Press ENTER.
“COMPLETE” appears in the front panel
display, and the station name is stored.
Tip
• If an FM program is noisy, press MENU, and select
“FM MODE” by pressing X/x, then press ENTER.
Press X/x to select “MONO,” then press ENTER.
There will be no stereo effect, but the reception will
improve. To restore the stereo effect, select
“STEREO.”
Tip
• You can check the frequency by pressing DISPLAY
• To improve reception, reorient the supplied antennas
(aerials).
58GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the station name or
frequency in the front panel
display
When the system is set to “TUNER AM” or
“TUNER FM,” you can check the frequency
using the front panel display.
Press DISPLAY.
Each time you press DISPLAY, the display
changes as shown.
1 Station name*
2 Frequency**
* This is displayed if you have entered a name for a
preset station.
**Returns to the original display when several seconds
has elapsed.
59GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the THEATRE SYNC
Function
Other Operations
Controlling the TV with the
Supplied Remote
THEATRE SYNC allows you to turn on your
SONY TV and this system, changes the system
mode to “DVD,” and then switches the TV’s
input source you set with one button push.
You can control your TV (SONY only) with the
supplied remote.
Preparing for the THEATRE
SYNC function
Controlling TVs with the
remote
Register the TV’s input source connected to this
system.
To control the TV
You can control the TV by using following
buttons.
Press and hold TV/VIDEO while entering
the code for the TV’s input source
connected to this system (see the table)
using the number buttons.
By pressing
TV [/1
You can
Turn the TV on or off.
The TV’s input source is selected.
Set your TV’s input to the input you used to
connect the system. For details, see the
instructions of your TV.
TV/VIDEO
Switch the TV’s input source
between the TV and other input
sources.
TV VOL +/–
TV CH +/–
Adjust the TV volume.
Select the TV channel.
By pressing Number
TV’s input source
TV/VIDEO
0
No input source
(Default)
Number buttons Select the TV channel.
while pressing
the TV button
1
VIDEO1
2
VIDEO2
- is for selecting a channel number greater than
10. (For example, for channel 25, press -, then
2 and 5.)
3
VIDEO3
4
VIDEO4
5
VIDEO5
Note
6
VIDEO6
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
7
VIDEO7
8
VIDEO8
9*
COMPONENT 1
COMPONENT 2
COMPONENT 3
CLEAR*
AMP
MENU*
PICTURE
NAVI*
COMPONENT 4
* Except for North American models.
60GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating for the THEATRE
SYNC function
Using the Sound Effect
Point the remote to the direction of TV and this
system, then press THEATRE SYNC once.
Reinforcing bass frequencies
You can reinforce bass frequencies.
If this function does not work, change the
transmit time. The transmit time varies
depending on the TV.
Press DYNAMIC BASS.
Bass frequencies are effectively reinforced.
To change the transmit time
To turn off the sound effect
Press and hold TV CH + while entering the
code for transmit time (see the table) using
the number buttons.
Press DYNAMIC BASS again.
The transmit time from the remote is selected.
By pressing Number
Transmit time
TV CH +
1
2
3
4
5
6
7
8
0.5 (Default)
1
1.5
2
2.5
3
3.5
4
Note
• This function is only for SONY TVs. (This function
may not work on some SONY TVs.)
• If distance between TV and this system is too far, this
function may not work. Install the system near the
TV.
• Keep the remote pointed in the direction of the TV
and this system while entering the code.
61GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Sleep Timer
Changing the Brightness
of the Front Panel Display
You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
You can preset the time in 10 minutes
decrements.
The brightness of the front panel display can be
set to either of 2 levels.
1
2
Press AMP MENU.
Press SLEEP.
Press X/x repeatedly until “DIMMER”
appears in the front panel display, then
press ENTER or c.
Each time you press this button, the minutes
display (the remaining time) changes as follows:
SLEEP 90M t SLEEP 80M t SLEEP 70M
3
Press X/x to select the brightness of
the front panel display.
R
r
SLEEP OFF T SLEEP 10M ..... SLEEP 60M
• DIMMER ON: The front panel display
becomes dark.
• DIMMER OFF: Bright.
To check the remaining time
4
5
Press ENTER.
Press SLEEP once.
The setting is reflected.
To change the remaining time
Press AMP MENU.
Press SLEEP repeatedly to select the desired
time.
The AMP menu turns off.
To cancel the Sleep Timer
function
Press SLEEP repeatedly until “SLEEP OFF”
appears in the front panel display.
62GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press X/x to select [ON t], then press
ENTER.
Advanced Settings and Adjustments
xIf you have not entered a password
The display for registering a new password
appears.
Locking Discs
(CUSTOM PARENTAL CONTROL,
PARENTAL CONTROL)
PARENTAL CONTROL
Enter a new 4-digit password,
ENTER
You can set 2 kinds of playback restrictions for
the desired disc.
then press
.
• Custom Parental Control
You can set playback restrictions so that the
system will not play inappropriate discs.
• Parental Control
Playback of some DVD VIDEOs can be
limited according to a predetermined level
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
The same password is used for both Custom
Parental Control and Parental Control.
Enter a 4-digit password using the number
buttons, then press ENTER.
The display for confirming the password
appears.
xWhen you have already registered a
password
The display for entering the password
appears.
Preventing playback of
specific discs [CUSTOM
PARENTAL CONTROL]
PARENTAL CONTROL
Enter password, then press ENTER
.
You can set the same Custom Parental Control
password for up to 40 discs. When you set the
41st-disc, the first disc is canceled.
1
2
3
Insert the disc you want to lock.
5
Enter or re-enter your 4-digit password
using the number buttons, then press
ENTER.
If the disc is playing, press x to stop
playback.
Press
DISPLAY while the system is
[Custom parental control is set.] appears
and the screen returns to the Control Menu.
in stop mode.
The Control Menu appears.
To turn off the Custom Parental
Control function
Press X/x to select
[PARENTAL CONTROL], then press
ENTER.
The options for [PARENTAL CONTROL]
appear.
2 Press X/x to select [OFF t], then press
(
)
)
1 2 2 7
ENTER.
(
1 8 3 4
DVD VIDEO
T
1 : 3 2 : 5 5
3 Enter your 4-digit password using the
number buttons, then press ENTER.
OFF
ON
PLAYER
PASSWORD
continued
63GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To play a disc for which Custom
Parental Control is set
(
)
)
1 2 2 7
(
1 8 3 4
DVD VIDEO
T
1 : 3 2 : 5 5
1 Insert the disc for which Custom Parental
Control is set.
OFF
ON
PLAYER
PASSWORD
The [CUSTOM PARENTAL CONTROL]
display appears.
3
Press X/x to select [PLAYER t], then
press ENTER.
CUSTOM PARENTAL CONTROL
Custom parental control is already
set. To play, enter your password
xIf you have not entered a password
The display for registering a new password
appears.
ENTER
and press
.
2 Enter your 4-digit password using the
PARENTAL CONTROL
number buttons, then press ENTER.
Enter a new 4-digit password,
The system is ready for playback.
ENTER
then press
.
Tip
• If you forget your password, enter the 6-digit number
“199703” using the number buttons when the
[CUSTOM PARENTAL CONTROL] display asks
you for your password, then press ENTER. The
display will ask you to enter a new 4-digit password.
Enter a 4-digit password using the number
buttons, then press ENTER.
The display for confirming the password
appears.
Limiting playback for children
[PARENTAL CONTROL]
(DVD only)
xWhen you have already registered a
password
The display for entering the password
appears.
Playback of some DVD VIDEOs can be limited
according to a predetermined level such as the
age of the users. The [PARENTAL CONTROL]
function allows you to set a playback limitation
level.
PARENTAL CONTROL
Enter password, then press ENTER
.
1
Press
in stop mode.
DISPLAY while the system is
The Control Menu appears.
2
Press X/x to select
[PARENTAL CONTROL], then press
ENTER.
4
Enter or re-enter your 4-digit password
using the number buttons, then press
ENTER.
The options for [PARENTAL CONTROL]
appear.
The display for setting the playback
limitation level appears.
64GB
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL CONTROL
LEVEL:
STANDARD:
PARENTAL CONTROL
LEVEL:
STANDARD:
4: PG13
USA
OFF
USA
The lower the value, the stricter the
limitation.
5
Press X/x to select [STANDARD], then
press ENTER.
To turn off the Parental Control
function
The selection items for [STANDARD] are
displayed.
Set [LEVEL] to [OFF] in Step 8.
To play a disc for which Parental
Control is set
PARENTAL CONTROL
LEVEL:
OFF
USA
USA
STANDARD:
1 Insert the disc and press H.
OTHERS
The display for entering your password
appears.
2 Enter your 4-digit password using the
number buttons, then press ENTER.
6
7
Press X/x to select a geographic area
as the playback limitation level, then
press ENTER.
The system starts playback.
Tip
The area is selected.
• If you forget your password, remove the disc and
repeat steps 1 to 3 of “Preventing playback of specific
you are asked to enter your password, enter “199703”
using the number buttons, then press ENTER. The
display will ask you to enter a new 4-digit password.
After you enter a new 4-digit password, replace the
disc in the system and press H. When the display for
entering your password appears, enter your new
password.
When you select [OTHERS t], select and
enter a standard code in the table of
(page 90) using the number buttons.
Press X/x to select [LEVEL], then press
ENTER.
The selection items for [LEVEL] are
displayed.
Note
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
system.
PARENTAL CONTROL
LEVEL:
OFF
OFF
STANDARD:
• Depending on the disc, you may be asked to change
the parental control level while playing the disc. In
this case, enter your password, then change the level.
If the Resume Play mode is canceled, the level returns
to the previous level.
8:
7: NC17
6:
5:
R
8
Press X/x to select the level you want,
then press ENTER.
Parental Control setting is complete.
continued
65GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the password
Getting Optimal Surround
Sound for a Room
1
Press
in stop mode.
DISPLAY while the system is
The Control Menu appears.
(SPEAKER FORMATION)
2
Press X/x to select
[PARENTAL CONTROL], then press
ENTER.
Depending on the shape of the room, there will
be some speakers you cannot install. For the
better surround sound, it is recommended that
first you decide the position of the speakers.
The options for [PARENTAL CONTROL]
appear.
1
Press FUNCTION repeatedly until
“DVD” appears in the front panel
display.
3
Press X/x to select [PASSWORD t],
then press ENTER.
The display for entering the password
appears.
2
Press
DISPLAY when the system is
in stop mode.
4
5
6
Enter your 4-digit password using the
number buttons, then press ENTER.
The Control Menu appears.
3
4
Press X/x to select
FORMATION], then press ENTER.
[SPEAKER
Enter a new 4-digit password using the
number buttons, then press ENTER.
To confirm your password, re-enter it
using the number buttons, then press
ENTER.
(
(
)
)
1
3
T
4 4
2 8
DVD VIDEO
0 : 0 3 : 0 4
SPEAKER FORMATION
SPEAKER FORMATION
AUTO CALIBRATION
If you make a mistake entering
your password
Press C before you press ENTER and input the
correct number.
Press X/x to select [SPEAKER
FORMATION], then press ENTER.
The options for [SPEAKER
FORMATION] appear.
SPEAKER FORMATION
STANDARD
5
Press C/c to select a setting.
66GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• [STANDARD]: when installing all the
speakers normally.
• [ALL FRONT - NO CENTER]: when
installing the front and surround speakers
in front of the listening position.
• [NO CENTER]: when installing the front
and surround speakers.
• [SECOND ROOM]: when installing the
front speakers in one room and surround
speakers in another.
• [NO SURROUND]: when installing the
center and front speakers.
6
7
Press ENTER.
The selected setting takes effect.
Press X/x to select [YES] or [NO], then
press ENTER.
• [YES]: continue with [AUTO
CALIBRATION], see Step 5 of
• [FRONT ONLY]: when installing the
front speakers.
• [NO]: exit [SPEAKER FORMATION].
SPEAKER FORMATION
Continue with AUTO CALIBRATION?
YES
NO
• [ALL FRONT]: when installing all the
speakers in front of the listening position.
Note
• In order to enjoy the surround sound after you change
the position of the speakers, it is recommended you
set [SPEAKER FORMATION], and then set [AUTO
CALIBRATION].
• To set [AUTO CALIBRATION], you need to
connect the supplied calibration mic.
continued
67GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate the
speakers which output sound.
Calibrating the
Appropriate Settings
Automatically
• When you change the [SIZE] setting in [SPEAKER
SETUP], the [SPEAKER FORMATION] setting
returns to [STANDARD].
(AUTO CALIBRATION)
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound
automatically.
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the volume
down. Give consideration to children and neighbor.
1
Press FUNCTION repeatedly until
“DVD” appears in the front panel
display.
2
Press
in stop mode.
DISPLAY when the system is
The Control Menu appears.
3
4
Press X/x to select
FORMATION], then press ENTER.
[SPEAKER
(
(
)
)
1
3
T
4 4
2 8
DVD VIDEO
0 : 0 3 : 0 4
SPEAKER FORMATION
SPEAKER FORMATION
AUTO CALIBRATION
Press X/x to select [AUTO
CALIBRATION], then press ENTER.
The options for [AUTO CALIBRATION]
appear.
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
YES
NO
Connect the calibration mic to the A.CAL
MIC jack on the front panel, and set it up at
the ear level using a tripod, etc. (not
supplied). The front of each speaker should
68GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• Reflections from walls or the floor may affect
measurements.
face the calibration mic, and there should be
no obstruction between the speakers and the
calibration mic. Be quiet during the
measurement.
• If an error message appears, follow the message,
then select [YES].
An error message appears when:
–the headphones are connected.
–the calibration mic is not connected.
–front speakers are not correctly connected.
–surround speakers are not correctly connected.
–front and surround speakers are not correctly
connected.
A.CAL MIC
–there is excessive noise around the calibration
mic.
Calibration mic
–the calibration mic is overloaded.
6
Press C/X/x/c to select [YES] or [NO],
then press ENTER.
xThe measurement is OK.
Disconnect the calibration mic, then select
[YES]. The result is implemented.
Measurement complete.
FRONT L :
FRONT R :
YES
YES
CENTER
:
NONE
SUBWOOFER : YES
SURROUND L : NONE
SURROUND R : NONE
If OK, unplug calibration mic and select
YES.
YES
NO
xThe measurement is not OK.
Follow the message, then select [YES] to
retry.
5
Press X/x to select [YES], then press
ENTER.
Measurement failure.
Check speaker connection.
Retry?
Calibration starts.
YES
NO
Measuring. Please wait a moment.
Tip
• You can check the distance between the listening
Note
Note
• While the Auto Calibration function works:
– do not turn off the power.
– do not press any button.
– do not change the volume.
– do not change the function.
• Avoid being in the measurement area and
making noise during the measurement (about 3
minutes), to avoid measurement failure. During
the measurement, test signals are output from
the speakers.
continued
69GB
Download from Www.Somanuals.com. All Manuals Search And Download.
– do not change the disc.
– do not insert or eject a disc.
– do not connect the headphones.
– do not disconnect the calibration mic.
Using the Setup Display
By using the Setup Display, you can make
various adjustments to items such as picture and
sound.
For an overall list of Setup Display items, see
Displayed items differ depending on the country
model.
Note
• Playback settings stored in the disc take priority over
the Setup Display settings and not all the functions
described may work.
1
Press
in stop mode.
DISPLAY when the system is
The Control Menu appears.
2
Press X/x to select
then press ENTER.
[SETUP],
The options for [SETUP] appear.
(
)
)
1 2 2 7
(
1 8 3 4
DVD VIDEO
:
:
QUICK
QUICK
CUSTOM
RESET
3
4
Press X/x to select [CUSTOM], then
press ENTER.
The Setup Display appears.
LANGUAGE SETUP
ENGLISH
ENGLISH
ORIGINAL
ENGLISH
OSD:
MENU:
AUDIO:
SUBTITLE:
Press X/x to select the setup item from
the displayed list: [LANGUAGE
SETUP], [SCREEN SETUP], [CUSTOM
SETUP], or [SPEAKER SETUP]. Then
press ENTER.
The Setup item is selected.
Example: [SCREEN SETUP]
70GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Selected item
• When you turn the system on after resetting and no
disc is in the system, the guide message appears on
the TV screen. To perform the Quick Setup
(page 19), press ENTER, to return to normal screen,
press CLEAR.
SCREEN SETUP
TV TYPE:
16:9
AUTO
ON
COLOR SYSTEM (VIDEO CD):
SCREEN SAVER:
BACKGROUND:
4:3 OUTPUT:
JACKET PICTURE
FULL
Setup items
5
6
Select an item using X/x, then press
ENTER.
The options for the selected item appear.
Example: [TV TYPE]
SCREEN SETUP
16:9
16:9
TV TYPE:
COLOR SYSTEM (VIDE
SCREEN SAVER:
BACKGROUND:
4:3 OUTPUT:
4:3 LETTER BOX
4:3 PAN SCAN
FULL
Options
Select a setting using X/x, then press
ENTER.
The setting is selected and setup is
complete.
SCREEN SETUP
TV TYPE:
4:3 LETTER BOX
COLOR SYSTEM (VIDEO CD):
SCREEN SAVER:
AUTO
ON
BACKGROUND:
4:3 OUTPUT:
JACKET PICTURE
FULL
Selected setting
To reset all of the [SETUP]
settings
1 Select [RESET] in Step 3 and press ENTER.
2 Select [YES] using X/x.
You can also quit the process and return to
the Control Menu by selecting [NO] here.
3 Press ENTER.
return to the default settings. Do not press [/
1 while resetting the system as it takes a
few seconds to complete.
71GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Display or
Sound Track Language
[LANGUAGE SETUP]
Settings for the Display
[SCREEN SETUP]
Choose settings according to the TV to be
connected.
[LANGUAGE SETUP] allows you to set
various languages for the on-screen display or
sound track.
Select [SCREEN SETUP] in the Setup Display.
To use the display, see “Using the Setup
Select [LANGUAGE SETUP] in the Setup
Display. To use the display, see “Using the
The default settings are underlined.
SCREEN SETUP
TV TYPE:
16:9
SCREEN SAVER:
BACKGROUND:
BLACK LEVEL:
BLACK LEVEL (COMPONENT OUT):
4:3 OUTPUT:
ON
JACKET PICTURE
ON
LANGUAGE SETUP
OSD:
ENGLISH
ENGLISH
ORIGINAL
ENGLISH
MENU:
AUDIO:
SUBTITLE:
OFF
FULL
x [TV TYPE]
Selects the aspect ratio of the connected TV (4:3
standard or wide).
x [OSD] (On-Screen Display)
Switches the display language on the screen.
The default setting varies, depending on the
country model.
x [MENU] (DVD VIDEO only)
You can select the desired language for the
disc’s menu.
[4:3 LETTER
BOX]
Select this when you connect a 4:3
screen TV. Displays a wide picture
with bands on the upper and lower
portions of the screen.
x [AUDIO] (DVD VIDEO only)
Switches the language of the sound track.
When you select [ORIGINAL], the language
given priority in the disc is selected.
[4:3 PAN SCAN]
Select this when you connect a 4:3
screen TV. Automatically displays
the wide picture on the entire
screen and cuts off the portions
that do not fit.
x [SUBTITLE] (DVD VIDEO only)
Switches the language of the subtitle recorded
on the DVD VIDEO.
When you select [AUDIO FOLLOW], the
language for the subtitles changes according to
the language you selected for the sound track.
[16:9]
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
Tip
• If you select [OTHERS t] in [MENU], [AUDIO],
and [SUBTITLE], select and enter a language code
number buttons.
Note
• When you select a language in [MENU], [AUDIO],
or [SUBTITLE] that is not recorded on the DVD
VIDEO, one of the recorded languages will be
automatically selected (depending on the disc, the
language may not be selected automatically).
72GB
Download from Www.Somanuals.com. All Manuals Search And Download.
[4:3 LETTER BOX]
[4:3 PAN SCAN]
[ON]
Turns on the screen saver.
Turns off the screen saver.
[OFF]
x [BACKGROUND]
Selects the background color or picture on the
TV screen in stop mode or while playing a CD,
DATA CD (MP3 audio), or DATA DVD.
[16:9]
[JACKET
PICTURE]
The jacket picture (still picture)
appears, but only when the jacket
picture is already recorded on the
disc (CD-EXTRA, etc.). If the
disc does not contain a jacket
picture, the [GRAPHICS] picture
appears.
Note
• Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
vice versa.
[GRAPHICS]
A preset picture stored in the
system appears.
x[COLOR SYSTEM (VIDEO CD)] (Asian,
Australian, and Middle Eastern models
only)
[BLUE]
The background color is blue.
The background color is black.
[BLACK]
Select the color system when you play a VIDEO
CD.
x [BLACK LEVEL]
(Except for Asian, Australian, and Middle
Eastern models)
[AUTO]
Outputs the video signal in the
system of the disc, either PAL or
NTSC. If your TV uses a DUAL
system, select [AUTO].
Selects the black level (setup level) for the video
signals output from the jacks other than
COMPONENT VIDEO OUT.
[PAL]
Changes the video signal of an
NTSC disc and outputs it in the
PAL system.
[ON]
Sets the black level of the output
signal to the standard level.
[OFF]
Lowers the standard black level.
Use this when the picture becomes
too white.
[NTSC]
Changes the video signal of a PAL
disc and outputs it in the NTSC
system.
x [BLACK LEVEL (COMPONENT OUT)]
Note
• You cannot change the color system of the disc itself.
• You can change the color system of the system
(Except for Asian, Australian, and Middle
Eastern models)
Selects the black level (setup level) for the video
signals output from the COMPONENT VIDEO
OUT jacks.
You cannot select this and the setting is not
effective when the system outputs progressive
signal.
x[SCREEN SAVER]
The screen saver image appears when you leave
the system in pause or stop mode for 15 minutes,
or when you play back a CD, DATA CD (MP3
audio), or DATA DVD for more than 15 minutes.
The screen saver will help prevent your display
device from becoming damaged (ghosting). Press
[OFF]
[ON]
Sets the black level of the output
signal to the standard level.
any button (e.g.,
saver.
H
button) to cancel the screen
Raise the standard black level.
Use this when the picture becomes
too black.
continued
73GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x [4:3 OUTPUT]
This setting is effective only when you set [TV
TYPE] in [SCREEN SETUP] to [16:9]
(page 72). Adjust this to watch 4:3 aspect ratio
progressive signals. If you can change the aspect
ratio on your progressive format (525p/625p)
compatible TV, change the setting on your TV,
not the system.
Custom Settings
[CUSTOM SETUP]
Use this to set up playback related and other
settings.
Select [CUSTOM SETUP] in the Setup Display.
To use the display, see “Using the Setup
Note
• This setting is effective only when “P AUTO
(PROGRESSIVE AUTO)” or “P VIDEO
(PROGRESSIVE VIDEO)” is selected by using
The default settings are underlined.
CUSTOM SETUP
PAUSE MODE:
AUTO
OFF
ON
TRACK SELECTION:
MULTI-DISC RESUME:
AUDIO DRC:
[FULL]
Select this when you can change
the aspect ratio on your TV.
OFF
Registration Code
DivX:
[NORMAL]
Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left and
right sides of the image.
x [PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
Selects the picture in pause mode.
[AUTO]
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
16:9 aspect ratio TV
[FRAME]
The picture, including subjects
that do not move dynamically, is
output in high resolution.
x [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
[OFF]
No priority given.
Priority given.
[AUTO]
Note
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
74GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x[MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off.
Settings for the Speakers
[SPEAKER SETUP]
To obtain the best possible surround sound, set
for the size of the speakers you have connected
and their distance from your listening position.
Then use the test tone to adjust the level and the
balance of the speakers to the same level.
[ON]
Stores the resume settings in
memory for up to 40 discs.
[OFF]
Does not store the resume settings
in memory. Playback restarts at
the resume point only for the
current disc in the system.
Select [SPEAKER SETUP] in the Setup
Display. For details, see “Using the Setup
x[AUDIO DRC] (DVD VIDEO only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.
The default settings are underlined.
Note
• You cannot operate these setup items when you
connect headphones to the system.
[OFF]
No compression of dynamic
range.
SPEAKER SETUP
SIZE:
DISTANCE(FRONT):
DISTANCE(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):
[STANDARD]
Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
TEST TONE:
FRONT:
OFF
[MAX]
Compresses dynamic range fully.
YES
YES
YES
YES
CENTER:
SURROUND:
SUBWOOFER:
x[DivX]
(Except for North American models)
Displays the registration code for this system.
For more information, go to
To return to the default setting
when changing a setting
Select the item, then press CLEAR. Note that
only the [SIZE] setting does not return to the
default setting.
http://www.divx.com on the Internet.
x [SIZE]
If you do not connect center or surround
speakers, or move the surround speakers, set the
parameters for [CENTER] and [SURROUND]
and specify the surround speaker position. Since
the front speaker and subwoofer setting is fixed,
you cannot change them.
[FRONT]
[YES]
[CENTER]
[YES]: Normally select this.
[NONE]: Select this if no center
speaker is used.
[SURROUND]
[YES]: Normally select this.
[NONE]: Select this if no
surround speaker is used.
[SUBWOOFER]
[YES]
continued
75GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
• When you select an item, the sound cuts off for a
moment.
• When you change the [SIZE] setting, the [SPEAKER
FORMATION] setting returns to [STANDARD].
x [DISTANCE (FRONT)]
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 19), the settings is automatically
displayed.
0.0 - 7.0 m**/
0 - 23 ft
Be sure to change the value in the Setup Display
when you move the speakers.
1.0 - 7.0 m3)
3 - 23 ft
/
[L/R]
Surround speaker distance from
the listening position can be set in
0.2 meter (1 ft) increments from
0.0 to 7.0 meters** (0 to 23 ft).
0.0 - 7.0 m2)
0 - 23 ft
/
3.0 m/10 ft*
(appears except
when you set
[SURROUND] to
[NONE] in the
[SIZE] setting.)
default settings are changed.
Be sure to change the value in the Setup Display
when you move the speakers.
**0.0 to 6.9 meters for North American models.
Note
• When you set the distance, the sound cuts off for a
moment.
[L/R]
3.0 m/10 ft
Front speaker distance from the
listening position can be set in
0.2 meter (1 ft) increments from
1.0 to 7.0 meters3) (3 to 23 ft).
1)
• If all front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
[CENTER]
3.0 m/10 ft
(appears when you
set [CENTER] to
[YES] in the [SIZE]
setting.)
Center speaker distance can be
moved up to 1.6 meters (5 ft)
closer to the listening position
from the front speaker distance,
in 0.2 meter (1 ft) increments.
1)
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
default settings are changed.
2)0.0 to 6.9 meters for North American models.
3)0.9 to 6.9 meters for North American models.
[L/R]
Set this between –6.0 dB and 0.0
dB in 1.0 dB increments.
0.0 dB
x [DISTANCE (SURROUND)]
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 19), the settings is automatically
displayed.
[CENTER]
0.0 dB
(appears when you
set [CENTER] to
[YES] in the [SIZE]
setting.)
Set this between –6.0 dB and +6.0
dB in 1.0 dB increments.
76GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Press X/x repeatedly to select [ON],
then press ENTER.
[SUBWOOFER]
0.0 dB
Set this between –6.0 dB and +6.0
dB in 1.0 dB increments.
You will hear the test tone from each
speaker in sequence.
x[LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
(This settings appear except when you set
[SURROUND] to [NONE] in the [SIZE]
setting.)
From your listening position, adjust the
value of [LEVEL (FRONT)] or [LEVEL
(SURROUND)] using C/X/x/c.
The test tone is emitted from only the
speaker which you are adjusting.
8
Press ENTER when you have finished
making adjustments.
[L/R]
0.0 dB
Set this between –6.0 dB and +6.0
dB in 1.0 dB increments.
9
Press X/x repeatedly to select [TEST
TONE], then press ENTER.
To adjust the volume of all the
speakers at one time
10
Press X/x repeatedly to select [OFF],
then press ENTER.
Turn the VOLUME control on the system, or
press VOLUME +/– on the remote.
Note
• When you adjust the speaker settings, the sound cuts
off for a moment.
x[TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF]
[ON]
The test tone is not emitted from the
speakers.
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
Adjusting the speaker level by
using the test tone
1
2
3
Press
in stop mode.
DISPLAY when the system is
The Control Menu appears.
Press X/x to select
then press ENTER.
[SETUP],
The options for [SETUP] appear.
Press X/x to select [CUSTOM], then
press ENTER.
The Setup Display appears.
4
5
Press X/x repeatedly to select
[SPEAKER SETUP], then press ENTER
or c.
Press X/x repeatedly to select [TEST
TONE], then press ENTER or c.
77GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Returning to the Default
Settings
You can return the system parameters, such as
preset stations, to the default settings.
A
"/1
x
1
2
Press "/1 to turn on the system.
Press x, A, and "/1 on the system at
the same time.
“COLD RESET” appears in the front panel
display and the default settings are returned.
78GB
Download from Www.Somanuals.com. All Manuals Search And Download.
If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.
Additional Information
Precautions
On cleaning discs, disc/lens
cleaner
• Do not use a commercially available cleaning disc
or disc/lens cleaner (wet or spray type). These may
cause apparatus to malfunction.
On power sources
• AC power cord (mains lead) must be changed only at
the qualified service shop.
On your TV’s color
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet (mains), even if the unit itself has been turned
off.
• If the speakers should cause the TV screen to have
color irregularity, turn off the TV then turn it on after
15 to 30 minutes. If color irregularity should persist,
place the speakers farther away from the set.
On placement
IMPORTANT NOTICE
• Place the system in a location with adequate
ventilation to prevent heat build-up in the system.
• At high volume, over long periods of time, the cabinet
becomes hot to the touch. This is not a malfunction.
However, touching the cabinet should be avoided. Do
not place the unit in a confined space where
ventilation is poor as this may cause overheating.
• Do not block the ventilation slots by putting anything
on the system. The system is equipped with a high
power amplifier. If the ventilation slots are blocked,
the unit can overheat and malfunction.
Caution: This system is capable of holding a still
video image or on-screen display image on your
television screen indefinitely. If you leave the still
video image or on-screen display image displayed
on your TV for an extended period of time you risk
permanent damage to your television screen.
Projection televisions are especially susceptible to
this.
On moving the system
When you carry the system, use the following
procedure to protect the inner mechanism.
• Do not place the system on a soft surface such as a rug
and do not block the ventilation holes.
1 Press FUNCTION repeatedly to select
• Do not place the system in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
“DVD.”
2 Make sure that all discs are removed from
the system.
On operation
3 Press x and . simultaneously.
“MECHA LOCK” appears in the front panel
display after “STANDBY.”
• If the system is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lenses inside the system. Should
this occur, the system may not operate properly. In
this case, remove the disc and leave the system turned
on for about half an hour until the moisture
evaporates.
4 Remove the AC power cord (mains lead)
from the wall outlet (mains).
• When you move the system, take out any disc. If you
don’t, the disc may be damaged.
On adjusting volume
• Do not turn up the volume while listening to a section
with very low level inputs or no audio signals. If you
do, the speakers may be damaged when a peak level
section is suddenly played.
On cleaning
• Clean the cabinet, panel, and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
79GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes about the Discs
Troubleshooting
If you experience any of the following
difficulties while using the system, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should any
problem persist, consult your nearest Sony
dealer.
On handling discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
Note that if service personnel changes some
parts during repair, these parts may be retained.
Power
The power is not turned on.
• Check that the AC power cord (mains lead) is
connected securely.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it in
a car parked in direct sunlight as the
temperature may rise considerably inside the
car.
If “PROTECTOR” and “PUSH POWER”
appears alternately in the front panel display.
Press "/1 to turn off the system, and check the
following items after “STANDBY” disappears.
• Are the + and – speaker cords short-circuited?
• Are you using only the specified speakers?
• Is anything blocking the ventilation holes of the
system?
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a cleaning
cloth.
Wipe the disc from the center out.
After checking the above items and fixing any
problems, turn on the system. If the cause of the
problem cannot be found even after checking all the
above items, consult your nearest Sony dealer.
Picture
There is no picture.
• The video connecting cords are not connected
securely.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
• The video connecting cords are damaged.
• The system is not connected to the correct TV
This system can only play back a standard
circular disc. Using neither standard nor circular
discs (e.g., card, heart, or star shape) may cause
a malfunction.
• The video input on the TV is not set so that you
can view pictures from the system.
• You have set progressive format but your TV
cannot accept the signal in progressive format. In
this case, return the setting to interlace format (the
Do not use a disc that has a commercially
available accessory attached, such as a label or
ring.
• Even if your TV is compatible with progressive
format (525p/625p) signals, the image may be
affected when you set progressive format. In this
case, return the setting to interlace format (the
Picture noise appears.
• The disc is dirty or flawed.
• If the picture output from your system goes
through your VCR to get to your TV, the copy-
80GB
Download from Www.Somanuals.com. All Manuals Search And Download.
protection signal applied to some DVD programs
could affect picture quality. If you still experience
problems even when you connect your system
directly to your TV, try connecting your system to
• Move your TV away from the audio components.
• The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
• Clean the disc.
The sound loses stereo effect when you play a
VIDEO CD, a CD, or an MP3.
• Set [AUDIO] to [STEREO] by pressing AUDIO
Even though you set the aspect ratio in [TV
TYPE] of [SCREEN SETUP], the picture does
not fill the screen.
• The aspect ratio on the disc is fixed.
• Make sure the system is connected properly.
Color irregularity occurs on the TV screen.
The subwoofer and the front speakers in this system
are magnetically shielded to prevent magnetic
leakage. However, some leakage may occur, as a
high-strength magnet is employed. If this happens,
check the following items:
The surround effect is difficult to hear when
you are playing a Dolby Digital, DTS, or MPEG
audio sound track.
• Check the speaker connections and settings (page
• If the speakers are used with a CRT-based TV or
projector, install the speakers at least 0.3 m (1.0 ft)
from the TV set.
• Depending on the DVD, the output signal may not
be the entire 5.1 channel. It may be monaural or
stereo even if the sound track is recorded in Dolby
Digital or MPEG audio format.
• If the color irregularity persists, turn off the TV set
once, then turn it on after 15 to 30 minutes.
• If howling occurs, reposition the speakers farther
away from the TV set.
The sound comes from the center speaker
only.
• Depending on the disc, the sound may come from
the center speaker only.
• Make sure that no magnetic object (magnetic latch
on a TV stand, health care device, toy, etc.) is
placed near the speakers.
No sound is heard from the center speaker.
• Check the speaker connections and settings.
• Depending on the source, the effect of the center
speaker may be less noticeable.
Sound
There is no sound.
• The speaker cord is not connected securely.
• Press MUTING on the remote if “MUTING ON”
is displayed in the front panel display.
• The system is in pause mode or in Slow-motion
Play mode. Press H to return to normal play
mode.
No sound or only a very low-level sound is
heard from the surround speakers.
• Check the speaker connections and settings.
• Depending on the source, the effect of the
surround speakers may be less noticeable.
• Fast forward or fast reverse is performed. Press
H to return to normal play mode.
There is no sound from the speakers that are
indicated in the front panel display.
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate
The left and right sounds are unbalanced or
reversed.
• Check that the speakers and components are
connected correctly and securely.
Operation
There is no sound from the subwoofer.
• Check the speaker connections and settings (page
Radio stations cannot be tuned in.
• Check that the antenna (aerial) is connected
securely. Adjust the antenna (aerial) or connect an
external antenna (aerial) if necessary.
Severe hum or noise is heard.
• Check that the speakers and components are
connected securely.
• The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use direct
tuning.
• Check that the connecting cords are away from a
transformer or motor, and at least 3 meters (10 ft)
away from your TV set or a fluorescent light.
• No stations have been preset or the preset stations
have been cleared (when tuning by scanning
continued
81GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• Press DISPLAY so that the frequency appears in
the front panel display.
• It is larger than 3,072 (width) × 2,048 (height) in
normal mode, or more than 2,000,000 pixels in
Progressive JPEG which is mainly used on the
Internet WEB site.
The remote does not function.
• There are obstacles between the remote and the
system.
• It does not fit the screen (those images are
reduced).
• The [MODE (MP3, JPEG)] setting has been set to
[AUDIO (MP3)] (page 52).
• The distance between the remote and the system is
too far.
• If you cannot change the [MODE (MP3, JPEG)]
setting, re-load the disc or turn the system off, then
on.
• The remote is not pointed at the remote sensor on
the system.
• The batteries in the remote are weak.
• The DATA CD/DATA DVD contains a DivX
video file. (except for North American models)
The disc does not play.
• There is no disc inserted.
The MP3 audio tracks and JPEG image file
starts playing simultaneously.
• [AUTO] has been selected in [MODE (MP3,
• The disc is upside down.
Insert the disc with the playback side facing down.
• The disc is skewed on the disc tray.
• The region code on the DVD does not match the
system.
The DivX video file cannot be played. (except
for North American models)
• The file is not created in DivX format.
• The file has an extension other than “.AVI” or
“.DIVX.”
• Moisture has condensed inside the system and
may cause damage to the lenses. Remove the disc
and leave the system turned on for about half an
hour.
• The DATA CD/DATA DVD is not created in a
DivX format that conforms to ISO 9660 Level 1/
Level 2 or, Joliet/UDF.
The MP3 audio track cannot be played.
• The DATA CD is not recorded in the MP3 format
that conforms to ISO 9660 Level 1/Level 2, or
Joliet.
• The DivX video file is larger than 720 (width) ×
576 (height).
The titles of album/track/file name are not
displayed correctly.
• The system can only display numbers and letters
of the alphabets. Other characters are displayed as
[*].
• The DATA DVD is not recorded in an MP3
format that conforms to UDF (Universal Disk
Format).
• The MP3 audio track does not have the extension
“.MP3.”
A disc does not start playing from the
beginning.
• The data is not formatted in MP3 even though it
has the extension “.MP3.”
• Program Play, Shuffle Play, or Repeat Play has
been selected.
Press CLEAR to cancel these functions before
playing a disc.
• The data is not MPEG1 Audio Layer 3 data.
• The system cannot play audio tracks in MP3PRO
format.
• The [MODE (MP3, JPEG)] setting has been set to
• Resume Play has been selected.
During stop, press x on the system or the remote
• The title, DVD or PBC menu automatically
appears on the TV screen.
• If you cannot change the [MODE (MP3, JPEG)]
setting, re-load the disc or turn the system off, then
on.
• The DATA CD/DATA DVD contains a DivX
video file. (except for North American models)
The system starts playing the disc
automatically.
• The DVD features an auto playback function.
The JPEG image file cannot be played.
• The DATA CD is not recorded in a JPEG format
that conforms to ISO 9660 Level 1/Level 2, or
Joliet.
Playback stops automatically.
• Some discs may contain an auto pause signal.
While playing such a disc, the system stops
playback at the auto pause signal.
• The DATA DVD is not recorded in a JPEG format
that conforms to UDF (Universal Disk Format).
• It has an extension other than “.JPEG” or “.JPG.”
82GB
Download from Www.Somanuals.com. All Manuals Search And Download.
You cannot perform some functions such as
Stop, Search, Slow-motion Play, or Repeat
Play.
• Depending on the disc, you may not be able to
perform some of the operations above. See the
operating manual that came with the disc.
Self-diagnosis Function
(When letters/numbers appear in the
display)
When the self-diagnosis function is activated to
prevent the system from malfunctioning, a 5-
character service number (e.g., C 13 50) with a
combination of a letter and 4 digits appears on
the screen and the front panel display. In this
case, check the following table.
Messages do not appear on the screen in the
language you want.
• In the Setup Display, select the desired language
for the on-screen display in [OSD] under
The language for the sound track cannot be
changed.
• Multilingual tracks are not recorded on the DVD
being played.
C:13:50
• The DVD prohibits changing the language for the
sound track.
The subtitle language cannot be changed.
• Multilingual subtitles are not recorded on the
DVD being played.
First 3
Cause and/or corrective action
characters of
the service
number
• The DVD prohibits changing the subtitles.
C 13
The disc is dirty.
The subtitle cannot be turned off.
• The DVD prohibits turning off subtitles.
,Clean the disc with a soft cloth
The angles cannot be changed.
• Multi-angles are not recorded on the DVD being
C 31
The disc is not inserted correctly.
,Restart the system, then re-insert
the disc correctly.
• The DVD prohibits changing the angles.
E XX
To prevent a malfunction, the
system has performed the self-
diagnosis function.
A disc cannot be ejected and “LOCKED”
appears in the front panel display.
• Contact your Sony dealer or local authorized Sony
service facility.
(xx is a number)
,Contact your nearest Sony
dealer or local authorized Sony
service facility and give the 5-
character service number.
Example: E 61 10
[Data error] appears on the TV screen when
playing a DATA CD or DATA DVD.
• The MP3 audio track/JPEG image file/DivX
video file* you want to play is broken.
• The data is not MPEG1 Audio Layer 3 data.
• The JPEG image file format does not conform to
DCF.
When displaying the version
number on the screen
When you turn on the system, the version
number [VER.X.XX] (X is a number) may
appear on the screen. Although this is not a
malfunction and for Sony service use only,
normal system operation will not be possible.
Turn off the system, and then turn on the system
again to operate.
• The JPEG image file has the extension “.JPG” or
“.JPEG,” but is not in JPEG format.
• The file you want to play has the extension “.AVI”
or “.DIVX” but is not in DivX format, or is in
DivX format but does not conform to a DivX
Certified profiles.*
* Except for North American models.
The system does not work normally.
• Disconnect the AC power cord (mains lead) from
the wall outlet (mains), then reconnect after
several minutes.
VER.X.XX
83GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Center*: 142 W
(with SS-CT51)
Surround*: 142 W + 142
W
(with SS-TS51)
Subwoofer*: 140 W
(with SS-WS52)
Specifications
AUDIO POWER SPECIFICATIONS
for the US model
DAV-DX155
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION
Latin American models:
Stereo mode (rated)
100 W + 100 W (3 ohms at
1 kHz, 1 % THD)
Surround mode (reference) RMS output power, 10 %
THD
(FTC Output Power):
FL/FR/SL/SR/C: 84 W/ch
3 ohm at 170 - 20,000 Hz,
0.7 % THD
SW: 80 W 3 ohm at 40 -
170 Hz, 0.7 % THD
Front: 133 W + 133 W
(with SS-TS52)
Center*: 133 W
(with SS-CT51)
DAV-DX255
Surround*: 133 W + 133
W
(with SS-TS51)
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION
Subwoofer*: 135 W
(with SS-WS52)
(FTC Output Power):
FL/FR/SL/SR/C: 84 W/ch
3 ohm at 170 - 20,000 Hz,
0.7 % THD
SW: 160 W 1.5 ohm at 40 -
170 Hz, 0.7 % THD
DAV-DX255
US models:
Surround mode (reference) RMS output power, 10 %
THD
DAV-DX315
Front: 143 W + 143 W
(with SS-TS52)
Center*: 143 W
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION
(with SS-CT51)
Surround*: 143 W + 143
W
(FTC Output Power):
FL/FR/SL/SR/C: 84 W/ch
3 ohm at 170 - 20,000 Hz,
0.7 % THD
(with SS-TS51)
SW: 160 W 1.5 ohm at 40 -
170 Hz, 0.7 % THD
Subwoofer*: 285 W
(with SS-WS52B)
Other models:
Amplifier section
DAV-DX155
US models:
Surround mode (reference)RMS output power, 10 %
THD
Stereo mode (rated)
108 W + 108 W (3 ohms at
1 kHz, 1 % THD)
Surround mode (reference) RMS output power, 10 %
THD
Front: 142 W + 142 W
(with SS-TS52)
Center*: 142 W
(with SS-CT51)
Surround*: 142 W + 142
W
(with SS-TS51)
Subwoofer*: 140 W
(with SS-WS52)
Front: 143 W + 143 W
(with SS-TS52)
Center*: 143 W
(with SS-CT51)
Surround*: 143 W + 143
W
(with SS-TS51)
Subwoofer*: 285 W
(with SS-WS52B)
Mexican and other models:
Stereo mode (rated)
DAV-DX315
US models:
108 W + 108 W (3 ohms at
1 kHz, 1 % THD)
Surround mode (reference) RMS output power, 10 %
Surround mode (reference)RMS output power, 10 %
THD
THD
Front: 143 W + 143 W
(with SS-TS53)
Front: 142 W + 142 W
(with SS-TS52)
84GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Center*: 143 W
(with SS-CT51)
Surround*: 143 W + 143
W
Middle Eastern models: 531-1,602 kHz (with the
interval set at 9 kHz)
Asian models:
531-1,602 kHz (with the
interval set at 9 kHz)
(with SS-TS51)
Subwoofer*: 285 W
(with SS-WS52B)
530-1,710 kHz (with the
interval set at 10 kHz)
North American and Latin American models:
530-1,710 kHz (with the
Other models:
Stereo mode (rated)
108 W + 108 W (3 ohms at
1 kHz, 1 % THD)
interval set at 10 kHz)
531-1,710 kHz (with the
interval set at 9 kHz)
AM loop antenna (aerial)
450 kHz
Surround mode (reference)RMS output power, 10 %
THD
Antenna (aerial)
Intermediate frequency
Front: 143 W + 143 W
(with SS-TS53)
Center*: 143 W
(with SS-CT51)
Surround*: 143 W + 143
W
(with SS-TS51)
Subwoofer*: 285 W
(with SS-WS52B)
Video section
Outputs
VIDEO: 1 Vp-p 75 ohms
S VIDEO:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
*
Depending on the sound field settings and the source,
there may be no sound output.
Speakers (DAV-DX155/DX255)
Front
Inputs
TV/VCR (AUDIO IN)
AUDIO IN
Outputs (Analog)
Phones
Sensitivity: 450/250 mV
Sensitivity: 250/125 mV
Speaker system
Bass reflex, magnetically
shielded
65 mm (2 /8 inches) dia.
cone type
5
Speaker unit
Accepts low-and high-
impedance headphones.
Rated impedance
3.0 ohms
Dimensions (approx.)
92 × 220 × 83 mm
(3 /8 × 8 /4 × 3 /8 inches)
(w/h/d)
DVD system
Laser
5
3
3
Semiconductor laser
(DVD: λ = 650 nm)
(CD: λ = 790 nm)
Emission duration:
continuous
Mass (approx.)
0.7 kg (1 lb 9 oz)
Center
Speaker system
Bass reflex, magnetically
shielded
Signal format system
North American, Latin, and Mexican models:
NTSC
5
Speaker unit
65 mm (2 /8 inches) dia.
cone type
3.0 ohms
Other models:
NTSC/PAL
Rated impedance
Dimensions (approx.)
260 × 94.5 × 86 mm
(10 /4 × 3 /4 × 3 /2 inches)
(w/h/d)
Tuner section
System
1
3
1
PLL quartz-locked digital
synthesizer system
Mass (approx.)
0.7 kg (1 lb 9 oz)
FM tuner section
Tuning range
Surround
North American models: 87.5 – 108.0 MHz
(100 kHz step)
Speaker system
Bass reflex, magnetically
shielded
65 mm (2 /8 inches) dia.
5
Other models:
87.5 – 108.0 MHz
(50 kHz step)
Speaker unit
cone type
Antenna (aerial)
FM wire antenna (aerial)
Rated impedance
3.0 ohms
Antenna (aerial) terminals 75 ohms, unbalanced
Dimensions (approx.)
92 × 151 × 83 mm
(3 /8 × 6 × 3 /8 inches)
(w/h/d)
5
3
Intermediate frequency
AM tuner section
Tuning range
10.7 MHz
Mass (approx.)
0.6 kg (1 lb 6 oz)
continued
85GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Subwoofer
Speaker system
Subwoofer
Speaker system
Speaker unit
Bass reflex
160 mm (6 /8 inches) dia.
cone type
Bass reflex, magnetically
shielded
160 mm (6 /8 inches) dia.
3
3
Speaker unit
Rated impedance
1.5 ohms
cone type
Dimensions (approx.)
240 × 374 × 375 mm
(9 /2 × 14 /4 × 14 /8
inches)
(w/h/d)
6.7 kg (14 lb 13 oz)
Rated impedance
Dimensions (approx.)
3.0 ohms (SS-WS52)
1.5 ohms (SS-WS52B)
240 × 374 × 375 mm
(9 /2 × 14 /4 × 14 /8
inches) (w/h/d)
1
3
7
1
3
7
Mass (approx.)
Mass (approx.)
6.7 kg (14 lb 13 oz)
General
Power requirements
Speakers (DAV-DX315)
Front
North American and Mexican models:
120 V AC, 60 Hz
Latin American models: 110 – 240 V AC, 50/60 Hz
Argentine models:
Other models:
Speaker system
Two-Way Bass reflex
Speaker unit
Woofer: 70 × 100 mm
7
220 – 240 V AC, 50/60 Hz
220 – 240 V AC, 50/60 Hz
On: 140 W (Latin
(2 /8 × 4 inches) cone type
Tweeter: 50 mm (2 inches)
cone type
Power consumption
American models of
DAV-DX155), 150 W
(Mexicanandothermodels
of DAV-DX155),
Rated impedance
Dimensions (approx.)
3.0 ohms
92 × 602 × 83 mm
5
3
3
(3 /8 × 23 /4 × 3 /8 inches)
(w/h/d)
160 W (DAV-DX255/
DX315)
275 × 1,200 × 275 mm
7
1
7
(10 /8 × 47 /4 × 10 /8
inches) (w/h/d) with stand
(long)
Standby: 0.3 W (at the
Power Saving mode)
430 × 86 × 418 mm
Dimensions (approx.)
Mass (approx.)
275 × 800 × 275 mm
1
3
7
1
7
(17 × 3 /2 × 16 /4 inches)
(w/h/d) incl. projecting
parts
(10 /8 × 31 /2 × 10 /8
inches) (w/h/d) with stand
(short)
5.0 kg (11 lb 1 oz)
Mass (approx.)
1.4 kg (3 lb 2 oz)
3.6 kg (7 lb 15 oz) with
stand (long)
3.2 kg (7 lb 1 oz) with
stand (short)
Design and specifications are subject to change
without notice.
Unpacking
• Speakers (5)
Center
Speaker system
Bass reflex, magnetically
shielded
65 mm (2 /8 inches) dia.
cone type
3.0 ohms
• Subwoofer (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (5 m × 4, 15 m × 2)
(16.5 ft. × 4, 50 ft. × 2)
• Video Cord (1)
5
Speaker unit
Rated impedance
Dimensions (approx.)
260 × 94.5 × 86 mm
1
3
1
(10 /4 × 3 /4 × 3 /2 inches)
(w/h/d)
• Remote Commander (remote) (1)
• R6 (size AA) batteries (2)
• Calibration mic (1)
Mass (approx.)
0.7 kg (1 lb 9 oz)
Surround
Speaker system
Speaker unit
• Foot pads (1 set)
Bass reflex
• Posts (long × 2, short × 2)*
• Bases (2)*
5
65 mm (2 /8 inches) dia.
cone type
3.0 ohms
92 × 151 × 83 mm
• Pedestal (2)*
Rated impedance
Dimensions (approx.)
• Screws (4)*
5
3
• Operating Instructions
• Speaker and TV connections (card) (1)
* DAV-DX315 only
(3 /8 × 6 × 3 /8 inches)
(w/h/d)
Mass (approx.)
0.6 kg (1 lb 6 oz)
86GB
Download from Www.Somanuals.com. All Manuals Search And Download.
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
Glossary
Album
Section of a music piece or an image on a data
CD containing MP3 audio tracks or JPEG files.
x Movie mode
The Movie mode is for use with stereo television
shows and all programs encoded in Dolby
Surround. The result is enhanced soundfield
directionality that approaches the quality of
discrete 5.1-channel sound.
Chapter
Subdivision of a title on a DVD. A title is
composed of several chapters.
Digital Cinema Auto Calibration
Digital Cinema Auto Calibration was developed
by Sony to automatically measure and adjusts
the speaker settings to your listening
x Music mode
The Music mode is for use with any stereo music
recordings, and provides a wide and deep sound
space.
environment in a short period of time.
Dolby Surround Pro Logic
Digital Direct Twin Drive Subwoofer
(DAV-DX255/DX315 only)
Utilizing Sony's proprietary S-Master
As one method of decoding Dolby Surround,
Dolby Surround Pro Logic produces four
channels from 2 channel sound. Compared with
the former Dolby Surround system, Dolby
Surround Pro Logic reproduces left-to-right
panning more naturally and localizes sounds
more precisely. To take full advantage of Dolby
Surround Pro Logic, you should have one pair of
surround speakers and a center speaker. The
surround speakers output monaural sound.
technology, the Digital Direct Twin Drive
Subwoofer features two S-Master Digital
Amplifiers that provide dedicated power to a
strategically located subwoofer for astounding
sound performance. Easy to set up, Digital
Direct Twin Drive Subwoofer provides a stable
sound field over a much larger listening area
without having to adjust frequency levels.
DTS
DivX®
Digital audio compression technology
developed by Digital Theater Systems, Inc. This
technology conforms to 5.1-channel surround.
This format comprises of stereo rear channel and
there is discrete subwoofer channel in this
format. DTS provides the same 5.1 discrete
channels of high quality digital audio. The good
channel separation is realized due to the all
channel data being recorded discretely and
processed in digitally.
Digital video technology created by DivX, Inc.
Videos encoded with DivX technology are
among the highest quality with a relatively small
file size.
Dolby Digital
This movie theater sound format is more
advanced than Dolby Surround Pro Logic. In
this format, the surround speakers output stereo
sound with an expanded frequency range, and a
subwoofer channel for deep bass is
independently provided. This format is also
called “5.1” with the subwoofer channel
designed as the 0.1 channel (since it functions
only when a deep bass effect is needed). All six
channels in this format are recorded separately
for superior channel separation. Furthermore,
since all the signals are processed digitally, less
signal degradation occurs.
DVD
A disc that contains up to 8 hours of moving
pictures even though its diameter is the same as
a CD.
The data capacity of a single-layer and single-
sided DVD, at 4.7 GB (Giga Byte), is 7 times
that of a CD. Furthermore, the data capacity of a
dual-layer and single-sided DVD is 8.5 GB, a
single-layer and double-sided DVD 9.4 GB, and
a dual-layer and double-sided DVD 17 GB.
The picture data uses the MPEG 2 format, one of
Dolby Pro Logic II
Dolby Pro Logic II creates five full-bandwidth
output channels from 2 channel sources. This is
continued
87GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-angle function
Various angles of a scene, or viewpoints of the
video camera are recorded on some DVDs.
a worldwide standard of digital compression
technology. The picture data is compressed to
about 1/40 of its original size. The DVD also
uses the variable rate coding technology that
processes allocated data according to the status
of the picture.
The audio data is recorded in Dolby Digital as
well as in PCM, allowing you to enjoy more
realistic audio presence.
Multilingual function
Several languages for the sound or subtitles in a
picture are recorded on some DVDs.
Parental Control
A function of the DVD to limit playback of the
disc by the age of the users according to the
limitation level in each country. The limitation
varies from disc to disc; when it is activated,
playback is completely prohibited, violent
scenes are skipped or replaced with other scenes
and so on.
Furthermore, various advanced functions such
as the multi-angle, multilingual, and Parental
Control functions are provided with the DVD.
DVD-RW
A DVD-RW is a recordable and rewritable disc
that is the same size as a DVD VIDEO. The
DVD-RW has two different modes: VR mode
and Video mode. DVD-RWs created in Video
mode have the same format as a DVD VIDEO,
while discs created in VR (Video Recording)
mode allow the contents to be programmed or
edited.
Playback Control (PBC)
Signals encoded on VIDEO CDs (Version 2.0)
to control playback.
By using menu screens recorded on VIDEO
CDs with PBC functions, you can enjoy playing
simple interactive programs, programs with
search functions, and so on.
DVD+RW
A DVD+RW (plus RW) is a recordable and
rewritable disc. DVD+RWs use a recording
format that is comparable to the DVD VIDEO
format.
Progressive format
(sequential scanning)
In contrast to the Interlace format, the
progressive format can reproduce 50 - 60 frames
per second by reproducing all scanning lines
(525 lines for the NTSC system, 625 lines for the
PAL system). The overall picture quality
increases and still images, text and horizontal
lines appear sharper. This format is compatible
with the 525 or 625 progressive format.
File
A JPEG image recorded or a DivX video* on a
DATA CD/DATA DVD. (“File” is an exclusive
definition for this system.) A single file consists
of a single image or movie.
* Except for North American models.
Region Code
Film based software, Video based
software
This system is used to protect copyrights. A
region number is allocated on each DVD system
or DVD disc according to the sales region. Each
region code is shown on the system as well as on
the disc packaging. The system can play discs
that match its region code. The system can also
play discs with the “ ” mark. Even when the
region code is not shown on the DVD, the region
limit may still apply.
DVDs can be classified as Film based or Video
based software. Film based DVDs contain the
same images (24 frames per second) that are
shown at movie theaters. Video based DVDs,
such as television dramas or sit-coms, displays
images at 30 frames (or 60 fields) per second.
ALL
Interlace format
(Interlaced scanning)
Scene
The Interlace format is the NTSC standard
method for displaying TV images at 30 frames
per second. Each frame is scanned twice -
alternately between the even numbered scanning
lines and then odd numbered scanning lines, at
60 times per second.
On a VIDEO CD with PBC (playback control)
functions, the menu screens, moving pictures
and still pictures are divided into sections called
“scenes.”
88GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Title
The longest section of a picture or music feature
on a DVD, movie, etc., in video software, or the
entire album in audio software.
Track
Section of a picture or a music piece on a
VIDEO CD, CD, or MP3. An album is
composed of several tracks (MP3 only).
VIDEO CD
A compact disc that contains moving pictures.
The picture data uses the MPEG 1 format, one of
a worldwide standard of digital compression
technology. The picture data is compressed to
about 1/140 of its original size. Consequently, a
12 cm VIDEO CD can contain up to 74 minutes
of moving pictures.
VIDEO CDs also contain compact audio data.
Sounds outside the range of human hearing are
compressed while sounds we can hear are not
compressed. VIDEO CDs can hold 6 times the
audio information of conventional audio CDs.
There are 2 versions of VIDEO CDs.
• Version 1.1: You can play only moving
pictures and sounds.
• Version 2.0: You can play high-resolution still
pictures and enjoy PBC functions.
This system conforms to both versions.
89GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
1027 Afar
1183 Irish
1347 Maori
1507 Samoan
1508 Shona
1509 Somali
1511 Albanian
1512 Serbian
1513 Siswati
1514 Sesotho
1515 Sundanese
1516 Swedish
1517 Swahili
1521 Tamil
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian
1059 Bulgarian
1060 Bihari
1061 Bislama
1066 Bengali;
Bangla
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
1186 Scots Gaelic
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
1349 Macedonian
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
1358 Maltese
1363 Burmese
1365 Nauru
1217 Hindi
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1248 Indonesian
1253 Icelandic
1254 Italian
1257 Hebrew
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic
1299 Cambodian
1300 Kannada
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1369 Nepali
1376 Dutch
1525 Telugu
1527 Tajik
1528 Thai
1379 Norwegian
1393 Occitan
1403 (Afan)Oromo
1408 Oriya
1417 Punjabi
1428 Polish
1435 Pashto;
Pushto
1436 Portuguese
1463 Quechua
1481 Rhaeto-
Romance
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1501 Sangho
1502 Serbo-
Croatian
1529 Tigrinya
1531 Turkmen
1532 Tagalog
1534 Setswana
1535 Tonga
1538 Turkish
1539 Tsonga
1540 Tatar
1543 Twi
1557 Ukrainian
1564 Urdu
1572 Uzbek
1581 Vietnamese
1587 Volapük
1613 Wolof
1632 Xhosa
1665 Yoruba
1684 Chinese
1697 Zulu
1313 Latin
1326 Lingala
1327 Laothian
1332 Lithuanian
1334 Latvian;
Lettish
1171 Faroese
1174 French
1181 Frisian
1503 Singhalese
1505 Slovak
1506 Slovenian
1345 Malagasy
1703 Not specified
Parental Control Area Code List
Code Area
Code Area
Code Area
Code Area
2044 Argentina
2047 Australia
2046 Austria
2057 Belgium
2070 Brazil
2079 Canada
2090 Chile
2165 Finland
2174 France
2109 Germany
2248 India
2238 Indonesia
2254 Italy
2276 Japan
2304 Korea
2363 Malaysia
2362 Mexico
2149 Spain
2376 Netherlands
2390 New Zealand
2379 Norway
2499 Sweden
2086 Switzerland
2528 Thailand
2184 United
Kingdom
2427 Pakistan
2424 Philippines
2436 Portugal
2489 Russia
2092 China
2115 Denmark
2501 Singapore
90GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to Parts and Controls
For more information, refer to the pages indicated in parentheses.
Front panel
F
(remote sensor) (9)
Rear panel
ANTENNA
AM
MONITOR OUT
VIDEO
SPEAKER
COMPONENT VIDEO OUT
B/CB R/CR
TV/VCR
COAXIAL
FM75
Y
P
P
S
VIDEO
(DVD ONLY)
FRONT
R
FRONT
L
CENTER
WOOFER
SUR
R
SUR
L
R
AUDIO IN
L
(DVD ONLY)
B MONITOR OUT (S VIDEO/VIDEO) jacks
continued
91GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel display
About the indications in the front panel display
A Lights up when the time information of
a title or chapter appears in the front
panel display. (DVD only) (45)
G Playing status (DVD function only)
H Lights up when the DYNAMIC BASS is
selected. (61)
B Lights up when the color system is set
to NTSC. (Asian, Australian, and Middle
Eastern models only) (17)
I Lights up when CD is loaded.
J Lights up when the system outputs
progressive signals (DVD function
only). (25)
C Lights up when a station is received.
(Radio only) (58)
K Indicates the selected [SPEAKER
D Monaural/Stereo effect (Radio only)
FORMATION]. (66)
L Current surround format (Except for
E Lights up when the sleep timer is set.
JPEG)
M Displays system’s status such as
chapter, title, or track number, time
information, radio frequency, playing
status, sound field, etc.
F Lights up when the music or movie
mode is selected. (32)
92GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the Control Menu Display
DISPLAY
Use the Control Menu to select a function and to view related information. Press
repeatedly to turn on or change the Control Menu display as follows:
DISPLAY
, Control Menu display 1
m
Control Menu display 2 (appears for certain discs only)
m
Control Menu display off
Control Menu display
The Control Menu display 1 and 2 will show different items depending on the disc type. For details
about each item, see the pages in parentheses.
Example: Control Menu display 1 when playing a DVD VIDEO.
continued
93GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1)
Currently playing title number
2)
Currently playing chapter number
1)
Total number of titles
Playback status
(N Playback,
X Pause,
2)
Total number of chapters
Control Menu items
x Stop, etc.)
(
)
)
1 2 2 7
Type of disc being
played
(
1 8 3 4
DVD VIDEO
3)
T
1 : 3 2 : 5 5
4)
Playing time
Selected item
OFF
OFF
DISC
Current setting
Options
TITLE
CHAPTER
Function name of
selected Control
Menu item
REPEAT
ENTER
DISPLAY
Quit:
Operation message
1)Displays the scene number for VIDEO CDs (PBC is on), track number for VIDEO CDs/CDs, album number for
DATA CDs/DATA DVDs. DivX video album number for DATA CDs/DATA DVDs (except for North American
models).
2)Displays the index number for VIDEO CDs, MP3 audio track number, or JPEG image file number for DATA CDs/
DATA DVDs. DivX video file number for DATA CDs/DATA DVDs (except for North American models).
3)Displays Super VCD as “SVCD.” Displays “MP3” in the Control Menu display 1 or “JPEG” in the Control Menu
2 for DATA CDs/DATA DVDs.
4)Displays the date for JPEG files.
To turn off the display
Press
DISPLAY.
List of Control Menu items
Item
Item Name, Function, Relevant Disc Type
Selects the title, scene, or track to be played.
Selects the chapter or index to be played.
Selects the track to be played.
Selects the type of titles (DVD-RW/DVD-R) to be played, the [ORIGINAL] one, or an edited
[PLAY LIST].
Checks the elapsed time and the remaining playback time.
Input the time code for picture and music searching.
Displays the DVD/CD text or the MP3 track name.
94GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Sets the speaker formation./Adjust the level of each speaker automatically.
Selects the track to play in the order you want.
Plays the track in random order.
Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/track/album
repeatedly.
Adjusts the delay between the picture and sound.
*
*
Sets to prohibit playback on this system.
[QUICK] Setup (page 19)
Use Quick Setup to choose the desired language of the on-screen display, the aspect ratio of
the TV, and the size of the speakers you are using.
[CUSTOM] Setup
In addition to the Quick Setup setting, you can adjust various other settings.
[RESET]
Returns the settings in [SETUP] to the default setting.
Selects the album to be played.
[FILE] (page 36)
Selects the JPEG image file or DivX video file* to be played.
Displays the date the picture was taken by a digital camera.
**
**
**
**
Specifies the duration for which the slides are displayed on the screen.
Selects the effects to be used for changing slides during a slide show.
[MODE (MP3, JPEG)] (page 52)
Selects the data type; MP3 audio track (AUDIO), JPEG image file (IMAGE) or both
(AUTO) to be played when playing a DATA CD/DATA DVD.
* The DivX function is available on all models except for that of North America.
**These items are not displayed when playing a DATA CD/DATA DVD with DivX video file. (except for North
American models)
Tip
• The Control Menu icon indicator lights up in green
([PROGRAM], [SHUFFLE], [REPEAT], and [A/V SYNC] only). The [ORIGINAL/PLAY LIST] indicator lights
up in green when you select [PLAY LIST] (default setting).
when you select any item except [OFF]
t
95GB
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Display List
You can set the following items with the DVD Setup Display.
The order of the displayed items may be different from the actual display.
CUSTOM SETUP
PAUSE
LANGUAGE SETUP
OSD1)
AUTO
MODE
FRAME
MENU1)
TRACK
SELECTION AUTO
OFF
AUDIO1)
SUBTITLE1)
MULTI-DISC
RESUME
ON
OFF
AUDIO DRC
OFF
STANDARD
MAX
DivX5)
SCREEN SETUP
SPEAKER SETUP
TV TYPE2)
4:3 LETTER
BOX
SIZE
FRONT
YES
CENTER
YES
NONE
SURROUND YES
NONE
4:3 PAN
SCAN
16:9
AUTO
PAL
NTSC
ON
OFF
JACKET
PICTURE
GRAPHICS
BLUE
BLACK
ON
COLOR
SUBWOOFER YES
DISTANCE
(FRONT)
L
1.0 m – 7.0 m3)
SYSTEM
(VIDEO CD)3)
3 ft – 23 ft/0.9m – 6.9 m4)
1.0 m – 7.0 m3)
SCREEN
SAVER
R
3 ft – 23 ft/0.9m – 6.9 m4)
0.0 m – 7.0 m3)
BACKGROUND
CENTER
0 ft – 23 ft/0.0 m – 6.9 m4)
0.0 m – 7.0 m3)
DISTANCE
(SURROUND)
L
0 ft – 23 ft/0.0 m – 6.9 m4)
0.0 m – 7.0 m3)
R
BLACK LEVEL4)
0 ft – 23 ft/0.0 m – 6.9 m4)
OFF
OFF
ON
–6.0 dB – 0.0 dB
–6.0 dB – 0.0 dB
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
L
R
LEVEL
(FRONT)
BLACK LEVEL
(COMPONENT
OUT)4)
CENTER
SUBWOOFER
FULL
NORMAL
4:3 OUTPUT
L
R
LEVEL
(SURROUND)
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
OFF
ON
TEST TONE
1)Select the language you want to use from the displayed language list.
2)The default setting varies, depending on the country model.
3)Asian, Australian, and Middle Eastern models only.
4)North American models only.
5)Except for North American models.
96GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
M
A
N
E
O
F
B
P
BLACK LEVEL
C
H
COLOR SYSTEM (VIDEO
COMPONENT VIDEO OUT
25
CUSTOM PARENTAL
CONTROL 63
I
Installing the speakers on a wall
23
Q
R
J
D
L
Listening to other components
31
S
Digital Direct Twin Drive
Subwoofer 87
Locating a specific point by
98GB
Download from Www.Somanuals.com. All Manuals Search And Download.
T
U
V
99GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
ALPHABETICAL ORDER
BUTTON DESCRIPTIONS
A – O
P – Z
97)
63)
REPLAY/
63)
/
63)
* The H, number 5, and
VOLUME + buttons have
tactile dots. Use the tactile dots
as references when operating
the system.
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|