Micro-Computer Radiant Cooktop
RR-9215
INSTRUCTION MANUAL
Thank you for your purchase.
Please read thoroughly before initial use and keep in a safe
place for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
STRUCTURE DESCRIPTION & FUNCTION
OPERATION
8 power levels (wattage): 100, 300, 500, 700, 900, 1100, 1300, 1500.
1. Plug power cord to power source and place cookware centered on
cooktop. (Once power is connected, the LOCK button will illuminate).
2. To turn on, press LOCK followed by ON/OFF button. If ON/OFF is
not pressed within 30 seconds, unit will return to locked mode.
3. Press + or - button to set cooking level; press LOW button to jump to
lowest setting (100W) or press HIGH button for highest setting
(1500W).
Note: Factory default setting is at 900W.
CAUTION: When the Warning indicator is on, the ceramic plate is
extremely hot – DO NOT TOUCH.
TIMER SETTING
1. Press TIMER button.
2. Press + or - button to set cooking time.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Each single press is increment of 1 minute.
Press and hold for increments of 10 minutes.
Press LOW button to jump to 1 minute on the timer
Press HIGH button to jump to the maximum 8 hours.
Note: factory default is 2 hours.
Timer
button
Timer / Cook
indicator
LED
display
Cook
button
Warning
indicator
LOCK BUTTON
1. Press LOCK button to lock in settings.
ꢀ
ꢀ
When locked, display will jump between time left and setting.
No changes can be made (level or time).
2. Press LOCK button again to unlock.
Lock
button
Power level / Timer
controls
Power
button
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY POINTS
SELECTING THE PROPER COOKWARE
ꢀ
This radiant cooktop is not selective with cookware. However,
cookware with a flat bottom and matte finish will have the best heat
conductivity.
ꢀ
ꢀ
ꢀ
When the Warming indicator is on, this means the ceramic plate is
extremely hot, DO NOT TOUCH.
Cooker will automatically shut-off after 2 hours of inactivity (when not
set on timer).
ꢀ
It is not suggested to use pressure cooker on the cooktop. If you do
use one, please use with caution.
Place cooktop on flat surface, but keep a clearance of 4 inches all
around for proper ventilation. If air inlet or outlet is blocked, the
internal temperature will rise and cause unit to overheat and shutoff
during cooking.
CARE & MAINTENANCE
ꢀ
ꢀ
Never power on unit without cookware. May cause ceramic plate to
overheat and crack.
ꢀ
ꢀ
Unplug unit from power source.
Keep away from water source. Never immerse unit in water or clean
under running water.
Wipe ceramic plate and exterior surface with a soft damp cloth. If
excessively dirty, soak cloth in a mild detergent and water mixture.
ꢀ
ꢀ
ꢀ
ꢀ
Do not place paper or cloth in between the cooktop and cookware.
To prevent damage to your cookware, do not heat an empty pan.
Do not place one cooktop on top of another.
SPECIFICATIONS
Do not place on or near a hot gas or electric burner or in a heated
oven. If the surrounding temperature is high, unit will shut off.
Model
RR-9215
120V~ / 60Hz
1500W (max)
12.25 L x 15.5 W x 2.75 H in.
6.6 Lbs
ꢀ
Do not use cookware consisting of inferior enamel, synthetic material,
china or aluminum. DO NOT USE PLASTIC WRAP.
Voltage
ꢀ
ꢀ
Never heat an unopened can on the cooktop as it may explode.
Power consumption
Dimension
Weight
Plug cooktop in a dedicated 15-amp outlet. Do not share the outlet
with other appliances.
ꢀ
Do not damage the ceramic plate. Be careful not to drop anything
onto the ceramic plate. If the plate is broken or cracked, stop using
immediately. Turn unit off and unplug.
Power range
Cord length
100 ~ 1500 W
4ft
ꢀ
ꢀ
Deep-fry is prohibited.
This cooktop is not intended for use by persons (including children)
with reduced physical sensory or mental capabilities; or lack of
experience and knowledge, unless supervised by person responsible
for their safety.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING / ERROR CODES
PROBLEM
CHECK POINTS
Unit is plugged in
but power indicator
does not come on
Power indicator is
lit but not heating
ꢀ Is cooktop firmly plugged into a correct
outlet?
ꢀ Was there a power shortage?
Your Guarantee
If this product is found to be faulty as a result of faulty materials or
workmanship within one year from date of purchase, it will be repaired
free of charge.
ꢀ Please contact Sunpentown
ꢀ Unstable voltage detected, please wait until
voltage returns to normal.
Error code: E2
Error code: E4
This guarantee is subject to the following terms:
•
•
Sunpentown must be notified of the fault.
Proof of purchase must be presented to Sunpentown’s
nominated representative.
The warranty will be void if the product if modified, misused or
repaired by an unauthorized person.
The warranty after repair will not be extended beyond the original
one-year period.
All replacement parts will be new or reconditioned.
Parts, which are replaced, become the property of Sunpentown.
The warranty applies for the use of the product in the USA only.
ꢀ Blown fuse, please contact Sunpentown.
ꢀ Internal temperature is too high. Please
check if fan is running; if ambient
temperature is high; or if air inlet or outlet is
blocked.
ꢀ Check if unit reached set timer.
ꢀ Unit has been operating and idle for 2 hours.
Safety feature automatically shuts unit off
after 2 hours with no setting changes.
ꢀ Is the Display indicating any of the above
error code?
Error code: E5
•
•
Unit suddenly stops
heating during
normal operation
•
•
•
What is NOT COVERED:
Warranty does not include freight charges.
Incidental or consequential damage caused by possible defects
with this product.
Damage to product caused by improper power supply voltage,
accident, fire, floods or acts of nature.
Failure of product resulting from unauthorized modifications to
the product.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
•
•
•
•
•
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Improper installation or failure to perform the necessary
maintenance.
NOTE: This equipment has been tested and found to comply with the limits for a
consumer ISM equipment, pursuant to Part 18 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
This GUARANTEE is in addition to your Statutory Rights
SUNPENTOWN INTERNATIONAL INC.
1-800-330-0388
ꢀ
ꢀ
ꢀ
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
ꢀ
Consult the dealer or an experienced radio TV technician for help.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|