MODEL
RU
2ZZ9990082
Download from Www.Somanuals.com. All Manuals Search And Download.
FEDERAL EMISSIONS COMPONENT DEFECT WARRANTY
EMISSIONS COMPONENT DEFECT WARRANTY COVERAGE - This emission warranty is applic-
able in all States, except the State of California
Fuji Heavy Industries Ltd. and Robin America Inc., Wood Dale Illinois, (herein "ROBIN AMERICA")
warrant(s) to the initial retail purchaser and each subsequent owner, that this Nonroad engine
(herein "engine") has been designed, built, and equipped to conform at the time of initial sale to all
applicable regulations of the U.S. Environmental Protection Agency (EPA), and that the engine is
free of defects in materials and workmanship which would cause this engine to fail to conform with
EPA regulations during its warranty period.
For the components listed under PARTS COVERED, the service dealer authorized by ROBIN
AMERICA will, at no cost to you, make the necessary diagnosis, repair, or replacement necessary to
ensure that the engine complies with applicable U.S. EPA regulations.
EMISSION COMPONENT DEFECT WARRANTY PERIOD
The warranty period for this engine begins on the date of sale to the initial purchaser and continues
for a period of 2 years.
PARTS COVERED
Listed below are the parts covered by the Emission Components Defect Warranty. Some of the parts
listed below may require scheduled maintenance and are warranted up to the first scheduled
replacement point for that part.
(1) Fuel Metering System
(3) Ignition System
(i) Carburetor and internal parts (and/or pres-
sure regulator or fuel injection system).
(i) Spark plugs.
(ii) Magneto or electronic ignition system.
(ii) Air/fuel ratio feedback and control system,
if applicable.
(iii) Spark advance/retard system, if applica-
ble.
(iii) Cold start enrichment system, if applica-
ble.
(4) Exhaust manifold, if applicable
(5) Miscellaneous Items Used in Above Systems
(i) Electronic controls, if applicable
(iv) Regulator assy (gaseous fuel, if applica-
ble)
(ii) Hoses, belts, connectors, and assem-
blies.
(2) Air Induction System
(i) Intake manifold, if applicable
(ii) Air filter.
(iii) Filter lock assy (gaseous fuel, if applica-
ble)
OBTAINING WARRANTY SERVICE
To obtain warranty service, take your engine to the nearest authorized Robin America service
dealer. Bring your sales receipts indicating date of purchase for this engine. The service dealer
authorized by ROBIN AMERICA will perform the necessary repairs or adjustments within a reason-
able amount of time and furnish you with a copy of the repair order. All parts and accessories
replaced under this warranty become the property of ROBIN AMERICA.
WHAT IS NOT COVERED
*Conditions resulting from tampering, misuse, improper adjustment (unless they were made by the
service dealer authorized by ROBIN AMERICA during a warranty repair), alteration, accident, failure
to use the recommended fuel and oil, or not performing required maintenance services.
Download from Www.Somanuals.com. All Manuals Search And Download.
*The replacement parts used for required maintenance services.
*Consequential damages such as loss of time, inconvenience, loss of use of the engine or equip-
ment, etc.
*Diagnosis and inspection charges that do not result in warranty-eligible service being performed.
*Any non-authorized replacement part, or malfunction of authorized parts due to use of non-autho-
rized parts.
OWNER'S WARRANTY RESPONSIBILITIES
As the engine owner, you are responsible for the performance of the required maintenance listed in
your owner's manual. ROBIN AMERICA recommends that you retain all receipts covering mainte-
nance on your engine, but ROBIN AMERICA cannot deny warranty solely for the lack of receipts or
for your failure to ensure the performance of all scheduled maintenance.
As the engine owner, you should however be aware that ROBIN AMERICA may deny warranty
coverage if your engine or a part has failed due to abuse, neglect, improper maintenance or unap-
proved modifications.
You are responsible for presenting your engine to the nearest service dealer authorized by ROBIN
AMERICA when a problem exists.
If you have any questions regarding your warranty rights and responsibilities, you should contact
the Robin America customer service department at 1-630-350-8200 for the information.
THINGS YOU SHOULD KNOW ABOUT THE EMISSION CONTROL SYSTEM WARRANTY
MAINTENANCE AND REPAIRS
You are responsible for the proper maintenance of the engine. You should keep all receipts and
maintenance records covering the performance of regular maintenance in the event questions
arise. These receipts and maintenance records should be transferred to each subsequent owner of
the engine. ROBIN AMERICA reserves the right to deny warranty coverage if the engine has not
been properly maintained. Warranty claims will not be denied, however, solely because of the lack
of required maintenance or failure to keep maintenance records.
MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND
SYSTEMS MAY BE PERFORMED BY ANY REPAIR ESTABLISHMENT OR INDIVIDUAL ;
HOWEVER, WARRANTY REPAIRS MUST BE PERFORMED BY A SERVICE DEALER AUTHO-
RIZED BY ROBIN AMERICA. THE USE OF PARTS THAT ARE NOT EQUIVALENT IN PERFOR-
MANCE AND DURABILITY TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF
THE EMISSION CONTROL SYSTEM AND MAY HAVE A BEARING ON THE OUTCOME OF A
WARRANTY CLAIM.
If other than the parts authorized by ROBIN AMERICA are used for maintenance replacements or
for the repair of components affecting emission control, you should assure yourself that such parts
are warranted by their manufacturer to be equivalent to the parts authorized by ROBIN AMERICA
in their performance and durability.
HOW TO MAKE A CLAIM
All repair qualifying under this limited warranty must be performed by a service dealer authorized by
ROBIN AMERICA. In the event that any emission-related part is found to be defective during the
warranty period, you shall notify Robin America customer service department at 1-630-350-8200
and you will be advised of the appropriate warranty service dealer or service providers where the
warranty repair can be performed.
Download from Www.Somanuals.com. All Manuals Search And Download.
CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS
The California Air Resources Board and Fuji Heavy Industries Ltd. (herein "FUJI") are pleased
to explain the emission control system warranty on your 2005 and later Small Off-Road engine
(herein "engine"). In California, new engine must be designed, built and equipped to meet the
State's stringent anti-smog standards. FUJI must warrant the emission control system on your
engine for the periods of time described below, provided there has been no abuse, neglect or
improper maintenance of your engine. Your emission control system may include parts such as
the carburetor or fuel-injection system, and the ignition system. Also included may be hoses,
belts, connectors and other emission-related assemblies. Where a warrantable condition exists,
FUJI will repair your engine at no cost to you including diagnosis, parts and labor.
MANUFACTURER'S WARRANTY COVERAGE :
The 2005 and later engines are warranted for two (2) years. If any emission related part on your
engine is defective, the part will be repaired or replaced by FUJI.
OWNER'S WARRANTY RESPONSIBILITIES :
-As the engine owner, you are responsible for the performance of the required mainte-
nance listed in your Owner's Manual. FUJI recommends that you retain all receipts
covering maintenance on your engine, but FUJI cannot deny warranty solely for the lack
of receipts or for your failure to ensure the performance of all scheduled maintenance.
-As the engine owner, you should ,however, be aware that FUJI may deny you warranty
coverage if your engine or a part has failed due to abuse, neglect, improper maintenance
or unapproved modifications.
-You are responsible for presenting your engine to a service dealer or warranty station
authorized by ROBIN AMERICA Inc. 940 Lively Blvd., Wood Dale, IL 60191 (herein
ROBIN AMERICA) as soon as a problem exists. The warranty repairs should be
completed in a reasonable amount of time, not to exceed 30 days.
If you have any questions regarding your warranty rights and responsibilities, you should
contact the Robin America Inc. Customer Service Department at 1-630-350-8200
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
on Emission Control Systems
- California Only -
FUJI warrants to the owner of the 2005 and later engine that the engine (1)has been designed,
built and equipped so as to conform at the time of manufacture with the applicable regulations of
the California Air Resources Board, and (2) is free from defects in materials and workmanship
that could cause it to fail to conform with those regulations as may be applicable in the terms
and conditions stated below.
A. COMMENCEMENT DATE
The warranty period begins on the date the engine is delivered to a first retail purchaser.
B. LENGTH OF COVERAGE
FUJI warrants to a first retail purchaser and each subsequent purchaser that the engine is free
from defects in materials and workmanship that cause the failure of a warranted emission-
related part for a period of two (2) years after the date of delivery to the first retail purchaser.
C. WHAT IS COVERED :
1. REPAIR OR REPLACEMENT PARTS
Repairs and replacement of any warranted part will be performed at no charge to you by
an authorized service dealer or a warranty station. You may contact the Robin America Inc.
Customer Service Department at 1-630-350-8200 to obtain the name of the nearest appro-
priate location where your warranty repairs are performed.
2. WARRANTY PERIOD
This warranty continues for a period of two (2) years and applies only to the repair,
replacement or adjustment of the component parts that are not scheduled for replacement
as required maintenance. Further, component parts which are scheduled only for regular
inspection to the effect of "repair or replace as necessary" are warranted for the warranty
period. Any warranted part which is scheduled for replacement as required maintenance is
warranted for the period of time up to the first scheduled replacement point for that part.
3. DIAGNOSIS
You will not be charged for diagnostic labor that leads to the determination that a warranted
part is defective, if the diagnostic work is performed at an authorized service dealer or
warranty station.
4. DAMAGES
If a warranted part failed causing damage to other engine components, consult an
warranty station.
D. WHAT IS NOT COVERED
1. This limited warranty does not cover any part which malfunctions, fails or is damaged due
to failure to follow the maintenance and operating instructions set forth in the 2005 and
later Owner's Manual including:
(1) improper maintenance of any warranted parts
(2) improper installation, adjustment or repair of the engine or of any warranted part unless
performed by an authorized service dealer
(3) failure to follow recommendations on fuel use contained in the 2005 and later Owner's
Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
(4) repairs performed outside of the authorized warranty service dealers
(5) use of parts which are not authorized by FUJI.
2. Add-on or modified parts
This warranty does not cover any part that malfunctions, fails or is damaged due to alter-
ations by changing, adding to or removing parts from the engine.
3. Expenses incurred by processing warranty claims
FUJI, any authorized service dealer and warranty station shall not be liable for any loss
of use of the engine, for any alternative usage, for any damage to goods, loss of time or
inconvenience.
E. HOW TO FILE A CLAIM
All repairs qualifying under this Limited Warranty must be performed by a dealer who sold you
the engine or warranty station authorized by ROBIN AMERICA. In the event that any emission-
related part is found to be defective during the warranty period, you must notify the Robin
America Inc. Customer Service Department at 1-630-350-8200 and you will be advised of the
appropriate warranty service facilities where the warranty repair is to be performed.
F. WHERE TO OBTAIN WARRANTY SERVICE
It is recommended that warranty service be performed by the authorized dealer who sold you
the engine, although warranty service will be performed by any authorized service dealers or
warranty stations anywhere in the United States. When warranty repair is needed, the engine
must be brought to an authorized service dealer or warranty station's place of business during
normal business hours. In all cases, a reasonable time, not to exceed 30 days, must be
allowed for the warranty repair to be completed after the engine is received by the authorized
service dealer or warranty station.
G. MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS
Only warranted engine replacement parts approved by FUJI should be used in the perfor-
mance of any warranty maintenance or repairs on emission-related parts. If other than autho-
rized parts are used for maintenance, replacement or repair of components affecting emission
control, you should assure yourself that such parts are warranted by their manufacturer to be
equivalent to authorized parts in performance and durability. FUJI ,however, assumes no liabil-
ity under this warranty with respect to parts other than authorized parts. The use of non-autho-
rized replacement parts does not invalidate the warranty on other components unless the non-
authorized parts cause damage to warranted parts.
H. PARTS COVERED UNDER THE CALIFORNIA EMISSIONS WARRANTY
(1) Fuel Metering System
(i) Carburetor and internal parts (and/or pressure regulator or fuel injection system).
(ii) Air/fuel ratio feedback and control system, if applicable.
(iii) Cold start enrichment system, if applicable.
(iv) Regulator assy (gaseous fuel, if applicable)
(2) Air Induction System
(i)Intake manifold, if applicable
(ii)Air filter.
(3) Ignition System
(i)Spark plugs.
(ii)Magneto or electronic ignition system.
(iii)Spark advance/retard system, if applicable.
(4) Exhaust manifold, if applicable
Download from Www.Somanuals.com. All Manuals Search And Download.
(5) Miscellaneous Items Used in Above Systems
(i)Electronic controls, if applicable
(ii)Hoses, belts, connectors, and assemblies.
(iii) Filter lock assy (gaseous fuel, if applicable)
I. MAINTENANCE STATEMENTS
It is your responsibility to have all scheduled inspection and maintenance services performed at
the times recommended in the 2005 and later Owner's Manual and to retain proof that inspection
and maintenance services are performed at the times when recommended. FUJI will not deny a
warranty claim solely because you have no record of maintenance; however, FUJI may deny a
warranty claim if your failure to perform required maintenance resulted in the failure of warranted
part. The proof which you maintain should be given to each subsequent owner of the engine.
You are responsible for performing the scheduled maintenance described below based on the
procedures specified in the 2005 and later Owner's Manual. The scheduled maintenance below
is based on a normal engine operating schedule.
PROCEDURE
INTERVAL
1) Change engine oil
: Initial 20 hours and every 100 hours afterward
: Every 50 hours
2) Clean air cleaner (element)
3) Replace air cleaner element
: Every 200 hours
4) Clean and adjust spark plug and electrodes : Every 200 hours
Note : More frequent maintenance may be necessary under dusty, dirty or severe conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
FOREWORD
Thank you very much for purchasing a ROBIN ENGINE.
Your ROBIN ENGINE can supply the power to operate various
sorts of machines and equipment.
Please take a moment to familiarize yourself with the proper
operation and maintenance procedures in order to maximize
the safe and efficient use of this product.
Due to constant efforts to improve our products, certain proce-
dures and specifications are subjected to change without
notice.
When ordering spare parts, always give us the MODEL,
SPECIFICATION and SERIAL NUMBER of your engine.
Please fill in the following blanks after checking the specifica-
tion number on your engine.
SPEC NO.
E H
SERIAL NO.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
・・・・・・・・・・・・・・・・・・・・・・・・・・・・
1.SAFETY PRECAUTIONS
1
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
2. COMPONENTS
4
・・・・・・・・・・・・・・・・・・・・・・・・・・
3. PRE-OPERATION CHECKS
4. OPERATING YOUR ENGINE
5. EASY TROUBLESHOOTING
6. MAINTENANCE SCHEDULE
7. "HOW-TO" MAINTENANCE
8. PREPARATIONS FOR STORAGE
7
・・・・・・・・・・・・・・・・・・・・・・・・・
8
・・・・・・・・・・・・・・・・・・・・・・・・・
10
・・・・・・・・・・・・・・・・・・・・・・・・・
11
・・・・・・・・・・・・・・・・・・・・・・・・・・
13
・・・・・・・・・・・・・・・・・・・・・
17
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
18
9. SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMBOLS
Read the owner's manual.
Stay clear of the hot surface.
Exhaust gas is poisonous.
Do not operate in an unventilated area.
Stop the engine before refueling.
Fire, open flame and smoking prohibited.
Plus ;
positive polarity
On (Run)
Off (Stop)
Engine oil
Add oil
Battery
Engine start
(Electric start)
Download from Www.Somanuals.com. All Manuals Search And Download.
1. SAFETY PRECAUTIONS
Please make sure you review each precaution carefully.
Pay special attention to statement preceded by the following words.
WARNING “WARNING” indicates a strong possibility of severe personal injury or loss
of life if instructions are not followed.
CAUTION “CAUTION” indicates a possibility of personal injury or
equipment damage if instructions are not followed.
WARNING : EXHAUST PRECAUTIONS
■
■
Never inhale exhaust gasses.
They contain carbon monoxide, a colorless, odorless and extremely
dangerous gas which can cause unconsciousness or death.
Never operate the engine indoors or in a poorly ventilated area, such as
tunnel, cave, etc.
■
■
Exercise extreme care when operating the engine near people or animals.
Keep the exhaust pipe free of foreign objects.
WARNING : REFUELING PRECAUTIONS
■
■
■
■
Gasoline is extremely flammable and its vapors can explode if ignited.
Do not refuel indoors or in a poorly ventilated area.
Be sure to stop the engine prior to refueling.
Do not remove fuel tank cap nor fill fuel tank while engine is hot or running.
Allow engine to cool at least 2 minutes before refueling.
■
■
Do not overfill the fuel tank.
If fuel is spilt, wipe it away carefully and wait until the fuel has dried before
starting the engine.
■
After refueling, make sure that the fuel cap is secured to prevent spillage.
WARNING : FIRE PREVENTION
■
■
■
Do not operate the engine while smoking or near an open flame.
Do not use around dry brush, twigs, cloth rags, or other flammable materials.
Keep cooling air intake (recoil starter area) and muffler side of the engine at least
1 meter (3 feet) away from buildings, obstructions and other burnable
objects.
1m
■
Keep the engine away from flammables and other hazardous materials
(trash, rags, lubricants, explosives).
1m
-
1
-
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING : OTHER SAFETY PRECAUTIONS
■
Place the protective covers over the rotating parts.
If rotating parts such as the drive shaft, pulley, belt, etc. are left exposed,
they are potentially hazardous. To prevent injury, equip them with protective
covers or shrouds.
■
Be careful of hot parts.
The muffler and other engine parts become very hot while the engine is
running or just after it has stopped. Operate the engine in a safe area and
keep children away from the running engine.
■
■
Do not touch the spark plug and ignition cable when starting and operating
the engine.
Never make adjustments on the machinery while it is connected to the
engine, without first removing the ignition cable from the spark plug. Turn-
ing the crankshaft by hand during adjusting or cleaning might start the
engine, and cause serious injury to the operator.
■
Operate the engine on a stable, level surface.
If the engine is tilted, fuel spillage may result.
NOTE
Operating the engine at a steep incline may cause seizure due to
improper lubrication even with a maximum oil level.
■
■
Do not transport the engine with fuel in tank or with fuel strainer cock open.
Do not move the engine while in operation when it has been removed from
the equipment.
■
Keep the unit dry (do not operate it in rainy conditions).
-
Download from Www.Somanuals.com.2All Manuals Search And Download.
-
CAUTION : PRE-OPERATION CHECKS
■
■
Carefully check fuel hoses and joints for looseness and fuel leakage.
Leaked fuel creates a potentially dangerous situation.
Check bolts and nuts for looseness. A loose bolt or nut may cause serious
engine trouble.
■
■
■
■
Check the engine oil and refill if necessary.
Check the fuel level and refill if necessary. Take care not to overfill the tank.
Keep cylinder fins and recoil starter free of dirt, grass and other debris.
Wear snug fitting working clothes when operating the engine.
Loose aprons, towels, belt, etc., may be caught in the engine or drive train,
causing a dangerous situation.
-
3
-
Download from Www.Somanuals.com. All Manuals Search And Download.
2. COMPONENTS
EH025
Plug cover
Air cleaner
Stop switch
Clutch
Fuel tank cap
P.T.O. Shaft
Fuel tank
A Type
P Type (Pump)
Choke lever
Carburetor
Muffler
Primer pump
Oil gauge
(
)
Oil filler
Starter handle
Recoil starter
Engine serial No.
-
Download from Www.Somanuals.com.4All Manuals Search And Download.
-
EH035
Plug cover
Air cleaner
Clutch
Fuel tank cap
Fuel tank
P.T.O. Shaft
A Type
Carburetor
P Type (Pump)
Choke lever
Primer pump
Muffler
Starter
handle
Oil gauge
(Oil filler)
Recoil starter
-
5
-
Download from Www.Somanuals.com. All Manuals Search And Download.
EH035V
Fuel tank cap
Fuel
upper level
Oil
upper level
Fuel tank
Oil drain screw
Spark plug
(Plug cap)
Muffler
Carburetor
Choke lever
Primer pump
Starter
handle
Air cleaner
Oil gauge
(Oil filler)
Clutch
Fuel tank
Fuel tank cap
Recoil starter
-
Download from Www.Somanuals.com.6All Manuals Search And Download.
-
3. PRE-OPERATION CHECKS
CHECK ENGINE OIL
Before checking or refilling engine oil, be
sure the engine is located on a stable, level
surface and stopped.
Oil gauge
■
Do not thread the gauge into oil filler to
check oil level.
Upper level
■
If the oil level is below the lower level
line on the dipstick, refill with the proper
oil (see table) up to the upper level (up to
the point of overflowing the filler neck).
Lower level
OIL CAPACITY････EH025 : 80 mL
5W
EH035 : 100 mL
10W
■
■
■
■
(EH035V) Before filling oil, make sure that
the oil drain screw is secured thoroughly.
20W
#20
Single
grade
Change oil if it is contaminated.
(See page 11 Maintenance Schedule.)
#30
Use class SF (API classification) or
higher grade oil.
#40
10W-30
Multi
grade
If multi-grade oil is employed, oil
consumption tends to increase when
the ambient temperature is high.
10W-40
-20 -10
-4 14
0
10
50
20
68
30 40
86 104
Ambient
temperature
■
32
Wipe off any spilled oil before starting
the engine.
CHECK FUEL
CAUTION
Do not refuel while smoking, near an
open flame or other potential hazards.
■
■
Stop the engine and open the cap.
Incline the engine as fuel inlet upward,
then refill fuel to the upper level. Do
not fill fuel too much.
■
Use automotive unleaded gasoline only.
This engine is 4-stroke gasoline engine.
This engine is certified to operate on
automotive unleaded gasoline.
■
■
-
When filling the fuel tank, always use
the fuel filter.
Wipe off any spilled fuel before starting
the engine.
-
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. OPERATING YOUR ENGINE
STARTING
STOP SWITCH
PRIMER PUMP
1
3
ON
ON
OFF
■
■
Set the throttle lever to the idling
position.
If the stop switch is installed on the
engine.Set the stop switch to the
position "ON or I ".
Push the primer pump 7 to 10 times
to feed the fuel to the carburetor.
■
If the stop switch is installed on a
machine side.Set the stop switch to
the position "ON or I ".
CHOKE LEVER
RECOIL STARTER
4
2
■
Pull the starter handle slowly, until
resistance is felt.
This is the "compression" point.
Return the handle to its original
position and pull swiftly.
Close the choke lever.
■
If the engine is cold or the ambient
temperature is low, close the choke
lever fully.
■
Do not pull out the rope all the way.
■
After starting the engine, allow the
■
If the engine is warm or the ambient
starter handle to return to its origi-
nal position while still holding the
handle.
temperature is high, open the
choke lever half-way, or keep it
fully open.
-
Download from Www.Somanuals.com.8All Manuals Search And Download.
-
STOPPING
STOP SWITCH
CHOKE LEVER
1
5
ON
OFF
OFF
■
Set the throttle lever at the low
speed position and allow the engine
to run at low speed for 2 or 3
minutes before stopping.
■
■
If the stop switch is installed on the
engine.Set the stop switch to the
position "OFF or O ".
■
■
After starting the engine, gradually
open choke by turning the choke
lever and finally keep it fully
opened.
If the stop switch is installed on a
machine side.Set the stop switch to
the position "OFF or O ".
Do not fully open the choke lever
immediately when the engine is
cold or the ambient temperature is
low, because the engine may stop.
RECOIL STARTER
2
RUNNING
Allow the engine to warm up with-
out load for a few minutes.
Gradually move the throttle lever
toward the high speed position
and set it at the required engine
speed.
■
Pull the starter handle slowly and
return the handle to its original posi-
tion when resistance is felt.
NOTE :
NOTE :
If the engine is operated at upside
down, white smoke may be
exhausted from the muffler.
The above operation is necessary to
prevent outside moist air from intrud-
ing into the combustion chamber.
-
9
-
Download from Www.Somanuals.com. All Manuals Search And Download.
5. EASY TROUBLESHOOTING
WHEN ENGINE DOES NOT START:
■
Perform the following checks before you take
the engine to your Robin dealer.
■
If you still have trouble after completing the checks,
take the engine to your nearest Robin dealer.
Is the engine switch set ON?
Is there enough compression?
1. Pull the starter handle slowly and check if
resistance is felt.
2. If little force is required to pull the starter handle,
check if the spark plug is tightened firmly.
3. If the spark plug is loose, tighten it.
Is the spark plug wet with gasoline?
1. Choke (close choke lever) and pull the starter
handle five or six times.
Remove the plug and check if its electrode is wet. If the
electrode is wet, fuel is well supplied to your engine.
2.When the electrode is dry, check where the fuel stops.
(Check the fuel intake of the carburetor and fuel
strainer intake.)
3. In case the engine does not start with well
supplied fuel, try using fresh fuel.
Is there a strong spark across the electrode?
WARNING
Wipe out spilled fuel carefully before checking.
Place spark plug as far away from spark plug
hole as possible.
Do not hold spark plug by hand while checking.
1. Remove the spark plug and connect it to the plug cap.
Pull the starter handle while grounding spark plug
against engine body using an insulated pliers.
2. Try with a new spark plug if the spark is weak or
there is no spark.
3. The ignition system is faulty if there is no spark
with a new spark plug.
Take your engine to your nearest Robin dealer.
-
10
-
Download from Www.Somanuals.com. All Manuals Search And Download.
6. MAINTENANCE SCHEDULE
MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES
AND SYSTEMS MAY BE PERFORMED BY ANY NON-ROAD ENGINE REPAIR
ESTABLISHMENT OR INDIVIDUAL.
DAILY INSPECTION
Before running the engine, check the following service items.
Excessive vibration,noise
Clean air cleaner element
Safe surroundings
Enough gasoline
Enough clean engine oil
Leakage of gasoline and engine oil
Loose or broken bolts and nuts
PERIODIC MAINTENANCE
Periodic maintenance is vital to safe and efficient operation of your engine.
Check the table below for periodic maintenance intervals.
IT IS ALSO NECESSARY FOR THE USER OF THIS ENGINE TO CONDUCT
THE MAINTENANCE AND ADJUSTMENTS ON THE EMISSION-RELATED
PARTS LISTED BELOW TO KEEP THE EMISSION CONTROL SYSTEM
EFFECTIVE.
The emission control system consists of the following parts:
(1) Carburetor and internal
parts
(4) Air cleaner element
(5) Fuel Filter
(9) Hoses and sealing
gaskets, belts, connec-
tors, and assemblies
(2) Air cleaner plate
(including choke
sysyem)
(6) Spark plug
(7) Flywheel magneto
(8) Ignition coil
(3) Air cleaner cover
The maintenance schedule indicated in the following table is based on the normal
engine operation. Should the engine be operated in extremely dusty condition or in
heavier loading condition, the maintenance intervals must be shortened depending
on the contamination of oil, clogging of filter elements, wear of parts, and so on.
-
Download from Www.Somanuals1.c1om. All Manuals Search And Download.
-
Periodic Maintenance Schedule table
Every 8 hours
(daily)
Every
50 hours
Every
200 hours
Maintenance Items
Clean engine and check bolts and nuts
Check and refill engine oil
● (Daily)
● (Refill daily
up to upper level)
Clean air cleaner
●
(Initial 20 hours)
Change engine oil (*Note 1)
Clean spark plug
●
●
●
Clean fuel filter
Clean and adjust spark plug and electrodes
Clean and adjust carburetor
Check and adjust valve clearance (*Note 2)
Clean fuel tank
●
●
●
●
●
Overhaul engine if necessary (*Note 2)
*Note 1 : Initial oil change should be performed after first twenty (20) hours of operation.
Thereafter change oil every fifty (50) hours.
Before changing oil, check for a suitable way to dispose of old oil.
Do not pour it down into sewage drains, onto garden soil or into open streams.
Your local zoning or environmental regulations will give you more detailed
instructions on proper disposal.
*Note 2 : As to the procedures for these items, please refer to the SERVICE MANUAL or
consult your nearest Robin service dealer.
NOTE : Replace rubber hoses for passage every one year. If and when fuel leakage is
found, replace hose at once.
-
12
-
Download from Www.Somanuals.com. All Manuals Search And Download.
7. "HOW-TO" MAINTENANCE
INSPECTING THE SPARK
PLUG
■
■
■
Clean off carbon deposits on the
spark plug electrode using a plug
cleaner or wire brush.
Check electrode gap.
Adjust gap 0.7 mm to 0.8 mm
(0.03 inches)
0.7 to 0.8 mm
(0.03 in.)
Use a proper spark plug :
NGK CMR6A
ENGINE OIL CHANGE
■
■
■
■
Initial oil change
After 20 hours of operation
Thereafter
Every 50 hours of operation
Refer to the recommended oil table
on page 7.
Always use the best grade and clean
oil. Contaminated oil, poor quality oil
and shortage of oil cause damage to
engine or shorten the engine life.
OIL CAPACITY････EH025 : 80 mL
EH035 : 100 mL
CAUTION
Make sure the fuel cap is tightly
secured to avoid spillage.
1) Remove the oil gauge.
Be cautious to place the oil gauge in
a place where it will not gather dirt,
dust or other foreign matter.
2) Place a cloth or paper towel to the
area around the oil filler hole.
-
Download from Www.Somanuals1.c3om. All Manuals Search And Download.
-
3) Remove the oil gauge, then tilt the
engine and drain the oil into a pan or
other receptacle.
(EH035V) Remove the oil drain
screw and drain the oil.
4) Put the engine on a level surface,
then fill with the oil up to the point of
overflowing the filler neck. Pour the
oil in from a squeeze bottle or other
appropriate.
5) After filling the engine with oil, rein-
sert the oil gauge. Ensure that the oil
gauge is tight, as if it loosens later oil
will leak out.
ADJUSTING CARBURETOR
Adjusting idling rpm
When adjust screw is turned right,
engine rpm increases, and when it is
turned left, rpm decreases.
(Refer to illustration.)
Normal idling rpm
3000±100rpm
NOTE:
The carburetor greatly affects the
performance of the engine.
Since it has been adjusted carefully
at our factory before shipment, avoid
adjusting unless absolutely neces-
sary.
If adjustments are needed, contact
your nearest dealer.
-
14
-
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING FUEL FILTER
Remove the hose clamp and pull out
the fuel filter from fuel pipe.
Wash the fuel filter with kerosene.
After washing, reassemble it.
If the fuel filter is heavy dirty, replace it
with new one.
EH025
CLEANING AIR CLEANER
Dirty air cleaner element will cause
starting difficulty, power loss, engine
malfunctions, and shorten engine life
extremely. Keep the air cleaner
element clean.
Choke lever
Place so that the
cutout is here (top left)
Element
■
■
■
Remove the fixing bolt of air cleaner
cover.
Breather
Air cleaner cover
Pull out the lower edge of the cover
to remove the air cleaner cover.
Place the choke lever to the fully
closed position, taking care to ensure
that dust and dirt are not allowed to
enter the carburetor.
Fixing bolt
(
)
Line the slash mark
■
Remove the element, then clean it
with a solution of warm water and a
mild detergent, thoroughly drying it
afterward. Install it in alignment with
the lines as shown in illustration.
■
■
Wipe off any oil adhering to the area
around the air cleaner cover and
breather with a cloth.
(
)
Element the dotted line
EH035
Choke lever
After cleaning, reassemble the
cleaner cover (insert the tab at the
top first, then insert the bottom tab)
and tighten the fixing bolt.
Element
Breather
Air cleaner cover
Fixing bolt
-
Download from Www.Somanuals1.c5om. All Manuals Search And Download.
-
CHECKING BOLTS, NUTS
AND SCREWS
Retighten loose bolts and nuts.
Check for fuel and oil leaks.
Replace damaged parts with new ones.
Keep safety in your mind.
FUEL PIPE REPLACEMENT
Replace the fuel pipe every 1 year.
If the fuel leakage is found on the fuel
pipe, replace it immediately.
-
16
-
Download from Www.Somanuals.com. All Manuals Search And Download.
8. PREPARATIONS FOR STORAGE
DISCHARGE FUEL
(NO SMOKING !)
In case the engine is not going to be
used for more than one month,
discharge fuel thoroughly from fuel tank
and carburetor in order to prevent from
hard starting and/or poor engine opera-
tion due to deteriorated fuel when you
use the engine next time.
■
Pour out the fuel in the tank from its
filler neck.
■
Push the primer pump of the carbure-
tor until the fuel in it is thoroughly
discharged.
ENGINE OIL
■
Change the engine oil with fresh oil.
■
Remove the spark plug, pour about 2
cc engine oil into the cylinder, slowly
pull the starter handle of the recoil
starter 2 or 3 times, and tighten the
spark plug.
CLEAN AND STORE
■
Slowly pull the recoil starter handle
until resistance is felt and leave it in
that position.
■
Clean the engine thoroughly with an
oiled cloth, put the cover on and
store the engine indoors in a well-
ventilated, low humidity area.
-
Download from Www.Somanuals1.c7om. All Manuals Search And Download.
-
9. SPECIFICATIONS
MODEL
EH025A
EH025P
EH035A
EH035P
EH035V
Air-Cooled, 4-Stroke, Single Cylinder, Overhead valve,
Gasoline Engine
Type
Bore x Stroke in.(mm)
Displacement cu. in. (cm3)
1.34 x 1.06 (34 x 27)
1.49 (24.5)
1.54 x 1.10 (39 x 28)
2.04 (33.5)
Maximum Output
kW (HP) / rpm
0.81 (1.1) / 7000
1.18 (0.12)/ 5000
1.18 (1.6) / 7000
1.76 (0.18)/ 5000
Maximum Torque
N・m (kgf・m)/ rpm
Direction of Rotation
Counterclockwise as viewed from P.T.O. shaft side
Automobile Engine Oil SAE #20, #30 or 10W-30 ;
Class SF or higher grade
Lubricant
Capacity of Lubricant
Carburetor
mL
80
100
Diaphragm type
Automotive unleaded gasoline
Fuel
Fuel Consumption Ratio
At Continuous Rated Output
408 (300)
0.5
340 (250)
g/kw・h (g/HP・h)
Fuel Tank Capacity
Spark plug
L
0.65
NGK CMR6A (M10 xP1.0)
Recoil starter
0.75
Starting System
Dry Weight
lb. (kg) 6.17 (2.8)
6.61 (3.0)
7.72 (3.5)
8.48 (3.85)
7.50 (3.4)
Dimension (L x W x H)
in.(mm)
6.50 x 8.39 x 8.86 8.62 x 8.39 x 8.86
(165 x 213 x 225) (219 x 213 x 225)
7.52 x 9.21 x 9.72 9.96 x 9.21 x 9.72 7.52 x 8.67 x 10.28
(191 x 234 x 247) (253 x 234 x 247) (191 x 220 x 261)
Valve Clearance
(Intake & Exhaust)
0.0059 in. (0.15 mm)
Note : Adjust the valve clearance while the engine is cold.
Emissions Durability
Period
125 hours
300 hours
(California only)
For handheld engines : The Emissions Compliance Period referred
to on the Emissions Compliance label indicates the number of
operating hours for which the engine has been shown to meet
Federal emission requiremants.
Emissions Compliance Period
(Except the State of California)
Category C=50 hours, B=125 hours, and A=300 hours.
-
18
-
Download from Www.Somanuals.com. All Manuals Search And Download.
ISSUE EMD-EU2089
PRINTED IN JAPAN
March 2005 CE-
Download from Www.Somanuals.com. All Manuals Search And Download.
|