Sub Zero Ventilation Hood I663418R User Manual

Planning Information  
Model I663418(R) Pro Island Hood  
Hand finished crafts-  
manship  
Classic stainless  
steel finish  
Decorative rail  
(optional)  
Backdraft damper  
Model I663418  
Stainless steel  
baffle filters  
Model I663418R  
Rail Option  
Welded seams  
and hemmed edges  
Recessed easy  
access controls  
Halogen lighting  
Infinite speed  
blower control  
Model I663418R shown with standard classic stainless steel decorative  
rails, platinum rails available as a sales accessory  
A
Wolf Pro island hood the final touch to complete  
Wolf Pro island hoods are available in  
the classic stainless steel finish. Rail  
option hoods (R) come with classic stain-  
less steel decorative rails and stand-offs  
for both sides of the hood. Optional  
platinum rails match dual fuel range  
bezels. Pro island hoods are sold as a  
shell only; internal, in-line and remote  
blower options are available.  
your stage featuring professional cooking equipment.  
This premier ventilation system complements your  
cooking appliance of choice, guaranteeing you’ll look  
the part, no matter what new cooking challenges you  
take on.  
This 66" (1676) wide island hood is 34" (864) deep and  
available in the classic stainless steel finish. You also  
have the option of decorative rails. While classic stain-  
less steel rails are standard on the (R) model, platinum  
rails are also available to match the bezels of our dual  
fuel ranges and sealed burner rangetops.  
The Pro island hoods are recommended for use with all  
Wolf cooking appliances.  
Dimensions in parentheses are in  
millimeters unless otherwise specified.  
1
9/06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Planning Information  
Model I663418(R) Pro Island Hood  
B L O W E R O P T I O N S  
S P E C I F I C A T I O N S  
Overall Width of Hood  
Overall Height of Hood  
1200 CFM Internal Blower  
1100 CFM In-Line Blower  
1200 CFM Remote Blower  
1500 CFM Remote Blower  
Refer to the Pro Ventilation  
804703  
808332  
801642  
804701  
66" (1676)  
18" (457)  
Overall Depth of Hood – I663418  
I663418R (including rails)  
34" (864)  
38" (965)  
Duct Size  
10" (254) Round  
Vertical  
Recommendations chart at the end  
of this section.  
Discharge  
Electrical Supply Requirements  
110/120 V AC, 60 Hz  
15 amp dedicated circuit  
A C C E S S O R I E S  
Shipping Weight (shell only)  
168 lbs (76 kg)  
Platinum decorative rails and  
stand-offs for both sides of the  
hood  
Specifications are subject to change without notice.  
6" (152) and 12" (305) duct  
covers  
Contact your Wolf dealer for additional  
information on accessories.  
Dimensions in parentheses are in  
millimeters unless otherwise specified.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Planning Information  
Model I663418(R) Pro Island Hood  
I N S T A L L A T I O N S P E C I F I C A T I O N S  
LOCATION OF ELECTRICAL SUPPLY  
CENTERED THROUGH TOP OF HOOD  
18" (457)  
HEIGHT  
OF HOOD  
66" (1676)  
WIDTH OF HOOD  
34" (864)  
DEPTH OF HOOD  
30" TO 36"  
(762–914)  
30" TO 36"  
(762–914)  
TO COUNTERTOP  
TO COUNTERTOP  
D I M E N S I O N S  
Overall Width of Hood  
66" (1676)  
Overall Height of Hood  
18" (457)  
34" (864)  
Overall Depth of Hood (excluding rails)  
Countertop to Bottom of Hood  
Location of Electrical  
30" (762) to 36" (914)  
Centered through top of hood  
See Installation Instructions shipped with unit for detailed specifications.  
Dimensions in parentheses are in  
millimeters unless otherwise specified.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Planning Information  
Model I663418(R) Pro Island Hood  
I N S T A L L A T I O N N O T E S  
Refer to the illustrations and specifications  
for overall dimensions and installation specifics.  
Pro island hoods require a separate,  
grounded 110/120 V AC, 60 Hz power supply.  
The service should have its own 15 amp circuit  
breaker. Placement of the electrical supply is  
not critical, as long as you provide a minimum  
of 6" (152) of 120 V AC, 60 Hz power cable.  
Location of electrical is centered through the  
top of the hood as shown in the Installation  
illustration on page 4.  
Wolf Pro island hoods are recommended for  
use with any Wolf cooking appliance. The hood  
must overlap the cooking surface by a minimum  
of 3" (76) on either side.  
Installation of all Pro island hoods should be  
30" (762) to 36" (914) from the bottom of the  
hood to the countertop. Follow the dimensions  
shown in the Installation illustration.  
You must follow all National Electrical Code  
regulations. In addition, be aware of local codes  
and ordinances when installing your service.  
Wolf Pro island hoods are shipped without a  
blower assembly. Internal, in-line and remote  
blower assemblies are available. Blower options  
also vary with the volume of air that needs to  
be moved and the length of the duct run. Refer  
to the charts at the end of this section for Pro  
ventilation recommendations and blower  
options.  
Refer to the installation instructions shipped  
with each Wolf product for detailed specifica-  
tions. This information can also be found on  
our website, wolfappliance.com.  
IMPORTANT NOTE: Install this ventilation hood  
only with a Wolf blower.  
Dimensions in parentheses are in  
millimeters unless otherwise specified.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Planning Information  
Model I663418(R) Pro Island Hood  
D U C T I N G C O N S I D E R A T I O N S  
Pro island hoods are shipped without the blower  
assembly. Internal, in-line or remote blower  
assemblies are available.  
IMPORTANT NOTE: Install these ventilation  
hoods only with a Wolf blower.  
Refer to the Pro ventilation charts at the end of  
this section for recommendations and blower  
options.  
Wolf Pro island hoods have a vertical discharge  
location as shown in the illustration below.  
Ducting considerations for  
Pro island hoods.  
DUCTWORK INSTALLATION  
THROUGH ROOF  
ROOF CAP OR REMOTE BLOWER  
10" ROUND DUCT  
TRANSITION  
141/8"W x 9"D TO 10" ROUND  
11"H (INCLUDING FLANGES)  
SOFIT, CABINET OR  
DUCT COVER  
VERTICAL  
DISCHARGE  
18" (457)  
HEIGHT OF HOOD  
ISLAND HOOD  
34" (864)  
DEPTH OF HOOD  
30" TO 36"  
(762–914)  
COUNTERTOP  
TO BOTTOM OF  
VENTILATION HOOD  
36" (914)  
STANDARD  
FLOOR TO  
COUNTERTOP  
HEIGHT  
VERTICAL DISCHARGE ONLY FOR ISLAND HOODS.  
Dimensions in parentheses are in  
millimeters unless otherwise specified.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Planning Information  
Wolf Ventilation Recommendations  
W O L F B L O W E R A S S E M B L I E S  
A ventilation system must include a blower  
assembly. With a few exceptions where internal  
blowers are included, Wolf ventilation hoods and  
downdrafts are shipped without the blower  
assembly. An internal, in-line or remote blower  
assembly must be selected to accommodate the  
cooking appliance, CFM requirements and home-  
owner preferences. Internal, in-line and remote  
blower assemblies are available as sales acces-  
sories through your Wolf dealer.  
IMPORTANT NOTE: Use only a Wolf blower  
with all Wolf ventilation products.  
Internal blowers are mounted inside the hood  
canopy or downdraft blower box. In-line blowers  
are mounted in between the hood and the  
exterior of the home. Remote blowers can be  
mounted on the roof or in some cases, on an  
exterior wall. Refer to the illustrations below for  
dimensions of Wolf in-line and remote blowers.  
Ventilation recommendation charts on the  
Wolf internal, in-line and remote blowers are for  
use with Wolf cooktop hoods, downdraft  
systems and Pro ventilation hoods and hood  
liners.  
following pages provide minimum CFM recom-  
mendations according to the cooking appliance  
and ventilation system used and blower options  
for each specific ventilation hood or downdraft.  
7
24 /8"  
3
24 /8"  
(632)  
(619)  
3
11 /4"  
(298)  
18"  
12"  
(457)  
1
(305)  
18 /2"  
(470)  
1
4 /2"  
(114)  
8"  
(203)  
1
21 /2"  
1
(546)  
22"  
12 /4"  
(311)  
18"  
(559)  
(457)  
In-line BLOWER-60IL  
In-line BLOWER-110IL  
18" (457)  
21" (533)  
3
20 /4"  
10"  
10"  
(527)  
(254)  
(254)  
1
1
28 /4"  
29 /2"  
1
29 /2"  
(749)  
(718)  
(749)  
10" (254)  
Diameter  
10" (254)  
Diameter  
10" (254)  
Diameter  
1
3
15 /2"  
(394)  
3
14 /4"  
(375)  
14 /4"  
(375)  
1
1
29 /2"  
1
29 /2"  
24 /2"  
(749)  
(749)  
(622)  
1
3
14"  
10 /8"  
10 /8"  
(356)  
(257)  
(264)  
3
4
/4"  
3
(121)  
24 /4"  
(629)  
1
7
1
7
22"  
25"  
/4"  
/4"  
(559)  
(635)  
(184)  
(184)  
Remote BLOWER-60REM and  
BLOWER-90REM  
Remote BLOWER-120REM  
Remote BLOWER-150REM  
Dimensions may vary by 1/8" (3).  
Dimensions in parentheses are in  
millimeters unless otherwise specified.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Planning Information  
Wolf Ventilation Recommendations  
P R O V E N T I L A T I O N C F M R E C O M M E N D AT I O N S  
Pro Island Hoods  
I363418  
I423418  
600  
I543418  
I663418  
DF304 / R304 / SRT304  
DF366 / R366 / SRT366 / RT366  
DF364 / R364 / SRT364 / RT364  
RT362  
600  
900  
900  
900  
R488 / RT488  
1100  
1100  
900  
DF486 / R486 / SRT486 / RT486  
DF484 / R484 / SRT484 / RT484  
R482 / RT482  
900  
DF606 / R606  
1500  
1500  
DF604 / R604  
Model numbers for dual fuel ranges, gas ranges, sealed burner rangetops and gas rangetops indicate width and number of surface  
burners. Features such as a charbroiler, griddle and/or French Top will vary.  
CFM recommendations are based on total Btu/hr output. Wolf recommends 1 CFM per 100 Btu/hr (.03 kW). Additional CFM may be  
required for long duct runs.  
P R O V E N T I L A T I O N B L O W E R O P T I O N S  
Pro Island Hoods  
Blower Description  
1200 CFM Internal  
1100 CFM In-Line  
900 CFM Remote  
1200 CFM Remote  
1500 CFM Remote  
Blower Number  
Island Hood Models  
All Island Hoods  
IBLOWER-120INT (804703)  
BLOWER-110IL (808332)  
BLOWER-90REM (801641)  
BLOWER-120REM (801642)  
BLOWER-150REM (804701)  
All Island Hoods  
I363418 / I423418 / I543418  
All Island Hoods  
All Island Hoods  
Vertical discharge with 10" (254) round duct.  
Island hood models without decorative rails listed; blower options are the same for (R) models. Transition with backdraft damper  
included with island hoods. Blower configurations are for reference only. Refer to minimum CFM recommendations for your specific  
cooking product. Always consult a qualified HVAC Engineer for specific applications  
Dimensions in parentheses are in  
millimeters unless otherwise specified.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shure Microphone wl183 User Manual
Snapper Lawn Mower 07220 User Manual
Sony Blu ray Player 3 452 779 121 User Manual
Sony Camcorder ILCE 3000 User Manual
Sony Camcorder UM 100 User Manual
Sony Laptop Docking Station SM4000 User Manual
Sony Portable CD Player CFD V6 User Manual
Sony Speaker System WAHT SD1 User Manual
Soundstream Technologies Speaker PXW 10 User Manual
Tanaka Brush Cutter TBC 205 User Manual