Product Specifications Manual
WiFi Ethernet I/F Card
IFBD-HW03/04
Rev. No. 0.00
Star Micronics Co., Ltd.
Special Products Operating Division
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.10. SMTP Specification ................................................................................................................... 3-20
3.3.10.1. Transmission Message Format ....................................................................................... 3-20
3.3.11. Universal Setting Function ....................................................................................................... 3-22
Filter Definition Character String ..................................................................................... 3-19
JCP (Silex-technology’s setting protocol (UDP #19541) ..................................................... 3-23
SNMP Specification................................................................................................................... 3-24
Support MIB........................................................................................................................ 3-24
TRAP Occurrence Phenomenon..................................................................................... 3-31
DIP Switches and LED Specifications .................................................................................... 3-32
Flash ROM Specifications ........................................................................................................ 3-32
Self-Diagnosis Function Specifications .................................................................................. 3-33
General Settings ........................................................................................................................ 3-35
Wireless Settings....................................................................................................................... 3-35
TCP/IP Settings.......................................................................................................................... 3-35
POP3 (Email Reception) Settings........................................................................................... 3-36
Basic Settings..................................................................................................................... 3-36
Account Settings For Each User (User Profile 1 to 4).................................................. 3-36
SMTP (Email Sending) Settings.............................................................................................. 3-36
Basic Settings..................................................................................................................... 3-36
Event to Address Settings ................................................................................................ 3-36
SNMP Settings........................................................................................................................... 3-37
Secure Print Settings ................................................................................................................ 3-37
RAS Counter Settings............................................................................................................... 3-37
Memory Switch Settings........................................................................................................... 3-37
3.6.10. SSL Identification Creation Settings (Web Only) .................................................................. 3-37
Identification Information Settings................................................................................... 3-37
Time Limit Settings............................................................................................................ 3-37
Printer Status Display................................................................................................................ 3-38
System Status Display .............................................................................................................. 3-39
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
1.
Read First
This product is a printer server (I/F card) dedicated to STAR POS printers that conform to wireless
LAN IEEE802.11b. At the time that this specifications manual was created, the following STAR POS
printer was targeted.
TSP743 F/W V6.0 or later
TSP743 will not support this printer driver simply by updating the F/W. Only printers whose
F/W at the time of default shipment is V6.0 or later can be used.
1.1. Main Settings at Product Shipment
The wireless LAN unit and TCP/IP settings which are necessary to use this product are outlined
below. Refer to section “3.6 Setting Display Items” below for details on settings that are not listed
here.
1.1.1. Wireless LAN Unit Default Settings
Wireless Mode AdHoc (Communication not using an access point)
SSID
“STAR-WIFI”
11
Channel
Web Encryption Disabled
WEP Key No setting
*
Set the PC to the above settings when using this product. Once the PC and product are
connected, it is possible to change the settings of this product to those that support the
environment of use, by using a Web browser.
1.1.2. TCP/IP Default Settings
RARP client
Enabled
Enabled
“0.0.0.0”
“0.0.0.0”
DHCP/BOOTP client
IP address
Subnet mask
Default gateway “0.0.0.0”
DNS Primary Server
“0.0.0.0”
DNS Secondary Server “0.0.0.0”
1.1.3. Operator Permission Log-in Password Default Settings
To change settings on this product, use WEB, TELNET and FTP protocols. However, when doing so,
it is necessary to log-in to this product with an account having operator permission.
Account information is shown below.
Operator account name:
“root”
Password
“” Nothing needs to be input.
It is possible to change the password after logging in.
1.1.4. Setting the IP Addresses
It is possible to set the IP address for this product using one of four types of methods. They are
RARP, DHCP, ARP or fixed flash memory. When a procedure for setting a multiple of IP address
according to the network environment is effective, the methods above are arranged in order of priority.
For that reason, when using with a fixed IP address written to the flash memory, it is recommended
that it be used after disabling the product’s RARP, and DHCP/BOOTP settings.
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
2.
Hardware
2.1. Supporting Destination for Wireless Units
The wireless frequency bandwidth that can be used with a 2.4 GHz frequency bandwidth used in
IEEE802.11b varies according to the individual regulations of each country. This difference is
supported by having three types of PCB units for each area of use.
The wireless communication channels that can be used with the IEEE802.11b on each PCB for each
country are outlined below.
Also, to identify the destination of the product, a two-digit alphabetical symbol that indicates where
the product is to be used, is inscribed on the Ethernet-MAC address tool.
Country
Communication Channel
IEEE802.11b
1 to 11
Identification
Marks
on
Ethernet-MAC Address Tool
North America
Europe
US
EU
JP
1 to 13
Japan
1 to 14
2.2. Sub-chassis (Brackets Mounted to Printer)
In order for this product to be used with a multiple of POS printer models, there are two types of
bracket shapes mounted to the printer. The following shows the product name for each shape of
bracket.
Applicable Printers
TSP700 Series
Product Name and Model Name
IFBD-HW03
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
2.3. Specifications
Network I/F Unit:
Conforms to IEEE802.11b CF Card Type I and II
LED:
LINK x 1 (green)
Setting Switches:
DIP-SW 2bit
PCB Dimensions (Target):
69 mm x 95 mm (Tolerance: ±0.5 mm)
t = 1.6 mm (Tolerance: ±0.2 mm)
Power Supply: Operating Voltage: 5 V ±5% Rated Consumption Current: 500 mA Max
MTBF Value:
90,000 hours
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
2.4. Environment Conditions
The following outlines the environmental conditions.
Ambient Storage Conditions
Storage Humidity:
Storage Temperature: -20°C to +70°C
20% to 90% (No condensation)
Operating Temperature: 0°C to +55°C
20% to 80% (No condensation)
Ambient Operating Conditions
Operating Humidity:
2.5. Ratings
EMI
FCC
Part15 Class A
VCCI
Class A
Class B
EN55022
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.
Mechanical Specifications
3.1. General Description
This product is a wireless network interface card (printer server) embedded in the Star's POS printer.
The wireless unit conforms to IEEE802.11b specifications.
3.2. Features
•
•
•
Supports the following Star Micronics POS printer.
Supports: TSP743
To supply power from the printer to the adapter, it is not necessary to connect the separate AC
adapter for this adapter.
Incorporated with SSL (Secure Sockets Layer) for printing in secure communications (SSL).
Decrypts encrypted print data and outputs to the printer therefore predate that is protected from
eavesdropping on the network and from falsification.
•
Supports #900 on TCP/IP and print protocols of LPR and IPP. Also, FTP (supporting binary data)
printing is possible.
For that reason, it can be used on many PC operating systems.
Supports Windows98/ME/NT4/2000/XP, LINUX, MAC-OS-X
Sends the printer's ASB status to be read on the PC.
•
•
•
•
A multiple protocols to be used simultaneously.
Supports multi-session printing.
Receives e-mail (POP3 protocols) and outputs them to the printer for printing. (Only supports
text data)
•
•
•
Emails automatically according to status changes, such as printer errors.
Uses flash memory. This enables updating firmware via the network.
Allows monitoring of changes in settings and statuses of the product and printer via each
dedicated setting utility, TELNET, HTTP and FTP.
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3. Protocols
TCP/IP
Network Layers
Transport Layers
Application Layers
ARP, RARP, IP, ICMP
TCP, UDP
BOOTP, DHCP, DNS
LDP, IPP, (Printing Functions)
Raw Mode Print (TCP #9100: Print/Get Print Status)
POP 3, (Text Printing Functions)
SMTP (Supports status notification to 3 locations)
HTTP (Supports English, Japanese printer detail status tables)
FTP (Gets printer status, settings,
Printing, F/W updates)
TELNET (Gets printer status, settings)
UDP/IP
Application Layers
JCP (Silex-technology’s setting protocol (UDP #19541)
SNMP
Others
Embedded with MIB-2, HostResource-MIB, Silex-technology Corporation PrivateMIB
Self-diagnosis printing and setting printing
Easy upgrades using flash memory
3-2
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
TCP/IP Specifications
This product has the following TCP/IP specifications.
•
•
•
•
•
•
•
•
•
IP version 4
IP routing: 1
ICMP Redirect Request
ICMP Echo Request
UDP Maximum Number of Sessions: 8
UDP Maximum Data Gram Length: 2048 octet for both sending and receiveing
UDP Omitted When Sending Check Sum (Normally 0)
TCP Maximum Number of Sessions: 24 (Of these, 1 is used in LISTEN)
TCP Window Size: Maximum 8192 octet for both sending and receiving (Variable using
upper protocols)
The TCP/IP protocol environment is provided with LPD, IPP, Raw Mode Print (TCP #9100) and FTP
for printing, and can use TELNET, HTTP and FTP to change each setting.
Supports TCP/IP printing which is provided as standard with Windows NT/Windows 2000/Windows
XP. Specifications of protocols differ with the normal UNIX for these LPD, so printing is not possible
by spooling to a UNIX server once, such by sending Windows to UNIX to product. Also, because
LPD is not provided in Windows 95, Windows 98 or Windows ME, direct printing is not possible.
However, direct printing is possible by using a tool dedicated to that purpose (Star LPR).
3.3.1. Setting the IP Addresses
This product has five IP address setting methods for Star’s independent setting protocols. They are
DHCP; BOOTP; RARP; and ARP. Immediately after initializing settings, all settings methods are
initialized and enabled. Therefore, it is possible to set IP addresses using any method.
The following describes how to set IP addresses using each method, assuming the following
addresses: MAC address: 00:80:92:12:34:56; IP address: 192.168.1.1 (pbox)
* The IP address dynamically ensured by this product is not written to the storage field of the setting
information. Specifically, if setting an IP address using either DHCP, BOOTP, RARP or ARP and
starting up that IP address the next time, it is necessary to change the IP address of the setting
information region using http (WEB), FTP and TELNET.
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.1.1. DHCP/BOOTP
This product conforms to RFC2131/RFC2132. It is possible to get the IP address, sub-net mask,
gateway address and DNS server address using either the DHCP server or the BOOTP server.
A work station running either a DHCP server or BOOTP server is necessary for setting IP addresses
using DHCP/BOOTP.
•
•
Supports Windows NT DHCP server specifications (specifications incorporating
Microsoft expansion).
Because part of the DHCP Discover protocol is compatible with the BOOTP Request,
both are handled as the same thing. For example, if a BOOTP Reply is returned for a
DHCP Discover, the system uses the address obtained by BOOTP.
•
The DHCP/BOOTP Request constantly sends with a broadcast (255.255.255.255).
However, only the DHCP Renew Request (delay request for address use time) is sent to
the server that obtained that address.
•
•
DHCP/BOOTP timeout is 4 seconds, which is the recommended value for RFC2131.
However, variable ±1 second according to a random number. There are three retries.
Use the set IP address in the issuer’s address and DHCP/BOOTP CIADDR (client IP
address) field if the IP address is preset. When a normal response is received, it
switches to the newly obtained IP address.
•
The issuer address and CIADDR become 0.0.0.0 if the IP address is not set. Also, in
such a case, a “B” flag (0x8000) is set to the DHCP Discover packet flags field, and a
request is made to the server for each ‘broadcast of DHCP Response.’
Setting Method: Register the IP addresses to be set and the combination of MAC addresses to the
DHCP/BOOTP server, then turn on the power to the product.
3.3.1.2. RARP
A work station running either an RARP server is necessary for setting IP addresses using RARP.
Setting Method: Register the IP addresses to be set and the combination of MAC addresses to the
RARP server, then turn on the power to the product.
3-4
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.1.3. ARP
To set an IP address using ARP, register the IP address in combination with the MAC address and
then transmit a ping.
Setting Example:
(1) Turn on the power to the product
(2) Register the IP address in combination with the MAC address to the ARP table.
(For UNIX)
arp -s pbox 00:80:92:12:34:56 temp
arp –a
(For Windows)
arp -s pbox 00:80:92:12:34:56
arp –a
(3) Transmit a ping.
ping pbox
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.2. LPD Specifications
This products LPD protocol conforms to RFC1179. The list of logic printer names is handled as a
queue name. The product waits for the queue name Ip.
Example: Setting example for printcap
pboxlp:¥
:lp=:rm=pbox:rp=lp:
When sending jobs using Ipr, the order of sending data files and control files inside the
jobs does not affect the printing operation.
Deleting jobs using Iprm is not supported, but as a dummy response, ACK (0x0A of
one octet) is returned.
The Ipq response value format is UNIX compatible, but the long format using Ipq-I is an
independent format including the printer status.
Example: Ipq short format printer ready
lpq –Ppboxlp
no entries
Example: Ipq short format printer not ready
lpq –Ppboxlp
Warning: Printer not ready ←This message is applied regardless of the reason.
no entries
Example: Ipq long format printer ready
lpq -l –Ppboxlp
Ready no entries
Example: Ipq long format printer not ready
lpq -l –Ppboxlp
Not Ready
Printer Cover Open
Receipt Paper End no entries
3-6
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.3. Raw Mode Print (TCP #9100) Specifications
This product provides Raw Mode Print communications that is used as a listen port for the Port: 9100,
as a printing mechanism running under the TCP/IP environment. With Raw Mode Print, all data that
flows between TCP sessions is considered data handled between the printer and PC. Bi-directional
data transmission is thus performed.
The Raw Mode Print function in this product operates under the following conditions.
•
•
The maximum number of sessions accepted on the Port: 9100 is settable using the
following setting items.
9100 Multi-session: Enable: 8; 9100 Multi-session: Disable: 1 A rejection of
acceptance (TCP reset) is issued from the product to all PCs that could not establish
connection if there is no request for connection of more than the maximum number of
sessions accepted.
•
•
•
Data traveling from the printer in the direction of the PC is printer status (ASB status)
information obtained via the serial RS-232C.
Only when there is a change in the status is status data from the printer obtained by an
interruption from the printer and sent to the PC.
The end of 1 data is considered to be established at the cut off of a TCP session (TCP FIN,
TCP RST • TCP Session Timeout). Special communication procedures are not
performed on the printer at this time. In the event that special control is necessary, such
as stopping the printer, that is performed on the PC.
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.4. TELNET Specifications
The TELNET of this product conforms to RFC854. It employs a conversational menu format and is
used to change internal settings, reference and display the status. There are multiple accounts for
logging in. It supports the user names and passwords outlined in the table below. The viewable
and settable items vary for each account.
(See section 2.3.4 Settings/Display Items for details on settings an parameters that can be
referenced.)
Account
User Name
root
Password
Target
Root User
Can be set
System controllers
• No differentiation between • Seven or more char. of ASCII
upper and lower case • Initial Value: No characters
characters
• No differentiation between upper and lower
case characters
None
User
(Any ASCII character string)
General users
Example of Execution of TELNET Commands
Star Micronics IFBD-HW03/04 Ver 1.0.0 TELNET server.
Ethernet Address [ 00:80:92:12:34:56 ]
Copyright (C) 2004 STAR MICRONICS CO.,LTD.
Copyright (C) 2004 silex technology, Inc.
login: root
'root' user needs password to login.
password:
User 'root' logged in.
No. Item
Value
(level.1)
---------------------------------------------------------------------
1 : Configure General
2 : Configure TCP/IP
3 : Configure SNMP
4 : Configure Printer
5 : Web Page Refresh Interval(sec.) : 10
96 : Display Status
97 : Reset Settings to Defaults
98 : Restart Print Server
99 : Exit
Please select(1 - 99)? 1
No. Item
Value
(level.2)
---------------------------------------------------------------------
1 : Change root Password : “”
2 : NIC Reset Control
99 : Back to prior menu
Please select(1 - 99)?
: DISABLE
3-8
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.5. HTTP Specification
This product supports HTTP. This means that it is possible to use a Web browser to change the NIC
and printer settings, display system information when running the product, and view that status of the
printer port.
•
•
•
Conforms to HTTP 1.0 (RFC 1945)
Conforms to HTML 3.0.
Writing is password protected to prevent access by anyone other than the root and
maker.
•
The printer port status display is automatically updated each time it is set by Web or
TELNET (1 to 300 seconds; Initial value: 10 seconds). Also, when updated, it
automatically moves to a position where it is easy to view the status display.
Note: The display of each browser may vary slightly.
There are multiple accounts for setting items necessary for logging in using a Web browser. It
supports the user names and passwords outlined in the table below. The viewable and settable
items vary for each account.
Account
User Name
root
Password
Target
Root User
Can be set
System controllers
• No differentiation between • Seven or more char. of ASCII
upper and lower case • Initial Value: No characters
characters
• No differentiation between upper and lower case
characters
None
User
(Any ASCII character string)
General users
3-9
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.6. FTP Specification
The FTP of this product conforms to RFC959.
It is possible to specify ASCII (A), BINARY (I) or TENEX (L 8) as the transmission mode, but the
differences in the modes is not handled by the product, and depends on the client side.
There are multiple accounts for setting items necessary for logging in by the client. It supports the
user names and passwords outlined in the table below.
Account
Root User
User Name
root
Password
Can be set
Target
System controllers
• No differentiation between • Seven or more char. of ASCII
upper and lower case • Initial Value: No characters
characters
• No differentiation between upper and
lower case characters
User
(Any ASCII character string)
None
General users
The following outlines the directory configuration.
* The files in each directory are dummies.
It is possible for the same actions by reading and writing with any filename, if in the same directory.
/
|─lp/
|
|
print.dat
|─config/
|
config.txt
|
|─flash/
fwdata.bin
Manufacturer Permission
Root User Permission
Port Name
lp
User Permission
Writable
Functions
Print port
It is possible to print the contents of the file by
uploading it to this directory.
Writable
Setting function
* See section 2.6.2 Setting Functions Using FTP
Readable
Writable
config
flash
Readable
Firmware update port
* See section 2.6.3 Updating Firmware Using FTP
Writable
3-10
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
Specify whether to issue put after issuing the cd command and transferring to the transfer destination
directory, or the transfer destination directory to the transfer destination filename of put.
Example 1: Specifying the transfer destination directory name for output
ftp>put testfile /lp
* Specify transfer destination when using put
200 PORT command Ok.
150 Open data connection
226 Data connection closed
7801 byte sent in....
Example 2: Changing the current directory for output
ftp>cd /lp
250 Command Ok.
ftp>put testfile
* Use put after specifying the transfer destination using cd.
200 PORT command Ok.
150 Open data connection
226 Data connection closed
7801 byte sent in....
The FTP NLST (ls) command and LIST (dir) command response formats are compatible with UNIX,
considering supporting FTP clients using GUI.
Ex.:
ftp> dir /
200 PORT command Ok.
150 Open data connection.
total 0
d-w--w--w- 1 nobody nobody
dr--r--r-- 1 nobody nobody
dr--r--r-- 1 nobody nobody
226 Data connection closed.
0 Jan
1
1970 lp
0 Jan
0 Jan
1
1
1970 config
1970 flash
ftp: 190 bytes received in 0.17Seconds 1.11Kbytes/sec.
It is not possible to check the status using NLST/LIST with this product. However, as a substitute
means, it is possible to check the status using the STAT command. The printer status is returned by
provided the directory name (printer name) as an argument. The status of the FTP server is
returned if STAT is issued without applying an argument.
However, the STAT command is not a standard FTP command.
Normally, it is possible to issue a STAT by using the QUOTE command on command line type FTP
clients.
Example 1: (When Printer Status is Normal)
ftp / > quote stat lp
FTP directory status:
Ready
End of status.
Example 2: (When Printer Cover is Open)
ftp / > quote stat lp
FTP directory status:
Not Ready
Printer Cover Open
Receipt Paper End
End of status.
3-11
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.6.1. Printing Mechanism Using FTP
It is possible to print by logging in to this product using FTP, then writing the file to the root directory
or to the “Ip” directory (port).
3.3.6.2. Setting Mechanism Using FTP
It is possible to view settings by logging in to this product using FTP, then accessing the “config”
directory (port) and reading the file.
Also, settings are made by uploading settings files from the client.
Setting File Example
MAC addr: 00:80:92:12:34:56
*** USER
*** Printer Status
Shows the MAC address.
:anonymou
:Ready
The setting is rejected if the MAC
address does not match this
product when writing settings.
Web Page Refresh Interval(sec.) :10
<< Configure General >>
Change root Password
NIC Reset Control
<< Configure WiFi - .11b >>
Wireless Mode
:" ***** "
:ENABLE
:Infra.
:"STAR-WIFI"
:11
:None
:""
Shows the user name currently
accessing.
SSID
Channel
Use WEP
WEP Key
<< Configure TCP/IP >>
DHCP/BOOTP
Shows the current printer status.
:ENABLE
:ENABLE
:0.0.0.0
RARP
IP Address
Subnet Mask
:0.0.0.0
Default Gateway
Universal PnP
9100 Multi Session
<< Configure TCP/IP - DNS >>
Primary Server
Secondary Server
<< Configure TCP/IP - POP >>
POP Protocol
Check Interval(min.)
Local Time Zone
<< Memory Switch Setting >>
Code Page
:0.0.0.0
:DISABLE
:ENABLE
The password item is masked by *
in the display. The password will
be erroneous if re-written while
masked with *, so settings are not
possible if all characters are *.
:0.0.0.0
:0.0.0.0
:DISABLE
:15
:"+09:00"
:Codepage 858 (Multilingual)
:Disable
Black Mark Sensor
•
•
•
•
Setting file format: “Item name;” “Setting” or “Item Name” = “Setting”
Item names and settings are separated by a colon (:) or an equal sign (=) in single byte characters.
A space or a tab code applied to the head or tail of an item name is ignored.
In the following cases, it is ignored and the next line is read.
• The head character of the item name is any other than a number or an alphabetic character.
If a value that cannot be set is input, the status prior to that change in setting is returned and the
connection is closed.
•
When quit normally, the product will self-reboot.
3-12
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
Example: When a Setting Fails
“451 Aborted; Data write error” is returned.
ftp> cd config
ftp> put config.txt
200 PORT command Ok.
150 Open data connection.
451 Aborted; Data write error.
Example: When Ended Normally
“226 Data connection closed.” is returned.
Self-reboot
ftp> cd config
ftp> put config.txt
200 PORT command Ok.
150 Open data connection.
226 Data connection closed.
3-13
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.6.3. Updating Firmware Using FTP
This uploads binary data for upgrades in bin format to the “flash” directory (port) with a binary mode
by logging in to the product using FTP.
•
The firmware cannot be updated using FTP when starting up in the flash memory load
mode when the power is turned on, by setting the DIP switches.
•
•
•
The “flash" port is viewable by all users.
Firmware update is only possible by logging in with the root or maker user.
When uploading or after it is completed, this checks whether transmission was correct by
calculating the sum value of the firmware data on the FTP side. If transmission was not
normal on the firmware, the update of the firmware is cancelled.
•
When the update is normally on FTP, the product will self-reboot.
3.3.6.4. Example of the Procedures for Updating the Firmware of the Product Using FTP
The following describes an example of the procedures for F/W update of the product using FTP.
// PC side environment //
- OS:
Windows 2000 or XP
- File storage location:
"C:¥IFBD-HW_FW_1.0.2"
IFBD-HW03/04 F/W binary data
"IFBD-HW03_04.bin"
is in the folder.
- FTP client software
Startup the standard Windows FTP command from the command prompt.
// IFBD-HW03/04 side environment //
- TCP/IP address: 192.168.222.21
- Root permission password: “”
* A password is unnecessary for default settings.
3-14
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
Startup the command prompt on the targeted PC in the environment outlined above.
In that procedure, operate according to the following steps.
Command Prompt Dump
Explanation
C:¥IFBD-HW_FW_1.0.2>dir
IFBD-HW03/04
confirmation
F/W
binary
file
location
There is no volume label for the C drive.
The volume serial number is 387D-6F02.
Directory of C:¥IFBD-HW_FW_1.0.2
2004/12/24 18:13
2004/12/24 18:13
2004/10/28 09:06
1 file:
<DIR>
<DIR>
.
..
887,845 IFBD-HW03_04.bin
887,845 bytes
2 directories: 15,553,077,248 bytes of available space
C:¥IFBD-HW_FW_1.0.2>ftp
Startup the standard Windows FTP command.
Specify the IFBD-HW03/04 IP address
ftp> open 192.168.222.21
Connected to 192.168.222.21.
220 Star Micronics IFBD-HW03/04 Ver 1.0.0b3 FTP server.
User (192.168.222.21:(none)): root
331 Password required.
Password:
>> IFBD-HW internal FTP server startup message
Log-in as “root” user
No password (In default)
230 User Logged in.
>> Log in successful
ftp> ls
Issues Is command for IFBD-HW internal folder
name check
200 PORT command Ok.
150 Open data connection.
lp
config
flash
>> Check “flash” folder
226 Data connection closed.
ftp: 19 bytes received in 0.13Seconds 0.15Kbytes/sec.
ftp> cd flash
Change target folder to “flash”
Change FTP transfer to binary mode
Transfer F/W binary file
250 Command Ok.
ftp> binary
200 Type set to I.
ftp> put IFBD-HW03_04.bin
200 PORT command Ok.
3-15
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
150 Open data connection.
226 Data connection closed.
ftp: 887845 bytes sent in 13.49Seconds 65.82Kbytes/sec.
ftp> quit
>> Transfer complete message
Quit FTP command
C:¥IFBD-HW_FW_1.0.2>
3-16
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.7. DNS Specification
This product inquires the domain name and host name to the DNS name server and resolves IP
addresses. Also, it is possible to get IP addresses of the DNS name server using DHCP.
3.3.8. IPP
This product supports IPP (Internet Print Protocol)1.0.
•
•
•
•
•
IPP/1.0
Supports HTTP/1.1 chunked encoding
Port 80 or 631 are available for use
Charset supports only UTF-8
Supports Print-Job, Validate-Job, Get-Printer-Attributes, Get-Jobs, Get-Job-Attribute
operations
•
Maximum 8 jobs
The IPP Printer-URI of this product can use either “/ipp” or “/ipp/lp.” For example, if the IP address
3.3.8.1. IPP Job Detail Specifications
As a response to Print-Job, Job-ID and Job-URI are generated. Job-ID is a request ID of the VPORT
level and takes values from 1 to 65535. Job-URI applies a Job-ID with “?” for the Printer-URI. If the
IP address is 192.168.1.1 and the request ID was 215 with Printer-URI=”/ipp,” the job URL will be
This product does not have spooling functions. Therefore, there is basically no response of the
Print-job until data reception is completed and printing ends. However, it is possible to abort jobs
being printed by issuing Get-jobs while printing, getting a job list and then issuing Cancel-job.
After printing, the job is placed in the Completed status. When the maximum number of jobs is
exceeded, the oldest Completed jobs are deleted in order.
3.3.8.2. IPP Attribute Detail Specifications
The entire character string of the device ID is returned to the printer-info, and the printer model name
(“MDL” keyword information) is returned to the printer-make-and-model if it was possible to get the
IEEE1284 device ID from the printer port.
The sysName and sysLocation contents of SNMP for each of the printer-name and printer-location
are returned.
Document-format supports “application/octet-stream” and “text/plain.”
Job-sheet (burner) supports “none,” and “standard.”
3-17
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.8.3. Secure Communications (SSL) Printing Function Specifications
This product is incorporated with SSL (Secure Sockets Layer) for printing in secure communications
(SSL). HTTP is mounted on the upper application of SSL to enable encrypted communications.
Encrypted communication is used in sending and receiving IPP printing and settings information to
the Web browser.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.
(http://www.openssl.org/)
Basic Specifications
Protocol:
SSL v2/v3
TCP port number:
Public key algorithm:
Encryption method/Key length:
443
RSA (Key bit length: Fixed to 512 bits)
DES-40
DES-64
3DES-192
Hash Method:
Authentication:
ID:
MD5
Server authentication
Identification using self-naming ID.
Secure communication (SSL) printing functions are not enabled in the default settings at the time of
shipping. Initially, create an ID from the product Web page. When SSL communications are started,
server authentication is performed in a hand-shake method for identification. At that time, the
exchange of information of the public key encryption necessary for the client and the encryption
method are determined. The client uses this public key to encrypt print data, but only the print server
that issued that ID can decrypt this data.
It is possible to set an effective time period for these IDs so that printing is no longer possible after that
period has expired. This can be used by applying a printer usage time limit. After the time limit has
expired, it is possible to create a new ID again, and to print using this new ID. Because this is a print
server ID, it does not restrict clients. There is no authentication function on the client side.
Furthermore, the name of the ID is not one related to a third party authentication mechanism; rather
it is one in the printer server.
Specify the print port for secure communication (SSL) printing as follows.
(Ex.)
It is also possible to make secure communication (SSL) settings in addition to the secure
communication (SSL) print function. That URL is shown below.
(Ex.)
3-18
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.9. POP3 Specifications
It is possible to send and print email using the Internet standard POP3 protocol. Up to 4 mail
accounts can be registered. Filtering is also possible for received mail using size, title, addressee
and sender.
3.3.9.1. Print Specifications
Only the size and filename of the attached file are printed.
3.3.9.2. Restrictions
It is possible to target mail that exceeds a predetermined size from reception.
Use the POP LIST command response to calculate size.
Use the POP UIDL command to eliminate mail that has been read from the targeted process after the
second time.
It is possible to delete received or printed mail from the server.
3.3.9.3. Filter Definition Character String
The filter is defined by a character string of a maximum of 78 characters.
The S: character string; F: character string; T: character string; and C: character string; are defined by
character strings connected by “&” and “|”
Use the following sentence by connecting using “&” (AND conditions) or “|” (OR conditions) for the
filter settings.
Clas
s
Target for Example of Use
Inspection
S:
F:
T:
Subject
From
To
S:news & S:daily
F:rt-users
C:user | T:use
Prints mail whose subject is daily and news.
Prints mail from rt-users.
Prints mail to support.
C:
CC
Prints mail that includes addressee or user in CC field.
Ex.:
Mail is printed with user 1 in to: or cc:; from: is set to [email protected], and the characters string of the
title in the subject.
3-19
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.10. SMTP Specification
This product supports SMTP. It is provided a function for notifying the operating conditions and the
status of connected printers via email. The main functions are outlined below.
ꢀ
ꢀ
ꢀ
Configures notification messages according to the system (protocol operating
conditions) status and printer status
Three addresses (email addresses) and notification message levels for each address
can be specified.
Queue notification messages according to the message transmission interval settings
and supports a function for batch transmissions. This avoids continuous message
transmissions
ꢀ
Individual messages can be added to the content of the message by using a signature
setting
3.3.10.1.
Transmission Message Format
The message specifications for sending from this product are outlined below.
ꢀ
ꢀ
Messages are in English text only.
One line comprises 63 characters; messages that exceed that amount are
automatically provided with a line break.
ꢀ
No encoding is applied.
See the following page for an example of the transmission format.
3-20
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
Continued from previous page
Example Message Format
0
1
2
3
4
5
6
01234567890123456789012345678901234567890123456789012345678901234
+---------------+---------------+---------------+---------------+---------------+---------------+------
From: Star Micronics
Message Header
From and To reflect settings.
Subject is a fixed characterstring.
Subject: Report from Star Micronics IFBD-HW03/04
Star Micronics IFBD-HW03/04 Ver. 1.0.0
Ethernet Address : 00:80:92:12:34:56
Message Body
Composed of a title, printer status,
system status, and signature
[NEWEST PRINTER STATUS]
ASB(HexDump)
[23 06 00 00 00 04 00 00 00 -- -- -- -- -- -- --]
[-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --]
[-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --]
[-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --]
Title
[PRINTER STATUS]
Displays product name, version and
Ethernet address
00:09:28 Signal Line : [BUSY][NOT SELECT][PAPER OUT][FAULT]
Offline
Printer Cover Open
Receipt Paper End
Latest printer status
[RAS COUNTER INFORMATION]
The number of times of fire to a Print Head [lines]
Displays latest ASB when mail is sent.
76543210
(limiter : 99)
The number of times of Memory-SW rewriting [times]
76543213 (limiter : 200)
Printer status
[SYSTEM STATUS]
IFBD-HW03/04 Version 1.0.0
TCP/IP status
Displays status character string/time of
occurrence (# of sec. after starting product)
IP Address
: 192.168.1.1
Subnet Mask
: 255.255.255.0
Default Gateway : 192.168.1.254
Primary Server : 0.0.0.0
Secondary Server : 0.0.0.0
E-MAIL status
RAS counter information
Displays RAS counter name that exceeds
the limit, the counter value, and limit value
Session:2 times.
All profiles are disabled.
SMTP status
TO-ADDR1
E-MAIL Address: <[email protected]>
Last Session : Nothing
Current status: Waiting for Interval time.
Try to send : 0 times.
Fail to sendr : 0 times.
TO-ADDR2
System status
Displays the network operating status
E-MAIL Address: <>
Last Session : Nothing
Current status: Idle.
Try to send : 0 times.
Fail to sendr : 0 times.
TO-ADDR3
E-MAIL Address: <>
Last Session : Nothing
Current status: Idle.
Try to send : 0 times.
Fail to sendr : 0 times.
Signature
-------------------
Reflects the setting value (4
LINES)
Star Micronics IFBD-HW03/04
00:80:92:12:34:56
-------------------
3-21
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.11. Universal Setting Function
This product is provided a “universal setting function” for automatically detecting this product on
Windows ME and Windows XP.
•
•
Can enable/disable the “universal setting function” using the Web, FTP, or Telnet.
When the “universal setting function” is enabled, and this product is started, it is
automatically detected when using Windows ME or Windows XP. The device is
displayed on the network computer (Windows ME) or network (Windows XP). The
product’s web page is started by double-clicking the device that is displayed. This
makes it possible to make a variety of settings of the product.
•
•
When using Windows XP, it is necessary to install the universal plug and play service.
Displays the device ID character string obtained from the printer for the character string
displayed as the comment for the icon displayed on a Windows PC.
Example:
"MFG:Star;CMD:STAR;MLD:TSP700(STR_T-E001);CLS:PRINTER;"
3-22
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.4. UDP/IP Specifications
3.4.1. JCP (Silex-technology’s setting protocol (UDP #19541)
This product is provided with Silex-technology’s independent protocol (JCP). This product uses this
protocol to search for the accessory LPR client (Star LPR) and the NIC that is connected to the LAN
by this network card initial setting utility software such as “SetuplfbeHeHw.exe.”
3-23
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.4.2. SNMP Specification
The SNMP of this product has an SNMP engine that operates with UDP/IP. It is possible to control
the product and printer information using the SNMP manager.
•
Supports SNMPv1, and MIB-II (RFC1213), Printer-MIB (RFC1759), HostResource-MIB
(RFC1514), and Star’s PrivateMIB.
•
“public” has reading permission for the community name, and the character string
registered in the “Authentic Community” for the product setting information has writing
permission. However, if there is no character string set for the “Authentic Community,”
the community name “public” has writing permission.
•
Restrictions:
sysContact, sysName, sysLocation are restricted to a maximum of 78 characters (in
single byte characters).
1 is always returned for reading values when ifAdminStatus and ifOperStatus are
read-only.
3.4.2.1. Support MIB
The following describes the MIB that is supported by this product.
Name
Explanation
sysDescr
ASCII character string of device name; version number
Object ID representing product identification number
Amount of time system is running from startup (in units of 10msec)
ASCII character string of controller name, and contact information
ASCII character string of domain name for device control
ASCII character string representing physical location of device
Value of service of device protocol hierarchy
sysObjectID
sysUpTime
sysContact
sysName
sysLocation
sysServices
ifNumber
Number of device network interfaces
ifIndex
Interface identification number
ifDescr
ASCII character string representing information relating to interface
Physical/link protocol interface type
ifType
ifMtu
Maximum possible sending/receiving data gram size
Interface transmission speed [bit/sec]
ifSpeed
ifPhysAddress
ifAdminStatus
ifOperStatus
ifLastChange
ifInOctets
ifInUcastPkts
ifInNUcastPkts
ifInDiscards
Interface physical address
Interface control status
Interface operating status
sysUpTime value when interface operating status changed the last time
Number of bytes received by interface
Number of subnetwork unicast packets received and sent by the upper level
Number of broadcast and multi-cast packets received and sent by the upper level
Number of reception packets discarded regardless of being normal packets
because the buffer is full
ifInErrors
Number of reception error packets
ifInUnknownProtos
Illegal protocols or number of reception packets discarded because it is an
unsupported protocol
ifOutOctets
Total number of bytes sent
ifOutUcastPkts
Number of send request packets with the unicast from the upper protocol
3-24
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
Continued on next page
Continuation 1 of Support MIB
Name
Explanation
ifOutNUcastPkts
Number of send request packets with the broadcast and multi-cast from the upper
protocol
ifOutDiscards
ifOutErrors
ifOutQLen
Number of packets discarded without sending because the send buffer is full
Number of packets not sent because of an error
Length of send queue (number of packets)
ifSpecific
Media specific MIB definition object ID of the interface in use
Value (=ifIndex) to identify interface relating to this conversion entry
Physical address dependent on the media
atIfIndex
atPhysAddress
atNetAddress
ipForwarding
Network address (IP address) paired with the physical address
Indicates whether there is a function for forwarding IP data grams received as an IP
gateway to others
(1: Forwarding; 2: Not Forwarding)
ipDefaultTTL
ipInReceives
ipInHdrErrors
ipInAddrErrors
TTL default value of header of IP data gram
Total number of received IP data grams
Number of data grams discarded because of IP header error
Number of data grams discarded because of problem in IP header addressee
address
ipForwDatagrams
Number of IP data grams forwarded to final destination
Number of data grams discarded because protocol of the IP data grams for the node
is unknown or because it is not supported
ipInUnknownProtos
ipInDiscards
ipInDelivers
Number of data grams discarded because of internal problem in buffer space
Number of data grams distributed by the IP user protocol (upper level protocol
including ICMP)
ipOutRequests.0
ipOutDiscards
Number of executions of IP data gram sending requests by the local IP user protocol
Number of IP data grams discarded without being sent because of insufficient buffer
space
ipOutNoRoutes
ipReasmTimeout
ipReasmReqds
ipReasmOKs
Number of IP data grams discarded because there was no route to the destination
when sending
Maximum value for the waiting time for reception of all IP data gram to re-assemble
fragmented IP data grams that were received
Number of fragmented IP data grams received that require re-assembly with this
entity
Number of times of successful re-assemblies of fragmented IP data grams that were
received
ipReasmFails
Number of times of unsuccessful re-assemblies of fragmented IP data grams that
were received
ipFragOKs
Number of successfully fragmented data grams with this entity
Number of fragmented data grams discarded without fragmentation with this entity
Number of fragmented IP data grams generated as a result of fragmentation with
this entity
ipFragFails
ipFragCreates
ipAdEntAddr
IP address belonging to the address information
ipAdEntIfIndex
ipAdEntNetMask
ipAdEntBcastAddr
Interface identification number (=ifIndex) that corresponds to this IP address
Subnet mask value that is related to this IP address
Least significant bit value of IP broadcast address used by the broadcast sent by the
interface of the IP address
ipAdEntReasmMaxSize
Maximum size of the IP data gram that can be re-assembled by this entity from the
fragmented IP data gram that was received
Continued on next page
3-25
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
Continuation 2 of Support MIB
Name
Explanation
ipRouteDest
ipRouteIfIndex
The IP address of the destination of this route (0.0.0.0 = default route)
Interface identification number (=ifIndex) for sending to the next addressee host
after this route
IpRouteMetric
ipRouteNextHop
IpRouteType
Primary routing metric (-1 = not used) of this route
IP address of the next HOP of this route
Type of route (1: None of the ones below; 2: Illegal route; 3: Direct connection; 4:
Indirect connection)
IpRouteProto
Routing type learned from this route
IpRouteAge
Amount of time passed after recognition as a final normal route by this route
Value for logic AND prior to comparing addressee address and ipRouteDest
Definition number on MIB for routing protocol used on this route
Interface identification number (=ifIndex) of this entry
Physical address dependent on the media
IpRouteMask
ipRouteInfo
ipNetToMediaIfIndex
ipNetToMediaPhysAddress
ipNetToMediaNetAddress
ipNetToMediaType
IP address that corresponds to the physical address of this entry
Address conversion method (1: Other than below; 2: Ignored value; 3: Dynamically
converted; 4: Statically converted)
icmpInMsgs
icmpInErrors
Total number of ICMP receptions
Number discarded of those ICMP received because of ICMP specifications errors
such as a check sum error
icmpInDestUnreachs
icmpInTimeExcds
icmpInParmProbs
icmpInSrcQuenchs
icmpInRedirects
Number received of undeliverable messages of ICMP addressee
Number received of ICMP time exceeded messages
Number received of ICMP parameter illegal messages
Number received of ICMP source quenches
Number received of ICMP redirects
icmpInEchos
Number received of ICMP echo request messages
Number received of ICMP echo reply messages
Number received of ICMP time stamp request messages
Number received of ICMP time stamp reply messages
Number received of ICMP address mask request messages
Number received of ICMP address mask reply messages
Total number of ICMP messages sent
icmpInEchoReps
icmpInTimestamps
icmpInTimestampReps
icmpInAddrMasks
icmpInAddrMaskReps
icmpOutMsgs
icmpOutErrors
Number discarded without being sent because the buffer was full when sending
ICMP
icmpOutDestUnreachs
icmpOutTimeExcds
icmpOutParmProbs
icmpOutSrcQuenchs
icmpOutRedirects
Number sent of undeliverable messages of ICMP addressee
Number sent of ICMP time exceeded messages
Number sent of ICMP parameter illegal messages
Number sent of ICMP source quenches
Number sent of ICMP redirect
icmpOutEchos
Number sent of ICMP echo request messages
icmpOutEchoReps
icmpOutTimestamps
icmpOutTimestampReps
icmpOutAddrMasks
icmpOutAddrMaskReps
Number sent of ICMP echo reply messages
Number sent of ICMP time stamp request messages
Number sent of ICMP time stamp reply messages
Number sent of ICMP address mask request messages
Number sent of ICMP address mask reply messages
Continued on next page
3-26
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
Continuation 3 of Support MIB
Name
Explanation
tcpRtoAlgorithm
Resend timeout value determining algorithm on TCP connection
(1: Other than below; 2: Fixed value; 3: MIL-STD-1778 4:Van Jacobson's algorithm)
Minimum value (in 10 msec units) of the resend timeout value for TCP protocol
Maximum value (in 10 msec units) of the resend timeout value for TCP protocol
Maximum number of TCP connections
tcpRtoMin
tcpRtoMax
tcpMaxConn
tcpActiveOpens
tcpPassiveOpens
tcpAttemptFails
tcpEstabResets
tcpCurrEstab
tcpInSegs
Number of TCP connections expanded actively
Number of TCP connections expanded passively
Number of TCP connections failures
Number of TCP connections resets
Number of TCP connections either ESTABLISHED or CLOSE-WAIT
Number of received TCP segments
tcpOutSegs
Number of sent TCP segments
tcpRetransSegs
tcpConnState
Number of resent TCP segments
Status of TCP connection
(1: Closed; 2: Listen; 3: SynSent; 4: SynReceived; 5: Established; 6: FinWait 1; 7:
FinWait2; 8: CloseWait; 9: LastAck; 10: Closing; 11: TimeWait; 12: Delete TCB)
Status of TCP connection
tcpConnState
tcpConnLocalAddress
tcpConnLocalPort
tcpConnRemAddress
tcpConnRemPort
tcpInErrs
Local IP address of this TCP connection
Local port number of this TCP connection
Remote IP address of this TCP connection
Remote connection port of this TCP connection
Number of error segment (TCP check sum errors) received
Number of TCP connections resets
tcpOutRsts
udpInDatagrams
udpNoPorts
Total number of UPD data grams distributed by UDP user
Number of UPD data grams received at a port that is not open
Number of received UPD data grams discarded because of addressee port
application problems
udpInErrors
udpOutDatagrams
udpLocalAddress
Number of UPD data grams received
Local address of port waiting reception of UPD (0.0.0.0: No specification of received
addresses)
udpLocalPort
Local port number waiting reception
Continued on next page
3-27
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
Continuation 4 of Support MIB
Name
Explanation
snmpInPkts
Total number of SNMP messages received from transport service
Total number of SNMP messages sending send requests to transport layer
Total number of unsupported version messages of received SNMP messages
Total number of illegal community name messages of received SNMP messages
Total number of operations not allowed in that community of received SNMP
messages
snmpOutPkts
snmpInBadVersions
snmpInBadCommunityNames
snmpInBadCommunityUses
snmpInASNParseErrs
Number of errors detected in ASN.1 or BER format while decoding the SNMP
messages received
snmpInTooBigs
Number of received SNMP PDU whose error status was “Too Big”
Number of received SNMP PDU whose error status was “No Such Name”
Number of received SNMP PDU whose error status was “Bad Value”
Number of received SNMP PDU whose error status was “Read Only”
Number of received SNMP PDU whose error status was “Gen Err”
Number of MIB objects normally read by Get-Request, Get-NextRequest PDU
Number of MIB objects normally changed by receiving Set-Request
Number of SNMP Get-Request PDU received
snmpInNoSuchNames
snmpInBadValues
snmpInReadOnlys
snmpInGenErrs
snmpInTotalReqVars
snmpInTotalSetVars
snmpInGetRequests
snmpInGetNexts
Number of SNMP Get-NextRequest PDU received
snmpInSetRequests
snmpInGetResponses
snmpInTraps
Number of SNMP Set-Request PDU received
Number of SNMP Get-Response PDU received
Number of SNMP TRAP PDU received
snmpOutTooBigs
Number of PDU sent by specifying “Too Big” in the error status
Number of PDU sent by specifying “No Such Name” in the error status
Number of PDU sent by specifying “Bad Value” in the error status
Number of PDU sent by specifying “Gen Err” in the error status
Number of SNMP Get-Request PDU sent
snmpOutNoSuchNames
snmpOutBadValues
snmpOutGenErrs
snmpOutGetRequests
snmpOutGetNexts
snmpOutSetRequests
snmpOutGetResponses
snmpOutTraps
Number of SNMP Get-NextRequest PDU sent
Number of SNMP Set-Request PDU sent
Number of SNMP Get-Response PDU sent
Number of SNMP TRAP PDU sent
snmpEnableAuthenTraps
Authentication-failure TRAP occurrence control
(1: TRAP occurs; 2: TRAP does not occur)
Continued on next page
3-28
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
Continuation 5 of Support MIB
Name
Explanation
hrDeviceIndex
hrDeviceType
hrDeviceDescr
hrDeviceID
Fixed value applied to connected devices
Type of device connected
Information character string of device connected
Product ID of device connected
hrDeviceStatus
Status of device connected
(1: Unknown; 2: Running; 3: Warning; 4: Testing; 5: Down)
Number of errors on device connected
Status of connected printers
hrDeviceErrors
hrPrinterStatus
(1: Idle; 2: Printing; 3: Warmup)
hrPrinterDetectedErrorState
Status of errors on connected printers
(0: Low Paper; 1: No Paper; 2: Low Toner; 3: No Toner; 4: Door Open; 5: Jammed;
6: Offline; 7: Service Requested)
jciTrapCommunity
jciTrapHost
TRAP community name when NIC issues TRAP
TRAP sending destination IP address
SNMP authentication community name
TTL default value of header of IP data gram
Printer port number
jciAuthenticCommunity
jciDefaultTimeToLive
jciPSPortNumber
jciPSPortIndex
Fixed value applied to printer port
jciPSPortDescr
Printer port number
jciPSPortType
Printer port type
(1: Other; 2: CENTRONICS; 3: SERIAL; 4: BICENTRO; 5: NULL; 6: P1284; 7:
GPIB; 8: SCSI; 9: P1394; 10: USB)
jciPSPortInOctets
Total reception data volume from printer
Total sending data volume to printer
jciPSPortOutOctets
jciPSPortCurrentJobs
jciPSPortCurrentInOctets
jciPSPortCurrentOutOctets
jciPSPortCurrentStatus
Number of print jobs held by NIC
Volume of data received from printer when sending current or prior print job
Volume of data sent to printer when sending current or prior print job
Printer port status
(1: Can print soon; 2: Will be printed later; 3: Can't print currently)
Printer port bit status
jciPSPortCurrentStatusBinary
(bit 0: In Use; bit 1: Busy; bit 2: Not Ready; bit 3: Paper Empty; bit 4: Not Selected;
bit 5: Fault)
jciPSPortCurrentStatusDescr
jciPSEnablePortTrap
Printer port status character string
TRAP issuing control (1: Enable; 2: Disable) when printer port status changes
Printer port monitoring intervals for issuing TRAP
TCP protocol control (0: Enable; 1: Disable)
IP address
jciPSPortTrapInterval
jciPSPConfigTcpEnable
jciPSPConfigTCP/IPIpAddress
jciPSPConfigTCP/IPSubnetMask
jciPSPConfigTCP/IPGatewayAddress
jciPSPConfigTCP/IPRarpEnable
jciPSPConfigTCP/IPBootpEnable
jciPSPConfigTcpDnsAddressPri
jciPSPConfigTcpDnsAddressSec
jciPSPConfigTcpRootPasswd
jciPSPConfigTcpBannerEnable
jciPSPortConfigsNumber
Subnet mask
Gateway IP address
RARP protocol control (0: Enable; 1: Disable)
BOOTP protocol control (0: Enable; 1: Disable)
DNS server (primary) IP address
DNS server (secondary) IP address
Controller password
Burner output control (0: Enable; 1: Disable)
Printer port number when starting up
Fixed value applied to printer port
jciPSPortConfigIndex
jciPSPortConfigDescr
Printer port number
jciPSPortConfigBojRaw
Character string sent to printer before output of direct output port (Ip port)
Continued on next page
3-29
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
Continuation 6 of Support MIB
Name
Explanation
jciPSPortConfigEojRaw
jciPSPortConfigBojKanji
Character string sent to printer after output of direct output port (Ip port)
Character string sent to printer before output to output port (sjis/euc port) via the
Kanji filter
jciPSPortConfigEojKanji
Character string sent to printer after output to output port (sjis/euc port) via the
Kanji filter
jciPSPortConfigPrinterType
jciPSPortConfigTabSize
Printer emulation code
Character string to convert tab codes (0x09) into single-byte spaces (0x20)
when outputting via a Kanji filter
jciPSPortConfigPageWidth
Number of characters in one line when outputting via a Kanji filter
Number of characters in one page when outputting via a Kanji filter
Burner output control (0: Enable; 1: Disable)
Number of users receiving mail
jciPSPortConfigPageLength
jciPSPortConfigBannerOutput
jciPSFConfigMailRecvUserProfileNumber
jciPSFConfigMailRecvUserProfileIndex
jciPSFConfigMailRecvEnable
User number for receiving mail
Mail reception control (0: Enable; 1: Disable)
POP server name
jciPSFConfigMailRecvPopServerName
jciPSFConfigMailRecvPopPortNumber
jciPSFConfigMailRecvUserName
jciPSFConfigMailRecvPassword
jciPSFConfigMailRecvLoginWithApop
jciPSFConfigMailRecvDeleteMails
jciPSFConfigMailRecvInFerstSession
jciPSFConfigMailRecvMaxRetrieve
jciPSFConfigMailRecvFilterSettings
jciPSFConfigMailRecvCheckInterval
jciPSFConfigMailRecvLocalizeTimeStamp
jciPSFConfigMailRecvCurrentTimeZone
jciPSFConfigMailSendEnable
POP port number:
POP user Name
POP password
APOP use control (0: No; 1: Yes)
Received mail delete control (0: No; 1: Yes)
Mail first reception
Maximum size of mail reception
Mail reception filter
Interval to check reception of mail
Local time zone control (0: No; 1: Yes)
Local time zone
Mail sending control (0: Enable; 1: Disable)
SMTP server control
jciPSFConfigMailSendSmtpServerName
jciPSFConfigMailSendSmtpPortNumber
jciPSFConfigMailSendRetry
SMTP port number:
Mail sending retry count
jciPSFConfigMailSendReplyToAddress
jciPSFConfigMailSendAddressNumber
jciPSFConfigMailSendAddressIndex
jciPSFConfigMailSendAddress
Mail origin address
Number of mail origin addresses
Mail origin address number
Mail destination address
jciPSFConfigMailSendInterval
Intervals for checking sent mail
jciPSFConfigMailSendOfflineEvent
jciPSFConfigMailSendPaperEmptyEvent
jciPSFConfigMailSendFaultEvent
jciPSFConfigMailSendSignatureNumber
jciPSFConfigMailSendSignatureIndex
jciPSFConfigMailSendSignature
Sending mail with printer offline (0: Off; 1: On)
Sending mail with printer out (0: Off; 1: On)
Sending mail with printer error (0: Off; 1: On)
Number of lines for signature when sending mail
Line number of signature when sending mail
Character string of signature when sending mail
Support MIB End
3-30
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.4.2.2. TRAP Occurrence Phenomenon
When the EnableAuthenTrap setting on this product is set to ENABLE (which can be set from the
Web or Telnet), the following three types of phenomenon occur for the product to issue a TRAP to the
SNMP manager (Trap notification address).
TRAP Occurrence Phenomenon
1. When the product is started
[Generic trap type = 0 (Cold Start)]
2. When the printer status has changed (IEEE1284 port status monitoring)
[Generic trap type = 6 (Enterprise Specific)]
3. When there was access using an illegally authenticated community name
[Generic trap type = 4 (Authentication Failure)]
3-31
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.5. Other Specifications
3.5.1. DIP Switches and LED Specifications
The DIP switches on this product startup the flash memory loader when only the first switch is ON at
startup.
After the power is turned on, the product checks the status of the DIP switches. If switch #1 is on, the
system enters flash memory load mode. In the load mode, the status LED flashes in approximately
1 second cycles. Switch #2 can determine the wireless mode at this time.
If switch #1 is off, the system starts an application written to the flash memory. By setting switch #2
to on, it is possible to set the default settings at this time.
The following table shows the allocation of operations to each status of the DIP switches.
DIP Switches
Operation
SW-1
OFF
SW-2
OFF
Normal startup
OFF
ON
ON
OFF
ON
Initialize setting information
Startup loader (Infra mode)
Startup loader (Adhoc mode)
ON
3.5.2. Flash ROM Specifications
It is possible to update the product program region by uploading firmware from the network using the
flash memory loader. Normally, this is used to upgrade, but it is also possible to downgrade when
developing products or testing.
FLDP (an independent protocol) and FTP are used as the protocols for upgrading firmware.
•
•
Use a tool dedicated for upgrading using our FLDP. Upload data (extension: .bin) for
the version upgrade in binary format.
Use any general FTP client to upgrade using FTP. Log in, upload data (extension: .bin)
for the version upgrade in binary format to the “flash” directory. TCP/IP is used, so it is
not possible to startup the product in loader mode using the DIP switch operations.
•
If not specified in particular, no initialization of the NIC settings is necessary after
upgrading.
3-32
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.5.3. Self-Diagnosis Function Specifications
This product can print the results of a self-diagnosis and contents of the internal settings.
A self-diagnosis print is performed after a test print of the printer when the printer is started.
Example Self-diagnosis Print
01234567890123456789012345678901234567890
+---------------+---------------+---------------+---------------+
Star Micronics IFBD-HW03/04 Ver 1.0.0
Copyright (C) 2004 STAR MICRONICS CO.,
LTD.
Copyright (C) 2004 silex technology, I
nc.
*** Diagnostic report ***
ROM Check
ROM stat
NIC Check
: Ok
: xxxx FFFF 0000 0000
: Ok
NIC Addr
EEPROM Check
EEPROM Check
: 00:80:92:12:34:56
: Ok
: xxxx xxxx 0000 0000
Wireless LAN status : AP Connected
Current SSID
: STAR-WIFI
: xx:xx:xx:xx:xx:xx
: 5 (1-14)
Current BSSID
Current Channel
Region Code
: 42
*** Configuration report ***
[Web Page Refresh Interval(sec.)]
:10
<< Configure General >>
[Change root Password]
:""
[NIC Reset Control]
:ENABLE
<< Configure WiFi – .11b >>
[Wireless Mode]
:Infra.
[SSID]
:"STAR-WIFI"
[Channel]
:11
[Use WEP]
:None
[WEP Key]
:""
<< Configure TCP/IP >>
[DHCP/BOOTP]
:ENABLE
[RARP]
:ENABLE
[IP Address]
:0.0.0.0
[Subnet Mask]
:0.0.0.0
[Default Gateway]
:0.0.0.0
[Universal PnP]
:DISABLE
[9100 Multi Session]
:ENABLE
<< Configure TCP/IP - DNS >>
[Primary Server]
:0.0.0.0
[Secondary Server]
:0.0.0.0
<< Configure TCP/IP - POP >>
[POP Protocol]
:DISABLE
<< Configure TCP/IP - SMTP >>
[SMTP Protocol]
3-33
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
:DISABLE
<< Configure SNMP >>
[Authentic Community]
:"******"
[Trap Community]
:"public"
[Trap Address(IP)]
:0.0.0.0
[SysContact]
:""
[SysName]
:""
[SysLocation]
:""
[EnableAuthenTrap]
:2
<< Configure Secure Print >>
[Secure Print]
:ENABLE
[SSL Mode]
:ALL
“*** Diagnostic report ***”
The following shows the self-diagnosis print.
When an error is detected at startup, ”*** Hardware problem report ***” is printed.
<ROM check: Explanation of results of ROM check sum inspection>
First Digit
Second Digit
Third Digit
Always 0
Fourth Digit
Always 0
Sum value described in Sum value actually calculated
ROM
NIC check: Shows the results of an NIC packet transmission test. Also, prints the
MAC address.
<EEPROM check: Results of EEPROM check sum inspection>
First Digit
Second Digit
Third Digit
Fourth Digit
Always 0
Sum value described in Sum value actually calculated
EEPROM
Always 0
*** Configuration report ***
The following information indicates the environment setting information stored in the
product.
In environment setting printing, when the protocol stack is disabled, information relating
to the disabled protocol is not output.
(The printing example above is the output result using default settings.)
3-34
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.6. Settings/Display Items
The following shows the sections that can be set and referenced and a list of variables.
3.6.1. General Settings
Variable Name
Setting Range
Initial Value (Default Settings)
None (No password)
Change Root Password
• Seven or more char. of ASCII
• No differentiation between upper and
lower case characters
NIC Reset Control
ENABLE/DISABLE
1-300
ENABLE
10
Web Page Refresh Interval (sec.)
3.6.2. Wireless Settings
Variable Name
Setting Range
Initial Value (Default Settings)
AdHoc.
Wireless Mode
SSID
OldAdHoc/AdHoc/Infra.
Any English character string (Max. 32 “STAR-WIFI”
characters)
Channel
1 to 14
11
Use WEP
WEP Key
None/64bit/128bit
26 digits in hexadecimal
None
00000000000000000000000000
3.6.3. TCP/IP Settings
Variable Name
DHCP/BOOTP
RARP
Setting Range
Initial Value (Default Settings)
ENABLE/DISABLE
ENABLE
ENABLE
0.0.0.0
ENABLE/DISABLE
IP Address
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
ENABLE/DISABLE
Subnet Mask
Default Gateway
Primary Server
Secondary Server
Universal PnP
9100 Multi Session
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
DISABLE
ENABLE
ENABLE/DISABLE
3-35
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.6.4. POP3 (Email Reception) Settings
3.6.4.1. Basic Settings
Variable Name
POP Protocol
Setting Range
Initial Value (Default Settings)
ENABLE/DISABLE
3-60
DISABLE
15
Check Interval (min.)
Local Time Zone
User Profile
“-12:00” to”+12:00”
ENABLE/DISABLE
“+08:00”
DISABLE
3.6.4.2. Account Settings For Each User (User Profile 1 to 4)
Variable Name
Setting Range
Initial Value (Default Settings)
POP Server Name
POP User Name
POP Password
Host name or IP address
None
None
None
110
Max. 31 char. of ASCII
Max. 31 char. of ASCII
POP Port Number
User APOP
1-32767
YES/NO
NO
Delete Mail after Retrieve
Maximum Retrieve (Kbyte)
Filter settings
YES/NO
NO
0-32767
64
Max. 78 char. of ASCII (Japanese lang. OK) (*1)
None
ꢀ
Use the following sentence by connecting using “&” (AND conditions) or “|” (OR
conditions) for the (*1) filter settings.
Class
Target
Inspection
Subject
From
for Example of Use
S:
F:
T:
S:news & S:daily
F:rt-users
Prints mail whose subject is daily and news.
Prints mail from rt-users.
To
C:user | T:user
Prints mail to support.
C:
CC
Prints mail that includes addressee or user in CC field.
3.6.5. SMTP (Email Sending) Settings
3.6.5.1. Basic Settings
Variable Name
SMTP Protocol
SMTP Server Name
From Address
Setting Range
Initial Value (Default Settings)
ENABLE/DISABLE
Max. 78 char. of ASCII
Max. 78 char. of ASCII
Max. 78 char. of ASCII
1-10000
DISABLE
None
None
To Address
None
Check Interval(min.)
SMTP Port Number
Signature Line1
Signature Line2
Signature Line3
Signature Line4
10
1-32767
25
Max. 63 char. of ASCII
Max. 63 char. of ASCII
Max. 63 char. of ASCII
Max. 63 char. of ASCII
-------------------
Star Micronics IFBD-HE03/04
[(Ethernet Address)]
-------------------
3.6.5.2. Event to Address Settings
Variable Name
Offline
Setting Range
Initial Value (Default Settings)
ON/OFF
ON/OFF
ON/OFF
ON/OFF
OFF
OFF
OFF
OFF
Paper Empty
Fault
NearEnd
3-36
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.6.6. SNMP Settings
Variable Name
Authentic Community
Trap Community
Trap Address (IP)
SysContact
SysName
SysLocation
EbableAuthenTrap
Setting Range
Max. 15 char. of ASCII
Initial Value (Default Settings)
“public”
“public”
0.0.0.0
None
None
None
2
Max. 15 char. of ASCII (Japanese lang. OK)
0.0.0.0 to 255.255.255.255
Max. 78 char. of ASCII (Japanese lang. OK)
Max. 78 char. of ASCII (Japanese lang. OK)
Max. 78 char. of ASCII (Japanese lang. OK)
1/2
3.6.7. Secure Print Settings
Variable Name
Secure Print
SSL Mode
Setting Range
ENABLE/DISABLE
ALL
Initial Value (Default Settings)
ENABLE
ALL
RC4-40
RC4-128
DES-40
DES-64
3DES-192
3.6.8. RAS Counter Settings
Variable Name
Setting Range
Initial Value (Default Settings)
99,999,999
Compare Value
0-99,999,999 =
0x00000000-0x05F5E0FF
Send Mail
To Address
Check Interval(min.)
Offline
ENABLE/DISABLE
Max. 78 char. of ASCII
1-10000
DISABLE
None
10
ON/OFF
OFF
Paper Empty
Fault
ON/OFF
OFF
ON/OFF
OFF
3.6.9. Memory Switch Settings
Variable Name
Setting Range
Initial Value (Default Settings)
Normal
Code Page Setting
Black Mark Sensor
Select from list
ENABLE/DISABLE
DISABLE
3.6.10. SSL Identification Creation Settings (Web Only)
3.6.10.1.
Identification Information Settings
Variable Name
Setting Range
Initial
Value
(Default
Settings)
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Country/Region Code
Prefecture Name
City or Town Name
Organization Name
Section Name
2-character character string
128-character character string
128-character character string
64-character character string
64-character character string
64-character character string
128-character character string
General Name
Mail Address
3.6.10.2.
Time Limit Settings
Variable Name
Date of Issue
Time Limit Date
Setting Range
Display Only
to 2049/12/31
Initial Value (Default Settings)
Cannot be set because automatically generated
2049/12/31
3-37
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.7. Status Display
3.7.1. Printer Status Display
The status of the printer can be verified using a Web screen, or TELNET, LPQ (LPSTAT) or FTP
(STAT) commands.
With TELNET, ASB status is displayed in a hexadecimal dump.
The following are shown for the status of the printer.
Status Per Printer Type
Status Information
Status
TSP700
Ready
Idling
○
Not Ready(...)
Error
○
○
○
×
Printer Cover Open
Auto Cutter Error
Cover Open
Cutter Error
Presenter Jam Error
Presenter Paper Jam Error
NotReady(...)
Information in
( )
Paper Near End
(Inner Sensor)
Receipt Paper Inner Side Near End
Receipt Paper End
○
○
×
×
Paper End
Paper in Presenter
(Waiting Removal)
Presenter Paper Detector
OFF-LINE
Offline
3-38
Download from Www.Somanuals.com. All Manuals Search And Download.
IFBD-HW03/04 Product Specifications Rev. 0.00
3.7.2. System Status Display
The status of the printer and system can be verified in the system status display using a Web screen,
or TELNET command. The following shows an example of operations after logging in using the
TELNET command.
Display Example
No. Item
Value
(level.1)
-----------------------------------------------------------
1: Configure General
2: Configure TCP/IP
3: Configure SNMP
4: Configure Printer
5: Web Page Refresh Interval(sec.) : 10
96: Display Status
97: Reset Settings to Defaults
98: Restart Print Server
99: Exit
Please select ( 1 - 99 )? 96
Display Status
1: prn1
2: system
3: ETB Counter
4: RAS Counter
99: Back to prior menu
Please select (1 - 99)?
2
IFBD-HW03/04 Version 1.0.0
TCP/IP status
IP Address
: 192.168.1.1
Subnet Mask
: 255.255.255.0
Default Gateway: 192.168.1.254
Primary Server :0.0.0.0
Secondary Server:0.0.0.0
E-MAIL status
Session:2 times.
All profiles are disabled.
SMTP status:Disabled
Display status
1: prn1
2: system
3: ETB Counter
4: RAS Counter
99: Back to prior menu
Please select (1 - 99)?
3-39
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRONIC PRODUCTS DIVISION
STAR MICRONICS CO., LTD.
536 Shimizunanatsushinya,
Shizuoka, 424-0066 Japan
Tel : 0543-47-0112
OVERSEAS SUBSIDIARY COMPANIES
STAR MICRONICS AMERICA, INC.
1150 King Georges Post Road, Edison,
NJ 08837-3729 U.S.A.
STAR MICRONICS U.K. LTD.
Star House, Peregrine Business
Park, Gomm Road, High Wycombe,
Bucks, HP13 7DL, U.K.
Tel : 732-623-5555
Tel : 01494-471111
Fax: 0543-48-5013
Fax: 732-623-5590
Fax: 01494-473333
Please access the following URL
for the lastest revision of the manual.
Distributed by
REV. 0.00 2005.02.08
Printed in Japan, 80874655
Download from Www.Somanuals.com. All Manuals Search And Download.
|