Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing Stanton’s newest innovation in professional tabletop mixer. The SMX.202 mixer was designed to bring style and
reliability to the mobile or club DJ at an affordable cost.
MAIN FEATURES
Compact design
User replaceable crossfader
2 phono, 2 line, 1 microphone input
Gain, Hi and Low Controls on Channels
Powerful stereo headphone output
Cue Pan Selector (Ch.1-Ch.2)
Bright LED Output Indicators
ACCESSORIES
Checking Package Contents
Check that the carton contains the following items:
(1) SMX.202 Mixer
(2) AC adaptor
(3) User's Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL OVERVIEW
AC 9V
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL OVERVIEW
1. Channel Gain - Adjusts the pre-fader volume for cleaner sound.
11. Headphone Level - Adjusts cue volume.
12. Master Level - Controls the overall output level.
13. Power Switch - Turns unit off and on.
2. Mic Input Gain - Adjusts microphone input level.
3. Mic EQ - The mic channel includes a two-band EQ with a
range of +10dB to -10 dB.
14. Power Connector - Plug in the included power supply
4. Channel EQ - Adjusts the high, mid and low frequency
here.
levels of the input channels for your desire.
15. Master Output - Unbalanced RCA connectors controlled
5. Input Fader - Controls individual source levels (channels) in
by the Master level.
the mix.
16. Line Inputs - Unbalanced RCA jacks for connecting stereo
audio from line level sources such as CD players, HiFi
VCRs, cassette decks, DAT machines, laser discs, tuners,
even synthesizers or other mixing consoles.
6. Crossfader - Used to mixthe sound from both channels.
7. Mic Input - Insert your ¼” microphone plug here.
Note: Plug mono audio sources into both Left and Right inputs
using a "Y" cable connector.
8. Headphone Input - Insert your ¼” headphone plugs here.
9. Input toggle switch - Selects which source will be active
based on what you have connected to the rear panel input
section (phono/line).
17. Phono Inputs - Plug your turntables in here. When these
connectors are used, your signal is fed directly to the
high-quality RIAA phono pre-amplifiers. Use this position
only for turntables. Line level sources will overload the
sensitive phono preamps and will cause distortion.
10. Channel Cue / Cue Pan - Used to preview channel audio
to your headphones. Listen here before bringing up
channel faders or moving the crossfader.
18. GND - Connect each of your turntable ground leads to
either of the two ground terminals.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK SETUP DIAGRAM
Review this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your
microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer
into AC power. Now you are ready to switch everything on.
IMPORTANT: Always switch on your audio input sources, such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning off,
always reverse this operation by turning off amplifiers, then your mixer, and then input devices.
Turntable
Power
Supply
Turntable
AC 9V
DAT, etc.
Power Amp.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Input / output impedance & sensitivity:
Line
Phono
Mic
Master (Rec)
Phones (load=32 ohm)
47k ohm /-14 dB +/-3 dB
47k ohm /-50 dB +/-3 dB
6k ohm /-54 dB +/-3 dB
47k ohm /0 dB +/-3 dB
33 ohm / -3 dB +/-3 dB
Max. output (THD= 5%, load= 47k)
Master (RCA)
Phones
More than 18 dB (8.0V)
More than 5 dB (1.8V) at load=32 ohm
Channel balance: Within 3 dB
Frequency response:
Line
20-20 kHz +/- 3 dB
Phono
Mic
20-20 kHz +2/-3 dB (RIAA)
50-20 kHz +2/-3 dB
S/N ratio: (IEC-A weighted)
Line
Less than -75 dBV
Phono
Mic
Less than -65 dBV
Less than -55 dBV
THD + N:
Master output (load= 47k ohm)
Phones output (load= 32 ohm)
Less than 0.2%
Less than 0.3%
Crosstalk:
More than 50 dB at 1 kHz between L and R channels
Channel EQ:
Hi
+9/-25 dB +2/-3 dB at 10 kHz
Low
+9/-25 dB +2/-3 dB at 100 Hz
Mic EQ :
Hi
+10/-10 dB +2/-3 dB at 10 kHz
Low
+10/-10 dB +2/-3 dB at 100 Hz
Power Source:
Dimensions:
Weight:
AC 9V
228 (W) X 265 (D) X 87 (H) mm
2.8 kg
5
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY & RETURN POLICY
Warranty
Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair
or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective
in material or workmanship for a period of one year following the date of original purchase. Exceptions to this warranty are as noted below:
The warranty for mechanical parts which are subject to wear and tear are limited to the earlier of either thirty (30) days following the date of original
purchase or the following number of cycles: Faders - 15,000; Rotary potentiometers - 10,000; and Switches - 10,000.
Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. Repairs made necessary by reason of misuse,
alteration, normal wear, or accident are not covered under this warranty.
Returns
replacement must be returned (freight prepaid if not hand-delivered) to the authorized Stanton dealer from whom the merchandise was purchased and
in the same country where the merchandise was purchased. For purposes of purchases made via the Internet, the merchandise must be returned to the
authorized Stanton dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser is located and not the authorized
Stanton dealer in the country where the purchaser is located or the country in which the merchandise was received. Any returns to a non-authorized
dealer or to an authorized Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth above will void this warranty.
To initiate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased the merchandise, and follow such authorized
Stanton dealer’s return policy.
Stanton’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating
to the merchandise shall not exceed the price received by Stanton from your purchase of such merchandise. In no event will Stanton be liable for any
of Stanton or otherwise. To the extent permitted by law and except as otherwise provided above, Stanton disclaims any express or implied warranties of
country to country.
If there is a dispute regarding the warranty of merchandise that does not fall under the warranty conditions stated above, please include a written
explanation with the merchandise when returned pursuant to the terms and conditions set forth herein.
Stanton Magnetics
772 S. Military Trail
Phone: +1 (954) 949-9600
Technical Support:
LITS00059 12/18/09
Download from Www.Somanuals.com. All Manuals Search And Download.
|