4-088-152-11 (1)
Trinitron Color TV
GB
Operating Instructions
•
Before operating the unit, please read this manual thoroughly and retain
it for future reference.
KV-XJ29
M80
M50
© 2002 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Using Your New TV
Getting Started ............................................................................................. 4
Step 1: Connect the antenna ................................................................. 4
Step 2: Insert the batteries into the remote ......................................... 5
Step 3: Preset the channels automatically........................................... 5
Connecting optional components ............................................................. 6
Securing the TV ............................................................................................ 8
Presetting channels ...................................................................................... 9
Watching the TV ........................................................................................ 12
Advanced Operations
GB
Customizing the picture and sound ....................................................... 15
Viewing your favorite channels............................................................... 18
Blocking the channels (CHILD LOCK) .................................................. 19
Additional Information
Self-diagnosis function.............................................................................. 20
Troubleshooting ......................................................................................... 21
Overview of controls ................................................................................. 24
Specifications .............................................................................. Back cover
WARNING (continued)
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
Install the TV on a stable TV stand and floor
which can support the TV set weight. Ensure that
the TV stand surface is flat and its area is larger
than the bottom area of the TV.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your New TV
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the Connecting a VCR diagram below.
Rear of TV
or
Antenna cable (not supplied)
IEC connector
(not supplied)
Antenna cable (not supplied)
: Signal flow
Connecting a VCR
To watch the video input, press t (see page 13).
Rear of TV
Antenna cable (not supplied)
To antenna
output
VCR
R
L
Y
CB
CR
To 8
(antenna
input)
AUDIO VIDEO
R
L
VIDEO IN
VIDEO OUT
To video and
audio outputs
(yellow)
-L (MONO)
(white)
To t 1 or 2
(video input)
-R (red)
Audio/Video cable
(not supplied)
: Signal flow
Using Your New TV
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• If you connect a monaural VCR, connect the yellow plug to
jack) and the black plug to -L (MONO) (the white jack).
(the yellow
• If you connect a VCR to the 8 (antenna input) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• Do not connect video equipment to the t 2 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
• When no signal is input from the connected video equipment, the TV
screen becomes blue.
CAUTION
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Front of TV
1
2
1
1
AUTO
PROGR
VHF LOW B/G
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 10).
Note
• During automatic channel presetting, your TV screen will indicate “B/G” ,
“I”, “D/K” or “M” for the TV system.
Using Your New TV
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.
To watch the video input of the connected equipment, press t (see page 13).
Connecting a camcorder/video game equipment
using the t (video input) jacks
Front of TV
Audio/Video cable (not supplied)
To video and
To t 2
audio outputs
(video input)
Camcorder
or
Video game
equipment
(MONO)
2
: Signal flow
Notes
• You can also connect video equipment to the t 1 or 2 (video input) jacks
at the rear of your TV.
• Do not connect video equipment to the t 2 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
Connecting audio/video equipment using the T
(monitor output) jacks
Antenna cable (not supplied)
Rear of TV
To
antenna
output
Audio system
VCR
or
To T
R
L
Y
CB
CR
(monitor
output)
To
audio
inputs
To video and
audio inputs
Audio/Video cable
(not supplied)
(yellow)
-L (MONO)
(white)
-R (red)
: Signal flow
Note
• If you select “DVD” on your TV screen, the signal from the T (monitor
output) jacks will not be output properly. This does not indicate a
malfunction.
Using Your New TV
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD player using the
input) jacks
(component video
1 Connect R and L under
(component video input) on your TV to the LINE OUT,
AUDIO R and L output connectors on your DVD player.
2 Using a component video cable, connect Y, CB, and CR under
(component video
input) on your TV to the COMPONENT VIDEO OUT Y, CB, and CR output
connectors on your DVD player.
Rear of TV
DVD player
R
L
Y
CB
CR
COMPONENT VIDEO OUT
CR CB
S VIDEO OUT
LINE OUT
R-AUDIO-L
Y
VIDEO
To
L (white)
R (red)
To
To audio
output
Audio cable
(not supplied)
(component
video input)
: Signal flow
To component
video output
Component video cable
(not supplied)
Notes
• If your DVD player can output interlace and progressive mode signals,
select the interlace output when connecting to (component video
input) on your TV. Your TV can receive either 525i/60Hz or 625i/50Hz
interlace signals.
• Some DVD player terminals may be labeled differently:
Connect
Y (green)
CB (blue)
CR (red)
To (on the DVD player)
Y
Cb, B-Y or PB
Cr, R-Y or PR
• Since the high quality pictures on a DVD disc contain a lot of information,
picture noise may appear. In this case, adjust the sharpness (“SHARP”)
(see page 16).
Using Your New TV
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.
A
or
Put the cord or chain through the clamps to secure the TV against a wall or
pillar.
B
20
mm
3.8mm
A
B
or
Note
• Use only the supplied screws. Use of other screws may damage the TV.
Using Your New TV
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting
channels
?/1
You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
1
4
2
5
8
0
3
6
9
Number buttons
7
JUMP
-/--
SOUND
MODE
PROGR
2 +/–
PROGR +/–
SELECT
PIC MODE
+ or –
FAVORITE
AUTO
PROGR
TV
Presetting channels automatically
Press ! to turn on the TV.
1
Press AUTO PROGR.
2
VHF LOW B/G
Note
• During automatic channel presetting, your TV screen will indicate “B/G” ,
“I”, “D/K” or “M” for the TV system.
To preset channels automatically from a specified program number
(1) Press SELECT until “AUTO PROGRAM” appears.
(2) Press + or – to enter the “AUTO PROGRAM” mode.
The on-screen display will start flashing.
(3) Press PROGR +/– or the number buttons until the desired program number
appears.
(4) Press + or – to start presetting channels automatically.
continued
Using Your New TV
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting channels (continued)
Presetting channels manually
Press SELECT until
1
SELECT
“MANUAL PROGRAM”
appears.
b
b
MANUAL PROGRAM
Press + or – to enter the
2
“MANUAL PROGRAM”
VHF LOW B/G
mode.
Press PROGR +/– or the
3
1
4
2
5
8
0
3
6
9
number buttons until the
desired program number
appears.
PROGR
or
7
-/--
Press + or – until the
desired channel picture
appears.
1
4
5
b
Press SELECT to exit the
“MANUAL PROGRAM”
mode.
SELECT
To change the TV system setting
If the picture or sound is abnormal when receiving programs through the
input) terminal
8
(antenna
(1) Press SELECT until “TV SYS” appears.
TV SYS: B/G
I
D/K
B/G
M
(2) Press + or – to select the appropriate
TV system until the picture or sound
quality is optimal.
Using Your New TV
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the color system setting
If the color is abnormal when receiving programs through the
8
(antenna input)
terminal or the
t
(video input) jack.
(1) Press SELECT until “COLOR SYS” appears.
COLOR SYS: AUTO
PAL
SECAM
(2) Press + or – to select the appropriate
color system until the color is
optimal.
AUTO
NTSC 4.43
NTSC 3.58
Tip
• Normally set “COLOR SYS” to “AUTO”.
Skipping program numbers
Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
1
Press SELECT until “MANUAL PROGRAM” appears.
Press + or – to enter the “MANUAL PROGRAM” mode.
Press PIC MODE.
2
3
4
5
Press SELECT to exit the “MANUAL PROGRAM“ mode.
To restore the skipped program number again
Preset the channel automatically or manually.
Tip
• You can also use SELECT and 2 +/– on the TV to preset channels and
skip program numbers.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control once.
(4) Press
to display “FINE” on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to return to normal screen.
Using Your New TV
11
Download from Www.Somanuals.com. All Manuals Search And Download.
%
Watching the TV
?/1
t
This section explains functions used
while watching the TV. Most operations
can be done using the remote.
a
1
2
5
8
0
3
6
9
4
7
Number buttons
JUMP
-/--
SOUND
MODE
JUMP
2 +/–
PROGR
PROGR +/–
SELECT
+ or –
FAVORITE
1
indicator
TV
Press ! to turn on the TV.
1
When the TV is in the
standby mode (the 1
indicator on the TV is lit
red), press ?/1 on the
remote or PROGR +/– on
the TV.
Press PROGR +/– or the
2
number buttons to select
the program number.
1
4
2
5
8
0
3
6
9
PROGR
or
For double digit numbers,
press -, then the number
(e.g., for 25, press -, then
2 and 5).
7
-/--
Press 2 +/– to adjust the
volume.
3
Using Your New TV
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional tasks
To
Press
Turn off temporarily
?/1. The 1 indicator on the TV lights up red.
! on the TV.
Turn off completely
Mute the sound
%.
t to select “VIDEO 1”, “VIDEO 2” or “DVD”.
To return to the TV program, press a.
Watch the video input
(VCR, camcorder, etc.)
JUMP.
Jump back to the previous program
number
.
Display the on-screen information*
SELECT repeatedly until “INTELLIGENT VOL”
appears, then press + or – to select “ON”.
Adjust the volume of all
program numbers automatically
To cancel, select “OFF”.
Adjust the picture position when it
is not aligned to the TV screen
SELECT repeatedly until “PIC ROTATION” appears,
then press + or – to adjust the alignment of the picture
position.
PIC ROTATION
The
or
icon on the screen flashes while
adjusting.
* The picture, sound, and either the program number or video input are
displayed. The on-screen display for the picture and sound information
disappears after about three seconds.
Changing the on-screen display language
Press SELECT until
SELECT
1
2
“LANGUAGE/
: ENGLISH”
appears on the screen.
LANGUAGE /
LANGUAGE /
: ENGLISH
Press + or – to select
“
“.
:
Tip
• You can also use SELECT and 2 +/– on the TV to select the on-screen
display language.
continued
Using Your New TV
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching the TV (continued)
Setting the Wake Up timer
Press until the desired
1
WAKE UP TIMER:10M
After 10 minutes
period of time appears.
The Wake Up timer starts
immediately after you have
set it.
WAKE UP TIMER:OFF
No Wake Up timer
WAKE UP TIMER:12H00M
After 12 hours
Select the program number or video input you want to display when you
wake up.
2
3
Press ?/1 or set the Sleep timer if you want the TV to turn off automatically.
The indicator on the TV lights up orange when the TV goes into standby
mode.
To cancel the Wake Up timer
Press until “WAKE UP TIMER: OFF” appears or turn off the TV’s
main power.
Note
• If no buttons or controls are pressed for more than two hours after the TV
is turned on using the Wake Up timer, the TV automatically goes into the
standby mode. To continue watching the TV, press any button or control
on the TV or the remote.
Setting the Sleep timer
Press until the desired
period of time appears.
SLEEP TIMER:30M
After 30 minutes
SLEEP TIMER:60M
After 60 minutes
The Sleep timer starts
immediately after you have
set it.
SLEEP TIMER:OFF
No Sleep Timer
SLEEP TIMER:90M
After 90 minutes
To cancel the Sleep timer
Press until “SLEEP TIMER: OFF” appears or turn the TV off.
Using Your New TV
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Advanced Operations
Customizing the
picture and sound
SOUND
MODE
PROGR
SOUND MODE
SELECT
+ or –
You can customize the picture and
sound by selecting the picture and
sound modes or by adjusting its
settings.
PIC MODE
FAVORITE
You can change the sound effect by
selecting the surround mode.
TV
Selecting the picture and sound modes
To select the picture mode
PIC MODE
DYNAMIC
STANDARD
SOFT
Press PIC MODE
repeatedly until you get
the desired picture mode.
Select
To
“DYNAMIC”
“STANDARD”
“SOFT”
view high contrast pictures.
view normal contrast pictures.
view mild pictures.
To select the sound mode
SOUND
MODE
Press SOUND MODE
≥ DYNAMIC
≥ DRAMA
≥ SOFT
repeatedly until you get
the desired sound mode.
Select
To
“DYNAMIC”
listen to dynamic and clear sound that emphasizes the low and
high sound.
“DRAMA”
“SOFT”
listen to sound that emphasizes vocals and background music.
listen to soft sound.
continued
Advanced Operations
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the picture and sound (continued)
Adjusting the picture and sound settings
Press SELECT until the
desired setting appears.
SELECT
1
PICTURE
60
PICTURE
COLOR
BRIGHT
BASS
HUE*
Each time you press
SELECT, the setting
item will change as follows:
BALANCE
TREBLE
SHARP
Press + or – to adjust the
item.
2
3
To adjust other items, repeat steps 1 to 2.
* “HUE” can be adjusted for the NTSC system only.
Notes
• When you select a picture or sound mode, the adjusted settings will be
reset according to the selected mode.
• You can also use SELECT and 2 +/– on the TV to adjust the picture and
sound settings.
Selecting the wide mode
Press SELECT repeatedly
1
SELECT
until “WIDE MODE”
appears.
WIDE MODE: OFF
Press + or – to select
“ON”.
2
OFF
ON
Select
To
“ON”
change the picture size when receiving wide mode (16:9) picture
signal.
“OFF”
turn off the wide mode.
Advanced Operations
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the surround mode
Press SELECT repeatedly
until “SURROUND”
appears.
SELECT
1
b
b
SURROUND: MOVIE
Press + or – to select the
2
desired surround sound.
MOVIE
MUSIC
OFF
Select
To
“MOVIE”
listen to sound that spreads out over a large area, giving the feeling
of being at a movie theatre.
“MUSIC”
“OFF”
listen to the sound that gives the feeling of being at a live concert.
turn off the surround sound.
Advanced Operations
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing your
favorite channels
1
2
5
8
0
3
6
9
Number
buttons
4
7
You can display six of your favorite
channels for quick and easy selection.
You can program the favorite channel
as well.
JUMP
-/--
SOUND
MODE
PROGR
PROGR +/–
+ or –
FAVORITE
FAVORITE
Selecting a favorite channel
Press FAVORITE.
FAVO R I T E C H
1
FAVORITE
1 P R 0 1 2 P R 0 2 3 P R 0 3
4 P R 0 4 5 P R 0 5 6 P R 0 6
Press the number button
2
1
1
2
5
3
6
from 1 to 6 to select the
4
desired favorite channel.
When you use the “FAVORITE CH SETUP”
feature for the first time, six preset channels will appear.
Programming the favorite channel
Press PROGR +/– or
1
4
2
5
8
0
3
6
9
8
1
2
3
4
5
PROGR
number buttons to select
the program number you
want to program (e.g.
program number 8).
or
7
-/--
Press SELECT until
“FAVORITE CH SETUP”
appears.
SELECT
FAVORITE CH SETUP :
Press + or – to select the
favorite channel you want to
program (e.g. 3).
FAVORITE CH SETUP :
Press SELECT.
SELECT
The selected favorite channel (e.g.,3) turns
red for about one second.
To program other favorite channels, repeat steps 1 to 4.
Advanced Operations
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Blocking the
channels
(CHILD LOCK)
1
2
5
8
0
3
6
9
4
7
You can lock some program numbers to
prevent children from watching certain
channels, by using the buttons on the
remote control.
JUMP
-/--
SOUND
MODE
PROGR
SELECT
+ or –
FAVORITE
TV
Select the program number you want to lock.
1
2
Press SELECT until “CHILD
SELECT
LOCK” appears on the
screen.
CHILD LOCK: OFF
Press + or – to select
“ON”.
3
The symbol appears on
the screen.
1
To cancel, press + or – to
select “OFF”. The
symbol disappears from
the screen.
CHILD LOCK: ON
Note
• If you preset a locked program number, that particular program number
will be unlocked automatically.
Advanced Operations
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Self-diagnosis function
Your TV is equipped with a self-diagnosis function. If there is a
problem with your TV, the 1 indicator flashes red. The number of
times the 1 indicator flashes indicates the possible causes.
Front of TV
1 indicator
Check that the 1 indicator flashes red several times between three second
intervals.
1
Count the number of times the 1 indicator flashes.
2
3
4
Press ! (main power) to turn off your TV.
Inform your nearest Sony service center about the number of times the
1 indicator flashes.
Be sure to note the model name and serial number located on the rear of
your TV.
Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Troubleshooting
If you find any problem while viewing your TV, please check the following guide. If
any problem persists, contact your Sony dealer .
Symptom
Possible cause
Solutions
Page
Snowy picture
• Connection is loose or
the cable is damaged.
• Check the antenna cable and connection
on the TV, VCR and on the wall.
4
• Channel presetting is • Press SELECT until “MANUAL
10
inappropriate or
incomplete.
PROGRAM” appears on the screen, then
preset the channel again.
Noisy sound
• The antenna type is
inappropriate.
• Check the antenna type (VHF/UHF).
Contact a Sony dealer for advice.
–
–
–
–
• The antenna direction
is inappropriate.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Signal transmission is
low.
• Try using a booster.
Distorted picture
• Broadcast signals are
too strong.
• Turn off or disconnect the booster if it is
in use.
Noisy sound
Good picture
• The TV system setting
or channel presetting
is inappropriate or
incomplete.
9
• If the sound of all the channels are noisy,
check the TV system (TV SYS) setting,
then press AUTO PROGR to preset the
channels again.
• If the sound of some channels are noisy,
select the channel, then select the
appropriate TV system (TV SYS).
10
Noisy sound
No picture
• The power cord,
antenna or VCR is not
connected.
• Check the power cord, antenna and the
VCR connections.
4
• The TV is not turned
on.
• Press ?/1 (power).
13
12
• Press ! (main power) on the TV to turn
off the TV for about five seconds, then
turn it on again.
No sound
continued
Additional Information
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (continued)
Possible cause
Solutions
Page
Symptom
Good picture
12
•
The volume level is too
low.
• Press 2 + to increase the volume level.
13
• The sound is muted.
• Press % to cancel the muting.
No sound
• There is local
interference from cars,
neon signs, hair
dryers, power
• Do not use a hair dryer or other
equipment near the TV.
Dotted lines or
stripes
–
–
• Adjust the antenna direction for
minimum interference. Contact a Sony
dealer for advice.
generators, etc.
•
Broadcast signals are
reflected by nearby
mountains or buildings.
Double images or
“ghosts”
• Use a highly directional antenna.
• Use the fine tuning (FINE) function.
–
11
• The antenna direction
is inappropriate.
–
–
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Use of a booster is
inappropriate.
• Turn off or disconnect the booster if it is
in use.
• The color level setting
is too low.
16
• Press SELECT until “COLOR” appears
on the screen, then press + or – to adjust
the color level.
No color
• The color system
setting is
inappropriate.
11
• Press SELECT until “COLOR SYS ”
appears on the screen, then check the
color system setting (usually set this to
“AUTO”).
• The antenna direction
is inappropriate.
–
–
• Adjust the antenna direction. Contact a
Sony dealer for advice.
Abnormal color
patches
• Keep external speakers or other electrical
equipment away from the TV. Do not
move the TV while the TV is turned on.
Press ! (main power) on the TV to turn
off the TV for about 15 minutes, then
turn it on again.
• The magnetic
disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Symptom
Page
Possible cause
Solutions
Picture slant
• The magnetic
disturbance from
• Keep external speakers or other electrical
equipment away from the TV.
–
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
• Press SELECT until “PIC ROTATION”
appears on the screen, then press + or –
to adjust the picture position until it is
optimal.
13
11
• Use the fine tuning (FINE) function.
Lines moving across
the TV screen.
• There is interference
from external sources,
e.g., heavy
machineries, nearby
broadcast station.
20
• Contact your nearest Sony service center.
The 1 indicator on
your TV flashes red
several times
• Your TV may need
service.
between three
second intervals.
TV cabinet creaks.
•
Changes in room
temperature
sometimes make the
TV cabinet expand or
contract, making a
noise. This does not
indicate a malfunction.
–
–
—
—
A “boom” sound is
heard when the TV
is turned on.
• The TV’s
demagnetizing
function is working.
This does not indicate
a malfunction.
Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Overview of controls
TV front panel
PROGR
(MONO)
SELECT AUTO
PROGR
2
Function
Button
Page
5
Preset channels automatically.
Select the desired item.
Select program number.
Turn off or turn on the TV.
Adjust volume.
Standby indicator.
Select TV or video input.
Wake Up indicator.
AUTO PROGR
SELECT
PROGR +/–
!
11
12
12
12
12
13
14
–
2 +/–
1
t
Headphone jack.
i
Additional Information
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Button
SELECT
Function
Page
Select the desired item.
Adjust value.
10
10
12
12
12
12
+/–
PROGR +/–
0 – 9, -/--
2 +/–
?/1
Select program number.
Input numbers.
1
4
3
6
9
2
5
8
0
Adjust volume.
Turn off temporarily or turn on
the TV.
7
JUMP
-/--
t
a
%
Select TV or video input.
Display the TV program.
Mute the sound.
13
13
13
13
13
SOUND
MODE
PROGR
Display on-screen information.
JUMP
Jump to previous program
number.
Timer operations
Set TV to turn on automatically.
Set TV to turn off automatically.
Select picture mode.
14
14
15
15
18
FAVORITE
PIC MODE
SOUND MODE
FAVORITE
Select sound mode.
Display favorite channels.
TV
Stereo/bilingual operations
A/B
Not function for your TV.
–
Teletext operations
The names/symbols of
buttons on the remote are
indicated in different colors to
represent the available
functions.
_
Not function for your TV.
Label color Button function
White
For general TV
operations
x (red, green,
yellow, blue)
For Teletext
operations
Green
Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Specifications
KV-XJ29M80
KV-XJ29M50
Note
Power requirements
Power consumption (W)
Television system
Color system
110 - 240 V AC, 50/60 Hz
Indicated on the rear of the TV
B/G, I, D/K, M
PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43
Channel coverage
B/G
VHF : E2 to E12
UHF : E21 to E69
CATV : S01 to S03, S1 to S41
I
UHF : B21 to B68
CATV : S01 to S03, S1 to S41
D/K
VHF : C1 to C12, R1 to R12
UHF : C13 to C57, R21 to R60
CATV : S01 to S03, S1 to S41, Z1 to Z39
M
VHF : A2 to A13
UHF : A14 to A79
CATV : A-8 to A-2, A to W+4, W+6 to W+84
8 (Antenna)
75-ohm external terminal
5W + 5W
Audio output (Speaker)
Number of terminal
(Video)
Input: 3* Output: 1 Phono jacks; 1 Vp-p, 75 ohms * Two input lines
available
(Audio)
Input: 3* Output: 1 Phono jacks; 500 mVrms
* Two input lines
available
(Component Video)
Input: 1
Phono jacks;
Y: 1 Vp-p, 75 ohms,
sync negative
C
C
B: 0.7 Vp-p, 75 ohms
R: 0.7 Vp-p, 75 ohms
Audio: 500 mVrms
i (Headphone)
Picture tube
Output: 1
Stereo minijack
29 in.
Tube size (cm)
72
Measured diagonally
Measured diagonally
Screen size (cm)
Dimensions (w/h/d, mm)
Mass (kg)
68
794 × 573 × 517
49
Design and specifications are subject to change without notice.
Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|