RM.416
4 channel Rack Mount MixeR
user Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
contents
1. introducton ................................................................................................................................................................ 1
1.1. Welcome to the RM.416! ............................................................................................................................................... 1
1.2. Overview ........................................................................................................................................................................ 1
2. connectng the RM.416 ............................................................................................................................................... 2
3. RM.416 Descripton ..................................................................................................................................................... 3
3.1. Front Panel ..................................................................................................................................................................... 3
3.2. Rear Panel ...................................................................................................................................................................... 5
4. troubleshootng .......................................................................................................................................................... 6
Specificatons ..................................................................................................................................................................... 7
Registraton card .............................................................................................................................................................. 10
Stanton Warranty ............................................................................................................................................................ 11
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
introducton
1.
introducton
1.1
Welcome to the RM.416!
Thank you for purchasing the RM.416.
Before startng, please check that you have received the following items:
•
•
•
RM.416 unit
Power Cable
User Manual
Now that you have checked that everything was included in the box, let’s talk about the RM.416.
1.2
overview
The RM.416 is Stanton’s latest additon to the RM (Rack Mount) series of mixers. With four traditonal channels coupled with three
microphone inputs the RM.416 is a perfect mixer for the most demanding mobile or club DJ. In additon to a vast array of traditonal
connectvity, the RM features a USB connecton for either playing music from your favorite DJ applicaton or recording your mix in
real tme.
Additonally, the RM.416 features a subwoofer output with built-in crossover control minimizing the need for an external crossover
while maintaining the ability to adjust the output to perfectly match your sound system. All of these features are packed into a
4-space rack unit with rugged metal inner chassis ensuring that the components are protected from damage and maintaining a
consistent feel through the long life of the product.
So let’s summarize the main RM.416 features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4 Channel 19” rack mount mixer
Soſt power On/Off for silent operaton
2 Front panel microphone inputs with Gain and 3-band EQ
USB connecton for recording to or playback from a computer
3-Band EQ per channel (-26 dB to +10 dB)
Subwoofer output with Gain and Crossover (40 Hz-200 Hz) control
VCA crossfader reduces noise and improves life of fader
User replaceable crossfader and line faders
Balanced XLR Master output with Trim control
Balanced ¼” Zone output (Booth/Aux out)
3 Microphone, 8 stereo line, and 3 stereo Phono/Line switchable inputs
Talkover control for front panel microphone inputs
A/B/Bypass crossfader assign per channel
Signal indicator for each channel
10 segment LED metering for Master output
Versatle cueing secton with Cue/Master mix control
Illuminated Cue and Fader Start butons
Unbalanced stereo RCA record output
Internal Power supply (AC 110-240 V switchable)
Fader Start control for triggering external CD players with crossfader
Mono/Stereo switch for Master output
Ok, now that we’ve covered the RM.416 basics, let’s get started!
1
Download from Www.Somanuals.com. All Manuals Search And Download.
connectng the RM.416
2.
connectng the RM.416
Before startng to connect the RM.416, please read the Important Safety Instructons page and study this setup diagram
(Figure 2.1). Make sure all faders are at "zero,” the Master Volume is turned all the way counterclockwise, and all devices are Off.
Figure 2.1
Now, please follow these simple instructons:
1. Connect all input sources.
2. Connect your microphone and monitor headphones.
3. Connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks.
4. Plug your mixer and other devices into AC power.
5. Connect your PC to the RM.416 via USB cable.
6. Switch everything On in the following order:
- Audio input sources (such as turntables or CD players, etc).
- Mixer
- Amplifiers
note: When turning Off, always reverse this operaton by turning Off amplifiers, then your mixer, and lastly any input devices.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.416 Descripton (Front Panel)
3.
RM.416 Descripton
3.1
Front Panel (Figure 3.1)
Figure 3.1
1. Mic gain (gain): These rotary knobs control the output volume of the Mic channels.
2. Mic eQ: These knobs control the frequency response of MIC 1/2 separately. Range -12 dB to +12 dB.
HI: Adjusts the High frequencies (centered at 10 kHz).
MID: Adjusts the Mid range frequencies (centered at 1 kHz).
LOW: Adjusts the Low frequencies (centered at 100 Hz).
3. Mic on/oFF/talkoVeR Switch: Turns the Mic ON or OFF. When the switch is in the TALKOVER positon, the mixer’s sound
level will decrease around 14 dB (except the Mic) so that the announcement is more clearly heard over the music.
4. cue (cue): Pressing any or all of the CUE butons routes the respectve sources to the headphones .
5. crossfader assign Switch (cF aSSign): To send a channel to the Leſt or Right side of the crossfader, move the switch to the
corresponding positon (A or B). If you set the switch to OFF (middle positon), the channel is not assigned to the crossfader.
6. Fader Start (FaDeR StaRt): This feature allows you to use the crossfader to start and stop a compatble CD player. Press this
buton to actvate it.
7. crossfader: It blends the output signals of CH 1-4 based on the positon of the CROSSFADER ASSIGN SWITCH (5).
8. cue Mix (cue Mix): This knob controls the mix between the Cue signal and the Program audio. When a channel CUE buton
is pressed, you will hear it on the CUE side of the CUE MIX knob. When the MASTER CUE is pressed, it will be heard on the
PGM side of the knob. This feature is partcularly useful when mixing without a monitor.
9. cue level control (VoluMe): Adjusts Cue volume.
10. Split cue (SPlit cue): When this buton is engaged, the audio from the Cue bus and the Program bus are merged into a mono
signal and routed to either side of the headphones.
11. headphone output (heaDPhoneS): Insert your ¼” headphones plug here. Be sure to set the CUE LEVEL CONTROL (9) to
minimum before you put the headphones on.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.416 Descripton (Front Panel) - contnuaton
12. Zone (Zone): This knob controls the level of the ZONE output located on the Rear Panel (5). The ZONE level is not affected by
the MASTER VOLUME and MASTER BALANCE. The ZONE output is essentally a second Master output and can be used to drive
a booth monitor, feed a recorder, or provide audio to a secondary set of PA speakers.
13. Subwoofer (VoluMe): This knob controls the level of the SUBWOOFER output located on the Rear Panel (3).
14. Frequency (FReQ): This knob adjusts the cut off frequency of the low pass filter from 40 Hz to 200 Hz. The low adjustment will
affect the Subwoofer output.
15. Balance (Balance): Used to adjust the Leſt-Right balance of the Master output.
16. Power indicator (PoWeR): When the POWER SWITCH is in the ON positon, the POWER INDICATOR lights red.
17. Power Switch: Turns the mixer ON or OFF.
18. Master Volume (MaSteR): Controls the Master output volume.
19. PFl/PgM level Meter: It allows you to monitor the STEREO Master output level or the Mono output level.
- In STEREO mode, the meter indicates the stereo level in the Leſt and Right Master channels.
- In SPLIT CUE (MONO) mode, Cue level is displayed on the Leſt meter and Master level is displayed on the Right meter.
20. Master Switch (MaSteR): Selects either MONO or STEREO for Master output. This is useful if you have a device atached that
is only outputng one channel.
21. channel Fader: These faders are used to control the output signal of any source assigned to its partcular channel.
22. input Selector Switch: Selects the input source assigned to each channel.
23. Signal indicator: These LEDs indicate the level of the audio input signal.
- A green light indicates that the RM.416 is receiving audio from a source device.
- A red light indicates that the audio input level is clipping (over 0 dB). Please turn down the related GAIN knob.
24. channel eQ: These rotary knobs control the frequency response of the selected inputs.
HI: Adjusts the High frequencies from -15 dB to +10 dB (at 13 kHz).
MID: Adjusts the Mid frequencies from -25 dB to +10 dB (at 1 kHz).
LOW: Adjusts the Low frequencies from -25 dB to +10 dB (at 70 Hz).
25. channel gain: Adjusts the level of the selected input from -∞ to 14 dB.
26. Microphone input (Mic): Connect a standard unbalanced 1/4 plug or XLR 3-pin balanced male plug.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.416 Descripton (Rear Panel)
3.2
Rear Panel (Figure 3.2)
Figure 3.2
1. Power connector (ac in): While the power is switched OFF, plug the included power cord into the mixer first, and then plug
it into the outlet.
2. uSB Port (uSB): Aſter hooking up your computer with the USB 1.1 connectons, your computer will detect the RM.416 as an
external sound card. You may either play music on your computer or send it via the USB connecton as a source (set Channel
3 source to USB), or you may record the Master output audio on your computer using the USB connecton.
- The sent Master output signal is not affected by the positon of the volume controls. To use the USB connecton, please
refer to the manual for your chosen soſtware.
- USB cable limit within 3 meters.
3. Subwoofer/lightng output (SuBWooFeR/lighting): This 1/4" connector provides a mono line level output of main out.
Connect this output to either your subwoofer input, or to the audio input on your lightng controller. The signal is affected by
the MASTER VOLUME (Front Panel, 18).
4. Balanced xlR Master output (BalanceD): The Master Output includes a pair of balanced XLR connectons. These should be
used whenever possible.
5. Zone output (Zone): These stereo pair of unbalanced outputs provides a line level signal with an independent front panel
Zone control and is not affected by the MASTER VOLUME.
6. Master output trim (tRiM): This knob is used to decrease the Master output to protect connected amplifiers and speakers
from excessive input.
7. Rca Master output (unBalanceD): The RCA jacks send a low current unbalanced output signal. Use this output for shorter
cable runs to signal processors or looping to another mixer. For cable runs greater than 15 feet, please use the XLR outputs.
8. Rec output (Rec out): This is an unbalanced output designed for various tape and CD recorders. The Record Out level is
dictated by the CHANNEL FADER, and it is not affected by the MASTER VOLUME.
9. line inputs (ln4): These inputs are used for unbalanced line level devices (like CD players or soundcards). Input volume will
be controlled by the 4th CHANNEL FADER. To monitor any source connected to these jacks, set the channel INPUT SELECTOR
SWITCH to LN4.
10. aux 4 inputs (aux4): These inputs could be used to connect CD players, Tape Decks and other line level instruments. Input
volume will be controlled by the 4th CHANNEL FADER. To monitor any source connected to these jacks, set the channel
INPUT SELECTOR SWITCH to AUX 4.
11. Ph/aux input (Ph3/aux3): You can use these Inputs to connect your turntable, CD players, etc. For example:
- Connect your turntables and set the PH/AUX switch to PHONO.
- Connect your CD players, Tape decks, iPods, etc and set the PH/AUX switch to AUX.
To monitor any source connected to these inputs, set the channel INPUT SELECTOR SWITCH to PH 3/AUX 3.
12. Fader Start control Jack (FaDeR): Connect the mini plug included with your CD player and press the FADER START buton.
This functon allows the fader to actvate or return to the preset Cue Point on your compatble CD player.
13. gnD (gRounD teRMinal): To eliminate electrical hum, connect the ground cable from your standard turntable ground post
to the RM.416 ground terminal. Some turntables (like the Stanton STR8.150) do not require grounding wire.
14. channel line level Selector Switches (Ph/aux): These switches are used to change the voltage line levels of their related
Phono/Aux RCA inputs jacks. Turn OFF the RM.416 before changing the positon of the LINE LEVEL SELECTOR SWITCH.
When connectng turntables with magnetc cartridges to these jacks set the switch to PHONO, and when using line level
input devices set the switch to AUX.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshootng
4.
troubleshootng
Problem / Symptom
Possible cause / Soluton
no Sound.
Is the power ON? Based on your connectons, check that you
have properly set the INPUT SELECTOR SWITCH. Make sure that
the GAIN, CHANNEL FADER, and MASTER VOLUME are turned
up. Make sure the channels are properly assigned to the
crossfader.
no Sound-headphones.
Check the CUE VOLUME, CUE MIX, and CUE buton setngs.
Mixer sounds noisy.
If a microphone is not being used, move the Mic switch to the
OFF positon and turn all its related controls down.
Microphone doesn’t work.
Is the Mic GAIN turned up? Does the microphone require
phantom power? This mixer does not provide microphone
phantom power.
Sound is distorted-line input.
Turn down the channel GAIN. Check EQ setngs.
Sound is distorted-Phono input.
Only plug turntables into this input, do not plug in CD players or
other line level sources. Turn down the channel GAIN and check
EQ setngs.
i hear hum.
Make sure you are using good shielded audio cables. Some less
expensive audio cables can be susceptble to hum and
interference. Keep your audio cables away from AC power cables
and AC transformers. Make sure the mixer is not mounted too
close to high power amplifiers or lightng equipment power
supplies or ballasts. Make sure your turntables are properly
grounded to the back of the mixer if they include a grounding
wire.
i hear feedback.
If you are using a microphone, make sure that you are not too
close to the speakers or headphones. If you hear feedback on
the Phono Input, then the turntable may be mounted to close
to the speakers and/or subwoofer. Also, make sure the turntable
base is placed on a surface that does not vibrate or resonate
easily when the speakers are turned up loudly.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Specificatons
Specificatons
1. geneRal Section:
PRODUCT
Professional Mixer
AC 100 - 240V, 50/60 Hz
21 W
POWER SOURCE
POWER CONSUMPTION
DIMENSIONS (H x W x D)
WEIGHT
136.8 mm x 482 mm x 177 mm
4.5 kg
2. inPut/outPut iMPeDance & SenSitiVitY: (EQ FLAT, MAXIMUM GAIN, CUE MIXING CENTER, LOAD=100 k ohm)
2.1 input impedance and Reference level:
Line
20k ohm /-14 dBV +/-0.1 dB (200 mV)
47k ohm /-14 dBV +/-0.1 dB (200 mV)
47k ohm /-50 dBV+/-0.1 dB (2 mV)
10k ohm /-54 dBV+/-0.1 dB (2 mV)
Aux
Phono
Mic 1,2,3
2.2 output impedance and level:
Rec
1k ohm /-10 dBV (316 mV) +/-2 dB
Master Unbal.
Master Bal.
Zone
300 ohm /0 dBV (1V) +/-2 dB
600 ohm /+4 dBm (+1.23 V) +/-2 dB@ LOAD= 600 ohm
600 ohm /+4 dBm (1.23 V) +/-2 dB @ LOAD= 600 ohm
600 ohm /+2 dBm (975 mV) +/-2 dB @ LOAD= 600 ohm
33 ohm /+9.5 dBV (3 V) +/-2 dB @ LOAD= 32 ohm
Subwoofer
Phones
3. FReQuencY ReSPonSe: (EQ FLAT, MAXIMUM GAIN, MASTER OUTPUT, LOAD= 100k ohm)
Line, Aux
Phono
Mic
25 - 20 kHz +/-2 dB
25 - 20 kHz +2/-3 dB (RIAA)
25 - 20 kHz +2/-3 dB
4. thD + n: (EQ FLAT, MAXIMUM GAIN, w/ 20 kHz LPF, MASTER OUTPUT, LOAD=100k ohm)
Line, Aux
Phono
Mic
Less than 0.05%
Less than 0.15% @ 1 kHz (A-WEIGHTED)
Less than 0.15% @ 1 kHz (A-WEIGHTED)
5. MaxiMuM inPut: (1 kHz, MASTER OUTPUT, THD= 1%, EQ FLAT, MAXIMUM GAIN)
Line, Aux
More than +4 dBV
Phono
More than -36 dBV
More than -36 dBV
Mic
6. MaxiMuM outPut: (EQ FLAT, MAXIMUM GAIN, THD= 1%, LOAD= 100k ohm)
Master, Zone
Rec:
More than +18 dBV (8.0V)
More than +8 dBV (2.5V)
Phones
More than +9.5 dBV (3.0V) @ LOAD=32 ohm
7. S/n Ratio: (MAXIMUM GAIN, EQ FLAT, W/20 kHz LPF, A-WEIGHTED, MASTER OUTPUT)
Line, Aux
Phono
Mic
More than 80 dB
More than 69 dB
More than 64 dB
8. cRoSStalk: (MAXIMUM GAIN, EQ FLAT, W/20 kHz LPF, A-WEIGHTED, MASTER OUTPUT)
Line, Aux, Phono More than 70 dB @ 1 kHz between L and R channel
More than 70 dB @1 kHz between channels
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Specificatons - contnuaton
9. eQ
MIC 1/2
12 +/- 3 dB, -12 +/- 3 dB, at 100 Hz
12 +/- 3 dB, -12 +/- 3 dB, at 1 kHz
12 +/- 3 dB, -12 +/- 3 dB, at 10 kHz
10 +/- 2 dB, below -25 dB at 70 Hz
10 +/-2 dB, below -25 dB at 1 kHz
10 +/-2 dB, below -15 dB at 13 kHz
Within 3 dB, from 0 to -40 dB
MIC 3/CHANNEL
10. channel Balance
11. FaDeR kill
More than 75 dB at 1 kHz for CHANNEL FADER
More than 70 dB at 1 kHz for CROSSFADER
12. uSB Section: (EQ FLAT, W/ 20 kHz LPF, MASTER OUTPUT, LOAD=100k ohm)
PlaYBack:
OUTPUT
0 dBV (1V) +/-2 dB (-20 dBfs, 1 kHz, MAXIMUM GAIN.)
Less than 0.06% (0 dBfs, 1 kHz, MASTER= 0 dBV OUT)
31 - 20 kHz +/- 2 dB (GAIN AT CENTER)
THD+N
FREQUENCY RESPONSE
S/N RATIO
More than 80 dB (A-WEIGHTED, GAIN AT CENTER)
More than 65 dB at 1 kHz (0 dBfs, A-WEIGHTED, GAIN AT CENTER)
CH SEPARATION
RecoRDing anD PlaYBack: (LINE 1 kHz,-14 dBV INPUT, GAIN MAXIMUM)
OUTPUT
THD+N
4 dBV (1.57 V) +/- 2 dB
Less than 0.15%
8
Download from Www.Somanuals.com. All Manuals Search And Download.
notes
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Registraton card
thank you for choosing Stanton!
Your satsfacton is extremely important to us. We proudly stand behind the quality of our work and appreciate that you put your trust in us.
Registering your product will help us guarantee that you are kept up to date on our latest advances.
Warranty Service in the united States:
Please contact Stanton Tech Support BEFORE sending your product. In some cases, our Tech Support team can resolve your problem immediately,
avoiding down tme due to shipping delays. However, if Tech Support determines that a repair is needed; please call us at +1 (954) 949-9600 to
obtain a Return Authorizaton Number (RA#) PRIOR to shipping your product to us.
Warranty Service outside the united States:
To initate a warranty repair, please contact the authorized Stanton dealer from whom you purchased your product, and follow the dealer’s return
policy.
Save your shipping boxes and all packaging materials!
For the fastest and safest product return to Stanton, please use the original shipping carton and packaging materials. Stanton cannot be responsible
for any damages incurred during the shipping process due to poor or inadequate packing. Please remember to insure your shipment!
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Stanton Warranty
Stanton Warranty
Through Stanton's authorized dealers around the World, Stanton, or one of Stanton's authorized distributors outside the U.S., will, without charge,
repair or replace, at the sole discreton of the entty responsible for making the repair or providing the replacement, any Stanton merchandise
proved defectve in material or workmanship for a period of one (1) year following the date of original purchase. Exceptons to this warranty are
as noted below:
The warranty for mechanical parts which are subject to wear and tear are limited to either the earlier of thirty (30) days following the date of
original purchase or for 10,000 cycles for switches.
Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. Repairs made necessary by reason
of misuse, alteraton, normal wear, or accident are not covered under this warranty.
Returns
Authorized Stanton dealers are only authorized to sell and distribute merchandise within a specific country. All goods requiring warranty repair
or replacement must be returned (freight prepaid if not hand-delivered) to the authorized Stanton dealer from whom the merchandise was
purchased and in the same country where the merchandise was purchased. For purposes of purchases made via the Internet, the merchandise
must be returned to the authorized Stanton dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser
is located and not the authorized Stanton dealer in the country where the purchaser is located or the country in which the merchandise was
received. Any returns to a non-authorized dealer or to an authorized Stanton dealer not in the same country as the merchandise was intended
to be sold or as set forth above will void this warranty.
To initate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased the merchandise, and follow such
authorized Stanton dealer's return policy.
Stanton assumes no risk and shall be subject to no liability for damages or loss resultng from the specific use or applicaton made of the
merchandise. Stanton's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product
liability, and relatng to the merchandise shall not exceed the price received by Stanton from your purchase of such merchandise. In no event will
Stanton be liable for any special, incidental or consequental damages (including loss of use, loss of profit and claims of third partes) however
caused, whether by the negligence of Stanton or otherwise. To the extent permited by law and except as otherwise provided above, Stanton
disclaims any express or implied warrantes of merchantability or fitness for a partcular purpose.
The above warranty provides you with specific legal rights. You may also have additonal rights, which are subject to variaton from state to state
and country to country.
If there is a dispute regarding the warranty of merchandise that does not fall under the warranty conditons stated above, please include a writen
explanaton with the merchandise when returned pursuant to the terms and conditons set forth herein.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © 2009 Stanton Magnetcs, Inc.
RM.416 and STR8.150, are trademarks or registered trademarks of the Stanton Group.
All other trademarks are property of their respectve owners, who are in no way affiliated with Stanton DJ or
SC System products. All informaton included in the User Manual is subject to change without notce.
+1 (954) 949-9600
LITS00063 12/16/2009
Download from Www.Somanuals.com. All Manuals Search And Download.
|