Owner's
Manual
! WARNING !
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
55-4700
Pat. No. D382,319
Other Patents Applied
and Are Pending
MADE IN CHINA
CAUTION:
Weight on this product should not exceed 300 lbs.
Product May Vary Slightly
From Pictured.
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service Number
1 (800) 375-7520
2007, 12
2007 Stamina Products, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
CALL US FIRST
THANK YOU FOR PURCHASING THE
AeroPilates Premier Studio
To help you get started, we have pre-assembled most of your
AeroPilates Premier Studio at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
With regular workouts you will be getting your body into shape
and on your way to achieving a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Thursday, 7:30 A.M. - 5:00 P.M. Central Time.
Friday, 8:00 A.M. - 3:00 P.M., Central Time.
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for choosing the AeroPilates Premier
Although Stamina constructs its products with the
Studio. We take great pride in producing this quality finest materials and uses the highest standards of
product and hope it will provide many hours of quality manufacturing and quality control, there can
exercise to make you feel better, look better and enjoy sometimes be missing parts or incorrectly sized
life to its fullest.
parts. If you have any questions or problems with
Yes, it's a proven fact that a regular exercise the parts included with your AeroPilates Premier
program can improve your physical and mental Studio, please do not return the product. Contact
health. Too often, our busy lifestyles limit our time us FIRST!
and opportunity to exercise. The AeroPilates
If a part is missing or defective, please call us toll
Premier Studio provides a convenient and simple free at 1-800-375-7520 (in the U.S.). Our Customer
method to begin your assault on getting your body in Service Staff is available to assist you from 7:30A.M.
shape and achieving a happier and healthier lifestyle. to 5:00 P.M. (Central Time) Monday through Thursday
Before reading further, please review the drawing and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
below and familiarize yourself with the parts that are
labeled.
If you would like to contact us online, go to our
Read this manual carefully before using the Customer Service section.
AeroPilates Premier Studio.
Be sure to have the name and model number of
the product available when you contact us.
Front Cover
Left Pulley Hook
Pulley Riser
Rear Cover
Pulley Set
Warning
Label
Rope
Hand Strap
Foam Pad
Headrest
Pulley Riser
Right Pulley
Hook
Cushion
Rear Stand
Cardio
Rebounder
Rear Frame
Carriage
Pull Pin
Front Cover
Locking Knob
Wheel
Middle Stand
Connection Bar
Tension Cord
Front Frame
Front Stand
Footbar
Headpad
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY :
Combination Wrench
Socket Wrench
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUIPMENT WARNING & NOTICE LABELS
This chart is provided to help identify the warning & notice labels on the AeroPilates Premier Studio.
Please take a moment to familiarize yourself with all of the warning & notice labels.
Label is larger than actual size
W1
WARNING LABEL(61)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers, the
end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the
length of the bolts and screws.
3/16"
1/4"
1
5/16"
3/8"
1/2
1/2"
INCHES
0
0
1/2
1/2
2
3
1/2
4
1/2
5
1/2
6
in.
mm.
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
length
MILLIMETERS
6
8
10
12
NOTICE: The length of all bolts and screws except those with flat heads is
measured from below the head to the end of the bolt or screw.
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.
length
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
Part No. and Description
Qty
38
Screw, Round Head (M5 x 0.8 x 25mm)
4
42
Nylock Nut (M8 x 1.25)
2
6
47
26
Washer (M8)
Locking Knob
4
27
28
Plastic Wheel
2
4
Rubber Foot
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at :
REAR
Fin
Fin
Double
Double
Flanges
Flanges
FRONT
STEP 1
Connect the REAR STAND(55), the narrower one, to the MIDDLE STAND(54) with two CONNECTION
BARS(56), inserting the fins on the CONNECTION BARS(56) into the gaps in the double flanges on the
STANDS(55, 54). Then lock the CONNECTION BARS(56) in the place by inserting the PULL PINS(59)
through the double flanges. Repeat to connect the FRONT STAND(53) to the MIDDLE STAND(54).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 2
Remove your AeroPilates Premier Studio from its packaging placing the product on its side, with the
LOCKING PIN(29) side upward. Remove the LOCKING PIN(29) and unfold the MAIN FRAME ASSEMBLY
separating the half that has the attached LOCKING PIN(29). When completed, the frame should be separated
approximately three feet at the end.
STEP 3
Attach the four RUBBER FEET(28) to the FRONT FRAME(1) and REAR FRAME(2) with ROUND HEAD
SCREWS(M5x0.8x25mm)(38).Attach the WHEELS(27) to the FRONT FRAME(1) with WASHERS(M8)(47)
and NYLOCK NUTS(M8x1.25)(42).
STEP 4
Unfold your AeroPilates Premier Studio to a flat position by moving the FRONT FRAME(1) away from
the platform end of the product in a clockwise position until fully extended.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 5: Remove the paper covering from the foam tape inside the FRONT COVER(3) and REAR COVER(4).
Place the FRONT COVER(3) over the FRONT FRAME(1). Place the REAR COVER(4) over the REAR
FRAME(2). Press the covers securely in place.
STEP 6: Make sure that the threaded holes in the FOOTBAR(5) are facing toward the end of the
AeroPilates Premier Studio as shown in the illustration. Insert the FOOTBAR(5) into the mounting holes
located in the FRONT COVER(3) and FRONT FRAME(1). Insert the FOOTBAR(5) all the way to the bottom
and lock it in place with the LOCKING KNOBS(26).
NOTE: You can choose to insert the CARDIO REBOUNDER(50) into the FRONT FRAME(1) and lock in
position with the LOCKING KNOBS(26). Refer to the inset drawing.
STEP 7: Insert the PULLEY RISERS(25) into the mounting holes in the REAR COVER(4) and REAR
FRAME(2). Insert the PULLEY RISERS(25) all the way to the bottom, align the threaded holes in the
PULLEY RISERS(25) with the holes in the REAR FRAME(2), and lock the PULLEY RISERS(25) in position
with the LOCKING KNOBS(26).
STEP 8: Refer to the detail drawing above showing an enlarged view of the left PULLEY RISER(25) and
the LEFT PULLEY HOOK(23). With the pulley facing down, insert the LEFT PULLEY HOOK(23) into the
left PULLEY RISER(25) from the inside as shown. Swing the pulley forward as shown and the LEFT PULLEY
HOOK(23) will be in position for use. Use the same procedure to install the RIGHT PULLEY HOOK(24) on
the right PULLEY RISER(25).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
(55) Rear Stand
( Narrower )
Slots
(53) Front Stand
( Wider )
STEP 9
Insert the FOAM PAD ASSEMBLIES(16) into the holes located on the CARRIAGE(7). Place the HAND
STRAPS(20) onto the FOAM PAD ASSEMBLIES(16) for storage.
STEP 10
Refer to the inset drawing. To prevent the CARRIAGE(7) from moving while placing the AeroPilates
Premier Studio onto its stand, attach one of the TENSION CORDS(10) in the slot on the FRONT FRAME(1).
Place the AeroPilates Premier Studio onto the stand as shown in the illustration.
NOTE:
The rubber feet of the AeroPilates Premier Studio must fit into the FRONT STAND(53) and the
REAR STAND(55). The FRONT STAND(53) is wider than the REAR STAND(55). The footbar end
of your AeroPilates Premier Studio will fit into the top of the FRONT STAND(53) and the headrest
end of your AeroPilates Premier Studio will fit into the REAR STAND(55).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
The resistance of the CARRIAGE(7) can be adjusted by
securing the TENSION CORDS(10) in the slots on the FRONT
FRAME(1). You can achieve various levels of resistance by
securing different numbers of the TENSION CORDS(10) in
the slots.
Slots
NOTE:
Over time your TENSION CORDS(10) will relax. To
increase resistance in the TENSION CORDS(10),
stretch and re-tie the tension cords in a more taut
position.
A
ROPE LENGTH ADJUSTMENT
B
The ROPES(18) feed through the PULLEY SETS(22) then
thread through the loops on the underside of both outer edges
of the CARRIAGE(7). PLASTIC SNAP HOOKS(19) on the
end of each rope are used to adjust the ROPE(18) length. If
more length is needed, attach the PLASTIC SNAP HOOKS
(19) to loop D. To shorten, bring the ROPES(18) around the
last loop D and secure to loops A, B, or C with the PLASTIC
SNAP HOOKS(19). Wrap ROPES(18) through the loops and
attach where needed to shorten ROPES(18) even more.
C
D
HEADREST ADJUSTMENT
The HEADREST(14) on the CARRIAGE(7) can be positioned
flat or at an incline by simply pivoting the support bracket
underneath the HEADREST(14).
WARNING:
Always ensure that the HEADREST(14) and support bracket
are correctly positioned before use.
Support
Bracket
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
HEADPAD ADJUSTMENT AND USE
The HEADPAD(60) is designed to support the natural curve
of your neck. It can be used to provide comfort, support and
postural alignment for reformer exercises that are performed
while lying on your back. Do not use the HEADPAD(60) for
exercises that require you to lift your hips higher than your
head.
With the HEADREST(14) in the flat position, place the
HEADPAD(60) on top of the HEADREST(14) with the thickest
part of the HEADPAD(60) under your neck. Make sure that
the elastic strap on the HEADPAD(60) is around the
HEADREST(14).
Make sure that both FOAM PADS(16) are in
the carriage when using the HEADPAD(60)
attached to the HEADREST(14).
STORAGE
1. Store the AeroPilates Premier Studio in a clean, dry place.
2. It is recommended that two people be available to move the AeroPilates Premier Studio.
3. To move the AeroPilates Premier Studio: First, attach one of the TENSION CORDS(10) in the slot
on the FRONT FRAME(1) to prevent the CARRIAGE(7) from moving. Second, grasp the FRONT and
REAR FRAME(1, 2) to remove the AeroPilates Premier Studio from its stand. Third, lift up the
AeroPilates Premier Studio from the REAR FRAME(2) to move the AeroPilates Premier Studio
with the transport wheels on the FRONT FRAME(1). Fourth, grasp both ends of the stand to move it.
MAINTENANCE
The safety and integrity designed into the AeroPilates Premier Studio can only be maintained when the
AeroPilates Premier Studio is regularly examined for damage and wear. Special attention should be
given to the following:
1. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
2. Worn or damaged components should be replaced immediately or the AeroPilates Premier Studio
removed from service until repair is made.
3. Verify that the WARNING LABEL(61) is present and legible. Replace the WARNING LABEL(61) if it is
missing or damaged.
4. Verify that the ROPES(18) are properly installed on the PULLEY SETS(22).
5. Check the condition of the ROPES(18) and replace if they are frayed or worn.
6. Check the PLASTIC SNAP HOOKS(19) on the ends of the ROPES(18). Replace the ROPES(18) if
PLASTIC SNAP HOOKS(19) are damaged or deformed.
7. Check the TENSION CORDS(10). If a TENSION CORD(10) is stretched and loose, re-tie the knot on
the end of the cord. Replace TENSION CORDS(10) that are frayed or worn.
8. Check the BUNGEE CORD(52) on the CARDIO REBOUNDER(50) for wear. Replace the CARDIO
REBOUNDER(50) if the BUNGEE CORD(52) is frayed or worn.
9. Check the PULLEY SETS(22) for excessive wear. Replace worn PULLEY SETS(22).
10. Check the HAND STRAPS(20) for damage. Replace damaged parts.
11. Check the FOAM SLEEVE(6) and FOAM PADS(16) and replace if damaged or worn.
12. Check the STOP PLATES(30, 31) for looseness or damage and replace any damaged parts.
13. Check the CUSHION(13) and replace if it is damaged or worn.
14. Check and clean the ROLLERS(8) and the rolling surfaces on the rails. Clean by wiping with a dry cloth.
15. Only Stamina Products supplied components shall be used to maintain/repair the AeroPilates Premier
Studio.
16. Keep your AeroPilates Premier Studio clean by wiping with an absorbent cloth after use.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
How you begin your exercise program depends on your physical condition. If you have been inactive for
several years or are severely overweight, start slowly and increase your workout time gradually. Increase
your workout intensity gradually, too, by monitoring your heart rate while you exercise.
Remember to follow these essentials:
Have your doctor review your training and diet programs.
Begin your training program slowly with realistic goals that have been set by you and your physician.
Warm up before you exercise and cool down after you work out.
Take your pulse periodically during your workout and strive to stay within a range of 60% (lower
intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity and
build up to higher intensity as you become more aerobically fit.
If you feel dizzy or lightheaded you should slow down or stop exercising.
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise so
you don’t tire too quickly.
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table below.
For effective aerobic exercise, your heart rate should be maintained at a level between 60% and 90% of
your maximum heart rate. If just starting an exercise program, work out at the low end of your target heart
rate zone. As your aerobic capacity improves, gradually increase the intensity of your workout by increasing
your heart rate.
Measure your heart rate periodically during your workout by stopping the
exercise but continuing to move your legs or walk around. Place two or three
fingers on your wrist and take a six second heartbeat count. Multiply the
results by ten to find your heart rate. For example, if your six second heartbeat
count is 14, your heart rate is 140 beats per minute. A six second count is
wrist pulse
used because your heart rate will drop rapidly when you stop exercising.
Adjust the intensity of your exercise until your heart rate is at the proper level.
Target Heart Rate Zone Estimated by Age*
Target Heart Rate Zone
(55%-90% of Maximum Heart Rate)
Average Maximum
Heart Rate 100%
Age
20 years
25 years
30 years
35 years
40 years
45 years
50 years
55 years
60 years
65 years
70 years
110-180 beats per minute
107-175 beats per minute
105-171 beats per minute
102-166 beats per minute
99-162 beats per minute
97-157 beats per minute
94-153 beats per minute
91-148 beats per minute
88-144 beats per minute
85-139 beats per minute
83-135 beats per minute
200 beats per minute
195 beats per minute
190 beats per minute
185 beats per minute
180 beats per minute
175 beats per minute
170 beats per minute
165 beats per minute
160 beats per minute
155 beats per minute
150 beats per minute
*For cardiorespiratory training benefits, theAmerican College of Sports Medicine recommends working
out within a heart rate range of 55% to 90% of maximum heart rate. To predict the maximum heart
rate, the following formula was used: 220 - Age = predicted maximum heart rate
13
Download from Www.Somanuals.com. All Manuals Search And Download.
WARM-UP and COOL-DOWN
Warm-Up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm
up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise your
heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump
rope, and running in place
Stretching Stretching while your muscles are warm after a proper warm-up and again after your strength
or aerobic training session is very important. Muscles stretch more easily at these times because of their
elevated temperature, which greatly reduces the risk of injury. Stretches should be held for 15 to 30 seconds.
Do not bounce.
Suggested Stretching Exercises
Lower Body Stretch
Place feet shoulder width
apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs.
Floor Stretch
While sitting on the floor,
open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds.
DO NOT BOUNCE!
When the pull on the back of
the legs lessen, try a lower
position gradually.
DO NOT BOUNCE!
Do this stretch 10 times.
Repeat the stretch with the
left leg.
Bent Torso Pulls
Bent Over Leg Stretch
Stand with feet shoulder-
width apart and lean forward
as illustrated. Using the
arms, gently pull the upper
body towards the right leg.
Let the head hang down.
DO NOT BOUNCE!
Hold the position a minimum
of 10 seconds. Repeat
pulling the upper body to the
left leg. Do this stretch
several times slowly.
While sitting on the floor,
have legs apart one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.
Remember always to check with your physician before starting any exercise program.
Cool-Down The purpose of cooling down is to return the body to its normal, or near normal, resting state
at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows blood to
return to the heart. Your cool-down should include the stretches listed above and should be completed after
each strength-training session.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
MODEL 55-4700
WARRANTY
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on the parts and three years on the
frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT
APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE,
ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAIR,
REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED BY STAMINA
PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health clubs, spas,
gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the product's use is
in furtherance of a profit making enterprise, and all other use which is not for personal, family, or household
purposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase and
a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield
Missouri, USA, 65801-1071 or call us at 1 (800) 375-7520. If the defect is covered under this limited
warranty, you will be requested to return the product or part to us for free repair or replacement at our option.
NO ACTION FOR BREACH OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE
(1) YEAR AFTER THE DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED.
NO ACTION FOR BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE
(1) YEAR AFTER DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not
transferable. IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED
WARRANTY OR ANY IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE
EXCLUSIVE REMEDY AVAILABLE TO YOU. In the event that the purchaser makes any claim under this
limited warranty or any implied warranty, the Warrantor reserves the right to require the product to be returned
for inspection, at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of
the enclosed warranty registration card is not required for warranty coverage, but is merely a way of
establishing the date and place of purchase.
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,
SPECIAL OR INCIDENTALDAMAGESDUE TO BREACH OF THEABOVE WARRANTY ORANY IMPLIED
WARRANTY.
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This warranty
gives you specific legal rights, and you may also have other legal rights which vary from state to state.
ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED INDURATION TO THE
DURATION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods to
disclaim or limit implied warranties and consequential and incidental damages with respect thereto. If any
such law is found to be applicable, the foregoing disclaimers and limitations of and on implied warranties and
consequential and incidental damages with respect thereto shall be disregarded and shall be deemed not to
have been made to the extent necessary to comply with such legal restriction.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT PARTS DRAWING
BACK
FRONT
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
DIAGRAM#
PART NAME
QTY
1
2
3
4
5
6
7
8
Front Frame
Rear Frame
Front Cover
Rear Cover
Footbar
Foam Sleeve
Carriage
Roller
Roller Spacer
Tension Cord
Support Bushing
Stop Bushing
Cushion
Headrest
Foam Pad Tube
Foam Pad
Foam Cap
Rope
1
1
1
1
1
1
1
4
4
4
4
4
1
1
2
2
2
2
2
2
2
2
1
1
2
4
2
4
1
2
2
4
4
2
1
7
4
4
3
4
2
12
7
4
7
2
20
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Plastic Snap Hook
Hand Strap
Grip Pad
Pulley Set
Left Pulley Hook
Right Pulley Hook
Pulley Riser
Locking Knob
Wheel
Rubber Foot
Locking Pin
Stop Plate
Small Stop Plate
Stop Pad
Round Plug (25mm)
Shaft Bolt, Socket Head (M8 x 1.25 x 20mm)
Bolt, Socket Head/w hole (M8 x 1.25 x 20mm)
Bolt, Socket Head (M8 x 1.25 x 20mm)
Bolt, Round Head (M8 x 1.25 x 25mm)
Screw, Round Head (M5 x 0.8 x 25mm)
Screw, Flat Head (M5 x 0.8 x 25mm)
Acorn Nut (M5 x 0.8)
Nylock Nut (M6 x 1)
Nylock Nut (M8 x 1.25)
Nylock Nut (M5 x 0.8)
Nut (M8 x 1.25)
Washer (M5)
Washer (M6)
Washer (M8)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
DIAGRAM#
PART NAME
QTY
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
Washer (M10)
4
4
1
1
1
1
1
1
4
6
6
8
1
1
1
1
1
1
1
1
Lock Washer (M8)
Cardio Rebounder
Mat
Bungee Cord
Front Stand
Middle Stand
Rear Stand
Connection Bar
Endcap
Large Washer (2 3/8" diameter)
Pull Pin
Headpad
Warning Label
Combination Wrench
Socket Wrench
Manual
Workout Chart
AeroPilates Level 1 Workout (DVD)
AeroPilates Cardio Workout (DVD)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX/MAIL ORDERING FORM
Please do not return the product. For your convenience, Stamina has a Customer Service Department with
a toll-free number. Should a part be missing or a defective part found, please call 1 (800) 375-7520
(in the U.S.) from 7:30A.M. to 5:00 P.M. Central Time, Monday through Thursday and 8:00A.M. to 3:00 P.M.
on Friday or fill out the fax sheet ordering form below and fax it to (417) 889-8064. Our Customer Service
Department will be able to assist you with your problem and the part will be mailed directly to your house.
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
Detach and Mail or Fax the Form Below
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Mr./Ms:
Address:
City:
Apt. #:
Zip Code:
State:
IMPORTANT: We must have your phone number in order to process the order!
Phone #: (
)
Work Phone #: (
)
Date Purchased:
Model #:
Purchased From:
IMPORTANT : Before filling out the form below make sure you have the right information.
Refer to the parts list to make sure you're ordering the right parts!
PART #
1
DESCRIPTION
QUANTITY
1
EXAMPLE:
Rear Unit Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|