Owner's
Manual
WARNING
!
!
Exercise can present a
health risk. Consult a
physician before beginning
any exercise program with
this equipment. If you feel
faint or dizzy, immediately
discontinue use of this
equipment. Serious bodily
injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur
if all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
securely tightened prior to
each use. Follow all safety
instructions in this manual.
When calling for parts or
service, please specify
the following number:
Product May Vary Slightly From Pictured.
Model#: 15-9300
CAUTION:
Weight on this product should not exceed 300 lbs.
This Product is Produced Exclusively by
STAMINA PRODUCTS
MADE IN CHINA
2040 N. Alliance, Springfield, MO 65803
Customer Service
2010 Stamina Products, Inc.
2010, 08
©
1 (800) 375-7520
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Us First
1C(8us0t0om)3er7S5e-r7v5ic2e0
THANK YOU FOR PURCHASING THE
CPS 9300 Indoor Cycle
To help you get started, we have pre-assembled most of your
CPS 9300 Indoor Cycle at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
With regular workouts, you will be getting your body into shape
and be on your way to achieving a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.
Friday, 8:00 A.M. - 3:00 P.M., Central Time.
TELEPHONE
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for choosing the CPS 9300 Indoor
Although Stamina constructs its products with
Cycle. We take great pride in producing this the finest materials and uses the highest standards
quality product and hope it will provide many hours of manufacturing and quality control, there can
of quality exercise to make you feel better, look sometimes be missing parts or incorrectly sized
better, and enjoy life to its fullest.
parts. If you have any questions or problems with
It's a proven fact that a regular exercise program the parts included with your CPS 9300 Indoor
can improve your physical and mental health. Cycle, please do not return the product. Contact
Too often, our busy lifestyles limit our time and us FIRST!
opportunity to exercise. The CPS 9300 Indoor
If a part is missing or defective, please call
Cycle provides a convenient and simple method to us toll free at 1-800-375-7520 (in the U.S.). Our
begin your assault on getting your body in shape Customer Service Staff is available to assist you
and achieving a happier and healthier lifestyle.
from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
Before reading further, please review the through Thursday and 8:00 A.M. to 3:00 P.M.
drawing below and familiarize yourself with the (Central Time) on Friday.
parts that are labeled.
If you would like to contact us online, go to our
9300 Indoor Cycle.
the Customer Service section.
Be sure to have the name and model number of
the product available when you contact us.
Meter
Tension Knob
Water Bottle
Handlebar
Adjustment Knob
Seat
Spin Bike
Warning Label
Seat Slider
Flywheel
Main Frame
Seat Post
Adjustment Knob
Guard
Wheel
Stand
Warning Label
Right Crank
Front Stabilizer
Right Pedal
Rear Stabilizer
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY :
Wrench
Allen Wrench (5mm)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUIPMENT WARNING & NOTICE LABELS
This chart is provided to help identify the warning and notice labels on the CPS 9300 Indoor Cycle.
Please take a moment to familiarize yourself with all of the warning and notice labels.
Labels are larger than actual size
W1 WARNING LABEL(70)
W2
SPIN BIKE WARNING LABEL(71)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers or
the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to
check the length of the bolts and screws.
3/16"
1/4"
5/16"
3/8"
1/2"
INCHES
0
0
1/2
1
1/2
2
1/2
3
1/2
4
1/2
5
1/2
6
in.
mm.
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
length
MILLIMETERS
6
8
10
12
NOTICE: The length of all bolts and screws, except those with flat
heads, is measured from below the head to the end of the bolt
or screw. Flat head bolts and screws are measured from the
top of the head to the end of the bolt or screw.
length
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
Part Number and Description
Qty
55
60
Bolt, Button Head (M8 x 1.25 x 15mm)
Screw, Round Head (M5 x 0.8 x 10mm)
4
2
69
79
Washer (M8)
4
2
Arc Washer (M5)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning. If you
are missing a part please call our toll-free number for assistance 1-800-375-7520 or e-mail us at
STEP 1
Make the WHEELS(49) on the FRONT STABILIZER(3) face the front, then attach the FRONT STABILIZER(3)
to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x15mm)(55) and WASHERS(M8)(69).
STEP 2
Attach the REAR STABILIZER(4) to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x15mm)
(55) and WASHERS(M8)(69).
NOTE: See page 10 for detailed leveling instructions to prevent rocking.
STEP 3
Pull the ADJUSTMENT KNOB(48), then insert the SEAT POST(5) into the MAIN FRAME(1) and secure
with the ADJUSTMENT KNOB(48).
NOTE: The pin of the ADJUSTMENT KNOB(48) must be inserted into one of the adjustment holes in the
SEAT POST(5) and the ADJUSTMENT KNOB(48) must be screwed in tight to ensure that the
SEAT POST(5) will fit securely in the MAIN FRAME(1).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 4
NOTE: The RIGHT PEDAL(17) has right hand threads and is tightened by turning clockwise. The LEFT
PEDAL(16) has left hand threads and is tightened by turning counterclockwise.
Thread the RIGHT PEDAL(17) into the RIGHT CRANK(13) as shown. Tighten the pedal securely. Do the
same to attach the LEFT PEDAL(16) to the LEFT CRANK(12).
STEP 5
Pull the ADJUSTMENT KNOB(48), then insert the HANDLEBAR(2) into the MAIN FRAME(1) and secure
with the ADJUSTMENT KNOB(48).
NOTE: The pin of the ADJUSTMENT KNOB(48) must be inserted into one of the adjustment holes in the
HANDLEBAR(2). and the ADJUSTMENT KNOB(48) must be screwed in tight to ensure that the
HANDLEBAR(2) will fit securely in the MAIN FRAME(1).
STEP 6
Place the WATER BOTTLE(73) in the WATER BOTTLE HOLDER(72).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 7
Attach the METER BRACKET(78) to the HANDLEBAR(2) with ROUND HEAD SCREWS(M5x0.8x10mm)
(60) and ARC WASHER(M5)(79).
STEP 8
Install two AA batteries into the METER(77), the batteries are not included. See page 13 for detailed
battery installation instructions. Slide the METER(77) onto the METER BRACKET(78).
STEP 9
Plug the SENSOR WIRE(76) into the connecting wire of the METER(77). Insert the sensor on the end
of the SENSOR WIRE(76) into the SENSOR CLIP(75). Find the MAGNET(74) on the FLYWHEEL(23),
adjust the position of the sensor so the gap between the sensor and the MAGNET(74) is 1/4” to 1/2” (5mm
to 10mm).
STEP 10
To avoid the sensor wires rub with the FLYWHEEL(23). Refer to detail drawing A. Use the enclosed
nylon tie to secure the sensor wires to the MAIN FRAME(1).
A.
Nylon Tie
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP INSTRUCTIONS
Place the CPS 9300 Indoor Cycle in the area where it will be used. It is recommended that the CPS 9300
Indoor Cycle be placed on an equipment mat. The CPS 9300 Indoor Cycle is approximately 51 inches
long (max.) x 18.4 inches wide x 43.6 inches tall (max.). An area 4 feet wide x 6 feet long is required for
safe operation of the CPS 9300 Indoor Cycle. Make sure that adequate space is available for access to
and passage around the CPS 9300 Indoor Cycle.
LEVELING: Adjust the STANDS(51) under the FRONT and REAR STABILIZER(3, 4) so that the CPS
9300 Indoor Cycle sits on the floor without rocking. Refer to the instructions below the
illustration.
MOVING: The CPS 9300 Indoor Cycle has a pair of WHEELS(49) on the FRONT STABILIZER(3).
Lift up the REAR STABILIZER(4) to move the CPS 9300 Indoor Cycle.
Equipment Mat
Loosen the NUTS(M8x1.25)(67) until they
touch the STANDS(51).Adjust the STANDS(51)
for leveling. Tighten the NUTS(M8x1.25)(67)
securely against the STABILIZERS(3, 4) to lock
the STANDS(51) in position.
FUNCTION INSPECTION:
Visually inspect the CPS 9300 Indoor Cycle to verify that assembly is as shown in the above illustration.
Check the function of the CPS 9300 Indoor Cycle by turning the crank slowly through one complete
revolution to verify that the drive train functions properly. Adjust the TENSION KNOB(34) to verify that the
adjustable tension is working properly.
CAUTION: Locate and read the WARNING LABELS(70, 71) on the CPS 9300 Indoor Cycle. Make sure
that all users read the WARNING LABELS(70, 71) before using.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB(34) clockwise.
To decrease the load, turn the TENSION KNOB(34)
counterclockwise.
CAUTION!
The TENSION KNOB(34) is the Emergency Brake, too. The
CPS 9300 Indoor Cycle can be stopped immediately by
pushing the TENSION KNOB(34).
SEAT HEIGHT ADJUSTMENT
Proper seat height is important for efficient exercise. To determine proper seat height, place your foot in the
toe cage of the pedal closest to the floor and mount the bike. Sit on the bike and move one of the pedals
to the down position. Your leg should be slightly bent and relaxed as shown.
If your leg is too straight or if your foot cannot touch the pedal when extended at the downstroke, you will
need to lower the seat. If your leg is bent too much, you will need to raise the seat. Loosen and pull the
ADJUSTMENT KNOB(48), then lower or raise the SEAT(43) to the desired height, and secure with the
ADJUSTMENT KNOB(48). Make all adjustments to seat height while off of the bike.
NOTE: The pin of the ADJUSTMENT KNOB(48) must be inserted into one of the adjustment holes in the
SEAT POST(5). and the ADJUSTMENT KNOB(48) must be screwed in tight to ensure that the
SEAT POST(5) will fit securely in the MAIN FRAME(1).
FORWARD/AFT POSITION OF SEAT
Adjusting the SEAT(43) forward or backward helps you work
on different lower body muscle groups.
Loosen the LOCKING KNOB(46), slide the SEAT(43) to the
desired position, and secure with the LOCKING KNOB(46).
NOTE: The LOCKING KNOB(46) should be screwed in tight
to make the SEAT SLIDER(6) fit securely in the SEAT
POST(5).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
HANDLEBAR HEIGHT ADJUSTMENT
HANDLEBAR(2) height is a matter of preference. Start with
the HANDLEBAR(2) at the same height as the seat.Adjusting
the HANDLEBAR(2) higher will give the rider a more upright
position; lowering the HANDLEBAR(2) will result in a more
prone position.
To adjust, loosen and pull the ADJUSTMENT KNOB(48), then
lower or raise the HANDLEBAR(2) to the desired height, and
secure with the ADJUSTMENT KNOB(48).
NOTE: The pin of the ADJUSTMENT KNOB(48) must
be inserted into one of the adjustment holes in
the HANDLEBAR(2). and the ADJUSTMENT
KNOB(48) must be screwed in tight to ensure that
the HANDLEBAR(2) will fit securely in the MAIN
FRAME(1).
PEDAL STRAP ADJUSTMENT
Use the following procedure to adjust the PEDAL STRAP:
1. Place the ball of each foot on the pedal and in the toe cage such that the ball of the foot is centered over
the pedal spindle and under the strap.
2. Rotate the cranks until one foot is in a position closest to you.
3. To tighten the strap, pull up on the end of the strap until it fits snugly over your shoe. Make sure that the
strap is secure, but not overly tight or pressing uncomfortably on your foot.
4. Repeat for the other foot.
5. To loosen the pedal strap, press down on the clip that holds the strap secure, and pull slightly outward.
Release the clip to lock the strap into place.
Toe Cage
Pull the Pedal Strap to tighten.
Press the clip down and pull slightly
outward to loosen the Pedal Strap.
Right Pedal(17)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
POWER ON : Pedal movement or press the button.
POWER OFF : Automatic shut off after four minutes of
inactivity.
FUNCTION BUTTON:
Press to select the function value displays of DISTANCE, TIME,
and CALORIES.
Reset all functions to zero by pressing the button and holding
it down for two seconds.
FUNCTIONS:
SPEED: Displays the current speed on upper display from zero to 999.9 miles per hour.
SCAN: Lower display automatically scans each function of TIME, DISTANCE, and CALORIES
in sequence every six seconds.
DISTANCE: Displays the distance from zero to 99.9 miles.
TIME: Displays the time from one second up to 99:59 minutes.
CALORIES: Displays the calorie consumption from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
NOTE: The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Press the button and hold it down for two seconds to reset all functions to zero.
AA Batteries
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the meter.
2. The meter operates with two AA batteries, the batteries are not
included. Refer to the illustration to install or replace the batteries.
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
3. Rechargeable batteries are not recommended.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE
1. To store the CPS 9300 Indoor Cycle, simply keep it in a clean dry place.
2. Adjust the HANDLEBAR(2) and the SEAT POST(5) to the lowest position. Adjust the SEAT SLIDER(6)
to the most forward position. The CPS 9300 Indoor Cycle is approximately 41.8 inches long (min.) x
18.4 inches wide x 38.3 inches tall (min.). These dimensions will vary. Please measure your CPS 9300
Indoor Cycle if exact dimensions are needed.
3. To move the CPS 9300 Indoor Cycle, lift the REAR STABILIZER(4) and use the WHEELS(49) on the
FRONT STABILIZER(3).
MAINTENANCE
The safety and integrity designed into the CPS 9300 Indoor Cycle can only be maintained when the
CPS 9300 Indoor Cycle is regularly examined for damage and wear. Special attention should be given
to the following:
1. Adjust the TENSION KNOB(34) and verify that the Flywheel System provides tension. The Flywheel
System should provide many years of use.
2. Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that
the left pedal has left hand threads and is tightened by turning counterclockwise. The right pedal has
right hand threads that are tightened by turning clockwise.
3. Verify that the WARNING LABEL(70, 71) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement WARNING LABEL(70, 71) if it is missing or damaged.
4. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5. Worn or damaged components shall be replaced immediately or the CPS 9300 Indoor Cycle removed
from service until repair is made.
6. Only Stamina Products supplied components shall be used to maintain/repair the CPS 9300 Indoor
Cycle.
7. Keep your CPS 9300 Indoor Cycle clean by wiping it off with an absorbent cloth after use.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
FELT BRAKE PAD RESTORATION
Over time the brake pad on your CPS 9300 Indoor Cycle may squeak during workout. Use the following
procedure to refresh the brake pad:
1. Turn the TENSION KNOB(34) counterclockwise as far as it can go (about six turns).
2. DisassembletheBRAKE(39)byremovingtheROUNDHEADSCREWS(M5x0.8x30)(59), WASHERS(M5)
(68), and NYLOCK NUTS(M5x0.8)(64).
3. Inspect the Felt Bracket Pad on the BRAKE(39) and make sure it still has a good thick felt that doesn’t
crumble off during the checking.
4. The squeak is probably due to hardening or glazing of the Felt Brake Pad. Use a hard bristle wire brush
to rough up and clean the Felt Brake Pad. Once the felt has been roughed up, trim any excess felt from
around the edges and saturate the felt with silicone spray.
5. After it is completely dry, re-install the BRAKE(39) with the same hardware from Step 2.
Felt Brake Pad
Hard Bristle
Wire Brush
Silicone Spray
Lubricant
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
How you begin your exercise program depends on your physical condition. If you have been inactive for
several years or are severely overweight, start slowly and increase your workout time gradually. Increase
your workout intensity gradually by monitoring your heart rate while you exercise.
Remember to follow these essentials:
Have your doctor review your training and diet programs.
Begin your training program slowly with realistic goals that have been set by you and your physician.
Warm up before you exercise and cool down after you work out.
Take your pulse periodically during your workout and strive to stay within a range of 60% (lower
intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity, and
build up to higher intensity as you become more aerobically fit.
If you feel dizzy or lightheaded you should slow down or stop exercising.
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise
so you don't tire too quickly.
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table
below. For effective aerobic exercise, your heart rate should be maintained at a level between 60%
and 90% of your maximum heart rate. If just starting an exercise program, work out at the low end of
your target heart rate zone. As your aerobic capacity improves, gradually increase the intensity of your
workout by increasing your heart rate.
Measure your heart rate periodically during your workout by stopping the
exercise but continuing to move your legs or walk around. Place two or
three fingers on your wrist and take a six second heartbeat count. Multiply
the results by ten to find your heart rate. For example, if your six second
heartbeat count is 14, your heart rate is 140 beats per minute. A six second
wrist pulse
count is used because your heart rate will drop rapidly when you stop
exercising. Adjust the intensity of your exercise until your heart rate is at the
proper level.
Target Heart Rate Zone Estimated by Age*
Target Heart Rate Zone
(55%-90% of Maximum Heart Rate)
Average Maximum
Heart Rate 100%
Age
20 years
25 years
30 years
35 years
40 years
45 years
50 years
55 years
60 years
65 years
70 years
110-180 beats per minute
107-175 beats per minute
105-171 beats per minute
102-166 beats per minute
99-162 beats per minute
97-157 beats per minute
94-153 beats per minute
91-148 beats per minute
88-144 beats per minute
85-139 beats per minute
83-135 beats per minute
200 beats per minute
195 beats per minute
190 beats per minute
185 beats per minute
180 beats per minute
175 beats per minute
170 beats per minute
165 beats per minute
160 beats per minute
155 beats per minute
150 beats per minute
* For cardiorespiratory training benefits, the American College of Sports Medicine recommends
working out within a heart rate range of 55% to 90% of maximum heart rate. To predict the
maximum heart rate, the following formula was used: 220 - Age = predicted maximum heart rate
16
Download from Www.Somanuals.com. All Manuals Search And Download.
WARM-UP and COOL-DOWN
The purpose of warming up is to prepare your body for exercise and to minimize injuries.
Warm-Up
Warm up for two to five minutes before strength training or aerobic exercising. Perform activities that
raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging,
jumping jacks, jump rope, and running in place
Stretching while your muscles are warm after a proper warm-up and again after your
Stretching
strength or aerobic training session is very important. Muscles stretch more easily at these times
because of their elevated temperature, which greatly reduces the risk of injury. Stretches should be held
for 15 to 30 seconds. Do not bounce.
Suggested Stretching Exercises
Lower Body Stretch
Place feet shoulder-width
apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs.
Floor Stretch
While sitting on the floor,
open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds.
DO NOT BOUNCE!
When the pull on the back of
the legs lessens, gradually
try a lower position.
DO NOT BOUNCE!
Do this stretch 10 times.
Repeat the stretch with the
left leg.
Bent Torso Pulls
Bent Over Leg Stretch
Stand with feet shoulder-
width apart and lean forward
as illustrated. Using the
arms, gently pull the upper
body towards the right leg.
Let the head hang down.
DO NOT BOUNCE!
While sitting on the floor,
have legs apart, one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent, and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.
Hold the position a minimum
of 10 seconds. Repeat
pulling the upper body to
the left leg. Do this stretch
several times slowly.
Remember to always check with your physician before starting any exercise program.
The purpose of cooling down is to return the body to its normal, or near normal, resting
Cool-Down
state at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows
blood to return to the heart. Your cool-down should include the stretches listed above and should be
completed after each strength training session.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
PART#
PART NAME
QTY
1
2
3
4
5
6
7
8
Main Frame
Handlebar
Front Stabilizer
Rear Stabilizer
Seat Post
Seat Slider
Shaft
Bearing Spacer
1
1
1
1
1
1
1
1
2
1
9
Bearing (6002RS)
Left Retaining Ring (1 3/8"-24, Left Hand Threads)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Right Retaining Ring (1 3/8"-24, Right Hand Threads) 1
Left Crank
1
1
2
2
1
1
1
1
1
2
1
1
1
1
1
2
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
Right Crank
Flange Bolt (M8 x 1 x 25mm)
Crank Cap
Left Pedal
Right Pedal
V-Ribbed Belt
Guard
Inner Guard
Guard Spacer
Pulley
Flywheel (18kg)
Left Flywheel Cover
Right Flywheel Cover
Flywheel Axle
Bearing (6001zz)
Spacer A (ø12.5 x ø15.8 x 11mm)
Spacer B (ø12.5 x ø15.8 x 51mm)
Washer (M12)
Acorn Nut (M12 x 1.75)
Left Axle Guard
Right Axle Guard
Tension Knob
Spring
Square Nut (M10 x 1.5)
Nut (M10 x 1.5)
Acorn Nut (M10)
Brake
Brake Support
Rubber Pad
Square Washer
Seat
Square Plug (30mm x 30mm)
Slider Bushing
Locking Knob
Sleeve
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
PART#
PART NAME
QTY
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
Adjustment Knob
Wheel
Oval Plug (25mm x 50mm)
Stand
Square Plug (33mm x 33mm)
Foam Tape
Carriage Bolt (M10 x 1.5 x 45mm)
Bolt, Button Head (M8 x 1.25 x 15mm)
Bolt, Socket Head (M5 x 0.8 x 10mm)
Bolt, Socket Head (M8 x 1.25 x 45mm)
Bolt, Socket Head (M8 x 1.25 x 40mm)
Screw, Round Head (M5 x 0.8 x 30mm)
Screw, Round Head (M5 x 0.8 x 10mm)
Screw, Round Head (M5 x 10mm)
Screw, Round Head (M5 x 15mm)
Flange Screw, Round Head (M5 x 0.8 x 20mm)
Nylock Nut (M5 x 0.8)
Nylock Nut (M8 x 1.25)
Nut (M6 x 1)
Nut (M8 x 1.25)
Washer (M5)
Washer (M8)
Warning Label
Spin Bike Warning Label
Water Bottle Holder
Water Bottle
Magnet
Sensor Clip
2
2
4
4
1
12
1
8
8
2
2
2
3
6
6
2
2
2
2
4
12
8
1
1
1
1
1
1
1
1
1
2
1
1
1
Sensor Wire
Meter
Meter Bracket
Arc Washer (M5)
Wrench
Allen Wrench (5mm)
Manual
20
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
MODEL 15-9300
WARRANTY
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on the parts and three years on
the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL
NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE,
MISUSE, ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY
REPAIR, REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED
BY STAMINA PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health
clubs, spas, gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the
product's use is in furtherance of a profit making enterprise, and all other use which is not for personal,
family, or household purposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase
and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071,
call us at 1-800-375-7520. If the defect is covered under this limited warranty, you will be requested to
return the product or part to us for free repair or replacement at our option. NO ACTION FOR BREACH
OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER THE
DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED. NO ACTION FOR
BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER
DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not transferable. IF
ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED WARRANTY OR ANY
IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY
AVAILABLE TO YOU. In the event that the purchaser makes any claim under this limited warranty or any
implied warranty, the Warrantor reserves the right to require the product to be returned for inspection,
at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of the enclosed
warranty registration card is not required for warranty coverage, but is merely a way of establishing the
date and place of purchase.
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS
OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,
SPECIAL OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY
IMPLIED WARRANTY.
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This
warranty gives you specific legal rights, and you may also have other legal rights which vary from state
to state. ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO
THE DURATION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods
to disclaim or limit implied warranties and consequential and incidental damages with respect thereto.
If any such law is found to be applicable, the foregoing disclaimers and limitations of and on implied
warranties and consequential and incidental damages with respect thereto shall be disregarded and shall
be deemed not to have been made to the extent necessary to comply with such legal restriction.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
22
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX/MAIL ORDERING FORM
Please do not return the product. For your convenience, Stamina's Customer Service Department can be
reached by email at [email protected] or toll free at 1-800-375-7520 (in the U.S.).
Should a part be missing or a defective part found, please call us from 7:30 A.M. to 5:00 P.M. Central
Time, Monday through Thursday and 8:00 A.M. to 3:00 P.M. on Friday or fill out the fax sheet ordering
form below and fax it to (417)889-8064. Our Customer Service Department will be able to assist you with
your problem and the part will be mailed directly to your house.
TELEPHONE
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
Detach and Mail or Fax the Form Below
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Mr./Ms:
Address:
City:
Apt. #:
Zip Code:
State:
IMPORTANT : We must have your phone number in order to process the order!
Work Phone #: (
Phone #: (
)
)
Date Purchased:
Model #:
Purchased From:
IMPORTANT : Before filling out the form below make sure you have the right information.
Refer to the parts list to make sure you're ordering the right parts!
PART #
1
DESCRIPTION
QUANTITY
1
EXAMPLE:
Rear Unit Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|