Sharp Stereo System XL UH06H User Manual

ENGLISH  
MODEL  
XL-UH06H  
MICRO COMPONENT SYSTEM  
OPERATION MANUAL  
XL-UH06H Micro Component System consisting of XL-UH06H (main unit) and CP-UH06H (speaker system).  
Accessory  
Volume control  
Please confirm that only the following accessory is  
included.  
The sound level at a given volume setting depends on  
speaker efficiency, location and various other factors. It is  
advisable to avoid exposure to high volume levels. Do not  
turn the volume on to full at switch on. Listen to music at  
moderate levels.  
Remote control x 1  
(92L34900016601)  
Special note  
Supply of this product does not convey a license nor imply any right to distribute content created with this product in  
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating  
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution  
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact  
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for  
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.  
*=92L875000166024D*|  
92L87500016602  
13E R MW 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System connections  
The ventilation should not be impeded by covering the  
ventilation openings with items, such as newspapers,  
tablecloths, curtains, etc.  
No naked flame sources, such as lighted candles,  
should be placed on the apparatus.  
Attention should be drawn to the environmental  
aspects of battery disposal.  
This unit should only be used within the range of 5°C  
- 35°C (41°F - 95°F).  
Precautions  
Please ensure that the equipment is positioned in a  
well ventilated area and ensure that there is at least  
10 cm (4”) of free space along the sides, top and back  
of the equipment.  
10 cm (4”) 10 cm (4”)  
10 cm (4”)  
The apparatus is designed for use in moderate  
climates.  
10 cm (4”)  
Speaker connection  
Use the unit on  
vibration.  
Place the speakers at least 30 cm (12”) away from any  
CRT TV to avoid colour variations across the TV screen.  
If the variations persist, move the speakers further away  
from the TV. LCD TV is not prone to such variation.  
a
firm, level surface free from  
Keeptheunitawayfromdirectsunlight, strongmagnetic  
fields, excessive dust, humidity and electronic/electrical  
equipment (home computers, facsimiles, etc.) which  
generate electrical noise.  
Fully insert the speaker wires into the speaker  
terminals.  
Use speakers with an impedance of 4 ohms or more,  
as lower impedance speakers can damage the unit.  
Do not make a mistake when connecting the right and  
left speakers. The right speaker is the one on the right  
side when you face the unit.  
Do not allow any objects to fall into or to be placed in  
the bass reflex ducts.  
Do not place anything on top of the unit.  
Do not expose the unit to moisture, to temperatures  
higher than 60°C (140°F) or to extremely low  
temperatures.  
If your system does not work properly, disconnect the  
AC power lead from the wall socket. Plug the AC power  
lead back in, and then turn on your system.  
In case of an electrical storm, unplug the unit for  
safety.  
Hold the AC power plug by the head when removing it  
from the wall socket, as pulling the lead can damage  
internal wires.  
Do not stand or sit on the speakers. You may be  
injured.  
The AC power plug is used as a disconnect device  
and shall always remain readily operable.  
Do not remove the outer cover, as this may result  
in electric shock. Refer internal service to your  
local SHARP service facility.  
E-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System connections (continued)  
Make sure to unplug the AC power lead before making any connections.  
FM aerial  
The spec label (*)  
21W  
10  
The spec label illustration  
may be different from the  
actual label used.  
(*) Label is located at the  
bottom of the unit.  
Wall socket  
(AC 220 - 240 V ~ 50/60 Hz)  
Left speaker  
Right speaker  
Remote control - battery installation  
Note:  
Precautions for battery use:  
Before using remote control, please remove plastic shield  
at battery holder.  
Remove the battery if the unit will not be used for long  
periods of time. This will prevent potential damage due  
to battery leakage.  
1ꢀ While pushing the locking tab towards the centre  
of the remote control, slide out the battery holder.  
Caution:  
Do not use rechargeable battery (nickel-cadmium  
Back of remote  
battery, etc.).  
Plastic  
shield  
control  
Danger of explosion if battery is incorrectly replaced.  
Replace only with the same or equivalent type.  
Batteries (battery pack or battery installed) shall not  
be exposed to excessive heat such as sunshine, fire  
or the like.  
Remote  
control  
Battery holder  
Locking tab  
Installing the battery incorrectly may cause the unit to  
malfunction.  
2ꢀ Remove the old battery from the battery holder,  
insert the new battery and then slide the battery  
holder back into the remote control.  
Notes concerning use:  
Replace the battery if the operating distance is  
reduced or if the operation becomes erratic. Purchase  
“CR 2025”, coin lithium battery.  
Periodically clean the transmitter on the remote control  
and the sensor on the unit with a soft cloth.  
Exposing the sensor on the unit to strong light may  
interfere with operation. Change the lighting or the  
direction of the unit if this occurs.  
Battery holder  
Positive (+)  
side up  
Polarity  
(+) symbol  
Battery type  
Locking tab  
Keep the remote control away from moisture, heat,  
shock, and vibrations.  
E-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General control  
Auto power off function  
The main unit will enter the stand-by mode after 15  
minutes of inactivity during:  
CD/USB: In the stop or pause mode.  
AUDIO IN: No detection of input signal.  
Muting  
The volume is muted temporarily when pressing the MUTE  
button on the remote control. Press again to restore the  
volume.  
Function (on main unit only)  
When the FUNCTION button on main unit is pressed, the  
current function will change to different mode. Press the  
FUNCTION button repeatedly to select desired function.  
Note:  
The backup function will protect the memorised function  
mode for a few hours should there be a power failure or  
the AC power lead becomes disconnected.  
Equalizer  
Press the EQUALIZER button repeatedly until the desired  
sound mode appears.  
No equalisation. (No indicator)  
FLAT  
ROCK  
For rock music. (ROCK indicator lights up.)  
For classical music. (CLASSIC indicator lights up.)  
For pop music. (POPS indicator lights up.)  
To turn the power on  
CLASSIC  
POPS  
Remote  
control  
Function  
Main unit  
Operation  
Vocals are enhanced. (VOCAL indicator lights up.)  
For jazz. (JAZZ indicator lights up.)  
Power on/  
off  
Press to turn the  
power on or to  
go to stand-by  
mode.  
VOCAL  
JAZZ  
Volume auto set-in  
If you turn off and on the main unit with volume set to  
16 or higher, the volume will start at 16.  
If you turn the unit off then on again with the volume  
level set to less than 16, it will turn on again at the  
level set.  
Volume control  
Press the VOLUME +/– button to increase or decrease  
the volume.  
Extra bass control (X-BASS)  
When the X-BASS button is pressed, the unit will enter the  
extra bass mode which emphasises the bass frequencies  
and “X-BASS” indicator will light up. To cancel the extra  
bass mode, press the X-BASS button again.  
E-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to a CD or MP3/WMA disc  
Press here  
Press here  
Disc playback  
Various disc functions  
1ꢀ Press the ON/STAND-BY button to turn the power on.  
Main  
unit  
Remote  
control  
Function  
Play  
Operation  
2ꢀ Press the CD button on the remote control or  
FUNCTION button on the main unit repeatedly to  
select CD function.  
Press in the stop  
mode.  
3ꢀ Open the disc compartment.  
4ꢀ Place the disc on the disc tray, label side up.  
Pause  
Stop  
Press in the  
playback mode.  
Press the  
button to resume  
playback from  
the paused  
point.  
Press in the  
playback mode.  
ꢁꢀ Close the disc compartment.  
Track  
up/  
down  
Press in the  
playback or stop  
mode. If you  
press the button  
in the stop  
Total number of tracks  
on disc.  
mode, press the  
button to  
start the desired  
track.  
6ꢀ Press the  
button to start playback. After the last  
track is played, the unit will stop automatically.  
During playback, press DISPLAY button to display the  
track number. It will appear for about 2 seconds.  
Fast  
forward/  
reverse  
Press and hold  
down in the  
playback mode.  
Release the  
button to resume  
playback.  
Notes for CD or MP3/WMA discs:  
When the end of the track is reached during fast  
forward, the CD operation will be stopped. When  
the beginning of the first track is reached during fast  
reverse, the unit will enter the playback mode.  
E-ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to a CD or MP3/WMA disc (continued)  
Direct track search  
Random play  
By using the Numeric buttons, the desired tracks on the  
current disc can be played.  
The tracks on the disc can be played in random order  
automatically.  
Use the Numeric buttons on the remote control to  
select the desired track.  
To random play all tracks:  
Press and hold down PLAY MODE button on the remote  
control until RDM indicator appears.  
The Numeric buttons allow you to select up to number  
9.  
To cancel random play:  
Press the PLAY MODE button until RDM indicator  
disappears.  
When selecting number 10 or higher, use the “10+”  
button.  
A. For example, to  
choose 13  
1ꢀ Press the “10+”  
button once.  
Notes:  
2ꢀ Press the “1” button.  
3ꢀ Press the “3” button.  
B. For example, to choose 130  
1ꢀ Press the “10+” button twice.  
2ꢀ Press the “1” button.  
3ꢀ Press the “3” button.  
4ꢀ Press the “0” button.  
Notes:  
Selecting the repeat function will cancel the random  
playback.  
Playback will stop after all the tracks is played  
randomly.  
If you press the  
Selected track number  
or  
button during random  
play, you can move to the track selected next by the  
random operation.  
In random play, the unit will select and play tracks  
automatically. (You cannot select the order of the  
tracks.)  
A track number higher than the number of tracks on  
the disc cannot be selected.  
During random play, direct search is not possible.  
Procedure to play back MP3/WMA disc  
with folder mode off  
To stop playback:  
Press the button on main unit or remote control.  
1ꢀ Select the CD function, and load an MP3/WMA disc.  
After disc is loaded, disc info will be displayed.  
2ꢀ Select desired file to be played back by pressing the  
or  
button.  
3ꢀ Press the  
button. Playback will start.  
During playback, press DISPLAY button to display the  
folder, then track number. It will appear for about 2  
seconds.  
Repeat play  
Repeat play can play one track, all tracks or a programmed  
sequence continuously.  
Note:  
If the track is skipped during playback, it means  
“Copyright protected WMA file” or “Not supported  
playback file” is selected.  
To repeat one track:  
Press the PLAY MODE button repeatedly until  
indicator appears. Press the  
button.  
Procedure to play back MP3/WMA disc  
with folder mode on  
To repeat all tracks:  
Press the PLAY MODE button repeatedly until  
indicator appears. Press the  
button.  
To play back CD-R/RW.  
To repeat all desired tracks:  
1ꢀ Select the CD function, and load an MP3/WMA disc.  
Press the FOLDER button and the disc info will be  
displayed. (Folder mode on.)  
Perform steps 1 - 6 in “Programmed play” section on  
page 7 and then press the PLAY MODE button until  
indicator appears.  
To cancel repeat play:  
Press the PLAY MODE button again until  
or  
indicator disappears.  
Total number of folders  
2ꢀ Press the PRESET/FOLDER (or ) button to select  
desired playback folder. Folder number and total tracks in  
the chosen folder will be displayed interchangeably.  
E-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to a CD or MP3/WMA disc (continued)  
Adding tracks to the programme:  
If a programme has been previously stored, the “MEM”  
indicator will be displayed. Follow steps 1 - 4 to add  
tracks. The new tracks will be stored after the last track of  
the previous programme.  
Folder number  
Selected track number  
Programmed play (MP3/WMA with folder  
mode on)  
3ꢀ Select desired file to be played back by pressing the  
or  
button.  
button. Playback will start.  
4ꢀ Press the  
You can choose up to 32 selections for playback in the  
order you like.  
During playback, press DISPLAY button to display the  
Folder, then Track Number. It will appear for about 2  
seconds.  
1ꢀ While in the stop mode, press the FOLDER button.  
(Folder mode on)  
Programmed play (CD or MP3/WMA with  
folder mode off)  
2ꢀ Press the MEMORY button on the remote control to  
enter the programming save mode.  
You can choose up to 32 selections for playback in the  
order you like.  
1ꢀ While in the stop mode, press the MEMORY button  
on the remote control to enter the programming save  
mode.  
3ꢀ Press the PRESET/FOLDER (or ) button to select  
desired playback folder, then press the  
button to select desired track.  
or  
2ꢀ Press the  
or  
button on the remote control to  
select the desired track.  
Selected folder number  
Selected track number  
4
5
Press the MEMORY button to save the track number.  
Selected track number  
3ꢀ Press the MEMORY button to save the track number.  
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can  
be programmed.  
6
7
Press the  
button to start playback.  
During programmed playback, press button to stop  
programmed playback. The total number in memory  
will appear.  
4ꢀ Repeat steps 2 - 3 for other tracks. Up to 32 tracks  
can be programmed. If you make a mistake, press the  
CLEAR button while the “MEM” indicator is flashing.  
Each time the button is pressed, one track will be  
cleared, beginning with last track programmed.  
Notes:  
When a disc is ejected, the programme is automatically  
cancelled.  
If you press the ON/STAND-BY button to enter the  
stand-by mode or change the function from CD to  
another, the programmed selections will be cleared.  
ꢁꢀ Press the  
button to start playback.  
6ꢀ Press the CD button. The total number in memory  
will appear.  
During the programme operation, random play is not  
possible.  
To cancel the programmed play mode:  
While in the stop mode and the “MEM” indicator is lit,  
press the CLEAR button on the remote control. The  
“MEM” indicator will disappear and all the programmed  
contents will be cleared.  
E-ꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to USB mass storage device/MP3 player  
The following functions are the same as CD opera-  
tion:  
Direct search  
Repeat play  
Random play  
Playback  
Programmed play  
Note:  
If the USB memory device is not connected, “no” will be  
shown on the display.  
To remove USB memory device  
1ꢀ Press the button to stop playback.  
2ꢀ Press the button again and wait until display “Un”  
stops blinking.  
3ꢀ Disconnect the USB memory device from the USB  
terminal.  
Notes:  
SHARP will not be held liable for the loss of data while  
the USB memory device is connected to the audio  
system.  
This USB memory’s format supports FAT 16 or FAT  
32.  
SHARP cannot guarantee that all USB memory  
devices will work on this audio system.  
USB cable is not recommended for use in this audio  
system to connect to USB memory device. Use of the  
USB cable will affect the performance of this audio  
system.  
Note:  
This product is not compatible with MTP and AAC file  
systems.  
To play back USB/MP3 player  
1ꢀ Press the USB button on the remote control or  
FUNCTION button on main unit repeatedly to select  
USB function. Connect the USB memory device that  
has MP3/WMA format files on the unit. When the USB  
memory is connected to the main unit, the device  
information will be displayed.  
2ꢀ Select desired file to be played back by pressing the  
or  
button.  
3ꢀ Press the  
button. Playback will start.  
During playback, press DISPLAY button to display  
the folder, then track number. It will appear for  
about 2 seconds.  
Note:  
To pause playback:  
Press the button.  
E-ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to USB mass storage device/  
MP3 player (continued)  
Listening to the radio  
Notes:  
This USB memory cannot be operated via USB hub.  
The USB terminal in this unit is not intended for a PC  
connection but is used for music streaming with a  
USB memory device.  
External HDD-storage cannot be played back via USB  
terminal.  
If the data inside the USB memory is large, it may take  
longer time for the data to be read.  
The USB port is only intended for direct connection to  
a USB memory device without any cable.  
Playback order for MP3 files may differ depending on  
the writing software used during file download.  
Bitrate which is supported by MP3 is 32~320 kbps,  
WMA is 64~160 kbps.  
Playlists are not supported on this unit.  
The display playback time may not be displayed  
correctly when playing back a variable bitrate file.  
Files compressed in MP3 and/or WMA format can be  
played back when connected to the USB terminal.  
Copyright protected WMA files cannot be played  
back.  
This product can play WMA and MP3 files. It will  
automatically detect the file type being played. If  
unplayable file is played on this product, The file will  
be automatically skipped. This will take a few seconds.  
If abnormal indications appear on the display due to  
the unspecified file, turn off the unit and then turn it  
on again.  
This product relates to USB mass storage devices and  
MP3 players. It may however face some irregularities  
due to various unforeseen reasons from some devices.  
Should this happen, turn off the unit and then turn it  
on again.  
Maximum total number of MP3/WMA files is 999.  
Maximum total number of folders is 99 inclusive of  
root directory and folder with non-playable file.  
Tuning  
1ꢀ Press the ON/STAND-BY button to turn the power on.  
2ꢀ Press the TUNER button on the remote control or  
FUNCTION button on the main unit repeatedly to  
select tuner function.  
3ꢀ Press the TUNING ( or ) button to tune in to the  
desired station.  
Manual tuning:  
Press the TUNING ( or ) button repeatedly to  
tune in to the desired station.  
Auto tuning:  
When the TUNING ( or ) button is pressed  
for more than 0.5 seconds, scanning will start  
automatically and the tuner will stop at the first  
receivable broadcast station.  
Notes:  
When radio interference occurs, auto scan tuning may  
stop automatically at that point.  
Auto scan tuning will skip weak signal stations.  
To receive an FM stereo transmission:  
Press the TUNER button to select stereo mode and  
“ST” indicator will be displayed. “  
when an FM broadcast is in stereo.  
” will appear  
If the FM reception is weak, press the TUNER button to  
extinguish the “ST” indicator. The reception changes  
to monaural, and the sound becomes clearer.  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to the radio (continued)  
To preset a station  
To recall a preset station  
Press the PRESET/FOLDER (or ) button to select the  
desired station.  
You can store 40 FM stations in memory and recall them  
at the push of a button. (Preset tuning)  
1ꢀ Perform steps 2 - 3 in “Tuning”.  
To scan the preset stations  
2ꢀ Press the MEMORY button.  
The stations saved in the memory can be scanned auto-  
matically. (Preset memory scan)  
1ꢀ Press and hold the PRESET/FOLDER (or ) button.  
The preset number will flash and the programmed  
stations will be tuned in sequentially, for 5 seconds  
each.  
3ꢀ Within 5 seconds, press the PRESET/FOLDER (or  
) button to select the preset channel number. Store  
the stations in memory, in order, starting with preset  
channel 1.  
2ꢀ Press the PRESET/FOLDER (or ) button again  
when the desired station is located.  
To erase entire preset memory  
4ꢀ Press the MEMORY button to store that station in  
memory. If the “MEM” and preset number indicators  
disappear before the station is memorised, repeat the  
operation from step 2.  
1ꢀ Press and hold the CLEAR button until “CLr”  
appears.  
ꢁꢀ Repeat steps 1 - 4 to set other stations, or to change  
a preset station. When a new station is stored in the  
memory, the station previously memorised for that  
preset channel number will be erased.  
Note:  
During listening to the radio, press DISPLAY button to  
display PRESET number.  
The backup function protects the memorised stations  
for a few hours should there be a power failure or the  
AC power lead become disconnected.  
E-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enhancing your system  
Troubleshooting chart  
The connection lead is not included. Purchase  
commercially available lead as shown below.  
a
Many potential problems can be resolved by the owner  
without calling a service technician. If something is wrong  
with this product, check the following before calling your  
authorized SHARP dealer or service center.  
General  
Symptom  
Possible cause  
When a button is Set the unit to the power  
pressed, the unit  
does not respond.  
stand-by mode and then  
turn it back on.  
If the unit still malfunctions,  
reset it. (Refer page 12)  
Portable audio  
player, etc.  
Audio cable  
(not supplied)  
No  
heard.  
sound  
is Is the volume level set to  
minimum “L-00”?  
Are the speaker wires  
disconnected?  
Listening to the playback sounds of  
portable audio player, etc.  
CD player  
1ꢀ Use a connection lead to connect the portable audio  
player etc. to the AUDIO IN socket.  
Symptom  
Possible cause  
2ꢀ Press the ON/STAND-BY button to turn the power  
Playback does  
not start.  
Playback stops  
in the middle or  
is not performed  
properly.  
Is the disc loaded upside  
down?  
Does the disc satisfy the  
standards?  
Is the disc distorted or  
scratched?  
on.  
3ꢀ Press the AUDIO IN button on the remote control or  
FUNCTION button repeatedly on main unit to select  
AUDIO IN function.  
Playback sounds  
are skipped, or  
stopped in the  
middle of a track.  
Is the unit located near  
excessive vibrations?  
Is the disc very dirty?  
Has condensation formed  
inside the unit?  
4ꢀ Play the connected equipment. If volume level of the  
connected device is too high, sound distortion may  
occur. Should this happen, lower the volume of the  
connected device. If volume level is too low, increase  
the volume of the connected device.  
Remote control  
Symptom  
Possible cause  
Note:  
The  
control does not  
operate.  
remote Is the AC power lead of the  
To prevent noise interference, place the unit away from  
the television.  
unit plugged in?  
Is the battery polarity  
correct?  
Is the battery dead?  
Is the distance or angle  
incorrect?  
Does the remote control  
sensor receive strong light?  
Tuner  
Symptom  
Possible cause  
The radio makes Is the unit placed near the TV  
unusual  
noises  
or computer?  
continuously.  
Is the FM aerial placed  
properly?  
Move the aerial away from  
the AC power lead if it is  
located nearby.  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting chart (continued)  
USB  
Factory reset, clearing all memory  
1ꢀ Press the ON/STAND-BY button to enter the power  
Symptom  
Possible cause  
stand-by mode.  
Device cannot be Is there any MP3/WMA file  
detected.  
2ꢀ While pressing down the VOLUME + button, press  
available?  
Is the device properly  
connected?  
button. “rSt” appears.  
Is it an MTP device?  
Does the device contain  
AAC file only?  
Playback does not  
start.  
Is it a copyright protected  
WMA file?  
Is it a false MP3 file?  
Wrong time display.  
Is Variable Bitrate file  
being played back?  
Caution:  
This operation will erase all data stored in memory  
including tuner preset, and CD program.  
Condensation  
Care of compact discs  
Sudden temperature changes, storage or operation in an  
extremely humid environment may cause condensation  
inside the cabinet (CD pickup, etc.) or on the transmitter  
on the remote control. Condensation can cause the unit  
to malfunction. If this happens, leave the power on with  
no disc in the unit until normal playback is possible (about  
1 hour). Wipe off any condensation on the transmitter with  
a soft cloth before operating the unit.  
Compact discs are fairly resistant to damage, however  
mistracking can occur due to an accumulation of dirt on  
the disc surface. Follow the guidelines below for maximum  
enjoyment from your CD collection and player.  
Do not write on either side of the disc, particularly the  
non-label side from which signals are read. Do not  
mark this surface.  
Keep your discs away from direct sunlight, heat, and  
excessive moisture.  
Before transporting the unit  
Always hold the CDs by the edges. Fingerprints, dirt,  
or water on the CDs can cause noise or mistracking.  
If a CD is dirty or does not play properly, clean it with  
a soft, dry cloth, wiping straight out from the centre,  
along the radius.  
Remove the disc and USB memory device from the unit.  
Then, set the unit to the power stand-by mode. Carrying  
the unit with USB memory device left connected or disc  
left inside can damage the unit.  
NO  
YES  
If problem occurs  
Correct  
When this product is subjected to strong external  
interference (mechanical shock, excessive static  
electricity, abnormal supply voltage due to lightning, etc.)  
or if it is operated incorrectly, it may malfunction.  
If such a problem occurs, do the following:  
1Set the unit to the stand-by mode and turn the power  
Maintenance  
on again.  
Cleaning the cabinet  
2If the unit is not restored in the previous operation,  
unplug and plug in the unit again, and then turn the  
power on.  
Periodically wipe the cabinet with a soft cloth and a  
diluted soap solution, then with a dry cloth.  
Note:  
Caution:  
If neither operation above restores the unit, clear all the  
memory by resetting it.  
Do not use chemicals for cleaning (petrol, paint  
thinner, etc.). It may damage the cabinet.  
Do not apply oil to the inside of the unit. It may cause  
malfunctions.  
E-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
As part of our policy of continuous improvement, SHARP  
reserves the right to make design and specification  
changes for product improvement without prior notice.  
The performance specification figures indicated are  
nominal values of production units. There may be some  
deviations from these values in individual units.  
USB  
USB host  
interface  
Complies with USB 1.1 (Full  
Speed)/2.0 Mass Storage Class.  
Support Bulk only and CBI  
protocol.  
Support file  
MPEG 1 Layer 3  
WMA (Non DRM)  
General  
Bitrate support MP3 (32 ~ 320 kbps)  
Power source  
Power consumption Power on: 10 W  
Power stand-by: 0.4 W (*)  
AC 220 - 240 V ~ 50/60 Hz  
WMA (64 ~ 160 kbps)  
Other  
Maximum total number of MP3/  
WMA files is 999.  
Maximum total number of  
folders is 99 INCLUSIVE of root  
directory.  
Dimensions  
Width: 190 mm (7 - 1/2”)  
Height: 115.7 mm (4 - 9/16”)  
Depth: 235 mm (9 - 1/4”)  
Weight  
1.48 kg (3.26 lbs.)  
File system  
support  
Support USB devices with  
Microsoft  
Windows/DOS/FAT  
(*) This power consumption value is obtained when the  
main unit is in stand-by mode.  
16/FAT 32.  
2 kbyte block length for sector.  
Amplifier  
Tuner  
Output  
power  
MPO: 6 W (3 W + 3 W) (10% T.H.D.)  
RMS: 5 W (2.5 W + 2.5 W) (10% T.H.D.)  
RMS: 4 W (2 W + 2 W) (1% T.H.D.)  
Frequency range  
FM: 87.5 - 108 MHz  
Output  
terminals  
Speakers: 4 ohms  
Speaker  
Type  
1-way type speaker system  
8 cm (3”) Full range  
CD player  
Maximum input  
power  
5 W  
Type  
Single disc multi-play compact  
disc player  
Rated input power 2.5 W  
Signal readout  
Non-contact, 3-beam  
semiconductor laser pickup  
Impedance  
Dimensions  
4 ohms  
D/A converter  
Multi bit D/A converter  
20 - 20,000 Hz  
Width: 111 mm (4 - 3/8”)  
Height: 194 mm (7 - 5/8”)  
Depth: 127.5 mm (5 - 1/64”)  
Frequency  
response  
Dynamic range  
90 dB (1 kHz)  
Weight  
0.86 kg (1.90 lbs.)/each  
E-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Computer Monitor PN L802B User Manual
Silex technology Network Card SX 500 User Manual
Sony Camcorder HXR NX5N User Manual
Sony Clock Radio XDR C705DAB User Manual
Sony Computer Drive CRX230A User Manual
Sony MP3 Player D M805 User Manual
Sony Projector VPL VW600ES User Manual
Sony TV VCR Combo 413 User Manual
Sterling Microscope Magnifier SDD 1 SGM User Manual
SVAT Electronics Digital Camera WSE100 User Manual