Speco Technologies Security Camera HT5100BPVFG User Manual

INSTRUCTION  
MANUAL  
PIR Sensor Camera  
HT5100BPVFG / HT5100BPVFGW  
HT5200BPVFG / HT5200BPVFGW  
Speco Technologies is constantly developing product improvements.  
We reserve the right to modify product design and specifications without notice and without incurring any obligation.  
Rev. 6/20/2012  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Do not install the camera in  
extreme temperature conditions.  
Do not install the camera under  
unstable lighting conditions.  
Do not touch the front lens of the  
camera.  
Only use the camera under conditions  
where temperatures are between  
-10°C and +50°C. Be especially careful to provide  
ventilation when operating under high  
temperatures.  
Severe lighting change or flicker can  
cause the camera to work improperly.  
This is one of the most important parts of the  
camera. Be careful not to leave  
fingerprints on the lens cover.  
Never keep the camera pointed  
directly at strong light.  
Do not drop the camera or subject  
it to physical shocks.  
Do not expose the camera to  
radioactivity.  
It can cause malfunctions to occur.  
Housing damage can compromise  
wheatherproof ratings.  
If exposed to radioactivity the CCD  
will fail.  
NOTE  
* If the camera is exposed to spotlight or object reflecting strong light,  
smear or blooming may occur.  
* please check that the power satisfies the normal specification before  
connecting the camera.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK  
DO NOTREMOVE COVER(OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
ISO14001  
The lightning flash with an arrowhead symbol, within an equilateral  
triangle is intended to alert the user to the presence of uninsulated  
dangerous voltage within the product's enclosure that may be of  
sufficient magnitude to constitute a risk of electric shock to persons.  
The exclamation point within an equilateral triangle is intended to alert  
the user to the presence of important operating and maintenance  
(servicing) instructions in the literature accompanying the appliance.  
INFORMATION - This equipment has been tested and found to comply with  
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.  
These limits are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a commercial environment.  
This equipment generates, uses, and can radiate radio frequency energy and, if  
not installed and used in accordance with the instruction manual, may cause  
harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful  
interference in which case the user will be required to correct the interference at  
their own expense.  
WARNING - Changes or modifications not expressly approved by the  
manufacturer could void the user’s authority to operate the equipment.  
CAUTION : To prevent electric shock and risk of fire hazards:  
Do NOT use power sources other than those specified.  
This installation should be made by a qualified service person and  
should conform to all local codes.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
Precautions for use  
This camera should be installed by qualified personnel only  
There are no user serviceable parts inside  
Do not disassemble this camera other than to make initial adjustments  
Use a UL approved regulated 24 volt AC or 12 volt DC power supply  
Use appropriate low voltage power cable to prevent fire or electrical shock  
Please insure that your installation area can support the weight of the camera  
Please handle this camera carefully :  
Do not use a strong or abrasive detergent when cleaning the camera  
Do not install near cooling or heating device  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Package Contents  
Please make sure that the following items are included in the Package:  
1) HT5100BPVFG, HT5100BPVFGW, HT5200BPVFG, HT5200BPVFGW  
• 1 Video Test Connector, Power Jack  
• 1 Bracket Base  
• 2 Wrenches  
• Set Screw  
- 4 Tapping Screws 4x25  
- 4 Hexagon Socket Screws M5x10  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA INSTALLATION  
jvuulj{Gwv~lyGjhislG  
XUG~oluG|zpunGXYG}vs{zGkjGOŠ–•š›ˆ•›G–“›ˆŽŒG\WWG”hPG  
w–žŒ™Gp•—œ›Gaylk  
jŒ•›Œ™GaGORP  
kjGXY}Gw–žŒ™Gzœ——“  
YUG~oluG|zpunGY[G}vs{zGhjGO[WG}–“›Gh”—šP  
ylkORP  
hjGY[}  
ishjraOTP  
w–žŒ™Gzœ——“  
ZUGjvuulj{G}pklvGjhislG  
T jvuulj{GiujGjhislG{vG{olGiujGqhjrUG  
[UGjvuulj{Gh“ˆ™”G–œ›—œ›GOyŒ“ˆ G–œ›—œ›P  
T j–••ŒŠ›GORGSGjvtPG–™Gw–š›ŒGˆŠ›ˆ›–•Gˆ•‹GOTUGjvtPG–™G  
uŒŽˆ›ŒGˆŠ›ˆ›–•G–GlŸ›Œ™•ˆ“Gh“ˆ™”GkŒŠŒGžŒ•Gt–›–•G  
kŒ›ŒŠ›–•GšG˄vu˅G•G›ŒGŠˆ”Œ™ˆU  
R
jvtG  
w–š›ŒGh“ˆ™”GkŒŠŒG  
uŒŽˆ›ŒGh“ˆ™”GkŒŠŒ  
T
h“ˆ™”Gvœ›—œ›G  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA INSTALLATION  
Compatibility  
HT5100BPVFG, HT5100BPVFGW, HT5200BPVFG, HT5200BPVFGW  
1)  
CVCJBB  
INTJBS  
INTCM  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA INSTALLATION  
1. HT5100BPVFG, HT5100BPVFGW, HT5200BPVFG, HT5200BPVFGW  
CAMERA ASSEMBLY  
BASE ADAPTOR BRACKET  
TAPPING SCREW 4X25, 4EA  
HEXAGON SOCKET SCREW M5X10, 4EA  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
PIR Sensor Weatherproof Bullet Camera  
DC Auto Iris Varifocal Lens(2.8mm-12mm)  
HT5100BPVFG  
HT5100BPVFGW  
600TV Lines  
DC Auto Iris Varifocal  
Lens(2.8mm-12mm)  
True Day / Night Capability  
850nm IR LEDs * 24pcs  
White LEDs * 6pcs  
Automatic Thermostatic Sensor  
Alarm Output  
SPECIFICATIONS  
MODEL  
HT5100BPVFG / HT5100BPVFGW  
1/3” Sony Super HAD CCD ll  
NTSC, PAL  
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)  
2:1 Interlace  
Internal  
600TV Lines  
0.00001Lux / IR LED ON:0.00006Lux  
More than 52dB  
CVBS: 1.0Vp-p / 75Ω  
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)  
Available  
On / Off (Level adjustable)  
BLC / HLC / OFF  
Color / BW / AUTO  
Image Pick-Up Device  
TV System  
Total Pixels  
Effective Pixels  
Scanning Frequency  
Scanning System  
Synchronization  
Resolution  
Minimum Illumination  
S/N Ratio  
Video Output  
Electronic Shutter Speed  
OSD  
SSDR  
BLC  
Day & Night  
Gain Control  
Low / High / Off  
White Balance  
SENS-UP  
ATW / Outdoor / Indoor / Manual / AWC  
Auto / Off (Selectable x2 ~ x512)  
On / Off (8 Programmable Zones)  
On / Off (12 Programmable Zones)  
On / Off (Level adjustable)  
On / Off (x1 ~ x16)  
On / Off  
On / Off (Level adjustable)  
On / Off  
DC 12V / AC24V(Dual Voltage)  
Camera – DC12V 160mA, AC24V 85mA  
IR LED – DC12V 110~300mA, AC24V 60~145mA | White LED – DC12V 30mA, AC24V 15mA  
Glacier Heaters – DC12V 580mA, AC24V 290mA  
Maximum power consumption–DC12V 1070mA, AC24V 535mA(IR LEDs ON, White LEDs ON, Glacier Heaters ON)  
DC Auto Iris Varifocal Lens(2.8mm-12mm)  
Indoor : 131.23 feet / Outdoor : 82.02 feet  
-4ºF~+140ºF RH 95% Max. / -40ºF with Glacier Heaters  
-4ºF~+140ºF RH 95% Max.  
Motion Detection  
Privacy Masking  
DNR3 (Digital Noise Reduction)  
Digital Zoom  
DIS (Digital Image Stabilizadion)  
Sharpness  
Filp / Mirror  
Power Supply  
Power Consumption  
Lens  
IR Distance  
Operational Temp.  
Storage Temp.  
Dimension  
Weight  
3.70"(W) * 4.17"(H) * 9.70"(D)  
3.08 lbs  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
PIR Sensor Weatherproof Bullet Camera  
DC Auto Iris Varifocal Lens (5mm-50mm)  
HT5200BPVFG  
HT5200BPVFGW  
600TV Lines  
DC Auto Iris Varifocal  
Lens(5mm-50mm)  
True Day / Night Capability  
850nm IR LEDs * 24pcs  
White LEDs * 6pcs  
Automatic Thermostatic Sensor  
Alarm Output  
SPECIFICATIONS  
MODEL  
HT5200BPVFG / HT5200BPVFGW  
1/3” Sony Super HAD CCD ll  
NTSC, PAL  
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)  
2:1 Interlace  
Internal  
600TV Lines  
0.00001Lux / IR LED ON:0.00006Lux  
More than 52dB  
CVBS: 1.0Vp-p / 75Ω  
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)  
Available  
On / Off (Level adjustable)  
BLC / HLC / OFF  
Color / BW / AUTO  
Image Pick-Up Device  
TV System  
Total Pixels  
Effective Pixels  
Scanning Frequency  
Scanning System  
Synchronization  
Resolution  
Minimum Illumination  
S/N Ratio  
Video Output  
Electronic Shutter Speed  
OSD  
SSDR  
BLC  
Day & Night  
Gain Control  
Low / High / Off  
White Balance  
SENS-UP  
ATW / Outdoor / Indoor / Manual / AWC  
Auto / Off (Selectable x2 ~ x512)  
On / Off (8 Programmable Zones)  
On / Off (12 Programmable Zones)  
On / Off (Level adjustable)  
On / Off (x1 ~ x16)  
On / Off  
On / Off (Level adjustable)  
On / Off  
DC 12V / AC24V(Dual Voltage)  
Camera – DC12V 160mA, AC24V 85mA  
IR LED – DC12V 110~300mA, AC24V 60~145mA | White LED – DC12V 30mA, AC24V 15mA  
Glacier Heaters – DC12V 580mA, AC24V 290mA  
Maximum power consumption–DC12V 1070mA, AC24V 535mA(IR LEDs ON, White LEDs ON, Glacier Heaters ON)  
DC Auto Iris Varifocal Lens(5mm-50mm)  
Indoor : 164.04 feet / Outdoor : 98.43 feet  
-4ºF~+140ºF RH 95% Max. / -40ºF with Glacier Heaters  
-4ºF~+140ºF RH 95% Max.  
Motion Detection  
Privacy Masking  
DNR3 (Digital Noise Reduction)  
Digital Zoom  
DIS (Digital Image Stabilizadion)  
Sharpness  
Filp / Mirror  
Power Supply  
Power Consumption  
Lens  
IR Distance  
Operational Temp.  
Storage Temp.  
Dimension  
Weight  
3.70"(W) * 4.17"(H) * 9.70"(D)  
3.08 lbs  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA DIMENSION  
HT5100BPVFG, HT5100BPVFGW, HT5200BPVFG, HT5200BPVFGW  
1)  
3.70”  
9.70”  
6.30”  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Features  
Ultra High Sensitivity  
- The built-in high sensitivity COLOR CCD produces a clear image even in 0Lux(B/W, IR-LED ON)or lower  
illumination.  
600TV Lines  
- By adopting a diagonal 6mm(1/3") 410,000 (NTSC) pixel, 470,000(PAL) pixel SONY CCD, the camera  
produces clear picture quality with a horizontal resolution of 600 TV lines for color and a horizontal  
resolution of 700TV lines for BW mode.  
DNR3  
- The high-performance W-V DSP chip effectively removes low-light gain noise and ghosting to provide  
clear images even in dark environments.  
Day & Night  
- This camera has a function that automatically selects the mode that is appropriate for daytime or night-time  
conditions.  
The COLOR mode operates in daytime conditions to provide optimum colors, and BW mode operates in  
night-time conditions to enhance the definition of the image.  
SSDR  
- For images with high contrast between bright and dark Areas from difficult lighting conditions such as  
backlighting, this camera selectively illuminates darker Areas while retaining the same light level for  
brighter Areas to even out the overall brightness.  
Miscellaneous Functions  
- HLC(High Light Compensation), SENS-UP, FLIP(H/V-REV), D-ZOOM, SHARPNESS, MOTION DETECTION and PRIVACY  
functions are provided.  
Disk Saving Effects  
- Up-most and advanced DNR technology camera picture quality has a disk saving effects due to Image sizes  
are smaller than standard CCTV camera image.  
Controlled by OSD Menu  
- The camera can be controlled by selecting the menu text displayed on the monitor screen.  
PIR Sensor  
- Built-In PIR sensor turns the white LED ON when the PIR is triggered by motion.  
Alarm with Motion detection  
Automatic Thermostatic sensor  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Control Button  
1. Type A, Type B, Type C of OSD button could be used when it needs to  
OSD control.  
2. Type D is extra Option (wired Remote controller)  
Up button: Moves the cursor upwards. Use this button to select an item  
or adjust the parameters.  
Down button: Moves the cursor downwards. Use this button to select an  
item or adjust the parameters.  
Left button: Moves the cursor to the left. Use this button to select or  
adjust the parameters of the selected item. The parameter changes  
each time this button is pressed.  
Right button: Moves the cursor to the right. Use this button to select or  
adjust the parameters of the selected item. The parameter changes each  
time this button is pressed.  
Set button: Executes selections and displays a submenu for an item with  
the  
mark.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Setup  
1. Press the Function Setup switch.  
- Main setup menu is displayed on the monitor screen.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSDR  
5.BACKLIGHT  
6.DNR3  
ATW  
OFF  
OFF  
ON  
7.DAY/NIGHT  
8.SPECIAL  
9.EXIT  
AUTO  
SAVE  
2. Select a desired function using the Function Setup switch.  
- Place the cursor over a desired item.  
3. Set up a selected item by using the Function Setup switch.  
4. To finish the setting, select 'EXIT' and press the Function Setup switch.  
NOTE  
■ An item with the  
icon also has sub menus. To select a sub menu, select an item  
with the icon and press the Function Setup switch.  
■ An item with the - - - icon is unavailable due to function settings.  
Lens Setting  
Using this function, you can control the screen brightness.  
1. When the SETUP menu screen is displayed, select 'LENS' by using  
the Function Setup switch so that the arrow indicates 'LENS'.  
2. DC : You can adjust the minimum shutter and maximum value of ESC  
shutter mode.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
ATW  
3. THE Lens mode has sub menu items as listed below.  
- BRIGHTNESS : Adjusts the video brightness.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
-
FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the  
Focus Settings mode under each lens menu. Activate the Focus Settings  
mode, adjust the lens focus, and then deactivate the settings mode.  
NOTE  
■ If color rolling occurs when using a DC lens, set Shutter to Fixed (---).  
Exposure Setting  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
ATW  
1. When the SETUP menu screen is displayed, select 'EXPOSURE' by  
using the Function Setup Switch.  
2. Select a desired mode using the Function Setup switch.  
EXPOSURE SETUP  
1.BRIGHTNESS  
2.SHUTTER  
3.AGC  
4.SENS-UP  
5.RETURN  
25  
- - -  
HIGH  
OFF  
◆ SHUTTER : You can select either auto or manual shutter.  
* --- : Shutter speed is fixed at 1/60sec(1/50sec)  
* ESC : Select this to control the shutter speed automatically. If ESC is  
selected, the shutter speed is automatically controlled depending  
on the ambient illumination of the subject.  
* MANUAL : You can control shutter speed manually.  
(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)  
* A.FLK : Select this when you see picture flicker, this can happen when the  
frequency of the local lighting clashes with the camera.  
NOTE  
■ When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen  
- but the higher the noise.  
* OFF : Deactivates the AGC function.  
* LOW : Allows automatic gain control from 5.3dB to 32dB.  
* HIGH : Allows automatic gain control from 5.3dB to 37dB.  
SENS-UP : When it is night or dark, the camera automatically detects the light  
level and maintains a clear picture if this mode is activated.  
* OFF : Deactivates the SENS-UP function.  
* AUTO : Activates the SENS-UP function.  
RETURN : Select this to save the changes in the EXPOSURE menu and return  
to the SETUP menu.  
NOTE  
■ If you press the Function Setup switch to ‘AUTO’ mode, you can adjust brightness by  
increasing or decreasing the shutter speed. (x2 ~ x512)  
■ Note that the higher the zoom level, the brighter the screen, but the more likely there  
will be a ghosting effect.  
■ It is normal for Noise, Spots and Whitish symptoms to appear in SENS-UP mode when  
the D-ZOOM level is increased.  
White Balance (White Bal) Setting  
Use the White Balance function to adjust the screen color.  
1. When the SETUP menu screen is displayed, select 'White Bal' by using the  
Function Setup switch so that the arrow indicates 'White Bal'.  
2. Select a desired mode using the Function Setup switch.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
ATW  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
※ Select one of the following 5 modes, as appropriate for your purpose.  
ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K.  
OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K.  
(sodium light inclusion)  
INDOOR : Select this when the color temperature is between 4,500˚K and 8,500˚K.  
MANUAL : Select this to fine-tune White Balance manually. Set White Balance first  
by using the ATW or AWC mode. After that switch to MANUAL mode,  
fine-tune the White Balance and then press the Function Setup switch.  
AWC→SET : To find the optimal luminance level for the current environment, point  
the camera towards a sheet of white paper and press the Function  
Setup switch. If the environment changes, readjust it.  
NOTE  
■ White Balance may not work properly under the following conditions. In this case  
select the AWC mode.  
When the color temperature of the environment surrounding the subject is out of the  
control range (e.g. clear sky or sunset).  
When the ambient illumination of the subject is dim.  
If the camera is directed towards a fluorescent light or is installed in a place where  
illumination changes dramatically, the White Balance operation may become unstable.  
SSDR Setting  
SSNR illuminates darker spots of an image while retaining the same light  
level for brighter spots to even out the overall brightness of images with  
high contrast between bright and dark spots.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSDR  
ATW  
OFF  
1. When the SETUP menu screen is displayed, select 'SSNR' by using  
the switch so that the arrow indicates 'SSDR'.  
2. Use the switch to change the SSDR level according to the contrast  
between bright and dark areas.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Backlight Setting  
Unlike conventional cameras, the HT5100BPVFG and HT5200BPVFG are designed  
to deliver a distinctive subject and background at the same time, even when the  
subject is backlight, by using the features of the proprietary W-V DSP chip.  
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the  
Function Setup switch so that the arrow indicates 'BACKLIGHT'.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSDR  
5.BACKLIGHT  
6.DNR3  
ATW  
OFF  
OFF  
ON  
7.DAY/NIGHT  
8.SPECIAL  
9.EXIT  
AUTO  
SAVE  
2. Select a desired mode using the Function Setup switch.  
BLC : Enables a user to directly select a desired area from a picture, and to view  
the area more clearly.  
HLC (High Light Compensation) : If the scene contains extremely bright light areas  
such as; from car headlights, the light can mask out much of the on-screen detail  
LEVEL : Adjust level of the HLC function.  
-
-
-
LIMIT : Enable to change the operating condition.  
MASK COLOR/TONE : Change the color / transparency of the masking area.  
(Black, Red, Blue, Cyan, Magenta)  
-
TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced  
OFF : Not being used  
3. Select a desired mode using the Function Setup switch and press the Function Setup switch.  
Select 'BLC' to adjust the area to Select 'BLC' to adjust the area to  
be enhanced then adjust the level. be enhanced then adjust the level.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLC SETUP  
HLC SETUP  
LEVEL  
TOP  
BOTTOM  
LEFT  
LOW  
38  
109  
54  
LEVEL  
LIMITS  
MIDDLE  
NIGHT ONLY  
BLACK  
MASK COLOR  
MASK TONE  
TOP  
BOTTOM  
LEFT  
1
RIGHT  
121  
5
120  
5
Press Set to Return  
RIGHT  
172  
Press Set to Return  
NOTE  
Because there can be a difference in the effectiveness of HLC according to the amount  
of light area in the screen, optimize the installation angle for the best HLC performance.  
When dark, the HLC is only activated when a bright light exceeding a specific size in  
NIGHT ONLY mode.  
The HLC is not activated in day light or when bright light is not present at night in NIGHT  
ONLY mode.  
BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.  
DNR3 Setting  
This function reduces the background noise in a low luminance environment.  
1. When the SETUP menu screen is displayed, select 'DNR3' by using the  
Function Setup switch so that the arrow indicates 'DNR3'.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSDR  
5.BACKLIGHT  
6.DNR3  
ATW  
OFF  
OFF  
ON  
7.DAY/NIGHT  
8.SPECIAL  
9.EXIT  
AUTO  
SAVE  
2. Select a desired mode using the Function Setup switch.  
OFF : Deactivates DNR3. Noise is not reduced.  
ON : Activates DNR3 so that noise is reduced.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Set the DNR3 mode to 'ON' and press the Function Setup switch. Then you  
can adjust the noise reduction level.  
NOTE  
You cannot set the DNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’.  
When adjusting the noise reduction level in the DNR3 mode, remember that the higher the  
level set, the more the noise level will be reduced, as will the brightness of the image.  
Day/Night Setting  
You can display pictures in color or black and white.  
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT'by using the  
Function Setup switch so that the arrow indicates 'DAY/NIGHT'.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSDR  
5.BACKLIGHT  
6.DNR3  
ATW  
OFF  
OFF  
ON  
7.DAY/NIGHT  
8.SPECIAL  
9.EXIT  
AUTO  
SAVE  
2. Select a desired mode using the Function Setup Switch according to the  
picture display you want.  
COLOR : The picture is always displayed in color.  
B/W : The picture is always displayed in black and white.  
- BURST MODE : You can turn on or off the burst  
signal on B/W mode.  
- IR MODE : When IR LED is turned on in B/W, the  
objects can be clearly identified due to  
the function that decreases screen saturation  
of objects within a short distance.  
- TOP/BOTTOM/LEFT/RIGHT : Adjust the range according to  
the location of objects.  
B/W MODE SETUP  
1.BURST MODE  
ON  
2.IR MODE  
3.IR LEVEL  
4.RETURN  
ON  
HIGH  
- IR LEVEL : Select LOW when objects appears within a  
short distance or select HIGH when objects  
appears within a long distance on the screen.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTO : The mode is switched to 'Color' in a normal environment, but switches to  
'B/W' mode when ambient illumination is low. To set up the switching time for AUTO  
mode, press the Function Setup switch. You can turn on or off the burst signal on B/W  
mode.  
AUTO SETUP  
- BURST MODE : You can turn on or off the burst signal  
1.BURST MODE  
2.COLOR→B/W  
DURATION  
DWELL TIME  
3.B/W→COLOR  
DURATION  
ON  
on B/W mode.  
FAST  
3SEC  
- DURATION : You can select brightness of illumination  
about changing the day/night mode.  
- DWELLTIME : You can select the duration time about  
changing the day/night mode.  
FAST  
10SEC  
DWELL TIME  
4.RETURN  
→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40, 60s  
COLOR→B/W B/W→COLOR  
FAST  
SLOW  
2.5 lux  
1 lux  
5 lux  
10 lux  
* The day/night switching point of the  
camera can be adjusted.  
NOTE  
When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as like selecting 'COLOR'  
mode and 'AUTO' mode can not be selected.  
Special Setting  
1. When the SETUP menu screen is displayed, select 'SPECIAL' by using the  
Function Setup switch so that the arrow indicates 'SPECIAL'.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSDR  
5.BACKLIGHT  
6.DNR3  
ATW  
OFF  
OFF  
ON  
7.DAY/NIGHT  
8.SPECIAL  
9.EXIT  
AUTO  
SAVE  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Select a desired mode using the Function Setup switch.  
SPECIAL  
1.IMAGE ADJ  
2.CAM TITLE  
3.SYNC  
OFF  
INT  
4.MOTION DET  
5.PRIVACY  
6.DIS  
OFF  
OFF  
OFF  
7.COMM ADJ  
8.LANGUAGE  
9.RETURN  
ENGLISH  
IMAGE ADJ. :  
1) When the SETUP menu screen is displayed, select 'IMAGE ADJ' by  
using the Function Setup switch so that the arrow indicates 'IMAGE ADJ'.  
2) Select a desired mode using the Function Setup switch.  
IMAGE SETUP  
1.V-REV  
2.H-REV  
3.D-ZOOM  
OFF  
OFF  
4.FONT COLOR  
5.SHARPNESS  
6.MONITOR  
7.RETURN  
WHITE  
ON  
LCD  
* V-REV : You can flip the picture vertically on the screen.  
* H-REV : You can flip the picture horizontally on the screen.  
* D-ZOOM : You can use a digital zoom of x1 ~ x16.  
*
FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)  
* SHARPNESS : As you increase this value, the picture outline becomes stronger and clearer.  
Adjust this value appropriately depending on the sharpness of the picture.  
* MONITOR : Please change the settings value of video appropriate to your monitor.  
- LCD : Please select this menu item when using a LCD monitor.  
- CRT : Please select this menu item when using a CRT monitor.  
- USER : Please use this menu item when using a monitor other than standard ones. You can  
change the gamma, PED level, and color gain in the sub menus.  
* RETURN : Select this to save the settings for the IMAGE ADJ menu and to return to the SETUP menu.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
When the V-REV or H-REV mode is enabled, the text on the screen does not flip.  
If you increase the SHARPNESS level too high, the picture may become distorted or noise  
may appear.  
CAM TITLE : If you enter a title, the title will appear on the monitor.  
1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the  
arrow indicates 'CAM TITLE'.  
CAMERA TITLE SETUP  
2) Set it to 'ON' by using the Function Setup switch.  
A B C D E F G H I J K L M  
3) Press the Function Setup switch.  
N O P Q R S T U V W X Y Z  
a b c d e f g h i j k l m  
n o p q r s t u v w x y z  
- . 0 1 2 3 4 5 6 7 8 9  
4) Use the Function Setup switch to move to a  
desired letter and select the letter by pressing  
the Function Setup switch. Repeat this to enter  
multiple letters. You can enter up to 15 letters.  
5) Enter a title, move the cursor to 'POS' and  
press the Function Setup switch. The entered  
title appears on the screen. Select the position  
to display the title on the screen by using the  
Function Setup switch and press the Function  
Setup switch. When the position is determined,  
select 'END' and press the Function Setup switch  
to return to the SPECIAL menu.  
←→CLR  
POS  
END  
SHOP  
NOTE  
When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if  
you enter one.  
Only English is available in this mode.  
If you move the cursor to CLR and press the Function Setup switch, all the letters are  
deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function  
Setup switch. Move the cursor over the letter to be edited, move the cursor to the letter to be  
inserted and then press the Function Setup switch.  
SYNC : In areas where the supply is at 60Hz(NTSC), 50Hz(PAL), you can synchronize  
the output phase of multiple cameras using the power synchronization function  
(Line-Lock) without using a synchronization signal generator.  
- INT : Internal Synchronization Type  
- L/L : Power Synchronization Type, Line-lock  
* Press the Function Setup switch.  
* You can select a desired phase from 0 to 359 when select 'phase'.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L type  
synchronization.  
When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.  
MOTION DET :This product has a feature  
MOTION DET  
1.SENSITIVITY  
2.AREA MODE  
3.SEL POS  
4.XPOS  
5.YPOS  
6.FILL → SET  
7.RETRUN  
that allows you to observe movement of  
objects in 8 different areas on the screen,  
and the words 'MOTION DETECTED' appear  
on the screen when movement is detected.  
Activity can be monitor more efficiently.  
1) When the SPECIAL menu screen is displayed,  
press the Function Setup switch so that the arrow  
indicates‘MOTION DET’.  
AREA1  
ON  
L-TOP  
3
5
2) Set up the mode using the Function Setup switch.  
- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high, motion  
detection sensitivity is increased to recognize even small movement.  
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.  
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.  
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.  
- YPOS : Determines the coordinate of the vertical axis for SEL POS.  
- FILL→SET : Fills in a selected MD area. The color of the area can be selected from brown,  
orange, blue, cyan, green, yellow, magenta and red.  
-
RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.  
PRIVACY : Mask an area you want to hide on the screen.  
PRIVACY AREA SETUP  
1.AREA  
2.MODE  
3.MASK COLOR  
4.MASK TONE  
5.TOP  
AREA1  
OFF  
GREEN  
1
39  
6.BOTTOM  
7.LEFT  
79  
13  
8.RIGHT  
52  
9.RETURN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1) When the SPECIAL menu screen is displayed, press the Function  
Setup switch so that the arrow indicates 'PRIVACY'.  
2) Set up the mode using the Function Setup switch.  
- AREA : You can select up to 12 PRIVACY areas.  
- MODE : Determines whether to use the area selected in the AREA.  
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray.  
- MASK TONE : Adjust the brightness of MASK COLOR.  
- TOP/BOTTOM/LEFT/RIGHT :Adjust the size and position of the selected area.  
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.  
DIS (Digital Image Stabilizer) :  
This function mitigates any picture movement due to external factors such as wind.  
NOTE  
As the DIS function uses the digital zoom the camera's resolution will decrease.  
DIS doesn’t operate when background illumination is too low.  
DIS doesn’t operate when object pattern is monotonic as like sky or white wall.  
PIR Sensor & Alarm with Motion Detection  
Built-In PIR sensor turns the white LED ON when the PIR is triggered by motion.  
OFF  
ON  
○ White LED  
switch 1 on → 10sec  
switch 2 on → 20sec  
switch 3 on → 30sec  
switch 4 N/C  
○ Alarm CAMERA Motion  
switch 1 on → 10sec  
switch 2 on → 20sec  
switch 3 on → 30sec  
switch 4 N/C  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Automatic Thermostatic Sensor!  
1. Power off under -40 degree, the camera becomes frozen  
2. On power on, the first temperature sensor starts working and makes heater work.  
3. When the internal temperature in camera goes up to -10 degree,  
the second temperature sensor starts working and Camera on.  
In this status the first and second temperature sensor work together.  
4. When the internal temperature in camera goes up to +10 degree,  
the first temperature sensor turns off and the only second temperature  
sensor keeps working.  
Exit Setting  
Select a desired EXIT mode using the Function Setup Switch.  
- SAVE : Save the current settings and exit the MAIN SETUP menu.  
- NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.  
- RESET : Resets the camera settings to the factory defaults. Language,  
Communication and Monitor Settings are not initialized.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble Shooting  
PROBLEM  
POSSIBLE CAUSE  
Check the power cable, power supply output and video  
Northing appears on  
connection between the camera and monitor.  
the screen.  
Are the camera lens or the lens glass dirty?  
Clean the lens / glass with a soft clean cloth.  
Adjust the monitor controls, as required.  
If the camera is facing a very strong light, change  
the camera position.  
The image on the  
screen is dim.  
Adjust the lens focus.  
Adjust the contrast control of the monitor.  
The image on the  
screen is dark.  
If there is an intermediate device, correctly set the 75Ω/Hi-z.  
The camera is not  
working properly  
and the surface of  
the camera is hot.  
Check the camera is correctly connected to an appropriate  
regulated power source.  
Has MOTION DET been set to ON in the menu?  
Motion Detection  
is not activated.  
Has MD AREA been properly defined?  
The color of the  
Check the settings in WHITE BALANCE menu.  
picture is not correct.  
The image on the  
Make sure that the camera isn’t facing direct sunlight or  
screen flickers.  
fluorescent lighting. If necessary,change the camera position.  
Check that the AGC setting in the EXPOSURE menu is’t set to OFF.  
Check the EXPOSURE menu and make sure SHUTTER is set to------.  
The SENS-UP does  
not work.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
200 New Highway  
Amityville, NY 11701  
631-957-8700  
1 800 645 5516  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Flat Panel Television LC 46D85UN User Manual
Shindaiwa Trimmer 82053 User Manual
Sony Camcorder CCD TR2200E User Manual
Sony Modem MP595 User Manual
Sony Projection Television KDF 46E3000 User Manual
Star Micronics Printer SP200 Series User Manual
State Industries Water Heater SRT80 120NE User Manual
Sub Zero Freezer Sub Zero User Manual
Sylvania Clock Radio SIP198 User Manual
Tannoy Portable Speaker CVS6 User Manual