Sony Video Game Console PS2 User Manual

EN  
CT  
User's Guide  
SCPH-90006  
SCPH-90007  
Before using this product, carefully read this manual and the Quick Reference manual included in the package with the console, and retain them for  
future reference.  
06/07-UG1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Vertical position  
Preparation  
When setting the console in the vertical  
position, use the SCPH-90110 vertical stand  
(for PlayStation®2) (sold separately).  
Getting started  
Removing the 3-pin converting adaptor (SCPH-  
90006 only)  
EN  
Hint  
Some vertical stands (for PlayStation®2) cannot be used with this model of the  
PlayStation®2 console. For details, see the Quick Reference (  
the SCPH-90110 when purchasing a vertical stand.  
Electrical outlet configuration may vary depending on the region of use. If  
the plug on the supplied AC power cord does not match the electrical  
outlet, loosen the screw and remove the converting adaptor.  
page 2). Choose  
Mains power plug  
Caution  
3-pin converting adaptor  
Do not place the console in locations where it may be exposed to the following  
conditions:  
• Places subject to excessive cigarette smoke or dust. Cigarette smoke residue  
or dust build-up on the internal components, such as the lens, may cause the  
console to malfunction.  
• Places subject to extreme temperatures, in direct sunlight, near a heat source,  
or in a car with its windows closed (particularly in summer). These conditions  
may warp the exterior of the console or cause the console to malfunction.  
• Places close to magnetic fields, such as those produced by magnets or  
loudspeakers.  
Positioning the console  
You can place the console in either the horizontal or vertical position.  
Horizontal position  
Set the console horizontally.  
MEMORY CARD  
MEMORY CARD  
• Places subject to vibration.  
Getting started  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
PlayStation®2 console rear  
Part names  
Rear vent  
PlayStation®2 console front  
Disc cover  
]/1 (on/standby) indicator  
A (open) button  
~AC IN connector  
NETWORK connector  
]/1 (on/standby)/RESET button  
MEMORY CARD slot 2  
MEMORY CARD slot 1  
DIGITAL OUT (OPTICAL)  
connector  
AV MULTI OUT connector  
"
" product family logo*  
Hint  
For part names of the analog controller (DUALSHOCK®2), see "Using the analog  
controller (DUALSHOCK®2)" ( page 12).  
MEMORY CARD  
MEMORY CARD  
Controller port 1  
Controller port 2  
IR receiver  
USB connector  
* The "  
" product family logo can be rotated to match the horizontal or vertical  
positioning of the console.  
Hint  
You can connect USB devices that are compatible with the PlayStation®2 console.  
Note, however, that not all USB-compatible products work with the PlayStation®2  
console. Refer to the instructions supplied with the device to be connected for more  
information.  
Part names  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Caution  
Connecting to a TV  
If you display a still image on a plasma or projection* TV screen for an extended  
period of time, "ghosting" may occur. This is a characteristic of these types of  
TVs. Static, non-moving images, such as console setting menus, DVD menus or  
paused images, may leave a faint image permanently on the TV screen if left on  
for an extended time. Refer to the instructions supplied with your TV for details.  
* Except those of LCD screen types  
Before connecting  
• Do not plug the AC power cord for the console into an electrical outlet  
until you have made all other connections.  
EN  
Hint  
• Check that the TV is turned off.  
The console can be connected to a VCR or an integrated TV/VCR. Note, however,  
that if you play a DVD with copy-protection encryption, picture quality may be  
reduced.  
Connecting to a TV using the supplied AV cable  
Connect the console to the TV as shown below.  
Console rear  
Audio and video inputs of the TV  
VIDEO  
L-AUDIO-R  
Yellow White  
Red  
To the AV MULTI  
OUT connector  
Do not use when  
connecting to a  
monaural TV.  
AV cable  
Connecting to a TV  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
When using cables sold separately  
Connecting digital audio  
equipment  
Picture quality differs depending on the type of cable used. Use the  
information below to determine the best connection method.  
If you use a cable sold separately, refer to the instructions supplied with the  
cable.  
By using a commercially available optical digital cable, you can enjoy  
surround sound with the effect of being in a movie theater or a concert hall.  
When connecting the console to audio equipment with digital connectors,  
refer to the instructions supplied with the device to be connected.  
TV  
Cable type  
A TV with S VIDEO inputs  
S VIDEO cable (SCPH-10480)  
Component AV cable (SCPH-10490)  
Console rear  
A TV with component video  
input connectors  
Connected device  
DIGITAL IN  
Picture quality scale  
High quality  
OPTICAL  
x AV cable (supplied)  
x S VIDEO cable  
x Component AV cable  
This scale is intended only as a reference. Depending on the product or  
condition of your TV, the picture quality may be different.  
Commercially available optical  
digital cable  
Hints  
• To use progressive scan, you must have a TV that supports progressive scan (480p)  
and you must connect using the appropriate type of cable*. You must also check  
that the console settings are correct. For details, see "Progressive" in "Setting TV  
Hints  
display options" (  
• If you connect the console to audio equipment using an optical digital cable, it may  
affect the audio output of some PlayStation®2 format software with the result that  
no sound is produced. If this happens, use a cable such as the supplied AV cable  
and connect it to the console's AV MULTI OUT connector. Do not use an optical  
digital cable.  
* The component AV cable (sold separately) is compatible with progressive scan.  
• You cannot connect the console to a TV with component video inputs that are  
exclusively for HDTV use (Y PB PR). Refer to the instructions supplied with your  
TV for details.  
• After connecting digital audio equipment, set "Digital Out (Optical)" to "On" in the  
System Configuration menu. For details, see "Digital Out (Optical)" (  
Connecting digital audio equipment  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting the controller  
Connecting the AC power cord  
1 Insert the analog controller (DUALSHOCK®2) into a controller  
port of the console.  
Warnings  
• The socket-outlet shall be installed near the equipment and shall be easily  
accessible.  
Console front  
EN  
MEMORY CARD  
• Do not plug the AC power cord for the console into an electrical outlet until you  
have made all other connections.  
MEMORY CARD  
MEMORY CARD  
1 Connect the AC power cord to the ~ AC IN connector on the  
console rear.  
Console rear  
~AC IN connector  
Analog controller  
(DUALSHOCK®2)  
AC power cord  
Hint  
Some software titles designate a specific controller port to be used. Refer to the  
instructions supplied with the software for details.  
Connecting the controller  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2 Plug the AC power cord into the electrical outlet.  
Turning the console on and off  
Console rear  
Before turning on the console  
Do not turn on the console until you have finished these steps. Refer to the  
instructions supplied with your TV for details.  
• Turn on the TV.  
AC power cord  
To the electrical outlet  
• Change your TV setting to display output from the line to which the  
console is connected.  
Some regions may use a  
different electrical outlet plug  
from the one illustrated.  
The =/1 (on/standby) indicator on the console front will light up in red  
to indicate that the console is in standby mode.  
Turning on the console  
1 Check that the =/1 (on/standby) indicator on the console  
]/1 indicator  
front is lit up in red.  
Console front  
2 Press the =/1 (on/standby)/RESET button on the console  
front.  
MEMORY CARD  
MEMORY CARD  
The =/1 indicator on the console front will turn green and output from  
the console will be displayed on the TV.  
=/1/RESET button  
Console front  
=/1 indicator  
MEMORY CARD  
MEMORY CARD  
Turning the console on and off  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Hints  
• The first time you turn on the console after purchase, screens for setting  
"Language", "Time Zone" and "Daylight Savings Time (Summer Time)" will be  
displayed. Follow the on-screen instructions to complete the settings.  
• If you connect the console to a wide screen TV, set "Screen Size" in the System  
Configuration menu (  
EN  
Turning off the console  
1 Press and hold the =/1/RESET button on the console front for  
more than a second.  
The =/1 indicator will turn red to indicate that the console has entered  
standby mode.  
=/1/RESET button  
Console front  
=/1 indicator  
MEMORY CARD  
MEMORY CARD  
Warning  
The power is not completely turned off when the console is in standby mode. If  
you do not plan to use the console for an extended period of time, unplug the  
AC power cord from the electrical outlet.  
Turning the console on and off  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Games  
Playing a game  
Place the disc in the console with the label side  
facing up.  
Disc cover  
Place the disc so that all three tabs  
are above the disc's surface.  
MEMORY CARD  
MEMORY CARD  
A (open) button  
=/1/RESET button  
Before playing a game  
Starting a game  
Check that the connections to the TV and audio equipment are correct and  
that the precautions have been met.  
• "Connecting to a TV" ( page 5)  
1 Turn on the console ( page 8).  
The main menu is displayed ( page 30).  
• "Connecting the controller" ( page 7)  
2 Press the A (open) button on the console front.  
• "Connecting the AC power cord" ( page 7)  
The disc cover opens.  
Hint  
3 Place the disc in the console.  
To play online games, you first need to connect to and set up a network. See  
"Connecting to a network" (  
Set the disc in the disc holder with the label side facing up.  
page 37) for details.  
Playing a game  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4 Close the disc cover.  
2 Remove the disc.  
After the disc cover is closed, the game will start.  
Hold down the black center part of the disc holder, and then lift the  
disc by the edges.  
MEMORY CARD  
MEMORY CARD  
EN  
MEMORY CARD  
MEMORY CARD  
Hints  
• You can also start a game from the Browser screen (  
Press the black center part of  
the disc holder.  
page 30).  
• If you turn on the console after inserting a disc, the game will start automatically.  
3 Close the disc cover.  
To reset a game  
Press the \/1 (on/standby)/RESET button on the console front. Do not  
accidentally press the @/1/RESET button while playing a game, as doing  
so will cause the game to reset.  
4 Press the =/1/RESET button.  
The main menu is displayed ( page 30).  
Changing game discs  
1 Open the disc cover and remove the disc.  
Ending a game  
When removing a disc, hold down the black center part of the disc  
holder and then lift the disc by the edges.  
Caution  
When removing a disc, check that the disc has stopped completely. Do not touch  
the disc if it is spinning, as doing so may cause injury, damage to the disc or  
console malfunction.  
2 Insert a new disc.  
3 Close the disc cover and reset the console.  
The new game will start.  
1 Press the A button on the console front.  
Hint  
You do not need to turn off the console when changing games.  
Playing a game  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About mode switching  
Using the analog controller (DUALSHOCK®2)  
The ANALOG mode button can be used to switch between two modes.  
Switch to the appropriate mode for use. Note, however, that some software  
titles make this adjustment automatically.  
The analog controller (DUALSHOCK®2) is equipped with a pressure-  
sensitive button function. It also has a vibration function.  
Digital mode  
(indicator: off)  
Analog mode  
(indicator: red)  
Part names  
SELECT button  
L2 button  
START button  
R2 button  
Hints  
L1 button  
R1 button  
button  
• When using the analog controller in digital mode, the left and right analog sticks  
do not function. Also, the pressure-sensitive button function is turned off.  
• Depending on the software, you may not be able to switch modes even if you press  
the ANALOG mode button.  
Directional  
buttons  
button  
button  
button  
About analog controls  
• When playing a PlayStation®2 format software title, you can use all  
buttons in analog mode except for the START, SELECT, L3 and R3  
buttons.  
Right analog stick/ R3 button*  
Mode indicator  
Left analog stick/ L3 button*  
• When playing a PlayStation® format software title, only the left and right  
analog sticks can be used in analog mode.  
ANALOG mode button  
* The left and right analog sticks, or the L3 and R3 buttons, function only in analog  
mode (indicator: red).  
Hint  
Depending on the software, the buttons for use in analog mode may be limited. Refer  
to the instructions supplied with the software for details.  
* The L3 and R3 buttons function when the analog sticks are pressed.  
Hint  
About the vibration function  
Before using the analog controller  
The vibration function can be set to ON or OFF in the software options  
menu.  
(DUALSHOCK®2), with the console turned on,  
rotate the left and right analog sticks once with your  
thumbs before starting a game. Do not twist the  
analog sticks, but rotate as if drawing a circle as  
shown in the diagram.  
Hint  
Depending on the software, the vibration function may be set to "On" automatically.  
Playing a game  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
About using the analog controller (DUALSHOCK®)  
(SCPH-110)  
Using memory cards  
You can use the analog controller (DUALSHOCK®) (SCPH-110) with the  
PlayStation®2 console, but the functions of the buttons in analog mode  
may be different from those of the analog controller (DUALSHOCK®2).  
Only the left and right analog sticks can be used in analog mode.  
You can save and load game data using a memory card. You can also  
delete game data or copy game data from one memory card to another.  
EN  
About memory card types  
There are two types of memory cards. Select a memory card suitable for  
the software in use.  
Memory card type  
Compatible software  
Amount of memory  
Memory card (8MB)  
(for PlayStation®2)  
(SCPH-10020 G)  
PlayStation®2 format  
software  
Approx. 8 MB  
Memory card  
PlayStation® format  
software  
15 memory blocks  
(approx. 120 KB)  
(SCPH-1020)*  
* This product is no  
longer manufactured.  
MagicGate™ is a term of copyright protection technology developed by  
Sony Corporation.  
Using memory cards  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3 Select "Copy" or "Delete", and then press the  
button.  
Inserting a memory card  
When copying game data, check that two memory cards are inserted  
in the console. If you have selected "Delete", skip to step 5.  
Insert the memory card into a MEMORY CARD slot on the console front.  
Console front  
4 Select the destination, and then press the  
5 Select "Yes", and then press the button.  
button.  
MEMORY CARD  
MEMORY CARD  
MEMORY CARD  
While copying or deleting data, do not remove the memory cards.  
6 When copying or deleting is completed, press the  
button.  
Hint  
Hints  
Some software titles designate a specific MEMORY CARD slot to use. Refer to the  
instructions supplied with the software for details.  
• To view information about a game data item, select the icon for the data and then  
press the  
button to check the details.  
• Compatibility between software and memory cards:  
– You cannot save or copy PlayStation®2 format software to a memory card  
(SCPH-1020).  
Saving or loading game data  
– You cannot save PlayStation® format game data to a memory card (8MB) (for  
PlayStation®2). You can, however, copy PlayStation® format game data from a  
memory card (SCPH-1020) to a memory card (8MB) (for PlayStation®2) for  
storage purposes. Note that such game data cannot be loaded directly from a  
memory card (8MB) (for PlayStation®2).  
Depending on the software, the procedure for saving or loading may vary.  
Refer to the instructions supplied with the software for details.  
Copying or deleting game data  
1 At the Browser screen ( page 30), use the directional  
buttons to select the icon for the memory card you want to  
use for copying or deleting data and then press the  
button.  
2 Select the icon for the data you want to copy or delete, and  
then press the  
button.  
Using memory cards  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Audio CDs  
Operating the CD player during playback  
Playing an audio CD  
Using the directional buttons, select the icon for the desired track and then  
press the  
button.  
Icon (button*)  
Function  
Playing a CD  
. (L1 button)  
Go to the beginning of the current or previous track  
Fast reverse  
EN  
1 Turn on the console and insert the disc ( page 10).  
m
M
(L2 button)  
(R2 button)  
Follow steps 1 to 4 of "Starting a game".  
Fast forward  
The track numbers are displayed.  
> (R1 button)  
Go to the beginning of the next track  
2 Using the directional buttons, select the track number you  
N
X
(START button) Start playback  
(START button) Pause playback  
(SELECT button) Stop playback  
want to play and then press the  
button.  
Playback begins.  
x
Hints  
* You can operate directly by pressing the buttons of the analog controller  
(DUALSHOCK®2).  
• If you turn on the console after inserting a disc, the track numbers are displayed  
automatically.  
• You can also start playback from the Browser screen (  
page 30).  
Hint  
You can also use the DVD remote control (for PlayStation®2) (sold separately).  
Caution  
To play an audio CD recorded in DTS format, you must connect a device with  
a DTS decoder to the DIGITAL OUT (OPTICAL) connector ( page 6). Note  
that an extremely loud noise may be emitted if the device does not have a DTS  
decoder or if it is connected to the AV MULTI OUT connector.  
Playing an audio CD  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
3 Select the desired setting, and then press the  
button.  
Ending audio CD playback  
If you select "Program", the screen for specifying track order will be  
displayed. Select the tracks you want to play.  
1 Using the directional buttons, select x and then press the  
button.  
4 Press the  
button.  
Playback stops. Press the A (open) button on the console front to  
remove the disc.  
The Browser screen is displayed.  
5 Select the audio CD icon, and then press the  
button.  
The track numbers are displayed, and the setting option is shown in the  
Playing in various modes  
lower left of the screen.  
You can set for "Play Mode" and "Repeat".  
6 Select the desired track, and then press the  
button.  
Play Mode  
Normal  
Program  
Shuffle  
Off  
Plays tracks as recorded on the CD  
Plays tracks in a specified order  
Plays tracks in a random order  
Does not play the CD repeatedly  
Plays all tracks repeatedly  
Playback begins.  
Hints  
• You can also access the Play Options screen from the screen displaying the tracks  
by selecting the Audio CD icon in the upper left corner of the screen and pressing  
Repeat  
the  
button.  
All  
• You can set "Play Mode" and "Repeat" at the same time.  
1
Plays a track repeatedly  
1 At the Browser screen ( page 30), use the directional  
buttons to select the audio CD icon and then press the  
button.  
The Play Options screen is displayed.  
2 Select "Play Mode" or "Repeat", and then press the  
button.  
Playing an audio CD  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVDs  
Using the Control Panel  
Watching a DVD  
1 Start playback of the DVD ( page 19).  
2 Press the SELECT button.  
You can operate the DVD player using the following methods.  
• Using the on-screen Control Panel  
• Operating directly using the analog controller (DUALSHOCK®2)  
• Using the DVD remote control (for PlayStation®2) (sold separately)  
The Control Panel is displayed. If you press the SELECT button again,  
the display will change its position on the screen.  
EN  
The following instructions assume use of the Control Panel to operate the  
DVD player. Some operations may be different depending on the method  
used.  
Hints  
• For details about playing a DVD, refer to the instructions supplied with the DVD.  
• The PlayStation®2 console plays disc content as recorded in the DVD software.  
Note that not all features are available on all DVDs.  
3 Using the directional buttons, select an icon and then press  
the  
button.  
Hint  
To turn off the Control Panel, press the SELECT button (once or twice), or press the  
button.  
Control Panel item list  
You can access the following options in the Control Panel.  
Icon  
Function  
Menu  
Displays the DVD-Video menu  
Top Menu  
Displays the DVD-Video menu  
Watching a DVD  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Icon  
Function  
Icon  
Function  
Returns to the previously selected screen  
within the DVD's menu  
Play  
Starts playback  
N
Return  
O
Pause  
Stop  
Pauses playback  
Stops playback (  
X
x
Displays and changes audio options on  
DVDs with multiple audio tracks  
Audio Options  
Angle Options  
Subtitle Options  
Displays and changes viewing angles on  
DVDs recorded with multi-angle options  
Specifies a scene for playback, and starts  
playback of the scene that has been set  
A-B Repeat  
Displays and changes subtitle options on  
DVDs with subtitle options  
(
Begins playback of titles or chapters in a  
random order ( page 22)  
Shuffle Play  
Skips to the selected title, chapter or the  
specified time, and starts playback  
Go To  
(
Begins playback of titles or chapters in a  
programmed sequence ( page 21)  
Program Play  
Displays and changes options for  
Setup  
language, picture quality, Parental Control  
Selects repeated playback of all the titles  
on the disc, or one title or one chapter  
level, audio, etc. (  
Repeat Play  
(
Displays the current title or chapter  
number, the elapsed time, etc.  
Time Display  
For DVD-RW discs (VR mode), selects  
(
Original/Play List Original or Play List content to play  
(
Displays the direct button functions of the  
analog controller (DUALSHOCK®2)  
Help  
Clears selected numbers or playback  
modes ( page 23)  
Clear  
Used to enter the number of a chapter you  
Go to Chapter  
Previous/Next  
Search  
0~9  
want to play (  
Hints  
Returns/skips to the beginning of the  
current, previous or next chapter  
• You can use " " to check the options that can be accessed directly using the  
buttons of the analog controller. To access the options directly using the controller,  
you must clear the Control Panel from the screen.  
./>  
Fast reverses/forwards playback  
/
/
• Depending on the playback mode, some options may not be available or cannot be  
adjusted.  
(
Changes to playback/reverse playback in  
slow-motion  
Slow  
Watching a DVD  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a DVD  
Selecting a specific scene for playback  
1 Turn on the console and insert a disc ( page 10).  
Selecting a scene by chapter number  
Follow steps 1 to 4 of "Starting a game". Playback begins.  
1 During playback, select the desired chapter number in the  
Control Panel ( page 17) and then press the  
button.  
Hints  
Playback of the selected chapter begins. If you want to play a chapter  
with a single digit number (i.e. 1-9), enter a leading zero. For example,  
enter as "01".  
• If you turn on the console after inserting a disc, playback will begin automatically.  
EN  
• You can also start playback from the Browser screen (  
page 30).  
Selecting a scene by title number, chapter number or by  
specifying the time  
Ending DVD playback x  
1 During playback, select x in the Control Panel ( page 17)  
1 During playback, select  
in the Control Panel  
page 17) and then press the button.  
and then press the button.  
(
Playback stops. Press the A (open) button on the console front, and  
then remove the disc.  
2 Select an item, and then press the  
button.  
Title  
Specifies the title number  
Playing a DVD from the last stopping point  
(Resume Play)  
Chapter  
Specifies the chapter number  
C XX:XX:XX  
(or T XX:XX:XX)  
Specifies the elapsed time for the chapter (or title)  
1 During playback, select x in the Control Panel ( page 17)  
and then press the  
button.  
2 Select N, and then press the  
button.  
3 Select the numbers for the desired scene, and then press the  
Playback begins from the point where you stopped the disc in step 1.  
button.  
Playback of the selected chapter begins.  
To clear Resume Play  
After step 1, select x and then press the  
button.  
Watching a DVD  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Finding a particular point on a DVD (Search)  
Displaying playback information  
You can display information such as the current title number or elapsed  
time.  
You can search either forwards or backwards to quickly locate a particular  
point on a DVD.  
1 During playback, select  
in the Control Panel  
page 17) and then press the button.  
(
1 During playback, select  
or  
in the Control Panel  
button.  
The display changes as shown below each time you press the  
button.  
(
page 17) and then press and hold the  
Search speed changes as shown below when you press either the up or  
down directional button while holding down the  
button.  
Title X Chapter X  
Title X Chapter X  
Title number and chapter number  
• Search 3  
• Search 2  
• Search 1  
• Slow  
C
XX:XX:XX Elapsed time of current chapter  
Title X Chapter X C - XX:XX:XX Remaining time of current chapter  
Title X Chapter X XX:XX:XX Elapsed time of current title  
T
2 Release the  
searching for.  
button when you reach the point you are  
Title X Chapter X T - XX:XX:XX Remaining time of current title  
(Off)  
Playback returns to normal speed.  
Hint  
To use the analog controller for Search during playback, press and hold down the L2  
or R2 button to begin searching. Use the directional buttons to change speeds.  
Release the L2 or R2 button when you reach the point you are searching for.  
Watching a DVD  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Selecting Original or Play List for DVD-RW  
playback  
Using the playback modes  
When using a DVD-RW disc (VR mode), you can select the type of titles  
you want to play.  
Using the various playback modes, you can play titles or chapters in the  
order you want or repeat playback of a specific scene. There are four  
playback modes:  
1 With playback stopped, select  
page 17) and then press the  
in the Control Panel  
button.  
EN  
• Program Play ( page 21)  
• Shuffle Play ( page 22)  
(
Original and Play List will be selected in turn each time you press the  
• Repeat Play ( page 22)  
button.  
• A-B Repeat ( page 22)  
Original  
Plays content in the originally recorded sequence  
Plays edited content. Play List is the default setting.  
The following instructions assume use of the Control Panel ( page 17)  
to operate the DVD player.  
Play List  
Hints  
Hints  
• Slow-motion play in reverse is not available for DVD-RW discs (VR mode).  
• You can play combinations of Program Play, Shuffle Play, and Repeat Play. Note,  
however, that some Shuffle Play or Repeat Play options may not be available  
depending on the combination.  
• You cannot use this function with Resume Play. Clear Resume Play (  
before selecting this feature.  
• The PlayStation®2 console plays disc content as recorded in the DVD software.  
Program Play  
You can create programs to play titles and chapters in any order.  
1 During playback, select  
in the Control Panel  
button.  
(
page 17) and then press the  
2 Select a program number, and then press the  
button.  
If no programs have been set, the only option will be "1. Title".  
3 Select the title number, and then press the  
button.  
Using the playback modes  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4 Select the chapter number, and then press the  
button.  
Repeat Play  
To play all the chapters, select "All". Repeat steps 2 to 4 to set other  
titles or chapters.  
You can set this option to play titles or chapters repeatedly.  
1 Select  
press the  
in the Control Panel ( page 17), and then  
button.  
5 Press the START button.  
Program Play begins.  
The display changes as shown below each time you press the  
button.  
Hint  
The setting will not be cleared after Program Play finishes.  
Disc Repeat  
Title Repeat  
Repeats playback of all titles  
Repeats playback of one title  
Shuffle Play  
Chapter Repeat Repeats playback of one chapter  
Repeat Off Clears Repeat Play  
You can set this option for random playback of all titles or chapters  
recorded on a disc. Playback order will be different each time Shuffle Play  
is used.  
2 Select N, and then press the  
button.  
1 Select  
press the  
in the Control Panel ( page 17), and then  
button.  
The display changes as shown below each time you press the  
button.  
A-B Repeat  
You can set a specific scene to be played repeatedly.  
Title Shuffle  
Plays titles in random order  
1 During playback, select  
in the Control Panel  
page 17) and then press the button at the point you  
Chapter Shuffle Plays chapters in random order  
(
Shuffle Off  
Clears Shuffle Play  
want to start repeated playback.  
The starting point (point A) is set.  
2 Select N, and then press the  
button.  
2 Press the  
playback.  
button at the point you want to end repeated  
The ending point (point B) is set, and repeated playback of the section  
from A to B begins.  
Using the playback modes  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Clearing playback modes  
Adjusting DVD player settings  
Clears playback modes to allow normal playback.  
1 Select  
press the  
in the Control Panel ( page 17), and then  
button.  
You can use the Control Panel to adjust DVD player settings, such as the  
language for subtitles, audio language, and Parental Control level.  
A message stating, "Play mode contents cleared", is displayed and the  
console returns to normal playback.  
EN  
Hints  
• Some DVDs do not support all settings. The PlayStation®2 console plays disc  
content as recorded in the DVD software. If the DVD does not support the features  
listed, you will not be able to change the settings.  
Hint  
If multiple playback modes have been set in a combination, all playback modes are  
cleared.  
• The following options are not available during playback or Resume Play  
(
page 19). Clear Resume Play before changing these settings.  
– "Menu", "Audio" and "Subtitles" in Language Setup  
– "TV Type" and "Progressive" in Screen Setup  
– "Parental Control" in Custom Setup  
– "DTS" and "Audio Track Auto Select Mode" in Audio Setup  
You can change DVD player settings using the following procedure:  
1 Select  
the  
in the Control Panel ( page 17), and then press  
button.  
The Setup icon bar is displayed.  
2 Select the icon for the setting you want to change, and then  
press the  
button.  
The current setting for each item is displayed.  
3 Select the desired item, and then press the  
button.  
The menu option becomes active and can be selected.  
Adjusting DVD player settings  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4 Select the desired setting, and then press the  
button.  
Setting TV display options  
The setting of the item is completed. For details, see the instructions  
for each item ( pages 24 to 29).  
In the Screen Setup menu, you can set the screen size (aspect ratio) and  
other options that affect picture quality.  
Hints  
TV Type  
• The default setting for each menu item is underlined in the explanations below.  
• To return to the Control Panel after making settings, press the SELECT button.  
• Settings are saved when you do any of the following:  
– Stop playback (including stopping Resume Play)  
You can set the aspect ratio to match the screen of the connected TV.  
16:9  
Select this option when using a wide screen TV or a standard  
TV with special 16:9/wide screen functionality.  
– Open the disc cover  
Setting language options  
4:3 Letter Box  
4:3 PAN SCAN  
Select this option when using a standard TV. This setting  
displays a wide picture with margins on the upper and lower  
portions of the screen.  
In "Language Setup" you can choose the language for the DVD's menu,  
audio and subtitles. Note that if you select a language that is not recorded  
on the DVD, one of the recorded languages is selected automatically.  
Select this option when using a standard TV. This setting  
displays a picture adjusted to the height of the screen, cutting  
off portions at left and right that do not fit.  
Menu  
Selects the language for the DVD's menu  
Selects the language for the DVD's audio track  
Selects the language for the DVD's subtitles  
Audio  
Subtitles  
Hint  
Hint  
When you set "Progressive" to "On", "TV Type" is automatically set to "16:9".  
If you select "Audio Follow" for subtitles, the subtitle language will automatically be  
set to match the language selected for the DVD's audio track.  
Adjusting DVD player settings  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
DNR (Digital Noise Reduction)  
Progressive  
You can use this setting to help reduce roughness in the on-screen image  
and produce a cleaner picture.  
You can display an image in which the picture updates all the lines in one  
pass. In most cases, this results in a clearer, flicker-free image. This feature  
is available only if your TV and AV cable* support progressive scan  
(480p).  
Off  
DNR is not used.  
* The component AV cable (sold separately) is compatible with progressive scan.  
DNR1  
DNR2  
Increases picture quality  
Increases picture quality (maximum)  
On  
Select this option when the console is connected to a TV that supports  
progressive scan (480p).  
EN  
Hints  
Off  
Select this option when the console is connected to a standard TV.  
• "DNR2" is more effective for reducing image roughness than "DNR1", but in some  
cases an afterimage may appear. If this occurs, select "Off".  
• The DNR function may produce limited results on some DVDs.  
• When you set "Progressive" to "On", "DNR" is automatically turned off and cannot  
be turned on.  
Hints  
• If picture quality is reduced or no image is displayed, set "Progressive" to "Off"  
when the console is connected to a TV without the necessary equipment. If you  
accidentally set this option to "On" for such a TV, picture quality may be reduced  
or the picture may not be displayed. To clear the setting, follow these steps:  
Outline Sharpening  
You can sharpen or soften the outline of the on-screen image. The higher  
the value, the sharper the outline. Normally, select "0".  
Check that you have a DVD in the console.  
1
2
Press the _/1(on/standby)/RESET button on the console front.  
Then press and hold down the START button of the analog controller  
(DUALSHOCK®2) in controller port 1 until the DVD picture is displayed.  
The "Progressive" setting is returned to "Off", allowing the DVD-Video to  
be displayed as normal. You can also cancel this setting using the "Clear  
• -2  
• -1  
• 0  
• +1  
• +2  
Progressive Setting" (  
screen.  
• DVDs can contain video-based and film-based material, which use different frame  
rates. When playing video-based material using progressive scan, some images  
may appear unnatural. If this occurs, set "Progressive" to "Off" and view in  
standard interlace mode.  
page 35) option in the Version Information  
Hint  
Depending on the DVD, Outline Sharpening may produce limited results.  
Display  
During playback, you can display playback status information in the top  
right corner of the screen for a few seconds.  
• When you set "Progressive" to "On", "TV Type" (  
to "16:9".  
page 24) is automatically set  
• DVD-RW disc (VR mode) content can only be viewed in standard interlace format.  
The "Progressive" option is not available when playing such content.  
On  
Playback status information is displayed for a few seconds.  
Playback status information is not displayed.  
Off  
Adjusting DVD player settings  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Select the region to base the Parental Control level on, and  
then press the button.  
Setting viewer options  
If you select "Other", see "Region code list" ( page 27).  
Pause mode  
You can use this option to set the picture status when playback is paused.  
5 Select "Level", and then press the  
button.  
The list of level options is displayed.  
Auto  
A picture with moving elements is displayed without jitter. Normally  
select this position.  
6 Select a restriction level, and then press the  
button.  
Frame  
A picture without moving elements can be displayed at high resolution.  
To clear Parental Control  
With DVD playback stopped, go to step 6 in "Setting Parental Control" and  
set "Level" to "Off".  
Parental Control  
In some regions, the viewing of some DVD content may be restricted  
based on viewer age or other factors. You can use the Parental Control  
feature to restrict the level of content that may be viewed through your  
console.  
The lower the value, the stricter the restriction.  
Setting Parental Control  
1 Select "Parental Control", and then press the  
button.  
The screen for registering a password is displayed. If a password has  
already been registered, the screen for confirming the password is  
displayed.  
2 Select a number, and then press the  
button.  
Repeat step 2 to enter a four-digit password. If you want to clear a  
number, press the button. When registering a password, you are  
required to enter it again for confirmation.  
3 Select "Region", and then press the  
button.  
The list of region options is displayed.  
Adjusting DVD player settings  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Region code list  
1 Using the directional buttons, select "Change Password" and  
then press the button.  
To enter a Parental Control region code, select "Other" in step 4 of "Setting  
Parental Control" ( page 26). Use the directional buttons to select the  
first letter, and then press the right directional button. Then select the next  
The screen for changing the password is displayed.  
letter and press the  
button.  
2 Select a number, and then press the  
button.  
Repeat step 2 to enter a four-digit password. You are required to enter  
Region  
Code  
GB  
IT  
Region  
China  
Code  
CN  
DK  
DE  
JP  
it again for confirmation.  
EN  
United Kingdom  
Italy  
Playing a disc restricted by Parental Control  
Denmark  
Germany  
Japan  
1 Start playback of the DVD ( page 19).  
Indonesia  
Austria  
ID  
You will be prompted to temporarily change the Parental Control level  
to allow playback. This usually occurs immediately at disc start-up but  
may also occur at different times depending on the DVD.  
AT  
NL  
CA  
KR  
SG  
CH  
SE  
Netherlands  
Canada  
Norway  
Philippines  
Finland  
France  
NO  
PH  
FI  
2 Using the directional buttons, select "Yes" and then press the  
button.  
Korea  
The screen for entering the password is displayed.  
Singapore  
Switzerland  
Sweden  
FR  
Belgium  
Hong Kong  
Malaysia  
Russia  
BE  
HK  
MY  
RU  
3 Select a number, and then press the  
button.  
Repeat step 3 to enter the four-digit password. After entering the  
password, playback will begin again. When DVD playback is stopped,  
the Parental Control level returns to the original setting.  
Spain  
ES  
Thailand  
Taiwan  
TH  
TW  
Hints  
• If you forget your password, see the Quick Reference (  
page 2).  
• If you do not set a password, you cannot change the Parental Control settings.  
• Some DVDs with the Parental Control feature do not allow use of playback modes  
Changing your password  
(
In step 2 of "Setting Parental Control" ( page 26), complete the  
following steps:  
Adjusting DVD player settings  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dolby Digital  
Setting sound options  
This option sets Dolby Digital as the output signal for the DIGITAL OUT  
(OPTICAL) connector.  
Audio Digital Out  
On  
Select this option when the console is connected to an audio device  
with a built-in Dolby Digital decoder.  
You can switch the method of outputting the audio signal when you  
connect the following audio devices to the DIGITAL OUT (OPTICAL)  
connector.  
Off  
Select this option when the console is connected to an audio device  
without a built-in Dolby Digital decoder.  
Caution  
DTS  
When the console is connected to an audio device without a Dolby Digital, DTS  
or MPEG decoder, set "Dolby Digital", "DTS" and "MPEG" to "Off". If you set  
these options to "On" without the necessary decoder, you may have no sound or  
an extremely loud noise may be emitted.  
This option sets DTS as the output signal for the DIGITAL OUT  
(OPTICAL) connector.  
On  
Select this option when the console is connected to an audio device  
with a built-in DTS decoder.  
Digital Out (Optical)  
This option sets the type of output for the DIGITAL OUT (OPTICAL)  
connector.  
Off  
Select this option when the console is connected to an audio device  
without a built-in DTS decoder.  
On  
Select this option when you want sound (audio signal) to be output  
through the DIGITAL OUT (OPTICAL) connector.  
MPEG  
Settings for "Dolby Digital", "DTS" and "MPEG" are displayed.  
This option sets MPEG AUDIO as the output signal for the DIGITAL  
OUT (OPTICAL) connector.  
Off  
Select this option when you do not want sound to be output through the  
DIGITAL OUT (OPTICAL) connector.  
On  
Select this option when the console is connected to an audio device  
with a built-in MPEG decoder.  
Settings for "Dolby Digital", "DTS" and "MPEG" are not displayed.  
Off  
Select this option when the console is connected to an audio device  
without a built-in MPEG decoder.  
Adjusting DVD player settings  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Audio Track Auto Select Mode  
This setting gives priority to the audio track that contains the highest  
number of channels when you play a DVD on which multiple audio  
formats (PCM, Dolby Digital, DTS or MPEG) are recorded. If PCM,  
Dolby Digital, DTS and MPEG have the same number of channels, the  
console selects PCM, Dolby Digital, DTS and MPEG audio tracks in that  
order.  
EN  
On  
Priority given  
Off  
No priority given  
Hints  
• If you set "DTS" to "Off" in "Audio Digital Out" (  
track is not played.  
page 28), the DTS audio  
• Depending on the DVD, the audio channel with priority may be predetermined. In  
this case, the audio track will be selected based on the DVD's order of priority.  
DVD Volume  
You can set this option if the audio output level of the DVD is low. You  
can set this only when "Digital Out (Optical)" is set to "Off" in "Audio  
Digital Out" ( page 28).  
+2  
+1  
Turns up the volume (maximum)  
Turns up the volume  
Standard Normally select this option.  
Caution  
If you set this option to "+1" or "+2", the sound may become distorted. If this  
happens, change the setting to "Standard". Also note that if you set the volume  
too high, it may harm your hearing or damage the speakers.  
Adjusting DVD player settings  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Main menu  
Using the Browser screen  
Displaying the main menu  
You can do the following from the Browser screen:  
• Copy or delete game data saved on a memory card  
• Start a game  
From the main menu, you can access information and change various  
settings. You can also move to the following screens from the main menu.  
The main menu is displayed when you turn on the console without a disc  
inserted.  
• Start playback of an audio CD  
• Start playback of a DVD  
• Browser screen ( page 30)  
1 Display the main menu ( page 30).  
• System Configuration menu ( page 31)  
• Version Information screen ( page 34)  
2 Using the directional buttons, select "Browser" and then  
1 Turn on the console ( page 8).  
press the  
button.  
The main menu is displayed. Note that it may take some time for the  
main menu to be displayed.  
The Browser screen is displayed.  
3 Insert a disc or memory card.  
The icon for the inserted item is displayed in the Browser screen.  
\
Hint  
If you turn on the console with a disc inserted, the main menu will not be displayed.  
To display the main menu, press the A (open) button on the console front and  
remove the disc. Then press the _/1 (on/standby)/RESET button to reset the console.  
Displaying the main menu  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
4 Select an icon, and then press the  
button.  
• When you select the memory card icon, icons for data saved on the  
memory card are displayed. To copy or delete game save data, see  
Using the System Configuration  
menu  
• If you select the icon for a PlayStation®2 or PlayStation® format  
software disc, the game will start.  
From the System Configuration menu, you can change settings for  
numerous options including language or time display, and audio or video  
output method.  
• When you select the icon for an audio CD disc, the tracks contained  
on the CD are displayed. See "Playing an audio CD" ( page 15).  
• If you select the icon for a DVD disc, playback of the DVD will  
begin.  
EN  
1 Display the main menu ( page 30).  
Hint  
2 Using the directional buttons, select "System Configuration"  
The message "There is no data" is displayed on the Browser screen when no memory  
card or disc is inserted in the console.  
and then press the  
button.  
The System Configuration menu is displayed.  
3 Select an item, and then press the  
button.  
The menu option becomes active and can be selected.  
4 Select the desired setting, and then press the  
button.  
For details, see the instructions for each menu item ( pages 32 to  
33).  
Using the System Configuration menu  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Hints  
Screen Size  
• The default setting for each menu item is underlined in the explanations below.  
• Changes to each setting are saved and remain in effect even after you turn off or  
reset the console.  
You can set the display mode for the TV.  
4:3  
Select this option when using a standard TV with the  
console.  
Clock Adjustment  
Full*  
Select this option when using a standard TV with the  
console. The black margins on the upper and lower  
portions of the screen are cut off.  
You can set the date and time. Use the directional buttons to set "Year",  
"Month", "Day", "Hour", "Minute" and "Second". The setting goes into  
effect when you press the  
button.  
16:9  
Select this option when using a wide screen TV or a  
standard TV with special 16:9/wide screen  
functionality.  
Optional settings  
If you press the  
button at the "Clock Adjustment" screen, you can set  
* "Full" display mode is compatible with the System Configuration menu, Browser  
screen and audio CD screen.  
options such as "Date Format" or "Time Format". Use the directional  
buttons and the  
Time Format  
button to make each setting.  
Sets the system clock to either 12-hour or 24-hour  
clock display  
Digital Out (Optical)  
You can set whether to output the signal through the DIGITAL OUT  
(OPTICAL) connector.  
Date Format  
Time Zone  
Sets the display order of year, month and day  
Sets the time zone  
On  
Select this option when you want to output signal  
through the DIGITAL OUT (OPTICAL) connector.  
Daylight Savings Time  
Sets Standard or Daylight Savings (Summer Time).  
Normally select "Standard".  
Off  
Select this option when you do not want to output  
signal through the DIGITAL OUT (OPTICAL)  
connector.  
Using the System Configuration menu  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Hint  
Component Video Out  
The following limitations apply when using the DVD remote control with the option  
set to "Gameplay Function On":  
When using the component AV cable (sold separately), you must set the  
mode to match the input jacks on your TV.  
– Depending on the software, some remote control buttons may not work properly.  
– The buttons of the DVD remote control will not work when two or more buttons  
are pressed at the same time.  
Y Cb/ Pb Cr/ Pr  
RGB  
Select this option when connecting the console to  
component video input connectors.  
– Some software titles may stop operating properly when a controller is removed  
from controller port 1. If this happens, set to "Gameplay Function Off".  
EN  
Select this option when connecting the console to  
RGB input connectors.  
Language  
Hint  
You can use this option to select the language displayed on the main menu,  
Browser screen, System Configuration menu, and Version Information  
screen.  
The "RGB" setting is only for PlayStation®2 and PlayStation® format software.  
When you watch a DVD, the mode automatically switches to "Y Cb/ Pb Cr/ Pr".  
Traditional Chinese  
English  
Displays messages in Traditional Chinese (default  
setting for SCPH-90007)  
Remote Control  
You can set this option when using the DVD remote control (for  
PlayStation®2) (sold separately).  
Displays messages in English (default setting for  
SCPH-90006)  
Gameplay Function On  
Select this option when operating PlayStation®2 or  
PlayStation® format software with the DVD remote  
control.  
Gameplay Function Off  
Select this option when not operating PlayStation®2  
or PlayStation® format software with the DVD  
remote control.  
Using the System Configuration menu  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3 Select the desired setting, and then press the  
button.  
For details, see the instructions for each item ( pages 34 to 36).  
Using the Version Information  
screen  
Hint  
The default setting for each menu item is underlined in the explanations below.  
You can check version information for various console components by  
selecting this option. You can also change optional settings for some items.  
Console  
1 At the main menu ( page 30), press the  
button.  
The PlayStation®2 console automatically adjusts its internal settings for  
optimal playback. When "Diagnosis" is set to "On", the console makes  
additional adjustments.  
The Version Information screen is displayed.  
Diagnosis  
Off  
On  
Diagnosis is turned off.  
Diagnosis is turned on.  
Hint  
The "Diagnosis" setting will automatically return to the default setting in the  
following cases:  
Optional settings  
– When playback of PlayStation®2 or PlayStation® format software or a DVD  
begins  
Optional settings are available for "Console", "PlayStation® Driver" and  
"DVD Player". "DVD Player" can be set only if the DVD player's  
"Progressive" option is set to "On".  
– When the console is reset  
– When the console is turned off  
1 Using the directional buttons, select an item and then press  
the  
button.  
The current setting for the item is displayed.  
2 Select an item, and then press the  
button.  
The available options are displayed.  
Using the Version Information screen  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
PlayStation® Driver  
DVD Player  
You can set the PlayStation® Driver program to optimize performance of  
PlayStation® format software.  
If you set "Progressive" to "On" when the console is connected to a TV  
without the necessary equipment, the picture quality may be reduced or the  
picture may not be displayed. You can clear the "Progressive" setting by  
following the procedure below.  
Hint  
Remove the DVD before clearing the setting.  
The settings will automatically return to the default settings in the following case:  
– When the console is turned off  
EN  
Clear Progressive Setting  
Disc Speed  
No  
Leaves the "Progressive" setting on  
Clears the "Progressive" setting  
Standard Loads discs at normal speed  
Yes  
Fast  
Loads discs at high speed  
1 Display the Version Information screen.  
Hint  
Set to "Standard" in the following cases:  
2 Using the directional buttons, select "DVD Player" and then  
– When fast loading does not produce improved results  
– When using software that is not compatible with fast loading  
press the  
button.  
The "Clear Progressive Setting" option is displayed.  
Texture Mapping  
3 Press the  
button.  
Standard Displays as normal  
4 Select "Yes", and then press the  
button.  
Smooth  
Displays with reduced roughness in on-screen images  
5 Press the  
button twice.  
The display returns to the main menu.  
Hint  
Set to "Standard" in the following cases:  
– When smooth texture mapping does not produce improved results  
– If the picture does not display properly when set to "Smooth"  
6 Press the A (open) button on the console front, and place a  
DVD in the console.  
Using the Version Information screen  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7 Close the disc cover.  
Playback begins.  
Hint  
The setting will not be cleared if 1) you do not start a DVD after step 4 or 2) you reset  
or turn off the console before step 6.  
Using the Version Information screen  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Networking  
Connecting with an Ethernet cable  
Connecting to a network  
You can connect the console to a network using an Ethernet cable  
connected to the network connector on the console rear. You can connect  
to a 100 Base-TX or 10 Base-T network. Refer to the instructions supplied  
with the network device for details.  
You can enjoy online games by connecting the PlayStation®2 console to a  
network. To play online games, you will need the following:  
• A network compatible PlayStation®2 game  
EN  
Basic network setup  
• Broadband Internet service  
Network line  
Network equipment  
• A commercially available Ethernet cable  
This will vary depending on the  
type of broadband service in your  
home.  
The type of equipment used will also  
vary depending on the type of  
service.  
• A memory card (8MB) (for PlayStation®2) (sold separately)  
Hints  
• You cannot play online games with this console using a dial-up or ISDN  
connection.  
DSL modem, etc.  
• There are two types of Ethernet cables: straight-thru cables and crossover cables.  
Refer to the instructions supplied with the network device for details.  
Commercially  
available Ethernet cable  
PC  
MEMORY CARD  
MEMORY CARD  
Hint  
When connecting the console and a PC to the network, a network device such as a  
router or a hub may be required. Refer to the instructions supplied with the network  
device for details.  
Connecting to a network  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting the console  
Warning  
Do not connect Ethernet cables or telephone cords of the following types to the  
network connector; too much electrical current may pass through the connector,  
causing a malfunction, excessive heat or fire in the connector:  
- Ethernet cables not appropriate for use with a 10Base-T/100Base-TX network  
- Standard residential telephone lines  
Warning  
Do not plug the AC power cord for the console into the electrical outlet until you  
have made all other connections.  
- Any ISDN (digital) compatible phone or data line  
- PBX phone lines  
1 Connect the Ethernet cable to the network connector on the  
console rear.  
- Other "unknown" types of telephone lines  
Console rear  
Commercially available Ethernet cable  
2 Insert the connector on the Ethernet cable to the network  
device.  
The connection method will vary depending on the network device.  
Refer to the instructions supplied with the network device for details.  
Connecting to a network  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Creating network settings  
After you have connected an Ethernet cable to the console, you will need  
to create and save network settings. Actual network settings may vary  
depending on the online game being played. Refer to the instructions  
supplied with the software for details.  
EN  
Items you will need  
To create a network setting, you will need the following items:  
• A memory card (8MB) (for PlayStation®2) (sold separately)  
• Login and network setup information provided by your Internet service  
provider  
Hint  
Depending on the type of Internet service used, you may need to provide your MAC  
address. You can find the MAC address for your console listed in the Version  
Information screen (  
page 34).  
Creating network settings  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
About national export control  
Additional information  
This product may fall within the scope of national export control  
legislation. You must comply fully with the requirements of such  
legislation and of all other applicable laws of any jurisdiction in relation to  
this product.  
Specifications  
Design and specifications are subject to change without notice.  
About access control  
This product incorporates access control technology. Use of software not  
specifically designed for this product (excluding DVD-Videos and audio  
CDs) and copies of software designed for this product are prevented by  
access control. Unauthorized transfer, delivery, display, export, import, or  
transmission of programs, devices, or the product modified with programs  
or devices, to defeat the purpose of this access control feature is or may be  
prohibited by law.  
General  
Power requirements  
AC220-240V 50Hz (SCPH-90006)  
AC110V 50/60Hz (SCPH-90007)  
Power consumption (approx.)  
Console dimensions (approx.)  
Console mass (approx.)  
Signal format  
35 W  
230 × 28 × 152 mm / 9 × 1 × 6 in (w/h/d)  
720 g  
NTSC  
Operating temperature  
5° C to 35° C / 41° F to 95° F  
Inputs/outputs on the console  
front  
Controller port (2)  
MEMORY CARD slot (2)  
USB connector (2)  
Inputs/outputs on the console  
rear  
NETWORK connector  
~AC IN connector  
AV MULTI OUT connector  
DIGITAL OUT (OPTICAL) connector  
Supplied accessories  
See the Quick Reference ( page 2).  
Specifications  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
EN  
Specifications  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PlayStation®2 主機文件  
DVD  
DVD...........................................57  
PlayStation®2機文件包括內:  
使用播放方式 ......................................61  
調DVD放設定 ..................................63  
快捷參考  
本文件隨附在主機外裝箱中,包含有關主機設定和基本操作,以及安全和故障  
檢修的資訊。  
主選單  
用戶指本文)  
可通過網路閱覽本PDF其中包含有關主機進階操作的資訊、技術  
規格及其他資訊。您可透Sony Computer Entertainment支援頁面  
顯示主選單 ........................................70  
瀏覽器畫面 ........................................70  
使用系統設定選單 ..................................71  
版本資訊畫面 ......................................74  
目錄  
網路  
連接網路 ..........................................77  
新建網路設定 ......................................78  
準備工作  
其他資訊  
規格 ..............................................79  
開始使用之前 ......................................43  
各部名稱...........................................44  
連接至電視機 ......................................45  
連接搭配數碼端子的音響設備 ........................46  
連接控制器.........................................47  
連接交流電源線 ....................................47  
打開和關閉主機電源 ................................48  
遊戲  
玩遊戲.............................................50  
使Memory Card記憶卡).........................53  
CD  
播放音CD........................................55  
42  
目錄  
Download from Www.Somanuals.com. All Manuals Search And Download.  
垂直位置  
準備工作  
當垂直放置主機時,請使用  
PlayStation®2用直立SCPH-90110  
(選購品。  
開始使用之前  
拆除 3 插針電源插頭轉換SCPH-  
90006)  
提示  
CT  
有些 PlayStation®2 專用直立架不能用於本機型 PlayStation®2 主機。詳細  
牆壁電源插座形狀依區域而異。若插座形狀與您居住之區域的電源  
插座不相容時,請鬆開螺絲並插掉電源插頭轉換器。  
請閱覽快捷參(  
42買直立架時SCPH-90110立架。  
主電源插頭  
注意  
3針電源插頭轉換器  
切勿將主機放置在可能受到以下情況影響的場所:  
會受到過多香煙煙霧或灰塵影響的地方留在透鏡等內部零件上的香  
煙煙霧或煙灰可能會導致主機發生故障。  
受到極端溫度影響的地方、或受日光直接照射源旁或車窗關閉的車  
特別在夏天這些惡劣環境都可能會導致主機變形或引起主機發  
生故障。  
放置主機  
靠近磁場的地方,如磁鐵或揚聲器產生的磁場。  
會受到振動的地方。  
您可以水平或垂直放置主機。  
水平放置  
MEMORY CARD  
MEMORY CARD  
水平放置主機。  
43  
開始使用之前  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
PlayStation®2機背面  
各部名稱  
背面通風孔  
PlayStation®2機前面  
光碟蓋  
]/1 (啟/備)顯示燈  
A (打開)按鈕  
NETWORK網路)接口  
交流電源輸入端子  
]/1 (啟/備)/RESET  
(再啟動)按鈕  
MEMORY CARD記憶卡)插2  
MEMORY CARD記憶卡)插1  
DIGITAL OUTOPTICAL)  
(光纖數碼輸出)端子  
AV MULTI OUTAV重輸出)端子  
”家族標*  
提示  
類比控制DUALSHOCK®2)的各部名稱,請參使用類比控制器  
(DUALSHOCK®2”( 第 52 頁。  
MEMORY CARD  
MEMORY CARD  
控制器端1  
控制器端2  
紅外線接收器  
USB接埠  
* 您可以配合主機的放置方式,旋“  
”家族標誌。  
提示  
您可以連接與 PlayStation®2 主機相容的 USB 設備。但請注意,並不是所有  
USB容產品都能PlayStation®2機配合使用細說明參閱所使用  
USB容周邊設備的使用說明書。  
44  
各部名稱  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
注意  
連接至電視機  
如果PlayStation®2”連接至電漿電(Plasma TV)、液晶方式以外  
的投影電視(Projection TV)時間放置,並不斷播放靜止畫面時,  
可能會出現影像發生失真殘影現象。可能造成這類現象之靜止畫面包括  
主機的設定選單、DVD單,或暫停畫面等。假如時間過久,甚至可能  
令電視機螢幕造成永久的傷害。詳細說明,請參閲電視機附帶的使用説  
明書。  
連接之前  
在完成所有連接之前,請勿將主機交流電源線插頭插入電源插座。  
* 液晶顯示類型除外  
確認已關閉電視機的電源。  
CT  
提示  
本主機可以連接至錄影機或電視結合錄影機的二合一電器。但在播放被設定  
了防拷密碼DVD,可能會出現畫質鮮明度降低的現象,敬請注意。  
使用附屬AV接線連接電視機  
如下圖所示將主機連接至電視機。  
主機背面  
電視機的音頻和視頻輸入  
VIDEO  
L-AUDIO-R  
AV MULTI OUT  
(AV重輸出)  
端子  
連接單聲道電視  
機時不要連接。  
AV接線  
45  
連接至電視機  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
使用選購連接線時  
連接搭配數碼端子的音響設備  
畫質可能會因您所使用的連接線類型而有所差異。請參閱以下資訊  
確定最佳的連接方法。  
使用市售的光纖數碼連接線,您可以欣賞到有如置身電影院或音樂  
廳般的臨場效果將主機連接至搭配數碼端子的音響設備時參  
閲所連接設備的使用説明書。  
當使用市面上販賣的其他連接線時參閲該連接線的使用説明書。  
電視機  
連接線類型  
主機背面  
S 像輸入端子的電視機  
S頻連接SCPH-10480)  
具備影像色差輸入端子的電視機 影像色差連接SCPH-10490)  
所連接的設備  
DIGITAL IN  
畫質等級圖  
高畫質  
OPTICAL  
x AV附帶)  
x S頻連接線  
x 影像色差連接線  
此等級圖僅作參考。畫質可能會因您所選用的電視機或狀況而改變。  
市售的光纖數碼連接線  
提示  
若要使用逐行掃描,您必須準備支援逐行掃480p)的電視機,並且必  
須使用機能相容的連接* 進行連接還必須確認主機設定正確細説  
明,請參設定電視機顯示選項”中Progressive逐行掃描)  
提示  
使用光纖數碼連接線將主機連接至音響裝置時PlayStation®2格之  
軟件可能會出現無法播放聲音的異常現象。如果發生此情況,請使用附帶  
AV接線,並將其連接至主機AV MULTI OUTAV重輸出)端子而  
不要使用光纖數碼連接線。  
64。  
* 影像色差連接選購品)相容逐行掃描機能。  
您不能將本主機連接至帶HDTV用影像色差輸Y PB PR)的電視機。  
詳細説明,請參閲電視機附帶的使用説明書。  
連接數碼音響裝置後,請選擇系統設定選單,DIGITAL OUT  
(OPTICAL)光纖數碼輸出)設定詳細説明,請參閱  
“DIGITAL OUT (OPTICAL)光纖數碼輸出(  
72。  
46  
連接搭配數碼端子的音響設備  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
連接控制器  
連接交流電源線  
1 將類比控制DUALSHOCK®2)插入主機的控制器端子。  
主機前面  
警告  
請插入接近且容易連接的電源插座。  
MEMORY CARD  
在完成所有連接之前,請勿將主機交流電源線插頭插入電源插座。  
MEMORY CARD  
MEMORY CARD  
CT  
1 請將交流電源線插入主機後方的交流電源輸入端子。  
主機背面  
交流電源輸入端子  
交流電源線  
類比控制器  
(DUALSHOCK®2)  
提示  
某些軟件可能會指定控制器端子的使用位置。詳細説明,請參閲該軟件附帶  
的使用説明書。  
47  
連接控制器  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2 將交流電源線插頭插入電源插座。  
打開和關閉主機電源  
主機背面  
打開主機電源之前  
在完成這些步驟之前勿打開主機電源細説明參閲電視機  
附帶的使用説明書。  
交流電源線  
至電源插座  
打開電視機。  
改變電視機設定,以顯示主機所連接綫路的輸出。  
有些地區可能使用與插圖中  
不同的電源插座插頭。  
打開主機電源  
主機前面=/1(啟/示燈亮起紅色表主機處於  
預備狀態。  
1 確認主機前面=/1 (啟/備)顯示燈亮起紅色。  
]/1 顯示燈  
2 按主機前面=/1(啟//RESET再啟動鈕。  
主機前面的 =/1 顯示燈變爲綠色,電視機將顯示主機輸出的訊  
息。  
主機前面  
MEMORY CARD  
MEMORY CARD  
=/1/RESET再啟動)按鈕  
主機前面  
=/1 顯示燈  
MEMORY CARD  
MEMORY CARD  
提示  
購買後第一次打開主機電源時,將顯顯示語言時區”設定夏  
令時間”設定畫面。請按照畫面顯示説明完成設定。  
如果將主機連接至寬螢幕電視機,則選擇系統設定選單設定“螢幕尺寸”  
72。  
48  
打開和關閉主機電源  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
關閉主機電源  
1 按住主機前面=/1/RESET再啟動)按鈕超過一秒鐘。  
=/1 顯示燈將變爲紅色,代表主機已經進入預備狀態。  
=/1/RESET再啟動)按鈕  
主機前面  
=/1 顯示燈  
CT  
MEMORY CARD  
MEMORY CARD  
警告  
當主機處於預備狀態時源並未完成關閉果您長時間不打算使用主  
機,請從電源插座中拔掉交流電源線插頭。  
49  
打開和關閉主機電源  
Download from Www.Somanuals.com. All Manuals Search And Download.  
遊戲  
玩遊戲  
將光碟標籤之面朝上放入主機。  
光碟蓋  
於放置光碟時,請務必要讓碟盤的  
3固定鉤壓在光碟的上方。  
MEMORY CARD  
MEMORY CARD  
A (打開)按鈕  
=/1/RESET再啟動)按鈕  
玩遊戲之前  
開始遊戲  
檢查至電視機和音響裝置的連接是否正確,是否符合以下項目中刊  
載的注意事項。  
1 打開主機電( 第48。  
顯示主選(  
70。  
“連接至電視機(  
“連接控制器(  
“連接交流電源線”(  
45)  
47)  
47頁)  
2 按主機前面A (打開)按鈕。  
光碟蓋打開。  
提示  
3 將光碟放入主機。  
若要玩線上遊戲,則首先需要連接網路,並進行網路設定。詳細説明,請參  
連接網路77。  
將光碟標籤之面朝上放置入光碟架中。  
50  
玩遊戲  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4 關閉光碟蓋。  
2 取出光碟。  
關閉光碟蓋後,即可開始遊戲。  
往下壓動光碟架的黑色中心部位,持拿光碟的邊緣。  
MEMORY CARD  
MEMORY CARD  
MEMORY CARD  
MEMORY CARD  
按光碟架的黑色中心部位。  
CT  
提示  
您也可以從瀏覽器畫面啓動遊(  
70。  
3 關閉光碟蓋。  
如果在插入光碟後打開主機電源,則遊戲將自動開始。  
4 =/1/RESET再啟動)按鈕。  
若要重新開始遊戲  
顯示主選(  
70。  
按主機前面\/1 (啟/備)/RESET再啟動)按鈕。在玩遊  
戲過程中,切勿意外按到 @/1/RESET再啟動)按鈕,否則將強制  
中止遊戲,並重新開始。  
更換遊戲光碟  
1 打開光碟蓋,取出光碟。  
取出光碟時,往下壓動光碟架的黑色中心部位,持拿光碟的邊  
緣。  
結束遊戲  
2 插入新的光碟。  
注意  
取出光碟時確認光碟已經完全停止果光碟正在旋轉切勿觸摸  
光碟,否則可能造成受傷、損壞光碟或主機故障。  
3 關閉光碟蓋,重新啟動主機。  
重新開始遊玩。  
1 按主機前面A 按鈕。  
提示  
當更換遊戲時不需要關閉主機。  
51  
玩遊戲  
Download from Www.Somanuals.com. All Manuals Search And Download.  
關於方式開關  
使用類比控制DUALSHOCK®2)  
ANALOG類比)方式開關,可更改類比控制器的控制方式,並  
切換至適宜的控制方式請注意些軟件會強制要求更改控制方  
式。  
類比控制器(DUALSHOCK®2)配備了壓力感應按鈕功能。同時還具有  
振動功能。  
數碼模式  
(顯示燈:關)  
類比模式  
(顯示燈:紅)  
各部名稱  
SELECT  
(選擇)按鈕  
START開始)  
按鈕  
R2鈕  
L2鈕  
提示  
L1鈕  
R1鈕  
按鈕  
當選擇數碼方式使用類比控制器時法使用左右類比操作桿時亦會關  
閉壓力感應按鈕功能。  
某些軟件並不對應 ANALOG類比)方式開關按鈕,用戶無法按此按鈕隨意  
切換控制方式。  
方向按鈕  
按鈕  
按鈕  
按鈕  
關於類比控制  
當播PlayStation®2格之軟件標題時可以在類比方式中使  
用除START開始SELECT選擇L3和R3按鈕以外的全部按鈕。  
當遊玩 PlayStation® 規格之軟件時,選擇類比模式亦只能使用左  
右類比操作桿。  
右類比操作/R3*  
方式顯示燈  
左類比操作/L3*  
ANALOG類比)方式開關  
提示  
* 左右類比操作桿L3R3能於類比模式顯示使用。  
某些軟件可能會限制類比方式所對應的按鈕。詳細説明,請參閲該軟件附帶  
的使用説明書。  
* 按下類比操作桿,即代表按L3R3鈕。  
提示  
關於振動功能  
使用類比控制DUALSHOCK®2)前,請打開主  
機,在開始遊戲之前先用拇指轉動一次左類比操  
作桿和右類比操作桿。請不要扭轉類比操作桿,  
請按照圖中所示的畫圓方法轉動。  
您可開啟軟件的選項設定選單,設定振動功能的有無。  
提示  
某些軟件可能會預先關閉振動功能,設定。  
52  
玩遊戲  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
關於使用類比控制DUALSHOCK®)  
(SCPH-110)  
使Memory Card記憶卡)  
您可以PlayStation®2機上使用類比控制(DUALSHOCK®),但  
選擇類比模式時的按鈕功能可能會與類比控制(DUALSHOCK®2)有  
所不同。且只能於切換至類比模式後始可使用左右類比操作桿。  
您可以使Memory Card(記憶卡存和載入遊戲資料也可以  
刪除遊戲資料Memory Card(記憶卡遊戲資料拷貝到另外  
的記憶卡。  
CT  
Memory Card記憶卡)類型  
Memory Card記憶卡)分為以下兩種。請配合遊玩的軟件,選擇適  
Memory Card記憶卡)使用。  
Memory Card(記憶卡) 相容軟件  
類型  
記憶體容量  
PlayStation®2用  
PlayStation®2格之軟件 8MB  
Memory Card記憶卡)  
(8MB)(SCPH-10020 G)  
Memory Card(記憶卡) PlayStation® 規格之軟件 15記憶體區塊  
(SCPH-1020)*  
120KB)  
* 本産品不再生産。  
MagicGateSONY司開發的著作權保護技術之名稱。  
53  
使Memory Card記憶卡)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3 拷貝”刪除然後按 按鈕。  
當拷貝遊戲資料時,請確認主機中插入了兩Memory Card記  
憶卡如果您選擇刪除則跳到步5。  
Memory Card記憶卡)  
Memory Card記憶卡)插入主機前面MEMORY CARD記憶卡)  
插口。  
4 選擇資料的拷貝位置,然後按 按鈕。  
主機前面  
MEMORY CARD  
5 然後按 按鈕。  
MEMORY CARD  
MEMORY CARD  
在拷貝或刪除資料過程中,請勿取Memory Card記憶卡。  
6 拷貝或刪除完成後,按 按鈕離開。  
提示  
提示  
若要觀看遊戲資料的關連資訊,請選擇該資料之圖示,然後按 按鈕確認  
詳細内容。  
某些軟件可能會指定控制器端子的使用位置。詳細説明,請參閲該軟件附帶  
的使用説明書。  
軟件Memory Card記憶卡)之間的相容性:  
- 您無法PlayStation®2格之遊戲資料儲存或拷貝Memory Card記  
憶卡SCPH-1020。  
保存或載入遊戲資料  
- 您無法PlayStation® 規格之遊戲資料儲存PlayStation®2用  
Memory Card記憶卡8MB但是,出於保存目的,您可以將  
PlayStation® 之遊戲資料Memory Card記憶卡SCPH-1020)拷貝  
PlayStation®2Memory Card記憶卡8MB以作為保存之  
用。請注意,您無法直接PlayStation®2Memory Card記憶卡)  
(8MB)載入的遊戲資料。  
保存與載入遊戲資料的方法因遊戲而異細説明參閲該軟件附  
帶的使用説明書。  
拷貝或刪除遊戲資料  
1 進入瀏覽器畫( 第70使用方向按鈕選擇您想  
要執行拷貝或刪除Memory Card記憶卡)之圖示,然  
後按 按鈕。  
2 選擇您想要拷貝或刪除的資料之圖示,然後按 按鈕。  
54  
使Memory Card記憶卡)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CD  
使用方向按鈕,選擇所要曲目的圖示,然後按 按鈕。  
播放音CD  
*)  
功能  
.
m
M
>
N
(L1按鈕)  
(L2鈕)  
(R2鈕)  
(R1鈕)  
進到目前或上一曲目的開頭  
CD  
快退  
1 打開主機並插入光( 第50。  
開始遊戲”的步1至4行操作。  
顯示曲目號碼。  
快進  
CT  
進到下一曲目的開頭  
(START開始) 開始播放  
按鈕)  
2 使用方向按鈕擇您想要播放的曲目號碼後按 按  
鈕。  
播放開始。  
X
x
(START開始) 暫停播放  
按鈕)  
(SELECT選  
擇)按鈕)  
停止播放  
提示  
如果在插入光碟後打開主機電源,則會自動顯示曲目號碼。  
您也可進入瀏覽器畫面,選擇開始播(  
70。  
* 您亦可使用類比控制DUALSHOCK®2)的按鈕直接進行操作。  
提示  
注意  
若要播放以 DTS 格式錄製的音樂 CD,您必須將帶有 DTS 解碼器的設備連  
接至 DIGITAL OUTOPTICAL光纖數碼輸出)端( 第46。  
您也可以使PlayStation®2DVD選購品。  
請注意,如果此設備不具DTS碼器,或者如果連接AV MULTI OUT  
(AV重輸出)端子,則可能發出震耳欲聾的噪音。  
55  
播放音CD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
5 選擇音CD示,然後按 按鈕。  
結束音CD播放  
顯示曲目號碼,設定選項顯示在畫面的左下方。  
1 使用方向按鈕,選x,然後按 按鈕。  
6 選擇想要的曲目,然後按 按鈕。  
播放停止。按主機前面A (打開)按鈕取出光碟。  
播放開始。  
提示  
以各種方式播放  
您也可以通過選擇畫面左上角的音CD示,並按 按鈕,從顯示曲目的  
畫面中進入播放選項畫面。  
您可以設播放模式”重複。  
可以同時設播放模式”重複。  
播放模式  
標準  
編序  
隨機  
CD的錄製順序播放曲目  
以特定的順序播放曲目  
以隨機順序播放曲目  
不反覆播CD  
重複  
全曲  
單曲  
反覆播放全部曲目  
反覆播放一個曲目  
1 進入瀏覽器畫( 第70使用方向按鈕選擇音樂  
CD示,然後按 按鈕。  
顯示播放選項畫面。  
2 播放模式”重複然後按 按鈕。  
3 選擇想要的設定,然後按 按鈕。  
如果選編序則將顯示指定曲目順序的畫面。請選擇您想  
要播放的曲目。  
4 按 按鈕。  
返回瀏覽器畫面。  
56  
播放音CD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
使用控制面板  
DVD  
1 開始播DVD( 第59。  
2 SELECT選擇)按鈕。  
您可以使用以下方法操DVD放機。  
使用畫面上顯示的控制面板  
顯示控制面板。如果再按 SELECT選擇)按鈕,則將改變畫面  
上的顯示位置。  
使用類比控制DUALSHOCK®2)直接操作  
使PlayStation®2DVD選購品)  
CT  
以下説明為假設使用控制面板操作 DVD 播放機。視所使用的方法而  
定,有些操作可能不同。  
提示  
有關播DVD詳細説明,請參DVD帶的説明書。  
PlayStation®2機會依據 DVD 中設定的內容而進行播放DVD設  
定功能可能會出現無法使用的情形,敬請注意。  
3 使用方向按鈕,選擇一個圖示,然後按 按鈕。  
提示  
若要關閉控制面板SELECT(選擇鈕(一次或兩次按 按鈕。  
控制面板項目清單  
您可以選擇控制面板中的以下選項。  
圖示  
功能  
選單  
DVD-Video單  
頂部選單  
返回  
DVD-Video單  
返回DVD單的前一個選擇畫面  
O
57  
DVD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
圖示  
功能  
圖示  
功能  
顯示和變更錄製多種聲音軌語言)  
DVD音設定  
指定播放場景,並從已經設定的場景開  
始播(  
聲音選項  
A-B複播放  
隨機播放  
62)  
顯示和變更錄製多種取景角度DVD的  
角度設定  
以任意順序開始播放標題或(  
62)  
角度選項  
字幕選項  
進入  
以編排好的順序開始播放標題或章  
61)  
顯示和變更錄製字幕DVD的字幕設定  
編序播放  
跳至所選擇的標題、章或指定的時間,  
並開始播(  
選擇重複播放光碟上全部標題,或一個  
標題或一個( 第62)  
59)  
重複播放  
顯示和變更語言、畫質、視聽年齡限制  
等級、聲音等選( 第63)  
設定  
DVD-RWVR請選擇  
原作品或播放目錄内容進行播放  
原作品 / 播放目  
61)  
顯示當前標題或章號碼、已播放時間等  
60)  
時間顯示  
説明  
取消已選擇的數字或播放模式  
63)  
解除  
顯示類比控制DUALSHOCK®2)的按  
鈕功能  
提示  
進入您想要播放的章號(  
頁)  
第 59  
0~9  
進入章  
退/進  
您可以使來確認能使用類比控制器按鈕直接進入的選項。若要使  
用控制器直接進入選項,您必須從畫面中清除控制面板。  
視播放方式而定,有些選項可能無效或無法調節。  
返回/至當前章、上一章或下一章  
的開頭  
./>  
/
/
尋找  
慢放  
播放  
暫停  
停止  
退/進播放畫(  
以慢動作進行播/放  
開始播放  
60)  
N
X
暫停播放  
x
停止播(  
59)  
58  
DVD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
選擇特定場景進行播放  
1 打開主機並插入光( 第50。  
按章號碼選擇場景  
開始遊戲”的步1至4行操作。播放開始。  
1 在播放過程中,選擇控制面板中,需要的章號( 第  
57然後按 按鈕。  
提示  
開始播放所選擇的章。如果要播放單個數字號碼的例如  
1-9需要於輸入章號碼前001。  
如果在插入光碟後打開主機電源,則將自動開始播放。  
您也可以進入瀏覽器畫面,選擇開始播(  
70。  
CT  
按標題號碼、章號碼或按指定的時間選擇場景  
DVDx  
1 在播放過程中擇控制面板的 ( 57後  
按 按鈕。  
1 在播放過程中,選擇控制面板x57然後  
按 按鈕。  
2 選擇一個項目,然後按 按鈕。  
播放停止。按主機前面A (打開)按鈕取出光碟。  
標題  
指定標題號碼  
從停播點恢復播重續播放)  
指定章號碼  
C XX:XX:XX  
T XX:XX:XX)  
指定或標題)的已播放時間  
1 在播放過程中,選擇控制面板x57然後  
按 按鈕。  
2 N,然後按 按鈕。  
3 選擇想要的場景號碼,然後按 按鈕。  
從步1停播點起繼續播放。  
開始播放所選擇的章。  
若要解除重續播放  
在步1,選x,然後按 按鈕。  
59  
DVD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
DVD特定(尋找)  
顯示播放資訊  
您可以向前或向後尋找,從而快速找DVD的特定點。  
畫面上可顯示當前標題號碼或已播放時間等資訊。  
1 在播放過程中,選擇控制面板的 或 57,  
1 在播放時,選擇控制面板的 ( 第 57 頁),然後按  
然後按住 按鈕不放。  
按住 按鈕不放,按方向按鈕之上下,尋找速度將如下所示改  
變。  
按鈕。  
每按一次 按鈕,顯示將如下改變。  
3  
2  
1  
慢放  
標題 X 章 X  
標題號碼和章號碼  
目前章的已播放時間  
目前章的剩餘時間  
目前標題的已播放時間  
目前標題的剩餘時間  
標題 X 章 X C XX:XX:XX  
標題 X 章 X C -XX:XX:XX  
標題 X 章 X T XX:XX:XX  
標題 X 章 X T -XX:XX:XX  
(關)  
2 當到達您所尋找的點,鬆開 按鈕。  
播放返回正常速度。  
提示  
若要在播放過程中使用類比控制器進行尋找L2R2鈕開始尋找。  
並使用方向按鈕改變速度。當到達您所尋找的點,鬆L2R2鈕。  
60  
DVD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
選擇原作品或播放目錄播DVD-RW  
使用播放方式  
當使DVD-RW碟(VR可以選擇您想要播放標題的類  
型。  
使用各種播放方式可選擇您想要的順序播放標題或章重複播  
放指定的場景。有四種播放方式:  
1 在播放停止時,選擇控制面板的  
57,  
然後按 按鈕。  
每按一次 按鈕,將依次選擇原作品和播放目錄。  
編序播(  
隨機播(  
重複播(  
A-B複播(  
61)  
62)  
62)  
CT  
原作品  
按原先錄製的順序播放内容。  
62)  
播放目錄  
播放經編輯的内容。播放目錄為預設設定。  
以下説明為假設使用控制面(  
57)操DVD放裝置。  
提示  
提示  
DVD-RWVR式)時,無法使用反向慢動作播放。  
您可以組合編序播放機播放和重複播放進行播放請注意組合的  
不同,可能會出現無法執行隨機播放或重複播放的情形。  
此功能不能與重續播放一起使用。在選擇此功能之前需要先解除重續播放  
59。  
PlayStation®2機按DVD件中錄製的内容播放光碟。  
編序播放  
您可以創建編序,以任意順序播放標題和章。  
1 在播放過程中擇控制面板的  
57然  
後按 按鈕。  
2 選擇一個編序號碼,然後按 按鈕。  
如果尚未設定編序,則只有一個選1.。  
3 選擇標題號碼,然後按 按鈕。  
61  
使用播放方式  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4 選擇章號碼,然後按 按鈕。  
若要播放全部章,則選全部之前請重複步2至4定  
其他標題或章。  
重複播放  
您可以設定此選項反覆播放標題或章。  
1 選擇控制面板的  
57然後按 按鈕。  
每按一次 按鈕,顯示將如下改變。  
5 START開始)按鈕。  
開始編序播放。  
光碟重複播放  
標題重複播放  
章重複播放  
重複播放全部標題  
重複播放一個標題  
重複播放一個章  
解除重複播放  
提示  
編序播放的設定內容,不會於結果播放後自動解除。  
解除重複播放  
隨機播放  
您可以設定此選項對光碟上錄製的全部標題或章進行任意順序的播  
放。每使用一次隨機播放,播放順序都將不同。  
2 N,然後按 按鈕。  
1 選擇控制面板的  
57然後按 按鈕。  
每按一次 按鈕,顯示將如下改變。  
A-B複播放  
標題隨機播放  
以任意順序播放標題  
以任意順序播放章  
解除隨機播放  
您可以設定特定的場景反覆播放。  
1 在播放過程中擇控制面板的  
章隨機播放  
57後  
在您想要開始重複播放的點按 按鈕。  
設定開始A。  
解除隨機播放  
2 N,然後按 按鈕。  
2 在您想要結束重複播放的點按 按鈕。  
設定結束B並開始重複播A至B分。  
62  
使用播放方式  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
解除播放方式  
調DVD放設定  
解除播放方式以便進行普通播放。  
您可以使用控制面板調DVD放設定字幕語言音語言和視  
聽年齡限制等級。  
1 在控制面板中選擇  
( 第 57 頁然後按 按  
鈕。  
播放模式已被解除”訊息,主機返回至普通播放。  
提示  
提示  
之前所設定的一個或多個播放設定,都將會被一併解除。  
有些DVD不支援全部設定PlayStation®2主機會依據DVD中設定的內容而進  
行播放。如DVD支援所列出的功能,則您將無法變更設定。  
CT  
在進行播放或重續播放時法使用以下選項放或重續播放(  
在變更這些設定之前解除重續播放。  
59  
- 語言設定中選單語言聲音語言”字幕語言”  
- 畫面設定中電視機形式”Progressive逐行掃描)  
- 個人設定中視聽年齡限制”  
- 聲音設定中DTS”聲音軌跡自動選擇模式”  
您可以使用以下過程更DVD放裝置設定:  
1 選擇控制面板的 ( 57然後按 按鈕。  
顯示設定圖示。  
2 選擇您想要更改設定的圖示,然後按 按鈕。  
顯示每個項目的當前設定。  
3 選擇想要的項目,然後按 按鈕。  
選單項目變爲有效,並能被選擇。  
4 選擇想要的設定,然後按 按鈕。  
項目設定完成細説明參見每個項目的説明(  
69。  
64至  
63  
調DVD放設定  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
提示  
設定電視機顯示選項  
每個選單項目的預設設定在以下説明中用底綫表示。  
設定後若要返回控制面板,則SELECT選擇)按鈕。  
當進行以下任何一項操作時,設定將被儲存:  
- 停止播包括停止重續播放)  
在畫面設定選單中,您可以設定螢幕尺縱橫比)和其他影響畫  
質的選項。  
- 關閉光碟蓋  
電視機形式  
您可以設定縱橫比,以符合所連接電視機的螢幕。  
設定語言選項  
16:9  
當使用寬螢幕電視機或具有特定 16:9/ 寬螢幕功能普通  
電視機時選擇此選項。  
語言設定”中,您可以選擇 DVD 選單、聲音和字幕所使用的語  
注意果您選擇DVD未錄製的語言將自動選擇已經  
錄製的一種語言。  
4:3 信箱形式  
4:3 全景掃描  
當使用普通電視機時選擇此選項。此設定顯示寬螢幕影  
像,畫面的上下將會出現黑邊。  
選單語言  
聲音語言  
字幕語言  
DVD單所使用的語言  
DVD音軌跡所使用的語言  
DVD幕所使用的語言  
當使用普通電視機時選擇此選項。此設定顯示的影像被  
調節到螢幕的高度,左右兩邊超出螢幕部分會被切除。  
提示  
如果字幕語言選擇聲音連動則字幕語言將自動設定為與 DVD 聲音軌  
跡所選擇語言一致的語言。  
提示  
當您Progressive逐行掃描)設定電視機形式”自動  
設定16:9。  
64  
調DVD放設定  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
DNRDigital Noise Reduction)  
Progressive逐行掃描)  
您可以使用此設定來幫助減少畫面中的粗糙程度,並產生更清晰的  
影像。  
您可以通過一次刷新所有行顯示影像大多數情況下方法能產  
生更清晰、無閃爍的影像。此功能只有在您的電視機和 AV 連接線 *  
支援逐行掃480p)時才有效。  
* 影像色差連接選購品)與逐行掃描相容。  
不使DNR。  
提高畫質  
DNR1  
DNR2  
當主機連接至支援逐行掃480p)電視機時選擇此選項。  
當主機連接至普通電視機時選擇此選項。  
提高畫最高)  
CT  
提示  
提示  
“DNR2”DNR1”更有效降低影像粗糙程度,但在某些情況下可能會出現  
殘像。如果出現此種情況,請選。  
當主機連接至無必備裝置的電視機時,如果畫質下降或未顯示影像,請將  
“Progressive逐行掃描)設定對於此類電視機,如果您無意  
中將此選項設定則畫質可能下降,或者可能不顯示影像。若要清  
除此設定,請按照以下步驟操作:  
在某DVD,DNR能產生的效果可能有限。  
當您Progressive逐行掃描)設定DNR”將自動關  
閉,且無法打開。  
1
2
確認主機中DVD。  
按主機前面_/1 (啟/備)/RESET再啟動)按鈕。  
然後按住控制器端1類比控制DUALSHOCK®2)START開始)  
按鈕不放,直至顯示 DVD 影像Progressive逐行掃描)設定返回  
“關允許正常顯示 DVD 視頻訊號。您也可以使用版本畫面中的  
輪廓強調  
您可以使畫面影像的輪廓銳利或柔和值越高表輪廓愈鮮明銳  
利。通常選0。  
“Progressive 設定(  
75)取消此設定。  
DVD以包含使用不同幀速率的基於視頻和基於電影的素材。當使用逐行掃  
描播放基於視頻的素材時些影像可能顯得不自然現這種情況時請  
Progressive逐行掃描)設定並以標準隔行模式觀看。  
當您Progressive逐行掃描)設定電視機形式”  
-2  
-1  
0  
+1  
+2  
提示  
DVD定,輪廓強調產生的效果可能有限。  
64)自動設定16:9。  
DVD-RWVR容只能以標準隔行格式觀看播放此類内容時,  
“Progressive逐行掃描)選項無效。  
情報顯示  
在播放過程中,您可以在螢幕的右上角顯示幾秒鐘播放狀態資訊。  
顯示幾秒鐘播放狀態資訊。  
不顯示播放狀態資訊。  
65  
調DVD放設定  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 等級然後按 按鈕。  
設定個人選項  
顯示等級選項一覽表。  
暫停模式  
6 選擇一個限制等級,然後按 按鈕。  
您可以使用此選項設定播放暫停時的影像狀態。  
若要解除視聽年齡限制  
自動  
無抖動顯示含有動態部分的影像。通常選擇此項設定。  
能以高解析度顯示不含動態部分的影像。  
DVD放停止時“設定視聽年齡限制的步6,並將“等  
級”設定。  
視聽年齡限制  
在某些地區看某DVD容可能受到視聽者年齡或其他因素的限  
制。您可利用視聽年齡限制功能來控制主機的視聽等級。  
數值越低,限制越嚴格。  
設定視聽年齡限制  
1 視聽年齡限制然後按 按鈕。  
顯示登錄密碼的畫面。如果已經登錄了密碼,則顯示確認密碼的  
畫面。  
2 選擇一個數字,然後按 按鈕。  
重複步2入一個四位數密碼。如果您想要清除一個數字,則  
按 按鈕。在登錄密碼時,將要求您再次輸入密碼進行確認。  
3 地區然後按 按鈕。  
顯示地區選項一覽表。  
4 選擇一個地區作爲視聽年齡限制等級的標準,然後按  
按鈕。  
如果您選其他地區代碼一覽表(  
第67頁。  
66  
調DVD放設定  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
地區代碼一覽表  
2 選擇一個數字,然後按 按鈕。  
若要輸入視聽年齡限制地區代碼,設定視聽年齡限制”的步驟  
4其他(  
重複步2入一個四位數密碼。要求您再輸入密碼進行確認。  
66使用方向按鈕選擇第一個字母,  
然後按右方向按鈕。選擇下一個字母,然後按 按鈕。  
播放受視聽年齡限制的光碟  
地區  
代碼  
GB  
IT  
ID  
AT  
NL  
CA  
KR  
SG  
CH  
SE  
ES  
TH  
TW  
地區  
代碼  
CN  
DK  
DE  
JP  
NO  
PH  
FI  
FR  
BE  
HK  
MY  
RU  
1 開始播DVD( 第59。  
將提示您是否要臨時變更視聽年齡限制等級,從而能允許播放。  
DVD定,此提示通常在光碟起動時立即出現,但也可能出現  
在其它時間。  
英國  
中國  
義大利  
印度尼西亞  
澳大利亞  
荷蘭  
丹麥  
CT  
德國  
2 使用方向按鈕,選然後按 按鈕。  
日本  
顯示輸入密碼的畫面。  
挪威  
3 選擇一個數字,然後按 按鈕。  
加拿大  
韓國  
菲律賓  
芬蘭  
重複步3入四位數密碼。輸入密碼後,播放將重新開始。當  
DVD放停止時,視聽年齡限制等級將返回至原設定。  
新加坡  
瑞士  
法國  
提示  
比利時  
香港  
如果您忘記密碼,請閱覽快捷參(  
42。  
瑞典  
如果您不設定密碼,則您無法變更視聽年齡限制設定。  
某些帶有視聽年齡限制功能DVD允許您使用播放方(  
。  
6163  
西班牙  
泰國  
馬來西亞  
俄羅斯  
臺灣  
變更密碼  
設定視聽年齡限制”的步2中(  
驟操:  
66完成以下步  
1 使用方向按鈕,選變更密碼然後按 按鈕。  
顯示變更密碼的畫面。  
67  
調DVD放設定  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dolby Digital  
設定聲音選項  
此選項設Dolby DigitalDIGITAL OUTOPTICAL光纖數  
碼輸出)端子的輸出信號。  
聲音數碼輸出  
當主機連接至帶有内Dolby Digital碼器的音響設備時選擇  
此選項。  
當您將下列音響裝置連接至 DIGITAL OUTOPTICAL光纖數碼輸  
出)端子時,您可以切換輸出聲音信號的方法。  
當主機連接至沒有内Dolby Digital碼器的音響設備時選擇  
此選項。  
注意  
當主機連接至Dolby DigitalDTSMPEG碼器的音響裝置時將  
“Dolby DigitalDTS”MPEG”設定如果您在沒有必  
要的解碼器的情況下將這些選項設定為“開可能沒有聲音或可能發  
出非常響的噪音。  
DTS  
此選項設定 DTS 作爲 DIGITAL OUTOPTICAL光纖數碼輸出)端  
子的輸出信號。  
DIGITAL OUT (OPTICAL) (纖數碼輸)  
當主機連接至帶有内DTS碼器的音響設備時選擇此選項。  
當主機連接至沒有内DTS碼器的音響設備時選擇此選項。  
此選項設定 DIGITAL OUTOPTICAL光纖數碼輸出)端子的輸出  
類型。  
MPEG  
當您想要聲音頻信號)透DIGITAL OUTOPTICAL光纖  
數碼輸出)端子輸出時選擇此選項。  
此選項設MPEG AUDIODIGITAL OUT(OPTICAL光纖數碼輸  
出)端子的輸出信號。  
Dolby DigitalDTS”MPEG”設定。  
當您不想讓聲音頻信號)透DIGITAL OUTOPTICAL光  
纖數碼輸出)端子輸出時選擇此選項。  
當主機連接至帶有内MPEG碼器的音響設備時選擇此選項。  
當主機連接至沒有内MPEG碼器的音響設備時選擇此選項。  
不顯Dolby DigitalDTS”MPEG”設定。  
68  
調DVD放設定  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
聲音軌跡自動選擇模式  
當您播放錄製了多種音頻格式(PCMDolby DigitalDTSMPEG)  
DVD設定把優先權給予含有聲道數量最多的音頻軌跡果  
PCM、Dolby Digital、DTS MPEG 具有相同數量的聲道,則主機將  
PCM、Dolby Digital、DTSMPEG頻軌跡順序進行選擇。  
優先選擇  
不需優先選擇  
CT  
提示  
如果聲音數碼輸出”中DTS”設定(  
DTS頻軌跡。  
68)則不播  
DVD有優先權的音頻聲道可能被預先確定此情況下按照  
DVD優先順序選擇音頻軌跡。  
DVD量  
如果 DVD 的音頻輸出音量較低,則您可以設定此選項。只有聲  
音數碼輸出”DIGITAL OUTOPTICAL光纖數碼輸出)設定  
(  
68)時,您才可以設定此選項。  
調高音最高)  
調高音量  
通常選擇此選項。  
+2  
+1  
標準  
注意  
如果您將此選項設定+1”+2”,則聲音可能失真。如果發生此  
情況,請將設定變更標準另外請注意,如果您將音量設定過高,  
則可能會傷害您的聽力或損壞揚聲器。  
69  
調DVD放設定  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
主選單  
瀏覽器畫面  
顯示主選單  
您可以從瀏覽器畫面進行下列操作:  
拷貝或刪Memory Card記憶卡)中儲存的遊戲資料  
開始遊戲  
您可以從主選單訪問資訊和變更各種設定。您可以從主選單進入以  
下畫面。當打開主機而不插入光碟時將顯示主選單。  
瀏覽器畫(  
70)  
71)  
開始播放音CD  
DVD放  
系統設定選(  
版本畫(  
74)  
1 顯示主選( 第70。  
1 打開主( 第48。  
顯示主選單。請注意,顯示主選單可能需要一些時間。  
2 使用方向按鈕,選瀏覽器然後按 按鈕。  
顯示瀏覽器畫面。  
3 插入光碟Memory Card記憶卡。  
瀏覽器畫面中顯示所插入對象的圖示。  
\
提示  
如果打開插有光碟的主機,則將不顯示主選單。若要顯示主選單,則按主機  
前面A(打開)按鈕將光碟取出。然後_/1 (啓/備)/RESET再  
啟動)按鈕重新啟動主機。  
70  
顯示主選單  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
4 選擇一個圖示,然後按 按鈕。  
當您選Memory Card(記憶卡示時Memory Card  
(記憶卡儲存的資料圖示要拷貝或刪除遊戲儲存資料,  
使用系統設定選單  
請參拷貝或刪除遊戲資料(  
54。  
您可以從系統設定選單變更許多選項的設定括語言或時間顯示,  
以及音頻或視頻的輸出方法。  
如果選PlayStation®2PlayStation® 規格之軟件光碟則  
遊戲將開始。  
當您選擇音CD碟圖示將顯CD所包含的曲目參  
1 顯示主選( 第70。  
播放音CD(  
55。  
如果您選DVD碟圖示,則將開始播DVD。  
CT  
2 使用方向按鈕,選系統設定然後按 按鈕。  
顯示系統設定選單。  
提示  
當主機中未插Memory Card(記憶卡光碟瀏覽器畫面中將顯示“找  
不到資料”信息。  
3 選擇一個項目,然後按 按鈕。  
選單項目變爲有效,並能被選擇。  
4 選擇想要的設定,然後按 按鈕。  
詳細説明,請參見每個選單項目的説(  
7273。  
提示  
每個選單項目的預設設定在以下説明中用底綫表示。  
對每項設定的變更將被儲存,即使關閉主機或重新啟動主機,設定仍保持有  
效。  
71  
使用系統設定選單  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
調整時鐘  
螢幕尺寸  
您可以設定日期和時間。使用方向按鈕設、  
“小時分鐘”當您按 按鈕時,設定生效。  
您可以設定電視機的顯示方式。  
4:3  
當主機配合普通電視機使用時選擇此選項。  
可選設定  
全畫*  
當主機配合普通電視機使用時選擇此選項。螢幕上  
部和下部的黑邊被切除。  
如果您調整時鐘”畫面時按 按鈕,則您可以設日期顯示  
方式”時間顯示方式”等選項。使用方向按鈕和 按鈕進行每  
項設定。  
16:9  
當使用寬螢幕電視機或具有特定 16:9/ 寬螢幕功能  
普通電視機時選擇此選項。  
時間顯示方式  
日期顯示方式  
時區  
將系統時鐘設定為12小時或24小時時鐘顯示方式。  
設定年、月和日的顯示順序。  
* “全畫面”顯示方式與系統設定選單、瀏覽器畫面和音CD面相容。  
設定時區設定。  
DIGITAL OUT (OPTICAL)光纖數碼輸出)  
設定夏令時間  
設定標準或夏令時間。通常選標準時閒。  
您可以設定是否透過 DIGITAL OUTOPTICAL光纖數碼輸出)端  
子輸出信號。  
當您想要透DIGITAL OUTOPTICAL光纖數碼  
輸出)端子輸出聲音頻信號)時選擇此選項。  
當您不想透DIGITAL OUTOPTICAL光纖數碼  
輸出)端子輸出聲音頻信號)時選擇此選項。  
72  
使用系統設定選單  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
影像色差輸出  
顯示語言  
當使用影像色差連接選購品)時,您必須設定方式以適合電視  
機上的輸入插孔。  
您可以使用此選項選擇主選單覽器畫面統設定選單和版本資  
訊畫面上顯示的語言。  
Y Cb/Pb Cr/Pr  
RGB  
當主機連接至影像色差輸入端子時選擇此項。  
當主機連接RGB入端子時選擇此項。  
繁體中文  
英文  
以繁體中文顯示信SCPH-90007預設設定)  
以英文顯示信SCPH-90006預設設定)  
提示  
CT  
“RGB”設定僅適合 PlayStation®2 和 PlayStation® 規格之軟件。當您觀看  
DVD,方式自動切換Y Cb/Pb Cr/Pr。  
遙控器  
當使PlayStation®2DVD選購品)時選擇此選項。  
遊戲操作功能 開  
遊戲操作功能 關  
DVD控器操PlayStation®2或  
PlayStation® 規格之軟件時選擇此選項。  
當不使DVD控器操PlayStation®2或  
PlayStation® 規格之軟件時選擇此選項。  
提示  
當此選項設定遊戲操作功能 開”使DVD控器時,將套用以下限制:  
視軟件而定,某些遙控按鈕可能無法正常工作。  
當同時按兩個或多個按鈕時,DVD控器的按鈕將不起作用。  
當從控制器端1掉控制器時些軟件標題可能停止正常運作出現  
這種情況,請設定遊戲操作功能 關。  
73  
使用系統設定選單  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3 選擇想要的設定,然後按 按鈕。  
詳細説明,請參見每個項目的説(  
7476。  
版本資訊畫面  
提示  
每個選單項目的預設設定在以下説明中用底綫表示。  
通過選擇此選項可以確認各主機部件的版本資訊也可以變更  
某些項目的可選設定。  
1 在主選( 第70)畫面上按 按鈕。  
主機  
顯示版本資訊畫面。  
PlayStation®2 主機自動調節其進行最佳播放的内部設定。自  
動診斷”設定開”時,主機將進行附加調整。  
自動診斷  
自動診斷被關閉。  
自動診斷開啓。  
提示  
在下列情況下自動診斷”設定將自動返回預設設定:  
當開始播PlayStation®2PlayStation® 規格之軟件DVD時  
主機重新啟動時  
可選設定  
主機關閉時  
可選設定可用主機PlayStation® 驅動程式”DVD 播  
放裝置只有當 DVD 播放裝置Progressive逐行掃描)選  
像設定開”時,才能設DVD放裝置。  
1 使用方向按鈕,選擇一個項目,然後按 按鈕。  
顯示此項目的當前設定。  
2 選擇一個項目,然後按 按鈕。  
顯示有效選項。  
74  
版本資訊畫面  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
PlayStation® 驅動程式  
DVD放裝置  
您可以將 PlayStation® 驅動程式設定至 PlayStation® 規格之軟件  
的最佳性能。  
當主機連接至無必要裝置的電視機時果您Progressive逐  
行掃描)設定“開畫質可能將低,或可能不顯示影像。您可以  
通過以下過程解Progressive逐行掃描)設定。  
解除設定前取DVD。  
提示  
在下列情況下,此設定將自動返回預設設定:  
主機關閉時  
Progressive定  
光碟讀取速度  
CT  
不解除  
解除  
Progressive逐行掃描)設定開啓  
Progressive逐行掃描)設定  
標準  
高速  
以正常速度載入光碟  
以高速度載入光碟  
1 顯示版本資訊畫面。  
提示  
在下列情況中設定標準:  
當高速載入未產生更好的效果時  
當使用與高速載入不相容的軟件時  
2 使用方向按鈕,選DVD放裝置然後按 按鈕。  
Progressive 設定”選項。  
3 按 按鈕。  
材質貼圖  
4 解除然後按 按鈕。  
標準  
正常顯示  
平滑補正 以降低畫面顯示影像的銳利度顯示  
5 按兩次 按鈕。  
顯示返回主選單。  
提示  
在下列情況中設定標準:  
6 按主機前面A (打開)按鈕,然後DVD入主機。  
當平滑補正材質貼圖未產生更好的效果時  
當設定平滑補正”時,如果未正確顯示影像  
7 關閉光碟蓋。  
播放開始。  
75  
版本資訊畫面  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
提示  
在以下情況中,設定將不解除:1)步4不開始播DVD,2)步6前  
您重新啟動或關閉主機。  
76  
版本資訊畫面  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
網路  
用乙太網路連接線連接  
您可以使用連接在主機背NETWORK(網路口上的乙太網路連接  
主機連接至網路可以連接100 Base-TX10 Base-T網  
路。詳細説明,請參閲網路設備附帶的使用説明書。  
連接網路  
通過將 PlayStation®2 主機連接至網路,您可以享受到線上遊戲的  
樂趣。若要玩線上遊戲,則您需要以下條件:  
網路相PlayStation®2戲  
基本網路設定  
網路綫  
網路綫視您家中寬帶服務的類型而  
不同。  
網路裝置  
所使用裝置的類型也視服務的類型  
而不同。  
寬頻上網服務  
CT  
市售的乙太網路連接線  
PlayStation®2Memory Card記憶卡8MB選購品)  
提示  
在本主機上使用撥號ISDN接,您無法玩線上遊戲。  
有兩種類型的乙太網路連接線:直通連接電纜和交叉連接電纜。詳細説明,  
請參閲網路設備附帶的使用説明書。  
DSL據機等  
市售乙太網路連接線  
MEMORY CARD  
MEMORY CARD  
電腦  
提示  
當主機和電腦連接至網路時能需要路由器或集線器等設備細説明請  
參閲網路設備附帶的使用説明書。  
77  
連接網路  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
連接主機  
警告  
新建網路設定  
在完成所有其它連接之前,切勿將主機交流電源線插頭插入電源插座。  
在將乙太網路連接線連接至主機後將需要創建並儲存網路設定。  
實際的網路設定可能視正在玩的線上遊戲而變化細説明參閲  
該軟件附帶的使用説明書。  
1 將乙太網路連接線連接至主機背面NETWORK網路)接  
口。  
主機背面  
所需物件  
若要創建網路設定,您將需要以下物件:  
PlayStation®2Memory Card記憶卡8MB選購品)  
由網際網路服務供應商提供的登入和網路設定資訊  
提示  
視您所使用的網際網路服務類型而定,您可能需要提供您的 MAC 位址。您可  
以在版本資訊畫面中找到您主機MAC(  
市售的乙太網路連接線  
74。  
2 將乙太網路連接線上的端子插入網路設備。  
連接方法視網路設備而異。詳細説明,請參閲網路設備附帶的使  
用説明書。  
警告  
切勿將以下類型的乙太網路連接線或電話線連接至網路端子;可能有太  
大的電流通過連接端子,從而引起故障,連接端子内過熱或起火。  
- 不適合10Base-T/100Base-TX路一起使用的乙太網路連接線  
- 標準住宅電話線  
- ISDN數碼)相容電話或資料線  
- PBX話線  
- 不明”類型的電話線  
78  
新建網路設定  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
附屬品  
其他資訊  
請參閱快捷參(  
42。  
規格  
關於國家出口控制  
本產品可能因各國立法之規定而被列為限制出口商品。請嚴格遵守  
相關法條及任何與本產品之管轄權有關之法律規定。  
本公司保留在不予通知情況下,變更設定或規格之權利。  
關於存取控制  
一般規格  
本產品並入了存取控制技術。對於使用非專為本產品設計的軟件  
(DVD-VideoCD使用本產品專用軟件的拷貝版將受到  
存取控制技術的阻止經許可的傳遞口或  
程式備的傳輸用程式或設備修改本產品廢除存取控制功  
能的作用將受到或可能受到法律的禁止。  
CT  
電源要求  
AC220-240V 50Hz (SCPH-90006)  
AC110V 50/60Hz (SCPH-90007)  
耗電大約)  
35 W  
主機尺大約)  
230 × 28 × 152 mm/9 × 1 × 6 in  
/高/)  
主機質大約)  
信號格式  
720 g  
NTSC  
操作溫度  
5° C 35° C /41° F 95° F  
主機前面的輸/出  
控制器端2)  
MEMORY CARD記憶卡)插2)  
USB2)  
主機背面的輸/出  
NETWORK網路)接口  
交流電源輸入端子  
AV MULTI OUTAV重輸出)端子  
DIGITAL OUTOPTICAL光纖數碼輸出)  
端子  
79  
規格  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
"
", "PlayStation", "  
"SONY" and " " are registered trademarks and "MagicGate" is a trademark of Sony Corporation.  
”、PlayStation、“ ”、DUALSHOCK” Sony Computer Entertainment Inc.註冊商標。  
", "DUALSHOCK" and "  
" are registered trademarks of Sony Computer Entertainment Inc.  
“SONY”Sony Corporation註冊商標MagicGate”亦為該公司之商標。  
© 2007 Sony Computer Entertainment Inc. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharper Image Dehumidifier IB EVHD10 User Manual
Singer Sewing Machine 107W17 User Manual
Sony Camera Lens SAL24F20Z User Manual
Sony Cordless Telephone SPP A985 User Manual
Sony Personal Computer PCV 7776 User Manual
Sony Portable Radio ICF M60LRDS User Manual
Sony Speaker XS V1330A User Manual
Sony Stereo Receiver STR DN1010 User Manual
Sony Switch DVS 9000 C User Manual
Sony TV Mount KDP 65WS550 User Manual