3-868-352-E1 (1)
Video Cassette
Recorder
Operating Instructions
PAL SECAM NTSC4.43
SLV-SE600B
SLV-SE700B
SLV-SX700B
SLV-SE800B
© 2000 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
4 Step 1 : Unpacking
5 Step 2 : Setting up the remote commander
9 Step 3 : Connecting the VCR
16 Step 5 : Setting up the VCR with the Auto Set Up function
18 Selecting a language
20 Presetting channels
25 Changing/disabling programme positions
31 Setting the clock
36 Setting the Canal Plus decoder
72 Searching using the Acces Smart
function
41 Playing a tape
44 Recording TV programmes
48 Recording TV programmes using the
Dial Timer
75 Searching using the index function
76 Adjusting the picture
78 Changing menu options
(SLV-SE800B only)
53 Recording TV programmes using the
ShowView system
(not available on SLV-SE600B)
57 Setting the timer manually
81 Connecting to a VCR or stereo
system
83 Basic editing
84 Audio dubbing
(SLV-SE800B only)
61 Playing/searching at various speeds
64 Setting the recording duration time
65 Synchronized Recording
(SLV-SE800B only)
68 Checking/changing/cancelling timer
86 Troubleshooting
90 Specifications
91 Index to parts and controls
Back Cover
settings
70 Recording stereo and bilingual
Index
programmes
Table of contents 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1 : Unpacking
Check that you have received the following items with the VCR:
• Remote commander
• Aerial cable
• R6 (size AA) batteries
Check your model name
The instructions in this manual are for the 4 models: SLV-SE600B, SE700B, SX700B,
SE800B. Check your model number by looking at the rear panel of your VCR.
SLV-SE800B is the model used for illustration purposes. Any difference in operation is
clearly indicated in the text, for example, “SLV-SE700B only.”
4
Unpacking
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 : Setting up the remote commander
Inserting the batteries
Insert two R6 (size AA) batteries
by matching the + and – on the
batteries to the diagram inside the
battery compartment.
Insert the negative (–) end first,
then push in and down until the
positive (+) end clicks into
position.
Using the remote
commander
You can use this remote
commander to operate this VCR
Remote sensor
and a Sony TV. Buttons on the
remote commander marked with a
dot (•) can be used to operate your
Sony TV. If the TV does not have
the
symbol near the remote
sensor, this remote commander
will not operate the TV.
[TV] /
[MAGN]
1
4
7
2
5
8
0
3
6
9
To operate
the VCR
Set [TV] / [MAGN] to
[MAGN] and point at the remote sensor at the VCR
a Sony TV
[TV] and point at the remote sensor at the TV
continued
Setting up the remote commander 5
Download from Www.Somanuals.com. All Manuals Search And Download.
?/1
WIDE
/
a
CHOIX SON
FASTEXT buttons
AFFICH
t TV/MAGN
1
4
7
2
5
8
0
3
6
9
Programme
number
buttons
-
CHAINE +/–/
c/C
2 +/–
TV control buttons
To
Press
Set the TV to standby mode
Select an input source: aerial in or line in
Select the TV’s programme position
?/1
t TV/MAGN
Programme number buttons, -,
CHAINE +/–
6
Setting up the remote commander
Download from Www.Somanuals.com. All Manuals Search And Download.
To
Press
Adjust the volume of the TV
Switch to TV (Teletext off)*
Switch to Teletext*
Select the sound
2 +/–
a (TV)
/ (Teletext)
CHOIX SON
FASTEXT buttons
Use FASTEXT*
Call up the on-screen display
AFFICH
Change the Teletext page*
c/C
Switch to/from wide mode of a Sony wide TV (For other WIDE
manufactures’ wide TVs, see “Controlling other TVs with
below.)
Notes
•
•
With normal use, the batteries should last about three to six months.
If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
•
•
•
Do not use a new battery together with an old one.
Do not use different types of batteries together.
Some buttons may not work with certain Sony TVs.
* not available on SLV-SE600B
Controlling other TVs with the remote commander
(not available on SLV-SE600B)
The remote commander is preprogrammed to control non-Sony TVs. If your TV is
listed in the following table, set the appropriate manufacturer’s code number.
Set [TV] / [MAGN] at the top of the remote commander to [TV].
1
Hold down ?/1, and enter your TV’s code number using the programme number
2 buttons. Then release ?/1.
Now you can use the following TV control buttons to control your TV:
?/1, t TV/MAGN, programme number buttons, - (ten’s digit), CHAINE +/–,
2 +/–, a (TV), / (Teletext), FASTEXT buttons, WIDE*, MENU*, M/m/</
,*, and OK*.
* These buttons may not work with all TVs.
continued
Setting up the remote commander 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find
the one that works with your TV.
To switch to wide mode, see the footnotes below this table for the applicable code
numbers.
Manufacturer
Sony
Code number
Manufacturer
Panasonic
Philips
Code number
01*1, 02
17*1, 49
06*1, 07*1, 08*1
Akai
68
Ferguson
Grundig
Hitachi
JVC
52
Saba
12, 13
22, 23
25
10*1, 11*1
Samsung
Sanyo
24
33
Sharp
29
Loewe
Mivar
45
Telefunken
Thomson
Toshiba
36
43*2
38
09, 70
NEC
66
15, 16, 69*3
Nokia
*1 Press WIDE to switch the wide picture mode on or off.
*2 Press WIDE, then press 2 +/– to select the wide picture mode you want.
*3 Press WIDE. The menu appears on the TV screen. Then, press M/m/</, to select the
wide picture you want and press OK.
Tip
•
To see if you set your TV’s code number correctly, try turning your TV on and off with the
?/1 button.
Notes
•
•
If you enter a new code number, the code number previously entered will be erased.
If the TV uses a different remote control system from the one programmed to work with the
VCR, you cannot control your TV with the remote commander.
•
When you replace the batteries of the remote commander, the code number may change. Set
the appropriate code number every time you replace the batteries.
8
Setting up the remote commander
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 : Connecting the VCR
If your TV does not have a PERITEL connector
ANTENNE ENTREE
ANTENNE
SORTIE
Mains lead
to mains
ANTENNE
ENTREE
Aerial cable (supplied)
: Signal flow
Disconnect the aerial cable from your
TV and connect it to ANTENNE
ENTREE on the rear panel of the
VCR.
AERIAL
ANTENNE
1
2
IN
ENTREE
OUT
SORTIE
Connect ANTENNE SORTIE of the
VCR and the aerial input of your TV
using the supplied aerial cable.
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
Connect the mains lead to the mains.
3
Note
•
When you connect the VCR and your TV only with an aerial cable, you have to tune your TV
continued
Connecting the VCR 9
Download from Www.Somanuals.com. All Manuals Search And Download.
If your TV has a PERITEL connector
ANTENNE ENTREE
i LIGNE-1
(TV)
ANTENNE SORTIE
Mains lead
to mains
ANTENNE
ENTREE
Aerial cable (supplied)
PERITEL
: Signal flow
PERITEL cable (not supplied)
Disconnect the aerial cable from your
TV and connect it to ANTENNE
ENTREE on the rear panel of the
VCR.
AERIAL
ANTENNE
1
2
IN
ENTREE
OUT
SORTIE
AERIAL
Connect ANTTENNE SORTIE of the
VCR and the aerial input of your TV
using the supplied aerial cable.
ANTENNE
IN
ENTREE
OUT
SORTIE
Connect LIGNE-1 (TV) on the VCR
and the PERITEL connector on the
TV with the optional PERITEL cable.
3
4
This connection improves picture and
sound quality. Whenever you want to
watch the VCR picture, press t TV/
MAGN to display the MAGN
indicator in the display window.
Connect the mains lead to the mains.
Note
•
If the TV is connected to the LIGNE-1 (TV) connector, setting the RF channel to OFF is
recommended. In the OFF position, only the signal from the aerial is output through the
10 Connecting the VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
About the SMARTLINK features
(not available on SLV-SE600B)
If the connected TV complies with
SMARTLINK, MEGALOGIC*1,
EASYLINK*2, Q-Link*3, EURO VIEW
LINK*4, or T-V LINK*5, this VCR
automatically runs the SMARTLINK
SMARTLINK
function after you complete the steps on the previous page (the SMARTLINK
indicator appears in the VCR’s display window when you turn on the TV). You can
enjoy the following SMARTLINK features.
• Preset Download
You can download your TV tuner preset data to this VCR and tune the VCR
according to that data in Auto Set Up. This greatly simplifies the Auto Set Up
procedure. Be careful not to disconnect the cables or exit the Auto Set Up function
during the procedure.
• TV Direct Rec
• One Touch Play
With One Touch Play, you can start playback automatically without turning on the
• One Touch Menu
You can turn on the VCR and TV, set the TV to the video channel, and display the
VCR’s on-screen display automatically by pressing MENU on the remote
commander.
• One Touch Timer
You can turn on the VCR and TV, set the TV to the video channel, and display the
timer recording menu (the METHODE DE PROGRAMMATION menu, the
MINUTERIE menu, or the SHOWVIEW menu) automatically by pressing
MINUTERIE on the remote commander.
You can set which timer recording menu is displayed using OPTIONS
• Automatic Power Off
You can have the VCR turn off automatically, if the VCR is not used after you turn
off the TV.
*1 “MEGALOGIC” is a registered trademark of Grundig Corporation.
*2 “EASYLINK” is a trademark of Philips Corporation.
3
* “Q-Link” is a trademark of Panasonic Corporation.
4
* “EURO VIEW LINK” is a trademark of Toshiba Corporation.
5
* “T-V LINK” is a trademark of JVC Corporation.
Note
•
Not all TVs respond to the functions above.
continued
Connecting the VCR 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional connections
To a stereo system
(not available on
SLV-SE600B)
SORTIE
AUDIO D/G
You can improve sound quality
by connecting a stereo system to
the SORTIE AUDIO R/L jacks
as shown on the right.
ENTREE
LIGNE
Audio cable (not supplied)
: Signal flow
To a satellite or digital tuner
with Line Through
Using the Line Through
function, you can watch
DECODEUR/
SORTIE
LIGNE
t ENTREE
LIGNE-3*1 or
DECODEUR/
t ENTREE
LIGNE-2*2
programmes from a satellite or
digital tuner connected to this
VCR on the TV even when the
VCR is turned off. When you
turn on the satellite or digital
tuner, this VCR automatically
sends the signal from the
PERITEL cable (not supplied)
: Signal flow
satellite or digital tuner to the
TV without turning itself on.
Connect the satellite or digital tuner to the DECODEUR/ENTREE LIGNE-3*1
1 (or DECODEUR/ENTREE LIGNE-2*2) connector as shown above.
Set DECODEUR/ENTREE LIGNE-3*1 (or DECODEUR/ENTREE LIGNE-2*2)
2 to LIGNE3*1 (or LIGNE2*2) in the OPTIONS-2 menu.
Set VEILLE ECO to NON in the OPTIONS-2 menu.
3
4
Turn off the VCR.
To watch a programme, turn on the satellite or digital tuner and the TV.
Note
•
You cannot watch programmes on the TV while recording unless you are recording a satellite
or digital programme.
*1 SLV-SE800B only
*2 SLV-SE600B, SE700B, and SX700B only
12 Connecting the VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4 : Tuning your TV to the VCR
If your TV does not have a PERITEL connector
Follow the steps below so that your TV will properly receive the video signals from
your VCR.
REGL CANAL
?/1 MARCHE/VEILLE
CHAINE +/–
Press ?/1 MARCHE/VEILLE to turn on the VCR.
MARCHE/VEILLE
1
2
Press REGL CANAL on the VCR lightly.
REGLAGE
AUTO
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
REGL CANAL
Turn on your TV and select a programme position for the VCR picture.
This programme position will now be referred to as the video channel.
3
4
Press REGL CANAL.
REGLAGE
AUTO
The TV system appears in the display window.
REGL CANAL
continued
Tuning your TV to the VCR 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CHAINE +/– (repeatedly) to select the appropriate TV system for
your area.
CHAINE
5
6
Select “L” for the L TV system (SECAM), or “G” for the B/G TV system
(PAL).
ALIGNEMENT
Tune the TV to the same channel shown in
the VCR display window so that the
picture on the right appears clearly on the
MAGNETOSCOPE SONY
TV screen.
Refer to your TV manual for TV tuning
instructions.
If you select the wrong TV system in step
5, the picture on the right may not appear.
Select the appropriate TV system and tune
the TV again.
If the picture does not appear clearly, see
REGLAGE
AUTO
Press REGL CANAL.
7
You have now tuned your TV to the VCR. Whenever you want to play a
tape, set the TV to the video channel.
REGL CANAL
To check to see if the TV tuning is correct
Set the TV to the video channel and press CHAINE +/– on the VCR. If the TV
screen changes to a different programme each time you press CHAINE +/–, the TV
tuning is correct.
To obtain a clear picture from the VCR
If the screen does not appear clearly in step 6 above, go to step 7 to finish this
procedure once. Then start again from step 2. After pressing REGL CANAL in step
2, press CHAINE +/– while the RF channel is displayed, so that another RF channel
appears. Then tune the TV to the new RF channel so that a clear picture appears.
14 Tuning your TV to the VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
If your TV has a PERITEL connector
REGL CANAL
?/1 MARCHE/VEILLE
CHAINE +/–
Press ?/1 MARCHE/VEILLE to turn on the VCR.
MARCHE/VEILLE
1
2
REGLAGE
AUTO
Press REGL CANAL on the VCR lightly.
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
REGL CANAL
CHAINE
Press CHAINE +/– to set the RF channel to OFF, and press REGL CANAL
again.
3
ALIGNEMENT
REGLAGE
AUTO
RF channel set up is complete.
REGL CANAL
Tuning your TV to the VCR 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set Up
function. With this function, you can set the TV channels, guide channels for the
ShowView system*, and VCR clock* automatically.
REGLAGE AUTO
REGLAGE
AUTO
Hold down REGLAGE AUTO on the VCR for more than three seconds.
The VCR automatically turns on, starts searching for all of the receivable
channels, and presets them in the appropriate order for your local area
REGL CANAL
(according to the TV system you selected in “Tuning your TV to the
VCR”).
If you want to change the order of the channels or disable unwanted
If you use the SMARTLINK connection (not available on SLV-SE600B),
the Preset Download function starts and the SMARTLINK indicator flashes
in the display window during download.
After the search or download is complete, the current time appears in the
display window for any stations that transmit a time signal (not available on
31).
16 Setting up the VCR with the Auto Set Up function
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the Auto Set Up function
Press REGLAGE AUTO.
Tip
•
If you want to change the language for the on-screen display from the one preset in the Auto
Set Up function, see page 18.
Notes
•
•
Do not cancel the Auto Set Up function. If you do, repeat the steps above.
The Auto Set Up function may require a long time to complete (approximately 15 to 18
minutes).
•
Whenever you operate the Auto Set Up function, some of the settings (ShowView*, timer,
etc.) will be reset. If this happens, you have to set them again.
* not available on SLV-SE600B
Setting up the VCR with the Auto Set Up function 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a language
If you prefer an on-screen language other
than French, use the on-screen display to
select another language.
0
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
MENU
M/m
OK
Press MENU, then press M/m to highlight
REGLAGES and press OK.
MENU
1
2
REGLAGES
REGLAGE DES CHAINES
HORLOGE
LANGUE
RETOUR
LECTURE
OK
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight LANGUE, then
press OK.
LANGUE
LECTURE
OK
ENGLISH
FRANÇAIS
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
18 Selecting a language
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to highlight the desired language, then press OK.
3
4
LECTURE
OK
Press MENU to exit the menu.
MENU
Tip
•
If you want to return to the previous menu, highlight RETOUR and press OK.
Note
The menu disappears automatically if you don’t proceed for more than a few minutes.
•
Selecting a language 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting channels
If some channels could not be preset using
the Auto Set Up function, you can preset
them manually.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
1
4
7
2
5
8
0
3
6
9
Programme
number
buttons
CHAINE +/–
MENU
M/m/</,
OK
Press MENU, then press M/m to highlight
REGLAGES and press OK.
MENU
1
REGLAGES
REGLAGE DES CHAINES
HORLOGE
LANGUE
RETOUR
LECTURE
OK
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
20 Presetting channels
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to highlight REGLAGE DES
CHAINES, then press OK.
2
3
4
5
6
REGLAGE DES CHAINES
PROG.
1
LECTURE
OK
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
1 2 AAB
C
NON
OUI
ACCORD FIN
RETOUR
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight NORME, then
press OK.
REGLAGE DES CHAINES
PROG.
1
LECTURE
OK
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
B / G
NON
OUI
ACCORD FIN
RETOUR
SELECTIONNER
CONFIRMER
:
: OK
SORTIE : MENU
Press M/m to highlight L or B/G, then
press OK.
REGLAGE DES CHAINES
PROG.
1
LECTURE
OK
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
1 2 AAB
• To receive broadcasts in France,
highlight L.
• To receive broadcasts using the PAL
system (for example, in Germany or
Switzerland), highlight B/G.
C
NON
OUI
ACCORD FIN
RETOUR
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight NORMAL/
CABLE, then press OK.
REGLAGE DES CHAINES
PROG.
1
LECTURE
OK
NORME
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
CABLE
OUI
ACCORD FIN
RETOUR
SELECTIONNER
CONFIRMER
:
: OK
SORTIE : MENU
Press M/m to highlight NORMAL, then
press OK.
REGLAGE DES CHAINES
PROG.
1
LECTURE
OK
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
1 2 AAB
To preset CATV (Cable Television)
channels, select CABLE.
C
NON
OUI
ACCORD FIN
RETOUR
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
continued
Presetting channels 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CHAINE +/– to select the
programme position.
• CHAINE
Selected programme
position
7
REGLAGE DES CHAINES
PROG.
4
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
1 2 AAB
C
NON
OUI
ACCORD FIN
RETOUR
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight REGLAGE
CANAL, then press OK.
8
9
REGLAGE DES CHAINES
PROG.
AAB
4
LECTURE
OK
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
C
1 2
OUI
ACCORD FIN
RETOUR
SELECTIONNER
CONFIRMER
:
: OK
SORTIE : MENU
Press M/m repeatedly until the channel you want is displayed.
The channels appear in the following
order:
LECTURE
OK
REGLAGE DES CHAINES
PROG.
4
NORME
L
NORMAL / CABLE
REGLAGE CANAL
C
2 7
Channel
coverage
System L System B/G
TV-PAYANTE / CANAL+
AFT
ACCORD FIN
RETOUR
OUI
1
2
5
8
0
3
4
7
6
9
VHF
F2 - F10
E2 - E12
Italian channels
A - H
SELECTIONNER
CONFIRMER
:
: OK
SORTIE : MENU
UHF
F21 - F69
B - Q
E21 - E69
CATV (TV
distribution)
S01 - S05,
S1 - S20
HYPER
S21 - S41
S21 - S41
If you know the number of the channel you want, press the programme
number buttons. For example, for channel 5, first press “0” and then press
“5.”
To preset another programme position, repeat steps 7 through 9.
Press MENU to exit the menu.
10
11
MENU
22 Presetting channels
Download from Www.Somanuals.com. All Manuals Search And Download.
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels
clearly. However, if the picture is not clear, you may also use the manual tuning
function.
Press CHAINE +/– or the programme number buttons to select the programme
1 position for which you cannot obtain a clear picture.
Press MENU, then select REGLAGES and press OK.
2
3
4
Select REGLAGE DES CHAINES, then press OK.
Select ACCORD FIN, then press OK.
The fine tuning meter appears.
REGLAGE DES CHAINES
PROG.
4
Selected programme
position
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
2 7
NON
C
ACCORD FIN
RETOUR
REGLER
:
SORTIE : MENU
Press </, to get a clearer picture, then press MENU to exit the menu.
5
Note that the AFT (Auto Fine Tuning) setting switches to NON.
continued
Presetting channels 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning the French CATV channels
This VCR can scan the CATV channels B to Q and the HYPER frequency channels
S21 to S41. On the REGLAGE DES CHAINES menu, the channels are indicated by
S01 to S44 REGLAGE CANAL numbers respectively. For example, channel B is
indicated by REGLAGE CANAL number S01 and channel Q by REGLAGE CANAL
number S23. (See the table below.)
If the CATV channel you want to preset is indicated by its frequency (for example,
152.75 MHz), refer to the table below to find the corresponding channel number.
Channel number S05 is for this example.
Channel system for the French CATV network
Corresponding REGLAGE Receivable
Corresponding REGLAGE Receivable
channel
CANAL
number
frequency
range (MHz)
channel
CANAL
number
frequency
range (MHz)
B
S01
S02
S03
S04
S05
S06
S07
S08
S09
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
S22
S23
116.75–124.75
124.75–132.75
132.75–140.75
140.75–148.75
148.75–156.75
156.75–164.75
164.75–172.75
172.75–180.75
180.75–188.75
188.75–196.75
196.75–204.75
204.75–212.75
212.75–220.75
220.75–228.75
228.75–236.75
236.75–244.75
244.75–252.75
252.75–260.75
260.75–268.75
268.75–276.75
276.75–284.75
284.75–292.75
292.75–300.75
S21
S24
S25
S26
S27
S28
S29
S30
S31
S32
S33
S34
S35
S36
S37
S38
S39
S40
S41
S42
S43
S44
299.25–307.25
307.25–315.25
315.25–323.25
323.25–331.25
331.25–339.25
339.25–347.25
347.25–355.25
355.25–363.25
363.25–371.25
371.25–379.25
379.25–387.25
387.25–395.25
395.25–403.25
403.25–411.25
411.25–419.25
419.25–427.25
427.25–435.25
435.25–443.25
443.25–451.25
451.25–459.25
459.25–467.25
C
D
D
E
F
S22
S23
S24
S25
S26
S27
S28
S29
S30
S31
S32
S33
S34
S35
S36
S37
S38
S39
S40
S41
F
G
H
H
I
J
J
K
L
L
M
N
N
O
P
P
Q
Tip
If you want to return to the previous menu, highlight RETOUR and press OK.
Notes
•
•
•
The menu disappears automatically if you don’t proceed for more than a few minutes.
When adjusting ACCORD FIN, the menu may become difficult to read due to interference
from the picture being received.
24 Presetting channels
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing/disabling programme positions
After setting the channels, you can change
the programme positions as you like. If any
0
programme positions are unused or contain
unwanted channels, you can disable them.
You can also change the station names (not
available on SLV-SE600B). If the station
names are not displayed, you can enter them
manually.
MENU
Changing programme
positions
M/m/,
OK
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
Press MENU, then press M/m to highlight
LISTES and press OK.
MENU
1
2
LISTES
LISTE DES CHAINES
LISTE DES PROGRAMMATIONS
RETOUR
LECTURE
OK
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight LISTE DES
CHAINES, then press OK.
LISTE DES CHAINES
LECTURE
OK
PROG
CA
1 2
0 3
5 6
2 7
0 9
NOM
AAB
CDE
1
2
3
4
5
C
C
C
C
C
FGH
SELECTIONNER
DEPLACER PROG.
SUPPR. PROG.
:
:
:
ANNUL / 0
SORTIE : MENU
continued
Changing/disabling programme positions 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to highlight the row which you
want to change the programme position,
then press ,.
3
4
5
LISTE DES CHAINES
LECTURE
OK
PROG
CA
1 2
0 3
5 6
2 7
0 9
NOM
AAB
CDE
1
2
3
4
5
C
C
C
C
C
To display other pages for programme
positions 6 to 60, press M/m repeatedly.
FGH
SELECTIONNER
REGLER NOM DU PROG.
CONFIRMER
:
:
: OK
SORTIE : MENU
Press M/m until the selected channel row
moves to the desired programme position.
LISTE DES CHAINES
LECTURE
OK
PROG
CA
0 3
5 6
1 2
2 7
0 9
NOM
CDE
1
2
3
4
5
C
C
C
C
C
The selected channel is inserted at the new
programme position and the intermediate
channels are displaced to fill the gap.
AAB
FGH
SELECTIONNER
REGLER NOM DU PROG.
CONFIRMER
:
:
: OK
SORTIE : MENU
Press OK to confirm the setting.
LECTURE
OK
To change the programme position of another station, repeat steps 3 through
5.
6
7
Press MENU to exit the menu.
MENU
Tip
•
If you want to return to the previous menu, highlight RETOUR and press OK.
Note
The menu disappears automatically if you don’t proceed for more than a few minutes.
•
26 Changing/disabling programme positions
Download from Www.Somanuals.com. All Manuals Search And Download.
Disabling unwanted
programme positions
After presetting channels, you can disable
unused programme positions. The disabled
positions will be skipped later when you
press the CHAINE +/– buttons.
Before you start…
ANNUL/0
• Turn on the VCR and the TV.
• Set the TV to the video channel.
1
4
7
2
5
8
0
3
6
9
MENU
M/m
OK
Press MENU, then press M/m to highlight
LISTES, and press OK.
1
2
MENU
LISTES
LISTE DES CHAINES
LISTE DES PROGRAMMATIONS
RETOUR
LECTURE
OK
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight LISTE DES
CHAINES, then press OK.
LISTE DES CHAINES
LECTURE
OK
PROG
CA
1 2
0 3
5 6
2 7
0 9
NOM
AAB
CDE
1
2
3
4
5
C
C
C
C
C
FGH
SELECTIONNER
DEPLACER PROG.
SUPPR. PROG.
:
:
:
ANNUL / 0
SORTIE : MENU
continued
Changing/disabling programme positions 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to highlight the row which you
want to disable.
3
4
LISTE DES CHAINES
LECTURE
OK
PROG
CA
1 2
0 3
5 6
2 7
0 9
NOM
AAB
CDE
1
2
3
4
5
C
C
C
C
C
FGH
SELECTIONNER
DEPLACER PROG.
SUPPR. PROG.
:
:
:
ANNUL / 0
SORTIE : MENU
Press ANNUL/0.
ANNUL/0
LISTE DES CHAINES
The selected row will be cleared as shown
on the right.
PROG
CA
1 2
0 3
NOM
AAB
CDE
1
2
3
4
5
C
C
C
C
2 7
0 9
FGH
SELECTIONNER
DEPLACER PROG.
SUPPR. PROG.
:
:
:
ANNUL / 0
SORTIE : MENU
Repeat steps 3 and 4 for any other programme positions you want to
disable.
5
6
Press MENU to exit the menu.
MENU
Tip
•
If you want to return to the previous menu, highlight RETOUR and press OK.
Notes
•
•
The menu disappears automatically if you don’t proceed for more than a few minutes.
Be sure to select the programme position you want to disable correctly. If you disable a
programme position by mistake, you need to reset that channel manually.
28 Changing/disabling programme positions
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the station names
(not available on SLV-SE600B)
0
You can change or enter the station names
(up to 5 characters). The VCR must receive
channel information (for instance,
SMARTLINK information) for station names
to appear automatically.
MENU
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
M/m/</,
OK
Press MENU, then press M/m to highlight
LISTES and press OK.
1
2
3
MENU
LISTES
LISTE DES CHAINES
LISTE DES PROGRAMMATIONS
RETOUR
LECTURE
OK
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight LISTE DES
CHAINES, then press OK.
LISTE DES CHAINES
LECTURE
OK
PROG
CA
1 2
0 3
5 6
2 7
0 9
NOM
AAB
CDE
1
2
3
4
5
C
C
C
C
C
FGH
SELECTIONNER
DEPLACER PROG.
SUPPR. PROG.
:
:
:
ANNUL / 0
SORTIE : MENU
Press M/m to highlight the row which you
want to change or enter the station name,
then press ,.
LISTE DES CHAINES
LECTURE
OK
PROG
CA
1 2
0 3
5 6
2 7
0 9
NOM
AAB
CDE
1
2
3
4
5
C
C
C
C
C
To display other pages for programme
FGH
positions 6 to 60, press M/m repeatedly.
SELECTIONNER
REGLER NOM DU PROG.
CONFIRMER
:
:
: OK
SORTIE : MENU
continued
Changing/disabling programme positions 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Press ,.
4
5
LISTE DES CHAINES
LECTURE
OK
PROG
CA
1 2
0 3
5 6
2 7
0 9
NOM
AAB
CDE
1
2
3
4
5
C
C
C
C
C
FGH
SELECT. UN CARACT.
SUIVANT
CONFIRMER
:
:
: OK
SORTIE : MENU
Enter the station name.
LISTE DES CHAINES
1 Press M/m to select a character.
LECTURE
OK
PROG
CA
1 2
0 3
5 6
2 7
0 9
NOM
CAB
CDE
1
2
3
4
5
C
C
C
C
C
Each time you press M, the character
changes as shown below.
FGH
A t B t … t Z t a t b t … t z
t 0 t 1 t … t 9 t (symbols) t
(blank space) t A
SELECT. UN CARACT.
SUIVANT
CONFIRMER
:
:
: OK
SORTIE : MENU
2 Press , to set the next character.
The next space is highlighted.
To correct a character, press </, until the character you want to
correct is highlighted, then reset it.
You can set up to 5 characters for the station name.
Press OK to confirm the new name.
6
7
LECTURE
OK
Press MENU to exit the menu.
MENU
Tip
•
If you want to return to the previous menu, highlight RETOUR and press OK.
Notes
•
•
The menu disappears automatically if you don’t proceed for more than a few minutes.
If you enter a symbol in step 5, it will appear as a blank space in the display window.
30 Changing/disabling programme positions
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
You must set the time and date on the VCR to
use the timer features properly. If the VCR
clock was not set in the Auto Set Up
0
procedure, you need to set it manually.
The Auto Clock Set function (not available
on SLV-SE600B) works only if a station in
your area is broadcasting a time signal. If the
Auto Set Up function did not set the clock
correctly for your local area, try another
station for the Auto Clock Set function.
MENU
M/m/,
OK
Setting the clock manually
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
Press MENU, then press M/m to highlight
REGLAGES and press OK.
MENU
1
2
REGLAGES
REGLAGE DES CHAINES
HORLOGE
LANGUE
RETOUR
LECTURE
OK
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight HORLOGE, then
press OK.
HORLOGE
LECTURE
OK
REGLAGE AUTO
NON
CHAINE D’HORLOGE
REGLAGE MANUEL
1
.
1 . 2 0 0 0
SAM
0 : 0 0
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
continued
Setting the clock 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to highlight REGLAGE
MANUEL, then press OK.
3
4
5
6
7
HORLOGE
LECTURE
OK
REGLAGE AUTO
NON
CHAINE D’HORLOGE
REGLAGE MANUEL
1
.
1 . 2 0 0 0
SAM
VEN
JEU
JEU
JEU
0 : 0 0
SELECTIONNER
REGLER
CONFIRMER
:
:
: OK
SORTIE : MENU
Press M/m to set the day.
HORLOGE
LECTURE
OK
REGLAGE AUTO
NON
CHAINE D’HORLOGE
REGLAGE MANUEL
2 8
.
1 . 2 0 0 0
0 : 0 0
SELECTIONNER
REGLER
CONFIRMER
:
:
: OK
SORTIE : MENU
Press , to highlight the month and set the
month pressing M/m.
HORLOGE
LECTURE
OK
REGLAGE AUTO
NON
CHAINE D’HORLOGE
REGLAGE MANUEL
2 8
.
9 . 2 0 0 0
0 : 0 0
SELECTIONNER
REGLER
CONFIRMER
:
:
: OK
SORTIE : MENU
Set the year, hour, and minutes in
sequence, pressing , to highlight the
item to be set, and press M/m to select the
digits.
HORLOGE
LECTURE
OK
REGLAGE AUTO
NON
CHAINE D’HORLOGE
REGLAGE MANUEL
2 8
.
9 . 2 0 0 0
1 8 : 0 0
The day of the week is set automatically.
SELECTIONNER
REGLER
CONFIRMER
:
:
: OK
SORTIE : MENU
Press OK to start the clock.
HORLOGE
LECTURE
OK
REGLAGE AUTO
NON
CHAINE D’HORLOGE
REGLAGE MANUEL
2 8
.
9 . 2 0 0 0
1 8 : 0 0
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
32 Setting the clock
Download from Www.Somanuals.com. All Manuals Search And Download.
Press MENU to exit the menu.
8
MENU
Tips
•
To change the digits while setting, press < to return to the item to be changed, and select the
digits by pressing M/m.
•
If you want to return to the previous menu, highlight RETOUR and press OK.
Note
The menu disappears automatically if you don’t proceed for more than a few minutes.
•
continued
Setting the clock 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the station for the
Auto Clock Set function
0
(not available on SLV-SE600B)
Before you start…
MENU
• Turn on the VCR and the TV.
• Set the TV to the video channel.
M/m
OK
Press MENU, then press M/m to highlight
REGLAGES and press OK.
1
2
3
MENU
REGLAGES
REGLAGE DES CHAINES
HORLOGE
LANGUE
RETOUR
LECTURE
OK
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight HORLOGE, then
press OK.
HORLOGE
LECTURE
OK
REGLAGE AUTO
OUI
1
CHAINE D’HORLOGE
AAB
REGLAGE AUTO is highlighted.
REGLAGE MANUEL
2 8
.
9 . 2 0 0 0
JEU
1 8 : 0 0
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press OK.
HORLOGE
LECTURE
OK
REGLAGE AUTO
OUI
NON
CHAINE D’HORLOGE
REGLAGE MANUEL
2 8
.
9 . 2 0 0 0
JEU
1 8 : 0 0
SELECTIONNER
CONFIRMER
:
: OK
SORTIE : MENU
34 Setting the clock
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to highlight OUI, then press
OK.
4
5
6
7
HORLOGE
LECTURE
OK
REGLAGE AUTO
OUI
1
CHAINE D’HORLOGE
REGLAGE MANUEL
AAB
2 8
.
9 . 2 0 0 0
JEU
JEU
JEU
1 8 : 0 0
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press m to highlight CHAINE
D’HORLOGE, then press OK.
HORLOGE
LECTURE
OK
REGLAGE AUTO
CHAINE D’HORLOGE
1
AAB
REGLAGE MANUEL
2 8
.
9 . 2 0 0 0
1 8 : 0 0
SELECTIONNER
CONFIRMER
:
: OK
SORTIE : MENU
Press M/m repeatedly until the programme
position of the station that carries a time
signal appears.
HORLOGE
LECTURE
OK
REGLAGE AUTO
CHAINE D’HORLOGE
2
CDE
REGLAGE MANUEL
2 8
.
9 . 2 0 0 0
1 8 : 0 0
If the VCR does not receive a time signal
from any station, REGLAGE AUTO
returns to NON automatically.
SELECTIONNER
CONFIRMER
:
: OK
SORTIE : MENU
Press MENU to exit the menu.
MENU
Tips
•
If you set REGLAGE AUTO to OUI, the Auto Clock Set function is activated whenever the
VCR is turned off. The time is adjusted automatically by making reference to the time signal
from the station whose programme position is displayed in the “CHAINE D’HORLOGE”
row. If you do not need the Auto Clock Set, select NON.
•
If you want to return to the previous menu, highlight RETOUR and press OK.
Note
The menu disappears automatically if you don’t proceed for more than a few minutes.
•
Setting the clock 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Canal Plus decoder
You can watch or record the Canal Plus programme if you connect a decoder (not
supplied) to the VCR.
Connecting a decoder
PERITEL cable
(supplied with decoder)
Canal Plus decoder
DECODEUR/t ENTREE
LIGNE-3*1
or
PERITEL
DECODEUR/t ENTREE
LIGNE-2*2
ANTENNE SORTIE
i LIGNE-1 (TV)
ANTENNE
ENTREE
Aerial cable
(supplied)
PERITEL
PERITEL cable (not supplied)
: Signal flow
36 Setting the Canal Plus decoder
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Canal Plus channel
0
To watch or record the Canal Plus
programme, set your VCR to receive the
channel using the on-screen display.
CHAINE +/–
In order to set the channel correctly, be sure
to follow all of the steps below.
MENU
Before you start…
• Turn on the VCR, the TV, and the decoder.
• Set the TV to the video channel.
M/m
OK
Press MENU, then press M/m to highlight
OPTIONS and press OK.
MENU
1
2
3
OPTIONS
OPTIONS - 1
OPTIONS - 2
RETOUR
LECTURE
OK
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight OPTIONS-2, then
press OK.
OPTIONS - 2
LECTURE
OK
DECODEUR / LIGNE3
OPTIONS PROGRAMM.
VEILLE ECO
ENREG. TV DIRECT
RR
RETOUR
DECODEUR
MIXTE
NON
OUI
NORMAL
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight DECODEUR/
LIGNE3*1 (or DECODEUR/LIGNE2*2),
then press OK.
OPTIONS - 2
LECTURE
OK
DECODEUR / LIGNE3
OPTIONS PROGRAMM.
VEILLE ECO
ENREG. TV DIRECT
RR
RETOUR
DECODEUR
LIGNE3
OUI
NORMAL
SELECTIONNER
CONFIRMER
:
: OK
SORTIE : MENU
continued
Setting the Canal Plus decoder 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to highlight DECODEUR, then
press OK.
4
OPTIONS - 2
LECTURE
OK
DECODEUR / LIGNE3
OPTIONS PROGRAMM.
VEILLE ECO
ENREG. TV DIRECT
RR
RETOUR
DECODEUR
MIXTE
NON
OUI
NORMAL
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press MENU to exit the menu.
5
6
MENU
MENU
The menu disappears from the TV screen.
Press MENU again. Then press M/m to
highlight REGLAGES and press OK.
REGLAGES
REGLAGE DES CHAINES
HORLOGE
LANGUE
RETOUR
LECTURE
OK
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight REGLAGE DES
CHAINES, then press OK.
7
8
REGLAGE DES CHAINES
PROG.
1
LECTURE
OK
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
1 2 AAB
C
NON
OUI
ACCORD FIN
RETOUR
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight NORME, then
press OK.
REGLAGE DES CHAINES
PROG.
1
LECTURE
OK
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
B / G
NON
OUI
ACCORD FIN
RETOUR
SELECTIONNER
CONFIRMER
:
: OK
SORTIE : MENU
38 Setting the Canal Plus decoder
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to highlight L or B/G, then
press OK.
9
REGLAGE DES CHAINES
PROG.
1
LECTURE
OK
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
1 2 AAB
• To receive broadcasts in France,
highlight L.
• To receive broadcasts using the PAL
system (for example, in Germany or
Switzerland), highlight B/G.
C
NON
OUI
ACCORD FIN
RETOUR
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight NORMAL/
CABLE, then press OK.
10
11
12
REGLAGE DES CHAINES
PROG.
1
LECTURE
OK
NORME
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
CABLE
OUI
ACCORD FIN
RETOUR
SELECTIONNER
CONFIRMER
:
: OK
SORTIE : MENU
Press M/m to highlight NORMAL, then
press OK.
REGLAGE DES CHAINES
PROG.
1
LECTURE
OK
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
1 2 AAB
To preset CATV (Cable Television)
channels, select CABLE.
C
NON
OUI
ACCORD FIN
RETOUR
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
• CHAINE
Press CHAINE +/– to select the desired
programme position.
Selectedprogramme
position
REGLAGE DES CHAINES
PROG. 1 5
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
C
NON
OUI
1 2
AAB
ACCORD FIN
RETOUR
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight REGLAGE
CANAL, then press OK.
13
REGLAGE DES CHAINES
PROG. 1 5
L
LECTURE
OK
NORME
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
C
1 2
AAB
OUI
ACCORD FIN
RETOUR
SELECTIONNER
CONFIRMER
:
: OK
SORTIE : MENU
continued
Setting the Canal Plus decoder 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to select the Canal Plus channel,
then press OK.
14
15
16
17
REGLAGE DES CHAINES
PROG. 1 5
LECTURE
OK
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
0 2 LMN
C
NON
OUI
ACCORD FIN
RETOUR
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight TV-PAYANTE/
CANAL+, then press OK.
REGLAGE DES CHAINES
PROG. 1 5
LECTURE
OK
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
OUI
NON
ACCORD FIN
RETOUR
SELECTIONNER
CONFIRMER
:
: OK
SORTIE : MENU
Press M/m to highlight OUI, then press
OK.
REGLAGE DES CHAINES
PROG. 1 5
LECTURE
OK
NORME
L
NORMAL / CABLE
REGLAGE CANAL
TV-PAYANTE / CANAL+
AFT
NORMAL
C
0 2
LMN
OUI
OUI
ACCORD FIN
RETOUR
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press MENU to exit the menu.
MENU
Tip
•
If you want to return to the previous menu, highlight RETOUR and press OK.
Notes
•
•
The menu disappears automatically if you don’t proceed for more than a few minutes.
To superimpose subtitles while watching the Canal Plus programme, make both decoder-
VCR and VCR-TV connections using 21-pin PERITEL cables that are compatible with the
RGB signals. You cannot record subtitles on the VCR.
•
When you watch the Canal Plus programme through the RFU input of the TV, press t TV/
MAGN so that the MAGN indicator appears in the display window.
*1 SLV-SE800B only
*2 SLV-SE600B, SE700B, and SX700B only
40 Setting the Canal Plus decoder
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Playing a tape
Z EJECT
AFFICH
ANNUL/0
1
4
7
2
5
8
0
3
6
9
H LECTURE
X PAUSE
M
AV
x STOP
RET
m
NTSC PB
Turn on your TV and set it to the video channel.
Insert a tape.
1
2
The VCR turns on and starts playing
automatically if you insert a tape with its
safety tab removed.
continued
Playing a tape 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Press H LECTURE.
3
When the tape reaches the end, it will rewind automatically.
LECTURE
OK
Additional tasks
To
Press
Stop play
x STOP
Pause play
X PAUSE
Resume play after pause
Fast-forward the tape
X PAUSE or H LECTURE
M
m
AV during stop
Rewind the tape
Eject the tape
RET during stop
Z EJECT
To play an NTSC-recorded tape
Set NTSC PB at the rear of the VCR according to the colour system of your TV.
When your TV is
PAL only
Set NTSC PB to
ON PAL TV
PAL and NTSC
NTSC 4.43
To set the colour system
If the playback picture has no colour, or streaks appear during playback, set the
STANDARD COULEUR option in the OPTIONS-1 menu to conform to the system
To use the time counter
Press ANNUL/0 at the point on the tape that you want to find later. The counter in
the display window resets to “0:00:00.” Search for the point afterwards by referring
to the counter.
SP
MAGN
OPC
To display the counter on the TV screen, press
AFFICH.
42 Playing a tape
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
•
•
•
The counter resets to “0:00:00” whenever a tape is reinserted.
The counter stops counting when it comes to a portion with no recording.
The time counter does not appear on the TV screen when using an NTSC-recorded tape.
Depending on your TV, the following may occur while playing an NTSC-recorded tape:
– The picture becomes black and white.
– The picture shakes.
– No picture appears on the TV screen.
– Black streaks appear horizontally on the TV screen.
– The colour density increases or decreases.
•
•
If you play back a tape in LP or EP mode with the NTSC system, the sound becomes
monaural.
While setting the menu on the TV screen, buttons for playback on the remote commander do
not function.
Starting playback automatically with one button (One
Touch Play)
(not available on SLV-SE600B)
If you use the SMARTLINK connection, you can turn on the VCR and the TV, set the
TV to the video channel, and start playback automatically with one button.
Insert a tape.
1
The VCR automatically turns on.
If you insert a tape with its safety tab removed, the TV turns on and switches to
the video channel. Playback starts automatically.
Press H LECTURE.
2
The TV turns on and switches to the video channel automatically. Playback
starts.
Tip
•
When there already is a tape in the VCR, the VCR and the TV turn on, the TV is set to the
video channel, and playback starts automatically in one sequence when you press H
LECTURE.
Note
When you use the One Touch Play function, leave the TV on or in the standby mode.
•
Playing a tape 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes
COMPT/
DUREE REST
AFFICH
SP/LP
t TV/MAGN
1
4
7
2
5
8
0
3
6
9
CHAINE +/–
z ENR
x STOP
Turn on your TV and set it to the video channel.
To record from a decoder, turn it on.
1
2
Insert a tape with its safety tab in place.
44 Recording TV programmes
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CHAINE +/– to select the programme position or station name* you
want to record.
• CHAINE
3
4
SP
MAGN
OPC
Press SP/LP to select the tape speed, SP or LP.
SP / LP
LP (Long Play) provides recording time twice as long as SP. However, SP
(Standard Play) produces better picture and audio quality.
LP MAGN
OPC
Press z ENR to start recording.
ENR
5
The recording indicator lights up red in the display window.
Recording indicator
LP MAGN
OPC
To stop recording
Press x STOP.
To check the remaining time
Press
AFFICH. With the display on, press COMPT/DUREE REST to check the
remaining time. Each time you press COMPT/DUREE REST, the time counter and
the remaining time appear alternately. The
indicator indicates the remaining time.
SP
0 : 0 0 : 2 2
1 : 4 6
Time counter
Remaining time
In order to get an accurate remaining time indication, be sure DUREE CASSETE in
To watch another TV programme while recording
Press t TV/MAGN to turn off the MAGN indicator in the display window.
1
Select another programme position on the TV.
2
continued
Recording TV programmes 45
Download from Www.Somanuals.com. All Manuals Search And Download.
To save a recording
To prevent accidental erasure, break off the safety
tab as illustrated. To record on the same tape
again, cover the tab hole with adhesive tape.
Safety tab
Tips
•
To select a programme position, you can use the programme number buttons on the remote
commander. For two-digit numbers, press the - (ten’s digit) button followed by the
programme number buttons.
•
If you connect additional equipment to a LINE connector or jack, you can select the input
signal using the CHOIX ENTREE or CHAINE +/– buttons.
•
•
The
AFFICH information appears on the TV screen indicating information about the
tape, but the information won’t be recorded on the tape.
If you don’t want to watch TV while recording, you can turn off the TV. When using a
decoder, make sure to leave it on.
Notes
•
The
AFFICH information does not appear during still (pause) mode or slow-motion
playback.
•
•
The
AFFICH information will not appear while playing an NTSC-recorded tape.
If a tape has portions recorded in both PAL (SECAM, MESECAM) and NTSC systems, the
time counter reading will not be correct. This discrepancy is due to the difference between
the counting cycles of the two video systems.
•
When you insert a non-standard commercially available tape, the remaining time may not be
correct.
•
•
•
The remaining time is intended for rough measurement only.
About 30 seconds after the tape begins playback, the tape remaining time will be displayed.
The station name* may not appear if the VCR does not receive station name information
signals.
* not available on SLV-SE600B
46 Recording TV programmes
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording what you are watching on the TV (TV Direct
Rec)
(not available on SLV-SE600B)
If you use the SMARTLINK connection, you can easily record what you are
watching on the TV (other than tapes being played on the VCR).
Insert a tape with its safety tab in place.
1
2
Press z ENR while you are watching a TV programme or external source.
The VCR automatically turns on, then the TV indicator lights up and the VCR
starts recording what you are watching on the TV.
Tips
•
The TV indicator appears in the display window after you press z ENR in some situations
such as:
– when you are watching a source connected to the TV’s line input, or
– when the TV tuner preset data for the programme position is different from the data in the
VCR tuner preset.
•
•
If there is a tape with its safety tab in place in the VCR, the VCR automatically turns on and
starts recording what you are watching on the TV when you press z ENR.
79).
Notes
•
You cannot record what you are watching using this method when the VCR is in the
following modes; pause, timer standby, tuner preset, Auto Set Up, and recording.
•
When the TV indicator is lit in the display window, do not turn off the TV nor change the TV
programme position. When the TV indicator is not lit, the VCR continues recording the
programme even if you change the TV programme position on the TV.
Recording TV programmes 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes using the Dial
Timer
(SLV-SE800B only)
The Dial Timer function allows you to make
timer recordings of programmes without
turning on your TV. Set the recording timer
to record up to eight programmes, including
settings made with other timer methods, that
will be broadcast within the next month. The
recording start time and recording stop time
can be set at one minute intervals.
?/1 MARCHE/
VEILLE
x STOP
PROG
CHAINE +/–
X
Before you start...
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• To record from a decoder, turn it on.
1
4
7
2
3
6
9
5
8
0
CHOIX
ENTREE
Press PROG.
PROG
1
APPUYER/
TOURNER
“DATE” and “TODAY” appear alternately in the display window.
If the date and time are not set, “DAY” will appear. See step 2 in the
following section, “To set the clock” to set the date and time.
SP
MAGN
OPC
SP
MAGN
OPC
48 Recording TV programmes using the Dial Timer (SLV-SE800B only)
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn PROG to set the recording date.
PROG
2
3
APPUYER/
TOURNER
SP
MAGN
OPC
Press PROG.
PROG
APPUYER/
TOURNER
“START” and the current time appear alternately in the display window.
SP
MAGN
OPC
SP
MAGN
OPC
Turn PROG to set the recording start time.
PROG
4
5
APPUYER/
TOURNER
You can set the recording start time in 15 minute intervals or adjust the time
in one minute intervals by pressing the CHAINE +/– buttons.
SP
MAGN
OPC
CHAINE
ALIGNEMENT
Press PROG.
PROG
APPUYER/
TOURNER
“STOP” and the recording stop time appear alternately in the display window.
SP
MAGN
OPC
SP
MAGN
OPC
continued
Recording TV programmes using the Dial Timer (SLV-SE800B only) 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn PROG to set the recording stop time.
PROG
APPUYER/
TOURNER
6
You can set the recording stop time in 15 minute intervals or adjust the time
in one minute intervals by pressing the CHAINE +/– buttons.
SP
MAGN
OPC
CHAINE
ALIGNEMENT
Press PROG.
PROG
7
8
APPUYER/
TOURNER
The programme position or station name appears in the display window.
SP
MAGN
OPC
Turn PROG to set the programme position.
PROG
APPUYER/
TOURNER
To record from a decoder or other source connected to one or more of the
LINE inputs, turn PROG or press CHOIX ENTREE to display the
connected line in the display window.
SP
MAGN
OPC
CHOIX
ENTREE
Press PROG to complete the setting.
“OK” appears in the display window for about five seconds.
The indicator appears in the display window and the VCR stands by for
PROG
APPUYER/
TOURNER
9
recording.
To record from a decoder or other source, leave the connected equipment
switched on.
To return to the previous step
To return to the previous step, press the CHAINE + and – buttons on the VCR at the
same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press x STOP.
50 Recording TV programmes using the Dial Timer (SLV-SE800B only)
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The
indicator turns off
and the VCR switches on. Remember to press ?/1 to reset the VCR to recording
standby after using the VCR.
You can also do the following tasks while the VCR is recording:
To set the clock
Turn PROG so that “CLOCK” appears in the display window.
1
Press PROG.
2 “DAY” appears in the display window.
Turn PROG to set the day.
3
Press PROG.
4 “MONTH” appears in the display window.
Turn and press PROG to set the month, and then the year.
5 After you set the year, “CLOCK” appears in the display window again.
Turn and press PROG to set the hour and minute.
6
7
When you have finished setting the time, press PROG to start the clock.
Tips
•
•
To cancel a Dial Timer setting, press x STOP on the VCR while you are making the setting.
The programme is recorded in the current tape speed mode. To change the tape speed, press
SP/LP before you complete the setting in step 9.
•
•
When you are recording a programme in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to the LP mode.
Note that some interference will appear on the picture at the point the tape speed is changed.
If you want to keep the same tape speed, set VITESSE AUTO. to NON in the OPTIONS-1
Notes
•
If eight programmes have already been set using the ShowView system or the MINUTERIE
menu, “FULL” appears in the display window for about five seconds.
•
•
The indicator flashes in the display window when you complete the setting in step 9 with
no tape inserted.
If you set the clock using the Auto Clock Set function and REGLAGE AUTO is set to OUI,
the clock will adjust itself to the incoming time signal regardless of adjustments made with
the Dial Timer. Be sure you have set the Auto Clock Set correctly.
•
The station name may not appear if the VCR does not receive station name information
signals.
continued
Recording TV programmes using the Dial Timer (SLV-SE800B only) 51
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Demonstration Mode
The Dial Timer function has a Demonstration Mode that allows the user, such as a
salesperson, to enter more than eight examples of timer settings when demonstrating
the use of the Dial Timer. It cancels the FULL notice which appears if eight
programmes have already been set. Do not use the Demonstration Mode for making
timer recordings. Doing so may cause the settings to be inaccurate.
To activate the Demonstration Mode
Press X (pause) on the VCR while turning the PROG. “DEMO” appears in the
display window for a few seconds.
To cancel the Demonstration Mode
Turn the power off and unplug the mains lead. Although the Demonstration Mode is
cancelled, the timer settings entered while using the Demonstration Mode will
remain. Be sure to manually cancel the timer settings before you use the Dial Timer
52 Recording TV programmes using the Dial Timer (SLV-SE800B only)
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes using the
ShowView system
(not available on SLV-SE600B)
The ShowView system is the feature that
simplifies programming the VCR to make
timer recordings. Just enter the ShowView
?/1
number listed in the TV programme guide.
The date, times, and programme position of
that programme are set automatically. You
can preset a total of eight programmes,
including settings made with other timer
methods.
ANNUL/0
Before you start…
• Check that the VCR clock is set to the
correct time and date.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
1
4
7
2
5
8
0
3
6
9
Programme
number
buttons
CHOIX
• To record from a decoder, turn it on.
• Turn on your TV and set it to the video
channel.
ENTREE
• Set OPTIONS PROGRAMM. to
SHOWVIEW or MIXTE in the
MENU
MINUTERIE
M/m/</,
OK
x STOP
continued
Recording TV programmes using the ShowView system (not available on SLV-SE600B) 53
Download from Www.Somanuals.com. All Manuals Search And Download.
MINUTERIE Press
MINUTERIE.
1
• When you set OPTIONS PROGRAMM.
to MIXTE:
METHODE DE PROGRAMMATION
NORMALE
SHOWVIEW
The METHODE DE
PROGRAMMATION menu appears on
the TV screen. Press M/m to select
SHOWVIEW, then press OK.
LECTURE
OK
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
2 8 . 9 JEU
• When you set OPTIONS PROGRAMM.
to SHOWVIEW:
SHOWVIEW
N° SHOWVIEW
– – – – – – – – –
The SHOWVIEW menu appears on the
TV screen.
REGLER
:
0–9
SORTIE : MENU
Press the programme number buttons to
enter the ShowView number.
1
4
7
2
5
8
0
3
6
9
2
3
SHOWVIEW
2 8 . 9 JEU
N° SHOWVIEW
1 2 4 6 – – – – –
If you make a mistake, press ANNUL/0
and re-enter the correct number.
REGLER
CONFIRMER : OK
ANNULER ANNUL / 0
:
0–9
ANNUL/0
:
SORTIE : MENU
Press OK.
MINUTERIE
2 8 . 9 JEU
PROG.
The date, start and stop times, programme
position or station name, tape speed, and
VPS/PDC setting appear on the TV screen.
LECTURE
OK
DATE
AUJOURD.
HEURE
1 9 : 0 0 2 0 : 0 0
3 5
SP / LP
SP
VPS / PDC
NON
LISTE
If “– –” appears in the “PROG.”
(programme) column (this may happen for
local broadcasts), you have to set the
appropriate programme position manually.
Press M/m to select the desired programme
position.
CHOIX
SELECTIONNER
REGLER
ANNULER
:
:
:
ENTREE
ANNUL / 0
SORTIE : MENU
ANNUL/0
To record from a decoder or other source connected to one or more of the
LINE inputs, press CHOIX ENTREE to display the connected line in the
“PROG.” position.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
If the information is incorrect, press ANNUL/0 to cancel the setting.
54 Recording TV programmes using the ShowView system (not available on SLV-SE600B)
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to change the date, tape speed,
and the VPS/PDC setting:
4
MINUTERIE
2 8 . 9 JEU
LECTURE
OK
DATE
AUJOURD.
HEURE
PROG.
3 5
1 9 : 0 0 2 0 : 0 0
1 Press </, to highlight the item you
SP / LP
SP
VPS / PDC
OUI
want to change.
LISTE
2 Press M/m to reset it.
SELECTIONNER
REGLER
ANNULER
:
:
:
ANNUL / 0
SORTIE : MENU
• To record the same programme every
day or the same day every week, see
• To use the VPS/PDC function, set VPS/PDC to OUI.
Press MENU to exit the menu.
5
6
MENU
Press ?/1 to turn off the VCR.
The
indicator appears in the display window and the VCR stands by for
recording.
To record from a decoder or other source, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 4 above, press m to select the recording pattern. Each time you press m, the
indication changes as shown below. Press M to change the indication in reverse order.
AUJOURD. t DIM-SAM (Sunday to Saturday) t LUN-SAM (Monday to Saturday)
t LUN-VEN (Monday to Friday) t SAM (every Saturday) ..... t LUN (every
Monday) t DIM (every Sunday) t 1 month later t (dates count down) t
DEMAIN t AUJOURD.
Timer recording with VPS/PDC signals
Some broadcast systems transmit VPS (Video Programme System) or PDC
(Programme Delivery Control) signals with their TV programmes. These signals
ensure that your timer recordings are made regardless of broadcast delays, early
starts, or broadcast interruptions (when the VPS or PDC indicator in the display
window is lit).
To use the VPS/PDC function, set VPS/PDC to OUI in step 4 above. You can also
use the VPS/PDC function for a source connected to one or more of the LINE inputs.
continued
Recording TV programmes using the ShowView system (not available on SLV-SE600B) 55
Download from Www.Somanuals.com. All Manuals Search And Download.
To record satellite broadcasts
If you connect a satellite tuner and the VCR, you can record satellite programmes.
Turn on the satellite tuner.
1
On the satellite tuner, select the satellite programme for which you want to make
2 a timer setting.
Follow steps 1 through 6 above.
3
Keep the satellite tuner turned on until the VCR finishes recording the satellite
4 programme for which you have made a timer setting.
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The
indicator turns off
and the VCR switches on. Remember to press ?/1 to reset the VCR to recording
standby after using the VCR.
You can also do the following tasks while the VCR is recording:
Tips
•
To set the programme position, you can also use the CHAINE +/– or programme number
buttons.
•
To set the programme position with a two digit number, press - (ten’s digit) button followed
by the programme number buttons.
•
•
•
To set the line input video source, you can also use the CHAINE +/– buttons.
To set the tape speed, you can also use the SP/LP button.
When you are recording a programme in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to the LP mode.
Note that some interference will appear on the picture at the point the tape speed is changed.
If you want to keep the same tape speed, set VITESSE AUTO. to NON in the OPTIONS-1
•
To check, change, or cancel the programme setting, press </, to choose LISTE, then press
68).
Notes
•
If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC
signals, the VCR will start recording at the set time without using the VPS/PDC function.
The indicator flashes in the display window when you press ?/1 with no tape inserted.
When you set OPTIONS PROGRAMM. to NORMALE in the OPTIONS-2 menu, the
SHOWVIEW menu does not appear on the TV screen. Select SHOWVIEW or MIXTE.
•
•
•
•
The VPS/PDC function is automatically set to NON for the timer recording of a satellite
programme.
The station name may not appear if the VCR does not receive station name information
signals.
56 Recording TV programmes using the ShowView system (not available on SLV-SE600B)
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the timer manually
If the ShowView system is not available in
your area, follow the instructions below to set
the timer to record programmes.
?/1
Before you start…
• Check that the VCR clock is set to the
correct time and date.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• To record from a decoder, turn it on.
• Turn on your TV and set it to the video
channel.
• Set OPTIONS PROGRAMM. to
NORMALE or MIXTE in the OPTIONS-2
1
2
5
8
0
3
6
9
4
7
CHOIX
ENTREE
MENU
MINUTERIE
M/m/</,
OK
x STOP
continued
Setting the timer manually 57
Download from Www.Somanuals.com. All Manuals Search And Download.
MINUTERIE
Press
MINUTERIE.
1
For SLV-SE600B:
MINUTERIE
The MINUTERIE menu appears on the TV
screen.
2 8 . 9 JEU
DATE
HEURE
PROG.
– –
AUJOURD.
– – : – – – – : – –
LECTURE
OK
SP / LP
SP
LISTE
SELECTIONNER
REGLER
ANNULER
:
:
:
CLEAR
SORTIE : MENU
For SLV-SE700B, SX700B, and SE800B:
• When you set OPTIONS PROGRAMM.
to MIXTE:
The METHODE DE
METHODE DE PROGRAMMATION
NORMALE
SHOWVIEW
PROGRAMMATION menu appears on
the TV screen. Press M/m to select
NORMALE, then press OK.
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
MINUTERIE
• When you set OPTIONS PROGRAMM.
to NORMALE:
2 8 . 9 JEU
PROG.
DATE
HEURE
AUJOURD.
– – : – – – – : – –
– –
The MINUTRERIE menu appears on
the TV screen.
SP / LP
LISTE
SP
VPS / PDC
NON
SELECTIONNER
REGLER
ANNULER
:
:
:
ANNUL / 0
SORTIE : MENU
Set the date, start and stop times,
programme position or station name*, tape
speed, and VPS/PDC function*:
2
MINUTERIE
2 8 . 9 JEU
PROG.
LECTURE
OK
DATE
AUJOURD.
HEURE
1 9 : 0 0 2 0 : 0 0
3 5
SP / LP
LISTE
SP
VPS / PDC
NON
1 Press , to highlight each item in turn.
2 Press M/m to set each item.
CHOIX
ENTREE
SELECTIONNER
REGLER
ANNULER
:
:
:
ANNUL / 0
SORTIE : MENU
To correct a setting, press < to return to
that setting and reset.
• To record the same programme every day or the same day every week,
• To use the VPS/PDC function*, set VPS/PDC to OUI. For details about
• To record from a decoder or other source connected to one or more of the
LINE inputs, press CHOIX ENTREE to display the connected line in the
“PROG.” position.
58 Setting the timer manually
Download from Www.Somanuals.com. All Manuals Search And Download.
Press MENU to exit the menu.
3
4
MENU
Press ?/1 to turn off the VCR.
The
indicator appears in the display window and the VCR stands by for
recording.
To record from a decoder or other source, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 2 above, press m to select the recording pattern. Each time you press m, the
indication changes as shown below. Press M to change the indication in reverse order.
AUJOURD. t DIM-SAM (Sunday to Saturday) t LUN-SAM (Monday to Saturday)
t LUN-VEN (Monday to Friday) t SAM (every Saturday) ..... t LUN (every
Monday) t DIM (every Sunday) t 1 month later t (dates count down) t
DEMAIN t AUJOURD.
To record satellite broadcasts
If you connect a satellite tuner and the VCR, you can record satellite programmes.
Turn on the satellite tuner.
1
On the satellite tuner, select the satellite programme for which you want to make
2 a timer setting.
Follow steps 1 through 4 above.
3
Keep the satellite tuner turned on until the VCR finishes recording the satellite
4 programme for which you have made a timer setting.
continued
Setting the timer manually 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
•
To set the programme position, you can also use the CHAINE +/– or programme number
buttons.
•
To set the programme position with a two digit number, press - (ten’s digit) button followed
by the programme number buttons.
•
•
•
To set the line input video source, you can also use the CHAINE +/– buttons.
To set the tape speed, you can also use the SP/LP button.
When you are recording a programme in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to the LP mode.
Note that some interference will appear on the picture at the point the tape speed is changed.
If you want to keep the same tape speed, set VITESSE AUTO. to NON in the OPTIONS-1
•
•
Even if you set OPTIONS PROGRAMM.* to SHOWVIEW in the OPTIONS-2 menu, you
can set the timer manually. Press MENU to select MINUTERIE, then go to step 2.
To check, change, or cancel the programme setting, press </, to choose LISTE, then press
68).
Notes
•
When setting the timer with VPS/PDC* signals, enter the start and stop times exactly as
indicated in the TV programme guide. Otherwise, the VPS/PDC function won’t work.
•
If the VPS/PDC* signal is too weak or the broadcasting station failed to transmit VPS/PDC
signals, the VCR will start recording at the set time without using the VPS/PDC function.
•
•
The
indicator flashes in the display window when you press ?/1 with no tape inserted.
The VPS/PDC function* is automatically set to NON for the timer recording of a satellite
programme.
•
The station name* may not appear if the VCR does not receive station name information
signals.
* not available on SLV-SE600B
60 Setting the timer manually
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Operations
Playing/searching at various speeds
×2
SLV-SE800B
y
RALENTI
H LECTURE
JOG
Shuttle ring
1
4
7
2
5
8
0
3
6
9
m
M
SLV-SE600B, SE700B, SX700B
H LECTURE
M
m
AV
m
RET
M
Playback options
Operation
View the picture during fast-
forward or rewind
During fast-forward, hold down M
down m RET/m.
AV/M. During rewind, hold
continued
Playing/searching at various speeds 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback options
Operation
Play at high speed
•
•
During playback, press M
commander.
AV or m
RET on the remote
RET/m.
During playback, hold down M
AV/M or m
When you release the button, normal playback resumes.
Play at twice the normal speed
Play in slow motion
During playback, press ×2.
During playback, press y RALENTI.
Play frame by frame
During pause, press M
AV or m
RET on the remote
RET to play one
commander. Hold down M
AV or m
frame each second.
Rewind and start play
During stop, press H LECTURE on the VCR while holding down
m on the VCR.
To resume normal playback
Press H LECTURE.
Using the shuttle ring
(SLV-SE800B only)
With the shuttle ring, you can operate a variety of playback options. There are two
ways for using the shuttle ring, normal mode and jog mode.
To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or anticlockwise. Each
change in the shuttle ring position changes the playback mode in the following way.
Pause
Slow motion
Slow motion
in reverse
Normal speed
in reverse
Normal speed
(Initial speed)
Double speed
in reverse
Double speed
High speed
High speed in
reverse
62 Playing/searching at various speeds
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enter the jog mode. The JOG button lights up. If you change to the jog
mode during any playback mode, playback pauses so you can see a still picture. Each
change in the shuttle ring position shifts the picture one frame. To shift frames in
reverse, turn the shuttle ring anticlockwise. The frame shift speed depends on the
speed you turn the shuttle ring.
To resume normal mode, press JOG again. The JOG button turns off.
Tip
•
Adjust the picture using the ALIGNEMENT +/– buttons if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
Notes
•
•
The sound is muted during these operations.
In the LP mode, noise may appear or there may be no colour.
•
If the playback mode mark doesn’t appear on the TV screen, press
AFFICH.
Playing/searching at various speeds 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the recording duration time
After you have started recording in the
normal way, you can have the VCR stop
recording automatically after a specified
duration.
z ENR
While recording, press z ENR.
1
The
indicator appears in the display window.
SP
MAGN
OPC
Press z ENR repeatedly to set the duration time.
2
Each press advances the time in increments of 30 minutes.
Normal recording
0:30
1:00
5:30
6:00
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
To extend the duration
Press z ENR repeatedly to set a new duration time.
To cancel the duration
Press z ENR repeatedly until the
indicator disappears and the VCR returns to the
normal recording mode.
To stop recording
To stop the VCR while recording, press x STOP.
Note
•
You cannot display the current tape time in the display window when setting the recording
duration time.
64 Setting the recording duration time
Download from Www.Somanuals.com. All Manuals Search And Download.
Synchronized Recording
(SLV-SE800B only)
You can set the VCR to automatically record programmes from equipment such as a
satellite tuner by connecting the equipment to the DECODEUR/ENTREE LIGNE-3
connector. The connected equipment must have a timer function for this feature to
work.
When the connected equipment turns on, the VCR also automatically turns on and
starts recording a programme from DECODEUR/ENTREE LIGNE-3.
How to connect for Synchronized Recording
Connect the DECODEUR/ENTREE LIGNE-3 connector of the VCR to the TV
PERITEL connector of the satellite tuner. Then connect the LIGNE-1 (TV)
connector to the TV.
PERITEL cable (not supplied)
Satellite tuner, etc.
DECODEUR/t ENTREE
LIGNE-3
TV PERITEL
connector
i LIGNE-1 (TV)
PERITEL cable (not supplied)
PERITEL
: Signal flow
continued
Synchronized Recording (SLV-SE800B only) 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording programmes using
the Synchronized Recording
function
Before you start...
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
SP/LP
• Set DECODEUR/LIGNE3 to LIGNE3 in
1
4
7
2
5
8
0
3
6
9
CHOIX
ENTREE
ENR SYNCHRO
CHAINE +/–
Press CHOIX ENTREE or CHAINE +/– to display “L3” in the display window.
1
Set the timer on the connected equipment to the time of the programme you want
2 to record, then turn it off.
Press SP/LP to select the tape speed.
3
4
Hold down ENR SYNCHRO for more than two seconds.
The ENR SYNCHRO button lights up and the VCR stands by for recording.
The VCR automatically turns on and starts recording when it receives an input
signal from the connected equipment.
The VCR automatically stops recording when the tape reaches the end or when
the connected equipment stops transmitting an input signal.
To cancel the Synchronized Recording function
Press ENR SYNCHRO. The ENR SYNCHRO button turns off.
To stop recording
Press x STOP while recording.
66 Synchronized Recording (SLV-SE800B only)
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
•
This function may not work with some types of satellite tuners.
Some TVs or other equipment with timer functions will automatically turn off if no operation
is performed within a certain amount of time. In this case, the Synchronized Recording also
stops automatically.
•
•
When the connected equipment turns on while the ENR SYNCHRO button is lit, recording
starts automatically.
If the settings for timer recording and Synchronized Recording overlap, the programme that
starts first has priority and the second programme starts recording only after the first
programme has finished.
•
The Auto Clock Set function does not work while the VCR stands by for Synchronized
Recording.
Synchronized Recording (SLV-SE800B only) 67
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking/changing/cancelling timer
settings
Before you start…
• Turn on your TV and set it to the video
channel.
?/1
ANNUL/0
1
4
7
2
5
8
0
3
6
9
MENU
M/m/</,
OK
Press ?/1 to turn on the VCR.
1
2
Press MENU, then press M/m to highlight LISTES and press OK.
Press M/m to highlight LISTE DES
3 PROGRAMMATIONS, then press OK:
LISTE DES PROGRAMMATIONS
2 8 . 9 JEU
VPS
PDC
DATE
AUJOURD.
3 0 . 9
HEURE
PROG.
3 5
AAB
CDE
FGH
I J K
– –
1 9 : 0 0 2 0 : 0 0
2 0 : 0 0 2 1 : 0 0
1 0 : 0 0 1 1 : 3 0
1 4 : 0 0 1 5 : 0 0
SP
LP
LP
LP
SP
–
• If you want to change or cancel a setting, go
on to the next step.
VPS
PDC
2 . 1 0
LUN– VEN
DIM
– – . – –
6 : 3 0
– : – –
7 : 0 0
– : – –
• If you do not need to change or cancel the
settings, press MENU, then turn off the VCR
to return to recording standby.
RETOUR
SELECTIONNER
REGLER
:
: OK
ANNULER
:
ANNUL / 0
SORTIE : MENU
68 Checking/changing/cancelling timer settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to select the setting you want to
4 change or cancel, then press OK.
MINUTERIE
2 8 . 9 JEU
DATE
. 1 0
HEURE
1 0 : 0 0 1 1 : 3 0
PROG.
CDE
2
The selected setting appears in the MINUTERIE
menu.
SP / LP
LISTE
LP
VPS / PDC
OUI
SELECTIONNER
REGLER
ANNULER
:
:
:
ANNUL / 0
SORTIE : MENU
• To change the setting, press </, to highlight the item you want to change,
then press M/m to reset it.
• To cancel the setting, press ANNUL/0.
Press MENU to exit the menu.
5
6
If any settings remain, turn off the VCR to return to recording standby.
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
Programme 1
Programme 2
about 20 seconds
will be cut off
Programme 1
Programme 2
about 20 seconds will be cut off
Tip
•
In step 6 above, you can check the LISTE DES PROGRAMMATIONS by selecting LISTE
and pressing OK. Press MENU to exit the LISTE DES PROGRAMMATIONS.
Checking/changing/cancelling timer settings 69
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording stereo and bilingual
programmes
In ZWEITON (German stereo) system
This VCR automatically receives and records stereo and bilingual programmes based
on the ZWEITON system. When a stereo or bilingual programme is received, the
STEREO indicator appears in the display window.
To select bilingual sound while recording
Press CHOIX SON to select the sound you want.
To listen to
Main
On-screen display
PRINCIPALE
Display window
STEREO
Sub
SEONDAIRE
STEREO
Main and sub
PRINCIP./SEC
STEREO
In NICAM system
This VCR receives and records stereo and bilingual programmes based on the
NICAM system (The NICAM indicator appears). When a stereo or bilingual
programme is received, the STEREO indicator appears in the display window.
To record a NICAM programme, SON HIFI in the OPTIONS-1 menu should be set
To select the sound while recording
Press CHOIX SON to select the sound you want.
Stereo programmes
To listen to
Stereo
On-screen display
STEREO
Display window
STEREO
Standard sound*
No indicator
No indicator
* Usually the mixed sound of left and right channels (monaural)
70 Recording stereo and bilingual programmes
Download from Www.Somanuals.com. All Manuals Search And Download.
Bilingual programmes
To listen to
Main
On-screen display
PRINCIPALE
Display window
STEREO
Sub
SECONDAIRE
PRINCIP./SEC
No indicator
STEREO
Main and sub
Standard sound*
STEREO
No indicator
* Usually the main sound (monaural)
Selecting the sound during playback
Press CHOIX SON to select the sound you want.
To listen to
On-screen display
Display window
Stereo/main and sub
STEREO
STEREO
(left and right channels)
Left channel/main
Right channel/sub
Standard sound
CANAL G
CANAL D
No indicator
STEREO
STEREO
No indicator
How sound is recorded on a video tape
The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the
main track along with the picture. Monaural sound is recorded onto the normal audio
track along the edge of the tape.
Stereo
Usually mixed
Bilingual
Usually main sound
left/right channels
Normal audio track
(monaural)
Hi-fi audio track
(main track)
Stereo sound
(left/right channels)
Main (left channel)
Sub (right channel)
Notes
•
•
•
•
To listen to playback sounds in stereo, you must use the PERITEL or SORTIE AUDIO
connections.
When you play a tape recorded in monaural, the sound is heard in monaural regardless of the
CHOIX SON setting.
If the CHOIX SON button does not function, check that MIX AUDIO in the OPTIONS-1
menu is set to NON (see page 78).
If SON HIFI is set to STANDARD, the standard sound will be recorded on both the hi-fi and
normal audio tracks. Pressing CHOIX SON will not change the sound.
Recording stereo and bilingual programmes 71
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching using the Acces Smart function
If you record multiple programmes on a tape,
use the Acces Smart function to see what has
been recorded on your tape. You can see
information such as date, time, and
?/1
programme position of programmes recorded
on a tape. You can also start playback
directly from the selected programme using
the ACCES SMART screen.
All programmes are listed on the screen,
regardless of how the programme was
recorded.
1
4
7
2
5
8
0
3
6
9
The data of the last tape inserted into the
VCR is automatically stored in memory. If
you want to recall the latest data screen,
select DONNEES RECENTES in the
Before you start…
• Turn on your TV and set it to the video
channel.
ACCES
SMART
M/m/</,
OK
After recording, press ?/1 to turn on the VCR.
Press ACCES SMART.
1
2
ACCES SMART
1 8 0 MIN.
PROG.
3 5
FGH
AAB
I J K
DATE
2 8 . 9
2 9 . 9
3 0 . 9
1 . 1 0
HEURE
1 9 : 0 0 2 0 : 0 0
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
Press M/m/</, to select the programme you
3 want to start viewing.
6 : 3 0
7 : 0 0
ESPACE VIERGE 3 0 MIN.
SELECTIONNER
REGLER
:
: OK
SORTIE
:
ACCES SMART
72 Searching using the Acces Smart function
Download from Www.Somanuals.com. All Manuals Search And Download.
Press OK.
4
ACCES SMART
1 8 0 MIN.
The VCR starts searching, and playback starts
automatically from the beginning of the selected
programme.
RECHERCHE EN COURS
To stop searching
Press x STOP.
To exit the ACCES SMART screen
Press ACCES SMART.
To record in a blank space
ACCES SMART
1 8 0 MIN.
PROG.
FGH
Blank space on the tape will appear as a blank row
in the ACCES SMART screen. Select the last
blank row in step 3, then press OK. The VCR
rewinds/fast-forwards the tape to the beginning of
the blank space, then stops. Start recording. Note
that “ESPACE VIERGE” and the remaining time
indication only refers to the length of the last blank
space.
DATE
HEURE
2 9 . 9
3 0 . 9
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
AAB
1 . 1 0
6 : 3 0
7 : 0 0
I J K
ESPACE VIERGE 3 0 MIN.
SELECTIONNER
REGLER
:
: OK
SORTIE
:
ACCES SMART
To recall the latest data screen after you remove the tape
You can display the data of the last tape used to record a programme, even after you
have removed the tape.
If you reinsert the tape and record additional programmes, be sure to select
DONNEES RECENTES. Otherwise, all of the data for the tape is deleted.
Reinsert the last tape that you used to record a programme.
1
2
Press ACCES SMART.
ACCES SMART
PAS DE DONNEES
DONNEES RECENTES
SELECTIONNER
REGLER
:
: OK
SORTIE
:
ACCES SMART
continued
Searching using the Acces Smart function 73
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to highlight DONNEES RECENTES.
3
4
ACCES SMART
If you want to reset the latest data screen,
highlight PAS DES DONNEES and press OK,
then record a programme.
DATE
HEURE
PROG.
3 5
FGH
AAB
I J K
2 8 . 9
2 9 . 9
3 0 . 9
1 9 : 0 0 2 0 : 0 0
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
1 . 1 0
6 : 3 0
7 : 0 0
PAS DE DONNEES
DONNEES RECENTES
SELECTIONNER
REGLER
:
: OK
SORTIE
:
ACCES SMART
Press OK.
The latest data stored in the VCR’s memory is displayed.
Tips
•
•
You can store information for up to 24 programmes on a single list.
While recording, you can display the ACCES SMART screen using the ACCES SMART
button. If you decide to stop recording, press ACCES SMART to make the ACCES SMART
screen disappear first. Then press x STOP.
Notes
•
•
•
You cannot use this function unless the clock is set.
Depending on the tape, the total or remaining time may not appear correctly.
If many short programmes are recorded on a tape, multiple programmes may be included in a
single block. In this case, only the latest programme information will appear in the ACCES
SMART screen.
•
Blank time is measured from the end of the last recorded programme to the end of the tape.
However, if you eject the tape and then make a new recording on the same tape, the original
recorded programme(s) is displayed as a blank space.
•
•
•
If no information is stored in the VCR’s memory, DONNEES RECENTES does not appear in
the ACCES SMART screen.
The station name* may not appear if the VCR does not receive station name information
signals.
If you start recording a programme “D” from the middle of a previously recorded programme
“A” and into another previously recorded programme “B,” the Acces Smart information for
the second programme “B,” which is recorded over, is deleted.
Originally recorded programmes
A
B
C
Recording the programme “D” over the programme “A” and “B”
A
D
C
* not available on SLV-SE600B
74 Searching using the Acces Smart function
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching using the index function
The VCR automatically marks the tape with
an index signal at the point where each
recording begins. Use these signals as
references to find a specific recording.
./>
RECHER
INDEX
1
2
3
Insert an indexed tape into the VCR.
1
2
Press ./> RECHER INDEX.
• To search ahead, press > RECHER
INDEX.
INDEX
RECHERCHE
• To search backwards, press . RECHER
INDEX.
The VCR starts searching, and playback starts
automatically from that point.
To stop searching
Press x STOP.
Note
•
No index signal will be added when recording starts from recording pause. However, an
index signal will be marked if you change the programme position during recording pause.
Searching using the index function 75
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape (the indicator
flashes in the display window, then turns off),
distortion may occur if the recording is in poor
condition. In this case, manually adjust the tracking.
During playback, press ALIGNEMENT +/– to
ALIGNEMENT
display the tracking meter. The distortion should
disappear as you press one of the two buttons (the
indicator lights up). To resume automatic tracking
adjustments, eject the tape and re-insert it.
Tracking meter
About the Reality Regenerator (RR) function
(not available on SLV-SE600B)
The Reality Regenerator (RR) function automatically restores the picture to its
original quality during playback.
To use the RR function, press RR.
The RR button lights up. You can set
RR to NORMAL or HAUTE in the
To turn it off, press RR. The RR
button turns off.
RR
About the Optimum Picture Control (OPC) function
The Optimum Picture Control (OPC) function
automatically improves recording and playback
OPTIONS - 1
OPC
OUI
quality by adjusting the VCR to the condition of the
video heads and tape. To maintain better picture
quality, we recommend that you set OPC to OUI in
the OPTIONS-1 menu (the OPC indicator lights up
MONTAGE
NON
MIX AUDIO
NON
SON HIFI
NICAM
NON
VITESSE AUTO.
DUREE CASSETTE
STANDARD COULEUR
E1 8 0
AUTO
RETOUR
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
OPC playback
The OPC function automatically works on all types of tapes, including rental tapes
and tapes that were not recorded with OPC.
OPC recording
Whenever you insert a tape and start recording for the first time, the VCR adjusts to
the tape using the OPC function (the OPC indicator flashes rapidly). This adjustment
is retained until the tape is ejected.
76 Adjusting the picture
Download from Www.Somanuals.com. All Manuals Search And Download.
To deactivate the OPC function
Set OPC to NON in the OPTIONS-1 menu. The OPC indicator in the display
window turns off.
Tip
•
To set tracking to the centre position, press the ALIGNEMENT + and – buttons at the same
time.
Notes
•
You can adjust the tracking for an NTSC-recorded tape but the tracking meter won’t be
displayed.
•
With the Auto Long Play function on, the OPC function will work only in SP mode. If the
tape speed automatically switches from SP to LP, the OPC function turns off. If, however, the
entire programme is recorded in LP mode, the OPC function will work.
•
There is a delay of about ten seconds before the VCR actually starts recording while the VCR
analyses the tape. To avoid the delay, first set the VCR to recording pause (the OPC indicator
flashes slowly) and press z ENR to have the VCR analyse the tape (the OPC indicator
flashes rapidly) and return to recording pause. After the OPC indicator stops flashing, press
X PAUSE to start recording immediately.
If you want to start recording quickly without using the OPC function, first set the VCR to
recording pause (the OPC indicator flashes slowly) and press X PAUSE again to start
recording.
Adjusting the picture 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing menu options
Press MENU, then select OPTIONS and press
1 OK.
OPTIONS
OPTIONS - 1
OPTIONS - 2
RETOUR
SELECTIONNER
REGLER
:
: OK
SORTIE : MENU
Press M/m to highlight OPTIONS-1 or OPTIONS-2, then press OK.
2
OPTIONS - 1
OPTIONS - 2
OPC
OUI
DECODEUR / LIGNE3
OPTIONS PROGRAMM.
VEILLE ECO
ENREG. TV DIRECT
RR
RETOUR
DECODEUR
MIXTE
MONTAGE
NON
MIX AUDIO
SON HIFI
VITESSE AUTO.
DUREE CASSETTE
STANDARD COULEUR
NON
NICAM
NON
E1 8 0
AUTO
NON
OUI
NORMAL
RETOUR
SELECTIONNER
REGLER
:
SELECTIONNER
REGLER
:
: OK
: OK
SORTIE : MENU
SORTIE : MENU
Press M/m to select the option, then press OK.
Press M/m to change the setting, then press OK.
Press MENU to return to the original screen.
3
4
5
Menu choices
Initial settings are indicated in bold print.
OPTIONS-1
Menu option
Set this option to
OPC
• OUI to switch on the OPC (Optimum Picture Control) function
and improve picture quality.
•
•
NON to switch off OPC.
MONTAGE
OUI to minimize picture deterioration when editing.
• NON to turn off MONTAGE.
MIX AUDIO
•
OUI to listen to the hi-fi and normal audio tracks at the same
time. The CHOIX SON button will not function.
• NON to listen to the hi-fi and normal audio tracks separately.
Select the sound using the CHOIX SON button.
If you press Z EJECT or turn the VCR off, MIX AUDIO will be
• NICAM to record NICAM broadcasts on the hi-fi audio track.
SON HIFI
•
STANDARD to record standard sound on the hi-fi audio track.
78 Changing menu options
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu option
Set this option to
VITESSE AUTO.
•
OUI to change the timer recording tape speed automatically to
the LP mode when the remaining tape length becomes shorter
than the recording time. Note that for VITESSE AUTO. to
work correctly, the DUREE CASSETTE setting must be
accurate.
• NON to keep the set tape speed.
DUREE CASSETTE
• E180 to use an E-180 or shorter type tape.
•
•
•
E195 to use an E-195 type tape.
E240 to use an E-240 type tape.
E300 to use an E-300 type tape.
STANDARD
COULEUR
• AUTO to set the colour system automatically.
•
•
PAL to play back a tape recorded in the PAL colour system.
SECAM to play back a tape recorded in the SECAM colour
system.
•
MESECAM to play back a tape recorded in the MESECAM
colour system.
If you press Z EJECT or turn the VCR off, STANDARD
OPTIONS-2
Menu option
Set this option to
• DECODEUR to use the DECODEUR/ENTREE LIGNE-2*1
connector as the Canal Plus decoder connector.
DECODEUR/
LIGNE2*1
•
LIGNE2 to use the DECODEUR/ENTREE LIGNE-2*1
connector as the line input connector.
• DECODEUR to use the DECODEUR/ENTREE LIGNE-3*2
DECODEUR/
LIGNE3*2
connector as the Canal Plus decoder connector.
•
LIGNE3 to use the DECODEUR/ENTREE LIGNE-3*2
connector as the line input connector.
OPTIONS
• MIXTE to display the METHODO DE PROGRAMMATION
menu for selecting NORMALE or SHOWVIEW when pressing
PROGRAMM.*3
the
NORMALE to display the MINUTERIE menu when pressing
the MINUTERIE button.
SHOWVIEW to display the SHOWVIEW menu when pressing
the MINUTERIE button.
MINUTERIE button.
•
•
VEILLE ECO
•
OUI to turn off the indicators in the display window to conserve
the VCR’s power.
• NON to turn on the indicators in the display window while the
VCR is standing by.
ENREG. TV
DIRECT*3
• OUI to activate the TV Direct Rec function.
•
NON to deactivate it.
RR*3
• NORMAL for normal everyday use.
•
HAUTE for well-used video tapes such as rented tapes.
Select this option when NORMAL does not improve the picture
quality.
continued
Changing menu options 79
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
When you set a timer recording, the indicators in the display window remain on, even though
VEILLE ECO is set to OUI.
•
With the MONTAGE option OUI, the OPC function does not work.
*1 SLV-SE600B, SE700B, and SX700B only
*2 SLV-SE800B only
*3 not available on SLV-SE600B
80 Changing menu options
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Connecting to a VCR or stereo system
How to connect to record on this VCR
Connect the line outputs of the other VCR to the ENTREE LIGNE connector or jacks
of this VCR. Refer to the examples A through C and choose the connection that best
suits your VCR.
Example A
Your VCR (Recorder)
TV
i LIGNE-1 (TV)
Other VCR (Player)
PERITEL
VMC-2121HG PERITEL cable (not supplied)
: Signal flow
Example B
Your VCR (Recorder)
TV
ENTREE LIGNE-2*1
(open cover to connect)
SORTIE LIGNE
VMC-820HG audio/video cable (not supplied)
: Signal flow
Other VCR (Player)
continued
Connecting to a VCR or stereo system 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Example C
Your VCR (Recorder)
TV
DECODEUR/
t ENTREE
LIGNE-3*1
or
Other VCR (Player)
DECODEUR/
t ENTREE
LIGNE-2*2
PERITEL
VMC-2121HG PERITEL cable (not supplied)
: Signal flow
How to connect to a stereo system
(SLV-SE800B only)
Connect the ENTREE LIGNE-2 AUDIO G/D jacks on this VCR to the audio output
jacks on the stereo system, using the RK-C510HG audio cable. (not supplied).
Notes
•
•
•
Make sure you connect the plugs to jacks of the same colour.*1
If the other VCR is a monaural type, leave the red plugs unconnected.
If you connect this VCR to both the ENTREE LIGNE and SORTIE LIGNE jacks of the other
VCR, select the input correctly to prevent a humming noise.
•
•
If the other VCR does not have a PERITEL connector, use the VMC-2106HG cable instead
and connect the cable to the line out jacks of the other VCR.
When you connect another VCR to the DECODEUR/ENTREE LIGNE-3 *1 (or
DECODEUR/ENTREE LIGNE-2*2) connector, set DECODEUR/LIGNE3*1 (or
DECODEUR/LIGNE2*2) to LIGNE3*1 (or LIGNE2*2) in the OPTIONS-2 menu.
*1 SLV-SE800B only
*2 SLV-SE600B, SE700B, and SX700B only
82 Connecting to a VCR or stereo system
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic editing
(when recording on this VCR)
Before you start editing
z ENR
• Turn on your TV and set it to the video
channel.
• Press CHOIX ENTREE to display the
connected line in the display window.
• Press SP/LP to select the tape speed, SP or LP.
X
• On this VCR, set MONTAGE to OUI in the
OPTIONS-1 menu. If the other VCR has a
similar function, turn it on as well.
Insert a source tape with its safety tab removed into the other (playback) VCR.
1 Search for the point to start playback and set it to playback pause.
Insert a tape with its safety tab in place into this (recording) VCR. Search for the
2 point to start recording and press X (pause).
Press z ENR on this VCR to set it to recording pause.
3
4
To start editing, press the X (pause) buttons on both VCRs at the same time.
To stop editing
Press the x STOP buttons on both VCRs.
Tip
•
To cut out unwanted scenes while editing, press X (pause) on this VCR when an unwanted
scene begins. When it ends, press X (pause) again to resume recording.
Note
If you start editing following the procedure above, the VCR won’t start recording with the
•
OPC function. To record a tape with the OPC function, press z ENR again during recording
pause in step 3 so the VCR analyses the tape. Then, press X (pause) after the OPC indicator
stops flashing to start recording. If you press X (pause) before the OPC indicator stops
flashing, the OPC function is cancelled.
Basic editing 83
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio dubbing
(SLV-SE800B only)
This feature lets you record over the normal
audio track. The monaural sound previously
recorded is replaced while the original hi-fi
sound remains unchanged. Use this feature
to add commentary to a tape that you have
recorded with a camcorder.
Before you start
• Open the ENTREE LIGNE-2 AUDIO G/D
jacks cover on the front panel and connect
a playback source.
ANNUL/0
• Turn on the TV and set it to the video
channel.
1
4
7
2
5
8
0
3
6
9
DOUBLAGE SON
ENTREE LIGNE-2
X
Insert a source tape into your stereo system (or the playback VCR).
1 Search for the point to start playback and set it to playback pause.
Insert a prerecorded tape with its safety tab in place into this (recording) VCR.
2 Search for the start of the section to be replaced and press X (pause).
The VCR enters pause mode.
Press DOUBLAGE SON.
3
The programme position changes to “L2,” and the indicator appears in the
display window.
84 Audio dubbing (SLV-SE800B only)
Download from Www.Somanuals.com. All Manuals Search And Download.
To start editing, press the X (pause) buttons on this VCR and the stereo system
4 (or other VCR) at the same time.
After you use this feature, the audio in playback mode is automatically set to
monaural.
To stop editing
Press x STOP on this VCR and the stereo system (or other VCR).
To listen to both the hi-fi and normal audio
listen to dubbed audio over the original hi-fi audio. When MIX AUDIO is set to OUI,
the CHOIX SON button does not function.
Remember to reset MIX AUDIO to NON after playing the tape.
Note
•
If you eject the tape or turn the VCR off, MIX AUDIO is automatically set to NON.
Audio dubbing (SLV-SE800B only) 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest Sony
service facility.
Symptom
Remedy
The ?/1 MARCHE/
VEILLE switch does not
function.
•
Connect the mains lead to the mains securely.
The power is turned on but
the VCR does not operate.
•
•
Moisture condensation has occurred. Turn the power off, unplug
the mains lead and leave the VCR to dry for over three hours.
The VCR is plugged in but
the display window remains
dark.
The clock has stopped and
“–:– –” appears in the
display window.
•
The clock stops if the VCR is disconnected from the mains for
more than one hour. Reset the clock (and timer).
The playback picture does
not appear on the TV
screen.
•
•
Make sure the TV is set to the video channel. If you are using a
monitor, set it to video input.
If the VCR is connected to the TV with the PERITEL cable, make
sure the MAGN indicator is lit in the display window. Use the t
TV/MAGN button on the remote commander to light up the
MAGN indicator.
The picture is not clear.
•
•
If your TV is connected to the VCR with both PERITEL and aerial
Existing broadcasts may interfere with the VCR. Reset the RF
channel output of your VCR.
•
•
Adjust the tracking with the ALIGNEMENT +/– buttons.
The video heads are dirty (see the last page of Troubleshooting).
Clean the video heads using the Sony T-25CLD, E-25CLDR, or T-
25CLW video head cleaning cassette. If these cleaning cassettes
are not available in your area, have the heads cleaned at your
nearest Sony service facility (a standard service charge will be
required). Do not use a commercially available liquid type
cleaning cassette other than Sony’s, as it may damage the video
heads.
•
•
The video heads may have to be replaced. Consult your local Sony
service facility for more information.
The picture rolls vertically
during picture search.
Adjust the vertical hold control on the TV or monitor.
The picture has no sound.
•
•
The tape is defective.
If you made A/V connections, check the audio cable connection.
The sound is unstable or has
an echo.
•
When you play a tape with the same sound recorded on both the
hi-fi and normal audio tracks, make sure MIX AUDIO in the
OPTIONS-1 menu is set to NON.
86 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
No TV programme appears
on the TV screen.
•
•
•
•
Make sure the TV is set to the video channel. If you are using a
monitor, set it to video input.
If your TV is connected to the VCR with both PERITEL and aerial
Existing broadcasts may interfere with the VCR. Reset the RF
channel output of your VCR.
Select the correct source with the CHOIX ENTREE button. Select
a programme position when recording TV programmes; select line
input when recording from other equipment.
TV reception is poor.
•
•
•
Make sure the aerial cable is connected securely.
Adjust the TV aerial.
Make sure NORME (L or B/G) in the REGLAGE DES CHAINES
menu is set to the same system used in your local area.
The tape starts playing as
soon as it is inserted.
•
•
•
The safety tab has been removed. To record on this tape, cover the
The tape is ejected when
you press z ENR.
The safety tab has been removed. To record on this tape, cover the
Nothing happens when you
Make sure the tape is not at its end.
press z ENR.
The timer does not operate.
•
•
•
•
•
•
•
•
•
Check that the clock is set.
Make sure a tape has been inserted.
Check that the safety tab has not been removed.
Make sure the tape is not at its end.
Make sure a programme has been set for timer recording.
Make sure your timer settings are past the current time.
Check that the decoder is turned on.
Check that the satellite tuner is turned on.
The clock stops if the VCR is disconnected from the mains for
more than one hour. Reset the clock and timer.
•
•
Turn the power off and unplug the mains lead.
The SHOWVIEW menu or
the MINUTERIE menu
does not appear.
Check that OPTIONS PROGRAMM. in the OPTIONS-2 menu is
The VPS/PDC function
does not operate properly.
•
•
Check that the clock and the date are set correctly.
Check that the VPS/PDC time you set is the correct one (there
might be a mistake in the TV programme guide). If the broadcast
you wanted to record did not send the good VPS/PDC information,
the VCR will not start recording.
•
If the reception is poor, the VPS/PDC signal might be altered and
the VCR might not start recording.
continued
Troubleshooting 87
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
The ENR SYNCHRO
button turns off while
recording or does not go
back to recording standby
mode.
•
The tape has reached its end. Insert a new tape and press ENR
SYNCHRO again.
The Synchronized
Recording function does not
work.
•
The connected equipment was not turned off.
Turn off the connected equipment and press ENR SYNCHRO
again.
•
•
There was a power failure. Press ENR SYNCHRO again.
The programme recorded
with the Synchronized
Recording function is
incomplete.
If the settings for timer recordings and Synchronized Recording
overlap, the programme that starts first has priority and the second
programme starts recording only after the first programme has
finished.
•
•
There was a power failure. Press ENR SYNCHRO again.
You cannot set the channel
as the Canal Plus in the
REGLAGE DES CHAINES
menu.
Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in
You cannot watch the Canal
Plus programme when the
VCR is in standby mode.
•
•
Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in
Make sure the Canal Plus Scart cable is plugged securely.
The Canal Plus programme
is always recorded
scrambled.
•
•
Make sure the Canal Plus Scart cable is plugged securely.
Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in
•
Check that this channel is set as Canal Plus in the REGLAGE DES
88 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
A tape cannot be inserted.
•
•
Check that a tape isn’t already in the tape compartment.
The remote commander
does not function.
Make sure you are pointing the remote commander at the remote
sensor on the VCR.
•
Replace all the batteries in the remote commander with new ones
if they are weak.
•
•
Make sure the [TV] / [MAGN] remote control switch is set correctly.
The selected input line
connector number does not
appear in the display
window.
Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in
the OPTIONS-2 menu is set to LIGNE3 (or LIGNE2) (see page
79).
The SMARTLINK function
does not work.
•
•
Check that your TV complies with SMARTLINK, MEGALOGIC,
EASYLINK, Q-Link, EURO VIEW LINK, or T-V LINK.
Make sure you use the PERITEL cable to connect the VCR and
your TV.
•
•
Make sure the PERITEL cable is connected securely.
The tracking meter does not
appear on the TV screen.
The recording condition of the tape is very poor and tracking
cannot be adjusted.
•
•
•
•
The tracking meter does not appear when playing back an NTSC-
recorded tape.
You cannot control other
TVs.
Set your TV’s code number. The code number may change when
you replace the batteries of the remote commander.
The display window
becomes dim.
The display window automatically becomes dim when the VCR is
in standby or timer recording mode.
The VCR needs to be
cleaned.
Clean the cabinet, panel and controls with a dry, soft cloth, or a
soft cloth slightly moistened with a mild detergent solution. Do
not use any type of solvent, such as alcohol or benzene.
Symptoms caused by contaminated video heads
• Normal picture
• Rough picture
• Unclear picture
• No picture (or
black & white
screen appears)
initial
terminal
contamination
Troubleshooting 89
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
ENTREE AUDIO, phono jack (2)
Input level: 327 mVrms
System
Channel coverage
SECAM (L):
VHF F2 to F10
Input impedance: more than 47 kilohms
SORTIE AUDIO (SLV-SE700B, SX700B, SE800B)
Phono jack (2)
UHF F21 to F69
CATV B to Q
HYPER S21 to S41
PAL (B/G):
Rated output level: 327 mVrms
Load impedance: 47 kilohms
VHF E2 to E12
Output impedance: less than 10 kilohms
VHF Italian channel A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
RF output signal
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
21 W
UHF channels 21 to 69
Aerial out
Operating temperature
75-ohm asymmetrical aerial socket
Tape speed
5° C to 40° C
Storage temperature
–20° C to 60° C
SP: PAL
NTSC
SECAM
23.39 mm/s (recording/playback)
33.35 mm/s (playback only)
23.39 mm/s (recording/playback)
Dimensions including projecting parts and controls
Approx. 430 × 100 × 283 mm (w/h/d) (SLV-SE600B,
SE700B, SX700B)
MESECAM 23.39 mm/s (playback only)
LP: PAL
11.70 mm/s (recording/playback)
16.67 mm/s (playback only)
Approx. 430 × 100 × 290 mm (w/h/d) (SLV-SE800B)
Mass
NTSC
SECAM
11.70 mm/s (recording/playback)
Approx. 4.3 kg (SLV-SE600B, SE700B, SX700B)
Approx. 4.4 kg (SLV-SE800B)
MESECAM 11.70 mm/s (playback only)
EP: NTSC 11.12 mm/s (playback only)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Fast-forward and rewind time
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Approx. 1 min. (with E180 tape)
Inputs and outputs
Design and specifications are subject to change without
notice.
i LIGNE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
DECODEUR/t ENTREE LIGNE-2 (SLV-SE600B,
SE700B, SX700B)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
DECODEUR/t ENTREE LIGNE-3 (SLV-SE800B)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
ENTREE LIGNE-2 (SLV-SE800B)
ENTREE VIDEO, phono jack (1)
90 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to parts and controls
Refer to the pages indicated in parentheses ( ) for details.
Front panel
SLV-SE800B
B Tape compartment
N CHAINE (programme)/ALIGNEMENT
O REGLAGE AUTO (Auto Set Up)/REGL
CANAL (RF (Radio Frequency)
Q ENR SYNCHRO (Synchronized
Recording) button (66)
S ENTREE LIGNE-2 G (left) D (right)
continued
Index to parts and controls 91
Download from Www.Somanuals.com. All Manuals Search And Download.
SLV-SE600B, SE700B, SX700B
B Tape compartment
K CHAINE (programme)/ALIGNEMENT
L REGLAGE AUTO (Auto Set Up)/REGL
CANAL (RF (Radio Frequency)
* not available on SLV-SE600B
92 Index to parts and controls
Download from Www.Somanuals.com. All Manuals Search And Download.
Display window
STEREO SP VIDEO VPS SMARTLINK
NICAM LP
EP
PDC OPC
TV
H SMARTLINK indicator*1 (11)
I TV indicator*1 (47)
J Audio dubbing indicator*2 (84)
L Time counter/clock/line/programme
F VPS (Video Programme System)/PDC
(Programme Delivery Control)
indicator*1 (55)
G OPC (Optimum Picture Control)
indicator (76)
*1 not available on SLV-SE600B
*2 SLV-SE800B only
continued
Index to parts and controls 93
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
D AERIAL OUT
B DECODER/t LINE-2 IN
DECODEUR/t ENTREE LIGNE-2
E i LINE-1 (TV)
F AUDIO OUT R (right)/L (left)
DECODER/t LINE-3 IN
DECODEUR/t ENTREE LIGNE-3
SORTIE AUDIO D/G jacks*3 (12)
C AERIAL IN
*1 SLV-SE600B, SE700B, and SX700B only
*2 SLV-SE800B only
*3 not available on SLV-SE600B
94 Index to parts and controls
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote commander
D ×2 button*1 (62)
E y RALENTI (slow) button*1 (62)
F SP (Standard Play)/LP (Long Play)
button (45)
G
AFFICH (display) button (45)
1
4
7
2
5
8
0
3
6
9
m
M
1
2
*
*
FASTEXT buttons (for TV) (not available on
SLV-SE600B)
not available on SLV-SE600B
continued
Index to parts and controls 95
Download from Www.Somanuals.com. All Manuals Search And Download.
M [TV] / [MAGN] (TV/video) remote control
switch (5)
O COMPT/DUREE REST (counter/
remain) button (45)
P a TV power on/TV mode select
Q ./> RECHER INDEX (index
search) buttons*1 (75)
1
4
7
2
5
8
0
3
6
9
U CHOIX ENTREE (input select) button
c/C Teletext page access buttons*2
W
1
*
*
FASTEXT buttons (for TV) (not available on
SLV-SE600B)
not available on SLV-SE600B
2
96 Index to parts and controls
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to parts and controls 97
Download from Www.Somanuals.com. All Manuals Search And Download.
98 Index to parts and controls
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to parts and controls 99
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
L
S
Acces Smart 72
Adjusting
Language selecting 18
LP mode 45
Safety tab 46
Searching
at various speeds 61
using the Acces Smart
function 72
using the index function 75
tracking 76
M
Aerial hookup 9
AFT (Auto Fine Tuning) 23
Audio dubbing 84
Audio track 71
Auto Clock Set 34
Auto Long Play 79
Auto Set Up 16
Monaural 70
Monitoring
ShowView
recording 53
SMARTLINK
during playback 71
during recording 70
Automatic Power Off 11
N
One Touch Menu 11
One Touch Timer 11
Preset Download 11
NICAM broadcasts 70
Normal audio track 71
C
Canal Plus 36
Changing the programme
position 25
Changing the station name 29
Cleaning the video heads 86
Clock setting 31
O
SP mode 45
Stereo 70
Synchronized Recording 65
OPC (Optimum Picture
Control) 76
Optional setting 78
T
P
Colour system
Timer setting 57
compatible colour systems
PDC (Programme Delivery
Control) 55
cancelling 68
setting 42
Connecting
changing 68
checking 68
PERITEL connection 10
Adjusting
to a satellite tuner 12
to a stereo system 12
to a TV with a PERITEL
connector 10
using the Dial Timer 48
using the ShowView
system 53
Playback 41
at various speeds 61
frame-by-frame 62
selecting the sound 71
slow motion 62
Adjusting
Counter 42
Power save 79
D
Presetting channels 20
V
Demonstration 52
Dial Timer 48
Disabling the programme
positions 27
R
VPS (Video Programme
System) 55
Reality Regenerator 76
Recording 44
Z
bilingual programmes 70
duration time 64
saving 46
ZWEITON broadcasts 70
E
stereo programmes 70
timer setting 57
Editing 81
EP mode 43
using the Dial Timer 48
using the ShowView
system 53
what you are watching on
the TV 47
H
Hi-fi audio track 71
I
while watching another
programme 45
Index search 75
Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|