4-439-019-12(1)
Head
Mounted
Display
Reference Guide
Before Initial Use
Refer to the “Startup Guide” for instructions on
connecting the system, wearing the unit, and completing
initial settings.
HMZ-T2
Download from Www.Somanuals.com. All Manuals Search And Download.
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
If you have any questions about this
product, you may call: Sony
Customer Information Center
1-800-222-SONY (7669) or
below is for the FCC related matters
only.
The following FCC statement applies
only to the version of this model
manufactured for sale in the U.S.A.
Other versions may not comply with
FCC technical regulations.
Regulatory Information
NOTE:
Declaration of Conformity
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
Trade Name:
Model No.:
SONY
HMZ-T2
Responsible Party: Sony Electronics Inc.
Address:
16530 Via Esprillo, San
Diego, CA 92127 U.S.A.
858-942-2230
Telephone No.:
This device complies with Part15 of the FCC Rules.
Operation is subject to the following two
conditions.: (1)This device may not cause harmful
interference, and (2)this device must accept any
interference received, including interference that
may cause undesired operation.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
Notice for customers in Canada
THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Notice for customers in the United
Kingdom
A molded plug complying with BS1363 is fitted to
this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be
replaced, a fuse of the same rating as the supplied one
and approved by ASTA or BSI to BS1362, (i.e.,
– Consult the dealer or an experienced radio/TV
technician for help.
marked with
or
mark) must be used.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse cover
after you change the fuse. Never use the plug without
the fuse cover. If you should lose the fuse cover,
please contact your nearest Sony service station.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice for customers: the following
information is only applicable to
equipment sold in countries applying
EU directives.
This product has been manufactured by or on behalf
of Sony Corporation, 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan. Inquiries related to product
compliance based on European Union legislation
shall be addressed to the authorized representative,
Sony Deutschland GmbH, Hedelfinger Strasse 61,
70327 Stuttgart, Germany.
Health Precautions
Age Limitations
Watching video images or playing games by
this device may affect the health of growing
children. This device should not be used by
children 15 and under.
Use password protection feature (page 26) of
this device to restrict children from using
this device.
For any service or guarantee matters, please refer to
the addresses provided in the separate service or
guarantee documents.
This equipment has been tested and found to comply
with the limits set out in the EMC Directive using a
connection cable shorter than 3 meters.
Watching Video with the Head Mounted
Display
Disposal of Old Electrical
& Electronic Equipment
(Applicable in the
European Union and other
European countries with
separate collection
systems)
• Some people may experience discomfort (such
as eye strain, fatigue, nausea, or motion
sickness) while watching video images or
playing games. Sony recommends that all
viewers take regular breaks while watching
video images or playing games. The length and
frequency of necessary breaks will vary from
person to person. You must decide what works
best. If you experience any discomfort, you
should stop watching the video images or
playing games until the discomfort ends;
consult a doctor if you believe necessary.
• Avoid wearing the unit in environments where
your head may shake, or while you are walking
or performing exercise, because there is a
higher possibility that you experience
discomfort.
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. The
recycling of materials will help to conserve natural
resources. For more detailed information about
recycling of this product, please contact your local
Civic Office, your household waste disposal service
or the shop where you purchased the product.
• You should also review (i) the instruction
manual of any other device or media used with
this device and (ii) our website below for the
latest information.
For customers in Europe, Russia, Ukraine
and UK:
For customers in the U.S.A. and Latin
America:
For customers in Canada:
For customers in China:
For customers in other countries/regions:
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct Use
• Ensure that you are wearing the head mounted
unit correctly.
– For instructions on wearing the unit, refer to
the “Startup Guide.”
Precautions
– To avoid watching with the screens skewed,
check screen alignment by referring to the
confirmation screen displayed initially.
– Note that dropping the unit or handling it
roughly may skew the screens.
Power Supply
Position the system near the wall outlet (mains)
used. In case of strange noises, fumes, or smoke
from the system, immediately unplug the AC
power cord (mains lead) to turn all power off.
Only pressing the power button on the head
mounted unit will not turn the system off
completely.
• The head mounted unit can be adjusted in a
1
7
range of 55 mm – 72 mm (2 / in. – 2 / in.) to
4
8
suit the distance between your eyes
(interpupillary distance). If you cannot use the
system within this range, refrain from using the
system.
• By default, a warning message for automatic
shutdown will be displayed after three hours of
continuous viewing. If you clear the message
and continue watching, the system will
automatically turn off after another 3 hours.
Installation Environment
Avoid installation in the following environments.
• Places subject to vibration
• In direct sunlight, or where it is very hot or
humid
• Places that are extremely cold
Also avoid putting liquid-filled containers (such
as flower vases) on top of the processor unit, or
using the system where it may be splashed. The
system may be damaged if splashed with water.
For Comfortable Viewing
Images are perceived as appearing some distance
from the viewer.
If you normally wear glasses or contact lenses,
wear them as usual during use (with the exception
of reading glasses). Note that watching with
bifocals may be less than optimal.
Condensation
Condensation occurs when moisture in the air
condenses on metal panels or other parts, forming
droplets. Condensation may form on outer
surfaces or internally if the system is suddenly
moved from a cold to a warm environment, or
when a heater is turned on in a cold room where
the system is installed. If condensation forms, do
not use the system until the droplets evaporate.
• If the system is not plugged into a wall outlet
(mains)
Leave the system unplugged, and wait until the
droplets evaporate.
• If the system is not on
Leave the system off, and wait until the droplets
evaporate.
• If the system is on
Leave the system on, and wait until the droplets
evaporate.
Using the system when condensation has formed
may damage it.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Lens Care
HDMI Jacks and Connectors
• Handle the lenses on the head mounted unit
carefully to avoid smears or scratches. If the
lenses become dirty, wipe them gently with a
soft lens-cleaning cloth.
• Do not use liquid solutions, such as lens-
cleaning fluid, water, or alcohol-based cleaners.
Take these precautions to avoid damaging HDMI
jacks and connectors.
• When inserting cables, note the shape and
orientation of the connector and the HDMI jack
on the back of the processor unit.
HDMI input and output
Cleaning the System
Clean outer surfaces of the system using a soft
cloth lightly moistened with a mild detergent. Do
not use solvents, such as thinner, benzine, or
alcohol, which may damage surfaces.
The connector is upside-down
HDMI input and output
Headphone Care
• A dirty headphone plug may cause static or
skipping. To ensure optimal sound, clean the
plug with a soft cloth occasionally.
• Also clean the earbuds. Remove the earbuds
from the headphones and hand-wash them
using a mild detergent. After washing, dry the
earbuds thoroughly before use.
The connector is not straight
• Before moving the processor unit, always
disconnect the HDMI cable.
Extended Listening at High Volume
Listening at high volume over extended periods
may harm hearing. To protect your hearing, avoid
listening at excessive volume.
• When connecting or disconnecting HDMI
cables, hold the connector straight. Do not hold
the connector at an angle or force it into the
HDMI jack.
• Use either the supplied HDMI cable or a
commercially available High-Speed HDMI
cable.
Initial Volume
To avoid sudden loud output, keep the initial
volume low. Increase the volume gradually until
the desired level is reached.
Packaging Materials
Keep the original box and protective cushioning
for future use, in case you move or need to ship
the system for repair or other reasons.
Head Mounted Unit Cord Handling
Take these precautions to avoid damaging the
HMD OUT jack or cord connector.
• When inserting the connecting cord, note the
shape and orientation of the connector and the
HMD OUT jack on the front of the processor
unit.
• Before moving the processor unit, always
disconnect the connecting cord.
• When connecting or disconnecting the
connecting cord, hold the connector straight.
Do not hold the connector at an angle or force it
into the HMD OUT jack.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Headphone Handling
• If you experience an allergic reaction to the
supplied headphones, stop using them at once
and contact a doctor.
• When you unplug the headphones from the
head mounted unit, make sure to hold the
headphone plug to unplug it. Pulling by the
headphone cord itself may damage it.
• Earbuds may deteriorate after extended use or
storage.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Fitting the Head Mounted Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Confirming Screen Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
License and Trademark Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Highlights
Supplied Accessories
Wearing the head mounted display, you can
watch 3D movies and play 3D games from
connected Blu-ray Disc™ player and game
consoles.
Make sure the following items are included
with the system after purchase. If any items
are missing, contact your Sony dealer or a
local authorized Sony service center.
Product highlights are as follows.
• AC power cord (mains lead) (1)
Use the supplied AC power cord (mains
lead) only with this system, not with other
electronics.
• Enjoy video with impact, simulating the
big-screen cinematic experience through a
wide 45° horizontal field of view.
• Watch high-contrast, high-definition
video produced by Sony HD OLED
(Organic Light-Emitting Diode) panels in
the head mounted unit.
• HDMI cable (1)
• Connect the system to 3D-compatible
equipment for a realistic 3D viewing
experience. Simultaneous display on both
OLED screens eliminates the cross-talk
(double images) that older systems with
alternating images are susceptible to.
• Hear immersive multi-channel virtual
surround-sound with depth, produced by
the headphones and Virtualphones
Technology (VPT).
• Light blocker (Top) (1 each for the left
and right)
• Enjoy more immersive gameplay with
accurate sound localization by listening in
Game mode, which produces a soundstage
specifically designed for games with
multi-channel surround-sound effects.
Game mode soundstage design for this
system was supervised by sound designers
at Sony Computer Entertainment.
• Light blocker (Bottom) (1)
• Connecting cord holder (1)
• Forehead supporter cover (1)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
• Headphones (1)
• Earbuds (Size S, L) (1 pair for each size)
Medium-sized earbuds are initially
attached, at the time of purchase.
• Reference Guide (this guide)
• Startup Guide
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts and Controls
Head Mounted Unit
Forehead supporter
Headband strap
release button
Top headband strap
Bottom headband
strap
Illumination
Headband strap release button
1 (Power On/
Standby) button
VOL +/– buttons
Control buttons (v/V/
b/B, MENU*)
Lens span adjusters
* The MENU button serves two purposes.
Press the MENU button to view setting menus as well as to
confirm setting changes (when it functions as an Enter
button).
Headphone jack* Forehead supporter lock lever
Connecting cord
Lenses
* Either the supplied headphones or your
own stereo mini-plug headphones can
be connected.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Processor Unit (Front)
HMD OUT jack (HMD Output)
Insert the connecting cord of the
head mounted unit.
PASS THROUGH indicator
Power indicator
Lit in amber when HDMI
pass-through is used.
Lit in green when the system is
on, and lit in red in standby mode.
Processor Unit (Back)
HDMI IN jack HDMI OUT jack
(HDMI Input) (HDMI Output)
AC IN terminal
Note
• Source signals cannot be passed through
the HDMI OUT jack until the HDMI pass-
Mount system is turned off.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitting the Head Mounted Unit
The head mounted unit can be adjusted in several ways to ensure a personalized, comfortable
fit. For a more comfortable fit, always adjust the head mounted unit before putting it on.
1 Adjusting the forehead supporter
The forehead supporter can be adjusted
back and forth in a range of four positions to
change the point of contact with your
forehead. Adjust the forehead supporter for
a good fit accounting for sharp image focus,
no contact with your nose, ample space
between your glasses and the unit, and so
on.
To move the forehead supporter forward, as you
hold the forehead supporter lock lever toward the
left, push the supporter forward, keeping the
supporter lifted up.
Attach the forehead supporter cover as desired.
Attach the included cover
to the forehead
supporter.
To move the forehead supporter backward, simply
pull the supporter toward the back.
Note
• Make sure the forehead supporter fits securely,
so that it stays in contact with your forehead
during viewing. If the unit detects that the
forehead supporter is not against your forehead
during viewing, the screens will automatically
turn off.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Light blocker
If external light reflected on the screens is
distracting, attach the light blockers.
3 Attaching the connecting cord holder
To keep the connecting cord of the head
mounted unit out of the way, use the
supplied connecting cord holder and attach
the connecting cord to the lower headband
strap.
Connecting cord
holder
Light blocker (Top)
The upper-left light blocker is labeled “L,” and the
upper-right one, “R.” Attach the correct top light
blocker on each side by pushing the tabs into the
two holes on the top of the lens section.
Hook for bottom
headband strap
Hook for connecting
cord
Light blocker (Bottom)
Attach the bottom light blocker by pushing the tabs
into the four holes on the bottom of the lens section
and the two holes on the side before wearing the
unit.
Notes
• It may not be possible to attach the light
blockers when wearing some sorts of glasses.
• If external light is still distracting with the light
blockers on, dim the room lights or move away
from external light.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
For a Comfortable Fit
• When loosening the straps, make sure that
you can still see the guide lines on the
straps. If a guide line is no longer visible,
the strap may come out of the fastener.
Have the weight of the head mounted unit
balanced between your forehead and the
back of your head
Forehead
supporter
Lower
headband
strap
Wear the head mounted unit so that it feels
balanced between the forehead supporter
and lower headband strap, and after
repositioning it to bring the lenses in front
of your eyes, make sure it fits securely.
Be sure to leave a space between the bridge
of the head mounted unit (between the
lenses) and your face, so that the unit does
not touch your nose.
Ensure a secure fit
To loosen
To tighten
If either headband strap is too loose or too
tight, adjust the strap length for a better fit.
To loosen, hold down the fastener button as
you pull the right end of the strap out a
little.
To tighten, push the right end of the strap in
a little.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
To attach an earbud
Attaching and Replacing
Earbuds
Twist the earbud as you push the colored inner
part over the headphone stem, until the stem is
fully covered.
Bass may be inaudible unless earbuds fit
well. For a better listening experience, try a
different earbud size or adjust the position
of the earbuds, so that they fit perfectly in
your ears.
Medium-sized earbuds are initially attached
to the headphones, at the time of purchase.
If the earbuds feel uncomfortable, try
replacing them with the supplied large or
small earbuds. Earbud sizes are color-coded
and can be identified by the color inside.
To avoid having the earbuds come off in
your ear, be sure to attach earbuds securely
to the headphones when replacing them.
Replacing Consumables
The following replacement parts are
available.
• Earbuds*
• Forehead supporter cover
• Light blocker (Top) (1 each for the left
and right)
Earbud sizes (inside color)
• Light blocker (Bottom)
• Connecting cord holder
When these consumables break or show
signs of wear, consult your nearest Sony
dealer or Sony service center.
Colored parts
Small
?
Large
(Light blue)
* Purchase small, medium, or large earbuds as
needed.
S
M
L
(Orange)
(Green)
To detach an earbud
While holding the headphone securely, twist the
earbud as you pull it off.
Tip
• If the earbud slips in your fingers and remains
attached, try holding it with a dry cloth for a
better grip.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Confirming Screen Alignment
Confirm screen alignment by referring to the confirmation screen displayed initially after lens
span adjustment. Screens on the head mounted unit are described below, with an explanation
of how to confirm alignment.
The display section of the head mounted unit consists of two small screens, on the left and
right. Images on each screen overlap to form a single image.
Always check screen alignment by referring to the confirmation screen before use to make sure
the screens are aligned properly.
Left image
Right image
Image perceived with both eyes
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct Display
For correct display, slide the lens span adjusters as needed so that all three “I” marks and the
horizontal line intersect.
It is acceptable if the “I” marks and the horizontal line intersect in a position other than the
center of the screen.
Incorrect Display
If even one of the “I” marks and the horizontal line do not intersect, the head mounted unit may
have been bent out of shape, or it may be damaged. If this condition occurs, contact your
nearest Sony dealer or local authorized Sony service center.
“I” marks and the horizontal line
do not intersect.
The horizontal line appears to
be extremely slanted.
The middle “I” mark does not
intersect the horizontal line.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
System Settings
Setting menus can be accessed at any time to change or adjust a variety of system settings, such
as video picture quality, audio output format, and 3D display format. To view the menus, press
the MENU button on the head mounted unit.
A Setting category icons
B Category
Basic Menu Operations
1 Press the MENU button on the head
C Setting menu
D Current settings in each menu
mounted unit.
E Summary of the selected menu
2 Press the v/V button to select the
desired setting category icon, and
Note
then press the MENU button.
• After 90 seconds of inactivity, the setting menu
will automatically close.
3 Press the v/V button to select the
desired menu, and then press the
MENU button.
Tips
• To return to the previous menu, press the b
button.
• To exit the setting menu, press the b button in
the setting category icon menu.
4 Press the v/V/b/B buttons to
change or adjust settings as needed,
and then press the MENU button to
enter your changes.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Menus
Default settings are underlined.
Information
Identifies input signals (video and audio signals) from the equipment connected to the
processor unit. “Unsupported signal” indicates that the input signal is incompatible with the
system, and “No signal” is shown when no signals are input.
Lens span adjustment
Back
Returns to the previous menu.
Lens span
adjustment
Adjusts the lens span of the head mounted unit to match the
distance between your eyes (interpupillary distance), for an
optimal viewing experience. Use the lens span adjusters on the
head mounted unit for adjustment. For details, refer to the
“Startup Guide.”
Notes
• Without the lens span adjusted correctly, you cannot enjoy an optimal
viewing experience. Always adjust the lens span before use.
• Audio is muted during adjustment.
• The volume cannot be changed during adjustment.
3D Settings
Back
Returns to the previous menu.
Reset
Resets all “3D Settings” items to the original default values.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
3D Display
Manually select the display format for 3D content. Available
settings vary depending on whether the source signal includes a
3D format identification signal, as follows.
Example of 3D display
For 3D content without a 3D format identification
signal
Side-by-Side: Select for side-by-side 3D content, with similar
images displayed side by side.
Off: Select to display content in 2D format.
Over-Under: Select for top-and-bottom 3D content, with
similar images displayed on top and bottom.
For 3D content with a 3D format identification signal
On: Select to display content in 3D format.
Off: Select to display content in 2D format.
Notes
• If 3D content is not displayed correctly using the selected settings, try
changing “Side-by-Side” to “Over-Under” or vice-versa.
• When selecting “Side-by-Side” or “Over-Under,” change the setting to
“Off” after viewing 3D content.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto 3D
On: Automatically switches to 3D display mode when a 3D
format identification signal is detected. If the 3D format
identification signal is no longer detected, the system will
automatically switch to 2D display mode.
Off: Deactivates this function.
Note
• If images do not appear in 3D when “Auto 3D” is set to “On,” try
changing the “3D Display” setting.
3D Signal
Notification
On: Notifies you when a 3D format identification signal is
detected.
Off: Deactivates this function.
Display
Back
Returns to the previous menu.
Picture Mode
Vivid: Vivid colors and sharp contrast, for concerts, sports, and
other televised content.
Standard: Emphasizes a natural picture. Standard picture
quality for a variety of video sources.
Cinema: Picture quality designed especially for cinematic
content.
Game: Picture quality designed for games.
Custom: Stores your customized preferred picture quality,
adjusting from original flat picture.
Details of the “Picture
Mode” option you choose
here can be adjusted in the
settings from “Reset” to
“Contrast Remaster”
below.
Reset
Restores all the values (except for values of “24p True Cinema,”
“Wide Mode,” and “Overscan” in “Display”) of the selected
mode in the “Picture Mode” menu to the default settings when
selecting “Yes.”
Picture
Adjusts image contrast.
Brightness
Adjusts the brightness of the image.
Color
Adjusts image color temperature.
Temperature
Natural: Automatically optimizes color temperature for each
“Picture Mode,” based on characteristics of human vision.
Cool: Cool blue color tones.
Medium: Color tones between “Cool” and “Warm 1/Warm 2.”
Warm 1/Warm 2: Warm red color tones. “Warm 2” is redder
than “Warm 1.”
Sharpness
Enhances image edges to make images stand out, or smooths
edges for a softer effect.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Frame Noise
Reduction
Not available with
1080/24p frame packing
format.
Reduces random image noise, similar to static.
High/Medium/Low: Select the level of this effect.
Off: Deactivates this function.
Block Noise
Reduction
Not available with
1080/24p frame packing
format.
Reduces mosaic-like block noise in the image.
High/Medium/Low: Select the level of this effect.
Off: Deactivates this function.
Mosquito Noise
Reduction
Not available with
1080/24p frame packing
format.
Reduces faint “mosquito” noise around image edges.
High/Medium/Low: Select the level of this effect.
Off: Deactivates this function.
Panel Drive Mode Select the type of display method for image motion.
Normal: Standard image appearance.
Clear: Reduces blurring of fast-moving images.
Notes
• Although selecting “Clear” reduces blurring of fast-moving images, it
also darkens the screen as a whole. If this is distracting, select
“Normal.”
• The screen as a whole may appear to flicker, depending on the source
signal. If this is distracting, select “Normal.”
Cinema
Conversion
Auto: The system automatically detects whether you are
watching video content (such as TV dramas and
animation) or film content (movies) and switches to the
corresponding conversion method.
Video: The system always displays in a format for video
content, whether playing video or film content.
Available only when
“Picture Mode” is set to
“Cinema” or “Custom.”
Not available with
1080/24p frame packing
format.
Clear Black
Adjusts the appearance of dark image areas. Beautiful black
reproduction, without a loss of overall shading.
Contrast
Remaster
Automatically optimizes black and white levels, for good
contrast without faded blacks or whites.
High/Medium/Low: Select the level of this effect.
Off: Deactivates this function.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
24p True Cinema
On: Displays 24 fps video faithfully at 24 fps. Cinematic
content of this kind is available on Blu-ray disc. Provides
a viewing experience similar to that in theaters.
Off: Deactivates this function. 24 fps video signals are
displayed after upconversion to 60 fps.
Note
• Activating this function when “Panel Drive Mode” is set to “Clear”
may make the screen appear to flicker (depending on the source
signal), which may be distracting. In this case, either deactivate this
function or set “Panel Drive Mode” to “Normal.”
Wide Mode
Not available during 3D
playback.
Normal: Displays the images at the original 4:3 aspect ratio.
Full: Displays 4:3 content in full-screen, stretching the images
horizontally. 16:9 content is also displayed full-screen, at
the original aspect ratio.
Zoom: Enlarges the images vertically and horizontally,
preserving the original aspect ratio.
Note
• “Normal” is not available with HD input sources (1080i, 720p, or
1080p).
Overscan
Adjusts the display area.
Auto: Automatically adjusts the picture to the optimal display
Not available during 3D
playback.
area.
On: Hides image edges. Select in case of issues such as noise at
images edges.
Off: Displays the entire image.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
Back
Returns to the previous menu.
Reset
Resets all “Sound” settings to the original default values.
Surround
Standard: Standard acoustic setting, providing a spacious
soundstage for a range of content.
Cinema: Emphasizes a natural soundstage rivaling the
impressive acoustics of movie theaters, especially for
spoken dialog. Immersive, with each channel blended
naturally. A good choice for movies.
Game: Ideal for games. Provides pinpoint sound localization,
for a clear sense of where sounds originate. For
immersive gameplay in games with multi-channel
surround-sound effects. Especially suitable for games that
have a multi-channel soundtrack.
Music: Emphasizes detail and purity of source audio. Faithful
reproduction, similar to monitor equipment at recording
studios. A good choice for music.
Off: Deactivates surround-sound effects.
Note
• Volume may vary depending on the source audio signal and selected
surround-sound mode.
Treble
Bass
Adjusts high-frequency audio output.
Adjusts low-frequency audio output.
Harmonics Equalizer On: Retrieves the tail shape of the waveform which would
Not available with source
signals other than Dolby
Digital or AAC audio.
likely be omitted by audio compression algorithms due to
its low amplitude.
Off: Deactivates this function.
A/V SYNC
Corrects out-of-sync audio and video signals by delaying audio
output. Audio output can be delayed in 10-millisecond
increments, in a range of 0-100 ms.
Note
• Some out-of-sync audio and video cannot be corrected with this
function, depending on the source signal.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Type of Headphones Switches to the optimal virtual surround-sound setting for the
type of headphones used.
Inner Ear: Ideal for headphones worn in your ears, such as the
supplied headphones.
Overhead: Ideal for headphones worn over or on your ears.
Note
• Surround-sound effects may not be produced correctly unless this
setting matches the type of headphones used.
Dual Mono
Switches Dolby Digital or AAC dual mono audio source signals
to main or sub audio output.
Main: Both left and right headphone output consists solely of
the main audio content.
Sub: Both left and right headphone output consists solely of the
sub audio content.
Not available with source
signals other than Dolby
Digital or AAC dual mono
audio.
Main/Sub: Headphone output on one side consists of the main
audio content. Output on the other side consists of the sub
audio content.
General Setup
Back
Returns to the previous menu.
Set password
A password can be set to restrict use of the system. Once a
password is specified, it must be entered each time the system is
turned on.
To cancel password protection, select “Cancel password” and
enter the password.
The name of this setting
item changes to “Cancel
password” after your
password is entered.
Note
• The system automatically turns off in the following situations. Either
turn the system on and enter the password again or cancel password
protection.
– When the password is entered incorrectly, and you close the
displayed setting menu by using the MENU or b button
– After 90 seconds of inactivity on the password input screen
LPCM Multi-Ch.
Mode
On: Enables reception of multi-channel LPCM source signals
by the processor unit.
Off: Deactivates this function.
HDMI pass-through
On: Activates pass-through, enabling you to watch or listen to
content on a TV or other display device when the system
is in standby mode. For details, refer to the “Startup
Guide.”
Off: Deactivates this function. To save power, select “Off”
when a TV or other display device is not connected to the
processor unit.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Control for HDMI
On: Activates control for HDMI CEC (Consumer Electronic
Control)-compatible equipment connected to the
processor unit using the v/V/b/B buttons on the head
mounted unit.
v button: Starts playback.
V button: Pauses playback.
b button: Jumps to the previous chapter. Hold the
button down for fast-rewind.
B button: Jumps to the next chapter. Hold the button
down for fast-forward.
Off: Deactivates this function. Use the remote control of the
connected equipment to control it.
Note
• If control is not possible with this setting activated, the connected
equipment is not compatible with the system’s “Control for HDMI”
function. Control connected equipment directly.
Power off when
unmounted
On: Turns the system off automatically 30 minutes after you
take the head mounted unit off.
Off: Deactivates this function.
Tip
• Regardless of this setting, the screens will go off automatically
10 seconds after you remove the head mounted unit.
Illumination
On: Activates the illumination on the head mounted unit.
Off: Deactivates this function.
Language setting
Sets the language used for menus and other interface elements.
Notes
• Audio is muted while this setting is configured.
• The volume cannot be adjusted while this setting is configured.
Prolonged viewing
warning
On: Activates automatic display of a warning about whether to
turn the power off after 3 hours of continuous viewing.
Selecting “Yes” on the warning screen will turn the power
off. Selecting “No” will cause the power to be turned off
3 hours later, after 6 hours of continuous viewing.
Off: Deactivates this function.
Notes
• When the warning is displayed after 3 hours of viewing, if no response
is made in 90 seconds, the power will automatically be turned off.
• A warning screen will be displayed at 30 minutes and 5 minutes before
the system will turn itself off.
Startup viewer
warning
On: Activates automatic display of a startup warning.
Off: Deactivates this function.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset to factory
settings
Resets all settings to the original default values.
Note
• The password set in “Set password” (in “General Setup”) will also be
cleared.
Guide of HDMI device control
Displays the operation guide for head mounted unit buttons that can be used with “Control for
HDMI” function (page 27).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If the following symptoms occur when using the system, check the Cause/Action column
before requesting service. If the issue persists, contact your Sony dealer or local authorized
Sony service center.
Power Supply
Symptom
Cause/Action
The system does not turn
on
p Confirm that the AC power cord (mains lead) is fully plugged in.
p Make sure the head mounted unit connecting cord is fully
inserted in the HMD OUT jack.
p Startup normally takes a few seconds.
The system does not go off p Hold down the 1 (Power On/Standby) button for at least
one second.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Video
Symptom
Cause/Action
No video, or output video
is distorted
p Refer to the “Startup Guide” and confirm that the AC power cord
(mains lead), HDMI cable, and connecting cord of the head
mounted unit are connected correctly.
p Make sure that equipment connected to the HDMI IN jack on the
processor unit is on.
p Confirm that the source signal is supported by the system. For
information on supported signals, see “Supported HDMI input
p When the PlayStation 3 (PS3™) is used with this system and if
®
the video and audio output settings on the PS3™ do not match
those of this system or the cable and TV in use, there may be no
video and audio outputs. If such symptoms occur, turn off the
PS3™, and then turn it on again by pressing its power button for
at least 5 seconds until you hear a beep sound twice. The video
and audio output settings will automatically be reset to the
standard settings.
p If there is no video output when this system is used with
playback equipment other than the PlayStation 3 (PS3™),
®
momentarily stop playback, and then resume playback. If the
issue persists, try restarting the playback equipment.
p The HDMI cable may be loose. Confirm that the HDMI cable is
fully plugged in. If video quality does not improve, the HDMI
cable may be damaged. In this case, try a new cable.
p When selecting “Side-by-Side” or “Over-Under” in “3D
Display” (in “3D Settings”), change the setting to “Off” after
viewing 3D content (page 21).
p If equipment is connected to the processor unit via an AV
amplifier (receiver), try connecting the equipment directly to the
processor unit instead. For details, refer to the instruction manual
of the equipment used.
p When using an HDMI selector, make sure the input on the
selector is switched correctly.
p Use either the supplied HDMI cable or a commercially available
HDMI cable identified as a High-Speed cable.
p Make sure to disable video output with the Deep Color signal on
the connected equipment. If this option is not available on the
equipment and the content is being output at 1080/60p, change
the HDMI video output mode to 1080i video mode.
The screen is dark or
blurry
p Refer to the “Startup Guide” and confirm that the AC power cord
(mains lead), HDMI cable, and connecting cord of the head
mounted unit are connected correctly, and that you are wearing
the head mounted unit correctly.
Perform adjustment again by accessing “Lens span adjustment”
p If the lenses in the head mounted unit are dirty, wipe them with a
soft dry cloth to clean them.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause/Action
The screens suddenly go
off
p After 3 hours of continuous viewing, the system will display a
warning screen and go off after 90 seconds of inactivity. If you
clear the message and continue watching, the system will
automatically go off after another 3 hours to encourage healthy
viewing habits. For details, see “Prolonged viewing warning”
p Wear the head mounted unit correctly. 10 seconds after the
sensor in the head mounted unit detects that you have removed
the unit, the displayed screen will automatically go off. For
Image display dims over
time
p Although image display of photos or nearly motionless images
may dim over time, this does not indicate system damage. To
restore normal brightness, perform some operation on the head
mounted unit or the connected equipment directly.
Some pixels on the
screens are not lit, or some
pixels are always lit
p Although OLED panels are produced using extremely high-
precision manufacturing technologies, in some cases pixels may
be permanently black or lit in red, blue, or green. This does not
indicate system damage.
Some scenes on a Blu-ray
disc recorded at 24 fps
(matching the original
movie) look unnatural
p In this case, try activating “24p True Cinema.” For details, see
“24p True Cinema” (page 24).
The screen flickers
p Some source signals may cause the screen as a whole to appear to
flicker when “Panel Drive Mode” is set to “Clear,” or when “24p
True Cinema” is activated. For details, see “Panel Drive Mode”
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause/Action
Video is not shown in 3D
p If the same image is displayed side by side or on top and bottom,
the 3D display format setting may be incorrect. Try changing the
p 3D perception varies by viewer.
p If the “3D Settings” menu is displayed but images are not shown
in 3D, try restarting the connected equipment used for 3D
playback.
p The system does not support 2D to 3D conversion (simulated
3D).
p Viewing anaglyphic images in 3D requires anaglyphic glasses
(with red and blue lenses, for example).
p Also check the settings of playback equipment connected to the
processor unit.
p When the PlayStation 3 (PS3™) is used with this system and if
®
the video and audio output settings on the PS3™ do not match
those of this system or the cable and TV in use, there may be no
3D video output. If such symptoms occur, turn off the PS3™,
and then turn it on again by pressing its power button for at least
5 seconds until you hear a beep sound twice. The video and audio
output settings will automatically be reset to the standard
settings.
p If there is no 3D video output when this system is used with
playback equipment other than the PlayStation 3 (PS3™),
®
momentarily stop playback, and then resume playback. If the
issue persists, try restarting the playback equipment.
3D display is not activated
automatically
p Make sure the “Auto 3D” setting in “3D Settings” is set to “On”
p 3D content without a 3D format identification signal is not
automatically displayed in 3D. Try changing the “3D Display”
setting in “3D Settings” to “Side-by-Side” or “Over-Under”
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio
Symptom
Cause/Action
There is no sound /
There is static /
Volume cannot be
increased
p The headphone plug is not connected properly. If the headphones
are connected improperly, the sound from the headphones will be
impaired. Insert the headphone plug until it clicks into place
p The headphone plug is dirty. Clean the headphone plug with a
soft dry cloth.
p Adjust the volume using the VOL +/– buttons.
p Refer to the “Startup Guide” and confirm that the AC power cord
(mains lead), HDMI cable, and connecting cord of the head
mounted unit are connected correctly.
p Confirm that the source signal is supported by the system. For
information on supported signals, see “Supported HDMI input
signal is unsupported, check the audio output settings of
connected equipment.
p When the PlayStation 3 (PS3™) is used with this system and if
®
the video and audio output settings on the PS3™ do not match
those of this system or the cable and TV in use, there may be no
video and audio outputs. If such symptoms occur, turn off the
PS3™, and then turn it on again by pressing its power button for
at least 5 seconds until you hear a beep sound twice. The video
and audio output settings will automatically be reset to the
standard settings.
p If there is no video output when this system is used with
playback equipment other than the PlayStation 3 (PS3™),
®
momentarily stop playback, and then resume playback. If the
issue persists, try restarting the playback equipment.
p If equipment is connected to the processor unit via an AV
amplifier (receiver), try connecting the equipment directly to the
processor unit instead. For details, refer to the instruction manual
of the equipment used.
p When the system is connected to HDMI CEC-compatible home
theater systems or AV amplifiers (receivers), check the following
settings.
– Make sure the “Control for HDMI” setting in “General Setup”
– Make sure “Control for HDMI” is activated on the AV
amplifier (receiver) or other equipment. For details, refer to the
instruction manual of the equipment used.
p For multi-channel LPCM input, make sure the “LPCM Multi-Ch.
There is no surround-
sound effect
p Make sure the “Surround” setting in “Sound” is not set to “Off”
p Make sure the “Type of Headphones” setting in “Sound” is
correct for the type of headphones in use (page 26).
p Sound perception varies by listener.
There is no bass
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause/Action
There is no audio input in
Dolby Digital or AAC
format
p The playback equipment may be configured to convert Dolby
Digital or AAC audio output signals to LPCM signals. In this
case, in the playback equipment settings, disable Dolby Digital
or AAC conversion, and then resume playback. For details, refer
to the instruction manual of the equipment used.
Audio playback is not in
the right format
p For dual mono audio, change the “Dual Mono” setting in
connected equipment.
HDMI Control
Symptom
Cause/Action
Connected equipment
cannot be controlled using
the buttons on the head
mounted unit
p Make sure the connected equipment supports the HDMI CEC
functions.
p Make sure “Control for HDMI” setting of the connected
equipment is configured correctly. For details, refer to the
instruction manual of the equipment used.
p The connected AV amplifier (receiver) may not be compatible
with the system’s “Control for HDMI” function. “Control for
HDMI” function will not work correctly in this case.
p Controlling connected equipment by pressing buttons on the
head mounted unit may not be possible immediately after turning
the system on, or immediately after activating “Control for
HDMI” in “General Setup.”
p Make sure the “Control for HDMI” setting in “General Setup” is
Other Issues
Symptom
Cause/Action
The power indicator keeps
flashing in red
p If the indicator flashes twice every 3 seconds, the head mounted
unit or processor unit may be damaged. Contact your Sony dealer
or local authorized Sony service center.
p If the indicator flashes three times every 3 seconds, the processor
unit has overheated. Wait until the unit cools off and flashing
stops. Make sure not to cover or obstruct the ventilation openings
of the processor unit for proper ventilation.
p If the indicator flashes four times every 3 seconds for a minute,
the head mounted unit has overheated. Wait until the unit cools
off and flashing stops.
p If the indicator flashes five times every 3 seconds for a minute,
both the head mounted unit and processor unit have overheated.
Wait until the units cool off and flashing stops.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause/Action
When the system is off,
video and audio from the
playback equipment is not
played on a TV connected
to the HDMI OUT jack
p Confirm that the HDMI cables are fully connected.
p Switch the input source on the TV to this system.
p Check the HDMI output settings on the playback equipment.
“Control for HDMI” on a TV
cannot be used to control
the playback equipment
even when the system’s
HDMI pass-through is used
p Refer to the instruction manual supplied with your TV, and in the
TV’s “Control for HDMI” setting, specify playback equipment
connected to the processor unit as the controlling device.
Head mounted unit buttons p Buttons on the head mounted unit do not function unless you are
are unresponsive
wearing it.
“DEMO” appears in the
upper-right corner of the
setting menu screen
p Contact your Sony dealer or local authorized Sony service center.
Cannot adjust “Language
setting” because the
setting menu is in an
unfamiliar language
p If initial setup is not finished, press the b button repeatedly to
return to the language selection screen, and then select your
preferred language again.
p If you have finished initial setup, follow these steps to restore the
system to the original, factory settings and specify the correct
language.
1 Press the MENU button to display the setting menus.
2 Press the V button and select
(the “General Setup” icon).
3 Press the B button and move the cursor to the right.
4 Press the V button and move the cursor to the bottom setting.
5 Press the MENU button. (A “Reset to factory settings”
confirmation message is displayed.)
6 Press the b button, and then press the MENU button. (The
system will restart.)
7 After the initial setting screen is displayed, press the v/V
buttons to select your preferred language, and then press the B
button.
8 Follow the instructions displayed to finish initial setup.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions (W×H×D, including largest
protrusions)
Head mounted unit:
Approx. 187 mm × 104 mm ×
254 mm
Specifications
Power requirement
North American model:
120 V AC, 60 Hz
UK, Hong Kong, European, Middle
Eastern, South African, and Oceania
models:
3
1
8
8
(7 / in. × 4 / in. × 10 in.)
Processor unit:
Approx. 180 mm × 36 mm ×
168 mm
1
7
5
8
16
8
(7 / in. × 1 / in. × 6 / in.)
220 V – 240 V AC, 50/60 Hz
Russian and Ukrainian models:
220 V – 240 V AC, 50/60 Hz
Taiwan model:
110 V AC, 60 Hz
Chinese model:
220 V – 240 V AC, 50/60 Hz
South Korean model:
220 V AC, 60 Hz
Mass
Head mounted unit:
Approx. 330 g (12 oz) (excluding
connecting cord)
Processor unit:
Approx. 600 g (22 oz) (excluding
AC power cord (mains lead))
Display resolution
Indian model:
220 V – 240 V AC, 50/60 Hz
Mexican model:
1,280 dots (horizontal) × 720 dots
(vertical)
120 V AC, 50/60 Hz
Other models:
Interpupillary distance
1
7
4
8
55 mm – 72 mm (2 / in. – 2 / in.)
110 V – 240 V AC, 50/60 Hz
Inputs and outputs
Power consumption
HMD OUT:
15 W (in operation)
Dedicated 15-pin connector
HDMI IN and HDMI OUT :
HDMI 19-pin standard connector
Supported HDMI input and output signals:
Video input (2D formats):
0.25 W (in standby mode)
1.6 W (in standby mode using HDMI pass-
through)
*
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
480/60p, 576/50p, 720/24p, 720/
50p, 720/60p, 1080/50i, 1080/60i,
1080/24p, 1080/50p, 1080/60p
Video input (3D: Frame Packing, Side-
by-Side and Top-and-Bottom formats):
720/50p, 720/60p, 1080/50i, 1080/
60i, 1080/24p
Operating humidity
25 % to 80 %
Audio input:
Linear PCM (2/multi-channel, 32/
44.1/48 kHz), Dolby Digital (2/
multi-channel, 32/44.1/48 kHz),
AAC (2/multi-channel, 32/48 kHz)
Headphone jack:
Stereo minijack
36
Download from Www.Somanuals.com. All Manuals Search And Download.
* When HDMI pass-through is activated, signals
supplied to the processor unit are passed
through the processor unit to the HDMI output.
However, the following signals are not
compatible with pass-through.
License and Trademark
Notice
– Deep Color signals
– Video signals at 4k resolution (at a high
resolution exceeding 3,840 (horizontal) ×
2,160 (vertical) pixels)
Trademarks
• The terms HDMI™ and HDMI High-
Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in
the United States and other countries.
Headphones (supplied)
Frequency response:
5 Hz - 24,000 Hz
Impedance:
16 Ω (1 kHz)
Supplied accessories
• Manufactured under license from Dolby
Laboratories.
System specifications and appearance are
subject to change for improvement without
notice.
Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
• “PlayStation” is a registered trademark of
Sony Computer Entertainment Inc. Also,
“PS3” is a trademark of the same
company.
• VPT, Virtualphones Technology is a
registered trademark of Sony Corporation.
• Other system and product names are
generally trademarks or registered
trademarks of the manufacturers. ™ and ®
marks are not indicated in this document.
Notices and Licenses for
Software Used in this Product
Portions of the software in this product are
licensed under the FreeType Project
License.
Portions of this software are copyright
© 2006 The FreeType Project
37
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2012 Sony Corporation Printed in Japan
4-439-019-12(1)
Download from Www.Somanuals.com. All Manuals Search And Download.
|