3-244-192-12 (1)
In t e g ra t e d Re m o t e
Co m m a n d e r
Operating Instructions
RM-VL1000
© 2002 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Clo ck d isp la y a n d t im e r
fu n ct io n
A maximum of 12 timer macros,
timer control of automatic on/ off
and other controls (such as
recording, stopping, etc.) of each
component is possible.
Features
The RM-VL1000 Remote
Commander provides centralized
control of all your AV components
from a single remote commander
and saves the trouble of operating
different AV components with
different remote control devices.
The following are its main
features.
Ce n t ra lize d co n t ro l o f So n y AV
co m p o n e n t s w it h t h is o n e
re m o t e co m m a n d e r
This Commander is preset at the
factory to operate Sony brand
components, so you can use it out
of the box as a control center for
your Sony AV components.
Cu st o m izin g 180 la b e ls o f
co n t ro l ke ys in t h e d o t m a t rix
LCD with dot matrix makes label
customizing possible. A total of
180 labels on the LCD, such as
component labels, macro labels,
etc., can be customized. A label of
up to 8 letters with digits,
Re m o t e co n t ro l sig n a ls fo r n o n -
So n y co m p o n e n t s a re a lso
p re se t
This Commander is preset for
most major brands components
other than Sony. You can control
your components remotely by
setting their code numbers (page
13).
characters or symbols can be
selected and displayed.
Co n t ro l o f 12 co m p o n e n t s
Control of a maximum of 12
components (TV, SAT, VCR, DVD,
CD, AMP, etc.) is possible.
Components are selectable with 12
keys on the LCD display by
pressing the Label Select buttons.
This Commander has an LCD
display that changes the label
display according to the selected
component.
Le a rn in g fu n ct io n fo r
p ro g ra m m in g o t h e r re m o t e
co n t ro l sig n a ls yo u n e e d
This Commander has a learning
function to learn remote control
signals to operate non-preset
components or functions (page
23).
In addition, the Commander can
learn remote control signals
(infrared signals only) of non
Audio Visual components such as
air-conditioners, lights, etc.
(Certain appliances or functions
may not be available) (page 28).
Se t t in g a m a xim u m o f 36
m a cro co m m a n d s o f a
m a xim u m o f 32 su cce ssive
st e p s
A maximum of 36 macro
commands which provide a
maximum of 32 successive steps
by pressing a single button can be
set (12 system control macros, 12
component macros and 12 timer
macros). Macro execution speed is
changeable.
All power off macro commands
for Sony components are preset at
the factory to the SONY OFF label.
Ch a n n e l m a cro fu n ct io n a llo w s
yo u t o se le ct a ch a n n e l w it h a
sin g le b u t t o n
Up to 4 key steps can be
programmed on macro labels. If
you set the key operations for
entering a channel number on a
macro label, you can select the
channel by selecting that macro
label (page 48).
LCD d isp la y w it h b a cklig h t
The display backlight allows
operation even in the dark.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Getting Started
Location and Function of Controls .............................................................. 6
Installing the Batteries ................................................................................ 7
When to replace the batteries ........................................................................... 7
Setting the Clock ......................................................................................... 8
Setting the clock for the first time after installing batteries ......................... 8
Adjusting the clock after setting the clock ....................................................11
Basic Operations
Setting the Code for Preset Audio and Visual Components ...................... 13
Setting a component code ............................................................................... 13
Checking if the code number works ............................................................. 16
Finding a component code with the Search function ................................. 17
To clear the contents programmed for a specific component label .......... 19
Operating Your Components with the Remote Commander ..................... 21
To control the volume ...................................................................................... 23
Using Non-Preset Remote Control Operations — Learning Function ....... 23
Notes on learning the signals of an air-conditioner .................................... 28
For accurate learning ....................................................................................... 29
Changing or erasing the function of a taught label or button ................... 29
Advanced Features
Controlling the Volume of Visual Components Connected to an Audio
System ..................................................................................................... 30
Executing a Series of Commands — System Control Functions ................ 34
Programming a series of commands for the System Macro labels ........... 34
Notes on System Control Operations ........................................................... 38
To clear programmed commands for a specific System Macro number
label ................................................................................................................. 39
Programming a series of commands for the component labels ................ 40
Changing the interval between operation steps .......................................... 42
Changing the component macro executing time ........................................ 43
Adding an Extra Function to the Component Labels ................................. 44
Programming the Power-On command of a selected component
(for Sony components only) ........................................................................ 44
Assigning Other Components to the Component Labels........................... 46
Copying the settings of a component label to another label ..................... 46
Selecting a Channel with a Single Label — Channel Macro Function ....... 48
Setting the Timer ....................................................................................... 51
Setting the new timer program ...................................................................... 51
Changing the program already set or changing another program
that you select ................................................................................................ 56
To clear timer settings programmed for a specific program number
label ................................................................................................................. 60
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Other Functions
Locking the Controls — Hold Function ...................................................... 62
Adjusting the Automatic-Off Time of the Backlight of the
Display Window ....................................................................................... 63
Setting the Key-Touch Beep ....................................................................... 64
Adjusting the Contrast of the Display Window ......................................... 65
Changing the Names of the Labels on the Display .................................... 65
Erasing All the Settings .............................................................................. 68
Additional Information
Precautions ................................................................................................ 70
Maintenance .............................................................................................. 70
Specifications ............................................................................................. 70
Troubleshooting ......................................................................................... 71
Appendix
Table of Preset Functions ........................................................................... 74
TV ....................................................................................................................... 74
SAT (Digital satellite) ....................................................................................... 75
Digital cable box ............................................................................................... 76
DVD ................................................................................................................... 77
VCR1, VCR2 ...................................................................................................... 78
DVR (Digital video recorder) ......................................................................... 79
CD ...................................................................................................................... 80
CABLE (Cable box) .......................................................................................... 80
AMP ................................................................................................................... 81
MD ...................................................................................................................... 82
DAT .................................................................................................................... 82
TAPE A, TAPE B ............................................................................................... 83
Index ............................................................................................ Back cover
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
1 LCD display w indow
2 COMPO (component) button
3 SYSTEM button
4 TIMER button
Location and
Function of Controls
5 SCROLL button
6 SET button
7 Player Control buttons
8 PIP button
COMPO
SYSTEM
TIMER
9 TV/VIDEO button
0 DISPLAY button
qa MENU button
SCROLL
POWER
SET
qs VOL (volume) +/– buttons
qd MUTING button
qf Label Select button
qg POWER button
REC
VIDEO1
TUNER
MD
VIDEO2
AUX
TAPE
CD
TV
qh Number buttons
qj ENT (enter) button
qk SLEEP button
PHONO
DVD
ql GUIDE button
w; Joystick and Cursors
wa CH (channel) +/– buttons
ws RECALL button
MENU
GUIDE
* No t e o n t h e VOL a n d MUTING
b u t t o n s
VOL
CH
The Commander controls or mutes the
TV’s volume when you select a visual
component. The Commander controls
or mutes the amplifier’s volume when
you select an audio component.
You can also change this setting (page
30).
MUTING
RECALL
6
Download from Www.Somanuals.com. All Manuals Search And Download.
When to replace the
batteries
Installing the
Batteries
Batteries for remote control
operation and backlight (two
size AA (R6) batteries)
Under normal conditions, alkaline
batteries will last up to 5 months.
The battery life varies depending
on frequency of use.
Slide open the battery
compartment lid and insert two
size AA (R6) alkaline batteries (not
supplied). Be sure to line up the +
and – on the batteries with the +
and – on the battery compartment.
If the Commander does not
operate properly, the alkaline
batteries might be worn out and
“BATT” appears on the LCD
display when you try to operate
the Commander.
When the display dims, replace
the alkaline batteries with new
ones.
No t e s o n b a t t e rie s
• Do not mix old battery with new one
or mix different types of batteries
together.
• If the electrolyte inside the battery
leaks, wipe the contaminated area of
the battery compartment with a cloth
and replace the old batteries with
new ones. To prevent electrolyte from
leaking, remove the batteries when
you plan not to use the Commander
for a long period of time.
• After replacing batteries, set the clock
(page 8).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Keep the SET button
pressed for more than a
second.
Setting the Clock
Setting the clock for the
first time after installing
batteries
“SET” appears on the LCD
display.
COMPO
SYSTEM
TIMER
2 Select “CLOCK” by
pressing the Label Select
button.
SCROLL
3
POWER
SET
2
1,7
SET
REC
VIDEO1
VIDEO2
CD
AUX
TAPE
PRESET
LEARN
LABEL
CLOCK
TUNER
MD
TV
PHONO
DVD
MENU
GUIDE
4-6
The Commander enters clock
setting mode.
VOL
CH
MUTING
RECALL
SET
CLOCK
SUN
12:00 AM
STD TIME
DS TIME
--:--
For the first time after installing
batteries, the display for
component operation appears.
TV
PIP SWAP
PIP MOVE
PIP CH+
PIP CH-
--:--
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select “STD TIME”
(standard time) or “DS
TIME” (daylight saving
time) by pressing the Label
Select button.
4 Select the day of the week
by pressing the Joystick
toward
or
.
The selected day of the week
flashes.
SUN
If the summer time (daylight
saving time) is used in your
area, select “DS TIME” when it
is in the summer time.
MON
TUE
WED
THU
FRI
SET
CLOCK
SUN
12:00 AM
STD TIME
DS TIME
--:--
SAT
SUN : Sunday
MON : Monday
TUE : Tuesday
WED : Wednesday
THU : Thursday
If the summer time is not used
in your area, select “STD
TIME.”
FRI
: Friday
SET
SAT : Saturday
CLOCK
SUN
Then press the Joystick toward
. The day of the week is set.
“12” and “AM” flash.
12:00 AM
STD TIME
DS TIME
--:--
SET
CLOCK
MON
The selected “STD TIME” or
“DS TIME” stays lit.
12:00 AM
STD TIME
Fo r e xa m p le , w h e n “ STD
TIME” is se le ct e d
--:--
SET
CLOCK
No t e
If you press the Joystick toward , the
day of the week is set and setting
mode skips to Step 6.
SUN
12:00 AM
STD TIME
--:--
Continued
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g t h e Clo ck (co n t in u e d )
6 Set the minute by pressing
the Joystick toward
or
.
5 Set the hour (AM or PM) by
Each time the Joystick is
pressing the Joystick
pressed toward
or , the
minute changes by one.
toward
or
.
The selected minute flashes.
Each time the Joystick is
pressed toward
or , the
hour changes by one.
The selected hour (AM or PM)
flash.
PM
PM
AM
AM
AM
PM
No t e s
• If you press the Joystick toward
, the minute is set and the
setting mode returns to Step 4.
• If you press the Joystick toward
, the minute is set and the
setting mode returns to Step 5.
• If you want to finish the clock
setting, go to Step 7.
Then press the Joystick toward
. The hour is set. “00”
(minute) flashes.
SET
CLOCK
MON
9:00 PM
STD TIME
--:--
No t e
If you press the Joystick toward , the
hour and AM (or PM) are set and the
setting mode returns to Step 4.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Press the SET button.
Adjusting the clock after
setting the clock
COMPO
SYSTEM
With a beep sound, the day of
the week, the hour, and the
minute are set, and the clock
starts from 0 seconds.
TIMER
3
SCROLL
2
POWER
SET
1,5
REC
SET
VIDEO1
VIDEO2
AUX
TAPE
CLOCK
TUNER
MD
CD
TV
MON
PHONO
DVD
STD TIME
9:30 PM
MENU
GUIDE
4
The Commander enters the
setting mode.
VOL
CH
MUTING
RECALL
SET
PRESET
LEARN
LABEL
CLOCK
1 Keep the SET button
pressed for more than a
second.
If yo u p re ss t h e SET b u t t o n
a g a in
The display for component operation
appears.
“SET” appears on the LCD
display.
No t e
If you press the SET button in steps 4-6,
the clock setting is confirmed and starts
form 0 seconds.
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo1ad1.
Se t t in g t h e Clo ck (co n t in u e d )
4 Set the clock by pressing
the Joystick toward
,
,
or . Follow Steps 4 - 6 on
pages 9-10.
2 Select “CLOCK” by
pressing the Label Select
button.
5 Press the SET button.
SET
PRESET
LEARN
LABEL
CLOCK
The Commander enters clock
setting mode.
“CLOCK” and the current time
setting is displayed on the LCD
display.
The time mode (STD TIME or
DS TIME) currently set stays
lit, and the other flashes.
3 To change the time mode,
select the time mode which
flashes (STD TIME or DS
TIME) by pressing the
Label Select button.
SET
CLOCK
WED
10:00 AM
STD TIME
DS TIME
10:00 AM
If it is not necessary to change
the time mode, press the
Joystick toward or , and go
to Step 4.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra t io n s
Setting a component code
Setting the Code for
Preset Audio and
Visual Components
The Commander is preset at the
factory to operate Sony brand AV
components (see the table below).
If you are using the Commander
with a factory-set Sony
COMPO
3
4
SYSTEM
TIMER
SCROLL
POWER
SET
2
REC
components, skip the following
procedures.
VIDEO1
TUNER
MD
VIDEO2
CD
AUX
TAPE
You can use the Commander with
other preset AV components also.
To use with other AV components,
you need to follow the following
procedures to set the correct codes
for each component.
TV
PHONO
5
DVD
MENU
GUIDE
Component
Preset
Factory setting
name on the component
display
VOL
CH
TV
TV
Sony TV
MUTING
RECALL
SAT
Digital
satellite
Sony digital
cable box
CABLE
DVD
Cable box
Cable box
DVD player Sony DVD
player
VCR1
VCR2
DVR
VCR
Sony VHS VCR
(VTR3)
Example: To set up a Philips’ TV
VCR
Sony 8mm VCR
(VTR2)
1 See the tables in the
supplied “Component
Digital video Sony digital
recorder
video recorder
Sony CD player
Sony amplifier
Sony MD deck
Code Numbers,” and find
the four-digit code number
for the desired component.
If more than one code number
is listed, use the number that is
listed first.
CD
CD player
Amplifier
AMP
MD/ DAT MD deck/
DAT deck
TAPE A
Cassette
deck*
Sony cassette
deck
TAPE B
Cassette
deck*
Sony cassette
deck
For example, to set up a Philips
TV, you would use the code
number 8056.
* Analog audio compact cassette deck
The first digit of the
component code number
means the component category
(TV, VCR, etc.). For further
details, see the tables in the
supplied “Component Code
Numbers.”
See “Table of Preset Functions”
(page 74) for the functions of keys
and buttons as for each
component.
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo1ad3.
Se t t in g t h e Co d e fo r Pre se t
Au d io a n d Visu a l Co m p o n e n t s
(co n t in u e d )
4 Select the desired
component by pressing the
Label Select button.
2 Keep the SET button
pressed for more than a
second.
SET
PRESET
TV
SAT
CABLE
DVD
“SET” appears on the LCD
display.
3 Select “PRESET” by
pressing the Label Select
button.
To change the labels, press the
SCROLL button repeatedly.
SET
PRESET
LEARN
LABEL
CLOCK
Each time the SCROLL button
is pressed, the labels change as
follows.
TV
SAT
CABLE
DVD
“PRESET” appears on the LCD
display, and component names
are displayed on the labels.
VCR1
DVR
CD
SET
PRESET
AMP
TV
SAT
CABLE
DVD
MD/DAT
VCR2
TAPE A
TAPE B
14
Download from Www.Somanuals.com. All Manuals Search And Download.
When the desired component
is selected, the component
name (in this case, TV), and the
four-digit component code
number previously set for the
component are displayed.
6 If you want to set a code for
another component, repeat
Steps 4 and 5.
If yo u p re ss t h e SET b u t t o n
The display returns to the previous
one.
COMPO
SET
No t e s
PRESET
• If you press a component code
number that is not on the table in the
supplied “Component Code
Numbers,” the Commander beeps
five times and “NG” flashes after you
press the ENT button. The setting
returns to the previous one. If this
happens, check the component code
number, and try setting again.
• If you don't input anything into the
Commander for over two minutes
between each step, the setup
8001
TV
procedure will be canceled. In this
case, preset again.
• The first digit of the component code
number means the component
category (TV, VCR, etc.). The
5 Press the four-digit
component code number by
pressing the number
buttons followed by the
ENT button.
component corresponding to the
four-digit component code number is
preset in Step 5. If you preset the
component of which the category is
different from that preset previously,
you can, if necessary, change the
component names (see page 65).
• If you preset a component code after
you input character contents to the
labels on the LCD display (page 65),
they are cleared and the original
display is shown. Edit the characters
after you decide the component to be
used by presetting a code.
Exa m p le : To e n t e r “ 8056”
Input “8,” “0,” “5,” “6,” and
press the ENT button.
If t h e se t t in g o f t h e co d e is
su cce ssfu l
With a beep sound, “OK” and
input digits are displayed.
The digits are decided and the
display returns to the
presetting mode.
If yo u p re ss t h e SET b u t t o n
The display returns to the setting
mode.
If yo u p re ss t h e SET b u t t o n
a g a in
The display for component
operation appears.
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo1ad5.
Se t t in g t h e Co d e fo r Pre se t
Au d io a n d Visu a l Co m p o n e n t s
(co n t in u e d )
TV
SAT
CABLE
DVD
Checking if the code
number works
VCR1
DVR
CD
1 When the display for
component operation
appears (if not, press the
SET button repeatedly),
press the COMPO button.
AMP
MD/DAT
VCR2
TAPE A
TAPE B
“COMPO” appears on the LCD
display, and component names
are displayed on the labels.
2 Select the component you
have set up by pressing the
Label Select button.
COMPO
TV
SAT
COMPO
CABLE
DVD
TV
10:00 AM
SAT
CABLE
DVD
To change the labels, press the
SCROLL button repeatedly.
10:00 AM
3 Turn on the component by
Each time the SCROLL button
is pressed, the labels change as
follows.
its power switch.
4 Aim the Commander at the
component and press the
POWER button.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
When the remote control signal
Finding a component code
is sent,
is shown on the
display.
with the Search function
You can find a code number
available for a component that
doesn’t have one in the supplied
“Component Code Numbers.”
TV
The component should turn
off.
Before starting the Search
function
5 If you have succeeded,
check that the Commander
is operating the other
functions of your
Set each component to the
following status to enable the
Search function.
TV, AMP: Power-on
CD, MD, TAPE, DAT: Power-on
with a playback source (disc,
cassette tape, etc.)
component, such as channel
and volume control.
See page 23 for details.
Other components: Power-off
If t h e Co m m a n d e r d o e s n o t
se e m t o b e w o rkin g
COMPO
Try repeating these setup procedures
using the other codes listed for your
components (see page 13).
2
3
SYSTEM
TIMER
SCROLL
POWER
SET
Notes on labels on the LCD
display which have “learned” a
remote control signal already
If another signal has already been
programmed on that label by the
learning function (page 23), you
cannot preset the component code
number. To use it as a preset
component label, first erase its
learned signal (page 29).
5
1
REC
VIDEO1
TUNER
MD
VIDEO2
CD
AUX
TAPE
TV
PHONO
DVD
6
4
MENU
GUIDE
VOL
CH
MUTING
RECALL
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo1ad7.
Se t t in g t h e Co d e fo r Pre se t
Au d io a n d Visu a l Co m p o n e n t s
(co n t in u e d )
3 Select the desired
component by pressing the
Label Select button.
1 Keep the SET button
pressed for more than a
second.
SET
PRESET
TV
SAT
CABLE
DVD
“SET” appears on the LCD
display.
2 Select “PRESET” by
pressing the Label Select
button.
To change the labels, press the
SCROLL button repeatedly.
Each time the SCROLL button
is pressed, the labels change as
in Step 4 on page 14.
SET
When the desired component
is selected, the component
name (in this case, TV) and the
four-digit component code
number previously set to the
component is displayed.
PRESET
LEARN
LABEL
CLOCK
COMPO
SET
“PRESET” appears on the LCD
display, and component names
are displayed on the labels.
PRESET
SET
8001
TV
PRESET
TV
SAT
CABLE
DVD
4 Press the CH + or CH –
button to search for
component code numbers
in the same category (in this
case, code numbers which
begin with “8”).
Press CH + to go to the next
code number.
Press CH – to go back to the
previous code number.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
No t e
To search for component code
numbers in another category, return
to Step 3, or input a four-digit
component code number of another
category (for example, a code
number which begins with “3”, “4”,
etc.) before Step 4.
To clear the contents
programmed for a specific
component label
You can clear all data you have set
(preset data, learned contents,
channel macro, character contents
of the labels, programmed data of
system macro for the component
label).
5 Aim the Commander at the
component and press the
POWER button.
1 Keep the SET button
pressed for more than a
second.
When the remote control signal
is sent,
is shown on the
display.
COMPO
SET
“SET” appears on the LCD
display.
PRESET
If it works (power-off for TV,
AMP, playback for CD, MD,
DAT, TAPE, and power-on for
other components), go to Step
6.
2 Press the SCROLL button
twice to display “CLEAR”
on one of the labels.
If it does not, repeat Steps 4 to
5.
6 Press the ENT button.
Each time the SCROLL button
is pressed, the label changes as
follows.
PRESET
LEARN
LABEL
CLOCK
With a beep sound, “OK” and
input digits are displayed.
The component code number is
decided and the display returns
to the presetting mode.
If yo u p re ss t h e SET b u t t o n
The display returns to the setting
mode.
SYSTEM
TIMER
If yo u p re ss t h e SET b u t t o n
a g a in
The display for component
operation appears.
CH MACRO
VOLUME
No t e
It is recommended to write down
the code number.
POWER ON
COPY
CLEAR
SYSDELAY
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo1ad9.
Se t t in g t h e Co d e fo r Pre se t
Au d io a n d Visu a l Co m p o n e n t s
(co n t in u e d )
5 Select the component of
which the settings you
want to erase by pressing
the Label Select button.
3 Select “CLEAR” by
pressing the Label Select
button.
COMPO
SET
CLEAR
TV
SET
SAT
CABLE
DVD
POWER ON
COPY
CLEAR
SYSDELAY
Wh ile e ra sin g
COMPO
SET
4 Select “COMPO” by
pressing the Label Select
button.
CLEAR
COMPLETE
R
R
R
R
R
R
R
R
R
SET
CLEAR
TV
COMPO
SYSTEM
TIMER
ALL
When erasing finishes,
“COMPLETE” is displayed with a
beep sound.
If yo u w a n t t o e ra se t h e
se t t in g s o f o t h e r
Co m p o n e n t s
Component names are
Repeat Step 5.
displayed on the labels.
If yo u p re ss t h e SET b u t t o n
The display returns to the previous
one.
To change the labels, press the
SCROLL button repeatedly.
Each time the SCROLL button
is pressed, the labels change as
in Step 4 on page 14.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPO
Operating Your
Components with the
Remote Commander
If you operate a non-Sony
component, make sure you set the
component code first (page 13).
TV
SAT
CABLE
DVD
10:00 AM
1
COMPO
To change the labels, press the
SCROLL button repeatedly.
SYSTEM
TIMER
2
SCROLL
POWER
SET
REC
Each time the SCROLL button
is pressed, the labels change as
follows.
VIDEO1
TUNER
MD
VIDEO2
AUX
TAPE
CD
TV
PHONO
DVD
TV
SAT
CABLE
DVD
MENU
GUIDE
VOL
CH
VCR1
DVR
CD
MUTING
RECALL
AMP
MD/DAT
VCR2
Example: To play VCR1
TAPE A
TAPE B
1 When the display for
component operation
appears (if not, press the
SET button repeatedly),
press the COMPO button.
“COMPO” appears on the LCD
display, and component names
are displayed on the labels.
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo2ad1.
Op e ra t in g Yo u r Co m p o n e n t s
w it h t h e Re m o t e Co m m a n d e r
(co n t in u e d )
To change the labels, press the
SCROLL button repeatedly.
Each time the SCROLL button
is pressed, the labels change as
follows.
2 Select the component (in
this case, VCR1) to be
operated by pressing the
Label Select button.
ANT SW
SEARCH
SEARCH
PLAYx2
t
T
COMPO
VCR1
DVR
C.RESET
COUNTER
CD
COMMERCL
SP/LP
AMP
10:00 AM
EJECT
The labels for operating the
selected component are
displayed.
********
********
********
3 Press the desired button on
the Commander or select
the label on the LCD
VCR1
ANT SW
SEARCH
SEARCH
PLAYx2
t
T
display by pressing the
Label Select button.
10:00 AM
When the remote control signal
is sent,
is shown in the
display.
See “Table of Preset Functions”
(page 74) for the functions of
keys and buttons for each
component.
No t e
The remote control signals may be
different for some components or
functions. In this case, program the
remote control signals with the learning
function (see page 23). Note, however,
that components and functions that do
not support the remote control of
infrared signals will not work with this
Commander.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
To control the volume
Using Non-Preset
Remote Control
Operations
Press the VOL +/ – buttons to
control the volume, and the
MUTING button to mute. When
you select a visual component, the
TV’s volume will be controlled,
and when you select an audio
component, the amplifier’s
— Le a rn in g Fu n ct io n
To operate non-preset components
or functions, use the following
“learning” procedure to “teach”
any of the programmable buttons
on the Commander and labels on
the display to operate the
functions of another remote
control. You can also use the
learning function to change the
signal of individual labels and
buttons after setting the
volume will be controlled. You can
change this setting also (page 30).
No t e s
• If you have programmed any signal
for the VOL or MUTING button for
any component using the learning
function, that signal will be
transmitted instead of controlling the
volume of the TV or amplifier.
• If you have programmed any signal
for the VOL or MUTING button of
TV or AMP using the learning
function, that signal will be also
transmitted when you select another
component. However, if you have
programmed any signal for the VOL
or MUTING button of another
component, that signal will be
transmitted only after you select that
component.
component code number (page
13).
No t e
Some specific remote control signals
may not be learned.
• If you have assigned another
component to the TV or AMP button,
the volume of the TV or amplifier
cannot be controlled even when you
select other components.
COMPO
SYSTEM
3
4
TIMER
SCROLL
POWER
SET
2,8
REC
VIDEO1
TUNER
MD
VIDEO2
CD
AUX
TAPE
TV
PHONO
DVD
MENU
GUIDE
VOL
CH
MUTING
RECALL
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo2ad3.
Usin g No n -Pre se t Re m o t e
Co n t ro l Op e ra t io n s
— Le a rn in g Fu n ct io n (co n t in u e d )
“LEARN” appears on the LCD
display, and component names
are displayed on the labels.
Example: To program the N
(Play) signal of your component
to the VCR1 N (Play) button of
the Commander
COMPO
SET
LEARN
TV
SAT
1 Place the RM-VL1000 head
to head with your
component’s remote
control.
CABLE
DVD
4 Select the desired
component of which signals
are to be learned by
pressing the Label Select
button.
about 2 – 4 inches
(5 – 10 cm) away
RM-VL1000
2 Keep the SET button
pressed for more than a
second.
(To change the labels, press the
SCROLL button repeatedly.)
COMPO
SET
LEARN
VCR1
DVR
“SET” appears on the LCD
display.
CD
3 Select “LEARN” by
pressing the Label Select
button.
AMP
All the learnable labels flash.
SET
PRESET
LEARN
LABEL
CLOCK
SET
LEARN
ANT SW
SEARCH
SEARCH
PLAYx2
VCR1
t
T
24
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the labels, press the
SCROLL button repeatedly.
5 Select the label on the LCD
display by pressing the
Label Select button or press
the button on the
Commander you want to
“teach.”
Each time the SCROLL button
is pressed, the labels change as
follows.
ANT SW
“LEARN” flashes for 10 seconds,
and the Commander enters
receiving mode.
SEARCH
SEARCH
PLAYx2
t
T
Wh e n t e a ch in g t o a la b e l o n
t h e LCD
The selected label stays lit. Other
labels disappear.
C.RESET
COUNTER
COMMERCL
SP/LP
SET LEARN
LEARN
EJECT
********
********
********
PLAYx2
VCR1
No t e o n t h e fla sh in g d isp la y
The labels that are already preset
for that component flash twice
while those that are not preset flash
once.
Wh e n t e a ch in g t o a b u t t o n
o n t h e Co m m a n d e r
The labels disappear.
To ch a n g e t h e n a m e o f t h e
La b e ls
Follow the procedure on page 27.
6 Press and hold down the
button on the other remote
control until you hear a
beep.
If yo u p re ss t h e SET b u t t o n
The display returns to the setting
learning mode.
(If you release the button
before you hear a beep, the
signal may not be learned
correctly.)
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo2ad5.
Usin g No n -Pre se t Re m o t e
Co n t ro l Op e ra t io n s
— Le a rn in g Fu n ct io n (co n t in u e d )
When you teach the REC
(record) signal
If you have to press two buttons at
the same time (for example, z and
N) to start recording on your
cassette deck or VCR, teach the
Wh e n t h e co m m a n d h a s
b e e n le a rn e d su cce ssfu lly
The learned labels stay lit and the
other learnable labels flash.
REC signal as below.
In Step 5 (page 25), press only the REC
button. Then press the two buttons on
your component’s remote control in
Step 6.
If “ NG” fla sh e s o n t h e
d isp la y
Learning did not succeed. Try Steps
5 and 6 again.
You cannot teach the REC signal
to the two buttons pressed at the
same time (for example, z and
N) on the Commander. Teach the
REC signal to a single button.
7 Repeat Steps 5 and 6 to
teach functions to other
labels or buttons.
To le a rn a n o t h e r
co m p o n e n t ’s re m o t e co n t ro l
sig n a l
Select the component in Step 4, and
then follow Steps 5 and 6 to
perform learning.
When you teach signals to the
VOL +/ – or MUTING buttons
• If you have programmed any
signal on the VOL +/ – or
MUTING button for components
other than TV and AMP using
the learning function, that signal
will be transmitted only when
you select that component.
• If you have programmed any
signal for the VOL or MUTING
button of TV or AMP using the
learning function, that signal
will be also transmitted when
you select another component.
However, if you have
programmed any signal for the
VOL +/ – or MUTING button of
another component, that signal
will be transmitted only after
you select that component.
8 Press the SET button.
The display returns to the
setting learning mode.
If yo u p re ss t h e SET b u t t o n
a g a in
The display returns to the setting
mode.
If yo u p re ss t h e SET b u t t o n
o n ce a g a in
The display for component
operation appears.
No t e s
• If you do not perform learning steps
within two minutes, learning mode
ends.
• If you do not perform Step 6 within
10 seconds after Step 5, the display
reverts to the display in Step 4. (All
the learnable labels flash.) In this
case, perform Step 5 again while the
display is flashing.
When you teach the signals of
an air-conditioner
See the “Notes on learning the
signals of an air-conditioner” on
page 28.
If t h e Co m m a n d e r d o e s n o t
se e m t o b e w o rkin g
If the learned label or button does not
operate properly, teach once again. (For
example, if the volume becomes very
loud after pressing the VOL+ button
only once, noise may have interfered
during the learning procedure.)
If yo u w a n t t o se t a co m p o n e n t
co d e t o a la b e l a ft e r le a rn in g a
sig n a l
You cannot preset the component code
number to a label which has “learned
signal”. To use it as a preset component
label, first erase its learned signal (page
29).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the function name of
the labels on the display
You can change the display of the
labels on the display to a suitable
name using up to 8 characters or
digits.
The Commander enters the
Label Input mode.
SET
LEARN
1 In Step 4 (page 24), select
the component label (for
example, VCR1) by
pressing the Label Select
button.
PLAYx2
VCR1
COMPO
SET
LEARN
VCR1
DVR
3 Input digits or characters
on the label by pressing the
Joystick toward
and
,
,
.
CD
The cursor flashes at the left
end of the label.
AMP
Begin inputting digits or
characters from the left. Press
the Joystick toward
or
repeatedly until you obtain the
desired digit or character.
Each time the Joystick is
pressed toward , the digit or
character changes in the order
as below.
Each time the Joystick is
pressed toward , the digit or
character changes conversely.
If you keep the Joystick pressed
2 Select the function name
you want to change by
keeping the Label Select
button pressed for more
than 2 seconds.
SET
LEARN
toward
or , the digit or
ANT SW
character changes
continuously.
SEARCH
SEARCH
PLAYx2
VCR1
t
T
A t B t C t D t E t F t
G t H t I t J t K t L t
M t N t O t P t Q t R
t S t T t U t V t W t
X t Y t Z t a t b t c t
d t e t f t g t h t i t j
t k t l t m t n t o t p
tq t r t s t t t u t v t
w t x t y t z t 0 t 1 t
2 t 3 t 4 t 5 t 6 t 7 t 8
t 9 t
space t ! t ” t # t $ t &
t ( t ) t ∗ t + t , t – t
. t / t : t ? t ~ t
t
t
t
t
t
t
t
t
t
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo2ad7.
Usin g No n -Pre se t Re m o t e
Co n t ro l Op e ra t io n s
— Le a rn in g Fu n ct io n (co n t in u e d )
Notes on learning the
signals of an air-
conditioner
If you make a mistake, move
the cursor to the digit or
character you want to correct
by pressing the or button,
and input again.
About seasonal adjustments
If you change the settings of the
air-conditioner for the season, you
have to program the remote
control signals of the new settings
on the Commander.
4 Decide the digit or the
character you input by
pressing the Joystick
If the power-on/off operation
does not work correctly
toward
.
The air-conditioner may not be
turned on or off properly with the
button or key of this Commander,
for which you have programmed
its power-on/ off signal.
If the Commander can operate
only “ON” with one button or
label and “OFF” with another,
while your air-conditioner’s
remote control can operate “ON/
OFF” with a single button or label,
program the signal on two buttons
or labels of the Commander as
follows.
The cursor moves to the right.
When the Joystick is pressed
toward , the cursor moves to
the left. You can input a digit or
character to the place where
the cursor flashes.
5 Repeat Steps 3 and 4 until
you input a suitable name
to the label.
When the cursor reaches to the
right end, if the Joystick is
pressed toward , the cursor
returns back to the left end.
1 Clear the learned power-on/ off
signal from the button or label
(page 29).
2 Program the signal (transmitted
from the power-on/ off button
of the air-conditioner’s remote
control) for the button or label
again.
6 Press the SET button.
The commander enters the
learning standby mode.
3 Program the signal from the
same button of the remote
control for another button or
label.
The two buttons or labels of the
Commander have been
programmed with the power-on
signal and the power-off signal of
the air-conditioner, respectively so
that you can operate the air-
conditioner with the Commander.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
For accurate learning
• Do not move the remote units
during the learning procedure.
• Be sure to keep holding down
the button of the other remote
control until you hear the
Changing or erasing the
function of a taught label
or button
To change the learned function,
clear it first and perform learning
again.
confirmation beep.
• Use fresh batteries in both
remote control units.
• Avoid learning in places under
direct sunlight or strong
To clear the learned function of
a label or button
After Step 4 (page 24), while
pressing the button or the Label
Select button corresponding to the
label that you want to erase, press
the SCROLL button.
fluorescent light.
• The remote control detector area
may differ depending on each
remote unit. If learning does not
work, try changing the positions
of the two remote control units.
• When you teach signals of an
interactive signal exchange
system remote control unit
(supplied with some of Sony’s
receivers and amplifiers) to the
Commander, the response signal
of the main unit may interfere
with the learning of the
“CLEAR OK” appears and the
learned function is cleared with a
beep sound.
The cleared label flashes together
with other learnable labels.
Commander. In such a case,
move to a place where the
signals will not reach the main
unit (e.g. other rooms, etc.).
If t h e ch a ra ct e r co n t e n t s o f t h e
la b e l h a ve b e e n ch a n g e d
To clear the character contents of that
label, perform the same procedure
above again. The input contents are
cleared and the label display returns to
the original setting.
IMPORTANT
Be sure to place the
Commander out of the reach of
small children or pets.
Also set the Hold function to
lock all the buttons on the
Commander (page 62) when it
is not used. Components such
as air conditioners, heaters,
electric appliances, and electric
shutters or curtains receiving an
infrared signal can be
dangerous if misused.
Download from Www.Somanuals.com. All Manuals Search And Downlo2ad9.
Ad va n ce d Fe a t u re s
However, if your visual
components are connected to an
audio system, you probably hear
TV or VCR sound from the
loudspeakers via your amplifier,
not from your TV speakers. In this
case, you need to change the
factory preset so that you can
control the volume of your visual
components without first having
to switch to the amplifier.
Controlling the
Volume of Visual
Components
Connected to an
Audio System
The Commander is factory preset
based on the assumption that you
hear the sound of your visual
components from your TV
speakers, and that you hear sound
of your audio components from
the loudspeakers connected to
your amplifier.
To change the Factory Preset of
the Volume Control
2
COMPO
5,7
SYSTEM
This feature enables you to control
the volume of your TV or
4
TIMER
SCROLL
amplifier without having to select
TV or AMP each time you want to
control the volume.
POWER
SET
3,6
For example, to control the
volume while using a VCR, you
don’t need to press the TV button
to control the TV volume.
REC
1,8
VIDEO1
TUNER
MD
VIDEO2
CD
AUX
TAPE
TV
PHONO
You can switch the volume of all
the visual components to the
amplifier at the same time.
DVD
MENU
GUIDE
The following table shows the
factory setting of which volume
would be controlled for each
component.
VOL
CH
Component Controls the volume
name on the of
MUTING
RECALL
display
TV
TV
VCR1
VCR2
CABLE
SAT
TV
TV
TV
TV
DVR
TV
DVD
TV
CD
amplifier
amplifier
amplifier
amplifier
amplifier
AMP
MD/ DAT
TAPE A
TAPE B
30
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Keep the SET button
pressed for more than a
second.
4 To change the volume
control setting of visual
components (TV, SAT,
CABLE, DVD, VCR1, VCR2
and DVR), select the
component set to visual (in
this case, TV) by pressing
the Label Select button.
“SET” appears on the LCD
display.
2 Press the SCROLL button
once to display “VOLUME”
on one of the labels.
SET
VOLUME
VISUAL
TV
AUDIO
AMP
3 Select “VOLUME” by
pressing the Label Select
button.
The component names are
displayed on the labels. To
change the labels, press the
SCROLL button. Each time the
SCROLL button is pressed, the
labels change as in Step 4 on
page 14.
SET
SYSTEM
TIMER
CH MACRO
VOLUME
The components with a preset
code number beginning with
“8” (TV) or “4” (amplifier)
flash.
COMPO
SET
VOLUME
TV
SAT
CABLE
DVD
VISUAL
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo3ad1.
Co n t ro llin g t h e Vo lu m e o f Visu a l
Co m p o n e n t s Co n n e ct e d t o a n
Au d io Syst e m (co n t in u e d )
The component names are
displayed on the labels. To
change the labels, press the
SCROLL button.
5 Select the component of
which the volume setting
you want to change ( in this
case, AMP) by pressing the
Label Select button. (To
change the labels, press the
SCROLL button.)
The components with a preset
code number beginning with
“4” (amplifier) flash.
COMPO
SET
VOLUME
VCR1
DVR
With a beep sound, the volume
control setting of visual
components is switched to the
amplifier.
CD
AMP
AUDIO
COMPO
SET
VOLUME
AMP
R
7 Select the component of
which volume setting you
want to change (in this case,
AMP) by pressing the Label
Select button. (To change
the labels, press the
R
R
VISUAL
SCROLL button.)
If you want to change the
volume setting of other
components, repeat Steps 4
and 5.
With a beep sound, the volume
control setting of audio
components is switched to the
amplifier.
6 To change the volume
control setting of audio
components (AMP, CD,
MD/ DAT, TAPE A and
TAPE B), select the
COMPO
SET
VOLUME
AMP
R
component set to audio (in
this case, AMP) by pressing
the Label Select button.
R
R
AUDIO
SET
VOLUME
If you want to change the
volume setting of other
components, repeat Steps 6 and
7.
VISUAL
AMP
AUDIO
AMP
32
Download from Www.Somanuals.com. All Manuals Search And Download.
• When controlling the volume of the
audio components, the signal of the
VOL or MUTING button or the
learned signal of the VOL or
MUTING button for the amplifier is
transmitted.
8 Press the SET button.
The display returns to the
previous one.
• When controlling the volume of the
visual components, if a TV is set for
volume control setting, the signal of
the VOL or MUTING button or the
learned signal of the VOL or
No t e s
• If you set a TV or an amplifier for
volume control setting to the TV or
AMP label displayed by default, the
signal of the preset component will
be transmitted. If you program any
signal for the VOL or MUTING
button of each component by
“learning”, the learned signal
programmed for each component will
be transmitted.
• Even if you preset another TV or
amplifier to a component label, when
the preset data of the TV or amplifier
for volume control setting to the TV
or AMP label displayed by default
will be not cleared, the signal of the
component preset by default will be
transmitted.
MUTING button for the TV is
transmitted.
• When controlling the volume of the
visual components, if an amplifier is
set for volume control setting, the
signal of the VOL or MUTING button
for the amplifier is transmitted for the
TV. But if you program any signal for
the VOL or MUTING button of the
TV, its learned signal is transmitted
for the TV.
But if you set another TV or amplifier
for volume control setting, its signal
will be transmitted. In this case, its
learned signal will be transmitted if
you program any signal for the VOL
or MUTING button.
• If a TV or an amplifier set for volume
control setting has no preset data for
the VOL or MUTING button, the
signal cannot be transmitted.
• If you preset another category of
component than a TV or an amplifier
to the component label for which the
volume control setting has been
programmed, the signal of the VOL
or MUTING button cannot be
transmitted.
• When operating a component which
has no volume data, if you have
programmed any signal for its VOL
or MUTING button of each
component by “learning”, the learned
signal programmed for the
component is transmitted even if you
try to control the volume using the
volume control function.
Download from Www.Somanuals.com. All Manuals Search And Downlo3ad3.
While executing the programmed
commands, at the same time that
each remote control signal is
transmitted, the corresponding
label is displayed.
Executing a Series of
Commands
— Syst e m Co n t ro l Fu n ct io n s
With the System Control function,
you can program a series of
operating commands, and execute
them simply as follows.
Programming a series of
commands for the System
Macro labels
1 When the display for
component operation appears
(if not, press the SET button
repeatedly), press the SYSTEM
button.
Example: To program the
procedure above for the
SYSTEM2 label
2 Select the System Macro
number label by pressing the
Label Select button.
2
COMPO
For example, when you watch a
video, a series of operations like
the ones below are necessary.
3,4
SYSTEM
TIMER
SCROLL
5,6
Example:
1 Turn on the TV.
POWER
SET
2 Turn on the video (VCR1).
3 Turn on the amplifier.
4 Set the input selector of the
amplifier to VIDEO 1.
5 Set the input mode of the TV to
VIDEO.
REC
1,9
VIDEO1
TUNER
MD
VIDEO2
AUX
TAPE
CD
TV
PHONO
DVD
6 Start video playback.
MENU
GUIDE
You can program up to 32
consecutive operation steps to
each of the System Macro labels
(SONY OFF, SYSTEM 2-12).
VOL
CH
At the factory, the SONY OFF
label is preset with a series of the
system power-off commands for
Sony components. You can
overwrite a system macro over
this label.
MUTING
RECALL
If you have set the System Control
function for a component label
(page 40), the execution of the
programmed commands begins
when you press the Label Select
button corresponding to the label
for more than 2 seconds.
The component macro executing
time is variable by changing the
setting (page 43).
34
Download from Www.Somanuals.com. All Manuals Search And Download.
The macro numbers are
displayed on the labels. To
change the labels (SONY OFF,
SYSTEM2-12), press the
SCROLL button repeatedly.
The macro numbers for which
the system macro is
1 Keep the SET button
pressed for more than a
second.
programmed stay lit, and
others flash.
“SET” appears on the LCD
display.
5 Select the macro number by
pressing the Label Select
button.
2 Press the SCROLL button
once to display “SYSTEM”
on one of the labels.
SYSTEM
SET
3 Select “SYSTEM” by
pressing the Label Select
button.
SYSTEM
SONY OFF
SYSTEM2
SYSTEM3
SYSTEM4
SET
SYSTEM
TIMER
CH MACRO
VOLUME
The selected macro number is
displayed, and component
names are displayed on the
labels.
If a se rie s o f co m m a n d s is
a lre a d y p ro g ra m m e d fo r
t h a t la b e l
To program a new series of
operations, clear the program first
(see page 39).
“SYSTEM” and “COMPO”
flash.
4 Select “SYSTEM” by
pressing the Label Select
button.
SYSTEM
SET
SYSTEM
COMPO
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo3ad5.
Exe cu t in g a Se rie s o f Co m m a n d s
— Syst e m Co n t ro l Fu n ct io n s
(co n t in u e d )
7 Press the Label select
button(s) or other button(s)
on the Commander for the
desired operation.
6 Select the component to
operate by pressing the
Label Select button (in this
case, TV).
To change the labels, press the
SCROLL button repeatedly.
If you want to turn on the TV,
press the POWER button.
SYSTEM
SET
8 Repeat Steps 6 and 7 and
program the buttons for the
series of operations.
SYSTEM2
TV
In this example, press the
following buttons.
SAT
CABLE
DVD
VCR1
AMP
The selected component name
is displayed on the bottom of
the LCD display, and the labels
for the operation of the
component are displayed. To
change the labels, press the
SCROLL button repeatedly.
TV
VCR1
SYSTEM
SET
SYSTEM2
PIP SWAP
PIP MOVE
PIP CH+
PIP CH-
TV
9 When you have
programmed all the keys
and buttons, press the SET
button.
With a beep sound, a series of
operating commands is
registered.
The display returns to Step 5.
To select another component,
press the COMPO button.
If yo u p re ss t h e SET b u t t o n
The display returns to the previous
one.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
No t e s
Ab o u t t h e o rd e r o f o p e ra t io n
st e p s
• If you interrupt the procedure at any
point for over two minutes, the setup
procedure will be canceled. In this
case, set the entire program from the
beginning.
• If you change the component code
number (page 13) or program a new
signal by learning (page 23) on a label
that has been programmed in the
series of commands of the System
Control function, the new signal is
transmitted when you press the Label
Select button corresponding to the
system number label.
Some of the components may not
accept consecutive remote control
signals. For example, a TV generally
does not react to next signal right after
the Power-on signal. So, a series of
commands such as TV Power-on and
input select may not work properly. In
this case, insert other signals like the
example below;
TV Power-on t VCR Power-on
t VCR play back t TV input select
To change the name of a System
Macro label on the display
You can change the display of the
labels on the display to the most
suitable name using up to 8
characters or digits.
1 In Step 5 (page 35), select the
System Macro label of which
name you want to change (for
example, SYSTEM4) by keeping
the Label Select button pressed
for more than 2 seconds.
• While programming a series of
operating commands, you cannot
clear any operation step you have
programmed. If you have
programmed an incorrect operation
by mistake, start again from Step 1.
• If you try to program more than 32
steps, the System Control setting
finishes, and the 32 steps you have
programmed are registered. If you
want to program again, clear the
program (page 39) and start again
from Step 1.
• The SCROLL button is not counted as
a step.
The Commander enters the
Label Input mode.
• When programming a power-on
command for the System Control
function, if you select the component
label for which you programmed the
Power-On setting (page 44), the
Power-On setting is also available. So,
the power of the selected component
turns off if the POWER key of the
component is programmed.
SYSTEM
SET
SYSTEM
In this case, clear the Power-on
setting, or do not program the
POWER key of the component.
SYSTEM4
Ab o u t t h e in t e rva l b e t w e e n
o p e ra t io n st e p s
• You can change the interval between
operation steps (page 42).
• If you cannot receive signals
successfully during consecutive
operation steps, program an interval
of 250 ms between steps by pressing
the TIMER button between operation
steps in Step 8 on page 36. This
operation of programming an
interval is counted also as a step.
2 Input the name of the label.
Follow Steps 3 - 5, on pages 27-
28.
3 Press the SET button.
The commander goes to Step 6
on page 36.
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo3ad7.
Exe cu t in g a Se rie s o f Co m m a n d s
— Syst e m Co n t ro l Fu n ct io n s
(co n t in u e d )
Notes on System Control
Operations
• If the remote control detectors of
the components are too far apart,
or if something is blocking them,
some of the components may not
operate consecutively even after
you select the System Macro
number label.
• If some of the components did
not operate correctly because of
the above or for any other
To clear the System Macro of a
label
In Step 5 (page 35), while pressing
the Label Select button
corresponding to the label that
you want to erase, press the
SCROLL button. (The labels for
which the System Macro is
programmed stay lit.)
“CLEAR OK” appears and the
System Macro is cleared with a
beep sound.
reason, always set all the
components back to the states
they were in before you select
the System Macro number label.
Failure to do this can result in
incorrect operation when you
select the System Macro number
label again.
• Some components may not
always be powered on by the
System Control function. This is
because the power of the
The cleared label flashes together
with other labels which have no
System Macro data.
If t h e ch a ra ct e r co n t e n t s o f t h e
la b e l h a ve b e e n ch a n g e d
To clear the character contents of that
label, perform the same procedure
above again. The input contents are
cleared and the label display returns to
the original setting.
Wh e n yo u cle a r t h e Syst e m
Ma cro o ve rw rit t e n o ve r t h e
SONY OFF la b e l
The overwritten System Macro is
cleared when you perform the
procedure above and the factory
presetting returns to the SONY OFF
label.
component goes on and off
alternatively when receiving the
power on/ off signal. In this case,
check the operating component’s
power on/ off state before using
the system control function.
If the character contents of the SONY
OFF label have been changed, the
character contents are cleared when
you perform the procedure above
again. The input contents are cleared
and the label display returns to “SONY
OFF.”
No t e
When you select the label for which the
System Macro is programmed, the ‘NG’
sound is heard. If you release the Label
Select button then, data is not cleared
and the System Macro signal is
transmitted.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
To clear programmed
commands for a specific
System Macro number label
You can clear the System Macro
and the character contents you
have programmed for a label.
3 Select “CLEAR” by
pressing the Label Select
button.
SET
POWER ON
COPY
1 Keep the SET button
pressed for more than a
second.
CLEAR
SYSDELAY
“SET” appears on the LCD
display.
4 Select “SYSTEM” by
pressing the Label Select
button.
2 Press the SCROLL button
twice to display “CLEAR”
on one of the labels.
SET
CLEAR
COMPO
SYSTEM
TIMER
ALL
SET
POWER ON
COPY
“SYSTEM” appears on the LCD
display, and the system macro
numbers are displayed on the
labels. To change the labels
(SONY OFF, SYSTEM2- 12),
press the SCROLL button
repeatedly.
CLEAR
SYSDELAY
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo3ad9.
Exe cu t in g a Se rie s o f Co m m a n d s
— Syst e m Co n t ro l Fu n ct io n s
(co n t in u e d )
Programming a series of
commands for the
component labels
5 Select the macro number of
which System Control
function you want to erase
by pressing the Label Select
button.
You can also program a series of
operating commands (component
macro) for the component labels
(up to 32 steps).
To execute a series of operating
commands for a component label,
proceed as follows.
SYSTEM
SET
1 When the display for
CLEAR
component operation appears
(if not, press the SET button
repeatedly), press the COMPO
button.
2 Select the component label by
pressing the Label Select button
for more than a second.
SONY OFF
SYSTEM2
SYSTEM3
SYSTEM4
No t e s
• The programmed commands are
executed when you select a
component label by pressing the
Label Select button for more than a
second.
Wh ile e ra sin g
When you press the Label Select
button for less than a second, the
selected label works as the normal
component label, and the
corresponding function labels are
displayed.
• The component macro executing time
is variable by changing the setting
(page 43).
SYSTEM
SET
CLEAR
COMPLETE
R
R
R
R
R
R
R
R
R
• See also “About the interval between
operation steps” on page 37 and
“Notes on System Control
Operations” on page 38.
SYSTEM2
When erasing finishes,
“COMPLETE” is displayed
with a beep sound.
If yo u w a n t t o e ra se t h e
se t t in g s o f o t h e r m a cro
n u m b e rs
Repeat Step 5.
6 Press the SET button.
The display returns to the previous
one.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
To clear the component macro
of a label
In Step 2 (page 41), while pressing
1 In Step 4 (page 35), select
“COMPO” by pressing the
Label Select button.
the Label Select button
corresponding to the label that
you want to erase, press the
SCROLL button. (The labels for
which a series of commands is
programmed stay lit.)
“CLEAR OK” appears and the
component macro is cleared with a
beep sound.
SYSTEM
SET
SYSTEM
COMPO
The cleared label flashes together
with other labels for which a series
of commands is not programmed.
No t e
Component names are
displayed. The labels for which
a series of commands is
programmed stay lit and others
flash.
When you select the label for which a
series of commands is programmed,
the ‘NG’ sound is heard. If you release
the Label Select button then, data is not
cleared and the component macro
signal is transmitted.
2 Select the component for
which you want to program
a series of commands by
pressing the Label Select
button (for example, DVD).
SYSTEM COMPO
SET
SYSTEM
TV
SAT
CABLE
DVD
3 Program a series of
commands for the
component label by
following the same
procedure of Step 6-8 on
page 36.
4 Press the SET button.
With a beep sound, a series of
operating commands is
registered.
The display returns to Step 2
above.
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo4ad1.
Exe cu t in g a Se rie s o f Co m m a n d s
— Syst e m Co n t ro l Fu n ct io n s
(co n t in u e d )
The current interval setting
stays lit. The factory setting is
150 ms. (ms: 1/ 1000 second)
5 Select the interval by
pressing the Label Select
button.
Changing the interval
between operation steps
You can control the interval from
150- 900 ms.
SET
SYSDELAY
1 Keep the SET button
pressed for more than a
second.
150ms
400ms
650ms
900ms
2 Press the SCROLL button
twice to display
INTERVAL
“SYSDELAY” on one of the
labels.
With a beep sound, the setting
is changed.
3 Select “SYSDELAY” by
pressing the Label Select
button.
SET
SYSDELAY
150ms
SET
400ms
650ms
POWER ON
COPY
900ms
INTERVAL
CLEAR
SYSDELAY
6 Press the SET button.
The display returns to Step 4.
4 Select “INTERVAL” by
pressing the Label Select
button.
SET
SYSDELAY
INTERVAL
TIME
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the component
macro executing time
COMPO
SET
SYSDELAY
0sec
1sec
1 Follow the procedure of
2sec
Steps 1-3 on page 42.
TIME
2 Select “TIME” by pressing
the Label Select button.
4 Press the SET button.
SET
The display returns to Step 2.
SYSDELAY
INTERVAL
TIME
The current component macro
executing time stays lit. The
factory setting is 1 sec.
3 Select the component macro
executing time by pressing
the Label Select button.
COMPO
SET
SYSDELAY
0sec
1sec
2sec
TIME
With a beep sound, the setting
is changed.
Download from Www.Somanuals.com. All Manuals Search And Downlo4ad3.
Example: To program the TV
label
Adding an Extra
Function to the
Component Labels
1 Keep the SET button
pressed for more than a
second.
Programming the Power-On
command of a selected
component (for Sony
components only)
“SET” appears on the LCD
display.
When using Sony components,
you can program the Power-On
signal for each component on a
component label. You can select
the desired component and turn it
on by just selecting that label after
pressing the COMPO button.
2 Press the SCROLL button
twice to display “POWER
ON” on one of the labels.
2
3
SET
COMPO
SYSTEM
POWER ON
COPY
TIMER
4
SCROLL
POWER
SET
CLEAR
SYSDELAY
REC
1,5
VIDEO1
TUNER
MD
VIDEO2
CD
AUX
TAPE
TV
PHONO
3 Select “POWER ON” by
pressing the Label Select
button.
DVD
MENU
GUIDE
SET
VOL
CH
POWER ON
COPY
CLEAR
MUTING
RECALL
SYSDELAY
“POWER ON” appears on the
LCD display, and component
names are displayed on the
labels.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
The display of the component
names (preset by Sony) for
which you can program the
Power-on signal flashes. The
display of the other
5 Press the SET button.
The display returns to the
previous one.
components stays lit.
To clear the Power-On command
Follow the same procedure as
Steps 1- 5 on pages 44- 45.
The selected component name
appears on the bottom of the LCD
display. A beep sound is heard,
and “OFF” lights.
4 Select the desired
component by pressing the
Label Select button.
(To change the labels, press the
SCROLL button repeatedly. )
SET
SET
POWER ON
POWER ON
TV
SAT
CABLE
DVD
OFF
DVD
The selected component name
appears at the bottom of the
LCD display.
A beep sound is heard, and
“ON” lights.
No t e
If the component code of a non-Sony
product has been set for a component
label, you cannot program the Power-
On function for it.
SET
POWER ON
ON
DVD
The display returns to Step 4.
If yo u se le ct a co m p o n e n t
fo r w h ich t h e Po w e r-o n
sig n a l ca n n o t b e
p ro g ra m m e d
“NG” appears and the ‘NG’ sound
is heard twice. And the display
returns to Step 4.
Download from Www.Somanuals.com. All Manuals Search And Downlo4ad5.
Example: To copy the settings of
the DVD label to the VCR1 label
Assigning Other
Components to the
Component Labels
1 Keep the SET button
pressed for more than a
second.
Copying the settings of
a component label to
another label
“SET” appears on the LCD
display.
You can copy the entire settings of
a component label. The settings of
the component code (page 13), the
channel macro function (page 48),
the learned functions (page 23),
component macro function (page
40), Power-On command (page 44)
and character contents are copied
to a new label.
2 Press the SCROLL button
twice to display “COPY” on
one of the labels.
No t e s
• You cannot copy the settings to a
component label for which any
learned function, channel macro
function or component macro
function has been programmed.
(“NG” appears.)
3 Select “COPY” by pressing
the Label Select button.
• The character contents are
overwritten over a new label.
SET
POWER ON
COPY
2
COMPO
CLEAR
SYSTEM
SYSDELAY
3
TIMER
SCROLL
4,5
POWER
SET
“COPY” appears on the LCD
display, and component names
are displayed on the labels.
REC
1,6
VIDEO1
TUNER
MD
VIDEO2
CD
AUX
TAPE
TV
PHONO
4 Select the Component of
which the contents are to be
moved by pressing the
Label Select button.
DVD
MENU
GUIDE
(To change the Label buttons
press the SCROLL button
repeatedly.)
VOL
CH
MUTING
RECALL
46
Download from Www.Somanuals.com. All Manuals Search And Download.
If yo u se le ct a Co m p o n e n t
la b e l fo r w h ich a n y ch a n n e l
m a cro , le a rn in g , co m p o n e n t
m a cro fu n ct io n h a s b e e n
p ro g ra m m e d
“NG” appears and the ‘NG’
sound is heard twice. And the
display returns to Step 5.
SET
COPY
TV
SAT
CABLE
DVD
6 Press the SET button.
The display returns to the previous
one.
The selected component name
appears at the bottom of the
LCD display.
To return to the original setting
Follow the steps in “To clear the
contents programmed for a
specific component label”, page
19.
5 Select the component to
which the contents are to be
moved by pressing the
Label Select button.
(To change the labels press the
SCROLL button repeatedly.)
SET
COPY
TV
SAT
CABLE
DVD
DVD
The selected component name
appears on the first label of the
LCD display.
The copying begins.
SET
COPY
SAT
R
R
R
DVD
With a beep sound, the copying
finishes.
Download from Www.Somanuals.com. All Manuals Search And Downlo4ad7.
Example: To program TV channel
123 for the PIP CH+ key
Selecting a Channel
with a Single Label
— Ch a n n e l Ma cro Fu n ct io n
1 Keep the SET button
pressed for more than a
second.
You can program the Channel
Macro function of the components
of which the first digit of the four-
digit preset component code
number is 3 (SAT, DVR and a
digital cable box), 8 (TV) or 9
(CABLE).
“SET” appears on the LCD
display.
And you can program the
Channel Macro function for the
macro labels for a component
again to send data.
If you program the operation of
entering the 1, 2, 3 and ENT
buttons for a macro label, you can
select channel 123 by selecting that
single label.
2 Press the SCROLL button
once to display “CH
MACRO” on one of the
labels.
SET
2
4,5
3
COMPO
SYSTEM
TIMER
SYSTEM
TIMER
CH MACRO
VOLUME
SCROLL
POWER
SET
REC
1,7
VIDEO1
TUNER
MD
VIDEO2
CD
AUX
TAPE
3 Select “CH MACRO” by
pressing the Label Select
button.
TV
PHONO
6
DVD
MENU
GUIDE
SET
SYSTEM
TIMER
VOL
CH
CH MACRO
VOLUME
MUTING
RECALL
“CH MACRO” appears on the
LCD display, and component
names are displayed on the
labels.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
The component names on the
labels for which the Channel
Macro function can be
programmed flash and the
others stay lit. To change the
labels, press the SCROLL
button repeatedly.
5 Select the macro label by
pressing the Label Select
button.
SET
CH MACRO
PIP SWAP
PIP MOVE
PIP CH+
PIP CH-
TV
4 Select the Component by
pressing the Label Select
button.
SET
CH MACRO
TV
The selected label stays lit.
Other labels disappear.
SAT
CABLE
DVD
If yo u se le ct t h e la b e l fo r
w h ich t h e Ch a n n e l Ma cro
fu n ct io n ca n n o t b e
p ro g ra m m e d
The ‘NG’ sound is heard.
The selected component name
appears. The macro labels
flash. (To change the labels,
press the SCROLL button
repeatedly.)
6 Press the number buttons
for the operation and the
ENT button in order (1t 2
t 3 t ENT).
“1,” “2,” “3,” and “ENTER”
appear twice. The numbers are
decided.
SET
CH MACRO
No t e s
PIP SWAP
PIP MOVE
PIP CH+
PIP CH-
TV
• If you enter three or less numbers,
press the number buttons and the
SET button in order. The numbers
are decided for the macro label.
• If you enter four numbers, the
four numbers are decided for the
macro label.
If yo u se le ct t h e co m p o n e n t
n a m e fo r w h ich t h e Ch a n n e l
Ma cro fu n ct io n ca n n o t b e
p ro g ra m m e d
The ‘NG’ sound is heard.
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo4ad9.
Se le ct in g a Ch a n n e l w it h a
Sin g le La b e l — Ch a n n e l Ma cro
Fu n ct io n (co n t in u e d )
To clear the Channel Macro of a
label
In Step 5 (page 49), while pressing
the Label Select button
corresponding to the label that
you want to erase, press the
SCROLL button. (The labels for
which the Channel Macro is
programmed stay lit.)
“CLEAR OK” appears and the
Channel Macro is cleared with a
beep sound.
The cleared label flashes together
with other labels which have no
Channel Macro data. The display
returns to the Channel Macro label
selecting mode.
7 Press the SET button.
The display returns to the
previous one.
No t e
You cannot program the Channel
Macro function for a macro label that
has “learned” a signal. Try again with
another macro label, or clear the
“learned” signal (page 29) and program
the Channel Macro function on it.
To change the name of the
Channel Macro labels on the
display
If the character contents of the
label have been changed
To clear the character contents of
that label, perform the same
procedure above again. The input
contents are cleared and the label
display returns to the original
setting.
You can change the display of the
labels on the display to the most
suitable name using up to 8
characters or digits.
1 In Step 5 (page 49), select the
Channel Macro label of which
name you want to change (for
example, PIP CH+) by keeping
the Label Select button pressed
for more than 2 seconds.
No t e
When you select the label for which the
Channel Macro is programmed, the
‘NG’ sound is heard. If you release the
Label Select button then, data is not
cleared and the System Macro signal is
transmitted.
The Commander enters the
Label Input mode.
SET
CH MACRO
PIP CH+
TV
2 Input the name of the label.
Follow Steps 3 - 5, on page 27-
28.
3 Press the SET button.
The Commander goes to Step 6
on page 49.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Example: To set the timer
program at 7:30 AM on Saturday
to the PROG4 label
Setting the Timer
Up to 12 timer setting programs
can be set on this commander. You
can program the timer setting of
the day of the week, the hour, the
minute and the contents of the
program (Timer Macro) weekly or
daily. You can set each program of
the timer to be executed or not.
1 Keep the SET button
pressed for more than a
second.
“SET” appears on the LCD
display.
There are two ways to set the
timer, as shown.
- Setting the new timer program
- Changing the program already
set or changing another program
that you select (page 56)
2 Press the SCROLL button
once to display “TIMER”
on one of the labels.
3 Select “TIMER” by pressing
the Label Select button.
Setting the new timer
program
SET
10,11
2
SYSTEM
TIMER
4,10,11
CH MACRO
VOLUME
COMPO
6
SYSTEM
TIMER
3,7
SCROLL
5
POWER
SET
9
“TIMER” appears on the LCD
display, and the timer program
numbers are displayed on the
labels. To change the labels
(PROG 1- 12), press the
REC
1,13
VIDEO1
TUNER
MD
VIDEO2
AUX
TAPE
CD
TV
PHONO
SCROLL button repeatedly.
DVD
SET
MENU
GUIDE
TIMER
PROG1
PROG2
PROG3
PROG4
8
VOL
CH
MUTING
RECALL
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo5ad1.
Se t t in g t h e Tim e r (co n t in u e d )
5 Select “SETUP” by pressing
the Label Select button.
The program numbers having
timer setting programs which
are set to be executed (standby
mode) stay lit.
SET
PROG4
The program numbers having
timer setting programs which
are set not to be executed flash.
The program numbers without
timer setting programs flash.
ON/OFF
TEST
SETUP
COPY
4 Select the program number
to which you want to set
the timer by pressing the
Label Select button.
“SUN,” “12:00 AM,” and
“MACRO” are displayed.
If the day of the week and the
time for the timer program are
set in this setting mode, or if
you try changing the program
already set (page 56), the set
contents are displayed.
SET
TIMER
PROG1
PROG2
PROG3
PROG4
6
Select the first label (the
day of the week) by
pressing the Label Select
button, and set the timer-on
day(s) of the week by
pressing the Joystick
The selected program number
appears. (If the selected label
has character contents you
input, the character contents
appear.)
toward or
.
SET
PROG4
“ON/ OFF,” “TEST,” “SETUP,”
and “COPY” appear on the
labels.
SUN
12:00 AM
When the timer program of the
selected number is set to be
executed (standby mode),
“ON/ OFF” and “TEST” flash.
When the timer program of the
selected number is set not to be
executed, “ON/ OFF,” “TEST,”
“SETUP” and “COPY” flash.
When the selected number has
no timer program data,
MACRO
“SETUP” and “COPY” flash.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Each time the Joystick is
7 Select the second label
(time) by pressing the Label
Select button.
pressed toward
or , the
display of day(s) of the week
changes as follows.
EVERYDAY
MON-SAT
MON-FRI
SUN SAT
SUN
SET
PROG4
SAT
12:00 AM
MACRO
8 Set the hour by pressing the
or (page 10). Then
MON
press the Joystick toward
so that the minute flashes.
(You can switch the mode
between the hour setting
and the minute setting by
pressing the Joystick
TUE
WED
toward or .)
Set the minute by pressing
THU
the Joystick toward
(page 10).
Then press down the
Joystick.
or
FRI
SAT
The time of the timer
setting is decided.
SUN : Sunday
MON : Monday
TUE : Tuesday
WED : Wednesday
THU : Thursday
FRI
: Friday
SAT : Saturday
MON-SAT: from Monday to
Saturday
MON-FRI: from Monday to
Friday
SUN SAT: Sunday and
Saturday
EVERYDAY:daily timer
Then press down the Joystick
to decide the day(s).
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo5ad3.
If yo u w a n t t o p ro g ra m t h e
Syst e m Ma cro d a t a fo r t h e
t im e r
Se t t in g t h e Tim e r (co n t in u e d )
Press the SYSTEM button.
System macro numbers are
displayed on the labels. Select the
system label of which information
you want to program for the timer.
Go to Step 12.
9 Select “MACRO” by
pressing the Label Select
button.
SET
SYSTEM
SET
PROG4
SAT
PROG4
7:30 AM
SONY OFF
SYSTEM2
SYSTEM3
SYSTEM4
MACRO
The Commander enters the
Timer Macro setting mode.
11 Press the Label Select
button or other button on
the Commander of which
the function you want to
program as a step. (To
change the labels, press the
SCROLL button
10 Program the information of
the corresponding labels as
a procedure to be executed
by the timer.
If yo u w a n t t o p ro g ra m t h e
co m p o n e n t fu n ct io n fo r t h e
t im e r
Select the component name.
Functions for the component are
displayed on the labels. (To change
the labels, press the SCROLL button
repeatedly.) Go to step 11.
repeatedly.)
COMPO
SET
PROG4
PIP SWAP
PIP MOVE
PIP CH+
PIP CH-
TV
COMPO
SET
PROG4
TV
SAT
CABLE
DVD
If yo u w a n t t o p ro g ra m t h e
fu n ct io n o f a n o t h e r
co m p o n e n t
Press the COMPO button, and
return to Step 10.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
No t e s
• When using the timer setting on this
Commander, only one setting can be
assigned to one program. If you want
to set the timer to turn on at a
programmed time, and to set the
timer to turn off at another time,
program the two settings separately.
• If there are some programs set to be
executed at the same time, they start
in order from the lowest program
number.
• According to the status of the
component operated by the timer
program, the next program might not
function successfully. When setting a
timer program, check carefully the
setting of other programs.
• Some programs cannot be executed at
the set time because the execution
time of the remote control output is
different depending on the contents
of the timer execution. Or, if the
execution time arrives while the
previous timer program is outputted,
the timer program begins after the
execution of the previous one. In this
case also, the program cannot be
executed at the set time. So, set the
timer regarding the contents and the
duration of the timer execution.
12 Repeat Steps 10 and 11.
When 32 steps are input, the
Macro step programming
registered with a beep sound.
Then the display returns to
step 6.
No t e s
• You can input up to 32 steps for one
timer program number.
• A System Macro can be input as a
step.
• You can change the interval between
operation steps (page 42).
• The step of the TIMER button has an
interval of 250ms. This operation of
programming an interval is counted
also as a step.
• The SCROLL button is not counted as
a step.
13 When you have
programmed a series of
Timer Macro setting, press
the SET button.
With a beep sound, a series of
Timer Macro settings are
registered.
The display returns to Step 6.
Each time you press the SET
button, the display returns to
the previous one.
If yo u w a n t t o ch e ck t h e
e xe cu t io n o f t h e t im e r
se t t in g o r se t t h e t im e r
p ro g ra m t o t h e st a n d b y
m o d e
See page 58.
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo5ad5.
Se t t in g t h e Tim e r (co n t in u e d )
Changing the program
already set or changing
another program that you
select
To ch a n g e t h e n a m e o f t h e
Tim e r Ma cro la b e ls o n t h e
d isp la y
You can change the display of the labels
on the display to the most suitable
name using up to 8 characters or digits.
1 Follow Steps 1 - 4 on page
1
In Step 4 (page 52), select the Timer
Macro label of which name you
want to change (for example,
PROG4) by keeping the Label Select
button pressed for more than 2
seconds.
51- 52.
2 Select “COPY” by pressing
the Label Select button.
The Commander enters the Label
Input mode.
If you want to change the
program already set, go to Step
5 without pressing the COPY
key.
SET
TIMER
SET
PROG4
ON/OFF
TEST
PROG4
SETUP
COPY
2
3
Input the name of the label.
Follow Steps 3 - 5, on page 27 - 28.
Press the SET button.
The display goes to Step 5 on page
52.
The program numbers appear.
Numbers which have the timer
setting information flashes. The
others stay lit.
3 Press the SCROLL button
repeatedly until the
program number (PROG 1-
12) of which the contents
you want to change
appears.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the Label Select
button of the program
number of which the
contents you want to
change.
6 Press the Label Select
button of the label of which
contents you want to
change.
Day: See Step 6 on page 52.
Time: See Step 7 on page 53.
MACRO: The display appears
as below.
SET
PROG4
PROG1
PROG2
PROG3
PROG4
COPY
SET
PROG4
EVERYDAY
11:30 AM
OK?
NG?
MacroCLR
With a beep sound, the
contents of the selected
program (in this case, PROG1)
are copied to the program
number displayed on the top of
the display (in this case,
PROG4).
7 Select “OK?” by pressing
the Label Select button.
With a beep sound, the Timer
Macro setting is cleared, and
the Commander enters the
Timer Macro setting mode
(Step 10 on page 54).
5 Select “SETUP” by pressing
the Label Select button.
SET
If yo u se le ct “ NG?”
The display returns to the setting
up mode.
PROG4
ON/OFF
TEST
No t e
SETUP
COPY
You cannot change the Timer Macro
setting partially. If you want to
change the program without
clearing the frequently used
procedure, use the System Control
function (page 34). For example, if
Steps A to D are frequently used
when you want to program Steps
A, B, C, D and E, program Steps A
to D using the system macro. Then
program Step E in the Timer Macro,
combining it with that System
Macro.
The display turns to the setting
up mode of the timer.
SET
PROG4
SUN
12:00 AM
MACRO
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo5ad7.
Se t t in g t h e Tim e r (co n t in u e d )
To switch the timer standby
mode to on or off
To check the execution of the
timer program
1 In Step 4 (page 52), select
the program number
1 Follow Steps 1 - 4 on page
having a timer setting
program by pressing the
Label Select button.
51 - 52.
2 Select “TEST” by pressing
the Label Select button.
2 Select “ON/ OFF” by
pressing the Label Select
button.
SET
The timer standby mode will
be switched as follows.
PROG4
ON/OFF
TEST
Wh e n t h e se le ct e d p ro g ra m
n u m b e r o f w h ich t h e
st a n d b y m o d e is se t t o o n
SETUP
COPY
SET
TIMER
PROG4
ON/OFF
TEST
You can check the timer
program setting by
transmitting the Timer Macro
signals.
SETUP
COPY
3 Press the SET button.
The display returns to the previous
one.
The timer standby mode will
be set to off.
SET
PROG4
ON/OFF
TEST
SETUP
COPY
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Wh e n t h e se le ct e d p ro g ra m
n u m b e r o f w h ich t h e
st a n d b y m o d e is se t t o o ff
To switch quickly the timer
standby mode to on or off using
the TIMER button
SET
1 When the display for
component operation
PROG4
ON/OFF
TEST
appears (if not, press the
SET button repeatedly),
press the TIMER button.
SETUP
COPY
The timer standby mode will
be set to on.
“TIMER” and the program
numbers appear.
(To change the labels, press the
SCROLL button repeatedly.)
SET
TIMER
PROG4
ON/OFF
TEST
SET
TIMER
PROG1
SETUP
COPY
PROG2
PROG3
PROG4
10:00 AM
3 Press the SET button.
The program number of which
the standby mode is set to on
stays lit.
The display returns to the
previous one.
The program number of which
the standby mode is set to off
flashes.
The number which has no
timer program data flashes.
2 Select the program number
of which the standby mode
you want to switch by
pressing the Label Select
button.
Each time the Label Select
button is pressed, the standby
mode is switched between on
and off.
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo5ad9.
Se t t in g t h e Tim e r (co n t in u e d )
To clear timer settings
programmed for a specific
program number label
SET
TIMER
PROG1
1 Keep the SET button
pressed for more than a
second.
PROG2
PROG3
PROG4
10:00 AM
“SET” appears on the LCD
display.
If yo u se le ct t h e p ro g ra m
n u m b e r w h ich h a s n o t im e r
p ro g ra m d a t a
2 Press the SCROLL button
twice to display “CLEAR”
on one of the labels.
The ‘NG’ sound is heard.
3 When you finish the setting
of the timer standby mode,
press any button other than
the SCROLL and Label
Select button.
The display turns to the
component operating mode.
SET
POWER ON
COPY
The “TIMER” mark stays lit on
the display. This means that
one or more timer programs
are set to the timer standby
mode.
CLEAR
SYSDELAY
No t e s
• If the TEST or ON/ OFF label is
selected when the timer program is
not set, the ‘NG’ sound is heard
twice.
• The timer program contents you have
set on this Commander repeat daily
or weekly until you set the timer
standby mode to off. If you want to
execute the timer program once, set
the timer standby mode to off after
the execution of the timer program.
3 Select “CLEAR” by
pressing the Label Select
button.
SET
POWER ON
COPY
IMPORTANT
The timer function of this
Commander is designed for the
timer operation of AV
CLEAR
SYSDELAY
components. Do not use the
timer function to operate an air-
conditioner or electrical
appliances. It may cause a fire
or a serious injury.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
If yo u w a n t t o e ra se t h e
se t t in g s o f o t h e r t im e r
p ro g ra m n u m b e rs
Repeat Step 5.
4 Select “TIMER” by pressing
the Label Select button.
6 Press the SET button.
SET
The display returns to the previous
one.
CLEAR
COMPO
SYSTEM
TIMER
ALL
The timer program numbers
are displayed on the labels. To
change the labels
(PROG 1- 12), press the
SCROLL button repeatedly.
5 Select the program number
of which timer contents you
want to erase by pressing
the Label Select button.
SET
TIMER
CLEAR
PROG1
PROG2
PROG3
PROG4
Wh ile e ra sin g
SET
TIMER
CLEAR
COMPLETE
R
R
R
R
R
R
R
R
R
PROG1
When erasing finishes,
“COMPLETE” is displayed
with a beep sound.
Download from Www.Somanuals.com. All Manuals Search And Downlo6ad1.
Usin g Ot h e r Fu n ct io n s
When the controls are locked
Even if you press a button (except
when the POWER button and the
SCROLL button are pressed at the
same time), the Commander does
not operate. When the timer is set
to be executed, “TIMER” stays lit.
Locking the Controls
— Ho ld Fu n ct io n
To prevent accidental operation,
you can lock all the buttons with
the Hold function. However, the
timer functions while the controls
are locked.
To unlock the controls
While pressing the POWER
button, press the SCROLL button.
With a key-touch beep, the display
returns to the status before setting
of the Hold function.
While pressing the POWER
button, press the SCROLL
button.
With a beep sound, “LOCK”
appears, and every LCD display
disappears except the clock and
“LOCK.”
TIMER
LOCK
10:00 AM
62
Download from Www.Somanuals.com. All Manuals Search And Download.
1 While pressing the POWER
button, press the GUIDE
button.
Adjusting the
Automatic-Off Time
of the Backlight of
the Display Window
The Commander is preset at the
factory to brighten the backlight,
and to switch off the backlight
automatically if you do not
operate for more than 5 seconds.
To change this setting, perform the
following procedure.
You can adjust the backlight
Automatic-Off time (from 0-60
seconds).
“LIGHT” appears on the LCD
display, and the list of
Automatic-Off time of the
backlight is displayed on the
labels.
The Automatic-Off time of the
backlight actually set stays lit,
and the others flash.
COMPO
LIGHT
0sec
SYSTEM
2
TIMER
5sec
SCROLL
10sec
20sec
POWER
SET
1
REC
VIDEO1
TUNER
MD
VIDEO2
AUX
TAPE
CD
TV
To change the labels, press the
SCROLL button repeatedly.
Each time the SCROLL button
is pressed, the labels change as
follows.
PHONO
DVD
MENU
GUIDE
0sec
5sec
VOL
CH
10sec
20sec
MUTING
RECALL
30sec
40sec
50sec
60sec
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo6ad3.
Ad ju st in g t h e Au t o m a t ic-Off
Tim e o f t h e Ba cklig h t o f t h e
Disp la y Win d o w (co n t in u e d )
Setting the Key-
Touch Beep
The Commander is preset at the
factory to turn on the key-touch
confirmation beep. You can turn
on or off the key-touch
2 Select the desired
Automatic-Off time of the
backlight by pressing the
Label Select button.
confirmation beep.
LIGHT
30sec
40sec
50sec
60sec
1 While pressing the POWER
button, press the VOL+
button to turn on the key
touch beep.
The set Automatic-Off time of
the backlight appears.
2 While pressing the POWER
button, press the VOL–
button to turn off the key
touch beep.
LIGHT
50sec
With a beep sound, the
Automatic-Off time of the
backlight is decided and the
setting finishes.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the
Contrast of the
Display Window
Changing the Names
of the Labels on the
Display
You can adjust the contrast of the
display window.
You can change the display of the
component names, the function
displays of components, the
system macro numbers (SONY
OFF, SYSTEM2 - 12) and timer
program numbers (PROG1 - 12)
on the labels to the most suitable
name using up to 8 characters or
digits.
1 While pressing the POWER
button, press the CH+
button to increase the
contrast of the display
window.
COMPO
SYSTEM
3
2
TIMER
SCROLL
POWER
SET
2 While pressing the POWER
button, press the CH–
button to decrease the
contrast of the display
window.
REC
VIDEO1
TUNER
MD
VIDEO2
CD
AUX
TAPE
1,5
4
TV
PHONO
DVD
MENU
GUIDE
VOL
CH
MUTING
RECALL
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo6ad5.
Ch a n g in g t h e Na m e s o f t h e
La b e ls o n t h e Disp la y
(co n t in u e d )
3 Select the label (COMPO,
SYSTEM or TIMER) by
pressing the Label Select
button.
1 Keep the SET button
pressed for more than a
second.
COMPO:
Displays component names.
To change the labels, press the
SCROLL button.
Select the component of which
name you want to change (for
example, TV) by pressing the
Label Select button.
“SET” appears on the LCD
display.
2 Select “LABEL” by pressing
COMPO
SET
the Label Select button.
LABEL
TV
SET
SAT
CABLE
DVD
PRESET
LEARN
LABEL
CLOCK
The Commander enters the
Label Input mode of the
component name. Go to Step 4.
The Commander enters the
Label Input mode.
COMPO
SET
LABEL
SET
PIP SWAP
PIP MOVE
PIP CH+
PIP CH-
TV
LABEL
COMPO
SYSTEM
TIMER
66
Download from Www.Somanuals.com. All Manuals Search And Download.
If yo u w a n t t o ch a n g e t h e
n a m e o f t h e fu n ct io n la b e l
o f e a ch co m p o n e n t
SYSTEM
SET
After selecting the component (for
example, TV), select the component
function of which name you want
to change by pressing the Label
Select button (for example, PIP
CH+). (To change the labels, press
the SCROLL button.)
LABEL
SONY OFF
SYSTEM2
SYSTEM3
SYSTEM4
COMPO
SET
The Commander enters the
Label Input mode of the
system macro name. Go to Step
4.
LABEL
PIP SWAP
PIP MOVE
PIP CH+
PIP CH-
TV
SYSTEM
SET
LABEL
The Commander enters the
Label Input mode of the
component function name. Go
to Step 4.
SYSTEM4
COMPO
SET
TIMER:
LABEL
Displays timer program
numbers.
To change the labels (PROG1 -
12), press the SCROLL button.
Select the timer program
number (for example, PROG4)
of which name you want to
change by pressing the Label
Select button.
PIP CH+
TV
SYSTEM:
Displays the system macro
numbers.
To change the labels (SONY
OFF, SYSTEM2 - 12), press the
SCROLL button.
Select the system macro
number (for example,
SYSTEM4) of which the name
you want to change by
pressing the Label Select
button.
SET
TIMER
LABEL
PROG1
PROG2
PROG3
PROG4
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo6ad7.
Ch a n g in g t h e Na m e s o f t h e
La b e ls o n t h e Disp la y
(co n t in u e d )
Erasing All the
Settings
You can erase all the settings to
reset the Commander to its factory
settings.
The Commander enters the
Label Input mode of the timer
program name. Go to Step 4.
SET
TIMER
COMPO
SYSTEM
TIMER
2
5
LABEL
SCROLL
SET
3
4
POWER
PROG4
REC
1,6
VIDEO1
TUNER
MD
VIDEO2
AUX
CD
TV
TAPE
PHONO
4 Input the name of the label
DVD
by pressing the Joystick
toward
,
,
or
.
MENU
GUIDE
Follow Steps 3 - 5, on page 27 -
28.
5 Press the SET button.
VOL
CH
The name of the label is
decided, and the display
returns to the previous one.
MUTING
RECALL
1 Keep the SET button
pressed for more than a
second.
“SET” appears on the LCD
display.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press the SCROLL button
twice to display “CLEAR”
on one of the labels.
5 Select “YES?,” by pressing
the Label Select button.
SET
CLEAR
YES?
NO?
SET
ALL
POWER ON
COPY
CLEAR
Wh ile e ra sin g
SYSDELAY
SET
CLEAR
COMPLETE
R
R
R
R
R
R
R
R
R
3 Select “CLEAR” by
pressing the Label Select
button.
ALL
SET
When erasing finishes,
“COMPLETE” is displayed with a
beep sound.
POWER ON
COPY
The Commander is reset to its
factory settings.
CLEAR
SYSDELAY
The display returns to Step 4.
If yo u se le ct “ NO?”
The display returns to Step 4.
6 Press the SET button.
The display returns to the previous
one.
4 Select “ALL” by pressing
the Label Select button.
SET
CLEAR
COMPO
SYSTEM
TIMER
ALL
Download from Www.Somanuals.com. All Manuals Search And Downlo6ad9.
Ad d it io n a l In fo rm a t io n
Precautions
Specifications
• Do not drop the unit or subject
the unit to shock as malfunction
may result.
• Do not leave the unit in a
location hear heat sources, or in
a place subject to direct sunlight,
excessive dust or sand, moisture,
rain or mechanical shock.
Op e ra t in g d ist a n ce
Approx. 32.8 ft. (10 meters) (varies
depending on components of
different manufacturers)
Po w e r re q u ire m e n t s
Remote control and backlight: Two
size AA (R6) batteries
Ba t t e ry life
Approx. 5 months (varies depending
on frequency of use)
• Do not put foreign objects into
the unit. Should any liquid or
solid object fall into the unit,
have it checked by qualified
personnel before operating the
unit any further.
Dim e n sio n s
Approx. 2 3/
4
× 8 5/
8
× 1 3/
16
in.
(w × h × d)
(69 × 217 × 30 mm)
Ma ss
• Do not expose the remote control
detectors of your components to
direct sunlight or other strong
illumination. Too much light in
such places can interfere with
remote control operations.
• Be sure to place the Commander
out of the reach of small children
or pets. Components such as air
conditioners, heaters, electric
appliances, and electric shutters
or curtains receiving an infrared
signal can be dangerous if
misused.
5.3 oz. (154 g) (not including batteries)
Le a rn a b le sig n a ls*
Capacity par signal: up to 300 bit
Signal frequency range: up to 156
kHz
Signal interval: up to 1 second
* Some signals cannot be learned by
the Commander, even though the
signals comply with these
specifications.
Design and specifications are subject to
change without notice.
The CE mark on the unit
is valid only for products
marketed in the
European Union.
Maintenance
Clean the surface with a soft cloth
slightly moistened with water or a
mild detergent solution. Do not
use any type of solvent such as
alcohol, benzine or thinner as it
may damage the finish of the
surface.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have problems setting up or using the Remote Commander, first
check the batteries (page 7), then check the items below.
Symptom
Remedy
You cannot operate the
components.
• Go closer to the component. The maximum operating
distance is approximately 32.8 ft. (10 m).
• Check that you are aiming the Commander directly at the
component, and that there are no obstructions between the
Commander and the component.
• Turn on the components first, if necessary.
• Check that the component has infrared remote capability. For
example, if your component didn’t come with a remote
commander, it probably isn’t capable of being controlled by a
remote commander.
• You have assigned a different component to the component
label. A corresponding component is fixed by presetting a
component code number. Therefore, the name of component
you have preset may be different from that of the component
label. In this case, it is recommended to preset again (page 13)
and change the component name on the label (page 27, 65).
You cannot operate the
components even after
setting the component
code numbers.
• Set the component code correctly. If the code that is listed first
for your component doesn’t work, try all the codes for your
component in the order in which they are listed in the
supplied “Component Code Numbers.”
• Some features may not be preset. If some or all of the buttons
do not function correctly even after you have set the
component codes, then use the learning function to program
the remote control signals for the component (page 23).
You cannot control the
volume.
• If your visual components are connected to an audio system,
make sure you’ve set up the Commander as described in
“Controlling the Volume of Visual Components Connected to
an Audio System” (page 30).
• You have assigned another component to the TV or AMP
label (page 46). In this case, the volume cannot be controlled
when you select a component other than TV or AMP.
The Commander fails to • When you teach signals of an interactive signal exchange
learn the remote control
signals.
system remote control unit (supplied with some of Sony’s
receivers and amplifiers) to the Commander, the response
signal of the main unit may interfere with the learning of the
Commander. In such a case, move to a place where the
signals will not reach the main unit (e.g. other rooms, etc.).
You cannot operate a
component even after
you programmed the
remote control signals
with the “learning”
function.
• Make sure that the Remote Commander has learned the
correct signals. If not, see “For accurate learning” (page 29)
and try the learning procedure again (page 23).
“NG” flashes five times. • Learning has not succeeded. After checking the following, try
learning procedure again (page 23).
- Change the distance between remote commanders.
- See “For accurate learning” (page 29).
• The component codes cannot be set. See the supplied
“Component Code Numbers” and try setting the component
codes again (page 13).
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo7ad1.
Tro u b le sh o o t in g (co n t in u e d )
Symptom
Remedy
“NG” flashes twice.
• Learned signals or the Channel Macro function have been
programmed for the component label to which you want to
copy the settings of another component label using the
copying function (page 46). Clear the contents (page 19, 29)
and try the copying procedure again.
• You may try to program the Power-On function (page 44) for
a component label to which the component code of a non-
Sony product has been set. This function is only for Sony
components.
The ‘NG’ sound is heard • Learned signals have been programmed for the label to which
twice.
you want to set the learning, Channel Macro or component
macro function. Clear the learned signals (page 19, 29) and try
setting again.
• You may select the component name for which the Channel
Macro function cannot be programmed. You can program the
Channel Macro function of the components of which the first
digit of the four-digit preset component code number is 3, 8
or 9 (page 48).
• You may select the component function label for which the
Channel Macro function cannot be programmed. The learned
signal or the Channel Macro function have been programmed
for that label. Clear the learned signal (page 29) or the
Channel Macro function (page 50).
• The program contents you want to change are set to be
executed by the timer. Set the timer setting in which that
program is included not to be executed (page 58), and edit the
program contents.
• You may try to operate the preset function (page 13) after
operating the learning function (page 23). You cannot operate
the preset function after operating the learning function.
Preset after clearing the learned signals (page 29), or preset to
another component label key that is not used.
“NG” appears during
• The memory is full. Clear infrequently used learned labels
learning.
(page 29), then carry out learning operations.
“NG” appears if you try • There are some function labels for the component for which
to copy the settings of the learned signals have been programmed. Copy the settings to
component label to
another component label, or clear the learned signals (page
another component label. 29).
A system control
program does not
function correctly.
• Make sure that you have programmed the commands in the
correct order (page 34).
• Try changing the orientation of the Commander. If that does
not help, try placing the components as close to each other as
possible.
• Check the status of the components and make sure that you
have set the components properly to receive commands (page
38).
• The component codes are changed or new signals have been
learned for a label that has been programmed with a series of
commands. In this case, the new signals are transmitted when
the series of commands is executed.
• The interval may be too short. See “Changing the interval
between operation steps” (page 42) and set a longer interval,
or adjust the series of commands by changing the order of
buttons and labels. (When programming the system control
function, you can make an interval by pressing the TIMER
button.)
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
The component set to be • The component could not receive the signal from the
operated by the timer of Commander successfully. When using the timer, check the
the Commander does not following.
Remedy
function as expected.
- Check that the timer macro program functions correctly by
pressing the TEST key, after programming the timer (page
58).
- Check the location of the Commander.
• The status of each component is not suitable for operation.
(For example, you program the power-on setting, assuming
that power of the component is off when the timer turns on.
However, if power of the component is on when the
component receives the timer signal from the Commander,
the component will turn off.)
The timer program is
executed in the next
week or on the next day
though that program has
been already executed.
• The timer program contents you have set on this Commander
repeat weekly or daily. If you want to execute the timer
program once, set the timer standby mode to off after the
execution of the timer program (page 58).
“BATT” is displayed for • The batteries begin to be exhausted. Replace the batteries as
a second when you try to
use the Commander.
early as possible (page 7).
The clock is displayed as • The batteries might have been replaced. Replace the batteries
“--:--”.
with new ones (page 7). After replacing the batteries, the set
contents remain. So, to use the Commander with the previous
set contents, you should only set the clock (page 8).
“LOCK” is displayed on • The Hold function is on. Unlock the Hold function (page 62).
the LCD and the display
for operation does not
appear when you press a
button.
For the customers in the U.S.A.
Cu st o m e r Su p p o rt In fo rm a t io n
After you have read through this manual, if you still cannot get the Remote
Commander to work properly, call the Sony Customer Support Helpline at 1-800-
822-2217.
Download from Www.Somanuals.com. All Manuals Search And Downlo7ad3.
Ap p e n d ix
KEY DISPLAY
FUNCTION
PIP CH +
To change the TV
channel in the
“window” picture
upwards
Table of Preset
Functions
PIP CH –
To change the TV
channel in the
“window” picture
downwards
No t e
There may be some components or
functions that cannot be operated with
this Commander.
PIPINPUT
To change the input
mode of the “window”
picture
PIPSTILL
PIP OFF
To freeze the “window”
picture
TV
KEY DISPLAY
FUNCTION
To turn off the
“window” picture
POWER
To turn the power on/
off
MAIN/ SUB
NORMAL
To switch the sound of a
duplex broadcast
1 – 9, 0, ENT
To change the channel
For example, to change
to channel 5, press 0 and
5 (or, press 5 and ENT)
To return the picture
and sound quality to the
default setting
TV/ VIDEO
DISPLAY
SLEEP
To change the input
mode
AU MODE
PIC MODE
WIDE
To select the sound
adjusting mode
To display the current
channel on TV
To select the picture
adjusting mode
To operate the SLEEP
function on the TV
(works only for a TV
with SLEEP function)
To switch to WIDE
MENU
To call up the MENU
display
To move the cursor
upward
To move the cursor
downward
To move the cursor to
the right
To move the cursor to
the left
OK (Joystick)
To enter the selection of
the MENU display
GUIDE
PIP
To exit the setting menu
To turn on/ off the
“window” picture
CH +/ –
Channel up: +
Channel down: –
RECALL
To operate JUMP,
FLASHBACK or the
CHANNEL RETURN
function on the TV
depending on the setting
of the TV’s manufacturer
VOL +/ –
Volume up: +
Volume down: –
MUTING
To mute the volume on
the TV. Press again to
turn muting off.
PIP SWAP
PIP MOVE
To swap the “window”
picture
To move the location of
the “window” picture
74
Download from Www.Somanuals.com. All Manuals Search And Download.
SAT (Digital Satellite)
KEY DISPLAY
FUNCTION
KEY DISPLAY
FUNCTION
POWER
To turn the power on/
off
To move the cursor
upward
1 – 9, 0, ENT
TV/ VIDEO
To change the channel
For example, to change
to channel 5, press 0 and
5 (or, press 5 and
To move the cursor
downward
To move the cursor to
the right
ENTER)
To move the cursor to
the left
To switch the output of
the SAT receiver to the
TV (When connecting a
TV cable or antenna to
the receiver, the output
switches between a TV
and SAT program)
OK (Joystick)
To bring up the Station
Index when a program
guide is not displayed
To select the channel
that is highlighted
CH +/ –
DOT
Channel up: +
DISPLAY
GUIDE
To turn on the display
Channel down: –
To bring up the Master
Guide
Decimal point for
channel number
1
* m
To rewind
To play
1
EXIT
To exit the setting menu
* N
1
FAVORITE
To use the “FAVORITE”
function
* M
To fast-forward
1
* REC
To record, press N
while pressing REC.
First release N, then
release REC.
S.INDEX
REPLAY
INFO
To bring up the Station
Index
To replay the built-in
DVR
1
* x
To stop
1
To display program
information
* X
To pause
MENU
To call up the MENU
display
RECALL
To select the channel
previously selected
1
* The operation of the built-in DVR or
the video on demand
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo7ad5.
Ta b le o f Pre se t Fu n ct io n s
(co n t in u e d )
Digital cable box
KEY DISPLAY
FUNCTION
KEY DISPLAY
FUNCTION
POWER
To turn the power on/
off
OK (Joystick)
To bring up the Station
Index when a program
guide is not displayed
1 – 9, 0, ENT
To change the channel
(for example, to change
to channel 5, press 0 and
5, or press 5 and ENT)
To select the channel
that is highlighted
GUIDE
To exit the setting menu
Channel up: +
TV/ VIDEO
To switch the output of
the SAT receiver to the
TV (When connecting a
TV cable or antenna to
the receiver, the output
switches between a TV
and SAT program)
CH +/ –
Channel down: –
RECALL
OPTION
VIEWER
To turn on the display of
a shortcut menu
To display the function
tag
DISPLAY
To turn on the display
To display a drop menu
and toggle to change the
user
FAVORITE
To use the “FAVORITE”
function
2
BACK
FWD
EPG
To return to the just
previous display from
any display
* m
To rewind
To play
2
* N
2
* M
To fast-forward
To forward the display
returned by the BACK
key
2
* REC
To record, press N
while pressing REC.
First release N, then
release REC.
To call up the title bar
and toggle the title bar
on/ off in CABLE mode
2
* x
To stop
2
* X
To pause
PAGE +
PAGE –
INFO
Page up : +
MENU
To call up the MENU
display
Page down : –
To display program
information
To move the cursor
upward
HOME
To return to the home
display from any display
To move the cursor
downward
EXIT
To exit the setting menu
To move the cursor to
the right
2
* The operation of the built-in DVR or
the video on demand
To move the cursor to
the left
76
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
KEY DISPLAY
FUNCTION
KEY DISPLAY
FUNCTION
POWER
To turn the power on/
off
CH +
To proceed to the next
location or song
1 – 9, 0
Number buttons: To set
items selected from the
screen
CH –
To proceed to the
previous location or
song
PIP
To select numbers 10
and above
TITLE
To display the title menu
To switch the subtitle
To change the sound
SUB TITLE
AUDIO
CLEAR
ENT
To enter a setting or to
set items selected from
the screen
To clear the selected
characters from the
screen
DISPLAY
RECALL
MENU
To show the current play
status on the screen
SEARCHt
SEARCHT
FWD SLOW
REV SLOW
To search in the forward
direction
To return to the last
previous screen
To search in the reverse
direction
To display the DVD
menu
Slow playback in the
forward direction
To move the cursor
upward
Slow playback in the
reverse direction
To move the cursor
downward
EJECT
ANGLE
TIME
To open or close the tray
To switch angle
To move the cursor to
the right
To change the time
display
To move the cursor to
the left
PLAYMODE
To change the playback
mode
OK (Joystick)
To execute items
selected from the screen
m
N
M
x
To rewind
To play
To fast-forward
To stop
X
To pause
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo7ad7.
Ta b le o f Pre se t Fu n ct io n s
(co n t in u e d )
VCR1, VCR2
KEY DISPLAY
FUNCTION
KEY DISPLAY
FUNCTION
POWER
To turn the power on/
off
REC
To record, press N
3
while pressing REC.*
First release N, then
release REC.
1 – 9, 0, ENT
To change the channel
(for example, to change
to channel 5, press 0 and
5, or press 5 and ENT)
x
To stop
X
To pause
TV/ VIDEO
DISPLAY
MENU
To change the input
mode
EJECT
To eject a cassette
CHANNEL +/ – Channel up : +
Channel down : –
To activate the on-screen
display
ANT SW
To switch the antenna
output
To call up the MENU
display
SEARCHt
SEARCHT
CUE locked picture
search
To move the cursor
upward
REVIEW locked picture
search
To move the cursor
downward
PLAY × 2
C.RESET
To play at double speed
To reset the counter
To move the cursor to
the right
COUNTER
To change the counter
display
To move the cursor to
the left
COMMERCL
To skip over
commercials
OK (Joystick)
To enter the selection of
the MENU display
SP/ LP
To switch the tape speed
GUIDE
m
To exit the setting menu
To rewind
3
* In order to avoid recording by
mistake, the REC key does not work
by itself. You can assign this
N
To play
M
To fast-forward
operation (record) to a single key
using the learning function (page 23).
78
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Digital video
recorder)
KEY DISPLAY
FUNCTION
KEY DISPLAY
FUNCTION
POWER
To turn the power on/
off
OK (Joystick)
To bring up the Station
Index when a program
guide is not displayed
To select the channel
that is highlighted
1 – 9, 0, ENT
To change the channel
(for example, to change
to channel 5, press 0 and
5, or press 5 and ENT)
CH +/ –
Channel up: +
TV/ VIDEO
To switch the output of
the SAT receiver to the
TV
Channel down: –
4
* EPG
To access to all aspects
of the service
(When connecting a TV
cable or antenna to the
receiver, the output
switches between a TV
and SAT program.)
EXIT
To exit the setting menu
4
* Live TV
To bring up the Master
Guide
4
* LIST
To call up the title of the
recorded program
DISPLAY
GUIDE
To turn on the display
4
* REPLAY
To replay or to go into
REC/ REVIEW mode
during play (After about
5-second rewind, replay
begins.)
To bring up the Master
Guide
m
N
To rewind
To play
M
REC
To fast-forward
4
* THUMBS+
To select the desired
recorded program
(It is necessary to have
recorded the desired
program.)
To record, press N
while pressing REC.
First release N, then
release REC.
4
x
To stop
* THUMBS-
To select the desired
recorded program
(It is necessary to have
recorded the desired
program.)
X
To pause
MENU
To call up the MENU
display
To move the cursor
upward
CLEAR
To clear the setting
To move the cursor
downward
4
* This key corresponds to the Tivo
service or the replay service. Refer to
its instruction manual for details.
To move the cursor to
the right
To move the cursor to
the left
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo7ad9.
Ta b le o f Pre se t Fu n ct io n s
(co n t in u e d )
CD
CABLE (Cable box)
KEY DISPLAY
FUNCTION
KEY DISPLAY
FUNCTION
POWER
To turn the power on/
off
POWER
To turn the power on/
off
1 – 9, 0, ENT
To change the channel
(for example, to change
to channel 5, press 0 and
5, or press 5 and ENT)
1 – 9, 0
To select the track
number (0 selects track
10)
To select track numbers
above 10, see the
descriptions on the PIP
button below.
CH +/ –
Channel up :+
Channel down : –
RECALL
To operate JUMP,
FLASHBACK or
CHANNEL RETURN
function
PIP
To select numbers 10
and above
ENT
To enter the setting
To select next disc
RECALL
DISPLAY
To switch the display of
the CD player to on/ off
SLEEP
m
N
To clear the setting
To rewind
To play
M
x
To fast-forward
To stop
X
To pause
CH +
CH –
To select the next track
To select the previous
track
CONTINUE
To select continuous
play mode
SHUFFLE
PROGRAM
REPEAT
To play in random order
To use for program play
To select repeat play
mode
DISC
To decide the numeric
key operation
TRACK
GROUP
EDIT
To decide the numeric
key operation
To decide the numeric
key operation
To go into the setting
mode of automatic
program and time fade
EJECT
To open/ close
DSP MODE
To toggle the mode of
DSP added to the CD
DSP OFF
FADER
To turn the DSP off
To toggle the fade-in/
fade-out operation
80
Download from Www.Somanuals.com. All Manuals Search And Download.
AMP
KEY DISPLAY
FUNCTION
KEY DISPLAY
FUNCTION
POWER
To turn the power on/
off
CH +/ –
Presetting or tuning
frequency to a higher: +
1
To select the input
source: VIDEO 1
Presetting or tuning
frequency to a lower: –
2
To select the input
source: VIDEO 2
VOL +/ –
Volume up: +
Volume down: –
3
To select the input
source: AUX
MUTING
To mute the volume on
the AMP
4
To select the input
source: TUNER
Press again to turn
muting off
5
To select the input
source: CD
S.FIELD
GENRE
MODE
To turn on/ off the
sound field
6
To select the input
source: TAPE
To select a sound field
genre
7
To select the input
source: MD
To select a sound field
mode
8
To select the input
source: TV
T.TONE
To output a test tone
CENTER+
To adjust the center
speaker level: +
9
To select the input
source: PHONO
CENTER–
REAR+
To adjust the center
speaker level: –
0
To select the input
source: DVD
To adjust the rear
speaker level: +
DISPLAY
To change the multi-
channel of 5.1ch and
above
REAR–
To adjust the rear
speaker level: –
MENU
To call up the MENU
display, or return to the
previous MENU
SUB+
To adjust the subwoofer
level: +
SUB–
To adjust the subwoofer
level: –
RECALL
To shift band or preset
select
D.INPUTt
D.INPUTT
To switch the digital
input: t
SLEEP
To select FM/ AM
GUIDE
To return to the basic
MENU
To switch the digital
input: T
Continued
Download from Www.Somanuals.com. All Manuals Search And Downlo8ad1.
Ta b le o f Pre se t Fu n ct io n s
(co n t in u e d )
MD
DAT
KEY DISPLAY
FUNCTION
KEY DISPLAY
FUNCTION
POWER
To turn the power on/
off
POWER
To turn the power on/
off
1 – 9, 0
To select the track
number (0 selects track
10)
1 – 9, 0
To select the track
number (0 selects track
10)
To select track numbers
above 10, see the
descriptions on the PIP
button below.
DISPLAY
To change the display
mode or turn the display
on/ off
m
N
To rewind
To play
PIP
To select numbers 10
and above
M
REC
To fast-forward
ENT
To enter the setting
To record, press N
while pressing REC.
First release N, then
release REC.
RECALL
DISPLAY
To select the next disc
To change the display
mode or turn the display
on/ off
x
To stop
SLEEP
m
To clear the setting
To rewind
X
To pause
EJECT
CH +
CH –
To open/ close
To select the next track
N
To play
M
To fast-forward
To select the previous
track
REC
To record, press N
while pressing REC.
First release N, then
release REC.
HIGH REV
HIGH CUE
FADER
High speed review
High speed cue
To select the fade-in/
fade out
x
To stop
X
To pause
REC MUTE
Record muting
CH +
CH –
To select the next track
To select the previous
track
CONTINUE
To select continuous
play mode
SHUFFLE
PROGRAM
REPEAT
To play in random order
To use for program play
To switch the repeat
play of a single or all
track(s) to on/ off
DECK A
To select a deck of the
dual MD deck: A
DECK B
To select a deck of the
dual MD deck: B
REC MODE
CD SYNC
To toggle the recording
mode
To start synchronizing
with the CD
EJECT
To open/ close
FADER
To select the fade-in/
fade-out
SCROLL
To scroll disc names or
track names
82
Download from Www.Somanuals.com. All Manuals Search And Download.
TAPE A, TAPE B
KEY DISPLAY
FUNCTION
POWER
To turn the power on/
off
m
N
To rewind
To play
M
REC
To fast-forward
To record, press N
while pressing REC.
First release N, then
release REC.
x
To stop
X
To pause
To reverse
TV/ VIDEO
DISPLAY
To change the display
mode
RECALL
CH +
To select a tape deck:
Deck A or B (dual
cassette deck only)
To search the beginning
of a track in the fast
forward direction
CH –
To search the beginning
of a track in the rewind
direction
DOLBY NR
REC LEV+
REC LEV–
To toggle the Dolby
Noise Reduction
To make the recording
level higher
To make the recording
level lower
REC MUTE
CD SYNC
Record muting
To start synchronizing
with the CD
FADER
To stop after fading out
and fade in after starting
C.RESET
To reset the tape counter
Download from Www.Somanuals.com. All Manuals Search And Downlo8ad3.
F, G
Factory setting 13, 30, 34, 42, 43, 63,
64
Index
H
A
Hold Function 62
Automatic-Off
of the backlight 62
K
B
Key touch beep 64
Backlight
L
Automatic-Off 62
LCD 6
Batteries 7
backlight 63
Learning Function 23
Locking
C, D
Changing
Hold function 62
name of the label 27, 37, 50, 56, 67
changing interval 42
CH (channel) +/ – button 6
Channel Macro function 48
Clearing/ Changing
M, N, O
MUTING button 6, 23, 26
P, Q
contents programmed for a
component label 19
Channel Macro function 50
learned signal 29
Power-On function
setting 44
Preset components 13
Power-On command 45
System Control function 37, 39
component macro 41
timer setting 60
S
System Control function 34
programming a series of
commands 34
Clock setting 8
interval of the System Control
function 42
DS time 9, 12
STD time 9, 12
System Power-Off function
SONY OFF label 34
Code number 13
Component Select label
assigning other components 46
copying settings 46
T, U
programming a series of
commands 40
Timer setting 51
Troubleshooting 71
setting Power-On function 44
Copying
V, W, X, Y, Z
settings of a component label 46
VOL (volume) +/ – buttons 6, 26
Volume Control 23, 30
E
Erasing
all the settings 68
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|