4-238-304-51(1)
FM Stereo
FM-AM Receiver
GB
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear panel. Record the serial number
in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. STR-DE185
Serial No.
STR-DE185
© 2003 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
List of Button Locations and
Reference Pages
Other Operations
Naming preset stations and program
sources ........................................... 18
Main unit ............................................... 5
Recording ............................................ 18
Using the Sleep Timer ......................... 19
Hooking Up the Components
Required cords....................................... 6
Antenna hookups ................................... 7
Audio/Video component hookups ......... 8
Speaker system hookups ....................... 9
Other hookups ..................................... 11
Clearing the receiver’s memory .......... 11
Additional Information
Precautions .......................................... 20
Troubleshooting................................... 20
Specifications ...................................... 22
Remote button description................... 24
Changing the factory setting of
GB
a function button ........................... 27
Basic Operations
* Models of area code CEL, CEK only.
Selecting the component ..................... 12
Adjusting the sound ............................. 12
Changing the display ........................... 12
Receiving Broadcasts
Storing FM stations automatically
(AUTOBETICAL)* ...................... 13
Direct tuning ........................................ 13
Automatic tuning ................................. 14
Preset tuning ........................................ 14
Using the Radio Data System
(RDS)* .......................................... 16
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
Note for the supplied remote
The instructions in this manual are for model
STR-DE185. Check your model number by looking at
the lower right corner of the front panel. In this
manual, the illustration for area code CEL is used for
illustration purposes unless stated otherwise.
The DVD button on the remote is not available.
Inserting batteries into the
remote
Insert R6 (size-AA) batteries with the + and –
properly oriented in the battery compartment.
When using the remote, point it at the remote
sensor g on the receiver.
About area codes
The area code of the receiver you purchased is
shown on the lower portion of the rear panel (see
the illustration below).
T
]
}
}
]
4-XXX-XXX-XX AA
Area code
Any differences in operation, according to the
area code, are clearly indicated in the text, for
example, “Models of area code AA only”.
Tip
Tip
Under normal conditions, the batteries should last for
about 6 months. When the remote no longer operates
the receiver, replace all batteries with new ones.
The instructions in this manual describe the controls
on the receiver. You can also use the controls on the
supplied remote if they have the same or similar
names as those on the receiver. For details on the use
of your remote, see pages 24–27.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you don’t use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Button Locations and Reference Pages
Illustration number
How to use this page
r
Use this page to find the location of buttons that are
mentioned in the text.
NAME 5 (18)
R
R
Name of button/part Reference page
Main unit
MASTER VOLUME qj (12, 20)
MD/TAPE qf (8, 12)
MEMORY/ENTER wf (13, 15,
18)
MUTING qk (12, 20)
NAME 5 (18)
Numeric buttons 3 (13)
SHIFT wh (15)
SLEEP (models of area code U)
4 (19)
SPEAKERS A wj (10, 12)
SPEAKERS B wk (10, 12)
ALPHABETICAL ORDER
A – H
AM 8 (13, 14)
BALANCE L/R q; (12)
BASS +/– wa (12)
BASS BOOST ql (12)
CD qg (8, 12)
T – Z
TREBLE +/– w; (12)
TUNER qh (8, 12-15, 18)
TUNING/CHAR +/– ws (14, 18)
VIDEO 1 qs (12)
P – S
PHONES wl (12, 21)
DIRECT wg (13)
DISPLAY qa (12, 16)
Display 9 (11-16, 18, 19)
FM 6 (13, 14)
PRESET/PTY SELECT +/–
(models of area code CEL,
CEK) 7 (15, 16)
PRESET TUNING +/– (models of
area code U) 7 (15, 23)
PTY (models of area code CEL,
CEK) 4 (16)
VIDEO 2 qd (8, 12)
FM MODE wd (14)
BUTTON DESCRIPTIONS
I – O
IR (receptor) 2 (4, 22)
?/1 (power) 1 (11, 13, 23)
1
2 3
456
7
8
9q;
qa
qs qdqfqgqh
g
wl wkwj
wh
wg wf wd ws
wa w;ql
qk qj
5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the Components
Required cords
A Audio cord (not supplied)
White (L)
Red (R)
White (L)
Red (R)
B Speaker cords (not supplied)
(+)
(–)
(+)
(–)
Before you get started
•
•
•
•
Turn off the power to all components before making any connections.
Do not connect the AC power cord until all of the connections are completed.
Be sure to make connections firmly to avoid hum and noise.
When connecting an audio cord, be sure to match the color-coded pins to the appropriate jacks on the
components: white (left, audio) to white; and red (right, audio) to red.
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna hookups
AM loop antenna
(supplied)
FM wire antenna*
(supplied)
ANTENNA
AM
y
FM
75Ω
COAXIAL
+
+
CD
MD/TAPE
VIDEO 1
OUT
L
L
B
R
R
IM
* The shape of the connector varies depending on the area code.
Notes on antenna hookups
•
To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
•
If you have poor AM reception, connect a
6 to 15 meters (20 to 50 feet) insulated wire
(not supplied) to the AM antenna terminal in
addition to the AM loop antenna. Try to extend
the wire outdoors and keep it horizontal.
•
•
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it
as horizontal as possible.
7GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio/Video component hookups
Video Component Hookups
VCR
VCR
OUTPUT
LINE
L
R
R
A
A
A
AM
y
FM
SPEAKERS
COAXIAL
CD
MD/TAPE
AUDIO IN
IN
OUT
IN
A
B
L
L
B
R
R
IMPEDANCE USE 8-16Ω
OUT
A
A
A
OUTPUT
LINE
INPUT OUTPUT
LINE LINE
L
L
R
R
CD player
MD or Tape deck
Audio Component Hookups
Note on video component
hookups
Use the function buttons (VIDEO 2,
MD/TAPE, CD, TUNER) to select the
VIDEO 1 AUDIO OUT signal. You can record
this audio signal by connecting a recording
component such as a cassette deck (to the
VIDEO 1 AUDIO OUT jack).
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker system hookups
B
B
ANTENNA
AM
y
FM
75
COAXIAL
CD
MD/TAPE
VIDEO 1
AUDIO IN
IN
OUT
IN
A
B
A
B
L
L
R
R
IMPEDANCE USE 8-16Ω
B
B
Speaker B*
(L)
* If you have an additional front speaker system, connect them to the SPEAKERS B terminals.
Tips
• Twist the stripped ends of the cords about 15 mm
(2/3 inch). Be sure to match the speaker cord to the
appropriate terminal on the components: + to + and
– to –. If the cords are reversed, the sound will be
distorted and will lack bass.
• To avoid damaging your speakers, make sure that
you turn down the volume before you turn off the
receiver. When you turn on the receiver, the volume
remains at the level you turn off the receiver.
9GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To avoid short-circuiting the
speakers
Selecting the speaker system
To drive the speakers, select the speaker system
as follows. The SPEAKERS indicator(s)
light(s) up.
Short-circuiting of the speakers may damage
the receiver. To prevent this, make sure to take
the following precautions when connecting the
speakers.
To drive
Press SPEAKERS button
Speaker System A
(connected to the
SPEAKERS A
terminals)
A
Make sure the stripped ends of each
speaker cord does not touch another
speaker terminal, the stripped end of
another speaker cord or the metal parts
of the receiver.
Speaker System B
(connected to the
SPEAKERS B
terminals)
B
Examples of poor conditions of the
speaker cord
Both speaker
systems A and B
(parallel connection)
A and B
Tips
• Press SPEAKERS A or B button again to deselect
the speakers.
• The default speaker system is Speaker System A.
Stripped speaker cord is touching another
speaker terminal.
Stripped cords are touching each other
due to excessive removal of insulation.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
Other hookups
Make sure that the total power consumption of the
component connected to the receiver’s AC OUTLET
does not exceed the wattage stated on the rear panel.
Do not connect high-wattage electrical home
appliances such as electric irons, fans, or TVs to this
outlet.
AC OUTLET*
AC OUTLET
Note
If the AC power cord is disconnected for about one
week, the receiver’s entire memory will be cleared.
Clearing the receiver’s
memory
Before using your receiver for the first time, or
when you want to clear the receiver’s memory,
do the following.
1 Turn off the receiver.
AC power cord
2 Hold down ?/1 for 5 seconds.
“INITIAL” appears in the display and all of
the following items are reset or cleared:
To a wall outlet
* The configuration and shape of AC outlets vary
according to the model and country to which the
receiver is shipped.
• All preset stations are reset or cleared.
• All index names (of preset stations and
program sources) are cleared.
• The master volume is set to VOL MIN.
Connecting the AC power
cord
• All adjustments made (BALANCE,
speaker system, etc.) are reset to factory
settings.
Connect the AC power cord(s) of your audio/
video components to a wall outlet.
If you connect other audio/video components to
the AC OUTLET on the receiver, the receiver
will supply power to the connected component,
allowing you to turn the whole system on or off
when you turn the receiver on or off.
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
To
Do this
Press MUTING. Press again
to restore the sound. The
muting function is canceled
when you turn the power on
or turn the MASTER
Mute the sound
Selecting the component
Press a function button to select the component
you want to use.
VOLUME clockwise to turn
the volume up.
To select
Press
VCR
VIDEO 1 or VIDEO 2
MD/TAPE
CD
Connect the headphones to
the PHONES jack and set the
SPEAKERS A and B buttons
to OFF.
Listen with
headphones
MD or Tape deck
CD player
Built in tuner
TUNER
After turning on the component you selected,
select the component and play the program
source.
Changing the display
•
After selecting VCR, turn on the TV and set the
TV’s video input to match the component you
selected.
DISPLAY
Each time you press DISPLAY, the display
changes cyclically as follows:
Index name of the component* t Selected
component
Adjusting the sound
The default settings are underlined.
When the tuner is selected
Index name of the preset station* or program
station name** t Frequency t Program type
indication** t Radio text** t Current
time**
To
Do this
Adjust the volume
VOL MIN
Turn MASTER VOLUME.
Every time you turn the
MASTER VOLUME, the
display changes as follows:
VOL MIN y VOL 1 y
… yVOL MAX
*
Index name appears only when you have assigned
one to the component or preset station (page 18).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
function.
Adjust the balance
BALANCE
Press BALANCE L/R. Every
time you press BALANCE
L/R, the display changes as
follows:
** During RDS reception only. (Models of area code
CEL, CEK only. See page 16).
BAL L+8… y BAL L+1
y BALANCE y BAL
R+1… y BAL R+8
Adjust the tone
quality
BASS 0 dB
TREB 0 dB
Press BASS +/– and
TREBLE +/–. You can select
a tone level of –10 dB to
+10 dB in 2 dB steps.
Reinforce the bass
Off
Press BASS BOOST. The
BASS BOOST indicator
lights up.
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Broadcasts
Notes
Before receiving broadcasts, make sure you
have connected FM and AM antennas to the
receiver (page 7).
• Do not press any button on the receiver or supplied
remote during autobetical operation.
• If you move to another area, repeat this procedure
to store stations in your new area.
• For details on tuning the stored stations, see page
15.
Storing FM stations
automatically
• If you move the antenna after storing stations with
this procedure, the stored settings may no longer be
valid. If this happens, repeat this procedure to store
the stations again.
(AUTOBETICAL)
Direct tuning
(Models of area code CEL, CEK only)
This function lets you store up to 30 FM and
FM RDS stations in alphabetical order without
redundancy. Additionally, it only stores the
stations with the clearest signals.
You can enter a frequency of the station you
want directly by using the numeric buttons on
the receiver or the supplied remote.
1 Press TUNER.
If you want to store FM or AM stations one by
one, see “Presetting radio stations” on page 15.
The last received station is tuned in.
2 Press FM or AM to select the FM or AM
1 Press ?/1 to turn off the receiver.
band.
2 Hold down MEMORY/ENTER and press
3 Press DIRECT.
?/1 to turn the receiver back on.
“AUTO-BETICAL SELECT” appears in
the display and the receiver scans and stores
all the FM and FM RDS stations in the
broadcast area.
4 Press the numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
1
0
2
5
0
b
b
b
b
For RDS stations, the tuner first checks for
stations broadcasting the same program,
then stores only the one with the clearest
signal. The selected RDS stations are sorted
alphabetically by their Program Service
name, then assigned a 2-character preset
code. For more details on RDS, see page 16.
Example 2: AM 1350 kHz
(You don’t have to enter the last “0” when the
tuning scale is set to 10 kHz.)
1
3
5
0
b
b
b
If you cannot tune in a station and the
entered numbers flash
Make sure you’ve entered the right
frequency. If not, repeat steps 3 and 4.
If the entered numbers still flash, the
frequency is not used in your area.
Regular FM stations are assigned
2-character preset codes and stored after the
RDS station.
When done, “FINISH” appears in the
display momentarily and the receiver
returns to the normal operation.
continued
13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Tuning (continued)
Automatic tuning
5 If you’ve tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
If you don’t know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.
6 Repeat steps 2 to 5 to receive another
1 Press TUNER.
station.
The last received station is tuned in.
Tips
2 Press FM or AM to select the FM or AM
• If you do not remember the precise frequency, press
TUNING/CHAR + or TUNING/CHAR – after
entering the value close to the frequency you want.
The receiver automatically tunes in the station you
want. If the frequency seems to be higher than the
entered value, press TUNING/CHAR +, and if the
frequency seems to be lower than the entered value,
press TUNING/CHAR –.
• If “STEREO” flashes in the display and the FM
stereo reception is poor, press FM MODE to change
to monaural (MONO). You will not be able to enjoy
the stereo effect, but the sound will be less
distorted. To return to stereo mode, press FM
MODE again.
band.
3 Press TUNING/CHAR + or
TUNING/CHAR –.
Press TUNING/CHAR + to scan from low
to high; press TUNING/CHAR – to scan
from high to low.
The receiver stops scanning whenever a
station is received.
When the receiver reaches either end of
the band
Scanning is repeated in the same direction.
The tuning scale differs depending on the area code
as shown in the following table. For details on area
codes, see page 4.
4 To continue scanning, press
TUNING/CHAR + or TUNING/CHAR –
again.
Area code
U
FM
100 kHz 10 kHz*
50 kHz 9 kHz
AM
Preset tuning
CEL, CEK
After you have tuned in stations using Direct
Tuning or Automatic Tuning, you can preset
them to the receiver. Then you can tune in any
of the stations directly by entering its
* The AM tuning scale can be changed (page 23).
2-character preset code on the receiver or the
supplied remote. Up to 30 FM or AM stations
can be preset. The receiver will also scan all the
stations that you have preset.
Before tuning to preset stations, be sure to
preset them by performing steps on “Presetting
radio stations” (page 15).
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting radio stations
Tuning to preset stations
You can tune the preset stations by either of the
following two ways.
1 Press TUNER.
The last received station is tuned in.
Scanning the preset stations
2 Tune in the station that you want to
preset using Direct Tuning (page 13) or
Automatic Tuning (page 14).
1 Press TUNER.
The last received station is tuned in.
3 Press MEMORY/ENTER.
“MEMORY” appears in the display for a
few seconds.
2 Press PRESET TUNING +* or PRESET
TUNING –* repeatedly to select the
preset station you want.
Do steps 4 to 6 before “MEMORY” goes
out.
Each time you press the button, the receiver
tunes in one preset station at a time, in the
corresponding order and direction as
follows:
4 Press SHIFT to select a memory page
(A, B or C).
Each time you press SHIFT, the letter “A”,
“B”, or “C” appears in the display.
nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N
nC0˜...C2˜C1N
5 Press the numeric buttons to select a
preset number.
* For models of area code CEL, CEK: PRESET/PTY
SELECT + or PRESET/PTY SELECT – .
If “MEMORY” goes out before you press
the preset number, start again from step 3.
Using the preset codes
6 Repeat steps 2 to 5 to preset another
station.
You can tune directly to a preset station by
entering its preset number on the receiver or the
supplied remote.
To change a preset number to
another station
Do steps 1 to 5 to preset a new station to the
number.
1 Press TUNER.
The last received station is tuned in.
Note
2 Press SHIFT to select a memory page
(A, B, or C), then press the preset
number of the station you want using
the numeric buttons.
If the AC power cord is disconnected for about one
week, the preset stations will be cleared from the
receiver’s memory, and you will have to preset the
stations again.
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Using the Radio Data
System (RDS)
• If there is an emergency announcement by
government authorities, “ALARM” flashes in the
display.
• When the message consists of 9 characters or more,
the message scrolls across the display.
• If a station does not provide a particular RDS
service, “NO XXX” (such as “NO PTY”) appears in
the display.
(Models of area code CEL, CEK only)
This receiver also allows you to use RDS
(Radio Data System), which enables radio
stations to send additional information along
with the regular program signal. You can use
the following convenient RDS features:
Scanning preset stations by
program type
– Displaying RDS information
You can tune in preset stations according to a
program type that you specify. The receiver
scans for stations in its preset memory
currently broadcasting the specified program
type.
– Scanning preset stations by program type
Note that RDS is operable only for FM
stations.*
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.
1 Press PTY.
2 Press PRESET/PTY SELECT + or
PRESET/PTY SELECT – to select the
program type.
Receiving RDS broadcasts
See the table below for the information on
each program type.
Simply select a station on the FM band
using direct tuning (page 13), automatic
tuning (page 14), or preset tuning (page
14).
When you tune in a station that provides RDS
services, the program station name normally
appears in the display.
3 Press PTY.
When the receiver is scanning stations,
“SEARCH” and the program type are
displayed alternately.
When the receiver finds a station, the
receiver stops scanning. When the receiver
could not find any preset stations currently
broadcasting the specified program type,
“NO PTY” appears in the display.
Note
RDS may not work properly if the station you tuned
to is not transmitting the RDS signal properly or if the
signal strength is weak.
Displaying RDS information
While receiving an RDS station, press
DISPLAY.
Each time you press the button, RDS
information on the display changes cyclically
as follows:
Program Station name t Frequency t
Program Type indicationa) t
Radio Text indicationb) t Current Time
indication (in 24-hour system)
a) Type of program being broadcast (page 17).
b) Text messages sent by the RDS station.
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of program types
Program type
indication
Description
Program type
indication
Description
Programs on recreational activities
such as gardening, fishing,
cooking, etc.
LEISURE
NEWS
News programs
AFFAIRS
Topical programs that expand on
current news
Jazz programs
JAZZ
COUNTRY
NATION M
Country music programs
INFO
Programs offering information on a
wide spectrum of subjects,
including consumer affairs and
medical advice
Programs featuring the popular
music of the country or region
OLDIES
Programs featuring oldies music
Folk music programs
FOLK M
DOCUMENT
NONE
SPORT
Sports programs
Investigative features
EDUCATE
Educational programs, such as
“how-to” and advice programs
Any programs not defined above
DRAMA
Radio plays and serials
CULTURE
Programs about national or
regional culture, such as language
and social concerns
SCIENCE
VARIED
Programs about the natural
sciences and technology
Other types of programs such as
celebrity interviews, panel games,
and comedy
POP M
Popular music programs
Rock music programs
Easy Listening
ROCK M
EASY M
LIGHT M
Instrumental, vocal, and choral
music
CLASSICS
OTHER M
Performances of major orchestras,
chamber music, opera, etc.
Music that does not fit into any
categories above, such as Rhythm
& Blues and Reggae
WEATHER
FINANCE
Weather information
Stock market reports and trading,
etc.
CHILDREN
SOCIAL
Programs for children
Programs about people and the
things that affect them
RELIGION
PHONE IN
Programs of religious content
Programs where members of the
public express their views by
phone or in a public forum
TRAVEL
Programs about travel. Not for
announcements that are located by
TP/TA.
17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Operations
4 Press MEMORY/ENTER.
5 Repeat steps 2 to 4 to assign index
name for another station or program
source.
Naming preset stations
and program sources
Note
You can enter a name (index name) of up to 8
characters for preset stations and program
sources. These names (for example, “VHS”)
appear in the receiver’s display when a station
or program source is selected. Note that no
more than one name can be entered for each
preset station or program source.
This function is useful for distinguishing
components of the same kind. For example,
two VCRs can be specified as “VHS” and
“8MM”, respectively. It is also handy for
identifying components connected to jacks
meant for another type of component, for
example, a second CD player connected to the
MD/TAPE jacks.
(Models of area code CEL, CEK only)
You cannot change the name of an RDS station.
Recording
Before you begin, make sure you’ve connected
all components properly.
Recording on an audio tape
or MiniDisc
You can record on a cassette tape or MiniDisc
using the receiver. See the operating
instructions of your cassette deck or MD deck
if you need help.
1 To name a preset station
1 Select the component to be recorded.
2 Prepare the component for playing.
For example, insert a CD into the CD
player.
Press TUNER, then tune in the preset
station you want to create an index
name for.
The last station you received is tuned in.
If you are not familiar with how to tune in
preset stations, see “Tuning to preset
stations” on page 15.
3 Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
To name a program source
4 Start recording on the recording deck,
then start playback on the playback
component.
Select the program source (component)
to be named.
2 Press NAME.
3 Create an index name by using the
TUNING/CHAR and NAME:
Press TUNING/CHAR + or TUNING/
CHAR – to select a character, then press
NAME to move the cursor to the next
position.
To insert a space
Press TUNING/CHAR + or TUNING/
CHAR – until a blank space appears in the
display.
If you’ve made a mistake
Press NAME repeatedly until the character
to be changed flashes, then press TUNING/
CHAR + or TUNING/CHAR – to select the
right character.
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on a video tape
Using the Sleep Timer
You can record from a VCR, a TV, or an LD
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR or LD player if you
need help.
You can set the receiver to turn off
automatically at a specified time.
Press SLEEP on the front panel (except
for models of area code CEL, CEK) or on
the remote while the power is on.
1 Select the program source to be
Each time you press the button, the display
changes cyclically as follows:
recorded.
2 – 00 – 00 t 1 – 30 – 00 t 1 – 00 – 00 t
0 – 30 – 00 t OFF
2 Prepare the component for playing.
For example, insert the laser disc you want
to record into the LD player.
The display dims after you have specified the
time.
3 Insert a blank video tape into the VCR
(VIDEO 1) for recording.
Tip
To check the remaining time before the receiver turns
off, press SLEEP. The remaining time appears in the
display.
4 Start recording on the recording VCR,
then start playing the video tape or
laser disc you want to record.
Tip
You can record the sound from any audio source onto
a video tape while copying from a video tape or laser
disc. Locate the point where you want to start
recording from another audio source, select the
program source, then start playback. The audio from
that source will be recorded onto the audio track of
the video tape instead of the audio from the original
medium. To resume audio recording from the original
medium, select the video source again.
19GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
On cleaning
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
Precautions
On safety
Should any solid object or liquid fall into the cabinet,
unplug the receiver and have it checked by qualified
personnel before operating it any further.
If you have any question or problem concerning your
receiver, please consult your nearest Sony dealer.
On power sources
• Before operating the unit, check that the operating
voltage is identical with your local power supply.
The operating voltage is indicated on the nameplate
at the rear of the receiver.
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the receiver itself has been turned off.
• If you are not going to use the receiver for a long
time, be sure to disconnect the receiver from the
wall outlet. To disconnect the AC power cord,
grasp the plug itself; never pull the cord.
• (Models of area code U only)
One blade of the plug is wider than the other for the
purpose of safety and will fit into the wall outlet
only one way. If you are unable to insert the plug
fully into the outlet, contact your dealer.
• AC power cord must be changed only at the
qualified service shop.
Troubleshooting
If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem. Should any problem persist, consult
your nearest Sony dealer.
There is no sound or only a very low-level sound
no matter which component is selected.
• Check that the speakers and components are
connected securely and correctly.
• Check that both the receiver and all the
components are turned on.
• Check that the MASTER VOLUME control is
not set at VOL MIN.
On heat buildup
• Press MUTING to cancel the muting function.
• Check that the headphones are not connected.
Although the unit heats up during operation, this is
not a malfunction. If you continuously use this unit at
a large volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid burning
yourself, do not touch the cabinet.
• The protective device on the receiver has been
activated because of a short circuit (“PROTECT”
flashes). Turn off the receiver, eliminate the
short-circuit problem and turn on the power
again.
On placement
• Place the receiver in a location with adequate
ventilation to prevent heat buildup and prolong the
life of the receiver.
• Do not place the receiver near heat sources, or in a
place subject to direct sunlight, excessive dust or
mechanical shock.
• Do not place anything on top of the cabinet that
might block the ventilation holes and cause
malfunctions.
There is no sound from a specific component.
• Check that the component is connected correctly
to the audio input jacks for that component.
• Check that the cord(s) used for the connection is
(are) fully inserted into the jacks on both the
receiver and the component.
• Check that you have selected the correct
component on the receiver.
On operation
Before connecting other components, be sure to turn
off and unplug the receiver.
20GB
Download from Www.Somanuals.com. All Manuals Search And Download.
There is no sound from one of the front
speakers.
Radio stations cannot be tuned in.
• Check that the antennas are connected securely.
Adjust the antennas and connect an external
antenna if necessary.
Connect a pair of headphones to the PHONES jack
to verify that sound is output from the headphones
(page 12).
• The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use
direct tuning.
If only one channel is output from the headphones,
the component may not be connected to the
receiver correctly. Check that all the cords are fully
inserted into the jacks on both the receiver and the
component.
• Make sure you set the tuning interval correctly
(when tuning in AM stations with direct tuning).
• No stations have been preset or the preset
stations have been cleared (when tuning by
scanning preset stations). Preset the stations
(page 15).
If both channels are output from the headphones,
the front speaker may not be connected to the
receiver correctly. Check the connection of the
front speaker which is not outputting any sound.
RDS does not work.*
The left and right sounds are unbalanced or
reversed.
• Make sure that you’re tuned to an FM RDS
station.
• Check that the speakers and components are
connected correctly and securely.
• Select a stronger FM station.
The RDS information that you want does not
appear.*
• Adjust the balance (page 12).
There is severe hum or noise.
Contact the radio station and find out whether they
actually provide the service in question. If so, the
service may be temporarily out of order.
• Check that the speakers and components are
connected securely.
• Check that the connecting cords are away from a
transformer or motor, and at least 3 meters away
from a TV set or fluorescent light.
* Models of area code CEL, CEK only.
• Move your TV away from the audio components.
continued
• The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
Recording cannot be done.
Check that the components are connected
correctly.
The FM reception is poor.
Use a 75-ohm coaxial cable (not supplied) to
connect the receiver to an outdoor FM antenna as
shown below. If you connect the receiver to an
outdoor antenna, ground it against lightning. To
prevent a gas explosion, do not connect the ground
wire to a gas pipe.
Receiver
Outdoor FM antenna
ANTENNA
AM
y
Ground wire
(not supplied)
FM
75Ω
COAXIAL
To ground
21GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (continued)
Specifications
The remote does not function.
AUDIO POWER SPECIFICATIONS
• Point the remote at the remote sensor
receiver.
on the
g
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
• Remove any obstacles in the path between the
remote and the receiver.
With 8 ohm loads, both channels driven, from
40 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated output (Models of area code
U only).
• Replace both batteries in the remote with new
ones, if they are weak.
• Make sure you select the correct function on the
remote.
• If the remote is set to operate the TV only, use
the remote to select a source or component other
than TV before operating the receiver or other
component.
Amplifier section
POWER OUTPUT
Models of area code U
Rated Power Output at Stereo Mode
(8 ohms 40 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
Clearing the receiver’s memory
To clear
See
All memorized settings
page 11
Models of area code CEL, CEK
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W1)
1) Measured under the following conditions:
Area code
Power requirements
CEL, CEK
230 V AC, 50 Hz
Frequency response
CD, MD/TAPE,
20 Hz – 50 kHz
VIDEO 1, VIDEO 2
+0/–0.5 dB (with bass
boost bypassed)
Inputs (Analog)
CD, MD/TAPE,
VIDEO 1, VIDEO 2
Sensitivity: 250 mV
Impedance: 50 kilohms
S/N2): 85 dB
(A, 250 mV3))
2) INPUT SHORT.
3) Weighted network, input level.
Outputs
MD/TAPE, VIDEO 1
Voltage: 250 mV
Impedance: 10 kilohms
Bass Boost:
Tone:
+8 dB at 70 Hz
10 dB at 100 Hz and
10 kHz
22GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down PRESET TUNING + and
press ?/1. All preset stations will be erased when
you change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
General
Power requirements
Sensitivity
Mono:
Stereo:
18.3 dBf, 2.2 µV/75 ohms
38.3 dBf, 22.5 µV/75 ohms
Area code
U
Power requirements
120 V AC, 60 Hz
Usable sensitivity
11.2 dBf, 1 µV/75 ohms
CEL, CEK
230 V AC, 50/60 Hz
S/N
Mono:
Stereo:
76 dB
70 dB
Power consumption
Area code
U
Power consumption
Harmonic distortion at 1 kHz
190 W
210 W
Mono:
Stereo:
0.5%
0.8%
CEL, CEK
Separation
35 dB at 1 kHz
Power consumption (during standby mode)
0.5 W (for models of all area code)
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
AC outlets
Area code
U
AC outlets
Selectivity
60 dB at 400 kHz
1 switched, 120 W/1A MAX
1 switched, 100 W MAX
AM tuner section
CEL, CEK
Tuning range
Models of area code U
With 10-kHz tuning scale: 530 – 1710 kHz4)
With 9-kHz tuning scale: 531 – 1710 kHz4)
Dimensions
430 × 145 × 300 mm
7
6
6
8
8
8
(16 / × 5 / × 11 / in.)
including projecting parts
and controls
Models of area code CEL, CEK
With 9-kHz tuning scale: 531 – 1602 kHz
Mass (Approx.)
7.0 kg (15 lb 7 oz)
Antenna
Loop antenna
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-U185 (1)
R6 (size-AA) batteries (2)
Intermediate frequency
450 kHz
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kHz)
For details on the area code of the component you
are using, see page 4.
S/N
45 dB (at 50 mV/m)
Harmonic distortion 1.0 % (50 mV/m,
Design and specifications are subject to change
without notice.
400 Hz)
Selectivity
At 9 kHz:
35 dB
40 dB
At 10 kHz:
23GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote button description
You can use the remote RM-U185 to operate
the components in your system.
The tables below show the settings of each
button.
Remote
Button
Operations
Function
AV
?/1
?/1
SLEEP
SLEEP
Receiver
Activates the sleep
SYSTEM
function and the duration
which the receiver turns
off automatically.
STANDBY
•
VIDEO 1
MD/TAPE
VIDEO 2
CD
DVD
?/1
Receiver
Turns the receiver on or
off.
TUNER
TOP MENU
DVD MENU
F
VIDEO 1 Receiver
VIDEO 2 Receiver
To watch VCR.
(VTR mode 3)
1
2
3
g
G
ENTER
To watch VCR.
(VTR mode 1)
4
5
8
0
6
9
f
7
SHIFT
DVD
Receiver
To watch DVD.
D. TUNING
ENTER
MD/TAPE Receiver
To listen to Minidisc or
audio tape.
>10
– /– –
RETURN
–
=
CH/PRESET +
+
TV/VIDEO
CD
Receiver
Receiver
To listen to compact disc.
ANT
TUNER
To listen to radio
programs.
TV/VTR
D.SKIP
0
(
)
P
SHIFT
Receiver
Press repeatedly to select
a memory page for
presetting radio stations
or tuning to preset
stations.
p
L
BALANCE
R
BASS BOOST
MUTING
D.TUNING Receiver
Tuner station direct
key-in-mode.
+
–
–
TREBLE
BASS
MASTER
VOL
+
BALANCE Receiver
L/R
Adjust the balance.
BASS
BOOST
Receiver
Reinforce the bass.
+
TV VOL
–
+
TV CH
–
TREBLE Receiver
+/–
Adjust the treble tone
quality.
MUTING Receiver
Mutes the sound from the
receiver.
BASS +/– Receiver
Adjust the bass tone
quality.
Note
When you press the function buttons (VIDEO 1,
VIDEO 2, DVD), the input mode of the TV might not
switch to the corresponding input mode that you
want. In this case, press the TV/VIDEO button to
switch the input mode of the TV.
24GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
Button
Operations
Function
Remote
Button
Operations
Function
MASTER Receiver
VOL +/–
Adjusts the master
volumn of the receiver.
ENTER
TV/VCR/
Satellite tuner/ disc or track using the
After selecting a channel,
LD player/
MD deck/
DAT deck/
Tape deck
numeric buttons, press
to enter the value.
AV ?/1 TV/VCR/
Turns the audio and
video components on or
CD player/
VCD player/ off.
LD player/
DVD player/
MD deck/
RETURN VCD player
Go back to previous
menu.
DAT deck
CH/
PRESET +/–
Receiver
Scans and selects preset
stations.
SYSTEM Receiver/TV/ Turns off the receiver and
STANDBY VCR/Satellite other Sony audio/video
TV/VCR/
Satellite tuner
Selects preset channels.
(Press
tuner/CD
components.
AV ?/1 player/VCD
and ?/1 player/LD
at the same player/DVD
./> VCR/CD
Skips tracks.
player/
VCD player/
time)
player/MD
deck/DAT
deck/Tape
deck
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck
0-9
Receiver
Use with “SHIFT” button
to select tuner preset
station numeric input
during DIRECT
TUNING or MEMORY
mode.
m/M CD player/
Searches tracks
VCD player/ (forward or backward).
DVD player
VCR/LD
player/
MD deck/
DAT deck/
Tape deck
Fastforwards or
rewinds.
CD player/
VCD player/ 0 selects track 10.
LD player/
Selects track numbers.
MD deck/
DAT deck
N
VCR/CD
Starts play.
player/
TV/VCR/
Selects channel numbers.
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck
Satellite tuner
>10
CD player/
VCD player/ over 10.
LD player/
MD deck/
Tape deck
Selects track numbers
continued
25GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote button description
(continued)
Remote
Button
Operations
Function
-/--
TV
Selects the channel
entry mode, either one
or two digit.
Remote
Button
Operations
Function
X
VCR/CD
player/
VCD player/ with components in
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck
Pauses play or record.
(Also starts recording
TV/
VIDEO
TV
TV
TV
Selects input signal: TV
input or video input.
TV
VOL +/–
Adjust the volume of
the TV.
record standby.
TV
CH +/–
Selects preset TV
channels.
x
VCR/CD
player/
Stops play.
Notes
• Some functions explained in this section may not
work depending on the model of the receiver.
• The above explanation is intended to serve as an
example only.
Therefore, depending on the component the above
operation may not be possible or may operate
differently than described.
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck
ANT
TV/VTR
VCR
Selects output signal
from the aerial
• The DVD function is not available for set operation.
terminal: TV signal or
VCR program.
D.SKIP
CD player/
VCD player/
DVD player/
MD deck
Skips discs (multi-disc
changer only).
TOP
MENU
DVD player
Displays DVD title.
Displays DVD menu.
Enters the selection.
DVD
MENU
DVD player
ENTER
DVD player
DVD player
Return to the previous
menu or exits the menu.
F/f/G/g DVD player
Selects a menu item.
26GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To reset a button to its factory
setting
Repeat the above procedure.
Changing the factory
setting of a function button
To reset all the function buttons to
their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at
If the factory settings of the FUNCTION
buttons do not match your system components,
you can change them. For example, if you have
a tape deck and you do not have an MD deck,
you can assign the MD/TAPE button to your
tape deck.
the same time.
Note that the settings of the TUNER button
cannot be changed.
1 Hold down the Function button whose
function you want to change (for
example, MD/TAPE).
2 Press the corresponding button of the
component you want to assign to the
Function button (for example, 4 – Tape
deck).
The following buttons are assigned to select
the functions:
To operate
Press
CD player
1
DAT deck
2
MD deck
3
Tape deck A
4
Tape deck B
5
LD player
6
VCR (command mode VTR 1*)
VCR (command mode VTR 2*)
VCR (command mode VTR 3*)
TV
7
8
9
0
DSS (Digital Satellite Receiver)
DVD
>10
ENTER
.
VCD player
* Sony VCRs are operated with a VTR 1, 2 or 3
setting. These correspond to Beta, 8MM and
VHS respectively.
Now you can use the MD/TAPE button to
control the tape deck.
27GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation
Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|