3-294-004-12(1)
Micro HI-FI
Component
System
Operating Instructions
CMT-HX70BTR
CMT-HX50BTR
© 2008 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
purchased the product.
Applicable accessories: Remote
commander
Note on DualDiscs
A DualDisc is a two sided disc product
which mates DVD recorded material on
one side with digital audio material on
the other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback on
this product is not guaranteed.
Disposal of waste
batteries (applicable
in the European
Union and other
European countries
with separate
Music discs encoded with copyright
protection technologies
collection systems)
is product is designed to playback
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some
record companies. Please be aware that
among those discs, there are some that
do not conform to the CD standard and
may not be playable by this product.
is symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not be
treated as household waste. By ensuring
these batteries are disposed of correctly,
you will help prevent potentially negative
consequences for the environment and
human health which could otherwise be
caused by inappropriate waste handling of
the battery. e recycling of the materials
will help to conserve natural resources.
In case of products that for safety,
performance or data integrity reasons
require a permanent connection with an
incorporated battery, this battery should
be replaced by qualified service staff only.
To ensure that the battery will be treated
properly, hand over the product at end-of-
life to the applicable collection point for
the recycling of electrical and electronic
equipment.
e Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sony
Corporation is under license. Other
trademarks and trade names are those
of their respective owners.
“WALKMAN” and “WALKMAN”
logo are registered trademarks of Sony
Corporation.
MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and omson.
Windows Media is a registered
trademark of Microsoſt Corporation
in the United States and/or other
countries.
For all other batteries, please view the
section on how to remove the battery from
the product safely. Hand the battery over
to the applicable collection point for the
recycling of waste batteries.
For more detailed information about
recycling of this product or battery, please
contact your local Civic Office, your
household waste disposal service or the
shop where you purchased the product.
ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
ꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to parts and controls
is manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit (HCD-HX70BTR, HCD-HX50BTR/Compact Disc Receiver)
Front panel
Top panel
Continued
ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote (RM-AMU009)
BLUETOOTH indicator (page 19,
20)
Lights up when the Bluetooth function
is active.
BLUETOOTH button (page 17, 19,
20)
Press to make a connection,
disconnection, or pairing with a
Bluetooth device.
Unit: VOLUME control (page 13,
14, 17, 20, 24, 26)
Remote: VOLUME +/ button
(page 13, 14, 17, 20, 24, 26, 31)
Turn or press to adjust the volume.
(USB) port (page 21, 24, 43)
Connect to an optional USB device.
(open/close) button (page 13)
/ (power) button (page 12, 31,
36)
Press to turn on the system.
Press to open or close the disc tray.
AUDIO IN jack (page 26)
Connect to an optional audio
component.
STANDBY indicator (page 28, 32)
Lights up when the system is turned off.
PHONES jack
Connect the headphones.
Remote sensor (page 32)
ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback buttons and function
buttons
Unit: BLUETOOTH (play/
pause) button (page 16, 17)
Press to select the Bluetooth function.
Press to start or pause playback of the
music on the Bluetooth device (Bluetooth
mobile phone, etc.).
Unit: /CANCEL (stop/cancel)
button (page 13, 14, 16, 17, 19,
25)
Remote: (stop) button (page
13, 14, 16, 17, 19, 25)
Press to stop playback.
Press to cancel search.
Unit: USB (play/pause)
SEARCH button (page 13, 25)
Press to enter or exit search mode.
button (page 24)
Press to select the USB function.
Press to start or pause playback of an
optional USB device.
Unit: ENTER button (page 13, 16,
19, 21, 22, 25, 29)
Unit: CD (play/pause)
Remote: (enter) button (page
12, 13, 16, 19, 21, 22, 25, 29, 30,
31)
button (page 13)
Press to select the CD function.
Press to start or pause playback of a disc.
Press to enter the settings.
Remote: (play) button,
(pause) button
Press to start or pause playback.
/ (go back/go forward)
button (page 13, 17, 23, 25, 29)
Press to select a track or file.
Unit: TUNER/BAND button (page
14)
Press to select the TUNER function.
Press to select FM or AM reception
mode.
Unit: TUNE +/ (tuning) button
(page 14)
Remote: +/ (tuning) button
(page 14, 30)
Unit: FUNCTION button (page 13,
14, 24, 26)
Press to tune in the desired station.
Remote: FUNCTION +/ button
+/ (select folder) button
(page 13, 17, 23, 25, 29)
Press to select a folder.
(page 13, 14, 24, 26)
Press to select the function.
/ (rewind/fast forward)
button (page 13, 16, 17, 25)
Press to find a point in a track or file.
Continued
ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-USB SYNC/REC1 button (page
21, 22)
Press to record from a disc onto the
connected optional USB device.
RETURN button
Press to return to the previous menu
when using the DIGITAL MEDIA PORT
adapter.
/// button (page 12, 31)
USB MENU button (page 22, 23)
Press to select the menu items.
Press to erase audio files and folders from
the connected optional USB device.
Press to select which memory to read
to if the USB device has more than one
memory.
TUNER MEMORY button (page
30)
Press to preset the radio station.
Sound buttons (page 27)
Unit: DSGX button
PLAY MODE/TUNING MODE
button (page 13, 14, 21, 25, 29,
30)
Remote: EQ button
Press to select the sound effect.
Press to select the play mode of a CD,
MP3 disc or an optional USB device.
Press to select the tuning mode.
CLEAR button (page 17, 19, 29)
Press to delete a pre-programmed track
or file.
Press to erase the pairing registration
information of the Bluetooth device.
REPEAT/FM MODE button (page
13, 14, 25)
Press to listen to a disc, a single track or
file repeatedly.
Press to select the FM reception mode
(monaural or stereo).
TIMER MENU button (page 12,
31)
Press to set the clock and the Play Timer.
SLEEP button (page 31)
Press to set the Sleep Timer.
TOOL MENU button
Press to select a menu when using the
DIGITAL MEDIA PORT adapter.
DISPLAY button (page 17, 28)
Press to change the information on the
display.
Battery compartment lid
(page 12)
ꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Information on the display
Play/Pause
Audio format
BLUETOOTH
Lights up when the Bluetooth function
is selected.
Play mode (page 13, 25)
DSGX (page 27)
Tuner reception mode (page 14)
Tuner reception (page 14)
Timer (page 31)
CD-USB Recording (page 21)
USB MEMORY
Lights up when an optional USB device
is connected.
Text information
ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system securely
A CMT-HX50BTR is used for illustration purposes.
or
Wall socket
Right speaker
Left speaker
FM lead antenna (Extend it horizontally.)
White side for North American model
Brown side for other models
AM loop antenna
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Speakers
Available DIGITAL MEDIA PORT adapters
Connect the speaker cords to the
SPEAKER jacks.
vary in each area.
Do not connect an adaptor other than the
DIGITAL MEDIA PORT adapter.
Do not connect or disconnect the DIGITAL
MEDIA PORT adapter to/from the
DMPORT while the system is on.
For CMT-HX70BTR, connect the other
end of the speaker cords to the terminals
on the speakers as shown below.
When using a DIGITAL MEDIA PORT
adapter that has video output function,
connect the adaptor directly to the TV.
Insert only the stripped portion and
then turn the nut clockwise.
When carrying this system
1
Remove a disc to protect the CD
mechanism.
Black
()
Red
()
2
Press FUNCTION +/ (or FUNCTION
Red
()
on the unit)
repeatedly to select
the CD function.
3
4
Hold down SEARCH
and press
“STANDBY”appears.
on the unit,
on the unit until
Power
After “LOCK”appears, unplug the
power cord.
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
Speaker pads
Attach the supplied speaker pads to
the bottom of the speakers to prevent
slipping.
Antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
DMPORT (DIGITAL MEDIA PORT)
Connect the DIGITAL MEDIA PORT
adapter. You need to connect the
DIGITAL MEDIA PORT adapter to an
optional audio device (portable audio
player, etc.).
Continued
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the remote
Slide and remove the battery
Setting the clock
compartment lid , and insert the two
supplied R6 (size AA) batteries, side
first, matching the polarities shown
below.
Use buttons on the remote to set the
clock.
1
2
Press /
system.
to turn on the
.
Press TIMER MENU
e hour indication flashes in the
display.
If “PLAY SET?” flashes in the display,
press /
repeatedly to select
Notes
“CLOCK SET?” and then press
.
With normal use, the batteries should last for
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
repeatedly to set
the hour, and then press
3
4
Press /
.
Use the same procedure to set
the minutes.
e clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is off
Press DISPLAY . e clock is displayed
for about 8 seconds.
1ꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operations
Basic Operations
To
Press
Pause playback (or CD on the
unit) . To resume
Playing a CD/MP3 disc
play, press the button
again.
1
Select the CD function.
.
Stop playback
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
Select a folder
on an MP3
disc
Select a track /
or file
+/
.
2
Place a disc.
.
Press
on the unit, and place
a disc with the label side up on the
disc tray.
Select a folder SEARCH
on the
and file on
unit. Press /
an MP3 disc
to select the desired
while viewing folder, then press (or
the folder and ENTER on the unit)
.
file names on Press /
the display to select the desired
file, then press (or
.
ENTER on the unit)
Find a point in Hold down /
a track or file
during playback, and
To close the disc tray, press
on
release the button at the
desired point.
the unit again.
Do not force the disc tray closed with
your finger, as this may damage the
unit.
Select Repeat REPEAT
repeatedly
Play
until “REP” or “REP1”
appears.
3
4
Start playback.
Press (or CD on the unit)
To change the play mode
.
Press PLAY MODE
repeatedly while
the player is stopped. You can select
normal play (“ *” for all MP3 files
in the folder on the disc), shuffle play
Adjust the volume.
Press VOLUME +/ (or turn the
.
VOLUME control on the unit)
(“SHUF” or “
play (“PGM”).
(SHUF)
Play performs the same operation as normal
(shuffle) play.
SHUF*”), or program
*
When playing a CD-DA disc,
Continued
1ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Repeat Play
All tracks or files on a disc are played
Listening to the radio
repeatedly up to five times.
“REP1” indicates that a single track or file is
repeated until you stop it.
1
Select “TUNER FM”or “TUNER
AM.”
Notes on playing MPꢁ discs
Do not save other types of files or
unnecessary folders on a disc that has MP3
files.
Press FUNCTION +/ (or TUNER/
BAND on the unit)
repeatedly.
Folders that have no MP3 files are skipped.
MP3 files are played back in the order that
they are recorded onto the disc.
e system can only play MP3 files that have
a file extension of “.MP3”.
If there are files on the disc that have the
“.MP3” file extension, but that are not MP3
files, the unit may produce noise or may
malfunction.
e maximum number of:
folders is 255 (including the root folder).
MP3 files is 511.
2
3
Select the tuning mode.
Press TUNING MODE
until “AUTO” appears.
repeatedly
Tune in the desired station.
Press +/ (or TUNE +/ on
the unit) . Scanning stops
automatically when a station is tuned
in, and then “TUNED” and “ST” (for
stereo programs only) appear.
MP3 files and folders that can be
contained on a single disc is 512.
folder levels (the tree structure of files) is
8.
When you tune in a station that
provides RDS services, the station
name appears on the display
(European model only).
Compatibility with all MP3 encoding/writing
soſtware, recording device, and recording
media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted
audio or may not play at all.
4
Adjust the volume.
Press VOLUME +/ (or turn the
Notes on playing multisession discs
.
VOLUME control on the unit)
If the disc begins with a CD-DA (or MP3)
session, it is recognized as a CD-DA (or
MP3) disc, and other sessions are not played
back.
A disc with a mixed CD format is recognized
as a CD-DA (audio) disc.
To stop automatic scanning
.
Press
To tune in a station with a weak signal
If “TUNED” does not appear and the
scanning does not stop, press TUNING
MODE
repeatedly until “AUTO” and
“PRESET” disappear, and then press
+/ (or TUNE +/ on the unit)
repeatedly to tune in the desired station.
To reduce static noise on a weak FM
stereo station
Press FM MODE
repeatedly until
“MONO” appears to turn off stereo
reception.
1ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to music of a
Bluetooth mobile phone or
Bluetooth device
Using the Bluetooth
function
is system supports Bluetooth A2DP
and AVRCP profiles. For details on
Bluetooth wireless technology, see
“Bluetooth wireless technology” (page
42).
You can listen to music from your
Bluetooth mobile phone or Bluetooth
device over a wireless connection.
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://support.sony-europe.com/>
For customers in Latin America:
<http://www.sony-latin.com/index.crp>
For customers in Asia and Oceania:
<http://www.sony-asia.com/support>
Follow the procedure below to listen to
music from Bluetooth devices with this
system.
Pairing this system with a Bluetooth
device
Connecting to registered devices
Playing music of a Bluetooth device
For details about the operations of
the Bluetooth device, also refer to the
operation manual supplied with your
Bluetooth device.
Continued
1ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Pairing this system with a Bluetooth
device
4
Enter the passkey.
Passkey entry may be required
depending on the type of Bluetooth
device.
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Use the procedure below
to pair the system with your Bluetooth
device. Once a pairing operation is
performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music of
a Bluetooth device” (page 17).
When “PIN?” and a countdown
appear, enter the passkey at the
system as follows:
Press / and /
1
Place the Bluetooth device to be
connected to this system within
1 meter of the system.
on the remote (or
+/ and
/ on the unit)
to enter the same passkey that was
entered at the Bluetooth device, and
then press (or ENTER on the unit)
2
3
Select the Bluetooth function.
.
Press BLUETOOTH
the unit.
on
Once pairing is completed and the
connection is established, the system
display changes as follows:
Operate the Bluetooth device
and perform the pairing
operation.
“Connect”
device
Name of the Bluetooth
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
To cancel passkey entry partway
.
Press
If passkey entry still required, turn off the
Bluetooth device.
When searching for this system with
the Bluetooth device, a list of the
devices found may appear in the
Bluetooth device display depending
on the type of Bluetooth device.
is system appears as “CMT-
HX70BTR” or “CMT-HX50BTR”
depending on the model.
When establishing a connection with
this system, select the audio profile
(A2DP, AVRCP) at the Bluetooth
device. If the Bluetooth device does
not support the AVRCP profile, you
cannot perform playback or other
operations with the system (page 17).
Notes
“Passkey” may be called “Passcode,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
is system only supports numerical
passkeys up to 4 digits.
e pairing standby status of the system is
cancelled aſter about 30 seconds.
If pairing is not successful, redo the
procedure from step 1.
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
1ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To erase all the pairing registration
information
3
4
Start playback.
Press (or BLUETOOTH on
.
the unit)
on the
1
Press BLUETOOTH
unit.
Depending on the Bluetooth device,
you may need to start up the AV
soſtware of the Bluetooth device
beforehand.
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
and hold BLUETOOTH
on the
unit for about 2 seconds to put the
system in Bluetooth standby mode.
.
2
3
Press CLEAR
.
To check the address of a connected
Bluetooth device
“Delete?” appears.
Press DISPLAY
while the Bluetooth
.
Press (or ENTER on the unit)
“Complete!” appears and all the
pairing information is erased.
device name appears in the system
display.
e Bluetooth device address appears for
8 seconds.
Note
In order to connect with a Bluetooth device
aſter performing this operation, you must enter
the passkey again.
To cancel the connection with a
Bluetooth device
Press and hold BLUETOOTH
Playing music of a Bluetooth device
on the unit for about 2 seconds until
“Disconnect” appears, or until the
information on the display (device name,
etc.) disappears.
You can operate a Bluetooth device by
connecting the system and a Bluetooth
device using AVRCP.
1
2
Select the Bluetooth function.
Other operations
Press BLUETOOTH
the unit.
on
To
Press
Pause playback (or BLUETOOTH
Establish a connection from the
Bluetooth device.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
.
on the unit)
Stop playback
Select a folder
.
+/
/
.
Select a file
.
Find a point in Hold down /
a file
.
Once the connection is established,
the system display changes as follows:
“Connect”
device
Name of the Bluetooth
Note
ese operations may not be available for
certain Bluetooth devices. In addition, the
actual operations may differ depending on the
connected Bluetooth device.
Continued
1ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on connections with Bluetooth
devices
If you cannot connect with a paired
Bluetooth device, perform the pairing
operation between the system and the
Bluetooth device again.
Listening to music on this
system using Bluetooth
headphones
You can listen to music played on this
system using your Bluetooth headphones
over a wireless connection.
Depending on the type of Bluetooth device,
you can adjust the volume using the controls
of the Bluetooth device.
When BLUETOOTH
on the unit
is pressed while connected to Bluetooth
headphones, it may take some time until
a connection is made to the system from
another Bluetooth device.
Use the A2DP-capable or A2DP- and
AVRCP-capable Bluetooth device with the
system in a peer-to-peer environment.
Tip
Bluetooth devices that have been connected
with this system in the past are registered with
this system.
When a Bluetooth connection is not
currently established, you can easily
connect the system to a Bluetooth device
by pressing BLUETOOTH
on the
unit. (Connection is attempted with up to
3 devices in order from the most recently
connected device, and the attempts end when
a connection is established.) is function may
not be available depending on the Bluetooth
device you are using.
Follow the procedure below to listen
to music on this system with Bluetooth
headphones.
Pairing this system with Bluetooth
If a connection cannot be made, the system
returns to the standby mode.
headphones
Connecting to registered headphones
Playing music on this system
For details about the operations of the
Bluetooth headphones, also refer to the
operation manual supplied with your
Bluetooth headphones.
1ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Pairing this system with Bluetooth
headphones
To cancel passkey entry partway
.
Press
Pairing is an operation where Bluetooth
devices register with each other
Notes
“Passkey” may be called “Passcode,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
is system only supports numerical
passkeys up to 4 digits.
e pairing standby status of the system is
cancelled aſter about 30 seconds.
If pairing is not successful, redo the
procedure from step 1.
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
Pairing may not be possible if other
Bluetooth devices are present around the
system. In this case, turn off the other
Bluetooth devices.
beforehand. Use the procedure below
to pair the system with your Bluetooth
headphones. Once a pairing operation
is performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music on
this system” (page 20).
1
Select a function other than the
Bluetooth function.
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
2
3
Place the Bluetooth
headphones to be connected
to this system within 1 meter of
the system.
To erase all the pairing registration
information
on the
1
Press BLUETOOTH
unit.
Put the Bluetooth headphones
in pairing mode.
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
and hold BLUETOOTH
on the
unit for about 2 seconds to put the
system in Bluetooth standby mode.
4
5
Press and hold BLUETOOTH
on the unit for about 7 seconds
until the BLUETOOTH indicator
.
2
3
Press CLEAR
“Delete?” appears.
flashes.
.
Press (or ENTER on the unit)
“Complete!” appears and all the
pairing information is erased.
Sound output from the speakers is
stopped.
Enter the passkey.
Note
Follow the same procedure as in
step 4 of “Pairing this system with a
Bluetooth device” (page 16).
To connect with Bluetooth headphones aſter
performing this operation, you must enter the
passkey again.
Once pairing is completed and the
connection is established, the system
display changes as follows:
“Connect”
device
Name of the Bluetooth
Continued
1ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing music on this system
4
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
You can operate this system from
Bluetooth headphones by connecting the
system and Bluetooth headphones using
AVRCP.
.
To cancel the connection with
Bluetooth headphones
1
Select a function other than the
Bluetooth function.
Press and hold BLUETOOTH
on
the unit for about 2 seconds until the
Press FUNCTION +/ (or
BLUETOOTH indicator
turns off.
FUNCTION on the unit)
repeatedly.
Sound is output from the speakers.
Notes
2
Establish a connection with the
Bluetooth headphones.
If you cannot connect with paired Bluetooth
headphones, perform the pairing operation
between the system and the Bluetooth
headphones again.
Press and hold BLUETOOTH
on
the unit for about 2 seconds until the
When the system is changed to a function
BLUETOOTH indicator
then release the button.
lights up,
other than the Bluetooth function and
BLUETOOTH
on the unit is pressed
Sound output from the speakers is
stopped.
while connected to a Bluetooth device, it may
take some time until a connection is made
with the Bluetooth headphones.
If more than one Bluetooth device
that has been connected in the past
is present around the system, the
system attempts to connect with up
to 3 most recently connected devices.
(Connection is attempted with up
to 3 devices in order from the most
recently connected device, and the
attempts end when a connection is
established.)
is system stores separate volume settings
for when listening through the speakers
or PHONES jack
on the unit, or when
listening through Bluetooth headphones.
Use the A2DP-capable or A2DP- and
AVRCP-capable Bluetooth device with the
system in a peer-to-peer environment.
Once the connection is established,
the system display changes as follows:
“Connect” Name of the Bluetooth
device
3
Start playback of the music for
the function selected in step 1.
Depending on the type of Bluetooth
headphones, you can operate this
system (playback, volume control,
etc.) using the headphone’s controls.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
ꢀ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
When USB cable connection is
necessary, connect the USB cable
supplied with the USB device to be
connected.
See the operation manual supplied
with the USB device to be connected
for details on the operation method.
Recording from a disc
onto an USB device
You can connect an optional USB device
to the
(USB) port
on the unit and
record music from a disc to the USB
device.
2
3
Select the CD function, then
load the disc you want to
record.
You can record from a CD-DA disc or
MP3 disc only.
e audio format of files recorded by this
system is MP3.
e approximate size of the recording is
about 1 MB per minute of recording time
from a CD. e size may be larger when
recording from an MP3 disc.
See “USB devices” (page 43) for a list of
USB devices that can be connected to this
system.
Press PLAY MODE
repeatedly
to select the play mode when
the CD player is stopped.
e play mode automatically changes
to normal play mode, if you start
recording in shuffle play mode, repeat
play mode or in program play mode
(when no tracks or MP3 files are
programmed).
For details about the play mode, see
“To change the play mode” (page 13).
Synchro Recording
on
4
5
Press CD-USB SYNC/REC1
the unit.
You can easily record an entire disc onto
an USB device.
“REC” flashes, and the display cycles
through “SYNC REC,” “xxxMB Free”
(remaining space on the USB device)
and “Push ENTER.”
e USB device stands by for
recording and the CD player pauses
for play.
1
Connect a recordable USB
device to the (USB) port
as shown below.
Press (or ENTER on the unit)
.
Recording starts. When the recording
is completed, the CD player and the
USB device stop automatically.
USB device
Continued
ꢀ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To select the recording destination on
the USB device
Recording a single track or MP3
file during playback (REC1)
If the USB device has more than one
memory (for example, internal memory
and a memory card), you can select
which memory to read to and then start
recording.
You can easily record the track or MP3
file that is currently being played back
onto an USB device.
1
Connect the USB device to the
1
2
Connect a recordable USB
device to the (USB) port
(USB) port
.
.
2
Select the USB function.
Select the CD function, then
load the disc you want to
record.
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
on the unit in
3
Press USB MENU
stop mode.
3
4
Select the track or MP3 file you
want to record, then start play.
“Select?” appears. If an audio file or
a folder is selected, “Erase?” appears
Press CD-USB SYNC/REC1
on
instead. Press /
repeatedly
to select “Select?.”
the unit while the selected track
or MP3 file is being played back.
“REC” flashes, and the display cycles
through “REC 1,” “xxxMB Free”
(remaining space on the USB device)
and “Push ENTER.”
e USB device stands by for
recording and the CD player pauses
for play.
.
4
5
Press (or ENTER on the unit)
e name of a memory appears.
e displayed name varies depending
on the specifications of the USB
device.
Press /
repeatedly to
select the memory.
Proceed to step 6 if only one memory
can be selected.
5
Press (or ENTER on the unit)
To cancel this operation, press
.
.
Recording starts. When the recording
is completed, the CD player continues
to play.
.
6
7
Press (or ENTER on the unit)
Start recording by following steps 2
thorough 5 of “Synchro Recording”or
“Recording a single track or MP3 file
during playback (REC1).”
To stop recording
.
Press
ꢀꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To remove the USB device
Folder and file generation rules
When first recording to an USB device,
a “MUSIC” folder is created directly
below the “ROOT.” Folders and files are
generated within this “MUSIC” folder
as follows according to the recording
method.
1
Select the USB function.
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
on the unit in stop
mode until “No Device“ appears.
2
3
Hold down
Synchro Recording1)
Recording Folder name File name
source
Remove the USB device.
MP3
Same as the recording source2)
“CDDA001”3) “TRACK001”4)
To erase audio files or folders from the
USB device
CD-DA
You can erase audio files or folders from
the USB device.
REC1 recording
Recording Folder name File name
source
1
Connect a recordable USB device to
.
MP3
Same as the
recording
source2)
the
(USB) port
“REC1”5)
2
Select the USB function.
“TRACK001”4)
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
CD-DA
1)
In Program Play mode, the folder name is
“PGM_xxx,” and the file name depends on
the recording source (CD-DA disc or MP3
disc).
3
Press /
or
+/
repeatedly to select the audio file or
folder you want to erase.
2)
3)
Up to 32 characters of the name are assigned.
Folder numbers are assigned serially
thereaſter up to the maximum 999 (including
the “ROOT” and “MUSIC” folders).
File numbers are assigned serially thereaſter.
A new file is recorded in the “REC1” folder
each time REC1 recording is performed.
on the unit.
4
5
Press USB MENU
“Erase?” appears.
4)
5)
Press (or ENTER on the unit)
.
“Track Erase?” or “Folder Erase?”
appears in the display.
To cancel the erase operation, press
.
.
6
Press (or ENTER on the unit)
e selected audio file or folder is
erased.
Continued
ꢀꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Do not remove the USB device during
recording or erase operations. Doing so
may corrupt the data on the USB device or
damage the USB device itself.
Do not connect the system and the USB
device through an USB hub.
When recording from a CD, the tracks
are recorded as 128 kbps MP3 files. When
recording from an MP3 disc, MP3 files
are recorded with the same bit rate as the
original MP3 files.
While recording from an MP3 disc, no sound
is output and “High Speed” appears.
Listening to music of
an USB device
You can listen to music stored in the USB
device.
e audio formats that can be played
back by this system are as follows:
MP3*/WMA*/AAC*
See “USB devices” (page 43) for a list of
USB devices that can be connected to this
system.
* Files with copyright protection (Digital
Rights Management) cannot be played by
this system.
Files downloaded from an online music store
may not be played by this system.
CD text information is not recorded in the
created MP3 files.
If you cancel the recording partway, an
MP3 file is created up to the point when the
recording was stopped.
Recording stops automatically if:
the USB device runs out of space during
1
2
Select the USB function.
recording.
Press FUNCTION +/ (or
the number of audio files on the USB
device reaches the limit for the number
that the system can recognize.
e maximum number of audio files and
folders that can be contained on a single USB
device is 999 (including the “ROOT” and
“MUSIC” folders).
e maximum number of audio files and
folders may vary depending on the audio file
and folder structure.
FUNCTION on the unit)
repeatedly.
Connect an optional USB device
.
to the (USB) port
When the USB device is connected,
the display changes as follows:
“Reading”
“Storage Drive*”
* When connecting USB storage media,
the volume label is displayed next if
recorded.
You cannot erase audio files and folders in
shuffle play mode or program play mode.
If the folder to be erased contains non-MP3/
WMA/AAC format files or sub folders, these
are not erased.
If a folder or file that you are trying to record
already exists on the USB device with the
same name, a sequential number is added
aſter the name without overwriting the
original folder or file.
Note
It may take about 10 seconds before
“Reading” appears depending on the type
of USB device connected.
3
4
Start playback.
Press (or USB on the unit)
.
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
ꢀꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operations
To change the play mode
Press PLAY MODE
repeatedly while
To
Press
the USB device is stopped. You can select
normal play (“ ” for all files in the
folder on the USB device), shuffle play
Pause playback (or USB on
the unit) . To resume
(“SHUF” or “
play (“PGM”).
SHUF”), or program
play, press the button
again.
Stop playback
. To resume
Notes on the USB device
play, press (or
You cannot change the play mode during
USB on the unit)
playback.
1)
play, press
. To cancel resume
Some time may be needed to start playback
when:
again.
Select a folder
Select a file
the folder structure is complex.
the memory capacity is excessive.
When the USB device is inserted, the system
reads all the files on the USB device. If there
are many folders or files on the USB device,
it may take a long time to finish reading the
USB device.
+/
.
/
.
Select a folder SEARCH
on the
and file while unit. Press /
viewing the
to select the desired
folder and file folder, then press (or
names on the ENTER on the unit)
Do not connect the system and the USB
device through an USB hub.
system display2)
. Press /
With some connected USB devices, aſter an
operation is performed, there may be a delay
before it is performed by this system.
is system does not necessarily support all
the functions provided in a connected USB
device.
to select the desired
file, then press (or
ENTER on the unit)
.
Find a point in Hold down /
a file
during playback,
and release the button
at the desired point.
e playback order for the system may differ
from the playback order of the connected
USB device.
Always hold down
on the unit and
Select Repeat REPEAT
Play
repeatedly
make sure that “No Device” appears before
removing the USB device. Removing the USB
device while “No Device” is not displayed
may corrupt the data on it or damage the
USB device itself.
until “REP” or “REP1”
appears.
Hold down
the unit until “No
Device” appears, then
remove the USB device.
Remove the
USB device
on
Do not save other types of files or unnecessary
folders on an USB device that has audio files.
Folders that have no audio files are skipped.
1)
When playing a VBR MP3/WMA file,
the system may resume playback from a
different point.
You can search by different information such
as album or genre for digital music players.
e maximum number of audio files and
folders that can be contained on a single USB
device is 999 (including the “ROOT” and
“MUSIC” folders).
e maximum number of audio files and
folders may vary depending on the file and
folder structure.
2)
Continued
ꢀꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
e audio formats that you can listen to with
this system are as follows:
MP3: file extension “.mp3”
Windows Media Audio file: file extension
“.wma”
Using optional audio
components
AAC: file extension “.m4a”
1
Connect additional audio
component to the AUDIO
Note that even when file names have the
above file extensions, if the actual file differs,
the system may produce noise or may
malfunction.
Compatibility with all encoding/writing
soſtwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or interrupted
audio or may not play at all.
IN jack
on the unit using
an audio analog cord (not
supplied).
2
3
Turn down the volume.
Press VOLUME (or turn the
VOLUME control on the unit)
.
Select the AUDIO IN function.
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
4
5
Start playing the connected
component.
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
ꢀꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DIGITAL
Adjusting the sound
To add a sound effect
MEDIA PORT adapter
To
Press
1
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly to select “DMPORT.”
Generate a
more dynamic
sound
DSGX
on the unit.
(Dynamic
Sound
2
Start playing the connected
component.
Generator
X-tra)
e sound from the connected
component is played on the system.
For operation details, see the
operating instructions of the
Set the sound EQ
effect
repeatedly
to select “BASS”
or “TREBLE,” and
DIGITAL MEDIA PORT adapter.
then press +/
repeatedly to adjust the
Note
level.
Depending on the type of DIGITAL MEDIA
PORT adapter, you may be able to operate the
connected component using either the buttons
on the remote or the unit.
Tip
You can use the system as a battery charger for
the audio device connected to the DIGITAL
MEDIA PORT adapter while the system is on.
27GB
Download from Www.Somanuals.com. All Manuals Search And Download.
e following are displayed:
ID3 tag information for MP3 files when
ID3 version 1 and version 2 tags are used
(up to 62 characters for an MP3 disc).
e Russian model can display
information in Russian characters, but the
characters may not be displayed correctly
for discs created with some encoding/
writing soſtware and some recording
device.
e display information may not be updated
or displayed properly depending on the
Bluetooth device you are using.
e display information may differ
depending on the connected Bluetooth
device.
Changing the display
To
Press
Change
DISPLAY
repeatedly
information on when the system is on.
the display1)2)
Check the
DISPLAY
when
clock when the the system is off3). e
system is off
clock is displayed for 8
seconds.
1)
For example, you can view CD/MP3 disc
information or the USB device information,
such as;
e display information for the Bluetooth
device may not be updated properly
depending on the communication
track or file number during normal play.
track or file name (“ ”) during normal
play.
environment or surrounding conditions.
artist name (“ ”) during normal play.
album or folder name (“
normal play.
”) during
total playing time while the player is
stopped.
2)
When the system and a Bluetooth device are
connected using the Bluetooth function, you
can view the Bluetooth device address.
If the connected Bluetooth device supports
metadata transfer, you can also view the
Bluetooth device information during
playback, such as the elapsed playing time,
track title, artist name, album name, etc.
3)
e STANDBY indicator
on the unit
lights up when the system is off.
Notes on the display information
Characters that cannot be displayed appear
as “_”.
e following are not displayed:
total playing time for a CD-DA disc
depending on the play mode.
total playing time and remaining playing
time for an MP3 disc and USB device.
e following are not displayed correctly:
folder and file names that do not follow
either the ISO9660 Level 1, Level 2 or
Joliet in the expansion format.
ꢀꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press (or ENTER on the unit)
to add the track or file to the
program.
Other Operations
Creating your own
CD
“ . ” appears when the total
program time exceeds 100 minutes
for a CD, or when you select a CD
track whose number is 21 or over, or
when you select an MP3 file.
program
(Program Play)
1
Select the desired function.
CD
USB
Press FUNCTION +/ (or
e total program time cannot be
displayed, so “ . ” appears.
FUNCTION on the unit)
repeatedly to select the CD function.
5
6
Repeat steps 3 through 4 to
program additional tracks or
files, up to a total of 25 tracks or
files.
USB
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly to select the USB function.
repeatedly
2
3
Press PLAY MODE
until “PGM”appears while the
system is stopped.
To play your program of tracks
.
or files, press
e program remains available until
you open the disc tray or remove
the USB device. To play the same
Press /
until the desired track or file
number appears.
repeatedly
.
program again, press
To cancel Program Play
When programming files, press
Press PLAY MODE
repeatedly until
+/
repeatedly to select the
“PGM” disappears while the system is
stopped.
desired folder, and then select the
desired file.
Example: When programming tracks
on a CD
To delete the last track or file of the
program
Press CLEAR
stopped.
while the system is
Selected track or file number Total playing time of
program (including
selected track or file)
ꢀꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
To call up a preset radio
Presetting radio
stations
You can preset your favorite radio
stations and tune them in instantly
by selecting the corresponding preset
number.
Use buttons on the remote to preset
stations.
station, press TUNING MODE
repeatedly until “PRESET”
appears, and then press +/
repeatedly to select the desired
preset number.
1
Tune in the desired station (see
“Listening to the radio”(page
14)).
.
2
Press TUNER MEMORY
Preset number
3
Press +/
repeatedly to
select your desired preset
number.
If another station is already assigned
to the selected preset number,
the station is replaced by the new
stations.
.
4
5
Press
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 FM and 10
AM stations.
e preset stations are retained
for about half a day even if you
disconnect the power cord or if a
power failure occurs.
ꢁ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Select the sound source.
Using the Timers
e system offers two timer functions.
If you use the Play Timer with the Sleep
Timer, the Sleep Timer has priority.
Press /
repeatedly until the
desired sound source appears, and
then press
the timer settings.
. e display shows
Press /
to turn off the
Sleep Timer:
system.
You can fall asleep to music. is
function works even if the clock is not
set.
e system turns on 15 seconds
before the preset time. If the system is
on at the preset time, the Play Timer
will not play.
Press SLEEP
repeatedly.
If you select “AUTO,” the system
automatically turns off aſter the current
disc or USB device stops or in 100
minutes.
Note
Before the system is turned off, if a connection
is made with the Bluetooth headphones,
sounds played by the Play Timer may be output
to the Bluetooth headphones.
Play Timer:
You can wake up to CD, tuner or optional
USB device at a preset time.
Use buttons on the remote to control the
Play Timer. Make sure you have set the
clock.
To activate or check the timer again
.
1
Press TIMER MENU
“TIMER SEL?” flashes in the display.
2
3
Press
.
1
Prepare the sound source.
Press /
repeatedly to select
Prepare the sound source, and then
“PLAY SEL?.”
press VOLUME +/
volume.
to adjust the
.
4
Press
To start from a specific track or file,
create your own program (page 29).
To cancel the timer
.
2
3
Press TIMER MENU
.
1
Press TIMER MENU
“TIMER SEL?” flashes in the display.
Press /
repeatedly to
select “PLAY SET?,”and then
.
2
3
Press
.
press
Press /
repeatedly to select
“ON TIME” appears, and the hour
indication flashes.
“TIMER OFF?.”
.
4
Press
4
5
Set the time to start playing.
To change the setting
Press /
repeatedly to set the
hour, and then press
. e
Start over from step 1.
minute indication flashes. Use the
procedure above to set the minutes.
Tip
e Play Timer setting remains as long as the
setting is not canceled manually.
Use the same procedure as in
step 4 to set the time to stop
playing.
ꢁ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Severe hum or noise.
Move the system away from sources of
Others
noise.
Connect the system to a different wall
socket.
Install a noise filter (available
separately) to the power cord.
Troubleshooting
Make sure the power cord and
speaker cords are correctly and firmly
connected.
1
There is no sound.
If the BLUETOOTH indicator
is lit
2
Find your problem in the checklist
below, and take the indicated
corrective action.
If the issue persists, contact your
nearest Sony dealer.
or flashing when a function other than
the Bluetooth function is selected, no
sound is heard through the speakers
or PHONES jack . Press and hold
BLUETOOTH
for about 2 seconds
until the BLUETOOTH indicator
turns off.
If the STANDBY indicator flashes
Immediately unplug the power cord,
and check the following items.
If your system has a voltage
selector, is the voltage selector set to
the correct voltage?
The remote does not function.
Remove any obstacles between the
remote and the remote sensor
on
the unit, and position the unit away
from fluorescent lights.
Are you using only the supplied
speakers?
Point the remote at the system’s sensor.
Move the remote closer to the system.
Is anything blocking the ventilation
holes on the top or back of the
system?
The STANDBY indicator
remains lit
after unplugging the power cord.
Aſter the STANDBY indicator
e STANDBY indicator
may not
stops flashing, reconnect the power
cord, and turn on the system. If the
issue persists, contact your nearest
Sony dealer.
turn off immediately aſter unplugging
the power cord. is is not a
malfunction. e indicator will turn off
aſter about 40 seconds.
CD/MP3 player
General
The sound skips, or the disc will not
play.
Wipe the disc clean, and replace it.
Move the system to a location away
from vibration (for example, on top of
a stable stand).
Move the speakers away from the
system, or place them on separate
stands. At high volume, speaker
vibration may cause the sound to skip.
Sound comes from one channel,
or the left and right volumes are
unbalanced.
Place the speakers as symmetrically as
possible.
Connect only the supplied speakers.
ꢁꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Play does not start from the first
track.
Erase the pairing registration
information of a Bluetooth device and
perform the pairing operation again.
Press PLAY MODE
repeatedly until
both “PGM” and “SHUF” disappear to
return to normal play.
The sound skips or fluctuates, or the
connection is lost.
e system and the Bluetooth device
are too far apart.
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
Starting playback takes more time
than usual.
e following discs take a longer time
to start playback.
a disc recorded with a complicated
tree structure.
a disc recorded in multisession
mode.
a disc that has not been finalized (a
disc to which data can be added).
a disc that has many folders.
The sound of your Bluetooth device
cannot be heard on this system.
Bluetooth device
Turn up the volume on your Bluetooth
device first, and then adjust the volume
Pairing cannot be done.
Move the Bluetooth device closer to
the system.
Pairing may not be possible if other
Bluetooth devices are present around
the system. In this case, turn off the
other Bluetooth devices.
Enter the same passkey that was
entered at the Bluetooth device
correctly.
.
using VOLUME +/
Severe hum or noise
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
Connection is not possible.
Turn down the volume of the
connected Bluetooth device.
e Bluetooth device you attempted
to connect does not support the A2DP
profile, and cannot be connected with
the system.
Enable the Bluetooth function of the
Bluetooth device.
The sound from the Bluetooth
headphones is distorted.
Turn down the volume of the system
using VOLUME . If your
Establish a connection from the
Bluetooth device.
headphones have a volume control,
also adjust the volume using the
headphone’s volume control.
e pairing registration information
has been erased. Perform the pairing
operation again.
While connected to a Bluetooth device,
this system cannot be detected and a
connection cannot be established from
another Bluetooth device.
Press DSGX
on the unit repeatedly
until “DSGX OFF” appears.
Press EQ
repeatedly to select
“BASS” or “TREBLE,” and then press
level.
repeatedly to turn down the
Continued
ꢁꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
e USB device was disconnected
or the power was turned off during
recording. Delete the partially-
recorded file, and record again. If this
does not fix the problem, the USB
device may be broken. Refer to the
USB device operation manual for
how to deal with this problem. If the
problem persists, contact your nearest
Sony dealer.
USB device
You cannot start recording to an USB
device.
e following problems may have
occurred.
e USB device is full.
e number of files and folders on
the USB device has reached the
upper limit.
e USB device is write-protected.
Files or folders on the USB device
cannot be erased.
Check if the USB device is write-
protected.
e USB device was disconnected
or the power was turned off during
the erase operation. Delete the
partially-erased file. If this does not
fix the problem, the USB device may
be broken. Refer to the USB device
operation manual for how to deal with
this problem. If the problem persists,
contact your nearest Sony dealer.
Recording is stopped before it is
finished.
You are using an unsupported USB
device. See “USB devices” (page 43) for
the supported device types.
e USB device is not formatted
correctly. Refer to the USB device
operation manual for how to format.
Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device
off and then on again aſter removing
it from the system. en perform
recording again.
Are you using a supported USB
device?
If the recording and erase operations
are repeated multiple times, the file
structure within the USB device
becomes fragmented. Refer to the USB
device operation manual for how to
deal with this problem. If the problem
persists, contact your nearest Sony
dealer.
If you connect an unsupported USB
device, the following problems may
occur. See “USB devices” (page 43) for
the supported device types.
e USB device is not recognized.
File or folder names are not
displayed on this system.
Playback is not possible.
e sound skips.
ere is noise.
A distorted sound is output.
Recording stops before it is finished.
Recording to an USB device results in
an error.
You are using an unsupported USB
device. See “USB devices” (page 43) for
the supported device types.
Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device
off and then on again aſter removing
it from the system. en perform
recording again.
ꢁꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
“Over Current”appears.
Erroneous display
A problem has been detected with the
Send the music data to the USB device
again, as the data stored in the USB
device may have been corrupted.
e character codes that can be
displayed by this system are numbers
and alphabet only. Other characters are
not displayed correctly.
level of electrical current from the
(USB) port . Turn off the system and
remove the USB device from the
(USB) port . Make sure there is no
problem with the USB device. If this
display pattern persists, contact your
nearest Sony dealer.
The USB device is not recognized.
Turn off the system and reconnect the
USB device, then turn on the system.
Connect the supported USB device
(page 43).
e USB device does not work
properly. Refer to the USB device
operation manual for how to deal with
this problem. If the problem persists,
contact your nearest Sony dealer.
There is no sound.
e USB device is not connected
correctly. Turn off the system and
reconnect the USB device, then turn
on the system and check if “USB
MEMORY” appears.
There is noise, skipping, or distorted
sound.
Turn off the system, then reconnect the
USB device.
e music data itself contains noise, or
the sound is distorted. Noise may have
entered during the recording process.
Delete the file, and try recording again.
Play does not start.
Turn off the system and reconnect the
USB device, then turn on the system.
Connect the supported USB device
(page 43).
Press (or USB on the unit)
The USB device cannot be connected
to start play.
.
into the
(USB) port
e USB device is being connected
backwards. Connect the USB device in
the correct orientation.
Play does not start from the first
track.
Set the play mode to Normal Play
mode.
“Reading”is displayed for an
extended time, or it takes a long time
before playback starts.
e reading process can take a long
time in the following cases.
ere are many folders or files on the
USB device.
e file structure is extremely
complex.
e memory capacity is excessive.
e internal memory is fragmented.
us, we recommend following these
guidelines.
Total folders on USB device: 100 or
less
Files cannot be played back.
The audio file does not have the
extension “.mp3”, “.wma”, “.m4a”.
The data is not stored in MP3/WMA/
AAC format.
USB storage media formatted with file
systems other than FAT16 or FAT32
are unsupported.*
If you use partitioned USB storage
media, only files on the first partition
can be played.
Playback is possible up to 8 levels.
Total files per folder: 100 or less
Continued
ꢁꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
The number of folders has exceeded
To improve tuner reception
999.
Turn off CD player power by using the
CD power management function. By
default, CD power is turned on.
The number of files has exceeded 999.
Files that are encrypted or protected by
passwords, etc. cannot be played back.
1
2
Press FUNCTION +/ (or FUNCTION
on the unit)
repeatedly to select
*
is system supports FAT16 and FAT32, but
some USB storage media may not support all
of these FAT. For details, see the operation
manual of each USB storage media or
contact the manufacturer.
the CD function, and then turn off
the system.
After “STANDBY”stops flashing, press
/
on the unit while holding
Tuner
down /CANCEL
on the unit.
“CD POWER OFF” appears. With CD
player power turned off, disc access
time is increased. To turn on CD
player power, repeat the procedure
until “CD POWER ON” appears.
Severe hum or noise, or stations
cannot be received. (“TUNED”or“ST”
flashes on the display.)
Connect the antenna properly.
Find a location and an orientation that
provide good reception, and then set
up the antenna again.
Keep the antennas away from the
speaker cords, the power cord and the
USB cable to avoid picking up noise.
Connect a commercially available
external antenna.
Consult your nearest Sony dealer if the
supplied AM antenna has come off the
plastic stand.
To reset the system to factory settings
If the system still does not operate
properly, reset the system to factory
settings.
Use buttons on the unit to reset the
system to its factory default settings.
1
Disconnect and reconnect the power
cord, and then turn on the system.
2
Press /CANCEL , DSGX
and
Turn off nearby electrical equipment.
/
at the same time.
All user-configured settings, such as
preset radio stations, timer, and the
clock, are deleted.
To change the AM tuning interval
e AM tuning interval is factory-preset
to 9 kHz (or 10 kHz, for some areas; this
function is not available on the European
and Russian models).
Use buttons on the unit to change the
AM tuning interval.
1
Tune in any AM station, and then
turn off the system.
2
While holding down TUNER/BAND
, press /
.
All the AM preset stations are erased.
To reset the interval to the factory
preset, repeat the procedure.
ꢁꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Please Wait: e system is readying for
usage of a Bluetooth device.
Messages
USB device
CD/MP3 player, Tuner
Complete!: e audio file or folder on
Complete!: e preset operation ended
the USB device has been erased.
normally.
Device Full!: e USB device is full.
Erase Error!: Erase of audio files or
folders on the USB device failed.
LOCKED: e disc tray does not open.
Contact your nearest Sony dealer.
No Disc: ere is no disc in the system,
or you have loaded a disc that cannot
be played.
No Step: All of the programmed tracks
or files have been erased.
Error: e USB device could not be
recognized or an unknown device is
connected (page 35).
Fatal Error!: e USB device has been
disconnected while recording to or
erasing audio files or folders on the
USB device.
Folder Full!: e number of folders
on the USB device has reached the
maximum.
No Device: No USB device is connected
or the connected USB device has been
stopped.
Over: You have reached the end of the
disc while pressing
during
playback or pause.
Push STOP!: You pressed PLAY MODE
during playback.
Reading: e system is reading
information of the disc. Some buttons
are not available.
Step Full!: You tried to program more
than 26 tracks or files (steps).
TIME NG!: e Play Timer start and end
times are set to the same time.
No Step: All of the programmed tracks
or files have been erased.
No Track: No playable file is loaded in
the system.
Not in Use: You have made an invalid
Bluetooth device
operation.
Connect: Bluetooth communication was
Not Supported: An unsupported USB
device is connected.
Please Wait: e system is readying for
usage of an USB device.
Protected!: You tried to record or erase
a write-protected USB device.
Reading: e system is recognizing the
USB device.
Rec Error!: Recording did not start,
stopped partway, or otherwise could
not be performed (page 34).
Removed: e USB device has been
removed.
Step Full!: You tried to program more
than 26 tracks or files (steps).
Storage Drive: USB device is connected.
established.
Connecting: e system is attempting
to connect with recently connected
Bluetooth devices.
Disconnect: Communication with a
Bluetooth device was cut off for some
reason, or Bluetooth communication
was ended.
No Device: A pairable Bluetooth device
was not found, or connection was not
possible.
Not in Use: e system is not connected
with a Bluetooth device using A2DP, or
the Bluetooth device does not support
a command for selecting a folder
operations (
+/ ).
Track Full!: e number of files on the
USB device has reached the maximum.
PIN?: e system is asking for the
passkey. For details, see “Using the
Bluetooth function” (page 15).
ꢁꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
On safety
Completely disconnect the power
cord (mains lead) from the wall socket
(mains) if it is not going to be used
for an extended period of time. When
unplugging the unit, always grip the
plug. Never pull the cord itself.
Precautions
Discs that this system CAN play
Audio CD
CD-R/CD-RW (audio data/MP3 files)
Should any solid object or liquid get
into the system, unplug the system, and
have it checked by qualified personnel
before operating it again.
e AC power cord can be changed
only by a qualified service facility.
Discs that this system CANNOT play
CD-ROM
CD-R/CD-RW other than those
recorded in music CD format or MP3
format conforming to ISO9660 Level
1/Level 2, Joliet or multisession
CD-R/CD-RW recorded in
multisession that have not ended by
“closing the session”
CD-R/CD-RW of poor recording
quality, CD-R/CD-RW that have
scratches or are dirty, or CD-R/CD-
RW recorded with an incompatible
recording device
CD-R/CD-RW which is finalized
incorrectly
Discs containing files other than
MPEG 1 Audio Layer-3 (MP3) files
On placement
Do not place the system in an inclined
position or in locations that are
extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation,
or subject to vibration, direct sunlight
or a bright light.
Be careful when placing the unit
or speakers on surfaces that have
been specially treated (for example,
with wax, oil, polish) as staining or
discoloration of the surface may result.
Discs of non-standard shape (for
If the system is brought directly
from a cold to a warm location or is
placed in a very damp room, moisture
may condense on the lens inside the
CD player, and cause the system to
malfunction. In this situation, remove
the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
example, heart, square, star)
Discs that have adhesive tape, paper, or
sticker attached to them
Rental or used discs with attached seals
where the glue extends beyond the seal
Discs that have labels printed using ink
that feels tacky when touched
Notes on discs
On heat buildup
Before playing, wipe the disc with a
cleaning cloth from the center out to
the edge.
Do not clean discs with solvents, such
as benzine thinner, or commercially
available cleaners or anti-static spray
intended for vinyl LPs.
Do not expose discs to direct sunlight
or heat sources such as hot air ducts,
nor leave it in a car parked in direct
sunlight.
Heat buildup on the unit during
operation is normal and is not cause
for alarm.
Do not touch the cabinet if it has been
used continuously at a high volume
because the cabinet may have become
hot.
Do not obstruct the ventilation holes.
ꢁꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
On the speaker system
is speaker system is not magnetically
shielded, and the picture on nearby TV
sets may become magnetically distorted.
In this situation, turn off the TV, wait
15 to 30 minutes, and turn it back on.
If there is no improvement, move the
speakers far away from the TV.
Specifications
Main unit (HCD-HX70BTR, HCD-HX50BTR/
Compact Disc Receiver)
Amplifier section
Cleaning the cabinet
CMT-HXꢄ0BTR
Clean this system with a soſt cloth
slightly moistened with a mild detergent
solution. Do not use any type of abrasive
pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
DIN power output (rated):
60 + 60 watts (4 ohms at 1 kHz, DIN)
Continuous RMS power output
(reference): 75 + 75 watts (4 ohms at
1 kHz, 10% THD)
Music power output (reference):
75 + 75 watts (4 ohms at 1 kHz, 10%
THD)
CMT-HXꢂ0BTR
European and Russian models:
DIN power output (rated):
40 + 40 watts (6 ohms at 1 kHz, DIN)
Continuous RMS power output
(reference): 50 + 50 watts (6 ohms at
1 kHz, 10% THD)
Music power output (reference):
50 + 50 watts (6 ohms at 1 kHz, 10%
THD)
Other models:
DIN power output (rated):
40 + 40 watts (6 ohms at 1 kHz, DIN)
Continuous RMS power output
(reference): 50 + 50 watts (6 ohms at
1 kHz, 10% THD)
Inputs:
AUDIO IN (stereo mini jack):
voltage 250 mV, impedance
22 kilohms
(USB) port: Type A, maximum
current 500 mA
Outputs:
PHONES (stereo mini jack): accepts
headphones of 8 ohms or more
SPEAKER: accepts impedance of
4 ohms (CMT-HX70BTR) or 6 ohms
(CMT-HX50BTR)
Continued
ꢁꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth section
CD player section
Communication system:
System: Compact disc and digital audio
system
Bluetooth Standard version 2.0
Output:
Laser Diode Properties
Bluetooth Standard Power Class 2
Emission duration: Continuous
Laser Output*: Less than 44.6µW
* is output is the value measurement
at a distance of 200mm from the
objective lens surface on the Optical
Pick-up Block with 7mm aperture.
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Maximum communication range:
Line of sight approx. 10 m1)
Frequency band:
2.4 GHz band (2.4000 GHz
2.4835 GHz)
Modulation method:
FHSS
Compatible Bluetooth profiles2):
A2DP (Advanced Audio Distribution
Profile)
Tuner section
FM stereo, FM/AM superheterodyne tuner
AVRCP (Audio Video Remote
Control Profile)
Supported codecs:
FM tuner section:
Tuning range
Receive: SBC (Sub Band Codec), MP3
Transmit: SBC (Sub Band Codec)
e actual range will vary depending on
Canadian model: 87.5 108.0 MHz
(100 kHz step)
1)
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna’s performance, operating system,
soſtware application, etc.
Bluetooth standard profiles indicate the
purpose of Bluetooth communication
between devices.
Other models: 87.5 108.0 MHz
(50 kHz step)
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section:
2)
Tuning range
European and Russian models:
531 1,602 kHz (with 9 kHz tuning
interval)
USB section
Supported bit rate
Canadian and Latin American
models:
MP3 (MPEG 1 Audio Layer-3):
32 320 kbps, VBR
WMA: 32 192 kbps, VBR
AAC: 48 320 kbps
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
530 1,710 kHz (with 10 kHz tuning
interval)
531 1,710 kHz (with 9 kHz tuning
interval)
Australian model:
531 1,710 kHz (with 9 kHz tuning
interval)
WMA: 44.1 kHz
AAC: 44.1 kHz
530 1,710 kHz (with 10 kHz tuning
interval)
Other models:
531 1,602 kHz (with 9 kHz tuning
interval)
530 1,610 kHz (with 10 kHz tuning
interval)
Antenna: AM loop antenna, external
antenna terminal
Intermediate frequency: 450 kHz
ꢆ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Design and specifications are subject to
change without notice.
Speaker (SS-CHX70 for CMT-HX70BTR)
Speaker system: 2 way speaker system, Bass
reflex
Standby power consumption:
0.5 W
Halogenated flame retardants
are not used in the certain
printed wiring boards.
Halogenated flame retardants
are not used in cabinets.
Speaker units: Woofer 13 cm, glass fiber
cone type, Tweeter 2.5 cm, soſt dome type
Rated impedance: 4 ohms
Dimensions (w/h/d): Approx. 172 × 331 ×
225 mm
Mass: Approx. 3.7 kg
Speaker (SS-CHX50 for CMT-HX50BTR)
Speaker system: 2 way speaker system, Bass
reflex
Speaker units: Woofer 12 cm, cone type,
Tweeter 4 cm, cone type
Rated impedance: 6 ohms
Dimensions (w/h/d): Approx. 146 × 262 ×
200 mm
Mass: Approx. 2.2 kg
General
Power requirements
European and Russian models:
220 240 V AC, 50/60 Hz
Canadian model: 120 V AC, 60 Hz
Mexican model: 127 V AC, 60 Hz
Australian model: 220 240 V AC,
50/60 Hz
Korean model: 220 240 V AC,
50/60 Hz
Latin American models (except for
Mexican model):
120 127, 220 240 V AC,
50/60 Hz, adjustable with voltage
selector
Other models:
220 240 V AC, 50/60 Hz
Power consumption
CMT-HX70BTR: 50 watts
CMT-HX50BTR: 40 watts
Dimensions (w/h/d) (excl. speakers):
Approx. 305 × 116 × 225 mm
Mass (excl. speakers): Approx. 2.8 kg
Supplied accessories: Remote Commander
(RM-AMU009) (1), R6 (Size AA) batteries
(2), AM loop antenna (1), FM lead antenna
(1), Speaker pads (8), Speaker cable (2)
(CMT-HX70BTR only), DIGITAL MEDIA
PORT adapter (TDM-iP10 (M)) (For
Canadian model and European model
(except for Russian model))
41GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective communication range
Bluetooth devices should be used within
approximately 10 meters (unobstructed
distance) of each other. e effective
communication range may become
shorter under the following conditions.
Bluetooth wireless
technology
Bluetooth wireless technology is a short-
range wireless technology linking digital
devices, such as personal computers and
digital still cameras. Using the Bluetooth
wireless technology, you can operate the
units involved within a range of about 10
meters.
When a person, metal object, wall
or other obstruction is between the
devices with a Bluetooth connection
Locations where a wireless LAN is
installed
Around microwave ovens that are in
use
Locations where other electromagnetic
waves occur
e Bluetooth wireless technology is
commonly used between two devices,
but a single device can be connected to
multiple devices.
You do not need wires to get connected
as you do with a USB connection, and
you do not need to place the devices face
to face as you do with wireless infrared
technology. You can use the technology
with one Bluetooth device in your bag
or pocket.
Bluetooth wireless technology is a global
standard supported by thousands of
companies. ese companies produce
products that meet the global standard.
Effects of other devices
Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When using your
Bluetooth device near a device with
wireless LAN capability, electromagnetic
interference may occur. is could result
in lower data transfer rates, noise, or
inability to connect. If this happens, try
the following remedies:
Try connecting this system and
Bluetooth mobile phone or Bluetooth
device when you are at least 10
meters away from the wireless LAN
equipment.
Turn off the power to the wireless LAN
equipment when using your Bluetooth
device within 10 meters.
Supported Bluetooth version and
profiles
Profile refers to a standard set of
capabilities for various Bluetooth product
capabilities. is system supports the
following Bluetooth version and profiles.
Supported Bluetooth version:
Bluetooth Standard version 2.0
Supported Bluetooth profiles:
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote
Control Profile)
ꢆꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Effects on other devices
e radio waves broadcast by this system
may interfere with the operation of some
medical devices. Since this interference
may result in malfunction, always turn
off the power on this system, Bluetooth
mobile phone and Bluetooth device in
the following locations:
Compatible devices
with this system
USB devices
You can use the following Sony USB
devices on this system. Other USB
devices are not playable/recordable on
this system.
In hospitals, on trains, in airplanes,
at gas stations, and any place where
flammable gasses may be present
Near automatic doors or fire alarms
Verified Sony digital music player (as
of March 2008)
Notes
is system supports security functions that
comply with the Bluetooth specification
as a means of ensuring security during
communication using Bluetooth technology.
However, this security may be insufficient
depending on the setting contents and
other factors, so always be careful when
performing communication using Bluetooth
technology.
Sony cannot be held liable in any way
for damages or other loss resulting from
information leaks during communication
using Bluetooth technology.
Product name Model name
NWD-B103 / B103F /
Walkman
®
B105 / B105F
NWZ-B103F / B105F
NWZ-A815 / A816 /
A818
NWZ-S515 / S516 /
S615F / S616F / S618F
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
Bluetooth communication is not necessarily
guaranteed with all Bluetooth devices that
have the same profile as this system.
Bluetooth devices connected with this system
must comply with the Bluetooth specification
prescribed by the Bluetooth SIG, Inc., and
must be certified to comply. However, even
when a device complies with the Bluetooth
specification, there may be cases where
the characteristics or specifications of the
Bluetooth device make it impossible to
connect, or may result in different control
methods, display or operation.
Noise may occur or the audio may
cut off depending on the Bluetooth
device connected with this system,
the communications environment, or
surrounding conditions.
<http://www.sony.com/shelfsupport>
For customers in Canada:
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://support.sony-europe.com/>
For customers in Latin America:
<http://www.sony-latin.com/index.crp>
For customers in Asia and Oceania:
<http://www.sony-asia.com/support>
Notes
When formatting the USB device, be sure
to format using the device itself or the
dedicated formatting soſtware for that device.
Otherwise, you may be unable to record the
USB device properly on this system.
Continued
43GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not use USB devices other than these
USB devices. Operation of models not listed
here is not guaranteed.
Operation may not always be ensured even
when using these USB devices.
Some of these USB devices may not be
available for purchase in certain areas.
Notes on Walkman
®
When transferring music to a Walkman
®
using “Media Manager for WALKMAN,” be
sure to transfer in MP3 format. Files in MP4
format (AAC or VIDEO) are not displayed
by this system.
When connecting a Walkman to the system,
®
be sure to connect aſter the display “Creating
Library” or “Creating Database” on the
Walkman has disappeared.
®
Bluetooth devices
You can check the websites below for the
Bluetooth compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://support.sony-europe.com/>
For customers in Latin America:
<http://www.sony-latin.com/index.crp>
For customers in Asia and Oceania:
<http://www.sony-asia.com/support>
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|
