Sharp Stereo System CD SW440N User Manual

ENGLISH  
MODEL  
CD-SW440N  
MINI COMPONENT SYSTEM  
OPERATION MANUAL  
CD-SW440N Mini Component System consisting of CD-SW440N (main unit), CP-S440N (speaker system) and  
CP-SW440N (subwoofer).  
ENERGY STAR® Program Information  
T
S
T
E
M
P
O
E
N
S
Y
M
I
N
I
C
O
M
N
440  
CD-SW  
F
U
N
C
T
I
O
N
Products that have earned  
the ENERGY STAR® are  
designed to protect the  
environment through  
P
O
W
ER  
TA  
B
O
N
/
S
N
D
-
Y
CD  
USB  
P
O
U
S
H
P
E
N
superior energy efficiency.  
I
N
A
U
D
IO  
TAPE  
S
P
H
O
N
E
ENERGY STAR® is a U.S. registered mark.  
iPod is a trademark of Apple Inc.,  
registered in the U.S. and other countries.  
Accessories  
Please confirm that only the following accessories are included.  
D
U
B
S
C
T
A
PE  
Remote control x 1  
RRMCGA205AWSA  
AM loop antenna x 1  
QANTLA004AWZZ  
FM antenna x 1  
92LFANT1535A  
Special Note  
Supply of this product does not convey a license nor imply any right to distribute content created with this product in  
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-  
generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating content  
distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media  
(compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent  
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.  
“Made for iPod” means that an electronic accessory has  
been designed to connect specifically to iPod and has  
been certified by the developer to meet Apple  
performance standards.  
Apple is not responsible for the operation of this device  
or its compliance with safety and regulatory standards.  
Printed in Malaysia  
10B R MW 1  
TINSZA625AWZZ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System connections (continued)  
Make sure to unplug the AC power cord before making any connections.  
TV  
AM loop antenna  
To video  
input jack  
InstallingtheAM loop  
antenna  
< Assembling >  
Video cable  
(not supplied)  
subwoofer light-up wire  
subwoofer  
< Attaching to  
the wall >  
Cooling fan  
wall  
(not supplied)  
FM antenna  
screws  
Left  
speaker  
light-up  
wire  
Right speaker light-  
up wire  
Right speaker  
Left  
speaker  
Red  
Black  
AC outlet (AC 120 V ~ 60 Hz)  
Cooling fan :  
The main unit is built with a cooling fan at the rear of the unit for improved cooling. Please do not cover the opening of the  
fan with any obstacles, as this will block proper ventilation.  
Remote control  
Caution:  
Battery installation  
Replace all old batteries with new ones at the same  
time.  
Use 2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or  
Do not mix old and new batteries.  
similar). Batteries are not included.  
Remove the batteries if the unit will not be used for a  
long period of time. This will prevent potential damage  
due to battery leakage.  
Do not use rechargeable batteries (nickel-cadmium  
battery, etc.).  
Open the battery cover.  
1
2
Insert the batteries according to the direction indicated  
in the battery compartment.  
Installing the batteries incorrectly may cause the unit to  
malfunction.  
Batteries (battery pack or batteries installed) shall not  
be exposed to excessive heat such as sunshine, fire or  
the like.  
When inserting or removing the batteries, push them  
toward the (–) battery terminals.  
Close the cover.  
3
Notes concerning use:  
Replace the batteries if the operating distance is  
reduced or if the operation becomes erratic. Purchase  
2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or  
similar).  
Periodically clean the transmitter on the remote control  
and the sensor on the unit with a soft cloth.  
Exposing the sensor on the unit to strong light may  
interfere with operation. Change the lighting or the  
direction of the unit if this occurs.  
Keep the remote control away from moisture, heat,  
shock and vibrations.  
E-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General control  
Volume control  
Turn the volume knob toward VOL +/– (on main unit) or  
press VOLUME +/– (on remote control) to increase or  
decrease the volume.  
MINI COMPONENT SYSTEM  
CD-SW440  
POWER  
FUNCTION  
POWER  
ON/STAND-BY  
ON/STAND-BY  
X-Bass control  
VOL  
When the power is first turned on, the unit will enter the  
extra bass mode which emphasizes the bass frequencies,  
and “X-BASS” will appear. To cancel the extra bass mode,  
press the X-BASS button on the remote control.  
Bass control  
1
2
Press the BASS/TREBLE button to select “BASS”.  
Within 5 seconds, press the VOLUME (+ or –) button to  
adjust the bass.  
CD  
USB  
Treble control  
1
2
Press the BASS/TREBLE button to select “TREBLE”.  
Within 5 seconds, press the VOLUME (+ or –) button to  
adjust the treble.  
To turn the power on  
The first time the unit is plugged in, the unit will enter the  
demonstration mode. You will see words scroll and the  
subwoofer and front speaker will light up in flashing mode.  
Equalizer  
When the EQUALIZER MODE button is pressed, the  
current mode setting will be displayed. To change to a  
different mode, press the EQUALIZER MODE button  
repeatedly until the desired sound mode appears.  
1 Press the DEMO button to cancel the demonstration  
mode. The subwoofer and front speaker light up will be  
off.  
NNooeqeuqauliazalitzioanti.on.  
For game.  
FLAT  
2 Press the ON/STAND-BY button to turn the power on.  
For rock music.  
GAME  
CLASSIC  
POPS  
Function  
Main unit  
Remote  
control  
Operation  
For classical music.  
For classical music.  
For pop music.  
For pop music.  
Power on /  
off  
Press to turn the  
power on or to  
go to stand-by  
mode.  
POWER  
ON/STAND-BY  
Vocals are enhanced.  
Vocals are enhanced.  
VOCAL  
JAZZ  
For jazz.  
For jazz.  
____  
Demo on /  
off  
Press to enter to  
demonstration  
on or off mode.  
Auto power on function  
When you press any of these buttons during stand-by  
mode, the unit turns on.  
/
button on the main unit : The unit turns on and  
playback of the last function will start (iPod, CD,  
TUNER, USB, TAPE, AUDIO IN).  
Display brightness control  
To dim the display brightness, hold down the CLEAR/  
DIMMER button on the remote control for 2 seconds or  
more.  
iPod button on the remote control : The unit turns on  
and iPod function is activated.  
CD button on the remote control : The unit turns on and  
CD function is activated.  
TUNER button on the remote control : The unit turns on  
and TUNER function is activated.  
Volume auto fade-in  
If you turn off and on the main unit with the volume set to  
27 or higher, the volume starts at 16 and fades in to the last  
set level.  
USB button on the remote control : The unit turns on  
and USB function is activated.  
TAPE button on the remote control: The unit turns on  
and TAPE function is activated.  
AUDIO IN button on the remote control : The unit turns  
on and AUDIO IN function is activated.  
Subwoofer and front speaker light up  
control  
Auto power off function  
The subwoofer and front speaker will light up according to  
the level of the music source played back. To turn on/off the  
light, hold down the CLEAR/DIMMER button on the remote  
control for 2 seconds or more.  
In the stop mode of disc, USB or tape operation, the main  
unit enters the stand-by mode after 15 minutes of inactivity.  
E-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to the iPod  
Supported iPod models:  
iPod nano (software 1.2 above)  
iPod mini (software 1.2 above)  
MINI COMPONENT SYSTEM  
CD-SW440  
iPod (5th generation) (software 1.3 above) (Dock connector equipped  
Click Wheel model)  
POWER  
ON/STAND-BY  
FUNCTION  
POWER  
ON/STAND-BY  
iPod (4th generation) (software 3.0.2 above) (Dock connector  
equipped Click Wheel model)  
VOL  
iPod nano (2nd generation) (software 1.0.0 above)  
iPod nano (3rd generation) (software 1.0.3 above)  
iPod nano (4th generation) (software 1.0.3 above)  
iPod classic (software 1.0.3 above)  
iPod touch (software 1.1 above)  
iPod touch (2nd generation) (software 2.1 above)  
Caution:  
Please update your iPod unit to the latest software version from Apple’s  
homepage before using it.  
CD  
USB  
iPod adaptor connection  
Notes:  
iPhone is not supported by this system.  
You can use an audio cable to connect your iPod to the AUDIO IN  
jack if:  
TAPE  
1. your iPod adaptor does not fit into the iPod dock on the main unit.  
2. you have an iPod that does not have an iPod adaptor.  
3. you have an iPod that does not have an iPod 30 pin connector.  
To remove iPod adaptor  
To insert iPod adaptor  
Insert the tip of a screwdriver (“–” type, small) into the iPod adaptor hole  
as shown and lift upward to remove.  
1
2
Press the ON/STAND-BY button to turn the power on.  
Insert the iPod adaptor into the iPod dock and connect your iPod.  
iPod (bottom)  
iPod  
Dock connector  
To disconnect iPod  
Simply remove the iPod from the iPod dock. It is safe to do so even during  
playback.  
iPod adaptor  
(not supplied)  
Navigating the iPod menus  
iPod dock  
1
2
Press the MENU button to view the menu on iPod unit. Press it  
again to go back to previous menu.  
iPod connector  
Use the TUNING ( or  
) button on the remote control to select  
an item on the menu and then press ENTER button.  
Note:  
When navigating the iPod menus with remote control, do not operate any  
of the buttons on the iPod unit. The volume level is adjusted by pressing  
the VOL (+ or –) button on the main unit or the remote control. Adjusting  
the volume on the iPod unit gives no effect.  
iPod playback  
1
2
Press the ON/STAND-BY button to turn the power on.  
iPod operation:  
Press the iPod button on the remote control or FUNCTION button  
repeatedly on the main unit to select iPod function.  
The operations described below depend on the generation iPod you are  
using.  
3
4
Insert iPod unit in iPod dock of main unit.  
System on operation:  
Press the  
/
button to start playback.  
When the main unit is powered on, the iPod unit will automatically power  
on when docked in the unit (including TIMER function/exclude USB  
function).  
Notes:  
Once the iPod is connected to the unit it will begin charging.  
The iPod unit cannot be charged while the main unit is in the stand-  
by mode or during USB mode.  
Please make sure to set iPod unit to either NTSC or PAL to match  
your TV signal. Please visit Apple’s homepage for further information.  
System off (stand-by operation):  
When the main unit is turned to stand-by mode, the docked iPod unit will  
automatically turn to stand-by mode.  
E-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to the iPod (continued)  
Listening to a CD or MP3/WMA disc  
Watching videos on a TV connected to  
iPod  
MINI COMPONENT SYSTEM  
CD-SW440  
1
2
Press the DISPLAY (TV OUT) button for more than 2 seconds.  
“TV DISP” will appear on display.  
POWER  
ON/STAND-BY  
FUNCTION  
POWER  
ON/STAND-BY  
Press the ENTER button to start playback.  
VOL  
Notes:  
If the TV Out setting is already turned on at video menu, the  
video is automatically displayed on the TV screen when  
ENTER key is pressed.  
To return to watching video on iPod screen, press the MENU  
button to enter video menu. Then press the DISPLAY (TV  
OUT) button for more than  
appears.  
2
seconds until “iPodDISP”  
During iPod video playback, pressing the DISPLAY (TV OUT)  
button will not toggle video out display between iPod and TV.  
CD  
USB  
iPod playback detection function:  
Once the play button on the iPod unit is pressed, the main unit will  
automatically change to iPod function overriding the previous  
function selected.  
Caution:  
TAPE  
Unplug all accessories for the iPod before inserting it into the  
iPod dock.  
Stop button ( ) at main unit is invalid during iPod function.  
Various iPod functions  
Function  
Main  
unit  
Remote  
control  
Operation  
Disc playback  
Play  
Press in the pause mode.  
1
2
Press the ON/STAND-BY button to turn the power on.  
Press the CD button on the remote control or FUNCTION  
button repeatedly on the main unit to select CD function.  
Pause  
Press in the playback  
mode.  
3
4
5
6
Press the OPEN/CLOSE button to open the disc tray.  
Place the disc on the disc tray, label side up.  
____  
Track up/  
down  
Press in the playback or  
pause mode.  
Press the OPEN/CLOSE button to close the disc tray.  
If you press the button in  
the pause mode, press the  
Press the  
/
(CD  
/
) button to start playback. After the  
last track is played, the unit will stop automatically.  
/
button to start the  
desired track.  
Notes for CD or MP3/WMA disc:  
____  
____  
Fast  
Press and hold down in the  
playback mode.  
Release the button to  
resume playback.  
When the end of the last track is reached during fast forward,  
“END” will appear on the display and CD operation will be  
paused. When the beginning of the first track is reached  
during fast reverse, the unit will enter the playback mode (only  
for CD).  
Rewritable multi-session discs with unfinished writing, can  
still be played.  
forward/  
reverse  
Display  
iPod back light ON.  
Press for more than 2  
seconds to toggle the video  
out display between iPod or  
TV.  
Press to toggle repeat  
mode.  
Various disc functions  
Function  
Main  
unit  
Remote  
control  
Operation  
____  
____  
____  
____  
Repeat  
Shuffle  
Pause  
Press in the playback  
mode. Press the  
/
Press and hold down to  
toggle shuffle mode.  
button to resume playback  
from the paused point.  
iPod  
Menu  
Press to view the iPod  
menu during iPod function.  
Track up/  
down  
Press in the playback or  
stop mode.  
If you press the button in  
the stop mode, press the  
____  
____  
iPod  
Enter  
Press to confirm the  
selection.  
/
button to start the  
desired track.  
Press and hold down in the  
playback mode.  
____  
iPod  
Cursor  
Up/Down  
Press to select the iPod  
menu.  
Fast  
forward/  
reverse  
Release the button to  
resume playback.  
E-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to a CD or MP3/WMA disc (continued)  
Direct track search  
Random play  
By using the Direct Search buttons, the desired tracks on  
the current disc can be played.  
The tracks on the disc can be played in random order  
automatically.  
Use the Direct Search buttons on the remote control to  
select the desired track while playing the selected  
disc.  
The Direct Search buttons allow you to select up to  
number 9.  
To random play all tracks:  
Press and hold down PLAY MODE button on the remote  
control until “RANDOM” appears. Press the  
button.  
/
(CD / )  
To cancel random play:  
When selecting number 10 or higher, use the “10+”  
Press and hold the PLAY MODE button until “NORMAL”  
appears and “R” disappears.  
button.  
A. For example, to choose 13  
1
2
3
Press the “10+” button once.  
Press the “1” button.  
Selected track number  
Press the “3” button.  
Notes:  
If you press the  
B. For example, to choose 130  
button during random play, you can  
move to the track selected next by the random  
operation. On the other hand, the button does not allow  
you to move to the previous track. The beginning of the  
track being played will be located.  
In random play, the unit will select and play tracks  
automatically. (You cannot select the order of the  
tracks.)  
1
2
3
4
Press the “10+” button twice.  
Press the “1” button.  
Press the “3” button.  
Press the “0” button.  
Notes:  
Caution:  
A track number higher than the number of tracks on the  
disc cannot be selected.  
During random play, direct search is not possible.  
After performing repeat play, be sure to press the (CD  
button. Otherwise, the disc will play continuously.  
)
To stop playback:  
Press the (CD ) button.  
Programmed play (CD)  
1
2
While in the stop mode, press the MEMORY button on  
the remote control to enter the programing save mode.  
Repeat play  
Repeat play can play one track, all tracks or a programmed  
sequence continuously.  
To repeat one track:  
Press the PLAY MODE button repeatedly until “1-  
REPEAT” appears. Press the  
Press the  
or  
buttons on the remote control to  
/
(CD / ) button.  
select the desired track.  
To repeat all tracks:  
Press the PLAY MODE button repeatedly until “ALL  
REPEAT” appears. Press the  
/
(CD / ) button.  
Selected track number  
To repeat desired tracks:  
Perform steps 1 - 5 in “Programmed play” section on pages  
6 - 7 and then press the PLAY MODE button repeatedly  
until “ALL REPEAT” appears.  
3
4
Press the MEMORY button to save the track number.  
To cancel repeat play:  
Press the PLAY MODE button repeatedly until “NORMAL”  
appears and “  
” disappears.  
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can  
be programmed. If you want to check the programmed  
tracks, press the MEMORY button repeatedly. If you  
make  
a
mistake, the programmed tracks can be  
cleared by pressing the CLEAR/DIMMER button.  
5
Press the (CD / ) button to start playback.  
/
E-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to a CD or MP3/WMA disc (continued)  
Programmed play (MP3/WMA)  
Procedure to playback MP3/WMA disc  
with folder mode on  
1
2
While in the stop mode, press the MEMORY button to  
enter the programing save mode.  
To play back CD-R/RW.  
1
Press the CD button, and load an MP3/WMA disc.  
After disc is loaded, disc info will be displayed.  
MP3 indicator  
Press the TUNING ( or ) button on the remote  
control to select the desired folder.  
WMA indicator  
Disc  
Name  
TOTAL indicator  
Total number of  
files  
Total number  
of folder  
Then press the  
or  
button on the remote  
control to select the desired tracks.  
2
Press the FOLDER button, and press the TUNING (  
or button on the remote control to select desired  
)
playback folder. (Folder mode on)  
FOLDER  
indicator  
3
4
5
Press the MEMORY button to save the folder and  
track number.  
First track  
number in the  
folder  
FOLDER  
number  
Repeat steps 2 – 3 for other folder/tracks. Up to 32  
tracks can be programmed.  
3
4
Select desired file to be played back by pressing the  
Press the  
/
(CD / ) button to start playback.  
or  
button.  
To cancel the programmed play mode:  
During programmed stop mode, press the  
button. The display will show “MEM CLEAR” and all the  
programmed contents will be cleared.  
Press the  
file name will be displayed.  
/
(CD / ) button. Playback will start and  
(CD  
)
Title, Artist and Album name are displayed if they  
are recorded on the disc.  
Adding tracks to the program:  
In case of playback with the folder mode on, press  
the TUNING ( or ) button on the remote control,  
and the folder can be selected even though it is in  
playback/pause mode. It will continue playback/  
pause mode in the 1st track of the selected folder.  
If a program has been previously stored, the “MEMORY”  
indicator will be displayed. Then follow steps 1 - 3 to add  
tracks. The new tracks will be stored after the last track of  
the previous program.  
Notes:  
Display content can be changed by pressing the  
DISPLAY button.  
When a disc is ejected, the program is automatically  
canceled.  
File name display  
If you press the ON/STAND-BY button to enter the  
stand-by mode or change the function from CD to  
another, the programmed selections will be cleared.  
During the program operation, random play is not  
possible.  
Album display  
Title display  
Artist display  
Note:  
If “NO SUPPORT” is displayed, it means “Copyright  
protected WMA file” or “Not supported playback file” is  
selected.  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to USB mass storage device/MP3 player  
4
Press the  
name will be displayed.  
/
(USB  
/
) button. Playback will start and the file  
FUNCTION  
POWER  
ON/STAND-BY  
VOL  
Title, Artist and Album name are displayed if they are recorded  
in the USB memory device.  
Display content can be changed by pressing the DISPLAY  
button.  
PUSH  
OPEN  
AUDIO IN  
PHONES  
To remove USB memory device  
1
2
Press the  
(USB ) button to stop playback.  
Disconnect USB memory device from the USB terminal.  
Notes:  
SHARP will not be held liable for the loss of data while the USB  
CD  
USB  
memory device is connected to the audio system.  
This USB memory’s format supports FAT 16 or FAT 32.  
SHARP cannot guarantee that all USB memory devices will work on  
this audio system.  
USB cable is not recommended for use in this audio system to  
connect to USB memory device. Use of the USB cable will affect the  
performance of this audio system.  
TAPE  
This USB memory cannot be operated via USB hub or external HDD-  
storage.  
The USB terminal in this unit is not intended for a PC connection but  
is used for music streaming with a USB memory device.  
If unplayable file is played on this product, “NO SUPPORT” is  
indicated.  
This product relates to USB mass storage devices and MP3 players.  
It may however face some irregularities due to various unforeseen  
reasons from some devices. Should this happen, turn off the unit and  
then turn it on again.  
The USB port is only intended for direct connection to a USB memory  
device without any cable.  
Playback order for MP3 files may differ depending on the writing  
software used during file download.  
Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160  
Note:  
This USB mass storage device or MP3 player is not compatible with MTP  
and AAC file systems.  
To playback USB/MP3 player with folder  
mode off  
1
Press the USB button on the remote control or FUNCTION button  
repeatedly on main unit to select USB function. Connect the USB  
memory device that has MP3/WMA format files on the unit. When the  
USB memory is connected to the main unit, the device information  
will be displayed.  
2
3
Select desired file to be played back by pressing the  
button.  
or  
kbps.  
Playlists are not supported on this unit.  
This unit can display Folder Name or File Name up to 32 characters.  
Folders with non playable files are also counted.  
The display playback time may not be displayed correctly when  
playing back a variable bitrate file.  
The ID3TAG information supported are TITLE, ARTIST and ALBUM  
only. Title name, artist name and album name can be displayed by  
pressing the DISPLAY button during file playback or pause mode.  
Press the  
name will be displayed.  
/
(USB  
/
) button. Playback will start and the file  
Title, Artist and Album name are displayed if they are recorded  
in the USB memory device.  
Display content can be changed by pressing the DISPLAY  
button.  
Note:  
To pause playback:  
Press the (USB  
WMA meta tag also supports title, artist and album name which are  
recorded in WMA files. Copyright protected WMA files cannot be  
played back.  
/
/
) button.  
To playback USB/MP3 player with folder  
mode on  
The following functions are the same as CD operations:  
Page  
1
2
3
Press the USB button on the remote control or FUNCTION button  
repeatedly on main unit to select USB function. Connect the USB  
memory device that has MP3/WMA format files on the unit. When the  
USB memory is connected to the main unit, the device information  
will be displayed.  
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Press the FOLDER button, and press the TUNING ( or ) button  
on the remote control to select desired playback folder. To start  
playback with folder mode on, go to step 4. To change the playback  
Note:  
If USB memory device is not connected, “NO MEDIA” will be shown on  
the display.  
folder, press the TUNING ( or  
select another folder.  
) button on the remote control to  
Select desired file to be played back by pressing the  
button.  
or  
E-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to the radio  
Presetting a station  
You can store 40 AM and FM stations in memory and recall  
them at the push of a button. (Preset tuning)  
MINI COMPONENT SYSTEM  
CD-SW440  
POWER  
ON/STAND-BY  
FUNCTION  
POWER  
ON/STAND-BY  
1
2
Perform steps 1 - 3 in “Tuning”.  
VOL  
Press the MEMORY button.  
3
4
Within 30 seconds, press the PRESET ( or ) button  
to select the preset channel number. Store the stations  
in memory, in order, starting with preset channel 1.  
CD  
USB  
Within 30 seconds, press the MEMORY button to store  
that station in memory. If the “MEMORY” and preset  
number indicators disappear before the station is  
memorized, repeat the operation from step 2.  
5
Repeat steps 1 - 4 to set other stations, or to change a  
preset station. When a new station is stored in the  
memory, the station previously memorized for that  
preset channel number will be erased.  
TAPE  
Note:  
The backup function protects the memorized stations for a  
few hours should there be a power failure or the AC power  
cord become disconnected.  
Tuning  
1
2
Press the ON/STAND-BY button to turn the power on.  
Press the FUNCTION button on the main unit or  
TUNER (BAND) button on the remote control  
repeatedly to select the desired frequency band (FM  
stereo, FM mono or AM).  
To recall a preset station  
Press the PRESET ( or  
) button for less than 0.5  
seconds to select the desired station.  
3
Press the TUNING ( or ) button to tune in to the  
desired station.  
To scan the preset stations  
The stations saved in the memory can be scanned  
automatically. (Preset memory scan)  
Manual tuning:  
Press the TUNING ( or ) button repeatedly to tune  
in to the desired station.  
1
Press the PRESET ( or ) button for more than 0.5  
seconds. The preset number will flash and the  
programmed stations will be tuned in sequentially, for 5  
seconds each.  
Auto tuning:  
When the TUNING ( or ) button is pressed for more  
than 0.5 seconds, scanning will start automatically and  
the tuner will stop at the first receivable broadcast  
station.  
2
Press the PRESET ( or ) button again when the  
desired station is located.  
Notes:  
When radio interference occurs, auto scan tuning may  
stop automatically at that point.  
Auto scan tuning will skip weak signal stations.  
To erase entire preset memory  
1
2
Press the ON/STAND-BY button to enter the stand-by  
mode.  
To stop the auto tuning, press the TUNING ( or  
)
button again.  
While pressing down the FUNCTION button, press the  
POWER ON/STAND-BY button until “TUNER CLEAR”  
appears.  
To receive an FM stereo transmission:  
Press the FUNCTION button on main unit or TUNER  
(BAND) button on remote control repeatedly to select  
stereo mode and “ST” indicator will be displayed. “  
will appear when an FM broadcast is in stereo.  
If the FM reception is weak, press the TUNER (BAND)  
button to extinguish the “ST” indicator. The reception  
changes to monaural, and the sound becomes clearer.  
POWER  
ON/STAND-BY  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to a cassette tape  
Note:  
Various tape functions  
Tape recording function is not available in this unit.  
Function  
Main  
unit  
Remote  
control  
Operation  
Before playback:  
For playback, use normal or low-noise  
tapes for the best sound. (Metal or  
Tape  
Press in the stop  
mode.  
playback  
Stop  
CrO tapes are not recommended.)  
2
Do not use C-120 tapes or poor-quality  
tapes, as they may cause malfunctions.  
Press in the  
playback, fast  
forward or fast  
rewind mode.  
Before loading a tape into the cassette  
compartment, tighten the slack with a pen  
or a pencil.  
Fast  
forward/  
Fast rewind  
____  
Press in the  
playback or stop  
mode.  
MINI COMPONENT SYSTEM  
CD-SW440  
POWER  
FUNCTION  
POWER  
ON/STAND-BY  
ON/STAND-BY  
Caution:  
VOL  
To remove the cassette, press the (TAPE ) button,  
and then open the compartment.  
PUSH  
OPEN  
If a power failure occurs during tape operation, the tape  
head will remain engaged with the tape and the  
cassette door will not open. In this case, wait until the  
power is restored.  
CD  
USB  
TAPE  
TAPE  
Tape playback  
1
Press the ON/STAND-BY button to turn the power on.  
2
Press the FUNCTION button on main unit repeatedly  
or TAPE button on remote control to select TAPE  
function.  
V
O
L
V
O
L
3
Open the cassette door  
by pushing the area  
IN  
A
U
D
IO  
H
N
P
O
U
S
P
E
P
H
O
N
E
S
marked “ PUSH OPEN”.  
PUSH  
OPEN  
4
5
Load a cassette into the  
cassette compartment.  
T
E
M
Y
S
T
S
E
N
P
O
N
CD-  
O
M
440  
I
C
SW  
M
I
N
N
P
N
/
O
W
E
R
T
A
N
O
S
D
-B  
Y
P
L
E
IN  
A
U
D
IO  
P
H
O
N
E
S
Press the  
/
(TAPE ) button to start playback.  
Download from Www.Somanuals.Eco-m1.0All Manuals Search And Download.  
Setting the clock (Remote control  
only)  
Timer and sleep operation (Remote  
control only)  
Once timer:  
Once timer play works for one time only at a preset time.  
Daily timer:  
Daily timer play works at the same preset time every day.  
For example, set the timer as a wake-up call every  
morning.  
CD  
USB  
Using the once timer and daily timer in combination:  
For example, use the once timer to listen a radio program,  
and use the daily timer to wake up.  
TAPE  
1 minute or more  
In this example, the clock is set for the 12-hour (AM 12:00)  
display.  
Once timer  
Stop  
Daily timer  
Stop  
Start  
Start  
1
2
3
Press the ON/STAND-BY button to turn the power on.  
Press the CLOCK/TIMER button.  
Within 10 seconds, press the MEMORY button.  
Timer playback  
Press the  
or  
button to select 12-hour or  
24-hour display and then press the MEMORY button.  
Before setting timer:  
The 12-hour display will appear.  
(AM 12:00 - PM 11:59)  
The 12-hour display will appear.  
(AM 0:00 - PM 11:59)  
Check that the clock is set to the correct time (refer to  
page 11). If it is not set, you cannot use the timer  
function.  
“AM 12:00”  
“AM 0:00”  
For timer playback: Plug in USB or load disc/cassette  
or dock iPod to be played.  
The 24-hour display will appear.  
“0:00”  
(0:00 - 23:59)  
4
5
To adjust the hour, press the  
then press the MEMORY button. Press the  
button once to advance the time by 1 hour. Hold it  
down to advance continuously.  
or  
button and  
or  
1
Press the ON/STAND-BY button to turn the power on.  
Press and hold the CLOCK/TIMER button.  
2
3
Within 10 seconds, press the  
or  
button to  
To adjust the minutes, press the  
and then press the MEMORY button. Press the  
or button once to advance the time by 1 minute.  
or  
button  
select “ONCE SET” or “DAILY SET”, and press the  
MEMORY button. Set the clock to the correct time if  
“ONCE SET” or “DAILY SET” does not appear.  
To confirm the time display:  
4
5
6
Within 10 seconds, press the  
select “TIMER SET”, and press the MEMORY button.  
or  
button to  
Press the CLOCK/TIMER button. The time display will  
appear for about 5 seconds.  
Note:  
To adjust the hour, press the  
press the MEMORY button.  
or  
button and then  
or button and  
The “CLOCK” will appear or time will be displayed when  
the AC power supply is restored after a power failure or  
unplugging the unit. If incorrect, readjust the clock as  
follows.  
To adjust the minutes, press the  
then press the MEMORY button.  
To readjust the clock:  
7
Set the time to finish as in steps 5 and 6 above.  
Perform “Setting the clock” from step 1. If the “CLOCK”  
does not appear in step 2, step 3 (for selecting the 12-hour  
or 24-hour display) will be skipped.  
8
To select the timer playback source (CD, TUNER, USB,  
iPod, TAPE or AUDIO IN), press the  
Press the MEMORY button.  
or  
button.  
To change the 12-hour or 24-hour display:  
When you select the tuner, select a station by pressing  
the or button, and then press the MEMORY  
button. If a station has not been programmed, “NO  
PRESET” will be displayed and timer setting will be  
canceled.  
1
Clear all the programmed contents. [Refer to “Factory  
reset, clearing all memory” on page 14 for details.]  
2
Perform “Setting the clock” from step 1 onwards.  
9
Adjust the volume using the VOLUME control, and then  
press the MEMORY button. Do not turn the volume up  
too high.  
10 Press the ON/STAND-BY button to enter the power  
stand-by mode. The “TIMER” indicator lights up and  
the unit is ready for timer playback.  
Download from Www.Somanuals.Eco-m1.1All Manuals Search And Download.  
Timer and sleep operation (Remote control only) (continued)  
Reusing the memorized timer setting:  
The timer setting will be memorized once it is entered. To  
reuse the same setting, perform the following operations.  
MINI COMPONENT SYSTEM  
CD-SW440  
1
2
Turn the power on and press and hold down the  
CLOCK/TIMER button.  
FUNCTION  
POWER  
ON/STAND-BY  
Within 10 seconds, press the  
or  
button to  
VOL  
select “ONCE SET” or “DAILY SET”, and press the  
MEMORY button.  
PUSH  
OPEN  
3
4
Within 10 seconds, press the  
select “TIMER ON”, and press the MEMORY button.  
or  
button to  
11 When the preset time is reached, playback will start.  
The volume will increase gradually until it reaches the  
preset volume. The “ ” indicator will blink during timer  
playback.  
Press the ON/STAND-BY button to enter the power  
stand-by mode.  
The “DAILY” indicator will blink during timer playback.  
Sleep operation  
The radio, compact disc, iPod and USB can all be turned  
off automatically.  
12 When the timer end time is reached, the system will  
enter the power stand-by mode automatically.  
Once timer:  
The timer will be canceled.  
1
2
3
Play back the desired sound source.  
Press the SLEEP button.  
Daily timer:  
The timer operates at the same time every day. It will  
continue until the daily timer setting is canceled. Cancel  
the daily timer when it is not in use.  
Within 10 seconds, press the SLEEP button repeatedly  
to select the time.  
10  
20  
30 ....... 80  
90  
4
5
“SLEEP” will appear.  
Notes:  
The unit will enter the power stand-by mode  
automatically after the preset time has elapsed. The  
volume will be turned down 1 minute before the sleep  
operation finishes.  
When performing timer playback using another unit  
connected to the USB terminal or AUDIO IN jack, select  
“USB” or “AUDIO IN” in step 8.  
This unit will turn on or enter the power stand-by mode  
automatically. However, the connected unit will not turn  
on or off. To stop the timer playback, follow step  
“Canceling the timer settingof this page.  
To confirm the remaining sleep time:  
While “SLEEP” is indicated, press the SLEEP button.  
1
Checking the timer setting:  
To cancel the sleep operation:  
Press the ON/STAND-BY button while “SLEEP” is  
indicated. To cancel the sleep operation without setting the  
unit to the stand-by mode, proceed as follows.  
1
Turn the power on and press and hold down the  
CLOCK/TIMER button.  
2
Within 10 seconds, press the  
or  
button to  
select “ONCE SET” or “DAILY SET”, and press the  
MEMORY button.  
1
2
While “SLEEP” is indicated, press the SLEEP button.  
Within 10 seconds, press the SLEEP button repeatedly  
to select “SLEEP 00”.  
3
Within 10 seconds, press the  
or  
button to  
select “TIMER CALL, and press the MEMORY button.  
To use timer and sleep operation together  
Canceling the timer setting:  
Sleep and timer playback:  
For example, you can fall asleep listening to the radio and  
wake up to CD in the next morning.  
1
Turn the power on and press and hold down the  
CLOCK/TIMER button.  
2
Within 10 seconds, press the  
or  
button to  
select “ONCE SET” or “DAILY SET”, and press the  
MEMORY button.  
1
2
Set the sleep time (see above, steps 1 - 5).  
While the sleep timer is set, set the timer playback  
(steps 2 - 9, page 11).  
3
Within 10 seconds, press the  
or  
button to  
select “TIMER OFF”, and press the MEMORY button.  
Timer will be canceled (the setting will not be  
canceled).  
Sleep timer  
setting  
Timer playback  
setting  
End  
time  
Desired time  
90 minutes  
Sleep operation will  
automatically stop  
Timer playback  
start time  
Download from Www.Somanuals.Eco-m1.2All Manuals Search And Download.  
Enhancing your system  
Troubleshooting chart  
The connection cord is not included. Purchase  
commercially available cord as shown below.  
a
Many potential problems can be resolved by the owner  
without calling a service technician.  
If something is wrong with this product, check the following  
before calling your authorized SHARP dealer or service  
center.  
Portable audio  
player, etc.  
General  
Audio cable  
Symptom  
Possible cause  
(not supplied)  
The clock is not set Did a power failure occur?  
to the correct time.  
Reset the clock. (Refer page  
11)  
MINI COMPONENT SYSTEM  
CD-SW440  
AUDIO IN  
When a button is  
pressed, the unit  
does not respond.  
Set the unit to the power  
stand-by mode and then turn  
it back on.  
If the unit still malfunctions,  
reset it. (Refer page 14)  
FUNCTION  
POWER  
ON/STAND-BY  
PHONES  
VOL  
PUSH  
OPEN  
AUDIO IN  
No sound is heard. Is the volume level set to  
PHONES  
“0”?  
Are the headphones  
connected?  
Are the speaker wires  
disconnected?  
Listening to the playback sounds of  
portable audio player, etc.  
CD player  
Symptom  
Possible cause  
1
Use a connection cord to connect the portable audio  
Playback does not Is the disc loaded upside  
start.  
Playback stops in  
the middle or is not  
player etc. to the AUDIO IN jack. When using video  
equipment, connect the audio output to this unit and  
the video output to a television.  
down?  
Does the disc satisfy the  
standards?  
performed properly. Is the disc distorted or  
2
3
Press the ON/STAND-BY button to turn the power on.  
scratched?  
Press the AUDIO IN button on the remote control or  
FUNCTION button repeatedly on main unit to select  
AUDIO IN function.  
Playback sounds  
are skipped, or  
stopped in the  
Is the unit located near  
excessive vibrations?  
Is the disc very dirty?  
Has condensation formed  
inside the unit?  
middle of a track.  
4
Play the connected equipment. If volume level of the  
connected device is too high, sound distortion may  
occur. Should this happen, lower the volume of the  
connected device. If volume level is too low, increase  
the volume of the connected device.  
Remote control  
Symptom  
Possible cause  
Note:  
The remote control Is the AC power cord of the  
To prevent noise interference, place the unit away from the  
television.  
does not operate.  
unit plugged in?  
Is the battery polarity  
correct?  
Are the batteries dead?  
Is the distance or angle  
incorrect?  
Does the remote control  
sensor receive strong light?  
Headphones  
Do not turn the volume on to full at switch on and listen  
to music at moderate levels. Excessive sound pressure  
from earphones and headphones can cause hearing  
loss.  
Before plugging in or unplugging the headphones,  
reduce the volume.  
Cassette deck  
Be sure your headphones have a 1/8" (3.5 mm)  
diameter plug and impedance between 16 and 50  
ohms. The recommended impedance is 32 ohms.  
Plugging in the headphones disconnects the speakers  
automatically. Adjust the volume using the VOLUME  
control.  
Symptom  
Possible cause  
Sound skipping.  
Is there any slack?  
Cannot hear treble. Is the tape stretched?  
Sound Fluctuation. Are the capstans, pinch  
rollers or heads dirty?  
Cannot remove the If a power failure occurs  
tape.  
during playback, the heads  
remain engaged with the  
tape. Do not open the  
compartment with great  
force.  
Download from Www.Somanuals.Eco-m1.3All Manuals Search And Download.  
Troubleshooting chart (continued)  
USB  
If problem occurs  
When this product is subjected to strong external interference  
(mechanical shock, excessive static electricity, abnormal supply voltage  
due to lightning, etc.) or if it is operated incorrectly, it may malfunction.  
Symptom  
Possible cause  
Device cannot be  
detected.  
Is there any MP3/WMA file  
available?  
Is the device properly connected?  
Is it an MTP device?  
Does the device contain AAC file  
only?  
If such a problem occurs, do the following:  
1
2
Set the unit to the stand-by mode and turn the power on again.  
If the unit is not restored in the previous operation, unplug and plug  
in the unit again, and then turn the power on.  
Playback does not start.  
Is it a copyright protected WMA  
file?  
Is it a false MP3 file?  
Note:  
If neither operation above restores the unit, clear all the memory by  
resetting it.  
Wrong time display.  
Wrong file name display.  
Is Variable Bitrate file being played  
back?  
Is the File Name written in  
Chinese or Japanese characters?  
Factory reset, clearing all memory  
iPod  
1
2
Press the ON/STAND-BY button to enter the power stand-by mode.  
While pressing down the OPEN/CLOSE button, press the POWER  
ON/STAND-BY button until “ALL CLEAR” appears.  
Symptom  
Possible cause  
No sound is produced.  
No image appears on the  
TV/monitor.  
The iPod is not playing.  
The iPod is not properly  
connected to the unit.  
Is the AC power cord of the unit  
plugged in?  
The video cable is not properly  
connected.  
POWER  
ON/STAND-BY  
Caution:  
This operation will erase all data stored in memory including clock, timer  
settings, tuner preset, and CD program.  
The TV/monitor’s input selection is  
not properly set.  
iPod will not charge.  
Wrong iPod adaptor is used.  
The iPod is not making full contact  
with the iPod connector.  
The main unit is in stand-by mode.  
Using 3rd generation iPod.  
Care of compact discs  
Compact discs are fairly resistant to damage, however mistracking can  
occur due to an accumulation of dirt on the disc surface. Follow the  
guidelines below for maximum enjoyment from your CD collection and  
player.  
Do not write on either side of the disc, particularly the non-label side  
from which signals are read. Do not mark this surface.  
Keep your discs away from direct sunlight, heat and excessive  
moisture.  
Always hold the CDs by the edges. Fingerprints, dirt or water on the  
CDs can cause noise or mistracking. If a CD is dirty or does not play  
properly, clean it with a soft, dry cloth, wiping straight out from the  
center, along the radius.  
Tuner  
Symptom  
Possible cause  
The radio makes unusual  
noises continuously.  
Is the unit placed near the TV or  
computer?  
Is the FM antenna or AM loop  
antenna placed properly? Move the  
antenna away from the AC power  
cord if it is located nearby.  
Maintenance  
Condensation  
Cleaning the CD pickup lens  
Sudden temperature changes, storage or operation in an extremely  
humid environment may cause condensation inside the cabinet (CD  
pickup, etc.) or on the transmitter on the remote control. Condensation  
can cause the unit to malfunction. If this happens, leave the power on with  
no disc in the unit until normal playback is possible (about 1 hour). Wipe  
off any condensation on the transmitter with a soft cloth before operating  
the unit.  
In order to ensure proper operation of the CD player, preventative  
maintenance (cleaning of the laser pickup lens) should be performed  
periodically. Lens cleaners are commercially available. Contact your local  
CD software dealer for options.  
Cleaning the cabinet  
Before transporting the unit  
Periodically wipe the cabinet with a soft cloth and a diluted soap solution,  
then with a dry cloth.  
Remove the iPod, USB memory device and disc from the unit. Then, set  
the unit to the power stand-by mode. Carrying the unit with iPod or USB  
memory device left docked or discs left inside can damage the unit.  
Caution:  
Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It  
may damage the cabinet.  
Do not apply oil to the inside of the unit. It may cause malfunctions.  
Download from Www.Somanuals.Eco-m1.4All Manuals Search And Download.  
Specifications  
As part of our policy of continuous improvement, SHARP  
reserves the right to make design and specification  
changes for product improvement without prior notice. The  
performance specification figures indicated are nominal  
values of production units. There may be some deviations  
from these values in individual units.  
USB  
USB host interface Complies with USB 1.1 (Full  
Speed)/ 2.0 Mass Storage  
Class.  
Support Bulk only and CBI  
protocol.  
General  
Support file  
Bitrate support  
Other  
MPEG 1 Layer 3  
Power source  
AC 120 V ~ 60 Hz  
102 W  
WMA (Non DRM)  
MP3 (32 ~ 320 kbps)  
WMA (64 ~ 160 kbps)  
Power  
consumption  
Dimensions  
Width: 9 - 7/16" (240 mm)  
Height: 12 - 7/16" (315.5 mm)  
Depth: 11 - 5/32" (283.2 mm)  
Maximum total number of  
MP3/WMA files is 1024.  
Maximum total number of  
folders is 255 INCLUSIVE of  
root directory.  
Weight  
13.9 lbs. (6.3 kg)  
The  
ID3TAG  
information  
Amplifier  
supported are TITLE, ARTIST  
and ALBUM only.  
Supports ID3TAG version  
Output power  
Front Speakers  
RMS: Total 200 watts  
1
(100 watts per channel into 4  
ohms at 1 kHz, 10% total  
harmonic distortion)  
and version 2.  
File system  
support  
Support USB devices with  
Microsoft Windows/DOS/FAT  
12/ FAT 16/ FAT 32.  
FTC: 75 watts minimum RMS per  
channel into 4 ohms from 100  
Hz to 20 kHz, 10% total  
harmonic distortion.  
2 kbyte block length for sector.  
Subwoofer  
RMS: 150 watts into 8 ohms at 70  
Hz, 10% total harmonic  
distortion  
FTC: 130 watts RMS into 8 ohms  
from 50 Hz to 120 Hz, 10%  
total harmonic distortion.  
Tuner  
Frequency range  
FM: 87.5 - 108 MHz  
AM: 530 - 1,720 kHz  
Output terminals Speakers: 4 ohms  
Headphones: 16 - 50 ohms  
Speaker  
Front Speaker  
Type  
(recommended: 32 ohms)  
2-way type speaker system  
2" (5 cm) tweeter  
5-1/8" (13 cm) woofer  
Video output : 1Vp-p  
Input terminals  
Audio In (audio signal):  
250 mV/47 k ohms  
Maximum input  
power  
200 W  
CD player  
Type  
Rated input power 100 W  
Impedance  
Dimensions  
4 ohms  
Single disc multi-play compact disc  
player  
Width: 7-1/16" (180 mm)  
Height: 11-13/16" (300 mm)  
Depth: 8" (204 mm)  
Signal readout  
Non-contact, 3-beam  
semiconductor laser pickup  
Weight  
Subwoofer  
Type  
6.0 lbs. (2.7 kg)/each  
D/A converter  
Multi bit D/A converter  
20 - 20,000 Hz  
Frequency  
response  
Subwoofer system  
8" (16 cm) woofer  
Dynamic range  
90 dB (1 kHz)  
Maximum input  
power  
300 W  
Cassette deck  
Rated input power 150 W  
Impedance  
Dimensions  
8 ohms  
Frequency  
response  
50 - 14,000 Hz (normal tape)  
50 dB (playback)  
Width: 9-1/16" (230 mm)  
Height: 11-13/16" (300 mm)  
Depth: 12" (305 mm)  
Signal/noise  
ratio  
Weight  
9.7 lbs. (4.4 kg)  
Wow and flutter 0.35% (WRMS)  
Download from Www.Somanuals.Eco-m1.5All Manuals Search And Download.  

Shindaiwa Trimmer 81646 User Manual
Solid State Logic Network Card X Logic Series User Manual
Sonance Indoor Furnishings Acoustic Damping Material User Manual
SonicWALL Home Security System TZ 170 SP User Manual
Sony Cassette Player TC TX373 User Manual
Sony Cassette Player WM FX177 User Manual
Sony Film Camera HXC 100 User Manual
Sony Microcassette Recorder ICD B310F User Manual
StarTechcom Power Supply ATX2POWER350 User Manual
Sylvania TV DVD Combo CT202SL8 User Manual