Disposal of Old Electrical & Electronic
Equipment
(Applicable in the European Union and
other European countries with separate
collection systems)
Basic Operations
2-899-568-13(1)
Adjusting the sound
Listening to the radio
is symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. e recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Micro HI-FI
1
Select “FM”or “AM.”
Press TUNER/BAND
To adjust the volume
repeatedly.
Press VOLUME +/ on the remote (or turn the
Component System
Operating Instructions
VOLUME control on the unit)
.
2
Select the tuning mode.
Press TUNING MODE
appears.
repeatedly until “AUTO”
To add a sound effect
To
Generate a more dynamic
sound (Dynamic Sound
Generator X-tra)
GB
Press
DSGX
3
Tune in the desired station.
on the unit.
Press +/ on the remote (or TUNING + or on the
unit) . Scanning stops automatically when a station
is tuned in, and then “TUNED” and “STEREO” (for
stereo programs only) appear.
.
Set the sound effect
EQ
Applicable accessories: Remote commander
Playing a CD/MP3 disc
Note on DualDiscs
To stop automatic scanning
1
Select the CD function.
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
Press (stop)
.
Press CD on the remote (or FUNCTION on the
.
remote repeatedly)
To tune in a station with a weak signal
If “TUNED” does not appear and the scanning does
CMT-GS10
© 2007 Sony Corporation Printed in China
2
Place a disc.
Press (open/close)
with the label side up on the disc tray.
not stop, press TUNING MODE
repeatedly until
on the unit, and place a disc
“MANUAL” appears and press +/ on the remote (or
TUNING + or on the unit)
the desired station.
repeatedly to tune in
Music discs encoded with copyright
Except for customers in the U.S.A.
and Canada
protection technologies
To reduce static noise on a weak FM stereo
station
WARNING
is product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
Press FM MODE
on the remote repeatedly until
is appliance is classified
as a CLASS 1 LASER
product. is marking
is located on the rear
exterior.
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
“MONO” appears to turn off stereo reception.
To close the disc tray, press (open/close)
unit.
Do not force the disc tray closed with your finger, as
this may damage the unit.
on the
To reduce the risk of fire, do not cover the ventilation of
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
Changing the display
Notice for the customer in the
To
Press
countries applying EU Directives
e manufacturer of this product is Sony Corporation,
1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. e
Authorized Representative for EMC and product safety is
Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Germany. For any service or guarantee matters
please refer to the addresses given in separate service or
guarantee documents.
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and omson.
Change
DISPLAY
repeatedly when the
when the system is
To reduce the risk of fire or electric shock, do not place
objects filled with liquids, such as vases, on the apparatus.
3
Start playback.
information on the system is on.
Press (play) (or CD (play/pause) on the unit)
display1)
.
Connect the unit to an easily accessible AC outlet. Should
you notice an abnormality in the unit, disconnect the
main plug from the AC outlet immediately.
Check the clock
when the system
is off
DISPLAY
off2). e clock is displayed for 8
seconds.
To
Press
Pause playback
(pause) on the remote (or CD
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
on the unit) . To resume
1)For example, you can view CD/MP3 disc information, such as the
track or file number or folder name during normal play, or the total
play, press the button again.
playing time while the player is stopped.
e STANDBY indicator
turned off.
Do not expose the battery to excessive heat such as direct
sunlight, fire or the like.
Stop playback
(stop)
.
.
2)
on the unit lights up when the system is
Select a folder on an
MP3 disc
+/
Notes on the display information
e following are not displayed:
CAUTION
Select a track or file
/
(go back/go forward)
Before using the system
e use of optical instruments with this product will
increase eye hazard.
on the remote (
/
on the
total playing time for a CD-DA disc depending on the play mode.
total playing time for an MP3 disc.
remaining playing time for a track and an MP3 file.
e following are not displayed correctly:
elapsed playing time of an MP3 file encoded using a VBR (variable
bit rate).
folder and file names that do not follow either the ISO9660
Level 1, Level 2 or Joliet in the expansion format.
e following are displayed:
unit)
.
To use the remote
Find a point in a
track or file
Hold down
/
(rewind/
Slide and remove the battery compartment lid , and
insert the two R6 (size AA) batteries (supplied), side
first, matching the polarities shown below.
fast forward)
during playback,
and release the button at the
desired point.
Select Repeat Play
REPEAT
repeatedly until “REP” or “REP1”
appears.
on the remote
Hooking up the system securely
ID3 tag information for MP3 files when ID3 version 1 and version
2 tags are used.
up to 30 characters of ID3 tag information using uppercase letters
(A to Z), numbers (0 to 9), and symbols (‘< > * + , / @ [ \ ] _).
e characters may not be displayed correctly according to the
character code.
To change the play mode
Press PLAY MODE
stopped. You can select normal play (“
files in the folder on the disc), shuffle play (“SHUF” or
repeatedly while the player is
FM lead antenna
(Extend it horizontally.)
”
for all MP3
“
SHUF*”), or program play (“PGM”).
* When playing a CD-DA disc,
(SHUF) Play performs the same
Notes on using the remote
Using optional audio components
operation as normal (shuffle) play.
With normal use, the batteries should last for about six months.
Do not mix an old battery with a new one or mix different types of
batteries.
Notes on Repeat Play
To connect an optional headphones
All tracks or files on a disc are played repeatedly up to five times.
If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
Connect headphones to the PHONES jack
unit.
on the
“REP1” indicates that a single track or file is repeated until you stop
it.
Antennas
To set the clock
Notes on playing MP3 discs
To connect an optional component
Find a location and an orientation that provide
good reception, and then set up the antenna.
Keep the antennas away from the speaker cords
and the power cord to avoid picking up noise.
Do not save other types of tracks or files or unnecessary folders on a
1
Turn on the system.
Press (on/standby)
Connect additional audio source components to the
disc that has MP3 files.
AUDIO IN jack
on the unit using an analog audio
.
Folders that have no MP3 files are skipped.
MP3 files are played back in the order that they are recorded onto
the disc.
AM loop antenna
cord (not supplied). Turn down the volume on the
system, and then select the AUDIO IN function.
2
Select the clock set mode.
e system can only play MP3 files that have a file extension of
“.MP3”.
If there are files on the disc that have the “.MP3” file extension,
but that are not MP3 files, the unit may produce noise or may
malfunction.
e maximum number of:
folders is 150 (including the root folder).
MP3 files is 255.
MP3 files and folders that can be contained on a single disc is 300.
folder levels (the tree structure of files) is eight.
Compatibility with all MP3 encoding/writing soſtware, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
Press CLOCK/TIMER SET
on the remote. If the
current mode appears on the display, press /
on the remote repeatedly to select “CLOCK,” and
then press ENTER
on the remote.
3
Set the time.
Press /
on the remote repeatedly to set
Speakers
the hour, and then press ENTER
on the remote.
Solid (Red/)
Insert only the stripped
portion of the cord.
Use the same procedure to set the minutes.
Left speaker
e clock settings are lost when you disconnect the
power cord or if a power failure occurs.
Solid (Black/)
To display the clock when the system is off, press
DISPLAY . e clock is displayed for about 8
Notes on playing multisession discs
seconds.
If the disc begins with a CD-DA (or MP3) session, it is recognized as
a CD-DA (or MP3) disc, and other sessions are not played back.
A disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
Right speaker
Speaker pads
Selecting a music source
Press the following buttons (or press FUNCTION
the remote repeatedly).
Attach the supplied speaker pads to the bottom of the
speakers to prevent slipping.
on
To select
CD
Tuner
Press
CD
on the remote.
Power
.
TUNER/BAND
For models with a voltage selector, set VOLTAGE
SELECTOR to the local power line voltage.
Connect the power cord to a wall socket.
If the plug does not fit the wall socket, detach the
supplied plug adaptor (only for models equipped
with an adaptor).
Component (connected using AUDIO IN
an audio cord)
.
Wall socket
Download from Www.Somanuals.com. All Manuals Search And Download.
|