Sony Stereo System CMT CP100 User Manual

4-233-754-12 (1)  
Micro Hi-Fi  
Component  
System  
Operating Instructions  
Owner’s Record  
The model and serial numbers are located at the rear. Record the serial number in the  
space provided below. Refer to them whenever you call upon your Sony dealer  
regarding this product.  
Model No.  
Serial No.  
CMT-CP100  
© 2001 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Parts Identification  
Sound Adjustment  
Adjusting the sound ............................. 16  
Main unit ............................................... 4  
Remote Control ..................................... 5  
Other Features  
Getting Started  
Falling asleep to music  
— Sleep Timer .............................. 16  
Hooking up the system .......................... 6  
Inserting two size-AA (R6) batteries into  
the remote control ........................... 7  
Setting the time...................................... 7  
Waking up to music  
— Daily Timer .............................. 16  
Optional Components  
CD  
Hooking up the optional components.... 18  
Loading the CD ..................................... 8  
Playing the CD  
Additional Information  
–– Normal Play/Shuffle Play/Repeat Play ....  
8
Precautions .......................................... 19  
Troubleshooting................................... 20  
Specifications ...................................... 21  
Programming the CD tracks  
–– Program Play .............................. 9  
Using the CD display ............................ 9  
* European model only  
Tuner  
Presetting radio stations....................... 10  
Listening to the radio  
–– Preset Tuning ........................... 10  
Using the Radio Data System (RDS)* .... 11  
Tape  
Loading a tape ..................................... 12  
Playing a tape ...................................... 12  
Recording to a tape  
–– CD Synchro Recording/  
Recording Manually/Program Edit ... 13  
Timer-recording radio programs ......... 14  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts Identification  
The items are arranged in alphabetical order.  
Refer to the pages indicated in parentheses () for details.  
Main unit  
1 2 3 4 5 6 78  
Z
Y
x
9
q;  
qa  
qs  
m
z
M
X
qd  
?/1  
A
qf  
qg  
qh  
wf  
Z
qj  
qk  
ql  
u
x
.
m
>
M
wd  
ws wa w;  
BASS 3 (16)  
PHONES jack wd  
TREBLE 4 (16)  
CD EJECT Z qj (8)  
CD SYNC qs (13, 14)  
CD uws (8, 9)  
CD xqk (8, 9, 21)  
CD ./> ql (8, 9)  
CD m/M ql (8)  
DSG 5 (16, 18)  
PLAY MODE wa (8, 9, 14)  
Remote sensor 2  
REPEAT w; (8)  
TAPE EJECT Z8 (12)  
TAPE REC z6 (13)  
TAPE Y7 (12~14)  
TAPE X qa (12~14)  
TAPE x9 (12~14, 21)  
TAPE m/M 0 (12)  
TUNER BAND qd (10, 21)  
TUNING MODE qg (10, 11)  
TUNING +/– qf (10, 11)  
VOLUME qh (17)  
BUTTON DESCRIPTIONS  
@/1 (power) 1 (7, 10, 14, 17, 18)  
FUNCTION wf (8~10, 12, 13, 18)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
1 2 3  
4
5
ws  
wa  
w;  
ql  
6
7
8
9
qk  
qj  
qh  
0
qa  
qg  
qf  
qdqs  
CD REPEAT qk (8)  
CD N ws (8, 9)  
DIR MODE ql (12~14)  
DISPLAY 2 (9, 11)  
DSG 1 (16)  
ENTER qd (7, 10, 14, 17)  
MEMORY qh (10)  
PLAY MODE 9 (8, 9, 14)  
SLEEP qf (16)  
BUTTON DESCRIPTIONS  
STEREO/MONO qj (11)  
TAPE Y w; (12~14)  
TIMER SELECT qs (15, 17)  
TIMER SET qg (7, 14, 17)  
TUNER/BAND wa (10)  
TUNING MODE q; (10, 11)  
VOL +/– qa (17)  
X 4 (8, 12~14)  
x5 (8, 9, 12~14)  
./> 6 (7~10, 14, 17)  
m/M 7 (8, 10~12)  
@/1 (power) 3 (7, 10, 14, 17)  
z REC 8 (13)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Hooking up the system  
Follow steps 1 through 4 of the procedure below to hook up your system using the supplied cords  
and accessories.  
AM loop antenna  
FM antenna  
Right speaker  
Left speaker  
2
1
3
4
1 Connect the speakers.  
Connect the right and left speaker cords to  
the SPEAKER terminals as shown below.  
3
3
Jack type A  
L
Gray (3)  
Extend the FM wire  
antenna horizontally  
AM loop  
antenna  
A
#
R
ANTENN  
#
Black (#)  
5
7
M
F
U
M
A
Insert this portion  
Jack type B  
Extend the FM  
wire antenna  
horizontally  
2 Connect the FM and AM antennas.  
Set the AM loop antenna up before  
connecting it.  
AM loop  
antenna  
ANTENNA  
FM75  
U
U
M
A
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 For models with a voltage selector, set  
VOLTAGE SELECTOR to the local  
power line voltage.  
Setting the time  
1 Turn on the system.  
110V-120V  
2 Press TIMER SET on the remote.  
If you are setting the clock for the first time,  
go to step 5.  
220V-240V  
VOLTAGE  
3 Press ./> on the remote  
repeatedly until “SET CLOCK” appears  
in the display.  
SELECTOR  
4 Connect the power cord to a wall outlet.  
If the plug does not fit the wall socket,  
detach the supplied plug adaptor (only for  
models equipped with an adaptor).  
4 Press ENTER on the remote.  
The hour indication flashes.  
5 Press ./> on the remote  
To turn on the system, press @/1.  
repeatedly to set the hour.  
6 Press ENTER on the remote.  
Inserting two size-AA (R6)  
batteries into the remote  
control  
The minute indication flashes.  
7 Press ./> on the remote  
repeatedly to set the minute.  
8 Press ENTER on the remote.  
The clock will begin operating.  
To reset the system clock  
Start over from step 1.  
e
E
E
e
Tip  
When the remote no longer operates the system,  
replace both batteries with new ones.  
Note  
If you do not use the remote for a long period of time,  
remove the batteries to prevent possible damage from  
battery leakage and corrosion.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
2 Press PLAY MODE repeatedly until the  
mode you want appears in the display.  
Loading the CD  
Select  
To play  
No display  
SHUFFLE  
The CD in original order.  
1 Press CD EJECT Z.  
The tracks on the CD in random  
order.  
The disc tray slides out.  
PGM  
The tracks on the CD in any  
order that you want (see  
“Programming the CD tracks” on  
page 9).  
2 Load a CD onto the disc tray.  
3 Press CD u (or CD N on the remote).  
Load with the  
label side up.  
When you play  
a CD single  
(8 cm CD),  
load it onto the  
inner circle of  
the tray.  
Other Operations  
To  
Do this  
Stop playback  
Pause  
Press CD x.  
Press CD u (or X on the  
remote). Press again to  
resume playback.  
3 Press CD EJECT Z again to close the  
disc tray.  
Select a track  
During playback or pause,  
press CD ./>  
repeatedly until you find the  
desired track.  
Notes  
• The disc cannot be viewed through the front  
window when a CD single (8 cm CD) is loaded.  
• The characters printed on the disc appear upside  
down when viewed through the front window.  
Find a point in a track  
Remove the CD  
During playback, press and  
hold down CD m/M  
until you find the desired  
point.  
Playing the CD  
Press CD EJECT Z.  
–– Normal Play/Shuffle Play/Repeat  
Play  
Play repeatedly  
(Repeat Play)  
Press REPEAT repeatedly  
during playback until  
“REPEAT” or  
This system lets you play CDs in different play  
modes.  
“REPEAT 1” appears in the  
display.  
REPEAT: For all the tracks  
on the CD.  
REPEAT 1: For only the  
currently playing track.  
1 005  
To cancel playing  
Track number Playing time  
repeatedly, press REPEAT  
repeatedly until “REPEAT”  
and “REPEAT 1” disappear  
from the display.  
1 Turn FUNCTION until “CD” appears in  
the display.  
The indicator surrounding the CD u and  
CD x buttons lights up.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming the CD  
tracks  
Using the CD display  
Press DISPLAY on the remote repeatedly.  
–– Program Play  
The display changes as follows:  
You can make a program of up to 24 tracks on  
a CD in any order that you want.  
During normal playback  
Current track number and elapsed playing time  
of the track t Current track number and  
remaining playing time of the track t  
Remaining playing time of the entire CD t  
Clock display t Current track number and  
elapsed playing time of the track t ......  
1 Turn FUNCTION until “CD” appears in  
the display.  
2 Press PLAY MODE repeatedly until  
“PGM” appears in the display.  
3 Press CD ./> repeatedly until the  
desired track number appears in the  
display.  
While the CD is stopped  
Total playing time t Clock display t  
Current source display t Total playing time  
t ......  
PGM  
Note  
3 243  
If the CD contains 25 tracks or more, the remaining  
playing time of the current track will appears as  
“---.--” for each track starting with the 25th.  
Selected track  
number  
Total playing time  
4 Press PLAY MODE.  
The selected track is programmed.  
The selection number appears in the  
display.  
5 To program additional tracks, repeat  
steps 3 and 4.  
6 Press CD u (or CD N on the remote).  
To  
Do this  
Cancel Program Play  
Press PLAY MODE  
repeatedly until “PGM”  
disappears from the display.  
Add a track to the end Do steps 3 and 4 with  
of the program  
Program Play stopped.  
Erase the entire  
program  
Press CD x with Program  
Play stopped.  
Tips  
• The program you made remains after Program Play  
finishes. To play the program again, switch the  
function to CD, and then press CD u (or CD N  
on the remote).  
• “--.--” appears in the display when the total program  
time exceeds 100 minutes.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner  
To change the preset number  
Start over from step 2.  
Presetting radio stations  
Tip  
The system can store a total of 30 preset  
stations (20 for FM and 10 for AM).  
The preset stations are saved in the system’s memory  
for about a day even if you disconnect the power cord  
or a power failure occurs.  
1 Turn FUNCTION until “TUNER” appears  
To change the AM tuning interval  
(not applicable on the European,  
Middle Eastern and Philippine  
models)  
The AM tuning interval is factory-preset to 9 kHz (or  
10 kHz for some areas). To switch the AM tuning  
interval, tune in any AM station first, then turn off the  
system. Pressing and holding down TUNING +, turn  
the system back on. When you change the interval,  
all the AM preset stations are erased. To change back  
to the original interval, tune in any AM station first,  
then turn off the system. Pressing and holding down  
TUNING –, turn the system back on.  
in the display.  
The indicator surrounding the TUNER  
BAND button lights up.  
2 Press TUNER BAND to select FM or  
AM.  
3 Press TUNING MODE repeatedly until  
“AUTO” appears in the display.  
4 Press TUNING +/– (or m/M on the  
remote).  
The frequency changes as the system scans  
for a station. Scanning stops automatically  
when a station is tuned in. At that time,  
“TUNED” and “STEREO” (for stereo  
program only) appear.  
Listening to the radio  
–– Preset Tuning  
5 Press MEMORY on the remote.  
Presetting radio stations in the system’s  
memory in advance make it easy to tune in  
those stations later (see “Presetting radio  
stations” on this page).  
A preset number flashes.  
PRESET  
STEREO  
TUNED  
MHz  
1FM1005  
1 Turn FUNCTION until TUNERappears  
in the display.  
Preset number  
Frequency  
2 Press TUNER BAND to select FM or  
AM.  
6 Press ./> on the remote  
repeatedly to select the preset number  
that you want.  
3 Press TUNING MODE repeatedly until  
PRESETappears in the display.  
7 Press ENTER on the remote.  
The station is stored to the selected preset  
number.  
4 Press TUNING +/(or m/M on the  
remote) repeatedly to display the preset  
number of the desired station.  
8 Repeat steps 2 through 7 to preset  
To turn off the radio  
Press ?/1.  
other stations.  
To tune in a weak station  
In step 3, press TUNING MODE repeatedly  
until “AUTO” and “PRESET” disappear from  
the display, then press TUNING +/– (or  
m/M on the remote) repeatedly to tune in  
the station.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To tune in a non-preset radio station  
In step 3, press TUNING MODE repeatedly  
until “AUTO” and “PRESET” disappear from  
the display, then press TUNING +/– (or  
m/M on the remote) repeatedly to tune in  
the desired station (Manual Tuning).  
Tips  
• If there is static during an FM broadcast, press  
STEREO/MONO on the remote until “MONO”  
appears in the display. After “MONO” scrolls  
across the display, the frequency will appear. The  
broadcast will no longer be in stereo, but the  
reception will improve.  
• To improve the reception, adjust the supplied  
antennas or connect an external antenna.  
Using the Radio Data  
System (RDS)  
(European model only)  
What is the Radio Data System?  
Radio Data System (RDS)* is a broadcasting  
service that allows radio stations to send  
additional information along with the regular  
program signal.  
Note  
RDS may not work properly if the station you have  
tuned in is not transmitting the RDS signal properly  
or if the signal is weak.  
* Not all FM stations provide RDS service, nor do  
they all provide the same type of services. If you  
are not familiar with the RDS system, check with  
your local radio stations for details on RDS services  
in your area.  
Receiving RDS broadcasts  
Simply select a station from the FM band.  
When you tune in a station that provides RDS  
services, the station name appears in the  
display.  
To check the RDS information  
Each time you press DISPLAY on the remote,  
the display changes as follows:  
Station name* t Frequency t Clock display  
t Station name* t ......  
* If the RDS broadcast is not properly received, the  
station name may not appear in the display.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tape  
Other Operations  
Loading a tape  
Do this  
To  
Press TAPE x.  
Stop playback  
Pause  
1 Press TAPE EJECT Z.  
Press TAPE X. Press again to  
resume playback.  
2 Load a recorded/recordable tape into  
With the tape stopped, press  
TAPE m/M.  
Fast-forward or  
rewind  
the cassette holder.  
With the side you want to play/  
record on facing towards you  
Press TAPE EJECT Z.  
Remove the tape  
Z
Y
x
m
z
M
X
?/1  
Playing a tape  
You can use Type I (normal) tape.  
1 Load a recorded tape into the cassette  
holder.  
2 Turn FUNCTION until “TAPE” appears  
in the display.  
The indicator surrounding the TAPE Y  
and TAPE x buttons lights up.  
3 Press DIR MODE on the remote  
repeatedly to select “ ” to play one  
side of the tape, “  
” to play both  
sides, or “  
repeatedly.  
”* to play both sides  
* The tape automatically stops after playing back  
five times.  
4 Press TAPE Y.  
Press TAPE Y again to play the reverse  
side. The tape starts playing back.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording to a tape  
–– CD Synchro Recording/Recording Manually/Program Edit  
You can record from a CD, radio or any of the connected components. You can use Type I (normal)  
tape.  
Recording from a CD  
(CD Synchro Recording)  
Recording manually  
Steps  
Load a recordable tape into the cassette holder.  
1
2
Turn FUNCTION to select the source you  
want to record from.  
Load a CD onto the disc tray.  
Turn FUNCTION until “CD” appears in  
the display.  
Load a CD or tune in the desired station.  
3
4
Press TAPE REC z (or z REC on the  
remote).  
Press CD SYNC.  
The tape stands by for recording.  
” and “B” (or “b”) appear.  
To start recording on the side facing away from you, press TAPE Y until “  
changes to “ .”  
Press DIR MODE on the remote repeatedly to select “ ” to record on one side of  
5
6
the tape, or “  
” or “  
” to record on both sides.  
Press TAPE X, and then start playing  
the desired source.  
Press TAPE X.  
To stop recording  
Press TAPE x.  
Tip  
For recording manually:  
To pause recording, press TAPE X.  
continued  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording to a tape (continued)  
Timer-recording radio  
programs  
Recording CD tracks in your  
favorite order  
To timer-record, make sure that you have set  
the system clock correctly (see “Setting the  
time” on page 7) and preset the radio station  
(see “Presetting radio stations” on page 10).  
–– Program Edit  
1 Load a recordable tape into the  
cassette holder.  
1 Tune in the desired preset radio station  
(see Listening to the radioon page  
10).  
2 Load a CD onto the disc tray.  
3 Do steps 1 through 5 in Program Play  
(see page 9).  
2 Load a recordable tape.  
4 Press CD SYNC.  
3 Press TIMER SET on the remote.  
The tape stands by for recording and the CD  
stands by for playback.  
4 Press ./> on the remote  
repeatedly until SET RECappears in  
the display.  
” and “B” (or “b”) appear, and the  
CD SYNC indicator lights up.  
“SET REC” scrolls and “c REC” appears  
in the display.  
To start recording on the side facing away  
from you, press TAPE Y until “  
changes to “ .”  
5 Press ENTER on the remote.  
“ON TIME” appears, then the hour  
indication flashes.  
5 Press DIR MODE on the remote  
repeatedly to select “ ” to record on  
one side of the tape, or “  
to record on both sides.  
or “  
6 Set the starting time.  
Press ./> on the remote repeatedly to  
set the hour, then press ENTER on the  
remote.  
6 Press TAPE X.  
The minute indication begins flashing next.  
Do this  
To  
Press ./> on the remote repeatedly to  
set the minute, then press ENTER on the  
remote.  
Press TAPE x.  
Stop recording  
Press PLAY MODE repeatedly  
until “PGM” disappears from  
the display.  
Cancel Program  
Edit  
“OFF TIME” appears, then the hour  
indication flashes again.  
Tip  
7 Set the stopping time by repeating step  
You can specify which tracks are recorded on each  
side of the tape during CD Synchro Recording. In  
step 3, after programming the tracks for first side,  
press X on the remote. You can then program the  
tracks for the other side. In this case, make sure you  
6.  
The start time, the stopping time,  
“TUNER”, and the preset station appear in  
turn, then the original display returns.  
select “  
” or “  
” in step 5.  
8 Press @/1 to turn off the system.  
When the recording starts, the volume level  
is automatically set to the minimum.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To  
Do this  
Check the settings  
Press TIMER SELECT on the  
remote repeatedly until  
c REC” appears in the  
display. The preset items  
appear in turn.  
Turn off the timer  
Press TIMER SELECT on the  
remote repeatedly until  
c REC” disappears from the  
display.  
Tip  
Once you set the timer, the time settings will remain  
in the system’s memory until you change them, even  
when you turn the system or the timer off. The  
settings that were last used will be in effect when you  
turn the timer on again.  
Notes  
• The system will turn on 15 seconds before the  
specified starting time.  
• If the system is turned on at the specified starting  
time, recording will not occur.  
• When you have set the Sleep Timer, the timer  
recording will not operate until the Sleep Timer  
Function is turned off.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjustment  
Other Features  
Adjusting the sound  
Falling asleep to music  
— Sleep Timer  
Generating a more dynamic sound  
(Dynamic Sound Generator)  
The Sleep Timer Function lets you specify a  
sleep time, after which the system stops playing  
and turns off automatically. You can thus fall  
asleep to music.  
Press DSG.  
To cancel the DSG, press DSG again.  
Adjusting the bass  
Press SLEEP on the remote repeatedly.  
Turn BASS.  
The sleep time changes as follows:  
You can adjust the bass in 7 steps.  
AUTO* t 90MIN t 80MIN t 70MIN t  
t 10MIN t OFF t AUTO* t …  
Adjusting the treble  
* The system turns off after the current CD or tape  
finishes playing (up to 100 minutes). The system  
also turns off when you manually stop the CD or  
tape.  
Turn TREBLE.  
You can adjust the treble in 7 steps.  
To  
Press  
Check the remaining  
sleep time  
SLEEP on the remote once.  
SLEEP on the remote  
repeatedly until the time  
you want appears.  
Change the sleep time  
Cancel the Sleep  
Timer Function  
SLEEP on the remote  
repeatedly until “OFF”  
appears.  
Waking up to music  
— Daily Timer  
By setting the Daily Timer, you can make the  
system automatically turn on and off at  
specified times. To use this function, make  
sure that you have set the system clock  
correctly (see “Setting the time” on page 7).  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Prepare the music source you want to  
8 Press ./> on the remote  
repeatedly until the music source you  
want appears.  
listen to when the system turns on.  
• CD: Load a CD. To start playing from a  
specific track, make a program (see  
The display changes as follows:  
“Programming the CD tracks” on page 9).  
t TUNER y CD T  
• Tape: Load a tape with the side you want  
to play facing towards you.  
t TAPE T  
9 Press ENTER on the remote.  
The starting time, the stopping time, and the  
music source appear in turn, then the  
original display returns.  
• Radio: Tune in the preset radio station  
that you want (see “Listening to the radio”  
on page 10).  
2 Adjust the volume.  
3 Press TIMER SET on the remote.  
4 Press ./> on the remote  
repeatedly until “SET DAILY” appears  
in the display.  
10Press @/1 to turn off the system.  
To  
Do this  
Check the settings  
Press TIMER SELECT on the  
remote repeatedly until  
c DAILY” appears in the  
display. The preset items  
appear in turn.  
“SET DAILY” scrolls and “c DAILY”  
appears in the display.  
5 Press ENTER on the remote.  
“ON TIME” appears, then the hour  
indication flashes.  
Turn off the timer  
Press TIMER SELECT on the  
remote repeatedly until  
c DAILY” disappears from  
the display.  
6 Set the starting time.  
Press ./> on the remote repeatedly to  
set the hour, then press ENTER on the  
remote.  
Tip  
Once you set the timer, the time settings will remain  
in the system’s memory until you change them, even  
when you turn the system or the timer off. The  
settings that were last used will be in effect when you  
turn the timer on again.  
The minute indication begins flashing next.  
Press ./> on the remote repeatedly to  
set the minute, then press ENTER on the  
remote.  
Notes  
• The system will turn on 15 seconds before the  
specified starting time.  
• When you have set the Sleep Timer, the Daily  
Timer will not operate until the Sleep Timer  
Function is turned off.  
“OFF TIME” appears, then the hour  
indication flashes again.  
7 Set the stopping time by repeating step  
6.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Components  
Tip  
If you cannot select “VIDEO” by turning  
FUNCTION, press @/1 while pressing down DSG in  
standby mode. The function will change from “MD”  
to “VIDEO”, and “VIDEO” will appear in the  
display. To change back to “MD”, repeat this  
procedure.  
Hooking up the optional  
components  
You can connect a variety of components to  
your system in order to enhance it. Make sure  
that the color of the plugs matches that of the  
connectors.  
To the audio output jacks  
on your MD deck/VCR  
To the digital input connector  
on your MD deck*  
* If the jack is covered with a cap, remove it before  
use.  
To  
Do This  
Make a digital  
recording from  
CD to MD  
Connect the optical cable.  
Listen to the  
connected MD  
deck  
Turn FUNCTION until “MD”  
appears in the display.  
Listen to the  
connected VCR  
Turn FUNCTION until  
“VIDEO” appears in the  
display.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Notes on CDs  
• Before playing a CD, clean the CD surface with a  
cleaning cloth. Wipe the CD from the center out.  
• Do not play a CD with tape, stickers, or adhesives  
on any of its surfaces as this may damage the  
system.  
• Do not use solvents.  
• Do not expose the CDs to direct sunlight or heat  
sources.  
Precautions  
On operating voltage  
Before operating the system, check that the operating  
voltage of your system is identical with the voltage of  
your local power supply.  
On safety  
Cleaning the cabinet  
• The unit is not disconnected from the AC power  
source (mains) as long as it is connected to the wall  
outlet, even if the unit itself has been turned off.  
• Unplug the system from the wall outlet (mains) if it  
will not be used for an extended period of time. To  
disconnect the power cord (mains lead), pull it out  
by the plug. Never pull the cord itself.  
• Should any solid object or liquid fall into the  
system, unplug the system and have it checked by  
qualified personnel before operating it any further.  
• AC power cord must be changed only at the  
qualified service shop.  
Clean the cabinet, panel and controls with a soft cloth  
slightly moistened with mild detergent solution. Do  
not use any type of abrasive pad, scouring powder or  
solvent such as thinner, benzene or alcohol.  
To save a tape permanently  
To prevent a tape from being accidentally recorded  
over, break off the cassette tabs from side A or side B  
as illustrated.  
Break off the  
cassette tab  
On placement  
• Do not place the system in an inclined position.  
• Do not place the system in locations where it is:  
— Extremely hot or cold  
— Dusty or dirty  
— Very humid  
— Subject to vibrations  
If you later want to reuse the tape for recording, cover  
the broken tab with adhesive tape.  
— Subject to direct sunlight  
Before placing a cassette in the tape  
deck  
On heat buildup  
Take up any slack in the tape. Otherwise the tape  
may get entangled in the tape deck’s playing  
mechanism and become damaged.  
• Although the unit heats up during operation, this is  
not a malfunction.  
• Place the system in a location with adequate  
ventilation to prevent heat build-up in the system.  
If you continuously use this system at a large volume,  
the cabinet temperature of the top, side and bottom  
rises considerably. To avoid burning yourself, do not  
touch the cabinet.  
When using a tape longer than 90  
minutes  
The tape is very elastic. Do not change the tape  
operations such as play, stop, and fast-winding etc.  
too frequently. The tape may get entangled in the  
tape deck’s playing mechanism.  
To prevent a malfunction, do not cover the ventilation  
hole for the cooling fan.  
Cleaning the tape heads  
On operation  
Clean the tape heads after every 10 hours of use.  
Make sure to clean the tape heads before making an  
important recording or after playing an old tape. Use  
a commercially available dry-type or wet-type  
cleaning cassette. For details, refer to the instructions  
of the cleaning cassette.  
• If the system is brought directly from a cold place  
to a warm place, or is placed in a very damp room,  
moisture may condense on the lens inside the CD  
player. Should this occur, the system will not  
operate properly. Remove the CD and leave the  
system turned on for about an hour until the  
moisture evaporates.  
Demagnetizing the tape heads  
• When moving the unit, remove any disc that may be  
on the disc tray.  
Demagnetize the tape heads and the metal parts that  
have contact with the tape after every 20 to 30 hours  
of use with a commercially available demagnetizing  
cassette. For details, refer to the instructions of the  
demagnetizing cassette.  
If you have any questions or problems concerning  
your system, please consult your nearest Sony dealer.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Speakers  
Troubleshooting  
Sound comes from only one channel, or the left  
and right volumes are unbalanced.  
Should you encounter a problem with your  
system, do the following:  
• Check the speaker connections and placement.  
1 Make sure the power cord and speaker cords  
are correctly and firmly connected.  
2 Find your problem in the troubleshooting  
checklist below and take the indicated  
corrective action.  
CD Player  
The CD will not play.  
• The CD is dirty.  
If the problem persists after doing all of the  
above, consult your nearest Sony dealer.  
• The surface of the CD is scratched. Replace the  
CD.  
• The CD is loaded with the label side down.  
General  
• Condensation has built up in the system.  
Remove the CD and leave the system turned on  
for about an hour until the moisture evaporates.  
There is no sound from the speakers.  
• Adjust the volume.  
Play does not start from the first track.  
• The headphones are connected.  
• Check the speaker connections.  
• The player is in Program or Shuffle Play. Press  
PLAY MODE repeatedly until “PGM” and  
“SHUFFLE” disappear.  
There is severe hum or noise.  
• A TV or VCR is placed too close to the unit.  
Move the unit away from the TV or VCR.  
“0:00” (or “AM 12:00”) flashes in the display.  
Tape Deck  
• A power interruption has occurred. Set the clock  
(see page 7) and timer settings (see pages 14 and  
16) again.  
Recording cannot be done.  
• There is no tape in the cassette holder.  
• The record protect tab has been removed from  
the cassette (see page 19).  
The timer does not function.  
• Make sure the clock is correctly set (see page 7).  
• The tape has come to the end.  
• You cannot operate the Daily Timer and the  
timer recording at the same time.  
The tape does not record or play, or there is a  
decrease in sound level.  
c DAILY” and “c REC” do not appear when  
• The heads are dirty. Clean them (see page 19).  
you press TIMER SELECT on the remote.  
• The record/playback heads are magnetized.  
Demagnetize them (see page 19).  
• Make sure each timer is correctly set (see pages  
14 and 16).  
• Make sure the clock is correctly set (see page 7).  
The tape does not erase completely.  
• The record/playback heads are magnetized.  
Demagnetize them (see page 19).  
The color on the TV screen is irregular.  
• Move the speakers farther away from the TV set.  
There is excessive wow or flutter, or the sound  
drops out.  
The remote does not work.  
• There is an obstacle between the remote and the  
unit.  
• The capstans or pinch rollers are dirty. Clean  
them (see page 19).  
• You are not pointing the remote in the direction  
of the system’s sensor.  
Noise increases or the high frequencies are  
missing.  
• The batteries in the remote have run down.  
Replace the batteries.  
• The record/playback heads are magnetized.  
Demagnetize them (see page 19).  
• Make sure that the batteries are inserted  
correctly.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner  
Specifications  
There is a severe hum or noise (“TUNED” or  
“STEREO” flashes).  
Amplifier section  
• Adjust the antenna.  
For the U.S. model  
AUDIO POWER SPECIFICATIONS  
POWER OUTPUT AND TOTAL  
HARMONIC DISTORTION:  
• The signal strength is too weak. Connect an  
external antenna.  
• Make sure that the antenna is connected  
properly.  
• Do not bend or roll up the antenna.  
With 6-ohm loads, both channels driven, from  
70 - 20,000 Hz; rated 18 watts per channel  
minimum RMS power, with no more than 0.9%  
total harmonic distortion from 250 milliwatts to  
rated output.  
• The two wires comprising the FM antenna have  
been pulled further apart since the system was  
first purchased. Repair or replace with a new  
one.  
• The AM antenna wire is detached from the stand.  
• Keep the antennas as far away from the speaker  
cords as possible.  
North American model:  
Continuous RMS power output (reference):  
35 + 35 W  
A stereo FM program cannot be received in  
stereo.  
(6 ohms at 1 kHz, 10%  
THD)  
• Press STEREO/MONO on the remote until  
“STEREO” appears in the display.  
Total harmonic distortion less than 0.07% (6 ohms at  
1 kHz, 18 W)  
European model:  
Resetting the system  
DIN power output (rated): 30 + 30 W  
(6 ohms at 1 kHz, DIN)  
Continuous RMS power output (reference):  
35 + 35 W  
With the system turned on, press TAPE x,  
CD x and TUNER BAND at the same time.  
The system is reset to the factory settings. All  
previous settings are cleared and must be set  
again.  
(6 ohms at 1 kHz, 10%  
THD)  
Music power output (reference):  
85 + 85 W  
Other models:  
The following measured at 230 V AC, 60 Hz  
DIN power output (rated): 27 + 27 W  
(6 ohms at 1 kHz, DIN)  
Continuous RMS power output (reference):  
32 + 32 W  
Messages  
One of the following messages may appear or  
flash in the display during operations.  
(6 ohms at 1 kHz, 10%  
NO DISC  
THD)  
The following measured at 220 V AC, 60 Hz  
DIN power output (rated): 23 + 23 W  
(6 ohms at 1 kHz, DIN)  
• There is no CD on the disc tray.  
PGM FULL  
Continuous RMS power output (reference):  
26 + 26 W  
• You try to program 25 tracks or more.  
(6 ohms at 1 kHz, 10%  
THD)  
Inputs  
AUDIO IN MD (VIDEO) (phono jacks):  
Sensitivity 500/250 mV,  
impedance 47 kilohms  
Outputs  
OPTICAL DIGITAL OUT (CD):  
Optical  
PHONES:  
Accepts headphones with  
an impedance of 8 ohms  
or more  
SPEAKER:  
6 ohms  
21  
continued  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Speakers  
Specifications (continued)  
Speaker system  
Two-way, bass reflex  
system  
Speaker units  
12 cm dia., cone type  
woofer  
2.5 cm dia., semi-dome-  
type tweeter  
CD player section  
System  
Compact disc and digital  
audio system  
Laser  
Semiconductor laser  
(λ = 780 nm)  
Rated impedance  
Dimensions (w/h/d)  
6 ohms  
Approx. 150 × 252 ×  
Emission  
255 mm  
duration: continuous  
780 - 790 nm  
2 Hz - 20 kHz (±0.5 dB)  
Mass  
Approx. 2.6 kg net per  
speaker  
Wavelength  
Frequency response  
General  
Power requirements  
North American model: 120 V AC, 60 Hz  
European model:  
Australian model:  
Mexican model:  
Other models:  
Tape player section  
Recording system  
Frequency response  
4-track 2-channel stereo  
50 - 13,000 Hz (±3 dB),  
using a Sony TYPE I  
cassette  
230 V AC, 50/60 Hz  
220 - 240 V AC, 50/60 Hz  
120 V AC, 60 Hz  
110 - 120 V or 220 -  
240 V AC , 50/60 Hz  
Adjustable with voltage  
selector  
Wow and flutter  
±0.15% W. Peak (IEC)  
0.1% W. RMS (NAB)  
±0.2% W. Peak (DIN)  
Tuner section  
Power consumption  
European model:  
FM stereo, FM/AM superheterodyne tuner  
See the nameplate  
0.5 W (in the standby  
mode)  
FM tuner section  
Tuning range  
North American model: 87.5 - 108.0 MHz  
(100-kHz step)  
Other models:  
See the nameplate  
Dimensions (w/h/d)  
Approx. 190 × 252 ×  
345 mm incl. projecting  
parts and controls  
Other models:  
87.5 - 108.0 MHz  
(50-kHz step)  
Antenna  
Antenna terminals  
Intermediate frequency  
FM wire antenna  
75 ohm unbalanced  
10.7 MHz  
Mass  
Approx. 5.6 kg  
AM tuner section  
Tuning range  
Pan-American model:  
Supplied accessories  
Remote commander (1)  
AM loop antenna (1)  
FM wire antenna (1)  
Batteries (2)  
530 - 1,710 kHz  
(with the tuning interval  
set at 10 kHz)  
531 - 1,710 kHz  
(with the tuning interval  
set at 9 kHz)  
Design and specifications are subject to change  
without notice.  
European model:  
531 - 1,602 kHz  
(with the tuning interval  
set at 9 kHz)  
Middle Eastern and Philippine models:  
531 - 1,602 kHz  
(with the tuning interval  
set at 9 kHz)  
530 - 1,710 kHz  
Other models:  
(with the tuning interval  
set at 10 kHz)  
531 - 1,602 kHz  
(with the tuning interval  
set at 9 kHz)  
AM loop antenna, external  
antenna terminal  
450 kHz  
Antenna  
Intermediate frequency  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sony Corporation  
Printed in Korea  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Computer Monitor LL T1803 H User Manual
Sharp Projector XV Z7000E User Manual
Sony Flat Panel Television SDM S204 B User Manual
Sony VCR DVW 250 User Manual
SoundCraft Music Mixer 1601S User Manual
SpeakerCraft Speaker SLS User Manual
Speco Technologies Portable Speaker SP30PT User Manual
Sterling Plumbing Product BP1012 User Manual
Sylvania Cordless Telephone STC580 User Manual
Sylvania DVD Player CDVC800D User Manual