4-238-431-11 (1)
Micro Hi-Fi
Component
System
Operating Instructions
CMT-C7NT
© 2002 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Releasing group tracks
— Release Function .................................. 33
Erasing recordings
— Erase Function ..................................... 34
Moving recorded tracks
Parts Identification
Main unit ............................................................ 4
Remote control ................................................... 5
Getting Started
— Move Function ..................................... 36
Dividing recorded tracks
— Divide Function ................................... 37
Combining recorded tracks
— Combine Function ............................... 38
Undoing the last edit
— Undo Function ..................................... 39
Changing the recording level after recording
— S.F Edit ................................................ 40
Hooking up the system ....................................... 6
Preparing the remote .......................................... 7
Replacing the battery in the remote.................... 7
Setting the time ................................................... 8
Conserving power in standby mode ................... 8
CD
Loading the CD .................................................. 9
Playing the CD
Tuner
— Normal Play/Shuffle Play/
Repeat Play ............................................ 9
Programing the CD tracks
— Program Play ....................................... 11
Using the CD display ....................................... 12
Labeling a CD
Presetting radio stations ................................... 42
Listening to the radio
— Preset Tuning ....................................... 43
Labeling the preset stations
— Station Name ....................................... 44
Using the Radio Data System (RDS)* ............. 44
— Disc Memo........................................... 13
Sound Adjustment
MD — Play
Reinforcing the bass sound
Loading the MD ............................................... 14
Playing the MD
— DBFB ................................................... 45
Selecting the Preset Equalizer menu ................ 45
— Normal Play/Shuffle Play/
Repeat Play .......................................... 14
Programing the MD tracks
— Program Play ....................................... 16
Playing tracks in a group .................................. 17
Using the MD display ...................................... 17
Timer
Falling asleep to music
— Sleep Timer .......................................... 45
Waking up to music
— Daily Timer .......................................... 46
Timer recording radio programs ...................... 47
MD — Recording
Before you start recording ................................ 18
After recording ................................................. 19
Recording a CD on an MD
Optional Components
Hooking up the optional components............... 49
— CD-MD Synchro Recording/CD-MD
High-Speed Synchro Recording .......... 19
Recording on an MD manually
— Manual Recording ............................... 20
Recording the current track
Optional Personal Computer
Connecting a personal computer to
the system ................................................. 51
Listen to the connected personal computer ...... 52
About the supplied M-crew for CMT-C7NT ... 52
— Rec It .................................................... 21
Starting recording with 6 seconds of prestored
audio data
About the supplied OpenMG Jukebox for Sony
Net MDs .................................................... 53
— Time Machine Recording .................... 21
Recording tips
— Recording for long times/Marking track
numbers/Smart space/Adjusting the
recording level ..................................... 22
Recording CD tracks on an MD as group tracks
— Group Function .................................... 27
Additional Information
Precautions ....................................................... 54
System limitations of MDs ............................... 56
Troubleshooting ............................................... 57
Self-diagnosis display ...................................... 60
Specifications ................................................... 63
* European models only
MD — Editing
Before you start editing .................................... 29
Labeling an MD
— Name Function ..................................... 29
Labeling a group
— Name Function ..................................... 31
Registering non-group tracks as group tracks in a
newly created group
— Create Function .................................... 32
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Identification
The items are arranged in alphabetical order.
Refer to the pages indicated in parentheses () for details.
Main unit
1
2
qs
qa
3
4
5
0
9 8
7 6
CD SYNC HIGH 8 (19, 60)
CD SYNC NORMAL 9 (19)
CD Z 2 (10, 60)
FUNCTION qs (9, 11, 13, 14, 16,
17, 19, 21–24, 26, 30–43, 50,
52)
MD Z 6 (15, 19, 29, 53)
NET MD 7 (53)
BUTTON DESCRIPTIONS
@/1 (power) 1 (7, 19, 29, 43, 46,
48, 53)
u 3 (9–11, 14–16, 19–21, 26,
28, 51)
x 4 (10, 11, 15, 16, 20–22, 26,
28, 51)
. > 5 (10, 11, 13, 15–17,
22–26, 30–41, 46–48)
m M 5 (10, 15, 36)
REC/REC IT 9 (20, 21, 25, 26,
28, 50, 60)
Remote sensor 0
TUNING +/– 5 (42)
VOL +/– qa (46)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
1 2 3 4
5
6
7
wk
wj
8
9
0
qa
wh
wg
wf
wd
ws
wa
qs
qd
qf
qg
w;
qlqkqjqh
CD x qh (10, 11)
CD X ws (10)
MD x qh (15, 16, 20–22, 26, 28,
51)
MD X ws (15, 26)
MD N wg (14, 16, 17, 19, 20)
MENU/NO q; (13, 14, 22–26,
29, 31–42)
NAME EDIT/SELECT 3 (13,
29–31, 44)
BUTTON DESCRIPTIONS
@/1 (power) 4 (7, 19, 29, 43, 46,
48, 53)
. > qa (8, 10, 11, 13–17,
22–26, 30–41, 46–48)
–/+ qa (8, 46, 48)
CD N wd (9, 11, 21)
CLEAR 9 (11, 13, 16, 30, 44)
CLOCK/TIMER SELECT 6
(47, 48)
CLOCK/TIMER SET 7 (8, 46,
47)
m M wh (10, 15, 36, 38)
PLAY MODE qk (9, 11, 13, 14,
16, 29, 40, 41)
CURSOR T/t wh (8, 13, 30)
DBFB qf (45)
PRESET EQ qg (45)
REPEAT qj (10, 15)
SCROLL 5 (12, 14, 18, 31)
SLEEP 1 (45)
DISPLAY wk (8, 12, 17, 44)
ENTER/YES 8 (8, 11, 13, 14,
16, 21–26, 29–42, 44, 46, 47)
FM MODE qj (43)
TIME 2 (8, 11, 12, 16, 17)
TUNER BAND wa (42, 43)
TUNING MODE qk (42, 43)
TUNING +/– ql (42, 43)
VOL +/– qd (46)
FUNCTION w; (9, 11, 13, 14, 16,
17, 19, 21–24, 26, 30–43, 50,
52)
GROUP ON/OFF wf (17, 27, 28,
30–34)
GROUP SKIP qs (17, 28, 31–33)
Letter/Number buttons wj (10,
13, 15, 30, 43)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system
Follow steps 1 through 3 of the procedure below to hook up your system using the supplied cords
and accessories.
AM loop antenna
FM antenna
CMT-C7NT
rear panel
Right speaker
Left speaker
1 Connect the speakers.
Connect the right and left speaker cords to
the SPEAKER terminals as shown below.
Left speaker cord
Jack type A
AM loop
antenna
Extend the FM wire
antenna horizontally
Right speaker cord
2 Connect the FM and AM antennas.
Set the AM loop antenna up before
connecting it.
Jack type B
AM loop
antenna
Extend the FM
wire antenna
horizontally
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connect the power cord to a wall outlet.
If the plug does not fit the wall socket,
attach the supplied plug adaptor (only for
models equipped with an adaptor).
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Discard
used batteries according to the manufacturer’s
instructions.
To turn on the system, press @/1.
Preparing the remote
Battery life
You can expect the remote to operate for about
6 months (using a Sony CR2025 lithium
battery) before the battery runs down. When
the battery no longer operates the remote,
replace the battery with a new one.
Pull out the insulating sheet to allow
power to flow from the battery.
The remote already contains a battery.
To avoid battery leakage
If you are not going to use the remote for a
long time, remove the battery to avoid damage
caused by corrosion from battery leakage.
Notes on lithium battery
• Keep the lithium battery out of the reach of
children.
Should the battery be swallowed,
immediately consult a doctor.
Replacing the battery in
the remote
1 Slide out and remove the battery case.
• Wipe the battery with a dry cloth to assure a
good contact.
• Be sure to observe the correct polarity when
installing the battery.
• Do not hold the battery with metallic
tweezers, otherwise a short-circuit may
occur.
2 Insert a new lithium battery CR2025
WARNING
with the + side facing up.
Battery may explode if you mistreated.
Do not recharge, disassemble or dispose of
in fire.
a lithium battery CR2025
3 Slide the battery case back in.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the time
Conserving power in
standby mode
1 Turn on the system.
Even if the system is off, the unit consumes
power to power the clock and to stay
responsive to commands from the remote.
Power saving mode was introduced to reduce
the amount of power consumed during standby.
2 Press CLOCK/TIMER SET on the
remote.
If you are setting the clock for the first time,
go to step 5.
3 Press – or + (. or >) on the
remote repeatedly until “CLOCK SET?”
appears in the display.
In this mode, the clock or demonstration is not
displayed.
To change to power saving mode, press
DISPLAY or TIME on the remote
repeatedly while the system is off until
demonstration mode and the clock
disappear from the display.
4 Press ENTER/YES on the remote.
The day indication flashes.
5 Press – or + (. or >) on the
remote repeatedly to set the day, and
then press ENTER/YES or CURSORt
on the remote.
To change the display
Press DISPLAY or TIME on the remote
repeatedly while the system is off.
The hour indication flashes.
6 Press – or + (. or >) on the
remote to set the hour, and then press
ENTER/YES or CURSORt on the
remote.
The display changes as follows:
Clock display* t Demonstration mode** t
Power saving mode t Clock display* t …
* After about 8 seconds, the system returns to power
saving mode.
The minute indication flashes.
**The indications in the display and lamps on several
buttons light up or flash even after the system is
turned off.
7 Press – or + (. or >) on the
remote repeatedly to set the minute,
and then press ENTER/YES on the
remote.
Tip
The timer continues to operate during power saving
mode.
If you made a mistake
Press TCURSOR or CURSORt on the
remote until the indication you wish to change
(day, hour, minute) flashes, and then change
the setting.
To reset the time
Start over from step 1.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
Playing the CD
Loading the CD
— Normal Play/Shuffle Play/Repeat
Play
1 Load a CD.
The CD is drawn in automatically.
This system lets you play CDs in different play
modes.
Track number
Playing time
1 Press FUNCTION repeatedly until “CD”
appears in the display.
Load with the label side up.
2 Press PLAY MODE on the remote in
stop mode repeatedly until the mode
you want appears in the display.
Tips
• To reload the CD, first remove the CD, and then
load it again.
To play
Select
• You can load a CD single (8-cm CD) without an
adapter.
The CD in original order.
No display
SHUF
Note
The tracks on the CD in random
order.
Do not load a CD single (8-cm CD) with an adapter.
Doing so may cause the system to malfunction.
The tracks on the CD in any
order that you want (see
“Programing the CD tracks” on
page 11).
PROGRAM
3 Press u (or CD N on the remote).
continued
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Playing the CD (continued)
You can start playing from the desired track in
Normal Play.
Press . or > repeatedly until the desired track
appears before step 3.
Other operations
Or, press the number buttons on the remote. The play
automatically starts.
To
Do this
Stop play
Pause
Press x.
To enter track number over 10
(on the remote only)
Press u (or X on the
remote).
Press again to resume play.
1 Press >10.
Select a track
During play or pause, press
. or > repeatedly
until you find the desired
track.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
Find a point in a track
During play, press and hold
m or M until you find
the desired point.
To enter track number 30, press >10, then 3 and 10/0.
Play repeatedly
(Repeat Play)
Press REPEAT on the
remote repeatedly during
play until “REP” or “REP
1” appears in the display.
REP: For all the tracks on
the CD up to 5 times.
REP 1: For only the
currently playing track.
To cancel playing
repeatedly, press REPEAT
repeatedly until “REP” and
“REP 1” disappear from the
display.
Remove the CD
Press CD Z.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
5 To program additional tracks, repeat
Programing the CD tracks
steps 3 and 4.
6 Press u (or CD N on the remote).
— Program Play
You can make a program of up to 25 tracks on
a CD in any order that you want.
To
Do this
Check the program
order
Press . or >
repeatedly during Program
Play.
1 Press FUNCTION repeatedly until “CD”
appears in the display.
Check the total
Press TIME on the remote in
2 Press PLAY MODE on the remote in
number of programed stop mode. The total number
tracks
of programed steps appears,
and then the last programed
track number and the total
playing time of the program.
stop mode repeatedly until
“PROGRAM” appears in the display.
3 Press . or > repeatedly until the
desired track number appears in the
display.
Cancel Program Play
Press x, and then press
PLAY MODE on the remote
repeatedly until
“PROGRAM” and “SHUF”
disappear from the display.
Add a track to the end Do steps 3 and 4 with
Selected track
number
Playing time of the
selected track
of the program
Program Play stopped.
Erase the last
programed track
Press CLEAR on the remote
in stop mode. Each time you
press the button, the last
4 Press ENTER/YES on the remote.
The track is programed.
programed track is erased.
“Step” appears, followed by the order
number of the track just programed. Then
the number of the last programed track
appears, followed by the total playing time
of the program. If you have made a mistake,
you can clear the last programed track from
the program by pressing CLEAR on the
remote.
Program the desired
track using the
number buttons on
the remote
Press number buttons instead
of performing steps 3 to 5.
For details on using the
number buttons, see page 10.
Tips
• The program you made remains after Program Play
finishes. To play the program again, switch the
function to CD, and then press u (or CD N on
the remote).
• “--.--” appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
Last programed Total playing time
track number
11
Download from Www.Somanuals.com. All Manuals Search And Download.
To scroll a long name
Press SCROLL on the remote.
Using the CD display
The title appears scrolling in the display.
Checking the remaining time
Press TIME on the remote repeatedly
during play.
Tips
• If you press TIME on the remote in stop mode for a
CD with CD text containing the artist name, the
artist name appears scrolling in the display.
• To label a disc title to a CD, see “Labeling a CD”
on page 13.
The display changes as follows:
Elapsed playing time on the current track t
Remaining time on the current track*1 t
Remaining time on the current CD*2 t
Elapsed playing time on the current track t…
*1 “--.--” appears when you check the remaining time
of a CD track whose number is 21 or over.
*2 “--.--” appears during Shuffle Play of a CD which
has 21 or more tracks, or during Program Play
when a CD track whose number is 21 or over is
selected.
Checking the total playing
time
Press TIME on the remote in stop mode.
Checking the track title or a
disc title
Press DISPLAY on the remote during play
or in stop mode.
The display changes as follows:
Clock*3 t Preset Equalizer name*3 t
Volume*3 t Playing time of the CD*4 t
Track title or disc title*5 t Clock*3 t …
*3 After 8 seconds, the playing time of the CD
appears.
*4 The display that appears depends on the current
disc status:
If the disc is stopped: The total playing time of the
CD is displayed.
If the disc is playing: The elapsed playing time of
the track, remaining playing time of the track, or
remaining playing time of the CD is displayed.
*5 The track title appears when the disc is playing
(only for CDs with CD text), and the disc title
appears when the disc is stopped. If a CD that has
no title, the track title or disc title is skipped.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
If you have selected numbers
Press the corresponding number button on
the remote.
Labeling a CD
— Disc Memo
The number is entered and the cursor shifts
to the right.
You can label up to 100 CDs with titles of up
to 20 symbols and characters. Whenever you
load a labeled CD, the title appears in the
display.
To enter a blank space
1 Press NAME EDIT/SELECT on the
remote to select uppercase or
lowercase letters.
Note
When labeling CDs for the first time, be sure
to first press FUNCTION repeatedly until
“CD” appears in the display, and then erase
all disc titles using the procedure “Erasing a
disc title” on page 14.
2 Press 10/0 on the remote.
A blank space is entered and the cursor
shifts to the right.
5 Repeat steps 3 and 4 to enter the rest
1 Press FUNCTION repeatedly until “CD”
of the name.
appears in the display.
To change a character
If “SHUF” or “PROGRAM” appears in the
display, press PLAY MODE on the remote
repeatedly until both disappear.
Press TCURSOR or CURSORt on the
remote repeatedly until the character to be
changed flashes, press CLEAR on the
remote to erase the character, then repeat
steps 3 and 4.
2 Press NAME EDIT/SELECT on the
remote.
The cursor starts flashing.
6 Press ENTER/YES on the remote to
3 Press NAME EDIT/SELECT on the
remote repeatedly to select the desired
type of character.
complete the labeling procedure.
To cancel labeling
Press MENU/NO on the remote.
The display changes as follows:
Selected AB* (Upper cases) t Selected
ab* (Lower cases) t Selected 12
(Numbers) t Selected AB* (Upper cases)
t …
continued
* Press number 1 repeatedly to display the
following symbols.
‘ – / , . ( ) : ! ?
In addition, when the symbols above appear in
the display, press . or > repeatedly to
display the following symbols.
& + < > _ = ” ; # $ % @
`
4 Enter a character.
If you have selected uppercase or
lowercase letters
1 Press the corresponding letter button on
the remote repeatedly until the
character to be entered flashes.
Or, press the button once and press .
or > repeatedly.
2 Press CURSORt on the remote.
The flashing character is entered and the
cursor shifts to the right.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MD — Play
Labeling a CD (continued)
Loading the MD
Checking the disc titles
Load an MD.
1 Press FUNCTION repeatedly until “CD”
With the label side up, and the
shutter on the righthand side
appears in the display.
2 Press MENU/NO on the remote in stop
mode.
3 Press . or > on the remote
repeatedly until “Name Check?”
appears, and then press ENTER/YES on
the remote.
4 Press . or > on the remote
repeatedly to select the disc titles
stored in the system memory between
001 and 100.
With the arrow pointing toward the deck
To check the current disc title
Press SCROLL on the remote in stop mode.
Playing the MD
Erasing a disc title
— Normal Play/Shuffle Play/Repeat
Play
1 Press FUNCTION repeatedly until “CD”
appears in the display.
This system lets you play MDs in different play
modes.
2 Press MENU/NO on the remote in stop
mode.
3 Press . or > on the remote
repeatedly until “Name Erase?”
appears, then press ENTER/YES on the
remote.
Track number Playing time
1 Press FUNCTION repeatedly until “MD”
4 Press . or > on the remote
repeatedly to select the disc name to be
erased.
appears in the display.
2 Press PLAY MODE on the remote in
stop mode repeatedly until the mode
you want appears in the display.
5 Press ENTER/YES on the remote again.
“Complete!” appears.
Select
To play
To erase all disc titles, press . or > on
the remote repeatedly until “All Erase?”
appears in step 3, and then press ENTER/YES
on the remote twice.
No display
SHUF
The MD in original order.
The tracks on the MD in random
order.
PROGRAM
The tracks on the MD in any
order that you want (see
“Programing the MD tracks” on
page 16).
To cancel erasing
Press MENU/NO on the remote during steps 1
to 4.
3 Press u (or MD N on the remote).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Other operations
You can start playing from the desired track in
Normal Play.
To
Do this
Press . or > repeatedly until the desired track
appears before step 3.
Or, press the number buttons on the remote. The play
automatically starts.
Stop play
Pause
Press x.
Press u (or X on the
remote).
Press again to resume play.
To enter track number over 10
(on the remote only)
Select a track
During play or pause, press
. or > repeatedly
until you find the desired
track.
1 Press >10.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Find a point in a track
During play, press and hold
m or M until you find
the desired point.
Example:
Play repeatedly
(Repeat Play)
Press REPEAT on the
To enter track number 30, press >10, then 3 and 10/0.
remote repeatedly during
play until “REP” or “REP
1” appears in the display.
REP: For all the tracks on
the MD up to 5 times.
REP 1: For only the
currently playing track.
To cancel playing
repeatedly, press REPEAT
repeatedly until “REP” and
“REP 1” disappear from the
display.
Remove the MD
Press MD Z.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
5 To program additional tracks, repeat
Programing the MD tracks
steps 3 and 4.
6 Press u (or MD N on the remote).
— Program Play
To
Do this
You can make a program of up to 25 tracks on
an MD in any order that you want.
Check the program
order
Press . or >
repeatedly during Program
Play.
1 Press FUNCTION repeatedly until “MD”
appears in the display.
Check the total
Press TIME on the remote in
number of programed stop mode. The total number
2 Press PLAY MODE on the remote in
tracks
of programed steps appears,
and then the last programed
track number and the total
playing time of the program.
stop mode repeatedly until
“PROGRAM” appears in the display.
3 Press . or > repeatedly until the
desired track number appears in the
display.
Cancel Program Play
Press x, and then press
PLAY MODE on the remote
repeatedly until
“PROGRAM” and “SHUF”
disappear from the display.
Add a track to the end Do steps 3 and 4 with
of the program
Program Play stopped.
Selected track
number
Playing time of the
selected track
Erase the last
programed track
Press CLEAR on the remote
in stop mode. Each time you
press the button, the last
4 Press ENTER/YES on the remote.
The track is programed.
programed track is erased.
“Step” appears, followed by the order
number of the track just programed. Then
the number of the last programed track
appears, followed by the total playing time
of the program. If you have made a mistake,
you can clear the last programed track from
the program by pressing CLEAR on the
remote.
Program the desired
track using the
number buttons on
the remote
Press number buttons instead
of performing steps 3 to 5.
For details on using number
buttons, see page 15.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, switch
the function to MD, and press u (or MD N on
the remote).
• “---.--” appears when the total MD program time
exceeds 1000 minutes.
Last programed Total playing time
track number
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing tracks in a group
Using the MD display
You can select and play tracks in a group. For
more details on the Group function, see page
27.
Checking the remaining time
Press TIME on the remote repeatedly
during play.
1 Press FUNCTION repeatedly until “MD”
appears in the display.
The display changes as follows:
Elapsed playing time on the current track t
Remaining time on the current track t
Remaining time on the current MD t Elapsed
playing time on the current track t…
2 Press GROUP ON/OFF on the remote in
stop mode.
“GROUP” lights up.
3 Press GROUP SKIP on the remote
repeatedly to select the group that
contains the tracks you want to listen
to.
Checking the total playing
time
Press TIME on the remote repeatedly in
stop mode.
4 Press . or > on the remote
repeatedly to select the track within the
group that you want to listen to.
The display changes as follows:
If you start playback from the first track in
the group, skip this step.
Total number of tracks and total playing time
t Remaining recordable time on the MD*1 t
Total number of tracks and total playing time
t…
*1 In the case of a recordable MD only. The
remaining recordable time on the MD varies
according to the recording mode.
5 Press MD N on the remote.
Play starts and automatically stops at the
end of the last track in the group.
Tip
Shuffle Play, Repeat Play, and Program Play also
function within groups.
continued
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MD — Recording
Using the MD display (continued)
Before you start recording
Checking the track title or a
disc title
Press DISPLAY on the remote during play
or in stop mode.
MDs (Mini Disc) let you digitally record and
play music with high quality sound. Another
feature of MDs is track marking. The track
marking feature lets you quickly locate a
specific point or easily edit the recorded tracks.
However, depending on the source you record,
the recording method and the way the track
numbers are recorded differ.
The display changes as follows:
During normal play
Clock*2 t Preset Equalizer name*2 t
Volume*2 t Playing time of the MD*3 t
Track title*4 t Clock*2 t…
When the source you record from is:
• This system’s CD player
In stop mode
– The MD deck performs digital recording.*1
Clock*2 t Preset Equalizer name*2 t
Volume*2 t Total number of tracks and total
playing time or remaining recordable time of
the MD (only for the recordable MD)*5 t
Disc title*6 t Clock*2 t …
– Track numbers are automatically marked as
on the original CD. However, track numbers
may not be marked for some tracks (see page
56).
*2 After 8 seconds, the playing time of the MD
appears.
*3 During normal play:
• Other digital components
connected to the DIGITAL OPTICAL
IN jack
The track number and elapsed playing time of the
track, track number and the remaining playing time
of the track, or remaining time of the MD is
displayed.
While the group function is activated:
The track number and elapsed playing time of the
track, track number and the remaining playing time
of the track, or remaining time of the group is
displayed.
*4 If the track has no title, the track title is skipped.
*5 While the group function is activated, the total
number of the groups (when a group is not
selected) or total number of the tracks in the group
and total playing time of the group (when a group
is selected).
*6 If the MD has no title, the disc title is skipped.
While the group function is activated, group title is
displayed.
– The MD deck performs digital recording.*1
– Track numbers are marked differently
depending on the source you record.
• This system’s tuner and other
components connected to the TAPE
IN jack
– The MD deck performs analog recording.
– A track number is marked at the beginning
of a recording, but when you turn on the
Level-Synchro Recording function (see page
24), track numbers are automatically marked
in sync with the level of the input signal.
*1 For details on the limitations of digital recording,
see page 56.
To scroll a long name
Press SCROLL on the remote.
The title appears scrolling in the display.
Tip
To label a disc title or track titles to an MD, see
“Labeling an MD” on page 29. To label a group title,
see “Labeling a group” on page 31.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
When you use a partially recorded
MD
Recording a CD on an MD
Recording starts after the recorded tracks.
— CD-MD Synchro Recording/CD-MD
High-Speed Synchro Recording
Note on MD track numbers
On an MD, the track numbers (track sequence), track
start and end point information, etc., are recorded in
the TOC*2 area independent of the sound information.
You can edit recorded tracks quickly by modifying
the TOC information.
In addition to normal-speed recording, you can
make a digital recording of a CD on an MD at
twice the speed of normal CD-MD Synchro
Recording.
*2 TOC: Table Of Contents
1 Load a recordable MD.
2 Load a CD.
After recording
3 Press FUNCTION repeatedly until “CD”
appears in the display.
Press MD Z to remove the MD or press
?/1 (power) to turn off the system.
You can use the Group function with the
CD-MD (High-Speed) Synchro Recording
feature to create new tracks in a group. You
can also add the tracks following previously
recorded group tracks (see page 27).
“TOC” starts flashing. The TOC is updated and
recording is completed.
Before pulling out the power cord
MD recording is completed when the MD
Table of Contents (TOC) is updated. The TOC
is updated when you eject the MD or press ?/1
to turn off the system. Do not pull out the
power cord before updating the TOC (while
“TOC” is lit) or while updating the TOC (while
“TOC” is flashing) to ensure a complete
recording.
4 Press CD SYNC NORMAL.
To record at high speed (CD-MD High-
Speed Synchro Recording), press CD
SYNC HIGH.
“NORMAL SPEED” and “NORM” (or
“HIGH SPEED” and “HIGH” for high-
speed recording) appears. The MD deck
stands by for recording and the CD player
pauses for play.
Protecting a recorded MD
To protect a recorded MD, slide the tab on the
side of the MD to open the slot. In this position,
the MD cannot be recorded. To record on the
MD, slide the tab to close the slot.
5 Press u (or MD N on the remote).
Recording starts. You cannot monitor the
recorded signal during high-speed
recording.
continued
Tab
Slide the tab
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a CD on an MD
(continued)
Recording on an MD
manually
If “Retry” flashes in the display after
you press u (or MD N on the
remote) in step 5
— Manual Recording
A reading failure has occurred, and the system
is trying to read the data again.
With manual recording, you can record a radio
program.
• If the retry was successful, the MD deck
continues with CD-MD High-Speed Synchro
Recording.
Manual recording cannot be done from the CD
unit to the MD unit within the system.
1 Load a recordable MD.
• If the condition of the loaded CD or the
system is poor, and retry fails, CD-MD
High-Speed Synchro Recording is disabled.
In this case, “NORM” flashes in the display
and the MD deck automatically starts
recording in normal CD-MD Synchro
Recording. Note that monitoring of the
recorded signal is not possible when this
occurs.
2 Tune in to the desired station (see
“Listening to the radio” on page 43).
3 Press REC/REC IT.
The MD deck stands by for recording.
4 Press u (or MD N on the remote).
To stop recording
Press x.
To stop recording
Press x.
Tips
• You can record only your favorite CD tracks with
CD Program Play. After step 3, follow the same
procedures as from step 2 to 5 in CD Program Play
(see page 11). Then go to step 4.
• You can switch the recording mode before step 3
and record for long times. For details, see
“Recording for long times” on page 22.
• If you want to record only a portion of a CD track
to an MD, you must first record the entire CD track
(using CD-MD Synchro Recording or Rec It). Then
use the A-B Erase function to erase the unwanted
portions on the MD (see page 35).
Notes
• The following items are either inoperative or cannot
be used during CD-MD Synchro Recording and
CD-MD High-Speed Synchro Recording:
— The Auto Cut function (see page 25)
— The recording level specified in the Setup menu
— Recorded signal monitoring (CD-MD High-
Speed Synchro Recording only).
• You cannot pause recording during CD-MD
Synchro Recording and CD-MD High-Speed
Synchro Recording.
• If you don’t perform step 5 within about 1 minute
after step 4, the system returns to the original
condition.
• The sound does not come from the TAPE OUT jack
during CD-MD High-Speed Synchro Recording.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording the current
track
Starting recording with 6
seconds of prestored
audio data
— Rec It
— Time Machine Recording
You can record a track quickly while listening
to a CD.
When recording from an FM or satellite
broadcast, the first few seconds of material are
often lost due to the time it takes you to
ascertain the contents and press the record
button. To prevent the loss of this material, the
Time Machine Recording feature constantly
stores the most recent audio data in a buffer
memory. This lets you record the sound from 6
seconds before starting recording, as shown in
the illustration below:
1 Load a recordable MD.
2 Press FUNCTION repeatedly until “CD”
appears in the display.
3 Press u (or CD N on the remote).
CD play starts.
4 Press REC/REC IT while listening to a
track you want to record.
Play returns to the start of the track and
recording starts. The MD deck stops
automatically at the end of the track.
When you press
ENTER/YES on the
remote in step 5
End of the
source to be
recorded
To stop recording
Press x.
Time
6 seconds
Note
The following items are either inoperative or cannot
be used during Rec It:
—The Track Mark function
—The Auto Cut function
Recorded
portion
—The recording level specified in the Setup menu
Beginning of the source to be recorded
1 Load a recordable MD.
2 Press FUNCTION repeatedly to select
the desired source to record.
3 Press REC/REC IT.
The MD deck stands by for recording.
4 Start playing the desired source to
record.
5 Press ENTER/YES on the remote at the
desired point to start recording.
continued
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting recording with 6 seconds of
prestored audio data (continued)
Recording tips
To stop Time Machine Recording
Press x.
— Recording for long times/Marking
track numbers/Smart space/
Adjusting the recording level
Note
The MD deck starts storing audio data when the deck
stands by for recording in step 3 and you start playing
the source. If less than 6 seconds have passed when
you press ENTER/YES on the remote, Time Machine
Recording starts with less than 6 seconds of audio
data.
Recording for long times
In addition to normal stereo recording, this
system has two long time modes: LP2 and LP4.
When recording in LP2 mode, you can record 2
times the normal recordable time, and in LP4
mode, you can record 4 times the normal
recordable time. In addition, the recordable
time for monaural recording is approximately
double the stereo recording time.
LP4 Stereo mode (4× long time recording
mode) achieves a long stereo recording time by
use of a special compression system. When
placing emphasis on sound quality, Stereo
recording or LP2 Stereo recording (2× long
time recording mode) is recommended.
Note
MDs recorded in MDLP (LP2 or LP4) mode cannot
be played back on a system that does not support
MDLP mode. In addition, you cannot perform S.F
Edit, etc., for MDs recorded in MDLP mode.
1 Load a recordable MD.
2 Press FUNCTION repeatedly until “MD”
appears in the display.
3 Press MENU/NO on the remote.
4 Press . or > repeatedly until
“Setup?” appears in the display, and
then press ENTER/YES on the remote.
5 Press . or > repeatedly until
“STEREO REC,” “MONO REC,” “LP2
REC,” or “LP4 REC” appears, and then
press ENTER/YES on the remote.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Press . or > repeatedly to select
the recording mode you want, and then
press ENTER/YES on the remote.
To add “LP:” at the beginning of a
track name during MDLP recording
“LP:” appears when you try to play the track on
a system that does not support MDLP mode.
This convenient function lets you know at a
glance that the track cannot be played back.
The factory setting is “On”.
The display changes as follows:
STEREO REC t LP2 REC t LP4 REC
t MONO (Monaural) REC t STEREO
REC t …
7 Press MENU/NO on the remote.
To continue and record, follow the
procedures described on the various
recording pages.
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
2 Press MENU/NO on the remote.
Tip
3 Press . or > repeatedly until
“Setup?” appears in the display, and then
press ENTER/YES on the remote.
The selected recording mode is kept even after
recording has finished, so be sure to check the
recording mode before recording.
4 Press . or > repeatedly until “LP
Stamp On” (or “LP Stamp Off”) appears,
and then press ENTER/YES on the remote.
Notes
• Tracks recorded in MDLP (LP2 or LP4) Stereo
mode cannot be played back on a system that does
not support MDLP mode.
• During recording or recording pause, you cannot
change the recording mode.
5 Press . or > to select the setting, and
then press ENTER/YES on the remote.
To
Select
• Even if you select “MONO REC”, the monitor
signal during recording does not become monaural.
Add “LP”
LP Stamp On (factory
setting)
Cancel adding “LP”
LP Stamp Off
6 Press MENU/NO on the remote.
Notes
• The recorded “LP:” is a stamp which appears to
indicate that the track cannot be played back when
you try to play the track on system that does not
support MDLP mode. It does not appear for systems
that support MDLP mode.
• When set to “On”, “LP:” is recorded as the track
name, so the number of characters that can be input
to an MD is reduced. In addition if you divide an
“LP:” track using the Divide function, “LP:” is also
added to the latter track.
continued
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Recording tips (continued)
You cannot mark track numbers automatically if the
sound source to be recorded is noisy (e.g., tapes or
radio programs).
Marking track numbers
1 Press FUNCTION repeatedly until “MD”
appears in the display.
• Automatically during recording
Track numbers are automatically marked as on
the original source during recording from this
system’s CD player or components connected
to the DIGITAL OPTICAL IN jack. However,
track numbers may not be marked for some
tracks (see page 56). Use the Level Synchro
Recording function to automatically mark track
numbers during recording from this system’s
tuner or components connected to the TAPE IN
jack.
2 Press MENU/NO on the remote.
3 Press . or > repeatedly until
“Setup?” appears in the display, and then
press ENTER/YES on the remote.
4 Press . or > repeatedly until “T.Mark
Off” (or “T.Mark LSync”) appears, and then
press ENTER/YES on the remote.
5 Press . or > repeatedly to select the
setting, and then press ENTER/YES on the
remote.
• At any point during recording
To
Turn on the Level Synchro T.Mark LSync
Recording function
(factory setting)
Select
You can mark track numbers during manual
recording of any source (see page 25).
• After recording
Turn off the Level Synchro T.Mark Off
Recording function
Use the Divide Function (see page 37).
Marking track numbers
automatically during recording
— Level-Synchro Recording
The Level-Synchro Recording function is
factory-set to on, so the track numbers are
automatically marked. If “L-SYNC” does not
appear during recording, turn on the Level-
Synchro Recording as follows. Track numbers
are automatically marked when the input signal
is continuously below a certain level for more
than 2 seconds and then exceeds that level.
When you set the Level Synchro Recording
function, “L-SYNC” lights up.
6 Press MENU/NO on the remote.
To continue and record, follow the
procedures described on the various
recording pages.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the trigger level for
automatic track marking
Do the procedure below to change the signal
level that triggers automatic track marking.
(The factory setting is –50 dB.)
Making a space between
tracks 3 seconds long
— Smart Space
Smart Space: Lets you make the blank
spaces between tracks 3 seconds long
1 Press MENU/NO on the remote during
recording pause to display “Setup?”, and
then press ENTER/YES on the remote.
automatically while recording. If the Smart
Space function is on and there is no sound
input for about 3 seconds or more (but less than
30 seconds) while recording, the MD deck
replaces this silence with a blank of about 3
seconds and continues recording.
2 Press . or > repeatedly until “LS(T)”
appears, and then press ENTER/YES on
the remote.
3 Press . or > repeatedly to select the
level, and then press ENTER/YES on the
remote.
No sound input for less than 30 seconds
Off
You can set the level at any value between
–72 dB and 0 dB, in 2 dB steps.
4 Press MENU/NO on the remote.
On
To cancel automatic track marking
Press . or > repeatedly until “T.Mark
Off” appears in step 5 of the left column, and
then press ENTER/YES on the remote.
Replaced with a blank of about 3 seconds
and recording continues
Auto Cut: When the Smart Space function is
on, if there is no sound input for 30 seconds or
more, the MD deck replaces this silence with a
blank of about 3 seconds and enters recording
pause.
“L-SYNC” disappears. When “L-SYNC” is
off, a track number is marked only at the
beginning of each recording.
Marking track numbers at a specific
point during recording
— Track Mark
You can mark track numbers at any time when
recording to an MD from the tuner or from an
optional component connected to the TAPE IN
or DIGITAL OPTICAL IN jack, regardless of
the type of sound source.
No sound input for 30 seconds or more
Off
On
Press REC/REC IT during recording at the
point you want to add a track mark.
Replaced with a blank of about 3 seconds
and recording pauses
continued
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording tips (continued)
Adjusting the recording level
You can adjust the recording level when
recording to an MD from the tuner or from an
optional component connected to the TAPE IN
or DIGITAL OPTICAL IN jack.
1 Press FUNCTION repeatedly until “MD”
appears in the display.
2 Press MENU/NO on the remote.
1 Press FUNCTION repeatedly to select
3 Press . or > repeatedly until
“Setup?” appears in the display, and
then press ENTER/YES on the remote.
the desired source to record.
2 Press REC/REC IT to stand by for
recording.
4 Press . or > repeatedly until
“S.Space Off” (or “S.Space On”)
appears, and then press ENTER/YES on
the remote.
3 Press MENU/NO on the remote to
display “Setup?”, and then press
ENTER/YES on the remote.
5 Press . or > repeatedly to select
the setting, and then press ENTER/YES
on the remote.
4 Press . or > repeatedly until
“LevelAdjust?” appears, and then
press ENTER/YES on the remote.
To
Select
5 Press . or > to adjust the
Turn on the Smart
Space function
S.Space On (factory
setting)
recording level.
While monitoring the sound, adjust to the
optimum level while making sure that
“OVER” does not appear in the display at
the loudest portion.
Turn off the Smart
Space function
S.Space Off
6 Press MENU/NO on the remote.
To continue and record, follow the
procedures described on the various
recording pages.
6 Press ENTER/YES on the remote.
7 Press MENU/NO on the remote.
8 Press x.
To continue and record, follow the
procedures described on the various
recording pages.
Tip
To restart the recording when “Auto Cut” appears in
the display, press u (or X on the remote).
Tips
• You can also adjust the recording level during
recording.
• Once adjusted, the recording level is maintained
until you adjust it again.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
How group tracks are
registered
Recording CD tracks on
an MD as group tracks
The group function information is registered in
the TOC of the MD as the “disc name” in the
following example.
— Group Function
Example of registration of group
tracks
About Group Function
With the MDLP recording feature, you can
record a number of albums to separate groups
on a single MD, and then play them back and
manage them by means of the display
information that shows the group titles and
each numbered track (each group begins with
track 1). Pressing GROUP ON/OFF on the
remote switches the Group function on and off.
1 The disc name is labeled as
“Favorites.”
2 Tracks 1 to 5 are registered in the
“Rock” group.
3 Tracks 6 to 9 are registered in the
Group function is off
“Pops” group.
MD
Track number
If the MD recorded with the group function on
this system is played on another system that
does not support the group function, the disc
name, including the group information (such as
that in the example above), scrolls across the
display.
Group function is on
MD
Note that if the disc title is edited with the
Name function, the Group function may not
operate properly.
Group 1
Group 2
Track number
Track number
Notes
• The group information is written to the TOC when
the MD is ejected or the system is turned off.
• While the Group function is on, non-group tracks
are not played and non-group track information
does not appear in the display.
Operations using the group function
• The order of groups cannot be changed.
• If group information on an MD is not recorded
properly, it will not be possible to play the MD with
the Group function.
• “Playing tracks in a group” on page 17
• “Labeling a group” on page 31
• “Registering non-group tracks as group
tracks in a newly created group” on page 32
continued
• “Releasing group tracks” on page 33
Note
An MD recorded with the group function in this
system can be played on another system that has the
group function as well. In this case, the function may
operate differently, depending on the recording
method.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording CD tracks on an MD as
group tracks (continued)
Recording into an existing
group
Recording into a new group
1 Do steps 1 to 3 of “Recording a CD on
an MD” on page 19.
You can create new groups by CD album or
artist, etc.
2 Do steps 2 to 5 in “Programming the
CD tracks” on page 11.
1 Do steps 1 to 3 of “Recording a CD on
an MD” on page 19.
3 Press GROUP SKIP on the remote
repeatedly until the group you want to
record in appears.
2 Do steps 2 to 5 in “Programming the
CD tracks” on page 11.
4 Press REC/REC IT.
3 Press GROUP ON/OFF on the remote.
“New Track” flashes and the deck changes
to recording pause.
“GROUP” lights up.
Press TIME to display the remaining
recordable time.
5 Press u.
If “Group Full” appears when you
press REC/REC IT in step 4
4 Press REC/REC IT.
“New Group” flashes and the deck changes
to recording pause.
You cannot start recording because there is
insufficient character space for group
management.
5 Press u.
To continue and record into another new
group, press x repeatedly after the
recording to display the disc name and the
total number of groups, then do steps 4 and
5.
Delete the unnecessary characters (disc name
or track names) until group recording is
possible (see page 31).
Notes
• The recorded tracks is added to the end of the
group.
If “Group Full” appears when you
press REC/REC IT in step 4
You cannot start recording because there is
insufficient character space for group
management.
• When you newly record a track into an existing
group, the track numbers following the newly
recorded track may change when the Group
function is turned off.
• If “Group Full” appears while recording, track
numbers are not marked.
Delete the unnecessary characters (disc name
or track names) until group recording is
possible (see page 31).
Notes
• The new group is added after any existing groups
with tracks registered into them.
• Up to 99 groups can be registered on a single MD.
• If “Group Full” appears while recording, track
numbers are not marked.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
MD — Editing
Before pulling out the power cord
MD editing is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press ?/1
to turn off the system. Do not pull out the
power cord before updating the TOC (while
“TOC” is lit) or while updating the TOC (while
“TOC” is flashing) to ensure a complete
editing.
Before you start editing
Before editing
You can edit an MD only when:
• The MD is recordable.
• The MD play mode is normal play.
Check the following, before editing.
Labeling an MD
1 Check the tab of the MD to be edited.
If the MD is record protected, “C11” and
“Protected” appear alternately and the MD
cannot be edited.
— Name Function
You can create titles for your recorded MDs
and tracks as follows.
Slide the tab to close the slot.
2 Press PLAY MODE on the remote in
During recording
stop mode repeatedly until both
If “TEXT” lights up or flashes during
recording, you can record the CD TEXT
information onto the MD as follows:
“PROGRAM” and “SHUF” disappear.
You can edit the MD only in normal play
mode. You cannot edit the MD in Shuffle or
Program Play.
• Automatically during recording
When “TEXT” is lit, the CD TEXT
information is automatically recorded.
To cancel the last edit (page 39)
Use Undo Function to cancel the last edit and
restore the contents of the MD to the condition
before the edit.
• Manually during recording
When “TEXT” flashes, press NAME EDIT/
SELECT on the remote, and then press
ENTER/YES on the remote to record the
title of the current track.
To quit while editing
Press MENU/NO on the remote.
Note
After editing
Depending on the disc, the CD TEXT information
may not be recorded automatically.
Press MD Z to remove the MD or press ?/1
continued
(power) to turn off the system.
“TOC” starts flashing. The TOC is updated and
editing is completed.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Enter a character.
Labeling an MD (continued)
If you have selected uppercase or
lowercase letters
After recording
1 Press the corresponding letter button on
the remote repeatedly until the
character to be entered flashes.
Use the Name function on this page. You can
enter a total of approximately 1,700 characters
for the disc title, track titles and group titles on
a single MD. Do the procedure below with the
Group function on. To label a group, see
“Labeling a group” on page 31.
Or, press the button once and press .
or > repeatedly.
2 Press CURSORt on the remote.
The flashing character is entered and the
cursor shifts to the right.
Be sure to press GROUP ON/OFF so that the
Group function is on before you label an MD
recorded with the Group function so as not to
overwrite the group information on the MD.
For details, see page 27.
If you have selected numbers
Press the corresponding number button on
the remote.
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
The number is entered and the cursor shifts
to the right.
To enter a blank space
To label a track, press . or >
repeatedly until the desired track number
appears.
1 Press NAME EDIT/SELECT on the
remote to select upper case or lower
case letters.
2 Press NAME EDIT/SELECT on the
2 Press 10/0 on the remote.
A blank space is entered and the cursor
shifts to the right.
remote.
The cursor starts flashing.
3 Press NAME EDIT/SELECT on the
remote repeatedly to select the desired
type of character.
5 Repeat steps 3 and 4 to enter the rest
of the name.
The display changes as follows:
To change a character
Selected AB* (Upper cases) t Selected
ab* (Lower cases) t Selected 12
(Numbers) t Selected AB* (Upper cases)
t …
* Press number 1 repeatedly to display the
following symbols.
Press TCURSOR or CURSORt on the
remote repeatedly until the character to be
changed flashes, press CLEAR on the
remote to erase the character, then repeat
steps 3 and 4.
‘ – / , . ( ) : ! ?
6 Press ENTER/YES on the remote to
In addition, when the symbols above appear in
the display, press . or > repeatedly to
display the following symbols.
complete the labeling procedure.
The titles you labeled appear sequentially,
and then the original display appears.
& + < > _ = ” ; # $ % @
`
Note
You can label a track title during play. The play
repeats until you finish labeling.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the titles
Labeling a group
To check the disc titles, press SCROLL on the
remote in stop mode. To check the track title,
press SCROLL on the remote during play. The
title appears scrolling in the display. To stop
scrolling, press SCROLL on the remote. Press
the button again to resume scrolling.
— Name Function
Labeling a group
You can enter a total of approximately 1,700
characters for the disc title, track titles and
group titles on a single MD.
Erasing the titles
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
2 Press GROUP ON/OFF on the remote in
2 Press MENU/NO on the remote in stop
stop mode.
mode.
“GROUP” lights up.
3 Press . or > repeatedly until “Nm
Erase?” appears, and then press
ENTER/YES on the remote.
3 Press GROUP SKIP repeatedly to select
the group to be labeled.
4 Press . or > repeatedly until the
track number of the track title you want
to erase appears (or “Disc” when you
want to erase the disc title). Then press
ENTER/YES on the remote.
4 Press NAME EDIT/ SELECT on the
remote.
The first character of the group starts
flashing.
5 Follow the same procedures as from
step 3 to 6 in “Labeling an MD” on page
29.
Note
Use of the characters “//” in a disc name may prevent
the Group function from operating.
Note
Use of the characters “//” in a disc name may prevent
the Group function from operating.
continued
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Labeling a group (continued)
Registering non-group
tracks as group tracks in
a newly created group
Erasing a group title
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
— Create Function
Only a series of tracks that have not been
registered to any group can be registered with
this procedure. You can also use this procedure
to register tracks recorded on a system that
does not support the group function.
2 Press GROUP ON/OFF on the remote in
stop mode.
“GROUP” lights up.
3 Press GROUP SKIP on the remote
repeatedly until the group title you want
to erase appears.
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
4 Press MENU/NO on the remote.
“Edit Menu” flashes.
2 Press GROUP ON/OFF on the remote in
stop mode.
5 Press . or > on the remote
repeatedly until “Nm Erase?” appears,
and then press ENTER/YES on the
remote.
“GROUP” lights up.
3 Press MENU/NO on the remote.
“Edit Menu” flashes.
The selected group number (e.g. “Gp 3”)
flashes.
4 Press . or > on the remote
repeatedly until “Gp Create?” appears,
and then press ENTER/YES on the
remote.
6 Press ENTER/YES on the remote.
The default group title appears again
(e.g,.“Group3”).
5 Follow the same procedures as from
step 3 to 6 in “Labeling an MD” on page
29.
Note
You cannot erase the title of a group that contains no
tracks.
6 Press . or > on the remote
repeatedly to search the first track (of
the series of tracks) to be registered.
The selected track number flashes and the
deck starts to play the track for your
confirmation.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Press ENTER/YES on the remote to
Releasing group tracks
enter the selected track.
8 Press . or > on the remote
repeatedly to select the last track (of
the series of tracks) to be registered.
— Release Function
You can cancel the registration of tracks in one
group or all groups at once. (Note that the
tracks themselves in the selected groups will
not be erased.)
The selected track number flashes and the
deck starts to play the track for your
confirmation.
9 Press ENTER/YES on the remote to
enter the selected track.
Releasing group tracks by
group
The deck starts to play the last registered
group track.
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
To create a new group with no
tracks
In step 6, press . or > on the remote
until “None” appears, and then press ENTER/
YES.
2 Press GROUP ON/OFF on the remote in
stop mode.
“GROUP” lights up.
To register a single track
In step 7, press ENTER/YES on the remote
twice.
3 Press GROUP SKIP on the remote
repeatedly until the group you want to
release appears.
Notes
4 Press MENU/NO on the remote.
• You cannot register the same track to two or more
groups.
“Edit Menu” flashes.
• When there are no more non-group tracks on the
MD, “Assign None” appears after step 5.
• A newly created group must be labeled if no non-
group tracks has been registered to it.
• If you do not label the group in step 5, the group
will be labeled with the default title (e.g., Group3)
5 Press . or > on the remote
repeatedly until “Gp Release?”
appears, and then press ENTER/YES on
the remote.
“REL” and the selected group number (e.g.
“Gp 3”) appear.
6 Press ENTER/YES on the remote.
continued
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Releasing group tracks (continued)
Erasing recordings
— Erase Function
Releasing the tracks in all
groups at once
The MD deck lets you erase unwanted tracks
quickly and easily.
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
The three options for erasing recordings are:
• Erasing a single track (Track Erase Function)
• Erasing all tracks (All Erase Function)
2 Press GROUP ON/OFF on the remote in
stop mode.
• Erasing a portion of a track (A-B Erase
Function)
“GROUP” lights up.
3 Press MENU/NO on the remote.
Erasing a single track
— Track Erase Function
“Edit Menu” flashes.
4 Press . or > on the remote
repeatedly until “Gp All REL?” appears,
and then press ENTER/YES on the
remote.
You can erase a track simply by selecting its
track number. When you erase a track, the total
number of tracks on the MD decreases by one
and all the tracks following the erased one are
renumbered.
“All REL??” appears.
5 Press ENTER/YES on the remote.
Example: Erasing track 2.
Erase track 2
Track
number
Original
tracks
1
1
2
3
4
A
A
B
C
D
2
3
After
ERASE
C
D
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
2 Press MENU/NO on the remote to
display “Edit Menu”.
3 Press . or > repeatedly until “Tr
Erase?” appears, and then press
ENTER/YES on the remote.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press . or > repeatedly until the
Erasing a portion of a track
— A-B Erase Function
desired track number appears.
5 Press ENTER/YES on the remote.
You can specify a portion within a track and
erase the portion with ease. You can shift the
desired portion by frame*, minute or second
intervals.
“Complete!” appears.
If you erase all tracks in a group
The group itself will be also erased.
* 1 frame is 1/86 second.
Note
Example: Erasing a portion of track 2.
“Tr Protected” appears in the display when you tried
to erase tracks on an MD that is write-protected.
Point A Point B
Track
number
Original
tracks
1
2
3
Erasing all tracks
— All Erase Function
A
B-A
B-B
B-C
You can erase the disc title, all recorded tracks
and their titles, and all group titles at once.
1
2
3
After
A-B
ERASE
A
B(A+C)
C
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
2 Press MENU/NO on the remote to
display.
display “Edit Menu”.
2 Press MENU/NO on the remote to
3 Press . or > repeatedly until “All
Erase?” appears, and then press
ENTER/YES on the remote.
display “Edit Menu.”
3 Press . or > repeatedly until “A-B
Erase?” appears, and then press
ENTER/YES on the remote.
“All Erase??” appears.
4 Press ENTER/YES on the remote again.
4 Press . or > repeatedly to select
the track you want to erase a portion of
it, and then press ENTER/YES on the
remote.
“Complete!” appears.
Note
By performing the procedure above, even if the group
function is on (and you intended to erase all tracks in
only one group), all tracks on the MD will be erased.
“—Rehearsal—” and “Point A ok?” appear
alternately while the deck plays a portion of
the few seconds before point A.
continued
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing recordings (continued)
Moving recorded tracks
— Move Function
5 While monitoring the sound, press .
or > repeatedly to find the starting
point of the portion to be erased (point
A).
You can use this function to change the order
of any track on the disc. When you move
tracks, the tracks are automatically
renumbered.
You can shift the starting point by 1/86
second (1 frame) intervals*.
Example: Moving track 3 to position 2.
To shift the point by second or minute
intervals, press m or M so that second
or minute flashes, then press . or >.
* You can shift the starting point by 2-frame
intervals (in Monaural mode and LP2 Stereo
mode) or by 4-frame intervals (in LP4 Stereo
mode).
Track
number
Original
tracks
1
1
2
2
3
4
4
A
A
B
C
D
D
3
After
MOVE
6 Repeat step 5 until point A is played
C
B
correctly.
7 Press ENTER/YES on the remote if
point A is correct.
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
“Point B set” appears and play for setting
the ending point of the portion to be erased
(point B) starts.
display.
2 Press MENU/NO on the remote to
display “Edit Menu.”
8 Continue play until the deck reaches
point B, then press ENTER/YES on the
remote.
3 Press . or > repeatedly until
“Move?” appears, and then press
ENTER/YES on the remote.
“A-B Ers” and “Point B ok?” appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
4 Press . or > repeatedly until the
desired track number to move appears,
and then press ENTER/YES on the
remote.
9 Press . or > repeatedly to find
point B.
The procedure is the same as step 5.
10Press ENTER/YES on the remote if
point B is correct.
“Complete!” appears.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press . or > repeatedly until the
Dividing recorded tracks
new track position appears.
— Divide Function
You can use this function to mark track
numbers after recording. The total number of
tracks increases by one and all the tracks
following the divided ones are renumbered.
Original track
number
New track position
6 Press ENTER/YES on the remote.
“Complete!” appears.
Example: Dividing track 2 into two tracks.
Note
Track
If you move a non-group track between two group
tracks, the moved track will be registered to the group
as a group track. (The reverse is also true, as the
status of the moved track is determined by the track
that precedes it.).
number
Original
tracks
1
1
2
2
3
A
A
B
B
C
D
Divide track 2 into
track B and C
3
4
After
DIVIDE
C
D
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
2 Press MENU/NO on the remote to
display “Edit Menu.”
3 Press . or > repeatedly until
“Divide?” appears, and then press
ENTER/YES on the remote.
4 Press . or > repeatedly until the
track number of the track you want to
divide appears. Then, while listening to
rehearsal play, press ENTER/YES on
the remote at the point where you want
to divide the track.
“—Rehearsal—” appears and the portion to
be divided is played repeatedly.
continued
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Dividing recorded tracks (continued)
Combining recorded
tracks
5 While monitoring the sound, press .
or > repeatedly to adjust the point to
be divided.
— Combine Function
You can shift the point by 1/86 second
(1 frame) intervals*.
You can use this function to combine 2 tracks
into a single track. The total number of tracks
decreases by one and all tracks following the
combined ones are renumbered.
To shift the point by second or minute
intervals, press m or M so that second
or minute flashes, then press . or >.
* You can shift the dividing point by 2-frame
intervals (in Monaural mode and LP2 Stereo
mode) or by 4-frame intervals (in LP4 Stereo
mode).
You can also use this function to erase
unnecessary track numbers.
Example: Combining track 3 to track 1.
Track
number
Original
tracks
6 Press ENTER/YES on the remote.
1
1
2
3
4
“Complete!” appears.
A
B
C
C
B
D
Note
If you divide a labeled track (see page 37) into two
tracks, only the first track retains the track title.
2
3
After
COMBINE
A
D
Example:
1
2
3
4
Example: Combining track 1 to track 4.
Andante Adagio
Allegro
4
1
2
3
4
5
4
Original
tracks
B
C
D
D
A
1
2
3
5
Andante Adagio Allegro
1
2
3
After
COMBINE
B
C
A
The new track is not labeled
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
2 Press MENU/NO on the remote to
display “Edit Menu.”
3 Press . or > repeatedly until
“Combine?” appears, and then press
ENTER/YES on the remote.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press . or > repeatedly until the
first track number of the two to be
combined appears, and then press
ENTER/YES on the remote.
Undoing the last edit
— Undo Function
For example, to combine track 1 to 4, select
4.
You can use this function to cancel the last edit
and restore the contents of the MD to the
condition before the edit.
5 Press . or > repeatedly until the
second track number of the two to be
combined appears.
Note, however, that you cannot undo an edit if
you do any of the following after the edit:
• Do another edit.
• Start recording.
• Update the TOC by turning off the system or
ejecting the MD.
Second track number New track number
to be combined
• Disconnect the power cord.
6 Press ENTER/YES on the remote.
You cannot undo the S.F Edit Function even if
you use the Undo Function.
“Complete!” appears.
Notes
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
• Tracks recorded in different recording modes
(STEREO, LP2, LP4 or MONO) cannot be
combined.
• If both of the combined tracks have track titles, the
title of the second track is erased.
2 Press MENU/NO on the remote in stop
mode to display “Edit Menu.”
• If two tracks registered to different groups are
combined, the second track is registered to the
group in which the first track is registered. (The
status of the second track is determined by the
status of the first track.).
3 Press . or > repeatedly until
“Undo?” appears in the display.
“Undo?” does not appear, when there is no
editing function that can be canceled.
4 Press ENTER/YES on the remote.
A message appears, depending on the last
edit.
5 Press ENTER/YES on the remote again.
“Complete!” appears.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Press . or > repeatedly to select
the track number you want to change
the recording level of, and then press
ENTER/YES on the remote.
Changing the recording
level after recording
“Level 0dB” appears.
— S.F Edit
7 While monitoring the sound, press .
or > repeatedly to change the
recording level.
You can change the volume of the recorded
tracks using S.F (Scale Factor) Edit. The
original track is recorded over at the new
recording level. When changing the recording
level, you can select Fade-in Recording to
gradually increase the signal level at the start of
recording, or Fade-out Recording to gradually
decrease the signal level at the end of the
recording.
The recording level can be adjusted from
–12 dB to +12 dB in 2 dB increments.
Adjust the recording level so as not to light
up “OVER” at the strongest sound.
8 Press ENTER/YES on the remote.
“S.F Edit OK?” appears.
You cannot change the recording level of the
track recorded in MDLP mode.
9 Press ENTER/YES on the remote.
“S.F Edit: **%” appears while the track is
being recorded. An amount of time that is
roughly equal to or longer than the playing
time of the track is required when recording
over the track. When the recording finishes,
“Complete!” appears for a few seconds.
Changing the overall
recording level of a track
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
To cancel the operation
Press MENU/NO on the remote during steps 4
through 8. If you press ENTER/YES on the
remote in step 9 and start recording, you cannot
interrupt the operation.
2 Press PLAY MODE on the remote
repeatedly until both “PROGRAM” and
“SHUF” disappear.
3 Press MENU/NO on the remote to
display “Edit Menu.”
4 Press . or > repeatedly until “S.F
Edit?” appears in the display, and then
press ENTER/YES on the remote.
5 Press . or > repeatedly until “Tr
Level?” appears in the display, and
then press ENTER/YES on the remote.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the operation
Fade-in and Fade-out
Recording
Press MENU/NO on the remote during steps 4
through 8. After recording starts in step 9, you
cannot interrupt the operation.
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
Notes
• Do not disconnect the power cord or move the
system while recording is in progress. This may
damage the recording data, preventing recording
from being performed properly.
• Do not use an MD that is damaged or dirty, this
may prevent data from being recorded properly.
• Repeatedly changing the recording level results in
poor sound quality.
2 Press PLAY MODE on the remote
repeatedly until both “PROGRAM” and
“SHUF” disappear.
3 Press MENU/NO on the remote to
display “Edit Menu.”
4 Press . or > repeatedly until “S.F
Edit?” appears in the display, and then
press ENTER/YES on the remote.
• The recording level will not return to the exact
original level once the recording level has been
changed even if it is returned to the original level.
• While the timer is activated, you cannot change the
recording level.
5 Press . or > repeatedly until
“Fade In?” or “Fade Out?” appears in
the display, and then press ENTER/YES
on the remote.
• You cannot undo the S.F Edit Function even if you
use the Undo Function.
6 Press . or > repeatedly to select
the track number you want to Fade-in
or Fade-out, and then press ENTER/
YES on the remote.
“Time 5.0s” appears.
7 While monitoring the sound, press .
or > repeatedly to change the Fade-
in, or Fade-out recording time.
The system plays the portion that will be
recorded over using the Fade-in or Fade-out
Recording. You can set the time at any
value between 1.0 second and 15.0 seconds
in 0.1-second increments. You cannot set
the time longer than the track.
8 Press ENTER/YES on the remote.
“S.F Edit OK?” appears.
9 Press ENTER/YES on the remote.
“S.F Edit: **%” appears while the track is
being recorded. When the recording
finishes, “Complete!” appears for a few
seconds.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
To cancel presetting
Press MENU/NO on the remote during steps 5
and 6.
Presetting radio stations
The system can store a total of 30 preset
stations (20 for FM and 10 for AM).
To tune in a weak station
In step 2, press TUNING MODE on the remote
repeatedly until “MANUAL” appears in the
display, then press TUNING + or – repeatedly
to tune in the station.
1 Press FUNCTION (or TUNER BAND on
the remote) repeatedly to select FM or
AM.
To change the preset number
Start over from step 1.
2 Press TUNING MODE on the remote
repeatedly until “AUTO” appears in the
display.
To change the AM tuning interval
(not applicable on the European
model)
The AM tuning interval is factory-preset to 9 kHz (or
10 kHz for some areas). To switch the AM tuning
interval, tune in any AM station first, then turn off the
system. Pressing and holding down FUNCTION turn
the system back on. When you change the interval, all
the AM preset stations are erased. To change back to
the original interval, repeat the same procedure.
3 Press TUNING + or –.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for stereo
program only) appear.
4 Press MENU/NO on the remote.
5 Press TUNING + or – repeatedly until
“Memory?” appears, and then press
ENTER/YES on the remote.
Tip
The preset stations are saved in the system’s memory
for about a day even if you disconnect the power cord
or a power failure occurs.
A preset number appears in the display.
Perform steps 6 and 7 while the preset
number is flashing.
6 Press TUNING + or – repeatedly to
select the desired preset number.
7 Press ENTER/YES on the remote.
“Complete!” appears, and then the station is
stored.
8 Repeat steps 1 through 7 to preset
other stations.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
To tune in a non-preset radio station
Listening to the radio
• In step 2, press TUNING MODE on the
remote repeatedly until “MANUAL” appears
in the display, and then press TUNING + or
– repeatedly to tune in the desired station
(Manual Tuning).
— Preset Tuning
Presetting radio stations in the system’s
memory in advance make it easy to tune in
those stations later (see “Presetting radio
stations” on page 42).
• In step 2, press TUNING MODE on the
remote repeatedly until “AUTO” appears in
the display, and then press TUNING + or
–. The frequency indication changes and the
scanning stops when the system tunes in a
station (Automatic Tuning).
1 Press FUNCTION (or TUNER BAND on
the remote) repeatedly to select FM or
AM.
2 Press TUNING MODE on the remote
repeatedly until “PRESET” appears in
the display.
To cancel Automatic Tuning
Press TUNING MODE on the remote.
3 Press TUNING + or – repeatedly to
Tips
select the desired station .
• If there is static during an FM broadcast, press FM
MODE on the remote repeatedly until “MONO”
appears in the display. The broadcast will no longer
be in stereo, but the reception will improve.
• To improve the reception, adjust the supplied
antennas or connect an external antenna.
The preset number and the frequency (or
station name*1 or RDS station name*2)
appear.
*1 The station name appears only if you have
labeled the station (see page 44).
*2 European model only
To turn off the radio
Press ?/1.
To enter preset number over 10
(on the remote only)
1 Press >10.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
To enter preset number 20, press >10, then 2 and
10/0.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Labeling the preset
stations
Using the Radio Data
System (RDS)
(European model only)
— Station Name
What is the Radio Data System?
You can label each preset station with up to 10
characters (Station Name).
Radio Data System (RDS)*1 is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal.
1 Tune in the desired station you want to
label (see page 43).
2 Follow the same procedures as from
step 2 to 6 on “Labeling a CD” (see
page 13).
Note
RDS may not work properly if the station you have
tuned in is not transmitting the RDS signal properly
or if the signal is weak.
*1 Not all FM stations provide RDS service, nor do
they all provide the same type of services. If you
are not familiar with the RDS system, check with
your local radio stations for details on RDS
services in your area.
Checking the station name
Press DISPLAY on the remote repeatedly.
The display changes as follows:
Station name*1 t Frequency*2 t Clock*2 t
Preset Equalizer name*2 t Volume*2 t
Station name*1 t ...
Receiving RDS broadcasts
*1 The station name is skipped if the station is
unlabeled.
*2 After appearing for 8 seconds, the display will
revert back to the station name (or to the frequency
if the station is unlabeled).
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name appears in the
display.
To check the RDS information
Each time you press DISPLAY on the remote,
the display changes as follows:
Station name*2 t Frequency t Clock t
Preset Equalizer name t Volume t Station
name*2 t …
To erase the station name
1 Tune in the station.
2 Press NAME EDIT/SELECT on the remote.
3 Press CLEAR on the remote repeatedly to
erase the name.
*2 If the RDS broadcast is not properly received, the
station name may not appear in the display.
4 Press ENTER/YES on the remote.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustment
Timer
Reinforcing the bass
sound
Falling asleep to music
— Sleep Timer
— DBFB
The Sleep Timer Function lets you specify a
sleep time, after which the system stops playing
and turns off automatically. You can thus fall
asleep to music.
Press DBFB* on the remote.
“DBFB” appears in the display.
Press again to cancel DBFB.
* DBFB: Dynamic Bass Feedback
Press SLEEP on the remote repeatedly.
The sleep time changes as follows:
Tip
AUTO* t 90min t 80min t 70min t …
DBFB is factory set to on.
t 10min t SLEEP OFF t AUTO* t …
* The system turns off after the current CD or MD
finishes playing (up to 4 hours). The system also
turns off when you manually stop the CD or MD.
Selecting the Preset
Equalizer menu
To
Press
Check the remaining
sleep time
SLEEP on the remote once.
The Preset Equalizer enables you to select the
sound characteristic among 5 sound effects
according to the type of music you are listening
to.
Change the sleep time
SLEEP on the remote
repeatedly until the time
you want appears.
Cancel the Sleep
Timer Function
SLEEP on the remote
repeatedly until “SLEEP
OFF” appears.
Press PRESET EQ on the remote
repeatedly.
The display changes as follows:
Note
ROCK t POP t JAZZ t CLASSIC t
DANCE t FLAT t ROCK t …
Do not set to “AUTO” during Synchro Recording on
an MD.
To cancel the Preset Equalizer
Press PRESET EQ on the remote repeatedly
until “FLAT” appears.
Tips
• The Preset Equalizer menu is factory-set to
“ROCK.”
• The Preset Equalizer effect is not recorded on an
MD or tape.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Press . or > on the remote
repeatedly until the music source you
want appears.
Waking up to music
— Daily Timer
The display changes as follows:
t TUNER y MD PLAY T
By setting the Daily Timer, you can make the
system automatically turn on and off at
specified times. To use this function, make
sure that you have set the system clock
correctly (see “Setting the time” on page 8).
t CD PLAY T
8 Press ENTER/YES on the remote.
The starting time, the stopping time, the
music source, and the volume appear in
turn, then the original display returns.
1 Prepare the music source you want to
listen to when the system turns on.
9 Press @/1 to turn off the system.
• CD: Load a CD. To start playing from a
specific track, make a program (see
“Programing the CD tracks” on page 11).
• MD: Load an MD. To start from a
specific track, make a program (see
“Programing the MD tracks” on page 16).
• Radio: Tune in the preset radio station
that you want (see “Listening to the radio”
on page 43).
2 Press VOL + or – to adjust the volume.
3 Press CLOCK/TIMER SET on the
remote.
4 Press . or > on the remote
repeatedly until “DAILY SET?” appears,
and then press ENTER/YES on the
remote.
The hour indication flashes.
5 Set the starting time.
Press – or + (. or >) on the remote
repeatedly to set the hour, and then press
ENTER/YES on the remote.
The minute indication begins flashing next.
Press – or + (. or >) on the remote
repeatedly to set the minute, and then press
ENTER/YES on the remote.
The hour indication flashes again.
6 Set the stopping time by repeating step
5.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
To
Do this
Timer recording radio
programs
Check the settings/ Press CLOCK/TIMER
activate the timer
SELECT on the remote and
press . or > on the
remote repeatedly until
“DAILY SELECT?” appears in
the display, and then press
ENTER/YES on the remote.
Before recording with the timer, make sure that
you have set the system clock correctly (see
“Setting the time” on page 8) and preset the
radio station (see “Presetting radio stations” on
page 42).
Change the setting Start over from step 1.
Turn off the timer
Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly until
“TIMER OFF?” appears in the
display, and then press
1 Tune in the desired preset radio station
(see “Listening to the radio” on page
43).
2 Press CLOCK/TIMER SET on the
ENTER/YES on the remote.
remote.
Notes
3 Press . or > on the remote
repeatedly until “REC SET?” appears in
the display, and then press ENTER/YES
on the remote.
• The system will turn on 30 seconds before the
specified starting time. Do not operate the system
from the time the system turns on until the daily
timer starts. Otherwise the timer will not be
activated correctly.
• You cannot use the optional component connected
to TAPE IN jack or DIGITAL OPTICAL IN jack as
the sound source for Daily Timer.
4 Press . or > on the remote
repeatedly to select one of “REC 1” to
“REC 3”, and then press ENTER/YES
on the remote.
5 Press . or > on the remote
repeatedly until “ONCE?”, “DAILY?” or
“WEEKLY?” appears.
If you select “ONCE?”, the recording timer
activates only once. If you select
“DAILY?”, the timer activates at the same
time every day. If you select “WEEKLY?”,
the timer activates at the same time on the
set day of every week.
6 Press ENTER/YES on the remote.
If you select “ONCE?” or “WEEKLY?”,
the day indication starts flashing. If you
select “DAILY?”, the hour indication starts
flashing.
continued
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer recording radio programs
(continued)
To
Do this
Check the settings
Select the timer number (REC
1 to 3) in step 2 of “Activate/
Cancel the timer”, then press
ENTER/YES on the remote.
The last setting appears.
7 Press – or + (. or >) on the
remote repeatedly to select the desired
day.
If you select “DAILY?” in step 5, proceed
to step 9.
Activate/Cancel
the timer
1 Press CLOCK/TIMER
SELECT on the remote, then
press . or > on the
remote repeatedly until “REC
SELECT?” appears and press
ENTER/YES on the remote.
2 Press m or M on the
remote repeatedly to select
the timer number (REC 1 to
3), then press . or > on
the remote repeatedly to
select the timer number (set)
or “–” (cancel) and press
ENTER/YES on the remote.
If you have not set the
8 Press ENTER/YES on the remote.
The hour indication flashes.
9 Set the starting time.
Press – or + (. or >) on the remote
repeatedly to set the hour, and then press
ENTER/YES on the remote.
The minute indication begins flashing next.
Press – or + (. or >) on the remote
repeatedly to set the minute, and then press
ENTER/YES on the remote.
recording timer, “.” appears
instead of the timer number
or “–”.
The day indication or the hour indication
flashes again.
10Set the stopping time by repeating
Change the setting Start over from step 1.
steps 7 to 9.
11Select the recording mode (e.g., LP2)
by pressing . or > on the remote,
and then press ENTER/YES on the
remote.
The timer recording settings appear, then
the original display returns.
12Load a recordable MD.
13Press @/1 to turn off the system.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Components
Tip
When you record from the radio, the station name
(see page 44, or frequency when the station is not
labeled), the start time and the stop time are
automatically recorded on the MD.
Hooking up the optional
components
Notes
You can connect a variety of components to
your system in order to enhance it. When you
connect the system to a personal computer, see
page 51.
• The system will turn on 30 seconds before the
specified starting time. Do not operate the system
from the time the system turns on until the
recording starts. Otherwise the timer will not be
activated correctly.
• When you record on a brand-new MD, the first 15
seconds are not recorded.
• The volume is reduced to minimum during
recording.
To the headphones
To the digital optical
To the audio input
output jack of a digital
of a tape deck*1
component*2
• If you made a timer recording with group function,
the radio programs are recorded into a new group if
you did not specify a destination group.
To the audio output of
a tape deck*1
*1 Use an audio cord (stereo miniplug y phono
plugs) (not supplied) or a plug adapter (stereo
miniplug y phono jacks) (not supplied).
*2 Use a digital optical connecting cable (square
connector) (not supplied).
continued
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
Hooking up the optional components
(continued)
• You can adjust the recording level after pressing
REC/REC IT (see page 26).
• You can record from a connected component with
the Smart Space function, Auto Cut function (see
page 25), and Time Machine recording function
(see page 21) operating.
• Thanks to the built-in sampling rate converter, you
can make a digital-to-digital recording to an MD
from a connected digital component with a
sampling frequency of 32 kHz, 44.1 kHz, or
48 kHz.
To
Do This
Listen to the
connected digital
component
Press FUNCTION repeatedly
until “OPTICAL IN” appears
in the display.
Record from a
connected digital
component to an MD in the display.
Load a recordable MD, and
Press FUNCTION repeatedly
until “OPTICAL IN” appears
then start playing the digital
component.
Note
Be sure to insert the plugs firmly, pushing them in all
the way. No sound will be produced if the plugs are
not inserted securely.
Press REC/REC IT to place
the unit into recording
standby, and then press u at
the point where you want to
start recording.
To stop recording, press x.
Record from a
connected digital
While listening to the digital
component, start recording on
component to a tape the tape deck.
deck.
Listen to the
Press FUNCTION repeatedly
connected tape deck until “TAPE” appears in the
display.
Record from the tape Press FUNCTION repeatedly
deck to an MD
until “TAPE” appears in the
display.
Load a recordable MD, and
then start playing the tape on
the tape deck.
Press REC/REC IT to place
the unit into recording
standby, and then press u at
the point where you want to
start recording.
To stop recording, press x.
Listen with
headphones.
Connect headphones
(optional) to the PHONES
jack.
Listening to the audio See page 52.
from the connected
personal computer
Operate the system
from a personal
computer
See pages 52 and 53.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Personal Computer
1 Select [Settings] from the Windows
[Start] menu, then click [Control Panel].
Connecting a personal
computer to the system
2 Double-click [System] in the Control
Panel.
3 Only for Windows 2000
Use the supplied USB cable for the connection.
You can listen to the audio recorded in the
computer’s hard disc or on a CD-ROM loaded
on the CD-ROM drive through the systems
speakers. And also you can operate the system
from the connected personal computer installed
the supplied software (M-crew for CMT-C7NT
or OpenMG Jukebox for Sony Net MDs).
Double-click [Hardware] tab.
4 Click the [Device Manager] tab (button
for Windows 2000).
5 Make sure that the following items are
listed in the Device Manager window.
• [SONY PCLK USB Driver]
• [Net MD] (only when the Net MD
function is activated by pressing NET
MD) under [Universal Serial Bus
controllers]
Personal computer
To the USB port on
a computer
• [USB Compatible Device] ([USB
Composite Device] for Windows 2000),
[Generic USB Hub] under [Universal
Serial Bus controllers]
Supplied
CMT-C7NT
USB cable
• [USB Audio Device] under [Sound,
video and game controllers]
To the USB port
Notes
• When you connect the supplied USB cable to your
computer, a driver installation may start
automatically. If “Windows cannot locate the
driver” appears, reinstall the device driver (see page
59).
• Do not use a bus-powered USB hub to connect the
system to the computer.
• It is recommended that you disconnect the USB
cable from the system while it is not in use.
To verify the status of the installed
device driver
If you connect a computer to the system, four
device drivers will be installed automatically.
Be sure to check the status of the installed
device before operating the system on the
connected computer.
(Example for Windows 2000)
continued
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a personal computer to
the system (continued)
About the supplied
M-crew for CMT-C7NT
If you do not see these items or if a "!"
is displayed on top of any of the icons,
it means the respective device driver is
not installed or recognized by the OS.
In this case, install the device driver
again.
M-crew is software that allows you to operate
the system from a computer installed with the
software and connected to the system through a
USB cable. For details on the installation and
operation of M-crew, refer to the online help
and the instruction manual for M-crew.
6 Click [OK] to close the dialogue.
Note
Be sure to install the M-crew software to your
computer before connecting the system to your
computer. If you are reinstalling the software, be sure
to disconnect the USB cable before starting the
installation.
Listen to the connected
personal computer
Be sure to check the connection of the system
and the personal computer.
1 Press FUNCTION repeatedly until
“USB” appears in the display.
2 Start playing content using the
software (Windows Media Player, etc.)
installed in the personal computer.
Be sure to turn up the volume moderately
with the software and adjust the volume on
the system.
Note
You cannot record the audio from the connected
computer when “USB” appears in the display.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
About the supplied
OpenMG Jukebox for Sony
Net MDs
• While the Net MD function is on, you cannot
change the sound source, operate the system except
for ejecting the MD with MDZ, or turn the system
off with `/1 (if you press `/1, “Net MD NOW”
appears). To turn off the system, press NET MD to
turn off the Net MD function, and then press `/1.
• You cannot use the Net MD function while the
timer is on.
• When “Check USB” appears in the display, check
the USB connection of the system and the personal
computer.
• “CONNECT” appears in the display while you are
checking-in/out tracks with OpenMG Jukebox for
Sony Net MDs. In this case, do not disconnect the
supplied USB cable. For details on check-in/out,
refer to the online help of OpenMG Jukebox.
OpenMG Jukebox for Sony Net MDs is a
software application that utilizes Sony
Corporation’s copyright protection technology,
“OpenMG.” It allows users to store and play
digital music content on the hard disc drive of a
computer, and to transfer digital audio files
from the hard drive to an MD for portable
listening.
For details on the installation and basic
operation of OpenMG Jukebox for Sony Net
MDs, refer to the instruction manual for
OpenMG Jukebox for Sony Net MDs. For
details on the advanced operation of OpenMG
Jukebox for Sony Net MDs, refer to the online
help for OpenMG Jukebox for Sony Net MDs.
Note
Be sure to install the OpenMG Jukebox for Sony Net
MDs software to your computer before connecting
the system to your computer. If you are reinstalling
the software, be sure to disconnect the USB cable
before starting the installation.
Using OpenMG Jukebox for
Sony Net MDs
1 Press NET MD.
The Net MD function is activated and “Net
MD” appears.
2 Start up and operate OpenMG Jukebox
for Sony Net MDs on the personal
computer.
3 Quit OpenMG Jukebox for Sony Net
MDs after use.
4 Press Net MD to turn off the Net MD
function.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
On heat buildup
• Although the unit heats up during operation, this is
not a malfunction.
• To prevent heat build-up in the system, place the
system in a location with adequate ventilation and
refrain from placing anything on the top of the
cabinet.
If you continuously use this system at a large volume,
the cabinet temperature of the top, side and bottom
rises considerably. To avoid burning yourself, do not
touch the cabinet.
Precautions
The nameplate is located on the bottom exterior.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Discard used
batteries according to the manufacturer’s instructions.
To prevent a malfunction, do not cover the ventilation
hole for the cooling fan.
On operating voltage
Before operating the system, check that the operating
voltage of your system is identical with the voltage of
your local power supply.
On operation
• If the system is brought directly from a cold place
to a warm place, or is placed in a very damp room,
moisture may condense on the lens inside the CD
player or the MD deck. Should this occur, the
system will not operate properly. Remove the CD or
MD and leave the system turned on for about an
hour until the moisture evaporates.
On safety
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.
• Unplug the system from the wall outlet (mains) if it
will not be used for an extended period of time. To
disconnect the power cord (mains lead), pull it out
by the plug. Never pull the cord itself.
• When moving the unit, remove any disc that may be
in the system.
• Should any solid object or liquid fall into the
system, unplug the system and have it checked by
qualified personnel before operating it any further.
• AC power cord must be changed only at the
qualified service shop.
If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.
On the speaker system
Although this speaker system is magnetically
shielded, there may be cases where the picture on
some TV sets becomes magnetically distorted. In
such a case, turn off the power of the TV set once,
and after 15 to 30 minutes turn it on again.
On placement
• Do not place the system in an inclined position.
• Do not place the system in locations where it is:
— Extremely hot or cold
— Dusty or dirty
— Very humid
If there seems to be no improvement, locate
the speaker system further away from the TV set.
Also, be sure not to place objects in which magnets
are attached or used near the speaker system, such as
audio racks, TV stands, and toys. These may cause
magnetic distortion to the picture due to their
interaction with the system.
— Subject to vibrations
— Subject to direct sunlight
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on MDs
• If you try to force the shutter open, the disc may be
damaged. If the shutter opens, close it immediately
without touching the disc inside.
• Affix the label supplied with the disc only to the
specified label indentation. Do not affix the label
around the shutter or in other locations. Note that
the shape of the indentation depends on the disc.
Notes on CDs
• Before playing a CD, clean the CD surface with a
cleaning cloth. Wipe the CD from the center out.
• Do not play a CD with tape, stickers, or adhesives
on any of its surfaces as this may damage the
system.
• Do not use solvents.
• Do not expose the CDs to direct sunlight or heat
sources.
• Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this system. Attempting to
do so may damage the system. Do not use such
discs.
Label
position
Shutter
Note on CD-R/CD-RW play
Discs recorded on CD-R/CD-RW drives may not be
played back because of scratches, dirt, recording
condition or the drive’s characteristics. Besides, the
discs, which are not yet finalized at the end of
recording, cannot be played back.
• Wipe the disc cartridge with a dry cloth to remove
dirt.
• Do not expose the MD to direct sunlight or heat
sources such as hot air ducts, nor leave it in a car
parked in direct sunlight.
Notes on speakers
• Although the rear side of the speakers heats up
during operation, this is not a malfunction.
If you continuously use this system at a large volume,
the temperature of the rear side of the speakers rises
considerably. To avoid burning yourself, do not touch
the rear side of the speakers.
• With the following kinds of CDs, you may
experience a reading failure or noise when recorded
on an MD:
—CDs with adhesive labels attached to them.
—Irregularly shaped CDs (for example, heart- or
star- shaped).
—CDs with printed text concentrated on one side
only.
—Old CDs.
—Scratched CDs.
—Dirty CDs.
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as thinner, benzene or alcohol.
—Warped CDs.
• If the following occurs during CD play or
recording, a reading error may occur or noise may
be produced in the recorded results:
—The system is bumped.
—The system is placed on an uneven or soft
surface.
—The system is located near a speaker, door, or
other source of vibration.
• If a reading error occurs, an extra track with no
sound may be created. This extra track can be
erased by using the editing function (see page 34).
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Some tracks cannot be combined
with others
System limitations of MDs
Tracks may not be combined if they have been edited.
The recording system in your MD deck has the
limitations described below.
Note, however, that these limitations are due to the
inherent nature of the MD recording system itself, not
to mechanical causes.
The total recorded time and the
remaining time on the MD do not add
up to the maximum recording time
Recording is done in minimum units of 2 seconds*
each, no matter how short the material. The recorded
contents may be shorter than the maximum recording
capacity. Disc space may also be reduced by
scratches.
* During stereo recording. (approximately 4 seconds
during monaural and LP2 stereo recording, or 8
seconds during LP4 stereo recording)
“Disc Full!” appears before the MD
has reached the maximum recording
time
When 255 tracks have been recorded on the MD,
“Disc Full!” appears regardless of the total recorded
time. More than 255 tracks cannot be recorded on the
MD. To continue recording, erase unnecessary tracks
or use another recordable MD.
The sound may drop-out while
searching the edited tracks
Tracks created through editing may exhibit sound
dropout during searching because high-speed play
requires time to search for the position on the disc
when the tracks are not in order.
“Disc Full!” appears before the
maximum number of tracks (255) is
reached
Fluctuations in emphasis within tracks are sometimes
interpreted as track intervals, increasing the track
count and causing “Disc Full!” to appear.
Track numbers cannot be marked
When “L-SYNC” (page 24) lights up in the display
window during analog recording, the track numbers
may not be marked at the beginning of the track:
• if the input signal is below a certain fixed level for
less than 2 seconds between tracks.
• if the input signal is below a certain fixed level for
more than 2 seconds in the middle of the track.
• if you record a track that is 4 seconds or less*.
* During Stereo, Monaural or LP2 Stereo recording
mode. (In LP4 Stereo recording mode: 8 seconds
or less)
“Group Full!” appears during editing
tracks
• While the Group function is on, "Group Full!" may
appear when you try to edit a track. If it does, there
is not enough space in the TOC of the MD for
group registration. Erase the unnecessary disc titles
or track titles on the MD, and then try editing again.
• Even if the Group function is off, "Group Full!"
may appear when you try to move or divide a track.
This is because group information has been
overwritten as a result of the editing.
Extra tracks are created
When there is a long silence between CD tracks, an
extra track may be created.
The remaining recording time does
not increase even after erasing
numerous short tracks
Tracks shorter than 12 seconds* are not counted, so
erasing them may not increase the recording time.
* During stereo recording. (approximately 24 seconds
during monaural and LP2 stereo recording, or 48
seconds during LP4 stereo recording)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the Serial Copy
Management System
Troubleshooting
Digital audio components, such as CDs, MDs, and
DATs let you copy music easily with high quality by
processing music as a digital signal.
If you have any problem using this system, use
the following checklist.
To protect the copyrighted music programs, this
system uses the Serial Copy Management System that
allows you to make only a single copy of a digitally
recorded source through digital-to-digital
connections.
You can make only a first generation copy*
through a digital-to-digital connection.
That is:
First, check that the power cord is connected
firmly and that the speakers are connected
correctly and firmly.
Should any problem persist, consult your
nearest Sony dealer. When bringing the system
in for servicing, be sure to bring the speaker
system (SA-C7) along with the main unit
(HCD-C7NT).
1 You can make a copy of a commercially
available digital sound program (for example,
a CD or MD), but you cannot make a second
copy from the first-generation copy.
General
2 You can make a copy of a digital signal from a
digitally recorded analog sound program (for
example, an analog record or a music
cassette tape) or from a digital satellite
broadcast program, but you cannot make a
second copy.
* A first-generation copy means a digital recording of
a digital signal made on digital audio equipment.
For example, if you record from this system’s CD
player to the MD deck, you make a first-generation
copy.
There is no sound.
• Adjust the volume.
• Make sure the headphones are not connected.
• Check the speaker connections (see page 6).
• There is no sound output during CD-MD High-
Speed Synchro Recording.
Sound comes from one channel, or unbalanced
left and right volume.
• Connect the speaker cords properly (see page 6).
• Place the speakers as symmetrically as possible.
• Connect the supplied speakers.
There is severe hum or noise.
• Move the system away from the source of noise.
• Connect the system to a different wall outlet.
• Install a noise filter (commercially available) to
the power line.
“– –:– –” appears in the display.
• Set the clock again (see page 8).
The timer cannot be set.
• Set the clock again (see page 8).
continued
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (continued)
The sound skips.
• Wipe the CD clean (see page 55).
• Replace the CD.
The timer does not function.
• Try moving the system to a place without
vibration (e.g., on top of a stable stand).
• Press CLOCK/TIMER SELECT on the remote
and light up “cDAILY” or “cREC” in the
display (see pages 47 and 48).
• Try moving the speakers away from the system,
or placing them on separate stands.
• Check the set contents and set the correct time
(see page 8 or 46 to 49).
When you listen to a track with bass sounds at
high volume, the speaker vibration may cause the
sound to skip.
• Cancel the Sleep Timer function (see page 45).
• You cannot activate Daily Timer and recording
timer at the same time.
Play does not start from the first track.
• Press PLAY MODE on the remote repeatedly
until “PROGRAM” or “SHUF” disappears to
return to normal play.
• After you have set the timer, make sure to press
`/1 to turn off the system.
• The system is on about 30 seconds before the
preset time.
“—OVER—” appears.
• Press and hold m or press . to return to the
desired playing position.
The remote does not function.
• Remove the obstacle.
• Move the remote closer to the system.
• Point the remote at the system’s sensor.
• Replace the CR2025 battery.
MD Deck
• Locate the system away from the fluorescent
light.
An MD cannot be loaded.
• Load the MD with the arrow side up and the
arrow pointing toward the deck.
The controls do not work.
CD Player
• Replace the MD with a new one.
• Retry the operations after “TOC” turns off.
The CD does not eject.
• Press and hold CD Z.
Play does not start.
• Consult your nearest Sony dealer.
• Replace the MD.
• Insert the MD and leave the system turned on for
a few hours until the moisture evaporates.
Play does not start.
• Load a CD.
• Press NX to start play.
• Wipe the CD clean (see page 55).
• Replace the CD.
• You cannot use the Group function when there
are no group tracks.
Press GROUP ON/OFF to turn off “GROUP.”
• The CD is loaded with the label side down. Load
the CD correctly.
• Remove the CD and wipe away the moisture on
the CD, then leave the system turned on for a
few hours until the moisture evaporates.
• Press NX to start play.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
The sound skips.
• Replace the MD.
There is severe hum or noise (“TUNED” or
“STEREO” flashes).
• Try moving the system to a place without
vibration (e.g., on top of a stable stand).
• Set the proper band and frequency (see page 42).
• Connect the antenna properly (see page 6).
• Try moving the speakers away from the system,
or placing them on separate stands.
• Find a place and an orientation that provide good
reception, then set up the antenna again.
When you listen to a track with bass sounds at
high volume, the speaker vibration may cause the
sound to skip.
If you cannot obtain good reception, we
recommend you connect a commercially
available external antenna.
• Load the disc and wait for 10 to 20 minutes with
the system turned on.
• The supplied antenna receives signals along its
entire length, so make sure you extend it fully.
Play does not start from the first track.
• Press PLAY MODE on the remote repeatedly
until “PROGRAM” or “SHUF” disappears to
return to normal play.
• Locate the antennas as far away from the speaker
cords as possible.
• Consult your nearest Sony dealer if the supplied
AM antenna wire has come off the plastic stand.
“—OVER—” appears.
• Try turning off surrounding electrical equipment.
• Press and hold m or press . to return to the
desired playing position.
A stereo FM program cannot be received in
stereo.
“OVER” lights up during recording.
• Set the volume of the connected component
lower.
• Press FM MODE on the remote until “MONO”
disappears from the display.
• See “There is severe hum or noise (“TUNED” or
“STEREO” flashes)”, and check the antenna
condition.
Recording or editing was done, but the TOC is
not updated.
• MD recording and editing contents are recorded
to the MD when the MD is removed, so make
sure you remove the MD after recording or
editing (see pages 19 and 29).
Cyclical static noise is heard while recording on
an MD.
• Adjust the antenna orientation and position until
the noise stops.
Recording is not possible.
• Remove the MD and slide the tab to close the
slot (see page 19).
• Connect the optional A/V component properly
(see page 49).
Personal Computer
• Switch to another sound source.
There is no sound or the sound is too low.
• Replace the MD with a recordable MD, or use
Erase Function to erase unnecessary tracks (see
page 34).
• Be sure to turn up the volume moderately with
the software, and then adjust the volume on the
system.
The sound from an MD you recorded is too low
(or too high).
The sound skips or the operation is unstable.
• Connect the system to the personal computer
directly with the supplied USB cable. Do not
connect the system to the computer through a
USB hub.
• Readjust the recording level (see page 26 or 40).
The buttons are disabled.
• Press NET MD to turn off the Net MD function.
“Windows cannot locate the driver” appears.
• Install the device driver.
continued
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (continued)
Self-diagnosis display
This system has a Self-diagnosis display
function to let you know if there is a system
malfunction. The display shows a code made
up of 3 or 5 letters and a message alternately to
show you the problem. To solve the problem
refer to the following list. If any problem
persists, consult your nearest Sony dealer.
Optional components
There is no sound.
• Refer to General item “There is no sound” on
page 57 and check the condition of the system.
• Connect the component properly (see page 49)
while checking:
– if the cords are connected properly.
– if the cord plugs are firmly inserted all the way.
• Turn on the connected component.
• Refer to the operating instructions included with
the connected component and start playing.
The sound is distorted.
• Set the volume of the connected component
lower.
C11/Protected
The sound from the component connected to the
DIGITAL OPTICAL IN jack is not heard.
The MD is protected against erasure.
cRemove the MD and slide the tab to close the
slot (see page 19).
• Press FUNCTION repeatedly until “OPTICAL
IN” appears.
C12/Cannot Copy
You tried to record a CD or MD with a format that
the system does not support, such as a CD-ROM.
If the system still does not operate
properly after performing the above
measures, reset the system as
follows:
cRemove the disc and turn off the system once,
then turn it on again.
C13/REC Error
With the system turned on, press REC/REC
IT, CDZ, and CD SYNC HIGH at the same
time.
Recording could not be performed properly.
cMove the system to a stable place, and start
recording over from the beginning.
The MD is dirty or scratched, or the MD does not
meet the standards.
“COLD RESET” appears in the display and the
system turns off. All system parameters are
reset to their factory settings. Afterwards, be
sure to do the followings procedures again:
presetting the radio stations, setting the clock
and the timer, and labeling the CD.
cReplace the MD and start recording over from
the beginning.
C13/Read Error
The MD deck cannot read the disc information
properly.
cRemove the MD once, then load it again.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
C14/Toc Error
The MD deck cannot read the disc information
properly.
One of the following messages may appear or
flash in the display during operations.
cReplace the MD.
cErase all the recorded contents of the MD using
All Erase Function (see page 35).
MD
Assign None
C41/Cannot Copy
• You have created a new group with no tracks.
The sound source is a copy of a commercially
available music software, or you tried to record a
CD-R (Recordable CD) or CD-RW (ReWritable
CD).
• All the recorded tracks are already registered to
groups.
Auto Cut
The MD deck is pausing the recording because
silence continued for 30 seconds or more during
recording.
cThe Serial Copy Management System prevents
making a digital copy (see page 57). You cannot
record a CD-R or CD-RW.
Blank Disc
C71/Check OPT-IN
The inserted recordable MD is new, or all tracks on
the MD have been erased.
This appears momentarily because of the signal of
the digital broadcast during recording.
cThere is no affect on the recorded contents.
Cannot Edit
No component is connected to the DIGITAL
OPTICAL IN jack, or a digital component is not
connected properly.
• A pre-mastered MD is in the deck.
• You tried to edit in Program or Shuffle Play
mode.
cConnect a digital component to the DIGITAL
OPTICAL IN jack properly using a digital
connecting cable (not supplied, see page 49).
• You tried to change the recording level of a track
recorded in LP2 or LP4 mode.
Cannot REC
The connected digital component is not turned on.
• A pre-mastered MD is in the deck.
• The function is switched to MD.
cSee the operating instructions supplied with the
connected component and confirm whether the
component is turned on.
Complete!
The digital connecting cable connected to the
DIGITAL OPTICAL IN jack is pulled out, or the
connected digital component is turned off during
digital recording.
The editing operation of MDs is completed.
Disc Full!
There is no time remaining on the MD.
cConnect the cable, or turn on the digital
Eject
component.
The MD deck is ejecting the MD.
E0001/MEMORY NG
Group Full!
There is an error in the internal data that the system
needs in order to operate.
You tried to create more than the maximum
number of the groups or there is not enough space
in the TOC of the MD for group registration.
cConsult your nearest Sony dealer.
E0101/LASER NG
Erase the unnecessary disc titles or track titles.
There is a problem with the optical pickup.
cThe optical pickup may have failed. Consult your
nearest Sony dealer.
continued
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-diagnosis display (continued)
S.F Edit!
You attempted to perform other operations during
S.F Edit (adjusting the recording level after
recording, Fade-in and Fade-out). You cannot
perform other operations during S.F Edit.
Impossible
• You tried to make an impossible editing
operation.
S.F Edit NOW
• You tried to operate the connected Net MD
during the timer-activated playback.
You pressed `/1 during S.F Edit (adjusting the
recording level after recording, Fade-in and Fade-
out). If you turn off the power before S.F Edit is
finished, the editing will not be properly
overwritten. Turn the power off after editing is
complete.
• You cannot combine or erase the tracks due to
the system limitations of MDs.
• “Impossible” appears, when you specify the
division point at the beginning or end of a track.
Press . or > to shift the position.
If you want to turn off the power during editing,
press `/1 again while the message is displayed.
Incomplete!
Adjustment of the recording level after recording
or Fade-in and Fade-out procedures have failed
since the unit was either subject to vibration or
there is a damaged or dirty disc in the tray. Place
the unit in a stable place to minimize shock and
vibration. Do not use damaged or dirty discs.
Smart Space
The signal was input again after silence continued
for 3 or more but less than 30 seconds during
digital recording.
Step Full!
You try to program 26 or more tracks (steps).
Initialize (flashing)
Text Protect
The Setup Menu settings have been lost.
There is CD TEXT information which cannot be
recorded on the MD.
Or the contents recorded by the timer have
disappeared over time and are not available for
saving to disc, or Program Play could not be
activated since the program has disappeared over
time.
TOC Reading
The MD deck is reading the TOC information of
the MD.
(The message flashes for about 4 seconds when
you turn on the deck by pressing ?/1.)
TOC Writing
The MD deck is writing the information of
recorded or edited contents.
Name Full
There is no more space to store track or disc titles.
Track End
No Change
You have reached the end of the track while
adjusting the dividing point during the Divide
Function.
When changing the recording level after recording,
the recording level did not change since you
pressed ENTER/YES on the remote without
making the adjustment.
Tr Protected
You tried to erase tracks on an MD that is write-
protected.
No Disc
There is no disc in the MD deck.
— OVER —
You have reached the end of the MD while
pressing and holding M during playing pause.
Push STOP!
You pressed PLAY MODE on the remote during
play.
—Rehearsal—
The MD is playing the specified dividing point for
confirmation during the A-B Erase function or the
Divide function.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
Specifications
Check and CD Position appear alternately
The disc could not be read properly.
Main unit (HCD-C7NT)
Amplifier section
European model:
DIN power output (rated): 15 + 15 W
Complete!
CD editing (Disc Memo) finished normally.
Eject
The CD player is ejecting the CD.
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
20 + 20 W
File Full
There are already 100 disc titles stored in the
system.
(6 ohms at 1 kHz, 10%
THD)
Initialize
Music power output (reference):
45 + 45 W
The system is being initialized. You cannot load a
CD during this time. Wait until “Initialize”
disappears from the display.
Other models:
The following measured at 220 V AC, 60 Hz
DIN power output (rated): 15 + 15 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
20 + 20 W
No Disc
There is no disc in the CD player.
—OVER—
(6 ohms at 1 kHz, 10%
THD)
You have reached the end of the CD while
pressing and holding M during playing pause.
Inputs
TAPE IN (stereo minijack):
Push STOP!
Sensitivity 250 mV,
You pressed PLAY MODE on the remote during
play.
impedance 47 kilohms
DIGITAL OPTICAL IN (Supported sampling
frequencies: 32 kHz, 44.1 kHz and 48 kHz)
Step Full!
You tried to program 26 tracks or more.
Outputs
TAPE OUT (stereo minijack):
Sensitivity 250 mV,
impedance 1 kilohm
PHONES (stereo minijack):
Accepts headphones with
an impedance of 8 ohms
or more
Personal Computer
Busy NOW!
You pressed NET MD during check-in or check-
out. Wait until the operation is completed.
Check USB
The USB cable is not connected properly. Check
the connection.
continued
CONNECT
You are checking-in/out tracks with OpenMG
Jukebox for Sony Net MDs. Do not disconnect the
supplied USB cable.
Net MD NOW
You pressed `/1 while the Net MD function is on.
Press NET MD to turn off the Net MD function
before you press `/1. You can also turn off the
system by pressing `/1 again while “Net MD
NOW” is displayed.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Specifications (continued)
Power requirements
European model:
Other models:
230 V AC, 50/60 Hz
220 V AC , 50/60 Hz
CD player section
System
Compact disc and digital
audio system
Power consumption
European model:
See the nameplate
0.5 W (at the power
saving mode)
Laser
Semiconductor laser
(λ = 780 nm)
Emission
Other models:
See the nameplate
duration: continuous
2 Hz – 20 kHz
Frequency response
Dimensions (w/h/d)
Approx. 145 × 125 ×
273 mm incl. projecting
parts and controls
MD deck section
System
MiniDisc digital audio
system
Mass
Approx. 4.5 kg
Laser
Semiconductor laser
(λ=780 nm)
Supplied accessories
Remote commander (1)
FM wire antenna (1)
AM loop antenna (1)
USB cable (1)
Operating Instructions (1)
M-crew for CMT-C7NT/
OpenMG Jukebox for Net
MD CD-ROM (1)
M-crew Operating
Instructions (1)
Emission duration:
continuous
Sampling frequency
Frequency response
44.1 kHz
5 Hz – 20 kHz
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
OpenMG Jukebox for Net
MD Operating
Instructions (1)
87.5 – 108.0 MHz
(50-kHz step)
FM wire antenna
75 ohm unbalanced
10.7 MHz
Antenna
Antenna terminals
Intermediate frequency
Warranty (1)
Design and specifications are subject to change
without notice.
AM tuner section
Tuning range
European model:
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
Other models:
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
AM loop antenna, external
antenna terminal
450 kHz
Antenna
Intermediate frequency
Speakers (SA-C7)
Speaker system
Two-way, bass reflex
system
Speaker units
9 cm dia., cone type
woofer
2.0 cm dia., soft dome
type tweeter
6 ohms
Rated impedance
Dimensions (w/h/d)
Approx. 149 × 248 ×
220 mm
Mass
Approx. 1.9 kg net per
speaker
Printed in China
Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|