3-452-364-11(1)
Micro HI-FI
Component
System
Operating Instructions
CMT-HX80R
© 2008 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on DualDiscs
Disposal of waste
batteries (applicable
in the European
A DualDisc is a two sided disc product
which mates DVD recorded material on
one side with digital audio material on
the other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback on
this product is not guaranteed.
Union and other
European countries
with separate
collection systems)
Music discs encoded with copyright
protection technologies
is product is designed to playback
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some
record companies. Please be aware that
among those discs, there are some that
do not conform to the CD standard and
may not be playable by this product.
is symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not be
treated as household waste. By ensuring
these batteries are disposed of correctly,
you will help prevent potentially negative
consequences for the environment and
human health which could otherwise be
caused by inappropriate waste handling of
the battery. e recycling of the materials
will help to conserve natural resources.
In case of products that for safety,
“WALKMAN” and “WALKMAN”
logo are registered trademarks of Sony
Corporation.
MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and omson.
Windows Media is a registered
trademark of Microsoſt Corporation
in the United States and/or other
countries.
performance or data integrity reasons
require a permanent connection with an
incorporated battery, this battery should
be replaced by qualified service staff only.
To ensure that the battery will be treated
properly, hand over the product at end-of-
life to the applicable collection point for
the recycling of electrical and electronic
equipment.
For all other batteries, please view the
section on how to remove the battery from
the product safely. Hand the battery over
to the applicable collection point for the
recycling of waste batteries.
For more detailed information about
recycling of this product or battery, please
contact your local Civic Office, your
household waste disposal service or the
shop where you purchased the product.
ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to parts and controls
is manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit
Front panel
Top panel
Continued
ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
Unit: VOLUME control (page 13,
14, 19, 21)
Remote: VOLUME +/ button
(page 13, 14, 19, 21, 25)
Turn or press to adjust the volume.
(USB) port (page 15, 19, 35)
Connect to an optional USB device.
(open/close) button (page 13)
Press to open or close the disc tray.
AUDIO IN jack (page 21)
Connect to an optional audio
component.
PHONES jack
Connect the headphones.
Playback buttons and function
buttons
Unit: USB (play/pause)
button (page 19)
/ (power) button (page 12, 25,
29, 30)
Press to turn on the system.
Press to select the USB function.
Press to start or pause playback of an
optional USB device.
STANDBY indicator (page 22, 26)
Lights up when the system is turned off.
Unit: CD (play/pause)
button (page 13)
Remote sensor (page 26)
Press to select the CD function.
Press to start or pause playback of a disc.
ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote: (play) button,
(pause) button
Press to start or pause playback.
Unit: ENTER button (page 13, 16,
19, 23)
Remote: (enter) button (page
12, 13, 16, 19, 23, 24, 25)
Press to enter the settings.
Unit: TUNER/BAND button (page
14)
Press to select the TUNER function.
Press to select DAB, FM or AM reception
mode.
/ (go back/go forward)
button (page 13, 17, 19, 23)
Press to select a track or file.
Unit: DMPORT (play/pause)
button
Press to select the DMPORT function.
Press to start or pause playback of the
audio device connected to the DIGITAL
MEDIA PORT adapter.
Unit: TUNE +/ (tuning) button
(page 14)
Remote: +/ (tuning) button
(page 14, 24)
Unit: FUNCTION button (page 13,
14, 19, 21)
Press to tune in the desired station.
+/ (select folder) button
(page 13, 17, 19, 23)
Press to select a folder.
Remote: FUNCTION +/ button
(page 13, 14, 19, 21)
Press to select the function.
/ (rewind/fast forward)
button (page 13, 19)
Unit: /CANCEL (stop/cancel)
button (page 13, 14, 17, 19)
Remote: (stop) button (page
13, 14, 17, 19)
Press to stop playback.
Press to cancel search.
Press to find a point in a track or file.
CD-USB SYNC/REC1 button (page
16)
Press to transfer music from a disc to the
connected optional USB device.
SEARCH/DAB AUTO SCAN button
(page 12, 13, 19)
USB MENU button (page 17)
Press to enter or exit search mode.
Press to erase audio files and folders from
the connected optional USB device.
Press to select which memory to read
to if the USB device has more than one
memory.
Press to run the DAB Automatic Scan.
Continued
ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound buttons (page 22)
Unit: DSGX button
PLAY MODE/TUNING MODE
button (page 13, 14, 16, 20, 23,
24)
Press to select the play mode of a CD,
MP3 disc or an optional USB device.
Press to select the tuning mode.
Remote: EQ button
Press to select the sound effect.
CLEAR button (page 23)
Press to delete a pre-programmed track
or file.
REPEAT/FM MODE button (page
13, 15, 19)
Press to listen to a disc, a single track or
file repeatedly.
TIMER MENU button (page 12,
25)
Press to set the clock and the Play Timer.
Press to select the FM reception mode
(monaural or stereo).
SLEEP button (page 25)
TOOL MENU button
Press to select a menu when using the
DIGITAL MEDIA PORT adapter.
Press to set the Sleep Timer.
DISPLAY button (page 22)
Press to change the information on the
display.
Battery compartment lid
(page 11)
RETURN button
Press to return to the previous menu
when using the DIGITAL MEDIA PORT
adapter.
/// button (page 12, 25)
Press to select the menu items.
TUNER MEMORY button (page
24)
Press to preset the radio station.
ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Information on the display
Play/Pause
Play mode (page 13, 20)
Tuner reception mode (page 14)
Tuner reception (page 14)
DSGX (page 22)
Timer (page 25)
REC (page 15)
USB MEMORY
Lights up when an optional USB device
is connected.
Text information
Audio format
DAB service reception
Lights up when secondary service is
received.
ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system securely
or
Wall socket
Right speaker
or
or
Left speaker
DAB external
antenna
(not supplied)
FM/DAB lead antenna (Extend it horizontally.)
White side for North American model
Brown side for other regions
AM loop antenna
Connect white side.
75-ohm coaxial cable with F male type connector (not supplied)
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
When carrying this system
Speakers
Connect the speaker cords to the
SPEAKER jacks.
1
Remove a disc to protect the CD
mechanism.
Power
2
Press FUNCTION +/ (or FUNCTION
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
on the unit)
repeatedly to select
the CD function.
3
4
Hold down SEARCH
and press
“STANDBY”appears.
on the unit,
on the unit until
FM/AM antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
After “LOCK”appears, unplug the
power cord.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
Speaker pads
Attach the supplied speaker pads to
the bottom of the speakers to prevent
slipping.
DAB antenna
With a DAB external antenna (not
supplied), you can obtain higher DAB
broadcast sound quality. We recommend
that you use the supplied FM/DAB lead
antenna only temporarily until you install
a DAB external antenna.
DMPORT (DIGITAL MEDIA PORT)
Connect the DIGITAL MEDIA PORT
adapter. You need to connect the
DIGITAL MEDIA PORT adapter to an
optional audio device (portable audio
player, etc.).
To use the remote
Slide and remove the battery
compartment lid , and insert the two
Notes
supplied R6 (size AA) batteries, side
first, matching the polarities shown
below.
Available DIGITAL MEDIA PORT adapters
vary in each area.
Do not connect an adaptor other than the
DIGITAL MEDIA PORT adapter.
Do not connect or disconnect the DIGITAL
MEDIA PORT adapter to/from the
DMPORT while the system is on.
When using a DIGITAL MEDIA PORT
adapter that has video output function,
connect the adaptor directly to the TV.
Continued
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
With normal use, the batteries should last for
Setting the clock
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
Use buttons on the remote to set the
clock.
1
2
Press /
system.
to turn on the
To run the DAB Automatic Scan
.
Press TIMER MENU
e hour indication flashes in the
When you turn on the system for the first
time aſter you purchase the system, DAB
Automatic Scan starts automatically and
creates a list of available services. If you
want to run the DAB Automatic Scan
again, perform the procedure below.
display.
If “PLAY SET?” flashes in the display,
press /
repeatedly to select
“CLOCK SET?” and then press
.
1
Press DAB AUTO SCAN on the
unit.
“Auto Scan? Push ENTER” appears.
repeatedly to set
3
4
Press /
the hour, and then press
.
2
Press (or ENTER on the unit)
Scanning begins. “Auto Scan” appears.
Depending on the DAB services
available in your area, scanning may
take a few minutes.
.
Use the same procedure to set
the minutes.
e clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is off
Press DISPLAY . e clock is displayed
for about 8 seconds.
When scanning is complete, a list of
available services is created.
Notes
If your country or region does not support
DAB broadcast, “No Service” appears.
Do not press any button on the unit or
the remote during DAB Automatic Scan.
If scanning is interrupted, run the DAB
Automatic Scan again.
If you move to another area, repeat this
procedure to store the stations for your new
area.
is procedure clears all previously stored
presets.
Before unplugging the DAB antenna, make
sure the system is turned off to preserve your
own DAB settings.
is tuner does not support data services.
1ꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operations
Basic Operations
To
Press
Pause playback (or CD on the
unit) . To resume
Playing a CD/MP3 disc
play, press the button
again.
1
Select the CD function.
.
Stop playback
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
Select a folder
on an MP3
disc
Select a track /
or file
+/
.
2
Place a disc.
.
Press
on the unit, and place
a disc with the label side up on the
Select a folder SEARCH
on the
disc tray.
and file on
unit. Press /
an MP3 disc
to select the desired
while viewing folder, then press (or
the folder and ENTER on the unit)
.
file names on Press /
the display to select the desired
file, then press (or
.
ENTER on the unit)
Find a point in Hold down /
a track or file
during playback, and
To close the disc tray, press
on
release the button at the
desired point.
the unit again.
Do not force the disc tray closed with
your finger, as this may damage the
unit.
Select Repeat REPEAT
repeatedly
Play
until “REP” or “REP1”
appears.
3
4
Start playback.
Press (or CD on the unit)
To change the play mode
.
Press PLAY MODE
repeatedly while
the player is stopped. You can select
normal play (“ *” for all MP3 files
in the folder on the disc), shuffle play
Adjust the volume.
Press VOLUME +/ (or turn the
.
VOLUME control on the unit)
(“SHUF” or “
play (“PGM”).
SHUF*”), or program
*
When playing a CD-DA disc,
(SHUF)
Play performs the same operation as normal
(shuffle) play.
Continued
1ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Repeat Play
All tracks or files on a disc are played
Listening to the radio
Before you can receive DAB, you
must complete the DAB Automatic
Scan procedure (see “To run the DAB
Automatic Scan” (page 12)).
repeatedly up to five times.
“REP1” indicates that a single track or file is
repeated until you stop it.
Notes on playing MPꢁ discs
Do not save other types of files or
unnecessary folders on a disc that has MP3
files.
Folders that have no MP3 files are skipped.
MP3 files are played back in the order that
they are recorded onto the disc.
1
Select “TUNER DAB,”“TUNER FM”
or “TUNER AM.”
Press FUNCTION +/ (or TUNER/
BAND on the unit)
repeatedly.
e system can only play MP3 files that have
a file extension of “.MP3”.
2
3
Select the tuning mode.
If there are files on the disc that have the
“.MP3” file extension, but that are not MP3
files, the unit may produce noise or may
malfunction.
e maximum number of:
folders is 255 (including the root folder).
MP3 files is 511.
MP3 files and folders that can be
contained on a single disc is 512.
folder levels (the tree structure of files) is
8.
Press TUNING MODE
until “AUTO” appears.
repeatedly
Tune in the desired station.
Press +/ (or TUNE +/ on
the unit) . Scanning stops
automatically when a station is tuned
in, and then “TUNED” and “ST” (for
stereo programs only) appear.
Compatibility with all MP3 encoding/writing
soſtware, recording device, and recording
media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted
audio or may not play at all.
When you tune in a DAB station or
an FM station that provides RDS
services, the service name or station
name appears on the display.
Notes on playing multisession discs
If the disc begins with a CD-DA (or MP3)
session, it is recognized as a CD-DA (or
MP3) disc, and other sessions are not played
back.
A disc with a mixed CD format is recognized
as a CD-DA (audio) disc.
4
Adjust the volume.
Press VOLUME +/ (or turn the
.
VOLUME control on the unit)
To stop automatic scanning (FM/AM
bands only)
.
Press
1ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To tune in a station with a weak signal
(FM/AM bands only)
Transferring music
from a disc to an USB
device
If “TUNED” does not appear and the
scanning does not stop, press TUNING
MODE
repeatedly until “AUTO” and
“PRESET” disappear, and then press
+/ (or TUNE +/ on the unit)
You can connect an optional USB device
repeatedly to tune in the desired station.
to the
(USB) port
on the unit and
transfer music from a disc to the USB
To reduce static noise on a weak FM
stereo station
device.
You can transfer music from a CD-DA
disc or MP3 disc only.
e audio format of files transferred by
this system is MP3.
Press FM MODE
repeatedly until
“MONO” appears to turn off stereo
reception.
e amount of free space required on the
USB device is about 1 MB per minute
when transferring music from a CD.
Required free space may be larger when
transferring music from an MP3 disc.
Notes on listening to DAB stations
When tuning in a DAB station, it may take a
few seconds before you hear any sound.
Primary service is automatically received
when secondary service ends.
See “Compatible USB devices with this
system” (page 35) for a list of USB devices
that can be connected to this system.
Synchronized transfer
(SYNC REC)
You can easily transfer all the music on a
disc to an USB device.
1
Connect an USB device to the
(USB) port
below.
as shown
USB device
Continued
1ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
When USB cable connection is
necessary, connect the USB cable
supplied with the USB device to be
connected.
Transferring a single track
or MP3 file during playback
(REC1)
See the operation manual supplied
with the USB device to be connected
for details on the operation method.
You can easily transfer the track or MP3
file that is currently being played back
onto an USB device.
2
3
Select the CD function, then
load the disc to transfer music.
1
2
3
4
Connect an USB device to the
(USB) port
.
Press PLAY MODE
repeatedly
to select the play mode when
the CD player is stopped.
Select the CD function, then
load the disc to transfer music.
e play mode automatically changes
to normal play mode, if you start
transferring in shuffle play mode,
repeat play mode or in program play
mode (when no tracks or MP3 files
are programmed).
Select the track or MP3 file you
want to transfer, then start play.
Press CD-USB SYNC/REC1
on
For details about the play mode, see
“To change the play mode” (page 13).
the unit while the selected track
or MP3 file is being played back.
“REC” flashes, and the display cycles
through “REC 1,” “xxxMB Free”
(remaining space on the USB device)
and “Push ENTER.”
on
4
5
Press CD-USB SYNC/REC1
the unit.
“REC” flashes, and the display cycles
through “SYNC REC,” “xxxMB Free”
(remaining space on the USB device)
and “Push ENTER.”
e USB device stands by for
transferring and the CD player pauses
for play.
e USB device stands by for
transferring and the CD player pauses
for play.
5
Press (or ENTER on the unit)
.
Transferring starts. When the transfer
is completed, the CD player continues
to play.
Press (or ENTER on the unit)
.
Transferring starts. When the transfer
is completed, the CD player and the
USB device stop automatically.
1ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To select the memory on the USB
device
To remove the USB device
1
Select the USB function.
If the USB device has more than one
memory (for example, internal memory
and a memory card), you can select
which memory to read to and then start
transferring.
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
on the unit in stop
mode until “No Device“ appears.
2
3
Hold down
1
Connect the USB device to the
(USB) port
.
Remove the USB device.
2
Select the USB function.
To erase audio files or folders from the
USB device
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
You can erase audio files or folders from
the USB device.
on the unit in
3
Press USB MENU
stop mode.
1
Connect an USB device to the
(USB) port
.
“Select?” appears. If an audio file or
a folder is selected, “Erase?” appears
2
Select the USB function.
instead. Press /
repeatedly
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
to select “Select?.”
.
4
5
Press (or ENTER on the unit)
e name of a memory appears.
3
Press /
or
+/
e displayed name varies depending
on the specifications of the USB
device.
repeatedly to select the audio file or
folder you want to erase.
on the unit.
4
5
Press USB MENU
“Erase?” appears.
Press /
select the memory.
repeatedly to
Proceed to step 6 if only one memory
Press (or ENTER on the unit)
.
can be selected.
“Track Erase?” or “Folder Erase?”
.
To cancel this operation, press
appears in the display.
.
To cancel the erase operation, press
6
7
Press (or ENTER on the unit)
.
Start transferring by following steps 2
thorough 5 of “Synchronized transfer
(SYNC REC)”or “Transferring a single
track or MP3 file during playback
(REC1).”
.
6
Press (or ENTER on the unit)
e selected audio file or folder is
erased.
To stop transferring
.
Press
Continued
1ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Folder and file generation rules
Do not remove the USB device during
transfer or erase operations. Doing so may
corrupt the data on the USB device or
damage the USB device itself.
Do not connect the system and the USB
device through an USB hub.
When transferring music from a CD, the
tracks are transferred as 128 kbps MP3 files.
When transferring music from an MP3 disc,
MP3 files are transferred with the same bit
rate as the original MP3 files.
While transferring music from an MP3
disc, no sound is output and “High Speed”
appears.
When first transferring music to an USB
device, a “MUSIC” folder is created
directly below the “ROOT.” Folders and
files are generated within this “MUSIC”
folder as follows.
SYNC REC1)
Music
Folder name File name
source
MP3
Same as the music source2)
“CDDA001”3) “TRACK001”4)
CD-DA
REC1
CD text information is not transferred in the
created MP3 files.
If you cancel the transfer partway, an MP3
file is created up to the point when the
transfer was stopped.
Music
Folder name File name
source
MP3
Same as the
music source2)
“TRACK001”4)
“REC1”5)
Transferring stops automatically if:
CD-DA
the USB device runs out of space during
1)
In Program Play mode, the folder name is
“PGM_xxx,” and the file name depends on
the music source (CD-DA disc or MP3 disc).
the transfer process.
the number of audio files on the USB
device reaches the limit for the number
that the system can recognize.
e maximum number of audio files and
folders that can be contained on a single USB
device is 999 (including the “ROOT” and
“MUSIC” folders).
e maximum number of audio files and
folders may vary depending on the audio file
and folder structure.
2)
3)
Up to 32 characters of the name are assigned.
Folder numbers are assigned serially
thereaſter up to the maximum 999 (including
the “ROOT” and “MUSIC” folders).
File numbers are assigned serially thereaſter.
A new file is created in the “REC1” folder
each time REC1 is performed.
4)
5)
You cannot erase audio files and folders in
shuffle play mode or program play mode.
If the folder to be erased contains non-MP3/
WMA/AAC format files or sub folders, these
are not erased.
If a folder or file that you are trying to
transfer already exists on the USB device
with the same name, a sequential number is
added aſter the name without overwriting the
original folder or file.
1ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operations
Listening to music of
an USB device
To
Press
Pause playback (or USB on
the unit) . To resume
You can listen to music stored in the USB
play, press the button
device.
again.
e audio formats that can be played
back by this system are as follows:
MP3*/WMA*/AAC*
. To resume
Stop playback
play, press (or
USB on the unit)
1)
play, press
See “Compatible USB devices with this
system” (page 35) for a list of USB devices
that can be connected to this system.
. To cancel resume
again.
Select a folder
Select a file
.
+/
* Files with copyright protection (Digital
Rights Management) cannot be played by
this system.
Files downloaded from an online music store
may not be played by this system.
.
/
Select a folder SEARCH
on the
and file while unit. Press /
viewing the
to select the desired
folder and file folder, then press (or
names on the ENTER on the unit)
1
2
Select the USB function.
Press FUNCTION +/ (or
system display2)
. Press /
FUNCTION on the unit)
repeatedly.
to select the desired
file, then press (or
ENTER on the unit)
Connect an optional USB device
.
.
to the (USB) port
Find a point in Hold down /
When the USB device is connected,
a file
during playback,
the display changes as follows:
and release the button
“Reading”
“Storage Drive*”
at the desired point.
* When connecting an USB storage device,
the volume label is displayed next if
recorded.
Select Repeat REPEAT
repeatedly
Play
until “REP” or “REP1”
appears.
Note
Remove the
USB device
Hold down
on
It may take about 10 seconds before
“Reading” appears depending on the type
of USB device connected.
the unit until “No
Device” appears, then
remove the USB device.
3
4
Start playback.
1)
When playing a VBR MP3/WMA file,
the system may resume playback from a
different point.
You can search by different information such
as album or genre for digital music players.
Press (or USB on the unit)
.
2)
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
Continued
1ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
e audio formats that you can listen to with
To change the play mode
this system are as follows:
Press PLAY MODE
repeatedly while
MP3: file extension “.mp3”
Windows Media Audio file: file extension
“.wma”
the USB device is stopped. You can select
normal play (“ ” for all files in the
folder on the USB device), shuffle play
AAC: file extension “.m4a”
(“SHUF” or “
play (“PGM”).
SHUF”), or program
Note that even when file names have the
above file extensions, if the actual file differs,
the system may produce noise or may
malfunction.
Compatibility with all encoding/writing
soſtwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or interrupted
audio or may not play at all.
Notes on the USB device
You cannot change the play mode during
playback.
Some time may be needed to start playback
when:
the folder structure is complex.
the memory capacity is excessive.
When the USB device is inserted, the system
reads all the files on the USB device. If there
are many folders or files on the USB device,
it may take a long time to finish reading the
USB device.
Do not connect the system and the USB
device through an USB hub.
With some connected USB devices, aſter an
operation is performed, there may be a delay
before it is performed by this system.
is system does not necessarily support all
the functions provided in a connected USB
device.
e playback order for the system may differ
from the playback order of the connected
USB device.
Always hold down
on the unit and
make sure that “No Device” appears before
removing the USB device. Removing the USB
device while “No Device” is not displayed
may corrupt the data on it or damage the
USB device itself.
Do not save other types of files or unnecessary
folders on an USB device that has audio files.
Folders that have no audio files are skipped.
e maximum number of audio files and
folders that can be contained on a single USB
device is 999 (including the “ROOT” and
“MUSIC” folders).
e maximum number of audio files and
folders may vary depending on the file and
folder structure.
ꢀ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using optional audio
components
Using the DIGITAL
MEDIA PORT adapter
1
Connect additional audio
component to the AUDIO
1
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly to select “DMPORT.”
IN jack
on the unit using
an audio analog cord (not
supplied).
2
Start playing the connected
component.
e sound from the connected
component is played on the system.
For operation details, see the
operating instructions of the
2
3
Turn down the volume.
Press VOLUME (or turn the
VOLUME control on the unit)
.
DIGITAL MEDIA PORT adapter.
Select the AUDIO IN function.
Press FUNCTION +/ (or
Note
FUNCTION on the unit)
repeatedly.
Depending on the type of DIGITAL MEDIA
PORT adapter, you may be able to operate the
connected component using either the buttons
on the remote or the unit.
4
5
Start playing the connected
component.
Tip
You can use the system as a battery charger for
the audio device connected to the DIGITAL
MEDIA PORT adapter while the system is on.
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
ꢀ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
Changing the display
To add a sound effect
To
Change
Press
DISPLAY
repeatedly
To
Press
information on when the system is on.
Generate a
more dynamic
sound
DSGX
on the unit.
the display1)
Check the
DISPLAY
when
clock when the the system is off2). e
(Dynamic
Sound
system is off
clock is displayed for 8
seconds.
Generator
X-tra)
1)
For example, you can view CD/MP3 disc
information or the USB device information,
such as;
Set the sound EQ
effect
repeatedly
to select “BASS”
or “TREBLE,” and
track or file number during normal play.
track or file name (“ ”) during normal
then press +/
repeatedly to adjust the
play.
level.
artist name (“ ”) during normal play.
album or folder name (“
normal play.
”) during
total playing time while the player is
stopped.
You can also view DAB station information
such as the service name, channel label,
preset number, frequency, DLS (Dynamic
Label Segment), or ensemble label.
2)
e STANDBY indicator
on the unit
lights up when the system is off.
Notes on the display information
Characters that cannot be displayed appear
as “_”.
e following are not displayed:
total playing time for a CD-DA disc
depending on the play mode.
total playing time and remaining playing
time for an MP3 disc and USB device.
e following are not displayed correctly:
folder and file names that do not follow
either the ISO9660 Level 1, Level 2 or
Joliet in the expansion format.
e following are displayed:
ID3 tag information for MP3 files when
ID3 version 1 and version 2 tags are used
(up to 62 characters for an MP3 disc).
up to 8 characters of service name, up to
128 characters of DLS (Dynamic Label
Segment) and up to 16 characters of
ensemble label.
ꢀꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press (or ENTER on the unit)
to add the track or file to the
program.
Other Operations
Creating your own
CD
“ . ” appears when the total
program time exceeds 100 minutes
for a CD, or when you select a CD
track whose number is 21 or over, or
when you select an MP3 file.
program
(Program Play)
1
Select the desired function.
CD
USB
Press FUNCTION +/ (or
e total program time cannot be
displayed, so “ . ” appears.
FUNCTION on the unit)
repeatedly to select the CD function.
5
6
Repeat steps 3 through 4 to
program additional tracks or
files, up to a total of 25 tracks or
files.
USB
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly to select the USB function.
repeatedly
2
3
Press PLAY MODE
until “PGM”appears while the
system is stopped.
To play your program of tracks
.
or files, press
e program remains available until
you open the disc tray or remove
the USB device. To play the same
Press /
until the desired track or file
number appears.
repeatedly
.
program again, press
To cancel Program Play
When programming files, press
Press PLAY MODE
repeatedly until
+/
repeatedly to select the
“PGM” disappears while the system is
desired folder, and then select the
stopped.
desired file.
Example: When programming tracks
on a CD
To delete the last track or file of the
program
Press CLEAR
stopped.
while the system is
Selected track or file number Total playing time of
program (including
selected track or file)
ꢀꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
To call up a preset radio
Presetting radio
stations
You can preset your favorite radio
stations and tune them in instantly
by selecting the corresponding preset
number.
Use buttons on the remote to preset
stations.
station, press TUNING MODE
repeatedly until “PRESET”
appears, and then press +/
repeatedly to select the desired
preset number.
Note on presetting DAB stations
You can preset a DAB service only when it can
be received.
1
Tune in the desired station (see
“Listening to the radio”(page
14)).
.
2
Press TUNER MEMORY
Preset number
3
Press +/
repeatedly to
select your desired preset
number.
If another station is already assigned
to the selected preset number,
the station is replaced by the new
stations.
.
4
5
Press
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 DAB, 20 FM
and 10 AM stations.
e preset stations are retained
for about half a day even if you
disconnect the power cord or if a
power failure occurs.
ꢀꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Use the same procedure as in
step 4 to set the time to stop
playing.
Using the Timers
e system offers two timer functions.
If you use the Play Timer with the Sleep
Timer, the Sleep Timer has priority.
Select the sound source.
Press /
repeatedly until the
Sleep Timer:
desired sound source appears, and
You can fall asleep to music. is
function works even if the clock is not
set.
then press
. e display shows
the timer settings.
to turn off the
7
Press /
Press SLEEP
repeatedly.
system.
If you select “AUTO,” the system
automatically turns off aſter the current
disc or USB device stops or in 100
minutes.
e system turns on 15 seconds
before the preset time. If the system is
on at the preset time, the Play Timer
will not play.
Play Timer:
To activate or check the timer again
You can wake up to CD, tuner or optional
USB device at a preset time.
Use buttons on the remote to control the
Play Timer. Make sure you have set the
clock.
.
1
Press TIMER MENU
“TIMER SEL?” flashes in the display.
2
3
Press
.
Press /
repeatedly to select
1
Prepare the sound source.
“PLAY SEL?.”
Prepare the sound source, and then
press VOLUME +/
to adjust the
.
4
Press
volume.
To start from a specific track or file,
create your own program (page 23).
To cancel the timer
.
1
Press TIMER MENU
.
2
3
Press TIMER MENU
“TIMER SEL?” flashes in the display.
Press /
repeatedly to
select “PLAY SET?,”and then
.
2
3
Press
Press /
repeatedly to select
.
press
“TIMER OFF?.”
“ON TIME” appears, and the hour
indication flashes.
.
4
Press
4
Set the time to start playing.
To change the setting
Press /
repeatedly to set the
Start over from step 1.
hour, and then press
. e
minute indication flashes. Use the
Tip
e Play Timer setting remains as long as the
setting is not canceled manually.
procedure above to set the minutes.
ꢀꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Severe hum or noise.
Move the system away from sources of
Others
noise.
Connect the system to a different wall
socket.
Install a noise filter (available
separately) to the power cord.
Troubleshooting
Make sure the power cord and
speaker cords are correctly and firmly
connected.
1
The remote does not function.
Remove any obstacles between the
on
2
Find your problem in the checklist
below, and take the indicated
corrective action.
remote and the remote sensor
the unit, and position the unit away
from fluorescent lights.
If the issue persists, contact your
nearest Sony dealer.
Point the remote at the system’s sensor.
Move the remote closer to the system.
The STANDBY indicator
remains lit
If the STANDBY indicator flashes
Immediately unplug the power cord,
and check the following items.
If your system has a voltage
selector, is the voltage selector set to
the correct voltage?
after unplugging the power cord.
e STANDBY indicator
may not
turn off immediately aſter unplugging
the power cord. is is not a
malfunction. e indicator will turn off
aſter about 40 seconds.
Are you using only the supplied
speakers?
CD/MP3 player
Is anything blocking the ventilation
holes on the top or back of the
system?
The sound skips, or the disc will not
play.
Wipe the disc clean, and replace it.
Move the system to a location away
from vibration (for example, on top of
a stable stand).
Move the speakers away from the
system, or place them on separate
stands. At high volume, speaker
vibration may cause the sound to skip.
Aſter the STANDBY indicator
stops flashing, reconnect the power
cord, and turn on the system. If the
issue persists, contact your nearest
Sony dealer.
General
Sound comes from one channel,
or the left and right volumes are
unbalanced.
Place the speakers as symmetrically as
possible.
Connect only the supplied speakers.
ꢀꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
becomes fragmented. Refer to the USB
device operation manual for how to
deal with this problem. If the problem
persists, contact your nearest Sony
dealer.
Play does not start from the first
track.
Press PLAY MODE
repeatedly until
both “PGM” and “SHUF” disappear to
return to normal play.
Transferring music to an USB device
results in an error.
Starting playback takes more time
than usual.
You are using an unsupported USB
device. See “Compatible USB devices
with this system” (page 35) for the
supported device types.
Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device
off and then on again aſter removing
it from the system. en perform
transferring again.
e following discs take a longer time
to start playback.
a disc recorded with a complicated
tree structure.
a disc recorded in multisession
mode.
a disc that has not been finalized (a
disc to which data can be added).
a disc that has many folders.
e USB device was disconnected
or the power was turned off during
the transfer process. Delete the
partially-transferred file, and perform
transferring again. If this does not
fix the problem, the USB device may
be broken. Refer to the USB device
operation manual for how to deal with
this problem. If the problem persists,
contact your nearest Sony dealer.
USB device
You cannot start transferring to an
USB device.
e following problems may have
occurred.
e USB device is full.
e number of files and folders on
the USB device has reached the
upper limit.
Files or folders on the USB device
cannot be erased.
e USB device is write-protected.
Transferring is stopped before it is
finished.
Check if the USB device is write-
protected.
You are using an unsupported USB
device. See “Compatible USB devices
with this system” (page 35) for the
supported device types.
e USB device is not formatted
correctly. Refer to the USB device
operation manual for how to format.
Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device
off and then on again aſter removing
it from the system. en perform
transferring again.
e USB device was disconnected
or the power was turned off during
the erase operation. Delete the
partially-erased file. If this does not
fix the problem, the USB device may
be broken. Refer to the USB device
operation manual for how to deal with
this problem. If the problem persists,
contact your nearest Sony dealer.
If the transfer and erase operations
are repeated multiple times, the file
structure within the USB device
Continued
ꢀꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Are you using a supported USB
device?
The USB device cannot be connected
.
into the
(USB) port
If you connect an unsupported USB
device, the following problems may
occur. See “Compatible USB devices
with this system” (page 35) for the
supported device types.
e USB device is not recognized.
File or folder names are not
displayed on this system.
Playback is not possible.
e sound skips.
ere is noise.
A distorted sound is output.
Transferring stops before it is
finished.
e USB device is being connected
backwards. Connect the USB device in
the correct orientation.
“Reading”is displayed for an
extended time, or it takes a long time
before playback starts.
e reading process can take a long
time in the following cases.
ere are many folders or files on the
USB device.
e file structure is extremely
complex.
e memory capacity is excessive.
e internal memory is fragmented.
us, we recommend following these
“Over Current”appears.
guidelines.
A problem has been detected with the
Total folders on USB device: 100 or
less
Total files per folder: 100 or less
level of electrical current from the
(USB) port . Turn off the system and
remove the USB device from the
(USB) port . Make sure there is no
Erroneous display
problem with the USB device. If this
display pattern persists, contact your
nearest Sony dealer.
Send the music data to the USB device
again, as the data stored in the USB
device may have been corrupted.
e character codes that can be
displayed by this system are numbers
and alphabet only. Other characters are
not displayed correctly.
There is no sound.
e USB device is not connected
correctly. Turn off the system and
reconnect the USB device, then turn
on the system and check if “USB
MEMORY” appears.
The USB device is not recognized.
Turn off the system and reconnect the
USB device, then turn on the system.
Connect the supported USB device
(page 35).
e USB device does not work
properly. Refer to the USB device
operation manual for how to deal with
this problem. If the problem persists,
contact your nearest Sony dealer.
There is noise, skipping, or distorted
sound.
Turn off the system, then reconnect the
USB device.
e music data itself contains noise, or
the sound is distorted. Noise may have
entered during the transfer process.
Delete the file, and try transferring
again.
ꢀꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Play does not start.
Turn off the system and reconnect the
USB device, then turn on the system.
Connect the supported USB device
(page 35).
Keep the antennas away from the
speaker cords, the power cord and the
USB cable to avoid picking up noise.
Connect a commercially available
external antenna.
Consult your nearest Sony dealer if the
supplied AM antenna has come off the
plastic stand.
Press (or USB on the unit)
to start play.
Play does not start from the first
track.
Turn off nearby electrical equipment.
Set the play mode to Normal Play
mode.
“TUNED”does not appear in the
display (DAB only).
Check all antenna connections, then
perform the DAB Automatic Scan
procedure (page 12).
Files cannot be played back.
The audio file does not have the
extension “.mp3”, “.wma”, “.m4a”.
The data is not stored in MP3/WMA/
AAC format.
USB storage device formatted with file
systems other than FAT16 or FAT32
are unsupported.*
If you use a partitioned USB storage
device, only files on the first partition
can be played.
Playback is possible up to 8 levels.
The number of folders has exceeded
999.
e current DAB service may not be
available. Press +/ (or TUNE +/
on the unit)
service.
to select a different
If you have moved to another area,
some services/frequencies may have
changed and you may not be able
to tune into your usual broadcast.
Perform the DAB Automatic Scan
procedure to re-register the contents of
broadcasts. (Performing this procedure
clears all previously stored presets.)
The number of files has exceeded 999.
Files that are encrypted or protected by
passwords, etc. cannot be played back.
To improve tuner reception
Turn off CD player power by using the
CD power management function. By
default, CD power is turned on.
*
is system supports FAT16 and FAT32, but
some USB storage devices may not support
all of these FAT. For details, see the operation
manual of each USB storage device or
contact the manufacturer.
1
2
Press FUNCTION +/ (or FUNCTION
on the unit)
repeatedly to select
the CD function, and then turn off
the system.
Tuner
After “STANDBY”stops flashing, press
/
on the unit while holding
Severe hum or noise, or stations
cannot be received. (“TUNED”or“ST”
flashes on the display.)
down /CANCEL
on the unit.
“CD POWER OFF” appears. With CD
player power turned off, disc access
time is increased. To turn on CD
player power, repeat the procedure
until “CD POWER ON” appears.
Connect the antenna properly.
Find a location and an orientation that
provide good reception, and then set
up the antenna again.
Continued
ꢀꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To reset the system to factory settings
If the system still does not operate
properly, reset the system to factory
settings.
Messages
CD/MP3 player, Tuner
Use buttons on the unit to reset the
system to its factory default settings.
Complete!: e preset operation ended
normally.
1
Disconnect and reconnect the power
cord, and then turn on the system.
LOCKED: e disc tray does not open.
Contact your nearest Sony dealer.
No Disc: ere is no disc in the system,
or you have loaded a disc that cannot
be played.
No Preset (DAB only): ere is no
stored preset station.
No Service (DAB only): ere is no
supported DAB broadcast in your
country or region.
2
Press /CANCEL , DSGX
and
/
at the same time.
All user-configured settings, such as
preset radio stations, timer, and the
clock, are deleted.
No Step: All of the programmed tracks
or files have been erased.
Over: You have reached the end of the
disc while pressing
playback or pause.
during
Push STOP!: You pressed PLAY MODE
during playback.
Reading: e system is reading
information of the disc. Some buttons
are not available.
Step Full!: You tried to program more
than 26 tracks or files (steps).
TIME NG!: e Play Timer start and end
times are set to the same time.
USB device
Complete!: e audio file or folder on
the USB device has been erased.
Device Full!: e USB device is full.
Erase Error!: Erase of audio files or
folders on the USB device failed.
Error: e USB device could not be
recognized or an unknown device is
connected (page 28).
Fatal Error!: e USB device has been
disconnected while transferring to or
erasing audio files or folders on the
USB device.
ꢁ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Folder Full!: e number of folders
on the USB device has reached the
maximum.
No Device: No USB device is connected
or the connected USB device has been
stopped.
No Step: All of the programmed tracks
or files have been erased.
No Track: No playable file is loaded in
the system.
Not in Use: You have made an invalid
operation.
Not Supported: An unsupported USB
device is connected.
Please Wait: e system is readying for
usage of an USB device.
Protected!: You tried to transfer or erase
operations against a write-protected
USB device.
Precautions
Discs that this system CAN play
Audio CD
CD-R/CD-RW (audio data/MP3 files)
Discs that this system CANNOT play
CD-ROM
CD-R/CD-RW other than those
recorded in music CD format or MP3
format conforming to ISO9660 Level
1/Level 2, Joliet or multisession
CD-R/CD-RW recorded in
multisession that have not ended by
“closing the session”
CD-R/CD-RW of poor recording
quality, CD-R/CD-RW that have
scratches or are dirty, or CD-R/CD-
RW recorded with an incompatible
recording device
Reading: e system is recognizing the
USB device.
Rec Error!: Transferring did not start,
stopped partway, or otherwise could
not be performed (page 27).
Removed: e USB device has been
removed.
Step Full!: You tried to program more
than 26 tracks or files (steps).
Storage Drive: USB device is connected.
CD-R/CD-RW which is finalized
incorrectly
Discs containing files other than
MPEG 1 Audio Layer-3 (MP3) files
Discs of non-standard shape (for
example, heart, square, star)
Discs that have adhesive tape, paper, or
sticker attached to them
Track Full!: e number of files on the
USB device has reached the maximum.
Rental or used discs with attached seals
where the glue extends beyond the seal
Discs that have labels printed using ink
that feels tacky when touched
Notes on discs
Before playing, wipe the disc with a
cleaning cloth from the center out to
the edge.
Do not clean discs with solvents, such
as benzine thinner, or commercially
available cleaners or anti-static spray
intended for vinyl LPs.
Do not expose discs to direct sunlight
or heat sources such as hot air ducts,
nor leave it in a car parked in direct
sunlight.
Continued
ꢁ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
On safety
On the speaker system
is speaker system is not magnetically
shielded, and the picture on nearby TV
sets may become magnetically distorted.
In this situation, turn off the TV, wait
15 to 30 minutes, and turn it back on.
If there is no improvement, move the
speakers far away from the TV.
Completely disconnect the power
cord (mains lead) from the wall socket
(mains) if it is not going to be used
for an extended period of time. When
unplugging the unit, always grip the
plug. Never pull the cord itself.
Should any solid object or liquid get
into the system, unplug the system, and
have it checked by qualified personnel
before operating it again.
Cleaning the cabinet
Clean this system with a soſt cloth
slightly moistened with a mild detergent
solution. Do not use any type of abrasive
pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
e AC power cord can be changed
only by a qualified service facility.
On placement
Do not place the system in an inclined
position or in locations that are
extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation,
or subject to vibration, direct sunlight
or a bright light.
Be careful when placing the unit
or speakers on surfaces that have
been specially treated (for example,
with wax, oil, polish) as staining or
discoloration of the surface may result.
If the system is brought directly
from a cold to a warm location or is
placed in a very damp room, moisture
may condense on the lens inside the
CD player, and cause the system to
malfunction. In this situation, remove
the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
On heat buildup
Heat buildup on the unit during
operation is normal and is not cause
for alarm.
Do not touch the cabinet if it has been
used continuously at a high volume
because the cabinet may have become
hot.
Do not obstruct the ventilation holes.
ꢁꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
CD player section
System: Compact disc and digital audio
system
Specifications
Main unit
Laser Diode Properties
Emission duration: Continuous
Laser Output*: Less than 44.6µW
* is output is the value measurement
at a distance of 200mm from the
objective lens surface on the Optical
Pick-up Block with 7mm aperture.
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Amplifier section
DIN power output (rated):
40 + 40 watts (6 ohms at 1 kHz, DIN)
Continuous RMS power output
(reference): 50 + 50 watts (6 ohms at
1 kHz, 10% THD)
Music power output (reference):
50 + 50 watts (6 ohms at 1 kHz, 10%
THD)
Tuner section
DAB tuner section:
Inputs:
Frequency range*
AUDIO IN (stereo mini jack):
voltage 250 mV, impedance
22 kilohms
Band-III: 174.928 (5A) 239.200
(13F) MHz
* For details, see “DAB frequency table”
(page 34).
(USB) port: Type A, maximum
current 500 mA
Antenna: FM/DAB lead antenna
Antenna terminal: 75 ohms, F female
Outputs:
PHONES (stereo mini jack): accepts
headphones of 8 ohms or more
SPEAKER: accepts impedance of
6 ohms
FM stereo, FM/AM superheterodyne tuner
FM tuner section:
Tuning range:
USB section
Supported bit rate
87.5 108.0 MHz (50 kHz step)
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section:
MP3 (MPEG 1 Audio Layer-3):
32 320 kbps, VBR
WMA: 32 192 kbps, VBR
AAC: 48 320 kbps
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
Tuning range:
531 1,602 kHz (with 9 kHz tuning
interval)
Antenna: AM loop antenna, external
antenna terminal
WMA: 44.1 kHz
Intermediate frequency: 450 kHz
AAC: 44.1 kHz
Continued
ꢁꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
DAB frequency table (Band-III)
General
Power requirements:
Frequency Label Frequency Label
220 240 V AC, 50/60 Hz
174.928 MHz 5A
176.640 MHz 5B
178.352 MHz 5C
180.064 MHz 5D
181.936 MHz 6A
183.648 MHz 6B
185.360 MHz 6C
187.072 MHz 6D
188.928 MHz 7A
190.640 MHz 7B
192.352 MHz 7C
194.064 MHz 7D
195.936 MHz 8A
197.648 MHz 8B
199.360 MHz 8C
201.072 MHz 8D
202.928 MHz 9A
204.640 MHz 9B
206.352 MHz 9C
208.064 MHz 9D
209.936 MHz 10A
211.648 MHz 10B
213.360 MHz 10C
215.072 MHz 10D
216.928 MHz 11A
218.640 MHz 11B
220.352 MHz 11C
222.064 MHz 11D
223.936 MHz 12A
225.648 MHz 12B
227.360 MHz 12C
229.072 MHz 12D
230.784 MHz 13A
232.496 MHz 13B
234.208 MHz 13C
235.776 MHz 13D
237.488 MHz 13E
239.200 MHz 13F
Power consumption: 40 watts
Dimensions (w/h/d) (excl. speakers):
Approx. 305 × 116 × 226 mm
Mass (excl. speakers): Approx. 2.8 kg
Supplied accessories: Remote Commander
(1), R6 (Size AA) batteries (2), AM loop
antenna (1), FM/DAB lead antenna (2),
Speaker pads (8), DIGITAL MEDIA PORT
adapter (TDM-iP10(M))
Design and specifications are subject to
change without notice.
Standby power consumption:
0.5 W
Halogenated flame retardants
are not used in the certain
printed wiring boards.
Halogenated flame retardants
are not used in cabinets.
Speaker
Speaker system: 2 way speaker system, Bass
reflex
Speaker units: Woofer 12 cm, cone type,
Tweeter 4 cm, cone type
Rated impedance: 6 ohms
Dimensions (w/h/d): Approx. 146 × 262 ×
200 mm
Mass: Approx. 2.2 kg
ꢁꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation may not always be ensured even
when using these USB devices.
Some of these USB devices may not be
available for purchase in certain areas.
Compatible USB
devices with this
system
You can use the following Sony USB
devices on this system. Other USB
devices cannot be used on this system.
Notes on Walkman
®
When transferring music to a Walkman
®
using “Media Manager for WALKMAN,” be
sure to transfer in MP3 format. Files in MP4
format (AAC or VIDEO) are not displayed
by this system.
When connecting a Walkman to the system,
®
Verified Sony digital music player (as
of March 2008)
be sure to connect aſter the display “Creating
Library” or “Creating Database” on the
Walkman has disappeared.
®
Product name Model name
NWD-B103 / B103F /
Walkman
®
B105 / B105F
NWZ-B103F / B105F
NWZ-A815 / A816 /
A818
NWZ-S515 / S516 /
S615F / S616F / S618F
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://support.sony-europe.com/>
For customers in Latin America:
<http://www.sony-latin.com/index.crp>
For customers in Asia and Oceania:
<http://www.sony-asia.com/support>
Notes
When formatting the USB device, be sure
to format using the device itself or the
dedicated formatting soſtware for that device.
Otherwise, you may be unable to transfer
music to the USB device properly on this
system.
Do not use USB devices other than these
USB devices. Operation of models not listed
here is not guaranteed.
ꢁꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|