4-129-741-14(1)
FM Stereo
FM/AM Receiver
Operating Instructions
STR-DH100
©2009 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
12)Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
CAUTION
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
To reduce the risk of electric shock, the speaker cord
should be connected to the apparatus and the
speakers in accordance with the following
instructions.
1) Disconnect the AC power cord from the MAINS.
2) Strip 10 to 15 mm of the wire insulation of the
speaker cord.
3) Connect the speaker cord to the apparatus and
the speakers carefully so as not to touch the core
of speaker cord by hand. Also disconnect the AC
power cord from the MAINS before
disconnecting the speaker cord from the
apparatus and the speakers.
13)Unplug this apparatus during lightning storms or
when unused for long periods of time.
14)Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
For customers in Europe
The following FCC statement
applies only to the version of
this model manufactured for
sale in the U.S.A. Other
versions may not comply with
FCC technical regulations.
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. The recycling of materials
will help to conserve natural resources. For more
detailed information about recycling of this product,
please contact your local Civic Office, your
household waste disposal service or the shop where
you purchased the product.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of waste batteries
(applicable in the European
About This Manual
Union and other European
countries with separate
collection systems)
• The instructions in this manual are for model
STR-DH100. Check your model number by
looking at the lower right corner of the front panel.
In this manual, models of area code U is used for
illustration purposes unless stated otherwise. Any
difference in operation is clearly indicated in the
text, for example, “Models of area code U only”.
• The instructions in this manual describe the
controls on the supplied remote. You can also use
the controls on the receiver if they have the same
or similar names as those on the remote.
This symbol on the battery or on the packaging
indicates that the battery provided with this product
shall not be treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The chemical
symbols for mercury (Hg) or lead (Pb) are added if
the battery contains more than 0.0005% mercury or
0.004% lead.
By ensuring these batteries are disposed of correctly,
you will help prevent potentially negative
consequences for the environment and human health
which could otherwise be caused by inappropriate
waste handling of the battery. The recycling of the
materials will help to conserve natural resources.
In case of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery, this battery
should be replaced by qualified service staff only.
To ensure that the battery will be treated properly,
hand over the product at end-of-life to the applicable
collection point for the recycling of electrical and
electronic equipment.
About area codes
The area code of the receiver you purchased is
shown on the lower right portion of the rear panel
(see the illustration below).
R
L
L
A
B
R
RS
Area code
For all other batteries, please view the section on
how to remove the battery from the product safely.
Hand the battery over to the applicable collection
point for the recycling of waste batteries.
For more detailed information about recycling of
this product or battery, please contact your local
Civic Office, your household waste disposal service
or the shop where you purchased the product.
Any differences in operation, according to the area
code, are clearly indicated in the text, for example,
“Models of area code AA only”.
Notice for customers: The following
information is only applicable to
equipment sold in the countries
applying EU Directives.
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan. The Authorized Representative for
EMC and product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters
please refer to the addresses given in separate
service or guarantee documents.
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
3: Connecting the audio/video
components ............................................ 13
Enjoying sound from the component
connected to the receiver........................ 18
Enjoying sound from the components
PORT...................................................... 19
5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Description and location of parts
Front panel
2
3
6
1
4
5
MASTER VOLUME
INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
MEMORY/
ENTER
FM MODE
TUNING MODE
TUNING
BASS
TREBLE
DISPLAY
DIMMER
MUTING
PHONES
qg
qf
qd
qs qa
0
9
8
7
About the indicators on the display
qj
qh
MEMORY
RDS
MONO
SP A
SP B
SLEEP
ST
qk
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
Name
Function
A ?/1
Press to turn the receiver on
P SP A/SP B
Lights up according to the
speaker system used (page
17). However, these
indicators do not light up if
the speaker output is turned
off or if headphones are
connected.
B SPEAKERS
(OFF/A/B/
A+B)
Switch to OFF, A, B, A+B of
C INPUT
Turn to select the input
source to play back (page 18,
SELECTOR
Q SLEEP
Lights up when the sleep
D Display
The current status of the
selected component or a list
of selectable items appears
R Tuning
Lights up when using the
receiver to tune in radio
stations (page 21), etc.
indicators
MEMORY
RDS
A memory function, such as
Preset Memory (page 23),
etc., is activated.
A station that provides RDS
service is tuned in.
E Remote
Receives signals from remote
commander.
sensor
F MASTER
Turn to adjust the volume
level of all speakers at the
same time (page 18).
VOLUME
Note
“RDS” appears for models of
area code CEL, CEK only.
Monaural broadcast
G MUTING
Press to turn off the sound
temporarily.
Press MUTING again to
restore the sound (page 19).
MONO
ST
Stereo broadcast
A preset station number
appears when the preset radio
station is selected.
H DIMMER
Press repeatedly to adjust the
brightness of the display.
Note
I DISPLAY
Press repeatedly to select
information displayed on the
The preset station number
will change according to the
preset station you select.
For details on presetting radio
J TREBLE +/– Press repeatedly to adjust the
treble level of the speakers
K BASS +/–
Press repeatedly to adjust the
bass level of the speakers
L MEMORY/
Press to store a station or
enter the selection when
selecting the settings (page
ENTER
M TUNING
Press to operate the tuner
(FM/AM) (page 21).
MODE
TUNING +/–
N FM MODE
Press to select the FM
monaural or stereo reception
O PHONES jack Connects to headphones
7GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
1
2
DMPORT
ANTENNA
AM
DC5V
0.7A MAX
R
L
L
IN
OUT
IN
IN
IN
OUT
IN
A
B
A
B
L
L
L
L
R
R
R
R
R
SA-CD/
CD
SAT
BD/DVD
VIDEO
SPEAKERS
MD/TAPE
4
3
A DMPORT
D AUDIO INPUT/OUTPUT section
DMPORT
jack
Connects to a
AUDIO IN/
OUT jacks
Connects to a Super
White (L)
Red (R)
DIGITAL MEDIA
PORT adapter
Audio CD player,
CD player, etc.
B ANTENNA section
FM
ANTENNA
jack
Connects to the FM
wire antenna
(aerial) supplied
with this receiver
AM
ANTENNA
terminals
ConnectstotheAM
loop antenna
(aerial) supplied
with this receiver
C SPEAKERS section
Connects to
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
Remote commander
A TV ?/1
Press TV ?/1 and TV (O) at
You can use the supplied remote to operate the
receiver and to control the Sony audio/video
components that the remote is assigned to
(on/standby) the same time to turn the TV
on or off.
AV ?/1
Press to turn on or off the
(on/standby) Sonyaudio/videocomponents
that the remote is assigned to
operate (page 28).
RM-AAU055
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other
components (SYSTEM
STANDBY).
1
2
wd
TV ?/1
?/1
SLEEP
VIDEO
TV INPUT AV ?/1
ws
Note
SYSTEM STANDBY
SAT MD/TAPE
BD/DVD
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
3
4
SA-CD/CD TUNER DMPORT
BASS
TREBLE
wa
B ?/1
Press to turn the receiver on or
BD/DVD
MENU
(on/standby) off.
1
4
7
2
5
3
6
9
5
6
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
DISC SKIP
D.TUNING
w;
ql
7
8
9
8
>10/
-
MEMORY AMP MENU
ENTER
C Input buttons Press one of the buttons to
select the component you
0/10
CLEAR
TOOLS/
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components.
You can change the button
assignments following the
steps in “Changing button
DISPLAY
OPTIONS MUTING
q;
qa
qk
qj
qh
TV VOL
MASTER VOL
qs
qd
RETURN/EXIT
TV CH –
MENU/HOME
TV CH +
PRESET – REPLAY ADVANCE PRESET +
.
<
<
>
TUNING –
TUNING +
TREBLE +/– Press repeatedly to adjust the
D
m
M
H
X
qf
treble level of the speakers.
FM MODE
TV
x
E BD/DVD
Press to display the menu of
the DVD or Blu-ray disc on
the TV screen. Then, use V, v,
qg
MENU
B, b and
(Q) to perform
menu operations.
DISC SKIP
Press to skip a disc when
using a multi-disc changer.
F
G D.TUNING
Press to enter direct tuning
mode.
continued
9GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
Name
Function
H MEMORY
Press to store a station during
tuner operation.
m/Mb)
Press to
– search tracks in the forward/
reverse direction of the DVD
player.
– start fast forward/rewind of
the VCR, CD player, DVD
recorder, MD deck, tape
deck or Blu-ray disc player.
ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric
buttons of the TV, VCR, CD
player, DVD recorder, DVD
player or satellite tuner.
Ha)b)
Press to start playback of the
VCR, CD player, DVD player,
DVD recorder, MD deck or
Blu-ray disc player.
I AMP MENU
Press to display the menu of
the receiver. Then, use V, v,
B, b and
(Q) to perform
menu operations.
Xb)
Press to pause playback or
recording of the VCR, CD
player, DVD player, DVD
recorder, MD deck, tape deck
or Blu-ray disc player. (Also
starts recording with
J TOOLS/
Press to display and select
items from option menus of
the DVD player or Blu-ray
disc player.
Press TOOLS/OPTIONS and
TV (O) at the same time to
display options applicable to
the Sony TV.
OPTIONS
components in recording
standby.)
xb)
Press to stop playback of the
VCR, CD player, DVD player,
DVD recorder, MD deck, tape
deck or Blu-ray disc player.
K MUTING
Press to turn off the sound
temporarily.
Press MUTING again to
restore the sound.
Press MUTING and TV (O)
at the same time to activate
the TV’s muting function.
FM MODE
TV CH +/–
Press to select the FM
monaural or stereo reception.
Press TV CH +/– and TV (O)
at the same time to select
preset TV channels.
L TV VOL
Press TV VOL +/– and TV
(O) at the same time to adjust
the TV volume level.
+a)/–
PRESET +/– Press to select
MASTER
VOL +a)/–
Press to adjust the volume
level of all speakers at the
same time.
– preset stations.
– preset channels of the VCR
or satellite tuner.
M MENU/HOME Press to display the menu used
to operate audio/video
TUNING +/– Press to scan a station.
O TV
Press TV and the button with
orange printing at the same
time to enable TV operation.
components.
Press MENU/HOME and TV
(O) at the same time to
display the TV’s menu.
Then, use V, v, B, b and
(Q) to perform menu
operations.
N ./>b)
Press to skip a track of the CD
player, DVD player, DVD
recorder, MD deck, tape deck
or Blu-ray disc player.
<
REPLAY
/
Press to replay the previous
<
ADVANCE
scene or fast forward the
current scene of the VCR,
DVD player or Blu-ray disc
player.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
Name
Function
P RETURN/
Press to
T Numeric
Press to
– preset/tune to preset
stations.
EXIT O
buttons
– return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the DVD recorder, DVD
player, satellite tuner or Blu-
ray disc player is displayed
on the TV screen.
Press RETURN/EXIT O
and TV (O) at the same time
to return to the previous menu
or exit the TV’s menu while
the menu is displayed on the
TV screen.
(number 5a))
– select track numbers of the
CD player, DVD player,
DVD recorder, MD deck or
Blu-ray disc player. Press
0/10 to select track number
10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV (O) at the same time to
select the TV channels.
Q
After pressing BD/DVD
BASS +/–
Press repeatedly to adjust the
bass level of the speakers.
U
,
MENU (E), AMP MENU
(I) or MENU/HOME (M),
press V, v, B or b to select the
V/v/B/b
V SLEEP
Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
settings. Then, press
to
enter the selection if you have
pressed BD/DVD MENU or
MENU/HOME previously.
TV INPUT
Press TV INPUT and TV (O)
at the same time to select the
input signal (TV input or
video input).
W
Press
also to enter the
selection of the receiver,
VCR, satellite tuner, CD
player, DVD player, DVD
recorder or Blu-ray disc
player.
a)The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
b)This button is also available for DIGITAL
MEDIA PORT adapter operation. For details on
the function of the button, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
R DISPLAY
Press to select information
displayed on the TV screen of
the VCR, satellite tuner,
CD player, DVD player, DVD
recorder, MD deck or Blu-ray
disc player.
Press DISPLAY and TV (O)
at the same time to display
TV’s information on the TV
screen.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
S -/--
Press to select the channel
entry mode, either one or two
digit of the VCR.
Press -/-- and TV (O) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
x
>10/
Press to select
– track numbers over 10 of the
VCR, satellite tuner, MD
deck or CD player.
– channel numbers of the
Digital CATV terminal.
CLEAR
Press to clear a mistake when
you press the incorrect
numeric button.
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2: Connecting speakers
Getting Started
Before connecting cords, make sure to
disconnect the AC power cord (mains lead).
1: Installing speakers
This receiver allows you to use a 2.0 channel
system.
Left speaker
Example of the speaker system
configuration
A
Left speaker
Right speaker
NTENNA
AM
R
L
L
OUT
IN
A
B
A
B
L
R
R
SPEAKERS
VIDEO
SPEAKERSB
terminals*
A
10 mm (13/32 in.)
Right speaker
ASpeaker cords (not supplied)
* If you have an additional speaker system, connect
them to the SPEAKERS Bterminals. You can
select the speakers you want to use with the
SPEAKERS (OFF/A/B/A+B) button on the
receiver (page 17).
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUT
3: Connecting the audio/
video components
MD deck,
Tape deck
How to connect your
components
A
This section describes how to connect your
components to this receiver. Before you begin,
refer to “Component to be connected” below
for the pages which describe how to connect
the audio/video components.
DMPORT
ANTENNA
AM
DC5V
0.7A MAX
After connect all your components, proceed to
IN
OUT
IN
IN
IN
OUT
IN
L
L
L
L
R
R
R
R
SA-CD/CD
SAT
BD/DVD
VIDEO
MD/TAPE
Component to be connected
See
Audio components
• Super Audio CD player,
CD player
• MD deck, Tape deck
• DIGITAL MEDIA PORT adapter
A
Video components
• DVD player, Blu-ray disc player
• Satellite tuner, Set-top box
• DVD recorder, VCR
Super Audio
CD player,
CD player
Connecting audio components
DIGITAL
MEDIAPORT
adapter
The following illustration shows how to
connect a Super Audio CD, CD player, MD
deck, tape deck and DIGITAL MEDIA PORT
adapter.
TV
B
You can also view the images on the TV
screen by connecting the video output of the
DIGITAL MEDIA PORT adapter to the video
input of the TV. However, depending on the
DIGITAL MEDIA PORT adapter, video
output may not be possible.
AAudio cord (not supplied)
BVideo cord (not supplied)
Before connecting cords, make sure to
disconnect the AC power cord (mains lead).
* The type of connector varies depending on the
DIGITAL MEDIA PORT adapter.
For details, refer to the operating instructions
supplied with the DIGITAL MEDIA PORT
adapter.
continued
13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on connecting DIGITAL
MEDIA PORT adapter
Connecting video components
• When connecting the DIGITAL MEDIA
PORT adapter, be sure the connector is
inserted with the arrow mark facing towards
the arrow mark on the DMPORT jack.
• Be sure to make DMPORT connections
firmly, insert the connector straight in.
• As the connector of the DIGITAL MEDIA
PORT adapter is fragile, be sure to handle
with care when placing or moving the
receiver.
The following illustration shows how to
connect video components such as DVD
player, Blu-ray disc player, satellite tuner,
Set-top box, DVD recorder and VCR.
Before connecting the cords, be sure to
disconnect the AC power cord (mains lead).
DVD player,
Blu-ray disc player
• To disconnect the DIGITAL MEDIA PORT
adapter, squeeze the sides of the connector,
since the connector is locked in place.
A
DMPORT
ANTENNA
AM
DC5V
0.7A MAX
IN
OUT
IN
IN
IN
OUT
IN
L
L
L
L
R
R
R
R
SA-CD/CD
SAT BD/DVD
VIDEO
MD/TAPE
A
A
Satellite tuner,
Set-top box
DVD recorder, VCR
AAudio cord (not supplied)
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
If you connect a DVD player
• Be sure to change the factory setting of the
BD/DVD input button on the remote so that
you can use the button to control your DVD
• You can also rename the BD/DVD input so
that it can be displayed on the receiver’s
display. For details, see “Naming inputs”
4: Connecting the
antennas (aerials)
Connect the supplied AM loop antenna
(aerial) and FM wire antenna (aerial).
Before connecting the antennas, make sure to
disconnect the AC power cord (mains lead).
FM wire antenna (aerial) (supplied)
If you connect a DVD recorder
• Be sure to change the factory setting of the
VIDEO input button on the remote so that
you can use the button to control your DVD
recorder. For details, see “Changing button
AM loop antenna (aerial)
(supplied)
DMPORT
ANTENNA
• You can also rename the VIDEO input so
that it can be displayed on the receiver’s
display. For details, see “Naming inputs”
AM
DC5V
0.7A MAX
IN
OUT
IN
IN
IN
OUT
IN
L
L
L
L
Notes
R
R
R
R
• You can record the audio signals of the
components connected to this receiver. For
example, connect a recording component such as a
tape deck to the VIDEO AUDIO OUT jacks and
press the input buttons (DMPORT, BD/DVD,
SAT, SA-CD/CD, MD/TAPE, TUNER) to select
the component to be recorded.
SA-CD
/
CD
SAT
BD/DVD
VIDEO
MD/TAPE
* The shape of the connector varies depending on
the area code of this receiver.
• Be sure to connect the video output of the video
component to the TV, so that the image is
displayed on the TV. However, you cannot do
video recording via this receiver. Refer to the
operating instructions of each connected
component for details.
Notes
• To prevent noise pickup, keep the AM loop
antenna (aerial) away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna
(aerial).
Tip
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
To output the sound of the TV from the speakers
connected to the receiver, be sure to turn off the
TV’s volume or activate the TV’s muting function.
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing initial setup
operations
5: Preparing the receiver
and the remote
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Connecting the AC power cord
(mains lead)
Be sure to use the buttons on the receiver for
this operation.
Connect the AC power cord (mains lead) to a
wall outlet.
?/1
Notes
• Before connecting the AC power cord (mains
lead), make sure that the metallic wires of the
speaker cords are not touching each other between
the SPEAKERS terminals.
MASTER VOLUME
INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
MEMORY/
FM MODE
TUNING MODE
TUNING
ENTER
BASS
TREBLE
DISPLAY
DIMMER
MUTING
PHONES
• Connect the AC power cord (mains lead) firmly.
AC power cord (mains lead)
MEMORY/ENTER
1 Press ?/1 to turn off the
receiver.
2 Hold down ?/1 for 5 seconds.
“PUSH” and “ENTER” appears on the
display alternately.
3 Press MEMORY/ENTER.
After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
To the wall outlet
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting batteries into the
remote
6: Selecting the speaker
system
You can select the speakers you want to drive,
if you have connected the speakers to
SPEAKERS Aand Bterminals.
Be sure to use the buttons on the receiver for
this operation.
Insert two R6 (size-AA) batteries in the
RM-AAU055 Remote Commander.
Observe the correct polarity when installing
batteries.
SPEAKERS (OFF/A/B/A+B)
MASTER VOLUME
INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
MEMORY/
FM MODE
TUNING MODE
TUNING
ENTER
BASS
TREBLE
DISPLAY
DIMMER
MUTING
PHONES
Notes
• Do not leave the remote in an extremely hot or
humid place.
Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the speaker
system you want to drive.
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
• When you replace the batteries, the remote buttons
may be reset to their factory settings. If this
happens, reassign the buttons again (page 28).
• When the remote no longer operates the receiver,
replace all the batteries with new ones.
To select
Light up
The speakers connected to the
SPEAKERS Aterminals
SP A
The speakers connected to the
SPEAKERS Bterminals
SP B
The speakers connected to both the
SPEAKERS Aand Bterminals
(parallel connection)
SP A
SP B
To turn off the speaker output
Press SPEAKERS (OFF/A/B/A+B)
repeatedly until the “SP A” and “SP B”
indicators on the display do not light up.
Note
You cannot switch the speaker system by pressing
SPEAKERS (OFF/A/B/A+B) when the headphones
are connected.
17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Selected input Components that can
[Display]
be played back
Playback
VIDEO
[VIDEO]
VCR, etc., connected to
the VIDEO jack
Enjoying sound from the
component connected to
the receiver
BD/DVD
[BD/DVD]
Blu-ray disc player, etc.,
connected to the BD/
DVD jack
SAT
[SAT]
Satellite tuner, etc.,
connected to the SAT jack
TV ?/1
MD/TAPE
[MD/TAPE]
MD deck, tape deck, etc.,
connected to MD/TAPE
jack
?/1
SLEEP TV INPUT AV ?/1
SYSTEM STANDBY
VIDEO
BD/DVD
SAT
MD/TAPE
SA-CD/CD
[SA-CD/CD]
Super Audio CD, CD
player, etc., connected to
the SA-CD/CD jack
Input
buttons
TUNER DMPORT
TREBLE
SA-CD/CD
BASS
TUNER
[FM or AM band]
Built-in radio tuner
BD/DVD
MENU
1
4
7
2
5
3
DMPORT
[DMPORT]
DIGITALMEDIAPORT
adapter connected to
DMPORT jack
DISC SKIP
6
D.TUNING
8
9
>10/
-
MEMORY AMP MENU
ENTER
AMP
MENU
2 Turn on the component and
0/10
CLEAR
start playback.
TOOLS/
DISPLAY
OPTIONS MUTING
MUTING
TV VOL
MASTER VOL
3 Press MASTER VOL +/– to
,
adjust the volume.
V/v/B/b
MASTER
VOL +/–
You can also use MASTER VOLUME on
the receiver.
RETURN/EXIT
MENU/HOME
Tips
• You can adjust the volume differently depending
on the speed with which you turn the MASTER
VOLUME on the receiver.
To turn the volume up or down quickly: turn the
knob quickly.
1 Press the input button to select
a component.
You can also use INPUT SELECTOR on
the receiver.
The selected input appears on the display.
To make fine adjustment: turn the knob slowly.
• You can adjust the volume differently depending
on the length of time you press and hold the
MASTER VOL +/– button on the remote.
To turn the volume up or down quickly: press and
hold the button.
To make a fine adjustment: press the button and
release it immediately.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To activate the muting function
Press MUTING.
The muting function will be canceled when
you do the following.
• Press MUTING again.
• Increase the volume.
Enjoying sound from the
components connected to
the DIGITAL MEDIA PORT
The DIGITAL MEDIA PORT (DMPORT)
allows you to enjoy sound from a portable
audio source or computer by connecting a
DIGITAL MEDIA PORT adapter.
The DIGITAL MEDIA PORT adapters are
available for purchase depending on the area.
For details on connecting the DIGITAL
MEDIA PORT adapter, see “Connecting
• Turn off the receiver.
Naming inputs
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
Notes
1 Press the input button to select
the input you want to create an
index name for.
• Do not connect an adapter other than the DIGITAL
MEDIA PORT adapter.
• Before connecting cords, make sure to disconnect
the AC power cord (mains lead).
• Do not connect or disconnect the DIGITAL
MEDIA PORT adapter while the receiver is turned
on.
• Depending on the DIGITAL MEDIA PORT
adapter, video output may not be possible.
• Depending on the type of DIGITAL MEDIA
PORT adapter, you can operate the connected
component by using the remote. For details on the
• Be sure you have made the video connection from
You can also use INPUT SELECTOR on
the receiver.
2 Press AMP MENU.
“BALANCE” appears on the display.
3 Press V/v repeatedly to select
“NAME IN”, then press
or b.
The cursor flashes and you can select a
character.
4 Press V/v to select a character,
then press B/b to move the
cursor to the next position.
1 Press DMPORT.
You can also use the INPUT SELECTOR
on the receiver to select “DMPORT”.
If you made a mistake
Press B/b until the character you want to
change flashes, then press V/v to select
the correct character.
2 Start playback of the connected
component.
The sound is played back on the receiver
and the image appears on the TV.
For details, refer to the operating
instructions supplied with the DIGITAL
MEDIA PORT adapter.
Tips
•You can select the character type as follows
by pressing V/v.
Alphabet (upper case) t Numbers t
Symbols
•To enter a blank space, press b without
selecting a character.
5 Press
.
The name you entered is registered.
19GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the setup
parameters
Amplifier Operations
x BALANCE (Speaker balance)
Lets you adjust the balance between left and
right speakers.
You can adjust from BAL. L+10 to BAL.
R+10 in 1 step.
Navigating through
menus
By using the amplifier menus, you can make
various adjustments to customize the receiver.
The initial setting is BAL. 0.
D.TUNING
7
8
9
x NAME IN (Naming)
>10/
-
MEMORY AMP MENU
ENTER
AMP
MENU
Lets you set the name of inputs and preset
stations. For details, see “Naming inputs”
0/10
CLEAR
TOOLS/
DISPLAY
OPTIONS MUTING
TV VOL
MASTER VOL
,
x DIMMER (Brightness of the
display)
Lets you adjust the brightness in 3 steps:
0% dim, 40% dim, 70% dim
The initial setting is 0% dim.
V/v/B/b
RETURN/EXIT
TV CH –
MENU/HOME
TV CH +
PRESET – REPLAY ADVANCE PRESET +
.
<
<
>
Tip
1 Press AMP MENU.
You can also press DIMMER repeatedly on the
receiver to adjust the brightness of the display.
“BALANCE” appears on the display.
2 Press
or b to enter the
parameter.
3 Press V/v repeatedly to select
the setting you want.
The setting is entered automatically.
To return to the previous display
Press B.
To exit the menu
Press AMP MENU.
Note
Some parameters and settings may appear
dimmed on the display. This means that they
are either unavailable or fixed and
unchangeable.
20GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the tone
Tuner Operations
You can adjust the tonal quality of the
speakers.
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver (page
VIDEO
BD/DVD
SAT
MD/TAPE
SA-CD/CD TUNER DMPORT
BASS
TREBLE
TREBLE
+/–
BASS
+/–
BD/DVD
MENU
Tip
1
2
3
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
Press TREBLE + or TREBLE –
repeatedly to adjust the treble
level.
Press BASS + or BASS –
repeatedly to adjust the bass level.
You can adjust from –10 dB to +10 dB in 1 dB
step.
Area code
U, CA
FM
AM
100 kHz
50 kHz
10 kHz*
9 kHz
CEL, CEK
The initial setting is 0 dB.
TUNER DMPORT
TREBLE
SA-CD/CD
TUNER
BASS
BD/DVD
MENU
1
4
7
2
5
3
Numeric
buttons
DISC SKIP
6
D.TUNING
D.TUNING
ENTER
8
9
>10/
-
MEMORY AMP MENU
ENTER
0/10
CLEAR
TOOLS/
DISPLAY
OPTIONS MUTING
TV VOL
MASTER VOL
RETURN/EXIT
TV CH –
MENU/HOME
TV CH +
PRESET – REPLAY ADVANCE PRESET +
.
<
<
>
TUNING –
TUNING +
TUNING +/–
FM MODE
m
M
H
X
TV
FM MODE
x
21GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning into a station
automatically (Auto Tuning)
Tuning into a station directly
(Direct tuning)
You can enter the frequency of a station
directly by using the numeric buttons.
1 Press TUNER repeatedly to
select the FM or AM band.
1 Press TUNER repeatedly to
2 Press TUNING + or TUNING –.
select the FM or AM band.
Press TUNING + to scan from low to
high; press TUNING – to scan from high
to low.
You can also use INPUT SELECTOR on
the receiver.
The receiver stops scanning whenever a
station is received.
2 Press D.TUNING.
3 Press the numeric buttons to
Using the controls on the
receiver
enter the frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
1 Turn INPUT SELECTOR to select the FM
or AM band.
2 Press TUNING MODE repeatedly to select
“AUTO T.”.
3 Press TUNING + or TUNING –.
4 Press ENTER.
You can also use MEMORY/ENTER on
the receiver.
In case of poor FM stereo
reception
Tip
If the FM stereo reception is poor and “ST”
flashes on the display, select monaural audio
so that the sound will be less distorted.
Press FM MODE repeatedly until the
“MONO” indicator lights up on the display.
To return to stereo mode, press FM MODE
repeatedly until the “MONO” indicator on the
display does not light up.
If you have tuned in an AM station, adjust the
direction of the AM loop antenna (aerial) for
optimum reception.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
22GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the AM tuning scale
Presetting radio stations
You can preset up to 30 FM stations and 30
AM stations. Then you can easily tune in the
stations you often listen to.
(Models of area code U, CA only)
You can change the AM tuning scale to either
9 kHz or 10 kHz using the buttons on the
receiver.
TUNER DMPORT
SA-CD/CD
TUNER
BASS
TREBLE
?/1
BD/DVD
MENU
MASTER VOLUME
1
4
7
2
5
3
INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
DISC SKIP
Numeric
buttons
6
MEMORY/
FM MODE
TUNING MODE
TUNING
ENTER
BASS
TREBLE
DISPLAY
DIMMER
MUTING
D.TUNING
8
9
PHONES
AMP
MENU
MEMORY,
ENTER
>10/
-
MEMORY AMP MENU
ENTER
0/10
CLEAR
TUNING MODE
TOOLS/
DISPLAY
OPTIONS MUTING
TV VOL
MASTER VOL
1 Press ?/1 to turn off the
,
receiver.
V/v/B/b
RETURN/EXIT
TV CH –
MENU/HOME
TV CH +
2 While holding down TUNING
PRESET – REPLAY ADVANCE PRESET +
PRESET
+/–
MODE, press ?/1.
.
<
<
>
TUNING –
TUNING +
m
M
H
3 Change the current AM tuning
scale to 9 kHz (or 10 kHz).
1 Press TUNER repeatedly to
To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure above.
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
Note
All preset stations will be erased when you change
the tuning scale.
2 Tune in the station that you
want to preset using Auto
Switch the FM reception mode, if
3 Press MEMORY.
You can also use MEMORY/ENTER on
the receiver.
“MEMORY” lights up for a few seconds.
Perform steps 4 and 5 before
“MEMORY” goes out.
continued
23GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the numeric buttons to
Using the controls on the
receiver
select a preset number.
1 Turn INPUT SELECTOR to select the FM
or AM band.
You can also press PRESET + or
PRESET – repeatedly to select a preset
number.
If “MEMORY” goes out before you
select the preset number, start again from
step 3.
2 Press TUNING MODE repeatedly to select
“PRESET T.”.
3 Press TUNING + or TUNING – repeatedly
to select the preset station you want.
5 Press ENTER.
Naming preset stations
You can also use MEMORY/ENTER on
the receiver.
1 Press TUNER repeatedly to
The station is stored as the selected preset
number.
select the FM or AM band.
If “MEMORY” goes out before you press
ENTER, start again from step 3.
You can also use INPUT SELECTOR on
the receiver.
6 Repeat steps 1 to 5 to preset
2 Tune in the preset station you
want to create an index name
another station.
Tuning to preset stations
3 Press AMP MENU.
“BALANCE” appears on the display.
1 Press TUNER repeatedly to
4 Press V/v repeatedly to select
select the FM or AM band.
“NAME IN”, then press
or b.
2 Press PRESET + or PRESET –
repeatedly to select the preset
station you want.
The cursor flashes and you can select a
character.
5 Press V/v to select a character,
then press B/b to move the
cursor to the next position.
Each time you press the button, you can
select a preset station as follows:
01
02
03
30
04
29
05
28
...
27
If you made a mistake
Press B/b until the character you want to
change flashes, then press V/v to select
the correct character.
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
Tips
•You can select the character type as follows
by pressing V/v.
Alphabet (upper case) t Numbers t
Symbols
•To enter a blank space, press b without
selecting a character.
6 Press
.
The name you entered is registered.
24GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note (Models of area code CEL, CEK
only)
When you name an RDS station and tune in that
station, the Program Service name appears instead
of the name you entered. (You cannot change the
Program Service name. The name you entered will
be overwritten by the Program Service name.)
Using the Radio Data
System (RDS)
(Models of area code CEL, CEK
only)
This receiver also allows you to use RDS
(Radio Data System), which enables radio
stations to send additional information along
with the regular program signal. You can
display RDS information.
Notes
• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.
Receiving RDS broadcasts
Simply select a station on the FM
band using direct tuning (page 22),
When you tune in a station that provides RDS
services, “RDS” lights up and the program
service name appears on the display.
Note
RDS may not work properly if the station you tuned
to is not transmitting the RDS signal properly or if
the signal strength is weak.
25GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Program type Description
indication
Displaying RDS information
While receiving an RDS station,
press DISPLAY repeatedly on the
receiver.
Each time you press the button, RDS
information on the display changes cyclically
as follows:
VARIED
Other types of programs such as
celebrity interviews, panel
games, and comedy
POP M
Popular music programs
Rock music programs
Easy Listening
ROCK M
EASY M
LIGHT M
Program Service name t Frequency t
Instrumental, vocal, and choral
music
a)
Program Type indication t Radio Text
b)
indication t Current Time indication (in
CLASSICS
OTHER M
Performances of major
orchestras, chamber music,
opera, etc.
24-hour system mode) t Volume level
a)Type of program being broadcast.
b)Text messages sent by the RDS station.
Music that does not fit into any
categories above, such as Rhythm
& Blues and Reggae
Notes
• If there is an emergency announcement by
government authorities, “ALARM” flashes in the
display.
• When the message consists of 9 characters or more,
the message scrolls across the display.
• If a station does not provide a particular RDS
service, “NO XXXX” (such as “NO TEXT”)
appears on the display.
WEATHER
FINANCE
Weather information
Stock market reports and trading,
etc.
CHILDREN
SOCIAL
Programs for children
Programs about people and the
things that affect them
RELIGION
PHONE IN
Programs of religious content
Programs where members of the
public express their views by
phone or in a public forum
Description of program types
Program type Description
indication
TRAVEL
LEISURE
Programs about travel. Not for
announcements that are located
by TP/TA.
NEWS
News programs
AFFAIRS
Topical programs that expand on
current news
Programs on recreational
activities such as gardening,
fishing, cooking, etc.
INFO
Programs offering information on
a wide spectrum of subjects,
including consumer affairs and
medical advice
JAZZ
Jazz programs
COUNTRY
NATION M
Country music programs
SPORT
Sports programs
Programs featuring the popular
music of the country or region
EDUCATE
Educational programs, such as
“how-to” and advice programs
OLDIES
FOLK M
Programs featuring oldies music
Folk music programs
DRAMA
Radio plays and serials
CULTURE
Programs about national or
regional culture, such as language
and social concerns
DOCUMENT Investigative features
NONE Any programs not defined above
SCIENCE
Programs about the natural
sciences and technology
26GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Sleep Timer
Other Operations
You can set the receiver to turn off
automatically at a specified time.
Changing the display
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
You can check the volume level, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00
t OFF
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows.
When Sleep Timer is being used, “SLEEP”
lights up on the display.
All inputs except the FM and AM
band
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
a)
Index name of the input t Selected input
t Volume level
FM and AM band
b)
Program Service name or preset station
a)
name t Frequency t Program Type
b)
b)
indication t Radio Text indication t
Current Time indication (in 24-hour system
b)
mode) t Volume level
a)Index name appears only when you have assigned
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
b)During RDS reception only (models of area code
CEL, CEK only) (page 25).
Note
Character or marks may not be displayed for some
languages.
27GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording using the
receiver
You can record onto a MiniDisc, audio tape,
video tape, etc. using the receiver. You can also
add audio from a variety of audio sources
when editing a video tape.
Using the Remote
Changing button
assignments
You can change the factory settings of the
input buttons to suit the components in your
system. For example, if you connect a DVD
recorder to the VIDEO jacks on the receiver,
you can set the VIDEO button on this remote
to control the DVD recorder.
See the operating instructions supplied with
your recording component.
1 Press one of the input buttons
to select the playback
component.
Note
You can also use INPUT SELECTOR on
the receiver.
You cannot change the settings of TUNER and
DMPORT buttons.
2 Prepare the playback
1 Hold down the input button of
which you want to change the
assignment.
component for playing.
For example, insert a CD into the CD
player.
Example: Hold down VIDEO.
3 Prepare the recording
2 Referring to the table below,
press the corresponding
button for the category you
want.
component.
Insert a blank MD or tape into the
recording component.
Example: Press 3.
Now you can use the VIDEO button to
control the DVD recorder.
4 Start recording on the
recording component, then
start playback on the playback
component.
Notes
• Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the source.
Tip
You can record the sound from any audio source
onto a video tape while copying from a video tape.
Locate the point where you want to start recording
from another audio source, select the program
source, then start playback. The audio from that
source will be recorded onto the audio track of the
video tape instead of the audio from the original
medium. To resume audio recording from the
original medium, select the video source again.
28GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Categories and the
corresponding buttons
Additional Information
Categories
Press
Precautions
VCR (command mode VTR 3)
1
2
DVD player/DVD recorder
a)
(command mode DVD1)
On safety
Should any solid object or liquid fall into the
cabinet, unplug the receiver and have it
checked by qualified personnel before
operating it any further.
DVD recorder
(command mode DVD3)
3
a)
CD player
4
5
6
7
8
Euro Digital Satellite Receiver
DVR (Digital CATV terminal)
DSS (Digital Satellite Receiver)
Blu-ray disc player
On power sources
• Before operating the receiver, check that the
operating voltage is identical with your local
power supply.
The operating voltage is indicated on the
nameplate on the back of the receiver.
• The unit is not disconnected from the AC
power source (mains) as long as it is
connected to the wall outlet, even if the unit
itself has been turned off.
b)
(command mode BD1)
Blu-ray disc recorder
(command mode BD3)
9
b)
MD deck
Tape deck
0/10
-/--
a)Sony DVD recorders are operated with a DVD1 or
DVD3 setting. For details, refer to the operating
instructions supplied with the DVD recorders.
b)For details on the BD1 or BD3 setting, refer to the
operating instructions supplied with the Blu-ray
disc player or Blu-ray disc recorder.
• If you are not going to use the receiver for a
long time, be sure to disconnect the receiver
from the wall outlet. To disconnect the AC
power cord (mains lead), grasp the plug
itself; never pull the cord.
• (Models of area code U, CA only)
One blade of the plug is wider than the other
for the purpose of safety and will fit into the
wall outlet only one way. If you are unable to
insert the plug fully into the outlet, contact
your dealer.
To clear all remote button
assignments
While holding down MASTER VOL –, press
?/1 and TV INPUT.
• The AC power cord (mains lead) must be
changed only at a qualified service shop.
The remote is reset to its factory settings.
On heat buildup
Although the receiver heats up during
operation, this is not a malfunction. If you
continuously use this receiver at a large
volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid
burning yourself, do not touch the cabinet.
continued
29GB
Download from Www.Somanuals.com. All Manuals Search And Download.
On placement
• Place the receiver in a location with adequate
ventilation to prevent heat buildup and
prolong the life of the receiver.
• Do not place the receiver near heat sources,
or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
• Do not place anything on top of the cabinet
that might block the ventilation holes and
cause malfunctions.
Troubleshooting
If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem.
Audio
• Do not place the receiver near equipment
such as a television, VCR, or tape deck. If
the receiver is being used in combination
with a television, VCR, or tape deck, and is
placed too close to that equipment, noise
may result, and picture quality may suffer.
This is especially likely when using an
indoor antenna (aerial). Therefore, we
recommend using an outdoor antenna
(aerial).
There is no sound, no matter which
component is selected, or only a very
low-level sound is heard.
• Check that the speakers and components
are connected correctly and securely.
• Check that both the receiver and all
components are turned on.
• Check that MASTER VOLUME is not set
to “VOL MIN”.
• Use caution when placing the receiver on
surfaces that have been specially treated
(with wax, oil, polish, etc.) as staining or
discoloration of the surface may result.
• Check that the SPEAKERS (OFF/A/B/
A+B) is not set to “OFF”.
• Check that headphones are not connected.
• Press MUTING to cancel the muting
function.
• Check that you have selected the correct
component with the input buttons.
• The protective device on the receiver has
been activated. Turn off the receiver,
eliminate the short-circuit problem, and
turn on the power again.
On operation
Before connecting other components, be sure
to turn off and unplug the receiver.
On cleaning
Clean the cabinet, panel, and controls with a
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent,
such as alcohol or benzine.
There is no sound from a specific
component.
• Check that the component is connected
correctly to the audio input jacks for that
component.
If you have any questions or problems
concerning your receiver, please consult your
nearest Sony dealer.
• Check that the cord(s) used for the
connection is (are) fully inserted into the
jacks on both the receiver and the
component.
30GB
Download from Www.Somanuals.com. All Manuals Search And Download.
There is no sound from one of the
speakers.
There is no sound from the component
connected to the DIGITAL MEDIA PORT
adapter.
• Adjust the volume of this receiver.
• The DIGITAL MEDIA PORT adapter
and/or component is not connected
correctly. Turn off the receiver, then
reconnect the DIGITAL MEDIA PORT
adapter and/or component.
• Connect a pair of headphones to the
PHONES jack to verify that sound is
output from the headphones. If only one
channel is output from the headphones, the
component may not be connected to the
receiver correctly. Check that all the cords
are fully inserted into the jacks on both the
receiver and the component. If both
channels are output from the headphones,
the speaker may not be connected to the
receiver correctly. Check the connection of
the speaker which is not outputting any
sound.
• Check the DIGITAL MEDIA PORT
adapter and/or component device to make
sure it supports this receiver.
Video
• Make sure you have connected to both the
L and R jacks of an analog component, and
not only to either the L or R jack. Use an
audio cord (not supplied).
There is no picture or an unclear
picture appears on the TV screen.
• Depending on the DIGITAL MEDIA
PORT adapter, video output may not be
possible.
The left and right sounds are
unbalanced or reversed.
• Check that the speakers and components
are connected correctly and securely.
• Adjust the speaker balance (page 20).
Tuner
There is severe hum or noise.
• Check that the speakers and components
are connected securely.
• Check that the connecting cords are away
from a transformer or motor, and at least
3 meters (10 feet) away from a TV set or
fluorescent light.
The FM reception is poor.
• Use a 75-ohm coaxial cable (not supplied)
to connect the receiver to an outdoor FM
antenna (aerial) as shown below. If you
connect the receiver to an outdoor antenna
(aerial), ground it against lightning. To
prevent a gas explosion, do not connect the
ground wire to a gas pipe.
• Move your audio components away from
the TV.
• The plugs and jacks are dirty. Wipe them
with a cloth slightly moistened with
alcohol.
Outdoor FM antenna (aerial)
Recording cannot be carried out.
• Check that the components are connected
correctly.
Receiver
ANTENNA
AM
• Select the source component using the
input buttons (page 18).
Ground wire
(not supplied)
To ground
continued
31GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio stations cannot be tuned in.
• Check that the antennas (aerials) are
connected securely. Adjust the antennas
(aerials) and connect an external antenna
(aerial), if necessary.
• The signal strength of the stations is too
weak (when tuning in with auto tuning).
Use direct tuning.
Error messages
If there is a malfunction, the display shows a
message. You can check the condition of the
system by the message. Refer to the following
table to solve the problem. If any problem
persists, consult your nearest Sony dealer.
• Make sure you set the tuning interval
correctly (when tuning in AM stations
with direct tuning).
• No stations have been preset or the preset
stations have been cleared (when tuning by
scanning preset stations). Preset the
stations (page 24).
PROTECT
Irregular current is output to the speakers.
The receiver will automatically turn off after
a few seconds. Check the speaker
connection and turn on the power again.
• Press DISPLAY repeatedly on the receiver
so that the frequency appears on the
display.
If the problem persist
Consult your nearest Sony dealer. Note that if
service personnel changes some parts during
repair, these parts may be retained.
RDS does not work.*
• Make sure that you are tuned to an FM
RDS station.
• Select a stronger FM station.
Reference sections for clearing
the receiver’s memory
The RDS information that you want
does not appear.*
• Contact the radio station and find out
whether they actually provide the service
in question. If so, the service may be
temporarily out of order.
To clear
See
All memorized settings
* Models of area code CEL, CEK only.
Remote commander
The remote does not function.
• Point the remote at the remote sensor on
the receiver.
• Remove any obstacles in the path between
the remote and the receiver.
• Replace all the batteries in the remote with
new ones, if they are weak.
• Make sure you select the correct input on
the remote.
32GB
Download from Www.Somanuals.com. All Manuals Search And Download.
FM tuner section
Tuning range
87.5 – 108.0 MHz
Specifications
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
AM tuner section
Tuning range
(Models of area code U only)
With 8 ohm loads, both channels driven, from
Area code
Tuning scale
20 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
10 kHz step 9 kHz step
U, CA
530 –
531 –
1,710 kHz
1,710 kHz
CEL, CEK
–
531 –
1,602 kHz
Amplifier section
1)
Models of area code U, CA, CEL, CEK
Antenna (aerial)
Intermediate frequency
450 kHz
Loop antenna (aerial)
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
90 W + 90 W
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
General
Power requirements
100 W + 100 W
Area code
U, CA
Power requirements
120 V AC, 60 Hz
1)Measured under the following conditions:
CEL, CEK
230 V AC, 50/60 Hz
Area code
U, CA
Power requirements
120 V AC, 60 Hz
Power output (DIGITAL MEDIA PORT)
DC OUT:
CEL, CEK
230 V AC, 50 Hz
5 V, 0.7 A MAX
Frequency response (Analog)
10 Hz – 70 kHz
Power consumption
Area code
Power consumption
+0.5/–2 dB (with BASS =
0 dB, TREBLE = 0 dB)
U, CA, CEL, CEK
200 W
Inputs (Analog)
Sensitivity: 500 mV/
50 kohms
Dimensions (w/h/d) (Approx.)
430 × 132.5 × 279 mm
2)
S/N : 96 dB
3)
(A, 500 mV )
(17 × 5 1/4 × 11 inches)
including projecting parts
and controls
Outputs (Analog)
AUDIO OUT
Tone
Voltage: 500 mV/10 kohms
10 dB, 1 dB step
Mass (Approx.)
6.6 kg (14 lb 9 oz)
Gain levels
2)INPUT SHORT (with BASS = 0 dB, TREBLE =
0 dB).
3)Weighted network, input level.
continued
33GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied accessories
Operating Instruction (this manual)
Quick Setup Guide (1)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Remote commander (RM-AAU055) (1)
R6 (size-AA) batteries (2)
For details on the area code of the
component you are using, see page 4.
Design and specifications are subject to
change without notice.
• Standby power consumption: 0.3 W
• Halogenated flame retardants are not used in the
certain printed wiring boards.
34GB
Download from Www.Somanuals.com. All Manuals Search And Download.
(1)
Sony Corporation Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|